Consolidate Linux setrlimit and getrlimit implementation
This patch consolidates all Linux setrlimit and getrlimit on the default
sysdeps/unix/sysv/linux/{set,get}rlimit{64}.c. It contains two exceptions:
1. mips32 and mips64n32 which requires a versioned symbol for GLIBC 2.19
and higher due a broken RLIM64_INFINITY constant.
2. sparc32 does not define a compat symbol for getrlimit64 for old 2GB
limit. I am not sure if it is required, but a RLIM_INFINITY fix [1]
change its definition without adding a compat symbol. This patch does
not aim to address this possible issue, it follow current symbol
export.
The default implementation uses prlimit64 for 64 bit rlim_t ({set,get}rlimit64)
and if it fails with ENOSYS it fall back to {get,set}rlimit syscall. This
code path is only used on kernel older than 2.6.36 (basically now only x86)
and I avoid to user __ASSUME_PRLIMTI64 to simplify the implementation. Once
x86 moves to be on par with other architectures regarding minimum kernel
supported we can get rid of using old syscalls and default path.
A new type size define is added, __RLIM_T_MATCHES_RLIM64_T, where is set as
default for 64 bits ports. This allows the default implementation to avoid
{get,set}rlimit building and alias {get,set}rlimit64 to {get,set}rlimit.
Checked on x86_64, i386, armhf, aarch64, and powerpc64le. I also did a
sanity build plus check-abi on all other supported architectures.
[1] Commit 9c96ff23858b0759e12ad69e3c4599931c90bee8
Adhemerval Zanella <adhemerval.zanella@linaro.org>
Yury Norov <ynorov@caviumnetworks.com>
* bits/typesizes.h (__RLIM_T_MATCHES_RLIM64_T): define.
* sysdeps/unix/sysv/linux/alpha/bits/typesizes.h
(__RLIM_T_MATCHES_RLIM64_T): Likewise.
* sysdeps/unix/sysv/linux/generic/bits/typesizes.h
(__RLIM_T_MATCHES_RLIM64_T): Likewise.
* sysdeps/unix/sysv/linux/s390/bits/typesizes.h [__s390x__]
(__RLIM_T_MATCHES_RLIM64_T): Likewise.
* sysdeps/unix/sysv/linux/sparc/bits/typesizes.h
[__arch64__ || __sparcv9] (__RLIM_T_MATCHES_RLIM64_T): Likewise.
* sysdeps/unix/sysv/linux/x86/bits/typesizes.h [__86_64__]
(__RLIM_T_MATCHES_RLIM64_T): Likewise.
* sysdeps/unix/sysv/linux/arm/Makefile [$(subdir) = resource]
(sysdep_routines): Remove oldgetrlimit64.
* sysdeps/unix/sysv/linux/i386/Makefile [$(subdir) = resource]
(sysdep_routines): Likewise.
* sysdeps/unix/sysv/linux/m68k/Makefile [$(subdir) = resource]
(sysdep_routines): Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/Makefile
[$(subdir) = resource] (sysdep_routines): Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/Makefile
[$(subdir) = resource] (sysdep_routines): Likewise.
* sysdeps/unix/sysv/linux/arm/getrlimit64.c: Remove file.
* sysdeps/unix/sysv/linux/arm/oldgetrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/hppa/getrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/i386/getrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/i386/oldgetrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/m68k/getrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/m68k/oldgetrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/powerpc/getrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/powerpc/oldgetrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/getrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/oldgetrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/sh/getrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/wordsize-64/getrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/wordsize-64/setrlimit64.c: Likewise.
* sysdeps/sysv/linux/generic/wordsize-32/syscalls.list: Remove
setrlimit and getrlimit.
* sysdeps/unix/sysv/linux/hppa/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/i386/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/wordsize-64/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/getrlimit.c: New file.
* sysdeps/unix/sysv/linux/sparc/getrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/setrlimit.c: Likewise.
* sysdeps/unix/sysv/linux/getrlimit64.c (__getrlimit64): Handle
__RLIM_T_MATCHES_RLIM64_T and add alias if defined.
(__old_getrlimit64): Add compatibility symbol.
* sysdeps/unix/sysv/linux/setrlimit64.c (__setrlimit): Likewise.
2016-10-18 11:41:56 +00:00
|
|
|
/* Linux setrlimit64 implementation (64 bits off_t).
|
2023-01-06 21:08:04 +00:00
|
|
|
Copyright (C) 2010-2023 Free Software Foundation, Inc.
|
2010-12-26 01:12:27 +00:00
|
|
|
This file is part of the GNU C Library.
|
|
|
|
|
|
|
|
The GNU C Library is free software; you can redistribute it and/or
|
|
|
|
modify it under the terms of the GNU Lesser General Public
|
|
|
|
License as published by the Free Software Foundation; either
|
|
|
|
version 2.1 of the License, or (at your option) any later version.
|
|
|
|
|
|
|
|
The GNU C Library is distributed in the hope that it will be useful,
|
|
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
|
|
Lesser General Public License for more details.
|
|
|
|
|
|
|
|
You should have received a copy of the GNU Lesser General Public
|
2012-02-09 23:18:22 +00:00
|
|
|
License along with the GNU C Library; if not, see
|
Prefer https to http for gnu.org and fsf.org URLs
Also, change sources.redhat.com to sourceware.org.
