PR #4118 (d71ac38b8e) let spirv-val report a validation error when we
use offset for an OpImage* instruction instead of ConstantOffset. Since
some compilers like DXC rely on spirv-opt for function inlining or loop
unrolling, the spirv-val change broke some working shaders when the
shader developers disable the optimization (spirv-opt).
For example, DXC recently got this issue from a few users e.g.,
https://github.com/microsoft/DirectXShaderCompiler/issues/3807
Since this error is reported only when the spirv-opt is disabled, it
looks like the exact case that we have to skip spirv-val when
`--before-legalize-hlsl` is given. Moreover, avoiding the error using
`--before-legalize-hlsl` on DXC is exactly what FXC and DXC's DXIL
do (they do not report the error if the offset becomes a constant after
function inlining or loop unrolling).
This change prevents TransformationOutlineFunction from outlining a
region of blocks if some block in the region has an unreachable
predecessor. This avoids a bug whereby the region would be outlined,
and the unreachable predecessors would be left behind, referring to
blocks that are no longer in the function.
The def-use manager was being incorrectly updated in
TransformationPermutePhiOperands, and this was causing future
transformations to go wrong during fuzzing. This change updates the
def-use manager in a correct manner, and adds a test exposing the
previous bug.
Fixes#4300.
The Transformation class tests did not cover the (trivial) ToMessage
methods of each transformation, nor the constructors that take a
protobuf message. This lac of coverage makes it hard to see which more
interesting pieces of code are not covered when looking at coverage
percentages. This change adapts the helper function for applying a
transformation and checking fresh ids so that it turns a
transformation into a protobuf message and back, thus covering
ToMessage and the protobuf constructor for every transformation. The
runtime overhead of doing this is very small.
Fixes https://crbug.com/tint/793
* When a loop has an empty loop construct, the loop construct and
continue construct share the same header so don't disallow the loop
header for the continue construct
Fix dangling phi bug from loop-unroll
When unrolling the following loop:
```
%const0 = OpConstant ...
%const1 = OpConstant ...
...
%LoopHeader = OpLabel
%phi0 = OpPhi %float %const0 %PreHeader %phi1 %Latch
%phi1 = OpPhi %float %const1 %PreHeader %x %Latch
...
%LoopBody = OpLabel
%x = OpFSub %float %phi1 %phi0
...
```
the loop-unroll pass sets the value of `%phi0` as `%phi1` for the second
copy of the loop body. For example, the second copy of
`%x = OpFSub %float %phi1 %phi0` will be
`%y = OpFSub %float %x %phi1`.
Since all phi instructions for inductions will are removed after the
loop unrolling, `%phi1` will be a dead dangling phi.
It happens only for the phi values of the first loop iteration. Replacing those
dangling phis with their initial values fixes this issue.
For example, the second copy of `%x = OpFSub %float %phi1 %phi0` should be
`%y = OpFSub %float %x %const1` because the value of `%phi1` from the
first loop iteration is `%const1`.
This pass converts an internal form of GLSLstd450 Interpolate ops
to the externally valid form. The external form takes the lvalue
of the interpolant. The internal form can do a load of the interpolant.
The pass replaces the load with its pointer. The internal form is
generated by glslang and possibly other frontends for HLSL shaders.
The new pass is called as part of HLSL legalization after all
propagation is complete.
Also adds internal interpolate form to pre-legalization validation
To help ensure that optimizations that do less cautious invalidation
of analyses are implemented correctly, this change adds checks to the
tests of various transformations to ensure that analyses such as
def-use are up to date.
This allows the GPU-AV layer to differentiate between errors with
uniform buffers versus storage buffers and map these to the relevant
VUIDs.
This is a resubmit of a previously reverted commit. The revert was
done as someone erroneously attempted to build the latest validation
layers with a TOT spirv-tools. The validation layers must be built with
their known-good glslang and its known-good spirv-tools and spirv-headers.
