glibc/sysdeps/x86/configure.ac

130 lines
3.7 KiB
Plaintext
Raw Normal View History

x86: Support IBT and SHSTK in Intel CET [BZ #21598] Intel Control-flow Enforcement Technology (CET) instructions: https://software.intel.com/sites/default/files/managed/4d/2a/control-flow-en forcement-technology-preview.pdf includes Indirect Branch Tracking (IBT) and Shadow Stack (SHSTK). GNU_PROPERTY_X86_FEATURE_1_IBT is added to GNU program property to indicate that all executable sections are compatible with IBT when ENDBR instruction starts each valid target where an indirect branch instruction can land. Linker sets GNU_PROPERTY_X86_FEATURE_1_IBT on output only if it is set on all relocatable inputs. On an IBT capable processor, the following steps should be taken: 1. When loading an executable without an interpreter, enable IBT and lock IBT if GNU_PROPERTY_X86_FEATURE_1_IBT is set on the executable. 2. When loading an executable with an interpreter, enable IBT if GNU_PROPERTY_X86_FEATURE_1_IBT is set on the interpreter. a. If GNU_PROPERTY_X86_FEATURE_1_IBT isn't set on the executable, disable IBT. b. Lock IBT. 3. If IBT is enabled, when loading a shared object without GNU_PROPERTY_X86_FEATURE_1_IBT: a. If legacy interwork is allowed, then mark all pages in executable PT_LOAD segments in legacy code page bitmap. Failure of legacy code page bitmap allocation causes an error. b. If legacy interwork isn't allowed, it causes an error. GNU_PROPERTY_X86_FEATURE_1_SHSTK is added to GNU program property to indicate that all executable sections are compatible with SHSTK where return address popped from shadow stack always matches return address popped from normal stack. Linker sets GNU_PROPERTY_X86_FEATURE_1_SHSTK on output only if it is set on all relocatable inputs. On a SHSTK capable processor, the following steps should be taken: 1. When loading an executable without an interpreter, enable SHSTK if GNU_PROPERTY_X86_FEATURE_1_SHSTK is set on the executable. 2. When loading an executable with an interpreter, enable SHSTK if GNU_PROPERTY_X86_FEATURE_1_SHSTK is set on interpreter. a. If GNU_PROPERTY_X86_FEATURE_1_SHSTK isn't set on the executable or any shared objects loaded via the DT_NEEDED tag, disable SHSTK. b. Otherwise lock SHSTK. 3. After SHSTK is enabled, it is an error to load a shared object without GNU_PROPERTY_X86_FEATURE_1_SHSTK. To enable CET support in glibc, --enable-cet is required to configure glibc. When CET is enabled, both compiler and assembler must support CET. Otherwise, it is a configure-time error. To support CET run-time control, 1. _dl_x86_feature_1 is added to the writable ld.so namespace to indicate if IBT or SHSTK are enabled at run-time. It should be initialized by init_cpu_features. 2. For dynamic executables: a. A l_cet field is added to struct link_map to indicate if IBT or SHSTK is enabled in an ELF module. _dl_process_pt_note or _rtld_process_pt_note is called to process PT_NOTE segment for GNU program property and set l_cet. b. _dl_open_check is added to check IBT and SHSTK compatibilty when dlopening a shared object. 3. Replace i386 _dl_runtime_resolve and _dl_runtime_profile with _dl_runtime_resolve_shstk and _dl_runtime_profile_shstk, respectively if SHSTK is enabled. CET run-time control can be changed via GLIBC_TUNABLES with $ export GLIBC_TUNABLES=glibc.tune.x86_shstk=[permissive|on|off] $ export GLIBC_TUNABLES=glibc.tune.x86_ibt=[permissive|on|off] 1. permissive: SHSTK is disabled when dlopening a legacy ELF module. 2. on: IBT or SHSTK are always enabled, regardless if there are IBT or SHSTK bits in GNU program property. 3. off: IBT or SHSTK are always disabled, regardless if there are IBT or SHSTK bits in GNU program property. <cet.h> from CET-enabled GCC is automatically included by assembly codes to add GNU_PROPERTY_X86_FEATURE_1_IBT and GNU_PROPERTY_X86_FEATURE_1_SHSTK to GNU program property. _CET_ENDBR is added at the entrance of all assembly functions whose address may be taken. _CET_NOTRACK is used to insert NOTRACK prefix with indirect jump table to support IBT. It is defined as notrack when _CET_NOTRACK is defined in <cet.h>. [BZ #21598] * configure.ac: Add --enable-cet. * configure: Regenerated. * elf/Makefille (all-built-dso): Add a comment. * elf/dl-load.c (filebuf): Moved before "dynamic-link.h". Include <dl-prop.h>. (_dl_map_object_from_fd): Call _dl_process_pt_note on PT_NOTE segment. * elf/dl-open.c: Include <dl-prop.h>. (dl_open_worker): Call _dl_open_check. * elf/rtld.c: Include <dl-prop.h>. (dl_main): Call _rtld_process_pt_note on PT_NOTE segment. Call _rtld_main_check. * sysdeps/generic/dl-prop.h: New file. * sysdeps/i386/dl-cet.c: Likewise. * sysdeps/unix/sysv/linux/x86/cpu-features.c: Likewise. * sysdeps/unix/sysv/linux/x86/dl-cet.h: Likewise. * sysdeps/x86/cet-tunables.h: Likewise. * sysdeps/x86/check-cet.awk: Likewise. * sysdeps/x86/configure: Likewise. * sysdeps/x86/configure.ac: Likewise. * sysdeps/x86/dl-cet.c: Likewise. * sysdeps/x86/dl-procruntime.c: Likewise. * sysdeps/x86/dl-prop.h: Likewise. * sysdeps/x86/libc-start.h: Likewise. * sysdeps/x86/link_map.h: Likewise. * sysdeps/i386/dl-trampoline.S (_dl_runtime_resolve): Add _CET_ENDBR. (_dl_runtime_profile): Likewise. (_dl_runtime_resolve_shstk): New. (_dl_runtime_profile_shstk): Likewise. * sysdeps/linux/x86/Makefile (sysdep-dl-routines): Add dl-cet if CET is enabled. (CFLAGS-.o): Add -fcf-protection if CET is enabled. (CFLAGS-.os): Likewise. (CFLAGS-.op): Likewise. (CFLAGS-.oS): Likewise. (asm-CPPFLAGS): Add -fcf-protection -include cet.h if CET is enabled. (tests-special): Add $(objpfx)check-cet.out. (cet-built-dso): New. (+$(cet-built-dso:=.note)): Likewise. (common-generated): Add $(cet-built-dso:$(common-objpfx)%=%.note). ($(objpfx)check-cet.out): New. (generated): Add check-cet.out. * sysdeps/x86/cpu-features.c: Include <dl-cet.h> and <cet-tunables.h>. (TUNABLE_CALLBACK (set_x86_ibt)): New prototype. (TUNABLE_CALLBACK (set_x86_shstk)): Likewise. (init_cpu_features): Call get_cet_status to check CET status and update dl_x86_feature_1 with CET status. Call TUNABLE_CALLBACK (set_x86_ibt) and TUNABLE_CALLBACK (set_x86_shstk). Disable and lock CET in libc.a. * sysdeps/x86/cpu-tunables.c: Include <cet-tunables.h>. (TUNABLE_CALLBACK (set_x86_ibt)): New function. (TUNABLE_CALLBACK (set_x86_shstk)): Likewise. * sysdeps/x86/sysdep.h (_CET_NOTRACK): New. (_CET_ENDBR): Define if not defined. (ENTRY): Add _CET_ENDBR. * sysdeps/x86/dl-tunables.list (glibc.tune): Add x86_ibt and x86_shstk. * sysdeps/x86_64/dl-trampoline.h (_dl_runtime_resolve): Add _CET_ENDBR. (_dl_runtime_profile): Likewise.
