//
//   Copyright 2019 DreamWorks Animation LLC.
//
//   Licensed under the Apache License, Version 2.0 (the "Apache License")
//   with the following modification; you may not use this file except in
//   compliance with the Apache License and the following modification to it:
//   Section 6. Trademarks. is deleted and replaced with:
//
//   6. Trademarks. This License does not grant permission to use the trade
//      names, trademarks, service marks, or product names of the Licensor
//      and its affiliates, except as required to comply with Section 4(c) of
//      the License and to reproduce the content of the NOTICE file.
//
//   You may obtain a copy of the Apache License at
//
//       http://www.apache.org/licenses/LICENSE-2.0
//
//   Unless required by applicable law or agreed to in writing, software
//   distributed under the Apache License with the above modification is
//   distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
//   KIND, either express or implied. See the Apache License for the specific
//   language governing permissions and limitations under the Apache License.
//

static const std::string loop_nonman_edges =
"#\n"
"#   Nine shapes ordered left->right and top->bottom in the XZ plane\n"
"#\n"
"#   Shape 1:  top-left\n"
"#\n"
"v -1.75      0.0 1.083333\n"
"v -1.583333  0.0 1.25\n"
"v -1.416667  0.0 1.416667\n"
"v -1.25      0.0 1.583333\n"
"v -1.083333  0.0 1.416667\n"
"v -0.916667  0.0 1.25\n"
"v -0.75      0.0 1.083333\n"
"v -1.583333  0.0 0.916667\n"
"v -1.416667  0.0 1.083333\n"
"v -1.25      0.0 1.25\n"
"v -1.083333  0.0 1.083333\n"
"v -0.916667  0.0 0.916667\n"
"v -1.45      0.2 1.05\n"
"v -1.35      0.2 1.15\n"
"v -1.15      0.2 1.15\n"
"v -1.05      0.2 1.05\n"
"v -1.45     -0.2 1.05\n"
"v -1.35     -0.2 1.15\n"
"v -1.15     -0.2 1.15\n"
"v -1.05     -0.2 1.05\n"
"\n"
"vt 0.02 0.83\n"
"vt 0.07 0.88\n"
"vt 0.12 0.93\n"
"vt 0.17 0.98\n"
"vt 0.22 0.93\n"
"vt 0.27 0.88\n"
"vt 0.32 0.83\n"
"vt 0.07 0.78\n"
"vt 0.12 0.83\n"
"vt 0.17 0.88\n"
"vt 0.22 0.83\n"
"vt 0.27 0.78\n"
"vt 0.11 0.78\n"
"vt 0.14 0.78\n"
"vt 0.20 0.78\n"
"vt 0.23 0.78\n"
"vt 0.11 0.68\n"
"vt 0.14 0.68\n"
"vt 0.20 0.68\n"
"vt 0.23 0.68\n"
"vt 0.07 0.73\n"
"vt 0.12 0.73\n"
"vt 0.17 0.73\n"
"vt 0.22 0.73\n"
"vt 0.27 0.73\n"
"\n"
"f  1/1   8/8   2/2 \n"
