// // Copyright 2013 Pixar // // Licensed under the Apache License, Version 2.0 (the "Apache License") // with the following modification; you may not use this file except in // compliance with the Apache License and the following modification to it: // Section 6. Trademarks. is deleted and replaced with: // // 6. Trademarks. This License does not grant permission to use the trade // names, trademarks, service marks, or product names of the Licensor // and its affiliates, except as required to comply with Section 4(c) of // the License and to reproduce the content of the NOTICE file. // // You may obtain a copy of the Apache License at // // http://www.apache.org/licenses/LICENSE-2.0 // // Unless required by applicable law or agreed to in writing, software // distributed under the Apache License with the above modification is // distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY // KIND, either express or implied. See the Apache License for the specific // language governing permissions and limitations under the Apache License. // //-------------------------------------------------------------- // Uniforms / Uniform Blocks //-------------------------------------------------------------- #define NUM_LIGHTS 2 struct LightSource { vec4 position; vec4 ambient; vec4 diffuse; vec4 specular; }; layout(std140) uniform Constant { mat4 ModelViewMatrix; mat4 ProjectionMatrix; mat4 ModelViewProjectionMatrix; mat4 ModelViewInverseMatrix; LightSource lightSource[NUM_LIGHTS]; float TessLevel; float displacementScale; float mipmapBias; }; uniform int GregoryQuadOffsetBase; uniform int PrimitiveIdBase; //-------------------------------------------------------------- // Common //-------------------------------------------------------------- vec4 GeneratePatchCoord(vec2 uv, int primitiveID) // for non-adaptive { ivec3 patchParam = OsdGetPatchParam(OsdGetPatchIndex(primitiveID)); return OsdInterpolatePatchCoord(uv, patchParam); } #if defined(DISPLACEMENT_HW_BILINEAR) \ || defined(DISPLACEMENT_BILINEAR) \ || defined(DISPLACEMENT_BIQUADRATIC) \ || defined(NORMAL_HW_SCREENSPACE) \ || defined(NORMAL_SCREENSPACE) \ || defined(NORMAL_BIQUADRATIC) \ || defined(NORMAL_BIQUADRATIC_WG) uniform sampler2DArray textureDisplace_Data; uniform isamplerBuffer textureDisplace_Packing; #endif #if defined(DISPLACEMENT_HW_BILINEAR) || defined(DISPLACEMENT_BILINEAR) || defined(DISPLACEMENT_BIQUADRATIC) #undef OSD_DISPLACEMENT_CALLBACK #define OSD_DISPLACEMENT_CALLBACK \ outpt.v.position = \ displacement(outpt.v.position, \ outpt.v.normal, \ outpt.v.patchCoord); vec4 displacement(vec4 position, vec3 normal, vec4 patchCoord) { #if defined(DISPLACEMENT_HW_BILINEAR) float disp = PtexLookupFast(patchCoord, textureDisplace_Data, textureDisplace_Packing).x; #elif defined(DISPLACEMENT_BILINEAR) float disp = PtexMipmapLookup(patchCoord, mipmapBias, textureDisplace_Data, textureDisplace_Packing).x; #elif defined(DISPLACEMENT_BIQUADRATIC) float