SPIRV-Cross/spirv_cross.cpp

/*
 * Copyright 2015-2016 ARM Limited
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

#include "spirv_cross.hpp"
#include "GLSL.std.450.h"
#include <algorithm>
#include <cstring>
#include <utility>

using namespace std;
using namespace spv;
using namespace spirv_cross;

#define log(...) fprintf(stderr, __VA_ARGS__)

Instruction::Instruction(const vector<uint32_t> &spirv, uint32_t &index)
{
	op = spirv[index] & 0xffff;
	count = (spirv[index] >> 16) & 0xffff;
	offset = index + 1;
	length = count - 1;

	index += count;

	if (index > spirv.size())
		throw CompilerError("SPIR-V instruction goes out of bounds.");
}

Compiler::Compiler(vector<uint32_t> ir)
    : spirv(move(ir))
{
	parse();
}

string Compiler::compile()
{
	return "";
}

bool Compiler::variable_storage_is_aliased(const SPIRVariable &v)
{
	auto &type = get<SPIRType>(v.basetype);
	bool ssbo = (meta[type.self].decoration.decoration_flags & (1ull << DecorationBufferBlock)) != 0;
	bool image = type.basetype == SPIRType::Image;
	bool counter = type.basetype == SPIRType::AtomicCounter;
	return ssbo || image || counter;
}

bool Compiler::block_is_pure(const SPIRBlock &block)
{
	for (auto &i : block.ops)
	{
		auto ops = stream(i);
		auto op = static_cast<Op>(i.op);

		switch (op)
		{
		case OpFunctionCall:
		{
			uint32_t func = ops[2];
			if (!function_is_pure(get<SPIRFunction>(func)))
				return false;
			break;
		}

		case OpStore:
		{
			auto &type = expression_type(ops[0]);
			if (type.storage != StorageClassFunction)
				return false;
			break;
		}

		case OpImageWrite:
			return false;

		// Atomics are impure.
		case OpAtomicLoad:
		case OpAtomicStore:
		case OpAtomicExchange:
		case OpAtomicCompareExchange:
		case OpAtomicIIncrement:
		case OpAtomicIDecrement:
		case OpAtomicIAdd:
		case OpAtomicISub:
		case OpAtomicSMin:
		case OpAtomicUMin:
		case OpAtomicSMax:
		case OpAtomicUMax:
		case OpAtomicAnd:
		case OpAtomicOr:
		case OpAtomicXor:
			return false;

		// Geometry shader builtins modify global state.
		case OpEndPrimitive:
		case OpEmitStreamVertex:
		case OpEndStreamPrimitive:
		case OpEmitVertex:
			return false;

		// Barriers disallow any reordering, so we should treat blocks with barrier as writing.
		case OpControlBarrier:
		case OpMemoryBarrier:
			return false;

		// OpExtInst is potentially impure depending on extension, but GLSL builtins are at least pure.

		default:
			break;
		}
	}

	return true;
}

string Compiler::to_name(uint32_t id, bool allow_alias)
{
	if (allow_alias && ids.at(id).get_type() == TypeType)
	{
		// If this type is a simple alias, emit the
		// name of the original type instead.
		// We don't want to override the meta alias
		// as that can be overridden by the reflection APIs after parse.
		auto &type = get<SPIRType>(id);
		if (type.type_alias)
			return to_name(type.type_alias);
	}

	if (meta[id].decoration.alias.empty())
		return join("_", id);
	else
		return meta.at(id).decoration.alias;
}

bool Compiler::function_is_pure(const SPIRFunction &func)
{
	for (auto block : func.blocks)
	{
		if (!block_is_pure(get<SPIRBlock>(block)))
		{
			//fprintf(stderr, "Function %s is impure!\n", to_name(func.self).c_str());
			return false;
		}
	}

	//fprintf(stderr, "Function %s is pure!\n", to_name(func.self).c_str());
	return true;
}

void Compiler::register_global_read_dependencies(const SPIRBlock &block, uint32_t id)
{
	for (auto &i : block.ops)
	{
		auto ops = stream(i);
		auto op = static_cast<Op>(i.op);

		switch (op)
		{
		case OpFunctionCall:
		{
			uint32_t func = ops[2];
			register_global_read_dependencies(get<SPIRFunction>(func), id);
			break;
		}

		case OpLoad:
		case OpImageRead:
		{
			// If we're in a storage class which does not get invalidated, adding dependencies here is no big deal.
			auto *var = maybe_get_backing_variable(ops[2]);
			if (var && var->storage != StorageClassFunction)
			{
				auto &type = get<SPIRType>(var->basetype);

				// InputTargets are immutable.
				if (type.basetype != SPIRType::Image && type.image.dim != DimSubpassData)
					var->dependees.push_back(id);
			}
			break;
		}

		default:
			break;
		}
	}
}

void Compiler::register_global_read_dependencies(const SPIRFunction &func, uint32_t id)
{
	for (auto block : func.blocks)
		register_global_read_dependencies(get<SPIRBlock>(block), id);
}

SPIRVariable *Compiler::maybe_get_backing_variable(uint32_t chain)
{
	auto *var = maybe_get<SPIRVariable>(chain);
	if (!var)
	{
		auto *cexpr = maybe_get<SPIRExpression>(chain);
		if (cexpr)
			var = maybe_get<SPIRVariable>(cexpr->loaded_from);
	}

	return var;
}

void Compiler::register_read(uint32_t expr, uint32_t chain, bool forwarded)
{
	auto &e = get<SPIRExpression>(expr);
	auto *var = maybe_get_backing_variable(chain);

	if (var)
	{
		e.loaded_from = var->self;

		// If the backing variable is immutable, we do not need to depend on the variable.
		if (forwarded && !is_immutable(var->self))
			var->dependees.push_back(e.self);

		// If we load from a parameter, make sure we create "inout" if we also write to the parameter.
		// The default is "in" however, so we never invalidate our compilation by reading.
		if (var && var->parameter)
			var->parameter->read_count++;
	}
}

void Compiler::register_write(uint32_t chain)
{
	auto *var = maybe_get<SPIRVariable>(chain);
	if (!var)
	{
		// If we're storing through an access chain, invalidate the backing variable instead.
		auto *expr = maybe_get<SPIRExpression>(chain);
		if (expr && expr->loaded_from)
			var = maybe_get<SPIRVariable>(expr->loaded_from);
	}

	if (var)
	{
		// If our variable is in a storage class which can alias with other buffers,
		// invalidate all variables which depend on aliased variables.
		if (variable_storage_is_aliased(*var))
			flush_all_aliased_variables();
		else if (var)
			flush_dependees(*var);

