glibc/sysdeps/sparc/sparc64/multiarch/memcpy-memmove-niagara7.S

981 lines
28 KiB
ArmAsm
Raw Normal View History

sparc: M7 optimized memcpy/mempcpy/memmove Support added to identify Sparc M7/T7/S7/M8/T8 processor capability. Performance tests run on Sparc S7 using new code and old niagara4 code. Optimizations for memcpy also apply to mempcpy and memmove where they share code. Optimizations for memset also apply to bzero as they share code. For memcpy/mempcpy/memmove, performance comparison with niagara4 code: Long word aligned data 0-127 bytes - minimal changes 128-1023 bytes - 7-30% gain 1024+ bytes - 1-7% gain (in cache); 30-100% gain (out of cache) Word aligned data 0-127 bytes - 50%+ gain 128-1023 bytes - 10-200% gain 1024+ bytes - 0-15% gain (in cache); 5-50% gain (out of cache) Unaligned data 0-127 bytes - 0-70%+ gain 128-447 bytes - 40-80%+ gain 448-511 bytes - 1-3% loss 512-4096 bytes - 2-3% gain (in cache); 0-20% gain (out of cache) 4096+ bytes - ± 3% (in cache); 20-50% gain (out of cache) Tested in sparcv9-*-* and sparc64-*-* targets in both multi and non-multi arch configurations. Patrick McGehearty <patrick.mcgehearty@oracle.com> Adhemerval Zanella <adhemerval.zanella@linaro.org> * sysdeps/sparc/sparc32/sparcv9/multiarch/Makefile (sysdeps_routines): Add memcpy-memmove-niagara7 and memmove-ultra1. * sysdeps/sparc/sparc64/multiarch/Makefile (sysdeps_routines): Likewise. * sysdeps/sparc/sparc32/sparcv9/multiarch/memcpy-memmove-niagara7.S: New file. * sysdeps/sparc/sparc32/sparcv9/multiarch/memmove-ultra1.S: Likewise. * sysdeps/sparc/sparc32/sparcv9/multiarch/rtld-memmove.c: Likewise. * sysdeps/sparc/sparc64/multiarch/ifunc-impl-list.c (__libc_ifunc_impl_list): Add __memcpy_niagara7, __mempcpy_niagara7, and __memmove_niagara7. * sysdeps/sparc/sparc64/multiarch/ifunc-memcpy.h (IFUNC_SELECTOR): Add niagara7 option. * sysdeps/sparc/sparc64/multiarch/memmove.c: New file. * sysdeps/sparc/sparc64/multiarch/ifunc-memmove.h: Likewise. * sysdeps/sparc/sparc64/multiarch/memcpy-memmove-niagara7.S: Likewise. * sysdeps/sparc/sparc64/multiarch/memmove-ultra1.S: Likewise. * sysdeps/sparc/sparc64/multiarch/rtld-memmove.c: Likewise.
2017-12-13 20:12:17 +00:00
/* Copy SIZE bytes from SRC to DEST. For SUN4V M7.
Copyright (C) 2017 Free Software Foundation, Inc.
This file is part of the GNU C Library.
The GNU C Library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version.
The GNU C Library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public
License along with the GNU C Library; if not, see
<http://www.gnu.org/licenses/>. */
#include <sysdep.h>
#ifndef XCC
# define XCC xcc
#endif
.register %g2,#scratch
.register %g3,#scratch
.register %g6,#scratch
#define FPRS_FEF 0x04
/*
* ASI_STBI_P marks the cache line as "least recently used"
* which means if many threads are active, it has a high chance
* of being pushed out of the cache between the first initializing
* store and the final stores.
* Thus, in this algorithm we use ASI_STBIMRU_P which marks the
* cache line as "most recently used" for all but the last cache
* line.
*/
#define ASI_BLK_INIT_QUAD_LDD_P 0xe2
#define ASI_ST_BLK_INIT_MRU_P 0xf2
#define ASI_STBI_P ASI_BLK_INIT_QUAD_LDD_P
#define ASI_STBIMRU_P ASI_ST_BLK_INIT_MRU_P
#define BLOCK_SIZE 64 /* L2 data cache line size */
#define SHORTCOPY 3
#define SHORTCHECK 14
#define SHORT_LONG 64 /* max copy for short longword-aligned case */
/* must be at least 64 */
#define SMALL_MAX 255 /* max small copy for word/long aligned */
#define SMALL_UMAX 128 /* max small copy for unaligned case */
#define MED_WMAX 1023 /* max copy for medium word-aligned case */
