glibc/nss/tst-nss-getpwent.c

114 lines
2.8 KiB
C
Raw Permalink Normal View History

/* Copyright (C) 2015-2022 Free Software Foundation, Inc.
CVE-2014-8121: Do not close NSS files database during iteration [BZ #18007] Robin Hack discovered Samba would enter an infinite loop processing certain quota-related requests. We eventually tracked this down to a glibc issue. Running a (simplified) test case under strace shows that /etc/passwd is continuously opened and closed: … open("/etc/passwd", O_RDONLY|O_CLOEXEC) = 3 lseek(3, 0, SEEK_CUR) = 0 read(3, "root:x:0:0:root:/root:/bin/bash\n"..., 4096) = 2717 lseek(3, 2717, SEEK_SET) = 2717 close(3) = 0 open("/etc/passwd", O_RDONLY|O_CLOEXEC) = 3 lseek(3, 0, SEEK_CUR) = 0 lseek(3, 0, SEEK_SET) = 0 read(3, "root:x:0:0:root:/root:/bin/bash\n"..., 4096) = 2717 lseek(3, 2717, SEEK_SET) = 2717 close(3) = 0 open("/etc/passwd", O_RDONLY|O_CLOEXEC) = 3 lseek(3, 0, SEEK_CUR) = 0 … The lookup function implementation in nss/nss_files/files-XXX.c:DB_LOOKUP has code to prevent that. It is supposed skip closing the input file if it was already open. /* Reset file pointer to beginning or open file. */ \ status = internal_setent (keep_stream); \ \ if (status == NSS_STATUS_SUCCESS) \ { \ /* Tell getent function that we have repositioned the file pointer. */ \ last_use = getby; \ \ while ((status = internal_getent (result, buffer, buflen, errnop \ H_ERRNO_ARG EXTRA_ARGS_VALUE)) \ == NSS_STATUS_SUCCESS) \ { break_if_match } \ \ if (! keep_stream) \ internal_endent (); \ } \ keep_stream is initialized from the stayopen flag in internal_setent. internal_setent is called from the set*ent implementation as: status = internal_setent (stayopen); However, for non-host database, this flag is always 0, per the STAYOPEN magic in nss/getXXent_r.c. Thus, the fix is this: - status = internal_setent (stayopen); + status = internal_setent (1); This is not a behavioral change even for the hosts database (where the application can specify the stayopen flag) because with a call to sethostent(0), the file handle is still not closed in the implementation of gethostent.
2015-04-29 12:41:25 +00:00
This file is part of the GNU C Library.
The GNU C Library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version.
The GNU C Library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public
License along with the GNU C Library; if not, see
Prefer https to http for gnu.org and fsf.org URLs Also, change sources.redhat.com to sourceware.org. This patch was automatically generated by running the following shell script, which uses GNU sed, and which avoids modifying files imported from upstream: sed -ri ' s,(http|ftp)(://(.*\.)?(gnu|fsf|sourceware)\.org($|[^.]|\.[^a-z])),https\2,g s,(http|ftp)(://(.*\.)?)sources\.redhat\.com($|[^.]|\.