		// We tried to write to a parameter which is not marked with out qualifier, force a recompile.
		if (var->parameter && var->parameter->write_count == 0)
		{
			var->parameter->write_count++;
			force_recompile = true;
		}
	}
}

void Compiler::flush_dependees(SPIRVariable &var)
{
	for (auto expr : var.dependees)
	{
		invalid_expressions.insert(expr);
		get<SPIRExpression>(expr).invalidated_by.push_back(var.self);
	}
	var.dependees.clear();
}

void Compiler::flush_all_aliased_variables()
{
	for (auto aliased : aliased_variables)
		flush_dependees(get<SPIRVariable>(aliased));
}

void Compiler::flush_all_atomic_capable_variables()
{
	for (auto global : global_variables)
		flush_dependees(get<SPIRVariable>(global));
	flush_all_aliased_variables();
}

void Compiler::flush_all_active_variables()
{
	// Invalidate all temporaries we read from variables in this block since they were forwarded.
	// Invalidate all temporaries we read from globals.
	for (auto &v : current_function->local_variables)
		flush_dependees(get<SPIRVariable>(v));
	for (auto &arg : current_function->arguments)
		flush_dependees(get<SPIRVariable>(arg.id));
	for (auto global : global_variables)
		flush_dependees(get<SPIRVariable>(global));

	flush_all_aliased_variables();
}

const SPIRType &Compiler::expression_type(uint32_t id) const
{
	switch (ids[id].get_type())
	{
	case TypeVariable:
		return get<SPIRType>(get<SPIRVariable>(id).basetype);

	case TypeExpression:
		return get<SPIRType>(get<SPIRExpression>(id).expression_type);

	case TypeConstant:
		return get<SPIRType>(get<SPIRConstant>(id).constant_type);

	case TypeUndef:
		return get<SPIRType>(get<SPIRUndef>(id).basetype);

	default:
		throw CompilerError("Cannot resolve expression type.");
	}
}

bool Compiler::expression_is_lvalue(uint32_t id) const
{
	auto &type = expression_type(id);
	switch (type.basetype)
	{
	case SPIRType::SampledImage:
	case SPIRType::Image:
	case SPIRType::Sampler:
		return false;

	default:
		return true;
	}
}

bool Compiler::is_immutable(uint32_t id) const
{
	if (ids[id].get_type() == TypeVariable)
	{
		auto &var = get<SPIRVariable>(id);

		// Anything we load from the UniformConstant address space is guaranteed to be immutable.
		bool pointer_to_const = var.storage == StorageClassUniformConstant;
		return pointer_to_const || var.phi_variable || var.forwardable || !expression_is_lvalue(id);
	}
	else if (ids[id].get_type() == TypeExpression)
		return get<SPIRExpression>(id).immutable;
	else if (ids[id].get_type() == TypeConstant || ids[id].get_type() == TypeUndef)
		return true;
	else
		return false;
}

bool Compiler::is_builtin_variable(const SPIRVariable &var) const
{
	if (var.compat_builtin || meta[var.self].decoration.builtin)
		return true;

	// We can have builtin structs as well. If one member of a struct is builtin, the struct must also be builtin.
	for (auto &m : meta[get<SPIRType>(var.basetype).self].members)
		if (m.builtin)
			return true;

	return false;
}

bool Compiler::is_member_builtin(const SPIRType &type, uint32_t index, BuiltIn *builtin) const
{
	auto &memb = meta[type.self].members;
	if (index < memb.size() && memb[index].builtin)
	{
		if (builtin)
			*builtin = memb[index].builtin_type;
		return true;
	}

	return false;
}

bool Compiler::is_scalar(const SPIRType &type) const
{
	return type.vecsize == 1 && type.columns == 1;
}

bool Compiler::is_vector(const SPIRType &type) const
{
	return type.vecsize > 1 && type.columns == 1;
}

bool Compiler::is_matrix(const SPIRType &type) const
{
	return type.vecsize > 1 && type.columns > 1;
}

ShaderResources Compiler::get_shader_resources() const
{
	ShaderResources res;

	for (auto &id : ids)
	{
		if (id.get_type() != TypeVariable)
			continue;

		auto &var = id.get<SPIRVariable>();
		auto &type = get<SPIRType>(var.basetype);

		if (!type.pointer || is_builtin_variable(var))
			continue;

		// Input
		if (var.storage == StorageClassInput)
		{
			if (meta[type.self].decoration.decoration_flags & (1ull << DecorationBlock))
				res.stage_inputs.push_back({ var.self, type.self, meta[type.self].decoration.alias });
			else
				res.stage_inputs.push_back({ var.self, type.self, meta[var.self].decoration.alias });
		}
		// Subpass inputs
		else if (var.storage == StorageClassUniformConstant && type.image.dim == DimSubpassData)
		{
			res.subpass_inputs.push_back({ var.self, type.self, meta[var.self].decoration.alias });
		}
		// Outputs
		else if (var.storage == StorageClassOutput)
		{
			if (meta[type.self].decoration.decoration_flags & (1ull << DecorationBlock))
				res.stage_outputs.push_back({ var.self, type.self, meta[type.self].decoration.alias });
			else
				res.stage_outputs.push_back({ var.self, type.self, meta[var.self].decoration.alias });
		}
		// UBOs
		else if (type.storage == StorageClassUniform &&
		         (meta[type.self].decoration.decoration_flags & (1ull << DecorationBlock)))
		{
			res.uniform_buffers.push_back({ var.self, type.self, meta[type.self].decoration.alias });
		}
		// SSBOs
		else if (type.storage == StorageClassUniform &&
		         (meta[type.self].decoration.decoration_flags & (1ull << DecorationBufferBlock)))
		{
			res.storage_buffers.push_back({ var.self, type.self, meta[type.self].decoration.alias });
		}
		// Push constant blocks
		else if (type.storage == StorageClassPushConstant)
		{
			// There can only be one push constant block, but keep the vector in case this restriction is lifted
			// in the future.
			res.push_constant_buffers.push_back({ var.self, type.self, meta[var.self].decoration.alias });
		}
		// Images
		else if (type.storage == StorageClassUniformConstant && type.basetype == SPIRType::Image)
		{
			res.storage_images.push_back({ var.self, type.self, meta[var.self].decoration.alias });
		}
		// Textures
		else if (type.storage == StorageClassUniformConstant && type.basetype == SPIRType::SampledImage)
		{
			res.sampled_images.push_back({ var.self, type.self, meta[var.self].decoration.alias });
		}
		// Atomic counters
		else if (type.storage == StorageClassAtomicCounter)
		{
			res.atomic_counters.push_back({ var.self, type.self, meta[var.self].decoration.alias });
		}
	}