"f  2/2   8/8   9/9 \n"
"f  2/2   9/9   3/3 \n"
"f  3/3   9/9  10/10\n"
"f  3/3  10/10  4/4 \n"
"f  4/4  10/10  5/5 \n"
"f  5/5  10/10 11/11\n"
"f  5/5  11/11  6/6 \n"
"f  6/6  11/11 12/12\n"
"f  6/6  12/12  7/7 \n"
"f 13/13  8/21  9/22\n"
"f 13/13  9/22 14/14\n"
"f 14/14  9/22 10/23\n"
"f 14/14 10/23 15/15\n"
"f 15/15 10/23 11/24\n"
"f 15/15 11/24 16/16\n"
"f 16/16 11/24 12/25\n"
"f 17/17  9/22  8/21\n"
"f 17/17 18/18  9/22\n"
"f 18/18 10/23  9/22\n"
"f 18/18 19/19 10/23\n"
"f 19/19 11/24 10/23\n"
"f 19/19 20/20 11/24\n"
"f 20/20 12/25 11/24\n"
"\n"
"#\n"
"#   Shape 2:  top-middle\n"
"#\n"
"v -0.333333  0.0  0.81698\n"
"v  0.0       0.0  0.81698\n"
"v  0.333333  0.0  0.81698\n"
"v -0.5       0.0  1.10566\n"
"v -0.166667 -0.25 1.10566\n"
"v  0.166667 -0.25 1.10566\n"
"v  0.5       0.0  1.10566\n"
"v -0.333333  0.0  1.39434\n"
"v  0.0      -0.25 1.39434\n"
"v  0.333333  0.0  1.39434\n"
"v -0.166667  0.0  1.68302\n"
"v  0.166667  0.0  1.68302\n"
"v  0.0      -0.50 1.25\n"
"\n"
"vt 0.40 0.68\n"
"vt 0.50 0.68\n"
"vt 0.60 0.68\n"
"vt 0.35 0.77\n"
"vt 0.45 0.77\n"
"vt 0.55 0.77\n"
"vt 0.65 0.77\n"
"vt 0.40 0.85\n"
"vt 0.50 0.85\n"
"vt 0.60 0.85\n"
"vt 0.45 0.93\n"
"vt 0.55 0.93\n"
"vt 0.50 1.00\n"
"vt 0.45 0.94\n"
"vt 0.55 0.94\n"
"\n"
"f 21/26 22/27 25/30\n"
"f 22/27 23/28 26/31\n"
"f 21/26 25/30 24/29\n"
"f 22/27 26/31 25/30\n"
"f 23/28 27/32 26/31\n"
"f 24/29 25/30 28/33\n"
"f 25/30 26/31 29/34\n"
"f 26/31 27/32 30/35\n"
"f 25/30 29/34 28/33\n"
"f 26/31 30/35 29/34\n"
"f 28/33 29/34 31/36\n"
"f 29/34 30/35 32/37\n"
"f 29/34 32/37 31/36\n"
"#  Add face to existing manifold edge, making it non-manifold:\n"
"f 33/38 25/39 26/40\n"
"\n"
"#\n"
"#   Shape 3:  top-right\n"
"#\n"
"v  1.25  0.25 1.25\n"
"v  1.25 -0.25 1.25\n"
"v  1.25  0    1.75\n"
"v  0.9   0    1.6\n"
"v  0.75  0    1.25\n"
"v  0.9   0    0.9\n"
"v  1.25  0    0.75\n"
"v  1.6   0    0.9\n"
"v  1.75  0    1.25\n"
"v  1.6   0    1.6\n"
"\n"
"vt 0.68 0.74\n"
"vt 0.80 0.74\n"
"vt 0.74 0.68\n"
"vt 0.74 0.80\n"
"vt 0.85 0.74\n"
"vt 0.97 0.74\n"
"vt 0.91 0.68\n"
"vt 0.91 0.80\n"
"vt 0.68 0.91\n"
"vt 0.80 0.91\n"
"vt 0.74 0.85\n"
"vt 0.74 0.97\n"
"vt 0.85 0.91\n"
"vt 0.97 0.91\n"
"vt 0.91 0.85\n"
"vt 0.91 0.97\n"
"\n"
"f 34/41 35/42 36/44\n"
"f 35/42 34/41 40/43\n"
"f 34/45 35/46 37/48\n"
"f 35/46 34/45 41/47\n"