2018-07-16 21:08:15 +00:00
GLIBC_PROVIDES dnl See aclocal.m4 in the top level source directory.
# Local configure fragment for sysdeps/x86.
if test $enable_cet != no; then
x86: Support IBT and SHSTK in Intel CET [BZ #21598] Intel Control-flow Enforcement Technology (CET) instructions: https://software.intel.com/sites/default/files/managed/4d/2a/control-flow-en forcement-technology-preview.pdf includes Indirect Branch Tracking (IBT) and Shadow Stack (SHSTK). GNU_PROPERTY_X86_FEATURE_1_IBT is added to GNU program property to indicate that all executable sections are compatible with IBT when ENDBR instruction starts each valid target where an indirect branch instruction can land. Linker sets GNU_PROPERTY_X86_FEATURE_1_IBT on output only if it is set on all relocatable inputs. On an IBT capable processor, the following steps should be taken: 1. When loading an executable without an interpreter, enable IBT and lock IBT if GNU_PROPERTY_X86_FEATURE_1_IBT is set on the executable. 2. When loading an executable with an interpreter, enable IBT if GNU_PROPERTY_X86_FEATURE_1_IBT is set on the interpreter. a. If GNU_PROPERTY_X86_FEATURE_1_IBT isn't set on the executable, disable IBT. b. Lock IBT. 3. If IBT is enabled, when loading a shared object without GNU_PROPERTY_X86_FEATURE_1_IBT: a. If legacy interwork is allowed, then mark all pages in executable PT_LOAD segments in legacy code page bitmap. Failure of legacy code page bitmap allocation causes an error. b. If legacy interwork isn't allowed, it causes an error. GNU_PROPERTY_X86_FEATURE_1_SHSTK is added to GNU program property to indicate that all executable sections are compatible with SHSTK where return address popped from shadow stack always matches return address popped from normal stack. Linker sets GNU_PROPERTY_X86_FEATURE_1_SHSTK on output only if it is set on all relocatable inputs. On a SHSTK capable processor, the following steps should be taken: 1. When loading an executable without an interpreter, enable SHSTK if GNU_PROPERTY_X86_FEATURE_1_SHSTK is set on the executable. 2. When loading an executable with an interpreter, enable SHSTK if GNU_PROPERTY_X86_FEATURE_1_SHSTK is set on interpreter. a. If GNU_PROPERTY_X86_FEATURE_1_SHSTK isn't set on the executable or any shared objects loaded via the DT_NEEDED tag, disable SHSTK. b. Otherwise lock SHSTK. 3. After SHSTK is enabled, it is an error to load a shared object without GNU_PROPERTY_X86_FEATURE_1_SHSTK. To enable CET support in glibc, --enable-cet is required to configure glibc. When CET is enabled, both compiler and assembler must support CET. Otherwise, it is a configure-time error. To support CET run-time control, 1. _dl_x86_feature_1 is added to the writable ld.so namespace to indicate if IBT or SHSTK are enabled at run-time. It should be initialized by init_cpu_features. 2. For dynamic executables: a. A l_cet field is added to struct link_map to indicate if IBT or SHSTK is enabled in an ELF module. _dl_process_pt_note or _rtld_process_pt_note is called to process PT_NOTE segment for GNU program property and set l_cet. b. _dl_open_check is added to check IBT and SHSTK compatibilty when dlopening a shared object. 3. Replace i386 _dl_runtime_resolve and _dl_runtime_profile with _dl_runtime_resolve_shstk and _dl_runtime_profile_shstk, respectively if SHSTK is enabled. CET run-time control can be changed via GLIBC_TUNABLES with $ export GLIBC_TUNABLES=glibc.tune.x86_shstk=[permissive|on|off] $ export GLIBC_TUNABLES=glibc.tune.x86_ibt=[permissive|on|off] 1. permissive: SHSTK is disabled when dlopening a legacy ELF module. 2. on: IBT or SHSTK are always enabled, regardless if there are IBT or SHSTK bits in GNU program property. 3. off: IBT or SHSTK are always disabled, regardless if there are IBT or SHSTK bits in GNU program property. <cet.h> from CET-enabled GCC is automatically included by assembly codes to add GNU_PROPERTY_X86_FEATURE_1_IBT and GNU_PROPERTY_X86_FEATURE_1_SHSTK to GNU program property. _CET_ENDBR is added at the entrance of all assembly functions whose address may be taken. _CET_NOTRACK is used to insert NOTRACK prefix with indirect jump table to support IBT. It is defined as notrack when _CET_NOTRACK is defined in <cet.h>. [BZ #21598] * configure.ac: Add --enable-cet. * configure: Regenerated. * elf/Makefille (all-built-dso): Add a comment. * elf/dl-load.c (filebuf): Moved before "dynamic-link.h". Include <dl-prop.h>. (_dl_map_object_from_fd): Call _dl_process_pt_note on PT_NOTE segment. * elf/dl-open.c: Include <dl-prop.h>. (dl_open_worker): Call _dl_open_check. * elf/rtld.c: Include <dl-prop.h>. (dl_main): Call _rtld_process_pt_note on PT_NOTE segment. Call _rtld_main_check. * sysdeps/generic/dl-prop.h: New file. * sysdeps/i386/dl-cet.c: Likewise. * sysdeps/unix/sysv/linux/x86/cpu-features.c: Likewise. * sysdeps/unix/sysv/linux/x86/dl-cet.h: Likewise. * sysdeps/x86/cet-tunables.h: Likewise. * sysdeps/x86/check-cet.awk: Likewise. * sysdeps/x86/configure: Likewise. * sysdeps/x86/configure.ac: Likewise. * sysdeps/x86/dl-cet.c: Likewise. * sysdeps/x86/dl-procruntime.c: Likewise. * sysdeps/x86/dl-prop.h: Likewise. * sysdeps/x86/libc-start.h: Likewise. * sysdeps/x86/link_map.h: Likewise. * sysdeps/i386/dl-trampoline.S (_dl_runtime_resolve): Add _CET_ENDBR. (_dl_runtime_profile): Likewise. (_dl_runtime_resolve_shstk): New. (_dl_runtime_profile_shstk): Likewise. * sysdeps/linux/x86/Makefile (sysdep-dl-routines): Add dl-cet if CET is enabled. (CFLAGS-.o): Add -fcf-protection if CET is enabled. (CFLAGS-.os): Likewise. (CFLAGS-.op): Likewise. (CFLAGS-.oS): Likewise. (asm-CPPFLAGS): Add -fcf-protection -include cet.h if CET is enabled. (tests-special): Add $(objpfx)check-cet.out. (cet-built-dso): New. (+$(cet-built-dso:=.note)): Likewise. (common-generated): Add $(cet-built-dso:$(common-objpfx)%=%.note). ($(objpfx)check-cet.out): New. (generated): Add check-cet.out. * sysdeps/x86/cpu-features.c: Include <dl-cet.h> and <cet-tunables.h>. (TUNABLE_CALLBACK (set_x86_ibt)): New prototype. (TUNABLE_CALLBACK (set_x86_shstk)): Likewise. (init_cpu_features): Call get_cet_status to check CET status and update dl_x86_feature_1 with CET status. Call TUNABLE_CALLBACK (set_x86_ibt) and TUNABLE_CALLBACK (set_x86_shstk). Disable and lock CET in libc.a. * sysdeps/x86/cpu-tunables.c: Include <cet-tunables.h>. (TUNABLE_CALLBACK (set_x86_ibt)): New function. (TUNABLE_CALLBACK (set_x86_shstk)): Likewise. * sysdeps/x86/sysdep.h (_CET_NOTRACK): New. (_CET_ENDBR): Define if not defined. (ENTRY): Add _CET_ENDBR. * sysdeps/x86/dl-tunables.list (glibc.tune): Add x86_ibt and x86_shstk. * sysdeps/x86_64/dl-trampoline.h (_dl_runtime_resolve): Add _CET_ENDBR. (_dl_runtime_profile): Likewise.
2018-07-16 21:08:15 +00:00
# Check if CET can be enabled.
AC_CACHE_CHECK(whether CET can be enabled,
libc_cv_x86_cet_available, [dnl
cat > conftest.c <<EOF
#if !defined __CET__ || __CET__ != 3
# error CET isn't available.
#endif
EOF
if AC_TRY_COMMAND(${CC-cc} -c $CFLAGS -fcf-protection -include cet.h conftest.c 1>&AS_MESSAGE_LOG_FD); then
libc_cv_x86_cet_available=yes
else
libc_cv_x86_cet_available=no
fi
rm -rf conftest*])
if test $libc_cv_x86_cet_available != yes; then
AC_MSG_ERROR([$CC doesn't support CET])
x86: Support IBT and SHSTK in Intel CET [BZ #21598] Intel Control-flow Enforcement Technology (CET) instructions: https://software.intel.com/sites/default/files/managed/4d/2a/control-flow-en forcement-technology-preview.pdf includes Indirect Branch Tracking (IBT) and Shadow Stack (SHSTK). GNU_PROPERTY_X86_FEATURE_1_IBT is added to GNU program property to indicate that all executable sections are compatible with IBT when ENDBR instruction starts each valid target where an indirect branch instruction can land. Linker sets GNU_PROPERTY_X86_FEATURE_1_IBT on output only if it is set on all relocatable inputs. On an IBT capable processor, the following steps should be taken: 1. When loading an executable without an interpreter, enable IBT and lock IBT if GNU_PROPERTY_X86_FEATURE_1_IBT is set on the executable. 2. When loading an executable with an interpreter, enable IBT if GNU_PROPERTY_X86_FEATURE_1_IBT is set on the interpreter. a. If GNU_PROPERTY_X86_FEATURE_1_IBT isn't set on the executable, disable IBT. b. Lock IBT. 3. If IBT is enabled, when loading a shared object without GNU_PROPERTY_X86_FEATURE_1_IBT: a. If legacy interwork is allowed, then mark all pages in executable PT_LOAD segments in legacy code page bitmap. Failure of legacy code page bitmap allocation causes an error. b. If legacy interwork isn't allowed, it causes an error. GNU_PROPERTY_X86_FEATURE_1_SHSTK is added to GNU program property to indicate that all executable sections are compatible with SHSTK where return address popped from shadow stack always matches return address popped from normal stack. Linker sets GNU_PROPERTY_X86_FEATURE_1_SHSTK on output only if it is set on all relocatable inputs. On a SHSTK capable processor, the following steps should be taken: 1. When loading an executable without an interpreter, enable SHSTK if GNU_PROPERTY_X86_FEATURE_1_SHSTK is set on the executable. 