	return res;
}

static inline uint32_t swap_endian(uint32_t v)
{
	return ((v >> 24) & 0x000000ffu) | ((v >> 8) & 0x0000ff00u) | ((v << 8) & 0x00ff0000u) | ((v << 24) & 0xff000000u);
}

static string extract_string(const vector<uint32_t> &spirv, uint32_t offset)
{
	string ret;
	for (uint32_t i = offset; i < spirv.size(); i++)
	{
		uint32_t w = spirv[i];

		for (uint32_t j = 0; j < 4; j++, w >>= 8)
		{
			char c = w & 0xff;
			if (c == '\0')
				return ret;
			ret += c;
		}
	}

	throw CompilerError("String was not terminated before EOF");
}

static bool is_valid_spirv_version(uint32_t version)
{
	switch (version)
	{
	// Allow v99 since it tends to just work.
	case 99:
	case 0x10000: // SPIR-V 1.0
	case 0x10100: // SPIR-V 1.1
		return true;

	default:
		return false;
	}
}

void Compiler::parse()
{
	auto len = spirv.size();
	if (len < 5)
		throw CompilerError("SPIRV file too small.");

	auto s = spirv.data();

	// Endian-swap if we need to.
	if (s[0] == swap_endian(MagicNumber))
		transform(begin(spirv), end(spirv), begin(spirv), [](uint32_t c) { return swap_endian(c); });

	if (s[0] != MagicNumber || !is_valid_spirv_version(s[1]))
		throw CompilerError("Invalid SPIRV format.");

	uint32_t bound = s[3];
	ids.resize(bound);
	meta.resize(bound);

	uint32_t offset = 5;
	while (offset < len)
		inst.emplace_back(spirv, offset);

	for (auto &i : inst)
		parse(i);

	if (current_function)
		throw CompilerError("Function was not terminated.");
	if (current_block)
		throw CompilerError("Block was not terminated.");
}

void Compiler::flatten_interface_block(uint32_t id)
{
	auto &var = get<SPIRVariable>(id);
	auto &type = get<SPIRType>(var.basetype);
	auto flags = meta.at(type.self).decoration.decoration_flags;

	if (!type.array.empty())
		throw CompilerError("Type is array of UBOs.");
	if (type.basetype != SPIRType::Struct)
		throw CompilerError("Type is not a struct.");
	if ((flags & (1ull << DecorationBlock)) == 0)
		throw CompilerError("Type is not a block.");
	if (type.member_types.empty())
		throw CompilerError("Member list of struct is empty.");

	uint32_t t = type.member_types[0];
	for (auto &m : type.member_types)
		if (t != m)
			throw CompilerError("Types in block differ.");

	auto &mtype = get<SPIRType>(t);
	if (!mtype.array.empty())
		throw CompilerError("Member type cannot be arrays.");
	if (mtype.basetype == SPIRType::Struct)
		throw CompilerError("Member type cannot be struct.");

	// Inherit variable name from interface block name.
	meta.at(var.self).decoration.alias = meta.at(type.self).decoration.alias;

	auto storage = var.storage;
	if (storage == StorageClassUniform)
		storage = StorageClassUniformConstant;

	// Change type definition in-place into an array instead.
	// Access chains will still work as-is.
	uint32_t array_size = uint32_t(type.member_types.size());
	type = mtype;
	type.array.push_back(array_size);
	type.pointer = true;
	type.storage = storage;
	var.storage = storage;
}

void Compiler::update_name_cache(unordered_set<string> &cache, string &name)
{
	if (name.empty())
		return;

	if (cache.find(name) == end(cache))
	{
		cache.insert(name);
		return;
	}

	uint32_t counter = 0;
	auto tmpname = name;

	// If there is a collision (very rare),
	// keep tacking on extra identifier until it's unique.
	do
	{
		counter++;
		name = tmpname + "_" + convert_to_string(counter);
	} while (cache.find(name) != end(cache));
	cache.insert(name);
}

void Compiler::set_name(uint32_t id, const std::string &name)
{
	auto &str = meta.at(id).decoration.alias;
	str.clear();

	if (name.empty())
		return;
	// Reserved for temporaries.
	if (name[0] == '_')
		return;

	// Functions in glslangValidator are mangled with name(<mangled> stuff.
	// Normally, we would never see '(' in any legal indentifiers, so just strip them out.
	str = name.substr(0, name.find('('));

	for (uint32_t i = 0; i < str.size(); i++)
	{
		auto &c = str[i];

		// _<num> variables are reserved by the internal implementation,
		// otherwise, make sure the name is a valid identifier.
		if (i == 0 || (str[0] == '_' && i == 1))
			c = isalpha(c) ? c : '_';
		else
			c = isalnum(c) ? c : '_';
	}
}

const SPIRType &Compiler::get_type(uint32_t id) const
{
	return get<SPIRType>(id);
}

void Compiler::set_member_decoration(uint32_t id, uint32_t index, Decoration decoration, uint32_t argument)
{
	meta.at(id).members.resize(max(meta[id].members.size(), size_t(index) + 1));
	auto &dec = meta.at(id).members[index];
	dec.decoration_flags |= 1ull << decoration;

	switch (decoration)
	{
	case DecorationBuiltIn:
		dec.builtin = true;
		dec.builtin_type = static_cast<BuiltIn>(argument);
		break;

	case DecorationLocation:
		dec.location = argument;
		break;

	case DecorationOffset:
		dec.offset = argument;
		break;

	default:
		break;
	}
}

void Compiler::set_member_name(uint32_t id, uint32_t index, const std::string &name)
{
	meta.at(id).members.resize(max(meta[id].members.size(), size_t(index) + 1));
	meta.at(id).members[index].alias = name;
}

const std::string &Compiler::get_member_name(uint32_t id, uint32_t index) const
{
	auto &m = meta.at(id);
	if (index >= m.members.size())
	{
		static string empty;
		return empty;
	}

	return m.members[index].alias;
}

uint32_t Compiler::get_member_decoration(uint32_t id, uint32_t index, Decoration decoration) const
{
	auto &dec = meta.at(id).members.at(index);
	if (!(dec.decoration_flags & (1ull << decoration)))
		return 0;

	switch (decoration)
	{
	case DecorationBuiltIn:
		return dec.builtin_type;
	case DecorationLocation:
		return dec.location;
	case DecorationOffset:
		return dec.offset;
	default:
		return 0;
	}
}

uint64_t Compiler::get_member_decoration_mask(uint32_t id, uint32_t index) const
{
	auto &m = meta.at(id);
	if (index >= m.members.size())
		return 0;

	return m.members[index].decoration_flags;
}

void Compiler::unset_member_decoration(uint32_t id, uint32_t index, Decoration decoration)
{
	auto &m = meta.at(id);
	if (index >= m.members.size())
		return;

