Currently, some instructions will be missing from the list of
ordered_instructions. This will cause issues due to the debug change
which passed the last instruction into subsequent passes.
This CL moves the addition to the ordered list out of the
RegisterInstruction method into AddOrderedInstruction. This method is
called first in ProcessInstruction and the CapabilitiesPass and IdPass
are updated to take an Instruction parameter.
This CL removes the redundant operator name from the error messages in
validate_composites. The operator will be printed on the next line with
the disassembly.
This CL splits the switch in ImagePass into individual validate
functions. The error messages have been updated to drop the
suffix/prefix of the opcode name since it will be displayed in the
disassembly.
This re-implements the -Oconfig=<file> flag to use a new API that takes
a list of command-line flags representing optimization passes.
This moves the processing of flags that create new optimization passes
out of spirv-opt and into the library API. Useful for other tools that
want to incorporate a facility similar to -Oconfig.
The main changes are:
1- Add a new public function Optimizer::RegisterPassesFromFlags. This
takes a vector of strings. Each string is assumed to have the form
'--pass_name[=pass_args]'. It creates and registers into the pass
manager all the passes specified in the vector. Each pass is
validated internally. Failure to create a pass instance causes the
function to return false and a diagnostic is emitted to the
registered message consumer.
2- Re-implements -Oconfig in spirv-opt to use the new API.
Fixes#1731
* Updated folding rules related to vector shuffle to account for the
undef literal value:
* FoldVectorShuffleFeedingShuffle
* FoldVectorShuffleFeedingExtract
* FoldVectorShuffleWithConstants
* These rules would commit memory violations due to treating the undef
literal value as an accessible composite component
Fixes#1727
* If the pass finds any dead branches it can optimize then at the end of
the pass it reorders basic blocks to ensure they satisfy block ordering
requirements
* Added some new tests
* While investigating this issue, found and fixed a non-deterministic
ordering of dominators
* Now the edges used to construct the dominator tree are sorted
according to posorder traversal indices
This CL updates the code to pull a valid instruction for the line number
when outputting a component error in OpVectorShuffle. The error line
isn't the best at this point as it points at the component, but it's
better then a -1 (turning to max<size_t>) that was being output.
The error messages has been updated to better reflect what the error is
attempting to say.
Issue 1719.
With current implementation, the constant manager does not keep around
two constant with the same value but different types when the types
hash to the same value. So when you start looking for that constant you
will get a constant with the wrong type back.
I've made a few changes to the constant manager to fix this. First off,
I have changed the map from constant to ids to be an std::multimap.
This way a single constant can be mapped to mutiple ids each
representing a different type.
Then when asking for an id of a constant, we can search all of the ids
associated with that constant in order to find the one with the correct
type.
When folding an OpVectorShuffle where the first operand is defined by
an OpVectorShuffle, is unused, and is equal to the second, we end up
with an infinite loop. This is because we think we change the
instruction, but it does not actually change. So we keep trying to
folding the same instruction.
This commit fixes up that specific issue. When the operand is unused,
we replace it with Null.
When folding a vector shuffle that feeds another vector shuffle causes
the size of the first operand to change, when other indices have to be
adjusted reletive to the new size.
The function class provides a {Set|Get}Parent call in order to provide
the context to the LoopDescriptor methods. This CL removes the module
from Function and provides the needed context directly to LoopDescriptor
on creation.
This CL removes the context() method from opt::Function. In the places
where the context() was used we can retrieve, or provide, the context in
another fashion.
Currently the IRContext is passed into the Pass::Process method. It is
then up to the individual pass to store the context into the context_
variable. This CL changes the Run method to store the context before
calling Process which no-longer receives the context as a parameter.
- Vulkan 1.0 uses strict layout rules
- Vulkan 1.0 with relaxed-block-layout validator option
enforces all rules except for the relaxation of vector
offset.
- Vulkan 1.1 and later always supports relaxed block layout
Add spot check tests for the relaxed-block-layout scenarios.
Fixes#1697
This CL moves the various validate files into the val/ directory with
the rest of the validation infrastructure. This matches how opt/ is
setup with the passes with the infrastructure.
Other environments do not.
Add tests for OpenGL 4.5 and SPIR-V universal 1.0 to ensure
they still check monotonic layout.
For universal 1.0, we're assuming it otherwise follows Vulkan
rules for block layout.
