AuroraMiddleware/OpenSubdiv
1
0
Fork 0
mirror of https://github.com/PixarAnimationStudios/OpenSubdiv synced 2024-11-09 22:00:06 +00:00
Code Issues Releases Wiki Activity
33a3d3bc87
OpenSubdiv/regression/common/hbr_utils.h
barry c424594625 Major step towards consistent use of include paths in source files: 
- changed the main OPENSUBDIV_INCLUDE_DIR to exclude ./opensubdiv
    - updated CMakeLists.txt files in non-examples to use only this path
    - updated CMakeLists.txt files in examples to append ./opensubdiv to path
    - updated source in regression/common to use #include <opensubdiv/...>
    - updated source in examples/common to use #include <opensubdiv/...>
    - deferred source in examples to be updated on a case-by-case basis
2018-10-09 10:51:31 -07:00

718 lines
28 KiB
C++
Raw Blame History

//
// Copyright 2013 Pixar
//
// Licensed under the Apache License, Version 2.0 (the "Apache License")
// with the following modification; you may not use this file except in
// compliance with the Apache License and the following modification to it:
// Section 6. Trademarks. is deleted and replaced with:
//
// 6. Trademarks. This License does not grant permission to use the trade
// names, trademarks, service marks, or product names of the Licensor
// and its affiliates, except as required to comply with Section 4(c) of
// the License and to reproduce the content of the NOTICE file.
//
// You may obtain a copy of the Apache License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the Apache License with the above modification is
// distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
// KIND, either express or implied. See the Apache License for the specific
// language governing permissions and limitations under the Apache License.
//
#ifndef HBR_UTILS_H
#define HBR_UTILS_H
#ifndef HBR_ADAPTIVE
#define HBR_ADAPTIVE
#endif
#include "shape_utils.h"
#include <opensubdiv/hbr/mesh.h>
#include <opensubdiv/hbr/bilinear.h>
#include <opensubdiv/hbr/loop.h>
#include <opensubdiv/hbr/catmark.h>
#include <opensubdiv/hbr/vertexEdit.h>
#include <opensubdiv/hbr/cornerEdit.h>
#include <opensubdiv/hbr/holeEdit.h>
#include <sstream>
//------------------------------------------------------------------------------
template <class T>
void applyTags( OpenSubdiv::HbrMesh<T> * mesh, Shape const * sh ) {
for (int i=0; i<(int)sh->tags.size(); ++i) {
Shape::tag * t = sh->tags[i];
if (t->name=="crease") {
for (int j=0; j<(int)t->intargs.size()-1; j += 2) {
OpenSubdiv::HbrVertex<T> * v = mesh->GetVertex( t->intargs[j] ),
* w = mesh->GetVertex( t->intargs[j+1] );
OpenSubdiv::HbrHalfedge<T> * e = 0;
if( v && w ) {
if((e = v->GetEdge(w)) == 0)
e = w->GetEdge(v);
if(e) {
int nfloat = (int) t->floatargs.size();
e->SetSharpness( std::max(0.0f, ((nfloat > 1) ? t->floatargs[j] : t->floatargs[0])) );
} else
printf("cannot find edge for crease tag (%d,%d)\n", t->intargs[j], t->intargs[j+1] );
}
}
} else if (t->name=="corner") {
for (int j=0; j<(int)t->intargs.size(); ++j) {
OpenSubdiv::HbrVertex<T> * v = mesh->GetVertex( t->intargs[j] );
