freetype/CHANGES

LATEST CHANGES - 

  - major directory hierarchy re-organisation. This was done for two things:
  
      * first, to ease the "manual" compilation of the library by requiring
        at lot less include paths :-)
        
      * second, to allow external programs to effectively access internal
        data fields. For example, this can be extremely useful if someone
        wants to write a font producer or a font manager on top of FreeType.

    Basically, you should now use the 'freetype/' prefix for header inclusion,
    as in:
    
        #include <freetype/freetype.h>
        #include <freetype/ftglyph.h>

    Some new include sub-directories are available:
    
     a. the "freetype/config" directory, contains two files used to
        configure the build of the library. Client applications should
        not need to look at these normally, but they can if they want.
        
        #include <freetype/config/ftoption.h>
        #include <freetype/config/ftconfig.h>
     
     b. the "freetype/internal" directory, contains header files that
        describes library internals. These are the header files that were
        previously found in the "src/base" and "src/shared" directories.


    As usual, the build system and the demos have been updated to reflect
    the change..
    
    Here's a layout of the new directory hierarchy:
    
    TOP
      include/
         freetype/
            freetype.h
            ...
            config/
              ftoption.h
              ftconfig.h
              ftmodule.h
              
            internal/
              ftobjs.h
              ftstream.h
              ftcalc.h
              ...
            
      src/
         base/
            ...
            
         sfnt/
         psnames/
         truetype/
         type1/
         type1z/


    Compiling a module is now much easier, for example, the following should
    work when in the TOP directory on an ANSI system:
    
       gcc -c -I./include -I./src/base src/base/ftbase.c
       gcc -c -I./include -I./src/sfnt src/sfnt/sfnt.c
       etc..

    (of course, using -Iconfig/<system> if you provide system-specific
     configuration files).


  - updated the structure of FT_Outline_Funcs in order to allow
    direct coordinate scaling within the outline decomposition routine
    (this is important for virtual "on" points with TrueType outlines)
    + updates to the rasters to support this..

  - updated the OS/2 table loading code in "src/sfnt/ttload.c" in order
    to support version 2 of the table (see OpenType 1.2 spec)

  - created "include/tttables.h" and "include/t1tables.h" to allow
    client applications to access some of the SFNT and T1 tables of a
    face with a procedural interface (see FT_Get_Sfnt_Table())
    + updates to internal source files to reflect the change..

  - some cleanups in the source code to get rid of warnings when compiling
    with the "-Wall -W -ansi -pedantic" options in gcc.

  - debugged and moved the smooth renderer to "src/base/ftgrays.c" and
    its header to "include/ftgrays.h"

  - updated TT_MAX_SUBGLYPHS to 96 as some CJK fonts have composites with
    up to 80 sub-glyphs !! Thanks to Werner

================================================================================
OLD CHANGES - 14-apr-2000

  - fixed a bug in the TrueType glyph loader that prevented the correct
    loading of some CJK glyphs in mingli.ttf
    
  - improved the standard Type 1 hinter in "src/type1"
  
  - fixed two bugs in the experimental Type 1 driver in "src/type1z"
    to handle the new XFree86 4.0 fonts (and a few other ones..)

  - the smooth renderer is now complete and supports sub-banding
    to render large glyphs at high speed. However, it is still located
    in "demos/src/ftgrays.c" and should move to the library itself
    in the next beta.. NOTE: The smooth renderer doesn't compile in
    stand-alone mode anymore, but this should be fixed RSN..
    
  - introduced convenience functions to more easily deal with glyph
    images, see "include/ftglyph.h" for more details, as well as the
    new demo program named "demos/src/ftstring.c" that demonstrates
    its use

  - implemented FT_LOAD_NO_RECURSE in both the TrueType and Type 1
    drivers (this is required by the auto-hinter to improve its results).

  - changed the raster interface, in order to allow client applications
    to provide their own span-drawing callbacks. However, only the
    smooth renderer supports this. See "FT_Raster_Params" in the
    file "include/ftimage.h"

  - fixed a small bug in FT_MulFix that caused incorrect transform
    computation !!

