glibc/sysdeps/hppa/hppa1.1/addmul_1.S

;! HP-PA-1.1 __mpn_addmul_1 -- Multiply a limb vector with a limb and
;! add the result to a second limb vector.

;! Copyright (C) 1992-2022 Free Software Foundation, Inc.

;! This file is part of the GNU MP Library.

;! The GNU MP Library is free software; you can redistribute it and/or modify
;! it under the terms of the GNU Lesser General Public License as published by
;! the Free Software Foundation; either version 2.1 of the License, or (at your
;! option) any later version.

;! The GNU MP Library is distributed in the hope that it will be useful, but
;! WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
;! or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU Lesser General Public
;! License for more details.

;! You should have received a copy of the GNU Lesser General Public License
;! along with the GNU MP Library.  If not, see
;! <https://www.gnu.org/licenses/>.


;! INPUT PARAMETERS
;! res_ptr	r26
;! s1_ptr	r25
;! size		r24
;! s2_limb	r23

;! This runs at 11 cycles/limb on a PA7000.  With the used instructions, it
;! can not become faster due to data cache contention after a store.  On the
;! PA7100 it runs at 10 cycles/limb, and that can not be improved either,
;! since only the xmpyu does not need the integer pipeline, so the only
;! dual-issue we will get are addc+xmpyu.  Unrolling could gain a cycle/limb
;! on the PA7100.

;! There are some ideas described in mul_1.s that applies to this code too.

	.text
	.export		__mpn_addmul_1
__mpn_addmul_1:
	.proc
	.callinfo	frame=64,no_calls
	.entry

	ldo		64(%r30),%r30
	fldws,ma	4(%r25),%fr5
	stw		%r23,-16(%r30)		;! move s2_limb ...
	addib,=		-1,%r24,L$just_one_limb
	 fldws		-16(%r30),%fr4		;! ... into fr4
	add		%r0,%r0,%r0		;! clear carry
	xmpyu		%fr4,%fr5,%fr6
	fldws,ma	4(%r25),%fr7
	fstds		%fr6,-16(%r30)
	xmpyu		%fr4,%fr7,%fr8
	ldw		-12(%r30),%r20		;! least significant limb in product
	ldw		-16(%r30),%r28

	fstds		%fr8,-16(%r30)
	addib,=		-1,%r24,L$end
	 ldw		-12(%r30),%r1

;! Main loop
L$loop:
	ldws		0(%r26),%r29
	fldws,ma	4(%r25),%fr5
	add		%r29,%r20,%r20
	stws,ma		%r20,4(%r26)
	addc		%r28,%r1,%r20
	xmpyu		%fr4,%fr5,%fr6
	ldw		-16(%r30),%r28
	fstds		%fr6,-16(%r30)
	addc		%r0,%r28,%r28
	addib,<>	-1,%r24,L$loop
	 ldw		-12(%r30),%r1

L$end:
	ldw		0(%r26),%r29
	add		%r29,%r20,%r20
	stws,ma		%r20,4(%r26)
	addc		%r28,%r1,%r20
	ldw		-16(%r30),%r28
	ldws		0(%r26),%r29
	addc		%r0,%r28,%r28
	add		%r29,%r20,%r20
	stws,ma		%r20,4(%r26)
	addc		%r0,%r28,%r28
	bv		0(%r2)
	ldo		-64(%r30),%r30

L$just_one_limb:
	xmpyu		%fr4,%fr5,%fr6
	ldw		0(%r26),%r29
	fstds		%fr6,-16(%r30)
	ldw		-12(%r30),%r1
	ldw		-16(%r30),%r28
	add		%r29,%r1,%r20
	stw		%r20,0(%r26)
	addc		%r0,%r28,%r28
	bv		0(%r2)
	 ldo		-64(%r30),%r30