if(v) {
int nfloat = (int) t->floatargs.size();
v->SetSharpness( std::max(0.0f, ((nfloat > 1) ? t->floatargs[j] : t->floatargs[0])) );
} else
printf("cannot find vertex for corner tag (%d)\n", t->intargs[j] );
}
} else if (t->name=="hole") {
for (int j=0; j<(int)t->intargs.size(); ++j) {
OpenSubdiv::HbrFace<T> * f = mesh->GetFace( t->intargs[j] );
if(f) {
f->SetHole();
} else
printf("cannot find face for hole tag (%d)\n", t->intargs[j] );
}
} else if (t->name=="interpolateboundary") {
if ((int)t->intargs.size()!=1) {
printf("expecting 1 integer for \"interpolateboundary\" tag n. %d\n", i);
continue;
}
switch( t->intargs[0] ) {
case 0 : mesh->SetInterpolateBoundaryMethod(OpenSubdiv::HbrMesh<T>::k_InterpolateBoundaryNone); break;
case 1 : mesh->SetInterpolateBoundaryMethod(OpenSubdiv::HbrMesh<T>::k_InterpolateBoundaryEdgeAndCorner); break;
case 2 : mesh->SetInterpolateBoundaryMethod(OpenSubdiv::HbrMesh<T>::k_InterpolateBoundaryEdgeOnly); break;
default: printf("unknown interpolate boundary : %d\n", t->intargs[0] ); break;
}
} else if (t->name=="facevaryinginterpolateboundary") {
if ((int)t->intargs.size()!=1) {
printf("expecting 1 integer for \"facevaryinginterpolateboundary\" tag n. %d\n", i);
continue;
}
switch( t->intargs[0] ) {
case 0 : mesh->SetFVarInterpolateBoundaryMethod(OpenSubdiv::HbrMesh<T>::k_InterpolateBoundaryNone); break;
case 1 : mesh->SetFVarInterpolateBoundaryMethod(OpenSubdiv::HbrMesh<T>::k_InterpolateBoundaryEdgeAndCorner); break;
case 2 : mesh->SetFVarInterpolateBoundaryMethod(OpenSubdiv::HbrMesh<T>::k_InterpolateBoundaryEdgeOnly); break;
case 3 : mesh->SetFVarInterpolateBoundaryMethod(OpenSubdiv::HbrMesh<T>::k_InterpolateBoundaryAlwaysSharp); break;
default: printf("unknown facevarying interpolate boundary : %d\n", t->intargs[0] ); break;
}
} else if (t->name=="facevaryingpropagatecorners") {
if ((int)t->intargs.size()==1)
mesh->SetFVarPropagateCorners( t->intargs[0] != 0 );
else
printf( "expecting single int argument for \"facevaryingpropagatecorners\"\n" );
} else if (t->name=="smoothtriangles") {
OpenSubdiv::HbrCatmarkSubdivision<T> * scheme =
dynamic_cast<OpenSubdiv::HbrCatmarkSubdivision<T> *>( mesh->GetSubdivision() );
if (! scheme) {
printf("the \"smoothtriangles\" tag can only be applied to Catmark meshes\n");
continue;
}
if ((int)t->intargs.size()==0) {
printf("the \"smoothtriangles\" tag expects an int argument\n");
continue;
}
if( t->intargs[0]==1 )
scheme->SetTriangleSubdivisionMethod(
OpenSubdiv::HbrCatmarkSubdivision<T>::k_Old);
else if( t->intargs[0]==2 )
scheme->SetTriangleSubdivisionMethod(
OpenSubdiv::HbrCatmarkSubdivision<T>::k_New);
else
printf("the \"smoothtriangles\" tag only accepts 1 or 2 as value (%d)\n", t->intargs[0]);
} else if (t->name=="creasemethod") {
OpenSubdiv::HbrSubdivision<T> * scheme = mesh->GetSubdivision();
assert(scheme);
if ((int)t->stringargs.size()==0) {
printf("the \"creasemethod\" tag expects a string argument\n");
continue;
}
if( t->stringargs[0]=="normal" )
scheme->SetCreaseSubdivisionMethod(
OpenSubdiv::HbrSubdivision<T>::k_CreaseNormal);