* Mark module as modified if convert-to-half removes decorations.
If the convert-to-half pass does not change the body of the function,
but removes decorations, it returns that nothing changed. This is
incorrect, and will be fixed.
Fixes https://github.com/KhronosGroup/SPIRV-Tools/issues/4117
* Update comment for RemoveDecorationsFrom
The existing spirv-opt `DebugInfoManager::AddDebugValueForDecl()` sets
the scope and line info of the new added DebugValue using the scope and
line of DebugDeclare. This is wrong because only a single DebugDeclare
must exist under a scope while we have to add DebugValue for all the
places where the variable's value is updated. Therefore, we have to set
the scope and line of DebugValue based on the places of the variable
updates.
This bug makes
https://github.com/google/amber/blob/main/tests/cases/debugger_hlsl_shadowed_vars.amber
fail. This commit fixes the bug.
* Validate SPV_KHR_workgroup_memory_explicit_layout
* Check if SPIR-V is at least 1.4 to use the extension.
* Check if either only Workgroup Blocks or only Workgroup non-Blocks
are used.
* Check that if more than one Workgroup Block is used, variables are
decorated with Aliased.
* Check layout decorations for Workgroup Blocks.
* Implicitly use main capability if the ...8BitAccess or
...16BitAccess are used.
* Allow 8-bit and 16-bit types when ...8BitAccess and ...16BitAccess
are used respectively.
* Update SPIRV-Headers dependency
Bump it to include SPV_KHR_workgroup_memory_explicit_layout.
* Add option to validate Workgroup blocks with scalar layout
Validate the equivalent of scalarBlockLayout for Workgroup storage
class Block variables from SPV_KHR_workgroup_memory_explicit_layout.
Add option to the API and command line tool.
Propagating the OpLine/OpNoLine to preserve the debug information
through transformations results in integrity check failures because of
the extra line instructions. This commit lets spirv-opt skip the
integrity check when the code contains OpLine or OpNoLine.
When there is an array of strutured buffers, desc sroa will only split
the array, but not a struct type in the structured buffer. However,
the calcualtion of the number of binding a struct requires does not take
this into consideration. This commit will fix that.
Avoid generating OpPhi on void types, and allow the transformation to
take place on regions that produce pointer and sampled image result
ids if such ids are not used after the region.
Fixes#3787.
* validation: tighter validation of multisampled images
- if MS=1, then Sample image operand is required
- Sampling operations are not permitted when MS=1
Fixes#4057, #4058
* Fail early for multisampled image for sampling, dref, gather
* validate StorageImageMultisampled capability
The StorageImageMultisampled capability is required when declaring
an image type with with Multisampled==1 and it's a storage image (Sampled == 2)
Fixes#4061
* Allow SubpassData with Multisampled and Sampled==2
The eliminate dead member pass is written assuming that the index to an
OpAccessChain will be a 32-bit integer or 64-bit integer. That is
changed to work for any width 64-bits or less.
Fixes https://crbug.com/1151727
* Add validation for ray tracing builtins
- Remove existing InstanceId testing that was combined with VertexId in awkward ways.
- Rather than adding a new set of functions for each ray tracing builtin, add
an error table that maps the builtin ID to the 3 common VUIDs for each builtin
(I could see this being extended for other builtins in the future).
- add F32 matrix validation function
- augment existing PrimitiveId validation to verify Input storage class for the
RT stages this is accepted in, and correct the list of stages that it is actually
accepted in (only Intersection / Any Hit / Closest Hit)
* add testing for ray tracing builtins
- remove exising InstanceId testing as it was tangled in with VertexId in now weird ways
and combine it with the new tests
- add testing for ray tracing builtins
- builtins accepted in the same stages and of the same types are combined into test functions
- add some new matrix types to the code generator so they can be used for testing
This instruments ImageRead, ImageWrite and ImageFetch when applied to
texel buffers.