This patch was automatically generated by running the following shell
script, which uses GNU sed, and which avoids modifying files imported
from upstream:
sed -ri '
s,(http|ftp)(://(.*\.)?(gnu|fsf|sourceware)\.org($|[^.]|\.[^a-z])),https\2,g
s,(http|ftp)(://(.*\.)?)sources\.redhat\.com($|[^.]|\.[^a-z]),https\2sourceware.org\4,g
' \
$(find $(git ls-files) -prune -type f \
! -name '*.po' \
! -name 'ChangeLog*' \
! -path COPYING ! -path COPYING.LIB \
! -path manual/fdl-1.3.texi ! -path manual/lgpl-2.1.texi \
! -path manual/texinfo.tex ! -path scripts/config.guess \
! -path scripts/config.sub ! -path scripts/install-sh \
! -path scripts/mkinstalldirs ! -path scripts/move-if-change \
! -path INSTALL ! -path locale/programs/charmap-kw.h \
! -path po/libc.pot ! -path sysdeps/gnu/errlist.c \
! '(' -name configure \
-execdir test -f configure.ac -o -f configure.in ';' ')' \
! '(' -name preconfigure \
-execdir test -f preconfigure.ac ';' ')' \
-print)
and then by running 'make dist-prepare' to regenerate files built
from the altered files, and then executing the following to cleanup:
chmod a+x sysdeps/unix/sysv/linux/riscv/configure
# Omit irrelevant whitespace and comment-only changes,
# perhaps from a slightly-different Autoconf version.
git checkout -f \
sysdeps/csky/configure \
sysdeps/hppa/configure \
sysdeps/riscv/configure \
sysdeps/unix/sysv/linux/csky/configure
# Omit changes that caused a pre-commit check to fail like this:
# remote: *** error: sysdeps/powerpc/powerpc64/ppc-mcount.S: trailing lines
git checkout -f \
sysdeps/powerpc/powerpc64/ppc-mcount.S \
sysdeps/unix/sysv/linux/s390/s390-64/syscall.S
# Omit change that caused a pre-commit check to fail like this:
# remote: *** error: sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S: last line does not end in newline
git checkout -f sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S
2019-09-07 05:40:42 +00:00
|
|
|
<https://www.gnu.org/licenses/>. */
|
2010-12-26 01:12:27 +00:00
|
|
|
|
|
|
|
#include <errno.h>
|
|
|
|
#include <sys/types.h>
|
2020-02-04 13:29:04 +00:00
|
|
|
#include <sysdep.h>
|
Consolidate Linux setrlimit and getrlimit implementation
This patch consolidates all Linux setrlimit and getrlimit on the default
sysdeps/unix/sysv/linux/{set,get}rlimit{64}.c. It contains two exceptions:
1. mips32 and mips64n32 which requires a versioned symbol for GLIBC 2.19
and higher due a broken RLIM64_INFINITY constant.
2. sparc32 does not define a compat symbol for getrlimit64 for old 2GB
limit. I am not sure if it is required, but a RLIM_INFINITY fix [1]
change its definition without adding a compat symbol. This patch does
not aim to address this possible issue, it follow current symbol
export.
The default implementation uses prlimit64 for 64 bit rlim_t ({set,get}rlimit64)
and if it fails with ENOSYS it fall back to {get,set}rlimit syscall. This
code path is only used on kernel older than 2.6.36 (basically now only x86)
and I avoid to user __ASSUME_PRLIMTI64 to simplify the implementation. Once
x86 moves to be on par with other architectures regarding minimum kernel
supported we can get rid of using old syscalls and default path.
A new type size define is added, __RLIM_T_MATCHES_RLIM64_T, where is set as
default for 64 bits ports. This allows the default implementation to avoid
{get,set}rlimit building and alias {get,set}rlimit64 to {get,set}rlimit.
Checked on x86_64, i386, armhf, aarch64, and powerpc64le. I also did a
sanity build plus check-abi on all other supported architectures.
[1] Commit 9c96ff23858b0759e12ad69e3c4599931c90bee8
Adhemerval Zanella <adhemerval.zanella@linaro.org>
Yury Norov <ynorov@caviumnetworks.com>
* bits/typesizes.h (__RLIM_T_MATCHES_RLIM64_T): define.
* sysdeps/unix/sysv/linux/alpha/bits/typesizes.h
(__RLIM_T_MATCHES_RLIM64_T): Likewise.
* sysdeps/unix/sysv/linux/generic/bits/typesizes.h
(__RLIM_T_MATCHES_RLIM64_T): Likewise.
* sysdeps/unix/sysv/linux/s390/bits/typesizes.h [__s390x__]
(__RLIM_T_MATCHES_RLIM64_T): Likewise.
* sysdeps/unix/sysv/linux/sparc/bits/typesizes.h
[__arch64__ || __sparcv9] (__RLIM_T_MATCHES_RLIM64_T): Likewise.
* sysdeps/unix/sysv/linux/x86/bits/typesizes.h [__86_64__]
(__RLIM_T_MATCHES_RLIM64_T): Likewise.
* sysdeps/unix/sysv/linux/arm/Makefile [$(subdir) = resource]
(sysdep_routines): Remove oldgetrlimit64.
* sysdeps/unix/sysv/linux/i386/Makefile [$(subdir) = resource]
(sysdep_routines): Likewise.
* sysdeps/unix/sysv/linux/m68k/Makefile [$(subdir) = resource]
(sysdep_routines): Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/Makefile
[$(subdir) = resource] (sysdep_routines): Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/Makefile
[$(subdir) = resource] (sysdep_routines): Likewise.
* sysdeps/unix/sysv/linux/arm/getrlimit64.c: Remove file.
* sysdeps/unix/sysv/linux/arm/oldgetrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/hppa/getrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/i386/getrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/i386/oldgetrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/m68k/getrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/m68k/oldgetrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/powerpc/getrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/powerpc/oldgetrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/getrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/oldgetrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/sh/getrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/wordsize-64/getrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/wordsize-64/setrlimit64.c: Likewise.
* sysdeps/sysv/linux/generic/wordsize-32/syscalls.list: Remove
setrlimit and getrlimit.
* sysdeps/unix/sysv/linux/hppa/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/i386/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/wordsize-64/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/getrlimit.c: New file.
* sysdeps/unix/sysv/linux/sparc/getrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/setrlimit.c: Likewise.
* sysdeps/unix/sysv/linux/getrlimit64.c (__getrlimit64): Handle
__RLIM_T_MATCHES_RLIM64_T and add alias if defined.
(__old_getrlimit64): Add compatibility symbol.
* sysdeps/unix/sysv/linux/setrlimit64.c (__setrlimit): Likewise.
