* Clone opencl.debuginfo.100 grammar from debuginfo grammar
Update version number to 200 revision 2
* Apply content from OpenCL.DebugInfo.100 extension text
* Rename grammar file
* Support OpenCL.DebugInfo.100 extended instructions
Add support for prefixing operand type names, to disambiguate
them between different instruction sets.
* Add tests for OpenCL.DebugInfo.100
* Support lookup of OpenCL.DebugInfo.100 extinst
* Add tests for enum values
* Recognize 2017-2019 as copyright date range
* Android.mk: support OpenCL.DebugInfo.100 extended instruction set
Also, stop generating core instruction tables for non-unified1 versions
of the grammar.
* Imported entity operand type is concrete
* Bazel: Suppoort OpenCL.DebugInfo.100
* BUILD.gn: Support OpenCL.DebugInfo.100
In the context of SPIR-V 1.4 or higher, global variables cannot be
used by an instruction unless they are listed in the interface of all
entry points that might invoke the instruction. This change
conservatively adds new global variables to the interfaces of all
entry points (if the SPIR-V version is 1.4 or higher).
Issue #3111 notes that a more rigorous approach to entry point
interfaces could be taken in spirv-fuzz, which would allow being less
conservative here.
This change prevents the spirv-fuzz function outliner from outlining a
region that uses the result of an OpAccessChain not defined inside the
region. Such accesses were turning into parameters to the outlined
function, and the result of an OpAccessChain cannot be passed as a
function parameter according to the SPIR-V specification.
Add support for SPV_KHR_non_semantic_info
This entails a couple of changes:
- Allowing unknown OpExtInstImport that begin with the prefix `NonSemantic.`
- Allowing OpExtInst that reference any of those sets to contain unknown
ext inst instruction numbers, and assume the format is always a series of IDs
as guaranteed by the extension.
- Allowing those OpExtInst to appear in the types/variables/constants section.
- Not stripping OpString in the --strip-debug pass, since it may be referenced
by these non-semantic OpExtInsts.
- Stripping them instead in the --strip-reflect pass.
* Add adjacency validation of non-semantic OpExtInst
- We validate and test that OpExtInst cannot appear before or between
OpPhi instructions, or before/between OpFunctionParameter
instructions.
* Change non-semantic extinst type to single value
* Add helper function spvExtInstIsNonSemantic() which will check if the extinst
set is non-semantic or not, either the unknown generic value or any future
recognised non-semantic set.
* Add test of a complex non-semantic extinst
* Use DefUseManager in StripDebugInfoPass to strip some OpStrings
* Any OpString used by a non-semantic instruction cannot be stripped, all others
can so we search for uses to see if each string can be removed.
* We only do this if the non-semantic debug info extension is enabled, otherwise
all strings can be trivially removed.
* Silence -Winconsistent-missing-override in protobufs
* Make Instrumentation format version 2 the default (Step 1)
Add new interfaces without version number argument. Remove version 1
logic and tests. Version interfaces will be removed in step 2 after
layers have transitioned to new interface.
* Add error messages to InstrumentPass().
* Don't crash when folding construct of empty struct
An OpCompositeConstruct of an empty struct will be folded to a constant
under normal circumstances. However, if the id limit has been reached
and the constant cannot be generated, then other folding rules will be
tried.
These rules do not handle the case of an empty struct. We add allow it
to be handled.
Fixes http://crbug/1030194
* Changes based on the review.
A new transformation and associated fuzzer pass in spirv-fuzz that
selects single-entry single-exit control flow graph regions and for
each selected region outlines the region into a new function and
replaces the original region with a call to this function.
The passes that add dead breaks and continues suffer from the
challenge that a new control flow graph edge can change dominance
information, leading to the potenital for definitions to no longer
dominate their uses. The attempt at guarding against this was known
to be incomplete. This change calls on the SPIR-V validator to do the
necessary checking: in deciding whether adding such an edge would be
legitimate, we clone the module, add the edge, and use the validator
to check whether the transformed clone is valid.
This strategy is heavy-weight, and should be used sparingly, but seems
like a good option when the validity of transformations is intricate,
to avoid reimplementing swathes of validation logic in the fuzzer.
Fixes#2919.
Access chain indices are always interpreted as signed integers.
So use signed clamp instead of unsigned clamp. We must also
clamp to the max signed int for the index type.
