This pass converts an internal form of GLSLstd450 Interpolate ops
to the externally valid form. The external form takes the lvalue
of the interpolant. The internal form can do a load of the interpolant.
The pass replaces the load with its pointer. The internal form is
generated by glslang and possibly other frontends for HLSL shaders.
The new pass is called as part of HLSL legalization after all
propagation is complete.
Also adds internal interpolate form to pre-legalization validation
This allows the GPU-AV layer to differentiate between errors with
uniform buffers versus storage buffers and map these to the relevant
VUIDs.
This is a resubmit of a previously reverted commit. The revert was
done as someone erroneously attempted to build the latest validation
layers with a TOT spirv-tools. The validation layers must be built with
their known-good glslang and its known-good spirv-tools and spirv-headers.
* Validate SPV_KHR_workgroup_memory_explicit_layout
* Check if SPIR-V is at least 1.4 to use the extension.
* Check if either only Workgroup Blocks or only Workgroup non-Blocks
are used.
* Check that if more than one Workgroup Block is used, variables are
decorated with Aliased.
* Check layout decorations for Workgroup Blocks.
* Implicitly use main capability if the ...8BitAccess or
...16BitAccess are used.
* Allow 8-bit and 16-bit types when ...8BitAccess and ...16BitAccess
are used respectively.
* Update SPIRV-Headers dependency
Bump it to include SPV_KHR_workgroup_memory_explicit_layout.
* Add option to validate Workgroup blocks with scalar layout
Validate the equivalent of scalarBlockLayout for Workgroup storage
class Block variables from SPV_KHR_workgroup_memory_explicit_layout.
Add option to the API and command line tool.
This patch supports new Intel extensions added via
https://github.com/KhronosGroup/SPIRV-Headers/pull/176
SPV_INTEL_fooat_controls2 requires extra support to add
two new operand types:
SPV_OPERAND_TYPE_FPDENORM_MODE
SPV_OPERAND_TYPE_FPOPERATION_MODE
This instruments ImageRead, ImageWrite and ImageFetch when applied to
texel buffers.
Also add new (but not yet generated) buffer OOB error codes differentiated
for VUID classification.
Removing PropagateLineInfoPass and RedundantLineInfoElimPass from
56d0f5035 makes unit tests of many open source projects fail.
It will happen before submitting this glslang PR
https://github.com/KhronosGroup/glslang/pull/2440. This commit will be
git-reverted after merging the glslang PR.
Based on the OpLine spec, an OpLine instruction must be applied to
the instructions physically following it up to the first occurrence
of the next end of block, the next OpLine instruction, or the next
OpNoLine instruction.
```
OpLine %file 0 0
OpNoLine
OpLine %file 1 1
OpStore %foo %int_1
%value = OpLoad %int %foo
OpLine %file 2 2
```
For the above code, the current spirv-opt keeps three line
instructions `OpLine %file 0 0`, `OpNoLine`, and `OpLine %file 1 1`
in `std::vector<Instruction> dbg_line_insts_` of Instruction class
for `OpStore %foo %int_1`. It does not put any line instruction to
`std::vector<Instruction> dbg_line_insts_` of
`%value = OpLoad %int %foo` even though `OpLine %file 1 1` must be
applied to `%value = OpLoad %int %foo` based on the spec.
This results in the missing line information for
`%value = OpLoad %int %foo` while each spirv-opt pass optimizes the
code. We have to put `OpLine %file 1 1` to
`std::vector<Instruction> dbg_line_insts_` of
both `%value = OpLoad %int %foo` and `OpStore %foo %int_1`.
This commit conducts the line instruction propagation and skips
emitting the eliminated line instructions at the end, which are the same
with PropagateLineInfoPass and RedundantLineInfoElimPass. This
commit removes PropagateLineInfoPass and RedundantLineInfoElimPass.
KhronosGroup/glslang#2440 is a related PR that stop using
PropagateLineInfoPass and RedundantLineInfoElimPass from glslang.
When the code in this PR applied, the glslang tests will pass.
This CL adds some extra new lines and context comments into the
spirv-dis output format. This CL adds:
- Blank line and '; Annotations' before decorations
- Blank line and '; Debug Information' before debug instructions
- Blank line and '; Types, variables and constants' before type section
- Blank line and '; Function <name>' before each function.
