diff --git a/CMakeLists.txt b/CMakeLists.txt index c544b907..57ae87b7 100644 --- a/CMakeLists.txt +++ b/CMakeLists.txt @@ -255,7 +255,7 @@ find_package(GLFW 2.7.0) find_package(PTex 2.0) find_package(PythonInterp 2.6) find_package(SWIG 1.3.40) -find_package(Doxygen) +find_package(Doxygen 1.8.4) find_package(Docutils 0.6) if (NOT APPLE AND OPENGL_FOUND) find_package(GLEW REQUIRED) @@ -383,7 +383,7 @@ else() ) endif() -if(PYTHONINTERP_FOUND AND SWIG_FOUND) +if(PYTHONINTERP_FOUND AND SWIG_FOUND AND NOT NO_PYTHON) message(STATUS "Python and SWIG found. Looking for numpy...") execute_process( COMMAND @@ -432,12 +432,6 @@ if(PYTHONINTERP_FOUND AND SWIG_FOUND) COMMAND ${PYCMD} install --user)" ) endif() -else() - message(WARNING - "Python / Swig not found : python bindings and examples will not be " - "available. If you do have Python and Swig installed and see this " - "message, please check the default FindPython.cmake module." - ) endif() # Link examples & regressions dynamically against Osd @@ -472,6 +466,43 @@ endif() #------------------------------------------------------------------------------- # General-use macros +# Macro for processing public headers into the build area for doxygen processing + +add_custom_target( public_headers ) + +macro(_add_doxy_headers headers) + + file(RELATIVE_PATH path ${CMAKE_SOURCE_DIR} ${CMAKE_CURRENT_SOURCE_DIR} ) + + string(REPLACE "/" "_" targetpath ${path}) + + foreach (header ${headers}) + + set(infile ${CMAKE_CURRENT_SOURCE_DIR}/${header}) + set(outfile ${CMAKE_BINARY_DIR}/public_headers/${path}/${header}) + set(targetname "${targetpath}_${header}") + + add_custom_command( + OUTPUT + ${outfile} + COMMAND + ${CMAKE_COMMAND} + ARGS + -E copy ${infile} ${outfile} + DEPENDS + ${infile} + ) + + add_custom_target(${targetname} DEPENDS ${outfile}) + + list(APPEND headerfiles ${targetname} ) + endforeach() + + add_dependencies( public_headers DEPENDS ${headerfiles} ) + +endmacro() + + # Macro for adding a cuda executable if cuda is found and a regular # executable otherwise. macro(_add_possibly_cuda_executable target) @@ -522,10 +553,12 @@ endmacro() add_subdirectory(opensubdiv) -if(NOT ANDROID AND NOT IOS) # XXXdyu +if (NOT NO_REGRESSION AND NOT ANDROID AND NOT IOS) # XXXdyu add_subdirectory(regression) endif() -add_subdirectory(examples) +if (NOT NO_EXAMPLES) + add_subdirectory(examples) +endif() add_subdirectory(documentation) diff --git a/documentation/CMakeLists.txt b/documentation/CMakeLists.txt index 52c641b5..7c7dfe05 100644 --- a/documentation/CMakeLists.txt +++ b/documentation/CMakeLists.txt @@ -64,12 +64,21 @@ if (NOT NO_DOC) add_custom_target(doc_doxy ${DOXYGEN_EXECUTABLE} ${CMAKE_CURRENT_BINARY_DIR}/OpenSubdiv.doxy WORKING_DIRECTORY - ${CMAKE_INSTALL_PREFIX}/include + ${CMAKE_BINARY_DIR}/public_headers/ + DEPENDS + public_headers COMMENT "Generating API documentation with Doxygen" VERBATIM ) list(APPEND DOC_TARGETS doc_doxy) + + install( + DIRECTORY + ${CMAKE_CURRENT_BINARY_DIR}/doxy_html + DESTINATION + ${CMAKE_INSTALL_PREFIX}/documentation + ) else() @@ -80,7 +89,7 @@ if (NOT NO_DOC) - if (DOCUTILS_FOUND) + if (DOCUTILS_FOUND AND PYTHONINTERP_FOUND) set(HTML_FILES search.html @@ -125,7 +134,7 @@ if (NOT NO_DOC) ${infile} ) - add_custom_target(${src} ALL DEPENDS ${outfile}) + add_custom_target(${src} DEPENDS ${outfile}) list(APPEND RST_TARGETS ${src}) @@ -154,7 +163,7 @@ if (NOT NO_DOC) -E copy ${infile} ${outfile} ) - add_custom_target( ${src} ALL DEPENDS ${outfile}) + add_custom_target( ${src} DEPENDS ${outfile}) list(APPEND HTML_TARGETS ${src}) @@ -166,41 +175,62 @@ if (NOT NO_DOC) ) endforeach() + # copy the site resources to the build area so that the + # documentation can be read without an install + add_custom_target(doc_html_images + COMMAND + ${CMAKE_COMMAND} -E copy_directory ${CMAKE_CURRENT_SOURCE_DIR}/images ${CMAKE_CURRENT_BINARY_DIR}/images + ) + + add_custom_target(doc_html_css + COMMAND + ${CMAKE_COMMAND} -E copy_directory ${CMAKE_CURRENT_SOURCE_DIR}/css ${CMAKE_CURRENT_BINARY_DIR}/css + ) + + add_custom_target(doc_tipuesearch + COMMAND + ${CMAKE_COMMAND} -E copy_directory ${CMAKE_CURRENT_SOURCE_DIR}/tipuesearch ${CMAKE_CURRENT_BINARY_DIR}/tipuesearch + ) + # build search index and insert navigation tab - if (PYTHONINTERP_FOUND) + add_custom_target(search_index + COMMAND + ${PYTHON_EXECUTABLE} + ${CMAKE_CURRENT_SOURCE_DIR}/processHtml.py + ${CMAKE_CURRENT_BINARY_DIR} + ${CMAKE_CURRENT_SOURCE_DIR}/nav_template.txt + DEPENDS + ${HTML_TARGETS} ${RST_TARGETS} doc_tipuesearch + ) + + add_custom_target(doc_html + DEPENDS + search_index + ${HTML_TARGETS} + ${RST_TARGETS} + doc_html_images + doc_html_css + doc_tipuesearch + ) + + install( + DIRECTORY + ${CMAKE_CURRENT_BINARY_DIR}/tipuesearch + DESTINATION + ${CMAKE_INSTALL_PREFIX}/documentation + ) - add_custom_target(search_index ALL - COMMAND - ${PYTHON_EXECUTABLE} - ${CMAKE_CURRENT_SOURCE_DIR}/processHtml.py - ${CMAKE_CURRENT_BINARY_DIR} - ${CMAKE_INSTALL_PREFIX}/documentation - ${CMAKE_CURRENT_SOURCE_DIR}/nav_template.txt - DEPENDS - ${HTML_TARGETS} ${RST_TARGETS} - ) - - install( - DIRECTORY - tipuesearch - DESTINATION - ${CMAKE_INSTALL_PREFIX}/documentation - ) - endif() - - - add_custom_target(doc_html DEPENDS ${HTML_TARGETS} ${RST_TARGETS} ) install( DIRECTORY - images + ${CMAKE_CURRENT_BINARY_DIR}/images DESTINATION ${CMAKE_INSTALL_PREFIX}/documentation ) install( DIRECTORY - css + ${CMAKE_CURRENT_BINARY_DIR}/css DESTINATION ${CMAKE_INSTALL_PREFIX}/documentation ) @@ -208,6 +238,6 @@ if (NOT NO_DOC) list(APPEND DOC_TARGETS doc_html) endif() - add_custom_target(doc DEPENDS ${DOC_TARGETS}) + add_custom_target(doc ALL DEPENDS ${DOC_TARGETS}) endif() diff --git a/documentation/OpenSubdiv.doxy b/documentation/OpenSubdiv.doxy index e47ed01c..bae5bed9 100644 --- a/documentation/OpenSubdiv.doxy +++ b/documentation/OpenSubdiv.doxy @@ -1,103 +1,105 @@ -# Doxyfile 1.7.5 +# Doxyfile 1.8.4 # This file describes the settings to be used by the documentation system -# doxygen (www.doxygen.org) for a project +# doxygen (www.doxygen.org) for a project. # -# All text after a hash (#) is considered a comment and will be ignored +# All text after a double hash (##) is considered a comment and is placed +# in front of the TAG it is preceding . +# All text after a hash (#) is considered a comment and will be ignored. # The format is: # TAG = value [value, ...] # For lists items can also be appended using: # TAG += value [value, ...] -# Values that contain spaces should be placed between quotes (" ") +# Values that contain spaces should be placed between quotes (" "). #--------------------------------------------------------------------------- # Project related configuration options #--------------------------------------------------------------------------- -# This tag specifies the encoding used for all characters in the config file -# that follow. The default is UTF-8 which is also the encoding used for all -# text before the first occurrence of this tag. Doxygen uses libiconv (or the -# iconv built into libc) for the transcoding. See +# This tag specifies the encoding used for all characters in the config file +# that follow. The default is UTF-8 which is also the encoding used for all +# text before the first occurrence of this tag. Doxygen uses libiconv (or the +# iconv built into libc) for the transcoding. See # http://www.gnu.org/software/libiconv for the list of possible encodings. DOXYFILE_ENCODING = UTF-8 -# The PROJECT_NAME tag is a single word (or sequence of words) that should -# identify the project. Note that if you do not use Doxywizard you need +# The PROJECT_NAME tag is a single word (or sequence of words) that should +# identify the project. Note that if you do not use Doxywizard you need # to put quotes around the project name if it contains spaces. -PROJECT_NAME = +PROJECT_NAME = -# The PROJECT_NUMBER tag can be used to enter a project or revision number. -# This could be handy for archiving the generated documentation or +# The PROJECT_NUMBER tag can be used to enter a project or revision number. +# This could be handy for archiving the generated documentation or # if some version control system is used. -PROJECT_NUMBER = +PROJECT_NUMBER = -# Using the PROJECT_BRIEF tag one can provide an optional one line description -# for a project that appears at the top of each page and should give viewer +# Using the PROJECT_BRIEF tag one can provide an optional one line description +# for a project that appears at the top of each page and should give viewer # a quick idea about the purpose of the project. Keep the description short. -PROJECT_BRIEF = +PROJECT_BRIEF = -# With the PROJECT_LOGO tag one can specify an logo or icon that is -# included in the documentation. The maximum height of the logo should not -# exceed 55 pixels and the maximum width should not exceed 200 pixels. +# With the PROJECT_LOGO tag one can specify an logo or icon that is +# included in the documentation. The maximum height of the logo should not +# exceed 55 pixels and the maximum width should not exceed 200 pixels. # Doxygen will copy the logo to the output directory. PROJECT_LOGO = @CMAKE_CURRENT_SOURCE_DIR@/images/openSubdivHeaderBGLeft2.png -# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) -# base path where the generated documentation will be put. -# If a relative path is entered, it will be relative to the location +# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) +# base path where the generated documentation will be put. +# If a relative path is entered, it will be relative to the location # where doxygen was started. If left blank the current directory will be used. -OUTPUT_DIRECTORY = @CMAKE_INSTALL_PREFIX@/documentation +OUTPUT_DIRECTORY = @CMAKE_CURRENT_BINARY_DIR@/ -# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create -# 4096 sub-directories (in 2 levels) under the output directory of each output -# format and will distribute the generated files over these directories. -# Enabling this option can be useful when feeding doxygen a huge amount of -# source files, where putting all generated files in the same directory would +# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create +# 4096 sub-directories (in 2 levels) under the output directory of each output +# format and will distribute the generated files over these directories. +# Enabling this option can be useful when feeding doxygen a huge amount of +# source files, where putting all generated files in the same directory would # otherwise cause performance problems for the file system. CREATE_SUBDIRS = NO -# The OUTPUT_LANGUAGE tag is used to specify the language in which all -# documentation generated by doxygen is written. Doxygen will use this -# information to generate all constant output in the proper language. -# The default language is English, other supported languages are: -# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, -# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German, -# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English -# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, -# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak, -# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. +# The OUTPUT_LANGUAGE tag is used to specify the language in which all +# documentation generated by doxygen is written. Doxygen will use this +# information to generate all constant output in the proper language. +# The default language is English, other supported languages are: +# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, +# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German, +# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English +# messages), Korean, Korean-en, Latvian, Lithuanian, Norwegian, Macedonian, +# Persian, Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, +# Slovak, Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. OUTPUT_LANGUAGE = English -# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will -# include brief member descriptions after the members that are listed in -# the file and class documentation (similar to JavaDoc). +# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will +# include brief member descriptions after the members that are listed in +# the file and class documentation (similar to JavaDoc). # Set to NO to disable this. BRIEF_MEMBER_DESC = YES -# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend -# the brief description of a member or function before the detailed description. -# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the +# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend +# the brief description of a member or function before the detailed description. +# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the # brief descriptions will be completely suppressed. REPEAT_BRIEF = YES -# This tag implements a quasi-intelligent brief description abbreviator -# that is used to form the text in various listings. Each string -# in this list, if found as the leading text of the brief description, will be -# stripped from the text and the result after processing the whole list, is -# used as the annotated text. Otherwise, the brief description is used as-is. -# If left blank, the following values are used ("$name" is automatically -# replaced with the name of the entity): "The $name class" "The $name widget" -# "The $name file" "is" "provides" "specifies" "contains" +# This tag implements a quasi-intelligent brief description abbreviator +# that is used to form the text in various listings. Each string +# in this list, if found as the leading text of the brief description, will be +# stripped from the text and the result after processing the whole list, is +# used as the annotated text. Otherwise, the brief description is used as-is. +# If left blank, the following values are used ("$name" is automatically +# replaced with the name of the entity): "The $name class" "The $name widget" +# "The $name file" "is" "provides" "specifies" "contains" # "represents" "a" "an" "the" ABBREVIATE_BRIEF = "The $name class" \ @@ -112,548 +114,572 @@ ABBREVIATE_BRIEF = "The $name class" \ an \ the -# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then -# Doxygen will generate a detailed section even if there is only a brief +# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then +# Doxygen will generate a detailed section even if there is only a brief # description. ALWAYS_DETAILED_SEC = NO -# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all -# inherited members of a class in the documentation of that class as if those -# members were ordinary class members. Constructors, destructors and assignment +# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all +# inherited members of a class in the documentation of that class as if those +# members were ordinary class members. Constructors, destructors and assignment # operators of the base classes will not be shown. INLINE_INHERITED_MEMB = NO -# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full -# path before files name in the file list and in the header files. If set +# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full +# path before files name in the file list and in the header files. If set # to NO the shortest path that makes the file name unique will be used. FULL_PATH_NAMES = YES -# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag -# can be used to strip a user-defined part of the path. Stripping is -# only done if one of the specified strings matches the left-hand part of -# the path. The tag can be used to show relative paths in the file list. -# If left blank the directory from which doxygen is run is used as the -# path to strip. +# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag +# can be used to strip a user-defined part of the path. Stripping is +# only done if one of the specified strings matches the left-hand part of +# the path. The tag can be used to show relative paths in the file list. +# If left blank the directory from which doxygen is run is used as the +# path to strip. Note that you specify absolute paths here, but also +# relative paths, which will be relative from the directory where doxygen is +# started. -STRIP_FROM_PATH = +STRIP_FROM_PATH = -# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of -# the path mentioned in the documentation of a class, which tells -# the reader which header file to include in order to use a class. -# If left blank only the name of the header file containing the class -# definition is used. Otherwise one should specify the include paths that +# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of +# the path mentioned in the documentation of a class, which tells +# the reader which header file to include in order to use a class. +# If left blank only the name of the header file containing the class +# definition is used. Otherwise one should specify the include paths that # are normally passed to the compiler using the -I flag. -STRIP_FROM_INC_PATH = +STRIP_FROM_INC_PATH = -# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter -# (but less readable) file names. This can be useful if your file system +# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter +# (but less readable) file names. This can be useful if your file system # doesn't support long names like on DOS, Mac, or CD-ROM. SHORT_NAMES = YES -# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen -# will interpret the first line (until the first dot) of a JavaDoc-style -# comment as the brief description. If set to NO, the JavaDoc -# comments will behave just like regular Qt-style comments +# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen +# will interpret the first line (until the first dot) of a JavaDoc-style +# comment as the brief description. If set to NO, the JavaDoc +# comments will behave just like regular Qt-style comments # (thus requiring an explicit @brief command for a brief description.) JAVADOC_AUTOBRIEF = NO -# If the QT_AUTOBRIEF tag is set to YES then Doxygen will -# interpret the first line (until the first dot) of a Qt-style -# comment as the brief description. If set to NO, the comments -# will behave just like regular Qt-style comments (thus requiring +# If the QT_AUTOBRIEF tag is set to YES then Doxygen will +# interpret the first line (until the first dot) of a Qt-style +# comment as the brief description. If set to NO, the comments +# will behave just like regular Qt-style comments (thus requiring # an explicit \brief command for a brief description.) QT_AUTOBRIEF = NO -# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen -# treat a multi-line C++ special comment block (i.e. a block of //! or /// -# comments) as a brief description. This used to be the default behaviour. -# The new default is to treat a multi-line C++ comment block as a detailed +# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen +# treat a multi-line C++ special comment block (i.e. a block of //! or /// +# comments) as a brief description. This used to be the default behaviour. +# The new default is to treat a multi-line C++ comment block as a detailed # description. Set this tag to YES if you prefer the old behaviour instead. MULTILINE_CPP_IS_BRIEF = NO -# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented -# member inherits the documentation from any documented member that it +# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented +# member inherits the documentation from any documented member that it # re-implements. INHERIT_DOCS = YES -# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce -# a new page for each member. If set to NO, the documentation of a member will +# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce +# a new page for each member. If set to NO, the documentation of a member will # be part of the file/class/namespace that contains it. SEPARATE_MEMBER_PAGES = NO -# The TAB_SIZE tag can be used to set the number of spaces in a tab. +# The TAB_SIZE tag can be used to set the number of spaces in a tab. # Doxygen uses this value to replace tabs by spaces in code fragments. TAB_SIZE = 8 -# This tag can be used to specify a number of aliases that acts -# as commands in the documentation. An alias has the form "name=value". -# For example adding "sideeffect=\par Side Effects:\n" will allow you to -# put the command \sideeffect (or @sideeffect) in the documentation, which -# will result in a user-defined paragraph with heading "Side Effects:". +# This tag can be used to specify a number of aliases that acts +# as commands in the documentation. An alias has the form "name=value". +# For example adding "sideeffect=\par Side Effects:\n" will allow you to +# put the command \sideeffect (or @sideeffect) in the documentation, which +# will result in a user-defined paragraph with heading "Side Effects:". # You can put \n's in the value part of an alias to insert newlines. -ALIASES = +ALIASES = -# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C -# sources only. Doxygen will then generate output that is more tailored for C. -# For instance, some of the names that are used will be different. The list +# This tag can be used to specify a number of word-keyword mappings (TCL only). +# A mapping has the form "name=value". For example adding +# "class=itcl::class" will allow you to use the command class in the +# itcl::class meaning. + +TCL_SUBST = + +# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C +# sources only. Doxygen will then generate output that is more tailored for C. +# For instance, some of the names that are used will be different. The list # of all members will be omitted, etc. OPTIMIZE_OUTPUT_FOR_C = NO -# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java -# sources only. Doxygen will then generate output that is more tailored for -# Java. For instance, namespaces will be presented as packages, qualified +# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java +# sources only. Doxygen will then generate output that is more tailored for +# Java. For instance, namespaces will be presented as packages, qualified # scopes will look different, etc. OPTIMIZE_OUTPUT_JAVA = NO -# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran -# sources only. Doxygen will then generate output that is more tailored for +# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran +# sources only. Doxygen will then generate output that is more tailored for # Fortran. OPTIMIZE_FOR_FORTRAN = NO -# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL -# sources. Doxygen will then generate output that is tailored for +# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL +# sources. Doxygen will then generate output that is tailored for # VHDL. OPTIMIZE_OUTPUT_VHDL = NO -# Doxygen selects the parser to use depending on the extension of the files it -# parses. With this tag you can assign which parser to use for a given extension. -# Doxygen has a built-in mapping, but you can override or extend it using this -# tag. The format is ext=language, where ext is a file extension, and language -# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C, -# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make -# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C -# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions -# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen. +# Doxygen selects the parser to use depending on the extension of the files it +# parses. With this tag you can assign which parser to use for a given +# extension. Doxygen has a built-in mapping, but you can override or extend it +# using this tag. The format is ext=language, where ext is a file extension, +# and language is one of the parsers supported by doxygen: IDL, Java, +# Javascript, CSharp, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, +# C++. For instance to make doxygen treat .inc files as Fortran files (default +# is PHP), and .f files as C (default is Fortran), use: inc=Fortran f=C. Note +# that for custom extensions you also need to set FILE_PATTERNS otherwise the +# files are not read by doxygen. -EXTENSION_MAPPING = +EXTENSION_MAPPING = -# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want -# to include (a tag file for) the STL sources as input, then you should -# set this tag to YES in order to let doxygen match functions declarations and -# definitions whose arguments contain STL classes (e.g. func(std::string); v.s. -# func(std::string) {}). This also makes the inheritance and collaboration +# If MARKDOWN_SUPPORT is enabled (the default) then doxygen pre-processes all +# comments according to the Markdown format, which allows for more readable +# documentation. See http://daringfireball.net/projects/markdown/ for details. +# The output of markdown processing is further processed by doxygen, so you +# can mix doxygen, HTML, and XML commands with Markdown formatting. +# Disable only in case of backward compatibilities issues. + +MARKDOWN_SUPPORT = YES + +# When enabled doxygen tries to link words that correspond to documented +# classes, or namespaces to their corresponding documentation. Such a link can +# be prevented in individual cases by by putting a % sign in front of the word +# or globally by setting AUTOLINK_SUPPORT to NO. + +AUTOLINK_SUPPORT = YES + +# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want +# to include (a tag file for) the STL sources as input, then you should +# set this tag to YES in order to let doxygen match functions declarations and +# definitions whose arguments contain STL classes (e.g. func(std::string); v.s. +# func(std::string) {}). This also makes the inheritance and collaboration # diagrams that involve STL classes more complete and accurate. BUILTIN_STL_SUPPORT = NO -# If you use Microsoft's C++/CLI language, you should set this option to YES to +# If you use Microsoft's C++/CLI language, you should set this option to YES to # enable parsing support. CPP_CLI_SUPPORT = NO -# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only. -# Doxygen will parse them like normal C++ but will assume all classes use public +# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only. +# Doxygen will parse them like normal C++ but will assume all classes use public # instead of private inheritance when no explicit protection keyword is present. SIP_SUPPORT = NO -# For Microsoft's IDL there are propget and propput attributes to indicate getter -# and setter methods for a property. Setting this option to YES (the default) -# will make doxygen replace the get and set methods by a property in the -# documentation. This will only work if the methods are indeed getting or -# setting a simple type. If this is not the case, or you want to show the +# For Microsoft's IDL there are propget and propput attributes to indicate +# getter and setter methods for a property. Setting this option to YES (the +# default) will make doxygen replace the get and set methods by a property in +# the documentation. This will only work if the methods are indeed getting or +# setting a simple type. If this is not the case, or you want to show the # methods anyway, you should set this option to NO. IDL_PROPERTY_SUPPORT = YES -# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC -# tag is set to YES, then doxygen will reuse the documentation of the first -# member in the group (if any) for the other members of the group. By default +# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC +# tag is set to YES, then doxygen will reuse the documentation of the first +# member in the group (if any) for the other members of the group. By default # all members of a group must be documented explicitly. DISTRIBUTE_GROUP_DOC = NO -# Set the SUBGROUPING tag to YES (the default) to allow class member groups of -# the same type (for instance a group of public functions) to be put as a -# subgroup of that type (e.g. under the Public Functions section). Set it to -# NO to prevent subgrouping. Alternatively, this can be done per class using +# Set the SUBGROUPING tag to YES (the default) to allow class member groups of +# the same type (for instance a group of public functions) to be put as a +# subgroup of that type (e.g. under the Public Functions section). Set it to +# NO to prevent subgrouping. Alternatively, this can be done per class using # the \nosubgrouping command. SUBGROUPING = YES -# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and -# unions are shown inside the group in which they are included (e.g. using -# @ingroup) instead of on a separate page (for HTML and Man pages) or +# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and +# unions are shown inside the group in which they are included (e.g. using +# @ingroup) instead of on a separate page (for HTML and Man pages) or # section (for LaTeX and RTF). INLINE_GROUPED_CLASSES = NO -# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and -# unions with only public data fields will be shown inline in the documentation -# of the scope in which they are defined (i.e. file, namespace, or group -# documentation), provided this scope is documented. If set to NO (the default), -# structs, classes, and unions are shown on a separate page (for HTML and Man -# pages) or section (for LaTeX and RTF). +# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and +# unions with only public data fields or simple typedef fields will be shown +# inline in the documentation of the scope in which they are defined (i.e. file, +# namespace, or group documentation), provided this scope is documented. If set +# to NO (the default), structs, classes, and unions are shown on a separate +# page (for HTML and Man pages) or section (for LaTeX and RTF). INLINE_SIMPLE_STRUCTS = NO -# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum -# is documented as struct, union, or enum with the name of the typedef. So -# typedef struct TypeS {} TypeT, will appear in the documentation as a struct -# with name TypeT. When disabled the typedef will appear as a member of a file, -# namespace, or class. And the struct will be named TypeS. This can typically -# be useful for C code in case the coding convention dictates that all compound +# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum +# is documented as struct, union, or enum with the name of the typedef. So +# typedef struct TypeS {} TypeT, will appear in the documentation as a struct +# with name TypeT. When disabled the typedef will appear as a member of a file, +# namespace, or class. And the struct will be named TypeS. This can typically +# be useful for C code in case the coding convention dictates that all compound # types are typedef'ed and only the typedef is referenced, never the tag name. TYPEDEF_HIDES_STRUCT = NO -# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to -# determine which symbols to keep in memory and which to flush to disk. -# When the cache is full, less often used symbols will be written to disk. -# For small to medium size projects (<1000 input files) the default value is -# probably good enough. For larger projects a too small cache size can cause -# doxygen to be busy swapping symbols to and from disk most of the time -# causing a significant performance penalty. -# If the system has enough physical memory increasing the cache will improve the -# performance by keeping more symbols in memory. Note that the value works on -# a logarithmic scale so increasing the size by one will roughly double the -# memory usage. The cache size is given by this formula: -# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols +# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This +# cache is used to resolve symbols given their name and scope. Since this can +# be an expensive process and often the same symbol appear multiple times in +# the code, doxygen keeps a cache of pre-resolved symbols. If the cache is too +# small doxygen will become slower. If the cache is too large, memory is wasted. +# The cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid +# range is 0..9, the default is 0, corresponding to a cache size of 2^16 = 65536 +# symbols. -SYMBOL_CACHE_SIZE = 0 +LOOKUP_CACHE_SIZE = 0 #--------------------------------------------------------------------------- # Build related configuration options #--------------------------------------------------------------------------- -# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in -# documentation are documented, even if no documentation was available. -# Private class members and static file members will be hidden unless -# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES +# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in +# documentation are documented, even if no documentation was available. +# Private class members and static file members will be hidden unless +# the EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES EXTRACT_ALL = YES -# If the EXTRACT_PRIVATE tag is set to YES all private members of a class +# If the EXTRACT_PRIVATE tag is set to YES all private members of a class # will be included in the documentation. EXTRACT_PRIVATE = NO -# If the EXTRACT_STATIC tag is set to YES all static members of a file +# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal +# scope will be included in the documentation. + +EXTRACT_PACKAGE = NO + +# If the EXTRACT_STATIC tag is set to YES all static members of a file # will be included in the documentation. EXTRACT_STATIC = NO -# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) -# defined locally in source files will be included in the documentation. +# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) +# defined locally in source files will be included in the documentation. # If set to NO only classes defined in header files are included. EXTRACT_LOCAL_CLASSES = YES -# This flag is only useful for Objective-C code. When set to YES local -# methods, which are defined in the implementation section but not in -# the interface are included in the documentation. +# This flag is only useful for Objective-C code. When set to YES local +# methods, which are defined in the implementation section but not in +# the interface are included in the documentation. # If set to NO (the default) only methods in the interface are included. EXTRACT_LOCAL_METHODS = NO -# If this flag is set to YES, the members of anonymous namespaces will be -# extracted and appear in the documentation as a namespace called -# 'anonymous_namespace{file}', where file will be replaced with the base -# name of the file that contains the anonymous namespace. By default +# If this flag is set to YES, the members of anonymous namespaces will be +# extracted and appear in the documentation as a namespace called +# 'anonymous_namespace{file}', where file will be replaced with the base +# name of the file that contains the anonymous namespace. By default # anonymous namespaces are hidden. EXTRACT_ANON_NSPACES = NO -# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all -# undocumented members of documented classes, files or namespaces. -# If set to NO (the default) these members will be included in the -# various overviews, but no documentation section is generated. +# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all +# undocumented members of documented classes, files or namespaces. +# If set to NO (the default) these members will be included in the +# various overviews, but no documentation section is generated. # This option has no effect if EXTRACT_ALL is enabled. HIDE_UNDOC_MEMBERS = NO -# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all -# undocumented classes that are normally visible in the class hierarchy. -# If set to NO (the default) these classes will be included in the various +# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all +# undocumented classes that are normally visible in the class hierarchy. +# If set to NO (the default) these classes will be included in the various # overviews. This option has no effect if EXTRACT_ALL is enabled. HIDE_UNDOC_CLASSES = NO -# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all -# friend (class|struct|union) declarations. -# If set to NO (the default) these declarations will be included in the +# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all +# friend (class|struct|union) declarations. +# If set to NO (the default) these declarations will be included in the # documentation. HIDE_FRIEND_COMPOUNDS = NO -# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any -# documentation blocks found inside the body of a function. -# If set to NO (the default) these blocks will be appended to the +# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any +# documentation