Fixes#1685
For the instructions which execute after the IdPass check we can provide
the Instruction instead of the spv_parsed_instruction_t. This
Instruction class provides a bit more context (like the source line)
that is not available from spv_parsed_instruction_t.
This CL moves the validation code to the val:: namespace. This makes it
clearer which instance of the Instruction and other classes are being
referred too.
This CL moves the files in opt/ to consistenly be under the opt::
namespace. This frees up the ir:: namespace so it can be used to make a
shared ir represenation.
Currently the utils/ folder uses both spvutils:: and spvtools::utils.
This CL changes the namespace to consistenly be spvtools::utils to match
the rest of the codebase.
Implement rules for row-major matrices
Use ArrayStride and MatrixStride to compute sizes
Propagate matrix stride and RowMajor/ColumnMajor through array members of structs.
Fixes#1637Fixes#1668
Fixes#1618.
Adds a check that validates acceptable exits from case constructs. Case
constructs may only exit to another case construct, the corresponding
merge, an outer loop continue or outer loop merge.
Fixes#1664 : PushConstant with Block follows storage buffer rules
PushConstant variables were being checked with block rules, which are
too strict.
Fixes#1606 : StorageBuffer with Block layout follows buffer rules
StorageBuffer variables were not being checked before.
Fix layout messages: say storage class and decoration
We need to provide more information about storage class and decoration.
The folding routines are currently global functions. They also rely on
data in an std::map that holds the folding rules for each opcode. This
causes that map to not have a clear owner, and therefore never gets
deleted.
There has been a request to delete this map. To implement this, we will
create a InstructionFolder class that owns the maps. The IRContext will
own the InstructionFolder instance. Then the global functions will
become public memeber functions of the InstructionFolder.
Fixes https://github.com/KhronosGroup/SPIRV-Tools/issues/1659.
There are a few locations where we need to handle duplicate types. We
cannot merge them because they may be needed for reflection. When this
happens we need do some extra lookups in the type manager.
The specific fixes are:
1) When generating a constant through `GetDefiningInstruction` accept
and use an id for the desired type of the constant. This will make sure
you get the type that is needed.
2) In Private-to-local, make sure we to update the def-use chains when a
new pointer type is created.
3) In the type manager, make sure that `FindPointerToType` returns a
pointer that points to the given type and not a duplicate type.
4) In scalar replacment, make sure the null constants that are created
are the correct type.
- Add asm/dis test for SPV_KHR_8bit_storage
- validator: SPV_KHR_8bit_storage capabilities enable declaration of 8bit int
TODO:
- validator: ban arithmetic on 8bit unless Int8 is enabled
Covered by https://github.com/KhronosGroup/SPIRV-Tools/issues/1595
Produce better error diagnostics in the CFG validation.
This CL fixes up several issues with the diagnostic error line output
in the CFG validation code. For the cases where we can determine a
better line it has been output. For other cases, we removed the
diagnostic line and the error line number from the results.
Fixes#1657
Revert "Don't merge types of resources"
This reverts commit f393b0e480, but leaves
the tests that were added. Added new test. These test are the so that,
if someone tries the same change I made, they will see the test that
they need to handle.
Don't run remove duplicates in -O and -Os
Romve duplicates was run to help reduce compile time when looking for
types in the type manager. I've run compile time test on three sets
of shaders, and the compile time does not seem to change.
It should be safe to remove it.
The Compact IDs pass can corrupt the CFG, but first the CFG has to
be setup. To do this, a test that builds the CFG, then performs the
compact IDs pass, then checks context consistency.
Fixes https://github.com/KhronosGroup/SPIRV-Tools/issues/1648
When doing reflection users care about the names of the variable, the
name of the type, and the name of the members. Remove duplicates breaks
this because it removes the names one of the types when merging.
To fix this we have to keep the different types around for each
resource. This commit adds code to remove duplicates to look for the
types uses to describe resources, and make sure they do not get merged.
However, allow merging of a type used in a resource with something not
used in a resource. Was done when the non resource type came second.
This could have a negative effect on compile time, but it was not
expected to be much.
Fixes https://github.com/KhronosGroup/SPIRV-Tools/issues/1372.
Fixes#937
Stop std140/430 validation when runtime array is encountered.
Check for standard uniform/storage buffer layout instead of std140/430.
