glibc/math/gen-auto-libm-tests.c

2317 lines
72 KiB
C
Raw Normal View History

/* Generate expected output for libm tests with MPFR and MPC.
Copyright (C) 2013-2019 Free Software Foundation, Inc.
This file is part of the GNU C Library.
The GNU C Library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version.
The GNU C Library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public
License along with the GNU C Library; if not, see
<http://www.gnu.org/licenses/>. */
/* Compile this program as:
gcc -std=gnu11 -O2 -Wall -Wextra gen-auto-libm-tests.c -lmpc -lmpfr -lgmp \
-o gen-auto-libm-tests
(use of current MPC and MPFR versions recommended) and run it as:
Split auto-libm-test-out by function. math/auto-libm-test-out is, at over 30 MB, by far the largest file in the glibc source tree. This patch splits it by function, so reducing it to auto-libm-test-out-<func> files that are all under 5 MB in size. This is preliminary to splitting up libm-test.inc as well so that each function's tests can also be processed separately by gen-libm-test.pl. As a preliminary patch it doesn't actually implement that step; rather, all the separate files get concatenated by the Makefile to produce the monolithic auto-libm-test-out file again as an input to gen-libm-test.pl. (The concatentation is identical to the file in the source tree before this patch.) Even this preliminary step, however, is of use independent of splitting up libm-test.inc: some tests for csin and csinh have not been moved to auto-libm-test-in because they result in auto-libm-test-out generation taking several minutes rather than a few seconds (all released MPC versions are very slow for certain sin / sinh inputs; there are some old improvements in MPC mainline which should eventually become MPC 1.1, but the complex inverse trig and hyperbolic functions are slow even in MPC mainline and have yet to be moved to auto-libm-test-in at all), and it seems much more reasonable to add such inputs to auto-libm-test-in when it will only slow down regeneration for particular functions than when it will slow down regeneration globally. gen-auto-libm-tests still parses the whole input file, but only generates output for the requested function. This ensures bad syntax in the file is always detected, and parsing the whole file is quick; it's output generation that is comparatively slow for some functions. Tested for x86_64. * math/gen-auto-libm-tests.c: Update comment about use of program. (generate_output): Add argument FUNCTION. (main): Require extra argument. Pass function name to generate_output. * math/Makefile (generated): Add auto-libm-test-out. (libm-test-funcs-auto): New variable. (auto-libm-test-out-files): New variable. ($(objpfx)libm-test.c): Depend on $(auto-libm-test-out-files). Concatenate those files to form $(objpfx)auto-libm-test-out and use it as input to gen-libm-test.pl. * math/README.libm-test: Update. * math/auto-libm-test-out: Remove. * math/auto-libm-test-out-acos: New generated file. * math/auto-libm-test-out-acosh: Likewise. * math/auto-libm-test-out-asin: Likewise. * math/auto-libm-test-out-asinh: Likewise. * math/auto-libm-test-out-atan: Likewise. * math/auto-libm-test-out-atan2: Likewise. * math/auto-libm-test-out-atanh: Likewise. * math/auto-libm-test-out-cabs: Likewise. * math/auto-libm-test-out-carg: Likewise. * math/auto-libm-test-out-cbrt: Likewise. * math/auto-libm-test-out-ccos: Likewise. * math/auto-libm-test-out-ccosh: Likewise. * math/auto-libm-test-out-cexp: Likewise. * math/auto-libm-test-out-clog: Likewise. * math/auto-libm-test-out-clog10: Likewise. * math/auto-libm-test-out-cos: Likewise. * math/auto-libm-test-out-cosh: Likewise. * math/auto-libm-test-out-cpow: Likewise. * math/auto-libm-test-out-csin: Likewise. * math/auto-libm-test-out-csinh: Likewise. * math/auto-libm-test-out-csqrt: Likewise. * math/auto-libm-test-out-ctan: Likewise. * math/auto-libm-test-out-ctanh: Likewise. * math/auto-libm-test-out-erf: Likewise. * math/auto-libm-test-out-erfc: Likewise. * math/auto-libm-test-out-exp: Likewise. * math/auto-libm-test-out-exp10: Likewise. * math/auto-libm-test-out-exp2: Likewise. * math/auto-libm-test-out-expm1: Likewise. * math/auto-libm-test-out-fma: Likewise. * math/auto-libm-test-out-hypot: Likewise. * math/auto-libm-test-out-j0: Likewise. * math/auto-libm-test-out-j1: Likewise. * math/auto-libm-test-out-jn: Likewise. * math/auto-libm-test-out-lgamma: Likewise. * math/auto-libm-test-out-log: Likewise. * math/auto-libm-test-out-log10: Likewise. * math/auto-libm-test-out-log1p: Likewise. * math/auto-libm-test-out-log2: Likewise. * math/auto-libm-test-out-pow: Likewise. * math/auto-libm-test-out-sin: Likewise. * math/auto-libm-test-out-sincos: Likewise. * math/auto-libm-test-out-sinh: Likewise. * math/auto-libm-test-out-sqrt: Likewise. * math/auto-libm-test-out-tan: Likewise. * math/auto-libm-test-out-tanh: Likewise. * math/auto-libm-test-out-tgamma: Likewise. * math/auto-libm-test-out-y0: Likewise. * math/auto-libm-test-out-y1: Likewise. * math/auto-libm-test-out-yn: Likewise.
2017-02-06 18:41:20 +00:00
gen-auto-libm-tests auto-libm-test-in <func> auto-libm-test-out-<func>
Add test infrastructure for narrowing libm functions. This patch continues preparations for adding TS 18661-1 narrowing libm functions by adding the required testsuite infrastructure to test such functions through the libm-test infrastructure. That infrastructure is based around testing for a single type, FLOAT. For the narrowing functions, FLOAT, the "main" type for testing, is the function return type; the argument type is ARG_FLOAT. This is consistent with how the code built once for each type, libm-test-support.c, depends on FLOAT for such things as calculating ulps errors in results but can already handle different argument types (pointers, integers, long double for nexttoward). Makefile machinery is added to handle building tests for all pairs of types for which there are narrowing functions (as with non-narrowing functions, aliases are tested just the same as the functions they alias). gen-auto-libm-tests gains a --narrow option for building outputs for narrowing functions (so narrowing sqrt and fma will share the same inputs as non-narrowing, but gen-auto-libm-tests will be run with and without that option to generate different output files). In the narrowing case, the auto-libm-test-out-narrow-* files include annotations for each test about what properties ARG_FLOAT must have to be able to represent all the inputs for that test; those annotations result in calls to the TEST_COND_arg_fmt macro. gen-libm-test.pl has some minor updates to handle narrowing tests (for example, arguments in such tests must be surrounded by ARG_LIT calls instead of LIT calls). Various new macros are added to the C test support code (for example, sNaN initializers need to be properly typed, so arg_snan_value is added; other such arg_* macros are added as it seems cleanest to do so, though some are not strictly required). Special-casing of the ibm128 format to allow for its limitations is adjusted to handle it as the argument format as well as as the result format; thus, the tests of the new functions allow nonzero ulps only in the case where ibm128 is the argument format, as otherwise the functions correspond to fully-defined IEEE operations. The ulps in question appear as e.g. 'Function: "add_ldouble"' in libm-test-ulps (with 1ulp errors then listed for double and float for that function in powerpc); no support is added to generate corresponding faddl / daddl ulps listings in the ulps table in the manual. For the previous patch, I noted the need to avoid spurious macro expansions of identifiers such as "add". A test test-narrow-macros.c is added to verify such macro expansions are successfully avoided, and there is also a -mlong-double-64 version of that test for ldbl-opt. This test is set up to cover the full set of relevant identifiers from the start rather than adding functions one at a time as each function group is added. Tested for x86_64 (this patch in isolation, as well as testing for various configurations in conjunction with the actual addition of "add" functions). * math/Makefile (test-type-pairs): New variable. (test-type-pairs-f64xf128-yes): Likewise. (tests): Add test-narrow-macros. (libm-test-funcs-narrow): New variable. (libm-test-c-narrow): Likewise. (generated): Add $(libm-test-c-narrow). (libm-tests-base-narrow): New variable. (libm-tests-narrow): Likewise. (libm-tests): Add $(libm-tests-narrow). (libm-tests-for-type): Handle $(libm-tests-narrow). (libm-test-c-narrow-obj): New variable. ($(libm-test-c-narrow-obj)): New rule. ($(foreach t,$(libm-tests-narrow),$(objpfx)$(t).c)): Likewise. ($(foreach f,$(libm-test-funcs-narrow),$(objpfx)$(o)-$(f).o)): Use $(o-iterator) to set dependencies and CFLAGS. * math/gen-auto-libm-tests.c: Document use for narrowing functions. (output_for_one_input_case): Take argument NARROW. (generate_output): Likewise. Update call to output_for_one_input_case. (main): Take --narrow option. Update call to generate_output. * math/gen-libm-test.pl (_apply_lit): Take macro name as argument. (apply_lit): Update call to _apply_lit. (apply_arglit): New function. (parse_args): Handle "a" arguments. (parse_auto_input): Handle format names using ":". * math/README.libm-test: Document "a" parameter type. * math/libm-test-support.h (ARG_TYPE_MIN): New macro. (ARG_TYPE_TRUE_MIN): Likewise. (ARG_TYPE_MAX): Likwise. (ARG_MIN_EXP): Likewise. (ARG_MAX_EXP): Likewise. (ARG_MANT_DIG): Likewise. (TEST_COND_arg_ibm128): Likewise. (TEST_COND_ibm128_libgcc): Define conditional on [ARG_FLOAT]. (TEST_COND_arg_fmt): New macro. (init_max_error): Update prototype. * math/libm-test-support.c (test_ibm128): New variable. (init_max_error): Take argument testing_ibm128 and set test_ibm128 instead of using [TEST_COND_ibm128] conditional. (test_exceptions): Use test_ibm128 instead of TEST_COND_ibm128. * math/libm-test-driver.c (STR_ARG_FLOAT): New macro. [TEST_NARROW] (TEST_MSG): New definition. (arg_plus_zero): New macro. (arg_minus_zero): Likewise. (arg_plus_infty): Likewise. (arg_minus_infty): Likewise. (arg_qnan_value_pl): Likewise. (arg_qnan_value): Likewise. (arg_snan_value_pl): Likewise. (arg_snan_value): Likewise. (arg_max_value): Likewise. (arg_min_value): Likewise. (arg_min_subnorm_value): Likewise. [ARG_FLOAT] (struct test_aa_f_data): New struct type. (RUN_TEST_LOOP_aa_f): New macro. (TEST_SUFF): New macro. (TEST_SUFF_STR): Likewise. [!TEST_MATHVEC] (VEC_SUFF): Don't define. (TEST_COND_any_ibm128): New macro. (START): Use TEST_SUFF and TEST_SUFF_STR in initializer for this_func. Update call to init_max_error. * math/test-double.h (FUNC_NARROW_PREFIX): New macro. * math/test-float.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float128.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float32.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float32x.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float64.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float64x.h (FUNC_NARROW_PREFIX): Likewise. * math/test-math-scalar.h (TEST_NARROW): Likewise. * math/test-math-vector.h (TEST_NARROW): Likewise. * math/test-arg-double.h: New file. * math/test-arg-float128.h: Likewise. * math/test-arg-float32x.h: Likewise. * math/test-arg-float64.h: Likewise. * math/test-arg-float64x.h: Likewise. * math/test-arg-ldouble.h: Likewise. * math/test-math-narrow.h: Likewise. * math/test-narrow-macros.c: Likewise. * sysdeps/ieee754/ldbl-opt/test-narrow-macros-ldbl-64.c: Likewise. * sysdeps/ieee754/ldbl-opt/Makefile (tests): Add test-narrow-macros-ldbl-64. (CFLAGS-test-narrow-macros-ldbl-64.c): New variable.
2018-02-09 21:55:48 +00:00
to generate results for normal libm functions, or
gen-auto-libm-tests --narrow auto-libm-test-in <func> \
auto-libm-test-out-narrow-<func>
to generate results for a function rounding results to a narrower
type (in the case of fma and sqrt, both output files are generated
from the same test inputs).
The input file auto-libm-test-in contains three kinds of lines:
Lines beginning with "#" are comments, and are ignored, as are
empty lines.
Other lines are test lines, of the form "function input1 input2
... [flag1 flag2 ...]". Inputs are either finite real numbers or
integers, depending on the function under test. Real numbers may
be in any form acceptable to mpfr_strtofr (base 0); integers in any
form acceptable to mpz_set_str (base 0). In addition, real numbers
may be certain special strings such as "pi", as listed in the
special_real_inputs array.
Each flag is a flag name possibly followed by a series of
":condition". Conditions may be any of the names of floating-point
formats in the floating_point_formats array, "long32" and "long64"
to indicate the number of bits in the "long" type, or other strings
for which libm-test.inc defines a TEST_COND_<condition> macro (with
"-"- changed to "_" in the condition name) evaluating to nonzero
when the condition is true and zero when the condition is false.
The meaning is that the flag applies to the test if all the listed
conditions are true. "flag:cond1:cond2 flag:cond3:cond4" means the
flag applies if ((cond1 && cond2) || (cond3 && cond4)).
A real number specified as an input is considered to represent the
set of real numbers arising from rounding the given number in any
direction for any supported floating-point format; any roundings
that give infinity are ignored. Each input on a test line has all
the possible roundings considered independently. Each resulting
choice of the tuple of inputs to the function is ignored if the
mathematical result of the function involves a NaN or an exact
infinity, and is otherwise considered for each floating-point
format for which all those inputs are exactly representable. Thus
tests may result in "overflow", "underflow" and "inexact"
exceptions; "invalid" may arise only when the final result type is
an integer type and it is the conversion of a mathematically
defined finite result to integer type that results in that
exception.
By default, it is assumed that "overflow" and "underflow"
exceptions should be correct, but that "inexact" exceptions should
only be correct for functions listed as exactly determined. For
such functions, "underflow" exceptions should respect whether the
machine has before-rounding or after-rounding tininess detection.
For other functions, it is considered that if the exact result is
somewhere between the greatest magnitude subnormal of a given sign
(exclusive) and the least magnitude normal of that sign
(inclusive), underflow exceptions are permitted but optional on all
machines, and they are also permitted but optional for smaller
subnormal exact results for functions that are not exactly
determined. errno setting is expected for overflow to infinity and
underflow to zero (for real functions), and for out-of-range
conversion of a finite result to integer type, and is considered
permitted but optional for all other cases where overflow
exceptions occur, and where underflow exceptions occur or are
permitted. In other cases (where no overflow or underflow is
permitted), errno is expected to be left unchanged.
The flag "no-test-inline" indicates a test is disabled for inline
Test cpow in all rounding modes. This patch enables testing of cpow in all rounding modes using ALL_RM_TEST. There were two reasons this was previously deferred: * MPC has complicated rounding-mode-dependent rules for the signs of exact zero real or imaginary parts in the result of mpc_pow. Annex G does not impose any such requirements and I don't think glibc should try to implement any particular logic here. This patch adds support for gen-auto-libm-tests passing the IGNORE_ZERO_INF_SIGN flag to libm-test.inc. * Error accumulations in some tests in non-default rounding modes exceed the maximum error permitted in libm-test.inc. This patch marks the problem tests with xfail-rounding. (It might be possible to reduce the accumulations a bit by using round-to-nearest when cpow calls clog, but I don't think there's much point; the implementation approach for cpow is fundamentally deficient, as discussed in the existing bug for cpow inaccuracy which can reasonably be considered to cover these less-inaccurate cases as well. It's possible that the test "cpow 2 0 10 0" will also need xfail-rounding on some platforms.) Tested x86_64 and x86 and ulps updated accordingly. * math/gen-auto-libm-tests.c: Document use of ignore-zero-inf-sign. (input_flag_type): Add value flag_ignore_zero_inf_sign. (input_flags): Add ignore-zero-inf-sign. (output_for_one_input_case): Handle flag_ignore_zero_inf_sign. * math/gen-libm-test.pl (generate_testfile): Handle ignore-zero-inf-sign. * math/auto-libm-test-in: Mark some cpow tests with ignore-zero-inf-sign and some with xfail-rounding. * math/auto-libm-test-out: Regenerated. * math/libm-test.inc (cpow_test): Use ALL_RM_TEST. * sysdeps/i386/fpu/libm-test-ulps: Update. * sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
2014-06-23 20:15:14 +00:00
function testing; "ignore-zero-inf-sign" indicates the the signs of
zero and infinite results should be ignored; "xfail" indicates the
test is disabled as expected to produce incorrect results,
"xfail-rounding" indicates the test is disabled only in rounding
modes other than round-to-nearest. Otherwise, test flags are of
the form "spurious-<exception>" and "missing-<exception>", for any
exception ("overflow", "underflow", "inexact", "invalid",
"divbyzero"), "spurious-errno" and "missing-errno", to indicate
when tests are expected to deviate from the exception and errno
settings corresponding to the mathematical results. "xfail",
"xfail-rounding", "spurious-" and "missing-" flags should be
accompanied by a comment referring to an open bug in glibc
Bugzilla.
Split auto-libm-test-out by function. math/auto-libm-test-out is, at over 30 MB, by far the largest file in the glibc source tree. This patch splits it by function, so reducing it to auto-libm-test-out-<func> files that are all under 5 MB in size. This is preliminary to splitting up libm-test.inc as well so that each function's tests can also be processed separately by gen-libm-test.pl. As a preliminary patch it doesn't actually implement that step; rather, all the separate files get concatenated by the Makefile to produce the monolithic auto-libm-test-out file again as an input to gen-libm-test.pl. (The concatentation is identical to the file in the source tree before this patch.) Even this preliminary step, however, is of use independent of splitting up libm-test.inc: some tests for csin and csinh have not been moved to auto-libm-test-in because they result in auto-libm-test-out generation taking several minutes rather than a few seconds (all released MPC versions are very slow for certain sin / sinh inputs; there are some old improvements in MPC mainline which should eventually become MPC 1.1, but the complex inverse trig and hyperbolic functions are slow even in MPC mainline and have yet to be moved to auto-libm-test-in at all), and it seems much more reasonable to add such inputs to auto-libm-test-in when it will only slow down regeneration for particular functions than when it will slow down regeneration globally. gen-auto-libm-tests still parses the whole input file, but only generates output for the requested function. This ensures bad syntax in the file is always detected, and parsing the whole file is quick; it's output generation that is comparatively slow for some functions. Tested for x86_64. * math/gen-auto-libm-tests.c: Update comment about use of program. (generate_output): Add argument FUNCTION. (main): Require extra argument. Pass function name to generate_output. * math/Makefile (generated): Add auto-libm-test-out. (libm-test-funcs-auto): New variable. (auto-libm-test-out-files): New variable. ($(objpfx)libm-test.c): Depend on $(auto-libm-test-out-files). Concatenate those files to form $(objpfx)auto-libm-test-out and use it as input to gen-libm-test.pl. * math/README.libm-test: Update. * math/auto-libm-test-out: Remove. * math/auto-libm-test-out-acos: New generated file. * math/auto-libm-test-out-acosh: Likewise. * math/auto-libm-test-out-asin: Likewise. * math/auto-libm-test-out-asinh: Likewise. * math/auto-libm-test-out-atan: Likewise. * math/auto-libm-test-out-atan2: Likewise. * math/auto-libm-test-out-atanh: Likewise. * math/auto-libm-test-out-cabs: Likewise. * math/auto-libm-test-out-carg: Likewise. * math/auto-libm-test-out-cbrt: Likewise. * math/auto-libm-test-out-ccos: Likewise. * math/auto-libm-test-out-ccosh: Likewise. * math/auto-libm-test-out-cexp: Likewise. * math/auto-libm-test-out-clog: Likewise. * math/auto-libm-test-out-clog10: Likewise. * math/auto-libm-test-out-cos: Likewise. * math/auto-libm-test-out-cosh: Likewise. * math/auto-libm-test-out-cpow: Likewise. * math/auto-libm-test-out-csin: Likewise. * math/auto-libm-test-out-csinh: Likewise. * math/auto-libm-test-out-csqrt: Likewise. * math/auto-libm-test-out-ctan: Likewise. * math/auto-libm-test-out-ctanh: Likewise. * math/auto-libm-test-out-erf: Likewise. * math/auto-libm-test-out-erfc: Likewise. * math/auto-libm-test-out-exp: Likewise. * math/auto-libm-test-out-exp10: Likewise. * math/auto-libm-test-out-exp2: Likewise. * math/auto-libm-test-out-expm1: Likewise. * math/auto-libm-test-out-fma: Likewise. * math/auto-libm-test-out-hypot: Likewise. * math/auto-libm-test-out-j0: Likewise. * math/auto-libm-test-out-j1: Likewise. * math/auto-libm-test-out-jn: Likewise. * math/auto-libm-test-out-lgamma: Likewise. * math/auto-libm-test-out-log: Likewise. * math/auto-libm-test-out-log10: Likewise. * math/auto-libm-test-out-log1p: Likewise. * math/auto-libm-test-out-log2: Likewise. * math/auto-libm-test-out-pow: Likewise. * math/auto-libm-test-out-sin: Likewise. * math/auto-libm-test-out-sincos: Likewise. * math/auto-libm-test-out-sinh: Likewise. * math/auto-libm-test-out-sqrt: Likewise. * math/auto-libm-test-out-tan: Likewise. * math/auto-libm-test-out-tanh: Likewise. * math/auto-libm-test-out-tgamma: Likewise. * math/auto-libm-test-out-y0: Likewise. * math/auto-libm-test-out-y1: Likewise. * math/auto-libm-test-out-yn: Likewise.
2017-02-06 18:41:20 +00:00
The output file auto-libm-test-out-<func> contains the test lines from
auto-libm-test-in, and, after the line for a given test, some
number of output test lines. An output test line is of the form "=
function rounding-mode format input1 input2 ... : output1 output2
... : flags". rounding-mode is "tonearest", "towardzero", "upward"
or "downward". format is a name from the floating_point_formats
array, possibly followed by a sequence of ":flag" for flags from
Adjust how gen-auto-libm-tests handles before-rounding/after-rounding cases. This patch changes gen-auto-libm-tests so that, when generating test results that depend on whether the architecture has before-rounding or after-rounding tininess detection, the :before-rounding or :after-rounding conditions go on the exception / errno flags generated, rather than generating two separate lines in auto-libm-test-out for e.g. flt-32:before-rounding and flt-32:after-rounding. The rationale for this is as follows. It would be desirable for testing a libm function in all rounding modes to require just one function and array in libm-test.inc, not four (or five), with the array of test data including expected results for all rounding modes rather than separate arrays for each rounding mode that also need to repeat all the test inputs. For gen-libm-test.pl to generate data for such an array from auto-libm-test-out, it would be helpful if each (format, test input) pair has exactly four lines in auto-libm-test-out, one for each rounding mode, rather than some rounding modes having just one line and some having two because the exceptions depend on tininess detection. Tested x86_64 and x86. * math/gen-auto-libm-tests.c: Update comment on output format. (output_for_one_input_case): Generate before-rounding and after-rounding information as conditions on output flags not floating-point format. * math/auto-libm-test-out: Regenerated. * math/gen-libm-test.pl (cond_value): New function. (or_cond_value): Use cond_value. (generate_testfile): Handle conditional exceptions.
2014-03-06 14:11:19 +00:00
"long32" and "long64". Inputs and outputs are specified as hex
floats with the required suffix for the floating-point type, or
plus_infty or minus_infty for infinite expected results, or as
integer constant expressions (not necessarily with the right type)
or IGNORE for integer inputs and outputs. Flags are
Test cpow in all rounding modes. This patch enables testing of cpow in all rounding modes using ALL_RM_TEST. There were two reasons this was previously deferred: * MPC has complicated rounding-mode-dependent rules for the signs of exact zero real or imaginary parts in the result of mpc_pow. Annex G does not impose any such requirements and I don't think glibc should try to implement any particular logic here. This patch adds support for gen-auto-libm-tests passing the IGNORE_ZERO_INF_SIGN flag to libm-test.inc. * Error accumulations in some tests in non-default rounding modes exceed the maximum error permitted in libm-test.inc. This patch marks the problem tests with xfail-rounding. (It might be possible to reduce the accumulations a bit by using round-to-nearest when cpow calls clog, but I don't think there's much point; the implementation approach for cpow is fundamentally deficient, as discussed in the existing bug for cpow inaccuracy which can reasonably be considered to cover these less-inaccurate cases as well. It's possible that the test "cpow 2 0 10 0" will also need xfail-rounding on some platforms.) Tested x86_64 and x86 and ulps updated accordingly. * math/gen-auto-libm-tests.c: Document use of ignore-zero-inf-sign. (input_flag_type): Add value flag_ignore_zero_inf_sign. (input_flags): Add ignore-zero-inf-sign. (output_for_one_input_case): Handle flag_ignore_zero_inf_sign. * math/gen-libm-test.pl (generate_testfile): Handle ignore-zero-inf-sign. * math/auto-libm-test-in: Mark some cpow tests with ignore-zero-inf-sign and some with xfail-rounding. * math/auto-libm-test-out: Regenerated. * math/libm-test.inc (cpow_test): Use ALL_RM_TEST. * sysdeps/i386/fpu/libm-test-ulps: Update. * sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
2014-06-23 20:15:14 +00:00
"no-test-inline", "ignore-zero-info-sign", "xfail", "<exception>",
"<exception>-ok", "errno-<value>", "errno-<value>-ok", which may be
unconditional or conditional. "<exception>" indicates that a
correct result means the given exception should be raised.