blocks found inside the body of a function. +# If set to NO (the default) these blocks will be appended to the # function's detailed documentation block. HIDE_IN_BODY_DOCS = NO -# The INTERNAL_DOCS tag determines if documentation -# that is typed after a \internal command is included. If the tag is set -# to NO (the default) then the documentation will be excluded. +# The INTERNAL_DOCS tag determines if documentation +# that is typed after a \internal command is included. If the tag is set +# to NO (the default) then the documentation will be excluded. # Set it to YES to include the internal documentation. INTERNAL_DOCS = NO -# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate -# file names in lower-case letters. If set to YES upper-case letters are also -# allowed. This is useful if you have classes or files whose names only differ -# in case and if your file system supports case sensitive file names. Windows +# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate +# file names in lower-case letters. If set to YES upper-case letters are also +# allowed. This is useful if you have classes or files whose names only differ +# in case and if your file system supports case sensitive file names. Windows # and Mac users are advised to set this option to NO. CASE_SENSE_NAMES = NO -# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen -# will show members with their full class and namespace scopes in the +# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen +# will show members with their full class and namespace scopes in the # documentation. If set to YES the scope will be hidden. HIDE_SCOPE_NAMES = YES -# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen -# will put a list of the files that are included by a file in the documentation +# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen +# will put a list of the files that are included by a file in the documentation # of that file. SHOW_INCLUDE_FILES = YES -# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen -# will list include files with double quotes in the documentation +# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen +# will list include files with double quotes in the documentation # rather than with sharp brackets. FORCE_LOCAL_INCLUDES = NO -# If the INLINE_INFO tag is set to YES (the default) then a tag [inline] +# If the INLINE_INFO tag is set to YES (the default) then a tag [inline] # is inserted in the documentation for inline members. INLINE_INFO = YES -# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen -# will sort the (detailed) documentation of file and class members -# alphabetically by member name. If set to NO the members will appear in +# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen +# will sort the (detailed) documentation of file and class members +# alphabetically by member name. If set to NO the members will appear in # declaration order. SORT_MEMBER_DOCS = YES -# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the -# brief documentation of file, namespace and class members alphabetically -# by member name. If set to NO (the default) the members will appear in +# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the +# brief documentation of file, namespace and class members alphabetically +# by member name. If set to NO (the default) the members will appear in # declaration order. SORT_BRIEF_DOCS = NO -# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen -# will sort the (brief and detailed) documentation of class members so that -# constructors and destructors are listed first. If set to NO (the default) -# the constructors will appear in the respective orders defined by -# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS. -# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO +# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen +# will sort the (brief and detailed) documentation of class members so that +# constructors and destructors are listed first. If set to NO (the default) +# the constructors will appear in the respective orders defined by +# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS. +# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO # and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO. SORT_MEMBERS_CTORS_1ST = NO -# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the -# hierarchy of group names into alphabetical order. If set to NO (the default) +# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the +# hierarchy of group names into alphabetical order. If set to NO (the default) # the group names will appear in their defined order. SORT_GROUP_NAMES = NO -# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be -# sorted by fully-qualified names, including namespaces. If set to -# NO (the default), the class list will be sorted only by class name, -# not including the namespace part. -# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES. -# Note: This option applies only to the class list, not to the +# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be +# sorted by fully-qualified names, including namespaces. If set to +# NO (the default), the class list will be sorted only by class name, +# not including the namespace part. +# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES. +# Note: This option applies only to the class list, not to the # alphabetical list. SORT_BY_SCOPE_NAME = NO -# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to -# do proper type resolution of all parameters of a function it will reject a -# match between the prototype and the implementation of a member function even -# if there is only one candidate or it is obvious which candidate to choose -# by doing a simple string match. By disabling STRICT_PROTO_MATCHING doxygen +# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to +# do proper type resolution of all parameters of a function it will reject a +# match between the prototype and the implementation of a member function even +# if there is only one candidate or it is obvious which candidate to choose +# by doing a simple string match. By disabling STRICT_PROTO_MATCHING doxygen # will still accept a match between prototype and implementation in such cases. STRICT_PROTO_MATCHING = NO -# The GENERATE_TODOLIST tag can be used to enable (YES) or -# disable (NO) the todo list. This list is created by putting \todo +# The GENERATE_TODOLIST tag can be used to enable (YES) or +# disable (NO) the todo list. This list is created by putting \todo # commands in the documentation. GENERATE_TODOLIST = YES -# The GENERATE_TESTLIST tag can be used to enable (YES) or -# disable (NO) the test list. This list is created by putting \test +# The GENERATE_TESTLIST tag can be used to enable (YES) or +# disable (NO) the test list. This list is created by putting \test # commands in the documentation. GENERATE_TESTLIST = YES -# The GENERATE_BUGLIST tag can be used to enable (YES) or -# disable (NO) the bug list. This list is created by putting \bug +# The GENERATE_BUGLIST tag can be used to enable (YES) or +# disable (NO) the bug list. This list is created by putting \bug # commands in the documentation. GENERATE_BUGLIST = YES -# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or -# disable (NO) the deprecated list. This list is created by putting +# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or +# disable (NO) the deprecated list. This list is created by putting # \deprecated commands in the documentation. GENERATE_DEPRECATEDLIST= YES -# The ENABLED_SECTIONS tag can be used to enable conditional -# documentation sections, marked by \if sectionname ... \endif. +# The ENABLED_SECTIONS tag can be used to enable conditional +# documentation sections, marked by \if section-label ... \endif +# and \cond section-label ... \endcond blocks. -ENABLED_SECTIONS = +ENABLED_SECTIONS = -# The MAX_INITIALIZER_LINES tag determines the maximum number of lines -# the initial value of a variable or macro consists of for it to appear in -# the documentation. If the initializer consists of more lines than specified -# here it will be hidden. Use a value of 0 to hide initializers completely. -# The appearance of the initializer of individual variables and macros in the -# documentation can be controlled using \showinitializer or \hideinitializer +# The MAX_INITIALIZER_LINES tag determines the maximum number of lines +# the initial value of a variable or macro consists of for it to appear in +# the documentation. If the initializer consists of more lines than specified +# here it will be hidden. Use a value of 0 to hide initializers completely. +# The appearance of the initializer of individual variables and macros in the +# documentation can be controlled using \showinitializer or \hideinitializer # command in the documentation regardless of this setting. MAX_INITIALIZER_LINES = 30 -# Set the SHOW_USED_FILES tag to NO to disable the list of files generated -# at the bottom of the documentation of classes and structs. If set to YES the +# Set the SHOW_USED_FILES tag to NO to disable the list of files generated +# at the bottom of the documentation of classes and structs. If set to YES the # list will mention the files that were used to generate the documentation. SHOW_USED_FILES = YES -# If the sources in your project are distributed over multiple directories -# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy -# in the documentation. The default is NO. - -SHOW_DIRECTORIES = NO - -# Set the SHOW_FILES tag to NO to disable the generation of the Files page. -# This will remove the Files entry from the Quick Index and from the +# Set the SHOW_FILES tag to NO to disable the generation of the Files page. +# This will remove the Files entry from the Quick Index and from the # Folder Tree View (if specified). The default is YES. SHOW_FILES = YES -# Set the SHOW_NAMESPACES tag to NO to disable the generation of the -# Namespaces page. This will remove the Namespaces entry from the Quick Index +# Set the SHOW_NAMESPACES tag to NO to disable the generation of the +# Namespaces page. +# This will remove the Namespaces entry from the Quick Index # and from the Folder Tree View (if specified). The default is YES. SHOW_NAMESPACES = YES -# The FILE_VERSION_FILTER tag can be used to specify a program or script that -# doxygen should invoke to get the current version for each file (typically from -# the version control system). Doxygen will invoke the program by executing (via -# popen()) the command , where is the value of -# the FILE_VERSION_FILTER tag, and is the name of an input file -# provided by doxygen. Whatever the program writes to standard output +# The FILE_VERSION_FILTER tag can be used to specify a program or script that +# doxygen should invoke to get the current version for each file (typically from +# the version control system). Doxygen will invoke the program by executing (via +# popen()) the command , where is the value of +# the FILE_VERSION_FILTER tag, and is the name of an input file +# provided by doxygen. Whatever the program writes to standard output # is used as the file version. See the manual for examples. -FILE_VERSION_FILTER = +FILE_VERSION_FILTER = -# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed -# by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. The create the layout file -# that represents doxygen's defaults, run doxygen with the -l option. -# You can optionally specify a file name after the option, if omitted +# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed +# by doxygen. The layout file controls the global structure of the generated +# output files in an output format independent way. To create the layout file +# that represents doxygen's defaults, run doxygen with the -l option. +# You can optionally specify a file name after the option, if omitted # DoxygenLayout.xml will be used as the name of the layout file. -LAYOUT_FILE = +LAYOUT_FILE = -# The CITE_BIB_FILES tag can be used to specify one or more bib files -# containing the references data. This must be a list of .bib files. The -# .bib extension is automatically appended if omitted. Using this command -# requires the bibtex tool to be installed. See also -# http://en.wikipedia.org/wiki/BibTeX for more info. For LaTeX the style -# of the bibliography can be controlled using LATEX_BIB_STYLE. +# The CITE_BIB_FILES tag can be used to specify one or more bib files +# containing the references data. This must be a list of .bib files. The +# .bib extension is automatically appended if omitted. Using this command +# requires the bibtex tool to be installed. See also +# http://en.wikipedia.org/wiki/BibTeX for more info. For LaTeX the style +# of the bibliography can be controlled using LATEX_BIB_STYLE. To use this +# feature you need bibtex and perl available in the search path. Do not use +# file names with spaces, bibtex cannot handle them. -CITE_BIB_FILES = +CITE_BIB_FILES = #--------------------------------------------------------------------------- # configuration options related to warning and progress messages #--------------------------------------------------------------------------- -# The QUIET tag can be used to turn on/off the messages that are generated +# The QUIET tag can be used to turn on/off the messages that are generated # by doxygen. Possible values are YES and NO. If left blank NO is used. QUIET = YES -# The WARNINGS tag can be used to turn on/off the warning messages that are -# generated by doxygen. Possible values are YES and NO. If left blank +# The WARNINGS tag can be used to turn on/off the warning messages that are +# generated by doxygen. Possible values are YES and NO. If left blank # NO is used. WARNINGS = YES -# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings -# for undocumented members. If EXTRACT_ALL is set to YES then this flag will +# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings +# for undocumented members. If EXTRACT_ALL is set to YES then this flag will # automatically be disabled. WARN_IF_UNDOCUMENTED = YES -# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for -# potential errors in the documentation, such as not documenting some -# parameters in a documented function, or documenting parameters that +# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for +# potential errors in the documentation, such as not documenting some +# parameters in a documented function, or documenting parameters that # don't exist or using markup commands wrongly. WARN_IF_DOC_ERROR = YES -# The WARN_NO_PARAMDOC option can be enabled to get warnings for -# functions that are documented, but have no documentation for their parameters -# or return value. If set to NO (the default) doxygen will only warn about -# wrong or incomplete parameter documentation, but not about the absence of +# The WARN_NO_PARAMDOC option can be enabled to get warnings for +# functions that are documented, but have no documentation for their parameters +# or return value. If set to NO (the default) doxygen will only warn about +# wrong or incomplete parameter documentation, but not about the absence of # documentation. WARN_NO_PARAMDOC = NO -# The WARN_FORMAT tag determines the format of the warning messages that -# doxygen can produce. The string should contain the $file, $line, and $text -# tags, which will be replaced by the file and line number from which the -# warning originated and the warning text. Optionally the format may contain -# $version, which will be replaced by the version of the file (if it could +# The WARN_FORMAT tag determines the format of the warning messages that +# doxygen can produce. The string should contain the $file, $line, and $text +# tags, which will be replaced by the file and line number from which the +# warning originated and the warning text. Optionally the format may contain +# $version, which will be replaced by the version of the file (if it could # be obtained via FILE_VERSION_FILTER) WARN_FORMAT = "$file:$line: $text" -# The WARN_LOGFILE tag can be used to specify a file to which warning -# and error messages should be written. If left blank the output is written +# The WARN_LOGFILE tag can be used to specify a file to which warning +# and error messages should be written. If left blank the output is written # to stderr. -WARN_LOGFILE = +WARN_LOGFILE = #--------------------------------------------------------------------------- # configuration options related to the input files #--------------------------------------------------------------------------- -# The INPUT tag can be used to specify the files and/or directories that contain -# documented source files. You may enter file names like "myfile.cpp" or -# directories like "/usr/src/myproject". Separate the files or directories +# The INPUT tag can be used to specify the files and/or directories that contain +# documented source files. You may enter file names like "myfile.cpp" or +# directories like "/usr/src/myproject". Separate the files or directories # with spaces. -INPUT = ../include/ +INPUT = . -# This tag can be used to specify the character encoding of the source files -# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is -# also the default input encoding. Doxygen uses libiconv (or the iconv built -# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for +# This tag can be used to specify the character encoding of the source files +# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is +# also the default input encoding. Doxygen uses libiconv (or the iconv built +# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for # the list of possible encodings. INPUT_ENCODING = UTF-8 -# If the value of the INPUT tag contains directories, you can use the -# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp -# and *.h) to filter out the source-files in the directories. If left -# blank the following patterns are tested: -# *.c *.cc *.cxx *.cpp *.c++ *.d *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh -# *.hxx *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.dox *.py +# If the value of the INPUT tag contains directories, you can use the +# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp +# and *.h) to filter out the source-files in the directories. If left +# blank the following patterns are tested: +# *.c *.cc *.cxx *.cpp *.c++ *.d *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh +# *.hxx *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.dox *.py # *.f90 *.f *.for *.vhd *.vhdl FILE_PATTERNS = *.c \ @@ -689,151 +715,173 @@ FILE_PATTERNS = *.c \ *.vhd \ *.vhdl -# The RECURSIVE tag can be used to turn specify whether or not subdirectories -# should be searched for input files as well. Possible values are YES and NO. +# The RECURSIVE tag can be used to turn specify whether or not subdirectories +# should be searched for input files as well. Possible values are YES and NO. # If left blank NO is used. RECURSIVE = YES -# The EXCLUDE tag can be used to specify files and/or directories that should -# excluded from the INPUT source files. This way you can easily exclude a -# subdirectory from a directory tree whose root is specified with the INPUT tag. -# Note that relative paths are relative to directory from which doxygen is run. +# The EXCLUDE tag can be used to specify files and/or directories that should be +# excluded from the INPUT source files. This way you can easily exclude a +# subdirectory from a directory tree whose root is specified with the INPUT tag. +# Note that relative paths are relative to the directory from which doxygen is +# run. EXCLUDE = osd/nonCopyable.h -# The EXCLUDE_SYMLINKS tag can be used select whether or not files or -# directories that are symbolic links (a Unix file system feature) are excluded +# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or +# directories that are symbolic links (a Unix file system feature) are excluded # from the input. EXCLUDE_SYMLINKS = NO -# If the value of the INPUT tag contains directories, you can use the -# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude -# certain files from those directories. Note that the wildcards are matched -# against the file with absolute path, so to exclude all test directories +# If the value of the INPUT tag contains directories, you can use the +# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude +# certain files from those directories. Note that the wildcards are matched +# against the file with absolute path, so to exclude all test directories # for example use the pattern */test/* -EXCLUDE_PATTERNS = +EXCLUDE_PATTERNS = -# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names -# (namespaces, classes, functions, etc.) that should be excluded from the -# output. The symbol name can be a fully qualified name, a word, or if the -# wildcard * is used, a substring. Examples: ANamespace, AClass, +# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names +# (namespaces, classes, functions, etc.) that should be excluded from the +# output. The symbol name can be a fully qualified name, a word, or if the +# wildcard * is used, a substring. Examples: ANamespace, AClass, # AClass::ANamespace, ANamespace::*Test -EXCLUDE_SYMBOLS = +EXCLUDE_SYMBOLS = -# The EXAMPLE_PATH tag can be used to specify one or more files or -# directories that contain example code fragments that are included (see +# The EXAMPLE_PATH tag can be used to specify one or more files or +# directories that contain example code fragments that are included (see # the \include command). -EXAMPLE_PATH = +EXAMPLE_PATH = -# If the value of the EXAMPLE_PATH tag contains directories, you can use the -# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp -# and *.h) to filter out the source-files in the directories. If left +# If the value of the EXAMPLE_PATH tag contains directories, you can use the +# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp +# and *.h) to filter out the source-files in the directories. If left # blank all files are included. EXAMPLE_PATTERNS = * -# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be -# searched for input files to be used with the \include or \dontinclude -# commands irrespective of the value of the RECURSIVE tag. +# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be +# searched for input files to be used with the \include or \dontinclude +# commands irrespective of the value of the RECURSIVE tag. # Possible values are YES and NO. If left blank NO is used. EXAMPLE_RECURSIVE = NO -# The IMAGE_PATH tag can be used to specify one or more files or -# directories that contain image that are included in the documentation (see +# The IMAGE_PATH tag can be used to specify one or more files or +# directories that contain image that are included in the documentation (see # the \image command). IMAGE_PATH = @CMAKE_CURRENT_SOURCE_DIR@/images -# The INPUT_FILTER tag can be used to specify a program that doxygen should -# invoke to filter for each input file. Doxygen will invoke the filter program -# by executing (via popen()) the command , where -# is the value of the INPUT_FILTER tag, and is the name of an -# input file. Doxygen will then use the output that the filter program writes -# to standard output. If FILTER_PATTERNS is specified, this tag will be -# ignored. +# The INPUT_FILTER tag can be used to specify a program that doxygen should +# invoke to filter for each input file. Doxygen will invoke the filter program +# by executing (via popen()) the command , where +# is the value of the INPUT_FILTER tag, and is the name of an +# input file. Doxygen will then use the output that the filter program writes +# to standard output. +# If FILTER_PATTERNS is specified, this tag will be ignored. +# Note that the filter must not add or remove lines; it is applied before the +# code is scanned, but not when the output code is generated. If lines are added +# or removed, the anchors will not be placed correctly. -INPUT_FILTER = +INPUT_FILTER = -# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern -# basis. Doxygen will compare the file name with each pattern and apply the -# filter if there is a match. The filters are a list of the form: -# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further -# info on how filters are used. If FILTER_PATTERNS is empty or if +# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern +# basis. +# Doxygen will compare the file name with each pattern and apply the +# filter if there is a match. +# The filters are a list of the form: +# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further +# info on how filters are used. If FILTER_PATTERNS is empty or if # non of the patterns match the file name, INPUT_FILTER is applied. -FILTER_PATTERNS = +FILTER_PATTERNS = -# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using -# INPUT_FILTER) will be used to filter the input files when producing source +# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using +# INPUT_FILTER) will be used to filter the input files when producing source # files to browse (i.e. when SOURCE_BROWSER is set to YES). FILTER_SOURCE_FILES = NO -# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file -# pattern. A pattern will override the setting for FILTER_PATTERN (if any) -# and it is also possible to disable source filtering for a specific pattern -# using *.ext= (so without naming a filter). This option only has effect when +# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file +# pattern. A pattern will override the setting for FILTER_PATTERN (if any) +# and it is also possible to disable source filtering for a specific pattern +# using *.ext= (so without naming a filter). This option only has effect when # FILTER_SOURCE_FILES is enabled. -FILTER_SOURCE_PATTERNS = +FILTER_SOURCE_PATTERNS = + +# If the USE_MD_FILE_AS_MAINPAGE tag refers to the name of a markdown file that +# is part of the input, its contents will be placed on the main page +# (index.html). This can be useful if you have a project on for instance GitHub +# and want reuse the introduction page also for the doxygen output. + +USE_MDFILE_AS_MAINPAGE = #--------------------------------------------------------------------------- # configuration options related to source browsing #--------------------------------------------------------------------------- -# If the SOURCE_BROWSER tag is set to YES then a list of source files will -# be generated. Documented entities will be cross-referenced with these sources. -# Note: To get rid of all source code in the generated output, make sure also +# If the SOURCE_BROWSER tag is set to YES then a list of source files will +# be generated. Documented entities will be cross-referenced with these sources. +# Note: To get rid of all source code in the generated output, make sure also # VERBATIM_HEADERS is set to NO. SOURCE_BROWSER = YES -# Setting the INLINE_SOURCES tag to YES will include the body +# Setting the INLINE_SOURCES tag to YES will include the body # of functions and classes directly in the documentation. INLINE_SOURCES = NO -# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct -# doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. +# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct +# doxygen to hide any special comment blocks from generated source code +# fragments. Normal C, C++ and Fortran comments will always remain visible. STRIP_CODE_COMMENTS = YES -# If the REFERENCED_BY_RELATION tag is set to YES -# then for each documented function all documented +# If the REFERENCED_BY_RELATION tag is set to YES +# then for each documented function all documented # functions referencing it will be listed. REFERENCED_BY_RELATION = NO -# If the REFERENCES_RELATION tag is set to YES -# then for each documented function all documented entities +# If the REFERENCES_RELATION tag is set to YES +# then for each documented function all documented entities # called/used by that function will be listed. REFERENCES_RELATION = NO -# If the REFERENCES_LINK_SOURCE tag is set to YES (the default) -# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from -# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will -# link to the source code. Otherwise they will link to the documentation. +# If the REFERENCES_LINK_SOURCE tag is set to YES (the default) +# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from +# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will +# link to the source code. +# Otherwise they will link to the documentation. REFERENCES_LINK_SOURCE = YES -# If the USE_HTAGS tag is set to YES then the references to source code -# will point to the HTML generated by the htags(1) tool instead of doxygen -# built-in source browser. The htags tool is part of GNU's global source -# tagging system (see http://www.gnu.org/software/global/global.html). You +# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the +# source code will show a tooltip with additional information such as prototype, +# brief description and links to the definition and documentation. Since this will +# make the HTML file larger and loading of large files a bit slower, you can opt +# to disable this feature. + +SOURCE_TOOLTIPS = YES + +# If the USE_HTAGS tag is set to YES then the references to source code +# will point to the HTML generated by the htags(1) tool instead of doxygen +# built-in source browser. The htags tool is part of GNU's global source +# tagging system (see http://www.gnu.org/software/global/global.html). You # will need version 4.8.6 or higher. USE_HTAGS = NO -# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen -# will generate a verbatim copy of the header file for each class for +# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen +# will generate a verbatim copy of the header file for each class for # which an include is specified. Set to NO to disable this. VERBATIM_HEADERS = YES @@ -842,163 +890,171 @@ VERBATIM_HEADERS = YES # configuration options related to the alphabetical class index #--------------------------------------------------------------------------- -# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index -# of all compounds will be generated. Enable this if the project +# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index +# of all compounds will be generated. Enable this if the project # contains a lot of classes, structs, unions or interfaces. ALPHABETICAL_INDEX = YES -# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then -# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns +# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then +# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns # in which this list will be split (can be a number in the range [1..20]) COLS_IN_ALPHA_INDEX = 5 -# In case all classes in a project start with a common prefix, all -# classes will be put under the same header in the alphabetical index. -# The IGNORE_PREFIX tag can be used to specify one or more prefixes that +# In case all classes in a project start with a common prefix, all +# classes will be put under the same header in the alphabetical index. +# The IGNORE_PREFIX tag can be used to specify one or more prefixes that # should be ignored while generating the index headers. -IGNORE_PREFIX = +IGNORE_PREFIX = #--------------------------------------------------------------------------- # configuration options related to the HTML output #--------------------------------------------------------------------------- -# If the GENERATE_HTML tag is set to YES (the default) Doxygen will +# If the GENERATE_HTML tag is set to YES (the default) Doxygen will # generate HTML output. GENERATE_HTML = YES -# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. -# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be # put in front of it. If left blank `html' will be used as the default path. -HTML_OUTPUT = html +HTML_OUTPUT = doxy_html -# The HTML_FILE_EXTENSION tag can be used to specify the file extension for -# each generated HTML page (for example: .htm,.php,.asp). If it is left blank +# The HTML_FILE_EXTENSION tag can be used to specify the file extension for +# each generated HTML page (for example: .htm,.php,.asp). If it is left blank # doxygen will generate files with .html extension. HTML_FILE_EXTENSION = .html -# The HTML_HEADER tag can be used to specify a personal HTML header for -# each generated HTML page. If it is left blank doxygen will generate a -# standard header. Note that when using a custom header you are responsible -# for the proper inclusion of any scripts and style sheets that doxygen -# needs, which is dependent on the configuration options used. -# It is adviced to generate a default header using "doxygen -w html -# header.html footer.html stylesheet.css YourConfigFile" and then modify -# that header. Note that the header is subject to change so you typically -# have to redo this when upgrading to a newer version of doxygen or when +# The HTML_HEADER tag can be used to specify a personal HTML header for +# each generated HTML page. If it is left blank doxygen will generate a +# standard header. Note that when using a custom header you are responsible +# for the proper inclusion of any scripts and style sheets that doxygen +# needs, which is dependent on the configuration options used. +# It is advised to generate a default header using "doxygen -w html +# header.html footer.html stylesheet.css YourConfigFile" and then modify +# that header. Note that the header is subject to change so you typically +# have to redo this when upgrading to a newer version of doxygen or when # changing the value of configuration settings such as GENERATE_TREEVIEW! -HTML_HEADER = +HTML_HEADER = -# The HTML_FOOTER tag can be used to specify a personal HTML footer for -# each generated HTML page. If it is left blank doxygen will generate a +# The HTML_FOOTER tag can be used to specify a personal HTML footer for +# each generated HTML page. If it is left blank doxygen will generate a # standard footer. -HTML_FOOTER = +HTML_FOOTER = -# If the HTML_TIMESTAMP tag is set to YES then the generated HTML -# documentation will contain the timesstamp. +# The HTML_STYLESHEET tag can be used to specify a user-defined cascading +# style sheet that is used by each HTML page. It can be used to +# fine-tune the look of the HTML output. If left blank doxygen will +# generate a default style sheet. Note that it is recommended to use +# HTML_EXTRA_STYLESHEET instead of this one, as it is more robust and this +# tag will in the future become obsolete. -HTML_TIMESTAMP = YES +HTML_STYLESHEET = -# The HTML_STYLESHEET tag can be used to specify a user-defined cascading -# style sheet that is used by each HTML page. It can be used to -# fine-tune the look of the HTML output. If the tag is left blank doxygen -# will generate a default style sheet. Note that doxygen will try to copy -# the style sheet file to the HTML output directory, so don't put your own -# stylesheet in the HTML output directory as well, or it will be erased! +# The HTML_EXTRA_STYLESHEET tag can be used to specify an additional +# user-defined cascading style sheet that is included after the standard +# style sheets created by doxygen. Using this option one can overrule +# certain style aspects. This is preferred over using HTML_STYLESHEET +# since it does not replace the standard style sheet and is therefor more +# robust against future updates. Doxygen will copy the style sheet file to +# the output directory. -HTML_STYLESHEET = +HTML_EXTRA_STYLESHEET = -# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or -# other source files which should be copied to the HTML output directory. Note -# that these files will be copied to the base HTML output directory. Use the -# $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these -# files. In the HTML_STYLESHEET file, use the file name only. Also note that +# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or +# other source files which should be copied to the HTML output directory. Note +# that these files will be copied to the base HTML output directory. Use the +# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these +# files. In the HTML_STYLESHEET file, use the file name only. Also note that # the files will be copied as-is; there are no commands or markers available. -HTML_EXTRA_FILES = +HTML_EXTRA_FILES = -# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. -# Doxygen will adjust the colors in the stylesheet and background images -# according to this color. Hue is specified as an angle on a colorwheel, -# see http://en.wikipedia.org/wiki/Hue for more information. -# For instance the value 0 represents red, 60 is yellow, 120 is green, -# 180 is cyan, 