glibc/sysdeps/generic/termbits.h

203 lines
7.6 KiB
C
Raw Normal View History

1995-02-18 01:27:10 +00:00
/* termios type and macro definitions. 4.4 BSD/generic GNU version.
Copyright (C) 1993, 1994 Free Software Foundation, Inc.
This file is part of the GNU C Library.
The GNU C Library is free software; you can redistribute it and/or
modify it under the terms of the GNU Library General Public License as
published by the Free Software Foundation; either version 2 of the
License, or (at your option) any later version.
The GNU C Library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
Library General Public License for more details.
You should have received a copy of the GNU Library General Public
License along with the GNU C Library; see the file COPYING.LIB. If
not, write to the Free Software Foundation, Inc., 675 Mass Ave,
Cambridge, MA 02139, USA. */
/* These definitions match those used by the 4.4 BSD kernel.
If the operating system has termios system calls or ioctls that
correctly implement the POSIX.1 behavior, there should be a
system-dependent version of this file that defines `struct termios',
`tcflag_t', `cc_t', `speed_t' and the `TC*' constants appropriately. */
/* Type of terminal control flag masks. */
typedef unsigned long int tcflag_t;
/* Type of control characters. */
typedef unsigned char cc_t;
/* Type of baud rate specifiers. */
typedef long int speed_t;
/* Terminal control structure. */
struct termios
{
/* Input modes. */
tcflag_t c_iflag;
#define IGNBRK (1 << 0) /* Ignore break condition. */
#define BRKINT (1 << 1) /* Signal interrupt on break. */
#define IGNPAR (1 << 2) /* Ignore characters with parity errors. */
#define PARMRK (1 << 3) /* Mark parity and framing errors. */
#define INPCK (1 << 4) /* Enable input parity check. */
#define ISTRIP (1 << 5) /* Strip 8th bit off characters. */
#define INLCR (1 << 6) /* Map NL to CR on input. */
#define IGNCR (1 << 7) /* Ignore CR. */
#define ICRNL (1 << 8) /* Map CR to NL on input. */
#define IXON (1 << 9) /* Enable start/stop output control. */
#define IXOFF (1 << 10) /* Enable start/stop input control. */
#ifdef __USE_BSD
#define IXANY (1 << 11) /* Any character will restart after stop. */
#define IMAXBEL (1 << 13) /* Ring bell when input queue is full. */
#endif
/* Output modes. */
tcflag_t c_oflag;
#define OPOST (1 << 0) /* Perform output processing. */
#ifdef __USE_BSD
#define ONLCR (1 << 1) /* Map NL to CR-NL on output. */
#define OXTABS (1 << 2) /* Expand tabs to spaces. */
#define ONOEOT (1 << 8) /* Discard EOT (^D) on output. */
#endif
/* Control modes. */
tcflag_t c_cflag;
#ifdef __USE_BSD
#define CIGNORE (1 << 0) /* Ignore these control flags. */
#endif
#define CSIZE (CS5|CS6|CS7|CS8) /* Number of bits per byte (mask). */
#define CS5 0 /* 5 bits per byte. */
#define CS6 (1 << 8) /* 6 bits per byte. */
#define CS7 (1 << 9) /* 7 bits per byte. */
#define CS8 (CS6|CS7) /* 8 bits per byte. */
#define CSTOPB (1 << 10) /* Two stop bits instead of one. */
#define CREAD (1 << 11) /* Enable receiver. */
#define PARENB (1 << 12) /* Parity enable. */
#define PARODD (1 << 13) /* Odd parity instead of even. */
#define HUPCL (1 << 14) /* Hang up on last close. */
#define CLOCAL (1 << 15) /* Ignore modem status lines. */
#ifdef __USE_BSD
#define CCTS_OFLOW (1 << 16) /* CTS flow control of output. */
#define CRTS_IFLOW (1 << 17) /* RTS flow control of input. */
#define MDMBUF (1 << 20) /* Carrier flow control of output. */
#endif
/* Local modes. */
tcflag_t c_lflag;
#ifdef __USE_BSD
#define ECHOKE (1 << 0) /* Visual erase for KILL. */
#endif
#define _ECHOE (1 << 1) /* Visual erase for ERASE. */
#define ECHOE _ECHOE
#define _ECHOK (1 << 2) /* Echo NL after KILL. */
#define ECHOK _ECHOK
#define _ECHO (1 << 3) /* Enable echo. */
#define ECHO _ECHO