Also add new (but not yet generated) buffer OOB error codes differentiated
for VUID classification.
* BuildModule: optionally avoid adding new OpLine instructions
Fixes#4029 for my use case
* Fix formatting
* Create last_line_inst_ only if doing extra line tracking
* Update to final ray tracing extensions
Drop Provisional from ray tracing enums
sed -ie 's/RayQueryProvisionalKHR/RayQueryKHR/g' **/*
sed -ie 's/RayTracingProvisionalKHR/RayTracingKHR/g' **/*
Add terminator support for SpvOpIgnoreIntersectionKHR and SpvOpTerminateRayKHR
Update deps for SPIRV-Headers
* Update capability dependencies for MeshShadingNV
Accommodate https://github.com/KhronosGroup/SPIRV-Headers/pull/180
MeshShadingNV: enables PrimitiveId, Layer, and ViewportIndex
Co-authored-by: Daniel Koch <dkoch@nvidia.com>
Fix buffer oob instrumentation for matrix refs.
Matrix stride decoration is not on matrix type but is a member decoration
on the enclosing struct type. Also correctly apply matrix stride depending
on row or column major.
spirv-opt has a bug that `DebugInfoManager::AddDebugValueWithIndex()` does not
preserve `Indexes` operands of
[DebugValue](https://www.khronos.org/registry/spir-v/specs/unified1/OpenCL.DebugInfo.100.html#DebugValue).
It has to preserve all of those `Indexes` operands, but it preserves only the first index
operand.
This PR removes `DebugInfoManager::AddDebugValueWithIndex()` and lets the spirv-opt
use `DebugInfoManager::AddDebugValueForDecl()`.
`DebugInfoManager::AddDebugValueForDecl()` preserves the Indexes operand correctly.
in 3943 the new tests should have failed, but didn't due to the AnyVUID
check not handling case with trailing whitespace. Added trimming to handle
it as easily might happen again in future
The front-end language compiler would simply emit DebugDeclare for
a variable when it is declared, which is effective through the variable's
scope. Since DebugDeclare only maps an OpVariable to a local variable,
the information can be removed when an optimization pass uses the
loaded value of the variable. DebugValue can be used to specify the
value of a variable. For each value update or phi instruction of a variable,
we can add DebugValue to help debugger inspect the variable at any
point of the program execution.
For example,
float a = 3;
... (complicated cfg) ...
foo(a); // <-- variable inspection: debugger can find DebugValue of `float a` in the nearest dominant
For the code with complicated CFG e.g., for-loop, if-statement, we
need help of ssa-rewrite to analyze the effective value of each variable
in each basic block.
If the value update of the variable happens only once and it dominates
all its uses, local-single-store-elim pass conducts the same value update
with ssa-rewrite and we have to let it add DebugValue for the value assignment.
One main issue is that we have to add DebugValue only when the value
update of a variable is visible to DebugDeclare. For example,
```
{ // scope1
%stack = OpVariable %ptr_int %int_3
{ // scope2
DebugDeclare %foo %stack <-- local variable "foo" in high-level language source code is declared as OpVariable "%stack"
// add DebugValue "foo = 3"
...
Store %stack %int_7 <-- foo = 7, add DebugValue "foo = 7"
...
// debugger can inspect the value of "foo"
}
Store %stack %int_11 <-- out of "scope2" i.e., scope of "foo". DO NOT add DebugValue "foo = 11"
}
```
However, the initalization of a variable is an exception.
For example, an argument passing of an inlined function must be done out of
the function's scope, but we must add a DebugValue for it.
```
// in HLSL
bar(float arg) { ... }
...
float foo = 3;
bar(foo);
// in SPIR-V
%arg = OpVariable
OpStore %arg %foo <-- Argument passing. Out of "float arg" scope, but we must add DebugValue for "float arg"
... body of function bar(float arg) ...
```
This PR handles the except case in local-single-store-elim pass. It adds
DebugValue for a store that is considered as an initialization.
