OpenSubdiv/examples/glBatchViewer/shader_gl3.glsl
Takahito Tejima 51a45b598d Updating EULA
2013-07-18 14:19:50 -07:00

312 lines
7.2 KiB
GLSL

//
// Copyright 2013 Pixar
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License
// and the following modification to it: Section 6 Trademarks.
// deleted and replaced with:
//
// 6. Trademarks. This License does not grant permission to use the
// trade names, trademarks, service marks, or product names of the
// Licensor and its affiliates, except as required for reproducing
// the content of the NOTICE file.
//
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing,
// software distributed under the License is distributed on an
// "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND,
// either express or implied. See the License for the specific
// language governing permissions and limitations under the
// License.
//
layout(std140) uniform Transform {
mat4 ModelViewMatrix;
mat4 ProjectionMatrix;
mat4 ModelViewProjectionMatrix;
mat4 ModelViewInverseMatrix;
};
//--------------------------------------------------------------
// Vertex Shader
//--------------------------------------------------------------
#ifdef VERTEX_SHADER
layout (location=0) in vec4 position;
layout (location=1) in vec3 normal;
out vec4 vPosition;
out vec3 vNormal;
void main()
{
vPosition = ModelViewMatrix * position;
vNormal = (ModelViewMatrix * vec4(normal, 0.0)).xyz;
}
#endif
//--------------------------------------------------------------
// Geometry Shader
//--------------------------------------------------------------
#ifdef GEOMETRY_SHADER
#ifdef PRIM_QUAD
layout(lines_adjacency) in;
layout(triangle_strip, max_vertices = 4) out;
#define EDGE_VERTS 4
in vec4 vPosition[4];
in vec3 vNormal[4];
#endif // PRIM_QUAD
#ifdef PRIM_TRI
layout(triangles) in;
layout(triangle_strip, max_vertices = 3) out;
#define EDGE_VERTS 3
in vec4 vPosition[3];
in vec3 vNormal[3];
#endif // PRIM_TRI
#ifdef PRIM_POINT
layout(points) in;
layout(points, max_vertices = 1) out;
in vec4 vPosition[1];
in vec3 vNormal[1];
#endif // PRIM_POINT
out vec4 gPosition;
out vec3 gNormal;
noperspective out vec4 gEdgeDistance;
void emit(int index, vec3 normal)
{
gPosition = vPosition[index];
#ifdef SMOOTH_NORMALS
gNormal = vNormal[index];
#else
gNormal = normal;
#endif
gl_Position = ProjectionMatrix * vPosition[index];
EmitVertex();
}
#if defined(GEOMETRY_OUT_WIRE) || defined(GEOMETRY_OUT_LINE)
const float VIEWPORT_SCALE = 1024.0; // XXXdyu
float edgeDistance(vec4 p, vec4 p0, vec4 p1)
{
return VIEWPORT_SCALE *
abs((p.x - p0.x) * (p1.y - p0.y) -
(p.y - p0.y) * (p1.x - p0.x)) / length(p1.xy - p0.xy);
}
void emit(int index, vec3 normal, vec4 edgeVerts[EDGE_VERTS])
{
gEdgeDistance[0] =
edgeDistance(edgeVerts[index], edgeVerts[0], edgeVerts[1]);
gEdgeDistance[1] =
edgeDistance(edgeVerts[index], edgeVerts[1], edgeVerts[2]);
#ifdef PRIM_TRI
gEdgeDistance[2] =
edgeDistance(edgeVerts[index], edgeVerts[2], edgeVerts[0]);
#endif
#ifdef PRIM_QUAD
gEdgeDistance[2] =
edgeDistance(edgeVerts[index], edgeVerts[2], edgeVerts[3]);
gEdgeDistance[3] =
edgeDistance(edgeVerts[index], edgeVerts[3], edgeVerts[0]);
#endif
emit(index, normal);
}
#endif
void main()
{
gl_PrimitiveID = gl_PrimitiveIDIn;
#ifdef PRIM_POINT
emit(0, vec3(0));
#endif
#ifdef PRIM_QUAD
vec3 A = (vPosition[0] - vPosition[1]).xyz;
