Update to use boost 1.30.2 by default, and use the -pthread compiler/linker

option when building on linux.

asio/INSTALL

@@ -8,6 +8,7 @@ asio version 0.1.2 - Installation instructions
 5.1.   Building with MSVC
 5.2.   Building with Borland C++
 5.3.   Building with MinGW
+5.4.   Building with MinGW and MSYS
 
 
 1. Supported Platforms
@@ -26,8 +27,9 @@ combinations:
 2. Requirements
 ===============
 
-The asio toolkit requires boost version 1.30.0. There is no need to build any
-of the boost libraries to use asio, as only the header files are required.
+The asio toolkit requires either of the boost versions 1.30.0 or 1.30.2. There
+is no need to build any of the boost libraries to use asio, as only the header
+files are required.
 
 
 3. Before using asio
@@ -38,19 +40,23 @@ build any libraries before using asio in your own applications. You simply need
 to add the following directories to your compiler include path:
 
   - asio's `include' directory
-  - the boost directory (i.e. the directory called boost_1_30_0)
+  - the boost directory (i.e. the one called boost-1.30.2 or boost_1_30_0)
 
 
 4. Building the tests on Linux
 ==============================
 
-If the boost directory (i.e. the directory called boost_1_30_0) is in the same
-directory as the asio source kit, then you may configure asio by simply going:
+If the boost directory (i.e. the directory called boost-1.30.2 or boost_1_30_0)
+is in the same directory as the asio source kit, then you may configure asio by
+simply going:
 
   ./configure
 
-in the root directory of the asio source kit. If the boost directory is in some
-other location, then you need to specify this directory when running configure:
+in the root directory of the asio source kit. Note that configure will always
+use 1.30.2 in preference to 1.30.0 if both versions are present.
+
+If the boost directory is in some other location, then you need to specify this
+directory when running configure:
 
   ./configure --with-boost=<BOOSTDIR>
 
@@ -63,14 +69,16 @@ To build, simply run `make' in the root directory of the asio source kit.
 5. Building the tests on Win32
 ==============================
 
-To build with any of the supported Win32 compilers, the boost directory (i.e.
-the directory called boost_1_30_0) must be in the same directory as the one
-that contains the asio source kit.
-
 5.1. Building with MSVC
 
 To build using the MSVC 6 command line compiler, perform the following steps:
 
+  - If you are using a version of boost other than 1.30.2, or if the boost
+    directory (i.e. the directory called boost-1.30.2) is not in the same
+    directory as the asio source kit, then specify the location of boost by
+    running a command similar to `set BOOSTDIR=path_to_boost'. Ensure that
+    you specify an absolute path.
+
   - Change to the asio `src' directory.
 
   - Execute the command `nmake -f Makefile.msc'.
@@ -80,6 +88,12 @@ To build using the MSVC 6 command line compiler, perform the following steps:
 To build using the Borland C++ Builder 6 command line compiler, perform the
 following steps:
 
+  - If you are using a version of boost other than 1.30.2, or if the boost
+    directory (i.e. the directory called boost-1.30.2) is not in the same
+    directory as the asio source kit, then specify the location of boost by
+    running a command similar to `set BOOSTDIR=path_to_boost'. Ensure that
+    you specify an absolute path.
+
   - Change to the asio `src' directory.
 
   - Execute the command `make -f Makefile.bor'.
@@ -89,6 +103,33 @@ following steps:
 To build using the MinGW g++ compiler from the command line, perform the
 following steps:
 
+  - If you are using a version of boost other than 1.30.2, or if the boost
+    directory (i.e. the directory called boost-1.30.2) is not in the same
+    directory as the asio source kit, then specify the location of boost by
+    running a command similar to `set BOOSTDIR=path_to_boost'. Ensure that
+    you specify an absolute path.
+
   - Change to the asio `src' directory.
 
   - Execute the command `mingw32-make -f Makefile.mgw'.
+
+5.4. Building with MinGW and MSYS
+
+If the boost directory (i.e. the directory called boost-1.30.2 or boost_1_30_0)
+is in the same directory as the asio source kit, then you may configure asio by
+simply going:
+
+  sh configure
+
+in the root directory of the asio source kit. Note that configure will always
+use 1.30.2 in preference to 1.30.0 if both versions are present.
+
+If the boost directory is in some other location, then you need to specify this
+directory when running configure:
+
+  sh configure --with-boost=<BOOSTDIR>
+
+When specifying the boost directory in this way you should ensure that you use
+an absolute path in a UNIX-style format, e.g. `/c/mydir/boost-1.30.2'.
+
+To build, simply run `make' in the root directory of the asio source kit.

asio/configure.in

@@ -1,6 +1,7 @@
 AC_INIT(include/asio.hpp)
 AM_INIT_AUTOMAKE(asio, 0.1.2)
 