The same exception handling code for ssa-rewrite is done by this commit: df4198e50e.
This fixes https://github.com/KhronosGroup/SPIRV-Tools/issues/3873.
In the presence of variable pointers, the reaching definition may be
another pointer. For example, the following fragment:
%2 = OpVariable %_ptr_Input_float Input
%11 = OpVariable %_ptr_Function__ptr_Input_float Function
OpStore %11 %2
%12 = OpLoad %_ptr_Input_float %11
%13 = OpLoad %float %12
corresponds to the pseudo-code:
layout(location = 0) in flat float *%2
float %13;
float *%12;
float **%11;
*%11 = %2;
%12 = *%11;
%13 = *%12;
which ultimately, should correspond to:
%13 = *%2;
During rewriting, the pointer %12 is found to be replaceable by %2.
However, when processing the load %13 = *%12, the type of %12's reaching
definition is another float pointer (%2), instead of a float value.
When this happens, we need to continue looking up the reaching definition
chain until we get to a float value or a non-target var (i.e. a variable
that cannot be SSA replaced, like %2 in this case since it is a function
argument).
This PR fixes a bug related to the transformation applicability.
When the OpNot case was implemented, its opcode was not
added to the list of supported bit instructions in IsApplicable.
So, the changes made are the following.
- Add OpNot to the list of supported bit instructions.
- Update the tests.
This commit add support for optimizer to not inline functions with DontInline control flag, so that the [noinline] attribute in HLSL will be useful in DXC SPIR-V generation.
This is part of work of github.com/microsoft/DirectXShaderCompiler/issues/3158
Based on the OpLine spec, an OpLine instruction must be applied to
the instructions physically following it up to the first occurrence
of the next end of block, the next OpLine instruction, or the next
OpNoLine instruction.
```
OpLine %file 0 0
OpNoLine
OpLine %file 1 1
OpStore %foo %int_1
%value = OpLoad %int %foo
OpLine %file 2 2
```
For the above code, the current spirv-opt keeps three line
instructions `OpLine %file 0 0`, `OpNoLine`, and `OpLine %file 1 1`
in `std::vector<Instruction> dbg_line_insts_` of Instruction class
for `OpStore %foo %int_1`. It does not put any line instruction to
`std::vector<Instruction> dbg_line_insts_` of
`%value = OpLoad %int %foo` even though `OpLine %file 1 1` must be
applied to `%value = OpLoad %int %foo` based on the spec.
This results in the missing line information for
`%value = OpLoad %int %foo` while each spirv-opt pass optimizes the
code. We have to put `OpLine %file 1 1` to
`std::vector<Instruction> dbg_line_insts_` of
both `%value = OpLoad %int %foo` and `OpStore %foo %int_1`.
This commit conducts the line instruction propagation and skips
emitting the eliminated line instructions at the end, which are the same
with PropagateLineInfoPass and RedundantLineInfoElimPass. This
commit removes PropagateLineInfoPass and RedundantLineInfoElimPass.
KhronosGroup/glslang#2440 is a related PR that stop using
PropagateLineInfoPass and RedundantLineInfoElimPass from glslang.
When the code in this PR applied, the glslang tests will pass.
If enabled the following targets will be created:
* `${SPIRV_TOOLS}-static` - `STATIC` library. Has full public symbol visibility.
* `${SPIRV_TOOLS}-shared` - `SHARED` library. Has default-hidden symbol visibility.
* `${SPIRV_TOOLS}` - will alias to one of above, based on BUILD_SHARED_LIBS.
If disabled the following targets will be created:
* `${SPIRV_TOOLS}` - either `STATIC` or `SHARED` based on the new `SPIRV_TOOLS_LIBRARY_TYPE` flag. Has full public symbol visibility.
* `${SPIRV_TOOLS}-shared` - `SHARED` library. Has default-hidden symbol visibility.
Defaults to `ON`, matching existing build behavior.