2016-10-18 11:41:56 +00:00
|
|
|
#include <shlib-compat.h>
|
|
|
|
|
|
|
|
/* Add this redirection so the strong_alias for __RLIM_T_MATCHES_RLIM64_T
|
2018-01-02 20:05:29 +00:00
|
|
|
linking setrlimit64 to {__}setrlimit does not throw a type error. */
|
|
|
|
#undef setrlimit
|
|
|
|
#undef __setrlimit
|
Consolidate Linux setrlimit and getrlimit implementation
This patch consolidates all Linux setrlimit and getrlimit on the default
sysdeps/unix/sysv/linux/{set,get}rlimit{64}.c. It contains two exceptions:
1. mips32 and mips64n32 which requires a versioned symbol for GLIBC 2.19
and higher due a broken RLIM64_INFINITY constant.
2. sparc32 does not define a compat symbol for getrlimit64 for old 2GB
limit. I am not sure if it is required, but a RLIM_INFINITY fix [1]
change its definition without adding a compat symbol. This patch does
not aim to address this possible issue, it follow current symbol
export.
The default implementation uses prlimit64 for 64 bit rlim_t ({set,get}rlimit64)
and if it fails with ENOSYS it fall back to {get,set}rlimit syscall. This
code path is only used on kernel older than 2.6.36 (basically now only x86)
and I avoid to user __ASSUME_PRLIMTI64 to simplify the implementation. Once
x86 moves to be on par with other architectures regarding minimum kernel
supported we can get rid of using old syscalls and default path.
A new type size define is added, __RLIM_T_MATCHES_RLIM64_T, where is set as
default for 64 bits ports. This allows the default implementation to avoid
{get,set}rlimit building and alias {get,set}rlimit64 to {get,set}rlimit.
Checked on x86_64, i386, armhf, aarch64, and powerpc64le. I also did a
sanity build plus check-abi on all other supported architectures.
[1] Commit 9c96ff23858b0759e12ad69e3c4599931c90bee8
Adhemerval Zanella <adhemerval.zanella@linaro.org>
Yury Norov <ynorov@caviumnetworks.com>
* bits/typesizes.h (__RLIM_T_MATCHES_RLIM64_T): define.
* sysdeps/unix/sysv/linux/alpha/bits/typesizes.h
(__RLIM_T_MATCHES_RLIM64_T): Likewise.
* sysdeps/unix/sysv/linux/generic/bits/typesizes.h
(__RLIM_T_MATCHES_RLIM64_T): Likewise.
* sysdeps/unix/sysv/linux/s390/bits/typesizes.h [__s390x__]
(__RLIM_T_MATCHES_RLIM64_T): Likewise.
* sysdeps/unix/sysv/linux/sparc/bits/typesizes.h
[__arch64__ || __sparcv9] (__RLIM_T_MATCHES_RLIM64_T): Likewise.
* sysdeps/unix/sysv/linux/x86/bits/typesizes.h [__86_64__]
(__RLIM_T_MATCHES_RLIM64_T): Likewise.
* sysdeps/unix/sysv/linux/arm/Makefile [$(subdir) = resource]
(sysdep_routines): Remove oldgetrlimit64.
* sysdeps/unix/sysv/linux/i386/Makefile [$(subdir) = resource]
(sysdep_routines): Likewise.
* sysdeps/unix/sysv/linux/m68k/Makefile [$(subdir) = resource]
(sysdep_routines): Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/Makefile
[$(subdir) = resource] (sysdep_routines): Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/Makefile
[$(subdir) = resource] (sysdep_routines): Likewise.
* sysdeps/unix/sysv/linux/arm/getrlimit64.c: Remove file.
* sysdeps/unix/sysv/linux/arm/oldgetrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/hppa/getrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/i386/getrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/i386/oldgetrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/m68k/getrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/m68k/oldgetrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/powerpc/getrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/powerpc/oldgetrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/getrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/oldgetrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/sh/getrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/wordsize-64/getrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/wordsize-64/setrlimit64.c: Likewise.
* sysdeps/sysv/linux/generic/wordsize-32/syscalls.list: Remove
setrlimit and getrlimit.
* sysdeps/unix/sysv/linux/hppa/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/i386/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/wordsize-64/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/getrlimit.c: New file.
* sysdeps/unix/sysv/linux/sparc/getrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/setrlimit.c: Likewise.
* sysdeps/unix/sysv/linux/getrlimit64.c (__getrlimit64): Handle
__RLIM_T_MATCHES_RLIM64_T and add alias if defined.
(__old_getrlimit64): Add compatibility symbol.
* sysdeps/unix/sysv/linux/setrlimit64.c (__setrlimit): Likewise.
2016-10-18 11:41:56 +00:00
|
|
|
#define setrlimit setrlimit_redirect
|
|
|
|
#define __setrlimit __setrlimit_redirect
|
|
|
|
#include <sys/resource.h>
|
|
|
|
#undef setrlimit
|
|
|
|
#undef __setrlimit
|
2010-12-26 01:12:27 +00:00
|
|
|
|
|
|
|
/* Set the soft and hard limits for RESOURCE to *RLIMITS.
|
|
|
|
Only the super-user can increase hard limits.
|
|
|
|
Return 0 if successful, -1 if not (and sets errno). */
|
|
|
|
int
|
Consolidate Linux setrlimit and getrlimit implementation
This patch consolidates all Linux setrlimit and getrlimit on the default
sysdeps/unix/sysv/linux/{set,get}rlimit{64}.c. It contains two exceptions:
1. mips32 and mips64n32 which requires a versioned symbol for GLIBC 2.19
and higher due a broken RLIM64_INFINITY constant.
2. sparc32 does not define a compat symbol for getrlimit64 for old 2GB
limit. I am not sure if it is required, but a RLIM_INFINITY fix [1]
change its definition without adding a compat symbol. This patch does
not aim to address this possible issue, it follow current symbol
export.