else if( t->stringargs[0]=="chaikin" )
scheme->SetCreaseSubdivisionMethod(
OpenSubdiv::HbrSubdivision<T>::k_CreaseChaikin);
else
printf("the \"creasemethod\" tag only accepts \"normal\" or \"chaikin\" as value (%s)\n", t->stringargs[0].c_str());
} else if (t->name=="vertexedit" || t->name=="edgeedit") {
int nops = 0;
int floatstride = 0;
int maxfloatwidth = 0;
std::vector<typename OpenSubdiv::HbrHierarchicalEdit<T>::Operation > ops;
std::vector<std::string> opnames;
std::vector<std::string> varnames;
std::vector<typename OpenSubdiv::HbrHierarchicalEdit<T>::Operation > opmodifiers;
std::vector<int> floatwidths;
std::vector<bool> isP;
std::vector<int> vvindex;
for (int j=0; j<(int)t->stringargs.size(); j+=3) {
const std::string & opname = t->stringargs[j+2];
const std::string & opmodifiername = t->stringargs[j];
const std::string & varname = t->stringargs[j+1];
typename OpenSubdiv::HbrHierarchicalEdit<T>::Operation opmodifier = OpenSubdiv::HbrVertexEdit<T>::Set;
if (opmodifiername == "set") {
opmodifier = OpenSubdiv::HbrHierarchicalEdit<T>::Set;
} else if (opmodifiername == "add") {
opmodifier = OpenSubdiv::HbrHierarchicalEdit<T>::Add;
} else if (opmodifiername == "subtract") {
opmodifier = OpenSubdiv::HbrHierarchicalEdit<T>::Subtract;
} else {
printf("invalid modifier %s\n", opmodifiername.c_str());
continue;
}
if ((t->name=="vertexedit" && opname=="value") || opname=="sharpness") {
nops++;
// only varname="P" is supported here for now.
if (varname != "P") continue;
vvindex.push_back(0);
isP.push_back(true);
opnames.push_back(opname);
opmodifiers.push_back(opmodifier);
varnames.push_back(varname);
if (opname=="sharpness") {
floatwidths.push_back(1);
floatstride += 1;
} else {
// assuming width of P == 3. should be replaced with 'P 0 3' like declaration
int numElements = 3;
maxfloatwidth = std::max(maxfloatwidth, numElements);
floatwidths.push_back(numElements);
floatstride += numElements;
}
} else {
printf("%s tag specifies invalid operation '%s %s' on Subdivmesh\n", t->name.c_str(), opmodifiername.c_str(), opname.c_str());
}
}
float *xformed = (float*)alloca(maxfloatwidth * sizeof(float));
int floatoffset = 0;
for(int j=0; j<nops; ++j) {
int floatidx = floatoffset;
for (int k=0; k < (int)t->intargs.size();) {
int pathlength = t->intargs[k];
int faceid = t->intargs[k+1];
int vertexid = t->intargs[k+pathlength];
int nsubfaces = pathlength - 2;
int *subfaces = &t->intargs[k+2];
OpenSubdiv::HbrFace<T> * f = mesh->GetFace(faceid);
if (!f) {
printf("Invalid face %d specified for %s tag on SubdivisionMesh.\n", faceid, t->name.c_str());
goto nexttag;
}
// Found the face. Do some preliminary error checking to make sure the path is
// correct. First value in path depends on the number of vertices of the face
// which we have in hand
if (nsubfaces && (subfaces[0] < 0 || subfaces[0] >= f->GetNumVertices()) ) {
printf("Invalid path component %d in %s tag on SubdivisionMesh.\n", subfaces[0], t->name.c_str());
goto nexttag;
}
// All subsequent values must be less than 4 (FIXME or 3 in the loop case?)