	.exit
	.procend
Don't use %r19 (linkage table pointer). 2000-10-15 03:22:34 +00:00			`;! HP-PA-1.1 __mpn_addmul_1 -- Multiply a limb vector with a limb and`
			`;! add the result to a second limb vector.`
Updated from ../=mpn/gmp-1.906.7 1995-10-16 01:18:40 +00:00
Update copyright dates with scripts/update-copyrights I used these shell commands: ../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright (cd ../glibc && git commit -am"[this commit message]") and then ignored the output, which consisted lines saying "FOO: warning: copyright statement not found" for each of 7061 files FOO. I then removed trailing white space from math/tgmath.h, support/tst-support-open-dev-null-range.c, and sysdeps/x86_64/multiarch/strlen-vec.S, to work around the following obscure pre-commit check failure diagnostics from Savannah. I don't know why I run into these diagnostics whereas others evidently do not. remote: * 912-#endif remote: * 913: remote: * 914- remote: * error: lines with trailing whitespace found ... remote: *** error: sysdeps/unix/sysv/linux/statx_cp.c: trailing lines 2022-01-01 18:54:23 +00:00			`;! Copyright (C) 1992-2022 Free Software Foundation, Inc.`
Updated from ../=mpn/gmp-1.906.7 1995-10-16 01:18:40 +00:00
Don't use %r19 (linkage table pointer). 2000-10-15 03:22:34 +00:00			`;! This file is part of the GNU MP Library.`
Updated from ../=mpn/gmp-1.906.7 1995-10-16 01:18:40 +00:00
Don't use %r19 (linkage table pointer). 2000-10-15 03:22:34 +00:00			`;! The GNU MP Library is free software; you can redistribute it and/or modify`
Put under LGPL v2.1. 2001-07-07 10:13:33 +00:00			`;! it under the terms of the GNU Lesser General Public License as published by`
			`;! the Free Software Foundation; either version 2.1 of the License, or (at your`
Don't use %r19 (linkage table pointer). 2000-10-15 03:22:34 +00:00			`;! option) any later version.`
Updated from ../=mpn/gmp-1.906.7 1995-10-16 01:18:40 +00:00
Don't use %r19 (linkage table pointer). 2000-10-15 03:22:34 +00:00			`;! The GNU MP Library is distributed in the hope that it will be useful, but`
			`;! WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY`
Put under LGPL v2.1. 2001-07-07 10:13:33 +00:00			`;! or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public`
Don't use %r19 (linkage table pointer). 2000-10-15 03:22:34 +00:00			`;! License for more details.`
Updated from ../=mpn/gmp-1.906.7 1995-10-16 01:18:40 +00:00
Put under LGPL v2.1. 2001-07-07 10:13:33 +00:00			`;! You should have received a copy of the GNU Lesser General Public License`
Replace FSF snail mail address by URL. 2012-03-09 23:56:38 +00:00			`;! along with the GNU MP Library. If not, see`
Prefer https to http for gnu.org and fsf.org URLs Also, change sources.redhat.com to sourceware.org. This patch was automatically generated by running the following shell script, which uses GNU sed, and which avoids modifying files imported from upstream: sed -ri ' s,(http\|ftp)(://(.\.)?(gnu\|fsf\|sourceware)\.org($\|[^.]\|\.[^a-z])),https\2,g s,(http\|ftp)(://(.\.)?)sources\.redhat\.com($\|[^.]\|\.[^a-z]),https\2sourceware.org\4,g ' \ $(find $(git ls-files) -prune -type f \ ! -name '.po' \ ! -name 'ChangeLog' \ ! -path COPYING ! -path COPYING.LIB \ ! -path manual/fdl-1.3.texi ! -path manual/lgpl-2.1.texi \ ! -path manual/texinfo.tex ! -path scripts/config.guess \ ! -path scripts/config.sub ! -path scripts/install-sh \ ! -path scripts/mkinstalldirs ! -path scripts/move-if-change \ ! -path INSTALL ! -path locale/programs/charmap-kw.h \ ! -path po/libc.pot ! -path sysdeps/gnu/errlist.c \ ! '(' -name configure \ -execdir test -f configure.ac -o -f configure.in ';' ')' \ ! '(' -name preconfigure \ -execdir test -f preconfigure.ac ';' ')' \ -print) and then by running 'make dist-prepare' to regenerate files built from the altered files, and then executing the following to cleanup: chmod a+x sysdeps/unix/sysv/linux/riscv/configure # Omit irrelevant whitespace and comment-only changes, # perhaps from a slightly-different Autoconf version. git checkout -f \ sysdeps/csky/configure \ sysdeps/hppa/configure \ sysdeps/riscv/configure \ sysdeps/unix/sysv/linux/csky/configure # Omit changes that caused a pre-commit check to fail like this: # remote: * error: sysdeps/powerpc/powerpc64/ppc-mcount.S: trailing lines git checkout -f \ sysdeps/powerpc/powerpc64/ppc-mcount.S \ sysdeps/unix/sysv/linux/s390/s390-64/syscall.S # Omit change that caused a pre-commit check to fail like this: # remote: * error: sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S: last line does not end in newline git checkout -f sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S 2019-09-07 05:40:42 +00:00			`;! <https://www.gnu.org/licenses/>.`
Updated from ../=mpn/gmp-1.906.7 1995-10-16 01:18:40 +00:00

Don't use %r19 (linkage table pointer). 2000-10-15 03:22:34 +00:00			`;! INPUT PARAMETERS`
			`;! res_ptr r26`
			`;! s1_ptr r25`
			`;! size r24`
			`;! s2_limb r23`
Updated from ../=mpn/gmp-1.906.7 1995-10-16 01:18:40 +00:00
Don't use %r19 (linkage table pointer). 2000-10-15 03:22:34 +00:00			`;! This runs at 11 cycles/limb on a PA7000. With the used instructions, it`
			`;! can not become faster due to data cache contention after a store. On the`
			`;! PA7100 it runs at 10 cycles/limb, and that can not be improved either,`
			`;! since only the xmpyu does not need the integer pipeline, so the only`
			`;! dual-issue we will get are addc+xmpyu. Unrolling could gain a cycle/limb`
			`;! on the PA7100.`
Updated from ../=mpn/gmp-1.906.7 1995-10-16 01:18:40 +00:00
Don't use %r19 (linkage table pointer). 2000-10-15 03:22:34 +00:00			`;! There are some ideas described in mul_1.s that applies to this code too.`
Updated from ../=mpn/gmp-1.906.7 1995-10-16 01:18:40 +00:00
Don't use %r19 (linkage table pointer). 2000-10-15 03:22:34 +00:00			`.text`
Updated from ../=mpn/gmp-1.906.7 1995-10-16 01:18:40 +00:00			`.export __mpn_addmul_1`
Remove trailing whitespace in ports. 2013-06-05 20:26:40 +00:00			`__mpn_addmul_1:`
Updated from ../=mpn/gmp-1.906.7 1995-10-16 01:18:40 +00:00			`.proc`
			`.callinfo frame=64,no_calls`
			`.entry`

