This pass will look for adjacent loops that are compatible and legal to
be fused.
Loops are compatible if:
- they both have one induction variable
- they have the same upper and lower bounds
- same initial value
- same condition
- they have the same update step
- they are adjacent
- there are no break/continue in either of them
Fusion is legal if:
- fused loops do not have any dependencies with dependence distance
greater than 0 that did not exist in the original loops.
- there are no function calls in the loops (could have side-effects)
- there are no barriers in the loops
It will fuse all such loops as long as the number of registers used for
the fused loop stays under the threshold defined by
max_registers_per_loop.
Adds support for spliting loops whose register pressure exceeds a user
provided level. This pass will split a loop into two or more loops given
that the loop is a top level loop and that spliting the loop is legal.
Control flow is left intact for dead code elimination to remove.
This pass is enabled with the --loop-fission flag to spirv-opt.
Track live scalars in VDCE as if they were single element vectors.
Handle the extended instructions for GLSL in VDCE.
Handle composite construct instructions in VDCE.
If one of the operands to an OpVectorTimesScalar instruction is zero,
then the result will be the 0 vector. Currently we do not fold the
insturction unless both operands are constants. This change fixes that.
We also allow folding of OpPhi instructions where the incoming values
are either an OpUndef or the OpPhi instruction itself. As with other
cases, this can be simplified to the OpUndef.
Track live scalars in VDCE as if they were single element vectors.
Handle the extended instructions for GLSL in VDCE.
Handle composite construct instructions in VDCE.
Fixes#1511.
Eliminate unused store to variable if followed by store to same
variable in same block.
Most significantly, this cleans up stores made unused by this pass.
These useless stores can inhibit subsequent optimizations, specifically
LocalSingleStoreElim. Eliminating them makes subsequent optimization more
effective.
The main effect of this pass is to simplify the work done by the SSA
rewriter. It catches many local loads/stores that help speeding up the
work done by the main rewriter.
Introduce a pass that does a DCE type analysis for vector elements
instead of the whole vector as a single element.
It will then rewrite instructions that are not used with something else.
For example, an instruction whose value are not used, even though it is
referenced, is replaced with an OpUndef.
For each function, the analysis determine which SSA registers are live
at the beginning of each basic block and which one are killed at
the end of the basic block.
It also includes utilities to simulate the register pressure for loop
fusion and fission.
The implementation is based on the paper "A non-iterative data-flow
algorithm for computing liveness sets in strict ssa programs" from
Boissinot et al.
* Adds new pass for validating non-uniform group instructions
* Currently on checks execution scope for Vulkan 1.1 and SPIR-V 1.3
* Added test framework
The local-single-store-elim algorithm is not fundamentally bad.
However, when there are a large number of variables, some of the
maps that are used can become very large. These large data structures
then take a very long time to be destroyed. I've seen cases around 40%
if the time.
I've rewritten that algorithm to not use as much memory. This give a
significant improvement when running a large number of shader through
DXC.
I've also made a small change to local-single-block-elim to delete the
loads that is has replaced. That way local-single-store-elim will not
have to look at those. local-single-store-elim now does the same thing.
The time for one set goes from 309s down to 126s. For another set, the
time goes from 102s down to 88s.
GCD MIV test as described in Chapter 3 of "Optimizing Compilers for
Modern Architectures: A Dependence-Based Approach" by Randy Allen, and
Ken Kennedy.
Delta test as described in Figure 3 of "Practical Dependence Testing" by
Gina Goff, Ken Kennedy, and Chau-Wen Tseng from PLDI '91.
* Reworked how execution model limitations are checked
* Now OpFunction checks which entry points call it and checks its
registered limitations instead of building a call stack in the entry
point
* New tests
* Moving function to entry point mapping into VState
Relaxs checks for per-vertex builtin variables. If the builtin
decoration is applied to a variable, then those checks now allow a level
of arraying on the variable before checking the type consistency.
* Allows arrays of variables to be present for the per-vertex variables:
* Position
* PointSize
* ClipDistance
* CullDistance
* Updated tests
Add test for case where OpBranch branches to a value (a function value).
Previous tests only checked a label value (name of a block.).
Update validate_id.cpp to remove the TODO for OpBranch and say that it
is already checked in validate_cfg.cpp
The unordered_set in ADCE that holds all of the live instructions takes
a very long time to be destroyed. In some shaders, it takes over 40% of
the time.