Added validator command line switch to skip block layout checking.
Validate structs decorated as Block/BufferBlock only when they
are used as variable with storage class of uniform or push
constant.
Expose --relax-block-layout to command line.
dneto0 modification:
- Use integer arithmetic instead of floor.
We need this to reduce the test time on Visual Studio debug builds.
AppVeyor times out at 300s for a process.
Artificially lower the local variable limit check for testing purposes.
We don't get much value from using the full 500K+ variables.
Use a limit of 5000 instead.
Fixes https://github.com/KhronosGroup/SPIRV-Tools/issues/1632
Add SPV_ENV_WEBGPU_0 for work-in-progress WebGPU.
val: Disallow OpUndef in WebGPU env
Silence unused variable warnings when !defined(SPIRV_EFFCE)
Limit visibility of validate_instruction.cpp's symbols
Only InstructionPass needs to be visible so all other functions are put
in an anonymous namespace inside the libspirv namespace.
Also add a corresponding check for capabilities in the validator.
Update previously existing test cases where an instruction used to fail
assembling because of a version check, but now they succeed because the
instruction is also guarded by a capability. Now it should assemble.
Add tests to ensure that capabilities are checked appropriately.
The explicitly reserved instructions OpImageSparseSampleProj*
now assemble, but they fail validation.
Fixes#1624
[val] Add extra context to error messages.
This CL extends the error messages produced by the validator to output the
disassembly of the errored line.
The validation_id messages have also been updated to print the line number of
the error instead of the word number. Note, the error number is from the start
of the SPIR-V, it does not include any headers printed in the disassembled code.
Fixes#670, #1581
This CL reverts the revert of 'Disallow array-of-arrays with DescriptorSets when
validating." Other changes have been committed which should aleviate the
AppVeryor resource constraints.
This reverts commit f2c93c6e12.
This CL adds validation to disallow using an array-of-arrays when attached to a
DescriptorSet.
Fixes#1522
Validate Ids before DataRules.
The DataRule validators call FindDefs with the assumption that they
definitions being looked at can be found. This may not be true if we
have not validated identifiers first.
This CL flips the IdPass and DataRulesPass to fix this issue.
Fixes#491
* Basic blocks now have a link to the terminator
* Check all case sepecific rules
* Missing check for branching into the middle of a case (#1618)
Fixes#1120
Checks that all static uses of the Input and Output variables are listed
as interfaces in each corresponding entry point declaration.
* Changed validation state to track interface lists
* updated many tests
* Modified validation state to store entry point names
* Combined with interface list and called EntryPointDescription
* Updated uses
* Changed interface validation error messages to output entry point name
in addtion to ID
We replace the std::vector in the Operand class by a new class that does
a small size optimization. This helps improve compile time on Windows.
Tested on three sets of shaders. Trying various values for the small
vector. The optimal value for the operand class was 2. However, for
the Instruction class, using an std::vector was optimal. Size of "0"
means that an std::vector was used.
Instruction size
0 4 8
Operand Size
0 489 544 684
1 593 487
2 469 570
4 473
8 505
This is a single thread run of ~120 shaders. For the multithreaded run
the results were the similar. The basline time was ~62sec. The
optimal configuration was an 2 for the OperandData and an
std::vector for the OperandList with a compile time of ~38sec. Similar
expiriments were done with other sets of shaders. The compile time still
improved, but not as much.
Contributes to https://github.com/KhronosGroup/SPIRV-Tools/issues/1609.
Try to reduce the amount of disk space used by especially by debug builds,
which may be contributing to AppVeyor failures.
Collapses tests in categories:
- validator
- loop optimizations
- dominator analysis
- linker
Contributes to #1615
- Fix tests for basic group operations (e.g. Reduce) to allow for
new capabilities in SPIR-V 1.3 that enable them.
- Refactor operand capability check to avoid code duplication and
to put all checks that don't need table lookup before any table
lookup.
- Test round trip assembly/disassembly support for extension
SPV_NV_viewport_array2
- Test assembly and validation of decoration ViewportRelativeNV
Fixes#1596
Fixes#1281
* New structured cfg check: all non-construct header blocks'
predecessors must come from within the construct
* New function to calculate blocks in a construct
* Fixed a bug in BasicBlock type bitset
Relaxing check to not consider unreachable predecessors
* Fixing broken common uniform elim test
This CL updates the validate_id code to output the name of the object along with
the id number. There were a few instances which already output the name, this
just extends to all of them. Now, the output should say 123[obj] instead of just
123.
