In Metal, the `[[position]]` input to a fragment shader remains at
fragment center, even at sample rate, like OpenGL and Direct3D. In
Vulkan, however, when the fragment shader runs at sample rate, the
`FragCoord` builtin moves to the sample position in the framebuffer,
instead of the fragment center. To account for this difference, adjust
the `FragCoord`, if present, by the sample position. The -0.5 offset is
because the fragment center is at (0.5, 0.5).
Also, add an option to force sample-rate shading in a fragment shader.
Since Metal has no explicit control for this, this is done by adding a
dummy `[[sample_id]]` which is otherwise unused, if none is already
present. This is intended to be used from e.g. MoltenVK when a
pipeline's `minSampleShading` value is nonzero.
Instead of checking if any `Input` variables have `Sample`
interpolation, I've elected to check that the `SampleRateShading`
capability is present. Since `SampleId`, `SamplePosition`, and the
`Sample` interpolation decoration require this cap, this should be
equivalent for any valid SPIR-V module. If this isn't acceptable, let me
know.
Add support for declaring a fixed subgroup size. Metal, like Vulkan with
`VK_EXT_subgroup_size_control`, allows the thread execution width to
vary depending on factors such as register usage. Unfortunately, this
breaks several tests that depend on the subgroup size being what the
device says it is. So we'll fix the subgroup size at the size the device
declares. The extra invocations in the subgroup will appear to be
inactive. Because of this, the ballot mask builtins are now ANDed with
the active subgroup mask.
Add support for emulating a subgroup of size 1. This is intended to be
used by Vulkan Portability implementations (e.g. MoltenVK) when the
hardware/software combo provides insufficient support for subgroups.
Luckily for us, Vulkan 1.1 only requires that the subgroup size be at
least 1.
Add support for quadgroup and SIMD-group functions which were added to
iOS in Metal 2.2 and 2.3. This will allow clients to take advantage of
expanded quadgroup and SIMD-group support in recent Metal versions and
on recent Apple GPUs (families 6 and 7).
Gut emulation of subgroup builtins in fragment shaders. It turns out
codegen for the SIMD-group functions in fragment wasn't implemented for
AMD on Mojave; it's a safe bet that it wasn't implemented for the other
drivers either. Subgroup support in fragment shaders now requires Metal
2.2.
Fix reversed coordinates: `y` should be used to calculate the row
address. Align row address to the row stride.
I've made the row alignment a function constant; this makes it possible
to override it at pipeline compile time.
Honestly, I don't know how this worked at all for Epic. It definitely
didn't work in the CTS prior to this.
These need to use arrayed texture types, or Metal will complain when
binding the resource. The target layer is addressed relative to the
Layer output by the vertex pipeline, or to the ViewIndex if in a
multiview pipeline. Unlike with the s/t coordinates, Vulkan does not
forbid non-zero layer coordinates here, though this cannot be expressed
in Vulkan GLSL.
Supporting 3D textures will require additional work. Part of the problem
is that Metal does not allow texture views to subset a 3D texture, so we
need some way to pass the base depth to the shader.
Some older iOS devices don't support layered rendering. In that case,
don't set `[[render_target_array_index]]`, because the compiler will
reject the shader in that case. The client will then have to unroll the
render pass manually.
This should hopefully reduce underutilization of the GPU, especially on
GPUs where the thread execution width is greater than the number of
control points.
This also simplifies initialization by reading the buffer directly
instead of using Metal's vertex-attribute-in-compute support. It turns
out the only way in which shader stages are allowed to differ in their
interfaces is in the number of components per vector; the base type must
be the same. Since we are using the raw buffer instead of attributes, we
can now also emit arrays and matrices directly into the buffer, instead
of flattening them and then unpacking them. Structs are still flattened,
however; this is due to the need to handle vectors with fewer components
than were output, and I think handling this while also directly emitting
structs could get ugly.
Another advantage of this scheme is that the extra invocations needed to
read the attributes when there were more input than output points are
now no more. The number of threads per workgroup is now lcm(SIMD-size,
output control points). This should ensure we always process a whole
number of patches per workgroup.