This flag can be used by package maintainers to ensure that all libraries are built as shared objects.
* spirv-val: Allow the ViewportIndex and Layer built-ins when their corresponding SPIR-V 1.5 capabilities are present
* Added tests for OpCapability ShaderViewportIndex and OpCapability ShaderLayer
For some cases, we have DebugDecl invisible to a value assignment, but
the value assignment information is important i.e., debugger cannot inspect
the variable without the information. For example, a parameter of an inlined
function must have its value assignment i.e., argument passing out of its
function scope. If we simply remove DebugDecl because it is invisible to the
argument passing, we cannot inspec the variable.
This PR
- Adds DebugValue for DebugDecl invisible to a value assignment. We use
the value of the variable in the basic block that contains DebugDecl, which is
found by ssa-rewrite. If the value instruction does not dominate DebugDecl,
we use the value of the variable in the immediate dominator of the basic block.
- Checks the visibility of DebugDecl for Phi value assignment based on the
all value operands of the Phi. Since Phi just references multiple values from
multiple basic blocks, scopes of value operands must be regarded as the scope
of the Phi.
The following implementations are introduced:
- Transformation and fuzzer pass for expanding vector reduction.
- Unit tests to cover the instructions with different vector sizes.
Fixes#3768.
This fixes a problem where TransformationInlineFunction could lead to
distinct instructions having identical unique ids. It adds a validity
check to detect this problem in general.
Fixes#3911.
`DebugInfoManager::AddDebugValueIfVarDeclIsVisible()` adds
OpenCL.DebugInfo.100 DebugValue from DebugDeclare only when the
DebugDeclare is visible to the give scope. It helps us correctly
handle a reference variable e.g.,
{ // scope #1.
int foo = /* init */;
{ // scope #2.
int& bar = foo;
...
in the above code, we must not propagate DebugValue of `int& bar` for
store instructions in the scope #1 because it is alive only in
the scope #2.
We have an exception: If the given DebugDeclare is used for a function
parameter, `DebugInfoManager::AddDebugValueIfVarDeclIsVisible()` has
to always add DebugValue instruction regardless
of the scope. It is because the initializer (store instruction) for
the function parameter can be out of the function parameter's scope
(the function) in particular when the function was inlined.
Without this change, the function parameter value information always
disappears whenever we run the function inlining pass and
`DebugInfoManager::AddDebugValueIfVarDeclIsVisible()`.
The validity check during fuzzing and in unit tests is strengthened to
require that every block has its enclosing function as its parent.
TransformationMergeFunctionReturns is fixed so that it ensures parents
are set appropriately.
Fixes#3907.
Currently the validator, when checking an instruction is in the correct
section, always advances the current section. This means if we have an
instruction from a previous section we'll end up reporting it as invalid
in a function definition. This error is confusing.
This CL updates the validator to check if the given opcode is from a
previous layout section before advancing the current section. If it is
from a previous layout section an error is emitted.
1. DebugValue/DebugDeclare references of load/store must not change
the behaviors of the convert-local-access-chains pass
2. We have to properly set the scope and line information of new
instructions made by the convert-local-access-chains pass
Adds a virtual method, GetFreshIds(), to Transformation. Every
transformation uses this to indicate which ids in its protobuf message
are fresh ids. This means that when replaying a sequence of
transformations the replayer can obtain a smallest id that is not in
use by the module already and that will not be used by any
transformation by necessity. Ids greater than or equal to this id
can be used as overflow ids.
Fixes#3851.
The following changes are introduced:
1. Entry block might have more than one predecessor, even if it is not
a selection/loop merge block. However Apply method asserts that
there is only one predecessor. Now, IsApplicable method ensures
that there is only one predecessor.
2. In fuzzer pass we exclude both loop headers and selection headers
as potential exit blocks.
Fixes#3827.
