SPIRV-Tools/source/opt/decoration_manager.cpp
Nathan Gauër 4788ff1578
opt: add StorageUniformBufferBlock16 to trim pass (#5367)
Add StorageUniformBufferBlock16 to the list of enabled capabilities.
2023-08-10 14:21:35 +00:00

645 lines
24 KiB
C++

// Copyright (c) 2017 Pierre Moreau
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#include "source/opt/decoration_manager.h"
#include <algorithm>
#include <memory>
#include <set>
#include <stack>
#include <utility>
#include "source/opt/ir_context.h"
namespace spvtools {
namespace opt {
namespace analysis {
namespace {
using InstructionVector = std::vector<const spvtools::opt::Instruction*>;
using DecorationSet = std::set<std::u32string>;
// Returns true if |a| is a subet of |b|.
bool IsSubset(const DecorationSet& a, const DecorationSet& b) {
auto it1 = a.begin();
auto it2 = b.begin();
while (it1 != a.end()) {
if (it2 == b.end() || *it1 < *it2) {
// |*it1| is in |a|, but not in |b|.
return false;
}
if (*it1 == *it2) {
// Found the element move to the next one.
it1++;
it2++;
} else /* *it1 > *it2 */ {
// Did not find |*it1| yet, check the next element in |b|.
it2++;
}
}
return true;
}
} // namespace
bool DecorationManager::RemoveDecorationsFrom(
uint32_t id, std::function<bool(const Instruction&)> pred) {
bool was_modified = false;
const auto ids_iter = id_to_decoration_insts_.find(id);
if (ids_iter == id_to_decoration_insts_.end()) {
return was_modified;
}
TargetData& decorations_info = ids_iter->second;
auto context = module_->context();
std::vector<Instruction*> insts_to_kill;
const bool is_group = !decorations_info.decorate_insts.empty();
// Schedule all direct decorations for removal if instructed as such by
// |pred|.
for (Instruction* inst : decorations_info.direct_decorations)
if (pred(*inst)) insts_to_kill.push_back(inst);
// For all groups being directly applied to |id|, remove |id| (and the
// literal if |inst| is an OpGroupMemberDecorate) from the instruction
// applying the group.
std::unordered_set<const Instruction*> indirect_decorations_to_remove;
for (Instruction* inst : decorations_info.indirect_decorations) {
assert(inst->opcode() == spv::Op::OpGroupDecorate ||
inst->opcode() == spv::Op::OpGroupMemberDecorate);
std::vector<Instruction*> group_decorations_to_keep;
const uint32_t group_id = inst->GetSingleWordInOperand(0u);
const auto group_iter = id_to_decoration_insts_.find(group_id);
assert(group_iter != id_to_decoration_insts_.end() &&
"Unknown decoration group");
const auto& group_decorations = group_iter->second.direct_decorations;
for (Instruction* decoration : group_decorations) {
if (!pred(*decoration)) group_decorations_to_keep.push_back(decoration);
}
// If all decorations should be kept, then we can keep |id| part of the
// group. However, if the group itself has no decorations, we should remove
// the id from the group. This is needed to make |KillNameAndDecorate| work
// correctly when a decoration group has no decorations.
if (group_decorations_to_keep.size() == group_decorations.size() &&
group_decorations.size() != 0) {
continue;
}
// Otherwise, remove |id| from the targets of |group_id|
const uint32_t stride =
inst->opcode() == spv::Op::OpGroupDecorate ? 1u : 2u;
for (uint32_t i = 1u; i < inst->NumInOperands();) {
if (inst->GetSingleWordInOperand(i) != id) {
i += stride;
continue;
}
const uint32_t last_operand_index = inst->NumInOperands() - stride;
if (i < last_operand_index)
inst->GetInOperand(i) = inst->GetInOperand(last_operand_index);
// Remove the associated literal, if it exists.
