A recent libc++ roll in Chrome warned of a deprecated copy. We're
still looking if this is a bug in libc++ or a valid warning, but
removing the redundant line is a safe workaround or fix in either
case.
See discussion in https://crrev.com/c/3791771
* spirv-as: Avoid overflow when parsing exponents on hex floats
When an exponent is so large that it would overflow the int
type in the parser, saturate the exponent.
This allows extremely large exponents, and saturates
to infinity when the exponent is positive, and zero when the exponent
is negative.
Fixes#4721.
* Avoid unexpected narrowing conversions from arithmetic operations
Co-authored-by: Alastair F. Donaldson <alastair.donaldson@imperial.ac.uk>
Excessive whitespace can lead to stack overflow during parsing as each
character of skipped whitespace involves a recursive call. An
iterative solution avoids this.
Fixes#4729.
This reverts commit d18d0d92e5.
This is reverted because it causes a 7X slowdown when legalizing
SPIR-V with NonSemantic.Shader.DebugInfo.100 instructions.
This is due to the creation of very large UseLists for several
heavily used operands for this extension combined with the fact
that the original commit changed the performance of Uselists to O(n).
Fix code that is traversing def-use user structure at the same time
that it is changing it. This is dicey at best and error prone at worst.
This was uncovered making a change to the id_to_user representation.
Fixes https://crbug.com/oss-fuzz48578
* Adds structural reachability to basic blocks
* calculated in same manner as reachability, but using structural
successors
* Change structured CFG validation to use structural reachability
instead of reachability
* Fix some invalid reducer cases
The fuzzer cretes code with very large array, and scalar replacement
times out. Adding a limit on the size of the composites that will be
split when fuzzing.
Fixes https://crbug.com/oss-fuzz/48630
Arrays do not have to have a size that is known at compile time. It
could be a spec constant. In these cases, treat the array
as if it is arbitrarily long. This commit will treat it like it is an
array of size UINT32_MAX.
Fixes https://crbug.com/oss-fuzz/47397.
If the `instruction` operand in an extended instruction instruction is
too large, it causes undefined behaviour when that value is cast to the
enum for the corresponding set. This is done with the
NonSemanticDebug100 instruction set. We need to avoid the undefined
behaviour.
Fixes#4727
Which functions are processed is determined by which ones are on the
call tree from the entry points before dead code is removed. So it is
possible that a function is process because it is called from an entry
point, but the CFG is not cleaned up because the call to the function
was removed.
The fix is to process and cleanup every function in the module. Since
all of the dead functions would have already been removed in an earlier
step of DCE, it should not make a different in compile time.
Fixes#4731
* ANGLE builds with -Werror,-Wunreachable-code-loop-increment which had
a problem with grabbing the first construct in a loop
* Change the code to just use begin instead
* Structural dominance introduced in SPIR-V 1.6 rev2
* Changes the structured cfg validation to use structural dominance
* structural dominance is based on a cfg where merge and continue
declarations are counted as graph edges
* Basic blocks now track structural predecessors and structural
successors
* Add validation for entry into a loop
* Fixed an issue with inlining a single block loop
* The continue target needs to be moved to the latch block
* Simplify the calculation of structured exits
* no longer requires block depth
* Update many invalid tests
When the `SPV_BINARY_TO_TEXT_OPTION_PRINT` option is specified, `spvtext` will not be created (see 37d2396cab/source/disassemble.cpp (L117)), and the attempt to dereference into its members (`spvtext->str` and `spvtext->length`) results in segmentation fault.
This is fixed by first checking if `spvtext` is nulll.
Co-authored-by: Steven Perron <stevenperron@google.com>
We currently build the structured order for all nodes reachable from the
loop header when unrolling a loop. However, unrolling only needs the
nodes in the loop and possibly the merge node.
To avoid needless computation, I have implemented a search that will
stop at the merge node.
Fixes#4827
Uses a preprocessor macro to bail out of unrolling loops with large
iteration counts during fuzzing, to reduce the number of
timeouts/memouts that arise.
Related issue: #4728.
The code in `CFG::SplitLoopHeader` assumes the loop header is not the
latch. This leads to it not being able to find the latch block. This
has been fixed, and a test added.
Fixes#4527
If the predecessor blocks are the same, then there is only 1 value for the
OpPhi. The simplition pass will simplify it, and it causes problems for
if-conversion. In these cases, if-conversion can just punt.
Fixes#3554.