Issue #1581
* Disallow array-of-arrays with DescriptorSets when validating.
This CL adds validation to disallow using an array-of-arrays when attached to a
DescriptorSet.
Fixes#1522
By using forward pointers, we are able to define a struct that has a
pointer to itself. This could be directly or indirectly. The current
implementation of the type manager did not handle this case. There are
three changes that are made in this commit inorder to handle this case:
1) Change the handling of OpTypeForwardPointer
The current handling of OpTypeForwardsPointer is broken if there is a
reference to the pointer before the real definition. When build the
type that contain the forward delared pointer, the type manager will ask
for the type for that ID, and will get a nullptr because it does not
exists. This nullptr is not handleded very well.
The change is to keep track of the incomplete types the first time
through all of the types. An incomplete type is a ForwardPointer or any
type that references an incomplete type.
Then we implement a second pass through the incomplete types that will
complete them.
2) Hashing types.
When hashing a type, we want to uses all of the subtypes as part of the
hash. However, with types that reference them selves, this creates an
infinite recursion. To get around this, we keep track of which types
have been seen on the path from the root type. If we have see the
current type already then we can stop the recursion.
3) Comparing types.
In order to check if two types are the same, we must check that all of
their subtypes are the same as well. This also causes an infinit
recursion. The solution is to stop comparing the subtypes if we are
trying to compare two pointer types that we are already in the middle of
comparing. The ideas is that if the two pointer are different, then in
progress compare will return false itself.
Fixes https://github.com/KhronosGroup/SPIRV-Tools/issues/1578.
We add a new rule to the folding rules to fold an FMix feeding an
extract when the alpha value for the element being extracted is either
0 or 1. In those case, we can simple extract from one of the operands
to the FMix.
With that change the simplification pass completely subsumes the
insert-extract elimination pass. So we remove the insert-extract
elimination passes and replce them with calls to the simplification
pass.
In a follow up PR, we should delete the insert-extract elimination pass.
Contributes to https://github.com/KhronosGroup/SPIRV-Tools/issues/1570.
According to the SPIR-V Spec, section 2.4 Logical Layout of a Module there
should be a single required OpMemoryModel instruction provided. This CL adds
validation that OpMemoryModel is provided to the SPIR-V validator.
Fixes#1207
Removes the limit on scalar replacement for the lagalization passes.
This is done by adding an option to the pass (and command line option)
to set the limit on maximum size of the composite that scalar
replacement is willing to divide.
Fixes#1494.
ADCE does not treat OpCopyMemory as an instruction that references
memory. Because of that stores are removed that should not be.
This change teaches ADCE that OpCopyMemory and OpCopyMemorySize both
loads from and stores to memory. This will keep other stores live when
needed, and will allows ADCE to remove OpCopyMemory instructions as
well.
Fixes https://github.com/KhronosGroup/SPIRV-Tools/issues/1556.
SPV_EXT_shader_viewport_index_layer enables using ViewportIndex
and Layer in vertex and tessellation shaders.
Also, as per the Vulkan spec:
> The ViewportIndex decoration must be used only within vertex,
> tessellation evaluation, geometry, and fragment shaders.
> In a vertex, tessellation evaluation, or geometry shader, any
> variable decorated with ViewportIndex must be declared using
> the Output storage class.
> In a fragment shader, any variable decorated with ViewportIndex
> must be declared using the Input storage class.
Similarly for Layer.
Currently in scalar replacement, we create a new variable for every
memeber of the composite being divided. It is often overkill, because
not all of those members will be used. This change will check which
elements are used and only create variable for the members that are
used.
This reduces the compile time for one set of shader from 248s to 165s.
Part of https://github.com/KhronosGroup/SPIRV-Tools/issues/1494.
The code patterns generated by DXC around function calls can cause many
store to be storing the same value that was just loaded from the same
location:
```
%10 = OpLoad %type %var
OpStore %var %10
```
We want to clean these up very early on because they can cause other
transformations to do a lot of work. For the cases I see, they can be
removed during local-single-block-elim.
For one set of shaders the compile time goes from 248s to 182s. A 26%
improvement.