if (stride == 2u) {
if (i < last_operand_index)
inst->GetInOperand(i + 1u) =
inst->GetInOperand(last_operand_index + 1u);
inst->RemoveInOperand(last_operand_index + 1u);
}
inst->RemoveInOperand(last_operand_index);
was_modified = true;
}
// If the instruction has no targets left, remove the instruction
// altogether.
if (inst->NumInOperands() == 1u) {
indirect_decorations_to_remove.emplace(inst);
insts_to_kill.push_back(inst);
} else if (was_modified) {
context->ForgetUses(inst);
indirect_decorations_to_remove.emplace(inst);
context->AnalyzeUses(inst);
}
// If only some of the decorations should be kept, clone them and apply
// them directly to |id|.
if (!group_decorations_to_keep.empty()) {
for (Instruction* decoration : group_decorations_to_keep) {
// simply clone decoration and change |group_id| to |id|
std::unique_ptr<Instruction> new_inst(
decoration->Clone(module_->context()));
new_inst->SetInOperand(0, {id});
module_->AddAnnotationInst(std::move(new_inst));
auto decoration_iter = --module_->annotation_end();
context->AnalyzeUses(&*decoration_iter);
}
}
}
auto& indirect_decorations = decorations_info.indirect_decorations;
indirect_decorations.erase(
std::remove_if(
indirect_decorations.begin(), indirect_decorations.end(),
[&indirect_decorations_to_remove](const Instruction* inst) {
return indirect_decorations_to_remove.count(inst);
}),
indirect_decorations.end());
was_modified |= !insts_to_kill.empty();
for (Instruction* inst : insts_to_kill) context->KillInst(inst);
insts_to_kill.clear();
// Schedule all instructions applying the group for removal if this group no
// longer applies decorations, either directly or indirectly.
if (is_group && decorations_info.direct_decorations.empty() &&
decorations_info.indirect_decorations.empty()) {
for (Instruction* inst : decorations_info.decorate_insts)
insts_to_kill.push_back(inst);
}
was_modified |= !insts_to_kill.empty();
for (Instruction* inst : insts_to_kill) context->KillInst(inst);
if (decorations_info.direct_decorations.empty() &&
decorations_info.indirect_decorations.empty() &&
decorations_info.decorate_insts.empty()) {
id_to_decoration_insts_.erase(ids_iter);
}
return was_modified;
}
std::vector<Instruction*> DecorationManager::GetDecorationsFor(
uint32_t id, bool include_linkage) {
return InternalGetDecorationsFor<Instruction*>(id, include_linkage);
}
std::vector<const Instruction*> DecorationManager::GetDecorationsFor(
uint32_t id, bool include_linkage) const {
return const_cast<DecorationManager*>(this)
->InternalGetDecorationsFor<const Instruction*>(id, include_linkage);
}
bool DecorationManager::HaveTheSameDecorations(uint32_t id1,
uint32_t id2) const {
const InstructionVector decorations_for1 = GetDecorationsFor(id1, false);
const InstructionVector decorations_for2 = GetDecorationsFor(id2, false);
// This function splits the decoration instructions into different sets,
// based on their opcode; only OpDecorate, OpDecorateId,
// OpDecorateStringGOOGLE, and OpMemberDecorate are considered, the other
// opcodes are ignored.
const auto fillDecorationSets =
[](const InstructionVector& decoration_list, DecorationSet* decorate_set,
DecorationSet* decorate_id_set, DecorationSet* decorate_string_set,
DecorationSet* member_decorate_set) {
for (const Instruction* inst : decoration_list) {
std::u32string decoration_payload;
// Ignore the opcode and the target as we do not want them to be
// compared.