#define MED_MAX 511 /* max copy for medium longword-aligned case */
#define ST_CHUNK 20 /* ST_CHUNK - block of values for BIS Store */
/* on T4, prefetch 20 is a strong read prefetch to L1 and L2 data cache
* prefetch 20 can cause inst pipeline to delay if data is in memory
* prefetch 21 is a strong read prefetch to L2 data cache, not L1 data cache */
#define ALIGN_PRE 20 /* distance for aligned prefetch loop */
#define EX_ST(x) x
#define EX_RETVAL(x) x
#define STORE_ASI(src,addr) stxa src, [addr] ASI_STBIMRU_P
#define STORE_INIT(src,addr) stxa src, [addr] ASI_STBI_P
#if IS_IN (libc)
.text
ENTRY(__memmove_niagara7)
/* %o0=dst, %o1=src, %o2=len */
cmp %o1, %o0 /* if from address is >= to use forward copy */
bgeu,pn %XCC, .Lforcpy /* else use backward if ... */
sub %o0, %o1, %o4 /* get difference of two addresses */
cmp %o2, %o4 /* compare size and difference of addresses */
bleu,pn %XCC, .Lforcpy /* if size is bigger, do overlapped copy */
add %o1, %o2, %o5 /* get to end of source space */
/* an overlapped copy that must be done "backwards" */
.Lchksize:
cmp %o2, 8 /* less than 8 byte do byte copy */
blu,pn %XCC, 2f /* else continue */
/* Now size is bigger than 8 */
.Ldbalign:
add %o0, %o2, %g1 /* get to end of dest space */
andcc %g1, 7, %o3 /* %o3 has cnt til dst 8 byte align */
bz,a,pn %XCC, .Ldbbck /* skip if dst is 8 byte aligned */
andn %o2, 7, %o3 /* force %o3 cnt to multiple of 8 */
sub %o2, %o3, %o2 /* update o2 with new count */
1: dec %o5 /* decrement source */
ldub [%o5], %g1 /* load one byte */
deccc %o3 /* decrement count */
bgu,pt %XCC, 1b /* if not done keep copying */
stb %g1, [%o5+%o4] /* store one byte into dest */
andncc %o2, 7, %o3 /* force %o3 cnt to multiple of 8 */
bz,pn %XCC, 2f /* if size < 8, move to byte copy */
/* Now Destination is 8 byte aligned */
.Ldbbck:
andcc %o5, 7, %o0 /* %o0 has src offset */
bz,a,pn %XCC, .Ldbcopybc /* if src is aligned do fast memmove */
sub %o2, %o3, %o2 /* Residue bytes in %o2 */
.Lcpy_dbwdbc: /* alignment of src is needed */
sub %o2, 8, %o2 /* set size one loop ahead */
sll %o0, 3, %g1 /* %g1 is left shift */
mov 64, %g5 /* init %g5 to be 64 */
sub %g5, %g1, %g5 /* %g5 rightshift = (64 - leftshift) */
sub %o5, %o0, %o5 /* align the src at 8 bytes. */
add %o4, %o0, %o4 /* increase diff between src & dst */
ldx [%o5], %o1 /* load first 8 bytes */
srlx %o1, %g5, %o1
1: sub %o5, 8, %o5 /* subtract 8 from src */
ldx [%o5], %o0 /* load 8 byte */
sllx %o0, %g1, %o3 /* shift loaded val left to tmp reg */
or %o1, %o3, %o3 /* align data */
stx %o3, [%o5+%o4] /* store 8 byte */
subcc %o2, 8, %o2 /* subtract 8 byte from size */
bg,pt %XCC, 1b /* if size > 0 continue */
srlx %o0, %g5, %o1 /* move extra byte for the next use */
srl %g1, 3, %o0 /* restore %o0 value for alignment */
add %o5, %o0, %o5 /* restore src alignment */
sub %o4, %o0, %o4 /* restore diff between src & dest */
ba 2f /* branch to the trailing byte copy */
add %o2, 8, %o2 /* restore size value */
.Ldbcopybc: /* alignment of src is not needed */
1: sub %o5, 8, %o5 /* subtract from src */
ldx [%o5], %g1 /* load 8 bytes */
subcc %o3, 8, %o3 /* subtract from size */
bgu,pt %XCC, 1b /* if size is bigger 0 continue */
stx %g1, [%o5+%o4] /* store 8 bytes to destination */
ba 2f
nop
.Lbcbyte:
1: ldub [%o5], %g1 /* load one byte */
stb %g1, [%o5+%o4] /* store one byte */
2: deccc %o2 /* decrement size */
bgeu,a,pt %XCC, 1b /* if size is >= 0 continue */
dec %o5 /* decrement from address */
.Lexitbc: /* exit from backward copy */
retl
add %o5, %o4, %o0 /* restore dest addr */
/* Check to see if memmove is large aligned copy
* If so, use special version of copy that avoids
