Allow LocalSizeId as a way of sizing compute workgroups where the
environment allows it. A command-line switch is also added to force
acceptance even where the environment would not otherwise allow it.
convert-to-sampled-image pass converts images and/or samplers with
given pairs of descriptor set and binding to sampled image.
If a pair of an image and a sampler have the same pair of descriptor
set and binding that is one of the given pairs, they will be
converted to a sampled image. In addition, if only an image has the
descriptor set and binding that is one of the given pairs, it will
be converted to a sampled image as well.
For example, when we have
%a = OpLoad %type_2d_image %texture
%b = OpLoad %type_sampler %sampler
%combined = OpSampledImage %type_sampled_image %a %b
%value = OpImageSampleExplicitLod %v4float %combined ...
1. If %texture and %sampler have the same descriptor set and binding
%combine_texture_and_sampler = OpVaraible %ptr_type_sampled_image_Uniform
...
%combined = OpLoad %type_sampled_image %combine_texture_and_sampler
%value = OpImageSampleExplicitLod %v4float %combined ...
2. If %texture and %sampler have different pairs of descriptor set and binding
%a = OpLoad %type_sampled_image %texture
%extracted_image = OpImage %type_2d_image %a
%b = OpLoad %type_sampler %sampler
%combined = OpSampledImage %type_sampled_image %extracted_image %b
%value = OpImageSampleExplicitLod %v4float %combined ...
When a tool (tested with spirv-dis and spirv-as) runs on a file that
does not exist, it notifies the user and tries to close the stream that
was never successfully opened.
This PR adds a new executable spirv-lint with a simple "Hello, world!"
program, along with its associated library and a dummy unit test.
For now, only adds to CMake and Bazel; other build systems will be added
in a future PR.
Issue: #3196
spirv-fuzz features transformations that should be applicable by
construction. Assertions are used to detect when such transformations
turn out to be inapplicable. Failures of such assertions indicate bugs
in the fuzzer. However, when using the fuzzer at scale (e.g. in
ClusterFuzz) reports of these assertion failures create noise, and
cause the fuzzer to exit early. This change adds an option whereby
inapplicable transformations can be ignored. This reduces noise and
allows fuzzing to continue even when a transformation that should be
applicable but is not has been erroneously created.
The new pass will removed interface variable on the OpEntryPoint instruction when they are not statically referenced in the call tree of the entry point.
It can be enabled on the command line using the options `remove-unused-interface-variables`.
The fuzzer library depended on CLIMessageConsumer, due to its explicit
use in a function. This change removes that dependency so that,
instead, a message consumer parameter is passed.
* Use standard function to get stdin to binary mode.
The fisrt implementation to try to change stdin to binary mode is not
protable. Using freopen has a lot of implementation defined behaviour,
and the code relied on that working.
Looking into the MSVC documentation, I do not see a protable way of
doing this. I've implemented a Windows specific method and do nothing
for other systems. In general, UNIX based systems do make a distinction
between text and binary files, so nothing needs to be done for them.
Fixes#2518
* Split ReadFile into two different functions.
We want to remove the flag parameter. So the original function has been
replaced with ReadBinaryFile and ReadTextFile. This should make the
code more readable.
* Change name of CorrectlyReadFile to avoid confusion.
* Validate SPV_KHR_workgroup_memory_explicit_layout
* Check if SPIR-V is at least 1.4 to use the extension.
* Check if either only Workgroup Blocks or only Workgroup non-Blocks
are used.
* Check that if more than one Workgroup Block is used, variables are
decorated with Aliased.
* Check layout decorations for Workgroup Blocks.
* Implicitly use main capability if the ...8BitAccess or
...16BitAccess are used.
* Allow 8-bit and 16-bit types when ...8BitAccess and ...16BitAccess
are used respectively.
* Update SPIRV-Headers dependency
Bump it to include SPV_KHR_workgroup_memory_explicit_layout.
* Add option to validate Workgroup blocks with scalar layout
Validate the equivalent of scalarBlockLayout for Workgroup storage
class Block variables from SPV_KHR_workgroup_memory_explicit_layout.
Add option to the API and command line tool.
* tools/linker: Error out on unrecognized options
Fixes#4083.