for (uint32_t i = 1u; i < inst->NumInOperands(); ++i) {
for (uint32_t word : inst->GetInOperand(i).words) {
decoration_payload.push_back(word);
}
}
switch (inst->opcode()) {
case spv::Op::OpDecorate:
decorate_set->emplace(std::move(decoration_payload));
break;
case spv::Op::OpMemberDecorate:
member_decorate_set->emplace(std::move(decoration_payload));
break;
case spv::Op::OpDecorateId:
decorate_id_set->emplace(std::move(decoration_payload));
break;
case spv::Op::OpDecorateStringGOOGLE:
decorate_string_set->emplace(std::move(decoration_payload));
break;
default:
break;
}
}
};
DecorationSet decorate_set_for1;
DecorationSet decorate_id_set_for1;
DecorationSet decorate_string_set_for1;
DecorationSet member_decorate_set_for1;
fillDecorationSets(decorations_for1, &decorate_set_for1,
&decorate_id_set_for1, &decorate_string_set_for1,
&member_decorate_set_for1);
DecorationSet decorate_set_for2;
DecorationSet decorate_id_set_for2;
DecorationSet decorate_string_set_for2;
DecorationSet member_decorate_set_for2;
fillDecorationSets(decorations_for2, &decorate_set_for2,
&decorate_id_set_for2, &decorate_string_set_for2,
&member_decorate_set_for2);
const bool result = decorate_set_for1 == decorate_set_for2 &&
decorate_id_set_for1 == decorate_id_set_for2 &&
member_decorate_set_for1 == member_decorate_set_for2 &&
// Compare string sets last in case the strings are long.
decorate_string_set_for1 == decorate_string_set_for2;
return result;
}
bool DecorationManager::HaveSubsetOfDecorations(uint32_t id1,
uint32_t id2) const {
const InstructionVector decorations_for1 = GetDecorationsFor(id1, false);
const InstructionVector decorations_for2 = GetDecorationsFor(id2, false);
// This function splits the decoration instructions into different sets,
// based on their opcode; only OpDecorate, OpDecorateId,
// OpDecorateStringGOOGLE, and OpMemberDecorate are considered, the other
// opcodes are ignored.
const auto fillDecorationSets =
[](const InstructionVector& decoration_list, DecorationSet* decorate_set,
DecorationSet* decorate_id_set, DecorationSet* decorate_string_set,
DecorationSet* member_decorate_set) {
for (const Instruction* inst : decoration_list) {
std::u32string decoration_payload;
// Ignore the opcode and the target as we do not want them to be
// compared.
for (uint32_t i = 1u; i < inst->NumInOperands(); ++i) {
for (uint32_t word : inst->GetInOperand(i).words) {
decoration_payload.push_back(word);
}
}
switch (inst->opcode()) {
case spv::Op::OpDecorate:
decorate_set->emplace(std::move(decoration_payload));
break;
case spv::Op::OpMemberDecorate:
member_decorate_set->emplace(std::move(decoration_payload));
break;
case spv::Op::OpDecorateId:
decorate_id_set->emplace(std::move(decoration_payload));
break;
case spv::Op::OpDecorateStringGOOGLE:
decorate_string_set->emplace(std::move(decoration_payload));
break;
default:
break;
}
}
};
DecorationSet decorate_set_for1;
DecorationSet decorate_id_set_for1;
DecorationSet decorate_string_set_for1;
DecorationSet member_decorate_set_for1;
fillDecorationSets(decorations_for1, &decorate_set_for1,
&decorate_id_set_for1, &decorate_string_set_for1,
&member_decorate_set_for1);
DecorationSet decorate_set_for2;
DecorationSet decorate_id_set_for2;
DecorationSet decorate_string_set_for2;
DecorationSet member_decorate_set_for2;
fillDecorationSets(decorations_for2, &decorate_set_for2,
&decorate_id_set_for2, &decorate_string_set_for2,
&member_decorate_set_for2);
const bool result =
IsSubset(decorate_set_for1, decorate_set_for2) &&
IsSubset(decorate_id_set_for1, decorate_id_set_for2) &&
IsSubset(member_decorate_set_for1, member_decorate_set_for2) &&
// Compare string sets last in case the strings are long.
