// // Copyright 2013 Pixar // // Licensed under the Apache License, Version 2.0 (the "Apache License") // with the following modification; you may not use this file except in // compliance with the Apache License and the following modification to it: // Section 6. Trademarks. is deleted and replaced with: // // 6. Trademarks. This License does not grant permission to use the trade // names, trademarks, service marks, or product names of the Licensor // and its affiliates, except as required to comply with Section 4(c) of // the License and to reproduce the content of the NOTICE file. // // You may obtain a copy of the Apache License at // // http://www.apache.org/licenses/LICENSE-2.0 // // Unless required by applicable law or agreed to in writing, software // distributed under the Apache License with the above modification is // distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY // KIND, either express or implied. See the Apache License for the specific // language governing permissions and limitations under the Apache License. // #ifndef OPENSUBDIV3_FAR_PATCH_PARAM_H #define OPENSUBDIV3_FAR_PATCH_PARAM_H #include "../version.h" #include "../far/types.h" namespace OpenSubdiv { namespace OPENSUBDIV_VERSION { namespace Far { /// \brief Patch parameterization /// /// Topological refinement splits coarse mesh faces into refined faces. /// /// This patch parameterzation describes the relationship between one /// of these refined faces and its corresponding coarse face. It is used /// both for refined faces that are represented as full limit surface /// parametric patches as well as for refined faces represented as simple /// triangles or quads. This parameterization is needed to interpolate /// primvar data across a refined face. /// /// The U,V and refinement level parameters describe the scale and offset /// needed to map a location on the patch between levels of refinement. /// The encoding of these values exploits the quad-tree organization of /// the faces produced by subdivision. We encode the U,V origin of the /// patch using two 10-bit integer values and the refinement level as /// a 4-bit integer. This is sufficient to represent up through 10 levels /// of refinement. /// /// Special consideration must be given to the refined faces resulting from /// irregular coarse faces. We adopt a convention similar to Ptex texture /// mapping and define the parameterization for these faces in terms of the /// regular faces resulting from the first topological splitting of the /// irregular coarse face. /// /// When computing the basis functions needed to evaluate the limit surface /// parametric patch representing a refined face, we also need to know which /// edges of the patch are interpolated boundaries. These edges are encoded /// as a boundary bitmask identifying the boundary edges of the patch in /// sequential order starting from the first vertex of the refined face. /// /// A sparse topological refinement (like feature adaptive refinement) can /// produce refined faces that are adjacent to faces at the next level of /// subdivision. We identify these transitional edges with a transition /// bitmask using the same encoding as the boundary bitmask. /// /// For triangular subdivision schemes we specify the parameterization using /// a similar method. Alternate triangles at a given level of refinement /// are parameterized from their opposite corners and encoded as occupying /// the opposite diagonal of the quad-tree hierarchy. The third barycentric /// coordinate is dependent on and can be derived from the other two /// coordinates. This encoding also takes inspiration from the Ptex /// texture mapping specification. /// /// Bitfield layout : /// /// Field0 | Bits | Content /// -----------|:----:|------------------------------------------------------ /// faceId | 28 | the faceId of the patch /// transition | 4 | transition edge mask encoding /// /// Field1 | Bits | Content /// -----------|:----:|------------------------------------------------------ /// level | 4 | the subdivision level of the patch /// nonquad | 1 | whether patch is refined from a non-quad face /// regular | 1 | whether patch is regular /// unused | 2 | unused /// boundary | 4 | boundary edge mask encoding /// v | 10 | log2 value of u parameter at first patch corner /// u | 10 | log2 value of v parameter at first patch corner /// /// Note : the bitfield is not expanded in the struct due to differences in how /// GPU & CPU compilers pack bit-fields and endian-ness. /// /*! \verbatim Quad Patch Parameterization (0,1) (1,1) +-------+-------+---------------+ | | | | | L2 | L2 | | |0,3 |1,3 | | +-------+-------+ L1 | | | | | | L2 | L2 | | |0,2 |1,2 |1,1 | +-------+-------+---------------+ | | | | | | | | | | L1 | L1 | | | | | | | |0,0 |1,0 | +---------------+---------------+ (0,0) (1,0) \endverbatim */ /*! \verbatim Triangle Patch Parameterization (0,1) (1,1) (0,1,0) +-------+-------+---------------+ + | \ | \ | \ | | \ |L2 \ |L2 \ | \ | | \ |0,3 \ |1,3 \ | \ | | L2 \ +-------+-------+ \ | +-------+ | \ | \ | L1 \ | | \ L2 | \ |L2 \ |L2 \ | \ | | \ | \ |0,2 \ |1,2 \ |1,1 \ | | L2 \ | L2 \ +-------+-------+---------------+ +-------+-------+ | \ | \ | | \ | \ | \ | \ | | \ | \ | \ | \ | | \ L1 | \ | \ | \ | | \ | \ | L1 \ | L1 \ | | L1 \ | L1 \ | \ | \ | | \ | \ |0,0 \ |1,0 \ | | \ | \ +---------------+---------------+ +---------------+---------------+ (0,0) (1,0) (0,0,1) (1,0,0) \endverbatim */ struct PatchParam { /// \brief Sets the values of the bit fields /// /// @param faceid face index /// /// @param u value of the u parameter for the first corner of the face /// @param v value of the v parameter for the first corner of the face /// /// @param depth subdivision level of the patch /// @param nonquad true if the root face is not a quad /// /// @param boundary 4-bits identifying boundary edges /// @param transition 4-bits identifying transition edges /// /// @param regular whether the patch is regular /// void Set(Index faceid, short u, short v, unsigned short depth, bool nonquad, unsigned short boundary, unsigned short transition, bool regular = false); /// \brief Resets everything to 0 void Clear() { field0 = field1 = 0; } /// \brief Returns the faceid Index GetFaceId() const { return Index(unpack(field0,28,0)); } /// \brief Returns the log2 value of the u parameter at /// the first corner of the patch unsigned short GetU() const { return (unsigned short)unpack(field1,10,22); } /// \brief Returns the log2 value of the v parameter at /// the first corner of the patch unsigned short GetV() const { return (unsigned short)unpack(field1,10,12); } /// \brief Returns the transition edge encoding for the patch. unsigned short GetTransition() const { return (unsigned short)unpack(field0,4,28); } /// \brief Returns the boundary edge encoding for the patch. unsigned short GetBoundary() const { return (unsigned short)unpack(field1,4,8); } /// \brief True if the parent base face is a non-quad bool NonQuadRoot() const { return (unpack(field1,1,4) != 0); } /// \brief Returns the level of subdivision of the patch unsigned short GetDepth() const { return (unsigned short)unpack(field1,4,0); } /// \brief Returns the fraction of unit parametric space covered by this face. float GetParamFraction() const; /// \brief A (u,v) pair in the fraction of parametric space covered by this /// face is mapped into a normalized parametric space. /// /// @param u u parameter /// @param v v parameter /// template void Normalize( REAL & u, REAL & v ) const; /// \brief A (u,v) pair in a normalized parametric space is mapped back into the /// fraction of parametric space covered by this face. /// /// @param u u parameter /// @param v v parameter /// template void Unnormalize( REAL & u, REAL & v ) const; /// \brief Returns whether the patch is regular bool IsRegular() const { return (unpack(field1,1,5) != 0); } unsigned int field0:32; unsigned int field1:32; private: unsigned int pack(unsigned int value, int width, int offset) const { return (unsigned int)((value & ((1<> offset) & ((1< PatchParamTable; typedef Vtr::Array PatchParamArray; typedef Vtr::ConstArray ConstPatchParamArray; inline void PatchParam::Set(Index faceid, short u, short v, unsigned short depth, bool nonquad, unsigned short boundary, unsigned short transition, bool regular) { field0 = pack(faceid, 28, 0) | pack(transition, 4, 28); field1 = pack(u, 10, 22) | pack(v, 10, 12) | pack(boundary, 4, 8) | pack(regular, 1, 5) | pack(nonquad, 1, 4) | pack(depth, 4, 0); } inline float PatchParam::GetParamFraction( ) const { return 1.0f / (float)(1 << (GetDepth() - NonQuadRoot())); } template inline void PatchParam::Normalize( REAL & u, REAL & v ) const { REAL fracInv = (REAL)(1.0f / GetParamFraction()); u = u * fracInv - (REAL)GetU(); v = v * fracInv - (REAL)GetV(); } template inline void PatchParam::Unnormalize( REAL & u, REAL & v ) const { REAL frac = (REAL)GetParamFraction(); u = (u + (REAL)GetU()) * frac; v = (v + (REAL)GetV()) * frac; } } // end namespace Far } // end namespace OPENSUBDIV_VERSION using namespace OPENSUBDIV_VERSION; } // end namespace OpenSubdiv #endif /* OPENSUBDIV3_FAR_PATCH_PARAM */