Adding a new type instruction required making the same change in two
places.
Also remove IsCompileTimeConstantInst that was used in a single place
and replace its use by an expression that better conveys the intent.
Change-Id: I49330b74bd34a35db6369c438c053224805c18e0
Signed-off-by: Kevin Petit <kevin.petit@arm.com>
Constexpr guaranteed no runtime init in addition to const semantics.
Moving all opt/ to constexpr.
Moving all compile-unit statics to anonymous namespaces to uniformize
the method used (anonymous namespace vs static has the same behavior
here AFAIK).
Signed-off-by: Nathan Gauër <brioche@google.com>
spirv-diff is a new tool that produces diff-style output comparing two
SPIR-V modules. The instructions between the src and dst modules are
matched as best as the tool can, and output is produced (in src
id-space) that shows which instructions are removed in src, added in dst
or modified between them. The order of instructions are not retained.
Matching instructions between two SPIR-V modules is not trivial, and
thus a number of heuristics are applied in this tool. In particular,
without debug information, it's hard to match functions as they can be
reordered. As such, this tool is primarily useful to produce the diff
of two SPIR-V modules derived from the same source.
This tool can be useful in a number of scenarios:
- Compare the SPIR-V before and after modifying a shader
- Compare the SPIR-V produced from a shader before and after compiler
codegen changes.
- Compare the SPIR-V produced from a shader before and after some
transformation or optimization.
- Compare the SPIR-V produced from a shader with different compilers.
* Fix endianness of string literals
To get correct and consistent encoding and decoding of string literals
on big-endian platforms, use spvtools::utils::MakeString and MakeVector
(or wrapper functions) consistently for handling string literals.
- add variant of MakeVector that encodes a string literal into an
existing vector of words
- add variants of MakeString
- add a wrapper spvDecodeLiteralStringOperand in source/
- fix wrapper Operand::AsString to use MakeString (source/opt)
- remove Operand::AsCString as broken and unused
- add a variant of GetOperandAs for string literals (source/val)
... and apply those wrappers throughout the code.
Fixes #149
* Extend round trip test for StringLiterals to flip word order
In the encoding/decoding roundtrip tests for string literals, include
a case that flips byte order in words after encoding and then checks for
successful decoding. That is, on a little-endian host flip to big-endian
byte order and then decode, and vice versa.
* BinaryParseTest.InstructionWithStringOperand: also flip byte order
Test binary parsing of string operands both with the host's and with the
reversed byte order.
* Don't eliminate dead members from StructuredBuffer as layout(offset) qualifiers cannot be applied to structure fields.
* Traverse arrays when marking structs as fully used.
Co-authored-by: Steven Perron <stevenperron@google.com>
Debug[No]Line are tracked and optimized using the same mechanism that tracks
and optimizes Op[No]Line.
Also:
- Fix missing DebugScope at top of block.
- Allow scalar replacement of access chain in DebugDeclare
Includes:
- Shift to use of spirv-header extinst.nonsemantic.shader grammar.json
- Remove extinst.nonsemantic.vulkan.debuginfo.100.grammar.json
- Enable all optimizations for Shader.DebugInfo
Also fixes scalar replacement to only insert DebugValue after all
OpVariables. This is not necessary for OpenCL.DebugInfo, but it is
for Shader.DebugInfo.
Likewise, fixes Private-to-Local to insert DebugDeclare after all
OpVariables.
Also fixes inlining to handle FunctionDefinition which can show up
after first block if early return processing happens.
Co-authored-by: baldurk <baldurk@baldurk.org>
* Work around GCC-9 warning treated as error
```
../source/opt/instruction.h:101:23: error: '*((void*)& operand +32)' may be used uninitialized in this function [-Werror=maybe-uninitialized]
101 | uint64_t result = uint64_t(words[0]);
```
* Migrate all Kokoro build scripts over to use the docker VM image
Required updating the NDK SDK and build scripts, as well as the check_copyright for handling 2021.
When we update OpenCL.DebugInfo.100 lexical scopes e.g., DebugFunction,
we have to replace DebugScope of each instruction that uses the lexical
scope correctly.