  - Note: The tutorial is out-of-date, grumpf.. :-(

================================================================================
OLD CHANGES - 12-mar-2000

  - changed the layout of configuration files : now, all ANSI configuration
    files are located in "freetype2/config". System-specific over-rides
    can be placed in "freetype2/config/<system>".
    
  - moved all configuration macros to "config/ftoption.h"
  
  - improvements in the Type 1 driver with AFM support
  
  - changed the fields in the FT_Outline structure : the old "flags"
    array is re-named "tags", while all ancient flags are encoded into
    a single unsigned int named "flags".

  - introduced new flags in FT_Outline.flags (see ft_outline_.... enums in
    "ftimage.h").

  - changed outline functions to "FT_Outline_<action>" syntax

  - added a smooth anti-alias renderer to the demonstration programs
  - added Mac graphics driver (thanks Just)
  
  - FT_Open_Face changed in order to received a pointer to a FT_Open_Args
    descriptor..
  
  - various cleanups, a few more API functions implemented (see FT_Attach_File)

  - updated some docs

================================================================================
OLD CHANGES - 22-feb-2000

  - introduced the "psnames" module. It is used to:

      o convert a Postscript glyph name into the equivalent Unicode
        character code (used by the Type 1 driver(s) to synthetize
        on the fly a Unicode charmap).

      o provide an interface to retrieve the Postscript names of
        the Macintosh, Adobe Standard & Adobe Expert character codes.
        (the Macintosh names are used by the SFNT-module postscript
         names support routines, while the other two tables are used
         by the Type 1 driver(s)).

  - introduced the "type1z" alternate Type 1 driver. This is a (still
    experimental) driver for the Type 1 format that will ultimately
    replace the one in "src/type1". It uses pattern matching to load
    data from the font, instead of a finite state analyzer. It works
    much better than the "old" driver with "broken" fonts. It is also
    much smaller (under 15 Kb).

  - the Type 1 drivers (both in "src/type1" and "src/type1z") are
    nearly complete. They both provide automatic Unicode charmap
    synthesis through the "psnames" module. No re-encoding vector
    is needed. (note that they still leak memory due to some code
    missing, and I'm getting lazy).

    Trivial AFM support has been added to read kerning information
    but wasn't exactly tested as it should ;-)

  - The TrueType glyph loader has been seriously rewritten (see the
    file "src/truetype/ttgload.c". It is now much, much simpler as
    well as easier to read, maintain and understand :-) Preliminary
    versions introduced a memory leak that has been reported by Jack
    Davis, and is now fixed..

  - introduced the new "ft_glyph_format_plotter", used to represent
    stroked outlines like Windows "Vector" fonts, and certain Type 1
    fonts like "Hershey". The corresponding raster will be written
    soon.

  - FT_New_Memory_Face is gone. Likewise, FT_Open_Face has a new
    interface that uses a structure to describe the input stream,
    the driver (if required), etc..

TODO
  - Write FT_Get_Glyph_Bitmap and FT_Load_Glyph_Bitmap

  - Add a function like FT_Load_Character( face, char_code, load_flags )
    that would really embbed a call to FT_Get_Char_Index then FT_Load_Glyph
    to ease developer's work.

  - Update the tutorial !!
  - consider adding support for Multiple Master fonts in the Type 1
    drivers.

  - Test the AFM routines of the Type 1 drivers to check that kerning
    information is returned correctly.

  - write a decent auto-gridding component !! We need this to release
    FreeType 2.0 gold !


----- less urgent needs : ----------
  - add a CFF/Type2 driver
  - add a BDF driver
  - add a FNT/PCF/HBF driver
  - add a Speedo driver from the X11 sources


==============================================================================
OLDER CHANGES - 27-jan-2000

  - updated the "sfnt" module interface to allow several SFNT-based
    drivers to co-exist peacefully
    
  - updated the "T1_Face" type to better separate Postscript font content
    from the rest of the FT_Face structure. Might be used later by the
    CFF/Type2 driver..
    
  - added an experimental replacement Type 1 driver featuring advanced
    (and speedy) pattern matching to retrieve the data from postscript
    fonts.