[^a-z]),https\2sourceware.org\4,g ' \ $(find $(git ls-files) -prune -type f \ ! -name '*.po' \ ! -name 'ChangeLog*' \ ! -path COPYING ! -path COPYING.LIB \ ! -path manual/fdl-1.3.texi ! -path manual/lgpl-2.1.texi \ ! -path manual/texinfo.tex ! -path scripts/config.guess \ ! -path scripts/config.sub ! -path scripts/install-sh \ ! -path scripts/mkinstalldirs ! -path scripts/move-if-change \ ! -path INSTALL ! -path locale/programs/charmap-kw.h \ ! -path po/libc.pot ! -path sysdeps/gnu/errlist.c \ ! '(' -name configure \ -execdir test -f configure.ac -o -f configure.in ';' ')' \ ! '(' -name preconfigure \ -execdir test -f preconfigure.ac ';' ')' \ -print) and then by running 'make dist-prepare' to regenerate files built from the altered files, and then executing the following to cleanup: chmod a+x sysdeps/unix/sysv/linux/riscv/configure # Omit irrelevant whitespace and comment-only changes, # perhaps from a slightly-different Autoconf version. git checkout -f \ sysdeps/csky/configure \ sysdeps/hppa/configure \ sysdeps/riscv/configure \ sysdeps/unix/sysv/linux/csky/configure # Omit changes that caused a pre-commit check to fail like this: # remote: *** error: sysdeps/powerpc/powerpc64/ppc-mcount.S: trailing lines git checkout -f \ sysdeps/powerpc/powerpc64/ppc-mcount.S \ sysdeps/unix/sysv/linux/s390/s390-64/syscall.S # Omit change that caused a pre-commit check to fail like this: # remote: *** error: sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S: last line does not end in newline git checkout -f sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S
2019-09-07 05:40:42 +00:00
<https://www.gnu.org/licenses/>. */
CVE-2014-8121: Do not close NSS files database during iteration [BZ #18007] Robin Hack discovered Samba would enter an infinite loop processing certain quota-related requests. We eventually tracked this down to a glibc issue. Running a (simplified) test case under strace shows that /etc/passwd is continuously opened and closed: … open("/etc/passwd", O_RDONLY|O_CLOEXEC) = 3 lseek(3, 0, SEEK_CUR) = 0 read(3, "root:x:0:0:root:/root:/bin/bash\n"..., 4096) = 2717 lseek(3, 2717, SEEK_SET) = 2717 close(3) = 0 open("/etc/passwd", O_RDONLY|O_CLOEXEC) = 3 lseek(3, 0, SEEK_CUR) = 0 lseek(3, 0, SEEK_SET) = 0 read(3, "root:x:0:0:root:/root:/bin/bash\n"..., 4096) = 2717 lseek(3, 2717, SEEK_SET) = 2717 close(3) = 0 open("/etc/passwd", O_RDONLY|O_CLOEXEC) = 3 lseek(3, 0, SEEK_CUR) = 0 … The lookup function implementation in nss/nss_files/files-XXX.c:DB_LOOKUP has code to prevent that. It is supposed skip closing the input file if it was already open. /* Reset file pointer to beginning or open file. */ \ status = internal_setent (keep_stream); \ \ if (status == NSS_STATUS_SUCCESS) \ { \ /* Tell getent function that we have repositioned the file pointer. */ \ last_use = getby; \ \ while ((status = internal_getent (result, buffer, buflen, errnop \ H_ERRNO_ARG EXTRA_ARGS_VALUE)) \ == NSS_STATUS_SUCCESS) \ { break_if_match } \ \ if (! keep_stream) \ internal_endent (); \ } \ keep_stream is initialized from the stayopen flag in internal_setent. internal_setent is called from the set*ent implementation as: status = internal_setent (stayopen); However, for non-host database, this flag is always 0, per the STAYOPEN magic in nss/getXXent_r.c. Thus, the fix is this: - status = internal_setent (stayopen); + status = internal_setent (1); This is not a behavioral change even for the hosts database (where the application can specify the stayopen flag) because with a call to sethostent(0), the file handle is still not closed in the implementation of gethostent.
