[BZ 1190] Make EOF sticky in stdio.
C99 specifies that the EOF condition on a file is "sticky": once EOF
has been encountered, all subsequent reads should continue to return
EOF until the file is closed or something clears the "end-of-file
indicator" (e.g. fseek, clearerr). This is arguably a change from
C89, where the wording was ambiguous; the BSDs always had sticky EOF,
but the System V lineage would attempt to read from the underlying fd
again. GNU libc has followed System V for as long as we've been
using libio, but nowadays C99 conformance and BSD compatibility are
more important than System V compatibility.
You might wonder if changing the _underflow impls is sufficient to
apply the C99 semantics to all of the many stdio functions that
perform input. It should be enough to cover all paths to _IO_SYSREAD,
and the only other functions that call _IO_SYSREAD are the _seekoff
impls, which is OK because seeking clears EOF, and the _xsgetn impls,
which, as far as I can tell, are unused within glibc.
The test programs in this patch use a pseudoterminal to set up the
necessary conditions. To facilitate this I added a new test-support
function that sets up a pair of pty file descriptors for you; it's
almost the same as BSD openpty, the only differences are that it
allocates the optionally-returned tty pathname with malloc, and that
it crashes if anything goes wrong.
[BZ #1190]
[BZ #19476]
* libio/fileops.c (_IO_new_file_underflow): Return EOF immediately
if the _IO_EOF_SEEN bit is already set; update commentary.
* libio/oldfileops.c (_IO_old_file_underflow): Likewise.
* libio/wfileops.c (_IO_wfile_underflow): Likewise.
* support/support_openpty.c, support/tty.h: New files.
* support/Makefile (libsupport-routines): Add support_openpty.
* libio/tst-fgetc-after-eof.c, wcsmbs/test-fgetwc-after-eof.c:
New test cases.
* libio/Makefile (tests): Add tst-fgetc-after-eof.
* wcsmbs/Makefile (tests): Add tst-fgetwc-after-eof.
2018-02-22 00:12:51 +00:00
|
|
|
/* Open a pseudoterminal.
|
2023-01-06 21:08:04 +00:00
|
|
|
Copyright (C) 2018-2023 Free Software Foundation, Inc.
|
[BZ 1190] Make EOF sticky in stdio.
C99 specifies that the EOF condition on a file is "sticky": once EOF
has been encountered, all subsequent reads should continue to return
EOF until the file is closed or something clears the "end-of-file
indicator" (e.g. fseek, clearerr). This is arguably a change from
C89, where the wording was ambiguous; the BSDs always had sticky EOF,
but the System V lineage would attempt to read from the underlying fd
again. GNU libc has followed System V for as long as we've been
using libio, but nowadays C99 conformance and BSD compatibility are
more important than System V compatibility.
You might wonder if changing the _underflow impls is sufficient to
apply the C99 semantics to all of the many stdio functions that
perform input. It should be enough to cover all paths to _IO_SYSREAD,
and the only other functions that call _IO_SYSREAD are the _seekoff
impls, which is OK because seeking clears EOF, and the _xsgetn impls,
which, as far as I can tell, are unused within glibc.
The test programs in this patch use a pseudoterminal to set up the
necessary conditions. To facilitate this I added a new test-support
function that sets up a pair of pty file descriptors for you; it's
almost the same as BSD openpty, the only differences are that it
allocates the optionally-returned tty pathname with malloc, and that
it crashes if anything goes wrong.
[BZ #1190]
[BZ #19476]
* libio/fileops.c (_IO_new_file_underflow): Return EOF immediately
if the _IO_EOF_SEEN bit is already set; update commentary.
* libio/oldfileops.c (_IO_old_file_underflow): Likewise.
* libio/wfileops.c (_IO_wfile_underflow): Likewise.
* support/support_openpty.c, support/tty.h: New files.
* support/Makefile (libsupport-routines): Add support_openpty.
* libio/tst-fgetc-after-eof.c, wcsmbs/test-fgetwc-after-eof.c:
New test cases.
* libio/Makefile (tests): Add tst-fgetc-after-eof.
* wcsmbs/Makefile (tests): Add tst-fgetwc-after-eof.