  - very minor changes in the implementation of FT_Set_Char_Size and
    FT_Set_Pixel_Sizes (they now implement default to ligthen the
    font driver's code).


=============================================================================
OLD MESSAGE

This file summarizes the changes that occured since the last "beta" of FreeType 2.
Because the list is important, it has been divided into separate sections:

Table Of Contents:

    I   High-Level Interface (easier !)
   II   Directory Structure
  III   Glyph Image Formats
   IV   Build System
    V   Portability
   VI   Font Drivers

-----------------------------------------------------------------------------------------
High-Level Interface :

  The high-level API has been considerably simplified. Here is how :

    - resource objects have disappeared. this means that face objects can
      now be created with a single function call (see FT_New_Face and
      FT_Open_Face)
    
    - when calling either FT_New_Face & FT_Open_Face, a size object and a
      glyph slot object are automatically created for the face, and can be
      accessed through "face->glyph" and "face->size" if one really needs to.
      In most cases, there's no need to call FT_New_Size or FT_New_Glyph.
    
    - similarly, FT_Load_Glyph now only takes a "face" argument (instead of
      a glyph slot and a size). Also, it's "result" parameter is gone, as
      the glyph image type is returned in the field "face->glyph.format"
    
    - the list of available charmaps is directly accessible through
      "face->charmaps", counting "face->num_charmaps" elements. Each
      charmap has an 'encoding' field which specifies which known encoding
      it deals with. Valid values are, for example :
    
          ft_encoding_unicode      (for ASCII, Latin-1 and Unicode)
          ft_encoding_apple_roman
          ft_encoding_sjis
          ft_encoding_adobe_standard
          ft_encoding_adobe_expert
    
      other values may be added in the future. Each charmap still holds its
      "platform_id" and "encoding_id" values in case the encoding is too
      exotic for the current library


-----------------------------------------------------------------------------------------
Directory Structure:

  Should seem obvious to most of you:

     freetype/
         config/        -- configuration sub-makefiles
            ansi/
            unix/       -- platform-specific configuration files
            win32/
            os2/
            msdos/

         include/       -- public header files, those to be included directly
                           by client apps

         src/           -- sources of the library
           base/        -- the base layer
           sfnt/        -- the sfnt "driver" (see the drivers section below)
           truetype/    -- the truetype driver
           type1/       -- the type1 driver
           shared/      -- some header files shared between drivers

         demos/         -- demos/tools

         docs/          -- documentation (a bit empty for now)

-----------------------------------------------------------------------------------------
Glyph Image Formats :

  Drivers are now able to register new glyph image formats within the library.
  For now, the base layer supports of course bitmaps and vector outlines, but
  one could imagine something different like colored bitmaps, bi-color
  vectors or wathever else (Metafonts anyone ??).

  See the file `include/ftimage.h'. Note also that the type FT_Raster_Map is
  gone, and is now replaced by FT_Bitmap, which should encompass all known
  bitmap types.

  Each new image format must provide at least one "raster", i.e. a module
  capable of transforming the glyph image into a bitmap. It's also possible
  to change the default raster used for a given glyph image format.

  The default outline scan-converter now uses 128 levels of grays by default,
  which tends to smooth many things. Note that the demo programs have been
  updated significantly in order to display these..


-----------------------------------------------------------------------------------------
Build system :

  You still need GNU Make to build the library. The build system has been
  very seriously re-vamped in order to provide things like :

   - automatic host platform detection (reverting to 'config/ansi'
     if it is not detected, with pseudo-standard compilation flags)

   - the ability to compile from the Makefiles with very different and
     exotic compilers. Note that linking the library can be difficult for
     some platforms.

     For example, the file `config/win32/lcclib.bat' is invoked by the
     build system to create the ".lib" file with LCC-Win32 because its
     librarian has too many flaws to be invoked directly from the Makefile.

  Here's how it works :

  - the first time you type `make', the build system runs a series of
    sub-makefiles in order to detect your host platform. It then dumps
    what it found, and creates a file called `config.mk' in the current
    directory. This is a sub-Makefile used to define many important Make
    variables used to build the library.