Fixes#3072
* Validate that if a construct contains a header and it's merge is
reachable, the construct also contains the merge
* updated block merging to not merge into the continue
* update inlining to mark the original block of a single block loop as
the continue
* updated some tests
* remove dead code
* rename kBlockTypeHeader to kBlockTypeSelection for clarity
Adds an option to run the validator on the SPIR-V binary after each
fuzzer pass has been applied, to help identify when the fuzzer has
made the module invalid. Also adds a helper method to allow dumping
of the sequence of transformations that have been applied to a JSON
file.
Prior to this change, TransformationReplaceIdWithSynonym was designed
to be able to replace an id with some synonymous data descriptor,
possibly necessitating extracting from a composite into a fresh id in
order to get at the synonymous data. This change simplifies things so
that TransformationReplaceIdWithSynonym just allows one id to be
replaced by another id. It is the responsibility of the associated
fuzzer pass - FuzzerPassApplyIdSynonyms - to perform the extraction
operations, using e.g. TransformationCompositeExtract.
Re-enable OpReadClockKHR validation
Fixes#2952
* Refactor some common scope validation
* Perform correct validation for scope in OpReadClockKHR
* Scope must be Subgroup or Device
* new tests
Inroduces a new transformation that adds a vector shuffle instruction
to the module, with associated facts about how the result vector of
the shuffle relates to the input vectors.
A fuzzer pass to add such transformations is not yet in place.
When a data synonym fact about two composites is added, data synonym
facts between all sub-components of the composites are also added.
Furthermore, when data synonym facts been all sub-components of two
composites are known, a data synonym fact relating the two composites
is added. Identification of this case is done in a lazy manner, when
questions about data synonym facts are asked.
The change introduces helper methods to get the size of an array type
and the number of elements of a struct type, and fixes
TransformationCompositeExtract to invalidate analyses appropriately.
An equivalence relation is computed by traversing the tree of values
rooted at the class's representative. Children were represented by
unordered sets, meaning that the order of values in an equivalence
class could be nondeterministic. This change makes things
deterministic by representing children using a vector.
The path compression optimization employed in the implementation of
the underlying union-find data structure has the potential to change
the order in which elements appear in an equivalence class by changing
the structure of the tree, so the guarantee of determinism is limited
to being a deterministic function of the manner in which the
equivalence relation is updated and inspected.
This change fixes a bug in EquivalenceRelation, changes the interface
of EquivalenceRelation to avoid exposing (potentially
nondeterministic) unordered sets, and changes the interface of
FactManager to allow querying data synonyms directly. These interface
changes have required a lot of corresponding changes to client code
and tests.
Implements the following simplifications:
(a - b) + b => a
(a * b) + (a * c) => a * (b + c)
Also adds logic to simplification to handle rules that create new operations
that might need simplification, such as the second rule above.
Only perform the second simplification if the multiplies have the add as their
only use. Otherwise this is a deoptimization of size and performance.
At present, TransformationReplaceIdWithSynonym both extracts elements
from composite objects and replaces uses of ids with synonyms. This
new TransformationCompositeExtract class will allow that
transformation to be broken into smaller transformations.
Class TransformationConstructComposite has been renamed to
TransformationCompositeConstruct, to correspond to the name of the
SPIR-V instruction (as is done with e.g. TransformationCopyObject).
Running tests revealed an issue related to checking dominance in
TransformationReplaceIdWithSynonym, which is also fixed here.
This change uses the recently-added equivalence relation class to
re-work the way synonyms between data values are managed by the fact
manager.
The tests for 'transformation_replace_id_with_synonym' have been
temporarily removed. This is because those tests are going to be
split into a number of test classes in an upcoming PR, once some other
refactorings have been applied, and it would be burdensome to
temporarily refactor all the tests to be in a working state for this
intermediate change.
Adds a templated class for representing an equivalence relation on a
value data type. This will be used by spirv-fuzz for representing
sets of distinct pieces of data in a shader that are known to have
equal values.
A new pass that gives spirv-fuzz the ability to adjust the memory
operand masks associated with memory access instructions (such as
OpLoad and OpCopy Memory).
Fixes#2940.
We have a check that ensures that the optimizer did not change the
binary when it says that it did not. However, when the binary is
converted back to a binary, we made a decision to remove OpNop
instructions. This means that any spv file that contains a NOP
originally will fail this check.
To get around this, we convert the module to a second binary that keeps
the OpNop instructions. That binary is compared against the original.
Fixes https://crbug.com/1010191