There is an assert that verifies that the binary did not change when the
optimizer said that it did not. However, if the input binary is in big endian
format, the optimizer will encode the optimized binary in little endian. This
causes the assert to fail. Since we do not believe that anybody cares about a
big endien formate, we will disable the assert in that case.
Fixes#4722
The Reciprocal function expects a divide-by-0 to return nan,and then Reciprocal will return 0.
Since the divide-by-0 is actually undefined, we will identify this case early, and return 0.
No new tests are needed because we already tests folding divide-by-0.
Fixes#4715
An access chain could have a constant index that is an out of bounds
access. This is valid spir-v, even if it can cause problems at runtime.
However, it is not valid to have an OpCompositeExtract with an out of
bounds access. This means we have to stop local-access-chain-convert
from making that change.
Fixes#4605
A std::set is used instead of std::vector, where the elements are
ordered by member index first. Decorations for fields are now looked up
by going over the range of decorations for the member only, instead of
the whole set.
In an ANGLE test that generates a struct with 4096 members, validation
goes down from ~140ms to ~90ms. On debug builds, the difference is more
pronounced, going down from ~2.5s to ~600ms.
This change adds a folding rule which transforms x * y - a and a - x * y
into FMA(x, y, -a) and FMA(-x, y, a), respectively.
While the SPIR-V instruction count remains the same, target instruction
sets typically feature FMA instruction variants that can negate an
operand. Also this transformation may unlock further optimizations which
eliminate the negation.
(Google bug: b/226145988)
* Add move folding for composite instructions
Fold chains of insert into construct
If a chain of OpCompositeInsert instruction write to every element of a
composite object, then we can replace it with an OpCompositeConstruct.
Fold a construct fed by extracts to a single extract
We already fold an OpCompositeConstruct when it is simlpy reconstructing
an object that was decomposed by a series of OpCompositeExtract
instructions. However, we do not do that if that object is an element
of a larger object.
I have updated the rule, so that if the original object is a an element
of a larger object, then the OpCompositeConstruct is replaced with a
single OpCompositeExtract from the larger object.
Fixes#4371.
* Handle 64-bit integers in local access chain convert
The local access chain convert pass does on run on module that have
64-bit integers, even if they have nothing to to with access chains.
This is very limiting because other passes rely on the access chains
being removed. So this commit will add this functionality to the pass.
spirv validation require OpFunctionCall with memory object, usually this
is non issue as all the functions are inlined.
This pass deal with some case for
DontInline function. accesschain input operand would be replaced new
created variable
- Add assembler/disassembler support
- Add validator support
Signed-off-by: Kevin Petit <kevin.petit@arm.com>
Change-Id: Iffcedd5d5e636a0e128a5906ffe634dd85727de1
This reverts commit 671f6e633f.
PR #4783 was reverted because it caused OpenCL CTS failures for clvk.
The was in clspv, which was not adding the no contract decoration when
it was required. This has been fixed in
https://github.com/google/clspv/pull/845. We can now reapply #4783.
* linker: Recalculate interface variables
By resolving extern symbols Entry Points might access variables they
hadn't declared before.
* test/linker: add test to verify linked spir-vs importing functions validate
Without the fix Validate will complain about:
"ERROR: 9: Interface variable id <5> is used by entry point 'bar' id <1>, but is not listed as an interface\n %5 = OpVariable %_ptr_Input_v3uint Input\n"
Adding Fma instruction can speed up the code. This was requested by
swiftshader, so they do not have to do this analysis themselves. It can
also help reduce the code size, and the work the ICD compilers have to
do.
In the installed file
/usr/lib64/cmake/SPIRV-Tools/SPIRV-ToolsTarget.cmake, occurences of
librt in the INTERFACE_LINK_LIBRARIES property are incorrect. The
property contains the absolute path to librt. In most situations, this
produces no problem. But when building in a sysroot, which is commonly
done when cross-compiling, the absolute path breaks dependent projects.
For example, when building spirv-tools using the Chrome OS SDK, and
targeting the board 'volteer', where the build sysroot is
'/build/volteer', the file includes this line
INTERFACE_LINK_LIBRARIES "/build/volteer/usr/lib64/librt.so"
when it should instead say
INTERFACE_LINK_LIBRARIES "rt"
The CMake documentation agrees [1]:
Note that it is not advisable to populate the
INTERFACE_LINK_LIBRARIES of a target with absolute paths to
dependencies. That would hard-code into installed packages the
library file paths for dependencies as found on the machine the
package was made on.