Part of https://github.com/KhronosGroup/SPIRV-Tools/issues/1494.
We have already disabled common uniform elimination because it created
sequences of loads an entire uniform object, then we extract just a
single element. This caused problems in some drivers, and is just
generally slow because it loads more memory than needed.
However, there are other way to get into this situation, so I've added
a pass that looks specifically for this pattern and removes it when only
a portion of the load is used.
Fixes#1547.
An FClamp instruction forces a values to be within a certain interval.
When the upper or lower bound of the FClamp is a constant and the value
being compared with is a constant, then in some case we can fold the
compared because the entire range is say less than the value.
Fixes https://github.com/KhronosGroup/SPIRV-Tools/issues/1549.
If there is a shader with a variable in the workgroup storage class that
is stored to, but not loadeds, then we know nothing will read those
loads. It should be safe to remove them.
This is implemented in ADCE by treating workgroup variables the same
way that private variables are treated.
Fixes https://github.com/KhronosGroup/SPIRV-Tools/issues/1550.
When doing if-conversion, we do not currently move code out of the side
nodes. The reason for this is that it can increase the number of
instructions that get executed because both side nods will have to be
executed now.
In this commit, we add code to move an instruction, and all of the
instructions it depends on, out of a side node and into the header of
the selection construct. However to keep the cost down, we only do it
when the two values in the OpPhi node compute the same value. This way
we have to move only one of the instructions and the other becomes
unused most of the time. So no real extra cost.
Makes the value number table an alalysis in the ir context.
Added more opcodes to list of code motion safe opcodes.
Fixes#1526.
Previously, the loop class used the terms latch and continue block
interchangeably. This patch splits the two and corrects and tests some
uses of the old uses of GetLatchBlock.
This pass will look for adjacent loops that are compatible and legal to
be fused.
Loops are compatible if:
- they both have one induction variable
- they have the same upper and lower bounds
- same initial value
- same condition
- they have the same update step
- they are adjacent
- there are no break/continue in either of them
Fusion is legal if:
- fused loops do not have any dependencies with dependence distance
greater than 0 that did not exist in the original loops.
- there are no function calls in the loops (could have side-effects)
- there are no barriers in the loops
It will fuse all such loops as long as the number of registers used for
the fused loop stays under the threshold defined by
max_registers_per_loop.
Adds support for spliting loops whose register pressure exceeds a user
provided level. This pass will split a loop into two or more loops given
that the loop is a top level loop and that spliting the loop is legal.
Control flow is left intact for dead code elimination to remove.
This pass is enabled with the --loop-fission flag to spirv-opt.
Track live scalars in VDCE as if they were single element vectors.
Handle the extended instructions for GLSL in VDCE.
Handle composite construct instructions in VDCE.
If one of the operands to an OpVectorTimesScalar instruction is zero,
then the result will be the 0 vector. Currently we do not fold the
insturction unless both operands are constants. This change fixes that.
We also allow folding of OpPhi instructions where the incoming values
are either an OpUndef or the OpPhi instruction itself. As with other
cases, this can be simplified to the OpUndef.
Track live scalars in VDCE as if they were single element vectors.
Handle the extended instructions for GLSL in VDCE.
Handle composite construct instructions in VDCE.
Fixes#1511.
Eliminate unused store to variable if followed by store to same
variable in same block.
Most significantly, this cleans up stores made unused by this pass.
These useless stores can inhibit subsequent optimizations, specifically
LocalSingleStoreElim. Eliminating them makes subsequent optimization more
effective.
The main effect of this pass is to simplify the work done by the SSA
rewriter. It catches many local loads/stores that help speeding up the
work done by the main rewriter.
Introduce a pass that does a DCE type analysis for vector elements
instead of the whole vector as a single element.
It will then rewrite instructions that are not used with something else.
For example, an instruction whose value are not used, even though it is
referenced, is replaced with an OpUndef.
For each function, the analysis determine which SSA registers are live
at the beginning of each basic block and which one are killed at
the end of the basic block.
It also includes utilities to simulate the register pressure for loop
fusion and fission.
The implementation is based on the paper "A non-iterative data-flow
algorithm for computing liveness sets in strict ssa programs" from
Boissinot et al.
* Adds new pass for validating non-uniform group instructions
* Currently on checks execution scope for Vulkan 1.1 and SPIR-V 1.3
* Added test framework
