Custom memory pools

A memory pool contains a number of VkDeviceMemory blocks. The library automatically creates and manages default pool for each memory type available on the device. Default memory pool automatically grows in size. Size of allocated blocks is also variable and managed automatically. You are using default pools whenever you leave VmaAllocationCreateInfo::pool = null.

You can create custom pool and allocate memory out of it. It can be useful if you want to:

• Keep certain kind of allocations separate from others.
• Enforce particular, fixed size of Vulkan memory blocks.
• Limit maximum amount of Vulkan memory allocated for that pool.
• Reserve minimum or fixed amount of Vulkan memory always preallocated for that pool.
• Use extra parameters for a set of your allocations that are available in VmaPoolCreateInfo but not in VmaAllocationCreateInfo - e.g., custom minimum alignment, custom pNext chain.
• Perform defragmentation on a specific subset of your allocations.

To use custom memory pools:

1. Fill VmaPoolCreateInfo structure.
2. Call vmaCreatePool() to obtain VmaPool handle.
3. When making an allocation, set VmaAllocationCreateInfo::pool to this handle. You don't need to specify any other parameters of this structure, like usage.

Example:

// Find memoryTypeIndex for the pool.
VkBufferCreateInfo sampleBufCreateInfo = { VK_STRUCTURE_TYPE_BUFFER_CREATE_INFO };
sampleBufCreateInfo.size = 0x10000; // Doesn't matter.
sampleBufCreateInfo.usage = VK_BUFFER_USAGE_UNIFORM_BUFFER_BIT | VK_BUFFER_USAGE_TRANSFER_DST_BIT;
 
VmaAllocationCreateInfo sampleAllocCreateInfo = {};
sampleAllocCreateInfo.usage = VMA_MEMORY_USAGE_AUTO;
 
uint32_t memTypeIndex;
VkResult res = vmaFindMemoryTypeIndexForBufferInfo(allocator,
    &sampleBufCreateInfo, &sampleAllocCreateInfo, &memTypeIndex);
// Check res...
 
// Create a pool that can have at most 2 blocks, 128 MiB each.
VmaPoolCreateInfo poolCreateInfo = {};
poolCreateInfo.memoryTypeIndex = memTypeIndex;
poolCreateInfo.blockSize = 128ull * 1024 * 1024;
poolCreateInfo.maxBlockCount = 2;
 
VmaPool pool;
res = vmaCreatePool(allocator, &poolCreateInfo, &pool);
// Check res...
 
// Allocate a buffer out of it.
VkBufferCreateInfo bufCreateInfo = { VK_STRUCTURE_TYPE_BUFFER_CREATE_INFO };
bufCreateInfo.size = 1024;
bufCreateInfo.usage = VK_BUFFER_USAGE_UNIFORM_BUFFER_BIT | VK_BUFFER_USAGE_TRANSFER_DST_BIT;
 
VmaAllocationCreateInfo allocCreateInfo = {};
allocCreateInfo.pool = pool;
 
VkBuffer buf;
VmaAllocation alloc;
res = vmaCreateBuffer(allocator, &bufCreateInfo, &allocCreateInfo, &buf, &alloc, nullptr);
// Check res...

You have to free all allocations made from this pool before destroying it.

vmaDestroyBuffer(allocator, buf, alloc);
vmaDestroyPool(allocator, pool);

New versions of this library support creating dedicated allocations in custom pools. It is supported only when VmaPoolCreateInfo::blockSize = 0. To use this feature, set VmaAllocationCreateInfo::pool to the pointer to your custom pool and VmaAllocationCreateInfo::flags to VMA_ALLOCATION_CREATE_DEDICATED_MEMORY_BIT.

Choosing memory type index

When creating a pool, you must explicitly specify memory type index. To find the one suitable for your buffers or images, you can use helper functions vmaFindMemoryTypeIndexForBufferInfo(), vmaFindMemoryTypeIndexForImageInfo(). You need to provide structures with example parameters of buffers or images that you are going to create in that pool.

VkBufferCreateInfo exampleBufCreateInfo = { VK_STRUCTURE_TYPE_BUFFER_CREATE_INFO };
exampleBufCreateInfo.size = 1024; // Doesn't matter
exampleBufCreateInfo.usage = VK_BUFFER_USAGE_UNIFORM_BUFFER_BIT | VK_BUFFER_USAGE_TRANSFER_DST_BIT;
 
VmaAllocationCreateInfo allocCreateInfo = {};
allocCreateInfo.usage = VMA_MEMORY_USAGE_AUTO;
 
uint32_t memTypeIndex;
vmaFindMemoryTypeIndexForBufferInfo(allocator, &exampleBufCreateInfo, &allocCreateInfo, &memTypeIndex);
 
VmaPoolCreateInfo poolCreateInfo = {};
poolCreateInfo.memoryTypeIndex = memTypeIndex;
// ...

When creating buffers/images allocated in that pool, provide following parameters:

• VkBufferCreateInfo: Prefer to pass same parameters as above. Otherwise you risk creating resources in a memory type that is not suitable for them, which may result in undefined behavior. Using different VK_BUFFER_USAGE_ flags may work, but you shouldn't create images in a pool intended for buffers or the other way around.
• VmaAllocationCreateInfo: You don't need to pass same parameters. Fill only pool member. Other members are ignored anyway.