[1] https://cmake.org/cmake/help/latest/prop_tgt/INTERFACE_LINK_LIBRARIES.html
* Fix gen_build_version on Windows
The paths used in the gen_build_version script are causing some failures
in downstream builds. Switch to using the location of the CHANGES file
rather than the ".." parent directory workaround.
* Update other build files
The code accidentally expected OpTypeFunction operand count to match.
This is fixed so that OpTypeFunction instructions with different operand
counts are considered not matching.
Currently, the diff tool matches types bottom up, so on every
instruction it expects to know if its operands are already matched or
not. With cyclical references, it cannot know that. Type matching
would need significant rework to be able to support such a use case; for
example, it may need to maintain a set of plausable matches between type
pointers that are forward-referenced, and potentially back track when
later the types turn out to be incompatible.
In this change, OpTypeForwardPointer is supported in the more common and
trivial case. Firstly, forwarded type pointers are only matched if they
have they have the same storage class and point to the same type opcode:
- In the presence of debug info, matching is done only if the names are
unique in both src and dst.
- In the absence of debug info, matching is done only if there is only
one possible matching.
Fixes: #4754
spread-volatile-semantics pass spreads Volatile semantics for builtin
variables used by certain execution models based on
VUID-StandaloneSpirv-VulkanMemoryModel-04678 and
VUID-StandaloneSpirv-VulkanMemoryModel-04679 (See "Standalone SPIR-V
Validation" section of Vulkan spec "Appendix A: Vulkan Environment for
SPIR-V"). Therefore, shaders without execution model (e.g., used only
for linkage) are not the target of the pass. This commit lets the pass
just return SuccessWithoutChange in that case.
In preparation for supporting OpTypeForwardPointer, which adds more
usages like this. This change refactors common code used to group
instructions and match the groups.
Clang added -Wunqualified-std-cast-call in
https://reviews.llvm.org/D119670, which warns on unqualified std::move
and std::forward calls. This change qualifies these calls to allow the
project to build on HEAD Clang -Werror.
If the body of the module does not have any ids change, compact ids will
not change the id bound. This can cause problems because the id bound
could be much higher than the largest id in that is used. It should be
reset any time it is not the larger id used + 1.
Fixes#4604
When folding a vector shuffle feeding a vector shuffle, we do not
propagate an 0xFFFFFFFF, which has a special meaning, correctly. We
adjust the value making it lose it meaning as an undefined value.
Fixes#4581
CCP does not want to fold an instruction unless it folds to a constant.
There is an asser to check for this. The question if a spec constant
counts as a constant. The constant folder considers a spec constant a
constand, but CCP does not. I've fixed the assert in CCP to match what
the folder does. It should not require any new changes to CCP.
Swift shader needs a way to inline all functions, even those marked as
DontInline. See https://github.com/KhronosGroup/SPIRV-Tools/pull/4471.
This implements the suggestion I made in the PR. We add a pass that
will remove the DontInline function control, so that the inlining passes
will inline them.
SwiftShader will still have to modify their code to add this pass before
the other passes are run.
The function `BuildInvalideAnalyses` will be rebuilt for every analysis that
has been requested, but it is not necessary. It also can cause problems
because if the CFG needs to be rebuilt, so do the dominator trees.
This change will make the functionality match the description of the
function.
* Optimize DefUseManager allocations
Saves around 30-35% of compilation time.
For inst->use_ids, use a pool linked list instead of allocating vectors for every instruction. For inst->uses, use a "PooledLinkedList"' -- a linked list that has shared storage for all nodes. Neither re-use nodes, instead we do a bulk compaction operation when too much memory is being wasted (tuneable).
Includes separate PooledLinkedList templated datastructure, a very special case construct, but split out to make the code a little easier to understand.
Incrementally compute the hash instead of collecting words
Avoids allocating temporary space in a std::vector and std::u32string, and making three passes over all the hashed data.
Switch to using std::vector to prevent processing duplicates instead of std::unordered_set: avoids an allocation/deletion every call to ComputeHashValue, and ends up faster due to much better cache behaviour and smaller constant-factor when searching the (generally very small) list.
In my test case, made Type::HashValue go from 7.5% of compilation time to .5%
Previously, array sizes were presumed to be OpConstant, which is not
necessarily true. This change ensures OpSpecConstant array sizes as
matched exactly, instead of taken as OpConstant and matched by value.
* Reimplement LCS used by spirv-diff
Two improvements are made to the LCS algorithm:
- The LCS algorithm is reimplemented to use a std::stack instead of
being recursive. This prevents stack overflow in the LCSTest.Large
test.
