There is an assert that verifies that the binary did not change when the
optimizer said that it did not. However, if the input binary is in big endian
format, the optimizer will encode the optimized binary in little endian. This
causes the assert to fail. Since we do not believe that anybody cares about a
big endien formate, we will disable the assert in that case.
Fixes#4722
spirv validation require OpFunctionCall with memory object, usually this
is non issue as all the functions are inlined.
This pass deal with some case for
DontInline function. accesschain input operand would be replaced new
created variable
Swift shader needs a way to inline all functions, even those marked as
DontInline. See https://github.com/KhronosGroup/SPIRV-Tools/pull/4471.
This implements the suggestion I made in the PR. We add a pass that
will remove the DontInline function control, so that the inlining passes
will inline them.
SwiftShader will still have to modify their code to add this pass before
the other passes are run.
Add a pass to spread Volatile semantics to variables with SMIDNV,
WarpIDNV, SubgroupSize, SubgroupLocalInvocationId, SubgroupEqMask,
SubgroupGeMask, SubgroupGtMask, SubgroupLeMask, or SubgroupLtMask BuiltIn
decorations or OpLoad for them when the shader model is the ray
generation, closest hit, miss, intersection, or callable shaders. This
pass can be used for VUID-StandaloneSpirv-VulkanMemoryModel-04678 and
VUID-StandaloneSpirv-VulkanMemoryModel-04679 (See "Standalone SPIR-V
Validation" section of Vulkan spec "Appendix A: Vulkan Environment for
SPIR-V").
Handle variables used by multiple entry points:
1. Update error check to make it working regardless of the order of
entry points.
2. For a variable, if it is used by two entry points E1 and E2 and
it needs the Volatile semantics for E1 while it does not for E2
- If VulkanMemoryModel capability is enabled, which means we have to
set memory operation of load instructions for the variable, we
update load instructions in E1, but do not update the ones in E2.
- If VulkanMemoryModel capability is disabled, which means we have
to add Volatile decoration for the variable, we report an error
because E1 needs to add Volatile decoration for the variable while
E2 does not.
For the simplicity of the implementation, we assume that all functions
other than entry point functions are inlined.
In https://github.com/KhronosGroup/SPIRV-Tools/pull/3110, the strip reflect
pass was changed to also remove all explicitly nonsemantic instructions. This
makes it so that the name of the pass no longer reflects what the pass actually
does. This change renames the pass so that it reflects what the pass actaully does.
The change in
commit 4ac8e5e541
Author: Greg Fischer <greg@lunarg.com>
Date: Wed Sep 15 12:38:34 2021 -0600
Add preserve_interface mode to aggressive_dead_code_elim (#4520)
Broke the C++ ABI for spirv-tools shared libraries on Linux, for not a great reason.
Restore the previous ABI.
convert-to-sampled-image pass converts images and/or samplers with
given pairs of descriptor set and binding to sampled image.
If a pair of an image and a sampler have the same pair of descriptor
set and binding that is one of the given pairs, they will be
converted to a sampled image. In addition, if only an image has the
descriptor set and binding that is one of the given pairs, it will
be converted to a sampled image as well.
For example, when we have
%a = OpLoad %type_2d_image %texture
%b = OpLoad %type_sampler %sampler
%combined = OpSampledImage %type_sampled_image %a %b
%value = OpImageSampleExplicitLod %v4float %combined ...
1. If %texture and %sampler have the same descriptor set and binding
%combine_texture_and_sampler = OpVaraible %ptr_type_sampled_image_Uniform
...
%combined = OpLoad %type_sampled_image %combine_texture_and_sampler
%value = OpImageSampleExplicitLod %v4float %combined ...
2. If %texture and %sampler have different pairs of descriptor set and binding
%a = OpLoad %type_sampled_image %texture
%extracted_image = OpImage %type_2d_image %a
%b = OpLoad %type_sampler %sampler
%combined = OpSampledImage %type_sampled_image %extracted_image %b
%value = OpImageSampleExplicitLod %v4float %combined ...
The new pass will removed interface variable on the OpEntryPoint instruction when they are not statically referenced in the call tree of the entry point.
It can be enabled on the command line using the options `remove-unused-interface-variables`.
This pass converts an internal form of GLSLstd450 Interpolate ops
to the externally valid form. The external form takes the lvalue
of the interpolant. The internal form can do a load of the interpolant.
The pass replaces the load with its pointer. The internal form is
generated by glslang and possibly other frontends for HLSL shaders.
The new pass is called as part of HLSL legalization after all
propagation is complete.
Also adds internal interpolate form to pre-legalization validation
Propagating the OpLine/OpNoLine to preserve the debug information
through transformations results in integrity check failures because of
the extra line instructions. This commit lets spirv-opt skip the
integrity check when the code contains OpLine or OpNoLine.
This instruments ImageRead, ImageWrite and ImageFetch when applied to
texel buffers.
Also add new (but not yet generated) buffer OOB error codes differentiated
for VUID classification.
Removing PropagateLineInfoPass and RedundantLineInfoElimPass from
56d0f5035 makes unit tests of many open source projects fail.
It will happen before submitting this glslang PR
https://github.com/KhronosGroup/glslang/pull/2440. This commit will be
git-reverted after merging the glslang PR.
Based on the OpLine spec, an OpLine instruction must be applied to
the instructions physically following it up to the first occurrence
of the next end of block, the next OpLine instruction, or the next
OpNoLine instruction.