2015-04-29 12:41:25 +00:00
#include <nss.h>
CVE-2014-8121: Do not close NSS files database during iteration [BZ #18007] Robin Hack discovered Samba would enter an infinite loop processing certain quota-related requests. We eventually tracked this down to a glibc issue. Running a (simplified) test case under strace shows that /etc/passwd is continuously opened and closed: … open("/etc/passwd", O_RDONLY|O_CLOEXEC) = 3 lseek(3, 0, SEEK_CUR) = 0 read(3, "root:x:0:0:root:/root:/bin/bash\n"..., 4096) = 2717 lseek(3, 2717, SEEK_SET) = 2717 close(3) = 0 open("/etc/passwd", O_RDONLY|O_CLOEXEC) = 3 lseek(3, 0, SEEK_CUR) = 0 lseek(3, 0, SEEK_SET) = 0 read(3, "root:x:0:0:root:/root:/bin/bash\n"..., 4096) = 2717 lseek(3, 2717, SEEK_SET) = 2717 close(3) = 0 open("/etc/passwd", O_RDONLY|O_CLOEXEC) = 3 lseek(3, 0, SEEK_CUR) = 0 … The lookup function implementation in nss/nss_files/files-XXX.c:DB_LOOKUP has code to prevent that. It is supposed skip closing the input file if it was already open. /* Reset file pointer to beginning or open file. */ \ status = internal_setent (keep_stream); \ \ if (status == NSS_STATUS_SUCCESS) \ { \ /* Tell getent function that we have repositioned the file pointer. */ \ last_use = getby; \ \ while ((status = internal_getent (result, buffer, buflen, errnop \ H_ERRNO_ARG EXTRA_ARGS_VALUE)) \ == NSS_STATUS_SUCCESS) \ { break_if_match } \ \ if (! keep_stream) \ internal_endent (); \ } \ keep_stream is initialized from the stayopen flag in internal_setent. internal_setent is called from the set*ent implementation as: status = internal_setent (stayopen); However, for non-host database, this flag is always 0, per the STAYOPEN magic in nss/getXXent_r.c. Thus, the fix is this: - status = internal_setent (stayopen); + status = internal_setent (1); This is not a behavioral change even for the hosts database (where the application can specify the stayopen flag) because with a call to sethostent(0), the file handle is still not closed in the implementation of gethostent.
2015-04-29 12:41:25 +00:00
#include <pwd.h>
#include <stdbool.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <support/support.h>
CVE-2014-8121: Do not close NSS files database during iteration [BZ #18007] Robin Hack discovered Samba would enter an infinite loop processing certain quota-related requests. We eventually tracked this down to a glibc issue. Running a (simplified) test case under strace shows that /etc/passwd is continuously opened and closed: … open("/etc/passwd", O_RDONLY|O_CLOEXEC) = 3 lseek(3, 0, SEEK_CUR) = 0 read(3, "root:x:0:0:root:/root:/bin/bash\n"..., 4096) = 2717 lseek(3, 2717, SEEK_SET) = 2717 close(3) = 0 open("/etc/passwd", O_RDONLY|O_CLOEXEC) = 3 lseek(3, 0, SEEK_CUR) = 0 lseek(3, 0, SEEK_SET) = 0 read(3, "root:x:0:0:root:/root:/bin/bash\n"..., 4096) = 2717 lseek(3, 2717, SEEK_SET) = 2717 close(3) = 0 open("/etc/passwd", O_RDONLY|O_CLOEXEC) = 3 lseek(3, 0, SEEK_CUR) = 0 … The lookup function implementation in nss/nss_files/files-XXX.c:DB_LOOKUP has code to prevent that. It is supposed skip closing the input file if it was already open. /* Reset file pointer to beginning or open file. */ \ status = internal_setent (keep_stream); \ \ if (status == NSS_STATUS_SUCCESS) \ { \ /* Tell getent function that we have repositioned the file pointer. */ \ last_use = getby; \ \ while ((status = internal_getent (result, buffer, buflen, errnop \ H_ERRNO_ARG EXTRA_ARGS_VALUE)) \ == NSS_STATUS_SUCCESS) \ { break_if_match } \ \ if (! keep_stream) \ internal_endent (); \ } \ keep_stream is initialized from the stayopen flag in internal_setent. internal_setent is called from the set*ent implementation as: status = internal_setent (stayopen); However, for non-host database, this flag is always 0, per the STAYOPEN magic in nss/getXXent_r.c. Thus, the fix is this: - status = internal_setent (stayopen); + status = internal_setent (1); This is not a behavioral change even for the hosts database (where the application can specify the stayopen flag) because with a call to sethostent(0), the file handle is still not closed in the implementation of gethostent.