2. When loading an executable with an interpreter, enable SHSTK if GNU_PROPERTY_X86_FEATURE_1_SHSTK is set on interpreter. a. If GNU_PROPERTY_X86_FEATURE_1_SHSTK isn't set on the executable or any shared objects loaded via the DT_NEEDED tag, disable SHSTK. b. Otherwise lock SHSTK. 3. After SHSTK is enabled, it is an error to load a shared object without GNU_PROPERTY_X86_FEATURE_1_SHSTK. To enable CET support in glibc, --enable-cet is required to configure glibc. When CET is enabled, both compiler and assembler must support CET. Otherwise, it is a configure-time error. To support CET run-time control, 1. _dl_x86_feature_1 is added to the writable ld.so namespace to indicate if IBT or SHSTK are enabled at run-time. It should be initialized by init_cpu_features. 2. For dynamic executables: a. A l_cet field is added to struct link_map to indicate if IBT or SHSTK is enabled in an ELF module. _dl_process_pt_note or _rtld_process_pt_note is called to process PT_NOTE segment for GNU program property and set l_cet. b. _dl_open_check is added to check IBT and SHSTK compatibilty when dlopening a shared object. 3. Replace i386 _dl_runtime_resolve and _dl_runtime_profile with _dl_runtime_resolve_shstk and _dl_runtime_profile_shstk, respectively if SHSTK is enabled. CET run-time control can be changed via GLIBC_TUNABLES with $ export GLIBC_TUNABLES=glibc.tune.x86_shstk=[permissive|on|off] $ export GLIBC_TUNABLES=glibc.tune.x86_ibt=[permissive|on|off] 1. permissive: SHSTK is disabled when dlopening a legacy ELF module. 2. on: IBT or SHSTK are always enabled, regardless if there are IBT or SHSTK bits in GNU program property. 3. off: IBT or SHSTK are always disabled, regardless if there are IBT or SHSTK bits in GNU program property. <cet.h> from CET-enabled GCC is automatically included by assembly codes to add GNU_PROPERTY_X86_FEATURE_1_IBT and GNU_PROPERTY_X86_FEATURE_1_SHSTK to GNU program property. _CET_ENDBR is added at the entrance of all assembly functions whose address may be taken. _CET_NOTRACK is used to insert NOTRACK prefix with indirect jump table to support IBT. It is defined as notrack when _CET_NOTRACK is defined in <cet.h>. [BZ #21598] * configure.ac: Add --enable-cet. * configure: Regenerated. * elf/Makefille (all-built-dso): Add a comment. * elf/dl-load.c (filebuf): Moved before "dynamic-link.h". Include <dl-prop.h>. (_dl_map_object_from_fd): Call _dl_process_pt_note on PT_NOTE segment. * elf/dl-open.c: Include <dl-prop.h>. (dl_open_worker): Call _dl_open_check. * elf/rtld.c: Include <dl-prop.h>. (dl_main): Call _rtld_process_pt_note on PT_NOTE segment. Call _rtld_main_check. * sysdeps/generic/dl-prop.h: New file. * sysdeps/i386/dl-cet.c: Likewise. * sysdeps/unix/sysv/linux/x86/cpu-features.c: Likewise. * sysdeps/unix/sysv/linux/x86/dl-cet.h: Likewise. * sysdeps/x86/cet-tunables.h: Likewise. * sysdeps/x86/check-cet.awk: Likewise. * sysdeps/x86/configure: Likewise. * sysdeps/x86/configure.ac: Likewise. * sysdeps/x86/dl-cet.c: Likewise. * sysdeps/x86/dl-procruntime.c: Likewise. * sysdeps/x86/dl-prop.h: Likewise. * sysdeps/x86/libc-start.h: Likewise. * sysdeps/x86/link_map.h: Likewise. * sysdeps/i386/dl-trampoline.S (_dl_runtime_resolve): Add _CET_ENDBR. (_dl_runtime_profile): Likewise. (_dl_runtime_resolve_shstk): New. (_dl_runtime_profile_shstk): Likewise. * sysdeps/linux/x86/Makefile (sysdep-dl-routines): Add dl-cet if CET is enabled. (CFLAGS-.o): Add -fcf-protection if CET is enabled. (CFLAGS-.os): Likewise. (CFLAGS-.op): Likewise. (CFLAGS-.oS): Likewise. (asm-CPPFLAGS): Add -fcf-protection -include cet.h if CET is enabled. (tests-special): Add $(objpfx)check-cet.out. (cet-built-dso): New. (+$(cet-built-dso:=.note)): Likewise. (common-generated): Add $(cet-built-dso:$(common-objpfx)%=%.note). ($(objpfx)check-cet.out): New. (generated): Add check-cet.out. * sysdeps/x86/cpu-features.c: Include <dl-cet.h> and <cet-tunables.h>. (TUNABLE_CALLBACK (set_x86_ibt)): New prototype. (TUNABLE_CALLBACK (set_x86_shstk)): Likewise. (init_cpu_features): Call get_cet_status to check CET status and update dl_x86_feature_1 with CET status. Call TUNABLE_CALLBACK (set_x86_ibt) and TUNABLE_CALLBACK (set_x86_shstk). Disable and lock CET in libc.a. * sysdeps/x86/cpu-tunables.c: Include <cet-tunables.h>. (TUNABLE_CALLBACK (set_x86_ibt)): New function. (TUNABLE_CALLBACK (set_x86_shstk)): Likewise. * sysdeps/x86/sysdep.h (_CET_NOTRACK): New. (_CET_ENDBR): Define if not defined. (ENTRY): Add _CET_ENDBR. * sysdeps/x86/dl-tunables.list (glibc.tune): Add x86_ibt and x86_shstk. * sysdeps/x86_64/dl-trampoline.h (_dl_runtime_resolve): Add _CET_ENDBR. (_dl_runtime_profile): Likewise.