IsSubset(decorate_string_set_for1, decorate_string_set_for2);
return result;
}
// TODO(pierremoreau): If OpDecorateId is referencing an OpConstant, one could
// check that the constants are the same rather than just
// looking at the constant ID.
bool DecorationManager::AreDecorationsTheSame(const Instruction* inst1,
const Instruction* inst2,
bool ignore_target) const {
switch (inst1->opcode()) {
case spv::Op::OpDecorate:
case spv::Op::OpMemberDecorate:
case spv::Op::OpDecorateId:
case spv::Op::OpDecorateStringGOOGLE:
break;
default:
return false;
}
if (inst1->opcode() != inst2->opcode() ||
inst1->NumInOperands() != inst2->NumInOperands())
return false;
for (uint32_t i = ignore_target ? 1u : 0u; i < inst1->NumInOperands(); ++i)
if (inst1->GetInOperand(i) != inst2->GetInOperand(i)) return false;
return true;
}
void DecorationManager::AnalyzeDecorations() {
if (!module_) return;
// For each group and instruction, collect all their decoration instructions.
for (Instruction& inst : module_->annotations()) {
AddDecoration(&inst);
}
}
void DecorationManager::AddDecoration(Instruction* inst) {
switch (inst->opcode()) {
case spv::Op::OpDecorate:
case spv::Op::OpDecorateId:
case spv::Op::OpDecorateStringGOOGLE:
case spv::Op::OpMemberDecorate: {
const auto target_id = inst->GetSingleWordInOperand(0u);
id_to_decoration_insts_[target_id].direct_decorations.push_back(inst);
break;
}
case spv::Op::OpGroupDecorate:
case spv::Op::OpGroupMemberDecorate: {
const uint32_t start =
inst->opcode() == spv::Op::OpGroupDecorate ? 1u : 2u;
const uint32_t stride = start;
for (uint32_t i = start; i < inst->NumInOperands(); i += stride) {
const auto target_id = inst->GetSingleWordInOperand(i);
TargetData& target_data = id_to_decoration_insts_[target_id];
target_data.indirect_decorations.push_back(inst);
}
const auto target_id = inst->GetSingleWordInOperand(0u);
id_to_decoration_insts_[target_id].decorate_insts.push_back(inst);
break;
}
default:
break;
}
}
void DecorationManager::AddDecoration(spv::Op opcode,
std::vector<Operand> opnds) {
IRContext* ctx = module_->context();
std::unique_ptr<Instruction> newDecoOp(
new Instruction(ctx, opcode, 0, 0, opnds));
ctx->AddAnnotationInst(std::move(newDecoOp));
}
void DecorationManager::AddDecoration(uint32_t inst_id, uint32_t decoration) {
AddDecoration(
spv::Op::OpDecorate,
{{spv_operand_type_t::SPV_OPERAND_TYPE_ID, {inst_id}},
{spv_operand_type_t::SPV_OPERAND_TYPE_LITERAL_INTEGER, {decoration}}});
}
void DecorationManager::AddDecorationVal(uint32_t inst_id, uint32_t decoration,
uint32_t decoration_value) {
AddDecoration(
spv::Op::OpDecorate,
{{spv_operand_type_t::SPV_OPERAND_TYPE_ID, {inst_id}},
{spv_operand_type_t::SPV_OPERAND_TYPE_LITERAL_INTEGER, {decoration}},
{spv_operand_type_t::SPV_OPERAND_TYPE_LITERAL_INTEGER,
{decoration_value}}});
}
void DecorationManager::AddMemberDecoration(uint32_t inst_id, uint32_t member,
uint32_t decoration,
uint32_t decoration_value) {
AddDecoration(
spv::Op::OpMemberDecorate,
{{spv_operand_type_t::SPV_OPERAND_TYPE_ID, {inst_id}},
{spv_operand_type_t::SPV_OPERAND_TYPE_LITERAL_INTEGER, {member}},
{spv_operand_type_t::SPV_OPERAND_TYPE_LITERAL_INTEGER, {decoration}},
{spv_operand_type_t::SPV_OPERAND_TYPE_LITERAL_INTEGER,
{decoration_value}}});
}
template <typename T>
std::vector<T> DecorationManager::InternalGetDecorationsFor(
uint32_t id, bool include_linkage) {
std::vector<T> decorations;
const auto ids_iter = id_to_decoration_insts_.find(id);
// |id| has no decorations
if (ids_iter == id_to_decoration_insts_.end()) return decorations;
const TargetData& target_data = ids_iter->second;
const auto process_direct_decorations =
[include_linkage,
&decorations](const std::vector<Instruction*>& direct_decorations) {
for (Instruction* inst : direct_decorations) {
const bool is_linkage =
inst->opcode() == spv::Op::OpDecorate &&
spv::Decoration(inst->GetSingleWordInOperand(1u)) ==
spv::Decoration::LinkageAttributes;
if (include_linkage || !is_linkage) decorations.push_back(inst);
}
};
// Process |id|'s decorations.