- The LCS algorithm uses an NxM table. Previously, entries of this
table were {size_t, bool, bool}, which is now packed in 32 bits. The
first entry can assume a maximum value of min(N, M), which
realistically for SPIR-V diff will not be larger than 1 billion
instructions. This reduces memory usage of LCS by 75%.
This partially reverts 845f3efb8a and
enables LCS tests.
* Stabilize the output of spirv-diff
std::map is used instead of std::unordered_map to ensure the output of
spirv-diff is identical everywhere.
This partially reverts 845f3efb8a and
enables spirv-diff tests.
Scalar replacement generates a null when there value for a member will
not be used. The null is used to make sure things are
deterministic in case there is an error.
However, some type cannot be null, so we will change that to use undef.
To keep the code simpler we will always use the undef.
Fixes#3996
spirv-diff is a new tool that produces diff-style output comparing two
SPIR-V modules. The instructions between the src and dst modules are
matched as best as the tool can, and output is produced (in src
id-space) that shows which instructions are removed in src, added in dst
or modified between them. The order of instructions are not retained.
Matching instructions between two SPIR-V modules is not trivial, and
thus a number of heuristics are applied in this tool. In particular,
without debug information, it's hard to match functions as they can be
reordered. As such, this tool is primarily useful to produce the diff
of two SPIR-V modules derived from the same source.
This tool can be useful in a number of scenarios:
- Compare the SPIR-V before and after modifying a shader
- Compare the SPIR-V produced from a shader before and after compiler
codegen changes.
- Compare the SPIR-V produced from a shader before and after some
transformation or optimization.
- Compare the SPIR-V produced from a shader with different compilers.
The handling of the RayQueryKHR type is not complete in the type
manager. The tests were not picking this up. I've added a test to make
sure that the `GenerateAllTypes` function actually does generate all of
the types. Once it is added there other tests should pick up on the
other parts that were missing.
Add a pass to spread Volatile semantics to variables with SMIDNV,
WarpIDNV, SubgroupSize, SubgroupLocalInvocationId, SubgroupEqMask,
SubgroupGeMask, SubgroupGtMask, SubgroupLeMask, or SubgroupLtMask BuiltIn
decorations or OpLoad for them when the shader model is the ray
generation, closest hit, miss, intersection, or callable shaders. This
pass can be used for VUID-StandaloneSpirv-VulkanMemoryModel-04678 and
VUID-StandaloneSpirv-VulkanMemoryModel-04679 (See "Standalone SPIR-V
Validation" section of Vulkan spec "Appendix A: Vulkan Environment for
SPIR-V").
Handle variables used by multiple entry points:
1. Update error check to make it working regardless of the order of
entry points.
2. For a variable, if it is used by two entry points E1 and E2 and
it needs the Volatile semantics for E1 while it does not for E2
- If VulkanMemoryModel capability is enabled, which means we have to
set memory operation of load instructions for the variable, we
update load instructions in E1, but do not update the ones in E2.
- If VulkanMemoryModel capability is disabled, which means we have
to add Volatile decoration for the variable, we report an error
because E1 needs to add Volatile decoration for the variable while
E2 does not.
For the simplicity of the implementation, we assume that all functions
other than entry point functions are inlined.
C++20 automatically adds reversed versions of operator overloads for
consideration; in this particular instance this results in infinite
recursion, which has now been pointed out elsewhere as a known issue
when migrating to C++20. Here we just disable one of the overloads in
C++20 mode and let the auto-reversing take care of it for us.
* linker: Address conversion error introduced in earlier rework
Also rework the code slightly to first compute the new ID bound and
validate it, and only then, offset all existing IDs.
This makes those two steps clearer, and avoids potentially overflowing
the IDs within a module (even if that would have been caught later on).
Fixes: c3849565 ("Linker improvements (#4679)")
Fixes https://github.com/KhronosGroup/SPIRV-Tools/issues/4684
* test/linker: Disable IdsLimit tests for now
They are taking too long to run and results in the CI jobs timing out.
* test/linker: Code factorisation and small tweaks
* linker: Do not fail when going over limits
The limits are minima and implementations or APIs might support higher
limits, so just warn the user about it. And only check for the limits
right before emitting the binary, as limits might change earlier when
removing duplicate instructions, function prototypes, etc.
The only check performed right before merging, is making sure the ID
bound will not overflow the 32 bits following the merge.
Also, use the defines for the limits instead of hard-coding them.