The default implementation uses prlimit64 for 64 bit rlim_t ({set,get}rlimit64)
and if it fails with ENOSYS it fall back to {get,set}rlimit syscall. This
code path is only used on kernel older than 2.6.36 (basically now only x86)
and I avoid to user __ASSUME_PRLIMTI64 to simplify the implementation. Once
x86 moves to be on par with other architectures regarding minimum kernel
supported we can get rid of using old syscalls and default path.
A new type size define is added, __RLIM_T_MATCHES_RLIM64_T, where is set as
default for 64 bits ports. This allows the default implementation to avoid
{get,set}rlimit building and alias {get,set}rlimit64 to {get,set}rlimit.
Checked on x86_64, i386, armhf, aarch64, and powerpc64le. I also did a
sanity build plus check-abi on all other supported architectures.
[1] Commit 9c96ff23858b0759e12ad69e3c4599931c90bee8
Adhemerval Zanella <adhemerval.zanella@linaro.org>
Yury Norov <ynorov@caviumnetworks.com>
* bits/typesizes.h (__RLIM_T_MATCHES_RLIM64_T): define.
* sysdeps/unix/sysv/linux/alpha/bits/typesizes.h
(__RLIM_T_MATCHES_RLIM64_T): Likewise.
* sysdeps/unix/sysv/linux/generic/bits/typesizes.h
(__RLIM_T_MATCHES_RLIM64_T): Likewise.
* sysdeps/unix/sysv/linux/s390/bits/typesizes.h [__s390x__]
(__RLIM_T_MATCHES_RLIM64_T): Likewise.
* sysdeps/unix/sysv/linux/sparc/bits/typesizes.h
[__arch64__ || __sparcv9] (__RLIM_T_MATCHES_RLIM64_T): Likewise.
* sysdeps/unix/sysv/linux/x86/bits/typesizes.h [__86_64__]
(__RLIM_T_MATCHES_RLIM64_T): Likewise.
* sysdeps/unix/sysv/linux/arm/Makefile [$(subdir) = resource]
(sysdep_routines): Remove oldgetrlimit64.
* sysdeps/unix/sysv/linux/i386/Makefile [$(subdir) = resource]
(sysdep_routines): Likewise.
* sysdeps/unix/sysv/linux/m68k/Makefile [$(subdir) = resource]
(sysdep_routines): Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/Makefile
[$(subdir) = resource] (sysdep_routines): Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/Makefile
[$(subdir) = resource] (sysdep_routines): Likewise.
* sysdeps/unix/sysv/linux/arm/getrlimit64.c: Remove file.
* sysdeps/unix/sysv/linux/arm/oldgetrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/hppa/getrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/i386/getrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/i386/oldgetrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/m68k/getrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/m68k/oldgetrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/powerpc/getrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/powerpc/oldgetrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/getrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/oldgetrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/sh/getrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/wordsize-64/getrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/wordsize-64/setrlimit64.c: Likewise.
* sysdeps/sysv/linux/generic/wordsize-32/syscalls.list: Remove
setrlimit and getrlimit.
* sysdeps/unix/sysv/linux/hppa/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/i386/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/wordsize-64/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/getrlimit.c: New file.
* sysdeps/unix/sysv/linux/sparc/getrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/setrlimit.c: Likewise.
* sysdeps/unix/sysv/linux/getrlimit64.c (__getrlimit64): Handle
__RLIM_T_MATCHES_RLIM64_T and add alias if defined.
(__old_getrlimit64): Add compatibility symbol.
* sysdeps/unix/sysv/linux/setrlimit64.c (__setrlimit): Likewise.
2016-10-18 11:41:56 +00:00
|
|
|
__setrlimit64 (enum __rlimit_resource resource, const struct rlimit64 *rlimits)
|
2010-12-26 01:12:27 +00:00
|
|
|
{
|
2017-05-09 14:05:09 +00:00
|
|
|
return INLINE_SYSCALL_CALL (prlimit64, 0, resource, rlimits, NULL);
|
2010-12-26 01:12:27 +00:00
|
|
|
}
|
Alpha: Fix the RLIM_INFINITY and RLIM64_INFINITY constants
Fix the RLIM_INFINITY and RLIM64_INFINITY constants on alpha to match
the kernel one and all other architectures. Change the getrlimit,
getrlimit64, setrlimit, setrlimit64 into old compat symbols, and provide
the Linux generic functions as GLIBC_2_27 version.
Changelog:
* sysdeps/unix/sysv/linux/getrlimit64.c [USE_VERSIONED_RLIMIT]: Do not
define getrlimit and getrlimit64 as weak aliases of __getrlimit64.
Define __GI_getrlimit64 as weak alias of __getrlimit64.
[__RLIM_T_MATCHES_RLIM64_T]: Do not redefine SHLIB_COMPAT, use #elif
instead.
* sysdeps/unix/sysv/linux/setrlimit64.c [USE_VERSIONED_RLIMIT]: Do not
define setrlimit and setrlimit64 as weak aliases of __setrlimit64.
* sysdeps/unix/sysv/linux/alpha/bits/resource.h (RLIM_INFINITY,
RLIM64_INFINITY): Fix values to match the kernel ones.
* sysdeps/unix/sysv/linux/alpha/getrlimit64.c: Define
USE_VERSIONED_RLIMIT. Rename __getrlimit64 into __old_getrlimit64 and
provide it as getrlimit@@GLIBC_2_0 and getrlimit64@@GLIBC_2_1. Add a
__getrlimit64 function and provide it as getrlimit@@GLIBC_2_27 and
getrlimit64@@GLIBC_2_27.
* sysdeps/unix/sysv/linux/alpha/setrlimit64.c: Ditto with setrlimit
and setrlimit64.
* sysdeps/unix/sysv/linux/alpha/libc.abilist (GLIBC_2.27): Add
getrlimit, setrlimit, getrlimit64 and setrlimit64.
* sysdeps/unix/sysv/linux/alpha/Versions (libc): Add getrlimit,
setrlimit, getrlimit64 and setrlimit64.