	auto &dec = m.members[index];

	dec.decoration_flags &= ~(1ull << decoration);
	switch (decoration)
	{
	case DecorationBuiltIn:
		dec.builtin = false;
		break;

	case DecorationLocation:
		dec.location = 0;
		break;

	case DecorationOffset:
		dec.offset = 0;
		break;

	default:
		break;
	}
}

void Compiler::set_decoration(uint32_t id, Decoration decoration, uint32_t argument)
{
	auto &dec = meta.at(id).decoration;
	dec.decoration_flags |= 1ull << decoration;

	switch (decoration)
	{
	case DecorationBuiltIn:
		dec.builtin = true;
		dec.builtin_type = static_cast<BuiltIn>(argument);
		break;

	case DecorationLocation:
		dec.location = argument;
		break;

	case DecorationOffset:
		dec.offset = argument;
		break;

	case DecorationArrayStride:
		dec.array_stride = argument;
		break;

	case DecorationBinding:
		dec.binding = argument;
		break;

	case DecorationDescriptorSet:
		dec.set = argument;
		break;

	case DecorationInputAttachmentIndex:
		dec.input_attachment = argument;
		break;

	default:
		break;
	}
}

StorageClass Compiler::get_storage_class(uint32_t id) const
{
	return get<SPIRVariable>(id).storage;
}

const std::string &Compiler::get_name(uint32_t id) const
{
	return meta.at(id).decoration.alias;
}

uint64_t Compiler::get_decoration_mask(uint32_t id) const
{
	auto &dec = meta.at(id).decoration;
	return dec.decoration_flags;
}

uint32_t Compiler::get_decoration(uint32_t id, Decoration decoration) const
{
	auto &dec = meta.at(id).decoration;
	if (!(dec.decoration_flags & (1ull << decoration)))
		return 0;

	switch (decoration)
	{
	case DecorationBuiltIn:
		return dec.builtin_type;
	case DecorationLocation:
		return dec.location;
	case DecorationOffset:
		return dec.offset;
	case DecorationBinding:
		return dec.binding;
	case DecorationDescriptorSet:
		return dec.set;
	case DecorationInputAttachmentIndex:
		return dec.input_attachment;
	default:
		return 0;
	}
}

void Compiler::unset_decoration(uint32_t id, Decoration decoration)
{
	auto &dec = meta.at(id).decoration;
	dec.decoration_flags &= ~(1ull << decoration);
	switch (decoration)
	{
	case DecorationBuiltIn:
		dec.builtin = false;
		break;

	case DecorationLocation:
		dec.location = 0;
		break;

	case DecorationOffset:
		dec.offset = 0;
		break;

	case DecorationBinding:
		dec.binding = 0;
		break;

	case DecorationDescriptorSet:
		dec.set = 0;
		break;

	default:
		break;
	}
}

void Compiler::parse(const Instruction &instruction)
{
	auto ops = stream(instruction);
	auto op = static_cast<Op>(instruction.op);
	uint32_t length = instruction.length;

	switch (op)
	{
	case OpMemoryModel:
	case OpSourceExtension:
	case OpNop:
		break;

	case OpSource:
	{
		auto lang = static_cast<SourceLanguage>(ops[0]);
		switch (lang)
		{
		case SourceLanguageESSL:
			source.es = true;
			source.version = ops[1];
			source.known = true;
			break;

		case SourceLanguageGLSL:
			source.es = false;
			source.version = ops[1];
			source.known = true;
			break;

		default:
			source.known = false;
			break;
		}
		break;
	}

	case OpUndef:
	{
		uint32_t result_type = ops[0];
		uint32_t id = ops[1];
		set<SPIRUndef>(id, result_type);
		break;
	}

	case OpCapability:
	{
		uint32_t cap = ops[0];
		if (cap == CapabilityKernel)
			throw CompilerError("Kernel capability not supported.");
		break;
	}

	case OpExtInstImport:
	{
		uint32_t id = ops[0];
		auto ext = extract_string(spirv, instruction.offset + 1);
		if (ext == "GLSL.std.450")
			set<SPIRExtension>(id, SPIRExtension::GLSL);
		else
			throw CompilerError("Only GLSL.std.450 extension interface supported.");

		break;
	}

	case OpEntryPoint:
	{
		if (execution.entry_point)
			throw CompilerError("More than one entry point not supported.");

		execution.model = static_cast<ExecutionModel>(ops[0]);
		execution.entry_point = ops[1];
		break;
	}

	case OpExecutionMode:
	{
		uint32_t entry = ops[0];
		if (entry != execution.entry_point)
			throw CompilerError("Cannot set execution mode to non-existing entry point.");

		auto mode = static_cast<ExecutionMode>(ops[1]);
		execution.flags |= 1ull << mode;

		switch (mode)
		{
		case ExecutionModeInvocations:
			execution.invocations = ops[2];
			break;

		case ExecutionModeLocalSize:
			execution.workgroup_size.x = ops[2];
			execution.workgroup_size.y = ops[3];
			execution.workgroup_size.z = ops[4];
			break;

		case ExecutionModeOutputVertices:
			execution.output_vertices = ops[2];
			break;

		default:
			break;
		}
		break;
	}

	case OpName:
	{
		uint32_t id = ops[0];
		set_name(id, extract_string(spirv, instruction.offset + 1));
		break;
	}

	case OpMemberName:
	{
		uint32_t id = ops[0];
		uint32_t member = ops[1];
		set_member_name(id, member, extract_string(spirv, instruction.offset + 2));
		break;
	}

	case OpDecorate:
	{
		uint32_t id = ops[0];

		auto decoration = static_cast<Decoration>(ops[1]);
		if (length >= 3)
			set_decoration(id, decoration, ops[2]);
		else
			set_decoration(id, decoration);
		break;
	}

	case OpMemberDecorate:
	{
		uint32_t id = ops[0];
		uint32_t member = ops[1];
		auto decoration = static_cast<Decoration>(ops[2]);
		if (length >= 4)
			set_member_decoration(id, member, decoration, ops[3]);
		else
			set_member_decoration(id, member, decoration);
		break;
	}

	// Build up basic types.
	case OpTypeVoid:
	{
		uint32_t id = ops[0];
		auto &type = set<SPIRType>(id);
		type.basetype = SPIRType::Void;
		break;
	}

	case OpTypeBool:
	{
		uint32_t id = ops[0];
		auto &type = set<SPIRType>(id);
		type.basetype = SPIRType::Bool;
		type.width = 1;
		break;
	}

	case OpTypeFloat:
	{
		uint32_t id = ops[0];
		uint32_t width = ops[1];
		auto &type = set<SPIRType>(id);
		type.basetype = SPIRType::Float;
		type.width = width;
		break;
	}

	case OpTypeInt:
	{
		uint32_t id = ops[0];
		uint32_t width = ops[1];
		auto &type = set<SPIRType>(id);
		type.basetype = ops[2] ? SPIRType::Int : SPIRType::UInt;
		type.width = width;
		break;
	}

