spirv-opt: Add --graphics-robust-access
Clamps access chain indices so they are always
in bounds.
Assumes:
- Logical addressing mode
- No runtime-array-descriptor-indexing
- No variable pointers
Adds stub code for clamping coordinate and samples
for OpImageTexelPointer.
Adds SinglePassRunAndFail optimizer test fixture.
Android.mk: add source/opt/graphics_robust_access_pass.cpp
Adds Constant::GetSignExtendedValue, Constant::GetZeroExtendedValue
This makes it symmetric with the result type of ...->element_type which
returns a const Type.
So now we can write code like this:
analysis::Vector v = ...
analysis::Vector(v->element_type(), 2);
This fixes#2608.
The original test case had an out-of-bounds reference that ended up
folding into OpCompositeExtract that was indexing right outside the
constant composite.
The returned constant would then cause a segfault during constant
propagation.
Fixes#2764
* Don't replace all uses when simplifying instructions, instead only
update non-debug, non-decoration uses
* added a test
* Add a new version of RAUW that takes a predicate to decide whether to
replace the use or not
* used in simplification pass
* Fix#2609 - Handle out-of-bounds scalar replacements.
When SROA tries to do a replacement for an OpAccessChain that is exactly
one element out of bounds, the code was trying to access its internal
array of replacements and segfaulting.
This protects the code from doing this, and it additionally fixes the
way SROA works by not returning failure when it refuses to do a
replacement. Instead of failing the optimization pass, SROA will now
simply refuse to do the replacement and keep going.
Additionally, this patch fixes the SROA logic to now return a proper status so we can
correctly state that the pass made no changes to the IR if it only found
invalid references.
Merge return expects unreachable merge block to look a certain way, and
unreachable continue blocks to look a certain way. What if an
unreachable block is both a merge and a continue? The continue is
suppose to take precedent, but merge-return implements it with the merge
taking precedent. This change flips that around.
Fixes#2746
* Process OpDecorateId in ADCE
When there is an OpDecorateId instruction that is live,
the ids that is references must be kept live. This change
adds them to the worklist.
I've also updated a validator check to allow OpDecorateId
to be able to apply to decoration groups.
Fixes#1759.
* Remove dead code.
In merge return, we need to know the original dominator for a block in order to
traverse code from the original dominator to the new dominator and add
appropriate Phi nodes. The current code gets this wrong because the dominator
tree is build as needed. The first time we get the immediate dominator for a
function we just built the dominator tree and it takes into account that a
block has been split. The second time it does not.
This inconsistency needs to be fixed. We do that by recording the original
dominator for all blocks at the start of the pass.
If we were to record just the basic block, that could change if the block is
split. We want to traverse the code in the body of the original dominator,
whatever block it ends up in. To make this easy to track, we not save the
terminator instruction to represent the original dominator.
Fixes#2745
When a phi candidate is marked as trivial, we are suppose to update all
of its uses to the reference the value that it is being folded to.
However, the code updates the uses misses `defs_at_block_`. So at a
later time, the id for the trivial phi can reemerge.
Fixes#2744
* Bindless Instrument: Make init check depend solely on input_init_enabled
Previously was dependent on presense of descriptor_indexing extension
in SPIR-V, but this missed some cases. Tests updated to refect this new
policy.
* Fix format.
* Fix bug in merge return
The merge return pass seems to assume that the only new edges in the cfg
are from return block to merge blocks. However, it is possible that a
merge block branches to a merge block when it did not before.
This change add a new variable to track all of the new edges. It also
renames some other variables and cleans us the code to make it a bit
easier to read.
Fixes#2702.
Dead branch elimination needs to know about the constructs that a block is contained it when determining what to do with its merge instruction. We currently fold branches in block as we see them, which is parent constructs before their children. This causes the struct cfg analysis to crash because it tries to get the parent construct for a block after the parent has been folded.
This can be fixed by folding the branch of the children before the parents.
Fixes#2667.
There are a couple spots where we are not looking at decorations when we should.
1. Value numbering is suppose to assign a different value number to ids if they have different decorations. However that is not being done for OpCopyObject and OpPhi.
1. Instruction simplification is propagating OpCopyObject instruction without checking for decorations. It should only do that if no decorations are being lost.
Add a new function to the decoration manager to check if the decorations of one id are a subset of the decorations of another.
Fixes#2715.
Inlining does not inline functions that have a single return that is in a loop. This is because the return cannot be replaced by a branch outside of the loop easily. Merge return knows how to rewrite the function so the return is replaced by a branch.
Fixes#2038.
It is illegal to inline an OpKill instruction into a continue construct because the continue header will no longer dominate the backedge.
This commit adds a check for this, and does not inline.
If we still want to be able to inline a function that contains an OpKill, we can add a new pass that will wrap OpKill instructions into its own function with just the single instruction.
I do not believe that this is a common case right now, so I will not do that yet.
Fixes#2433.