2015-04-29 12:41:25 +00:00
int
do_test (void)
{
__nss_configure_lookup ("passwd", "files");
CVE-2014-8121: Do not close NSS files database during iteration [BZ #18007] Robin Hack discovered Samba would enter an infinite loop processing certain quota-related requests. We eventually tracked this down to a glibc issue. Running a (simplified) test case under strace shows that /etc/passwd is continuously opened and closed: … open("/etc/passwd", O_RDONLY|O_CLOEXEC) = 3 lseek(3, 0, SEEK_CUR) = 0 read(3, "root:x:0:0:root:/root:/bin/bash\n"..., 4096) = 2717 lseek(3, 2717, SEEK_SET) = 2717 close(3) = 0 open("/etc/passwd", O_RDONLY|O_CLOEXEC) = 3 lseek(3, 0, SEEK_CUR) = 0 lseek(3, 0, SEEK_SET) = 0 read(3, "root:x:0:0:root:/root:/bin/bash\n"..., 4096) = 2717 lseek(3, 2717, SEEK_SET) = 2717 close(3) = 0 open("/etc/passwd", O_RDONLY|O_CLOEXEC) = 3 lseek(3, 0, SEEK_CUR) = 0 … The lookup function implementation in nss/nss_files/files-XXX.c:DB_LOOKUP has code to prevent that. It is supposed skip closing the input file if it was already open. /* Reset file pointer to beginning or open file. */ \ status = internal_setent (keep_stream); \ \ if (status == NSS_STATUS_SUCCESS) \ { \ /* Tell getent function that we have repositioned the file pointer. */ \ last_use = getby; \ \ while ((status = internal_getent (result, buffer, buflen, errnop \ H_ERRNO_ARG EXTRA_ARGS_VALUE)) \ == NSS_STATUS_SUCCESS) \ { break_if_match } \ \ if (! keep_stream) \ internal_endent (); \ } \ keep_stream is initialized from the stayopen flag in internal_setent. internal_setent is called from the set*ent implementation as: status = internal_setent (stayopen); However, for non-host database, this flag is always 0, per the STAYOPEN magic in nss/getXXent_r.c. Thus, the fix is this: - status = internal_setent (stayopen); + status = internal_setent (1); This is not a behavioral change even for the hosts database (where the application can specify the stayopen flag) because with a call to sethostent(0), the file handle is still not closed in the implementation of gethostent.
2015-04-29 12:41:25 +00:00
/* Count the number of entries in the password database, and fetch
data from the first and last entries. */
size_t count = 0;
struct passwd * pw;
char *first_name = NULL;
uid_t first_uid = 0;
char *last_name = NULL;
uid_t last_uid = 0;
setpwent ();
while ((pw = getpwent ()) != NULL)
{
if (first_name == NULL)
{
first_name = xstrdup (pw->pw_name);
CVE-2014-8121: Do not close NSS files database during iteration [BZ #18007] Robin Hack discovered Samba would enter an infinite loop processing certain quota-related requests. We eventually tracked this down to a glibc issue. Running a (simplified) test case under strace shows that /etc/passwd is continuously opened and closed: … open("/etc/passwd", O_RDONLY|O_CLOEXEC) = 3 lseek(3, 0, SEEK_CUR) = 0 read(3, "root:x:0:0:root:/root:/bin/bash\n"..., 4096) = 2717 lseek(3, 2717, SEEK_SET) = 2717 close(3) = 0 open("/etc/passwd", O_RDONLY|O_CLOEXEC) = 3 lseek(3, 0, SEEK_CUR) = 0 lseek(3, 0, SEEK_SET) = 0 read(3, "root:x:0:0:root:/root:/bin/bash\n"..., 4096) = 2717 lseek(3, 2717, SEEK_SET) = 2717 close(3) = 0 open("/etc/passwd", O_RDONLY|O_CLOEXEC) = 3 lseek(3, 0, SEEK_CUR) = 0 … The lookup function implementation in nss/nss_files/files-XXX.c:DB_LOOKUP has code to prevent that. It is supposed skip closing the input file if it was already open. /* Reset file pointer to beginning or open file. */ \ status = internal_setent (keep_stream); \ \ if (status == NSS_STATUS_SUCCESS) \ { \ /* Tell getent function that we have repositioned the file pointer. */ \ last_use = getby; \ \ while ((status = internal_getent (result, buffer, buflen, errnop \ H_ERRNO_ARG EXTRA_ARGS_VALUE)) \ == NSS_STATUS_SUCCESS) \ { break_if_match } \ \ if (! keep_stream) \ internal_endent (); \ } \ keep_stream is initialized from the stayopen flag in internal_setent. internal_setent is called from the set*ent implementation as: status = internal_setent (stayopen); However, for non-host database, this flag is always 0, per the STAYOPEN magic in nss/getXXent_r.c. Thus, the fix is this: - status = internal_setent (stayopen); + status = internal_setent (1); This is not a behavioral change even for the hosts database (where the application can specify the stayopen flag) because with a call to sethostent(0), the file handle is still not closed in the implementation of gethostent.