"errno-<value>" indicates that a correct result means errno should
be set to the given value. "-ok" means not to test for the given
exception or errno value (whether because it was marked as possibly
missing or spurious, or because the calculation of correct results
indicated it was optional). Conditions "before-rounding" and
"after-rounding" indicate tests where expectations for underflow
Add test infrastructure for narrowing libm functions. This patch continues preparations for adding TS 18661-1 narrowing libm functions by adding the required testsuite infrastructure to test such functions through the libm-test infrastructure. That infrastructure is based around testing for a single type, FLOAT. For the narrowing functions, FLOAT, the "main" type for testing, is the function return type; the argument type is ARG_FLOAT. This is consistent with how the code built once for each type, libm-test-support.c, depends on FLOAT for such things as calculating ulps errors in results but can already handle different argument types (pointers, integers, long double for nexttoward). Makefile machinery is added to handle building tests for all pairs of types for which there are narrowing functions (as with non-narrowing functions, aliases are tested just the same as the functions they alias). gen-auto-libm-tests gains a --narrow option for building outputs for narrowing functions (so narrowing sqrt and fma will share the same inputs as non-narrowing, but gen-auto-libm-tests will be run with and without that option to generate different output files). In the narrowing case, the auto-libm-test-out-narrow-* files include annotations for each test about what properties ARG_FLOAT must have to be able to represent all the inputs for that test; those annotations result in calls to the TEST_COND_arg_fmt macro. gen-libm-test.pl has some minor updates to handle narrowing tests (for example, arguments in such tests must be surrounded by ARG_LIT calls instead of LIT calls). Various new macros are added to the C test support code (for example, sNaN initializers need to be properly typed, so arg_snan_value is added; other such arg_* macros are added as it seems cleanest to do so, though some are not strictly required). Special-casing of the ibm128 format to allow for its limitations is adjusted to handle it as the argument format as well as as the result format; thus, the tests of the new functions allow nonzero ulps only in the case where ibm128 is the argument format, as otherwise the functions correspond to fully-defined IEEE operations. The ulps in question appear as e.g. 'Function: "add_ldouble"' in libm-test-ulps (with 1ulp errors then listed for double and float for that function in powerpc); no support is added to generate corresponding faddl / daddl ulps listings in the ulps table in the manual. For the previous patch, I noted the need to avoid spurious macro expansions of identifiers such as "add". A test test-narrow-macros.c is added to verify such macro expansions are successfully avoided, and there is also a -mlong-double-64 version of that test for ldbl-opt. This test is set up to cover the full set of relevant identifiers from the start rather than adding functions one at a time as each function group is added. Tested for x86_64 (this patch in isolation, as well as testing for various configurations in conjunction with the actual addition of "add" functions). * math/Makefile (test-type-pairs): New variable. (test-type-pairs-f64xf128-yes): Likewise. (tests): Add test-narrow-macros. (libm-test-funcs-narrow): New variable. (libm-test-c-narrow): Likewise. (generated): Add $(libm-test-c-narrow). (libm-tests-base-narrow): New variable. (libm-tests-narrow): Likewise. (libm-tests): Add $(libm-tests-narrow). (libm-tests-for-type): Handle $(libm-tests-narrow). (libm-test-c-narrow-obj): New variable. ($(libm-test-c-narrow-obj)): New rule. ($(foreach t,$(libm-tests-narrow),$(objpfx)$(t).c)): Likewise. ($(foreach f,$(libm-test-funcs-narrow),$(objpfx)$(o)-$(f).o)): Use $(o-iterator) to set dependencies and CFLAGS. * math/gen-auto-libm-tests.c: Document use for narrowing functions. (output_for_one_input_case): Take argument NARROW. (generate_output): Likewise. Update call to output_for_one_input_case. (main): Take --narrow option. Update call to generate_output. * math/gen-libm-test.pl (_apply_lit): Take macro name as argument. (apply_lit): Update call to _apply_lit. (apply_arglit): New function. (parse_args): Handle "a" arguments. (parse_auto_input): Handle format names using ":". * math/README.libm-test: Document "a" parameter type. * math/libm-test-support.h (ARG_TYPE_MIN): New macro. (ARG_TYPE_TRUE_MIN): Likewise. (ARG_TYPE_MAX): Likwise. (ARG_MIN_EXP): Likewise. (ARG_MAX_EXP): Likewise. (ARG_MANT_DIG): Likewise. (TEST_COND_arg_ibm128): Likewise. (TEST_COND_ibm128_libgcc): Define conditional on [ARG_FLOAT]. (TEST_COND_arg_fmt): New macro. (init_max_error): Update prototype. * math/libm-test-support.c (test_ibm128): New variable. (init_max_error): Take argument testing_ibm128 and set test_ibm128 instead of using [TEST_COND_ibm128] conditional. (test_exceptions): Use test_ibm128 instead of TEST_COND_ibm128. * math/libm-test-driver.c (STR_ARG_FLOAT): New macro. [TEST_NARROW] (TEST_MSG): New definition. (arg_plus_zero): New macro. (arg_minus_zero): Likewise. (arg_plus_infty): Likewise. (arg_minus_infty): Likewise. (arg_qnan_value_pl): Likewise. (arg_qnan_value): Likewise. (arg_snan_value_pl): Likewise. (arg_snan_value): Likewise. (arg_max_value): Likewise. (arg_min_value): Likewise. (arg_min_subnorm_value): Likewise. [ARG_FLOAT] (struct test_aa_f_data): New struct type. (RUN_TEST_LOOP_aa_f): New macro. (TEST_SUFF): New macro. (TEST_SUFF_STR): Likewise. [!TEST_MATHVEC] (VEC_SUFF): Don't define. (TEST_COND_any_ibm128): New macro. (START): Use TEST_SUFF and TEST_SUFF_STR in initializer for this_func. Update call to init_max_error. * math/test-double.h (FUNC_NARROW_PREFIX): New macro. * math/test-float.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float128.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float32.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float32x.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float64.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float64x.h (FUNC_NARROW_PREFIX): Likewise. * math/test-math-scalar.h (TEST_NARROW): Likewise. * math/test-math-vector.h (TEST_NARROW): Likewise. * math/test-arg-double.h: New file. * math/test-arg-float128.h: Likewise. * math/test-arg-float32x.h: Likewise. * math/test-arg-float64.h: Likewise. * math/test-arg-float64x.h: Likewise. * math/test-arg-ldouble.h: Likewise. * math/test-math-narrow.h: Likewise. * math/test-narrow-macros.c: Likewise. * sysdeps/ieee754/ldbl-opt/test-narrow-macros-ldbl-64.c: Likewise. * sysdeps/ieee754/ldbl-opt/Makefile (tests): Add test-narrow-macros-ldbl-64. (CFLAGS-test-narrow-macros-ldbl-64.c): New variable.
2018-02-09 21:55:48 +00:00
exceptions depend on how the architecture detects tininess.
For functions rounding their results to a narrower type, the format
given on an output test line is the result format followed by
information about the requirements on the argument format to be
able to represent the argument values, in the form
"format:arg_fmt(MAX_EXP,NUM_ONES,MIN_EXP,MAX_PREC)". Instead of
separate lines for separate argument formats, an output test line
relates to all argument formats that can represent the values.
MAX_EXP is the maximum exponent of a nonzero bit in any argument,
or 0 if all arguments are zero; NUM_ONES is the maximum number of
leading bits with value 1 in an argument with exponent MAX_EXP, or
0 if all arguments are zero; MIN_EXP is the minimum exponent of a
nonzero bit in any argument, or 0 if all arguments are zero;
MAX_PREC is the maximum precision required to represent all
arguments, or 0 if all arguments are zero. */
#define _GNU_SOURCE
#include <assert.h>
#include <ctype.h>
#include <errno.h>
#include <error.h>
#include <stdbool.h>
#include <stdint.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <gmp.h>
#include <mpfr.h>
#include <mpc.h>
#define ARRAY_SIZE(A) (sizeof (A) / sizeof ((A)[0]))
/* The supported floating-point formats. */
typedef enum
{
fp_flt_32,
fp_dbl_64,
fp_ldbl_96_intel,
fp_ldbl_96_m68k,
fp_ldbl_128,
fp_ldbl_128ibm,
fp_num_formats,
fp_first_format = 0
} fp_format;
/* Structure describing a single floating-point format. */
typedef struct
{
/* The name of the format. */
const char *name;
/* A string for the largest normal value, or NULL for IEEE formats
where this can be determined automatically. */
const char *max_string;
/* The number of mantissa bits. */
int mant_dig;
/* The least N such that 2^N overflows. */
int max_exp;
/* One more than the least N such that 2^N is normal. */
int min_exp;
/* The largest normal value. */
mpfr_t max;
Relax gen-auto-libm-tests may-underflow rules, test log1p in all rounding modes. gen-auto-libm-tests presently allows but does not require underflow exceptions for results with magnitude in the range (greatest subnormal, least normal]. In some cases, the magnitude of the exact result is very slightly above the least normal, but rounding in the implementation results in it effectively computing an infinite-precision result that is slightly below the least normal, so raising an underflow exception. This is in accordance with the documented accuracy goals, but results in testsuite failures. This patch changes the logic to allow underflows when the mathematical result is up to 0.5ulp above the least normal (so in any case where the round-to-nearest result is the least normal). Ideally underflows in all these cases would be accepted only when an underflow with the actual result is consistent with the rounding mode (in FE_TOWARDZERO mode, a return value of the least normal implies that the infinite-precision result did not underflow so there should be no underflow exception, for example), so as to match the documented goals more precisely - whereas at present the tests for exceptions are completely independent of the tests of the returned values. (The same applies to overflow exceptions as well - they too should be checked for consistency with the result, as in FE_TOWARDZERO mode a result 1ulp below the largest finite value should be inconsistent with an overflow exception and cause a failure with overflow rather than simply being considered a 1ulp error when overflow is expected.) But the present patch at least deals with the cases causing spurious failures so that (a) certain existing tests no longer need to be marked as having spurious exceptions (such markings in auto-libm-test-in end up applying to more cases than just those they are needed for) and (b) log1p can be tested in all rounding modes without introducing more such failures. This patch duly moves tests of log1p to ALL_RM_TEST. Tested x86_64 and x86 and ulps updated accordingly. [BZ #16357] [BZ #16599] * math/gen-auto-libm-tests.c (fp_format_desc): Add field min_plus_half. (fp_formats): Update initializers. (init_fp_formats): Initialize new field. (output_for_one_input_case): Allow underflow for results up to min_plus_half. * math/libm-test.inc (log1p_test): Use ALL_RM_TEST. * math/auto-libm-test-in: Don't mark some underflows from asin and atanh as spurious. * math/auto-libm-test-out: Regenerated. * sysdeps/i386/fpu/libm-test-ulps: Update. * sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
2014-03-25 12:26:06 +00:00
/* The value 0.5ulp above the least positive normal value. */
mpfr_t min_plus_half;
/* The least positive normal value, 2^(MIN_EXP-1). */
mpfr_t min;
/* The greatest positive subnormal value. */
mpfr_t subnorm_max;
/* The least positive subnormal value, 2^(MIN_EXP-MANT_DIG). */
mpfr_t subnorm_min;
} fp_format_desc;
/* List of floating-point formats, in the same order as the fp_format
enumeration. */
static fp_format_desc fp_formats[fp_num_formats] =
{
{ "binary32", NULL, 24, 128, -125, {}, {}, {}, {}, {} },
{ "binary64", NULL, 53, 1024, -1021, {}, {}, {}, {}, {} },
{ "intel96", NULL, 64, 16384, -16381, {}, {}, {}, {}, {} },
{ "m68k96", NULL, 64, 16384, -16382, {}, {}, {}, {}, {} },
{ "binary128", NULL, 113, 16384, -16381, {}, {}, {}, {}, {} },
{ "ibm128", "0x1.fffffffffffff7ffffffffffff8p+1023",
Relax gen-auto-libm-tests may-underflow rules, test log1p in all rounding modes. gen-auto-libm-tests presently allows but does not require underflow exceptions for results with magnitude in the range (greatest subnormal, least normal]. In some cases, the magnitude of the exact result is very slightly above the least normal, but rounding in the implementation results in it effectively computing an infinite-precision result that is slightly below the least normal, so raising an underflow exception. This is in accordance with the documented accuracy goals, but results in testsuite failures. This patch changes the logic to allow underflows when the mathematical result is up to 0.5ulp above the least normal (so in any case where the round-to-nearest result is the least normal). Ideally underflows in all these cases would be accepted only when an underflow with the actual result is consistent with the rounding mode (in FE_TOWARDZERO mode, a return value of the least normal implies that the infinite-precision result did not underflow so there should be no underflow exception, for example), so as to match the documented goals more precisely - whereas at present the tests for exceptions are completely independent of the tests of the returned values. (The same applies to overflow exceptions as well - they too should be checked for consistency with the result, as in FE_TOWARDZERO mode a result 1ulp below the largest finite value should be inconsistent with an overflow exception and cause a failure with overflow rather than simply being considered a 1ulp error when overflow is expected.) But the present patch at least deals with the cases causing spurious failures so that (a) certain existing tests no longer need to be marked as having spurious exceptions (such markings in auto-libm-test-in end up applying to more cases than just those they are needed for) and (b) log1p can be tested in all rounding modes without introducing more such failures. This patch duly moves tests of log1p to ALL_RM_TEST. Tested x86_64 and x86 and ulps updated accordingly. [BZ #16357] [BZ #16599] * math/gen-auto-libm-tests.c (fp_format_desc): Add field min_plus_half. (fp_formats): Update initializers. (init_fp_formats): Initialize new field. (output_for_one_input_case): Allow underflow for results up to min_plus_half. * math/libm-test.inc (log1p_test): Use ALL_RM_TEST. * math/auto-libm-test-in: Don't mark some underflows from asin and atanh as spurious. * math/auto-libm-test-out: Regenerated. * sysdeps/i386/fpu/libm-test-ulps: Update. * sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
2014-03-25 12:26:06 +00:00
106, 1024, -968, {}, {}, {}, {}, {} },
};
/* The supported rounding modes. */
typedef enum
{
rm_downward,
rm_tonearest,
rm_towardzero,
rm_upward,
rm_num_modes,
rm_first_mode = 0
} rounding_mode;
/* Structure describing a single rounding mode. */
typedef struct
{
/* The name of the rounding mode. */
const char *name;
/* The MPFR rounding mode. */
mpfr_rnd_t mpfr_mode;
Move tests of fma from libm-test.inc to auto-libm-test-in. This patch moves tests of fma to auto-libm-test-in, adding the required support to gen-auto-libm-tests. Because fma can have exact zero results depending on the rounding mode, results of fma cannot always be determined from a single value computed in higher precision with a sticky bit. Thus, this patch adds support for recomputing results with the original MPFR/MPC function in the case where an exact zero is involved. (This also affects some results for cpow; when we start testing cpow in all rounding modes, I think it will be most appropriate to make those tests use IGNORE_ZERO_INF_SIGN, since ISO C does not attempt to determine signs of zero results, or special caes in general, for cpow, and I think signs of zero for cpow are beyond the scope of glibc's accuracy goals.) Simply treating the existing test inputs for fma like those for other functions (i.e., as representing the given value rounded up or down to any of the supported floating-point formats) increases the size of auto-libm-test-out by about 16MB (i.e., about half the file is fma test data). While rounded versions of tests are perfectly reasonable test inputs for fma, in this case having them seems excessive, so this patch allows functions to specify in gen-auto-libm-tests that the given test inputs are only to be interpreted exactly, not as corresponding to values rounded up and down. This reduces the size of the generated test data for fma to a more reasonable 2MB. A consequence of this patch is that fma is now tested for correct presence or absence of "inexact" exceptions, where previously this wasn't tested because I didn't want to try to add that test coverage manually to all the existing tests. As far as I know, the existing fma implementations are already correct in this regard. This patch provides the first cases where the gen-auto-libm-tests support for distinguishing before-rounding/after-rounding underflow actually produces separate entries in auto-libm-test-out (for functions without exactly determined results, the affected cases are all considered underflow-optional, so this only affects functions like fma with exactly determined results). I didn't see any signs of problems with this logic in the output. Tested x86_64 and x86. * math/auto-libm-test-in: Add tests of fma. * math/auto-libm-test-out: Regenerated. * math/libm-test.inc (fma_test_data): Use AUTO_TESTS_fff_f. (fma_towardzero_test_data): Likewise. (fma_downward_test_data): Likewise. (fma_upward_test_data): Likewise. * math/gen-auto-libm-tests.c (rounding_mode_desc): Add field mpc_mode. (rounding_modes): Add values for new field. (func_calc_method): Add value mpfr_fff_f. (func_calc_desc): Add mpfr_fff_f union field. (test_function): Add field exact_args. (FUNC): Add macro argument EXACT_ARGS. (FUNC_mpfr_f_f): Update call to FUNC. (FUNC_mpfr_f_f): Likewise. (FUNC_mpfr_ff_f): Likewise. (FUNC_mpfr_if_f): Likewise. (FUNC_mpc_c_f): Likewise. (FUNC_mpc_c_c): Likewise. (test_functions): Add fma. Update calls to FUNC. (handle_input_arg): Add argument exact_args. (add_test): Update call to handle_input_arg. (calc_generic_results): Add argument mode. Handle mpfr_fff_f. (output_for_one_input_case): Update call to calc_generic_results. Recalculate exact zero results in each rounding mode.
2014-02-18 21:48:51 +00:00
/* The MPC rounding mode. */
mpc_rnd_t mpc_mode;
} rounding_mode_desc;
/* List of rounding modes, in the same order as the rounding_mode
enumeration. */
static const rounding_mode_desc rounding_modes[rm_num_modes] =
{
Move tests of fma from libm-test.inc to auto-libm-test-in. This patch moves tests of fma to auto-libm-test-in, adding the required support to gen-auto-libm-tests. Because fma can have exact zero results depending on the rounding mode, results of fma cannot always be determined from a single value computed in higher precision with a sticky bit. Thus, this patch adds support for recomputing results with the original MPFR/MPC function in the case where an exact zero is involved. (This also affects some results for cpow; when we start testing cpow in all rounding modes, I think it will be most appropriate to make those tests use IGNORE_ZERO_INF_SIGN, since ISO C does not attempt to determine signs of zero results, or special caes in general, for cpow, and I think signs of zero for cpow are beyond the scope of glibc's accuracy goals.) Simply treating the existing test inputs for fma like those for other functions (i.e., as representing the given value rounded up or down to any of the supported floating-point formats) increases the size of auto-libm-test-out by about 16MB (i.e., about half the file is fma test data). While rounded versions of tests are perfectly reasonable test inputs for fma, in this case having them seems excessive, so this patch allows functions to specify in gen-auto-libm-tests that the given test inputs are only to be interpreted exactly, not as corresponding to values rounded up and down. This reduces the size of the generated test data for fma to a more reasonable 2MB. A consequence of this patch is that fma is now tested for correct presence or absence of "inexact" exceptions, where previously this wasn't tested because I didn't want to try to add that test coverage manually to all the existing tests. As far as I know, the existing fma implementations are already correct in this regard. This patch provides the first cases where the gen-auto-libm-tests support for distinguishing before-rounding/after-rounding underflow actually produces separate entries in auto-libm-test-out (for functions without exactly determined results, the affected cases are all considered underflow-optional, so this only affects functions like fma with exactly determined results). I didn't see any signs of problems with this logic in the output. Tested x86_64 and x86. * math/auto-libm-test-in: Add tests of fma. * math/auto-libm-test-out: Regenerated. * math/libm-test.inc (fma_test_data): Use AUTO_TESTS_fff_f. (fma_towardzero_test_data): Likewise. (fma_downward_test_data): Likewise. (fma_upward_test_data): Likewise. * math/gen-auto-libm-tests.c (rounding_mode_desc): Add field mpc_mode. (rounding_modes): Add values for new field. (func_calc_method): Add value mpfr_fff_f. (func_calc_desc): Add mpfr_fff_f union field. (test_function): Add field exact_args. (FUNC): Add macro argument EXACT_ARGS. (FUNC_mpfr_f_f): Update call to FUNC. (FUNC_mpfr_f_f): Likewise. (FUNC_mpfr_ff_f): Likewise. (FUNC_mpfr_if_f): Likewise. (FUNC_mpc_c_f): Likewise. (FUNC_mpc_c_c): Likewise. (test_functions): Add fma. Update calls to FUNC. (handle_input_arg): Add argument exact_args. (add_test): Update call to handle_input_arg. (calc_generic_results): Add argument mode. Handle mpfr_fff_f. (output_for_one_input_case): Update call to calc_generic_results. Recalculate exact zero results in each rounding mode.
2014-02-18 21:48:51 +00:00
{ "downward", MPFR_RNDD, MPC_RNDDD },
{ "tonearest", MPFR_RNDN, MPC_RNDNN },
{ "towardzero", MPFR_RNDZ, MPC_RNDZZ },
{ "upward", MPFR_RNDU, MPC_RNDUU },
};
/* The supported exceptions. */
typedef enum
{
exc_divbyzero,
exc_inexact,
exc_invalid,
exc_overflow,
exc_underflow,
exc_num_exceptions,
exc_first_exception = 0
} fp_exception;
/* List of exceptions, in the same order as the fp_exception
enumeration. */
static const char *const exceptions[exc_num_exceptions] =
{
"divbyzero",
"inexact",
"invalid",
"overflow",
"underflow",
};
/* The internal precision to use for most MPFR calculations, which
must be at least 2 more than the greatest precision of any
supported floating-point format. */
static int internal_precision;
/* A value that overflows all supported floating-point formats. */
static mpfr_t global_max;
/* A value that is at most half the least subnormal in any
floating-point format and so is rounded the same way as all
sufficiently small positive values. */
static mpfr_t global_min;
/* The maximum number of (real or integer) arguments to a function
handled by this program (complex arguments count as two real
arguments). */
#define MAX_NARGS 4
/* The maximum number of (real or integer) return values from a
function handled by this program. */
#define MAX_NRET 2
/* A type of a function argument or return value. */
typedef enum
{
/* No type (not a valid argument or return value). */
type_none,
/* A floating-point value with the type corresponding to that of
the function. */
type_fp,
/* An integer value of type int. */
type_int,
/* An integer value of type long. */
type_long,
/* An integer value of type long long. */
type_long_long,
} arg_ret_type;
/* A type of a generic real or integer value. */
typedef enum
{
/* No type. */
gtype_none,
/* Floating-point (represented with MPFR). */
gtype_fp,
/* Integer (represented with GMP). */
gtype_int,
} generic_value_type;
/* A generic value (argument or result). */
typedef struct
{
/* The type of this value. */
generic_value_type type;
/* Its value. */
union
{
mpfr_t f;
mpz_t i;
} value;
} generic_value;
/* A type of input flag. */
typedef enum
{
flag_no_test_inline,
Test cpow in all rounding modes. This patch enables testing of cpow in all rounding modes using ALL_RM_TEST. There were two reasons this was previously deferred: * MPC has complicated rounding-mode-dependent rules for the signs of exact zero real or imaginary parts in the result of mpc_pow. Annex G does not impose any such requirements and I don't think glibc should try to implement any particular logic here. This patch adds support for gen-auto-libm-tests passing the IGNORE_ZERO_INF_SIGN flag to libm-test.inc. * Error accumulations in some tests in non-default rounding modes exceed the maximum error permitted in libm-test.inc. This patch marks the problem tests with xfail-rounding. (It might be possible to reduce the accumulations a bit by using round-to-nearest when cpow calls clog, but I don't think there's much point; the implementation approach for cpow is fundamentally deficient, as discussed in the existing bug for cpow inaccuracy which can reasonably be considered to cover these less-inaccurate cases as well. It's possible that the test "cpow 2 0 10 0" will also need xfail-rounding on some platforms.) Tested x86_64 and x86 and ulps updated accordingly. * math/gen-auto-libm-tests.c: Document use of ignore-zero-inf-sign. (input_flag_type): Add value flag_ignore_zero_inf_sign. (input_flags): Add ignore-zero-inf-sign. (output_for_one_input_case): Handle flag_ignore_zero_inf_sign. * math/gen-libm-test.pl (generate_testfile): Handle ignore-zero-inf-sign. * math/auto-libm-test-in: Mark some cpow tests with ignore-zero-inf-sign and some with xfail-rounding. * math/auto-libm-test-out: Regenerated. * math/libm-test.inc (cpow_test): Use ALL_RM_TEST. * sysdeps/i386/fpu/libm-test-ulps: Update. * sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
2014-06-23 20:15:14 +00:00
flag_ignore_zero_inf_sign,
flag_xfail,
flag_xfail_rounding,
/* The "spurious" and "missing" flags must be in the same order as
the fp_exception enumeration. */
flag_spurious_divbyzero,
flag_spurious_inexact,
flag_spurious_invalid,
flag_spurious_overflow,
flag_spurious_underflow,
flag_spurious_errno,
flag_missing_divbyzero,
flag_missing_inexact,
flag_missing_invalid,
flag_missing_overflow,
flag_missing_underflow,
flag_missing_errno,
num_input_flag_types,
flag_first_flag = 0,
flag_spurious_first = flag_spurious_divbyzero,
flag_missing_first = flag_missing_divbyzero
} input_flag_type;
/* List of flags, in the same order as the input_flag_type
enumeration. */
static const char *const input_flags[num_input_flag_types] =
{
"no-test-inline",
Test cpow in all rounding modes. This patch enables testing of cpow in all rounding modes using ALL_RM_TEST. There were two reasons this was previously deferred: * MPC has complicated rounding-mode-dependent rules for the signs of exact zero real or imaginary parts in the result of mpc_pow. Annex G does not impose any such requirements and I don't think glibc should try to implement any particular logic here. This patch adds support for gen-auto-libm-tests passing the IGNORE_ZERO_INF_SIGN flag to libm-test.inc. * Error accumulations in some tests in non-default rounding modes exceed the maximum error permitted in libm-test.inc. This patch marks the problem tests with xfail-rounding. (It might be possible to reduce the accumulations a bit by using round-to-nearest when cpow calls clog, but I don't think there's much point; the implementation approach for cpow is fundamentally deficient, as discussed in the existing bug for cpow inaccuracy which can reasonably be considered to cover these less-inaccurate cases as well. It's possible that the test "cpow 2 0 10 0" will also need xfail-rounding on some platforms.) Tested x86_64 and x86 and ulps updated accordingly. * math/gen-auto-libm-tests.c: Document use of ignore-zero-inf-sign. (input_flag_type): Add value flag_ignore_zero_inf_sign. (input_flags): Add ignore-zero-inf-sign. (output_for_one_input_case): Handle flag_ignore_zero_inf_sign. * math/gen-libm-test.pl (generate_testfile): Handle ignore-zero-inf-sign. * math/auto-libm-test-in: Mark some cpow tests with ignore-zero-inf-sign and some with xfail-rounding. * math/auto-libm-test-out: Regenerated. * math/libm-test.inc (cpow_test): Use ALL_RM_TEST. * sysdeps/i386/fpu/libm-test-ulps: Update. * sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
2014-06-23 20:15:14 +00:00
"ignore-zero-inf-sign",
"xfail",
"xfail-rounding",
"spurious-divbyzero",
"spurious-inexact",
"spurious-invalid",
"spurious-overflow",
"spurious-underflow",
"spurious-errno",
"missing-divbyzero",
"missing-inexact",
"missing-invalid",
"missing-overflow",
"missing-underflow",
"missing-errno",
};
/* An input flag, possibly conditional. */
typedef struct
{
/* The type of this flag. */
input_flag_type type;
/* The conditions on this flag, as a string ":cond1:cond2..." or
NULL. */
const char *cond;
} input_flag;
/* Structure describing a single test from the input file (which may
expand into many tests in the output). The choice of function,
which implies the numbers and types of arguments and results, is
implicit rather than stored in this structure (except as part of
the source line). */
typedef struct
{
/* The text of the input line describing the test, including the
trailing newline. */
const char *line;
/* The number of combinations of interpretations of input values for
different floating-point formats and rounding modes. */
size_t num_input_cases;
/* The corresponding lists of inputs. */
generic_value **inputs;
/* The number of flags for this test. */
size_t num_flags;
/* The corresponding list of flags. */
input_flag *flags;
/* The old output for this test. */
const char *old_output;
} input_test;
/* Ways to calculate a function. */
typedef enum
{
/* MPFR function with a single argument and result. */
mpfr_f_f,
/* MPFR function with two arguments and one result. */
mpfr_ff_f,
Move tests of fma from libm-test.inc to auto-libm-test-in. This patch moves tests of fma to auto-libm-test-in, adding the required support to gen-auto-libm-tests. Because fma can have exact zero results depending on the rounding mode, results of fma cannot always be determined from a single value computed in higher precision with a sticky bit. Thus, this patch adds support for recomputing results with the original MPFR/MPC function in the case where an exact zero is involved. (This also affects some results for cpow; when we start testing cpow in all rounding modes, I think it will be most appropriate to make those tests use IGNORE_ZERO_INF_SIGN, since ISO C does not attempt to determine signs of zero results, or special caes in general, for cpow, and I think signs of zero for cpow are beyond the scope of glibc's accuracy goals.) Simply treating the existing test inputs for fma like those for other functions (i.e., as representing the given value rounded up or down to any of the supported floating-point formats) increases the size of auto-libm-test-out by about 16MB (i.e., about half the file is fma test data). While rounded versions of tests are perfectly reasonable test inputs for fma, in this case having them seems excessive, so this patch allows functions to specify in gen-auto-libm-tests that the given test inputs are only to be interpreted exactly, not as corresponding to values rounded up and down. This reduces the size of the generated test data for fma to a more reasonable 2MB. A consequence of this patch is that fma is now tested for correct presence or absence of "inexact" exceptions, where previously this wasn't tested because I didn't want to try to add that test coverage manually to all the existing tests. As far as I know, the existing fma implementations are already correct in this regard. This patch provides the first cases where the gen-auto-libm-tests support for distinguishing before-rounding/after-rounding underflow actually produces separate entries in auto-libm-test-out (for functions without exactly determined results, the affected cases are all considered underflow-optional, so this only affects functions like fma with exactly determined results). I didn't see any signs of problems with this logic in the output. Tested x86_64 and x86. * math/auto-libm-test-in: Add tests of fma. * math/auto-libm-test-out: Regenerated. * math/libm-test.inc (fma_test_data): Use AUTO_TESTS_fff_f. (fma_towardzero_test_data): Likewise. (fma_downward_test_data): Likewise. (fma_upward_test_data): Likewise. * math/gen-auto-libm-tests.c (rounding_mode_desc): Add field mpc_mode. (rounding_modes): Add values for new field. (func_calc_method): Add value mpfr_fff_f. (func_calc_desc): Add mpfr_fff_f union field. (test_function): Add field exact_args. (FUNC): Add macro argument EXACT_ARGS. (FUNC_mpfr_f_f): Update call to FUNC. (FUNC_mpfr_f_f): Likewise. (FUNC_mpfr_ff_f): Likewise. (FUNC_mpfr_if_f): Likewise. (FUNC_mpc_c_f): Likewise. (FUNC_mpc_c_c): Likewise. (test_functions): Add fma. Update calls to FUNC. (handle_input_arg): Add argument exact_args. (add_test): Update call to handle_input_arg. (calc_generic_results): Add argument mode. Handle mpfr_fff_f. (output_for_one_input_case): Update call to calc_generic_results. Recalculate exact zero results in each rounding mode.