2018-02-22 00:12:51 +00:00
|
|
|
This file is part of the GNU C Library.
|
|
|
|
|
|
|
|
The GNU C Library is free software; you can redistribute it and/or
|
|
|
|
modify it under the terms of the GNU Lesser General Public
|
|
|
|
License as published by the Free Software Foundation; either
|
|
|
|
version 2.1 of the License, or (at your option) any later version.
|
|
|
|
|
|
|
|
The GNU C Library is distributed in the hope that it will be useful,
|
|
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
|
|
Lesser General Public License for more details.
|
|
|
|
|
|
|
|
You should have received a copy of the GNU Lesser General Public
|
|
|
|
License along with the GNU C Library; if not, see
|
Prefer https to http for gnu.org and fsf.org URLs
Also, change sources.redhat.com to sourceware.org.
This patch was automatically generated by running the following shell
script, which uses GNU sed, and which avoids modifying files imported
from upstream:
sed -ri '
s,(http|ftp)(://(.*\.)?(gnu|fsf|sourceware)\.org($|[^.]|\.[^a-z])),https\2,g
s,(http|ftp)(://(.*\.)?)sources\.redhat\.com($|[^.]|\.[^a-z]),https\2sourceware.org\4,g
' \
$(find $(git ls-files) -prune -type f \
! -name '*.po' \
! -name 'ChangeLog*' \
! -path COPYING ! -path COPYING.LIB \
! -path manual/fdl-1.3.texi ! -path manual/lgpl-2.1.texi \
! -path manual/texinfo.tex ! -path scripts/config.guess \
! -path scripts/config.sub ! -path scripts/install-sh \
! -path scripts/mkinstalldirs ! -path scripts/move-if-change \
! -path INSTALL ! -path locale/programs/charmap-kw.h \
! -path po/libc.pot ! -path sysdeps/gnu/errlist.c \
! '(' -name configure \
-execdir test -f configure.ac -o -f configure.in ';' ')' \
! '(' -name preconfigure \
-execdir test -f preconfigure.ac ';' ')' \
-print)
and then by running 'make dist-prepare' to regenerate files built
from the altered files, and then executing the following to cleanup:
chmod a+x sysdeps/unix/sysv/linux/riscv/configure
# Omit irrelevant whitespace and comment-only changes,
# perhaps from a slightly-different Autoconf version.
git checkout -f \
sysdeps/csky/configure \
sysdeps/hppa/configure \
sysdeps/riscv/configure \
sysdeps/unix/sysv/linux/csky/configure
# Omit changes that caused a pre-commit check to fail like this:
# remote: *** error: sysdeps/powerpc/powerpc64/ppc-mcount.S: trailing lines
git checkout -f \
sysdeps/powerpc/powerpc64/ppc-mcount.S \
sysdeps/unix/sysv/linux/s390/s390-64/syscall.S
# Omit change that caused a pre-commit check to fail like this:
# remote: *** error: sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S: last line does not end in newline
git checkout -f sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S
2019-09-07 05:40:42 +00:00
|
|
|
<https://www.gnu.org/licenses/>. */
|
[BZ 1190] Make EOF sticky in stdio.
C99 specifies that the EOF condition on a file is "sticky": once EOF
has been encountered, all subsequent reads should continue to return
EOF until the file is closed or something clears the "end-of-file
indicator" (e.g. fseek, clearerr). This is arguably a change from
C89, where the wording was ambiguous; the BSDs always had sticky EOF,
but the System V lineage would attempt to read from the underlying fd
again. GNU libc has followed System V for as long as we've been
using libio, but nowadays C99 conformance and BSD compatibility are
more important than System V compatibility.
You might wonder if changing the _underflow impls is sufficient to
apply the C99 semantics to all of the many stdio functions that
perform input. It should be enough to cover all paths to _IO_SYSREAD,
and the only other functions that call _IO_SYSREAD are the _seekoff
impls, which is OK because seeking clears EOF, and the _xsgetn impls,
which, as far as I can tell, are unused within glibc.
The test programs in this patch use a pseudoterminal to set up the
necessary conditions. To facilitate this I added a new test-support
function that sets up a pair of pty file descriptors for you; it's
almost the same as BSD openpty, the only differences are that it
allocates the optionally-returned tty pathname with malloc, and that
it crashes if anything goes wrong.
[BZ #1190]
[BZ #19476]
* libio/fileops.c (_IO_new_file_underflow): Return EOF immediately
if the _IO_EOF_SEEN bit is already set; update commentary.
* libio/oldfileops.c (_IO_old_file_underflow): Likewise.
* libio/wfileops.c (_IO_wfile_underflow): Likewise.
* support/support_openpty.c, support/tty.h: New files.
* support/Makefile (libsupport-routines): Add support_openpty.
