The Transformation class tests did not cover the (trivial) ToMessage
methods of each transformation, nor the constructors that take a
protobuf message. This lac of coverage makes it hard to see which more
interesting pieces of code are not covered when looking at coverage
percentages. This change adapts the helper function for applying a
transformation and checking fresh ids so that it turns a
transformation into a protobuf message and back, thus covering
ToMessage and the protobuf constructor for every transformation. The
runtime overhead of doing this is very small.
Fixes https://crbug.com/tint/793
* When a loop has an empty loop construct, the loop construct and
continue construct share the same header so don't disallow the loop
header for the continue construct
Fix dangling phi bug from loop-unroll
When unrolling the following loop:
```
%const0 = OpConstant ...
%const1 = OpConstant ...
...
%LoopHeader = OpLabel
%phi0 = OpPhi %float %const0 %PreHeader %phi1 %Latch
%phi1 = OpPhi %float %const1 %PreHeader %x %Latch
...
%LoopBody = OpLabel
%x = OpFSub %float %phi1 %phi0
...
```
the loop-unroll pass sets the value of `%phi0` as `%phi1` for the second
copy of the loop body. For example, the second copy of
`%x = OpFSub %float %phi1 %phi0` will be
`%y = OpFSub %float %x %phi1`.
Since all phi instructions for inductions will are removed after the
loop unrolling, `%phi1` will be a dead dangling phi.
It happens only for the phi values of the first loop iteration. Replacing those
dangling phis with their initial values fixes this issue.
For example, the second copy of `%x = OpFSub %float %phi1 %phi0` should be
`%y = OpFSub %float %x %const1` because the value of `%phi1` from the
first loop iteration is `%const1`.
This pass converts an internal form of GLSLstd450 Interpolate ops
to the externally valid form. The external form takes the lvalue
of the interpolant. The internal form can do a load of the interpolant.
The pass replaces the load with its pointer. The internal form is
generated by glslang and possibly other frontends for HLSL shaders.
The new pass is called as part of HLSL legalization after all
propagation is complete.
Also adds internal interpolate form to pre-legalization validation
To help ensure that optimizations that do less cautious invalidation
of analyses are implemented correctly, this change adds checks to the
tests of various transformations to ensure that analyses such as
def-use are up to date.
This allows the GPU-AV layer to differentiate between errors with
uniform buffers versus storage buffers and map these to the relevant
VUIDs.
This is a resubmit of a previously reverted commit. The revert was
done as someone erroneously attempted to build the latest validation
layers with a TOT spirv-tools. The validation layers must be built with
their known-good glslang and its known-good spirv-tools and spirv-headers.
* Mark module as modified if convert-to-half removes decorations.
If the convert-to-half pass does not change the body of the function,
but removes decorations, it returns that nothing changed. This is
incorrect, and will be fixed.
Fixes https://github.com/KhronosGroup/SPIRV-Tools/issues/4117
* Update comment for RemoveDecorationsFrom
The existing spirv-opt `DebugInfoManager::AddDebugValueForDecl()` sets
the scope and line info of the new added DebugValue using the scope and
line of DebugDeclare. This is wrong because only a single DebugDeclare
must exist under a scope while we have to add DebugValue for all the
places where the variable's value is updated. Therefore, we have to set
the scope and line of DebugValue based on the places of the variable
updates.
This bug makes
https://github.com/google/amber/blob/main/tests/cases/debugger_hlsl_shadowed_vars.amber
fail. This commit fixes the bug.
* Validate SPV_KHR_workgroup_memory_explicit_layout
* Check if SPIR-V is at least 1.4 to use the extension.
* Check if either only Workgroup Blocks or only Workgroup non-Blocks
are used.
* Check that if more than one Workgroup Block is used, variables are
decorated with Aliased.
* Check layout decorations for Workgroup Blocks.
* Implicitly use main capability if the ...8BitAccess or
...16BitAccess are used.
* Allow 8-bit and 16-bit types when ...8BitAccess and ...16BitAccess
are used respectively.
* Update SPIRV-Headers dependency
Bump it to include SPV_KHR_workgroup_memory_explicit_layout.
* Add option to validate Workgroup blocks with scalar layout
Validate the equivalent of scalarBlockLayout for Workgroup storage
class Block variables from SPV_KHR_workgroup_memory_explicit_layout.
Add option to the API and command line tool.
Propagating the OpLine/OpNoLine to preserve the debug information
through transformations results in integrity check failures because of
the extra line instructions. This commit lets spirv-opt skip the
integrity check when the code contains OpLine or OpNoLine.