Before this change, the replayer would return a SPIR-V binary. This
did not allow further transforming the resulting module: it would need
to be re-parsed, and the transformation context arising from the
replayed transformations was not available. This change makes it so
that after replay an IR context and transformation context are
returned instead; the IR context can subsequently be turned into a
binary if desired.
This change paves the way for an upcoming PR to integrate spirv-reduce
with the spirv-fuzz shrinker.
TransformationContext now holds a std::unique_ptr to a FactManager,
rather than a plain pointer. This makes it easier for clients of
TransformationContext to work with heap-allocated instances of
TransformationContext, which is needed in some upcoming work.
This transformation, given a constant integer (scalar or vector) C,
constants I and S of compatible type and scalar 32-bit integer constant
N, such that C = I - S*N, adds a loop which subtracts S from I, N
times, creating a synonym for C.
The related fuzzer pass randomly chooses constants to which to add
synonyms using this transformation, and the location where they should
be added.
Fixes#3616.
In preparation for some upcoming work on the shrinker, this PR changes
the interfaces of Fuzzer, Replayer and Shrinker so that all data
relevant to each class is provided on construction, meaning that the
"Run" method can become a zero-argument method that returns a status,
transformed binary and sequence of applied transformations via a
struct.
This makes greater use of fields, so that -- especially in Fuzzer --
there is a lot less parameter passing.
This change introduces various strategies for controlling the manner
in which fuzzer passes are applied repeatedly, including infrastructure
to allow fuzzer passes to be recommended based on which passes ran
previously.
This PR modifies the FactManager methods IdIsIrrelevant and GetIrrelevantIds so
that an id is always considered irrelevant if it comes from a dead block.
Fixes#3733.
Introduces two changes:
- duplicated_exit_region refers to a correct block, regardless of the order
of the blocks in the enclosing function.
- Exclude the case where the continue target is the exit block.
This PR implements part of the add bit instruction synonym transformation.
For now, the implementation covers the OpBitwiseOr, OpBitwiseXor and
OpBitwiseAnd cases.
This PR changes the fact manager so that, when calling some of the
functions in submanagers, passes references to other submanagers if
necessary (e.g. to make consistency checks).
In particular:
- DataSynonymAndIdEquationFacts is passed to the AddFactIdIsIrrelevant
function of IrrelevantValueFacts
- IrrelevantValueFacts is passed to the AddFact functions of
DataSynonymAndIdEquationFacts
The IRContext is also passed when necessary and the calls to the
corresponding functions in FactManager were updated to be valid and
always use an updated context.
Fixes#3550.
This transformation, given the header of a selection construct with
branching instruction OpBranchConditional, flattens it.
Side-effecting operations such as OpLoad, OpStore and OpFunctionCall
are enclosed within smaller conditionals.
It is applicable if the construct does not contain inner selection
constructs or loops, or atomic or barrier instructions.
The corresponding fuzzer pass looks for selection headers and
tries to flatten them.
Needed for the issue #3544, but it does not fix it completely.
In #3636, I missed that the instruction folder may create more than a
single constant per call. Since CCP was only checking whether one
constant had been created after folding, it was wrongly thinking that
the IR had not changed.
Fixes#3738.
Adds a transformation that inserts a conditional statement with a
boolean expression of arbitrary value and duplicates a given
single-entry, single-exit region, so that it is present in each
conditional branch and will be executed regardless of which branch will
be taken.
Fixes#3614.
Motivated by integrating spirv-reduce into spirv-fuzz, so that an
added function can be made smaller during shrinking, this adds support
in spirv-reduce for asking reduction to be restricted to the
instructions of a single specified function.
This PR adds the NestingDepth function to StructuredCFGAnalysis.
This function, given a block id, returns the number of merge
constructs containing it.
This is needed by spirv-fuzz, but it makes sense to add it to
StructuredCFGAnalaysis, which contains related functionalities.
This transformation takes an OpSelect instruction and replaces it with
a conditional branch, selecting the correct value using an OpPhi
instruction.