2018-07-16 21:08:15 +00:00
fi
fi
if test $enable_cet != no; then
x86: Support IBT and SHSTK in Intel CET [BZ #21598] Intel Control-flow Enforcement Technology (CET) instructions: https://software.intel.com/sites/default/files/managed/4d/2a/control-flow-en forcement-technology-preview.pdf includes Indirect Branch Tracking (IBT) and Shadow Stack (SHSTK). GNU_PROPERTY_X86_FEATURE_1_IBT is added to GNU program property to indicate that all executable sections are compatible with IBT when ENDBR instruction starts each valid target where an indirect branch instruction can land. Linker sets GNU_PROPERTY_X86_FEATURE_1_IBT on output only if it is set on all relocatable inputs. On an IBT capable processor, the following steps should be taken: 1. When loading an executable without an interpreter, enable IBT and lock IBT if GNU_PROPERTY_X86_FEATURE_1_IBT is set on the executable. 2. When loading an executable with an interpreter, enable IBT if GNU_PROPERTY_X86_FEATURE_1_IBT is set on the interpreter. a. If GNU_PROPERTY_X86_FEATURE_1_IBT isn't set on the executable, disable IBT. b. Lock IBT. 3. If IBT is enabled, when loading a shared object without GNU_PROPERTY_X86_FEATURE_1_IBT: a. If legacy interwork is allowed, then mark all pages in executable PT_LOAD segments in legacy code page bitmap. Failure of legacy code page bitmap allocation causes an error. b. If legacy interwork isn't allowed, it causes an error. GNU_PROPERTY_X86_FEATURE_1_SHSTK is added to GNU program property to indicate that all executable sections are compatible with SHSTK where return address popped from shadow stack always matches return address popped from normal stack. Linker sets GNU_PROPERTY_X86_FEATURE_1_SHSTK on output only if it is set on all relocatable inputs. On a SHSTK capable processor, the following steps should be taken: 1. When loading an executable without an interpreter, enable SHSTK if GNU_PROPERTY_X86_FEATURE_1_SHSTK is set on the executable. 2. When loading an executable with an interpreter, enable SHSTK if GNU_PROPERTY_X86_FEATURE_1_SHSTK is set on interpreter. a. If GNU_PROPERTY_X86_FEATURE_1_SHSTK isn't set on the executable or any shared objects loaded via the DT_NEEDED tag, disable SHSTK. b. Otherwise lock SHSTK. 3. After SHSTK is enabled, it is an error to load a shared object without GNU_PROPERTY_X86_FEATURE_1_SHSTK. To enable CET support in glibc, --enable-cet is required to configure glibc. When CET is enabled, both compiler and assembler must support CET. Otherwise, it is a configure-time error. To support CET run-time control, 1. _dl_x86_feature_1 is added to the writable ld.so namespace to indicate if IBT or SHSTK are enabled at run-time. It should be initialized by init_cpu_features. 2. For dynamic executables: a. A l_cet field is added to struct link_map to indicate if IBT or SHSTK is enabled in an ELF module. _dl_process_pt_note or _rtld_process_pt_note is called to process PT_NOTE segment for GNU program property and set l_cet. b. _dl_open_check is added to check IBT and SHSTK compatibilty when dlopening a shared object. 3. Replace i386 _dl_runtime_resolve and _dl_runtime_profile with _dl_runtime_resolve_shstk and _dl_runtime_profile_shstk, respectively if SHSTK is enabled. CET run-time control can be changed via GLIBC_TUNABLES with $ export GLIBC_TUNABLES=glibc.tune.x86_shstk=[permissive|on|off] $ export GLIBC_TUNABLES=glibc.tune.x86_ibt=[permissive|on|off] 1. permissive: SHSTK is disabled when dlopening a legacy ELF module. 2. on: IBT or SHSTK are always enabled, regardless if there are IBT or SHSTK bits in GNU program property. 3. off: IBT or SHSTK are always disabled, regardless if there are IBT or SHSTK bits in GNU program property. <cet.h> from CET-enabled GCC is automatically included by assembly codes to add GNU_PROPERTY_X86_FEATURE_1_IBT and GNU_PROPERTY_X86_FEATURE_1_SHSTK to GNU program property. _CET_ENDBR is added at the entrance of all assembly functions whose address may be taken. _CET_NOTRACK is used to insert NOTRACK prefix with indirect jump table to support IBT. It is defined as notrack when _CET_NOTRACK is defined in <cet.h>. [BZ #21598] * configure.ac: Add --enable-cet. * configure: Regenerated. * elf/Makefille (all-built-dso): Add a comment. * elf/dl-load.c (filebuf): Moved before "dynamic-link.h". Include <dl-prop.h>. (_dl_map_object_from_fd): Call _dl_process_pt_note on PT_NOTE segment. * elf/dl-open.c: Include <dl-prop.h>. (dl_open_worker): Call _dl_open_check. * elf/rtld.c: Include <dl-prop.h>. (dl_main): Call _rtld_process_pt_note on PT_NOTE segment. Call _rtld_main_check. * sysdeps/generic/dl-prop.h: New file. * sysdeps/i386/dl-cet.c: Likewise. * sysdeps/unix/sysv/linux/x86/cpu-features.c: Likewise. * sysdeps/unix/sysv/linux/x86/dl-cet.h: Likewise. * sysdeps/x86/cet-tunables.h: Likewise. * sysdeps/x86/check-cet.awk: Likewise. * sysdeps/x86/configure: Likewise. * sysdeps/x86/configure.ac: Likewise. * sysdeps/x86/dl-cet.c: Likewise. * sysdeps/x86/dl-procruntime.c: Likewise. * sysdeps/x86/dl-prop.h: Likewise. * sysdeps/x86/libc-start.h: Likewise. * sysdeps/x86/link_map.h: Likewise. * sysdeps/i386/dl-trampoline.S (_dl_runtime_resolve): Add _CET_ENDBR. (_dl_runtime_profile): Likewise. (_dl_runtime_resolve_shstk): New. (_dl_runtime_profile_shstk): Likewise. * sysdeps/linux/x86/Makefile (sysdep-dl-routines): Add dl-cet if CET is enabled. (CFLAGS-.o): Add -fcf-protection if CET is enabled. (CFLAGS-.os): Likewise. (CFLAGS-.op): Likewise. (CFLAGS-.oS): Likewise. (asm-CPPFLAGS): Add -fcf-protection -include cet.h if CET is enabled. (tests-special): Add $(objpfx)check-cet.out. (cet-built-dso): New. (+$(cet-built-dso:=.note)): Likewise. (common-generated): Add $(cet-built-dso:$(common-objpfx)%=%.note). ($(objpfx)check-cet.out): New. (generated): Add check-cet.out. * sysdeps/x86/cpu-features.c: Include <dl-cet.h> and <cet-tunables.h>. (TUNABLE_CALLBACK (set_x86_ibt)): New prototype. (TUNABLE_CALLBACK (set_x86_shstk)): Likewise. (init_cpu_features): Call get_cet_status to check CET status and update dl_x86_feature_1 with CET status. Call TUNABLE_CALLBACK (set_x86_ibt) and TUNABLE_CALLBACK (set_x86_shstk). Disable and lock CET in libc.a. * sysdeps/x86/cpu-tunables.c: Include <cet-tunables.h>. (TUNABLE_CALLBACK (set_x86_ibt)): New function. (TUNABLE_CALLBACK (set_x86_shstk)): Likewise. * sysdeps/x86/sysdep.h (_CET_NOTRACK): New. (_CET_ENDBR): Define if not defined. (ENTRY): Add _CET_ENDBR. * sysdeps/x86/dl-tunables.list (glibc.tune): Add x86_ibt and x86_shstk. * sysdeps/x86_64/dl-trampoline.h (_dl_runtime_resolve): Add _CET_ENDBR. (_dl_runtime_profile): Likewise.