	// Build composite types by "inheriting".
	// NOTE: The self member is also copied! For pointers and array modifiers this is a good thing
	// since we can refer to decorations on pointee classes which is needed for UBO/SSBO, I/O blocks in geometry/tess etc.
	case OpTypeVector:
	{
		uint32_t id = ops[0];
		uint32_t vecsize = ops[2];

		auto &base = get<SPIRType>(ops[1]);
		auto &vecbase = set<SPIRType>(id);

		vecbase = base;
		vecbase.vecsize = vecsize;
		vecbase.self = id;
		break;
	}

	case OpTypeMatrix:
	{
		uint32_t id = ops[0];
		uint32_t colcount = ops[2];

		auto &base = get<SPIRType>(ops[1]);
		auto &matrixbase = set<SPIRType>(id);

		matrixbase = base;
		matrixbase.columns = colcount;
		matrixbase.self = id;
		break;
	}

	case OpTypeArray:
	{
		uint32_t id = ops[0];

		auto &base = get<SPIRType>(ops[1]);
		auto &arraybase = set<SPIRType>(id);

		arraybase = base;
		arraybase.array.push_back(get<SPIRConstant>(ops[2]).scalar());
		// Do NOT set arraybase.self!
		break;
	}

	case OpTypeRuntimeArray:
	{
		uint32_t id = ops[0];

		auto &base = get<SPIRType>(ops[1]);
		auto &arraybase = set<SPIRType>(id);

		arraybase = base;
		arraybase.array.push_back(0);
		// Do NOT set arraybase.self!
		break;
	}

	case OpTypeImage:
	{
		uint32_t id = ops[0];
		auto &type = set<SPIRType>(id);
		type.basetype = SPIRType::Image;
		type.image.type = ops[1];
		type.image.dim = static_cast<Dim>(ops[2]);
		type.image.depth = ops[3] != 0;
		type.image.arrayed = ops[4] != 0;
		type.image.ms = ops[5] != 0;
		type.image.sampled = ops[6];
		type.image.format = static_cast<ImageFormat>(ops[7]);
		break;
	}

	case OpTypeSampledImage:
	{
		uint32_t id = ops[0];
		uint32_t imagetype = ops[1];
		auto &type = set<SPIRType>(id);
		type = get<SPIRType>(imagetype);
		type.basetype = SPIRType::SampledImage;
		type.self = id;
		break;
	}

	// Not really used.
	case OpTypeSampler:
	{
		uint32_t id = ops[0];
		auto &type = set<SPIRType>(id);
		type.basetype = SPIRType::Sampler;
		break;
	}

	case OpTypePointer:
	{
		uint32_t id = ops[0];

		auto &base = get<SPIRType>(ops[2]);
		auto &ptrbase = set<SPIRType>(id);

		ptrbase = base;
		if (ptrbase.pointer)
			throw CompilerError("Cannot make pointer-to-pointer type.");
		ptrbase.pointer = true;
		ptrbase.storage = static_cast<StorageClass>(ops[1]);

		if (ptrbase.storage == StorageClassAtomicCounter)
			ptrbase.basetype = SPIRType::AtomicCounter;

		// Do NOT set ptrbase.self!
		break;
	}

	case OpTypeStruct:
	{
		uint32_t id = ops[0];
		auto &type = set<SPIRType>(id);
		type.basetype = SPIRType::Struct;
		for (uint32_t i = 1; i < length; i++)
			type.member_types.push_back(ops[i]);

		// Check if we have seen this struct type before, with just different
		// decorations.
		for (auto &other : global_struct_cache)
		{
			if (types_are_logically_equivalent(type, get<SPIRType>(other)))
			{
				type.type_alias = other;
				break;
			}
		}

		if (type.type_alias == 0)
			global_struct_cache.push_back(id);
		break;
	}

	case OpTypeFunction:
	{
		uint32_t id = ops[0];
		uint32_t ret = ops[1];

		auto &func = set<SPIRFunctionPrototype>(id, ret);
		for (uint32_t i = 2; i < length; i++)
			func.parameter_types.push_back(ops[i]);
		break;
	}

	// Variable declaration
	// All variables are essentially pointers with a storage qualifier.
	case OpVariable:
	{
		uint32_t type = ops[0];
		uint32_t id = ops[1];
		auto storage = static_cast<StorageClass>(ops[2]);
		uint32_t initializer = length == 4 ? ops[3] : 0;

		if (storage == StorageClassFunction)
		{
			if (!current_function)
				throw CompilerError("No function currently in scope");
			current_function->add_local_variable(id);
		}
		else if (storage == StorageClassPrivate || storage == StorageClassWorkgroup || storage == StorageClassOutput)
		{
			global_variables.push_back(id);
		}

		auto &var = set<SPIRVariable>(id, type, storage, initializer);

		if (variable_storage_is_aliased(var))
			aliased_variables.push_back(var.self);

		// glslangValidator does not emit required qualifiers here.
		// Solve this by making the image access as restricted as possible
		// and loosen up if we need to.
		auto &vartype = expression_type(id);
		if (vartype.basetype == SPIRType::Image)
		{
			auto &flags = meta.at(id).decoration.decoration_flags;
			flags |= 1ull << DecorationNonWritable;
			flags |= 1ull << DecorationNonReadable;
		}

		break;
	}

	// OpPhi
	// OpPhi is a fairly magical opcode.
	// It selects temporary variables based on which parent block we *came from*.
	// In high-level languages we can "de-SSA" by creating a function local, and flush out temporaries to this function-local
	// variable to emulate SSA Phi.
	case OpPhi:
	{
		if (!current_function)
			throw CompilerError("No function currently in scope");
		if (!current_block)
			throw CompilerError("No block currently in scope");

		uint32_t result_type = ops[0];
		uint32_t id = ops[1];

		// Instead of a temporary, create a new function-wide temporary with this ID instead.
		auto &var = set<SPIRVariable>(id, result_type, spv::StorageClassFunction);
		var.phi_variable = true;

		current_function->add_local_variable(id);

		for (uint32_t i = 2; i + 2 <= length; i += 2)
			current_block->phi_variables.push_back({ ops[i], ops[i + 1], id });
		break;
	}