2014-02-18 21:48:51 +00:00
/* MPFR function with three arguments and one result. */
mpfr_fff_f,
/* MPFR function with a single argument and floating-point and
integer results. */
mpfr_f_f1,
/* MPFR function with integer and floating-point arguments and one
result. */
mpfr_if_f,
/* MPFR function with a single argument and two floating-point
results. */
mpfr_f_11,
/* MPC function with a single complex argument and one real
result. */
mpc_c_f,
Move various TEST_c_c tests from libm-test.inc to auto-libm-test-inc. This patch moves tests of ccos, ccosh, cexp, clog, csqrt, ctan and ctanh to auto-libm-test-in, adding the required support to gen-auto-libm-tests. Other TEST_c_c functions aren't moved for now (although the relevant table entries are put in gen-auto-libm-tests for it to know how to handle them): clog10 because of a known MPC bug causing it to hang for at least some pure imaginary inputs (fixed in SVN, but I'd rather not rely on unreleased versions of MPFR or MPC even if relying on very recent releases); the inverse trig and hyperbolic functions because of known slowness in special cases; and csin / csinh because of observed slowness that I need to investigate and report to the MPC maintainers. Slowness can be bypassed by moving to incremental generation (only for new / changed tests) rather than regenerating the whole of auto-libm-test-out every time, but that needs implementing. (This patch takes the time for running gen-auto-libm-tests from about one second to seven, on my system, which I think is reasonable. The slow functions would make it take several minutes at least, which seems unreasonable.) Tested x86_64 and x86 and ulps updated accordingly. * math/auto-libm-test-in: Add tests of ccos, ccosh, cexp, clog, csqrt, ctan and ctanh. * math/auto-libm-test-out: Regenerated. * math/libm-test.inc (TEST_COND_x86_64): New macro. (TEST_COND_x86): Likewise. (ccos_test_data): Use AUTO_TESTS_c_c. (ccosh_test_data): Likewise. (cexp_test_data): Likewise. (clog_test_data): Likewise. (csqrt_test_data): Likewise. (ctan_test_data): Likewise. (ctan_tonearest_test_data): Likewise. (ctan_towardzero_test_data): Likewise. (ctan_downward_test_data): Likewise. (ctan_upward_test_data): Likewise. (ctanh_test_data): Likewise. (ctanh_tonearest_test_data): Likewise. (ctanh_towardzero_test_data): Likewise. (ctanh_downward_test_data): Likewise. (ctanh_upward_test_data): Likewise. * math/gen-auto-libm-tests.c (func_calc_method): Add value mpc_c_c. (func_calc_desc): Add mpc_c_c union field. (FUNC_mpc_c_c): New macro. (test_functions): Add cacos, cacosh, casin, casinh, catan, catanh, ccos, ccosh, cexp, clog, clog10, csin, csinh, csqrt, ctan and ctanh. (special_fill_min_subnorm_p120): New function. (special_real_inputs): Add min_subnorm_p120. (calc_generic_results): Handle mpc_c_c. * sysdeps/i386/fpu/libm-test-ulps: Update. * sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
2013-12-20 12:32:44 +00:00
/* MPC function with a single complex argument and one complex
result. */
mpc_c_c,
/* MPC function with two complex arguments and one complex
result. */
mpc_cc_c,
} func_calc_method;
/* Description of how to calculate a function. */
typedef struct
{
/* Which method is used to calculate the function. */
func_calc_method method;
/* The specific function called. */
union
{
int (*mpfr_f_f) (mpfr_t, const mpfr_t, mpfr_rnd_t);
int (*mpfr_ff_f) (mpfr_t, const mpfr_t, const mpfr_t, mpfr_rnd_t);
Move tests of fma from libm-test.inc to auto-libm-test-in. This patch moves tests of fma to auto-libm-test-in, adding the required support to gen-auto-libm-tests. Because fma can have exact zero results depending on the rounding mode, results of fma cannot always be determined from a single value computed in higher precision with a sticky bit. Thus, this patch adds support for recomputing results with the original MPFR/MPC function in the case where an exact zero is involved. (This also affects some results for cpow; when we start testing cpow in all rounding modes, I think it will be most appropriate to make those tests use IGNORE_ZERO_INF_SIGN, since ISO C does not attempt to determine signs of zero results, or special caes in general, for cpow, and I think signs of zero for cpow are beyond the scope of glibc's accuracy goals.) Simply treating the existing test inputs for fma like those for other functions (i.e., as representing the given value rounded up or down to any of the supported floating-point formats) increases the size of auto-libm-test-out by about 16MB (i.e., about half the file is fma test data). While rounded versions of tests are perfectly reasonable test inputs for fma, in this case having them seems excessive, so this patch allows functions to specify in gen-auto-libm-tests that the given test inputs are only to be interpreted exactly, not as corresponding to values rounded up and down. This reduces the size of the generated test data for fma to a more reasonable 2MB. A consequence of this patch is that fma is now tested for correct presence or absence of "inexact" exceptions, where previously this wasn't tested because I didn't want to try to add that test coverage manually to all the existing tests. As far as I know, the existing fma implementations are already correct in this regard. This patch provides the first cases where the gen-auto-libm-tests support for distinguishing before-rounding/after-rounding underflow actually produces separate entries in auto-libm-test-out (for functions without exactly determined results, the affected cases are all considered underflow-optional, so this only affects functions like fma with exactly determined results). I didn't see any signs of problems with this logic in the output. Tested x86_64 and x86. * math/auto-libm-test-in: Add tests of fma. * math/auto-libm-test-out: Regenerated. * math/libm-test.inc (fma_test_data): Use AUTO_TESTS_fff_f. (fma_towardzero_test_data): Likewise. (fma_downward_test_data): Likewise. (fma_upward_test_data): Likewise. * math/gen-auto-libm-tests.c (rounding_mode_desc): Add field mpc_mode. (rounding_modes): Add values for new field. (func_calc_method): Add value mpfr_fff_f. (func_calc_desc): Add mpfr_fff_f union field. (test_function): Add field exact_args. (FUNC): Add macro argument EXACT_ARGS. (FUNC_mpfr_f_f): Update call to FUNC. (FUNC_mpfr_f_f): Likewise. (FUNC_mpfr_ff_f): Likewise. (FUNC_mpfr_if_f): Likewise. (FUNC_mpc_c_f): Likewise. (FUNC_mpc_c_c): Likewise. (test_functions): Add fma. Update calls to FUNC. (handle_input_arg): Add argument exact_args. (add_test): Update call to handle_input_arg. (calc_generic_results): Add argument mode. Handle mpfr_fff_f. (output_for_one_input_case): Update call to calc_generic_results. Recalculate exact zero results in each rounding mode.
2014-02-18 21:48:51 +00:00
int (*mpfr_fff_f) (mpfr_t, const mpfr_t, const mpfr_t, const mpfr_t,
mpfr_rnd_t);
int (*mpfr_f_f1) (mpfr_t, int *, const mpfr_t, mpfr_rnd_t);
int (*mpfr_if_f) (mpfr_t, long, const mpfr_t, mpfr_rnd_t);
int (*mpfr_f_11) (mpfr_t, mpfr_t, const mpfr_t, mpfr_rnd_t);
int (*mpc_c_f) (mpfr_t, const mpc_t, mpfr_rnd_t);
Move various TEST_c_c tests from libm-test.inc to auto-libm-test-inc. This patch moves tests of ccos, ccosh, cexp, clog, csqrt, ctan and ctanh to auto-libm-test-in, adding the required support to gen-auto-libm-tests. Other TEST_c_c functions aren't moved for now (although the relevant table entries are put in gen-auto-libm-tests for it to know how to handle them): clog10 because of a known MPC bug causing it to hang for at least some pure imaginary inputs (fixed in SVN, but I'd rather not rely on unreleased versions of MPFR or MPC even if relying on very recent releases); the inverse trig and hyperbolic functions because of known slowness in special cases; and csin / csinh because of observed slowness that I need to investigate and report to the MPC maintainers. Slowness can be bypassed by moving to incremental generation (only for new / changed tests) rather than regenerating the whole of auto-libm-test-out every time, but that needs implementing. (This patch takes the time for running gen-auto-libm-tests from about one second to seven, on my system, which I think is reasonable. The slow functions would make it take several minutes at least, which seems unreasonable.) Tested x86_64 and x86 and ulps updated accordingly. * math/auto-libm-test-in: Add tests of ccos, ccosh, cexp, clog, csqrt, ctan and ctanh. * math/auto-libm-test-out: Regenerated. * math/libm-test.inc (TEST_COND_x86_64): New macro. (TEST_COND_x86): Likewise. (ccos_test_data): Use AUTO_TESTS_c_c. (ccosh_test_data): Likewise. (cexp_test_data): Likewise. (clog_test_data): Likewise. (csqrt_test_data): Likewise. (ctan_test_data): Likewise. (ctan_tonearest_test_data): Likewise. (ctan_towardzero_test_data): Likewise. (ctan_downward_test_data): Likewise. (ctan_upward_test_data): Likewise. (ctanh_test_data): Likewise. (ctanh_tonearest_test_data): Likewise. (ctanh_towardzero_test_data): Likewise. (ctanh_downward_test_data): Likewise. (ctanh_upward_test_data): Likewise. * math/gen-auto-libm-tests.c (func_calc_method): Add value mpc_c_c. (func_calc_desc): Add mpc_c_c union field. (FUNC_mpc_c_c): New macro. (test_functions): Add cacos, cacosh, casin, casinh, catan, catanh, ccos, ccosh, cexp, clog, clog10, csin, csinh, csqrt, ctan and ctanh. (special_fill_min_subnorm_p120): New function. (special_real_inputs): Add min_subnorm_p120. (calc_generic_results): Handle mpc_c_c. * sysdeps/i386/fpu/libm-test-ulps: Update. * sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
2013-12-20 12:32:44 +00:00
int (*mpc_c_c) (mpc_t, const mpc_t, mpc_rnd_t);
int (*mpc_cc_c) (mpc_t, const mpc_t, const mpc_t, mpc_rnd_t);
} func;
} func_calc_desc;
/* Structure describing a function handled by this program. */
typedef struct
{
/* The name of the function. */
const char *name;
/* The number of arguments. */
size_t num_args;
/* The types of the arguments. */
arg_ret_type arg_types[MAX_NARGS];
/* The number of return values. */
size_t num_ret;
/* The types of the return values. */
arg_ret_type ret_types[MAX_NRET];
/* Whether the function has exactly determined results and
exceptions. */
bool exact;
/* Whether the function is a complex function, so errno setting is
optional. */
bool complex_fn;
Move tests of fma from libm-test.inc to auto-libm-test-in. This patch moves tests of fma to auto-libm-test-in, adding the required support to gen-auto-libm-tests. Because fma can have exact zero results depending on the rounding mode, results of fma cannot always be determined from a single value computed in higher precision with a sticky bit. Thus, this patch adds support for recomputing results with the original MPFR/MPC function in the case where an exact zero is involved. (This also affects some results for cpow; when we start testing cpow in all rounding modes, I think it will be most appropriate to make those tests use IGNORE_ZERO_INF_SIGN, since ISO C does not attempt to determine signs of zero results, or special caes in general, for cpow, and I think signs of zero for cpow are beyond the scope of glibc's accuracy goals.) Simply treating the existing test inputs for fma like those for other functions (i.e., as representing the given value rounded up or down to any of the supported floating-point formats) increases the size of auto-libm-test-out by about 16MB (i.e., about half the file is fma test data). While rounded versions of tests are perfectly reasonable test inputs for fma, in this case having them seems excessive, so this patch allows functions to specify in gen-auto-libm-tests that the given test inputs are only to be interpreted exactly, not as corresponding to values rounded up and down. This reduces the size of the generated test data for fma to a more reasonable 2MB. A consequence of this patch is that fma is now tested for correct presence or absence of "inexact" exceptions, where previously this wasn't tested because I didn't want to try to add that test coverage manually to all the existing tests. As far as I know, the existing fma implementations are already correct in this regard. This patch provides the first cases where the gen-auto-libm-tests support for distinguishing before-rounding/after-rounding underflow actually produces separate entries in auto-libm-test-out (for functions without exactly determined results, the affected cases are all considered underflow-optional, so this only affects functions like fma with exactly determined results). I didn't see any signs of problems with this logic in the output. Tested x86_64 and x86. * math/auto-libm-test-in: Add tests of fma. * math/auto-libm-test-out: Regenerated. * math/libm-test.inc (fma_test_data): Use AUTO_TESTS_fff_f. (fma_towardzero_test_data): Likewise. (fma_downward_test_data): Likewise. (fma_upward_test_data): Likewise. * math/gen-auto-libm-tests.c (rounding_mode_desc): Add field mpc_mode. (rounding_modes): Add values for new field. (func_calc_method): Add value mpfr_fff_f. (func_calc_desc): Add mpfr_fff_f union field. (test_function): Add field exact_args. (FUNC): Add macro argument EXACT_ARGS. (FUNC_mpfr_f_f): Update call to FUNC. (FUNC_mpfr_f_f): Likewise. (FUNC_mpfr_ff_f): Likewise. (FUNC_mpfr_if_f): Likewise. (FUNC_mpc_c_f): Likewise. (FUNC_mpc_c_c): Likewise. (test_functions): Add fma. Update calls to FUNC. (handle_input_arg): Add argument exact_args. (add_test): Update call to handle_input_arg. (calc_generic_results): Add argument mode. Handle mpfr_fff_f. (output_for_one_input_case): Update call to calc_generic_results. Recalculate exact zero results in each rounding mode.
2014-02-18 21:48:51 +00:00
/* Whether to treat arguments given as floating-point constants as
exact only, rather than rounding them up and down to all
formats. */
bool exact_args;
/* How to calculate this function. */
func_calc_desc calc;
/* The number of tests allocated for this function. */
size_t num_tests_alloc;
/* The number of tests for this function. */
size_t num_tests;
/* The tests themselves. */
input_test *tests;
} test_function;
#define ARGS1(T1) 1, { T1 }
#define ARGS2(T1, T2) 2, { T1, T2 }
#define ARGS3(T1, T2, T3) 3, { T1, T2, T3 }
#define ARGS4(T1, T2, T3, T4) 4, { T1, T2, T3, T4 }
#define RET1(T1) 1, { T1 }
#define RET2(T1, T2) 2, { T1, T2 }
#define CALC(TYPE, FN) { TYPE, { .TYPE = FN } }
Move tests of fma from libm-test.inc to auto-libm-test-in. This patch moves tests of fma to auto-libm-test-in, adding the required support to gen-auto-libm-tests. Because fma can have exact zero results depending on the rounding mode, results of fma cannot always be determined from a single value computed in higher precision with a sticky bit. Thus, this patch adds support for recomputing results with the original MPFR/MPC function in the case where an exact zero is involved. (This also affects some results for cpow; when we start testing cpow in all rounding modes, I think it will be most appropriate to make those tests use IGNORE_ZERO_INF_SIGN, since ISO C does not attempt to determine signs of zero results, or special caes in general, for cpow, and I think signs of zero for cpow are beyond the scope of glibc's accuracy goals.) Simply treating the existing test inputs for fma like those for other functions (i.e., as representing the given value rounded up or down to any of the supported floating-point formats) increases the size of auto-libm-test-out by about 16MB (i.e., about half the file is fma test data). While rounded versions of tests are perfectly reasonable test inputs for fma, in this case having them seems excessive, so this patch allows functions to specify in gen-auto-libm-tests that the given test inputs are only to be interpreted exactly, not as corresponding to values rounded up and down. This reduces the size of the generated test data for fma to a more reasonable 2MB. A consequence of this patch is that fma is now tested for correct presence or absence of "inexact" exceptions, where previously this wasn't tested because I didn't want to try to add that test coverage manually to all the existing tests. As far as I know, the existing fma implementations are already correct in this regard. This patch provides the first cases where the gen-auto-libm-tests support for distinguishing before-rounding/after-rounding underflow actually produces separate entries in auto-libm-test-out (for functions without exactly determined results, the affected cases are all considered underflow-optional, so this only affects functions like fma with exactly determined results). I didn't see any signs of problems with this logic in the output. Tested x86_64 and x86. * math/auto-libm-test-in: Add tests of fma. * math/auto-libm-test-out: Regenerated. * math/libm-test.inc (fma_test_data): Use AUTO_TESTS_fff_f. (fma_towardzero_test_data): Likewise. (fma_downward_test_data): Likewise. (fma_upward_test_data): Likewise. * math/gen-auto-libm-tests.c (rounding_mode_desc): Add field mpc_mode. (rounding_modes): Add values for new field. (func_calc_method): Add value mpfr_fff_f. (func_calc_desc): Add mpfr_fff_f union field. (test_function): Add field exact_args. (FUNC): Add macro argument EXACT_ARGS. (FUNC_mpfr_f_f): Update call to FUNC. (FUNC_mpfr_f_f): Likewise. (FUNC_mpfr_ff_f): Likewise. (FUNC_mpfr_if_f): Likewise. (FUNC_mpc_c_f): Likewise. (FUNC_mpc_c_c): Likewise. (test_functions): Add fma. Update calls to FUNC. (handle_input_arg): Add argument exact_args. (add_test): Update call to handle_input_arg. (calc_generic_results): Add argument mode. Handle mpfr_fff_f. (output_for_one_input_case): Update call to calc_generic_results. Recalculate exact zero results in each rounding mode.
2014-02-18 21:48:51 +00:00
#define FUNC(NAME, ARGS, RET, EXACT, COMPLEX_FN, EXACT_ARGS, CALC) \
{ \
NAME, ARGS, RET, EXACT, COMPLEX_FN, EXACT_ARGS, CALC, 0, 0, NULL \
}
Move tests of fma from libm-test.inc to auto-libm-test-in. This patch moves tests of fma to auto-libm-test-in, adding the required support to gen-auto-libm-tests. Because fma can have exact zero results depending on the rounding mode, results of fma cannot always be determined from a single value computed in higher precision with a sticky bit. Thus, this patch adds support for recomputing results with the original MPFR/MPC function in the case where an exact zero is involved. (This also affects some results for cpow; when we start testing cpow in all rounding modes, I think it will be most appropriate to make those tests use IGNORE_ZERO_INF_SIGN, since ISO C does not attempt to determine signs of zero results, or special caes in general, for cpow, and I think signs of zero for cpow are beyond the scope of glibc's accuracy goals.) Simply treating the existing test inputs for fma like those for other functions (i.e., as representing the given value rounded up or down to any of the supported floating-point formats) increases the size of auto-libm-test-out by about 16MB (i.e., about half the file is fma test data). While rounded versions of tests are perfectly reasonable test inputs for fma, in this case having them seems excessive, so this patch allows functions to specify in gen-auto-libm-tests that the given test inputs are only to be interpreted exactly, not as corresponding to values rounded up and down. This reduces the size of the generated test data for fma to a more reasonable 2MB. A consequence of this patch is that fma is now tested for correct presence or absence of "inexact" exceptions, where previously this wasn't tested because I didn't want to try to add that test coverage manually to all the existing tests. As far as I know, the existing fma implementations are already correct in this regard. This patch provides the first cases where the gen-auto-libm-tests support for distinguishing before-rounding/after-rounding underflow actually produces separate entries in auto-libm-test-out (for functions without exactly determined results, the affected cases are all considered underflow-optional, so this only affects functions like fma with exactly determined results). I didn't see any signs of problems with this logic in the output. Tested x86_64 and x86. * math/auto-libm-test-in: Add tests of fma. * math/auto-libm-test-out: Regenerated. * math/libm-test.inc (fma_test_data): Use AUTO_TESTS_fff_f. (fma_towardzero_test_data): Likewise. (fma_downward_test_data): Likewise. (fma_upward_test_data): Likewise. * math/gen-auto-libm-tests.c (rounding_mode_desc): Add field mpc_mode. (rounding_modes): Add values for new field. (func_calc_method): Add value mpfr_fff_f. (func_calc_desc): Add mpfr_fff_f union field. (test_function): Add field exact_args. (FUNC): Add macro argument EXACT_ARGS. (FUNC_mpfr_f_f): Update call to FUNC. (FUNC_mpfr_f_f): Likewise. (FUNC_mpfr_ff_f): Likewise. (FUNC_mpfr_if_f): Likewise. (FUNC_mpc_c_f): Likewise. (FUNC_mpc_c_c): Likewise. (test_functions): Add fma. Update calls to FUNC. (handle_input_arg): Add argument exact_args. (add_test): Update call to handle_input_arg. (calc_generic_results): Add argument mode. Handle mpfr_fff_f. (output_for_one_input_case): Update call to calc_generic_results. Recalculate exact zero results in each rounding mode.
2014-02-18 21:48:51 +00:00
#define FUNC_mpfr_f_f(NAME, MPFR_FUNC, EXACT) \
FUNC (NAME, ARGS1 (type_fp), RET1 (type_fp), EXACT, false, false, \
CALC (mpfr_f_f, MPFR_FUNC))
#define FUNC_mpfr_ff_f(NAME, MPFR_FUNC, EXACT) \
FUNC (NAME, ARGS2 (type_fp, type_fp), RET1 (type_fp), EXACT, false, \
Move tests of fma from libm-test.inc to auto-libm-test-in. This patch moves tests of fma to auto-libm-test-in, adding the required support to gen-auto-libm-tests. Because fma can have exact zero results depending on the rounding mode, results of fma cannot always be determined from a single value computed in higher precision with a sticky bit. Thus, this patch adds support for recomputing results with the original MPFR/MPC function in the case where an exact zero is involved. (This also affects some results for cpow; when we start testing cpow in all rounding modes, I think it will be most appropriate to make those tests use IGNORE_ZERO_INF_SIGN, since ISO C does not attempt to determine signs of zero results, or special caes in general, for cpow, and I think signs of zero for cpow are beyond the scope of glibc's accuracy goals.) Simply treating the existing test inputs for fma like those for other functions (i.e., as representing the given value rounded up or down to any of the supported floating-point formats) increases the size of auto-libm-test-out by about 16MB (i.e., about half the file is fma test data). While rounded versions of tests are perfectly reasonable test inputs for fma, in this case having them seems excessive, so this patch allows functions to specify in gen-auto-libm-tests that the given test inputs are only to be interpreted exactly, not as corresponding to values rounded up and down. This reduces the size of the generated test data for fma to a more reasonable 2MB. A consequence of this patch is that fma is now tested for correct presence or absence of "inexact" exceptions, where previously this wasn't tested because I didn't want to try to add that test coverage manually to all the existing tests. As far as I know, the existing fma implementations are already correct in this regard. This patch provides the first cases where the gen-auto-libm-tests support for distinguishing before-rounding/after-rounding underflow actually produces separate entries in auto-libm-test-out (for functions without exactly determined results, the affected cases are all considered underflow-optional, so this only affects functions like fma with exactly determined results). I didn't see any signs of problems with this logic in the output. Tested x86_64 and x86. * math/auto-libm-test-in: Add tests of fma. * math/auto-libm-test-out: Regenerated. * math/libm-test.inc (fma_test_data): Use AUTO_TESTS_fff_f. (fma_towardzero_test_data): Likewise. (fma_downward_test_data): Likewise. (fma_upward_test_data): Likewise. * math/gen-auto-libm-tests.c (rounding_mode_desc): Add field mpc_mode. (rounding_modes): Add values for new field. (func_calc_method): Add value mpfr_fff_f. (func_calc_desc): Add mpfr_fff_f union field. (test_function): Add field exact_args. (FUNC): Add macro argument EXACT_ARGS. (FUNC_mpfr_f_f): Update call to FUNC. (FUNC_mpfr_f_f): Likewise. (FUNC_mpfr_ff_f): Likewise. (FUNC_mpfr_if_f): Likewise. (FUNC_mpc_c_f): Likewise. (FUNC_mpc_c_c): Likewise. (test_functions): Add fma. Update calls to FUNC. (handle_input_arg): Add argument exact_args. (add_test): Update call to handle_input_arg. (calc_generic_results): Add argument mode. Handle mpfr_fff_f. (output_for_one_input_case): Update call to calc_generic_results. Recalculate exact zero results in each rounding mode.