Fixes part of the issue #3544.
The Vulkan 1.2.152 headers/spec now include Valid Usage IDs (VUID)
for every BuiltIn. This change adds labeling to help aid tracking
the coverage gap in Vulkan targeted validation. This is done with
a script in the Validation Layers that parses the source for VUID
strings, both that there is an implementation and a test for it.
There are 2 main changes:
1. A VUID string is added where applicable. It is wrapped in a function
that at runtimes checks if Vulkan is the target so that other targets
will not be effected as the output error only changes for Vulkan and
the overhead only occurs if there is an error at all.
2. For unit test, a new parameter value was added to allow make sure
that for each VUID there is a matching test. There are cases where the
same unit test checks multiple VUs via the parameter feature of gtest.
For this, I added a custom gMock Matcher to simply loop over a list
of VUID strings
Pointer (if VariablePointers is enabled) to find sets of potential
synonyms.
However, some instructions with these types cannot be used in an OpPhi:
- OpFunction cannot be used as a value
- OpUndef should not be used, because it yields an undefined value for
each use
Fixes#3761.
This transformation takes the id of an OpPhi instruction, of a dead
predecessor of the block containing it and a replacement id of
available to use and of the same type as the OpPhi, and changes
the id in the OpPhi corresponding to the given predecessor.
For example, %id = OpPhi %type %v1 %p1 %v2 %p2
becomes %id = OpPhi %type %v3 %p1 %v2 %p2
if the transformation is given %id, %p1 and %v3, %p1 is a dead block,
%v3 is type type and it is available to use at the end of %p1.
The fuzzer pass randomly decides to apply the transformation to OpPhi
instructions for which at least one of the predecessors is dead
Fixes#3726.
A transformation that replaces the use of an irrelevant id with
another id of the same type.
The related fuzzer pass, for every use of an irrelevant id,
checks whether the id can be replaced in that use by another
id of the same type and randomly decides whether to replace
it.
Fixes#3503.
This PR extends CallGraph with functions to return:
- a list of functions in lexicographical order, with respect to
function calls
- the maximum loop nesting depth that a function can be called from
(computed interprocedurally, e.g. if foo() calls bar() at depth 2
and bar() calls baz() at depth 1, the maximum depth of baz() will
be 3).
When we update OpenCL.DebugInfo.100 lexical scopes e.g., DebugFunction,
we have to replace DebugScope of each instruction that uses the lexical
scope correctly.
A transformation that adds new OpPhi instructions to blocks with >=1
predecessors, so that its value depends on previously-defined ids of
the right type, which are all synonymous. This instruction is also
recorded as synonymous to the others.
The related fuzzer pass still needs to be implemented.
Fixes#3592 .
This change adds the notion of "overflow ids", which can be used
during shrinking to facilitate applying transformations that would
otherwise have become inapplicable due to earlier transformations
being removed.
It is possible that the result of a void function call is used. In case
it is used, we need something that still defines its id after inlining.
We use an undef for that purpose.
Fixes https://github.com/KhronosGroup/SPIRV-Tools/issues/3704
CCP should mark IR changed if it created new constants.
This fixes#3636.
When CCP is simulating statements, it will sometimes successfully fold
an instruction, which laters switches to varying. The initial fold of
the instruction may generate a new constant K.
The problem we were running into is when K never gets propagated to the
IR. Its definition will still exist, so CCP should mark the IR modified
in this case.
In fixing this bug, I noticed that an existing test was suffering from
the same bug. The change also makes PassTest::SinglePassRunAndMatch()
return the result from the pass, so that we can check that the pass
marks the IR modified in this case.
Adds FuzzerPassAddCompositeInserts, which randomly adds new
OpCompositeInsert instructions. Each OpCompositeInsert instruction
yields a copy of an original composite with one subcomponent replaced
with an existing or newly added object. Synonym facts are added for the
unchanged components in the original and added composite, and for the
replaced subcomponent and the object, if possible.