240 is blue, 300 purple, and 360 is red again. +# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. +# Doxygen will adjust the colors in the style sheet and background images +# according to this color. Hue is specified as an angle on a colorwheel, +# see http://en.wikipedia.org/wiki/Hue for more information. +# For instance the value 0 represents red, 60 is yellow, 120 is green, +# 180 is cyan, 240 is blue, 300 purple, and 360 is red again. # The allowed range is 0 to 359. HTML_COLORSTYLE_HUE = 220 -# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of -# the colors in the HTML output. For a value of 0 the output will use +# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of +# the colors in the HTML output. For a value of 0 the output will use # grayscales only. A value of 255 will produce the most vivid colors. HTML_COLORSTYLE_SAT = 100 -# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to -# the luminance component of the colors in the HTML output. Values below -# 100 gradually make the output lighter, whereas values above 100 make -# the output darker. The value divided by 100 is the actual gamma applied, -# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2, +# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to +# the luminance component of the colors in the HTML output. Values below +# 100 gradually make the output lighter, whereas values above 100 make +# the output darker. The value divided by 100 is the actual gamma applied, +# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2, # and 100 does not change the gamma. HTML_COLORSTYLE_GAMMA = 80 -# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML -# page will contain the date and time when the page was generated. Setting +# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML +# page will contain the date and time when the page was generated. Setting # this to NO can help when comparing the output of multiple runs. HTML_TIMESTAMP = YES -# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, -# files or namespaces will be aligned in HTML using tables. If set to -# NO a bullet list will be used. - -HTML_ALIGN_MEMBERS = YES - -# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML -# documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). +# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML +# documentation will contain sections that can be hidden and shown after the +# page has loaded. HTML_DYNAMIC_SECTIONS = NO -# If the GENERATE_DOCSET tag is set to YES, additional index files -# will be generated that can be used as input for Apple's Xcode 3 -# integrated development environment, introduced with OSX 10.5 (Leopard). -# To create a documentation set, doxygen will generate a Makefile in the -# HTML output directory. Running make will produce the docset in that -# directory and running "make install" will install the docset in -# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find -# it at startup. -# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html +# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of +# entries shown in the various tree structured indices initially; the user +# can expand and collapse entries dynamically later on. Doxygen will expand +# the tree to such a level that at most the specified number of entries are +# visible (unless a fully collapsed tree already exceeds this amount). +# So setting the number of entries 1 will produce a full collapsed tree by +# default. 0 is a special value representing an infinite number of entries +# and will result in a full expanded tree by default. + +HTML_INDEX_NUM_ENTRIES = 100 + +# If the GENERATE_DOCSET tag is set to YES, additional index files +# will be generated that can be used as input for Apple's Xcode 3 +# integrated development environment, introduced with OSX 10.5 (Leopard). +# To create a documentation set, doxygen will generate a Makefile in the +# HTML output directory. Running make will produce the docset in that +# directory and running "make install" will install the docset in +# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find +# it at startup. +# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html # for more information. GENERATE_DOCSET = NO -# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the -# feed. A documentation feed provides an umbrella under which multiple -# documentation sets from a single provider (such as a company or product suite) +# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the +# feed. A documentation feed provides an umbrella under which multiple +# documentation sets from a single provider (such as a company or product suite) # can be grouped. DOCSET_FEEDNAME = "Doxygen generated docs" -# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that -# should uniquely identify the documentation set bundle. This should be a -# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen +# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that +# should uniquely identify the documentation set bundle. This should be a +# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen # will append .docset to the name. DOCSET_BUNDLE_ID = org.doxygen.Project -# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify -# the documentation publisher. This should be a reverse domain-name style -# string, e.g. com.mycompany.MyDocSet.documentation. +# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely +# identify the documentation publisher. This should be a reverse domain-name +# style string, e.g. com.mycompany.MyDocSet.documentation. DOCSET_PUBLISHER_ID = org.doxygen.Publisher @@ -1006,315 +1062,374 @@ DOCSET_PUBLISHER_ID = org.doxygen.Publisher DOCSET_PUBLISHER_NAME = Publisher -# If the GENERATE_HTMLHELP tag is set to YES, additional index files -# will be generated that can be used as input for tools like the -# Microsoft HTML help workshop to generate a compiled HTML help file (.chm) +# If the GENERATE_HTMLHELP tag is set to YES, additional index files +# will be generated that can be used as input for tools like the +# Microsoft HTML help workshop to generate a compiled HTML help file (.chm) # of the generated HTML documentation. GENERATE_HTMLHELP = NO -# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can -# be used to specify the file name of the resulting .chm file. You -# can add a path in front of the file if the result should not be +# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can +# be used to specify the file name of the resulting .chm file. You +# can add a path in front of the file if the result should not be # written to the html output directory. -CHM_FILE = +CHM_FILE = -# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can -# be used to specify the location (absolute path including file name) of -# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run +# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can +# be used to specify the location (absolute path including file name) of +# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run # the HTML help compiler on the generated index.hhp. -HHC_LOCATION = +HHC_LOCATION = -# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag -# controls if a separate .chi index file is generated (YES) or that +# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag +# controls if a separate .chi index file is generated (YES) or that # it should be included in the master .chm file (NO). GENERATE_CHI = NO -# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING -# is used to encode HtmlHelp index (hhk), content (hhc) and project file +# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING +# is used to encode HtmlHelp index (hhk), content (hhc) and project file # content. -CHM_INDEX_ENCODING = +CHM_INDEX_ENCODING = -# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag -# controls whether a binary table of contents is generated (YES) or a +# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag +# controls whether a binary table of contents is generated (YES) or a # normal table of contents (NO) in the .chm file. BINARY_TOC = NO -# The TOC_EXPAND flag can be set to YES to add extra items for group members +# The TOC_EXPAND flag can be set to YES to add extra items for group members # to the contents of the HTML help documentation and to the tree view. TOC_EXPAND = NO -# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and -# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated -# that can be used as input for Qt's qhelpgenerator to generate a +# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and +# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated +# that can be used as input for Qt's qhelpgenerator to generate a # Qt Compressed Help (.qch) of the generated HTML documentation. GENERATE_QHP = NO -# If the QHG_LOCATION tag is specified, the QCH_FILE tag can -# be used to specify the file name of the resulting .qch file. +# If the QHG_LOCATION tag is specified, the QCH_FILE tag can +# be used to specify the file name of the resulting .qch file. # The path specified is relative to the HTML output folder. -QCH_FILE = +QCH_FILE = -# The QHP_NAMESPACE tag specifies the namespace to use when generating -# Qt Help Project output. For more information please see +# The QHP_NAMESPACE tag specifies the namespace to use when generating +# Qt Help Project output. For more information please see # http://doc.trolltech.com/qthelpproject.html#namespace QHP_NAMESPACE = org.doxygen.Project -# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating -# Qt Help Project output. For more information please see +# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating +# Qt Help Project output. For more information please see # http://doc.trolltech.com/qthelpproject.html#virtual-folders QHP_VIRTUAL_FOLDER = doc -# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to -# add. For more information please see +# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to +# add. For more information please see # http://doc.trolltech.com/qthelpproject.html#custom-filters -QHP_CUST_FILTER_NAME = +QHP_CUST_FILTER_NAME = -# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the -# custom filter to add. For more information please see -# +# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the +# custom filter to add. For more information please see +# # Qt Help Project / Custom Filters. -QHP_CUST_FILTER_ATTRS = +QHP_CUST_FILTER_ATTRS = -# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this -# project's -# filter section matches. -# +# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this +# project's +# filter section matches. +# # Qt Help Project / Filter Attributes. -QHP_SECT_FILTER_ATTRS = +QHP_SECT_FILTER_ATTRS = -# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can -# be used to specify the location of Qt's qhelpgenerator. -# If non-empty doxygen will try to run qhelpgenerator on the generated +# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can +# be used to specify the location of Qt's qhelpgenerator. +# If non-empty doxygen will try to run qhelpgenerator on the generated # .qhp file. -QHG_LOCATION = +QHG_LOCATION = -# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files -# will be generated, which together with the HTML files, form an Eclipse help -# plugin. To install this plugin and make it available under the help contents -# menu in Eclipse, the contents of the directory containing the HTML and XML -# files needs to be copied into the plugins directory of eclipse. The name of -# the directory within the plugins directory should be the same as -# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before +# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files +# will be generated, which together with the HTML files, form an Eclipse help +# plugin. To install this plugin and make it available under the help contents +# menu in Eclipse, the contents of the directory containing the HTML and XML +# files needs to be copied into the plugins directory of eclipse. The name of +# the directory within the plugins directory should be the same as +# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before # the help appears. GENERATE_ECLIPSEHELP = NO -# A unique identifier for the eclipse help plugin. When installing the plugin -# the directory name containing the HTML and XML files should also have +# A unique identifier for the eclipse help plugin. When installing the plugin +# the directory name containing the HTML and XML files should also have # this name. ECLIPSE_DOC_ID = org.doxygen.Project -# The DISABLE_INDEX tag can be used to turn on/off the condensed index at -# top of each HTML page. The value NO (the default) enables the index and -# the value YES disables it. +# The DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) +# at top of each HTML page. The value NO (the default) enables the index and +# the value YES disables it. Since the tabs have the same information as the +# navigation tree you can set this option to NO if you already set +# GENERATE_TREEVIEW to YES. DISABLE_INDEX = NO -# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values -# (range [0,1..20]) that doxygen will group on one line in the generated HTML -# documentation. Note that a value of 0 will completely suppress the enum +# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index +# structure should be generated to display hierarchical information. +# If the tag value is set to YES, a side panel will be generated +# containing a tree-like index structure (just like the one that +# is generated for HTML Help). For this to work a browser that supports +# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser). +# Windows users are probably better off using the HTML help feature. +# Since the tree basically has the same information as the tab index you +# could consider to set DISABLE_INDEX to NO when enabling this option. + +GENERATE_TREEVIEW = YES + +# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values +# (range [0,1..20]) that doxygen will group on one line in the generated HTML +# documentation. Note that a value of 0 will completely suppress the enum # values from appearing in the overview section. ENUM_VALUES_PER_LINE = 4 -# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index -# structure should be generated to display hierarchical information. -# If the tag value is set to YES, a side panel will be generated -# containing a tree-like index structure (just like the one that -# is generated for HTML Help). For this to work a browser that supports -# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser). -# Windows users are probably better off using the HTML help feature. - -GENERATE_TREEVIEW = YES - -# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories, -# and Class Hierarchy pages using a tree view instead of an ordered list. - -USE_INLINE_TREES = YES - -# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be -# used to set the initial width (in pixels) of the frame in which the tree +# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be +# used to set the initial width (in pixels) of the frame in which the tree # is shown. TREEVIEW_WIDTH = 250 -# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open +# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open # links to external symbols imported via tag files in a separate window. EXT_LINKS_IN_WINDOW = NO -# Use this tag to change the font size of Latex formulas included -# as images in the HTML documentation. The default is 10. Note that -# when you change the font size after a successful doxygen run you need -# to manually remove any form_*.png images from the HTML output directory +# Use this tag to change the font size of Latex formulas included +# as images in the HTML documentation. The default is 10. Note that +# when you change the font size after a successful doxygen run you need +# to manually remove any form_*.png images from the HTML output directory # to force them to be regenerated. FORMULA_FONTSIZE = 10 -# Use the FORMULA_TRANPARENT tag to determine whether or not the images -# generated for formulas are transparent PNGs. Transparent PNGs are -# not supported properly for IE 6.0, but are supported on all modern browsers. -# Note that when changing this option you need to delete any form_*.png files +# Use the FORMULA_TRANPARENT tag to determine whether or not the images +# generated for formulas are transparent PNGs. Transparent PNGs are +# not supported properly for IE 6.0, but are supported on all modern browsers. +# Note that when changing this option you need to delete any form_*.png files # in the HTML output before the changes have effect. FORMULA_TRANSPARENT = YES -# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax -# (see http://www.mathjax.org) which uses client side Javascript for the -# rendering instead of using prerendered bitmaps. Use this if you do not -# have LaTeX installed or if you want to formulas look prettier in the HTML -# output. When enabled you also need to install MathJax separately and +# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax +# (see http://www.mathjax.org) which uses client side Javascript for the +# rendering instead of using prerendered bitmaps. Use this if you do not +# have LaTeX installed or if you want to formulas look prettier in the HTML +# output. When enabled you may also need to install MathJax separately and # configure the path to it using the MATHJAX_RELPATH option. USE_MATHJAX = NO -# When MathJax is enabled you need to specify the location relative to the -# HTML output directory using the MATHJAX_RELPATH option. The destination -# directory should contain the MathJax.js script. For instance, if the mathjax -# directory is located at the same level as the HTML output directory, then -# MATHJAX_RELPATH should be ../mathjax. The default value points to the -# mathjax.org site, so you can quickly see the result without installing -# MathJax, but it is strongly recommended to install a local copy of MathJax -# before deployment. +# When MathJax is enabled you can set the default output format to be used for +# the MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and +# SVG. The default value is HTML-CSS, which is slower, but has the best +# compatibility. + +MATHJAX_FORMAT = HTML-CSS + +# When MathJax is