2018-01-05 19:34:10 +00:00
|
|
|
/* Alpha defines a versioned setrlimit{64}. */
|
|
|
|
#ifndef USE_VERSIONED_RLIMIT
|
Consolidate Linux setrlimit and getrlimit implementation
This patch consolidates all Linux setrlimit and getrlimit on the default
sysdeps/unix/sysv/linux/{set,get}rlimit{64}.c. It contains two exceptions:
1. mips32 and mips64n32 which requires a versioned symbol for GLIBC 2.19
and higher due a broken RLIM64_INFINITY constant.
2. sparc32 does not define a compat symbol for getrlimit64 for old 2GB
limit. I am not sure if it is required, but a RLIM_INFINITY fix [1]
change its definition without adding a compat symbol. This patch does
not aim to address this possible issue, it follow current symbol
export.
The default implementation uses prlimit64 for 64 bit rlim_t ({set,get}rlimit64)
and if it fails with ENOSYS it fall back to {get,set}rlimit syscall. This
code path is only used on kernel older than 2.6.36 (basically now only x86)
and I avoid to user __ASSUME_PRLIMTI64 to simplify the implementation. Once
x86 moves to be on par with other architectures regarding minimum kernel
supported we can get rid of using old syscalls and default path.
A new type size define is added, __RLIM_T_MATCHES_RLIM64_T, where is set as
default for 64 bits ports. This allows the default implementation to avoid
{get,set}rlimit building and alias {get,set}rlimit64 to {get,set}rlimit.
Checked on x86_64, i386, armhf, aarch64, and powerpc64le. I also did a
sanity build plus check-abi on all other supported architectures.
[1] Commit 9c96ff23858b0759e12ad69e3c4599931c90bee8
Adhemerval Zanella <adhemerval.zanella@linaro.org>
Yury Norov <ynorov@caviumnetworks.com>
* bits/typesizes.h (__RLIM_T_MATCHES_RLIM64_T): define.
* sysdeps/unix/sysv/linux/alpha/bits/typesizes.h
(__RLIM_T_MATCHES_RLIM64_T): Likewise.
* sysdeps/unix/sysv/linux/generic/bits/typesizes.h
(__RLIM_T_MATCHES_RLIM64_T): Likewise.
* sysdeps/unix/sysv/linux/s390/bits/typesizes.h [__s390x__]
(__RLIM_T_MATCHES_RLIM64_T): Likewise.
* sysdeps/unix/sysv/linux/sparc/bits/typesizes.h
[__arch64__ || __sparcv9] (__RLIM_T_MATCHES_RLIM64_T): Likewise.
* sysdeps/unix/sysv/linux/x86/bits/typesizes.h [__86_64__]
(__RLIM_T_MATCHES_RLIM64_T): Likewise.
* sysdeps/unix/sysv/linux/arm/Makefile [$(subdir) = resource]
(sysdep_routines): Remove oldgetrlimit64.
* sysdeps/unix/sysv/linux/i386/Makefile [$(subdir) = resource]
(sysdep_routines): Likewise.
* sysdeps/unix/sysv/linux/m68k/Makefile [$(subdir) = resource]
(sysdep_routines): Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/Makefile
[$(subdir) = resource] (sysdep_routines): Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/Makefile
[$(subdir) = resource] (sysdep_routines): Likewise.
* sysdeps/unix/sysv/linux/arm/getrlimit64.c: Remove file.
* sysdeps/unix/sysv/linux/arm/oldgetrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/hppa/getrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/i386/getrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/i386/oldgetrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/m68k/getrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/m68k/oldgetrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/powerpc/getrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/powerpc/oldgetrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/getrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/oldgetrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/sh/getrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/wordsize-64/getrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/wordsize-64/setrlimit64.c: Likewise.
* sysdeps/sysv/linux/generic/wordsize-32/syscalls.list: Remove
setrlimit and getrlimit.
* sysdeps/unix/sysv/linux/hppa/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/i386/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/wordsize-64/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/getrlimit.c: New file.
* sysdeps/unix/sysv/linux/sparc/getrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/setrlimit.c: Likewise.
* sysdeps/unix/sysv/linux/getrlimit64.c (__getrlimit64): Handle
__RLIM_T_MATCHES_RLIM64_T and add alias if defined.
(__old_getrlimit64): Add compatibility symbol.
* sysdeps/unix/sysv/linux/setrlimit64.c (__setrlimit): Likewise.
2016-10-18 11:41:56 +00:00
|
|
|
weak_alias (__setrlimit64, setrlimit64)
|
Alpha: Fix the RLIM_INFINITY and RLIM64_INFINITY constants
Fix the RLIM_INFINITY and RLIM64_INFINITY constants on alpha to match
the kernel one and all other architectures. Change the getrlimit,
getrlimit64, setrlimit, setrlimit64 into old compat symbols, and provide
the Linux generic functions as GLIBC_2_27 version.
Changelog:
* sysdeps/unix/sysv/linux/getrlimit64.c [USE_VERSIONED_RLIMIT]: Do not
define getrlimit and getrlimit64 as weak aliases of __getrlimit64.
Define __GI_getrlimit64 as weak alias of __getrlimit64.
[__RLIM_T_MATCHES_RLIM64_T]: Do not redefine SHLIB_COMPAT, use #elif
instead.
* sysdeps/unix/sysv/linux/setrlimit64.c [USE_VERSIONED_RLIMIT]: Do not
define setrlimit and setrlimit64 as weak aliases of __setrlimit64.
* sysdeps/unix/sysv/linux/alpha/bits/resource.h (RLIM_INFINITY,
RLIM64_INFINITY): Fix values to match the kernel ones.
* sysdeps/unix/sysv/linux/alpha/getrlimit64.c: Define
USE_VERSIONED_RLIMIT. Rename __getrlimit64 into __old_getrlimit64 and
provide it as getrlimit@@GLIBC_2_0 and getrlimit64@@GLIBC_2_1. Add a
__getrlimit64 function and provide it as getrlimit@@GLIBC_2_27 and
getrlimit64@@GLIBC_2_27.