Fixes#2859
For FuzzerPassAddParameters, adds pointer types (that have the storage
class Function or Private) to the pool of available types for new
parameters. If there are no variables of the chosen pointer type, it
invokes TransformationAddLocalVariable / TransformationAddGlobalVariable
to add one.
Part of #3403
In the existing code, ADCE pass does not check DebugScope of an
instruction when it checks the users of each instruction, which results
in removing OpenCL.Debug.100 instructions that are only used by
DebugScope. This commit lets ADCE pass add DebugScope of an instruction
to the live instruction set when the instruction is added to the live
instruction set.
`TransformationAddDeadBlock` did not check whether the existing block
(that will become a selection header) dominates its successor block (that
will become its merge block).
This change adds the check.
Fixes#3690.
Some OpenCL.DebugInfo.100 instructions such as DebugGlobalVariable
and DebugLocalVariable have the Type operand. This commit allows them to
use DebugTypeTemplate for the Type operand.
Improves the code coverage of tests for the following transformations:
1. TransformationAddRelaxedDecoration
2. TransformationReplaceCopyMemoryWithLoadStore
3. TransformationReplaceCopyObjectWithStoreLoad
4. TransformationReplaceLoadStoreWithCopyMemory
5. TransformationReplaceAddSubMulWithCarryingExtended
Support identical predecessors in TransformationPropagateInstructionUp.
A basic block may have multiple identical predecessors as follows:
%1 = OpLabel
OpSelectionMerge %2 None
OpBranchConditional %true %2 %2
%2 = OpLabel
...
This case wasn't supported before.
* No longer blindly add global non-semantic info instructions to global
types and values
* functions now have a list of non-semantic instructions that succeed
them in the global scope
* global non-semantic instructions go in global types and values if
they appear before any function, otherwise they are attached to the
immediate function predecessor in the module
* changed ADCE to use the function removal utility
* Modified EliminateFunction to have special handling for non-semantic
instructions in the global scope
* non-semantic instructions are moved to an earlier function (or full
global set) if the function they are attached to is eliminated
* Added IRContext::KillNonSemanticInfo to remove the tree of
non-semantic instructions that use an instruction
* this is used in function elimination
* There is still significant work in the optimizer to handle
non-semantic instructions fully in the optimizer
`TransformationAddTypeFloat` and `TransformationAddTypeInt` did not check whether the required capabilities were present when adding 16-bit, 64-bit, and 8-bit types.
This change adds these checks in the `IsApplicable` method of each transformation.
Fixes#3669.
`TransformationReplaceIdWithSynonym` is careful to avoid replacing id uses that index into a struct with synonyms because the indices must only be `OpConstant` instructions. However, the check only considered `OpAccessChain` instructions, even though the same restriction applies to `OpInBoundsAccessChain`, `OpPtrAccessChain`, etc.
This change extends the check to include all access chain instructions.
Fixes#3671.
Given an instruction (that may use an OpPhi result from the same block as an input operand), try to clone the instruction into each predecessor block, replacing the input operand with the corresponding OpPhi input operand in each case, if necessary.
Fixes#3458.
Replaces OpIAdd with OpIAddCarry, OpISub with OpISubBorrow, OpIMul with
OpUMulExtended or OpSMulExtended and stores the result into a fresh_id
representing a structure. Extracts the first element of the result into
the original result_id. This value is the same as the result of the
original instruction.
Fixes#3577
This PR changes FuzzerPassOutlineFunctions so that it uses some
transformation that make the TransformationOutlineFunction
transformation applicable in more cases. See the discussion in
#3095 for more details.
Fixes#3095.
The updated OpenCL.DebugInfo.100 spec says that we can use
variable for "Component Count" operand of DebugTypeArray i.e.,
DebugLocalVariable or DebugGlobalVariable. This commit updates spirv-val
based on the spec update.