To avoid complexity handling indices in the tessellation control shader,
I've also changed the way vertex shaders for tessellation are handled.
They are now compute kernels using Metal's support for vertex-style
stage input. This lets us always emit vertices into the buffer in order
of vertex shader execution. Now we no longer have to deal with indexing
in the tessellation control shader. This also fixes a long-standing
issue where if an index were greater than the number of vertices to
draw, the vertex shader would wind up writing outside the buffer, and
the vertex would be lost.
This is a breaking change, and I know SPIRV-Cross has other clients, so
I've hidden this behind an option for now. In the future, I want to
remove this option and make it the default.
Metal is picky about interface matching. If the types don't match
exactly, down to the number of vector components, Metal fails pipline
compilation. To support pipelines where the number of components
consumed by the fragment shader is less than that produced by the vertex
shader, we have to fix up the fragment shader to accept all the
components produced.
Like with `point_size` when not rendering points, Metal complains when
writing to a variable using the `[[depth]]` qualifier when no depth
buffer be attached. In that case, we must avoid emitting `FragDepth`,
just like with `PointSize`.
I assume it will also complain if there be no stencil attachment and the
shader write to `[[stencil]]`, or it write to `[[color(n)]]` but there
be no color attachment at n.
Here, the inline uniform block is explicit: we instantiate the buffer
block itself in the argument buffer, instead of a pointer to the buffer.
I just hope this will work with the `MTLArgumentDescriptor` API...
Note that Metal recursively assigns individual members of embedded
structs IDs. This means for automatic assignment that we have to
calculate the binding stride for a given buffer block. For MoltenVK,
we'll simply increment the ID by the size of the inline uniform block.
Then the later IDs will never conflict with the inline uniform block. We
can get away with this because Metal doesn't require that IDs be
contiguous, only monotonically increasing.
If there are enough members in an IAB, we cannot use the constant
address space as MSL compiler complains about there being too many
members. Support emitting the device address space instead.
Some fallout where internal functions are using stronger types.
Overkill to move everything over to strong types right now, but perhaps
move over to it slowly over time.
This change introduces functions and in one case, a class, to support
the `VK_KHR_sampler_ycbcr_conversion` extension. Except in the case of
GBGR8 and BGRG8 formats, for which Metal natively supports implicit
chroma reconstruction, we're on our own here. We have to do everything
ourselves. Much of the complexity comes from the need to support
multiple planes, which must now be passed to functions that use the
corresponding combined image-samplers. The rest is from the actual
Y'CbCr conversion itself, which requires additional post-processing of
the sample retrieved from the image.
Passing sampled images to a function was a particular problem. To
support this, I've added a new class which is emitted to MSL shaders
that pass sampled images with Y'CbCr conversions attached around. It
can handle sampled images with or without Y'CbCr conversion. This is an
awful abomination that should not exist, but I'm worried that there's
some shader out there which does this. This support requires Metal 2.0
to work properly, because it uses default-constructed texture objects,
which were only added in MSL 2. I'm not even going to get into arrays of
combined image-samplers--that's a whole other can of worms. They are
deliberately unsupported in this change.
I've taken the liberty of refactoring the support for texture swizzling
while I'm at it. It's now treated as a post-processing step similar to
Y'CbCr conversion. I'd like to think this is cleaner than having
everything in `to_function_name()`/`to_function_args()`. It still looks
really hairy, though. I did, however, get rid of the explicit type
arguments to `spvGatherSwizzle()`/`spvGatherCompareSwizzle()`.
Update the C API. In addition to supporting this new functionality, add
some compiler options that I added in previous changes, but for which I
neglected to update the C API.
Older API was oriented around IDs which are not available unless you're
doing full reflection, which is awkward for certain use cases which know
their set/bindings up front.
Optimize resource bindings to be hashmap rather than doing linear seeks
all the time.
This gets rather complicated because MSL does not support OpArrayLength
natively. We need to pass down a buffer which contains buffer sizes, and
we compute the array length on-demand.
Support both discrete descriptors as well as argument buffers.