* linker: Require a memory model in each input module
The existing code could run into weird situation. For example, if the
first module had no memory model, it would not emit any memory model
(sort of reasonable) and would accept without complains all possible mix
from later modules as it would not verify them.
* linker: Replace hex version with SPV_SPIRV_VERSION_WORD
* linker: Error out when linking together different versions
Fixes https://github.com/KhronosGroup/SPIRV-Tools/issues/4135
* tools/linker: Do not write to disk if linking failed
Also, do not consider warnings as errors.
* tools/linker: Fix formatting in help message
* tools/linker: Further clarify the use of --target-env
Also update the text for the default version to reflect the change made
in 7d768812 ("Basic support for SPIR-V 1.6 (#4663)").
* PassManager: Print errors occurring during disassembly
Otherwise one could be greeted by the following text when running
spirv-opt withe the `--print-all` flag:
; IR before pass wrap-opkill
; IR before pass eliminate-dead-branches
; IR before pass merge-return
With this commit, one will instead get:
error: line 143: Invalid opcode: 400
warning: line 0: Disassembly failed before pass wrap-opkill
error: line 143: Invalid opcode: 400
warning: line 0: Disassembly failed before pass eliminate-dead-branches
error: line 143: Invalid opcode: 400
warning: line 0: Disassembly failed before pass merge-return
* PassManager: Use the right target environment when disassembling
Disassembly would fail if features from a newer version of SPIR-V than
1.2 were used.
The comment in `Array::GetExtraHashWords` is misleading because getting
the hash words is split up between the generic `Type::GetHashWords` and
the type specific `Type::GetExtraHashWords`. While `IsSameImpl` is
self-contained. Removing the comment since it is misleading and no
comment is really needed.
Fixes#3248
Ensures that instruction's opcode is set to something default when
parsing the module with --preserve-numeric-ids enabled. This avoids
uninitialized accesses and knock-on buffer overflows.
Fixes#4672.
For a shader input/output interface variable of structure type:
If the structure has BuiltIn members, then the structure type
must be Block decorated.
Otherwise, the variable, or the struct members must have locations,
but nothing can have both a location be a BuiltIn.
Implements validation needed to reject the example in
https://github.com/KhronosGroup/SPIRV-Registry/issues/134
* Basic support for SPIR-V 1.6
* Update SPIRV-Headers deps
* Add new environment enum for SPIR-V 1.6
* Make default environment 1.6 for most tools
* Update tests
* Disallow conditional branch with duplicate labels
* Disallow Dim=Buffer with sampled images
* Do not require the non-semantic extension after SPIR-V 1.5
The pass to remove the nonsemantic information and instructions
is used for drivers or tools that may not support them. Debug
information was only partially handle, which is causing a
problem. We need to either fully remove debug information or
not remove it all. Since I can see it being useful to keep the
debug information even when the nonsemantic instructions are
removed, I propose we do not remove debug info.
Fixes https://github.com/KhronosGroup/SPIRV-Tools/issues/4269
In https://github.com/KhronosGroup/SPIRV-Tools/pull/3110, the strip reflect
pass was changed to also remove all explicitly nonsemantic instructions. This
makes it so that the name of the pass no longer reflects what the pass actually
does. This change renames the pass so that it reflects what the pass actaully does.
The upcoming spirv-diff tool also outputs disassembly, although in a
per-instruction basis. This change refactors the disassembler code to
support such a use case.
The change in
commit 4ac8e5e541
Author: Greg Fischer <greg@lunarg.com>
Date: Wed Sep 15 12:38:34 2021 -0600
Add preserve_interface mode to aggressive_dead_code_elim (#4520)
Broke the C++ ABI for spirv-tools shared libraries on Linux, for not a great reason.
Restore the previous ABI.
* Fix endianness of string literals
To get correct and consistent encoding and decoding of string literals
on big-endian platforms, use spvtools::utils::MakeString and MakeVector
(or wrapper functions) consistently for handling string literals.
- add variant of MakeVector that encodes a string literal into an
existing vector of words
- add variants of MakeString
- add a wrapper spvDecodeLiteralStringOperand in source/
- fix wrapper Operand::AsString to use MakeString (source/opt)
- remove Operand::AsCString as broken and unused
- add a variant of GetOperandAs for string literals (source/val)
... and apply those wrappers throughout the code.
Fixes #149
* Extend round trip test for StringLiterals to flip word order
In the encoding/decoding roundtrip tests for string literals, include
a case that flips byte order in words after encoding and then checks for
successful decoding. That is, on a little-endian host flip to big-endian
byte order and then decode, and vice versa.