2014-02-18 21:48:51 +00:00
false, CALC (mpfr_ff_f, MPFR_FUNC))
#define FUNC_mpfr_if_f(NAME, MPFR_FUNC, EXACT) \
FUNC (NAME, ARGS2 (type_int, type_fp), RET1 (type_fp), EXACT, false, \
Move tests of fma from libm-test.inc to auto-libm-test-in. This patch moves tests of fma to auto-libm-test-in, adding the required support to gen-auto-libm-tests. Because fma can have exact zero results depending on the rounding mode, results of fma cannot always be determined from a single value computed in higher precision with a sticky bit. Thus, this patch adds support for recomputing results with the original MPFR/MPC function in the case where an exact zero is involved. (This also affects some results for cpow; when we start testing cpow in all rounding modes, I think it will be most appropriate to make those tests use IGNORE_ZERO_INF_SIGN, since ISO C does not attempt to determine signs of zero results, or special caes in general, for cpow, and I think signs of zero for cpow are beyond the scope of glibc's accuracy goals.) Simply treating the existing test inputs for fma like those for other functions (i.e., as representing the given value rounded up or down to any of the supported floating-point formats) increases the size of auto-libm-test-out by about 16MB (i.e., about half the file is fma test data). While rounded versions of tests are perfectly reasonable test inputs for fma, in this case having them seems excessive, so this patch allows functions to specify in gen-auto-libm-tests that the given test inputs are only to be interpreted exactly, not as corresponding to values rounded up and down. This reduces the size of the generated test data for fma to a more reasonable 2MB. A consequence of this patch is that fma is now tested for correct presence or absence of "inexact" exceptions, where previously this wasn't tested because I didn't want to try to add that test coverage manually to all the existing tests. As far as I know, the existing fma implementations are already correct in this regard. This patch provides the first cases where the gen-auto-libm-tests support for distinguishing before-rounding/after-rounding underflow actually produces separate entries in auto-libm-test-out (for functions without exactly determined results, the affected cases are all considered underflow-optional, so this only affects functions like fma with exactly determined results). I didn't see any signs of problems with this logic in the output. Tested x86_64 and x86. * math/auto-libm-test-in: Add tests of fma. * math/auto-libm-test-out: Regenerated. * math/libm-test.inc (fma_test_data): Use AUTO_TESTS_fff_f. (fma_towardzero_test_data): Likewise. (fma_downward_test_data): Likewise. (fma_upward_test_data): Likewise. * math/gen-auto-libm-tests.c (rounding_mode_desc): Add field mpc_mode. (rounding_modes): Add values for new field. (func_calc_method): Add value mpfr_fff_f. (func_calc_desc): Add mpfr_fff_f union field. (test_function): Add field exact_args. (FUNC): Add macro argument EXACT_ARGS. (FUNC_mpfr_f_f): Update call to FUNC. (FUNC_mpfr_f_f): Likewise. (FUNC_mpfr_ff_f): Likewise. (FUNC_mpfr_if_f): Likewise. (FUNC_mpc_c_f): Likewise. (FUNC_mpc_c_c): Likewise. (test_functions): Add fma. Update calls to FUNC. (handle_input_arg): Add argument exact_args. (add_test): Update call to handle_input_arg. (calc_generic_results): Add argument mode. Handle mpfr_fff_f. (output_for_one_input_case): Update call to calc_generic_results. Recalculate exact zero results in each rounding mode.
2014-02-18 21:48:51 +00:00
false, CALC (mpfr_if_f, MPFR_FUNC))
#define FUNC_mpc_c_f(NAME, MPFR_FUNC, EXACT) \
FUNC (NAME, ARGS2 (type_fp, type_fp), RET1 (type_fp), EXACT, true, \
Move tests of fma from libm-test.inc to auto-libm-test-in. This patch moves tests of fma to auto-libm-test-in, adding the required support to gen-auto-libm-tests. Because fma can have exact zero results depending on the rounding mode, results of fma cannot always be determined from a single value computed in higher precision with a sticky bit. Thus, this patch adds support for recomputing results with the original MPFR/MPC function in the case where an exact zero is involved. (This also affects some results for cpow; when we start testing cpow in all rounding modes, I think it will be most appropriate to make those tests use IGNORE_ZERO_INF_SIGN, since ISO C does not attempt to determine signs of zero results, or special caes in general, for cpow, and I think signs of zero for cpow are beyond the scope of glibc's accuracy goals.) Simply treating the existing test inputs for fma like those for other functions (i.e., as representing the given value rounded up or down to any of the supported floating-point formats) increases the size of auto-libm-test-out by about 16MB (i.e., about half the file is fma test data). While rounded versions of tests are perfectly reasonable test inputs for fma, in this case having them seems excessive, so this patch allows functions to specify in gen-auto-libm-tests that the given test inputs are only to be interpreted exactly, not as corresponding to values rounded up and down. This reduces the size of the generated test data for fma to a more reasonable 2MB. A consequence of this patch is that fma is now tested for correct presence or absence of "inexact" exceptions, where previously this wasn't tested because I didn't want to try to add that test coverage manually to all the existing tests. As far as I know, the existing fma implementations are already correct in this regard. This patch provides the first cases where the gen-auto-libm-tests support for distinguishing before-rounding/after-rounding underflow actually produces separate entries in auto-libm-test-out (for functions without exactly determined results, the affected cases are all considered underflow-optional, so this only affects functions like fma with exactly determined results). I didn't see any signs of problems with this logic in the output. Tested x86_64 and x86. * math/auto-libm-test-in: Add tests of fma. * math/auto-libm-test-out: Regenerated. * math/libm-test.inc (fma_test_data): Use AUTO_TESTS_fff_f. (fma_towardzero_test_data): Likewise. (fma_downward_test_data): Likewise. (fma_upward_test_data): Likewise. * math/gen-auto-libm-tests.c (rounding_mode_desc): Add field mpc_mode. (rounding_modes): Add values for new field. (func_calc_method): Add value mpfr_fff_f. (func_calc_desc): Add mpfr_fff_f union field. (test_function): Add field exact_args. (FUNC): Add macro argument EXACT_ARGS. (FUNC_mpfr_f_f): Update call to FUNC. (FUNC_mpfr_f_f): Likewise. (FUNC_mpfr_ff_f): Likewise. (FUNC_mpfr_if_f): Likewise. (FUNC_mpc_c_f): Likewise. (FUNC_mpc_c_c): Likewise. (test_functions): Add fma. Update calls to FUNC. (handle_input_arg): Add argument exact_args. (add_test): Update call to handle_input_arg. (calc_generic_results): Add argument mode. Handle mpfr_fff_f. (output_for_one_input_case): Update call to calc_generic_results. Recalculate exact zero results in each rounding mode.
2014-02-18 21:48:51 +00:00
false, CALC (mpc_c_f, MPFR_FUNC))
Move various TEST_c_c tests from libm-test.inc to auto-libm-test-inc. This patch moves tests of ccos, ccosh, cexp, clog, csqrt, ctan and ctanh to auto-libm-test-in, adding the required support to gen-auto-libm-tests. Other TEST_c_c functions aren't moved for now (although the relevant table entries are put in gen-auto-libm-tests for it to know how to handle them): clog10 because of a known MPC bug causing it to hang for at least some pure imaginary inputs (fixed in SVN, but I'd rather not rely on unreleased versions of MPFR or MPC even if relying on very recent releases); the inverse trig and hyperbolic functions because of known slowness in special cases; and csin / csinh because of observed slowness that I need to investigate and report to the MPC maintainers. Slowness can be bypassed by moving to incremental generation (only for new / changed tests) rather than regenerating the whole of auto-libm-test-out every time, but that needs implementing. (This patch takes the time for running gen-auto-libm-tests from about one second to seven, on my system, which I think is reasonable. The slow functions would make it take several minutes at least, which seems unreasonable.) Tested x86_64 and x86 and ulps updated accordingly. * math/auto-libm-test-in: Add tests of ccos, ccosh, cexp, clog, csqrt, ctan and ctanh. * math/auto-libm-test-out: Regenerated. * math/libm-test.inc (TEST_COND_x86_64): New macro. (TEST_COND_x86): Likewise. (ccos_test_data): Use AUTO_TESTS_c_c. (ccosh_test_data): Likewise. (cexp_test_data): Likewise. (clog_test_data): Likewise. (csqrt_test_data): Likewise. (ctan_test_data): Likewise. (ctan_tonearest_test_data): Likewise. (ctan_towardzero_test_data): Likewise. (ctan_downward_test_data): Likewise. (ctan_upward_test_data): Likewise. (ctanh_test_data): Likewise. (ctanh_tonearest_test_data): Likewise. (ctanh_towardzero_test_data): Likewise. (ctanh_downward_test_data): Likewise. (ctanh_upward_test_data): Likewise. * math/gen-auto-libm-tests.c (func_calc_method): Add value mpc_c_c. (func_calc_desc): Add mpc_c_c union field. (FUNC_mpc_c_c): New macro. (test_functions): Add cacos, cacosh, casin, casinh, catan, catanh, ccos, ccosh, cexp, clog, clog10, csin, csinh, csqrt, ctan and ctanh. (special_fill_min_subnorm_p120): New function. (special_real_inputs): Add min_subnorm_p120. (calc_generic_results): Handle mpc_c_c. * sysdeps/i386/fpu/libm-test-ulps: Update. * sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
2013-12-20 12:32:44 +00:00
#define FUNC_mpc_c_c(NAME, MPFR_FUNC, EXACT) \
FUNC (NAME, ARGS2 (type_fp, type_fp), RET2 (type_fp, type_fp), EXACT, \
Move tests of fma from libm-test.inc to auto-libm-test-in. This patch moves tests of fma to auto-libm-test-in, adding the required support to gen-auto-libm-tests. Because fma can have exact zero results depending on the rounding mode, results of fma cannot always be determined from a single value computed in higher precision with a sticky bit. Thus, this patch adds support for recomputing results with the original MPFR/MPC function in the case where an exact zero is involved. (This also affects some results for cpow; when we start testing cpow in all rounding modes, I think it will be most appropriate to make those tests use IGNORE_ZERO_INF_SIGN, since ISO C does not attempt to determine signs of zero results, or special caes in general, for cpow, and I think signs of zero for cpow are beyond the scope of glibc's accuracy goals.) Simply treating the existing test inputs for fma like those for other functions (i.e., as representing the given value rounded up or down to any of the supported floating-point formats) increases the size of auto-libm-test-out by about 16MB (i.e., about half the file is fma test data). While rounded versions of tests are perfectly reasonable test inputs for fma, in this case having them seems excessive, so this patch allows functions to specify in gen-auto-libm-tests that the given test inputs are only to be interpreted exactly, not as corresponding to values rounded up and down. This reduces the size of the generated test data for fma to a more reasonable 2MB. A consequence of this patch is that fma is now tested for correct presence or absence of "inexact" exceptions, where previously this wasn't tested because I didn't want to try to add that test coverage manually to all the existing tests. As far as I know, the existing fma implementations are already correct in this regard. This patch provides the first cases where the gen-auto-libm-tests support for distinguishing before-rounding/after-rounding underflow actually produces separate entries in auto-libm-test-out (for functions without exactly determined results, the affected cases are all considered underflow-optional, so this only affects functions like fma with exactly determined results). I didn't see any signs of problems with this logic in the output. Tested x86_64 and x86. * math/auto-libm-test-in: Add tests of fma. * math/auto-libm-test-out: Regenerated. * math/libm-test.inc (fma_test_data): Use AUTO_TESTS_fff_f. (fma_towardzero_test_data): Likewise. (fma_downward_test_data): Likewise. (fma_upward_test_data): Likewise. * math/gen-auto-libm-tests.c (rounding_mode_desc): Add field mpc_mode. (rounding_modes): Add values for new field. (func_calc_method): Add value mpfr_fff_f. (func_calc_desc): Add mpfr_fff_f union field. (test_function): Add field exact_args. (FUNC): Add macro argument EXACT_ARGS. (FUNC_mpfr_f_f): Update call to FUNC. (FUNC_mpfr_f_f): Likewise. (FUNC_mpfr_ff_f): Likewise. (FUNC_mpfr_if_f): Likewise. (FUNC_mpc_c_f): Likewise. (FUNC_mpc_c_c): Likewise. (test_functions): Add fma. Update calls to FUNC. (handle_input_arg): Add argument exact_args. (add_test): Update call to handle_input_arg. (calc_generic_results): Add argument mode. Handle mpfr_fff_f. (output_for_one_input_case): Update call to calc_generic_results. Recalculate exact zero results in each rounding mode.
2014-02-18 21:48:51 +00:00
true, false, CALC (mpc_c_c, MPFR_FUNC))
/* List of functions handled by this program. */
static test_function test_functions[] =
{
FUNC_mpfr_f_f ("acos", mpfr_acos, false),
FUNC_mpfr_f_f ("acosh", mpfr_acosh, false),
Add narrowing add functions. This patch adds the narrowing add functions from TS 18661-1 to glibc's libm: fadd, faddl, daddl, f32addf64, f32addf32x, f32xaddf64 for all configurations; f32addf64x, f32addf128, f64addf64x, f64addf128, f32xaddf64x, f32xaddf128, f64xaddf128 for configurations with _Float64x and _Float128; __nldbl_daddl for ldbl-opt. As discussed for the build infrastructure patch, tgmath.h support is deliberately deferred, and FP_FAST_* macros are not applicable without optimized function implementations. Function implementations are added for all relevant pairs of formats (including certain cases of a format and itself where more than one type has that format). The main implementations use round-to-odd, or a trivial computation in the case where both formats are the same or where the wider format is IBM long double (in which case we don't attempt to be correctly rounding). The sysdeps/ieee754/soft-fp implementations use soft-fp, and are used automatically for configurations without exceptions and rounding modes by virtue of existing Implies files. As previously discussed, optimized versions for particular architectures are possible, but not included. i386 gets a special version of f32xaddf64 to avoid problems with double rounding (similar to the existing fdim version), since this function must round just once without an intermediate rounding to long double. (No such special version is needed for any other function, because the nontrivial functions use round-to-odd, which does the intermediate computation with the rounding mode set to round-to-zero, and double rounding is OK except in round-to-nearest mode, so is OK for that intermediate round-to-zero computation.) mul and div will need slightly different special versions for i386 (using round-to-odd on long double instead of precision control) because of the possibility of inexact intermediate results in the subnormal range for double. To reduce duplication among the different function implementations, math-narrow.h gets macros CHECK_NARROW_ADD, NARROW_ADD_ROUND_TO_ODD and NARROW_ADD_TRIVIAL. In the trivial cases and for any architecture-specific optimized implementations, the overhead of the errno setting might be significant, but I think that's best handled through compiler built-in functions rather than providing separate no-errno versions in glibc (and likewise there are no __*_finite entry points for these function provided, __*_finite effectively being no-errno versions at present in most cases). Tested for x86_64 and x86, with both GCC 6 and GCC 7. Tested for mips64 (all three ABIs, both hard and soft float) and powerpc with GCC 7. Tested with build-many-glibcs.py with both GCC 6 and GCC 7. * math/Makefile (libm-narrow-fns): Add add. (libm-test-funcs-narrow): Likewise. * math/Versions (GLIBC_2.28): Add narrowing add functions. * math/bits/mathcalls-narrow.h (add): Use __MATHCALL_NARROW . * math/gen-auto-libm-tests.c (test_functions): Add add. * math/math-narrow.h (CHECK_NARROW_ADD): New macro. (NARROW_ADD_ROUND_TO_ODD): Likewise. (NARROW_ADD_TRIVIAL): Likewise. * sysdeps/ieee754/float128/float128_private.h (__faddl): New macro. (__daddl): Likewise. * sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add fadd and dadd. (CFLAGS-nldbl-dadd.c): New variable. (CFLAGS-nldbl-fadd.c): Likewise. * sysdeps/ieee754/ldbl-opt/Versions (GLIBC_2.28): Add __nldbl_daddl. * sysdeps/ieee754/ldbl-opt/nldbl-compat.h (__nldbl_daddl): New prototype. * manual/arith.texi (Misc FP Arithmetic): Document fadd, faddl, daddl, fMaddfN, fMaddfNx, fMxaddfN and fMxaddfNx. * math/auto-libm-test-in: Add tests of add. * math/auto-libm-test-out-narrow-add: New generated file. * math/libm-test-narrow-add.inc: New file. * sysdeps/i386/fpu/s_f32xaddf64.c: Likewise. * sysdeps/ieee754/dbl-64/s_f32xaddf64.c: Likewise. * sysdeps/ieee754/dbl-64/s_fadd.c: Likewise. * sysdeps/ieee754/float128/s_f32addf128.c: Likewise. * sysdeps/ieee754/float128/s_f64addf128.c: Likewise. * sysdeps/ieee754/float128/s_f64xaddf128.c: Likewise. * sysdeps/ieee754/ldbl-128/s_daddl.c: Likewise. * sysdeps/ieee754/ldbl-128/s_f64xaddf128.c: Likewise. * sysdeps/ieee754/ldbl-128/s_faddl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_daddl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_faddl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_daddl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_faddl.c: Likewise. * sysdeps/ieee754/ldbl-opt/nldbl-dadd.c: Likewise. * sysdeps/ieee754/ldbl-opt/nldbl-fadd.c: Likewise. * sysdeps/ieee754/soft-fp/s_daddl.c: Likewise. * sysdeps/ieee754/soft-fp/s_fadd.c: Likewise. * sysdeps/ieee754/soft-fp/s_faddl.c: Likewise. * sysdeps/powerpc/fpu/libm-test-ulps: Update. * sysdeps/mach/hurd/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/riscv/rv64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
2018-02-10 02:08:43 +00:00
FUNC_mpfr_ff_f ("add", mpfr_add, true),
FUNC_mpfr_f_f ("asin", mpfr_asin, false),
FUNC_mpfr_f_f ("asinh", mpfr_asinh, false),
FUNC_mpfr_f_f ("atan", mpfr_atan, false),
FUNC_mpfr_ff_f ("atan2", mpfr_atan2, false),
FUNC_mpfr_f_f ("atanh", mpfr_atanh, false),
FUNC_mpc_c_f ("cabs", mpc_abs, false),
Move various TEST_c_c tests from libm-test.inc to auto-libm-test-inc. This patch moves tests of ccos, ccosh, cexp, clog, csqrt, ctan and ctanh to auto-libm-test-in, adding the required support to gen-auto-libm-tests. Other TEST_c_c functions aren't moved for now (although the relevant table entries are put in gen-auto-libm-tests for it to know how to handle them): clog10 because of a known MPC bug causing it to hang for at least some pure imaginary inputs (fixed in SVN, but I'd rather not rely on unreleased versions of MPFR or MPC even if relying on very recent releases); the inverse trig and hyperbolic functions because of known slowness in special cases; and csin / csinh because of observed slowness that I need to investigate and report to the MPC maintainers. Slowness can be bypassed by moving to incremental generation (only for new / changed tests) rather than regenerating the whole of auto-libm-test-out every time, but that needs implementing. (This patch takes the time for running gen-auto-libm-tests from about one second to seven, on my system, which I think is reasonable. The slow functions would make it take several minutes at least, which seems unreasonable.) Tested x86_64 and x86 and ulps updated accordingly. * math/auto-libm-test-in: Add tests of ccos, ccosh, cexp, clog, csqrt, ctan and ctanh. * math/auto-libm-test-out: Regenerated. * math/libm-test.inc (TEST_COND_x86_64): New macro. (TEST_COND_x86): Likewise. (ccos_test_data): Use AUTO_TESTS_c_c. (ccosh_test_data): Likewise. (cexp_test_data): Likewise. (clog_test_data): Likewise. (csqrt_test_data): Likewise. (ctan_test_data): Likewise. (ctan_tonearest_test_data): Likewise. (ctan_towardzero_test_data): Likewise. (ctan_downward_test_data): Likewise. (ctan_upward_test_data): Likewise. (ctanh_test_data): Likewise. (ctanh_tonearest_test_data): Likewise. (ctanh_towardzero_test_data): Likewise. (ctanh_downward_test_data): Likewise. (ctanh_upward_test_data): Likewise. * math/gen-auto-libm-tests.c (func_calc_method): Add value mpc_c_c. (func_calc_desc): Add mpc_c_c union field. (FUNC_mpc_c_c): New macro. (test_functions): Add cacos, cacosh, casin, casinh, catan, catanh, ccos, ccosh, cexp, clog, clog10, csin, csinh, csqrt, ctan and ctanh. (special_fill_min_subnorm_p120): New function. (special_real_inputs): Add min_subnorm_p120. (calc_generic_results): Handle mpc_c_c. * sysdeps/i386/fpu/libm-test-ulps: Update. * sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
2013-12-20 12:32:44 +00:00
FUNC_mpc_c_c ("cacos", mpc_acos, false),
FUNC_mpc_c_c ("cacosh", mpc_acosh, false),
FUNC_mpc_c_f ("carg", mpc_arg, false),
Move various TEST_c_c tests from libm-test.inc to auto-libm-test-inc. This patch moves tests of ccos, ccosh, cexp, clog, csqrt, ctan and ctanh to auto-libm-test-in, adding the required support to gen-auto-libm-tests. Other TEST_c_c functions aren't moved for now (although the relevant table entries are put in gen-auto-libm-tests for it to know how to handle them): clog10 because of a known MPC bug causing it to hang for at least some pure imaginary inputs (fixed in SVN, but I'd rather not rely on unreleased versions of MPFR or MPC even if relying on very recent releases); the inverse trig and hyperbolic functions because of known slowness in special cases; and csin / csinh because of observed slowness that I need to investigate and report to the MPC maintainers. Slowness can be bypassed by moving to incremental generation (only for new / changed tests) rather than regenerating the whole of auto-libm-test-out every time, but that needs implementing. (This patch takes the time for running gen-auto-libm-tests from about one second to seven, on my system, which I think is reasonable. The slow functions would make it take several minutes at least, which seems unreasonable.) Tested x86_64 and x86 and ulps updated accordingly. * math/auto-libm-test-in: Add tests of ccos, ccosh, cexp, clog, csqrt, ctan and ctanh. * math/auto-libm-test-out: Regenerated. * math/libm-test.inc (TEST_COND_x86_64): New macro. (TEST_COND_x86): Likewise. (ccos_test_data): Use AUTO_TESTS_c_c. (ccosh_test_data): Likewise. (cexp_test_data): Likewise. (clog_test_data): Likewise. (csqrt_test_data): Likewise. (ctan_test_data): Likewise. (ctan_tonearest_test_data): Likewise. (ctan_towardzero_test_data): Likewise. (ctan_downward_test_data): Likewise. (ctan_upward_test_data): Likewise. (ctanh_test_data): Likewise. (ctanh_tonearest_test_data): Likewise. (ctanh_towardzero_test_data): Likewise. (ctanh_downward_test_data): Likewise. (ctanh_upward_test_data): Likewise. * math/gen-auto-libm-tests.c (func_calc_method): Add value mpc_c_c. (func_calc_desc): Add mpc_c_c union field. (FUNC_mpc_c_c): New macro. (test_functions): Add cacos, cacosh, casin, casinh, catan, catanh, ccos, ccosh, cexp, clog, clog10, csin, csinh, csqrt, ctan and ctanh. (special_fill_min_subnorm_p120): New function. (special_real_inputs): Add min_subnorm_p120. (calc_generic_results): Handle mpc_c_c. * sysdeps/i386/fpu/libm-test-ulps: Update. * sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
2013-12-20 12:32:44 +00:00
FUNC_mpc_c_c ("casin", mpc_asin, false),
FUNC_mpc_c_c ("casinh", mpc_asinh, false),
FUNC_mpc_c_c ("catan", mpc_atan, false),
FUNC_mpc_c_c ("catanh", mpc_atanh, false),
FUNC_mpfr_f_f ("cbrt", mpfr_cbrt, false),
Move various TEST_c_c tests from libm-test.inc to auto-libm-test-inc. This patch moves tests of ccos, ccosh, cexp, clog, csqrt, ctan and ctanh to auto-libm-test-in, adding the required support to gen-auto-libm-tests. Other TEST_c_c functions aren't moved for now (although the relevant table entries are put in gen-auto-libm-tests for it to know how to handle them): clog10 because of a known MPC bug causing it to hang for at least some pure imaginary inputs (fixed in SVN, but I'd rather not rely on unreleased versions of MPFR or MPC even if relying on very recent releases); the inverse trig and hyperbolic functions because of known slowness in special cases; and csin / csinh because of observed slowness that I need to investigate and report to the MPC maintainers. Slowness can be bypassed by moving to incremental generation (only for new / changed tests) rather than regenerating the whole of auto-libm-test-out every time, but that needs implementing. (This patch takes the time for running gen-auto-libm-tests from about one second to seven, on my system, which I think is reasonable. The slow functions would make it take several minutes at least, which seems unreasonable.) Tested x86_64 and x86 and ulps updated accordingly. * math/auto-libm-test-in: Add tests of ccos, ccosh, cexp, clog, csqrt, ctan and ctanh. * math/auto-libm-test-out: Regenerated. * math/libm-test.inc (TEST_COND_x86_64): New macro. (TEST_COND_x86): Likewise. (ccos_test_data): Use AUTO_TESTS_c_c. (ccosh_test_data): Likewise. (cexp_test_data): Likewise. (clog_test_data): Likewise. (csqrt_test_data): Likewise. (ctan_test_data): Likewise. (ctan_tonearest_test_data): Likewise. (ctan_towardzero_test_data): Likewise. (ctan_downward_test_data): Likewise. (ctan_upward_test_data): Likewise. (ctanh_test_data): Likewise. (ctanh_tonearest_test_data): Likewise. (ctanh_towardzero_test_data): Likewise. (ctanh_downward_test_data): Likewise. (ctanh_upward_test_data): Likewise. * math/gen-auto-libm-tests.c (func_calc_method): Add value mpc_c_c. (func_calc_desc): Add mpc_c_c union field. (FUNC_mpc_c_c): New macro. (test_functions): Add cacos, cacosh, casin, casinh, catan, catanh, ccos, ccosh, cexp, clog, clog10, csin, csinh, csqrt, ctan and ctanh. (special_fill_min_subnorm_p120): New function. (special_real_inputs): Add min_subnorm_p120. (calc_generic_results): Handle mpc_c_c. * sysdeps/i386/fpu/libm-test-ulps: Update. * sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
2013-12-20 12:32:44 +00:00
FUNC_mpc_c_c ("ccos", mpc_cos, false),
FUNC_mpc_c_c ("ccosh", mpc_cosh, false),
FUNC_mpc_c_c ("cexp", mpc_exp, false),
FUNC_mpc_c_c ("clog", mpc_log, false),
FUNC_mpc_c_c ("clog10", mpc_log10, false),
FUNC_mpfr_f_f ("cos", mpfr_cos, false),
FUNC_mpfr_f_f ("cosh", mpfr_cosh, false),
FUNC ("cpow", ARGS4 (type_fp, type_fp, type_fp, type_fp),
Move tests of fma from libm-test.inc to auto-libm-test-in. This patch moves tests of fma to auto-libm-test-in, adding the required support to gen-auto-libm-tests. Because fma can have exact zero results depending on the rounding mode, results of fma cannot always be determined from a single value computed in higher precision with a sticky bit. Thus, this patch adds support for recomputing results with the original MPFR/MPC function in the case where an exact zero is involved. (This also affects some results for cpow; when we start testing cpow in all rounding modes, I think it will be most appropriate to make those tests use IGNORE_ZERO_INF_SIGN, since ISO C does not attempt to determine signs of zero results, or special caes in general, for cpow, and I think signs of zero for cpow are beyond the scope of glibc's accuracy goals.) Simply treating the existing test inputs for fma like those for other functions (i.e., as representing the given value rounded up or down to any of the supported floating-point formats) increases the size of auto-libm-test-out by about 16MB (i.e., about half the file is fma test data). While rounded versions of tests are perfectly reasonable test inputs for fma, in this case having them seems excessive, so this patch allows functions to specify in gen-auto-libm-tests that the given test inputs are only to be interpreted exactly, not as corresponding to values rounded up and down. This reduces the size of the generated test data for fma to a more reasonable 2MB. A consequence of this patch is that fma is now tested for correct presence or absence of "inexact" exceptions, where previously this wasn't tested because I didn't want to try to add that test coverage manually to all the existing tests. As far as I know, the existing fma implementations are already correct in this regard. This patch provides the first cases where the gen-auto-libm-tests support for distinguishing before-rounding/after-rounding underflow actually produces separate entries in auto-libm-test-out (for functions without exactly determined results, the affected cases are all considered underflow-optional, so this only affects functions like fma with exactly determined results). I didn't see any signs of problems with this logic in the output. Tested x86_64 and x86. * math/auto-libm-test-in: Add tests of fma. * math/auto-libm-test-out: Regenerated. * math/libm-test.inc (fma_test_data): Use AUTO_TESTS_fff_f. (fma_towardzero_test_data): Likewise. (fma_downward_test_data): Likewise. (fma_upward_test_data): Likewise. * math/gen-auto-libm-tests.c (rounding_mode_desc): Add field mpc_mode. (rounding_modes): Add values for new field. (func_calc_method): Add value mpfr_fff_f. (func_calc_desc): Add mpfr_fff_f union field. (test_function): Add field exact_args. (FUNC): Add macro argument EXACT_ARGS. (FUNC_mpfr_f_f): Update call to FUNC. (FUNC_mpfr_f_f): Likewise. (FUNC_mpfr_ff_f): Likewise. (FUNC_mpfr_if_f): Likewise. (FUNC_mpc_c_f): Likewise. (FUNC_mpc_c_c): Likewise. (test_functions): Add fma. Update calls to FUNC. (handle_input_arg): Add argument exact_args. (add_test): Update call to handle_input_arg. (calc_generic_results): Add argument mode. Handle mpfr_fff_f. (output_for_one_input_case): Update call to calc_generic_results. Recalculate exact zero results in each rounding mode.