* tools/linker: Use early returns when parsing options
This was already the case for some linker options, and other tools were
doing so for all of their options.
* tools/linker: Rework the usage output
* The new formatting for long options taking a value makes it explicit
that there is no equal sign between the option name and the value.
* The options are sorted by lexicographical order.
* Change the option formatting from 90 columns to 80, to match the other
tools.
* tools/linker: Change the default environment to spv1.5
* tools/linker: Change the default output to spv.out
Instead of writing to the standard output when the "-o" option is not
specified, the resulting linked SPIR-V binary will be written to
"spv.out".
One can still have the output sent to the standard output by specifying
"-o -".
* tools/linker: Update the reported target for --version
Running `spirv-link --version` will now report the currently selected
environment.
* tools/linker: Sort header includes
* linker: Improve module-related error messages
* Use 1-based indexing of modules;
* Say which module could not be built;
* Use the correct total number of input modules in the error message
when one fails to build.
If enabled the following targets will be created:
* `${SPIRV_TOOLS}-static` - `STATIC` library. Has full public symbol visibility.
* `${SPIRV_TOOLS}-shared` - `SHARED` library. Has default-hidden symbol visibility.
* `${SPIRV_TOOLS}` - will alias to one of above, based on BUILD_SHARED_LIBS.
If disabled the following targets will be created:
* `${SPIRV_TOOLS}` - either `STATIC` or `SHARED` based on the new `SPIRV_TOOLS_LIBRARY_TYPE` flag. Has full public symbol visibility.
* `${SPIRV_TOOLS}-shared` - `SHARED` library. Has default-hidden symbol visibility.
Defaults to `ON`, matching existing build behavior.
This flag can be used by package maintainers to ensure that all libraries are built as shared objects.
This fixes a problem where TransformationInlineFunction could lead to
distinct instructions having identical unique ids. It adds a validity
check to detect this problem in general.
Fixes#3911.
Adds a virtual method, GetFreshIds(), to Transformation. Every
transformation uses this to indicate which ids in its protobuf message
are fresh ids. This means that when replaying a sequence of
transformations the replayer can obtain a smallest id that is not in
use by the module already and that will not be used by any
transformation by necessity. Ids greater than or equal to this id
can be used as overflow ids.
Fixes#3851.
This CL adds some extra new lines and context comments into the
spirv-dis output format. This CL adds:
- Blank line and '; Annotations' before decorations
- Blank line and '; Debug Information' before debug instructions
- Blank line and '; Types, variables and constants' before type section
- Blank line and '; Function <name>' before each function.
Issue #788
Before this change, the replayer would return a SPIR-V binary. This
did not allow further transforming the resulting module: it would need
to be re-parsed, and the transformation context arising from the
replayed transformations was not available. This change makes it so
that after replay an IR context and transformation context are
returned instead; the IR context can subsequently be turned into a
binary if desired.
This change paves the way for an upcoming PR to integrate spirv-reduce
with the spirv-fuzz shrinker.
In preparation for some upcoming work on the shrinker, this PR changes
the interfaces of Fuzzer, Replayer and Shrinker so that all data
relevant to each class is provided on construction, meaning that the
"Run" method can become a zero-argument method that returns a status,
transformed binary and sequence of applied transformations via a
struct.
This makes greater use of fields, so that -- especially in Fuzzer --
there is a lot less parameter passing.
This change introduces various strategies for controlling the manner
in which fuzzer passes are applied repeatedly, including infrastructure
to allow fuzzer passes to be recommended based on which passes ran
previously.
Motivated by integrating spirv-reduce into spirv-fuzz, so that an
added function can be made smaller during shrinking, this adds support
in spirv-reduce for asking reduction to be restricted to the
instructions of a single specified function.
This change adds the notion of "overflow ids", which can be used
during shrinking to facilitate applying transformations that would
otherwise have become inapplicable due to earlier transformations
being removed.
Rename the `${SPIRV_TOOLS}` target to `${SPIRV_TOOLS}-static` and alias `${SPIRV_TOOLS}` to either `${SPIRV_TOOLS}-static` or `${SPIRV_TOOLS}-shared` depending on `BUILD_SHARED_LIBS`.
Re-point all internal uses of `${SPIRV_TOOLS}` to `${SPIRV_TOOLS}-static`.