```
OpLine %file 0 0
OpNoLine
OpLine %file 1 1
OpStore %foo %int_1
%value = OpLoad %int %foo
OpLine %file 2 2
```
For the above code, the current spirv-opt keeps three line
instructions `OpLine %file 0 0`, `OpNoLine`, and `OpLine %file 1 1`
in `std::vector<Instruction> dbg_line_insts_` of Instruction class
for `OpStore %foo %int_1`. It does not put any line instruction to
`std::vector<Instruction> dbg_line_insts_` of
`%value = OpLoad %int %foo` even though `OpLine %file 1 1` must be
applied to `%value = OpLoad %int %foo` based on the spec.
This results in the missing line information for
`%value = OpLoad %int %foo` while each spirv-opt pass optimizes the
code. We have to put `OpLine %file 1 1` to
`std::vector<Instruction> dbg_line_insts_` of
both `%value = OpLoad %int %foo` and `OpStore %foo %int_1`.
This commit conducts the line instruction propagation and skips
emitting the eliminated line instructions at the end, which are the same
with PropagateLineInfoPass and RedundantLineInfoElimPass. This
commit removes PropagateLineInfoPass and RedundantLineInfoElimPass.
KhronosGroup/glslang#2440 is a related PR that stop using
PropagateLineInfoPass and RedundantLineInfoElimPass from glslang.
When the code in this PR applied, the glslang tests will pass.
When DebugScope is given in SPIR-V, each instruction following the
DebugScope is from the lexical scope pointed by the DebugScope in
the high level language. We add DebugScope struction to keep the
scope information in Instruction class. When ir_loader loads
DebugScope/DebugNoScope, it keeps the scope information in
|last_dbg_scope_| and lets following instructions have that scope
information.
In terms of DebugDeclare/DebugValue, if it is in a function body
but outside of a basic block, we keep it in |debug_insts_in_header_|
of Function class. If it is in a basic block, we keep it as a normal
instruction i.e., in a instruction list of BasicBlock.
Create a pass to instrument OpDebugPrintf instructions. This pass replaces all OpDebugPrintf instructions with instructions to write a record containing the string id and the all specified values into a special printf output buffer (if space allows). This pass is designed to support the printf validation in the Vulkan validation layers.
Fixes#3210
We have a check that ensures that the optimizer did not change the
binary when it says that it did not. However, when the binary is
converted back to a binary, we made a decision to remove OpNop
instructions. This means that any spv file that contains a NOP
originally will fail this check.
To get around this, we convert the module to a second binary that keeps
the OpNop instructions. That binary is compared against the original.
Fixes https://crbug.com/1010191
* Handle id overflow in the ssa rewriter.
Remove LocalSSAElim pass at the same time. It does the same thing as the SSARewrite pass. Then even share almost all of the same code.
Fixes crbug.com/997246
The first pass applies the RelaxedPrecision decoration to all executable
instructions with float32 based type results. The second pass converts
all executable instructions with RelaxedPrecision result to the equivalent
float16 type, inserting converts where necessary.
Add the first steps to removing the AMD extension VK_AMD_shader_ballot.
Splitting up to make the PRs smaller.
Adding utilities to add capabilities and change the version of the
module.
Replaces the instructions:
OpGroupIAddNonUniformAMD = 5000
OpGroupFAddNonUniformAMD = 5001
OpGroupFMinNonUniformAMD = 5002
OpGroupUMinNonUniformAMD = 5003
OpGroupSMinNonUniformAMD = 5004
OpGroupFMaxNonUniformAMD = 5005
OpGroupUMaxNonUniformAMD = 5006
OpGroupSMaxNonUniformAMD = 5007
and extentend instructions
WriteInvocationAMD = 3
MbcntAMD = 4
Part of #2814
If they are not aliased, the function will always print the message:
"Binary unexpectedly changed despite optimizer saying there was no change"
Which is (usually) totally bogus.
Fixes#2798
We are no able to inline OpKill instructions into a continue construct.
See #2433. However, we have to be able to inline to correctly do
legalization. This commit creates a pass that will wrap OpKill
instructions into a function of its own. That way we are able to inline
the rest of the code.
The follow up to this will be to not inline any function that contains
an OpKill.
Fixes#2726
spirv-opt: Add --graphics-robust-access
Clamps access chain indices so they are always
in bounds.
Assumes:
- Logical addressing mode
- No runtime-array-descriptor-indexing
- No variable pointers
Adds stub code for clamping coordinate and samples
for OpImageTexelPointer.
Adds SinglePassRunAndFail optimizer test fixture.
Android.mk: add source/opt/graphics_robust_access_pass.cpp
Adds Constant::GetSignExtendedValue, Constant::GetZeroExtendedValue
New version has additional word in stage-specific section. Also
some changes in content for tesselation and compute shaders. Either
version can be invoked at pass creation. This is done to ease integration
and updating of validation layers. Version 1 is deprecated and eventually
will go away.
Also sneaking in fix to version 1 compute shaders.
WebGPU requires certain variables to be initialized, whereas there are
known issues with using initializers in Vulkan. This PR is the first
of three implementing a pass to decompose initialized variables into
a variable declaration followed by a store. This has been broken up
into multiple PRs, because there 3 distinct cases that need to be
handled, which require separate implementations.
This first PR implements the basic infrastructure that is needed, and
handling of Function storage class variables. Private and Output will
be handled in future PRs.
This is part of resolving #2388
In WebGPU, the component operand 0xFFFFFFFF is forbidden, but in
Vulkan it is used to indicate a value is undefined. When converting to
WebGPU, 0xFFFFFFFF needs to converted to a legal value, though the
specific one does not matter, since it was used to indicate an
undefined entry in the original code. Choosing to use 0, since the
operands are required to be on [0, N-1], so 0 is guaranteed to always
be valid.
Fixes#2349