When there is an array of strutured buffers, desc sroa will only split
the array, but not a struct type in the structured buffer. However,
the calcualtion of the number of binding a struct requires does not take
this into consideration. This commit will fix that.
Avoid generating OpPhi on void types, and allow the transformation to
take place on regions that produce pointer and sampled image result
ids if such ids are not used after the region.
Fixes#3787.
* validation: tighter validation of multisampled images
- if MS=1, then Sample image operand is required
- Sampling operations are not permitted when MS=1
Fixes#4057, #4058
* Fail early for multisampled image for sampling, dref, gather
* validate StorageImageMultisampled capability
The StorageImageMultisampled capability is required when declaring
an image type with with Multisampled==1 and it's a storage image (Sampled == 2)
Fixes#4061
* Allow SubpassData with Multisampled and Sampled==2
The eliminate dead member pass is written assuming that the index to an
OpAccessChain will be a 32-bit integer or 64-bit integer. That is
changed to work for any width 64-bits or less.
Fixes https://crbug.com/1151727
* Add validation for ray tracing builtins
- Remove existing InstanceId testing that was combined with VertexId in awkward ways.
- Rather than adding a new set of functions for each ray tracing builtin, add
an error table that maps the builtin ID to the 3 common VUIDs for each builtin
(I could see this being extended for other builtins in the future).
- add F32 matrix validation function
- augment existing PrimitiveId validation to verify Input storage class for the
RT stages this is accepted in, and correct the list of stages that it is actually
accepted in (only Intersection / Any Hit / Closest Hit)
* add testing for ray tracing builtins
- remove exising InstanceId testing as it was tangled in with VertexId in now weird ways
and combine it with the new tests
- add testing for ray tracing builtins
- builtins accepted in the same stages and of the same types are combined into test functions
- add some new matrix types to the code generator so they can be used for testing
This instruments ImageRead, ImageWrite and ImageFetch when applied to
texel buffers.
Also add new (but not yet generated) buffer OOB error codes differentiated
for VUID classification.
* BuildModule: optionally avoid adding new OpLine instructions
Fixes#4029 for my use case
* Fix formatting
* Create last_line_inst_ only if doing extra line tracking
* Update to final ray tracing extensions
Drop Provisional from ray tracing enums
sed -ie 's/RayQueryProvisionalKHR/RayQueryKHR/g' **/*
sed -ie 's/RayTracingProvisionalKHR/RayTracingKHR/g' **/*
Add terminator support for SpvOpIgnoreIntersectionKHR and SpvOpTerminateRayKHR
Update deps for SPIRV-Headers
* Update capability dependencies for MeshShadingNV
Accommodate https://github.com/KhronosGroup/SPIRV-Headers/pull/180
MeshShadingNV: enables PrimitiveId, Layer, and ViewportIndex
Co-authored-by: Daniel Koch <dkoch@nvidia.com>
Fix buffer oob instrumentation for matrix refs.
Matrix stride decoration is not on matrix type but is a member decoration
on the enclosing struct type. Also correctly apply matrix stride depending
on row or column major.
spirv-opt has a bug that `DebugInfoManager::AddDebugValueWithIndex()` does not
preserve `Indexes` operands of
[DebugValue](https://www.khronos.org/registry/spir-v/specs/unified1/OpenCL.DebugInfo.100.html#DebugValue).
It has to preserve all of those `Indexes` operands, but it preserves only the first index
operand.
This PR removes `DebugInfoManager::AddDebugValueWithIndex()` and lets the spirv-opt
use `DebugInfoManager::AddDebugValueForDecl()`.
`DebugInfoManager::AddDebugValueForDecl()` preserves the Indexes operand correctly.
in 3943 the new tests should have failed, but didn't due to the AnyVUID
check not handling case with trailing whitespace. Added trimming to handle
it as easily might happen again in future
The front-end language compiler would simply emit DebugDeclare for
a variable when it is declared, which is effective through the variable's
scope. Since DebugDeclare only maps an OpVariable to a local variable,
the information can be removed when an optimization pass uses the
loaded value of the variable. DebugValue can be used to specify the
value of a variable. For each value update or phi instruction of a variable,
we can add DebugValue to help debugger inspect the variable at any
point of the program execution.
For example,
float a = 3;
... (complicated cfg) ...
foo(a); // <-- variable inspection: debugger can find DebugValue of `float a` in the nearest dominant
For the code with complicated CFG e.g., for-loop, if-statement, we
need help of ssa-rewrite to analyze the effective value of each variable
in each basic block.