  - the second time, the build system detects the `config.mk' then use it
    to build the library. All object files go into 'obj' by default, as
    well as the library file, but  this can easily be changed.

  Note that you can run "make setup" to force another host platform detection
  even if a `config.mk' is present in the current directory. Another solution
  is simply to delete the file, then re-run make.

  Finally, the default compiler for all platforms is gcc (for now, this will
  hopefully changed in the future). You can however specify a different
  compiler by specifying it after the 'setup' target as in :

      gnumake setup lcc         on Win32 to use the LCC compiler
      gnumake setup visualc     on Win32 to use Visual C++

  See the file `config/<system>/detect.mk' for a list of supported compilers
  for your platforms.

  It should be relatively easy to write new detection rules files and
  config.mk..

  Finally, to build the demo programs, go to `demos' and launch GNU Make,
  it will use the `config.mk' in the top directory to build the test
  programs..

-----------------------------------------------------------------------------------------
Portability :

  In the previous beta, a single FT_System object was used to encompass
  all low-level operations like thread synchronisation, memory management
  and i/o access. This has been greatly simplified :

    - thread synchronisation has been dropped, for the simple reason that
      the library is already re-entrant, and that if you really need two
      threads accessing the same FT_Library, you should really synchronize
      access to it yourself with a simple mutex.

    - memory management is performed through a very simple object called
      "FT_Memory", which really is a table containing a table of pointers
      to functions like malloc, realloc and free as well as some user data
      (closure).

    - resources have disappeared (they created more problems than they
      solved), and i/o management have been simplified greatly as a
      result. Streams are defined through FT_Stream objects, which can
      be either memory-based or disk-based.

      Note that each face has its own stream, which is closed only when
      the face object is destroyed. Hence, a function like TT_Flush_Face
      in 1.x cannot be directly supported. However, if you really need
      something like this, you can easily tailor your own streams to achieve
      the same feature at a lower level (and use FT_Open_Face instead of
      FT_New_Face to create the face).

  See the file "include/ftsystem.h" for more details, as well as the
  implementations found in "config/unix" and "config/ansi".


-----------------------------------------------------------------------------------------
Font Drivers :
  

  The Font Driver interface has been modified in order to support
  extensions & versioning.


  The list of the font drivers that are statically linked to the
  library at compile time is managed through a new configuration file
  called `config/<platform>/ftmodule.h'.

  This file is autogenerated when invoking `make modules'. This target
  will parse all sub-directories of 'src', looking for a "module.mk"
  rules file, used to describe the driver to the build system.

  Hence, one should call `make modules' each time a font driver is added
  or removed from the `src' directory.


  Finally, this version provides a "pseudo-driver" in `src/sfnt'. This
  driver doesn't support font files directly, but provides services used
  by all TrueType-like font drivers. Hence, its code is shared between
  the TrueType & OpenType font formats, and possibly more formats to
  come if we're lucky..

-----------------------------------------------------------------------------------------
Extensions support :

  The extensions support is inspired by the one found in 1.x.

  Now, each font driver has its own "extension registry", which lists
  which extensions are available for the font faces managed by the driver.

  Extension ids are now strings, rather than 4-byte tags, as this is
  usually more readable..

  Each extension has:
    - some data, associated to each face object
    - an interface (table of function pointers)

  An extension that is format-specific should simply register itself
  to the correct font driver. Here is some example code:

   // Registering an extensions
   //
   FT_Error  FT_Init_XXXX_Extension( FT_Library  library )
   {
     FT_DriverInterface*  tt_driver;

     driver = FT_Get_Driver( library, "truetype" );
     if (!driver) return FT_Err_Unimplemented_Feature;

     return FT_Register_Extension( driver, &extension_class );   
   }

   
   // Implementing the extensions
   //
   FT_Error  FT_Proceed_Extension_XXX( FT_Face  face )
   {
     FT_XXX_Extension            ext;
     FT_XXX_Extension_Interface  ext_interface;

     ext = FT_Get_Extension( face, "extensionid", &ext_interface );
     if (!ext) return error;

     return ext_interface->do_it(ext);
   }