When not to use custom pools

Custom pools are commonly overused by VMA users. While it may feel natural to keep some logical groups of resources separate in memory, in most cases it does more harm than good. Using custom pool shouldn't be your first choice. Instead, please make all allocations from default pools first and only use custom pools if you can prove and measure that it is beneficial in some way, e.g. it results in lower memory usage, better performance, etc.

Using custom pools has disadvantages:

• Each pool has its own collection of VkDeviceMemory blocks. Some of them may be partially or even completely empty. Spreading allocations across multiple pools increases the amount of wasted (allocated but unbound) memory.
• You must manually choose specific memory type to be used by a custom pool (set as VmaPoolCreateInfo::memoryTypeIndex). When using default pools, best memory type for each of your allocations can be selected automatically using a carefully design algorithm that works across all kinds of GPUs.
• If an allocation from a custom pool at specific memory type fails, entire allocation operation returns failure. When using default pools, VMA tries another compatible memory type.
• If you set VmaPoolCreateInfo::blockSize != 0, each memory block has the same size, while default pools start from small blocks and only allocate next blocks larger and larger up to the preferred block size.

Many of the common concerns can be addressed in a different way than using custom pools:

• If you want to keep your allocations of certain size (small versus large) or certain lifetime (transient versus long lived) separate, you likely don't need to. VMA uses a high quality allocation algorithm that manages memory well in various cases. Please measure and check if using custom pools provides a benefit.
• If you want to keep your images and buffers separate, you don't need to. VMA respects bufferImageGranularity limit automatically.
• If you want to keep your mapped and not mapped allocations separate, you don't need to. VMA respects nonCoherentAtomSize limit automatically. It also maps only those VkDeviceMemory blocks that need to map any allocation. It even tries to keep mappable and non-mappable allocations in separate blocks to minimize the amount of mapped memory.
• If you want to choose a custom size for the default memory block, you can set it globally instead using VmaAllocatorCreateInfo::preferredLargeHeapBlockSize.
• If you want to select specific memory type for your allocation, you can set VmaAllocationCreateInfo::memoryTypeBits to (1u << myMemoryTypeIndex) instead.
• If you need to create a buffer with certain minimum alignment, you can still do it using default pools with dedicated function vmaCreateBufferWithAlignment().

Linear allocation algorithm

Each Vulkan memory block managed by this library has accompanying metadata that keeps track of used and unused regions. By default, the metadata structure and algorithm tries to find best place for new allocations among free regions to optimize memory usage. This way you can allocate and free objects in any order.

Sometimes there is a need to use simpler, linear allocation algorithm. You can create custom pool that uses such algorithm by adding flag VMA_POOL_CREATE_LINEAR_ALGORITHM_BIT to VmaPoolCreateInfo::flags while creating VmaPool object. Then an alternative metadata management is used. It always creates new allocations after last one and doesn't reuse free regions after allocations freed in the middle. It results in better allocation performance and less memory consumed by metadata.

With this one flag, you can create a custom pool that can be used in many ways: free-at-once, stack, double stack, and ring buffer. See below for details. You don't need to specify explicitly which of these options you are going to use - it is detected automatically.

Free-at-once

In a pool that uses linear algorithm, you still need to free all the allocations individually, e.g. by using vmaFreeMemory() or vmaDestroyBuffer(). You can free them in any order. New allocations are always made after last one - free space in the middle is not reused. However, when you release all the allocation and the pool becomes empty, allocation starts from the beginning again. This way you can use linear algorithm to speed up creation of allocations that you are going to release all at once.

This mode is also available for pools created with VmaPoolCreateInfo::maxBlockCount value that allows multiple memory blocks.

Stack

When you free an allocation that was created last, its space can be reused. Thanks to this, if you always release allocations in the order opposite to their creation (LIFO - Last In First Out), you can achieve behavior of a stack.

This mode is also available for pools created with VmaPoolCreateInfo::maxBlockCount value that allows multiple memory blocks.

Double stack

The space reserved by a custom pool with linear algorithm may be used by two stacks:

• First, default one, growing up from offset 0.
• Second, "upper" one, growing down from the end towards lower offsets.

To make allocation from the upper stack, add flag VMA_ALLOCATION_CREATE_UPPER_ADDRESS_BIT to VmaAllocationCreateInfo::flags.

Double stack is available only in pools with one memory block - VmaPoolCreateInfo::maxBlockCount must be 1. Otherwise behavior is undefined.

When the two stacks' ends meet so there is not enough space between them for a new allocation, such allocation fails with usual VK_ERROR_OUT_OF_DEVICE_MEMORY error.

Ring buffer

When you free some allocations from the beginning and there is not enough free space for a new one at the end of a pool, allocator's "cursor" wraps around to the beginning and starts allocation there. Thanks to this, if you always release allocations in the same order as you created them (FIFO - First In First Out), you can achieve behavior of a ring buffer / queue.

Ring buffer is available only in pools with one memory block - VmaPoolCreateInfo::maxBlockCount must be 1. Otherwise behavior is undefined.

Note

Defragmentation is not supported in custom pools created with VMA_POOL_CREATE_LINEAR_ALGORITHM_BIT.