for (int l=1; l<nsubfaces; ++l) {
if (subfaces[l] < 0 || subfaces[l] > 3) {
printf("Invalid path component %d in %s tag on SubdivisionMesh.\n", subfaces[0], t->name.c_str());
goto nexttag;
}
}
if (vertexid < 0 || vertexid > 3) {
printf("Invalid path component (vertexid) %d in %s tag on SubdivisionMesh.\n", vertexid, t->name.c_str());
goto nexttag;
}
// Transform all the float values associated with the tag if needed
if(opnames[j] != "sharpness") {
for(int l=0; l<floatwidths[j]; ++l) {
xformed[l] = t->floatargs[l + floatidx];
}
// Edits of facevarying data are a different hierarchical edit type altogether
OpenSubdiv::HbrVertexEdit<T> * edit = new OpenSubdiv::HbrVertexEdit<T>(faceid, nsubfaces, subfaces,
vertexid, vvindex[j], floatwidths[j],
isP[j], opmodifiers[j], xformed);
mesh->AddHierarchicalEdit(edit);
} else {
if (t->name == "vertexedit") {
OpenSubdiv::HbrCornerEdit<T> * edit = new OpenSubdiv::HbrCornerEdit<T>(faceid, nsubfaces, subfaces,
vertexid, opmodifiers[j], t->floatargs[floatidx]);
mesh->AddHierarchicalEdit(edit);
} else {
OpenSubdiv::HbrCreaseEdit<T> * edit = new OpenSubdiv::HbrCreaseEdit<T>(faceid, nsubfaces, subfaces,
vertexid, opmodifiers[j], t->floatargs[floatidx]);
mesh->AddHierarchicalEdit(edit);
}
}
// Advance to next path
k += pathlength + 1;
// Advance to start of float data
floatidx += floatstride;
} // End of integer processing loop
// Next subop
floatoffset += floatwidths[j];
} // End of subop processing loop
} else if (t->name=="faceedit") {
int nint = (int)t->intargs.size();
for (int k=0; k<nint; ) {
int pathlength = t->intargs[k];
if (k+pathlength>=nint) {
printf("Invalid path length for %s tag on SubdivisionMesh", t->name.c_str());
goto nexttag;
}
int faceid = t->intargs[k+1];
int nsubfaces = pathlength - 1;
int *subfaces = &t->intargs[k+2];
OpenSubdiv::HbrFace<T> * f = mesh->GetFace(faceid);
if (!f) {
printf("Invalid face %d specified for %s tag on SubdivisionMesh.\n", faceid, t->name.c_str());
goto nexttag;
}
// Found the face. Do some preliminary error checking to make sure the path is
// correct. First value in path depends on the number of vertices of the face
// which we have in hand
if (nsubfaces && (subfaces[0] < 0 || subfaces[0] >= f->GetNumVertices()) ) {
printf("Invalid path component %d in %s tag on SubdivisionMesh.\n", subfaces[0], t->name.c_str());
goto nexttag;
}
// All subsequent values must be less than 4 (FIXME or 3 in the loop case?)
for (int l=1; l<nsubfaces; ++l) {
if (subfaces[l] < 0 || subfaces[l] > 3) {
printf("Invalid path component %d in %s tag on SubdivisionMesh.\n", subfaces[0], t->name.c_str());
goto nexttag;
}
}
// Now loop over string ops
int nstring = (int)t->stringargs.size();
for (int l = 0; l < nstring; ) {
if ( t->stringargs[l] == "hole" ) {
// Construct the edit
OpenSubdiv::HbrHoleEdit<T> * edit = new OpenSubdiv::HbrHoleEdit<T>(faceid, nsubfaces, subfaces);
mesh->AddHierarchicalEdit(edit);
++l;
} else if ( t->stringargs[l] == "attributes" ) {
// see NgpSubdivMesh.cpp:4341
printf("\"attributes\" face tag not supported yet.\n");
goto nexttag;
} else if ( t->stringargs[l] == "set" || t->stringargs[l] == "add" ) {
// see NgpSubdivMesh.cpp:4341
printf("\"set\" and \"add\" face tag not supported yet.\n");
goto nexttag;
} else {
printf("Faceedit tag specifies invalid operation '%s' on Subdivmesh.\n", t->stringargs[l].c_str());
goto nexttag;
}
}
// Advance to next path
k += pathlength + 1;
} // end face path loop
} else {
printf("Unknown tag : \"%s\" - skipping\n", t->name.c_str());
}
nexttag: ;
}
}
//------------------------------------------------------------------------------
template <class T> std::string
hbrToObj( OpenSubdiv::HbrMesh<T> * mesh ) {
std::stringstream sh;
sh<<"# This file uses centimeters as units for non-parametric coordinates.\n\n";
int nv = mesh->GetNumVertices();