* use of block store init. */
.Lforcpy:
cmp %o2, SMALL_MAX /* check for not small case */
blt,pn %XCC, .Lmv_short /* merge with memcpy */
mov %o0, %g1 /* save %o0 */
neg %o0, %o5
andcc %o5, 7, %o5 /* bytes till DST 8 byte aligned */
brz,pt %o5, .Lmv_dst_aligned_on_8
/* %o5 has the bytes to be written in partial store. */
sub %o2, %o5, %o2
sub %o1, %o0, %o1 /* %o1 gets the difference */
7: /* dst aligning loop */
ldub [%o1+%o0], %o4 /* load one byte */
subcc %o5, 1, %o5
stb %o4, [%o0]
bgu,pt %XCC, 7b
add %o0, 1, %o0 /* advance dst */
add %o1, %o0, %o1 /* restore %o1 */
.Lmv_dst_aligned_on_8:
andcc %o1, 7, %o5
brnz,pn %o5, .Lsrc_dst_unaligned_on_8
prefetch [%o1 + (1 * BLOCK_SIZE)], 20
.Lmv_src_dst_aligned_on_8:
/* check if we are copying MED_MAX or more bytes */
cmp %o2, MED_MAX /* limit to store buffer size */
bleu,pt %XCC, .Lmedlong
prefetch [%o1 + (2 * BLOCK_SIZE)], 20
/* The mv_align loop below mimics the memcpy code for large aligned copies,
* but does not use the ASI_STBI_P (block initializing store) performance
* optimization. This is used when memcpy is incorrectly invoked with
* overlapping buffers. */
.Lmv_large_align8_copy: /* Src and dst share 8 byte align */
/* align dst to 64 byte boundary */
andcc %o0, 0x3f, %o3 /* check for dst 64 byte aligned */
brz,pn %o3, .Lmv_aligned_on_64
sub %o3, 64, %o3 /* %o3 has negative bytes to move */
add %o2, %o3, %o2 /* adjust remaining count */
.Lmv_align_to_64:
ldx [%o1], %o4
add %o1, 8, %o1 /* increment src ptr */
addcc %o3, 8, %o3
stx %o4, [%o0]
brnz,pt %o3, .Lmv_align_to_64
add %o0, 8, %o0 /* increment dst ptr */
.Lmv_aligned_on_64:
andn %o2, 0x3f, %o5 /* %o5 is multiple of block size */
and %o2, 0x3f, %o2 /* residue bytes in %o2 */
.Lmv_align_loop:
ldx [%o1],%o4
stx %o4,[%o0]
prefetch [%o0 + (10 * BLOCK_SIZE)], 22
prefetch [%o1 + (10 * BLOCK_SIZE)], 21
subcc %o5, 64, %o5
ldx [%o1+8],%o4
stx %o4,[%o0+8]
ldx [%o1+16],%o4
stx %o4,[%o0+16]
ldx [%o1+24],%o4
stx %o4,[%o0+24]
ldx [%o1+32],%o4
stx %o4,[%o0+32]
ldx [%o1+40],%o4
stx %o4,[%o0+40]
ldx [%o1+48],%o4
add %o1, 64, %o1
stx %o4,[%o0+48]
add %o0, 64, %o0
ldx [%o1-8],%o4
bgt,pt %XCC, .Lmv_align_loop
stx %o4,[%o0-8]
ba .Lmedlong
nop
END(__memmove_niagara7)
ENTRY(__mempcpy_niagara7)
/* %o0=dst, %o1=src, %o2=len */
ba,pt %icc, 101f
add %o0, %o2, %g1 /* save dst + len */
END(__mempcpy_niagara7)
.align 32
ENTRY(__memcpy_niagara7)
100: /* %o0=dst, %o1=src, %o2=len */
mov %o0, %g1 /* save %o0 */
101:
#ifndef __arch64__
srl %o2, 0, %o2
#endif
cmp %o2, SMALL_MAX /* check for not small case */
bgeu,pn %XCC, .Lmedium /* go to larger cases */
.Lmv_short:
cmp %o2, SHORTCOPY /* check for really short case */
ble,pn %XCC, .Lsmallfin
or %o0, %o1, %o4 /* prepare alignment check */
andcc %o4, 0x3, %o5 /* test for word alignment */
bnz,pn %XCC, .Lsmallunalign /* branch to non-word aligned case */
nop
subcc %o2, 7, %o2 /* adjust count */
ble,pn %XCC, .Lsmallwordx
andcc %o4, 0x7, %o5 /* test for long alignment */
/* 8 or more bytes, src and dest start on word boundary
* %o4 contains or %o0, %o1 */
.Lsmalllong:
bnz,pn %XCC, .Lsmallwords /* branch to word aligned case */
cmp %o2, SHORT_LONG-7
bge,a %XCC, .Lmedl64 /* if we branch */
sub %o2,56,%o2 /* adjust %o2 to -63 off count */
/* slightly unroll the small_long_loop to improve very short copies */
cmp %o2, 32-7
blt,a,pn %XCC, .Lsmall_long_l
sub %o1, %o0, %o1 /* %o1 gets the difference */
ldx [%o1], %o5
ldx [%o1+8], %o4
ldx [%o1+16], %o3
subcc %o2, 24, %o2
sub %o1, %o0, %o1 /* %o1 gets the difference */
stx %o5, [%o0] /* write word */
stx %o4, [%o0+8] /* write word */
stx %o3, [%o0+16] /* write word */
add %o0, 24, %o0
/* end loop unroll */
.Lsmall_long_l:
ldx [%o1+%o0], %o3
subcc %o2, 8, %o2
add %o0, 8, %o0
bgu,pn %XCC, .Lsmall_long_l /* loop until done */
stx %o3, [%o0-8] /* write word */
addcc %o2, 7, %o2 /* restore %o2 to correct count */
bnz,pn %XCC, .Lsmall_long_x /* check for completion */
add %o1, %o0, %o1 /* restore %o1 */
retl
mov EX_RETVAL(%g1), %o0 /* restore %o0 */
.Lsmall_long_x:
cmp %o2, 4 /* check for 4 or more bytes left */
blt,pn %XCC, .Lsmallleft3 /* if not, go to finish up */
nop
lduw [%o1], %o3
add %o1, 4, %o1
subcc %o2, 4, %o2
stw %o3, [%o0]
bnz,pn %XCC, .Lsmallleft3
add %o0, 4, %o0
retl
mov EX_RETVAL(%g1), %o0 /* restore %o0 */
.align 32
/* src and dest start on word boundary; 7 or fewer bytes */
.Lsmallwordx:
lduw [%o1], %o3 /* read word */
addcc %o2, 3, %o2 /* restore count */
bz,pt %XCC, .Lsmallexit
stw %o3, [%o0] /* write word */
deccc %o2 /* reduce count for cc test */
ldub [%o1+4], %o3 /* load one byte */
bz,pt %XCC, .Lsmallexit
stb %o3, [%o0+4] /* store one byte */
ldub [%o1+5], %o3 /* load second byte */
deccc %o2
bz,pt %XCC, .Lsmallexit
stb %o3, [%o0+5] /* store second byte */
ldub [%o1+6], %o3 /* load third byte */
stb %o3, [%o0+6] /* store third byte */
.Lsmallexit:
retl
mov EX_RETVAL(%g1), %o0 /* restore %o0 */
.align 32
.Lsmallunalign:
cmp %o2, SHORTCHECK
ble,pn %XCC, .Lsmallrest
cmp %o2, SMALL_UMAX
bge,pt %XCC, .Lmedium_join
andcc %o1, 0x3, %o5 /* is src word aligned */
bz,pn %XCC, .Laldst
cmp %o5, 2 /* is src half-word aligned */
be,pt %XCC, .Ls2algn
cmp %o5, 3 /* src is byte aligned */
.Ls1algn:
ldub [%o1], %o3 /* move 1 or 3 bytes to align it */
inc 1, %o1
stb %o3, [%o0] /* move a byte to align src */
inc 1, %o0
bne,pt %XCC, .Ls2algn
dec %o2
b .Lald /* now go align dest */
andcc %o0, 0x3, %o5
.Ls2algn:
lduh [%o1], %o3 /* know src is 2 byte aligned */
inc 2, %o1
srl %o3, 8, %o4
stb %o4, [%o0] /* have to do bytes, */
stb %o3, [%o0 + 1] /* do not know dst alignment */
inc 2, %o0
dec 2, %o2
.Laldst:
andcc %o0, 0x3, %o5 /* align the destination address */
.Lald:
bz,pn %XCC, .Lw4cp
cmp %o5, 2
be,pn %XCC, .Lw2cp
cmp %o5, 3
.Lw3cp: lduw [%o1], %o4
inc 4, %o1
srl %o4, 24, %o5
stb %o5, [%o0]
bne,pt %XCC, .Lw1cp
inc %o0
dec 1, %o2
andn %o2, 3, %o3 /* %o3 is aligned word count */
dec 4, %o3 /* avoid reading beyond tail of src */
sub %o1, %o0, %o1 /* %o1 gets the difference */
1: sll %o4, 8, %g5 /* save residual bytes */
lduw [%o1+%o0], %o4
deccc 4, %o3
srl %o4, 24, %o5 /* merge with residual */
or %o5, %g5, %g5
st %g5, [%o0]
bnz,pt %XCC, 1b
inc 4, %o0
sub %o1, 3, %o1 /* used one byte of last word read */
and %o2, 3, %o2
b 7f
inc 4, %o2
.Lw1cp: srl %o4, 8, %o5
sth %o5, [%o0]
inc 2, %o0
dec 3, %o2
andn %o2, 3, %o3 /* %o3 is aligned word count */
dec 4, %o3 /* avoid reading beyond tail of src */
sub %o1, %o0, %o1 /* %o1 gets the difference */
2: sll %o4, 24, %g5 /* save residual bytes */
lduw [%o1+%o0], %o4
deccc 4, %o3
srl %o4, 8, %o5 /* merge with residual */
or %o5, %g5, %g5
st %g5, [%o0]
bnz,pt %XCC, 2b
inc 4, %o0
sub %o1, 1, %o1 /* used 3 bytes of last word read */
and %o2, 3, %o2
b 7f
inc 4, %o2
.Lw2cp: lduw [%o1], %o4
inc 4, %o1
srl %o4, 16, %o5
sth %o5, [%o0]
inc 2, %o0
dec 2, %o2
andn %o2, 3, %o3 /* %o3 is aligned word count */
dec 4, %o3 /* avoid reading beyond tail of src */
sub %o1, %o0, %o1 /* %o1 gets the difference */
3: sll %o4, 16, %g5 /* save residual bytes */
lduw [%o1+%o0], %o4
deccc 4, %o3
srl %o4, 16, %o5 /* merge with residual */
or %o5, %g5, %g5
st %g5, [%o0]
bnz,pt %XCC, 3b
inc 4, %o0
sub %o1, 2, %o1 /* used two bytes of last word read */
and %o2, 3, %o2
b 7f
inc 4, %o2
.Lw4cp: andn %o2, 3, %o3 /* %o3 is aligned word count */
sub %o1, %o0, %o1 /* %o1 gets the difference */