+AC_CANONICAL_HOST
 AM_PROG_CC_C_O
 AC_PROG_CXX
 AC_LANG(C++)
@@ -12,13 +13,16 @@ AC_ARG_WITH(boost,
   AC_HELP_STRING([--with-boost=DIR],[location of boost distribution]),
 [
   CPPFLAGS="$CPPFLAGS -I${withval}"
-  LDFLAGS="$LDFLAGS -L${withval}/libs/thread/build/bin-stage"
 ],
 [
-  BOOSTDIR="`pwd`/../boost_1_30_0"
+  BOOSTDIR="`pwd`/../boost-1.30.2"
   if test -d "${BOOSTDIR}"; then
     CPPFLAGS="$CPPFLAGS -I${BOOSTDIR}"
-    LDFLAGS="$LDFLAGS -L${BOOSTDIR}/libs/thread/build/bin-stage"
+  else
+    BOOSTDIR="`pwd`/../boost_1_30_0"
+    if test -d "${BOOSTDIR}"; then
+      CPPFLAGS="$CPPFLAGS -I${BOOSTDIR}"
+    fi
   fi
 ])
 
@@ -29,6 +33,16 @@ AC_CHECK_HEADER([boost/noncopyable.hpp],,
   exit 1
 ],[])
 
+case $host in
+  *-*-linux*)
+    CXXFLAGS="$CXXFLAGS -pthread"
+    LDFLAGS="$LDFLAGS -pthread"
+    ;;
+  *-*-mingw32*)
+    LIBS="$LIBS -lws2_32"
+    ;;
+esac
+
 if test "$GXX" = yes; then
   CXXFLAGS="$CXXFLAGS -ftemplate-depth-32"
 fi

asio/src/Makefile.am

@@ -18,40 +18,30 @@ noinst_PROGRAMS = \
 AM_CXXFLAGS = -I../include
 
 ___bin_dispatcher_test_SOURCES = tests/dispatcher_test.cpp
-___bin_dispatcher_test_LDADD = -lpthread
 
 ___bin_dgram_echo_server_test_SOURCES = tests/dgram_echo_server_test.cpp
-___bin_dgram_echo_server_test_LDADD = -lpthread
 
 ___bin_dgram_echo_client_test_SOURCES = tests/dgram_echo_client_test.cpp
-___bin_dgram_echo_client_test_LDADD = -lpthread
 
 ___bin_echo_client_test_SOURCES = tests/echo_client_test.cpp
-___bin_echo_client_test_LDADD = -lpthread
 
 ___bin_echo_server_test_SOURCES = tests/echo_server_test.cpp
-___bin_echo_server_test_LDADD = -lpthread
 
 ___bin_socket_accept_test_SOURCES = tests/socket_accept_test.cpp
-___bin_socket_accept_test_LDADD = -lpthread
 
 ___bin_timed_accept_test_SOURCES = tests/timed_accept_test.cpp
-___bin_timed_accept_test_LDADD = -lpthread
 
 ___bin_timed_connect_test_SOURCES = tests/timed_connect_test.cpp
-___bin_timed_connect_test_LDADD = -lpthread
 
 ___bin_timed_dgram_recv_test_SOURCES = tests/timed_dgram_recv_test.cpp
-___bin_timed_dgram_recv_test_LDADD = -lpthread
 
 ___bin_timer_test_SOURCES = tests/timer_test.cpp
-___bin_timer_test_LDADD = -lpthread
 
 ___bin_tpc_echo_server_test_SOURCES = tests/tpc_echo_server_test.cpp
-___bin_tpc_echo_server_test_LDADD = -lpthread
 
 EXTRA_DIST = \
 	Makefile.bor \
+	Makefile.mgw \
 	Makefile.msc
 
 MAINTAINERCLEANFILES = \

asio/src/Makefile.bor

@@ -1,5 +1,5 @@
 !ifndef BOOSTDIR
-BOOSTDIR = ../../boost_1_30_0
+BOOSTDIR = ../../boost-1.30.2
 !endif
 
 CXXFLAGS = -q -O2 -v -vi -y -a8 -b -Ve- -Vx- -tWM -tWR -tWC -w-inl -w-par -I../include -I$(BOOSTDIR)

asio/src/Makefile.mgw

@@ -1,5 +1,5 @@
 ifndef BOOSTDIR
-BOOSTDIR = ../../boost_1_30_0
+BOOSTDIR = ../../boost-1.30.2
 endif
 
 CXXFLAGS = -g -O3 -Wall -I../include -I$(BOOSTDIR)

asio/src/Makefile.msc

@@ -1,5 +1,5 @@
 !ifndef BOOSTDIR
-BOOSTDIR = ../../boost_1_30_0
+BOOSTDIR = ../../boost-1.30.2
 !endif
 
 CXXFLAGS = -nologo -O2 -GX -GR -Zi -w -MD -I. -I../include -I$(BOOSTDIR)