Changed a couple small parts of the algorithm to reduce time to build
the dominator trees. There should be no visible changes.
Add a depth first search algorithm that does not run a function on
backedges. The check if an edge is a back edge is time consuming, and
pointless if the function run on it is a nop.
Add name annotations to the generated instrumentation code to
make it easier to understand. Example spirv-cross output:
vec4 _140;
if (0u < inst_bindless_direct_read_4(0u, 0u, 1u, uint(_19)))
{
_140 = texture(textures[nonuniformEXT(_19)], inUV);
}
else
{
inst_bindless_stream_write_4(50u, 1u, uint(_19), 0u);
_140 = vec4(0.0);
}
* Improve algorithm to reorder blocks in a function
In dead branch elimination, blocks can end up in a the wrong order, so
there is code to reorder the blocks in structured order. The problem is
that the algorithm to do that is very poor. It involves many searchs in
the function for the correct position to place the block, as well as
moving many block in the vector.
The solution is to write a specialized function in the function class
that will reorder the blocks in structured order. After computing the
structured order, reordering the block can be done in linear time, with
very little overhead.
* spirv-opt: fix copy-propagate-arrays index opti on structs.
As per SPIR-V spec:
OpAccessChain indices must be OpConstant when indexing into a structure.
This optimization tried to remove load cascade. But in some scenario
failed:
```c
cbuffer MyStruct {
uint my_field;
};
uint main(uint index) {
const uint my_array[1] = { my_field };
return my_array[index]
}
```
This is valid as the struct is indexed with a constant index, and then
the array is indexed using a dynamic index.
The optimization would consider the local array to be useless and
generated a load directly into the struct.
* spirv-opt: prevent creation of unused instructions
Copy-propagate-arrays optimization pass would create unused constants,
even if the optimization not completed.
This was caused by the way we handled OpAccessChain squashing: we
only referenced constants, and had to create them upfront.
Fixes#4887
Signed-off-by: Nathan Gauër <brioche@google.com>
Specifically, DebugSourceContinued, DebugCompilationUnit, and
DebugEntryPoint. These instructions are top-level instructions
which do not or may not have a user except for the tool and so
should not be eliminated.
When folding a vector shuffle with an undef literal, it is possible that the
literal is adjusted so that it will then be interpreted as an index into
the input operands. This is fixed by special casing that case, and not
adjusting those operands.
Fixes#4859
Disassembler was called with non-default params, loosing FRIENDLY_NAMES.
This commit changes the call options to allow the spirv-opt to show
friendly names instead of raw-ids. Might be more helpful when reading
the SPIRV-opt output.
Fixes#4882
Signed-off-by: Nathan Gauër <brioche@google.com>
An access chain instruction interpretes its index operands as signed.
The composite insert and extract instruction interpret their index
operands as unsigned, so it is not possible to represent a negative
number.
This commit adds a check to the local-access-chain-convert pass to check
for a negative number in the access chain and to not do the conversion.
Fixes#4856
A recent libc++ roll in Chrome warned of a deprecated copy. We're
still looking if this is a bug in libc++ or a valid warning, but
removing the redundant line is a safe workaround or fix in either
case.
See discussion in https://crrev.com/c/3791771
This reverts commit d18d0d92e5.
This is reverted because it causes a 7X slowdown when legalizing
SPIR-V with NonSemantic.Shader.DebugInfo.100 instructions.
This is due to the creation of very large UseLists for several
heavily used operands for this extension combined with the fact
that the original commit changed the performance of Uselists to O(n).
Fix code that is traversing def-use user structure at the same time
that it is changing it. This is dicey at best and error prone at worst.
This was uncovered making a change to the id_to_user representation.
The fuzzer cretes code with very large array, and scalar replacement
times out. Adding a limit on the size of the composites that will be
split when fuzzing.
Fixes https://crbug.com/oss-fuzz/48630
Arrays do not have to have a size that is known at compile time. It
could be a spec constant. In these cases, treat the array
as if it is arbitrarily long. This commit will treat it like it is an
array of size UINT32_MAX.
Fixes https://crbug.com/oss-fuzz/47397.
If the `instruction` operand in an extended instruction instruction is
too large, it causes undefined behaviour when that value is cast to the
enum for the corresponding set. This is done with the
NonSemanticDebug100 instruction set. We need to avoid the undefined
behaviour.
Fixes#4727
Which functions are processed is determined by which ones are on the
call tree from the entry points before dead code is removed. So it is
possible that a function is process because it is called from an entry
point, but the CFG is not cleaned up because the call to the function
was removed.