disp = PtexMipmapLookupQuadratic(patchCoord, mipmapBias, textureDisplace_Data, textureDisplace_Packing).x; #endif return position + vec4(disp * normal, 0) * displacementScale; } #endif //-------------------------------------------------------------- // Osd external functions //-------------------------------------------------------------- mat4 OsdModelViewMatrix() { return ModelViewMatrix; } mat4 OsdProjectionMatrix() { return ProjectionMatrix; } mat4 OsdModelViewProjectionMatrix() { return ModelViewProjectionMatrix; } float OsdTessLevel() { return TessLevel; } int OsdGregoryQuadOffsetBase() { return GregoryQuadOffsetBase; } int OsdPrimitiveIdBase() { return PrimitiveIdBase; } int OsdBaseVertex() { return 0; } //-------------------------------------------------------------- // Vertex Shader //-------------------------------------------------------------- #ifdef VERTEX_SHADER layout (location=0) in vec4 position; layout (location=1) in vec3 normal; out block { OutputVertex v; } outpt; void main() { outpt.v.position = ModelViewMatrix * position; outpt.v.normal = (ModelViewMatrix * vec4(normal, 0)).xyz; outpt.v.patchCoord = vec4(0); outpt.v.tessCoord = vec2(0); outpt.v.tangent = vec3(0); outpt.v.bitangent = vec3(0); } #endif //-------------------------------------------------------------- // Geometry Shader //-------------------------------------------------------------- #ifdef GEOMETRY_SHADER #ifdef PRIM_QUAD layout(lines_adjacency) in; layout(triangle_strip, max_vertices = 4) out; #define EDGE_VERTS 4 #endif // PRIM_QUAD #ifdef PRIM_TRI layout(triangles) in; layout(triangle_strip, max_vertices = 3) out; #define EDGE_VERTS 3 #endif // PRIM_TRI #ifdef PRIM_LINE layout(lines) in; layout(line_strip, max_vertices = 2) out; #define EDGE_VERTS 2 #endif // PRIM_LINE in block { OutputVertex v; } inpt[EDGE_VERTS]; out block { OutputVertex v; noperspective out vec4 edgeDistance; } outpt; // -------------------------------------- void emit(int index, vec4 position, vec3 normal, vec4 patchCoord) { outpt.v.position = position; outpt.v.patchCoord = patchCoord; outpt.v.normal = normal; outpt.v.tangent = inpt[index].v.tangent; outpt.v.bitangent = inpt[index].v.bitangent; #if defined(NORMAL_BIQUADRATIC_WG) outpt.v.Nu = inpt[index].v.Nu; outpt.v.Nv = inpt[index].v.Nv; #endif gl_Position = ProjectionMatrix * outpt.v.position; EmitVertex(); } const float VIEWPORT_SCALE = 1024.0; // XXXdyu float edgeDistance(vec4 p, vec4 p0, vec4 p1) { return VIEWPORT_SCALE * abs((p.x - p0.x) * (p1.y - p0.y) - (p.y - p0.y) * (p1.x - p0.x)) / length(p1.xy - p0.xy); } #if defined(PRIM_TRI) || defined(PRIM_QUAD) void emit(int index, vec4 position, vec3 normal, vec4 patchCoord, vec4 edgeVerts[EDGE_VERTS]) { outpt.edgeDistance[0] = edgeDistance(edgeVerts[index], edgeVerts[0], edgeVerts[1]); outpt.edgeDistance[1] = edgeDistance(edgeVerts[index], edgeVerts[1], edgeVerts[2]); #ifdef PRIM_TRI