"f 34/49 35/50 38/52\n"
"f 35/50 34/49 42/51\n"
"f 34/53 35/54 39/56\n"
"f 35/54 34/53 43/55\n"
"\n"
"#\n"
"#   Shape 4:  center-left\n"
"#\n"
"v -1.70   0    -0.15\n"
"v -1.40  -0.2  -0.15\n"
"v -1.10  -0.2  -0.15\n"
"v -0.80   0    -0.15\n"
"v -1.55   0     0.15\n"
"v -1.25  -0.2   0.15\n"
"v -0.95   0     0.15\n"
"\n"
"vt 0.04 0.46\n"
"vt 0.12 0.46\n"
"vt 0.22 0.46\n"
"vt 0.31 0.46\n"
"vt 0.08 0.55\n"
"vt 0.17 0.55\n"
"vt 0.26 0.55\n"
"\n"
"f 44/57 45/58 48/61\n"
"f 45/58 46/59 49/62\n"
"f 46/59 47/60 50/63\n"
"f 45/58 49/62 48/61\n"
"f 46/59 50/63 49/62\n"
"#  Add triangle with degenerate edge along existing edge:\n"
"f 46/59 46/59 49/62\n"
"\n"
"#\n"
"#   Shape 5:  center-middle\n"
"#\n"
"v -0.333333  0.0  -0.43302\n"
"v  0.0       0.0  -0.43302\n"
"v  0.333333  0.0  -0.43302\n"
"v -0.5       0.0  -0.14434\n"
"v -0.166667 -0.25 -0.14434\n"
"v  0.166667 -0.25 -0.14434\n"
"v  0.5       0.0  -0.14434\n"
"v -0.333333  0.0   0.14434\n"
"v  0.0      -0.25  0.14434\n"
"v  0.333333  0.0   0.14434\n"
"v -0.166667  0.0   0.43302\n"
"v  0.166667  0.0   0.43302\n"
"\n"
"vt 0.40 0.37\n"
"vt 0.50 0.37\n"
"vt 0.60 0.37\n"
"vt 0.35 0.46\n"
"vt 0.45 0.46\n"
"vt 0.55 0.46\n"
"vt 0.65 0.46\n"
"vt 0.40 0.54\n"
"vt 0.50 0.54\n"
"vt 0.60 0.54\n"
"vt 0.45 0.63\n"
"vt 0.55 0.63\n"
"\n"
"f 51/64 52/65 55/68\n"
"f 52/65 53/66 56/69\n"
"f 51/64 55/68 54/67\n"
"f 52/65 56/69 55/68\n"
"f 53/66 57/70 56/69\n"
"f 54/67 55/68 58/71\n"
"f 55/68 56/69 59/72\n"
"f 56/69 57/70 60/73\n"
"f 55/68 59/72 58/71\n"
"f 56/69 60/73 59/72\n"
"f 58/71 59/72 61/74\n"
"f 59/72 60/73 62/75\n"
"f 59/72 62/75 61/74\n"
"#  Add a triangle with a degenerate edge to the interior:\n"
"f 55/68 56/69 56/69\n"
"\n"
"#\n"
"#   Shape 6:  center-right\n"
"#\n"
"v 0.916667  0.0  -0.43302\n"
"v 1.25      0.0  -0.43302\n"
"v 1.583333  0.0  -0.43302\n"
"v 0.75      0.0  -0.14434\n"
"v 1.083333 -0.25 -0.14434\n"
"v 1.416667 -0.25 -0.14434\n"
"v 1.75      0.0  -0.14434\n"
"v 0.916667  0.0   0.14434\n"
"v 1.25     -0.25  0.14434\n"
"v 1.583333  0.0   0.14434\n"
"v 1.083333  0.0   0.43302\n"
"v 1.416667  0.0   0.43302\n"
"\n"
"vt 0.73 0.37\n"
"vt 0.83 0.37\n"
"vt 0.93 0.37\n"
"vt 0.68 0.46\n"
"vt 0.78 0.46\n"
"vt 0.88 0.46\n"
"vt 0.98 0.46\n"
"vt 0.73 0.54\n"
"vt 0.83 0.54\n"
"vt 0.93 0.54\n"
"vt 0.78 0.63\n"
"vt 0.88 0.63\n"
"\n"