Issue #788
This change introduces various strategies for controlling the manner
in which fuzzer passes are applied repeatedly, including infrastructure
to allow fuzzer passes to be recommended based on which passes ran
previously.
Motivated by integrating spirv-reduce into spirv-fuzz, so that an
added function can be made smaller during shrinking, this adds support
in spirv-reduce for asking reduction to be restricted to the
instructions of a single specified function.
* Generate ext inst table for reflection
* Change build to use grammar files from SPIRV-Headers instead of
SPIRV-Tools
* Add enum for clspv reflection extended instruction set
* count it as non-semantic
* validate clspv reflection extended instruction set
* Remove local extended inst sets
* update headers deps
* Update nbuilds to use grammars from SPIRV-Headers instead of
local duplicates
* Avoid operand type range checks
Deprecates the SPV_OPERAND_TYPE_FIRST_* and SPV_OPERAND_TYPE_LAST_*
macros.
The "variable" and "optional" operand types are only for internal use.
Export spvOperandIsConcrete instead, as that should cover intended
external uses.
Test that each operand type is classified either as one of:
- a sentinel value
- a concrete operand type
- an optional operand type (which includes variable-expansion types)
Test that each concrete and optional non-variable operand type
has a name for use internally when generating messages.
Co-authored-by: Steven Perron <stevenperron@google.com>
Create a pass to instrument OpDebugPrintf instructions. This pass replaces all OpDebugPrintf instructions with instructions to write a record containing the string id and the all specified values into a special printf output buffer (if space allows). This pass is designed to support the printf validation in the Vulkan validation layers.
Fixes#3210
This new API lets clients request a minimal spv_target_env value
that supports a given Vulkan and SPIR-V version, by a generic
numbering scheme (as already defined by Vulkan and SPIR-V specs).
This breaks a formal source dependency from Glslang to SPIRV-Tools.
When a new API is rolled out, such as Vulkan 1.2, Glslang currently
needs to reference a specific SPIRV-Tools enum by name.
* Clone opencl.debuginfo.100 grammar from debuginfo grammar
Update version number to 200 revision 2
* Apply content from OpenCL.DebugInfo.100 extension text
* Rename grammar file
* Support OpenCL.DebugInfo.100 extended instructions
Add support for prefixing operand type names, to disambiguate
them between different instruction sets.
* Add tests for OpenCL.DebugInfo.100
* Support lookup of OpenCL.DebugInfo.100 extinst
* Add tests for enum values
* Recognize 2017-2019 as copyright date range
* Android.mk: support OpenCL.DebugInfo.100 extended instruction set
Also, stop generating core instruction tables for non-unified1 versions
of the grammar.
* Imported entity operand type is concrete
* Bazel: Suppoort OpenCL.DebugInfo.100
* BUILD.gn: Support OpenCL.DebugInfo.100
Add support for SPV_KHR_non_semantic_info
This entails a couple of changes:
- Allowing unknown OpExtInstImport that begin with the prefix `NonSemantic.`
- Allowing OpExtInst that reference any of those sets to contain unknown
ext inst instruction numbers, and assume the format is always a series of IDs
as guaranteed by the extension.
- Allowing those OpExtInst to appear in the types/variables/constants section.
- Not stripping OpString in the --strip-debug pass, since it may be referenced
by these non-semantic OpExtInsts.
- Stripping them instead in the --strip-reflect pass.
* Add adjacency validation of non-semantic OpExtInst
- We validate and test that OpExtInst cannot appear before or between
OpPhi instructions, or before/between OpFunctionParameter
instructions.
* Change non-semantic extinst type to single value
* Add helper function spvExtInstIsNonSemantic() which will check if the extinst
set is non-semantic or not, either the unknown generic value or any future
recognised non-semantic set.
* Add test of a complex non-semantic extinst
* Use DefUseManager in StripDebugInfoPass to strip some OpStrings
* Any OpString used by a non-semantic instruction cannot be stripped, all others
can so we search for uses to see if each string can be removed.
* We only do this if the non-semantic debug info extension is enabled, otherwise
all strings can be trivially removed.
* Silence -Winconsistent-missing-override in protobufs
* Make Instrumentation format version 2 the default (Step 1)
Add new interfaces without version number argument. Remove version 1
logic and tests. Version interfaces will be removed in step 2 after
layers have transitioned to new interface.
* Add error messages to InstrumentPass().