for (int i=0; i<nv; ++i) {
const float * pos = mesh->GetVertex(i)->GetData().GetPos();
sh << "v " << pos[0] << " " << pos[1] << " " << pos[2] <<"\n";
}
int nf = mesh->GetNumFaces();
for (int i=0; i<nf; ++i) {
sh << "f ";
OpenSubdiv::HbrFace<T> * f = mesh->GetFace(i);
for (int j=0; j<f->GetNumVertices(); ++j) {
int vert = f->GetVertex(j)->GetID()+1;
sh << vert << "/" << vert << "/" << vert << " ";
}
sh << "\n";
}
sh << "\n";
return sh.str();
}
//------------------------------------------------------------------------------
template <class T> OpenSubdiv::HbrMesh<T> *
createMesh( Scheme scheme=kCatmark, int fvarwidth=0) {
OpenSubdiv::HbrMesh<T> * mesh = 0;
static OpenSubdiv::HbrBilinearSubdivision<T> _bilinear;
static OpenSubdiv::HbrLoopSubdivision<T> _loop;
static OpenSubdiv::HbrCatmarkSubdivision<T> _catmark;
static int indices[2] = { 0, 1 },
widths[2] = { 1, 1 };
int const fvarcount = fvarwidth > 0 ? 2 : 0,
* fvarindices = fvarwidth > 0 ? indices : NULL,
* fvarwidths = fvarwidth > 0 ? widths : NULL;
switch (scheme) {
case kBilinear : mesh = new OpenSubdiv::HbrMesh<T>( &_bilinear,
fvarcount,
fvarindices,
fvarwidths,
fvarwidth ); break;
case kLoop : mesh = new OpenSubdiv::HbrMesh<T>( &_loop,
fvarcount,
fvarindices,
fvarwidths,
fvarwidth ); break;
case kCatmark : mesh = new OpenSubdiv::HbrMesh<T>( &_catmark,
fvarcount,
fvarindices,
fvarwidths,
fvarwidth ); break;
}
return mesh;
}
//------------------------------------------------------------------------------
template <class T> void
createVerticesWithPositions(Shape const * sh, OpenSubdiv::HbrMesh<T> * mesh) {
T v;
for(int i=0;i<sh->GetNumVertices(); i++ ) {
v.SetPosition( sh->verts[i*3], sh->verts[i*3+1], sh->verts[i*3+2] );
mesh->NewVertex( i, v );
}
}
//------------------------------------------------------------------------------
template <class T> void
createVertices(Shape const * sh, OpenSubdiv::HbrMesh<T> * mesh) {
T v;
for(int i=0;i<sh->GetNumVertices(); i++ )
mesh->NewVertex( i, v );
}
//------------------------------------------------------------------------------
template <class T> void
copyVertexPositions( Shape const * sh, OpenSubdiv::HbrMesh<T> * mesh, std::vector<float> & verts ) {
int nverts = mesh->GetNumVertices();
verts.resize( nverts * 3 );
std::copy(sh->verts.begin(), sh->verts.end(), verts.begin());
// Sometimes Hbr dupes some vertices during Mesh::Finish() and our example
// code uses those vertices to draw coarse control cages and such
std::vector<std::pair<int, int> > const splits = mesh->GetSplitVertices();
for (int i=0; i<(int)splits.size(); ++i) {
memcpy(&verts[splits[i].first*3], &sh->verts[splits[i].second*3], 3*sizeof(float));
}
}
//------------------------------------------------------------------------------
template <class T> void
createTopology( Shape const * sh, OpenSubdiv::HbrMesh<T> * mesh, Scheme scheme) {
const int * fv=&(sh->faceverts[0]);
for(int f=0, ptxidx=0;f<sh->GetNumFaces(); f++ ) {
int nv = sh->nvertsPerFace[f];
if ((scheme==kLoop) && (nv!=3)) {
printf("Trying to create a Loop subd with non-triangle face\n");
exit(1);
}
bool valid = true;
for(int j=0;j<nv;j++) {
OpenSubdiv::HbrVertex<T> * origin = mesh->GetVertex( fv[j] );
OpenSubdiv::HbrVertex<T> * destination = mesh->GetVertex( fv[(j+1)%nv] );
OpenSubdiv::HbrHalfedge<T> * opposite = destination->GetEdge(origin);
if(origin==NULL || destination==NULL) {
printf(" An edge was specified that connected a nonexistent vertex\n");
valid=false;
break;
}
if(origin == destination) {
printf(" An edge was specified that connected a vertex to itself\n");
valid=false;
break;
}
if(opposite && opposite->GetOpposite() ) {
printf(" A non-manifold edge incident to more than 2 faces was found\n");
valid=false;
break;
}
if(origin->GetEdge(destination)) {
printf(" An edge connecting two vertices was specified more than once."