* No longer blindly add global non-semantic info instructions to global
types and values
* functions now have a list of non-semantic instructions that succeed
them in the global scope
* global non-semantic instructions go in global types and values if
they appear before any function, otherwise they are attached to the
immediate function predecessor in the module
* changed ADCE to use the function removal utility
* Modified EliminateFunction to have special handling for non-semantic
instructions in the global scope
* non-semantic instructions are moved to an earlier function (or full
global set) if the function they are attached to is eliminated
* Added IRContext::KillNonSemanticInfo to remove the tree of
non-semantic instructions that use an instruction
* this is used in function elimination
* There is still significant work in the optimizer to handle
non-semantic instructions fully in the optimizer
When we copy the loop body to unroll it, we have to copy its
instructions but DebugDeclare or DebugValue used for the declaration
i.e., DebugValue with Deref must not be copied and only the first block
can contain those instructions.
1. Set the debug scope and line information for the new replacement
instructions.
2. Replace DebugDeclare and DebugValue if their OpVariable or value
operands are replaced by scalars. It uses 'Indexes' operand of
DebugValue. For example,
struct S { int a; int b;}
S foo; // before scalar replacement
int foo_a; // after scalar replacement
int foo_b;
DebugDeclare %dbg_foo %foo %null_expr // before
DebugValue %dbg_foo %foo_a %Deref_expr 0 // after
DebugValue %dbg_foo %foo_b %Deref_expr 1 // means Value(foo.members[1]) == Deref(%foo_b)
The decision to reduce the load must be not affected by debug
instructions. For example, even when a DebugValue references a
result id of a loaded composite value, this change lets the
reduce-load-size pass reduce the load if the full composite value is not
used anywhere other than the DebugValue.
When the pass replaces the local variable `OpVariable` ids to their
corresponding pointers, we have to update operands of DebugValue or
DebugDeclare instructions.
Handles the OpenCL100Debug extension in inlining. It preserves the information that is available while also adding the debug inlined at for all of the inlining that it does.
In this PR, the classes that represent the adjust branch weights
transformation and fuzzer pass were implemented. This transformation
adjusts the branch weights of a OpBranchConditional instruction.
Generalizes the IsReadOnlyVariable() method, and related methods, so
that they can be used to ask whether pointer result ids are read-only.
Fixes#3324.
* Preserve debug info in eliminate-dead-functions
The elimination of dead functions makes OpFunction operand of
DebugFunction invalid. This commit replaces the operand with
DebugInfoNone.
When DebugScope is given in SPIR-V, each instruction following the
DebugScope is from the lexical scope pointed by the DebugScope in
the high level language. We add DebugScope struction to keep the
scope information in Instruction class. When ir_loader loads
DebugScope/DebugNoScope, it keeps the scope information in
|last_dbg_scope_| and lets following instructions have that scope
information.
In terms of DebugDeclare/DebugValue, if it is in a function body
but outside of a basic block, we keep it in |debug_insts_in_header_|
of Function class. If it is in a basic block, we keep it as a normal
instruction i.e., in a instruction list of BasicBlock.
As explained in #3118, spirv-opt merge-blocks pass causes a
spirv-val error when an OpBranch has an OpLine in front of it.
OpLoopMerge
OpBranch ; Will be killed by merge-blocks pass
OpLabel ; Will be killed by merge-blocks pass
OpLine ; will be placed between OpLoopMerge and OpBranch - error!
OpBranch
To fix this issue, this commit moves line info of OpBranch to
OpLoopMerge.
Fixes#3118
spirv-opt: Add --graphics-robust-access
Clamps access chain indices so they are always
in bounds.
Assumes:
- Logical addressing mode
- No runtime-array-descriptor-indexing
- No variable pointers
Adds stub code for clamping coordinate and samples
for OpImageTexelPointer.
Adds SinglePassRunAndFail optimizer test fixture.
Android.mk: add source/opt/graphics_robust_access_pass.cpp
Adds Constant::GetSignExtendedValue, Constant::GetZeroExtendedValue
* Added a reduction pass to replace ids with ids of the same type that dominate them.
* Introduce helper method for querying whether an operand type is an input id.
Consider atomics that load when analyzing live stores in ADCE.
Previously it asserted that the base of an OpImageTexelPointer should
be an image. It is actually a pointer to an image, so IsValidBasePointer
should suffice.