* libio/tst-fgetc-after-eof.c, wcsmbs/test-fgetwc-after-eof.c:
New test cases.
* libio/Makefile (tests): Add tst-fgetc-after-eof.
* wcsmbs/Makefile (tests): Add tst-fgetwc-after-eof.
2018-02-22 00:12:51 +00:00
|
|
|
|
|
|
|
#include <support/tty.h>
|
|
|
|
#include <support/check.h>
|
|
|
|
#include <support/support.h>
|
|
|
|
|
|
|
|
#include <errno.h>
|
|
|
|
#include <stdlib.h>
|
|
|
|
#include <string.h>
|
|
|
|
|
|
|
|
#include <fcntl.h>
|
|
|
|
#include <termios.h>
|
|
|
|
#include <sys/ioctl.h>
|
|
|
|
#include <unistd.h>
|
|
|
|
|
|
|
|
/* As ptsname, but allocates space for an appropriately-sized string
|
|
|
|
using malloc. */
|
|
|
|
static char *
|
|
|
|
xptsname (int fd)
|
|
|
|
{
|
|
|
|
int rv;
|
|
|
|
size_t buf_len = 128;
|
|
|
|
char *buf = xmalloc (buf_len);
|
|
|
|
for (;;)
|
|
|
|
{
|
|
|
|
rv = ptsname_r (fd, buf, buf_len);
|
|
|
|
if (rv)
|
|
|
|
FAIL_EXIT1 ("ptsname_r: %s", strerror (errno));
|
|
|
|
|
|
|
|
if (memchr (buf, '\0', buf_len))
|
|
|
|
return buf; /* ptsname succeeded and the buffer was not truncated */
|
|
|
|
|
|
|
|
buf_len *= 2;
|
|
|
|
buf = xrealloc (buf, buf_len);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
void
|
|
|
|
support_openpty (int *a_outer, int *a_inner, char **a_name,
|
|
|
|
const struct termios *termp,
|
|
|
|
const struct winsize *winp)
|
|
|
|
{
|
|
|
|
int outer = -1, inner = -1;
|
|
|
|
char *namebuf = 0;
|
|
|
|
|
|
|
|
outer = posix_openpt (O_RDWR | O_NOCTTY);
|
|
|
|
if (outer == -1)
|
|
|
|
FAIL_EXIT1 ("posix_openpt: %s", strerror (errno));
|
|
|
|
|
|
|
|
if (grantpt (outer))
|
|
|
|
FAIL_EXIT1 ("grantpt: %s", strerror (errno));
|
|
|
|
|
|
|
|
if (unlockpt (outer))
|
|
|
|
FAIL_EXIT1 ("unlockpt: %s", strerror (errno));
|
|
|
|
|
|
|
|
|
|
|
|
#ifdef TIOCGPTPEER
|
|
|
|
inner = ioctl (outer, TIOCGPTPEER, O_RDWR | O_NOCTTY);
|
|
|
|
#endif
|
|
|
|
if (inner == -1)
|
|
|
|
{
|
|
|
|
/* The kernel might not support TIOCGPTPEER, fall back to open
|
|
|
|
by name. */
|
|
|
|
namebuf = xptsname (outer);
|
|
|
|
inner = open (namebuf, O_RDWR | O_NOCTTY);
|
|
|
|
if (inner == -1)
|
|
|
|
FAIL_EXIT1 ("%s: %s", namebuf, strerror (errno));
|
|
|
|
}
|
|
|
|
|
|
|
|
if (termp)
|
|
|
|
{
|
|
|
|
if (tcsetattr (inner, TCSAFLUSH, termp))
|
|
|
|
FAIL_EXIT1 ("tcsetattr: %s", strerror (errno));
|
|
|
|
}
|
|
|
|
#ifdef TIOCSWINSZ
|
|
|
|
if (winp)
|
|
|
|
{
|
|
|
|
if (ioctl (inner, TIOCSWINSZ, winp))
|
|
|
|
FAIL_EXIT1 ("TIOCSWINSZ: %s", strerror (errno));
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
|
|
|
|
if (a_name)
|
|
|
|
{
|
|
|
|
if (!namebuf)
|
|
|
|
namebuf = xptsname (outer);
|
|
|
|
*a_name = namebuf;
|
|
|
|
}
|
|
|
|
else
|
|
|
|
free (namebuf);
|
|
|
|
*a_outer = outer;
|
|
|
|
*a_inner = inner;
|
|
|
|
}
|