			`ldo 64(%r30),%r30`
			`fldws,ma 4(%r25),%fr5`
Don't use %r19 (linkage table pointer). 2000-10-15 03:22:34 +00:00			`stw %r23,-16(%r30) ;! move s2_limb ...`
Updated from ../=mpn/gmp-1.906.7 1995-10-16 01:18:40 +00:00			`addib,= -1,%r24,L$just_one_limb`
Don't use %r19 (linkage table pointer). 2000-10-15 03:22:34 +00:00			`fldws -16(%r30),%fr4 ;! ... into fr4`
			`add %r0,%r0,%r0 ;! clear carry`
Updated from ../=mpn/gmp-1.906.7 1995-10-16 01:18:40 +00:00			`xmpyu %fr4,%fr5,%fr6`
			`fldws,ma 4(%r25),%fr7`
			`fstds %fr6,-16(%r30)`
			`xmpyu %fr4,%fr7,%fr8`
Don't use %r19 (linkage table pointer). 2000-10-15 03:22:34 +00:00			`ldw -12(%r30),%r20 ;! least significant limb in product`
Updated from ../=mpn/gmp-1.906.7 1995-10-16 01:18:40 +00:00			`ldw -16(%r30),%r28`

			`fstds %fr8,-16(%r30)`
			`addib,= -1,%r24,L$end`
			`ldw -12(%r30),%r1`

Don't use %r19 (linkage table pointer). 2000-10-15 03:22:34 +00:00			`;! Main loop`
Remove trailing whitespace in ports. 2013-06-05 20:26:40 +00:00			`L$loop:`
Don't use %r19 (linkage table pointer). 2000-10-15 03:22:34 +00:00			`ldws 0(%r26),%r29`
Updated from ../=mpn/gmp-1.906.7 1995-10-16 01:18:40 +00:00			`fldws,ma 4(%r25),%fr5`
Don't use %r19 (linkage table pointer). 2000-10-15 03:22:34 +00:00			`add %r29,%r20,%r20`
			`stws,ma %r20,4(%r26)`
			`addc %r28,%r1,%r20`
Updated from ../=mpn/gmp-1.906.7 1995-10-16 01:18:40 +00:00			`xmpyu %fr4,%fr5,%fr6`
			`ldw -16(%r30),%r28`
			`fstds %fr6,-16(%r30)`
			`addc %r0,%r28,%r28`
			`addib,<> -1,%r24,L$loop`
			`ldw -12(%r30),%r1`

Remove trailing whitespace in ports. 2013-06-05 20:26:40 +00:00			`L$end:`
Don't use %r19 (linkage table pointer). 2000-10-15 03:22:34 +00:00			`ldw 0(%r26),%r29`
			`add %r29,%r20,%r20`
			`stws,ma %r20,4(%r26)`
			`addc %r28,%r1,%r20`
Updated from ../=mpn/gmp-1.906.7 1995-10-16 01:18:40 +00:00			`ldw -16(%r30),%r28`
			`ldws 0(%r26),%r29`
			`addc %r0,%r28,%r28`
Don't use %r19 (linkage table pointer). 2000-10-15 03:22:34 +00:00			`add %r29,%r20,%r20`
			`stws,ma %r20,4(%r26)`
Updated from ../=mpn/gmp-1.906.7 1995-10-16 01:18:40 +00:00			`addc %r0,%r28,%r28`
			`bv 0(%r2)`
Don't use %r19 (linkage table pointer). 2000-10-15 03:22:34 +00:00			`ldo -64(%r30),%r30`
Updated from ../=mpn/gmp-1.906.7 1995-10-16 01:18:40 +00:00
Remove trailing whitespace in ports. 2013-06-05 20:26:40 +00:00			`L$just_one_limb:`
Updated from ../=mpn/gmp-1.906.7 1995-10-16 01:18:40 +00:00			`xmpyu %fr4,%fr5,%fr6`
			`ldw 0(%r26),%r29`
			`fstds %fr6,-16(%r30)`
			`ldw -12(%r30),%r1`
			`ldw -16(%r30),%r28`
Don't use %r19 (linkage table pointer). 2000-10-15 03:22:34 +00:00			`add %r29,%r1,%r20`
			`stw %r20,0(%r26)`
Updated from ../=mpn/gmp-1.906.7 1995-10-16 01:18:40 +00:00			`addc %r0,%r28,%r28`
			`bv 0(%r2)`
			`ldo -64(%r30),%r30`

			`.exit`
			`.procend`