The fix is to process and cleanup every function in the module. Since
all of the dead functions would have already been removed in an earlier
step of DCE, it should not make a different in compile time.
Fixes#4731
* Structural dominance introduced in SPIR-V 1.6 rev2
* Changes the structured cfg validation to use structural dominance
* structural dominance is based on a cfg where merge and continue
declarations are counted as graph edges
* Basic blocks now track structural predecessors and structural
successors
* Add validation for entry into a loop
* Fixed an issue with inlining a single block loop
* The continue target needs to be moved to the latch block
* Simplify the calculation of structured exits
* no longer requires block depth
* Update many invalid tests
We currently build the structured order for all nodes reachable from the
loop header when unrolling a loop. However, unrolling only needs the
nodes in the loop and possibly the merge node.
To avoid needless computation, I have implemented a search that will
stop at the merge node.
Fixes#4827
Uses a preprocessor macro to bail out of unrolling loops with large
iteration counts during fuzzing, to reduce the number of
timeouts/memouts that arise.
Related issue: #4728.
The code in `CFG::SplitLoopHeader` assumes the loop header is not the
latch. This leads to it not being able to find the latch block. This
has been fixed, and a test added.
Fixes#4527
If the predecessor blocks are the same, then there is only 1 value for the
OpPhi. The simplition pass will simplify it, and it causes problems for
if-conversion. In these cases, if-conversion can just punt.
Fixes#3554.
There is an assert that verifies that the binary did not change when the
optimizer said that it did not. However, if the input binary is in big endian
format, the optimizer will encode the optimized binary in little endian. This
causes the assert to fail. Since we do not believe that anybody cares about a
big endien formate, we will disable the assert in that case.
Fixes#4722
The Reciprocal function expects a divide-by-0 to return nan,and then Reciprocal will return 0.
Since the divide-by-0 is actually undefined, we will identify this case early, and return 0.
No new tests are needed because we already tests folding divide-by-0.
Fixes#4715
An access chain could have a constant index that is an out of bounds
access. This is valid spir-v, even if it can cause problems at runtime.
However, it is not valid to have an OpCompositeExtract with an out of
bounds access. This means we have to stop local-access-chain-convert
from making that change.
Fixes#4605
This change adds a folding rule which transforms x * y - a and a - x * y
into FMA(x, y, -a) and FMA(-x, y, a), respectively.
While the SPIR-V instruction count remains the same, target instruction
sets typically feature FMA instruction variants that can negate an
operand. Also this transformation may unlock further optimizations which
eliminate the negation.
(Google bug: b/226145988)
* Add move folding for composite instructions
Fold chains of insert into construct
If a chain of OpCompositeInsert instruction write to every element of a
composite object, then we can replace it with an OpCompositeConstruct.
Fold a construct fed by extracts to a single extract
We already fold an OpCompositeConstruct when it is simlpy reconstructing
an object that was decomposed by a series of OpCompositeExtract
instructions. However, we do not do that if that object is an element
of a larger object.
I have updated the rule, so that if the original object is a an element
of a larger object, then the OpCompositeConstruct is replaced with a
single OpCompositeExtract from the larger object.
Fixes#4371.
* Handle 64-bit integers in local access chain convert
The local access chain convert pass does on run on module that have
64-bit integers, even if they have nothing to to with access chains.
This is very limiting because other passes rely on the access chains
being removed. So this commit will add this functionality to the pass.
spirv validation require OpFunctionCall with memory object, usually this
is non issue as all the functions are inlined.
This pass deal with some case for
DontInline function. accesschain input operand would be replaced new
created variable
This reverts commit 671f6e633f.
PR #4783 was reverted because it caused OpenCL CTS failures for clvk.
The was in clspv, which was not adding the no contract decoration when
it was required. This has been fixed in
https://github.com/google/clspv/pull/845. We can now reapply #4783.
Adding Fma instruction can speed up the code. This was requested by
swiftshader, so they do not have to do this analysis themselves. It can
also help reduce the code size, and the work the ICD compilers have to
do.
spread-volatile-semantics pass spreads Volatile semantics for builtin
variables used by certain execution models based on
VUID-StandaloneSpirv-VulkanMemoryModel-04678 and
VUID-StandaloneSpirv-VulkanMemoryModel-04679 (See "Standalone SPIR-V
Validation" section of Vulkan spec "Appendix A: Vulkan Environment for
SPIR-V"). Therefore, shaders without execution model (e.g., used only
for linkage) are not the target of the pass. This commit lets the pass
just return SuccessWithoutChange in that case.