* sysdeps/unix/sysv/linux/alpha/setrlimit64.c: Ditto with setrlimit
and setrlimit64.
* sysdeps/unix/sysv/linux/alpha/libc.abilist (GLIBC_2.27): Add
getrlimit, setrlimit, getrlimit64 and setrlimit64.
* sysdeps/unix/sysv/linux/alpha/Versions (libc): Add getrlimit,
setrlimit, getrlimit64 and setrlimit64.
2018-01-05 19:34:10 +00:00
|
|
|
#endif
|
Consolidate Linux setrlimit and getrlimit implementation
This patch consolidates all Linux setrlimit and getrlimit on the default
sysdeps/unix/sysv/linux/{set,get}rlimit{64}.c. It contains two exceptions:
1. mips32 and mips64n32 which requires a versioned symbol for GLIBC 2.19
and higher due a broken RLIM64_INFINITY constant.
2. sparc32 does not define a compat symbol for getrlimit64 for old 2GB
limit. I am not sure if it is required, but a RLIM_INFINITY fix [1]
change its definition without adding a compat symbol. This patch does
not aim to address this possible issue, it follow current symbol
export.
The default implementation uses prlimit64 for 64 bit rlim_t ({set,get}rlimit64)
and if it fails with ENOSYS it fall back to {get,set}rlimit syscall. This
code path is only used on kernel older than 2.6.36 (basically now only x86)
and I avoid to user __ASSUME_PRLIMTI64 to simplify the implementation. Once
x86 moves to be on par with other architectures regarding minimum kernel
supported we can get rid of using old syscalls and default path.
A new type size define is added, __RLIM_T_MATCHES_RLIM64_T, where is set as
default for 64 bits ports. This allows the default implementation to avoid
{get,set}rlimit building and alias {get,set}rlimit64 to {get,set}rlimit.
Checked on x86_64, i386, armhf, aarch64, and powerpc64le. I also did a
sanity build plus check-abi on all other supported architectures.
[1] Commit 9c96ff23858b0759e12ad69e3c4599931c90bee8
Adhemerval Zanella <adhemerval.zanella@linaro.org>
Yury Norov <ynorov@caviumnetworks.com>
* bits/typesizes.h (__RLIM_T_MATCHES_RLIM64_T): define.
* sysdeps/unix/sysv/linux/alpha/bits/typesizes.h
(__RLIM_T_MATCHES_RLIM64_T): Likewise.
* sysdeps/unix/sysv/linux/generic/bits/typesizes.h
(__RLIM_T_MATCHES_RLIM64_T): Likewise.
* sysdeps/unix/sysv/linux/s390/bits/typesizes.h [__s390x__]
(__RLIM_T_MATCHES_RLIM64_T): Likewise.
* sysdeps/unix/sysv/linux/sparc/bits/typesizes.h
[__arch64__ || __sparcv9] (__RLIM_T_MATCHES_RLIM64_T): Likewise.
* sysdeps/unix/sysv/linux/x86/bits/typesizes.h [__86_64__]
(__RLIM_T_MATCHES_RLIM64_T): Likewise.
* sysdeps/unix/sysv/linux/arm/Makefile [$(subdir) = resource]
(sysdep_routines): Remove oldgetrlimit64.
* sysdeps/unix/sysv/linux/i386/Makefile [$(subdir) = resource]
(sysdep_routines): Likewise.
* sysdeps/unix/sysv/linux/m68k/Makefile [$(subdir) = resource]
(sysdep_routines): Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/Makefile
[$(subdir) = resource] (sysdep_routines): Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/Makefile
[$(subdir) = resource] (sysdep_routines): Likewise.
* sysdeps/unix/sysv/linux/arm/getrlimit64.c: Remove file.
* sysdeps/unix/sysv/linux/arm/oldgetrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/hppa/getrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/i386/getrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/i386/oldgetrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/m68k/getrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/m68k/oldgetrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/powerpc/getrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/powerpc/oldgetrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/getrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/oldgetrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/sh/getrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/wordsize-64/getrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/wordsize-64/setrlimit64.c: Likewise.
* sysdeps/sysv/linux/generic/wordsize-32/syscalls.list: Remove
setrlimit and getrlimit.
* sysdeps/unix/sysv/linux/hppa/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/i386/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/wordsize-64/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/getrlimit.c: New file.
* sysdeps/unix/sysv/linux/sparc/getrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/setrlimit.c: Likewise.
* sysdeps/unix/sysv/linux/getrlimit64.c (__getrlimit64): Handle
__RLIM_T_MATCHES_RLIM64_T and add alias if defined.
(__old_getrlimit64): Add compatibility symbol.
* sysdeps/unix/sysv/linux/setrlimit64.c (__setrlimit): Likewise.
2016-10-18 11:41:56 +00:00
|
|
|
|
|
|
|
#if __RLIM_T_MATCHES_RLIM64_T
|
|
|
|
strong_alias (__setrlimit64, __setrlimit)
|
Alpha: Fix the RLIM_INFINITY and RLIM64_INFINITY constants
Fix the RLIM_INFINITY and RLIM64_INFINITY constants on alpha to match
the kernel one and all other architectures. Change the getrlimit,
getrlimit64, setrlimit, setrlimit64 into old compat symbols, and provide
the Linux generic functions as GLIBC_2_27 version.
Changelog:
* sysdeps/unix/sysv/linux/getrlimit64.c [USE_VERSIONED_RLIMIT]: Do not
define getrlimit and getrlimit64 as weak aliases of __getrlimit64.
Define __GI_getrlimit64 as weak alias of __getrlimit64.
[__RLIM_T_MATCHES_RLIM64_T]: Do not redefine SHLIB_COMPAT, use #elif
instead.
* sysdeps/unix/sysv/linux/setrlimit64.c [USE_VERSIONED_RLIMIT]: Do not
define setrlimit and setrlimit64 as weak aliases of __setrlimit64.