enabled you need to specify the location relative to the +# HTML output directory using the MATHJAX_RELPATH option. The destination +# directory should contain the MathJax.js script. For instance, if the mathjax +# directory is located at the same level as the HTML output directory, then +# MATHJAX_RELPATH should be ../mathjax. The default value points to +# the MathJax Content Delivery Network so you can quickly see the result without +# installing MathJax. +# However, it is strongly recommended to install a local +# copy of MathJax from http://www.mathjax.org before deployment. MATHJAX_RELPATH = http://www.mathjax.org/mathjax -# The MATHJAX_EXTENSIONS tag can be used to specify one or MathJax extension +# The MATHJAX_EXTENSIONS tag can be used to specify one or MathJax extension # names that should be enabled during MathJax rendering. -MATHJAX_EXTENSIONS = +MATHJAX_EXTENSIONS = -# When the SEARCHENGINE tag is enabled doxygen will generate a search box -# for the HTML output. The underlying search engine uses javascript -# and DHTML and should work on any modern browser. Note that when using -# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets -# (GENERATE_DOCSET) there is already a search function so this one should -# typically be disabled. For large projects the javascript based search engine +# The MATHJAX_CODEFILE tag can be used to specify a file with javascript +# pieces of code that will be used on startup of the MathJax code. + +MATHJAX_CODEFILE = + +# When the SEARCHENGINE tag is enabled doxygen will generate a search box +# for the HTML output. The underlying search engine uses javascript +# and DHTML and should work on any modern browser. Note that when using +# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets +# (GENERATE_DOCSET) there is already a search function so this one should +# typically be disabled. For large projects the javascript based search engine # can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution. SEARCHENGINE = YES -# When the SERVER_BASED_SEARCH tag is enabled the search engine will be -# implemented using a PHP enabled web server instead of at the web client -# using Javascript. Doxygen will generate the search PHP script and index -# file to put on the web server. The advantage of the server -# based approach is that it scales better to large projects and allows -# full text search. The disadvantages are that it is more difficult to setup -# and does not have live searching capabilities. +# When the SERVER_BASED_SEARCH tag is enabled the search engine will be +# implemented using a web server instead of a web client using Javascript. +# There are two flavours of web server based search depending on the +# EXTERNAL_SEARCH setting. When disabled, doxygen will generate a PHP script for +# searching and an index file used by the script. When EXTERNAL_SEARCH is +# enabled the indexing and searching needs to be provided by external tools. +# See the manual for details. SERVER_BASED_SEARCH = NO +# When EXTERNAL_SEARCH is enabled doxygen will no longer generate the PHP +# script for searching. Instead the search results are written to an XML file +# which needs to be processed by an external indexer. Doxygen will invoke an +# external search engine pointed to by the SEARCHENGINE_URL option to obtain +# the search results. Doxygen ships with an example indexer (doxyindexer) and +# search engine (doxysearch.cgi) which are based on the open source search +# engine library Xapian. See the manual for configuration details. + +EXTERNAL_SEARCH = NO + +# The SEARCHENGINE_URL should point to a search engine hosted by a web server +# which will returned the search results when EXTERNAL_SEARCH is enabled. +# Doxygen ships with an example search engine (doxysearch) which is based on +# the open source search engine library Xapian. See the manual for configuration +# details. + +SEARCHENGINE_URL = + +# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed +# search data is written to a file for indexing by an external tool. With the +# SEARCHDATA_FILE tag the name of this file can be specified. + +SEARCHDATA_FILE = searchdata.xml + +# When SERVER_BASED_SEARCH AND EXTERNAL_SEARCH are both enabled the +# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is +# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple +# projects and redirect the results back to the right project. + +EXTERNAL_SEARCH_ID = + +# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen +# projects other than the one defined by this configuration file, but that are +# all added to the same external search index. Each project needs to have a +# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id +# of to a relative location where the documentation can be found. +# The format is: EXTRA_SEARCH_MAPPINGS = id1=loc1 id2=loc2 ... + +EXTRA_SEARCH_MAPPINGS = + #--------------------------------------------------------------------------- # configuration options related to the LaTeX output #--------------------------------------------------------------------------- -# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will +# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will # generate Latex output. GENERATE_LATEX = NO -# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. -# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be # put in front of it. If left blank `latex' will be used as the default path. LATEX_OUTPUT = latex -# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be -# invoked. If left blank `latex' will be used as the default command name. -# Note that when enabling USE_PDFLATEX this option is only used for -# generating bitmaps for formulas in the HTML output, but not in the +# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be +# invoked. If left blank `latex' will be used as the default command name. +# Note that when enabling USE_PDFLATEX this option is only used for +# generating bitmaps for formulas in the HTML output, but not in the # Makefile that is written to the output directory. LATEX_CMD_NAME = latex -# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to -# generate index for LaTeX. If left blank `makeindex' will be used as the +# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to +# generate index for LaTeX. If left blank `makeindex' will be used as the # default command name. MAKEINDEX_CMD_NAME = makeindex -# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact -# LaTeX documents. This may be useful for small projects and may help to +# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact +# LaTeX documents. This may be useful for small projects and may help to # save some trees in general. COMPACT_LATEX = NO -# The PAPER_TYPE tag can be used to set the paper type that is used -# by the printer. Possible values are: a4, letter, legal and -# executive. If left blank a4wide will be used. +# The PAPER_TYPE tag can be used to set the paper type that is used +# by the printer. Possible values are: a4, letter, legal and +# executive. If left blank a4 will be used. PAPER_TYPE = a4 -# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX +# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX # packages that should be included in the LaTeX output. -EXTRA_PACKAGES = +EXTRA_PACKAGES = -# The LATEX_HEADER tag can be used to specify a personal LaTeX header for -# the generated latex document. The header should contain everything until -# the first chapter. If it is left blank doxygen will generate a +# The LATEX_HEADER tag can be used to specify a personal LaTeX header for +# the generated latex document. The header should contain everything until +# the first chapter. If it is left blank doxygen will generate a # standard header. Notice: only use this tag if you know what you are doing! -LATEX_HEADER = +LATEX_HEADER = -# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for -# the generated latex document. The footer should contain everything after -# the last chapter. If it is left blank doxygen will generate a +# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for +# the generated latex document. The footer should contain everything after +# the last chapter. If it is left blank doxygen will generate a # standard footer. Notice: only use this tag if you know what you are doing! -LATEX_FOOTER = +LATEX_FOOTER = -# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated -# is prepared for conversion to pdf (using ps2pdf). The pdf file will -# contain links (just like the HTML output) instead of page references +# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images +# or other source files which should be copied to the LaTeX output directory. +# Note that the files will be copied as-is; there are no commands or markers +# available. + +LATEX_EXTRA_FILES = + +# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated +# is prepared for conversion to pdf (using ps2pdf). The pdf file will +# contain links (just like the HTML output) instead of page references # This makes the output suitable for online browsing using a pdf viewer. PDF_HYPERLINKS = YES -# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of -# plain latex in the generated Makefile. Set this option to YES to get a +# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of +# plain latex in the generated Makefile. Set this option to YES to get a # higher quality PDF documentation. USE_PDFLATEX = YES -# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode. -# command to the generated LaTeX files. This will instruct LaTeX to keep -# running if errors occur, instead of asking the user for help. +# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode. +# command to the generated LaTeX files. This will instruct LaTeX to keep +# running if errors occur, instead of asking the user for help. # This option is also used when generating formulas in HTML. LATEX_BATCHMODE = NO -# If LATEX_HIDE_INDICES is set to YES then doxygen will not -# include the index chapters (such as File Index, Compound Index, etc.) +# If LATEX_HIDE_INDICES is set to YES then doxygen will not +# include the index chapters (such as File Index, Compound Index, etc.) # in the output. LATEX_HIDE_INDICES = NO -# If LATEX_SOURCE_CODE is set to YES then doxygen will include -# source code with syntax highlighting in the LaTeX output. -# Note that which sources are shown also depends on other settings +# If LATEX_SOURCE_CODE is set to YES then doxygen will include +# source code with syntax highlighting in the LaTeX output. +# Note that which sources are shown also depends on other settings # such as SOURCE_BROWSER. LATEX_SOURCE_CODE = NO -# The LATEX_BIB_STYLE tag can be used to specify the style to use for the -# bibliography, e.g. plainnat, or ieeetr. The default style is "plain". See +# The LATEX_BIB_STYLE tag can be used to specify the style to use for the +# bibliography, e.g. plainnat, or ieeetr. The default style is "plain". See # http://en.wikipedia.org/wiki/BibTeX for more info. LATEX_BIB_STYLE = plain @@ -1323,68 +1438,68 @@ LATEX_BIB_STYLE = plain # configuration options related to the RTF output #--------------------------------------------------------------------------- -# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output -# The RTF output is optimized for Word 97 and may not look very pretty with +# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output +# The RTF output is optimized for Word 97 and may not look very pretty with # other RTF readers or editors. GENERATE_RTF = NO -# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. -# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be # put in front of it. If left blank `rtf' will be used as the default path. RTF_OUTPUT = rtf -# If the COMPACT_RTF tag is set to YES Doxygen generates more compact -# RTF documents. This may be useful for small projects and may help to +# If the COMPACT_RTF tag is set to YES Doxygen generates more compact +# RTF documents. This may be useful for small projects and may help to # save some trees in general. COMPACT_RTF = NO -# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated -# will contain hyperlink fields. The RTF file will -# contain links (just like the HTML output) instead of page references. -# This makes the output suitable for online browsing using WORD or other -# programs which support those fields. +# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated +# will contain hyperlink fields. The RTF file will +# contain links (just like the HTML output) instead of page references. +# This makes the output suitable for online browsing using WORD or other +# programs which support those fields. # Note: wordpad (write) and others do not support links. RTF_HYPERLINKS = NO -# Load stylesheet definitions from file. Syntax is similar to doxygen's -# config file, i.e. a series of assignments. You only have to provide +# Load style sheet definitions from file. Syntax is similar to doxygen's +# config file, i.e. a series of assignments. You only have to provide # replacements, missing definitions are set to their default value. -RTF_STYLESHEET_FILE = +RTF_STYLESHEET_FILE = -# Set optional variables used in the generation of an rtf document. +# Set optional variables used in the generation of an rtf document. # Syntax is similar to doxygen's config file. -RTF_EXTENSIONS_FILE = +RTF_EXTENSIONS_FILE = #--------------------------------------------------------------------------- # configuration options related to the man page output #--------------------------------------------------------------------------- -# If the GENERATE_MAN tag is set to YES (the default) Doxygen will +# If the GENERATE_MAN tag is set to YES (the default) Doxygen will # generate man pages GENERATE_MAN = NO -# The MAN_OUTPUT tag is used to specify where the man pages will be put. -# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# The MAN_OUTPUT tag is used to specify where the man pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be # put in front of it. If left blank `man' will be used as the default path. MAN_OUTPUT = man -# The MAN_EXTENSION tag determines the extension that is added to +# The MAN_EXTENSION tag determines the extension that is added to # the generated man pages (default is the subroutine's section .3) MAN_EXTENSION = .3 -# If the MAN_LINKS tag is set to YES and Doxygen generates man output, -# then it will generate one additional man file for each entity -# documented in the real man page(s). These additional files -# only source the real man page, but without them the man command +# If the MAN_LINKS tag is set to YES and Doxygen generates man output, +# then it will generate one additional man file for each entity +# documented in the real man page(s). These additional files +# only source the real man page, but without them the man command # would be unable to find the correct page. The default is NO. MAN_LINKS = NO @@ -1393,45 +1508,60 @@ MAN_LINKS = NO # configuration options related to the XML output #--------------------------------------------------------------------------- -# If the GENERATE_XML tag is set to YES Doxygen will -# generate an XML file that captures the structure of +# If the GENERATE_XML tag is set to YES Doxygen will +# generate an XML file that captures the structure of # the code including all documentation. GENERATE_XML = NO -# The XML_OUTPUT tag is used to specify where the XML pages will be put. -# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# The XML_OUTPUT tag is used to specify where the XML pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be # put in front of it. If left blank `xml' will be used as the default path. XML_OUTPUT = xml -# The XML_SCHEMA tag can be used to specify an XML schema, -# which can be used by a validating XML parser to check the +# The XML_SCHEMA tag can be used to specify an XML schema, +# which can be used by a validating XML parser to check the # syntax of the XML files. -XML_SCHEMA = +XML_SCHEMA = -# The XML_DTD tag can be used to specify an XML DTD, -# which can be used by a validating XML parser to check the +# The XML_DTD tag can be used to specify an XML DTD, +# which can be used by a validating XML parser to check the # syntax of the XML files. -XML_DTD = +XML_DTD = -# If the XML_PROGRAMLISTING tag is set to YES Doxygen will -# dump the program listings (including syntax highlighting -# and cross-referencing information) to the XML output. Note that +# If the XML_PROGRAMLISTING tag is set to YES Doxygen will +# dump the program listings (including syntax highlighting +# and cross-referencing information) to the XML output. Note that # enabling this will significantly increase the size of the XML output. XML_PROGRAMLISTING = YES +#--------------------------------------------------------------------------- +# configuration options related to the DOCBOOK output +#--------------------------------------------------------------------------- + +# If the GENERATE_DOCBOOK tag is set to YES Doxygen will generate DOCBOOK files +# that can be used to generate PDF. + +GENERATE_DOCBOOK = NO + +# The DOCBOOK_OUTPUT tag is used to specify where the DOCBOOK pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in +# front of it. If left blank docbook will be used as the default path. + +DOCBOOK_OUTPUT = docbook + #--------------------------------------------------------------------------- # configuration options for the AutoGen Definitions output #--------------------------------------------------------------------------- -# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will -# generate an AutoGen Definitions (see autogen.sf.net) file -# that captures the structure of the code including all -# documentation. Note that this feature is still experimental +# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will +# generate an AutoGen Definitions (see autogen.sf.net) file +# that captures the structure of the code including all +# documentation. Note that this feature is still experimental # and incomplete at the moment. GENERATE_AUTOGEN_DEF = NO @@ -1440,97 +1570,99 @@ GENERATE_AUTOGEN_DEF = NO # configuration options related to the Perl module output #--------------------------------------------------------------------------- -# If the GENERATE_PERLMOD tag is set to YES Doxygen will -# generate a Perl module file that