Access chain indices are always interpreted as signed integers.
So use signed clamp instead of unsigned clamp. We must also
clamp to the max signed int for the index type.
Fixes#3072
Adds an option to run the validator on the SPIR-V binary after each
fuzzer pass has been applied, to help identify when the fuzzer has
made the module invalid. Also adds a helper method to allow dumping
of the sequence of transformations that have been applied to a JSON
file.
To aid in debugging issues in spirv-fuzz, this change adds an option whereby the SPIR-V module is validated after each transformation is applied during replay. This can assist in finding a transformation that erroneously makes the module invalid, so that said transformation can be debugged.
* Ensure same enum values have consistent extension lists
* val: fix checking of capabilities
The operand for an OpCapability should only be
checked for the extension or core version.
The InstructionPass registers a capability, and all its implied
sub-capabilities before actually checking the operand to an
OpCapability.
* Add basic support for SPIR-V 1.5
- Adds SPV_ENV_UNIVERSAL_1_5
- Command line tools default to spv1.5 environment
- SPIR-V 1.5 incorporates several extensions. Now the disassembler
prefers outputing the non-EXT or non-KHR names. This requires
updates to many tests, to make strings match again.
- Command line tests: Expect SPIR-V 1.5 by default
* Test validation of SPIR-V 1.5 incorporated extensions
Starting with 1.5, incorporated features no longer require
the associated OpExtension instruction.
The first pass applies the RelaxedPrecision decoration to all executable
instructions with float32 based type results. The second pass converts
all executable instructions with RelaxedPrecision result to the equivalent
float16 type, inserting converts where necessary.
Add the first steps to removing the AMD extension VK_AMD_shader_ballot.
Splitting up to make the PRs smaller.
Adding utilities to add capabilities and change the version of the
module.
Replaces the instructions:
OpGroupIAddNonUniformAMD = 5000
OpGroupFAddNonUniformAMD = 5001
OpGroupFMinNonUniformAMD = 5002
OpGroupUMinNonUniformAMD = 5003
OpGroupSMinNonUniformAMD = 5004
OpGroupFMaxNonUniformAMD = 5005
OpGroupUMaxNonUniformAMD = 5006
OpGroupSMaxNonUniformAMD = 5007
and extentend instructions
WriteInvocationAMD = 3
MbcntAMD = 4
Part of #2814
We are no able to inline OpKill instructions into a continue construct.
See #2433. However, we have to be able to inline to correctly do
legalization. This commit creates a pass that will wrap OpKill
instructions into a function of its own. That way we are able to inline
the rest of the code.
The follow up to this will be to not inline any function that contains
an OpKill.
Fixes#2726
spirv-opt: Add --graphics-robust-access
Clamps access chain indices so they are always
in bounds.
Assumes:
- Logical addressing mode
- No runtime-array-descriptor-indexing
- No variable pointers
Adds stub code for clamping coordinate and samples
for OpImageTexelPointer.
Adds SinglePassRunAndFail optimizer test fixture.
Android.mk: add source/opt/graphics_robust_access_pass.cpp
Adds Constant::GetSignExtendedValue, Constant::GetZeroExtendedValue
Adds to spirv-fuzz the option to shrink a sequence of transformations
that lead to an interesting binary to be generated, to find a smaller
sub-sequence of transformations that still lead to an interesting (but
hopefully simpler) binary being generated. The notion of what counts
as "interesting" comes from a user-provided script, the
"interestingness function", similar to the way the spirv-reduce tool
works. The shrinking process will give up after a maximum number of
steps, which can be configured on the command line.
Tests for the combination of fuzzing and shrinking are included, using
a variety of interestingness functions.
New version has additional word in stage-specific section. Also
some changes in content for tesselation and compute shaders. Either
version can be invoked at pass creation. This is done to ease integration
and updating of validation layers. Version 1 is deprecated and eventually
will go away.
Also sneaking in fix to version 1 compute shaders.
Adds a library for spirv-fuzz, consisting of a Fuzzer class that will
transform a module with respect to (a) facts about the module provided
via a FactManager class, and (b) a source of random numbers and
parameters to control the transformation process provided via a
FuzzerContext class. Transformations will be applied via classes that
implement a FuzzerPass interface, and both facts and transformations
will be represented via protobuf messages. Currently there are no
concrete facts, transformations nor fuzzer passes; these will follow.