outpt.edgeDistance[2] = edgeDistance(edgeVerts[index], edgeVerts[2], edgeVerts[0]); #endif #ifdef PRIM_QUAD outpt.edgeDistance[2] = edgeDistance(edgeVerts[index], edgeVerts[2], edgeVerts[3]); outpt.edgeDistance[3] = edgeDistance(edgeVerts[index], edgeVerts[3], edgeVerts[0]); #endif emit(index, position, normal, patchCoord); } #endif // -------------------------------------- void main() { gl_PrimitiveID = gl_PrimitiveIDIn; #ifdef PRIM_QUAD vec4 patchCoord[4]; vec4 position[4]; vec3 normal[4]; // need to generate patch coord for non-patch quads patchCoord[0] = GeneratePatchCoord(vec2(0, 0), gl_PrimitiveID); patchCoord[1] = GeneratePatchCoord(vec2(1, 0), gl_PrimitiveID); patchCoord[2] = GeneratePatchCoord(vec2(1, 1), gl_PrimitiveID); patchCoord[3] = GeneratePatchCoord(vec2(0, 1), gl_PrimitiveID); #if defined(DISPLACEMENT_HW_BILINEAR) || defined(DISPLACEMENT_BILINEAR) || defined(DISPLACEMENT_BIQUADRATIC) position[0] = displacement(inpt[0].v.position, inpt[0].v.normal, patchCoord[0]); position[1] = displacement(inpt[1].v.position, inpt[1].v.normal, patchCoord[1]); position[2] = displacement(inpt[2].v.position, inpt[2].v.normal, patchCoord[2]); position[3] = displacement(inpt[3].v.position, inpt[3].v.normal, patchCoord[3]); #else position[0] = inpt[0].v.position; position[1] = inpt[1].v.position; position[2] = inpt[2].v.position; position[3] = inpt[3].v.position; #endif #ifdef NORMAL_FACET // XXX: need to use vec C to get triangle normal. vec3 A = (position[0] - position[1]).xyz; vec3 B = (position[3] - position[1]).xyz; vec3 C = (position[2] - position[1]).xyz; normal[0] = normalize(cross(B, A)); normal[1] = normal[0]; normal[2] = normal[0]; normal[3] = normal[0]; #else normal[0] = inpt[0].v.normal; normal[1] = inpt[1].v.normal; normal[2] = inpt[2].v.normal; normal[3] = inpt[3].v.normal; #endif #if defined(GEOMETRY_OUT_WIRE) || defined(GEOMETRY_OUT_LINE) vec4 edgeVerts[EDGE_VERTS]; edgeVerts[0] = ProjectionMatrix * inpt[0].v.position; edgeVerts[1] = ProjectionMatrix * inpt[1].v.position; edgeVerts[2] = ProjectionMatrix * inpt[2].v.position; edgeVerts[3] = ProjectionMatrix * inpt[3].v.position; edgeVerts[0].xy /= edgeVerts[0].w; edgeVerts[1].xy /= edgeVerts[1].w; edgeVerts[2].xy /= edgeVerts[2].w; edgeVerts[3].xy /= edgeVerts[3].w; emit(0, position[0], normal[0], patchCoord[0], edgeVerts); emit(1, position[1], normal[1], patchCoord[1], edgeVerts); emit(3, position[3], normal[3], patchCoord[3], edgeVerts); emit(2, position[2], normal[2], patchCoord[2], edgeVerts); #else outpt.edgeDistance[0] = 0; outpt.edgeDistance[1] = 0; outpt.edgeDistance[2] = 0; outpt.edgeDistance[3] = 0; emit(0, position[0], normal[0], patchCoord[0]); emit(1, position[1], normal[1], patchCoord[1]); emit(3, position[3], normal[3], patchCoord[3]); emit(2, position[2], normal[2], patchCoord[2]); #endif #endif // PRIM_QUAD #ifdef PRIM_TRI vec4 position[3]; vec4 patchCoord[3]; vec3 normal[3]; // patch coords are computed in tessellation shader