process_direct_decorations(ids_iter->second.direct_decorations);
// Process the decorations of all groups applied to |id|.
for (const Instruction* inst : target_data.indirect_decorations) {
const uint32_t group_id = inst->GetSingleWordInOperand(0u);
const auto group_iter = id_to_decoration_insts_.find(group_id);
assert(group_iter != id_to_decoration_insts_.end() && "Unknown group ID");
process_direct_decorations(group_iter->second.direct_decorations);
}
return decorations;
}
bool DecorationManager::WhileEachDecoration(
uint32_t id, uint32_t decoration,
std::function<bool(const Instruction&)> f) const {
for (const Instruction* inst : GetDecorationsFor(id, true)) {
switch (inst->opcode()) {
case spv::Op::OpMemberDecorate:
if (inst->GetSingleWordInOperand(2) == decoration) {
if (!f(*inst)) return false;
}
break;
case spv::Op::OpDecorate:
case spv::Op::OpDecorateId:
case spv::Op::OpDecorateStringGOOGLE:
if (inst->GetSingleWordInOperand(1) == decoration) {
if (!f(*inst)) return false;
}
break;
default:
assert(false && "Unexpected decoration instruction");
}
}
return true;
}
void DecorationManager::ForEachDecoration(
uint32_t id, uint32_t decoration,
std::function<void(const Instruction&)> f) const {
WhileEachDecoration(id, decoration, [&f](const Instruction& inst) {
f(inst);
return true;
});
}
bool DecorationManager::HasDecoration(uint32_t id,
spv::Decoration decoration) const {
return HasDecoration(id, static_cast<uint32_t>(decoration));
}
bool DecorationManager::HasDecoration(uint32_t id, uint32_t decoration) const {
bool has_decoration = false;
ForEachDecoration(id, decoration, [&has_decoration](const Instruction&) {
has_decoration = true;
});
return has_decoration;
}
bool DecorationManager::FindDecoration(
uint32_t id, uint32_t decoration,
std::function<bool(const Instruction&)> f) {
return !WhileEachDecoration(
id, decoration, [&f](const Instruction& inst) { return !f(inst); });
}
void DecorationManager::CloneDecorations(uint32_t from, uint32_t to) {
const auto decoration_list = id_to_decoration_insts_.find(from);
if (decoration_list == id_to_decoration_insts_.end()) return;
auto context = module_->context();
for (Instruction* inst : decoration_list->second.direct_decorations) {
// simply clone decoration and change |target-id| to |to|
std::unique_ptr<Instruction> new_inst(inst->Clone(module_->context()));
new_inst->SetInOperand(0, {to});
module_->AddAnnotationInst(std::move(new_inst));
auto decoration_iter = --module_->annotation_end();
context->AnalyzeUses(&*decoration_iter);
}
// We need to copy the list of instructions as ForgetUses and AnalyzeUses are
// going to modify it.