2015-04-29 12:41:25 +00:00
first_uid = pw->pw_uid;
}
free (last_name);
last_name = xstrdup (pw->pw_name);
CVE-2014-8121: Do not close NSS files database during iteration [BZ #18007] Robin Hack discovered Samba would enter an infinite loop processing certain quota-related requests. We eventually tracked this down to a glibc issue. Running a (simplified) test case under strace shows that /etc/passwd is continuously opened and closed: … open("/etc/passwd", O_RDONLY|O_CLOEXEC) = 3 lseek(3, 0, SEEK_CUR) = 0 read(3, "root:x:0:0:root:/root:/bin/bash\n"..., 4096) = 2717 lseek(3, 2717, SEEK_SET) = 2717 close(3) = 0 open("/etc/passwd", O_RDONLY|O_CLOEXEC) = 3 lseek(3, 0, SEEK_CUR) = 0 lseek(3, 0, SEEK_SET) = 0 read(3, "root:x:0:0:root:/root:/bin/bash\n"..., 4096) = 2717 lseek(3, 2717, SEEK_SET) = 2717 close(3) = 0 open("/etc/passwd", O_RDONLY|O_CLOEXEC) = 3 lseek(3, 0, SEEK_CUR) = 0 … The lookup function implementation in nss/nss_files/files-XXX.c:DB_LOOKUP has code to prevent that. It is supposed skip closing the input file if it was already open. /* Reset file pointer to beginning or open file. */ \ status = internal_setent (keep_stream); \ \ if (status == NSS_STATUS_SUCCESS) \ { \ /* Tell getent function that we have repositioned the file pointer. */ \ last_use = getby; \ \ while ((status = internal_getent (result, buffer, buflen, errnop \ H_ERRNO_ARG EXTRA_ARGS_VALUE)) \ == NSS_STATUS_SUCCESS) \ { break_if_match } \ \ if (! keep_stream) \ internal_endent (); \ } \ keep_stream is initialized from the stayopen flag in internal_setent. internal_setent is called from the set*ent implementation as: status = internal_setent (stayopen); However, for non-host database, this flag is always 0, per the STAYOPEN magic in nss/getXXent_r.c. Thus, the fix is this: - status = internal_setent (stayopen); + status = internal_setent (1); This is not a behavioral change even for the hosts database (where the application can specify the stayopen flag) because with a call to sethostent(0), the file handle is still not closed in the implementation of gethostent.
2015-04-29 12:41:25 +00:00
last_uid = pw->pw_uid;
++count;
}
endpwent ();
if (count == 0)
{
printf ("No entries in the password database.\n");
return 0;
}
/* Try again, this time interleaving with name-based and UID-based
lookup operations. The counts do not match if the interleaved
lookups affected the enumeration. */
size_t new_count = 0;
setpwent ();
while ((pw = getpwent ()) != NULL)
{
if (new_count == count)
{
printf ("Additional entry in the password database.\n");
return 1;
}
++new_count;
struct passwd *pw2 = getpwnam (first_name);
if (pw2 == NULL)
{
printf ("getpwnam (%s) failed: %m\n", first_name);
return 1;
}
pw2 = getpwnam (last_name);
if (pw2 == NULL)
{
printf ("getpwnam (%s) failed: %m\n", last_name);
return 1;
}
pw2 = getpwuid (first_uid);
if (pw2 == NULL)
{
printf ("getpwuid (%llu) failed: %m\n",
(unsigned long long) first_uid);
return 1;
}
pw2 = getpwuid (last_uid);
if (pw2 == NULL)
{
printf ("getpwuid (%llu) failed: %m\n",
(unsigned long long) last_uid);
return 1;
}
}
endpwent ();
if (new_count < count)
{
printf ("Missing entry in the password database.\n");
return 1;
}
return 0;
}
#define TIMEOUT 300
#include <support/test-driver.c>