patchCoord[0] = inpt[0].v.patchCoord; patchCoord[1] = inpt[1].v.patchCoord; patchCoord[2] = inpt[2].v.patchCoord; position[0] = inpt[0].v.position; position[1] = inpt[1].v.position; position[2] = inpt[2].v.position; #ifdef NORMAL_FACET // emit flat normals for displaced surface vec3 A = (position[0] - position[1]).xyz; vec3 B = (position[2] - position[1]).xyz; normal[0] = normalize(cross(B, A)); normal[1] = normal[0]; normal[2] = normal[0]; #else normal[0] = inpt[0].v.normal; normal[1] = inpt[1].v.normal; normal[2] = inpt[2].v.normal; #endif #if defined(GEOMETRY_OUT_WIRE) || defined(GEOMETRY_OUT_LINE) vec4 edgeVerts[EDGE_VERTS]; edgeVerts[0] = ProjectionMatrix * inpt[0].v.position; edgeVerts[1] = ProjectionMatrix * inpt[1].v.position; edgeVerts[2] = ProjectionMatrix * inpt[2].v.position; edgeVerts[0].xy /= edgeVerts[0].w; edgeVerts[1].xy /= edgeVerts[1].w; edgeVerts[2].xy /= edgeVerts[2].w; emit(0, position[0], normal[0], patchCoord[0], edgeVerts); emit(1, position[1], normal[1], patchCoord[1], edgeVerts); emit(2, position[2], normal[2], patchCoord[2], edgeVerts); #else emit(0, position[0], normal[0], patchCoord[0]); emit(1, position[1], normal[1], patchCoord[1]); emit(2, position[2], normal[2], patchCoord[2]); #endif #endif // PRIM_TRI #ifdef PRIM_LINE emit(0, inpt[0].v.position, inpt[0].v.normal, vec4(0)); emit(1, inpt[1].v.position, inpt[1].v.normal, vec4(0)); #endif EndPrimitive(); } #endif //-------------------------------------------------------------- // Fragment Shader //-------------------------------------------------------------- #ifdef FRAGMENT_SHADER in block { OutputVertex v; noperspective in vec4 edgeDistance; } inpt; out vec4 outColor; #if defined(COLOR_PTEX_NEAREST) || defined(COLOR_PTEX_HW_BILINEAR) || defined(COLOR_PTEX_BILINEAR) || defined(COLOR_PTEX_BIQUADRATIC) uniform sampler2DArray textureImage_Data; uniform isamplerBuffer textureImage_Packing; #endif #ifdef USE_PTEX_OCCLUSION uniform sampler2DArray textureOcclusion_Data; uniform isamplerBuffer textureOcclusion_Packing; #endif #ifdef USE_PTEX_SPECULAR uniform sampler2DArray textureSpecular_Data; uniform isamplerBuffer textureSpecular_Packing; #endif #if defined COLOR_PATCHTYPE uniform vec4 overrideColor; vec4 GetOverrideColor(ivec3 patchParam) { const vec4 patchColors[7*6] = vec4[7*6]( vec4(1.0f, 1.0f, 1.0f, 1.0f), // regular vec4(0.0f, 1.0f, 1.0f, 1.0f), // regular pattern 0 vec4(0.0f, 0.5f, 1.0f, 1.0f), // regular pattern 1 vec4(0.0f, 0.5f, 0.5f, 1.0f), // regular pattern 2 vec4(0.5f, 0.0f, 1.0f, 1.0f), // regular pattern 3 vec4(1.0f, 0.5f, 1.0f, 1.0f), // regular pattern 4 vec4(1.0f, 0.5f, 0.5f, 1.0f), // single crease vec4(1.0f, 0.70f, 0.6f, 1.0f), // single crease pattern 0 vec4(1.0f, 0.65f, 0.6f, 1.0f), // single crease pattern 1 vec4(1.0f, 0.60f, 0.6f, 1.0f), // single crease pattern 2 vec4(1.0f, 0.55f, 0.6f, 1.0f), // single crease pattern 3 vec4(1.0f, 0.50f, 0.6f, 1.0f), // single crease pattern 4 vec4(0.8f, 0.0f, 