2018-07-16 21:08:15 +00:00
# Check if assembler supports CET.
AC_CACHE_CHECK(whether $AS supports CET,
libc_cv_x86_cet_as, [dnl
cat > conftest.s <<EOF
incsspd %ecx
EOF
if AC_TRY_COMMAND(${CC-cc} -c $CFLAGS conftest.s -o conftest.o 1>&AS_MESSAGE_LOG_FD); then
libc_cv_x86_cet_as=yes
else
libc_cv_x86_cet_as=no
fi
rm -rf conftest*])
if test $libc_cv_x86_cet_as = no; then
AC_MSG_ERROR([$AS doesn't support CET])
fi
fi
if test $enable_cet = yes; then
AC_DEFINE(DEFAULT_DL_X86_CET_CONTROL, cet_elf_property)
elif test $enable_cet = permissive; then
AC_DEFINE(DEFAULT_DL_X86_CET_CONTROL, cet_permissive)
fi
x86: Support IBT and SHSTK in Intel CET [BZ #21598] Intel Control-flow Enforcement Technology (CET) instructions: https://software.intel.com/sites/default/files/managed/4d/2a/control-flow-en forcement-technology-preview.pdf includes Indirect Branch Tracking (IBT) and Shadow Stack (SHSTK). GNU_PROPERTY_X86_FEATURE_1_IBT is added to GNU program property to indicate that all executable sections are compatible with IBT when ENDBR instruction starts each valid target where an indirect branch instruction can land. Linker sets GNU_PROPERTY_X86_FEATURE_1_IBT on output only if it is set on all relocatable inputs. On an IBT capable processor, the following steps should be taken: 1. When loading an executable without an interpreter, enable IBT and lock IBT if GNU_PROPERTY_X86_FEATURE_1_IBT is set on the executable. 2. When loading an executable with an interpreter, enable IBT if GNU_PROPERTY_X86_FEATURE_1_IBT is set on the interpreter. a. If GNU_PROPERTY_X86_FEATURE_1_IBT isn't set on the executable, disable IBT. b. Lock IBT. 3. If IBT is enabled, when loading a shared object without GNU_PROPERTY_X86_FEATURE_1_IBT: a. If legacy interwork is allowed, then mark all pages in executable PT_LOAD segments in legacy code page bitmap. Failure of legacy code page bitmap allocation causes an error. b. If legacy interwork isn't allowed, it causes an error. GNU_PROPERTY_X86_FEATURE_1_SHSTK is added to GNU program property to indicate that all executable sections are compatible with SHSTK where return address popped from shadow stack always matches return address popped from normal stack. Linker sets GNU_PROPERTY_X86_FEATURE_1_SHSTK on output only if it is set on all relocatable inputs. On a SHSTK capable processor, the following steps should be taken: 1. When loading an executable without an interpreter, enable SHSTK if GNU_PROPERTY_X86_FEATURE_1_SHSTK is set on the executable. 2. When loading an executable with an interpreter, enable SHSTK if GNU_PROPERTY_X86_FEATURE_1_SHSTK is set on interpreter. a. If GNU_PROPERTY_X86_FEATURE_1_SHSTK isn't set on the executable or any shared objects loaded via the DT_NEEDED tag, disable SHSTK. b. Otherwise lock SHSTK. 3. After SHSTK is enabled, it is an error to load a shared object without GNU_PROPERTY_X86_FEATURE_1_SHSTK. To enable CET support in glibc, --enable-cet is required to configure glibc. When CET is enabled, both compiler and assembler must support CET. Otherwise, it is a configure-time error. To support CET run-time control, 1. _dl_x86_feature_1 is added to the writable ld.so namespace to indicate if IBT or SHSTK are enabled at run-time. It should be initialized by init_cpu_features. 2. For dynamic executables: a. A l_cet field is added to struct link_map to indicate if IBT or SHSTK is enabled in an ELF module. _dl_process_pt_note or _rtld_process_pt_note is called to process PT_NOTE segment for GNU program property and set l_cet. b. _dl_open_check is added to check IBT and SHSTK compatibilty when dlopening a shared object. 3. Replace i386 _dl_runtime_resolve and _dl_runtime_profile with _dl_runtime_resolve_shstk and _dl_runtime_profile_shstk, respectively if SHSTK is enabled. CET run-time control can be changed via GLIBC_TUNABLES with $ export GLIBC_TUNABLES=glibc.tune.x86_shstk=[permissive|on|off] $ export GLIBC_TUNABLES=glibc.tune.x86_ibt=[permissive|on|off] 1. permissive: SHSTK is disabled when dlopening a legacy ELF module. 2. on: IBT or SHSTK are always enabled, regardless if there are IBT or SHSTK bits in GNU program property. 