Right now, TransformationRecordSynonymousConstants requires the type
ids of two candidate constants to be exactly the same.
This PR adds an exception for integer constants, which can be
considered equivalent even if their signedness is different.
This applies to both integers and vector constants.
The IsApplicable method of ReplaceIdWithSynonym is also updated so
that, in the case of two integer constants which don't have the same
type, they can only be swapped in particular instructions (those
that don't take the signedness into consideration).
Fixes#3536.
This PR generalises TransformationAddAccessChain so that dynamic
indices for non-struct composites (with clamping to ensure that
accesses are in-bound) are allowed.
The transformation will add instructions to clamp any index to
a non-struct composite, regardless of whether it is a constant
or not.
Fixes#3179.
This fuzzer pass:
For each zero-like constant, either finds the existing definition of
the corresponding toggled one (OpConstantNull becomes zero-valued
scalar OpConstant or vice versa) or creates a new one if it doesn't
exist and records that the two are synonyms
For each use of these constants, probabilistically decides whether to
change it with the corresponding toggled constant id (as described in
#3486 )
Only uses inside blocks of instructions are considered and not, for
example, in instructions declaring other constants.
The SPIR-V data rules say that all uses of an OpSampledImage
instruction must be in the same block as the instruction, and highly
restrict those instructions that can consume the result id of an
OpSampledImage.
This adapts the transformations that split blocks and create synonyms
to avoid separating an OpSampledImage use from its definition, and to
avoid synonym-creation instructions such as OpCopyObject consuming an
OpSampledImage result id.
Some transformations (e.g. TransformationAddFunction) rely on running
the validator to decide whether the transformation is applicable. A
recent change allowed spirv-fuzz to take validator options, to cater
for the case where a module should be considered valid under
particular conditions. However, validation during the checking of
transformations had no access to these validator options.
This change introduced TransformationContext, which currently consists
of a fact manager and a set of validator options, but could in the
future have other fields corresponding to other objects that it is
useful to have access to when applying transformations. Now, instead
of checking and applying transformations in the context of a
FactManager, a TransformationContext is used. This gives access to
the fact manager as before, and also access to the validator options
when they are needed.
This change adds a fuzzer pass that sprinkles access chain
instructions into a module at random. This allows other passes to
have a richer set of pointers available to them, in particular the
passes that add loads and stores.
This change ensures that global and local variables donated from other
modules are always initialized at their declaration in the module
being transformed. This is to help limit issues related to undefined
behaviour that might arise due to accessing uninitialized memory.
The change also introduces some helper functions in fuzzer_util to
make it easier to find the pointee types of pointer types.
This change adds fuzzer passes that sprinkle loads and stores into a
module at random, with stores restricted to occur in either dead
blocks, or to use pointers for which it is known that the pointee
value does not influence the module's overall behaviour.
The change also generalises the VariableValueIsArbitrary fact to
PointeeValueIsIrrelevant, to allow stores through access chains or
object copies of variables whose values are known to be irrelevant.
The change includes some other minor refactorings.
Adds two new fuzzer passes to add variables to a module: one that adds
Private storage class global variables, another that adds Function
storage class local variables.
If the fuzzer object-copies a pointer we would like to be able to
perform loads from the copy (and stores to it, if its value is known
not to matter). Undefined and null pointers present a problem here,
so this change disallows copying them.
This change allows the generator to (optionally and at random) make
the functions of a module "livesafe" during donation. This involves
introducing a loop limiter variable to each function and gating the
number of total loop iterations for the function using that variable.
It also involves eliminating OpKill and OpUnreachable instructions
(changing them to OpReturn/OpReturnValue), and clamping access chain
indices so that they are always in-bounds.
This change refactors some code for walking access chain indexes to
make it mirror the structure of other code (to improve readability in
the first instance and potentially enable a future refactoring to
extract common code), and fixes a problem related to module donation
and function types.
This adds a new kind of fact to the fact manager that knows whether a
block is dead - i.e. guaranteed to be statically unreachable - and a
new transformation for adding a selection construct to a CFG that
conditionally branches to a fresh, dead block, such that the branch
will never be dynamically taken. Transformations that may create new
blocks ('split block' and 'outline function') are updated to propagate
dead block facts to newly-created blocks where appropriate. A fuzzer
pass randomly adds dead blocks to the module.