When using lldb and/or gdb I frequently get odd std::string failures
when using the IR printing instructions we have now. This adds the
methods Instruction::Dump(), BasicBlock::Dump() and Function::Dump() to
emit the output of the pretty print to stderr.
With this I can now reliably print IR from gdb and lldb sessions.
Currentlty opt::Instruction class holds a cache of the result_id and
type_id for the instruction. That cache needs to be updated if the
underlying operand values are changes.
This CL changes the cache to being a flag if there is a type or result
id for the instruction. We then retrieve the value if needed from the
operands.
This CL moves the files in opt/ to consistenly be under the opt::
namespace. This frees up the ir:: namespace so it can be used to make a
shared ir represenation.
We replace the std::vector in the Operand class by a new class that does
a small size optimization. This helps improve compile time on Windows.
Tested on three sets of shaders. Trying various values for the small
vector. The optimal value for the operand class was 2. However, for
the Instruction class, using an std::vector was optimal. Size of "0"
means that an std::vector was used.
Instruction size
0 4 8
Operand Size
0 489 544 684
1 593 487
2 469 570
4 473
8 505
This is a single thread run of ~120 shaders. For the multithreaded run
the results were the similar. The basline time was ~62sec. The
optimal configuration was an 2 for the OperandData and an
std::vector for the OperandList with a compile time of ~38sec. Similar
expiriments were done with other sets of shaders. The compile time still
improved, but not as much.
Contributes to https://github.com/KhronosGroup/SPIRV-Tools/issues/1609.
At this time, DCE will only remove an instruction if it is a combinator.
However, there are certain non-combinator instructions that can be
safely removed if their results are not used. The derivative
instructions are on example.
We are also missing some instructions from the list of combinators
those are added as the same time.
Track live scalars in VDCE as if they were single element vectors.
Handle the extended instructions for GLSL in VDCE.
Handle composite construct instructions in VDCE.
Track live scalars in VDCE as if they were single element vectors.
Handle the extended instructions for GLSL in VDCE.
Handle composite construct instructions in VDCE.
Fixes#1511.
This reimplementation fixes several issues when removing decorations associated
to an ID (partially addresses #1174 and gives tools for fixing #898), as well
as making it easier to remove groups; a few additional tests have been added.
DecorationManager::RemoveDecoration() will still not delete dead decorations it
created, but I do not think it is its job either; given the following input
```
OpCapability Shader
OpCapability Linkage
OpMemoryModel Logical GLSL450
OpDecorate %2 Restrict
%2 = OpDecorationGroup
OpGroupDecorate %2 %1 %3
OpDecorate %4 Invariant
%4 = OpDecorationGroup
OpGroupDecorate %4 %2
%uint = OpTypeInt 32 0
%1 = OpVariable %uint Uniform
%3 = OpVariable %uint Uniform
```
which of the following two outputs would you expect RemoveDecoration(2) to produce:
```
OpCapability Shader
OpCapability Linkage
OpMemoryModel Logical GLSL450
%uint = OpTypeInt 32 0
%1 = OpVariable %uint Uniform
%3 = OpVariable %uint Uniform
```
or
```
OpCapability Shader
OpCapability Linkage
OpMemoryModel Logical GLSL450
OpDecorate %4 Invariant
%4 = OpDecorationGroup
%uint = OpTypeInt 32 0
%1 = OpVariable %uint Uniform
%3 = OpVariable %uint Uniform
```
Fixes https://github.com/KhronosGroup/SPIRV-Tools/issues/924
Fixes https://github.com/KhronosGroup/SPIRV-Tools/issues/1174
This change implements instruction folding for arithmetic operations
that are redundant, specifically:
x + 0 = 0 + x = x
x - 0 = x
0 - x = -x
x * 0 = 0 * x = 0
x * 1 = 1 * x = x
0 / x = 0
x / 1 = x
mix(a, b, 0) = a
mix(a, b, 1) = b
Cache ExtInst import id in feature manager
This allows us to avoid string lookups during optimization; for now we
just cache GLSL std450 import id but I can imagine caching more sets as
they become utilized by the optimizer.
Add tests for add/sub/mul/div/mix folding
The tests cover scalar float/double cases, and some vector cases.
Since most of the code for floating point folding is shared, the tests
for vector folding are not as exhaustive as scalar.
To test sub->negate folding I had to implement a custom fixture.