When working on descriptor indexing validation for compute shaders, the
gl_GlobalInvocationID builtin was being loaded as uint which would cause
compute shaders instrumented by the bindless check pass to have:
%83 = OpLoad %uint %gl_GlobalInvocationID
%84 = OpCompositeExtract %uint %83 0
%85 = OpCompositeExtract %uint %83 1
%86 = OpCompositeExtract %uint %83 2
which results in validation failures:
error: line 127: Reached non-composite type while indexes still remain
to be traversed.
%84 = OpCompositeExtract %uint %83 0
for trying to extract a uint from a uint.
When it's an OpConstant or OpSpecConstant, then the literal
values are compared. If the OpSpecConstant also has a SpecId
decoration, then that's also compared.
Otherwise, it's an OpSpecConstantOp and we only compare the
ID of the OpSpecConstantOp instruction itself.
Fixes#2649
* Types: Avoid comparing IDs for in Type::IsSameImpl
When linking, we end up with duplicate types for imported and exported
types, that needs to be removed. The current code would reject valid
import/export pairs of symbols due to IDs mismatch, even if the types or
constants behind those ID were the same.
Enabled remaining type_match_test
Fixes#2442
New version has additional word in stage-specific section. Also
some changes in content for tesselation and compute shaders. Either
version can be invoked at pass creation. This is done to ease integration
and updating of validation layers. Version 1 is deprecated and eventually
will go away.
Also sneaking in fix to version 1 compute shaders.
* Handle nested breaks from switches.
There was a recent decision made to allow branches to the merge node of
a switch even if the switch is not the first enclosing construct. They
can be generated by glslang from break statements in switches.
Dead branch elimination seems to be the only optimization that will
break because of this change, so I will update that optimizations.
The change made are:
- Track switches in structured cfg analysis.
- In Dead branch elimination:
- Look for nested breaks that will require a switch instruction.
- Rewrite, but don't delete, switchs that are required even if it
could be replaced by an unconditional branch.
- When looking for the first break, consider the merge of a switch
as well.
See #2612.
* Fix variable names and comments.
* Add tests for the struct cfg analysis and switches.
* Fix typos in comments.
In order to try to reduce code duplication and to be able
to fold more cases, we want to use the instruction folder
when folding an OpSpecConstantOp with constant operands.
A couple other changes are need to make this work. First
GetDefiningInstruction| in the constant manager is able
to handle |type_id| being logically equivalent to another
type, so we updated the interface, and removed the assert.
Some tests were also updated because we not generate
better code because constants are not duplicated as much
as before.
No need for new tests. The functionality of the instruction folder is
already tested. There are tests check that the instruction folder is
being used correctly for OpCompositeExtract and OpVectorShuffle in the
existing test cases.
Fixes#2585.
* Update memory model support for SPIR-V 1.4
Fixes#2552
* Upgrade memory model now supports two memory access operands for
OpCopyMemory*
* in all cases the pass will first generate two operands by either
adding them or copying
* updates accounts for multiple operands
* tests
There is a case where sroa is not handling id overflow gracefully. It
is handled and an error message is output when the ids overflow.
Fixes https://crbug.com/961030.
Fixes#2555
* Fix a bug in validation where interfaces were considered non-unique
between different entry points targeting the same function
* added a test
* Update private to local pass to remove localized private variables
from entry point interfaces
* added tests
Fixes#2551
* Add support for 1.4 entry point interface lists
* only input and output variables are automatically live
* can clean up interfaces after DCE
* added tests
* allow opt tests to specify a target environment
Add functionality to fix-storage-class so that it can fix up mismatched
data types for pointers as well.
Fixes bugs in when fixing up storage class.
Move GenerateCopy to the Pass class to be reused.
The spirv-opt change for #2535.
* Change implementation of post order CFG traversal
It seems like the recursion is going very deep, and causing some problem
is particular situations. I've reimplemented the CFG post order
traversal to not use recursion.
Fixes#2539.
There was a bit shift done on 32-bit values, but they should have been
done on 64-bit values. This is fixed. At the same time, uses of size_t
are repalaced by uint64_t to ensure these values are 64-bit.
A test case cannot be created because the code that was change is not
run at the moment since we do not split up vectors or matricies. I do
not want to delete the code because I like to experitment with it every
once in a while.
Fixes#2528.
WebGPU requires certain variables to be initialized, whereas there are
known issues with using initializers in Vulkan. This PR is the first
of three implementing a pass to decompose initialized variables into
a variable declaration followed by a store. This has been broken up
into multiple PRs, because there 3 distinct cases that need to be
handled, which require separate implementations.
This first PR implements the basic infrastructure that is needed, and
handling of Function storage class variables. Private and Output will
be handled in future PRs.
This is part of resolving #2388
In WebGPU, the component operand 0xFFFFFFFF is forbidden, but in
Vulkan it is used to indicate a value is undefined. When converting to
WebGPU, 0xFFFFFFFF needs to converted to a legal value, though the
specific one does not matter, since it was used to indicate an
undefined entry in the original code. Choosing to use 0, since the
operands are required to be on [0, N-1], so 0 is guaranteed to always
be valid.
Fixes#2349