	// Constants
	case OpSpecConstant:
	case OpConstant:
	{
		uint32_t id = ops[1];
		set<SPIRConstant>(id, ops[0], ops[2]).specialization = op == OpSpecConstant;
		break;
	}

	case OpSpecConstantFalse:
	case OpConstantFalse:
	{
		uint32_t id = ops[1];
		set<SPIRConstant>(id, ops[0], 0).specialization = op == OpSpecConstantFalse;
		break;
	}

	case OpSpecConstantTrue:
	case OpConstantTrue:
	{
		uint32_t id = ops[1];
		set<SPIRConstant>(id, ops[0], 1).specialization = op == OpSpecConstantTrue;
		break;
	}

	case OpSpecConstantComposite:
	case OpConstantComposite:
	{
		uint32_t id = ops[1];
		uint32_t type = ops[0];

		auto &ctype = get<SPIRType>(type);
		SPIRConstant *constant = nullptr;

		// We can have constants which are structs and arrays.
		// In this case, our SPIRConstant will be a list of other SPIRConstant ids which we
		// can refer to.
		if (ctype.basetype == SPIRType::Struct || !ctype.array.empty())
		{
			constant = &set<SPIRConstant>(id, type, ops + 2, length - 2);
			constant->specialization = op == OpSpecConstantComposite;
			break;
		}

		bool matrix = ctype.columns > 1;

		if (matrix)
		{
			switch (length - 2)
			{
			case 1:
				constant = &set<SPIRConstant>(id, type, get<SPIRConstant>(ops[2]).vector());
				break;

			case 2:
				constant = &set<SPIRConstant>(id, type, get<SPIRConstant>(ops[2]).vector(),
				                              get<SPIRConstant>(ops[3]).vector());
				break;

			case 3:
				constant = &set<SPIRConstant>(id, type, get<SPIRConstant>(ops[2]).vector(),
				                              get<SPIRConstant>(ops[3]).vector(), get<SPIRConstant>(ops[4]).vector());
				break;

			case 4:
				constant =
				    &set<SPIRConstant>(id, type, get<SPIRConstant>(ops[2]).vector(), get<SPIRConstant>(ops[3]).vector(),
				                       get<SPIRConstant>(ops[4]).vector(), get<SPIRConstant>(ops[5]).vector());
				break;

			default:
				throw CompilerError("OpConstantComposite only supports 1, 2, 3 and 4 columns.");
			}
		}
		else
		{
			switch (length - 2)
			{
			case 1:
				constant = &set<SPIRConstant>(id, type, get<SPIRConstant>(ops[2]).scalar());
				break;

			case 2:
				constant = &set<SPIRConstant>(id, type, get<SPIRConstant>(ops[2]).scalar(),
				                              get<SPIRConstant>(ops[3]).scalar());
				break;

			case 3:
				constant = &set<SPIRConstant>(id, type, get<SPIRConstant>(ops[2]).scalar(),
				                              get<SPIRConstant>(ops[3]).scalar(), get<SPIRConstant>(ops[4]).scalar());
				break;

			case 4:
				constant =
				    &set<SPIRConstant>(id, type, get<SPIRConstant>(ops[2]).scalar(), get<SPIRConstant>(ops[3]).scalar(),
				                       get<SPIRConstant>(ops[4]).scalar(), get<SPIRConstant>(ops[5]).scalar());
				break;

			default:
				throw CompilerError("OpConstantComposite only supports 1, 2, 3 and 4 components.");
			}
		}

		constant->specialization = op == OpSpecConstantComposite;
		break;
	}

	// Functions
	case OpFunction:
	{
		uint32_t res = ops[0];
		uint32_t id = ops[1];
		// Control
		uint32_t type = ops[3];

		if (current_function)
			throw CompilerError("Must end a function before starting a new one!");

		current_function = &set<SPIRFunction>(id, res, type);
		break;
	}

	case OpFunctionParameter:
	{
		uint32_t type = ops[0];
		uint32_t id = ops[1];

		if (!current_function)
			throw CompilerError("Must be in a function!");

		current_function->add_parameter(type, id);
		set<SPIRVariable>(id, type, StorageClassFunction);
		break;
	}

	case OpFunctionEnd:
	{
		current_function = nullptr;
		break;
	}

	// Blocks
	case OpLabel:
	{
		// OpLabel always starts a block.
		if (!current_function)
			throw CompilerError("Blocks cannot exist outside functions!");

		uint32_t id = ops[0];

		current_function->blocks.push_back(id);
		if (!current_function->entry_block)
			current_function->entry_block = id;

		if (current_block)
			throw CompilerError("Cannot start a block before ending the current block.");

		current_block = &set<SPIRBlock>(id);
		break;
	}

	// Branch instructions end blocks.
	case OpBranch:
	{
		if (!current_block)
			throw CompilerError("Trying to end a non-existing block.");

		uint32_t target = ops[0];
		current_block->terminator = SPIRBlock::Direct;
		current_block->next_block = target;
		current_block = nullptr;
		break;
	}

	case OpBranchConditional:
	{
		if (!current_block)
			throw CompilerError("Trying to end a non-existing block.");

		current_block->condition = ops[0];
		current_block->true_block = ops[1];
		current_block->false_block = ops[2];

		current_block->terminator = SPIRBlock::Select;
		current_block = nullptr;
		break;
	}

	case OpSwitch:
	{
		if (!current_block)
			throw CompilerError("Trying to end a non-existing block.");

		if (current_block->merge == SPIRBlock::MergeNone)
			throw CompilerError("Switch statement is not structured");

		current_block->terminator = SPIRBlock::MultiSelect;

		current_block->condition = ops[0];
		current_block->default_block = ops[1];

		for (uint32_t i = 2; i + 2 <= length; i += 2)
			current_block->cases.push_back({ ops[i], ops[i + 1] });

		// If we jump to next block, make it break instead since we're inside a switch case block at that point.
		multiselect_merge_targets.insert(current_block->next_block);

		current_block = nullptr;
		break;
	}

	case OpKill:
	{
		if (!current_block)
			throw CompilerError("Trying to end a non-existing block.");
		current_block->terminator = SPIRBlock::Kill;
		current_block = nullptr;
		break;
	}

	case OpReturn:
	{
		if (!current_block)
			throw CompilerError("Trying to end a non-existing block.");
		current_block->terminator = SPIRBlock::Return;
		current_block = nullptr;
		break;
	}

	case OpReturnValue:
	{
		if (!current_block)
			throw CompilerError("Trying to end a non-existing block.");
		current_block->terminator = SPIRBlock::Return;
		current_block->return_value = ops[0];
		current_block = nullptr;
		break;
	}

	case OpUnreachable:
	{
		if (!current_block)
			throw CompilerError("Trying to end a non-existing block.");
		current_block->terminator = SPIRBlock::Unreachable;
		current_block = nullptr;
		break;
	}

	case OpSelectionMerge:
	{
		if (!current_block)
			throw CompilerError("Trying to modify a non-existing block.");

		current_block->next_block = ops[0];
		current_block->merge = SPIRBlock::MergeSelection;
		selection_merge_targets.insert(current_block->next_block);
		break;
	}

	case OpLoopMerge:
	{
		if (!current_block)
			throw CompilerError("Trying to modify a non-existing block.");

		current_block->merge_block = ops[0];
		current_block->continue_block = ops[1];
		current_block->merge = SPIRBlock::MergeLoop;

		loop_blocks.insert(current_block->self);
		loop_merge_targets.insert(current_block->merge_block);