2014-02-18 21:48:51 +00:00
RET2 (type_fp, type_fp), false, true, false,
CALC (mpc_cc_c, mpc_pow)),
Move various TEST_c_c tests from libm-test.inc to auto-libm-test-inc. This patch moves tests of ccos, ccosh, cexp, clog, csqrt, ctan and ctanh to auto-libm-test-in, adding the required support to gen-auto-libm-tests. Other TEST_c_c functions aren't moved for now (although the relevant table entries are put in gen-auto-libm-tests for it to know how to handle them): clog10 because of a known MPC bug causing it to hang for at least some pure imaginary inputs (fixed in SVN, but I'd rather not rely on unreleased versions of MPFR or MPC even if relying on very recent releases); the inverse trig and hyperbolic functions because of known slowness in special cases; and csin / csinh because of observed slowness that I need to investigate and report to the MPC maintainers. Slowness can be bypassed by moving to incremental generation (only for new / changed tests) rather than regenerating the whole of auto-libm-test-out every time, but that needs implementing. (This patch takes the time for running gen-auto-libm-tests from about one second to seven, on my system, which I think is reasonable. The slow functions would make it take several minutes at least, which seems unreasonable.) Tested x86_64 and x86 and ulps updated accordingly. * math/auto-libm-test-in: Add tests of ccos, ccosh, cexp, clog, csqrt, ctan and ctanh. * math/auto-libm-test-out: Regenerated. * math/libm-test.inc (TEST_COND_x86_64): New macro. (TEST_COND_x86): Likewise. (ccos_test_data): Use AUTO_TESTS_c_c. (ccosh_test_data): Likewise. (cexp_test_data): Likewise. (clog_test_data): Likewise. (csqrt_test_data): Likewise. (ctan_test_data): Likewise. (ctan_tonearest_test_data): Likewise. (ctan_towardzero_test_data): Likewise. (ctan_downward_test_data): Likewise. (ctan_upward_test_data): Likewise. (ctanh_test_data): Likewise. (ctanh_tonearest_test_data): Likewise. (ctanh_towardzero_test_data): Likewise. (ctanh_downward_test_data): Likewise. (ctanh_upward_test_data): Likewise. * math/gen-auto-libm-tests.c (func_calc_method): Add value mpc_c_c. (func_calc_desc): Add mpc_c_c union field. (FUNC_mpc_c_c): New macro. (test_functions): Add cacos, cacosh, casin, casinh, catan, catanh, ccos, ccosh, cexp, clog, clog10, csin, csinh, csqrt, ctan and ctanh. (special_fill_min_subnorm_p120): New function. (special_real_inputs): Add min_subnorm_p120. (calc_generic_results): Handle mpc_c_c. * sysdeps/i386/fpu/libm-test-ulps: Update. * sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
2013-12-20 12:32:44 +00:00
FUNC_mpc_c_c ("csin", mpc_sin, false),
FUNC_mpc_c_c ("csinh", mpc_sinh, false),
FUNC_mpc_c_c ("csqrt", mpc_sqrt, false),
FUNC_mpc_c_c ("ctan", mpc_tan, false),
FUNC_mpc_c_c ("ctanh", mpc_tanh, false),
Add narrowing divide functions. This patch adds the narrowing divide functions from TS 18661-1 to glibc's libm: fdiv, fdivl, ddivl, f32divf64, f32divf32x, f32xdivf64 for all configurations; f32divf64x, f32divf128, f64divf64x, f64divf128, f32xdivf64x, f32xdivf128, f64xdivf128 for configurations with _Float64x and _Float128; __nldbl_ddivl for ldbl-opt. The changes are mostly essentially the same as for the other narrowing functions, so the description of those generally applies to this patch as well. Tested for x86_64, x86, mips64 (all three ABIs, both hard and soft float) and powerpc, and with build-many-glibcs.py. * math/Makefile (libm-narrow-fns): Add div. (libm-test-funcs-narrow): Likewise. * math/Versions (GLIBC_2.28): Add narrowing divide functions. * math/bits/mathcalls-narrow.h (div): Use __MATHCALL_NARROW. * math/gen-auto-libm-tests.c (test_functions): Add div. * math/math-narrow.h (CHECK_NARROW_DIV): New macro. (NARROW_DIV_ROUND_TO_ODD): Likewise. (NARROW_DIV_TRIVIAL): Likewise. * sysdeps/ieee754/float128/float128_private.h (__fdivl): New macro. (__ddivl): Likewise. * sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add fdiv and ddiv. (CFLAGS-nldbl-ddiv.c): New variable. (CFLAGS-nldbl-fdiv.c): Likewise. * sysdeps/ieee754/ldbl-opt/Versions (GLIBC_2.28): Add __nldbl_ddivl. * sysdeps/ieee754/ldbl-opt/nldbl-compat.h (__nldbl_ddivl): New prototype. * manual/arith.texi (Misc FP Arithmetic): Document fdiv, fdivl, ddivl, fMdivfN, fMdivfNx, fMxdivfN and fMxdivfNx. * math/auto-libm-test-in: Add tests of div. * math/auto-libm-test-out-narrow-div: New generated file. * math/libm-test-narrow-div.inc: New file. * sysdeps/i386/fpu/s_f32xdivf64.c: Likewise. * sysdeps/ieee754/dbl-64/s_f32xdivf64.c: Likewise. * sysdeps/ieee754/dbl-64/s_fdiv.c: Likewise. * sysdeps/ieee754/float128/s_f32divf128.c: Likewise. * sysdeps/ieee754/float128/s_f64divf128.c: Likewise. * sysdeps/ieee754/float128/s_f64xdivf128.c: Likewise. * sysdeps/ieee754/ldbl-128/s_ddivl.c: Likewise. * sysdeps/ieee754/ldbl-128/s_f64xdivf128.c: Likewise. * sysdeps/ieee754/ldbl-128/s_fdivl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_ddivl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_fdivl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_ddivl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_fdivl.c: Likewise. * sysdeps/ieee754/ldbl-opt/nldbl-ddiv.c: Likewise. * sysdeps/ieee754/ldbl-opt/nldbl-fdiv.c: Likewise. * sysdeps/ieee754/soft-fp/s_ddivl.c: Likewise. * sysdeps/ieee754/soft-fp/s_fdiv.c: Likewise. * sysdeps/ieee754/soft-fp/s_fdivl.c: Likewise. * sysdeps/powerpc/fpu/libm-test-ulps: Update. * sysdeps/mach/hurd/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/riscv/rv64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
2018-05-17 00:40:52 +00:00
FUNC_mpfr_ff_f ("div", mpfr_div, true),
FUNC_mpfr_f_f ("erf", mpfr_erf, false),
FUNC_mpfr_f_f ("erfc", mpfr_erfc, false),
FUNC_mpfr_f_f ("exp", mpfr_exp, false),
FUNC_mpfr_f_f ("exp10", mpfr_exp10, false),
FUNC_mpfr_f_f ("exp2", mpfr_exp2, false),
FUNC_mpfr_f_f ("expm1", mpfr_expm1, false),
Move tests of fma from libm-test.inc to auto-libm-test-in. This patch moves tests of fma to auto-libm-test-in, adding the required support to gen-auto-libm-tests. Because fma can have exact zero results depending on the rounding mode, results of fma cannot always be determined from a single value computed in higher precision with a sticky bit. Thus, this patch adds support for recomputing results with the original MPFR/MPC function in the case where an exact zero is involved. (This also affects some results for cpow; when we start testing cpow in all rounding modes, I think it will be most appropriate to make those tests use IGNORE_ZERO_INF_SIGN, since ISO C does not attempt to determine signs of zero results, or special caes in general, for cpow, and I think signs of zero for cpow are beyond the scope of glibc's accuracy goals.) Simply treating the existing test inputs for fma like those for other functions (i.e., as representing the given value rounded up or down to any of the supported floating-point formats) increases the size of auto-libm-test-out by about 16MB (i.e., about half the file is fma test data). While rounded versions of tests are perfectly reasonable test inputs for fma, in this case having them seems excessive, so this patch allows functions to specify in gen-auto-libm-tests that the given test inputs are only to be interpreted exactly, not as corresponding to values rounded up and down. This reduces the size of the generated test data for fma to a more reasonable 2MB. A consequence of this patch is that fma is now tested for correct presence or absence of "inexact" exceptions, where previously this wasn't tested because I didn't want to try to add that test coverage manually to all the existing tests. As far as I know, the existing fma implementations are already correct in this regard. This patch provides the first cases where the gen-auto-libm-tests support for distinguishing before-rounding/after-rounding underflow actually produces separate entries in auto-libm-test-out (for functions without exactly determined results, the affected cases are all considered underflow-optional, so this only affects functions like fma with exactly determined results). I didn't see any signs of problems with this logic in the output. Tested x86_64 and x86. * math/auto-libm-test-in: Add tests of fma. * math/auto-libm-test-out: Regenerated. * math/libm-test.inc (fma_test_data): Use AUTO_TESTS_fff_f. (fma_towardzero_test_data): Likewise. (fma_downward_test_data): Likewise. (fma_upward_test_data): Likewise. * math/gen-auto-libm-tests.c (rounding_mode_desc): Add field mpc_mode. (rounding_modes): Add values for new field. (func_calc_method): Add value mpfr_fff_f. (func_calc_desc): Add mpfr_fff_f union field. (test_function): Add field exact_args. (FUNC): Add macro argument EXACT_ARGS. (FUNC_mpfr_f_f): Update call to FUNC. (FUNC_mpfr_f_f): Likewise. (FUNC_mpfr_ff_f): Likewise. (FUNC_mpfr_if_f): Likewise. (FUNC_mpc_c_f): Likewise. (FUNC_mpc_c_c): Likewise. (test_functions): Add fma. Update calls to FUNC. (handle_input_arg): Add argument exact_args. (add_test): Update call to handle_input_arg. (calc_generic_results): Add argument mode. Handle mpfr_fff_f. (output_for_one_input_case): Update call to calc_generic_results. Recalculate exact zero results in each rounding mode.
2014-02-18 21:48:51 +00:00
FUNC ("fma", ARGS3 (type_fp, type_fp, type_fp), RET1 (type_fp),
true, false, true, CALC (mpfr_fff_f, mpfr_fma)),
FUNC_mpfr_ff_f ("hypot", mpfr_hypot, false),
FUNC_mpfr_f_f ("j0", mpfr_j0, false),
FUNC_mpfr_f_f ("j1", mpfr_j1, false),
FUNC_mpfr_if_f ("jn", mpfr_jn, false),
FUNC ("lgamma", ARGS1 (type_fp), RET2 (type_fp, type_int), false, false,
Move tests of fma from libm-test.inc to auto-libm-test-in. This patch moves tests of fma to auto-libm-test-in, adding the required support to gen-auto-libm-tests. Because fma can have exact zero results depending on the rounding mode, results of fma cannot always be determined from a single value computed in higher precision with a sticky bit. Thus, this patch adds support for recomputing results with the original MPFR/MPC function in the case where an exact zero is involved. (This also affects some results for cpow; when we start testing cpow in all rounding modes, I think it will be most appropriate to make those tests use IGNORE_ZERO_INF_SIGN, since ISO C does not attempt to determine signs of zero results, or special caes in general, for cpow, and I think signs of zero for cpow are beyond the scope of glibc's accuracy goals.) Simply treating the existing test inputs for fma like those for other functions (i.e., as representing the given value rounded up or down to any of the supported floating-point formats) increases the size of auto-libm-test-out by about 16MB (i.e., about half the file is fma test data). While rounded versions of tests are perfectly reasonable test inputs for fma, in this case having them seems excessive, so this patch allows functions to specify in gen-auto-libm-tests that the given test inputs are only to be interpreted exactly, not as corresponding to values rounded up and down. This reduces the size of the generated test data for fma to a more reasonable 2MB. A consequence of this patch is that fma is now tested for correct presence or absence of "inexact" exceptions, where previously this wasn't tested because I didn't want to try to add that test coverage manually to all the existing tests. As far as I know, the existing fma implementations are already correct in this regard. This patch provides the first cases where the gen-auto-libm-tests support for distinguishing before-rounding/after-rounding underflow actually produces separate entries in auto-libm-test-out (for functions without exactly determined results, the affected cases are all considered underflow-optional, so this only affects functions like fma with exactly determined results). I didn't see any signs of problems with this logic in the output. Tested x86_64 and x86. * math/auto-libm-test-in: Add tests of fma. * math/auto-libm-test-out: Regenerated. * math/libm-test.inc (fma_test_data): Use AUTO_TESTS_fff_f. (fma_towardzero_test_data): Likewise. (fma_downward_test_data): Likewise. (fma_upward_test_data): Likewise. * math/gen-auto-libm-tests.c (rounding_mode_desc): Add field mpc_mode. (rounding_modes): Add values for new field. (func_calc_method): Add value mpfr_fff_f. (func_calc_desc): Add mpfr_fff_f union field. (test_function): Add field exact_args. (FUNC): Add macro argument EXACT_ARGS. (FUNC_mpfr_f_f): Update call to FUNC. (FUNC_mpfr_f_f): Likewise. (FUNC_mpfr_ff_f): Likewise. (FUNC_mpfr_if_f): Likewise. (FUNC_mpc_c_f): Likewise. (FUNC_mpc_c_c): Likewise. (test_functions): Add fma. Update calls to FUNC. (handle_input_arg): Add argument exact_args. (add_test): Update call to handle_input_arg. (calc_generic_results): Add argument mode. Handle mpfr_fff_f. (output_for_one_input_case): Update call to calc_generic_results. Recalculate exact zero results in each rounding mode.
2014-02-18 21:48:51 +00:00
false, CALC (mpfr_f_f1, mpfr_lgamma)),
FUNC_mpfr_f_f ("log", mpfr_log, false),
FUNC_mpfr_f_f ("log10", mpfr_log10, false),
FUNC_mpfr_f_f ("log1p", mpfr_log1p, false),
FUNC_mpfr_f_f ("log2", mpfr_log2, false),
Add narrowing multiply functions. This patch adds the narrowing multiply functions from TS 18661-1 to glibc's libm: fmul, fmull, dmull, f32mulf64, f32mulf32x, f32xmulf64 for all configurations; f32mulf64x, f32mulf128, f64mulf64x, f64mulf128, f32xmulf64x, f32xmulf128, f64xmulf128 for configurations with _Float64x and _Float128; __nldbl_dmull for ldbl-opt. The changes are mostly essentially the same as for the narrowing add functions, so the description of those generally applies to this patch as well. f32xmulf64 for i386 cannot use precision control as used for add and subtract, because that would result in double rounding for subnormal results, so that uses round-to-odd with long double intermediate result instead. The soft-fp support involves adding a new FP_TRUNC_COOKED since soft-fp multiplication uses cooked inputs and outputs. Tested for x86_64, x86, mips64 (all three ABIs, both hard and soft float) and powerpc, and with build-many-glibcs.py. * math/Makefile (libm-narrow-fns): Add mul. (libm-test-funcs-narrow): Likewise. * math/Versions (GLIBC_2.28): Add narrowing multiply functions. * math/bits/mathcalls-narrow.h (mul): Use __MATHCALL_NARROW. * math/gen-auto-libm-tests.c (test_functions): Add mul. * math/math-narrow.h (CHECK_NARROW_MUL): New macro. (NARROW_MUL_ROUND_TO_ODD): Likewise. (NARROW_MUL_TRIVIAL): Likewise. * soft-fp/op-common.h (FP_TRUNC_COOKED): Likewise. * sysdeps/ieee754/float128/float128_private.h (__fmull): New macro. (__dmull): Likewise. * sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add fmul and dmul. (CFLAGS-nldbl-dmul.c): New variable. (CFLAGS-nldbl-fmul.c): Likewise. * sysdeps/ieee754/ldbl-opt/Versions (GLIBC_2.28): Add __nldbl_dmull. * sysdeps/ieee754/ldbl-opt/nldbl-compat.h (__nldbl_dmull): New prototype. * manual/arith.texi (Misc FP Arithmetic): Document fmul, fmull, dmull, fMmulfN, fMmulfNx, fMxmulfN and fMxmulfNx. * math/auto-libm-test-in: Add tests of mul. * math/auto-libm-test-out-narrow-mul: New generated file. * math/libm-test-narrow-mul.inc: New file. * sysdeps/i386/fpu/s_f32xmulf64.c: Likewise. * sysdeps/ieee754/dbl-64/s_f32xmulf64.c: Likewise. * sysdeps/ieee754/dbl-64/s_fmul.c: Likewise. * sysdeps/ieee754/float128/s_f32mulf128.c: Likewise. * sysdeps/ieee754/float128/s_f64mulf128.c: Likewise. * sysdeps/ieee754/float128/s_f64xmulf128.c: Likewise. * sysdeps/ieee754/ldbl-128/s_dmull.c: Likewise. * sysdeps/ieee754/ldbl-128/s_f64xmulf128.c: Likewise. * sysdeps/ieee754/ldbl-128/s_fmull.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_dmull.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_fmull.c: Likewise. * sysdeps/ieee754/ldbl-96/s_dmull.c: Likewise. * sysdeps/ieee754/ldbl-96/s_fmull.c: Likewise. * sysdeps/ieee754/ldbl-opt/nldbl-dmul.c: Likewise. * sysdeps/ieee754/ldbl-opt/nldbl-fmul.c: Likewise. * sysdeps/ieee754/soft-fp/s_dmull.c: Likewise. * sysdeps/ieee754/soft-fp/s_fmul.c: Likewise. * sysdeps/ieee754/soft-fp/s_fmull.c: Likewise. * sysdeps/powerpc/fpu/libm-test-ulps: Update. * sysdeps/mach/hurd/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/riscv/rv64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
2018-05-16 00:05:28 +00:00
FUNC_mpfr_ff_f ("mul", mpfr_mul, true),
FUNC_mpfr_ff_f ("pow", mpfr_pow, false),
FUNC_mpfr_f_f ("sin", mpfr_sin, false),
FUNC ("sincos", ARGS1 (type_fp), RET2 (type_fp, type_fp), false, false,
Move tests of fma from libm-test.inc to auto-libm-test-in. This patch moves tests of fma to auto-libm-test-in, adding the required support to gen-auto-libm-tests. Because fma can have exact zero results depending on the rounding mode, results of fma cannot always be determined from a single value computed in higher precision with a sticky bit. Thus, this patch adds support for recomputing results with the original MPFR/MPC function in the case where an exact zero is involved. (This also affects some results for cpow; when we start testing cpow in all rounding modes, I think it will be most appropriate to make those tests use IGNORE_ZERO_INF_SIGN, since ISO C does not attempt to determine signs of zero results, or special caes in general, for cpow, and I think signs of zero for cpow are beyond the scope of glibc's accuracy goals.) Simply treating the existing test inputs for fma like those for other functions (i.e., as representing the given value rounded up or down to any of the supported floating-point formats) increases the size of auto-libm-test-out by about 16MB (i.e., about half the file is fma test data). While rounded versions of tests are perfectly reasonable test inputs for fma, in this case having them seems excessive, so this patch allows functions to specify in gen-auto-libm-tests that the given test inputs are only to be interpreted exactly, not as corresponding to values rounded up and down. This reduces the size of the generated test data for fma to a more reasonable 2MB. A consequence of this patch is that fma is now tested for correct presence or absence of "inexact" exceptions, where previously this wasn't tested because I didn't want to try to add that test coverage manually to all the existing tests. As far as I know, the existing fma implementations are already correct in this regard. This patch provides the first cases where the gen-auto-libm-tests support for distinguishing before-rounding/after-rounding underflow actually produces separate entries in auto-libm-test-out (for functions without exactly determined results, the affected cases are all considered underflow-optional, so this only affects functions like fma with exactly determined results). I didn't see any signs of problems with this logic in the output. Tested x86_64 and x86. * math/auto-libm-test-in: Add tests of fma. * math/auto-libm-test-out: Regenerated. * math/libm-test.inc (fma_test_data): Use AUTO_TESTS_fff_f. (fma_towardzero_test_data): Likewise. (fma_downward_test_data): Likewise. (fma_upward_test_data): Likewise. * math/gen-auto-libm-tests.c (rounding_mode_desc): Add field mpc_mode. (rounding_modes): Add values for new field. (func_calc_method): Add value mpfr_fff_f. (func_calc_desc): Add mpfr_fff_f union field. (test_function): Add field exact_args. (FUNC): Add macro argument EXACT_ARGS. (FUNC_mpfr_f_f): Update call to FUNC. (FUNC_mpfr_f_f): Likewise. (FUNC_mpfr_ff_f): Likewise. (FUNC_mpfr_if_f): Likewise. (FUNC_mpc_c_f): Likewise. (FUNC_mpc_c_c): Likewise. (test_functions): Add fma. Update calls to FUNC. (handle_input_arg): Add argument exact_args. (add_test): Update call to handle_input_arg. (calc_generic_results): Add argument mode. Handle mpfr_fff_f. (output_for_one_input_case): Update call to calc_generic_results. Recalculate exact zero results in each rounding mode.