" It's likely that an incident face was flipped\n");
valid=false;
break;
}
}
if (valid) {
OpenSubdiv::HbrFace<T> * face = mesh->NewFace(nv, (int *)fv, 0);
face->SetPtexIndex(ptxidx);
if ( (scheme==kCatmark || scheme==kBilinear) && nv != 4 ) {
ptxidx+=nv;
} else {
ptxidx++;
}
}
fv+=nv;
}
mesh->SetInterpolateBoundaryMethod(
OpenSubdiv::HbrMesh<T>::k_InterpolateBoundaryEdgeOnly);
mesh->GetSubdivision()->SetCreaseSubdivisionMethod(
OpenSubdiv::HbrSubdivision<T>::k_CreaseNormal);
if (OpenSubdiv::HbrCatmarkSubdivision<T> * hscheme =
dynamic_cast<OpenSubdiv::HbrCatmarkSubdivision<T> *>(mesh->GetSubdivision())) {
hscheme->SetTriangleSubdivisionMethod(
OpenSubdiv::HbrCatmarkSubdivision<T>::k_Normal);
}
applyTags<T>( mesh, sh );
mesh->Finish();
// check for disconnected vertices
if (mesh->GetNumDisconnectedVertices()) {
printf("The specified subdivmesh contains disconnected surface components.\n");
}
}
//------------------------------------------------------------------------------
template <class T> void
createFaceVaryingUV( Shape const * sh, OpenSubdiv::HbrMesh<T> * mesh) {
if (! sh->HasUV())
return;
for (int i=0, idx=0; i<sh->GetNumFaces(); ++i ) {
OpenSubdiv::HbrFace<T> * f = mesh->GetFace(i);
int nv = sh->nvertsPerFace[i];
OpenSubdiv::HbrHalfedge<T> * e = f->GetFirstEdge();
for (int j=0; j<nv; ++j, e=e->GetNext()) {
OpenSubdiv::HbrFVarData<T> & fvt = e->GetOrgVertex()->GetFVarData(f);
float const * fvdata = &sh->uvs[ sh->faceuvs[idx++]*2 ];
if (! fvt.IsInitialized()) {
fvt.SetAllData(2, fvdata);
} else if (! fvt.CompareAll(2, fvdata)) {
OpenSubdiv::HbrFVarData<T> & nfvt = e->GetOrgVertex()->NewFVarData(f);
nfvt.SetAllData(2, fvdata);
}
}
}
}
//------------------------------------------------------------------------------
template <class T> OpenSubdiv::HbrMesh<T> *
simpleHbr(Shape const * sh, std::vector<float> * verts=0, bool fvar=false) {
int fvarwidth = fvar && sh->HasUV() ? 2 : 0;
OpenSubdiv::HbrMesh<T> * mesh = createMesh<T>(sh->scheme, fvarwidth);
createVerticesWithPositions<T>(sh, mesh);
createTopology<T>(sh, mesh, sh->scheme);
if (fvar)
createFaceVaryingUV<T>(sh, mesh);
if (verts)
copyVertexPositions<T>(sh, mesh, *verts);
return mesh;
}
template <class T> OpenSubdiv::HbrMesh<T> *
simpleHbr(char const * Shapestr, Scheme scheme, std::vector<float> * verts=0, bool fvar=false) {
Shape const * sh = Shape::parseObj( Shapestr, scheme );
OpenSubdiv::HbrMesh<T> * mesh = simpleHbr<T>(sh, verts, fvar);
delete sh;
return mesh;
}
//------------------------------------------------------------------------------