		// Don't add loop headers to continue blocks,
		// which would make it impossible branch into the loop header since
		// they are treated as continues.
		if (current_block->continue_block != current_block->self)
			continue_blocks.insert(current_block->continue_block);
		break;
	}

	// Actual opcodes.
	default:
	{
		if (!current_block)
			throw CompilerError("Currently no block to insert opcode.");

		current_block->ops.push_back(instruction);
		break;
	}
	}
}

bool Compiler::block_is_loop_candidate(const SPIRBlock &block, SPIRBlock::Method method) const
{
	// Tried and failed.
	if (block.disable_block_optimization || block.complex_continue)
		return false;

	if (method == SPIRBlock::MergeToSelectForLoop)
	{
		// Try to detect common for loop pattern
		// which the code backend can use to create cleaner code.
		// for(;;) { if (cond) { some_body; } else { break; } }
		// is the pattern we're looking for.
		bool ret = block.terminator == SPIRBlock::Select && block.merge == SPIRBlock::MergeLoop &&
		           block.true_block != block.merge_block && block.true_block != block.self &&
		           block.false_block == block.merge_block;

		// If we have OpPhi which depends on branches which came from our own block,
		// we need to flush phi variables in else block instead of a trivial break,
		// so we cannot assume this is a for loop candidate.
		if (ret)
		{
			for (auto &phi : block.phi_variables)
				if (phi.parent == block.self)
					return false;

			auto *merge = maybe_get<SPIRBlock>(block.merge_block);
			if (merge)
				for (auto &phi : merge->phi_variables)
					if (phi.parent == block.self)
						return false;
		}
		return ret;
	}
	else if (method == SPIRBlock::MergeToDirectForLoop)
	{
		// Empty loop header that just sets up merge target
		// and branches to loop body.
		bool ret = block.terminator == SPIRBlock::Direct && block.merge == SPIRBlock::MergeLoop && block.ops.empty();

		if (!ret)
			return false;

		auto &child = get<SPIRBlock>(block.next_block);
		ret = child.terminator == SPIRBlock::Select && child.merge == SPIRBlock::MergeNone &&
		      child.false_block == block.merge_block && child.true_block != block.merge_block &&
		      child.true_block != block.self;

		// If we have OpPhi which depends on branches which came from our own block,
		// we need to flush phi variables in else block instead of a trivial break,
		// so we cannot assume this is a for loop candidate.
		if (ret)
		{
			for (auto &phi : block.phi_variables)
				if (phi.parent == block.self || phi.parent == child.self)
					return false;

			for (auto &phi : child.phi_variables)
				if (phi.parent == block.self)
					return false;

			auto *merge = maybe_get<SPIRBlock>(block.merge_block);
			if (merge)
				for (auto &phi : merge->phi_variables)
					if (phi.parent == block.self || phi.parent == child.false_block)
						return false;
		}

		return ret;
	}
	else
		return false;
}

bool Compiler::block_is_outside_flow_control_from_block(const SPIRBlock &from, const SPIRBlock &to)
{
	auto *start = &from;

	if (start->self == to.self)
		return true;

	// Break cycles.
	if (is_continue(start->self))
		return false;

	// If our select block doesn't merge, we must break or continue in these blocks,
	// so if continues occur branchless within these blocks, consider them branchless as well.
	// This is typically used for loop control.
	if (start->terminator == SPIRBlock::Select && start->merge == SPIRBlock::MergeNone &&
	    (block_is_outside_flow_control_from_block(get<SPIRBlock>(start->true_block), to) ||
	     block_is_outside_flow_control_from_block(get<SPIRBlock>(start->false_block), to)))
	{
		return true;
	}
	else if (start->merge_block && block_is_outside_flow_control_from_block(get<SPIRBlock>(start->merge_block), to))
	{
		return true;
	}
	else if (start->next_block && block_is_outside_flow_control_from_block(get<SPIRBlock>(start->next_block), to))
	{
		return true;
	}
	else
		return false;
}

bool Compiler::execution_is_noop(const SPIRBlock &from, const SPIRBlock &to) const
{
	if (!execution_is_branchless(from, to))
		return false;

	auto *start = &from;
	for (;;)
	{
		if (start->self == to.self)
			return true;

		if (!start->ops.empty())
			return false;

		start = &get<SPIRBlock>(start->next_block);
	}
}

bool Compiler::execution_is_branchless(const SPIRBlock &from, const SPIRBlock &to) const
{
	auto *start = &from;
	for (;;)
	{
		if (start->self == to.self)
			return true;

		if (start->terminator == SPIRBlock::Direct && start->merge == SPIRBlock::MergeNone)
			start = &get<SPIRBlock>(start->next_block);
		else
			return false;
	}
}

SPIRBlock::ContinueBlockType Compiler::continue_block_type(const SPIRBlock &block) const
{
	// The block was deemed too complex during code emit, pick conservative fallback paths.
	if (block.complex_continue)
		return SPIRBlock::ComplexLoop;

	// In older glslang output continue block can be equal to the loop header.
	// In this case, execution is clearly branchless, so just assume a while loop header here.
	if (block.merge == SPIRBlock::MergeLoop)
		return SPIRBlock::WhileLoop;

	auto &dominator = get<SPIRBlock>(block.loop_dominator);

	if (execution_is_noop(block, dominator))
		return SPIRBlock::WhileLoop;
	else if (execution_is_branchless(block, dominator))
		return SPIRBlock::ForLoop;
	else
	{
		if (block.merge == SPIRBlock::MergeNone && block.terminator == SPIRBlock::Select &&
		    block.true_block == dominator.self && block.false_block == dominator.merge_block)
		{
			return SPIRBlock::DoWhileLoop;
		}
		else
			return SPIRBlock::ComplexLoop;
	}
}

bool Compiler::traverse_all_reachable_opcodes(const SPIRBlock &block, OpcodeHandler &handler) const
{
	// Ideally, perhaps traverse the CFG instead of all blocks in order to eliminate dead blocks,
	// but this shouldn't be a problem in practice unless the SPIR-V is doing insane things like recursing
	// inside dead blocks ...
	for (auto &i : block.ops)
	{
		auto ops = stream(i);
		auto op = static_cast<Op>(i.op);