2014-02-18 21:48:51 +00:00
false, CALC (mpfr_f_11, mpfr_sin_cos)),
FUNC_mpfr_f_f ("sinh", mpfr_sinh, false),
Add narrowing subtract functions. This patch adds the narrowing subtract functions from TS 18661-1 to glibc's libm: fsub, fsubl, dsubl, f32subf64, f32subf32x, f32xsubf64 for all configurations; f32subf64x, f32subf128, f64subf64x, f64subf128, f32xsubf64x, f32xsubf128, f64xsubf128 for configurations with _Float64x and _Float128; __nldbl_dsubl for ldbl-opt. The changes are essentially the same as for the narrowing add functions, so the description of those generally applies to this patch as well. Tested for x86_64, x86, mips64 (all three ABIs, both hard and soft float) and powerpc, and with build-many-glibcs.py. * math/Makefile (libm-narrow-fns): Add sub. (libm-test-funcs-narrow): Likewise. * math/Versions (GLIBC_2.28): Add narrowing subtract functions. * math/bits/mathcalls-narrow.h (sub): Use __MATHCALL_NARROW. * math/gen-auto-libm-tests.c (test_functions): Add sub. * math/math-narrow.h (CHECK_NARROW_SUB): New macro. (NARROW_SUB_ROUND_TO_ODD): Likewise. (NARROW_SUB_TRIVIAL): Likewise. * sysdeps/ieee754/float128/float128_private.h (__fsubl): New macro. (__dsubl): Likewise. * sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add fsub and dsub. (CFLAGS-nldbl-dsub.c): New variable. (CFLAGS-nldbl-fsub.c): Likewise. * sysdeps/ieee754/ldbl-opt/Versions (GLIBC_2.28): Add __nldbl_dsubl. * sysdeps/ieee754/ldbl-opt/nldbl-compat.h (__nldbl_dsubl): New prototype. * manual/arith.texi (Misc FP Arithmetic): Document fsub, fsubl, dsubl, fMsubfN, fMsubfNx, fMxsubfN and fMxsubfNx. * math/auto-libm-test-in: Add tests of sub. * math/auto-libm-test-out-narrow-sub: New generated file. * math/libm-test-narrow-sub.inc: New file. * sysdeps/i386/fpu/s_f32xsubf64.c: Likewise. * sysdeps/ieee754/dbl-64/s_f32xsubf64.c: Likewise. * sysdeps/ieee754/dbl-64/s_fsub.c: Likewise. * sysdeps/ieee754/float128/s_f32subf128.c: Likewise. * sysdeps/ieee754/float128/s_f64subf128.c: Likewise. * sysdeps/ieee754/float128/s_f64xsubf128.c: Likewise. * sysdeps/ieee754/ldbl-128/s_dsubl.c: Likewise. * sysdeps/ieee754/ldbl-128/s_f64xsubf128.c: Likewise. * sysdeps/ieee754/ldbl-128/s_fsubl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_dsubl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_fsubl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_dsubl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_fsubl.c: Likewise. * sysdeps/ieee754/ldbl-opt/nldbl-dsub.c: Likewise. * sysdeps/ieee754/ldbl-opt/nldbl-fsub.c: Likewise. * sysdeps/ieee754/soft-fp/s_dsubl.c: Likewise. * sysdeps/ieee754/soft-fp/s_fsub.c: Likewise. * sysdeps/ieee754/soft-fp/s_fsubl.c: Likewise. * sysdeps/powerpc/fpu/libm-test-ulps: Update. * sysdeps/mach/hurd/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/riscv/rv64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
2018-03-20 00:34:52 +00:00
FUNC_mpfr_ff_f ("sub", mpfr_sub, true),
FUNC_mpfr_f_f ("sqrt", mpfr_sqrt, true),
FUNC_mpfr_f_f ("tan", mpfr_tan, false),
FUNC_mpfr_f_f ("tanh", mpfr_tanh, false),
FUNC_mpfr_f_f ("tgamma", mpfr_gamma, false),
FUNC_mpfr_f_f ("y0", mpfr_y0, false),
FUNC_mpfr_f_f ("y1", mpfr_y1, false),
FUNC_mpfr_if_f ("yn", mpfr_yn, false),
};
/* Allocate memory, with error checking. */
static void *
xmalloc (size_t n)
{
void *p = malloc (n);
if (p == NULL)
error (EXIT_FAILURE, errno, "xmalloc failed");
return p;
}
static void *
xrealloc (void *p, size_t n)
{
p = realloc (p, n);
if (p == NULL)
error (EXIT_FAILURE, errno, "xrealloc failed");
return p;
}
static char *
xstrdup (const char *s)
{
char *p = strdup (s);
if (p == NULL)
error (EXIT_FAILURE, errno, "xstrdup failed");
return p;
}
/* Assert that the result of an MPFR operation was exact; that is,
that the returned ternary value was 0. */
static void
assert_exact (int i)
{
assert (i == 0);
}
/* Return the generic type of an argument or return value type T. */
static generic_value_type
generic_arg_ret_type (arg_ret_type t)
{
switch (t)
{
case type_fp:
return gtype_fp;
case type_int:
case type_long:
case type_long_long:
return gtype_int;
default:
abort ();
}
}
/* Free a generic_value *V. */
static void
generic_value_free (generic_value *v)
{
switch (v->type)
{
case gtype_fp:
mpfr_clear (v->value.f);
break;
case gtype_int:
mpz_clear (v->value.i);
break;
default:
abort ();
}
}
/* Copy a generic_value *SRC to *DEST. */
static void
generic_value_copy (generic_value *dest, const generic_value *src)
{
dest->type = src->type;
switch (src->type)
{
case gtype_fp:
mpfr_init (dest->value.f);
assert_exact (mpfr_set (dest->value.f, src->value.f, MPFR_RNDN));
break;
case gtype_int:
mpz_init (dest->value.i);
mpz_set (dest->value.i, src->value.i);
break;
default:
abort ();
}
}
/* Initialize data for floating-point formats. */
static void
Convert 113 more function definitions to prototype style (files with assertions). This mostly automatically-generated patch converts 113 function definitions in glibc from old-style K&R to prototype-style. Following my other recent such patches, this one deals with the case of function definitions in files that either contain assertions or where grep suggested they might contain assertions - and thus where it isn't possible to use a simple object code comparison as a sanity check on the correctness of the patch, because line numbers are changed. A few such automatically-generated changes needed to be supplemented by manual changes for the result to compile. openat64 had a prototype declaration with "..." but an old-style definition in sysdeps/unix/sysv/linux/dl-openat64.c, and "..." needed adding to the generated prototype in the definition (I've filed <https://gcc.gnu.org/bugzilla/show_bug.cgi?id=68024> for diagnosing such cases in GCC; the old state was undefined behavior not requiring a diagnostic, but one seems a good idea). In addition, as Florian has noted regparm attribute mismatches between declaration and definition are only diagnosed for prototype definitions, and five functions needed internal_function added to their definitions (in the case of __pthread_mutex_cond_lock, via the macro definition of __pthread_mutex_lock) to compile on i386. After this patch is in, remaining old-style definitions are probably most readily fixed manually before we can turn on -Wold-style-definition for all builds. Tested for x86_64 and x86 (testsuite). * crypt/md5-crypt.c (__md5_crypt_r): Convert to prototype-style function definition. * crypt/sha256-crypt.c (__sha256_crypt_r): Likewise. * crypt/sha512-crypt.c (__sha512_crypt_r): Likewise. * debug/backtracesyms.c (__backtrace_symbols): Likewise. * elf/dl-minimal.c (_itoa): Likewise. * hurd/hurdmalloc.c (malloc): Likewise. (free): Likewise. (realloc): Likewise. * inet/inet6_option.c (inet6_option_space): Likewise. (inet6_option_init): Likewise. (inet6_option_append): Likewise. (inet6_option_alloc): Likewise. (inet6_option_next): Likewise. (inet6_option_find): Likewise. * io/ftw.c (FTW_NAME): Likewise. (NFTW_NAME): Likewise. (NFTW_NEW_NAME): Likewise. (NFTW_OLD_NAME): Likewise. * libio/iofwide.c (_IO_fwide): Likewise. * libio/strops.c (_IO_str_init_static_internal): Likewise. (_IO_str_init_static): Likewise. (_IO_str_init_readonly): Likewise. (_IO_str_overflow): Likewise. (_IO_str_underflow): Likewise. (_IO_str_count): Likewise. (_IO_str_seekoff): Likewise. (_IO_str_pbackfail): Likewise. (_IO_str_finish): Likewise. * libio/wstrops.c (_IO_wstr_init_static): Likewise. (_IO_wstr_overflow): Likewise. (_IO_wstr_underflow): Likewise. (_IO_wstr_count): Likewise. (_IO_wstr_seekoff): Likewise. (_IO_wstr_pbackfail): Likewise. (_IO_wstr_finish): Likewise. * locale/programs/localedef.c (normalize_codeset): Likewise. * locale/programs/locarchive.c (add_locale_to_archive): Likewise. (add_locales_to_archive): Likewise. (delete_locales_from_archive): Likewise. * malloc/malloc.c (__libc_mallinfo): Likewise. * math/gen-auto-libm-tests.c (init_fp_formats): Likewise. * misc/tsearch.c (__tfind): Likewise. * nptl/pthread_attr_destroy.c (__pthread_attr_destroy): Likewise. * nptl/pthread_attr_getdetachstate.c (__pthread_attr_getdetachstate): Likewise. * nptl/pthread_attr_getguardsize.c (pthread_attr_getguardsize): Likewise. * nptl/pthread_attr_getinheritsched.c (__pthread_attr_getinheritsched): Likewise. * nptl/pthread_attr_getschedparam.c (__pthread_attr_getschedparam): Likewise. * nptl/pthread_attr_getschedpolicy.c (__pthread_attr_getschedpolicy): Likewise. * nptl/pthread_attr_getscope.c (__pthread_attr_getscope): Likewise. * nptl/pthread_attr_getstack.c (__pthread_attr_getstack): Likewise. * nptl/pthread_attr_getstackaddr.c (__pthread_attr_getstackaddr): Likewise. * nptl/pthread_attr_getstacksize.c (__pthread_attr_getstacksize): Likewise. * nptl/pthread_attr_init.c (__pthread_attr_init_2_1): Likewise. (__pthread_attr_init_2_0): Likewise. * nptl/pthread_attr_setdetachstate.c (__pthread_attr_setdetachstate): Likewise. * nptl/pthread_attr_setguardsize.c (pthread_attr_setguardsize): Likewise. * nptl/pthread_attr_setinheritsched.c (__pthread_attr_setinheritsched): Likewise. * nptl/pthread_attr_setschedparam.c (__pthread_attr_setschedparam): Likewise. * nptl/pthread_attr_setschedpolicy.c (__pthread_attr_setschedpolicy): Likewise. * nptl/pthread_attr_setscope.c (__pthread_attr_setscope): Likewise. * nptl/pthread_attr_setstack.c (__pthread_attr_setstack): Likewise. * nptl/pthread_attr_setstackaddr.c (__pthread_attr_setstackaddr): Likewise. * nptl/pthread_attr_setstacksize.c (__pthread_attr_setstacksize): Likewise. * nptl/pthread_condattr_setclock.c (pthread_condattr_setclock): Likewise. * nptl/pthread_create.c (__find_in_stack_list): Likewise. * nptl/pthread_getattr_np.c (pthread_getattr_np): Likewise. * nptl/pthread_mutex_cond_lock.c (__pthread_mutex_lock): Define to use internal_function. * nptl/pthread_mutex_init.c (__pthread_mutex_init): Convert to prototype-style function definition. * nptl/pthread_mutex_lock.c (__pthread_mutex_lock): Likewise. (__pthread_mutex_cond_lock_adjust): Likewise. Use internal_function. * nptl/pthread_mutex_timedlock.c (pthread_mutex_timedlock): Convert to prototype-style function definition. * nptl/pthread_mutex_trylock.c (__pthread_mutex_trylock): Likewise. * nptl/pthread_mutex_unlock.c (__pthread_mutex_unlock_usercnt): Likewise. (__pthread_mutex_unlock): Likewise. * nptl_db/td_ta_clear_event.c (td_ta_clear_event): Likewise. * nptl_db/td_ta_set_event.c (td_ta_set_event): Likewise. * nptl_db/td_thr_clear_event.c (td_thr_clear_event): Likewise. * nptl_db/td_thr_event_enable.c (td_thr_event_enable): Likewise. * nptl_db/td_thr_set_event.c (td_thr_set_event): Likewise. * nss/makedb.c (process_input): Likewise. * posix/fnmatch.c (__strchrnul): Likewise. (__wcschrnul): Likewise. (fnmatch): Likewise. * posix/fnmatch_loop.c (FCT): Likewise. * posix/glob.c (globfree): Likewise. (__glob_pattern_type): Likewise. (__glob_pattern_p): Likewise. * posix/regcomp.c (re_compile_pattern): Likewise. (re_set_syntax): Likewise. (re_compile_fastmap): Likewise. (regcomp): Likewise. (regerror): Likewise. (regfree): Likewise. * posix/regexec.c (regexec): Likewise. (re_match): Likewise. (re_search): Likewise. (re_match_2): Likewise. (re_search_2): Likewise. (re_search_stub): Likewise. Use internal_function (re_copy_regs): Likewise. (re_set_registers): Convert to prototype-style function definition. (prune_impossible_nodes): Likewise. Use internal_function. * resolv/inet_net_pton.c (inet_net_pton): Convert to prototype-style function definition. (inet_net_pton_ipv4): Likewise. * stdlib/strtod_l.c (____STRTOF_INTERNAL): Likewise. * sysdeps/pthread/aio_cancel.c (aio_cancel): Likewise. * sysdeps/pthread/aio_suspend.c (aio_suspend): Likewise. * sysdeps/pthread/timer_delete.c (timer_delete): Likewise. * sysdeps/unix/sysv/linux/dl-openat64.c (openat64): Likewise. Make variadic. * time/strptime_l.c (localtime_r): Convert to prototype-style function definition. * wcsmbs/mbsnrtowcs.c (__mbsnrtowcs): Likewise. * wcsmbs/mbsrtowcs_l.c (__mbsrtowcs_l): Likewise. * wcsmbs/wcsnrtombs.c (__wcsnrtombs): Likewise. * wcsmbs/wcsrtombs.c (__wcsrtombs): Likewise.
2015-10-20 11:54:09 +00:00
init_fp_formats (void)
{
int global_max_exp = 0, global_min_subnorm_exp = 0;
for (fp_format f = fp_first_format; f < fp_num_formats; f++)
{
if (fp_formats[f].mant_dig + 2 > internal_precision)
internal_precision = fp_formats[f].mant_dig + 2;
if (fp_formats[f].max_exp > global_max_exp)
global_max_exp = fp_formats[f].max_exp;
int min_subnorm_exp = fp_formats[f].min_exp - fp_formats[f].mant_dig;
if (min_subnorm_exp < global_min_subnorm_exp)
global_min_subnorm_exp = min_subnorm_exp;
mpfr_init2 (fp_formats[f].max, fp_formats[f].mant_dig);
if (fp_formats[f].max_string != NULL)
{
char *ep = NULL;
assert_exact (mpfr_strtofr (fp_formats[f].max,
fp_formats[f].max_string,
&ep, 0, MPFR_RNDN));
assert (*ep == 0);
}
else
{
assert_exact (mpfr_set_ui_2exp (fp_formats[f].max, 1,
fp_formats[f].max_exp,
MPFR_RNDN));
mpfr_nextbelow (fp_formats[f].max);
}
mpfr_init2 (fp_formats[f].min, fp_formats[f].mant_dig);
assert_exact (mpfr_set_ui_2exp (fp_formats[f].min, 1,
fp_formats[f].min_exp - 1,
MPFR_RNDN));
Relax gen-auto-libm-tests may-underflow rules, test log1p in all rounding modes. gen-auto-libm-tests presently allows but does not require underflow exceptions for results with magnitude in the range (greatest subnormal, least normal]. In some cases, the magnitude of the exact result is very slightly above the least normal, but rounding in the implementation results in it effectively computing an infinite-precision result that is slightly below the least normal, so raising an underflow exception. This is in accordance with the documented accuracy goals, but results in testsuite failures. This patch changes the logic to allow underflows when the mathematical result is up to 0.5ulp above the least normal (so in any case where the round-to-nearest result is the least normal). Ideally underflows in all these cases would be accepted only when an underflow with the actual result is consistent with the rounding mode (in FE_TOWARDZERO mode, a return value of the least normal implies that the infinite-precision result did not underflow so there should be no underflow exception, for example), so as to match the documented goals more precisely - whereas at present the tests for exceptions are completely independent of the tests of the returned values. (The same applies to overflow exceptions as well - they too should be checked for consistency with the result, as in FE_TOWARDZERO mode a result 1ulp below the largest finite value should be inconsistent with an overflow exception and cause a failure with overflow rather than simply being considered a 1ulp error when overflow is expected.) But the present patch at least deals with the cases causing spurious failures so that (a) certain existing tests no longer need to be marked as having spurious exceptions (such markings in auto-libm-test-in end up applying to more cases than just those they are needed for) and (b) log1p can be tested in all rounding modes without introducing more such failures. This patch duly moves tests of log1p to ALL_RM_TEST. Tested x86_64 and x86 and ulps updated accordingly. [BZ #16357] [BZ #16599] * math/gen-auto-libm-tests.c (fp_format_desc): Add field min_plus_half. (fp_formats): Update initializers. (init_fp_formats): Initialize new field. (output_for_one_input_case): Allow underflow for results up to min_plus_half. * math/libm-test.inc (log1p_test): Use ALL_RM_TEST. * math/auto-libm-test-in: Don't mark some underflows from asin and atanh as spurious. * math/auto-libm-test-out: Regenerated. * sysdeps/i386/fpu/libm-test-ulps: Update. * sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
2014-03-25 12:26:06 +00:00
mpfr_init2 (fp_formats[f].min_plus_half, fp_formats[f].mant_dig + 1);
assert_exact (mpfr_set (fp_formats[f].min_plus_half,
fp_formats[f].min, MPFR_RNDN));
mpfr_nextabove (fp_formats[f].min_plus_half);
mpfr_init2 (fp_formats[f].subnorm_max, fp_formats[f].mant_dig);
assert_exact (mpfr_set (fp_formats[f].subnorm_max, fp_formats[f].min,
MPFR_RNDN));
mpfr_nextbelow (fp_formats[f].subnorm_max);
mpfr_nextbelow (fp_formats[f].subnorm_max);
mpfr_init2 (fp_formats[f].subnorm_min, fp_formats[f].mant_dig);
assert_exact (mpfr_set_ui_2exp (fp_formats[f].subnorm_min, 1,
min_subnorm_exp, MPFR_RNDN));
}
mpfr_set_default_prec (internal_precision);
mpfr_init (global_max);
assert_exact (mpfr_set_ui_2exp (global_max, 1, global_max_exp, MPFR_RNDN));
mpfr_init (global_min);
assert_exact (mpfr_set_ui_2exp (global_min, 1, global_min_subnorm_exp - 1,
MPFR_RNDN));
}
/* Fill in mpfr_t values for special strings in input arguments. */
static size_t
special_fill_max (mpfr_t res0, mpfr_t res1 __attribute__ ((unused)),
fp_format format)
{
mpfr_init2 (res0, fp_formats[format].mant_dig);
assert_exact (mpfr_set (res0, fp_formats[format].max, MPFR_RNDN));
return 1;
}
static size_t
special_fill_minus_max (mpfr_t res0, mpfr_t res1 __attribute__ ((unused)),
fp_format format)
{
mpfr_init2 (res0, fp_formats[format].mant_dig);
assert_exact (mpfr_neg (res0, fp_formats[format].max, MPFR_RNDN));
return 1;
}
static size_t
special_fill_min (mpfr_t res0, mpfr_t res1 __attribute__ ((unused)),
fp_format format)
{
mpfr_init2 (res0, fp_formats[format].mant_dig);
assert_exact (mpfr_set (res0, fp_formats[format].min, MPFR_RNDN));
return 1;
}
static size_t
special_fill_minus_min (mpfr_t res0, mpfr_t res1 __attribute__ ((unused)),
fp_format format)
{
mpfr_init2 (res0, fp_formats[format].mant_dig);
assert_exact (mpfr_neg (res0, fp_formats[format].min, MPFR_RNDN));
return 1;
}
static size_t
special_fill_min_subnorm (mpfr_t res0, mpfr_t res1 __attribute__ ((unused)),
fp_format format)
{
mpfr_init2 (res0, fp_formats[format].mant_dig);
assert_exact (mpfr_set (res0, fp_formats[format].subnorm_min, MPFR_RNDN));
return 1;
}
static size_t
special_fill_minus_min_subnorm (mpfr_t res0,
mpfr_t res1 __attribute__ ((unused)),
fp_format format)
{
mpfr_init2 (res0, fp_formats[format].mant_dig);
assert_exact (mpfr_neg (res0, fp_formats[format].subnorm_min, MPFR_RNDN));
return 1;
}
Move various TEST_c_c tests from libm-test.inc to auto-libm-test-inc. This patch moves tests of ccos, ccosh, cexp, clog, csqrt, ctan and ctanh to auto-libm-test-in, adding the required support to gen-auto-libm-tests. Other TEST_c_c functions aren't moved for now (although the relevant table entries are put in gen-auto-libm-tests for it to know how to handle them): clog10 because of a known MPC bug causing it to hang for at least some pure imaginary inputs (fixed in SVN, but I'd rather not rely on unreleased versions of MPFR or MPC even if relying on very recent releases); the inverse trig and hyperbolic functions because of known slowness in special cases; and csin / csinh because of observed slowness that I need to investigate and report to the MPC maintainers. Slowness can be bypassed by moving to incremental generation (only for new / changed tests) rather than regenerating the whole of auto-libm-test-out every time, but that needs implementing. (This patch takes the time for running gen-auto-libm-tests from about one second to seven, on my system, which I think is reasonable. The slow functions would make it take several minutes at least, which seems unreasonable.) Tested x86_64 and x86 and ulps updated accordingly. * math/auto-libm-test-in: Add tests of ccos, ccosh, cexp, clog, csqrt, ctan and ctanh. * math/auto-libm-test-out: Regenerated. * math/libm-test.inc (TEST_COND_x86_64): New macro. (TEST_COND_x86): Likewise. (ccos_test_data): Use AUTO_TESTS_c_c. (ccosh_test_data): Likewise. (cexp_test_data): Likewise. (clog_test_data): Likewise. (csqrt_test_data): Likewise. (ctan_test_data): Likewise. (ctan_tonearest_test_data): Likewise. (ctan_towardzero_test_data): Likewise. (ctan_downward_test_data): Likewise. (ctan_upward_test_data): Likewise. (ctanh_test_data): Likewise. (ctanh_tonearest_test_data): Likewise. (ctanh_towardzero_test_data): Likewise. (ctanh_downward_test_data): Likewise. (ctanh_upward_test_data): Likewise. * math/gen-auto-libm-tests.c (func_calc_method): Add value mpc_c_c. (func_calc_desc): Add mpc_c_c union field. (FUNC_mpc_c_c): New macro. (test_functions): Add cacos, cacosh, casin, casinh, catan, catanh, ccos, ccosh, cexp, clog, clog10, csin, csinh, csqrt, ctan and ctanh. (special_fill_min_subnorm_p120): New function. (special_real_inputs): Add min_subnorm_p120. (calc_generic_results): Handle mpc_c_c. * sysdeps/i386/fpu/libm-test-ulps: Update. * sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
2013-12-20 12:32:44 +00:00
static size_t
special_fill_min_subnorm_p120 (mpfr_t res0,
mpfr_t res1 __attribute__ ((unused)),
fp_format format)
{
mpfr_init2 (res0, fp_formats[format].mant_dig);
assert_exact (mpfr_mul_2ui (res0, fp_formats[format].subnorm_min,
120, MPFR_RNDN));
return 1;
}
static size_t
special_fill_pi (mpfr_t res0, mpfr_t res1, fp_format format)
{
mpfr_init2 (res0, fp_formats[format].mant_dig);
mpfr_const_pi (res0, MPFR_RNDU);
mpfr_init2 (res1, fp_formats[format].mant_dig);
mpfr_const_pi (res1, MPFR_RNDD);
return 2;
}
static size_t
special_fill_minus_pi (mpfr_t res0, mpfr_t res1, fp_format format)
{
mpfr_init2 (res0, fp_formats[format].mant_dig);
mpfr_const_pi (res0, MPFR_RNDU);
assert_exact (mpfr_neg (res0, res0, MPFR_RNDN));
mpfr_init2 (res1, fp_formats[format].mant_dig);
mpfr_const_pi (res1, MPFR_RNDD);
assert_exact (mpfr_neg (res1, res1, MPFR_RNDN));
return 2;
}
static size_t
special_fill_pi_2 (mpfr_t res0, mpfr_t res1, fp_format format)
{
mpfr_init2 (res0, fp_formats[format].mant_dig);
mpfr_const_pi (res0, MPFR_RNDU);
assert_exact (mpfr_div_ui (res0, res0, 2, MPFR_RNDN));
mpfr_init2 (res1, fp_formats[format].mant_dig);
mpfr_const_pi (res1, MPFR_RNDD);
assert_exact (mpfr_div_ui (res1, res1, 2, MPFR_RNDN));
return 2;
}
static size_t
special_fill_minus_pi_2 (mpfr_t res0, mpfr_t res1, fp_format format)
{
mpfr_init2 (res0, fp_formats[format].mant_dig);
mpfr_const_pi (res0, MPFR_RNDU);
assert_exact (mpfr_div_ui (res0, res0, 2, MPFR_RNDN));
assert_exact (mpfr_neg (res0, res0, MPFR_RNDN));
mpfr_init2 (res1, fp_formats[format].mant_dig);
mpfr_const_pi (res1, MPFR_RNDD);
assert_exact (mpfr_div_ui (res1, res1, 2, MPFR_RNDN));
assert_exact (mpfr_neg (res1, res1, MPFR_RNDN));
return 2;
}
static size_t
special_fill_pi_4 (mpfr_t res0, mpfr_t res1, fp_format format)
{
mpfr_init2 (res0, fp_formats[format].mant_dig);
assert_exact (mpfr_set_si (res0, 1, MPFR_RNDN));
mpfr_atan (res0, res0, MPFR_RNDU);
mpfr_init2 (res1, fp_formats[format].mant_dig);
assert_exact (mpfr_set_si (res1, 1, MPFR_RNDN));
mpfr_atan (res1, res1, MPFR_RNDD);
return 2;
}
static size_t
special_fill_pi_6 (mpfr_t res0, mpfr_t res1, fp_format format)
{
mpfr_init2 (res0, fp_formats[format].mant_dig);
assert_exact (mpfr_set_si_2exp (res0, 1, -1, MPFR_RNDN));
mpfr_asin (res0, res0, MPFR_RNDU);
mpfr_init2 (res1, fp_formats[format].mant_dig);
assert_exact (mpfr_set_si_2exp (res1, 1, -1, MPFR_RNDN));
mpfr_asin (res1, res1, MPFR_RNDD);
return 2;
}
static size_t
special_fill_minus_pi_6 (mpfr_t res0, mpfr_t res1, fp_format format)
{
mpfr_init2 (res0, fp_formats[format].mant_dig);
assert_exact (mpfr_set_si_2exp (res0, -1, -1, MPFR_RNDN));
mpfr_asin (res0, res0, MPFR_RNDU);
mpfr_init2 (res1, fp_formats[format].mant_dig);
assert_exact (mpfr_set_si_2exp (res1, -1, -1, MPFR_RNDN));
mpfr_asin (res1, res1, MPFR_RNDD);
return 2;
}
static size_t
special_fill_pi_3 (mpfr_t res0, mpfr_t res1, fp_format format)
{
mpfr_init2 (res0, fp_formats[format].mant_dig);
assert_exact (mpfr_set_si_2exp (res0, 1, -1, MPFR_RNDN));
mpfr_acos (res0, res0, MPFR_RNDU);
mpfr_init2 (res1, fp_formats[format].mant_dig);
assert_exact (mpfr_set_si_2exp (res1, 1, -1, MPFR_RNDN));
mpfr_acos (res1, res1, MPFR_RNDD);
return 2;
}
static size_t
special_fill_2pi_3 (mpfr_t res0, mpfr_t res1, fp_format format)
{
mpfr_init2 (res0, fp_formats[format].mant_dig);
assert_exact (mpfr_set_si_2exp (res0, -1, -1, MPFR_RNDN));
mpfr_acos (res0, res0, MPFR_RNDU);
mpfr_init2 (res1, fp_formats[format].mant_dig);
assert_exact (mpfr_set_si_2exp (res1, -1, -1, MPFR_RNDN));
mpfr_acos (res1, res1, MPFR_RNDD);
return 2;
}
static size_t
special_fill_2pi (mpfr_t res0, mpfr_t res1, fp_format format)
{
mpfr_init2 (res0, fp_formats[format].mant_dig);
mpfr_const_pi (res0, MPFR_RNDU);
assert_exact (mpfr_mul_ui (res0, res0, 2, MPFR_RNDN));
mpfr_init2 (res1, fp_formats[format].mant_dig);
mpfr_const_pi (res1, MPFR_RNDD);
assert_exact (mpfr_mul_ui (res1, res1, 2, MPFR_RNDN));
return 2;
}
static size_t
special_fill_e (mpfr_t res0, mpfr_t res1, fp_format format)
{
mpfr_init2 (res0, fp_formats[format].mant_dig);
assert_exact (mpfr_set_si (res0, 1, MPFR_RNDN));
mpfr_exp (res0, res0, MPFR_RNDU);
mpfr_init2 (res1, fp_formats[format].mant_dig);
assert_exact (mpfr_set_si (res1, 1, MPFR_RNDN));
mpfr_exp (res1, res1, MPFR_RNDD);
return 2;
}
static size_t
special_fill_1_e (mpfr_t res0, mpfr_t res1, fp_format format)
{
mpfr_init2 (res0, fp_formats[format].mant_dig);
assert_exact (mpfr_set_si (res0, -1, MPFR_RNDN));
mpfr_exp (res0, res0, MPFR_RNDU);
mpfr_init2 (res1, fp_formats[format].mant_dig);
assert_exact (mpfr_set_si (res1, -1, MPFR_RNDN));
mpfr_exp (res1, res1, MPFR_RNDD);
return 2;
}
static size_t
special_fill_e_minus_1 (mpfr_t res0, mpfr_t res1, fp_format format)
{
mpfr_init2 (res0, fp_formats[format].mant_dig);
assert_exact (mpfr_set_si (res0, 1, MPFR_RNDN));
mpfr_expm1 (res0, res0, MPFR_RNDU);