1: lduw [%o1+%o0], %o4 /* read from address */
deccc 4, %o3 /* decrement count */
st %o4, [%o0] /* write at destination address */
bgu,pt %XCC, 1b
inc 4, %o0 /* increment to address */
and %o2, 3, %o2 /* number of leftover bytes, if any */
/* simple finish up byte copy, works with any alignment */
7:
add %o1, %o0, %o1 /* restore %o1 */
.Lsmallrest:
tst %o2
bz,pt %XCC, .Lsmallx
cmp %o2, 4
blt,pn %XCC, .Lsmallleft3
nop
sub %o2, 3, %o2
.Lsmallnotalign4:
ldub [%o1], %o3 /* read byte */
subcc %o2, 4, %o2 /* reduce count by 4 */
stb %o3, [%o0] /* write byte */
ldub [%o1+1], %o3 /* repeat for total of 4 bytes */
add %o1, 4, %o1 /* advance SRC by 4 */
stb %o3, [%o0+1]
ldub [%o1-2], %o3
add %o0, 4, %o0 /* advance DST by 4 */
stb %o3, [%o0-2]
ldub [%o1-1], %o3
bgu,pt %XCC, .Lsmallnotalign4 /* loop til 3 or fewer bytes remain */
stb %o3, [%o0-1]
addcc %o2, 3, %o2 /* restore count */
bz,pt %XCC, .Lsmallx
.Lsmallleft3: /* 1, 2, or 3 bytes remain */
subcc %o2, 1, %o2
ldub [%o1], %o3 /* load one byte */
bz,pt %XCC, .Lsmallx
stb %o3, [%o0] /* store one byte */
ldub [%o1+1], %o3 /* load second byte */
subcc %o2, 1, %o2
bz,pt %XCC, .Lsmallx
stb %o3, [%o0+1] /* store second byte */
ldub [%o1+2], %o3 /* load third byte */
stb %o3, [%o0+2] /* store third byte */
.Lsmallx:
retl
mov EX_RETVAL(%g1), %o0 /* restore %o0 */
.Lsmallfin:
tst %o2
bnz,pn %XCC, .Lsmallleft3
nop
retl
mov EX_RETVAL(%g1), %o0 /* restore %o0 */
.align 16
.Lsmallwords:
lduw [%o1], %o3 /* read word */
subcc %o2, 8, %o2 /* update count */
stw %o3, [%o0] /* write word */
add %o1, 8, %o1 /* update SRC */
lduw [%o1-4], %o3 /* read word */
add %o0, 8, %o0 /* update DST */
bgu,pt %XCC, .Lsmallwords /* loop until done */
stw %o3, [%o0-4] /* write word */
addcc %o2, 7, %o2 /* restore count */
bz,pt %XCC, .Lsmallexit /* check for completion */
cmp %o2, 4 /* check for 4 or more bytes left */
blt,pt %XCC, .Lsmallleft3 /* if not, go to finish up */
nop
lduw [%o1], %o3
add %o1, 4, %o1
subcc %o2, 4, %o2
add %o0, 4, %o0
bnz,pn %XCC, .Lsmallleft3
stw %o3, [%o0-4]
retl
mov EX_RETVAL(%g1), %o0 /* restore %o0 */
.align 16
.Lmedium:
.Lmedium_join:
neg %o0, %o5
andcc %o5, 7, %o5 /* bytes till DST 8 byte aligned */
brz,pt %o5, .Ldst_aligned_on_8
/* %o5 has the bytes to be written in partial store. */
sub %o2, %o5, %o2
sub %o1, %o0, %o1 /* %o1 gets the difference */
7: /* dst aligning loop */
ldub [%o1+%o0], %o4 /* load one byte */
subcc %o5, 1, %o5
stb %o4, [%o0]
bgu,pt %XCC, 7b
add %o0, 1, %o0 /* advance dst */
add %o1, %o0, %o1 /* restore %o1 */
.Ldst_aligned_on_8:
andcc %o1, 7, %o5
brnz,pt %o5, .Lsrc_dst_unaligned_on_8
nop
.Lsrc_dst_aligned_on_8:
/* check if we are copying MED_MAX or more bytes */
cmp %o2, MED_MAX /* limit to store buffer size */
bgu,pn %XCC, .Llarge_align8_copy
nop
/*
* Special case for handling when src and dest are both long word aligned
* and total data to move is less than MED_MAX bytes
*/
.Lmedlong:
subcc %o2, 63, %o2 /* adjust length to allow cc test */
ble,pn %XCC, .Lmedl63 /* skip big loop if < 64 bytes */
nop
.Lmedl64:
ldx [%o1], %o4 /* load */
subcc %o2, 64, %o2 /* decrement length count */
stx %o4, [%o0] /* and store */
ldx [%o1+8], %o3 /* a block of 64 bytes */
stx %o3, [%o0+8]
ldx [%o1+16], %o4
stx %o4, [%o0+16]
ldx [%o1+24], %o3
stx %o3, [%o0+24]
ldx [%o1+32], %o4 /* load */
stx %o4, [%o0+32] /* and store */
ldx [%o1+40], %o3 /* a block of 64 bytes */
add %o1, 64, %o1 /* increase src ptr by 64 */
stx %o3, [%o0+40]
ldx [%o1-16], %o4
add %o0, 64, %o0 /* increase dst ptr by 64 */
stx %o4, [%o0-16]
ldx [%o1-8], %o3
bgu,pt %XCC, .Lmedl64 /* repeat if at least 64 bytes left */
stx %o3, [%o0-8]
.Lmedl63:
addcc %o2, 32, %o2 /* adjust remaining count */
ble,pt %XCC, .Lmedl31 /* to skip if 31 or fewer bytes left */
nop
ldx [%o1], %o4 /* load */
sub %o2, 32, %o2 /* decrement length count */
stx %o4, [%o0] /* and store */
ldx [%o1+8], %o3 /* a block of 32 bytes */
add %o1, 32, %o1 /* increase src ptr by 32 */
stx %o3, [%o0+8]
ldx [%o1-16], %o4
add %o0, 32, %o0 /* increase dst ptr by 32 */
stx %o4, [%o0-16]
ldx [%o1-8], %o3
stx %o3, [%o0-8]
.Lmedl31:
addcc %o2, 16, %o2 /* adjust remaining count */
ble,pt %XCC, .Lmedl15 /* skip if 15 or fewer bytes left */
nop
ldx [%o1], %o4 /* load and store 16 bytes */
add %o1, 16, %o1 /* increase src ptr by 16 */
stx %o4, [%o0]
sub %o2, 16, %o2 /* decrease count by 16 */
ldx [%o1-8], %o3
add %o0, 16, %o0 /* increase dst ptr by 16 */
stx %o3, [%o0-8]
.Lmedl15:
addcc %o2, 15, %o2 /* restore count */
bz,pt %XCC, .Lsmallexit /* exit if finished */
cmp %o2, 8
blt,pt %XCC, .Lmedw7 /* skip if 7 or fewer bytes left */
tst %o2
ldx [%o1], %o4 /* load 8 bytes */
add %o1, 8, %o1 /* increase src ptr by 8 */
add %o0, 8, %o0 /* increase dst ptr by 8 */
subcc %o2, 8, %o2 /* decrease count by 8 */
bnz,pn %XCC, .Lmedw7
stx %o4, [%o0-8] /* and store 8 bytes */
retl
mov EX_RETVAL(%g1), %o0 /* restore %o0 */
.align 16
.Lsrc_dst_unaligned_on_8:
/* DST is 8-byte aligned, src is not */
andcc %o1, 0x3, %o5 /* test word alignment */
bnz,pt %XCC, .Lunalignsetup /* branch if not word aligned */
nop
/*
* Handle all cases where src and dest are aligned on word
* boundaries. Use unrolled loops for better performance.
* This option wins over standard large data move when
* source and destination is in cache for medium
* to short data moves.
*/
cmp %o2, MED_WMAX /* limit to store buffer size */
bge,pt %XCC, .Lunalignrejoin /* otherwise rejoin main loop */
nop
subcc %o2, 31, %o2 /* adjust length to allow cc test */
/* for end of loop */
ble,pt %XCC, .Lmedw31 /* skip big loop if less than 16 */
.Lmedw32:
ld [%o1], %o4 /* move a block of 32 bytes */
sllx %o4, 32, %o5
ld [%o1+4], %o4
or %o4, %o5, %o5
stx %o5, [%o0]
subcc %o2, 32, %o2 /* decrement length count */
ld [%o1+8], %o4
sllx %o4, 32, %o5
ld [%o1+12], %o4
or %o4, %o5, %o5
stx %o5, [%o0+8]
add %o1, 32, %o1 /* increase src ptr by 32 */
ld [%o1-16], %o4
sllx %o4, 32, %o5
ld [%o1-12], %o4
or %o4, %o5, %o5
stx %o5, [%o0+16]
add %o0, 32, %o0 /* increase dst ptr by 32 */
ld [%o1-8], %o4
sllx %o4, 32, %o5
ld [%o1-4], %o4
or %o4, %o5, %o5
bgu,pt %XCC, .Lmedw32 /* repeat if at least 32 bytes left */
stx %o5, [%o0-8]
.Lmedw31:
addcc %o2, 31, %o2 /* restore count */
bz,pt %XCC, .Lsmallexit /* exit if finished */
cmp %o2, 16
blt,pt %XCC, .Lmedw15
nop
ld [%o1], %o4 /* move a block of 16 bytes */
sllx %o4, 32, %o5
subcc %o2, 16, %o2 /* decrement length count */
ld [%o1+4], %o4
or %o4, %o5, %o5
stx %o5, [%o0]
add %o1, 16, %o1 /* increase src ptr by 16 */
ld [%o1-8], %o4
add %o0, 16, %o0 /* increase dst ptr by 16 */
sllx %o4, 32, %o5
ld [%o1-4], %o4
or %o4, %o5, %o5
stx %o5, [%o0-8]
.Lmedw15:
bz,pt %XCC, .Lsmallexit /* exit if finished */
cmp %o2, 8
blt,pn %XCC, .Lmedw7 /* skip if 7 or fewer bytes left */
tst %o2
ld [%o1], %o4 /* load 4 bytes */
subcc %o2, 8, %o2 /* decrease count by 8 */
stw %o4, [%o0] /* and store 4 bytes */
add %o1, 8, %o1 /* increase src ptr by 8 */
ld [%o1-4], %o3 /* load 4 bytes */
add %o0, 8, %o0 /* increase dst ptr by 8 */
stw %o3, [%o0-4] /* and store 4 bytes */
bz,pt %XCC, .Lsmallexit /* exit if finished */
.Lmedw7: /* count is ge 1, less than 8 */
cmp %o2, 4 /* check for 4 bytes left */
blt,pn %XCC, .Lsmallleft3 /* skip if 3 or fewer bytes left */
nop
ld [%o1], %o4 /* load 4 bytes */
add %o1, 4, %o1 /* increase src ptr by 4 */