captures the structure of -# the code including all documentation. Note that this -# feature is still experimental and incomplete at the +# If the GENERATE_PERLMOD tag is set to YES Doxygen will +# generate a Perl module file that captures the structure of +# the code including all documentation. Note that this +# feature is still experimental and incomplete at the # moment. GENERATE_PERLMOD = NO -# If the PERLMOD_LATEX tag is set to YES Doxygen will generate -# the necessary Makefile rules, Perl scripts and LaTeX code to be able +# If the PERLMOD_LATEX tag is set to YES Doxygen will generate +# the necessary Makefile rules, Perl scripts and LaTeX code to be able # to generate PDF and DVI output from the Perl module output. PERLMOD_LATEX = NO -# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be -# nicely formatted so it can be parsed by a human reader. This is useful -# if you want to understand what is going on. On the other hand, if this -# tag is set to NO the size of the Perl module output will be much smaller +# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be +# nicely formatted so it can be parsed by a human reader. +# This is useful +# if you want to understand what is going on. +# On the other hand, if this +# tag is set to NO the size of the Perl module output will be much smaller # and Perl will parse it just the same. PERLMOD_PRETTY = YES -# The names of the make variables in the generated doxyrules.make file -# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. -# This is useful so different doxyrules.make files included by the same +# The names of the make variables in the generated doxyrules.make file +# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. +# This is useful so different doxyrules.make files included by the same # Makefile don't overwrite each other's variables. -PERLMOD_MAKEVAR_PREFIX = +PERLMOD_MAKEVAR_PREFIX = #--------------------------------------------------------------------------- # Configuration options related to the preprocessor #--------------------------------------------------------------------------- -# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will -# evaluate all C-preprocessor directives found in the sources and include +# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will +# evaluate all C-preprocessor directives found in the sources and include # files. ENABLE_PREPROCESSING = YES -# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro -# names in the source code. If set to NO (the default) only conditional -# compilation will be performed. Macro expansion can be done in a controlled +# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro +# names in the source code. If set to NO (the default) only conditional +# compilation will be performed. Macro expansion can be done in a controlled # way by setting EXPAND_ONLY_PREDEF to YES. MACRO_EXPANSION = NO -# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES -# then the macro expansion is limited to the macros specified with the +# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES +# then the macro expansion is limited to the macros specified with the # PREDEFINED and EXPAND_AS_DEFINED tags. EXPAND_ONLY_PREDEF = NO -# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files +# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files # pointed to by INCLUDE_PATH will be searched when a #include is found. SEARCH_INCLUDES = YES -# The INCLUDE_PATH tag can be used to specify one or more directories that -# contain include files that are not input files but should be processed by +# The INCLUDE_PATH tag can be used to specify one or more directories that +# contain include files that are not input files but should be processed by # the preprocessor. -INCLUDE_PATH = +INCLUDE_PATH = -# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard -# patterns (like *.h and *.hpp) to filter out the header-files in the -# directories. If left blank, the patterns specified with FILE_PATTERNS will +# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard +# patterns (like *.h and *.hpp) to filter out the header-files in the +# directories. If left blank, the patterns specified with FILE_PATTERNS will # be used. -INCLUDE_FILE_PATTERNS = +INCLUDE_FILE_PATTERNS = -# The PREDEFINED tag can be used to specify one or more macro names that -# are defined before the preprocessor is started (similar to the -D option of -# gcc). The argument of the tag is a list of macros of the form: name -# or name=definition (no spaces). If the definition and the = are -# omitted =1 is assumed. To prevent a macro definition from being -# undefined via #undef or recursively expanded use the := operator +# The PREDEFINED tag can be used to specify one or more macro names that +# are defined before the preprocessor is started (similar to the -D option of +# gcc). The argument of the tag is a list of macros of the form: name +# or name=definition (no spaces). If the definition and the = are +# omitted =1 is assumed. To prevent a macro definition from being +# undefined via #undef or recursively expanded use the := operator # instead of the = operator. -PREDEFINED = +PREDEFINED = -# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then -# this tag can be used to specify a list of macro names that should be expanded. -# The macro definition that is found in the sources will be used. -# Use the PREDEFINED tag if you want to use a different macro definition that +# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then +# this tag can be used to specify a list of macro names that should be expanded. +# The macro definition that is found in the sources will be used. +# Use the PREDEFINED tag if you want to use a different macro definition that # overrules the definition found in the source code. -EXPAND_AS_DEFINED = +EXPAND_AS_DEFINED = -# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then -# doxygen's preprocessor will remove all references to function-like macros -# that are alone on a line, have an all uppercase name, and do not end with a +# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then +# doxygen's preprocessor will remove all references to function-like macros +# that are alone on a line, have an all uppercase name, and do not end with a # semicolon, because these will confuse the parser if not removed. SKIP_FUNCTION_MACROS = YES @@ -1539,41 +1671,45 @@ SKIP_FUNCTION_MACROS = YES # Configuration::additions related to external references #--------------------------------------------------------------------------- -# The TAGFILES option can be used to specify one or more tagfiles. -# Optionally an initial location of the external documentation -# can be added for each tagfile. The format of a tag file without -# this location is as follows: -# TAGFILES = file1 file2 ... -# Adding location for the tag files is done as follows: -# TAGFILES = file1=loc1 "file2 = loc2" ... -# where "loc1" and "loc2" can be relative or absolute paths or -# URLs. If a location is present for each tag, the installdox tool -# does not have to be run to correct the links. -# Note that each tag file must have a unique name -# (where the name does NOT include the path) -# If a tag file is not located in the directory in which doxygen -# is run, you must also specify the path to the tagfile here. +# The TAGFILES option can be used to specify one or more tagfiles. For each +# tag file the location of the external documentation should be added. The +# format of a tag file without this location is as follows: +# +# TAGFILES = file1 file2 ... +# Adding location for the tag files is done as follows: +# +# TAGFILES = file1=loc1 "file2 = loc2" ... +# where "loc1" and "loc2" can be relative or absolute paths +# or URLs. Note that each tag file must have a unique name (where the name does +# NOT include the path). If a tag file is not located in the directory in which +# doxygen is run, you must also specify the path to the tagfile here. -TAGFILES = +TAGFILES = -# When a file name is specified after GENERATE_TAGFILE, doxygen will create +# When a file name is specified after GENERATE_TAGFILE, doxygen will create # a tag file that is based on the input files it reads. -GENERATE_TAGFILE = +GENERATE_TAGFILE = -# If the ALLEXTERNALS tag is set to YES all external classes will be listed -# in the class index. If set to NO only the inherited external classes +# If the ALLEXTERNALS tag is set to YES all external classes will be listed +# in the class index. If set to NO only the inherited external classes # will be listed. ALLEXTERNALS = NO -# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed -# in the modules index. If set to NO, only the current project's groups will +# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed +# in the modules index. If set to NO, only the current project's groups will # be listed. EXTERNAL_GROUPS = YES -# The PERL_PATH should be the absolute path and name of the perl script +# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed +# in the related pages index. If set to NO, only the current project's +# pages will be listed. + +EXTERNAL_PAGES = YES + +# The PERL_PATH should be the absolute path and name of the perl script # interpreter (i.e. the result of `which perl'). PERL_PATH = /usr/bin/perl @@ -1582,213 +1718,222 @@ PERL_PATH = /usr/bin/perl # Configuration options related to the dot tool #--------------------------------------------------------------------------- -# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will -# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base -# or super classes. Setting the tag to NO turns the diagrams off. Note that -# this option also works with HAVE_DOT disabled, but it is recommended to +# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will +# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base +# or super classes. Setting the tag to NO turns the diagrams off. Note that +# this option also works with HAVE_DOT disabled, but it is recommended to # install and use dot, since it yields more powerful graphs. CLASS_DIAGRAMS = YES -# You can define message sequence charts within doxygen comments using the \msc -# command. Doxygen will then run the mscgen tool (see -# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the -# documentation. The MSCGEN_PATH tag allows you to specify the directory where -# the mscgen tool resides. If left empty the tool is assumed to be found in the +# You can define message sequence charts within doxygen comments using the \msc +# command. Doxygen will then run the mscgen tool (see +# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the +# documentation. The MSCGEN_PATH tag allows you to specify the directory where +# the mscgen tool resides. If left empty the tool is assumed to be found in the # default search path. -MSCGEN_PATH = +MSCGEN_PATH = -# If set to YES, the inheritance and collaboration graphs will hide -# inheritance and usage relations if the target is undocumented +# If set to YES, the inheritance and collaboration graphs will hide +# inheritance and usage relations if the target is undocumented # or is not a class. HIDE_UNDOC_RELATIONS = YES -# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is -# available from the path. This tool is part of Graphviz, a graph visualization -# toolkit from AT&T and Lucent Bell Labs. The other options in this section +# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is +# available from the path. This tool is part of Graphviz, a graph visualization +# toolkit from AT&T and Lucent Bell Labs. The other options in this section # have no effect if this option is set to NO (the default) HAVE_DOT = NO -# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is -# allowed to run in parallel. When set to 0 (the default) doxygen will -# base this on the number of processors available in the system. You can set it -# explicitly to a value larger than 0 to get control over the balance +# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is +# allowed to run in parallel. When set to 0 (the default) doxygen will +# base this on the number of processors available in the system. You can set it +# explicitly to a value larger than 0 to get control over the balance # between CPU load and processing speed. DOT_NUM_THREADS = 0 -# By default doxygen will use the Helvetica font for all dot files that -# doxygen generates. When you want a differently looking font you can specify -# the font name using DOT_FONTNAME. You need to make sure dot is able to find -# the font, which can be done by putting it in a standard location or by setting -# the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the +# By default doxygen will use the Helvetica font for all dot files that +# doxygen generates. When you want a differently looking font you can specify +# the font name using DOT_FONTNAME. You need to make sure dot is able to find +# the font, which can be done by putting it in a standard location or by setting +# the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the # directory containing the font. DOT_FONTNAME = Helvetica -# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. +# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. # The default size is 10pt. DOT_FONTSIZE = 10 -# By default doxygen will tell dot to use the Helvetica font. -# If you specify a different font using DOT_FONTNAME you can use DOT_FONTPATH to +# By default doxygen will tell dot to use the Helvetica font. +# If you specify a different font using DOT_FONTNAME you can use DOT_FONTPATH to # set the path where dot can find it. -DOT_FONTPATH = +DOT_FONTPATH = -# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen -# will generate a graph for each documented class showing the direct and -# indirect inheritance relations. Setting this tag to YES will force the -# the CLASS_DIAGRAMS tag to NO. +# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen +# will generate a graph for each documented class showing the direct and +# indirect inheritance relations. Setting this tag to YES will force the +# CLASS_DIAGRAMS tag to NO. CLASS_GRAPH = YES -# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen -# will generate a graph for each documented class showing the direct and -# indirect implementation dependencies (inheritance, containment, and +# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen +# will generate a graph for each documented class showing the direct and +# indirect implementation dependencies (inheritance, containment, and # class references variables) of the class with other documented classes. COLLABORATION_GRAPH = YES -# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen +# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen # will generate a graph for groups, showing the direct groups dependencies GROUP_GRAPHS = YES -# If the UML_LOOK tag is set to YES doxygen will generate inheritance and -# collaboration diagrams in a style similar to the OMG's Unified Modeling +# If the UML_LOOK tag is set to YES doxygen will generate inheritance and +# collaboration diagrams in a style similar to the OMG's Unified Modeling # Language. UML_LOOK = NO -# If set to YES, the inheritance and collaboration graphs will show the +# If the UML_LOOK tag is enabled, the fields and methods are shown inside +# the class node. If there are many fields or methods and many nodes the +# graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS +# threshold limits the number of items for each type to make the size more +# manageable. Set this to 0 for no limit. Note that the threshold may be +# exceeded by 50% before the limit is enforced. + +UML_LIMIT_NUM_FIELDS = 10 + +# If set to YES, the inheritance and collaboration graphs will show the # relations between templates and their instances. TEMPLATE_RELATIONS = NO -# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT -# tags are set to YES then doxygen will generate a graph for each documented -# file showing the direct and indirect include dependencies of the file with +# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT +# tags are set to YES then doxygen will generate a graph for each documented +# file showing the direct and indirect include dependencies of the file with # other documented files. INCLUDE_GRAPH = YES -# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and -# HAVE_DOT tags are set to YES then doxygen will generate a graph for each -# documented header file showing the documented files that directly or +# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and +# HAVE_DOT tags are set to YES then doxygen will generate a graph for each +# documented header file showing the documented files that directly or # indirectly include this file. INCLUDED_BY_GRAPH = YES -# If the CALL_GRAPH and HAVE_DOT options are set to YES then -# doxygen will generate a call dependency graph for every global function -# or class method. Note that enabling this option will significantly increase -# the time of a run. So in most cases it will be better to enable call graphs +# If the CALL_GRAPH and HAVE_DOT options are set to YES then +# doxygen will generate a call dependency graph for every global function +# or class method. Note that enabling this option will significantly increase +# the time of a run. So in most cases it will be better to enable call graphs # for selected functions only using the \callgraph command. CALL_GRAPH = NO -# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then -# doxygen will generate a caller dependency graph for every global function -# or class method. Note that enabling this option will significantly increase -# the time of a run. So in most cases it will be better to enable caller +# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then +# doxygen will generate a caller dependency graph for every global function +# or class method. Note that enabling this option will significantly increase +# the time of a run. So in most cases it will be better to enable caller # graphs for selected functions only using the \callergraph command. CALLER_GRAPH = NO -# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen +# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen # will generate a graphical hierarchy of all classes instead of a textual one. GRAPHICAL_HIERARCHY = YES -# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES -# then doxygen will show the dependencies a directory has on other directories -# in a graphical way. The dependency relations are determined by the #include +# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES +# then doxygen will show the dependencies a directory has on other directories +# in a graphical way. The dependency relations are determined by the #include # relations between the files in the directories. DIRECTORY_GRAPH = YES -# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images -# generated by dot. Possible values are svg, png, jpg, or gif. -# If left blank png will be used. If you choose svg you need to set -# HTML_FILE_EXTENSION to xhtml in order to make the SVG files +# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images +# generated by dot. Possible values are svg, png, jpg, or gif. +# If left blank png will be used. If you choose svg you need to set +# HTML_FILE_EXTENSION to xhtml in order to make the SVG files # visible in IE 9+ (other browsers do not have this requirement). DOT_IMAGE_FORMAT = png -# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to -# enable generation of interactive SVG images that allow zooming and panning. -# Note that this requires a modern browser other than Internet Explorer. -# Tested and working are Firefox, Chrome, Safari, and Opera. For IE 9+ you -# need to set HTML_FILE_EXTENSION to xhtml in order to make the SVG files +# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to +# enable generation of interactive SVG images that allow zooming and panning. +# Note that this requires a modern browser other than Internet Explorer. +# Tested and working are Firefox, Chrome, Safari, and Opera. For IE 9+ you +# need to set HTML_FILE_EXTENSION to xhtml in order to make the SVG files # visible. Older versions of IE do not have SVG support. INTERACTIVE_SVG = NO -# The tag DOT_PATH can be used to specify the path where the dot tool can be +# The tag DOT_PATH can be used to specify the path where the dot tool can be # found. If left blank, it is assumed the dot tool can be found in the path. -DOT_PATH = +DOT_PATH = -# The DOTFILE_DIRS tag can be used to specify one or more directories that -# contain dot files that are included in the documentation (see the +# The DOTFILE_DIRS tag can be used to specify one or more directories that +# contain dot files that are included in the documentation (see the # \dotfile command). -DOTFILE_DIRS = +DOTFILE_DIRS = -# The MSCFILE_DIRS tag can be used to specify one or more directories that -# contain msc files that are included in the documentation (see the +# The MSCFILE_DIRS tag can be used to specify one or more directories that +# contain msc files that are included in the documentation (see the # \mscfile command). -MSCFILE_DIRS = +MSCFILE_DIRS = -# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of -# nodes that will be shown in the graph. If the number of nodes in a graph -# becomes larger than this value, doxygen will truncate the graph, which is -# visualized by representing a node as a red box. Note that doxygen if the -# number of direct children of the root node in a graph is already larger than -# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note +# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of +# nodes that will be shown in the graph. If the number of nodes in a graph +# becomes larger than this value, doxygen will truncate the graph, which is +# visualized by representing a node as a red box. Note that doxygen if the +# number of direct children of the root node in a graph is already larger than +# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note # that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH. DOT_GRAPH_MAX_NODES = 50 -# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the -# graphs generated by dot. A depth value of 3 means that only nodes reachable -# from the root by following a path via at most 3 edges will be shown. Nodes -# that lay further from the root node will be omitted. Note that setting this -# option to 1 or 2 may greatly reduce the computation time needed for large -# code bases. Also note that the size of a graph can be further restricted by +# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the +# graphs generated by dot. A depth value of 3 means that only nodes reachable +# from the root by following a path via at most 3 edges will be shown. Nodes +# that lay further from the root node will be omitted. Note that setting this +# option to 1 or 2 may greatly reduce the computation time needed for large +# code bases. Also note that the size of a graph can be further restricted by # DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction. MAX_DOT_GRAPH_DEPTH = 0 -# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent -# background. This is disabled by default, because dot on Windows does not -# seem to support this out of the box. Warning: Depending on the platform used, -# enabling this option may lead to badly anti-aliased labels on the edges of +# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent +# background. This is disabled by default, because dot on Windows does not +# seem to support this out of the box. Warning: Depending on the platform used, +# enabling this option may lead to badly anti-aliased labels on the edges of # a graph (i.e. they become hard to read). DOT_TRANSPARENT = NO -# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output -# files in one run (i.e. multiple -o and -T options on the command line). This -# makes dot run faster, but since only newer versions of dot (>1.8.10) +# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output +# files in one run (i.e. multiple -o and -T options on the command line). This +# makes dot run faster, but since only newer versions of dot (>1.8.10) # support this, this feature is disabled by default. DOT_MULTI_TARGETS = NO -# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will -# generate a legend page explaining the meaning of the various boxes and +# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will +# generate a legend page explaining the meaning of the various boxes and # arrows in the dot generated graphs. GENERATE_LEGEND = YES -# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will -# remove the intermediate dot files that are used to generate +# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will +# remove the intermediate dot files that are used to generate # the various graphs. DOT_CLEANUP = YES diff --git a/documentation/cmake_build.rst b/documentation/cmake_build.rst index b12cf023..ffd26fc2 100644 --- a/documentation/cmake_build.rst +++ b/documentation/cmake_build.rst @@ -142,9 +142,12 @@ The following configuration arguments can be passed to the cmake command line. -DGLFW_LOCATION=[path to GLFW] -DMAYA_LOCATION=[path to Maya] - -DNO_OMP=1 // disable OpenMP - -DNO_GCD=1 // disable GrandCentralDispatch on OSX - -DNO_DOC=1 // disable documentation build + -DNO_EXAMPLES=1 // disable examples build + -DNO_REGRESSION=1 // disable regression tests build + -DNO_PYTHON=1 // disable Python SWIG build + -DNO_DOC=1 // disable documentation build + -DNO_OMP=1 // disable OpenMP + -DNO_GCD=1 // disable GrandCentralDispatch on OSX Environment Variables _____________________ diff --git a/documentation/nav_template.txt b/documentation/nav_template.txt index 409a975c..fa2911f7 100644 --- a/documentation/nav_template.txt +++ b/documentation/nav_template.txt @@ -104,7 +104,7 @@
  • Release Notes
    -
  • Doxygen
    • +
  • Doxygen
    • diff --git a/documentation/processHtml.py b/documentation/processHtml.py index e095e62d..fbcbab44 100755 --- a/documentation/processHtml.py +++ b/documentation/processHtml.py @@ -138,17 +138,20 @@ if (len(sys.argv)<3): rootDir = str(sys.argv[1]) -outputDir = str(sys.argv[2]) - -f = open( str(sys.argv[3]), "r") +f = open( str(sys.argv[2]), "r") navHtml = f.read() f.close() -print "rootDir="+rootDir+" outputDir="+outputDir +print "Scanning :"+rootDir searchIndex = 'var tipuesearch = { "pages": [ ' for root, dirs, files in os.walk(rootDir): + + # skip doxygen generated HTML + if 'doxy_html' in dirs: + dirs.remove('doxy_html') + for f in files: inputFile = os.path.join(root, f) @@ -191,5 +194,5 @@ for root, dirs, files in os.walk(rootDir): searchIndex = searchIndex + "]};" -WriteIndexFile( os.path.join(outputDir, "tipuesearch", "tipuesearch_content.js"), searchIndex ) +WriteIndexFile( os.path.join(rootDir, "tipuesearch", "tipuesearch_content.js"), searchIndex ) diff --git a/opensubdiv/far/CMakeLists.txt b/opensubdiv/far/CMakeLists.txt index af8e1f67..a74bc69b 100644 --- a/opensubdiv/far/CMakeLists.txt +++ b/opensubdiv/far/CMakeLists.txt @@ -55,6 +55,7 @@ # a particular purpose and non-infringement. # +#------------------------------------------------------------------------------- set(PUBLIC_HEADER_FILES bilinearSubdivisionTables.h bilinearSubdivisionTablesFactory.h @@ -78,6 +79,11 @@ set(PUBLIC_HEADER_FILES vertexEditTablesFactory.h ) +#------------------------------------------------------------------------------- +_add_doxy_headers( "${PUBLIC_HEADER_FILES}" ) + install( FILES ${PUBLIC_HEADER_FILES} DESTINATION ${CMAKE_INCDIR_BASE}/far PERMISSIONS OWNER_READ GROUP_READ WORLD_READ ) + +#------------------------------------------------------------------------------- diff --git a/opensubdiv/hbr/CMakeLists.txt b/opensubdiv/hbr/CMakeLists.txt index f851fa59..e84e9e5a 100644 --- a/opensubdiv/hbr/CMakeLists.txt +++ b/opensubdiv/hbr/CMakeLists.txt @@ -55,6 +55,7 @@ # a particular purpose and non-infringement. # +#------------------------------------------------------------------------------- set(PUBLIC_HEADER_FILES allocator.h bilinear.h @@ -75,6 +76,11 @@ set(PUBLIC_HEADER_FILES vertex.h ) +#------------------------------------------------------------------------------- +_add_doxy_headers( "${PUBLIC_HEADER_FILES}" ) + install( FILES ${PUBLIC_HEADER_FILES} DESTINATION ${CMAKE_INCDIR_BASE}/hbr PERMISSIONS OWNER_READ GROUP_READ WORLD_READ ) + +#------------------------------------------------------------------------------- diff --git a/opensubdiv/osd/CMakeLists.txt b/opensubdiv/osd/CMakeLists.txt index adaa28df..172b52ac 100644 --- a/opensubdiv/osd/CMakeLists.txt +++ b/opensubdiv/osd/CMakeLists.txt @@ -136,7 +136,12 @@ add_definitions( ${PLATFORM_COMPILE_FLAGS} ) +set(DOXY_HEADER_FILES ${PUBLIC_HEADER_FILES}) + #------------------------------------------------------------------------------- +set(GL_PTEX_PUBLIC_HEADERS glPtexTexture.h) +set(DX_PTEX_PUBLIC_HEADERS d3d11PtexTexture.h) + if( PTEX_FOUND ) list(APPEND CPU_SOURCE_FILES ptexTextureLoader.cpp @@ -146,7 +151,7 @@ if( PTEX_FOUND ) glPtexTexture.cpp ) list(APPEND PUBLIC_HEADER_FILES - glPtexTexture.h + ${GL_PTEX_PUBLIC_HEADERS} ) endif() if( DXSDK_FOUND ) @@ -154,7 +159,7 @@ if( PTEX_FOUND ) d3d11PtexTexture.cpp ) list(APPEND PUBLIC_HEADER_FILES - d3d11PtexTexture.h + ${DX_PTEX_PUBLIC_HEADERS} ) endif() include_directories( ${PTEX_INCLUDE_DIR} ) @@ -163,16 +168,25 @@ if( PTEX_FOUND ) ) endif() +list(APPEND DOXY_HEADER_FILES + ${GL_PTEX_PUBLIC_HEADERS} + ${DX_PTEX_PUBLIC_HEADERS} +) + #------------------------------------------------------------------------------- +set(OPENMP_PUBLIC_HEADERS + ompKernel.h + ompComputeController.h +) + if( OPENMP_FOUND ) list(APPEND CPU_SOURCE_FILES ompKernel.cpp ompComputeController.cpp ) - list(APPEND PUBLIC_HEADER_FILES - ompKernel.h - ompComputeController.h - ) + + list(APPEND PUBLIC_HEADER_FILES ${OPENMP_PUBLIC_HEADERS}) + if (CMAKE_COMPILER_IS_GNUCXX) list(APPEND PLATFORM_LIBRARIES gomp @@ -180,20 +194,34 @@ if( OPENMP_FOUND ) endif() endif() +list(APPEND DOXY_HEADER_FILES ${OPENMP_PUBLIC_HEADERS}) + #------------------------------------------------------------------------------- +set(GCD_PUBLIC_HEADERS + gcdKernel.h + gcdComputeController.h +) + if( GCD_FOUND ) list(APPEND CPU_SOURCE_FILES gcdKernel.cpp gcdComputeController.cpp ) - list(APPEND PUBLIC_HEADER_FILES - gcdKernel.h - gcdComputeController.h - ) + list(APPEND PUBLIC_HEADER_FILES ${GCD_PUBLIC_HEADERS}) endif() +list(APPEND DOXY_HEADER_FILES ${GCD_PUBLIC_HEADERS}) + #------------------------------------------------------------------------------- # GL code & dependencies +set(GL_PUBLIC_HEADERS + cpuGLVertexBuffer.h + glDrawContext.h + glDrawRegistry.h + glVertexBuffer.h + glMesh.h +) + if( OPENGL_FOUND OR OPENGLES_FOUND ) list(APPEND GPU_SOURCE_FILES cpuGLVertexBuffer.cpp @@ -201,13 +229,7 @@ if( OPENGL_FOUND OR OPENGLES_FOUND ) glDrawRegistry.cpp glVertexBuffer.cpp ) - list(APPEND PUBLIC_HEADER_FILES - cpuGLVertexBuffer.h - glDrawContext.h - glDrawRegistry.h - glVertexBuffer.h - glMesh.h - ) + list(APPEND PUBLIC_HEADER_FILES ${GL_PUBLIC_HEADERS}) if ( OPENGL_FOUND ) list(APPEND KERNEL_FILES glslPatchCommon.glsl @@ -222,20 +244,24 @@ if( OPENGL_FOUND OR OPENGLES_FOUND ) ) endif() +list(APPEND DOXY_HEADER_FILES ${GL_PUBLIC_HEADERS}) + #------------------------------------------------------------------------------- # OpenGL 4.2 dependencies # note : (GLSL transform feedback kernels require GL 4.2) +set(GL_4_2_PUBLIC_HEADERS + glslTransformFeedbackComputeContext.h + glslTransformFeedbackComputeController.h + glslTransformFeedbackKernelBundle.h +) + if( OPENGL_4_2_FOUND ) list(APPEND GPU_SOURCE_FILES glslTransformFeedbackComputeController.cpp glslTransformFeedbackComputeContext.cpp glslTransformFeedbackKernelBundle.cpp ) - list(APPEND PUBLIC_HEADER_FILES - glslTransformFeedbackComputeContext.h - glslTransformFeedbackComputeController.h - glslTransformFeedbackKernelBundle.h - ) + list(APPEND PUBLIC_HEADER_FILES ${GL_4_2_PUBLIC_HEADERS}) list(APPEND KERNEL_FILES glslTransformFeedbackKernel.glsl ) @@ -244,20 +270,24 @@ if( OPENGL_4_2_FOUND ) ) endif() +list(APPEND DOXY_HEADER_FILES ${GL_4_2_PUBLIC_HEADERS}) + #------------------------------------------------------------------------------- # OpenGL 4.3 dependencies # note : (GLSL compute shader kernels require GL 4.3) +set(GL_4_3_PUBLIC_HEADERS + glslComputeContext.h + glslComputeController.h + glslKernelBundle.h +) + if( OPENGL_4_3_FOUND ) list(APPEND GPU_SOURCE_FILES glslComputeController.cpp glslComputeContext.cpp glslKernelBundle.cpp ) - list(APPEND PUBLIC_HEADER_FILES - glslComputeContext.h - glslComputeController.h - glslKernelBundle.h - ) + list(APPEND PUBLIC_HEADER_FILES ${GL_4_3_PUBLIC_HEADERS}) list(APPEND KERNEL_FILES glslComputeKernel.glsl ) @@ -266,8 +296,20 @@ if( OPENGL_4_3_FOUND ) ) endif() +list(APPEND DOXY_HEADER_FILES ${GL_4_3_PUBLIC_HEADERS}) + #------------------------------------------------------------------------------- # DX11 code & dependencies +set(DXSDK_PUBLIC_HEADERS + cpuD3D11VertexBuffer.h + d3d11ComputeContext.h + d3d11ComputeController.h + d3d11DrawContext.h + d3d11DrawRegistry.h + d3d11KernelBundle.h + d3d11VertexBuffer.h + d3d11Mesh.h +) if( DXSDK_FOUND ) list(APPEND GPU_SOURCE_FILES cpuD3D11VertexBuffer.cpp @@ -278,16 +320,7 @@ if( DXSDK_FOUND ) d3d11KernelBundle.cpp d3d11VertexBuffer.cpp ) - list(APPEND PUBLIC_HEADER_FILES - cpuD3D11VertexBuffer.h - d3d11ComputeContext.h - d3d11ComputeController.h - d3d11DrawContext.h - d3d11DrawRegistry.h - d3d11KernelBundle.h - d3d11VertexBuffer.h - d3d11Mesh.h - ) + list(APPEND PUBLIC_HEADER_FILES ${DXSDK_PUBLIC_HEADERS}) list(APPEND KERNEL_FILES hlslComputeKernel.hlsl hlslPatchCommon.hlsl @@ -300,8 +333,15 @@ if( DXSDK_FOUND ) ) endif() +list(APPEND DOXY_HEADER_FILES ${DXSDK_PUBLIC_HEADERS}) + #------------------------------------------------------------------------------- # OpenCL code & dependencies +set(OPENCL_PUBLIC_HEADERS + clComputeContext.h + clComputeController.h + clVertexBuffer.h +) if ( OPENCL_FOUND ) list(APPEND GPU_SOURCE_FILES clComputeController.cpp @@ -309,11 +349,7 @@ if ( OPENCL_FOUND ) clKernelBundle.cpp clVertexBuffer.cpp ) - list(APPEND PUBLIC_HEADER_FILES - clComputeContext.h - clComputeController.h - clVertexBuffer.h - ) + list(APPEND PUBLIC_HEADER_FILES ${OPENCL_PUBLIC_HEADERS}) list(APPEND KERNEL_FILES clKernel.cl ) @@ -331,19 +367,22 @@ if ( OPENCL_FOUND ) endif() endif() +list(APPEND DOXY_HEADER_FILES ${OPENCL_PUBLIC_HEADERS}) + #------------------------------------------------------------------------------- # CUDA code & dependencies +set(CUDA_PUBLIC_HEADERS + cudaComputeContext.h + cudaComputeController.h + cudaVertexBuffer.h +) if( CUDA_FOUND ) list(APPEND GPU_SOURCE_FILES cudaComputeController.cpp cudaComputeContext.cpp cudaVertexBuffer.cpp ) - list(APPEND PUBLIC_HEADER_FILES - cudaComputeContext.h - cudaComputeController.h - cudaVertexBuffer.h - ) + list(APPEND PUBLIC_HEADER_FILES ${CUDA_PUBLIC_HEADERS}) list(APPEND KERNEL_FILES cudaKernel.cu ) @@ -370,6 +409,7 @@ if( CUDA_FOUND ) endif() endif() +list(APPEND DOXY_HEADER_FILES ${CUDA_PUBLIC_HEADERS}) #------------------------------------------------------------------------------- # Kernel Stringification @@ -461,6 +501,7 @@ if (NOT WIN32 AND NOT IOS) install( TARGETS osd_dynamic_gpu DESTINATION ${CMAKE_LIBDIR_BASE} ) endif() +_add_doxy_headers( "${DOXY_HEADER_FILES}" ) install( FILES ${PUBLIC_HEADER_FILES} DESTINATION ${CMAKE_INCDIR_BASE}/osd diff --git a/opensubdiv/osdutil/CMakeLists.txt b/opensubdiv/osdutil/CMakeLists.txt index 78a5c00b..bfd5015d 100644 --- a/opensubdiv/osdutil/CMakeLists.txt +++ b/opensubdiv/osdutil/CMakeLists.txt @@ -70,21 +70,30 @@ set(PUBLIC_HEADER_FILES drawController.h ) -#------------------------------------------------------------------------------- -# OpenCL code & dependencies -if ( OPENCL_FOUND ) - list(APPEND PUBLIC_HEADER_FILES - batchCL.h - ) -endif() +set(DOXY_HEADER_FILES ${PUBLIC_HEADER_FILES}) #------------------------------------------------------------------------------- -# platform dependent tweaks +# OpenCL code & dependencies + +set(OPENCL_PUBLIC_HEADER_FILES + batchCL.h +) + +if ( OPENCL_FOUND ) + list(APPEND PUBLIC_HEADER_FILES ${OPENCL_PUBLIC_HEADER_FILES} ) +endif() + +list(APPEND DOXY_HEADER_FILES ${OPENCL_PUBLIC_HEADER_FILES} ) + +#------------------------------------------------------------------------------- + +_add_doxy_headers( "${DOXY_HEADER_FILES}" ) install( FILES ${PUBLIC_HEADER_FILES} DESTINATION include/osdutil PERMISSIONS OWNER_READ GROUP_READ WORLD_READ ) +# platform dependent tweaks if (ANDROID) install( FILES Android.mk DESTINATION ${LIBRARY_OUTPUT_PATH_ROOT}