mpfr_init2 (res1, fp_formats[format].mant_dig);
assert_exact (mpfr_set_si (res1, 1, MPFR_RNDN));
mpfr_expm1 (res1, res1, MPFR_RNDD);
return 2;
}
/* A special string accepted in input arguments. */
typedef struct
{
/* The string. */
const char *str;
/* The function that interprets it for a given floating-point
format, filling in up to two mpfr_t values and returning the
number of values filled. */
size_t (*func) (mpfr_t, mpfr_t, fp_format);
} special_real_input;
/* List of special strings accepted in input arguments. */
static const special_real_input special_real_inputs[] =
{
{ "max", special_fill_max },
{ "-max", special_fill_minus_max },
{ "min", special_fill_min },
{ "-min", special_fill_minus_min },
{ "min_subnorm", special_fill_min_subnorm },
{ "-min_subnorm", special_fill_minus_min_subnorm },
Move various TEST_c_c tests from libm-test.inc to auto-libm-test-inc. This patch moves tests of ccos, ccosh, cexp, clog, csqrt, ctan and ctanh to auto-libm-test-in, adding the required support to gen-auto-libm-tests. Other TEST_c_c functions aren't moved for now (although the relevant table entries are put in gen-auto-libm-tests for it to know how to handle them): clog10 because of a known MPC bug causing it to hang for at least some pure imaginary inputs (fixed in SVN, but I'd rather not rely on unreleased versions of MPFR or MPC even if relying on very recent releases); the inverse trig and hyperbolic functions because of known slowness in special cases; and csin / csinh because of observed slowness that I need to investigate and report to the MPC maintainers. Slowness can be bypassed by moving to incremental generation (only for new / changed tests) rather than regenerating the whole of auto-libm-test-out every time, but that needs implementing. (This patch takes the time for running gen-auto-libm-tests from about one second to seven, on my system, which I think is reasonable. The slow functions would make it take several minutes at least, which seems unreasonable.) Tested x86_64 and x86 and ulps updated accordingly. * math/auto-libm-test-in: Add tests of ccos, ccosh, cexp, clog, csqrt, ctan and ctanh. * math/auto-libm-test-out: Regenerated. * math/libm-test.inc (TEST_COND_x86_64): New macro. (TEST_COND_x86): Likewise. (ccos_test_data): Use AUTO_TESTS_c_c. (ccosh_test_data): Likewise. (cexp_test_data): Likewise. (clog_test_data): Likewise. (csqrt_test_data): Likewise. (ctan_test_data): Likewise. (ctan_tonearest_test_data): Likewise. (ctan_towardzero_test_data): Likewise. (ctan_downward_test_data): Likewise. (ctan_upward_test_data): Likewise. (ctanh_test_data): Likewise. (ctanh_tonearest_test_data): Likewise. (ctanh_towardzero_test_data): Likewise. (ctanh_downward_test_data): Likewise. (ctanh_upward_test_data): Likewise. * math/gen-auto-libm-tests.c (func_calc_method): Add value mpc_c_c. (func_calc_desc): Add mpc_c_c union field. (FUNC_mpc_c_c): New macro. (test_functions): Add cacos, cacosh, casin, casinh, catan, catanh, ccos, ccosh, cexp, clog, clog10, csin, csinh, csqrt, ctan and ctanh. (special_fill_min_subnorm_p120): New function. (special_real_inputs): Add min_subnorm_p120. (calc_generic_results): Handle mpc_c_c. * sysdeps/i386/fpu/libm-test-ulps: Update. * sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
2013-12-20 12:32:44 +00:00
{ "min_subnorm_p120", special_fill_min_subnorm_p120 },
{ "pi", special_fill_pi },
{ "-pi", special_fill_minus_pi },
{ "pi/2", special_fill_pi_2 },
{ "-pi/2", special_fill_minus_pi_2 },
{ "pi/4", special_fill_pi_4 },
{ "pi/6", special_fill_pi_6 },
{ "-pi/6", special_fill_minus_pi_6 },
{ "pi/3", special_fill_pi_3 },
{ "2pi/3", special_fill_2pi_3 },
{ "2pi", special_fill_2pi },
{ "e", special_fill_e },
{ "1/e", special_fill_1_e },
{ "e-1", special_fill_e_minus_1 },
};
/* Given a real number R computed in round-to-zero mode, set the
lowest bit as a sticky bit if INEXACT, and saturate the exponent
range for very large or small values. */
static void
adjust_real (mpfr_t r, bool inexact)
{
if (!inexact)
return;
/* NaNs are exact, as are infinities in round-to-zero mode. */
assert (mpfr_number_p (r));
if (mpfr_cmpabs (r, global_min) < 0)
assert_exact (mpfr_copysign (r, global_min, r, MPFR_RNDN));
else if (mpfr_cmpabs (r, global_max) > 0)
assert_exact (mpfr_copysign (r, global_max, r, MPFR_RNDN));
else
{
mpz_t tmp;
mpz_init (tmp);
mpfr_exp_t e = mpfr_get_z_2exp (tmp, r);
if (mpz_sgn (tmp) < 0)
{
mpz_neg (tmp, tmp);
mpz_setbit (tmp, 0);
mpz_neg (tmp, tmp);
}
else
mpz_setbit (tmp, 0);
assert_exact (mpfr_set_z_2exp (r, tmp, e, MPFR_RNDN));
mpz_clear (tmp);
}
}
/* Given a finite real number R with sticky bit, compute the roundings
to FORMAT in each rounding mode, storing the results in RES, the
before-rounding exceptions in EXC_BEFORE and the after-rounding
exceptions in EXC_AFTER. */
static void
round_real (mpfr_t res[rm_num_modes],
unsigned int exc_before[rm_num_modes],
unsigned int exc_after[rm_num_modes],
mpfr_t r, fp_format format)
{
assert (mpfr_number_p (r));
for (rounding_mode m = rm_first_mode; m < rm_num_modes; m++)
{
mpfr_init2 (res[m], fp_formats[format].mant_dig);
exc_before[m] = exc_after[m] = 0;
bool inexact = mpfr_set (res[m], r, rounding_modes[m].mpfr_mode);
if (mpfr_cmpabs (res[m], fp_formats[format].max) > 0)
{
inexact = true;
exc_before[m] |= 1U << exc_overflow;
exc_after[m] |= 1U << exc_overflow;
bool overflow_inf;
switch (m)
{
case rm_tonearest:
overflow_inf = true;
break;
case rm_towardzero:
overflow_inf = false;
break;
case rm_downward:
overflow_inf = mpfr_signbit (res[m]);
break;
case rm_upward:
overflow_inf = !mpfr_signbit (res[m]);
break;
default:
abort ();
}
if (overflow_inf)
mpfr_set_inf (res[m], mpfr_signbit (res[m]) ? -1 : 1);
else
assert_exact (mpfr_copysign (res[m], fp_formats[format].max,
res[m], MPFR_RNDN));
}
if (mpfr_cmpabs (r, fp_formats[format].min) < 0)
{
/* Tiny before rounding; may or may not be tiny after
rounding, and underflow applies only if also inexact
around rounding to a possibly subnormal value. */
bool tiny_after_rounding
= mpfr_cmpabs (res[m], fp_formats[format].min) < 0;
/* To round to a possibly subnormal value, and determine
inexactness as a subnormal in the process, scale up and
round to integer, then scale back down. */
mpfr_t tmp;
mpfr_init (tmp);
assert_exact (mpfr_mul_2si (tmp, r, (fp_formats[format].mant_dig
- fp_formats[format].min_exp),
MPFR_RNDN));
int rint_res = mpfr_rint (tmp, tmp, rounding_modes[m].mpfr_mode);
/* The integer must be representable. */
assert (rint_res == 0 || rint_res == 2 || rint_res == -2);
/* If rounding to full precision was inexact, so must
rounding to subnormal precision be inexact. */
if (inexact)
assert (rint_res != 0);
else
inexact = rint_res != 0;
assert_exact (mpfr_mul_2si (res[m], tmp,
(fp_formats[format].min_exp
- fp_formats[format].mant_dig),
MPFR_RNDN));
mpfr_clear (tmp);
if (inexact)
{
exc_before[m] |= 1U << exc_underflow;
if (tiny_after_rounding)
exc_after[m] |= 1U << exc_underflow;
}
}
if (inexact)
{
exc_before[m] |= 1U << exc_inexact;
exc_after[m] |= 1U << exc_inexact;
}
}
}
/* Handle the input argument at ARG (NUL-terminated), updating the
lists of test inputs in IT accordingly. NUM_PREV_ARGS arguments
Move tests of fma from libm-test.inc to auto-libm-test-in. This patch moves tests of fma to auto-libm-test-in, adding the required support to gen-auto-libm-tests. Because fma can have exact zero results depending on the rounding mode, results of fma cannot always be determined from a single value computed in higher precision with a sticky bit. Thus, this patch adds support for recomputing results with the original MPFR/MPC function in the case where an exact zero is involved. (This also affects some results for cpow; when we start testing cpow in all rounding modes, I think it will be most appropriate to make those tests use IGNORE_ZERO_INF_SIGN, since ISO C does not attempt to determine signs of zero results, or special caes in general, for cpow, and I think signs of zero for cpow are beyond the scope of glibc's accuracy goals.) Simply treating the existing test inputs for fma like those for other functions (i.e., as representing the given value rounded up or down to any of the supported floating-point formats) increases the size of auto-libm-test-out by about 16MB (i.e., about half the file is fma test data). While rounded versions of tests are perfectly reasonable test inputs for fma, in this case having them seems excessive, so this patch allows functions to specify in gen-auto-libm-tests that the given test inputs are only to be interpreted exactly, not as corresponding to values rounded up and down. This reduces the size of the generated test data for fma to a more reasonable 2MB. A consequence of this patch is that fma is now tested for correct presence or absence of "inexact" exceptions, where previously this wasn't tested because I didn't want to try to add that test coverage manually to all the existing tests. As far as I know, the existing fma implementations are already correct in this regard. This patch provides the first cases where the gen-auto-libm-tests support for distinguishing before-rounding/after-rounding underflow actually produces separate entries in auto-libm-test-out (for functions without exactly determined results, the affected cases are all considered underflow-optional, so this only affects functions like fma with exactly determined results). I didn't see any signs of problems with this logic in the output. Tested x86_64 and x86. * math/auto-libm-test-in: Add tests of fma. * math/auto-libm-test-out: Regenerated. * math/libm-test.inc (fma_test_data): Use AUTO_TESTS_fff_f. (fma_towardzero_test_data): Likewise. (fma_downward_test_data): Likewise. (fma_upward_test_data): Likewise. * math/gen-auto-libm-tests.c (rounding_mode_desc): Add field mpc_mode. (rounding_modes): Add values for new field. (func_calc_method): Add value mpfr_fff_f. (func_calc_desc): Add mpfr_fff_f union field. (test_function): Add field exact_args. (FUNC): Add macro argument EXACT_ARGS. (FUNC_mpfr_f_f): Update call to FUNC. (FUNC_mpfr_f_f): Likewise. (FUNC_mpfr_ff_f): Likewise. (FUNC_mpfr_if_f): Likewise. (FUNC_mpc_c_f): Likewise. (FUNC_mpc_c_c): Likewise. (test_functions): Add fma. Update calls to FUNC. (handle_input_arg): Add argument exact_args. (add_test): Update call to handle_input_arg. (calc_generic_results): Add argument mode. Handle mpfr_fff_f. (output_for_one_input_case): Update call to calc_generic_results. Recalculate exact zero results in each rounding mode.
2014-02-18 21:48:51 +00:00
are already in those lists. If EXACT_ARGS, interpret a value given
as a floating-point constant exactly (it must be exact for some
supported format) rather than rounding up and down. The argument,
of type GTYPE, comes from file FILENAME, line LINENO. */
static void
handle_input_arg (const char *arg, input_test *it, size_t num_prev_args,
Move tests of fma from libm-test.inc to auto-libm-test-in. This patch moves tests of fma to auto-libm-test-in, adding the required support to gen-auto-libm-tests. Because fma can have exact zero results depending on the rounding mode, results of fma cannot always be determined from a single value computed in higher precision with a sticky bit. Thus, this patch adds support for recomputing results with the original MPFR/MPC function in the case where an exact zero is involved. (This also affects some results for cpow; when we start testing cpow in all rounding modes, I think it will be most appropriate to make those tests use IGNORE_ZERO_INF_SIGN, since ISO C does not attempt to determine signs of zero results, or special caes in general, for cpow, and I think signs of zero for cpow are beyond the scope of glibc's accuracy goals.) Simply treating the existing test inputs for fma like those for other functions (i.e., as representing the given value rounded up or down to any of the supported floating-point formats) increases the size of auto-libm-test-out by about 16MB (i.e., about half the file is fma test data). While rounded versions of tests are perfectly reasonable test inputs for fma, in this case having them seems excessive, so this patch allows functions to specify in gen-auto-libm-tests that the given test inputs are only to be interpreted exactly, not as corresponding to values rounded up and down. This reduces the size of the generated test data for fma to a more reasonable 2MB. A consequence of this patch is that fma is now tested for correct presence or absence of "inexact" exceptions, where previously this wasn't tested because I didn't want to try to add that test coverage manually to all the existing tests. As far as I know, the existing fma implementations are already correct in this regard. This patch provides the first cases where the gen-auto-libm-tests support for distinguishing before-rounding/after-rounding underflow actually produces separate entries in auto-libm-test-out (for functions without exactly determined results, the affected cases are all considered underflow-optional, so this only affects functions like fma with exactly determined results). I didn't see any signs of problems with this logic in the output. Tested x86_64 and x86. * math/auto-libm-test-in: Add tests of fma. * math/auto-libm-test-out: Regenerated. * math/libm-test.inc (fma_test_data): Use AUTO_TESTS_fff_f. (fma_towardzero_test_data): Likewise. (fma_downward_test_data): Likewise. (fma_upward_test_data): Likewise. * math/gen-auto-libm-tests.c (rounding_mode_desc): Add field mpc_mode. (rounding_modes): Add values for new field. (func_calc_method): Add value mpfr_fff_f. (func_calc_desc): Add mpfr_fff_f union field. (test_function): Add field exact_args. (FUNC): Add macro argument EXACT_ARGS. (FUNC_mpfr_f_f): Update call to FUNC. (FUNC_mpfr_f_f): Likewise. (FUNC_mpfr_ff_f): Likewise. (FUNC_mpfr_if_f): Likewise. (FUNC_mpc_c_f): Likewise. (FUNC_mpc_c_c): Likewise. (test_functions): Add fma. Update calls to FUNC. (handle_input_arg): Add argument exact_args. (add_test): Update call to handle_input_arg. (calc_generic_results): Add argument mode. Handle mpfr_fff_f. (output_for_one_input_case): Update call to calc_generic_results. Recalculate exact zero results in each rounding mode.
2014-02-18 21:48:51 +00:00
generic_value_type gtype, bool exact_args,
const char *filename, unsigned int lineno)
{
size_t num_values = 0;
generic_value values[2 * fp_num_formats];
Move tests of fma from libm-test.inc to auto-libm-test-in. This patch moves tests of fma to auto-libm-test-in, adding the required support to gen-auto-libm-tests. Because fma can have exact zero results depending on the rounding mode, results of fma cannot always be determined from a single value computed in higher precision with a sticky bit. Thus, this patch adds support for recomputing results with the original MPFR/MPC function in the case where an exact zero is involved. (This also affects some results for cpow; when we start testing cpow in all rounding modes, I think it will be most appropriate to make those tests use IGNORE_ZERO_INF_SIGN, since ISO C does not attempt to determine signs of zero results, or special caes in general, for cpow, and I think signs of zero for cpow are beyond the scope of glibc's accuracy goals.) Simply treating the existing test inputs for fma like those for other functions (i.e., as representing the given value rounded up or down to any of the supported floating-point formats) increases the size of auto-libm-test-out by about 16MB (i.e., about half the file is fma test data). While rounded versions of tests are perfectly reasonable test inputs for fma, in this case having them seems excessive, so this patch allows functions to specify in gen-auto-libm-tests that the given test inputs are only to be interpreted exactly, not as corresponding to values rounded up and down. This reduces the size of the generated test data for fma to a more reasonable 2MB. A consequence of this patch is that fma is now tested for correct presence or absence of "inexact" exceptions, where previously this wasn't tested because I didn't want to try to add that test coverage manually to all the existing tests. As far as I know, the existing fma implementations are already correct in this regard. This patch provides the first cases where the gen-auto-libm-tests support for distinguishing before-rounding/after-rounding underflow actually produces separate entries in auto-libm-test-out (for functions without exactly determined results, the affected cases are all considered underflow-optional, so this only affects functions like fma with exactly determined results). I didn't see any signs of problems with this logic in the output. Tested x86_64 and x86. * math/auto-libm-test-in: Add tests of fma. * math/auto-libm-test-out: Regenerated. * math/libm-test.inc (fma_test_data): Use AUTO_TESTS_fff_f. (fma_towardzero_test_data): Likewise. (fma_downward_test_data): Likewise. (fma_upward_test_data): Likewise. * math/gen-auto-libm-tests.c (rounding_mode_desc): Add field mpc_mode. (rounding_modes): Add values for new field. (func_calc_method): Add value mpfr_fff_f. (func_calc_desc): Add mpfr_fff_f union field. (test_function): Add field exact_args. (FUNC): Add macro argument EXACT_ARGS. (FUNC_mpfr_f_f): Update call to FUNC. (FUNC_mpfr_f_f): Likewise. (FUNC_mpfr_ff_f): Likewise. (FUNC_mpfr_if_f): Likewise. (FUNC_mpc_c_f): Likewise. (FUNC_mpc_c_c): Likewise. (test_functions): Add fma. Update calls to FUNC. (handle_input_arg): Add argument exact_args. (add_test): Update call to handle_input_arg. (calc_generic_results): Add argument mode. Handle mpfr_fff_f. (output_for_one_input_case): Update call to calc_generic_results. Recalculate exact zero results in each rounding mode.
2014-02-18 21:48:51 +00:00
bool check_empty_list = false;
switch (gtype)
{
case gtype_fp:
for (fp_format f = fp_first_format; f < fp_num_formats; f++)
{
mpfr_t extra_values[2];
size_t num_extra_values = 0;
for (size_t i = 0; i < ARRAY_SIZE (special_real_inputs); i++)
{
if (strcmp (arg, special_real_inputs[i].str) == 0)
{
num_extra_values
= special_real_inputs[i].func (extra_values[0],
extra_values[1], f);
assert (num_extra_values > 0
&& num_extra_values <= ARRAY_SIZE (extra_values));
break;
}
}
if (num_extra_values == 0)
{
mpfr_t tmp;
char *ep;
Move tests of fma from libm-test.inc to auto-libm-test-in. This patch moves tests of fma to auto-libm-test-in, adding the required support to gen-auto-libm-tests. Because fma can have exact zero results depending on the rounding mode, results of fma cannot always be determined from a single value computed in higher precision with a sticky bit. Thus, this patch adds support for recomputing results with the original MPFR/MPC function in the case where an exact zero is involved. (This also affects some results for cpow; when we start testing cpow in all rounding modes, I think it will be most appropriate to make those tests use IGNORE_ZERO_INF_SIGN, since ISO C does not attempt to determine signs of zero results, or special caes in general, for cpow, and I think signs of zero for cpow are beyond the scope of glibc's accuracy goals.) Simply treating the existing test inputs for fma like those for other functions (i.e., as representing the given value rounded up or down to any of the supported floating-point formats) increases the size of auto-libm-test-out by about 16MB (i.e., about half the file is fma test data). While rounded versions of tests are perfectly reasonable test inputs for fma, in this case having them seems excessive, so this patch allows functions to specify in gen-auto-libm-tests that the given test inputs are only to be interpreted exactly, not as corresponding to values rounded up and down. This reduces the size of the generated test data for fma to a more reasonable 2MB. A consequence of this patch is that fma is now tested for correct presence or absence of "inexact" exceptions, where previously this wasn't tested because I didn't want to try to add that test coverage manually to all the existing tests. As far as I know, the existing fma implementations are already correct in this regard. This patch provides the first cases where the gen-auto-libm-tests support for distinguishing before-rounding/after-rounding underflow actually produces separate entries in auto-libm-test-out (for functions without exactly determined results, the affected cases are all considered underflow-optional, so this only affects functions like fma with exactly determined results). I didn't see any signs of problems with this logic in the output. Tested x86_64 and x86. * math/auto-libm-test-in: Add tests of fma. * math/auto-libm-test-out: Regenerated. * math/libm-test.inc (fma_test_data): Use AUTO_TESTS_fff_f. (fma_towardzero_test_data): Likewise. (fma_downward_test_data): Likewise. (fma_upward_test_data): Likewise. * math/gen-auto-libm-tests.c (rounding_mode_desc): Add field mpc_mode. (rounding_modes): Add values for new field. (func_calc_method): Add value mpfr_fff_f. (func_calc_desc): Add mpfr_fff_f union field. (test_function): Add field exact_args. (FUNC): Add macro argument EXACT_ARGS. (FUNC_mpfr_f_f): Update call to FUNC. (FUNC_mpfr_f_f): Likewise. (FUNC_mpfr_ff_f): Likewise. (FUNC_mpfr_if_f): Likewise. (FUNC_mpc_c_f): Likewise. (FUNC_mpc_c_c): Likewise. (test_functions): Add fma. Update calls to FUNC. (handle_input_arg): Add argument exact_args. (add_test): Update call to handle_input_arg. (calc_generic_results): Add argument mode. Handle mpfr_fff_f. (output_for_one_input_case): Update call to calc_generic_results. Recalculate exact zero results in each rounding mode.
2014-02-18 21:48:51 +00:00
if (exact_args)
check_empty_list = true;
mpfr_init (tmp);
bool inexact = mpfr_strtofr (tmp, arg, &ep, 0, MPFR_RNDZ);
if (*ep != 0 || !mpfr_number_p (tmp))
error_at_line (EXIT_FAILURE, 0, filename, lineno,
"bad floating-point argument: '%s'", arg);
adjust_real (tmp, inexact);
mpfr_t rounded[rm_num_modes];
unsigned int exc_before[rm_num_modes];
unsigned int exc_after[rm_num_modes];
round_real (rounded, exc_before, exc_after, tmp, f);
mpfr_clear (tmp);
Move tests of fma from libm-test.inc to auto-libm-test-in. This patch moves tests of fma to auto-libm-test-in, adding the required support to gen-auto-libm-tests. Because fma can have exact zero results depending on the rounding mode, results of fma cannot always be determined from a single value computed in higher precision with a sticky bit. Thus, this patch adds support for recomputing results with the original MPFR/MPC function in the case where an exact zero is involved. (This also affects some results for cpow; when we start testing cpow in all rounding modes, I think it will be most appropriate to make those tests use IGNORE_ZERO_INF_SIGN, since ISO C does not attempt to determine signs of zero results, or special caes in general, for cpow, and I think signs of zero for cpow are beyond the scope of glibc's accuracy goals.) Simply treating the existing test inputs for fma like those for other functions (i.e., as representing the given value rounded up or down to any of the supported floating-point formats) increases the size of auto-libm-test-out by about 16MB (i.e., about half the file is fma test data). While rounded versions of tests are perfectly reasonable test inputs for fma, in this case having them seems excessive, so this patch allows functions to specify in gen-auto-libm-tests that the given test inputs are only to be interpreted exactly, not as corresponding to values rounded up and down. This reduces the size of the generated test data for fma to a more reasonable 2MB. A consequence of this patch is that fma is now tested for correct presence or absence of "inexact" exceptions, where previously this wasn't tested because I didn't want to try to add that test coverage manually to all the existing tests. As far as I know, the existing fma implementations are already correct in this regard. This patch provides the first cases where the gen-auto-libm-tests support for distinguishing before-rounding/after-rounding underflow actually produces separate entries in auto-libm-test-out (for functions without exactly determined results, the affected cases are all considered underflow-optional, so this only affects functions like fma with exactly determined results). I didn't see any signs of problems with this logic in the output. Tested x86_64 and x86. * math/auto-libm-test-in: Add tests of fma. * math/auto-libm-test-out: Regenerated. * math/libm-test.inc (fma_test_data): Use AUTO_TESTS_fff_f. (fma_towardzero_test_data): Likewise. (fma_downward_test_data): Likewise. (fma_upward_test_data): Likewise. * math/gen-auto-libm-tests.c (rounding_mode_desc): Add field mpc_mode. (rounding_modes): Add values for new field. (func_calc_method): Add value mpfr_fff_f. (func_calc_desc): Add mpfr_fff_f union field. (test_function): Add field exact_args. (FUNC): Add macro argument EXACT_ARGS. (FUNC_mpfr_f_f): Update call to FUNC. (FUNC_mpfr_f_f): Likewise. (FUNC_mpfr_ff_f): Likewise. (FUNC_mpfr_if_f): Likewise. (FUNC_mpc_c_f): Likewise. (FUNC_mpc_c_c): Likewise. (test_functions): Add fma. Update calls to FUNC. (handle_input_arg): Add argument exact_args. (add_test): Update call to handle_input_arg. (calc_generic_results): Add argument mode. Handle mpfr_fff_f. (output_for_one_input_case): Update call to calc_generic_results. Recalculate exact zero results in each rounding mode.