`${SPIRV_TOOLS}-static` is explicitly renamed to just `${SPIRV_TOOLS}` to ensure the name does not change from current behavior.
Build the `SPIRV-Tools-*` libraries as static, as this is what they always were.
Force the external targets `gmock` and `effcee` to be built statically. These either do not support being built as shared libraries, or require special flags.
Issue: #3482
This change increases the set of validator options that can be passed
to spirv-opt, to match those options that spirv-reduce and spirv-fuzz
accept. This is useful to still allow some validation, at the start
of and during optimisation, for SPIR-V modules that the strict
validator would reject.
Some transformations (e.g. TransformationAddFunction) rely on running
the validator to decide whether the transformation is applicable. A
recent change allowed spirv-fuzz to take validator options, to cater
for the case where a module should be considered valid under
particular conditions. However, validation during the checking of
transformations had no access to these validator options.
This change introduced TransformationContext, which currently consists
of a fact manager and a set of validator options, but could in the
future have other fields corresponding to other objects that it is
useful to have access to when applying transformations. Now, instead
of checking and applying transformations in the context of a
FactManager, a TransformationContext is used. This gives access to
the fact manager as before, and also access to the validator options
when they are needed.
This change adds a fuzzer pass that allows code from other SPIR-V
modules to be donated into the module under transformation. It also
changes the command-line options of the tools so that, in fuzzing
mode, a file must be specified that contains the names of available
donor modules.
Add support for SPV_KHR_non_semantic_info
This entails a couple of changes:
- Allowing unknown OpExtInstImport that begin with the prefix `NonSemantic.`
- Allowing OpExtInst that reference any of those sets to contain unknown
ext inst instruction numbers, and assume the format is always a series of IDs
as guaranteed by the extension.
- Allowing those OpExtInst to appear in the types/variables/constants section.
- Not stripping OpString in the --strip-debug pass, since it may be referenced
by these non-semantic OpExtInsts.
- Stripping them instead in the --strip-reflect pass.
* Add adjacency validation of non-semantic OpExtInst
- We validate and test that OpExtInst cannot appear before or between
OpPhi instructions, or before/between OpFunctionParameter
instructions.
* Change non-semantic extinst type to single value
* Add helper function spvExtInstIsNonSemantic() which will check if the extinst
set is non-semantic or not, either the unknown generic value or any future
recognised non-semantic set.
* Add test of a complex non-semantic extinst
* Use DefUseManager in StripDebugInfoPass to strip some OpStrings
* Any OpString used by a non-semantic instruction cannot be stripped, all others
can so we search for uses to see if each string can be removed.
* We only do this if the non-semantic debug info extension is enabled, otherwise
all strings can be trivially removed.
* Silence -Winconsistent-missing-override in protobufs
Adds an option to run the validator on the SPIR-V binary after each
fuzzer pass has been applied, to help identify when the fuzzer has
made the module invalid. Also adds a helper method to allow dumping
of the sequence of transformations that have been applied to a JSON
file.
* Remove Impl struct in Reducer; we can re-add it later (in a cleaner fashion) if we need to.
* Add cleanup passes in Reducer; needed so that removal of constants can be disabled during the main passes, and then enabled during cleanup passes, otherwise some main passes can perform worse due to lack of available constants.
* Delete passes: remove op name, remove relaxed precision. And delete associated tests.
* Add more tests for remove unreferenced instructions.
* Always return and write the output file, even if there was a reduction failure.
* Only exit with 0 if the reduction completed or we hit the reduction step limit.
Adds a spirv-fuzz option for converting a SPIR-V shader into a shader
that renders red, whilst containing the body of the original shader.
This is for aiding in compiler crash bug reporting.
* reduce: add -o.
* reduce: add --temp-file-prefix.
* reduce: add interestingness test args.
* Detect bad args with one dash e.g. -a.
* reduce: fix validator args.
* Add = to args that require it.
* More consistent naming/style across fuzz/reduce.
* Change some 0 exit codes to 1.
To aid in debugging issues in spirv-fuzz, this change adds an option whereby the SPIR-V module is validated after each transformation is applied during replay. This can assist in finding a transformation that erroneously makes the module invalid, so that said transformation can be debugged.