"f 63/76 64/77 67/80\n"
"f 64/77 65/78 68/81\n"
"f 63/76 67/80 66/79\n"
"f 64/77 68/81 67/80\n"
"f 65/78 69/82 68/81\n"
"f 66/79 67/80 70/83\n"
"f 67/80 68/81 71/84\n"
"f 68/81 69/82 72/85\n"
"f 67/80 71/84 70/83\n"
"f 68/81 72/85 71/84\n"
"f 70/83 71/84 73/86\n"
"f 71/84 72/85 74/87\n"
"f 71/84 74/87 73/86\n"
"#  Add a completely degenerate triangle to the interior:\n"
"f 67/80 67/80 67/80\n"
"\n"
"#\n"
"#   Shape 7:  bottom-left\n"
"#\n"
"v -1.25 0.0 -1.25\n"
"\n"
"vt 0.12 0.12\n"
"vt 0.22 0.12\n"
"vt 0.17 0.22\n"
"\n"
"f 75/88 75/89 75/90\n"
"\n"
"#\n"
"#   Shape 8:  bottom-middle\n"
"#\n"
"v -0.5     0   -1.35\n"
"v -0.25   -0.1 -1.35\n"
"v  0       0   -1.35\n"
"v  0.25   -0.1 -1.35\n"
"v  0.5     0   -1.35\n"
"v -0.375   0   -1.15\n"
"v -0.125  -0.1 -1.15\n"
"v  0.125  -0.1 -1.15\n"
"v  0.375   0   -1.15\n"
"\n"
"vt 0.35 0.14\n"
"vt 0.43 0.14\n"
"vt 0.50 0.14\n"
"vt 0.57 0.14\n"
"vt 0.65 0.14\n"
"vt 0.39 0.20\n"
"vt 0.46 0.20\n"
"vt 0.54 0.20\n"
"vt 0.61 0.20\n"
"\n"
"f 76/91 77/92 81/96\n"
"f 77/92 82/97 81/96\n"
"#  Reverse winding of the 3 middle faces:\n"
"f 82/97 78/93 77/92\n"
"f 82/97 83/98 78/93\n"
"f 83/98 79/94 78/93\n"
"f 79/94 84/99 83/98\n"
"f 79/94 80/95 84/99\n"
"\n"
"#\n"
"#   Shape 9:  bottom-right\n"
"#\n"
"v 0.916667  0.0  -1.68302\n"
"v 1.25      0.0  -1.68302\n"
"v 1.583333  0.0  -1.68302\n"
"v 0.75      0.0  -1.39434\n"
"v 1.083333 -0.25 -1.39434\n"
"v 1.416667 -0.25 -1.39434\n"
"v 1.75      0.0  -1.39434\n"
"v 0.916667  0.0  -1.10566\n"
"v 1.25     -0.25 -1.10566\n"
"v 1.583333  0.0  -1.10566\n"
"v 1.083333  0.0  -0.81698\n"
"v 1.416667  0.0  -0.81698\n"
"\n"
"vt 0.73 0.04\n"
"vt 0.83 0.04\n"
"vt 0.93 0.04\n"
"vt 0.68 0.13\n"
"vt 0.78 0.13\n"
"vt 0.88 0.13\n"
"vt 0.98 0.13\n"
"vt 0.73 0.21\n"
"vt 0.83 0.21\n"
"vt 0.93 0.21\n"
"vt 0.78 0.30\n"
"vt 0.88 0.30\n"
"\n"
"f  85/100  86/101  89/104\n"
"f  86/101  87/102  90/105\n"
"f  85/100  89/104  88/103\n"
"f  86/101  90/105  89/104\n"
"f  87/102  91/106  90/105\n"
"f  88/103  89/104  92/107\n"
"#  Reverse the winding order of the interior face:\n"
"f  93/108  90/105  89/104\n"
"f  90/105  91/106  94/109\n"
"f  89/104  93/108  92/107\n"
"f  90/105  94/109  93/108\n"
"f  92/107  93/108  95/110\n"
"f  93/108  94/109  96/111\n"
"f  93/108  96/111  95/110\n"
"\n"
"t interpolateboundary 1/0/0 1\n"
"\n"
;