* sysdeps/unix/sysv/linux/alpha/bits/resource.h (RLIM_INFINITY,
RLIM64_INFINITY): Fix values to match the kernel ones.
* sysdeps/unix/sysv/linux/alpha/getrlimit64.c: Define
USE_VERSIONED_RLIMIT. Rename __getrlimit64 into __old_getrlimit64 and
provide it as getrlimit@@GLIBC_2_0 and getrlimit64@@GLIBC_2_1. Add a
__getrlimit64 function and provide it as getrlimit@@GLIBC_2_27 and
getrlimit64@@GLIBC_2_27.
* sysdeps/unix/sysv/linux/alpha/setrlimit64.c: Ditto with setrlimit
and setrlimit64.
* sysdeps/unix/sysv/linux/alpha/libc.abilist (GLIBC_2.27): Add
getrlimit, setrlimit, getrlimit64 and setrlimit64.
* sysdeps/unix/sysv/linux/alpha/Versions (libc): Add getrlimit,
setrlimit, getrlimit64 and setrlimit64.
2018-01-05 19:34:10 +00:00
|
|
|
# ifndef USE_VERSIONED_RLIMIT
|
Consolidate Linux setrlimit and getrlimit implementation
This patch consolidates all Linux setrlimit and getrlimit on the default
sysdeps/unix/sysv/linux/{set,get}rlimit{64}.c. It contains two exceptions:
1. mips32 and mips64n32 which requires a versioned symbol for GLIBC 2.19
and higher due a broken RLIM64_INFINITY constant.
2. sparc32 does not define a compat symbol for getrlimit64 for old 2GB
limit. I am not sure if it is required, but a RLIM_INFINITY fix [1]
change its definition without adding a compat symbol. This patch does
not aim to address this possible issue, it follow current symbol
export.
The default implementation uses prlimit64 for 64 bit rlim_t ({set,get}rlimit64)
and if it fails with ENOSYS it fall back to {get,set}rlimit syscall. This
code path is only used on kernel older than 2.6.36 (basically now only x86)
and I avoid to user __ASSUME_PRLIMTI64 to simplify the implementation. Once
x86 moves to be on par with other architectures regarding minimum kernel
supported we can get rid of using old syscalls and default path.
A new type size define is added, __RLIM_T_MATCHES_RLIM64_T, where is set as
default for 64 bits ports. This allows the default implementation to avoid
{get,set}rlimit building and alias {get,set}rlimit64 to {get,set}rlimit.
Checked on x86_64, i386, armhf, aarch64, and powerpc64le. I also did a
sanity build plus check-abi on all other supported architectures.
[1] Commit 9c96ff23858b0759e12ad69e3c4599931c90bee8
Adhemerval Zanella <adhemerval.zanella@linaro.org>
Yury Norov <ynorov@caviumnetworks.com>
* bits/typesizes.h (__RLIM_T_MATCHES_RLIM64_T): define.
* sysdeps/unix/sysv/linux/alpha/bits/typesizes.h
(__RLIM_T_MATCHES_RLIM64_T): Likewise.
* sysdeps/unix/sysv/linux/generic/bits/typesizes.h
(__RLIM_T_MATCHES_RLIM64_T): Likewise.
* sysdeps/unix/sysv/linux/s390/bits/typesizes.h [__s390x__]
(__RLIM_T_MATCHES_RLIM64_T): Likewise.
* sysdeps/unix/sysv/linux/sparc/bits/typesizes.h
[__arch64__ || __sparcv9] (__RLIM_T_MATCHES_RLIM64_T): Likewise.
* sysdeps/unix/sysv/linux/x86/bits/typesizes.h [__86_64__]
(__RLIM_T_MATCHES_RLIM64_T): Likewise.
* sysdeps/unix/sysv/linux/arm/Makefile [$(subdir) = resource]
(sysdep_routines): Remove oldgetrlimit64.
* sysdeps/unix/sysv/linux/i386/Makefile [$(subdir) = resource]
(sysdep_routines): Likewise.
* sysdeps/unix/sysv/linux/m68k/Makefile [$(subdir) = resource]
(sysdep_routines): Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/Makefile
[$(subdir) = resource] (sysdep_routines): Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/Makefile
[$(subdir) = resource] (sysdep_routines): Likewise.
* sysdeps/unix/sysv/linux/arm/getrlimit64.c: Remove file.
* sysdeps/unix/sysv/linux/arm/oldgetrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/hppa/getrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/i386/getrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/i386/oldgetrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/m68k/getrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/m68k/oldgetrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/powerpc/getrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/powerpc/oldgetrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/getrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/oldgetrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/sh/getrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/wordsize-64/getrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/wordsize-64/setrlimit64.c: Likewise.
* sysdeps/sysv/linux/generic/wordsize-32/syscalls.list: Remove
setrlimit and getrlimit.
* sysdeps/unix/sysv/linux/hppa/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/i386/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/wordsize-64/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/getrlimit.c: New file.
* sysdeps/unix/sysv/linux/sparc/getrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/setrlimit.c: Likewise.
* sysdeps/unix/sysv/linux/getrlimit64.c (__getrlimit64): Handle
__RLIM_T_MATCHES_RLIM64_T and add alias if defined.
(__old_getrlimit64): Add compatibility symbol.
* sysdeps/unix/sysv/linux/setrlimit64.c (__setrlimit): Likewise.
2016-10-18 11:41:56 +00:00
|
|
|
weak_alias (__setrlimit64, setrlimit)
|
Alpha: Fix the RLIM_INFINITY and RLIM64_INFINITY constants
Fix the RLIM_INFINITY and RLIM64_INFINITY constants on alpha to match
the kernel one and all other architectures. Change the getrlimit,
getrlimit64, setrlimit, setrlimit64 into old compat symbols, and provide
the Linux generic functions as GLIBC_2_27 version.
Changelog:
* sysdeps/unix/sysv/linux/getrlimit64.c [USE_VERSIONED_RLIMIT]: Do not
define getrlimit and getrlimit64 as weak aliases of __getrlimit64.