If we look at the unique ids of the live instructions, I believe they
are dense enough make a simple bit vector a good choice for to hold that
data. When I check the density of the bit vector for larger shaders, we
are usually using less than 4 bytes per element in the vector, and
almost always less than 16.
So, in this commit, I introduce a simple bit vector class, and
use it in ADCE.
This help improve the compile time for some shaders on windows by the
40% mentioned above.
Contributes to https://github.com/KhronosGroup/SPIRV-Tools/issues/1328.
For each loop in a function, the pass walks the loops from inner to outer most loop
and tries to peel loop for which a certain amount of iteration can be done before or after the loop.
To limit code growth, peeling will not happen if the growth in code size goes above a configurable threshold.
Provides functionality to perform ZIV and SIV dependency analysis tests
between a load and store within the same loop.
Dependency tests rely on scalar analysis to prove and disprove dependencies
with regard to the loop being analysed.
Based on the 1990 paper Practical Dependence Testing by Goff, Kennedy, Tseng
Adds support for marking loops in the loop nest as IRRELEVANT.
Loops are marked IRRELEVANT if the analysed instructions contain
no induction variables for the loops, i.e. the loops induction
variable is not relevent to the dependence of the store and load.
Adding three rules to fold OpDot (implemented as two).
- When an OpDot has two constants, then fold to the resulting const.
- When one of the inputs is the 0 vector, then fold to zero.
- When one of the inputs is a single 1 with 0s, then rewrite to an
OpCompositeExtract of the appropriate element. This will help find
even more folding opportunities.
Contributes to #709.
According to Vulkan spec 1.1.72:
> The PrimitiveId decoration must be used only within fragment,
> tessellation control, tessellation evaluation, and geometry shaders.
> In a tessellation control or tessellation evaluation shader, any
> variable decorated with PrimitiveId must be declared using the Input
> storage class.
We were enforcing that PrimitiveId can only be used with Output
storage class for TCS and TES before.
From the test case, the slice of the CFG that is interesting for the bug
is
25
|
v
30
|
v
31<-+
| |
v |
34--+
1. In block 25, we have a Phi candidate for %f with arguments
%47 = Phi[%float_0, %0]. This merges %float_0 and a yet unknown
argument from the external loop backedge.
2. We are now processing block 34:
i. The load %35 = OpLoad %f triggers a Phi candidate to be placed in
block 31.
ii. The Phi candidate %50 = Phi needs two arguments. The one coming
from block 30 is %47. But the one coming from block 34 (which we
are now processing and have marked sealed), finds %50 itself as
the reaching def for %f.
3. This wrongfully marks %50 as a copy-of Phi, which ultimately makes
both %47 and %50 copy-of Phis that get eliminated.
Update grammar table generation:
- Get extensions from instructions, not just operand-kinds
- Don't explicitly list extensions that come from the SPIR-V core
grammar or from a KHR extended instruction set grammar.
This makes it easier to support new extensions since the recommended
extension strategy is to add instructions to the core grammar file.
Also, test the validator has trivial support for passing through
the extensions SPV_NV_shader_subgroup_partitioned and
SPV_EXT_descriptor_indexing.
Migrating to unified grammar means we sometimes have two fields
for a certain feature: version and extensions. It means the feature
in question can be used either in SPIR-V of advanced-enough
versions or in any SPIR-V with with the specified extensions.
Validator now respects the above rules.
At every definition of a builtin id, run at-reference-check rules on the
defining instruction as well.
Previosly the validation was missing the case when invalid storage class
was defined in the instruction which defines the built-in, and not in
the instruction which references the built-in.
Refactored validate built-ins to make
GetExecutionModels(entry_point)
and
GetExecutionModes(entry_point)
available in validation state.
Entry points are allowed to have multiple execution modes and execution
models.
Finished the last missing feature in Vulkan built-ins validation:
FragDepth requires DepthReplacing.
Currently OpImageTexelPointer operations are treat like a use of the
pointer, but it does
not look for the memory being referenced to make sure stores are not
removed.
This change teaches it so identify the memory being accessed, and
treats it as if that memory is loaded.
Fixes to #1445.
OpImageTexelPointer acts like a special kind of load. It is not an
array load, but it also cannot be removed the same way a regular
load can. The type of propagation that needs to be done is similar
to what we do for arrays, so I want to merge that code into that
optmization.
Contributers to #1445.