3. off: IBT or SHSTK are always disabled, regardless if there are IBT or SHSTK bits in GNU program property. <cet.h> from CET-enabled GCC is automatically included by assembly codes to add GNU_PROPERTY_X86_FEATURE_1_IBT and GNU_PROPERTY_X86_FEATURE_1_SHSTK to GNU program property. _CET_ENDBR is added at the entrance of all assembly functions whose address may be taken. _CET_NOTRACK is used to insert NOTRACK prefix with indirect jump table to support IBT. It is defined as notrack when _CET_NOTRACK is defined in <cet.h>. [BZ #21598] * configure.ac: Add --enable-cet. * configure: Regenerated. * elf/Makefille (all-built-dso): Add a comment. * elf/dl-load.c (filebuf): Moved before "dynamic-link.h". Include <dl-prop.h>. (_dl_map_object_from_fd): Call _dl_process_pt_note on PT_NOTE segment. * elf/dl-open.c: Include <dl-prop.h>. (dl_open_worker): Call _dl_open_check. * elf/rtld.c: Include <dl-prop.h>. (dl_main): Call _rtld_process_pt_note on PT_NOTE segment. Call _rtld_main_check. * sysdeps/generic/dl-prop.h: New file. * sysdeps/i386/dl-cet.c: Likewise. * sysdeps/unix/sysv/linux/x86/cpu-features.c: Likewise. * sysdeps/unix/sysv/linux/x86/dl-cet.h: Likewise. * sysdeps/x86/cet-tunables.h: Likewise. * sysdeps/x86/check-cet.awk: Likewise. * sysdeps/x86/configure: Likewise. * sysdeps/x86/configure.ac: Likewise. * sysdeps/x86/dl-cet.c: Likewise. * sysdeps/x86/dl-procruntime.c: Likewise. * sysdeps/x86/dl-prop.h: Likewise. * sysdeps/x86/libc-start.h: Likewise. * sysdeps/x86/link_map.h: Likewise. * sysdeps/i386/dl-trampoline.S (_dl_runtime_resolve): Add _CET_ENDBR. (_dl_runtime_profile): Likewise. (_dl_runtime_resolve_shstk): New. (_dl_runtime_profile_shstk): Likewise. * sysdeps/linux/x86/Makefile (sysdep-dl-routines): Add dl-cet if CET is enabled. (CFLAGS-.o): Add -fcf-protection if CET is enabled. (CFLAGS-.os): Likewise. (CFLAGS-.op): Likewise. (CFLAGS-.oS): Likewise. (asm-CPPFLAGS): Add -fcf-protection -include cet.h if CET is enabled. (tests-special): Add $(objpfx)check-cet.out. (cet-built-dso): New. (+$(cet-built-dso:=.note)): Likewise. (common-generated): Add $(cet-built-dso:$(common-objpfx)%=%.note). ($(objpfx)check-cet.out): New. (generated): Add check-cet.out. * sysdeps/x86/cpu-features.c: Include <dl-cet.h> and <cet-tunables.h>. (TUNABLE_CALLBACK (set_x86_ibt)): New prototype. (TUNABLE_CALLBACK (set_x86_shstk)): Likewise. (init_cpu_features): Call get_cet_status to check CET status and update dl_x86_feature_1 with CET status. Call TUNABLE_CALLBACK (set_x86_ibt) and TUNABLE_CALLBACK (set_x86_shstk). Disable and lock CET in libc.a. * sysdeps/x86/cpu-tunables.c: Include <cet-tunables.h>. (TUNABLE_CALLBACK (set_x86_ibt)): New function. (TUNABLE_CALLBACK (set_x86_shstk)): Likewise. * sysdeps/x86/sysdep.h (_CET_NOTRACK): New. (_CET_ENDBR): Define if not defined. (ENTRY): Add _CET_ENDBR. * sysdeps/x86/dl-tunables.list (glibc.tune): Add x86_ibt and x86_shstk. * sysdeps/x86_64/dl-trampoline.h (_dl_runtime_resolve): Add _CET_ENDBR. (_dl_runtime_profile): Likewise.
2018-07-16 21:08:15 +00:00
LIBC_CONFIG_VAR([enable-cet], [$enable_cet])
x86: Support GNU_PROPERTY_X86_ISA_1_V[234] marker [BZ #26717] GCC 11 supports -march=x86-64-v[234] to enable x86 micro-architecture ISA levels: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=97250 and -mneeded to emit GNU_PROPERTY_X86_ISA_1_NEEDED property with GNU_PROPERTY_X86_ISA_1_V[234] marker: https://gitlab.com/x86-psABIs/x86-64-ABI/-/merge_requests/13 Binutils support for GNU_PROPERTY_X86_ISA_1_V[234] marker were added by commit b0ab06937385e0ae25cebf1991787d64f439bf12 Author: H.J. Lu <hjl.tools@gmail.com> Date: Fri Oct 30 06:49:57 2020 -0700 x86: Support GNU_PROPERTY_X86_ISA_1_BASELINE marker and commit 32930e4edbc06bc6f10c435dbcc63131715df678 Author: H.J. Lu <hjl.tools@gmail.com> Date: Fri Oct 9 05:05:57 2020 -0700 x86: Support GNU_PROPERTY_X86_ISA_1_V[234] marker GNU_PROPERTY_X86_ISA_1_NEEDED property in x86 ELF binaries indicate the micro-architecture ISA level required to execute the binary. The marker must be added by programmers explicitly in one of 3 ways: 1. Pass -mneeded to GCC. 2. Add the marker in the linker inputs as this patch does. 3. Pass -z x86-64-v[234] to the linker. Add GNU_PROPERTY_X86_ISA_1_BASELINE and GNU_PROPERTY_X86_ISA_1_V[234] marker support to ld.so if binutils 2.32 or newer is used to build glibc: 1. Add GNU_PROPERTY_X86_ISA_1_BASELINE and GNU_PROPERTY_X86_ISA_1_V[234] markers to elf.h. 2. Add GNU_PROPERTY_X86_ISA_1_BASELINE and GNU_PROPERTY_X86_ISA_1_V[234] marker to abi-note.o based on the ISA level used to compile abi-note.o, assuming that the same ISA level is used to compile the whole glibc. 3. Add isa_1 to cpu_features to record the supported x86 ISA level. 4. Rename _dl_process_cet_property_note to _dl_process_property_note and add GNU_PROPERTY_X86_ISA_1_V[234] marker detection. 5. Update _rtld_main_check and _dl_open_check to check loaded objects with the incompatible ISA level. 6. Add a testcase to verify that dlopen an x86-64-v4 shared object fails on lesser platforms. 7. Use <get-isa-level.h> in dl-hwcaps-subdirs.c and tst-glibc-hwcaps.c. Tested under i686, x32 and x86-64 modes on x86-64-v2, x86-64-v3 and x86-64-v4 machines. Marked elf/tst-isa-level-1 with x86-64-v4, ran it on x86-64-v3 machine and got: [hjl@gnu-cfl-2 build-x86_64-linux]$ ./elf/tst-isa-level-1 ./elf/tst-isa-level-1: CPU ISA level is lower than required [hjl@gnu-cfl-2 build-x86_64-linux]$