Define __GI_getrlimit64 as weak alias of __getrlimit64.
[__RLIM_T_MATCHES_RLIM64_T]: Do not redefine SHLIB_COMPAT, use #elif
instead.
* sysdeps/unix/sysv/linux/setrlimit64.c [USE_VERSIONED_RLIMIT]: Do not
define setrlimit and setrlimit64 as weak aliases of __setrlimit64.
* sysdeps/unix/sysv/linux/alpha/bits/resource.h (RLIM_INFINITY,
RLIM64_INFINITY): Fix values to match the kernel ones.
* sysdeps/unix/sysv/linux/alpha/getrlimit64.c: Define
USE_VERSIONED_RLIMIT. Rename __getrlimit64 into __old_getrlimit64 and
provide it as getrlimit@@GLIBC_2_0 and getrlimit64@@GLIBC_2_1. Add a
__getrlimit64 function and provide it as getrlimit@@GLIBC_2_27 and
getrlimit64@@GLIBC_2_27.
* sysdeps/unix/sysv/linux/alpha/setrlimit64.c: Ditto with setrlimit
and setrlimit64.
* sysdeps/unix/sysv/linux/alpha/libc.abilist (GLIBC_2.27): Add
getrlimit, setrlimit, getrlimit64 and setrlimit64.
* sysdeps/unix/sysv/linux/alpha/Versions (libc): Add getrlimit,
setrlimit, getrlimit64 and setrlimit64.
2018-01-05 19:34:10 +00:00
|
|
|
# endif
|
2017-10-02 00:46:39 +00:00
|
|
|
# ifdef SHARED
|
|
|
|
__hidden_ver1 (__setrlimit64, __GI___setrlimit, __setrlimit64);
|
|
|
|
# endif
|
Consolidate Linux setrlimit and getrlimit implementation
This patch consolidates all Linux setrlimit and getrlimit on the default
sysdeps/unix/sysv/linux/{set,get}rlimit{64}.c. It contains two exceptions:
1. mips32 and mips64n32 which requires a versioned symbol for GLIBC 2.19
and higher due a broken RLIM64_INFINITY constant.
2. sparc32 does not define a compat symbol for getrlimit64 for old 2GB
limit. I am not sure if it is required, but a RLIM_INFINITY fix [1]
change its definition without adding a compat symbol. This patch does
not aim to address this possible issue, it follow current symbol
export.
The default implementation uses prlimit64 for 64 bit rlim_t ({set,get}rlimit64)
and if it fails with ENOSYS it fall back to {get,set}rlimit syscall. This
code path is only used on kernel older than 2.6.36 (basically now only x86)
and I avoid to user __ASSUME_PRLIMTI64 to simplify the implementation. Once
x86 moves to be on par with other architectures regarding minimum kernel
supported we can get rid of using old syscalls and default path.
A new type size define is added, __RLIM_T_MATCHES_RLIM64_T, where is set as
default for 64 bits ports. This allows the default implementation to avoid
{get,set}rlimit building and alias {get,set}rlimit64 to {get,set}rlimit.
Checked on x86_64, i386, armhf, aarch64, and powerpc64le. I also did a
sanity build plus check-abi on all other supported architectures.
[1] Commit 9c96ff23858b0759e12ad69e3c4599931c90bee8
Adhemerval Zanella <adhemerval.zanella@linaro.org>
Yury Norov <ynorov@caviumnetworks.com>
* bits/typesizes.h (__RLIM_T_MATCHES_RLIM64_T): define.
* sysdeps/unix/sysv/linux/alpha/bits/typesizes.h
(__RLIM_T_MATCHES_RLIM64_T): Likewise.
* sysdeps/unix/sysv/linux/generic/bits/typesizes.h
(__RLIM_T_MATCHES_RLIM64_T): Likewise.
* sysdeps/unix/sysv/linux/s390/bits/typesizes.h [__s390x__]
(__RLIM_T_MATCHES_RLIM64_T): Likewise.
* sysdeps/unix/sysv/linux/sparc/bits/typesizes.h
[__arch64__ || __sparcv9] (__RLIM_T_MATCHES_RLIM64_T): Likewise.
* sysdeps/unix/sysv/linux/x86/bits/typesizes.h [__86_64__]
(__RLIM_T_MATCHES_RLIM64_T): Likewise.
* sysdeps/unix/sysv/linux/arm/Makefile [$(subdir) = resource]
(sysdep_routines): Remove oldgetrlimit64.
* sysdeps/unix/sysv/linux/i386/Makefile [$(subdir) = resource]
(sysdep_routines): Likewise.
* sysdeps/unix/sysv/linux/m68k/Makefile [$(subdir) = resource]
(sysdep_routines): Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/Makefile
[$(subdir) = resource] (sysdep_routines): Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/Makefile
[$(subdir) = resource] (sysdep_routines): Likewise.
* sysdeps/unix/sysv/linux/arm/getrlimit64.c: Remove file.
* sysdeps/unix/sysv/linux/arm/oldgetrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/hppa/getrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/i386/getrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/i386/oldgetrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/m68k/getrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/m68k/oldgetrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/powerpc/getrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/powerpc/oldgetrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/getrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/oldgetrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/sh/getrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/wordsize-64/getrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/wordsize-64/setrlimit64.c: Likewise.
* sysdeps/sysv/linux/generic/wordsize-32/syscalls.list: Remove
setrlimit and getrlimit.
* sysdeps/unix/sysv/linux/hppa/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/i386/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/wordsize-64/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/getrlimit.c: New file.
* sysdeps/unix/sysv/linux/sparc/getrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/setrlimit.c: Likewise.
* sysdeps/unix/sysv/linux/getrlimit64.c (__getrlimit64): Handle
__RLIM_T_MATCHES_RLIM64_T and add alias if defined.
(__old_getrlimit64): Add compatibility symbol.
* sysdeps/unix/sysv/linux/setrlimit64.c (__setrlimit): Likewise.
2016-10-18 11:41:56 +00:00
|
|
|
#endif
|