vec3 B = (vPosition[3] - vPosition[1]).xyz;
vec3 C = (vPosition[2] - vPosition[1]).xyz;
vec3 n0 = normalize(cross(B, A));
#if defined(GEOMETRY_OUT_WIRE) || defined(GEOMETRY_OUT_LINE)
vec4 edgeVerts[EDGE_VERTS];
edgeVerts[0] = ProjectionMatrix * vPosition[0];
edgeVerts[1] = ProjectionMatrix * vPosition[1];
edgeVerts[2] = ProjectionMatrix * vPosition[2];
edgeVerts[3] = ProjectionMatrix * vPosition[3];
edgeVerts[0].xy /= edgeVerts[0].w;
edgeVerts[1].xy /= edgeVerts[1].w;
edgeVerts[2].xy /= edgeVerts[2].w;
edgeVerts[3].xy /= edgeVerts[3].w;
emit(0, n0, edgeVerts);
emit(1, n0, edgeVerts);
emit(3, n0, edgeVerts);
emit(2, n0, edgeVerts);
#else
emit(0, n0);
emit(1, n0);
emit(3, n0);
emit(2, n0);
#endif
#endif // PRIM_QUAD
#ifdef PRIM_TRI
vec3 A = (vPosition[1] - vPosition[0]).xyz;
vec3 B = (vPosition[2] - vPosition[0]).xyz;
vec3 n0 = normalize(cross(B, A));
#if defined(GEOMETRY_OUT_WIRE) || defined(GEOMETRY_OUT_LINE)
vec4 edgeVerts[EDGE_VERTS];
edgeVerts[0] = ProjectionMatrix * vPosition[0];
edgeVerts[1] = ProjectionMatrix * vPosition[1];
edgeVerts[2] = ProjectionMatrix * vPosition[2];
edgeVerts[0].xy /= edgeVerts[0].w;
edgeVerts[1].xy /= edgeVerts[1].w;
edgeVerts[2].xy /= edgeVerts[2].w;
emit(0, n0, edgeVerts);
emit(1, n0, edgeVerts);
emit(2, n0, edgeVerts);
#else
emit(0, n0);
emit(1, n0);
emit(2, n0);
#endif
#endif // PRIM_TRI
EndPrimitive();
}
#endif
//--------------------------------------------------------------
// Fragment Shader
//--------------------------------------------------------------
#ifdef FRAGMENT_SHADER
in vec4 gPosition;
in vec3 gNormal;
noperspective in vec4 gEdgeDistance;
out vec4 outColor;
#define NUM_LIGHTS 2
struct LightSource {
vec4 position;
vec4 ambient;
vec4 diffuse;
vec4 specular;
};
layout(std140) uniform Lighting {
LightSource lightSource[NUM_LIGHTS];
};
uniform vec4 diffuseColor = vec4(1);
uniform vec4 ambientColor = vec4(1);
vec4
lighting(vec3 Peye, vec3 Neye)
{
vec4 color = vec4(0);
for (int i = 0; i < NUM_LIGHTS; ++i) {
vec4 Plight = lightSource[i].position;
vec3 l = (Plight.w == 0.0)
? normalize(Plight.xyz) : normalize(Plight.xyz - Peye);
vec3 n = normalize(Neye);
vec3 h = normalize(l + vec3(0,0,1)); // directional viewer
float d = max(0.0, dot(n, l));
float s = pow(max(0.0, dot(n, h)), 500.0f);
color += lightSource[i].ambient * ambientColor
+ d * lightSource[i].diffuse * diffuseColor
+ s * lightSource[i].specular;
}
color.a = 1;
return color;
}
#ifdef PRIM_POINT
uniform vec4 fragColor;
void
main()
{
outColor = fragColor;
}
#endif
vec4
edgeColor(vec4 Cfill, vec4 edgeDistance)
{
#if defined(GEOMETRY_OUT_WIRE) || defined(GEOMETRY_OUT_LINE)
#ifdef PRIM_TRI
float d =
min(gEdgeDistance[0], min(gEdgeDistance[1], gEdgeDistance[2]));
#endif
#ifdef PRIM_QUAD
float d =
min(min(gEdgeDistance[0], gEdgeDistance[1]),
min(gEdgeDistance[2], gEdgeDistance[3]));
#endif
vec4 Cedge = vec4(1.0, 1.0, 0.0, 1.0);
float p = exp2(-2 * d * d);
#if defined(GEOMETRY_OUT_WIRE)
if (p < 0.25) discard;
#endif
Cfill.rgb = mix(Cfill.rgb, Cedge.rgb, p);
#endif
return Cfill;
}
#if defined(PRIM_QUAD) || defined(PRIM_TRI)
void
main()
{
vec3 N = (gl_FrontFacing ? gNormal : -gNormal);
vec4 Cf = lighting(gPosition.xyz, N);
#if defined(GEOMETRY_OUT_WIRE) || defined(GEOMETRY_OUT_LINE)
Cf = edgeColor(Cf, gEdgeDistance);
#endif
outColor = Cf;
}
#endif
#endif