If the value update of the variable happens only once and it dominates
all its uses, local-single-store-elim pass conducts the same value update
with ssa-rewrite and we have to let it add DebugValue for the value assignment.
One main issue is that we have to add DebugValue only when the value
update of a variable is visible to DebugDeclare. For example,
```
{ // scope1
%stack = OpVariable %ptr_int %int_3
{ // scope2
DebugDeclare %foo %stack <-- local variable "foo" in high-level language source code is declared as OpVariable "%stack"
// add DebugValue "foo = 3"
...
Store %stack %int_7 <-- foo = 7, add DebugValue "foo = 7"
...
// debugger can inspect the value of "foo"
}
Store %stack %int_11 <-- out of "scope2" i.e., scope of "foo". DO NOT add DebugValue "foo = 11"
}
```
However, the initalization of a variable is an exception.
For example, an argument passing of an inlined function must be done out of
the function's scope, but we must add a DebugValue for it.
```
// in HLSL
bar(float arg) { ... }
...
float foo = 3;
bar(foo);
// in SPIR-V
%arg = OpVariable
OpStore %arg %foo <-- Argument passing. Out of "float arg" scope, but we must add DebugValue for "float arg"
... body of function bar(float arg) ...
```
This PR handles the except case in local-single-store-elim pass. It adds
DebugValue for a store that is considered as an initialization.
The same exception handling code for ssa-rewrite is done by this commit: df4198e50e.
This fixes https://github.com/KhronosGroup/SPIRV-Tools/issues/3873.
In the presence of variable pointers, the reaching definition may be
another pointer. For example, the following fragment:
%2 = OpVariable %_ptr_Input_float Input
%11 = OpVariable %_ptr_Function__ptr_Input_float Function
OpStore %11 %2
%12 = OpLoad %_ptr_Input_float %11
%13 = OpLoad %float %12
corresponds to the pseudo-code:
layout(location = 0) in flat float *%2
float %13;
float *%12;
float **%11;
*%11 = %2;
%12 = *%11;
%13 = *%12;
which ultimately, should correspond to:
%13 = *%2;
During rewriting, the pointer %12 is found to be replaceable by %2.
However, when processing the load %13 = *%12, the type of %12's reaching
definition is another float pointer (%2), instead of a float value.
When this happens, we need to continue looking up the reaching definition
chain until we get to a float value or a non-target var (i.e. a variable
that cannot be SSA replaced, like %2 in this case since it is a function
argument).
This PR fixes a bug related to the transformation applicability.
When the OpNot case was implemented, its opcode was not
added to the list of supported bit instructions in IsApplicable.
So, the changes made are the following.
- Add OpNot to the list of supported bit instructions.
- Update the tests.
This commit add support for optimizer to not inline functions with DontInline control flag, so that the [noinline] attribute in HLSL will be useful in DXC SPIR-V generation.
This is part of work of github.com/microsoft/DirectXShaderCompiler/issues/3158
Based on the OpLine spec, an OpLine instruction must be applied to
the instructions physically following it up to the first occurrence
of the next end of block, the next OpLine instruction, or the next
OpNoLine instruction.
```
OpLine %file 0 0
OpNoLine
OpLine %file 1 1
OpStore %foo %int_1
%value = OpLoad %int %foo
OpLine %file 2 2
```
For the above code, the current spirv-opt keeps three line
instructions `OpLine %file 0 0`, `OpNoLine`, and `OpLine %file 1 1`
in `std::vector<Instruction> dbg_line_insts_` of Instruction class
for `OpStore %foo %int_1`. It does not put any line instruction to
`std::vector<Instruction> dbg_line_insts_` of
`%value = OpLoad %int %foo` even though `OpLine %file 1 1` must be
applied to `%value = OpLoad %int %foo` based on the spec.
This results in the missing line information for
`%value = OpLoad %int %foo` while each spirv-opt pass optimizes the
code. We have to put `OpLine %file 1 1` to
`std::vector<Instruction> dbg_line_insts_` of
both `%value = OpLoad %int %foo` and `OpStore %foo %int_1`.
This commit conducts the line instruction propagation and skips
emitting the eliminated line instructions at the end, which are the same
with PropagateLineInfoPass and RedundantLineInfoElimPass. This
commit removes PropagateLineInfoPass and RedundantLineInfoElimPass.
KhronosGroup/glslang#2440 is a related PR that stop using
PropagateLineInfoPass and RedundantLineInfoElimPass from glslang.
When the code in this PR applied, the glslang tests will pass.