0.0f, 1.0f), // boundary vec4(0.0f, 0.0f, 0.75f, 1.0f), // boundary pattern 0 vec4(0.0f, 0.2f, 0.75f, 1.0f), // boundary pattern 1 vec4(0.0f, 0.4f, 0.75f, 1.0f), // boundary pattern 2 vec4(0.0f, 0.6f, 0.75f, 1.0f), // boundary pattern 3 vec4(0.0f, 0.8f, 0.75f, 1.0f), // boundary pattern 4 vec4(0.0f, 1.0f, 0.0f, 1.0f), // corner vec4(0.5f, 1.0f, 0.5f, 1.0f), // corner pattern 0 vec4(0.5f, 1.0f, 0.5f, 1.0f), // corner pattern 1 vec4(0.5f, 1.0f, 0.5f, 1.0f), // corner pattern 2 vec4(0.5f, 1.0f, 0.5f, 1.0f), // corner pattern 3 vec4(0.5f, 1.0f, 0.5f, 1.0f), // corner pattern 4 vec4(1.0f, 1.0f, 0.0f, 1.0f), // gregory vec4(1.0f, 1.0f, 0.0f, 1.0f), // gregory vec4(1.0f, 1.0f, 0.0f, 1.0f), // gregory vec4(1.0f, 1.0f, 0.0f, 1.0f), // gregory vec4(1.0f, 1.0f, 0.0f, 1.0f), // gregory vec4(1.0f, 1.0f, 0.0f, 1.0f), // gregory vec4(1.0f, 0.5f, 0.0f, 1.0f), // gregory boundary vec4(1.0f, 0.5f, 0.0f, 1.0f), // gregory boundary vec4(1.0f, 0.5f, 0.0f, 1.0f), // gregory boundary vec4(1.0f, 0.5f, 0.0f, 1.0f), // gregory boundary vec4(1.0f, 0.5f, 0.0f, 1.0f), // gregory boundary vec4(1.0f, 0.5f, 0.0f, 1.0f), // gregory boundary vec4(1.0f, 0.7f, 0.3f, 1.0f), // gregory basis vec4(1.0f, 0.7f, 0.3f, 1.0f), // gregory basis vec4(1.0f, 0.7f, 0.3f, 1.0f), // gregory basis vec4(1.0f, 0.7f, 0.3f, 1.0f), // gregory basis vec4(1.0f, 0.7f, 0.3f, 1.0f), // gregory basis vec4(1.0f, 0.7f, 0.3f, 1.0f) // gregory basis ); int patchType = 0; int edgeCount = bitCount(OsdGetPatchBoundaryMask(patchParam)); if (edgeCount == 1) { patchType = 2; // BOUNDARY } if (edgeCount > 1) { patchType = 3; // CORNER (not correct for patches that are not isolated) } #if defined OSD_PATCH_ENABLE_SINGLE_CREASE // check this after boundary/corner since single crease patch also has edgeCount. if (inpt.vSegments.y > 0) { patchType = 1; } #elif defined OSD_PATCH_GREGORY patchType = 4; #elif defined OSD_PATCH_GREGORY_BOUNDARY patchType = 5; #elif defined OSD_PATCH_GREGORY_BASIS patchType = 6; #elif defined OSD_PATCH_GREGORY_TRIANGLE patchType = 6; #endif int pattern = bitCount(OsdGetPatchTransitionMask(patchParam)); return patchColors[6*patchType + pattern]; } #endif #if defined(NORMAL_HW_SCREENSPACE) || defined(NORMAL_SCREENSPACE) vec3 perturbNormalFromDisplacement(vec3 position, vec3 normal, vec4 patchCoord) { // by Morten S. Mikkelsen // http://jbit.net/~sparky/sfgrad_bump/mm_sfgrad_bump.pdf // slightly modified for ptex guttering vec3 vSigmaS = dFdx(position); vec3 vSigmaT = dFdy(position); vec3 vN = normal; vec3 vR1 = cross(vSigmaT, vN); vec3 vR2 = cross(vN, vSigmaS); float fDet = dot(vSigmaS, vR1); #if 0 // not work well with ptex float dBs = dFdx(disp); float dBt = dFdy(disp); #else vec2 texDx = dFdx(patchCoord.xy); vec2 texDy = dFdy(patchCoord.xy); // limit forward differencing to the width of ptex gutter const float resolution = 128.0; float d = min(1, (0.5/resolution)/max(length(texDx), length(texDy))); vec4 STll = patchCoord; vec4 STlr = patchCoord + d * vec4(texDx.x, texDx.y, 0, 0); vec4 STul = patchCoord + d * vec4(texDy.x, texDy.y, 0, 0); #if defined NORMAL_HW_SCREENSPACE float Hll = PtexLookupFast(STll, textureDisplace_Data, textureDisplace_Packing).x * displacementScale; float Hlr = PtexLookupFast(STlr, textureDisplace_Data, textureDisplace_Packing).x * displacementScale; float Hul = PtexLookupFast(STul, textureDisplace_Data, textureDisplace_Packing).x * displacementScale; #elif defined NORMAL_SCREENSPACE float Hll = PtexMipmapLookup(STll, mipmapBias, textureDisplace_Data, textureDisplace_Packing).x * displacementScale; float Hlr = PtexMipmapLookup(STlr, mipmapBias, textureDisplace_Data, textureDisplace_Packing).x * displacementScale; float Hul = PtexMipmapLookup(STul, mipmapBias, textureDisplace_Data, textureDisplace_Packing).x * displacementScale; #endif float dBs = (Hlr - Hll)/d; float dBt = (Hul - Hll)/d; #endif vec3 vSurfGrad = sign(fDet) * (dBs * vR1 + dBt * vR2); return normalize(abs(fDet) * vN - vSurfGrad); } #endif // NORMAL_SCREENSPACE uniform sampler2D diffuseEnvironmentMap; uniform sampler2D specularEnvironmentMap; vec4 getEnvironmentHDR(sampler2D sampler, vec3 dir) { dir = (ModelViewInverseMatrix * vec4(dir, 0)).xyz; vec2 uv = vec2((atan(dir.x,dir.z)/3.1415926535897+1)*0.5, (1-dir.y)*0.5); vec4 tex = texture(sampler, uv); tex = vec4(pow(tex.xyz, vec3(0.4545)), 1); return tex; } vec4 lighting(vec4 texColor, vec3 Peye, vec3 Neye, float spec, float occ) { vec4 color = vec4(0); vec3 n = Neye; for (int i = 0; i < NUM_LIGHTS; ++i) { vec4 Plight = lightSource[i].position; vec3 l = (Plight.w == 0.0) ? normalize(Plight.xyz) : normalize(Plight.xyz - Peye); vec3 h = normalize(l + vec3(0,0,1)); // directional viewer float d = max(0.0, dot(n, l)); float s = pow(max(0.0, dot(n, h)), 64.0f); color += (1.0-occ) * ((lightSource[i].ambient + d * lightSource[i].diffuse) * texColor + spec * s * lightSource[i].specular); } color.a = 1; return color; } vec4 edgeColor(vec4 Cfill) { #if defined(GEOMETRY_OUT_WIRE) || defined(GEOMETRY_OUT_LINE) #ifdef PRIM_TRI float d = min(inpt.edgeDistance[0], min(inpt.edgeDistance[1], inpt.edgeDistance[2])); #endif #ifdef PRIM_QUAD float d = min(min(inpt.edgeDistance[0], inpt.edgeDistance[1]), min(inpt.edgeDistance[2], inpt.edgeDistance[3])); #endif #ifdef PRIM_LINE float d = 0; #endif vec4 Cedge = vec4(1.0, 1.0, 0.0, 1.0); float p = exp2(-2 * d * d); #if defined(GEOMETRY_OUT_WIRE) if (p < 0.25) discard; #endif Cfill.rgb = mix(Cfill.rgb, Cedge.rgb, p); #endif return Cfill; } #if defined(PRIM_QUAD) || defined(PRIM_TRI) void main() { // ------------ normal --------------- #if defined(NORMAL_HW_SCREENSPACE) || defined(NORMAL_SCREENSPACE) vec3 normal = perturbNormalFromDisplacement(inpt.v.position.xyz, inpt.v.normal, inpt.v.patchCoord); #elif defined(NORMAL_BIQUADRATIC) || defined(NORMAL_BIQUADRATIC_WG) vec4 du, dv; vec4 disp = PtexMipmapLookupQuadratic(du, dv, inpt.v.patchCoord, mipmapBias, textureDisplace_Data, textureDisplace_Packing); disp *= displacementScale; du *= displacementScale; dv *= displacementScale; vec3 n = normalize(cross(inpt.v.tangent, inpt.v.bitangent)); vec3 tangent = inpt.v.tangent + n * du.x; vec3 bitangent = inpt.v.bitangent + n * dv.x; #if defined(NORMAL_BIQUADRATIC_WG) tangent += inpt.v.Nu * disp.x; bitangent += inpt.v.Nv * disp.x; #endif vec3 normal = normalize(cross(tangent, bitangent)); #else vec3 normal = inpt.v.normal; #endif // ------------ color --------------- #if defined COLOR_PTEX_NEAREST vec4 texColor = PtexLookupNearest(inpt.v.patchCoord, textureImage_Data, textureImage_Packing); #elif defined COLOR_PTEX_HW_BILINEAR vec4 texColor = PtexLookupFast(inpt.v.patchCoord, textureImage_Data, textureImage_Packing); #elif defined COLOR_PTEX_BILINEAR vec4 texColor = PtexMipmapLookup(inpt.v.patchCoord, mipmapBias, textureImage_Data, textureImage_Packing); #elif defined COLOR_PTEX_BIQUADRATIC vec4 texColor = PtexMipmapLookupQuadratic(inpt.v.patchCoord, mipmapBias, textureImage_Data, textureImage_Packing); #elif defined COLOR_PATCHTYPE vec4 texColor = edgeColor(lighting(GetOverrideColor(OsdGetPatchParam(OsdGetPatchIndex(gl_PrimitiveID))), inpt.v.position.xyz, normal, 1, 0)); outColor = texColor; return; #elif defined COLOR_PATCHCOORD vec4 texColor = edgeColor(lighting(inpt.v.patchCoord, inpt.v.position.xyz, normal, 1, 0)); outColor = texColor; return; #elif defined COLOR_NORMAL vec4 texColor = edgeColor(vec4(normal, 1)); outColor = texColor; return; #else // COLOR_NONE vec4 texColor = vec4(0.5); #endif // gamma correct? // texColor = vec4(pow(texColor.xyz, vec3(0.4545)), 1); // ------------ occlusion --------------- #ifdef USE_PTEX_OCCLUSION float occ = PtexMipmapLookup(inpt.v.patchCoord, mipmapBias, textureOcclusion_Data, textureOcclusion_Packing).x; #else float occ = 0.0; #endif // ------------ specular --------------- #ifdef USE_PTEX_SPECULAR float specular = PtexMipmapLookup(inpt.v.patchCoord, mipmapBias, textureSpecular_Data, textureSpecular_Packing).x; #else float specular = 1.0; #endif // ------------ lighting --------------- #ifdef USE_IBL vec4 a = vec4(0, 0, 0, 1); //ambientColor; vec4 d = getEnvironmentHDR(diffuseEnvironmentMap, normal) * 1.4; vec3 eye = normalize(inpt.v.position.xyz - vec3(0,0,0)); vec3 reflect = reflect(eye, normal); vec4 s = getEnvironmentHDR(specularEnvironmentMap, reflect); const float fresnelBias = 0; const float fresnelScale = 1.0; const float fresnelPower = 4.0; float fresnel = fresnelBias + fresnelScale * pow(1.0+dot(normal,eye), fresnelPower); a *= (1.0-occ); d *= (1.0-occ); s *= min(specular, (1.0-occ)) * fresnel; vec4 Cf = (a + d) * texColor + s * 0.5; #else vec4 Cf = lighting(texColor, inpt.v.position.xyz, normal, specular, occ); #endif // ------------ wireframe --------------- outColor = edgeColor(Cf); } #endif //PRIM_TRI || PRIM_QUAD #if defined(PRIM_LINE) void main() { outColor = vec4(0, 1, 0, 1); } #endif #endif