add %o0, 4, %o0 /* increase dst ptr by 4 */
subcc %o2, 4, %o2 /* decrease count by 4 */
bnz,pt %XCC, .Lsmallleft3
stw %o4, [%o0-4] /* and store 4 bytes */
retl
mov EX_RETVAL(%g1), %o0 /* restore %o0 */
.align 16
.Llarge_align8_copy: /* Src and dst 8 byte aligned */
/* align dst to 64 byte boundary */
andcc %o0, 0x3f, %o3 /* check for dst 64 byte aligned */
brz,pn %o3, .Laligned_to_64
andcc %o0, 8, %o3 /* odd long words to move? */
brz,pt %o3, .Laligned_to_16
nop
ldx [%o1], %o4
sub %o2, 8, %o2
add %o1, 8, %o1 /* increment src ptr */
add %o0, 8, %o0 /* increment dst ptr */
stx %o4, [%o0-8]
.Laligned_to_16:
andcc %o0, 16, %o3 /* pair of long words to move? */
brz,pt %o3, .Laligned_to_32
nop
ldx [%o1], %o4
sub %o2, 16, %o2
stx %o4, [%o0]
add %o1, 16, %o1 /* increment src ptr */
ldx [%o1-8], %o4
add %o0, 16, %o0 /* increment dst ptr */
stx %o4, [%o0-8]
.Laligned_to_32:
andcc %o0, 32, %o3 /* four long words to move? */
brz,pt %o3, .Laligned_to_64
nop
ldx [%o1], %o4
sub %o2, 32, %o2
stx %o4, [%o0]
ldx [%o1+8], %o4
stx %o4, [%o0+8]
ldx [%o1+16], %o4
stx %o4, [%o0+16]
add %o1, 32, %o1 /* increment src ptr */
ldx [%o1-8], %o4
add %o0, 32, %o0 /* increment dst ptr */
stx %o4, [%o0-8]
.Laligned_to_64:
/* Following test is included to avoid issues where existing executables
* incorrectly call memcpy with overlapping src and dest instead of memmove
*
* if ( (src ge dst) and (dst+len > src)) go to overlap case
* if ( (src lt dst) and (src+len > dst)) go to overlap case
*/
cmp %o1,%o0
bge,pt %XCC, 1f
nop
/* src+len > dst? */
add %o1, %o2, %o4
cmp %o4, %o0
bgt,pt %XCC, .Lmv_aligned_on_64
nop
ba 2f
nop
1:
/* dst+len > src? */
add %o0, %o2, %o4
cmp %o4, %o1
bgt,pt %XCC, .Lmv_aligned_on_64
nop
2:
/* handle non-overlapped copies
*
* Using block init store (BIS) instructions to avoid fetching cache
* lines from memory. Use ST_CHUNK stores to first element of each cache
* line (similar to prefetching) to avoid overfilling STQ or miss buffers.
* Gives existing cache lines time to be moved out of L1/L2/L3 cache.
*/
andn %o2, 0x3f, %o5 /* %o5 is multiple of block size */
and %o2, 0x3f, %o2 /* residue bytes in %o2 */
/* We use ASI_STBIMRU_P for the first store to each cache line
* followed by ASI_STBI_P (mark as LRU) for the last store. That
* mixed approach reduces the chances the cache line is removed
* before we finish setting it, while minimizing the effects on
* other cached values during a large memcpy
*
* Intermediate stores can be normal since first BIS activates the
* cache line in the L2 cache.
*
* ST_CHUNK batches up initial BIS operations for several cache lines
* to allow multiple requests to not be blocked by overflowing the
* the store miss buffer. Then the matching stores for all those
* BIS operations are executed.
*/
.Lalign_loop:
cmp %o5, ST_CHUNK*64
blu,pt %XCC, .Lalign_short
mov ST_CHUNK, %o3
sllx %o3, 6, %g5 /* ST_CHUNK*64 */
.Lalign_loop_start:
prefetch [%o1 + (ALIGN_PRE * BLOCK_SIZE)], 21
subcc %o3, 2, %o3
ldx [%o1], %o4
add %o1, 128, %o1
EX_ST(STORE_ASI(%o4, %o0))
add %o0, 64, %o0
ldx [%o1-64], %o4
EX_ST(STORE_ASI(%o4, %o0))
add %o0, 64, %o0
bgu,pt %XCC, .Lalign_loop_start
prefetch [%o1 + ((ALIGN_PRE-1) * BLOCK_SIZE)], 21
mov ST_CHUNK, %o3
sub %o1, %g5, %o1 /* reset %o1 */
sub %o0, %g5, %o0 /* reset %o0 */
sub %o0, 8, %o0 /* adjust %o0 for ASI alignment */
.Lalign_loop_rest:
ldx [%o1+8],%o4
add %o0, 64, %o0
stx %o4, [%o0-48]
subcc %o3, 1, %o3
ldx [%o1+16],%o4
stx %o4, [%o0-40]
sub %o5, 64, %o5
ldx [%o1+24],%o4
stx %o4, [%o0-32]
ldx [%o1+32],%o4
stx %o4, [%o0-24]
ldx [%o1+40],%o4
stx %o4, [%o0-16]
ldx [%o1+48],%o4
stx %o4, [%o0-8]
add %o1, 64, %o1
ldx [%o1-8],%o4