		if (!handler.handle(op, ops, i.length))
			return false;

		uint32_t func = ops[2];
		if (op == OpFunctionCall && !traverse_all_reachable_opcodes(get<SPIRFunction>(func), handler))
			return false;
	}

	return true;
}

bool Compiler::traverse_all_reachable_opcodes(const SPIRFunction &func, OpcodeHandler &handler) const
{
	for (auto block : func.blocks)
		if (!traverse_all_reachable_opcodes(get<SPIRBlock>(block), handler))
			return false;

	return true;
}

uint32_t Compiler::type_struct_member_offset(const SPIRType &type, uint32_t index) const
{
	// Decoration must be set in valid SPIR-V, otherwise throw.
	auto &dec = meta[type.self].members.at(index);
	if (dec.decoration_flags & (1ull << DecorationOffset))
		return dec.offset;
	else
		throw CompilerError("Struct member does not have Offset set.");
}

uint32_t Compiler::type_struct_member_array_stride(const SPIRType &type, uint32_t index) const
{
	// Decoration must be set in valid SPIR-V, otherwise throw.
	// ArrayStride is part of the array type not OpMemberDecorate.
	auto &dec = meta[type.member_types[index]].decoration;
	if (dec.decoration_flags & (1ull << DecorationArrayStride))
		return dec.array_stride;
	else
		throw CompilerError("Struct member does not have ArrayStride set.");
}

size_t Compiler::get_declared_struct_size(const SPIRType &type) const
{
	uint32_t last = uint32_t(type.member_types.size() - 1);
	size_t offset = type_struct_member_offset(type, last);
	size_t size = get_declared_struct_member_size(type, last);
	return offset + size;
}

size_t Compiler::get_declared_struct_member_size(const SPIRType &struct_type, uint32_t index) const
{
	auto flags = get_member_decoration_mask(struct_type.self, index);
	auto &type = get<SPIRType>(struct_type.member_types[index]);

	if (type.basetype != SPIRType::Struct)
	{
		switch (type.basetype)
		{
		case SPIRType::Unknown:
		case SPIRType::Void:
		case SPIRType::Bool: // Bools are purely logical, and cannot be used for externally visible types.
		case SPIRType::AtomicCounter:
		case SPIRType::Image:
		case SPIRType::SampledImage:
		case SPIRType::Sampler:
			throw CompilerError("Querying size for object with opaque size.\n");

		default:
			break;
		}

		size_t component_size = type.width / 8;
		unsigned vecsize = type.vecsize;
		unsigned columns = type.columns;

		if (type.array.empty())
		{
			// Vectors.
			if (columns == 1)
				return vecsize * component_size;
			else
			{
				// Per SPIR-V spec, matrices must be tightly packed and aligned up for vec3 accesses.
				if ((flags & (1ull << DecorationRowMajor)) && columns == 3)
					columns = 4;
				else if ((flags & (1ull << DecorationColMajor)) && vecsize == 3)
					vecsize = 4;

				return vecsize * columns * component_size;
			}
		}
		else
		{
			// For arrays, we can use ArrayStride to get an easy check.
			return type_struct_member_array_stride(struct_type, index) * type.array.back();
		}
	}
	else
	{
		// Recurse.
		uint32_t last = uint32_t(struct_type.member_types.size() - 1);
		uint32_t offset = type_struct_member_offset(struct_type, last);
		size_t size = get_declared_struct_size(get<SPIRType>(struct_type.member_types.back()));
		return offset + size;
	}
}

bool Compiler::BufferAccessHandler::handle(Op opcode, const uint32_t *args, uint32_t length)
{
	if (opcode != OpAccessChain && opcode != OpInBoundsAccessChain)
		return true;

	// Invalid SPIR-V.
	if (length < 4)
		return false;

	if (args[2] != id)
		return true;

	// Don't bother traversing the entire access chain tree yet.
	// If we access a struct member, assume we access the entire member.
	uint32_t index = compiler.get<SPIRConstant>(args[3]).scalar();

	// Seen this index already.
	if (seen.find(index) != end(seen))
		return true;
	seen.insert(index);

	auto &type = compiler.expression_type(id);
	uint32_t offset = compiler.type_struct_member_offset(type, index);

	size_t range;
	// If we have another member in the struct, deduce the range by looking at the next member.
	// This is okay since structs in SPIR-V can have padding, but Offset decoration must be
	// monotonically increasing.
	// Of course, this doesn't take into account if the SPIR-V for some reason decided to add
	// very large amounts of padding, but that's not really a big deal.
	if (index + 1 < type.member_types.size())
	{
		range = compiler.type_struct_member_offset(type, index + 1) - offset;
	}
	else
	{
		// No padding, so just deduce it from the size of the member directly.
		range = compiler.get_declared_struct_member_size(type, index);
	}

	ranges.push_back({ index, offset, range });
	return true;
}

std::vector<BufferRange> Compiler::get_active_buffer_ranges(uint32_t id) const
{
	std::vector<BufferRange> ranges;
	BufferAccessHandler handler(*this, ranges, id);
	traverse_all_reachable_opcodes(get<SPIRFunction>(execution.entry_point), handler);
	return ranges;
}

// Increase the number of IDs by the specified incremental amount.
// Returns the value of the first ID available for use in the expanded bound.
uint32_t Compiler::increase_bound_by(uint32_t incr_amount)
{
	uint32_t curr_bound = (uint32_t)ids.size();
	uint32_t new_bound = curr_bound + incr_amount;
	ids.resize(new_bound);
	meta.resize(new_bound);
	return curr_bound;
}

bool Compiler::types_are_logically_equivalent(const SPIRType &a, const SPIRType &b) const
{
	if (a.basetype != b.basetype)
		return false;
	if (a.width != b.width)
		return false;
	if (a.vecsize != b.vecsize)
		return false;
	if (a.columns != b.columns)
		return false;
	if (a.array.size() != b.array.size())
		return false;

	unsigned array_count = a.array.size();
	if (array_count && memcmp(a.array.data(), b.array.data(), array_count * sizeof(uint32_t)) != 0)
		return false;

	if (a.basetype == SPIRType::Image || a.basetype == SPIRType::SampledImage)
	{
		if (memcmp(&a.image, &b.image, sizeof(SPIRType::Image)) != 0)
			return false;
	}

	if (a.member_types.size() != b.member_types.size())
		return false;

	unsigned member_types = a.member_types.size();
	for (unsigned i = 0; i < member_types; i++)
	{
		if (!types_are_logically_equivalent(get<SPIRType>(a.member_types[i]), get<SPIRType>(b.member_types[i])))
			return false;
	}

	return true;
}