* BinaryParseTest.InstructionWithStringOperand: also flip byte order
Test binary parsing of string operands both with the host's and with the
reversed byte order.
Ensures that when an attempt to read a floating-point value from an
input stream fails, the recieving variable for the read does not end up
uninitialised.
Fixes OSS-Fuzz:40432
Fixes#4644
Currently if an ID overflow occurs, spirv-opt (and other users of
IRContext) emits a warning and starts returning 0 when fresh ids are
requested. This tends to lead to crashes - such as null pointer
exceptions. When these arise during fuzzing they lead to auto-reported
bugs.
This change uses an ifdef guard to instead gracefully exit as soon as an
ID overflow occurs when the build is a fuzzing build.
Related issue: #4539.
This prevents CCP from making constant -> constant transitions when
evaluating instruction values. In this case, FClamp is evaluated twice.
On the first evaluation, if computes FClamp(0.5, 0.5, -1) which returns
-1. On the second evaluation, it computes FClamp(0.5, 0.5, VARYING)
which returns 0.5.
Both fold() computations are correct given the semantics of FClamp() but
this causes a lateral transition in the constant lattice which was not
being considered VARYING by CCP.
Along with OpDecorate, also clone the OpDecorateString instructions for
variables created in the descriptor scalar replacement pass.
Fixesmicrosoft/DirectXShaderCompiler#3705
* https://github.com/KhronosGroup/Vulkan-Docs/issues/666 clearly
specified that interfaces do not require an input if there is an
associated output
* ADCE can now remove unused input variables (though they are kept if
the preserve interfaces option is used)
Fixes#4469
* Checks that decorations only usable with structure members are not
used by OpDecorate or OpDecorateId
* Checks that decorations not allowed on structure members are not used
with OpMemberDecorate
* Checks decoration targets for most core decorations
* Performs some Vulkan specific validation on deorations
* Add wasm build
* Run wasm ci on push
* Add copyright notice to wasm files
* [wasm] Update Emscripten
* [wasm] Change global lambda to regular function
* [wasm] Show detected core count during build
* [wasm] Set JS version from CHANGES, GITHUB_RUN_ID
Also remove custom docker emscripten build with brotli, as not used
* [wasm] Change github actions to use npm-publish
* [wasm] Us docker-compose up for CI
* [wasm] pass GITHUB_RUN_ID to docker
* [wasm] Change GITHUB_RUN_ID to GITHUB_RUN_NUMBER
* [wasm] Fix GITHUB_RUN_NUMBER in docker-compose.yml
If the ids overflow when creating an integer constant in the ir_builder, there will be a nullptr dereference. This is happening from inside merge return.
We need to propagate the error up, and make sure it is handled appropriately.
In #3404 a logical && was replaced with a bitwise & to ensure that
both side-effecting arguments were evaluated. However, this leads to
warnings from some compilers (leading to the OSS-Fuzz build breaking,
in particular).
This change reworks the relevant code so that both arguments to the
logical && are evaluated into temporaries.
Consider the new test case. The conditional branch in the continue
block is never marked as live. However, `IsDead` will say it is not
dead, so it does not get deleted. Because it was never marked as live,
`%false` was not mark as live either, but it gets deleted. This results
in invalid code.
To fix this properly, we had to reconsider how branches are handle. We
make the following changes:
1) Terminator instructions that are not branch or OpUnreachable must be
kept, so they are marked as live when initializing the worklist.
2) Branches and OpUnreachable instructions are marked as live if
a) the block does not have a merge instruction and another instruction
in the block is marked as live, or
b) the merge instruction in the same block is marked as live.
3) Any instruction that is not marked as live is removed.
4) If a terminator is to be removed, an OpUnreachable is added. This
happens when the entire block is dead, and the block will be removed.
The OpUnreachable is generated to make sure the block still has a
terminator, and is valid.
Fixes https://github.com/KhronosGroup/SPIRV-Tools/issues/4509.
The generator ID is located in the upper 16 bits. The lower bits are
reserved for a version number.
Co-authored-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
When checking the OpBranchConditional for selection headers,
we intend to register both the true and false targets.
Short circuiting was getting in the way.
Co-authored-by: Steven Perron <stevenperron@google.com>
Spirv-opt has not had to handle module with function declarations. This
lead many passes to assume that every function has a body. This is not
always true. This commit will modify a number of passes to handle
function declarations.
Fixes https://github.com/KhronosGroup/SPIRV-Tools/issues/4443