bgu,pt %XCC, .Lalign_loop_rest
EX_ST(STORE_INIT(%o4,%o0)) /* mark cache line as LRU */
mov ST_CHUNK, %o3
cmp %o5, ST_CHUNK*64
bgu,pt %XCC, .Lalign_loop_start
add %o0, 8, %o0 /* restore %o0 from ASI alignment */
cmp %o5, 0
beq,pt %XCC, .Lalign_done
/* no prefetches needed in these loops
* since we are within ALIGN_PRE of the end */
.Lalign_short:
srl %o5, 6, %o3
.Lalign_loop_short:
subcc %o3, 1, %o3
ldx [%o1], %o4
add %o1, 64, %o1
EX_ST(STORE_ASI(%o4, %o0))
bgu,pt %XCC, .Lalign_loop_short
add %o0, 64, %o0
sub %o1, %o5, %o1 /* reset %o1 */
sub %o0, %o5, %o0 /* reset %o0 */
sub %o0, 8, %o0 /* adjust %o0 for ASI alignment */
.Lalign_short_rest:
ldx [%o1+8],%o4
add %o0, 64, %o0
stx %o4, [%o0-48]
ldx [%o1+16],%o4
subcc %o5, 64, %o5
stx %o4, [%o0-40]
ldx [%o1+24],%o4
stx %o4, [%o0-32]
ldx [%o1+32],%o4
stx %o4, [%o0-24]
ldx [%o1+40],%o4
stx %o4, [%o0-16]
ldx [%o1+48],%o4
stx %o4, [%o0-8]
add %o1, 64, %o1
ldx [%o1-8],%o4
bgu,pt %XCC, .Lalign_short_rest
EX_ST(STORE_INIT(%o4,%o0)) /* mark cache line as LRU */
add %o0, 8, %o0 /* restore %o0 from ASI alignment */
.Lalign_done:
cmp %o2, 0
membar #StoreStore
bne,pt %XCC, .Lmedl63
subcc %o2, 63, %o2 /* adjust length to allow cc test */
retl
mov EX_RETVAL(%g1), %o0 /* restore %o0 */
.align 16
/* Dst is on 8 byte boundary; src is not; remaining cnt > SMALL_MAX */
/* Since block load/store and BIS are not in use for unaligned data,
* no need to align dst on 64 byte cache line boundary */
.Lunalignsetup:
.Lunalignrejoin:
rd %fprs, %g5 /* check for unused fp */
/* if fprs.fef == 0, set it.
* Setting it when already set costs more than checking */
andcc %g5, FPRS_FEF, %g5 /* test FEF, fprs.du = fprs.dl = 0 */
bz,a %XCC, 1f
wr %g0, FPRS_FEF, %fprs /* fprs.fef = 1 */
1:
andn %o2, 0x3f, %o5 /* %o5 is multiple of block size */
and %o2, 0x3f, %o2 /* residue bytes in %o2 */
cmp %o2, 8 /* Insure we do not load beyond */
bgt,pt %XCC, .Lunalign_adjust /* end of source buffer */
andn %o1, 0x7, %o4 /* %o4 has 8 byte aligned src addr */
add %o2, 64, %o2 /* adjust to leave loop */
sub %o5, 64, %o5 /* early if necessary */
.Lunalign_adjust:
alignaddr %o1, %g0, %g0 /* generate %gsr */
add %o1, %o5, %o1 /* advance %o1 to after blocks */
ldd [%o4], %f0
.Lunalign_loop:
prefetch [%o0 + (9 * BLOCK_SIZE)], 20
ldd [%o4+8], %f2
faligndata %f0, %f2, %f16
ldd [%o4+16], %f4
subcc %o5, BLOCK_SIZE, %o5
std %f16, [%o0]
faligndata %f2, %f4, %f18
ldd [%o4+24], %f6
std %f18, [%o0+8]
faligndata %f4, %f6, %f20
ldd [%o4+32], %f8
std %f20, [%o0+16]
faligndata %f6, %f8, %f22
ldd [%o4+40], %f10
std %f22, [%o0+24]
faligndata %f8, %f10, %f24
ldd [%o4+48], %f12
std %f24, [%o0+32]
faligndata %f10, %f12, %f26
ldd [%o4+56], %f14
add %o4, BLOCK_SIZE, %o4
std %f26, [%o0+40]
faligndata %f12, %f14, %f28
ldd [%o4], %f0
std %f28, [%o0+48]
faligndata %f14, %f0, %f30
std %f30, [%o0+56]
add %o0, BLOCK_SIZE, %o0
bgu,pt %XCC, .Lunalign_loop
prefetch [%o4 + (11 * BLOCK_SIZE)], 20
/* Handle trailing bytes, 64 to 127
* Dest long word aligned, Src not long word aligned */
cmp %o2, 15
bleu,pt %XCC, .Lunalign_short
andn %o2, 0x7, %o5 /* %o5 is multiple of 8 */
and %o2, 0x7, %o2 /* residue bytes in %o2 */
add %o2, 8, %o2
sub %o5, 8, %o5 /* do not load past end of src */
andn %o1, 0x7, %o4 /* %o4 has 8 byte aligned src addr */
add %o1, %o5, %o1 /* move %o1 to after multiple of 8 */
ldd [%o4], %f0 /* fetch partial word */
.Lunalign_by8:
ldd [%o4+8], %f2
add %o4, 8, %o4
faligndata %f0, %f2, %f16
subcc %o5, 8, %o5
std %f16, [%o0]
fsrc2 %f2, %f0
bgu,pt %XCC, .Lunalign_by8
add %o0, 8, %o0
.Lunalign_short: /* restore fprs state */
brnz,pt %g5, .Lsmallrest
nop
ba .Lsmallrest
wr %g5, %g0, %fprs
END(__memcpy_niagara7)
#endif