template <class T> OpenSubdiv::HbrMesh<T> *
simpleHbr(Shape const * sh, std::vector<float> & verts, bool fvar=false) {
int fvarwidth = fvar && sh->HasUV() ? 2 : 0;
OpenSubdiv::HbrMesh<T> * mesh = createMesh<T>(sh->scheme, fvarwidth);
createVertices<T>(sh, mesh);
createTopology<T>(sh, mesh, sh->scheme);
if (fvar)
createFaceVaryingUV<T>(sh, mesh);
copyVertexPositions<T>(sh, mesh, verts);
return mesh;
}
template <class T> OpenSubdiv::HbrMesh<T> *
simpleHbr(char const * Shapestr, Scheme scheme, std::vector<float> & verts, bool fvar=false) {
Shape const * sh = Shape::parseObj( Shapestr, scheme );
OpenSubdiv::HbrMesh<T> *mesh = simpleHbr<T>(sh, verts, fvar);
delete sh;
return mesh;
}
//------------------------------------------------------------------------------
template <class T>
OpenSubdiv::HbrMesh<T> *
interpolateHbrVertexData(Shape const * sh, int maxlevel) {
// Hbr interpolation
OpenSubdiv::HbrMesh<T> *hmesh = simpleHbr<T>(sh, /* verts vector */ 0, /* fvar */ false);
assert(hmesh);
for (int level=0, firstface=0; level<maxlevel; ++level ) {
int nfaces = hmesh->GetNumFaces();
for (int i=firstface; i<nfaces; ++i) {
OpenSubdiv::HbrFace<T> * f = hmesh->GetFace(i);
assert(f->GetDepth()==level);
if (! f->IsHole()) {
f->Refine();
}
}
// Hbr allocates faces sequentially, skip faces that have already been
// refined.
firstface = nfaces;
}
return hmesh;
}
template <class T>
OpenSubdiv::HbrMesh<T> *
interpolateHbrVertexData(char const * Shapestr, Scheme scheme, int maxlevel) {
Shape const * sh = Shape::parseObj( Shapestr, scheme );
OpenSubdiv::HbrMesh<T> *mesh = interpolateHbrVertexData<T>(sh, maxlevel);
delete sh;
return mesh;
}
//------------------------------------------------------------------------------
// Returns true if a vertex or any of its parents is on a boundary
template <class T>
bool
hbrVertexOnBoundary(const OpenSubdiv::HbrVertex<T> *v)
{
if (! v)
return false;
if (v->OnBoundary())
return true;
OpenSubdiv::HbrVertex<T> const * pv = v->GetParentVertex();
if (pv)
return hbrVertexOnBoundary(pv);
else {
OpenSubdiv::HbrHalfedge<T> const * pe = v->GetParentEdge();
if (pe) {
return hbrVertexOnBoundary(pe->GetOrgVertex()) ||
hbrVertexOnBoundary(pe->GetDestVertex());
} else {
OpenSubdiv::HbrFace<T> const * pf = v->GetParentFace(), * rootf = pf;
while (pf) {
pf = pf->GetParent();
if (pf)
rootf=pf;
}
if (rootf)
for (int i=0; i<rootf->GetNumVertices(); ++i)
if (rootf->GetVertex(i)->OnBoundary())
return true;
}
}
return false;
}
#endif /* HBR_UTILS_H */
Reference in New Issue View Git Blame Copy Permalink