#define _ECHONL (1 << 4) /* Echo NL even if ECHO is off. */
#define ECHONL _ECHONL
#ifdef __USE_BSD
#define ECHOPRT (1 << 5) /* Hardcopy visual erase. */
#define ECHOCTL (1 << 6) /* Echo control characters as ^X. */
#endif
#define _ISIG (1 << 7) /* Enable signals. */
#define ISIG _ISIG
#define _ICANON (1 << 8) /* Do erase and kill processing. */
#define ICANON _ICANON
#ifdef __USE_BSD
#define ALTWERASE (1 << 9) /* Alternate WERASE algorithm. */
#endif
#define _IEXTEN (1 << 10) /* Enable DISCARD and LNEXT. */
#define IEXTEN _IEXTEN
#define EXTPROC (1 << 11) /* External processing. */
#define _TOSTOP (1 << 22) /* Send SIGTTOU for background output. */
#define TOSTOP _TOSTOP
#ifdef __USE_BSD
#define FLUSHO (1 << 23) /* Output being flushed (state). */
#define NOKERNINFO (1 << 25) /* Disable VSTATUS. */
#define PENDIN (1 << 29) /* Retype pending input (state). */
#endif
#define _NOFLSH (1 << 31) /* Disable flush after interrupt. */
#define NOFLSH _NOFLSH
/* Control characters. */
#define VEOF 0 /* End-of-file character [ICANON]. */
#define VEOL 1 /* End-of-line character [ICANON]. */
#ifdef __USE_BSD
#define VEOL2 2 /* Second EOL character [ICANON]. */
#endif
#define VERASE 3 /* Erase character [ICANON]. */
#ifdef __USE_BSD
#define VWERASE 4 /* Word-erase character [ICANON]. */
#endif
#define VKILL 5 /* Kill-line character [ICANON]. */
#ifdef __USE_BSD
#define VREPRINT 6 /* Reprint-line character [ICANON]. */
#endif
#define VINTR 8 /* Interrupt character [ISIG]. */
#define VQUIT 9 /* Quit character [ISIG]. */
#define VSUSP 10 /* Suspend character [ISIG]. */
#ifdef __USE_BSD
#define VDSUSP 11 /* Delayed suspend character [ISIG]. */
#endif
#define VSTART 12 /* Start (X-ON) character [IXON, IXOFF]. */
#define VSTOP 13 /* Stop (X-OFF) character [IXON, IXOFF]. */
#ifdef __USE_BSD
#define VLNEXT 14 /* Literal-next character [IEXTEN]. */
#define VDISCARD 15 /* Discard character [IEXTEN]. */
#endif
#define VMIN 16 /* Minimum number of bytes read at once [!ICANON]. */
#define VTIME 17 /* Time-out value (tenths of a second) [!ICANON]. */
#ifdef __USE_BSD
#define VSTATUS 18 /* Status character [ICANON]. */
#endif
#define NCCS 20 /* Value duplicated in <hurd/tioctl.defs>. */
cc_t c_cc[NCCS];
/* Input and output baud rates. */
speed_t __ispeed, __ospeed;
#define B0 0 /* Hang up. */
#define B50 50 /* 50 baud. */
#define B75 75 /* 75 baud. */
#define B110 110 /* 110 baud. */
#define B134 134 /* 134.5 baud. */
#define B150 150 /* 150 baud. */
#define B200 200 /* 200 baud. */
#define B300 300 /* 300 baud. */
#define B600 600 /* 600 baud. */
#define B1200 1200 /* 1200 baud. */
#define B1800 1800 /* 1800 baud. */
#define B2400 2400 /* 2400 baud. */
#define B4800 4800 /* 4800 baud. */
#define B9600 9600 /* 9600 baud. */
#define B19200 19200 /* 19200 baud. */
#define B38400 38400 /* 38400 baud. */
#ifdef __USE_BSD
#define EXTA 19200
#define EXTB 38400
#endif
};
#define _IOT_termios /* Hurd ioctl type field. */ \
_IOT (_IOTS (tcflag_t), 4, _IOTS (cc_t), NCCS, _IOTS (speed_t), 2)
/* Values for the OPTIONAL_ACTIONS argument to `tcsetattr'. */
#define TCSANOW 0 /* Change immediately. */
#define TCSADRAIN 1 /* Change when pending output is written. */
#define TCSAFLUSH 2 /* Flush pending input before changing. */
#ifdef __USE_BSD
#define TCSASOFT 0x10 /* Flag: Don't alter hardware state. */
#endif
/* Values for the QUEUE_SELECTOR argument to `tcflush'. */
#define TCIFLUSH 1 /* Discard data received but not yet read. */
#define TCOFLUSH 2 /* Discard data written but not yet sent. */
#define TCIOFLUSH 3 /* Discard all pending data. */
/* Values for the ACTION argument to `tcflow'. */
#define TCOOFF 1 /* Suspend output. */
#define TCOON 2 /* Restart suspended output. */
#define TCIOFF 3 /* Send a STOP character. */
#define TCION 4 /* Send a START character. */