std::vector<Instruction*> indirect_decorations =
decoration_list->second.indirect_decorations;
for (Instruction* inst : indirect_decorations) {
switch (inst->opcode()) {
case spv::Op::OpGroupDecorate:
context->ForgetUses(inst);
// add |to| to list of decorated id's
inst->AddOperand(
Operand(spv_operand_type_t::SPV_OPERAND_TYPE_ID, {to}));
context->AnalyzeUses(inst);
break;
case spv::Op::OpGroupMemberDecorate: {
context->ForgetUses(inst);
// for each (id == from), add (to, literal) as operands
const uint32_t num_operands = inst->NumOperands();
for (uint32_t i = 1; i < num_operands; i += 2) {
Operand op = inst->GetOperand(i);
if (op.words[0] == from) { // add new pair of operands: (to, literal)
inst->AddOperand(
Operand(spv_operand_type_t::SPV_OPERAND_TYPE_ID, {to}));
op = inst->GetOperand(i + 1);
inst->AddOperand(std::move(op));
}
}
context->AnalyzeUses(inst);
break;
}
default:
assert(false && "Unexpected decoration instruction");
}
}
}
void DecorationManager::CloneDecorations(
uint32_t from, uint32_t to,
const std::vector<spv::Decoration>& decorations_to_copy) {
const auto decoration_list = id_to_decoration_insts_.find(from);
if (decoration_list == id_to_decoration_insts_.end()) return;
auto context = module_->context();
for (Instruction* inst : decoration_list->second.direct_decorations) {
if (std::find(decorations_to_copy.begin(), decorations_to_copy.end(),
spv::Decoration(inst->GetSingleWordInOperand(1))) ==
decorations_to_copy.end()) {
continue;
}
// Clone decoration and change |target-id| to |to|.
std::unique_ptr<Instruction> new_inst(inst->Clone(module_->context()));
new_inst->SetInOperand(0, {to});
module_->AddAnnotationInst(std::move(new_inst));
auto decoration_iter = --module_->annotation_end();
context->AnalyzeUses(&*decoration_iter);
}
// We need to copy the list of instructions as ForgetUses and AnalyzeUses are
// going to modify it.
std::vector<Instruction*> indirect_decorations =
decoration_list->second.indirect_decorations;
for (Instruction* inst : indirect_decorations) {
switch (inst->opcode()) {
case spv::Op::OpGroupDecorate:
CloneDecorations(inst->GetSingleWordInOperand(0), to,
decorations_to_copy);
break;
case spv::Op::OpGroupMemberDecorate: {
assert(false && "The source id is not suppose to be a type.");
break;
}
default:
assert(false && "Unexpected decoration instruction");
}
}
}
void DecorationManager::RemoveDecoration(Instruction* inst) {
const auto remove_from_container = [inst](std::vector<Instruction*>& v) {
v.erase(std::remove(v.begin(), v.end(), inst), v.end());
};
switch (inst->opcode()) {
case spv::Op::OpDecorate:
case spv::Op::OpDecorateId:
case spv::Op::OpDecorateStringGOOGLE:
case spv::Op::OpMemberDecorate: {
const auto target_id = inst->GetSingleWordInOperand(0u);
auto const iter = id_to_decoration_insts_.find(target_id);
if (iter == id_to_decoration_insts_.end()) return;
remove_from_container(iter->second.direct_decorations);
} break;
case spv::Op::OpGroupDecorate:
case spv::Op::OpGroupMemberDecorate: {
const uint32_t stride =
inst->opcode() == spv::Op::OpGroupDecorate ? 1u : 2u;
for (uint32_t i = 1u; i < inst->NumInOperands(); i += stride) {
const auto target_id = inst->GetSingleWordInOperand(i);
auto const iter = id_to_decoration_insts_.find(target_id);
if (iter == id_to_decoration_insts_.end()) continue;
remove_from_container(iter->second.indirect_decorations);
}
const auto group_id = inst->GetSingleWordInOperand(0u);
auto const iter = id_to_decoration_insts_.find(group_id);
if (iter == id_to_decoration_insts_.end()) return;
remove_from_container(iter->second.decorate_insts);
} break;
default:
break;
}
}
bool operator==(const DecorationManager& lhs, const DecorationManager& rhs) {
return lhs.id_to_decoration_insts_ == rhs.id_to_decoration_insts_;
}
} // namespace analysis
} // namespace opt
} // namespace spvtools