Future transformations will be able to exploit the fact that such
blocks are known to be dead.
The passes that add dead breaks and continues suffer from the
challenge that a new control flow graph edge can change dominance
information, leading to the potenital for definitions to no longer
dominate their uses. The attempt at guarding against this was known
to be incomplete. This change calls on the SPIR-V validator to do the
necessary checking: in deciding whether adding such an edge would be
legitimate, we clone the module, add the edge, and use the validator
to check whether the transformed clone is valid.
This strategy is heavy-weight, and should be used sparingly, but seems
like a good option when the validity of transformations is intricate,
to avoid reimplementing swathes of validation logic in the fuzzer.
Fixes#2919.
When a data synonym fact about two composites is added, data synonym
facts between all sub-components of the composites are also added.
Furthermore, when data synonym facts been all sub-components of two
composites are known, a data synonym fact relating the two composites
is added. Identification of this case is done in a lazy manner, when
questions about data synonym facts are asked.
The change introduces helper methods to get the size of an array type
and the number of elements of a struct type, and fixes
TransformationCompositeExtract to invalidate analyses appropriately.
At present, TransformationReplaceIdWithSynonym both extracts elements
from composite objects and replaces uses of ids with synonyms. This
new TransformationCompositeExtract class will allow that
transformation to be broken into smaller transformations.
This change uses the recently-added equivalence relation class to
re-work the way synonyms between data values are managed by the fact
manager.
The tests for 'transformation_replace_id_with_synonym' have been
temporarily removed. This is because those tests are going to be
split into a number of test classes in an upcoming PR, once some other
refactorings have been applied, and it would be burdensome to
temporarily refactor all the tests to be in a working state for this
intermediate change.
This change refactors the 'split blocks' transformation so that an
instruction is identified via a base, opcode, and number of those
opcodes to be skipped when searching from the base, as opposed to the
previous design which used a base and offset.
Adds a fuzzer pass and transformation to create a composite (array,
matrix, struct or vector) from available constituent components, and
inform the fact manager that each component of the new composite is
synonymous with the id that was used to construct it. This allows the
"replace id with synonym" pass to then replace uses of said ids with
uses of elements extracted from the composite.
Fixes#2858.
Issue #2919 identifies a problem in spirv-fuzz's ability to determine
when it is safe to add a new control flow edge without breaking
dominance rules. This change adds a (currently disabled) test to
expose the issue, and a comment to document that the current solution
is incomplete.
Because dominance information becomes a bit unreliable when blocks are
unreachable, this change makes it so that the 'dead break'
transformation will not introduce a break to an unreachable block.
Fixes#2907.
Issues #2898 and #2900 identify some cases where adding a dead
continue would lead to an invalid module, and these turned out to be
due to the lack of sensible dominance information when a continue
target is unreachable. This change requires that the header of a loop
dominates the loop's continue target if a dead continue is to be
added.
Furthermore, issue #2905 identified a shortcoming in the algorithm
being used to identify when it is OK, from a dominance point of view,
to add a new break/continue edge to a control flow graph. This change
replaces that algorithm with a simpler and more obviously correct
algorithm (that incidentally does not require the new edge to be a
break/continue edge in particular).
Fixes#2898.
Fixes#2900.
Fixes#2905.
The implementation of these passes had overlooked the fact that adding
a new edge to a control flow graph can change dominance information.
Adding a dead break/continue risks causing uses to no longer be
dominated by their definitions. This change introduces various tests
to expose such scenarios, and augments the preconditions for these
transformations with checks to guard against the situation.
This transformation can introduce an instruction that uses
OpCopyObject to make a copy of some other result id. This change
introduces the transformation, but does not yet introduce a fuzzer
pass to actually apply it.
Similar to the existing 'add dead breaks' pass, this adds a pass to
add dead continues to blocks in loops where such a transformation is
viable. Various functionality common to this new pass and 'add dead
breaks' has been factored into 'fuzzer_util', and some small
improvements to 'add dead breaks' that were identified while reviewing
that code again have been applied.
Fixes#2719.
With this pass, the fuzzer can split blocks in the input module. This
is mainly useful in order to give other (future) transformations more
opportunities to apply.