2020-10-09 13:06:56 +00:00
# Check if linker supports x86 ISA level.
AC_CACHE_CHECK([for linker x86 ISA level support],
libc_cv_include_x86_isa_level, [dnl
cat > conftest1.S <<EOF
#ifdef __LP64__
# define P2ALIGN 3
#else
# define P2ALIGN 2
#endif
.section ".note.gnu.property", "a"
.p2align P2ALIGN
.long 1f - 0f /* name length. */
.long 4f - 1f /* data length. */
/* NT_GNU_PROPERTY_TYPE_0 */
.long 5 /* note type. */
0:
.asciz "GNU" /* vendor name. */
1:
.p2align P2ALIGN
/* GNU_PROPERTY_X86_ISA_1_NEEDED */
.long 0xc0008002 /* pr_type. */
.long 3f - 2f /* pr_datasz. */
2:
.long 0x1
3:
.p2align P2ALIGN
4:
EOF
cat > conftest2.S <<EOF
#ifdef __LP64__
# define P2ALIGN 3
#else
# define P2ALIGN 2
#endif
.section ".note.gnu.property", "a"
.p2align P2ALIGN
.long 1f - 0f /* name length. */
.long 4f - 1f /* data length. */
/* NT_GNU_PROPERTY_TYPE_0 */
.long 5 /* note type. */
0:
.asciz "GNU" /* vendor name. */
1:
.p2align P2ALIGN
/* GNU_PROPERTY_X86_ISA_1_NEEDED */
.long 0xc0008002 /* pr_type. */
.long 3f - 2f /* pr_datasz. */
2:
.long 0x2
3:
.p2align P2ALIGN
4:
EOF
libc_cv_include_x86_isa_level=no
if AC_TRY_COMMAND(${CC-cc} $CFLAGS $CPPFLAGS -nostartfiles -nostdlib -r -o conftest conftest1.S conftest2.S); then
count=`LC_ALL=C $READELF -n conftest | grep NT_GNU_PROPERTY_TYPE_0 | wc -l`
if test "$count" = 1; then
libc_cv_include_x86_isa_level=yes
fi
fi
rm -f conftest*])
if test $libc_cv_include_x86_isa_level = yes; then
AC_DEFINE(INCLUDE_X86_ISA_LEVEL)
AC_CACHE_CHECK([for LAHF/SAHF instruction support],
libc_cv_have_x86_lahf_sahf, [dnl
libc_cv_have_x86_lahf_sahf=no
if AC_TRY_COMMAND(${CC-cc} $CFLAGS $CPPFLAGS -fverbose-asm -S -o - -x c /dev/null) | grep -qE '(-msahf\b|-march=x86-64-v)'; then
libc_cv_have_x86_lahf_sahf=yes
fi])
if test $libc_cv_have_x86_lahf_sahf = yes; then
AC_DEFINE(HAVE_X86_LAHF_SAHF)
fi
AC_CACHE_CHECK([for MOVBE instruction support],
libc_cv_have_x86_movbe, [dnl
libc_cv_have_x86_movbe=no
if AC_TRY_COMMAND(${CC-cc} $CFLAGS $CPPFLAGS -fverbose-asm -S -o - -x c /dev/null) | grep -qE '(-mmovbe\b|-march=x86-64-v(@<:@3-9@:>@|@<:@1-9@:>@@<:@0-9@:>@))'; then
libc_cv_have_x86_movbe=yes
fi])
if test $libc_cv_have_x86_movbe = yes; then
AC_DEFINE(HAVE_X86_MOVBE)
fi
fi
x86: Support GNU_PROPERTY_X86_ISA_1_V[234] marker [BZ #26717] GCC 11 supports -march=x86-64-v[234] to enable x86 micro-architecture ISA levels: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=97250 and -mneeded to emit GNU_PROPERTY_X86_ISA_1_NEEDED property with GNU_PROPERTY_X86_ISA_1_V[234] marker: https://gitlab.com/x86-psABIs/x86-64-ABI/-/merge_requests/13 Binutils support for GNU_PROPERTY_X86_ISA_1_V[234] marker were added by commit b0ab06937385e0ae25cebf1991787d64f439bf12 Author: H.J. Lu <hjl.tools@gmail.com> Date: Fri Oct 30 06:49:57 2020 -0700 x86: Support GNU_PROPERTY_X86_ISA_1_BASELINE marker and commit 32930e4edbc06bc6f10c435dbcc63131715df678 Author: H.J. Lu <hjl.tools@gmail.com> Date: Fri Oct 9 05:05:57 2020 -0700 x86: Support GNU_PROPERTY_X86_ISA_1_V[234] marker GNU_PROPERTY_X86_ISA_1_NEEDED property in x86 ELF binaries indicate the micro-architecture ISA level required to execute the binary. The marker must be added by programmers explicitly in one of 3 ways: 1. Pass -mneeded to GCC. 2. Add the marker in the linker inputs as this patch does. 3. Pass -z x86-64-v[234] to the linker. Add GNU_PROPERTY_X86_ISA_1_BASELINE and GNU_PROPERTY_X86_ISA_1_V[234] marker support to ld.so if binutils 2.32 or newer is used to build glibc: 1. Add GNU_PROPERTY_X86_ISA_1_BASELINE and GNU_PROPERTY_X86_ISA_1_V[234] markers to elf.h. 2. Add GNU_PROPERTY_X86_ISA_1_BASELINE and GNU_PROPERTY_X86_ISA_1_V[234] marker to abi-note.o based on the ISA level used to compile abi-note.o, assuming that the same ISA level is used to compile the whole glibc. 3. Add isa_1 to cpu_features to record the supported x86 ISA level. 4. Rename _dl_process_cet_property_note to _dl_process_property_note and add GNU_PROPERTY_X86_ISA_1_V[234] marker detection. 5. Update _rtld_main_check and _dl_open_check to check loaded objects with the incompatible ISA level. 6. Add a testcase to verify that dlopen an x86-64-v4 shared object fails on lesser platforms. 7. Use <get-isa-level.h> in dl-hwcaps-subdirs.c and tst-glibc-hwcaps.c. Tested under i686, x32 and x86-64 modes on x86-64-v2, x86-64-v3 and x86-64-v4 machines. Marked elf/tst-isa-level-1 with x86-64-v4, ran it on x86-64-v3 machine and got: [hjl@gnu-cfl-2 build-x86_64-linux]$ ./elf/tst-isa-level-1 ./elf/tst-isa-level-1: CPU ISA level is lower than required [hjl@gnu-cfl-2 build-x86_64-linux]$
2020-10-09 13:06:56 +00:00
LIBC_CONFIG_VAR([enable-x86-isa-level], [$libc_cv_include_x86_isa_level])