2014-02-18 21:48:51 +00:00
if (mpfr_number_p (rounded[rm_upward])
&& (!exact_args || mpfr_equal_p (rounded[rm_upward],
rounded[rm_downward])))
{
mpfr_init2 (extra_values[num_extra_values],
fp_formats[f].mant_dig);
assert_exact (mpfr_set (extra_values[num_extra_values],
rounded[rm_upward], MPFR_RNDN));
num_extra_values++;
}
Move tests of fma from libm-test.inc to auto-libm-test-in. This patch moves tests of fma to auto-libm-test-in, adding the required support to gen-auto-libm-tests. Because fma can have exact zero results depending on the rounding mode, results of fma cannot always be determined from a single value computed in higher precision with a sticky bit. Thus, this patch adds support for recomputing results with the original MPFR/MPC function in the case where an exact zero is involved. (This also affects some results for cpow; when we start testing cpow in all rounding modes, I think it will be most appropriate to make those tests use IGNORE_ZERO_INF_SIGN, since ISO C does not attempt to determine signs of zero results, or special caes in general, for cpow, and I think signs of zero for cpow are beyond the scope of glibc's accuracy goals.) Simply treating the existing test inputs for fma like those for other functions (i.e., as representing the given value rounded up or down to any of the supported floating-point formats) increases the size of auto-libm-test-out by about 16MB (i.e., about half the file is fma test data). While rounded versions of tests are perfectly reasonable test inputs for fma, in this case having them seems excessive, so this patch allows functions to specify in gen-auto-libm-tests that the given test inputs are only to be interpreted exactly, not as corresponding to values rounded up and down. This reduces the size of the generated test data for fma to a more reasonable 2MB. A consequence of this patch is that fma is now tested for correct presence or absence of "inexact" exceptions, where previously this wasn't tested because I didn't want to try to add that test coverage manually to all the existing tests. As far as I know, the existing fma implementations are already correct in this regard. This patch provides the first cases where the gen-auto-libm-tests support for distinguishing before-rounding/after-rounding underflow actually produces separate entries in auto-libm-test-out (for functions without exactly determined results, the affected cases are all considered underflow-optional, so this only affects functions like fma with exactly determined results). I didn't see any signs of problems with this logic in the output. Tested x86_64 and x86. * math/auto-libm-test-in: Add tests of fma. * math/auto-libm-test-out: Regenerated. * math/libm-test.inc (fma_test_data): Use AUTO_TESTS_fff_f. (fma_towardzero_test_data): Likewise. (fma_downward_test_data): Likewise. (fma_upward_test_data): Likewise. * math/gen-auto-libm-tests.c (rounding_mode_desc): Add field mpc_mode. (rounding_modes): Add values for new field. (func_calc_method): Add value mpfr_fff_f. (func_calc_desc): Add mpfr_fff_f union field. (test_function): Add field exact_args. (FUNC): Add macro argument EXACT_ARGS. (FUNC_mpfr_f_f): Update call to FUNC. (FUNC_mpfr_f_f): Likewise. (FUNC_mpfr_ff_f): Likewise. (FUNC_mpfr_if_f): Likewise. (FUNC_mpc_c_f): Likewise. (FUNC_mpc_c_c): Likewise. (test_functions): Add fma. Update calls to FUNC. (handle_input_arg): Add argument exact_args. (add_test): Update call to handle_input_arg. (calc_generic_results): Add argument mode. Handle mpfr_fff_f. (output_for_one_input_case): Update call to calc_generic_results. Recalculate exact zero results in each rounding mode.
2014-02-18 21:48:51 +00:00
if (mpfr_number_p (rounded[rm_downward]) && !exact_args)
{
mpfr_init2 (extra_values[num_extra_values],
fp_formats[f].mant_dig);
assert_exact (mpfr_set (extra_values[num_extra_values],
rounded[rm_downward], MPFR_RNDN));
num_extra_values++;
}
for (rounding_mode m = rm_first_mode; m < rm_num_modes; m++)
mpfr_clear (rounded[m]);
}
for (size_t i = 0; i < num_extra_values; i++)
{
bool found = false;
for (size_t j = 0; j < num_values; j++)
{
if (mpfr_equal_p (values[j].value.f, extra_values[i])
&& ((mpfr_signbit (values[j].value.f) != 0)
== (mpfr_signbit (extra_values[i]) != 0)))
{
found = true;
break;
}
}
if (!found)
{
assert (num_values < ARRAY_SIZE (values));
values[num_values].type = gtype_fp;
mpfr_init2 (values[num_values].value.f,
fp_formats[f].mant_dig);
assert_exact (mpfr_set (values[num_values].value.f,
extra_values[i], MPFR_RNDN));
num_values++;
}
mpfr_clear (extra_values[i]);
}
}
break;
case gtype_int:
num_values = 1;
values[0].type = gtype_int;
int ret = mpz_init_set_str (values[0].value.i, arg, 0);
if (ret != 0)
error_at_line (EXIT_FAILURE, 0, filename, lineno,
"bad integer argument: '%s'", arg);
break;
default:
abort ();
}
Move tests of fma from libm-test.inc to auto-libm-test-in. This patch moves tests of fma to auto-libm-test-in, adding the required support to gen-auto-libm-tests. Because fma can have exact zero results depending on the rounding mode, results of fma cannot always be determined from a single value computed in higher precision with a sticky bit. Thus, this patch adds support for recomputing results with the original MPFR/MPC function in the case where an exact zero is involved. (This also affects some results for cpow; when we start testing cpow in all rounding modes, I think it will be most appropriate to make those tests use IGNORE_ZERO_INF_SIGN, since ISO C does not attempt to determine signs of zero results, or special caes in general, for cpow, and I think signs of zero for cpow are beyond the scope of glibc's accuracy goals.) Simply treating the existing test inputs for fma like those for other functions (i.e., as representing the given value rounded up or down to any of the supported floating-point formats) increases the size of auto-libm-test-out by about 16MB (i.e., about half the file is fma test data). While rounded versions of tests are perfectly reasonable test inputs for fma, in this case having them seems excessive, so this patch allows functions to specify in gen-auto-libm-tests that the given test inputs are only to be interpreted exactly, not as corresponding to values rounded up and down. This reduces the size of the generated test data for fma to a more reasonable 2MB. A consequence of this patch is that fma is now tested for correct presence or absence of "inexact" exceptions, where previously this wasn't tested because I didn't want to try to add that test coverage manually to all the existing tests. As far as I know, the existing fma implementations are already correct in this regard. This patch provides the first cases where the gen-auto-libm-tests support for distinguishing before-rounding/after-rounding underflow actually produces separate entries in auto-libm-test-out (for functions without exactly determined results, the affected cases are all considered underflow-optional, so this only affects functions like fma with exactly determined results). I didn't see any signs of problems with this logic in the output. Tested x86_64 and x86. * math/auto-libm-test-in: Add tests of fma. * math/auto-libm-test-out: Regenerated. * math/libm-test.inc (fma_test_data): Use AUTO_TESTS_fff_f. (fma_towardzero_test_data): Likewise. (fma_downward_test_data): Likewise. (fma_upward_test_data): Likewise. * math/gen-auto-libm-tests.c (rounding_mode_desc): Add field mpc_mode. (rounding_modes): Add values for new field. (func_calc_method): Add value mpfr_fff_f. (func_calc_desc): Add mpfr_fff_f union field. (test_function): Add field exact_args. (FUNC): Add macro argument EXACT_ARGS. (FUNC_mpfr_f_f): Update call to FUNC. (FUNC_mpfr_f_f): Likewise. (FUNC_mpfr_ff_f): Likewise. (FUNC_mpfr_if_f): Likewise. (FUNC_mpc_c_f): Likewise. (FUNC_mpc_c_c): Likewise. (test_functions): Add fma. Update calls to FUNC. (handle_input_arg): Add argument exact_args. (add_test): Update call to handle_input_arg. (calc_generic_results): Add argument mode. Handle mpfr_fff_f. (output_for_one_input_case): Update call to calc_generic_results. Recalculate exact zero results in each rounding mode.
2014-02-18 21:48:51 +00:00
if (check_empty_list && num_values == 0)
error_at_line (EXIT_FAILURE, 0, filename, lineno,
"floating-point argument not exact for any format: '%s'",
arg);
assert (num_values > 0 && num_values <= ARRAY_SIZE (values));
if (it->num_input_cases >= SIZE_MAX / num_values)
error_at_line (EXIT_FAILURE, 0, filename, lineno, "too many input cases");
generic_value **old_inputs = it->inputs;
size_t new_num_input_cases = it->num_input_cases * num_values;
generic_value **new_inputs = xmalloc (new_num_input_cases
* sizeof (new_inputs[0]));
for (size_t i = 0; i < it->num_input_cases; i++)
{
for (size_t j = 0; j < num_values; j++)
{
size_t idx = i * num_values + j;
new_inputs[idx] = xmalloc ((num_prev_args + 1)
* sizeof (new_inputs[idx][0]));
for (size_t k = 0; k < num_prev_args; k++)
generic_value_copy (&new_inputs[idx][k], &old_inputs[i][k]);
generic_value_copy (&new_inputs[idx][num_prev_args], &values[j]);
}
for (size_t j = 0; j < num_prev_args; j++)
generic_value_free (&old_inputs[i][j]);
free (old_inputs[i]);
}
free (old_inputs);
for (size_t i = 0; i < num_values; i++)
generic_value_free (&values[i]);
it->inputs = new_inputs;
it->num_input_cases = new_num_input_cases;
}
/* Handle the input flag ARG (NUL-terminated), storing it in *FLAG.
The flag comes from file FILENAME, line LINENO. */
static void
handle_input_flag (char *arg, input_flag *flag,
const char *filename, unsigned int lineno)
{
char *ep = strchr (arg, ':');
if (ep == NULL)
{
ep = strchr (arg, 0);
assert (ep != NULL);
}
char c = *ep;
*ep = 0;
bool found = false;
for (input_flag_type i = flag_first_flag; i <= num_input_flag_types; i++)
{
if (strcmp (arg, input_flags[i]) == 0)
{
found = true;
flag->type = i;
break;
}
}
if (!found)
error_at_line (EXIT_FAILURE, 0, filename, lineno, "unknown flag: '%s'",
arg);
*ep = c;
if (c == 0)
flag->cond = NULL;
else
flag->cond = xstrdup (ep);
}
/* Add the test LINE (file FILENAME, line LINENO) to the test
data. */
static void
add_test (char *line, const char *filename, unsigned int lineno)
{
size_t num_tokens = 1;
char *p = line;
while ((p = strchr (p, ' ')) != NULL)
{
num_tokens++;
p++;
}
if (num_tokens < 2)
error_at_line (EXIT_FAILURE, 0, filename, lineno,
"line too short: '%s'", line);
p = strchr (line, ' ');
size_t func_name_len = p - line;
for (size_t i = 0; i < ARRAY_SIZE (test_functions); i++)
{
if (func_name_len == strlen (test_functions[i].name)
&& strncmp (line, test_functions[i].name, func_name_len) == 0)
{
test_function *tf = &test_functions[i];
if (num_tokens < 1 + tf->num_args)
error_at_line (EXIT_FAILURE, 0, filename, lineno,
"line too short: '%s'", line);
if (tf->num_tests == tf->num_tests_alloc)
{
tf->num_tests_alloc = 2 * tf->num_tests_alloc + 16;
tf->tests
= xrealloc (tf->tests,
tf->num_tests_alloc * sizeof (tf->tests[0]));
}
input_test *it = &tf->tests[tf->num_tests];
it->line = line;
it->num_input_cases = 1;
it->inputs = xmalloc (sizeof (it->inputs[0]));
it->inputs[0] = NULL;
it->old_output = NULL;
p++;
for (size_t j = 0; j < tf->num_args; j++)
{
char *ep = strchr (p, ' ');
if (ep == NULL)
{
ep = strchr (p, '\n');
assert (ep != NULL);
}
if (ep == p)
error_at_line (EXIT_FAILURE, 0, filename, lineno,
"empty token in line: '%s'", line);
for (char *t = p; t < ep; t++)
if (isspace ((unsigned char) *t))
error_at_line (EXIT_FAILURE, 0, filename, lineno,
"whitespace in token in line: '%s'", line);
char c = *ep;
*ep = 0;
handle_input_arg (p, it, j,
generic_arg_ret_type (tf->arg_types[j]),
Move tests of fma from libm-test.inc to auto-libm-test-in. This patch moves tests of fma to auto-libm-test-in, adding the required support to gen-auto-libm-tests. Because fma can have exact zero results depending on the rounding mode, results of fma cannot always be determined from a single value computed in higher precision with a sticky bit. Thus, this patch adds support for recomputing results with the original MPFR/MPC function in the case where an exact zero is involved. (This also affects some results for cpow; when we start testing cpow in all rounding modes, I think it will be most appropriate to make those tests use IGNORE_ZERO_INF_SIGN, since ISO C does not attempt to determine signs of zero results, or special caes in general, for cpow, and I think signs of zero for cpow are beyond the scope of glibc's accuracy goals.) Simply treating the existing test inputs for fma like those for other functions (i.e., as representing the given value rounded up or down to any of the supported floating-point formats) increases the size of auto-libm-test-out by about 16MB (i.e., about half the file is fma test data). While rounded versions of tests are perfectly reasonable test inputs for fma, in this case having them seems excessive, so this patch allows functions to specify in gen-auto-libm-tests that the given test inputs are only to be interpreted exactly, not as corresponding to values rounded up and down. This reduces the size of the generated test data for fma to a more reasonable 2MB. A consequence of this patch is that fma is now tested for correct presence or absence of "inexact" exceptions, where previously this wasn't tested because I didn't want to try to add that test coverage manually to all the existing tests. As far as I know, the existing fma implementations are already correct in this regard. This patch provides the first cases where the gen-auto-libm-tests support for distinguishing before-rounding/after-rounding underflow actually produces separate entries in auto-libm-test-out (for functions without exactly determined results, the affected cases are all considered underflow-optional, so this only affects functions like fma with exactly determined results). I didn't see any signs of problems with this logic in the output. Tested x86_64 and x86. * math/auto-libm-test-in: Add tests of fma. * math/auto-libm-test-out: Regenerated. * math/libm-test.inc (fma_test_data): Use AUTO_TESTS_fff_f. (fma_towardzero_test_data): Likewise. (fma_downward_test_data): Likewise. (fma_upward_test_data): Likewise. * math/gen-auto-libm-tests.c (rounding_mode_desc): Add field mpc_mode. (rounding_modes): Add values for new field. (func_calc_method): Add value mpfr_fff_f. (func_calc_desc): Add mpfr_fff_f union field. (test_function): Add field exact_args. (FUNC): Add macro argument EXACT_ARGS. (FUNC_mpfr_f_f): Update call to FUNC. (FUNC_mpfr_f_f): Likewise. (FUNC_mpfr_ff_f): Likewise. (FUNC_mpfr_if_f): Likewise. (FUNC_mpc_c_f): Likewise. (FUNC_mpc_c_c): Likewise. (test_functions): Add fma. Update calls to FUNC. (handle_input_arg): Add argument exact_args. (add_test): Update call to handle_input_arg. (calc_generic_results): Add argument mode. Handle mpfr_fff_f. (output_for_one_input_case): Update call to calc_generic_results. Recalculate exact zero results in each rounding mode.
2014-02-18 21:48:51 +00:00
tf->exact_args, filename, lineno);
*ep = c;
p = ep + 1;
}
it->num_flags = num_tokens - 1 - tf->num_args;
it->flags = xmalloc (it->num_flags * sizeof (it->flags[0]));
for (size_t j = 0; j < it->num_flags; j++)
{
char *ep = strchr (p, ' ');
if (ep == NULL)
{
ep = strchr (p, '\n');
assert (ep != NULL);
}
if (ep == p)
error_at_line (EXIT_FAILURE, 0, filename, lineno,
"empty token in line: '%s'", line);
for (char *t = p; t < ep; t++)
if (isspace ((unsigned char) *t))
error_at_line (EXIT_FAILURE, 0, filename, lineno,
"whitespace in token in line: '%s'", line);
char c = *ep;
*ep = 0;
handle_input_flag (p, &it->flags[j], filename, lineno);
*ep = c;
p = ep + 1;
}
assert (*p == 0);
tf->num_tests++;
return;
}
}
error_at_line (EXIT_FAILURE, 0, filename, lineno,
"unknown function in line: '%s'", line);
}
/* Read in the test input data from FILENAME. */
static void
read_input (const char *filename)
{
FILE *fp = fopen (filename, "r");
if (fp == NULL)
error (EXIT_FAILURE, errno, "open '%s'", filename);
unsigned int lineno = 0;
for (;;)
{
size_t size = 0;
char *line = NULL;
ssize_t ret = getline (&line, &size, fp);
if (ret == -1)
break;
lineno++;
if (line[0] == '#' || line[0] == '\n')
continue;
add_test (line, filename, lineno);
}
if (ferror (fp))
error (EXIT_FAILURE, errno, "read from '%s'", filename);
if (fclose (fp) != 0)
error (EXIT_FAILURE, errno, "close '%s'", filename);
}
/* Calculate the generic results (round-to-zero with sticky bit) for
Move tests of fma from libm-test.inc to auto-libm-test-in. This patch moves tests of fma to auto-libm-test-in, adding the required support to gen-auto-libm-tests. Because fma can have exact zero results depending on the rounding mode, results of fma cannot always be determined from a single value computed in higher precision with a sticky bit. Thus, this patch adds support for recomputing results with the original MPFR/MPC function in the case where an exact zero is involved. (This also affects some results for cpow; when we start testing cpow in all rounding modes, I think it will be most appropriate to make those tests use IGNORE_ZERO_INF_SIGN, since ISO C does not attempt to determine signs of zero results, or special caes in general, for cpow, and I think signs of zero for cpow are beyond the scope of glibc's accuracy goals.) Simply treating the existing test inputs for fma like those for other functions (i.e., as representing the given value rounded up or down to any of the supported floating-point formats) increases the size of auto-libm-test-out by about 16MB (i.e., about half the file is fma test data). While rounded versions of tests are perfectly reasonable test inputs for fma, in this case having them seems excessive, so this patch allows functions to specify in gen-auto-libm-tests that the given test inputs are only to be interpreted exactly, not as corresponding to values rounded up and down. This reduces the size of the generated test data for fma to a more reasonable 2MB. A consequence of this patch is that fma is now tested for correct presence or absence of "inexact" exceptions, where previously this wasn't tested because I didn't want to try to add that test coverage manually to all the existing tests. As far as I know, the existing fma implementations are already correct in this regard. This patch provides the first cases where the gen-auto-libm-tests support for distinguishing before-rounding/after-rounding underflow actually produces separate entries in auto-libm-test-out (for functions without exactly determined results, the affected cases are all considered underflow-optional, so this only affects functions like fma with exactly determined results). I didn't see any signs of problems with this logic in the output. Tested x86_64 and x86. * math/auto-libm-test-in: Add tests of fma. * math/auto-libm-test-out: Regenerated. * math/libm-test.inc (fma_test_data): Use AUTO_TESTS_fff_f. (fma_towardzero_test_data): Likewise. (fma_downward_test_data): Likewise. (fma_upward_test_data): Likewise. * math/gen-auto-libm-tests.c (rounding_mode_desc): Add field mpc_mode. (rounding_modes): Add values for new field. (func_calc_method): Add value mpfr_fff_f. (func_calc_desc): Add mpfr_fff_f union field. (test_function): Add field exact_args. (FUNC): Add macro argument EXACT_ARGS. (FUNC_mpfr_f_f): Update call to FUNC. (FUNC_mpfr_f_f): Likewise. (FUNC_mpfr_ff_f): Likewise. (FUNC_mpfr_if_f): Likewise. (FUNC_mpc_c_f): Likewise. (FUNC_mpc_c_c): Likewise. (test_functions): Add fma. Update calls to FUNC. (handle_input_arg): Add argument exact_args. (add_test): Update call to handle_input_arg. (calc_generic_results): Add argument mode. Handle mpfr_fff_f. (output_for_one_input_case): Update call to calc_generic_results. Recalculate exact zero results in each rounding mode.
2014-02-18 21:48:51 +00:00
the function described by CALC, with inputs INPUTS, if MODE is
rm_towardzero; for other modes, calculate results in that mode,
which must be exact zero results. */
static void
calc_generic_results (generic_value *outputs, generic_value *inputs,
Move tests of fma from libm-test.inc to auto-libm-test-in. This patch moves tests of fma to auto-libm-test-in, adding the required support to gen-auto-libm-tests. Because fma can have exact zero results depending on the rounding mode, results of fma cannot always be determined from a single value computed in higher precision with a sticky bit. Thus, this patch adds support for recomputing results with the original MPFR/MPC function in the case where an exact zero is involved. (This also affects some results for cpow; when we start testing cpow in all rounding modes, I think it will be most appropriate to make those tests use IGNORE_ZERO_INF_SIGN, since ISO C does not attempt to determine signs of zero results, or special caes in general, for cpow, and I think signs of zero for cpow are beyond the scope of glibc's accuracy goals.) Simply treating the existing test inputs for fma like those for other functions (i.e., as representing the given value rounded up or down to any of the supported floating-point formats) increases the size of auto-libm-test-out by about 16MB (i.e., about half the file is fma test data). While rounded versions of tests are perfectly reasonable test inputs for fma, in this case having them seems excessive, so this patch allows functions to specify in gen-auto-libm-tests that the given test inputs are only to be interpreted exactly, not as corresponding to values rounded up and down. This reduces the size of the generated test data for fma to a more reasonable 2MB. A consequence of this patch is that fma is now tested for correct presence or absence of "inexact" exceptions, where previously this wasn't tested because I didn't want to try to add that test coverage manually to all the existing tests. As far as I know, the existing fma implementations are already correct in this regard. This patch provides the first cases where the gen-auto-libm-tests support for distinguishing before-rounding/after-rounding underflow actually produces separate entries in auto-libm-test-out (for functions without exactly determined results, the affected cases are all considered underflow-optional, so this only affects functions like fma with exactly determined results). I didn't see any signs of problems with this logic in the output. Tested x86_64 and x86. * math/auto-libm-test-in: Add tests of fma. * math/auto-libm-test-out: Regenerated. * math/libm-test.inc (fma_test_data): Use AUTO_TESTS_fff_f. (fma_towardzero_test_data): Likewise. (fma_downward_test_data): Likewise. (fma_upward_test_data): Likewise. * math/gen-auto-libm-tests.c (rounding_mode_desc): Add field mpc_mode. (rounding_modes): Add values for new field. (func_calc_method): Add value mpfr_fff_f. (func_calc_desc): Add mpfr_fff_f union field. (test_function): Add field exact_args. (FUNC): Add macro argument EXACT_ARGS. (FUNC_mpfr_f_f): Update call to FUNC. (FUNC_mpfr_f_f): Likewise. (FUNC_mpfr_ff_f): Likewise. (FUNC_mpfr_if_f): Likewise. (FUNC_mpc_c_f): Likewise. (FUNC_mpc_c_c): Likewise. (test_functions): Add fma. Update calls to FUNC. (handle_input_arg): Add argument exact_args. (add_test): Update call to handle_input_arg. (calc_generic_results): Add argument mode. Handle mpfr_fff_f. (output_for_one_input_case): Update call to calc_generic_results. Recalculate exact zero results in each rounding mode.
2014-02-18 21:48:51 +00:00
const func_calc_desc *calc, rounding_mode mode)
{
bool inexact;
int mpc_ternary;
mpc_t ci1, ci2, co;
Move tests of fma from libm-test.inc to auto-libm-test-in. This patch moves tests of fma to auto-libm-test-in, adding the required support to gen-auto-libm-tests. Because fma can have exact zero results depending on the rounding mode, results of fma cannot always be determined from a single value computed in higher precision with a sticky bit. Thus, this patch adds support for recomputing results with the original MPFR/MPC function in the case where an exact zero is involved. (This also affects some results for cpow; when we start testing cpow in all rounding modes, I think it will be most appropriate to make those tests use IGNORE_ZERO_INF_SIGN, since ISO C does not attempt to determine signs of zero results, or special caes in general, for cpow, and I think signs of zero for cpow are beyond the scope of glibc's accuracy goals.) Simply treating the existing test inputs for fma like those for other functions (i.e., as representing the given value rounded up or down to any of the supported floating-point formats) increases the size of auto-libm-test-out by about 16MB (i.e., about half the file is fma test data). While rounded versions of tests are perfectly reasonable test inputs for fma, in this case having them seems excessive, so this patch allows functions to specify in gen-auto-libm-tests that the given test inputs are only to be interpreted exactly, not as corresponding to values rounded up and down. This reduces the size of the generated test data for fma to a more reasonable 2MB. A consequence of this patch is that fma is now tested for correct presence or absence of "inexact" exceptions, where previously this wasn't tested because I didn't want to try to add that test coverage manually to all the existing tests. As far as I know, the existing fma implementations are already correct in this regard. This patch provides the first cases where the gen-auto-libm-tests support for distinguishing before-rounding/after-rounding underflow actually produces separate entries in auto-libm-test-out (for functions without exactly determined results, the affected cases are all considered underflow-optional, so this only affects functions like fma with exactly determined results). I didn't see any signs of problems with this logic in the output. Tested x86_64 and x86. * math/auto-libm-test-in: Add tests of fma. * math/auto-libm-test-out: Regenerated. * math/libm-test.inc (fma_test_data): Use AUTO_TESTS_fff_f. (fma_towardzero_test_data): Likewise. (fma_downward_test_data): Likewise. (fma_upward_test_data): Likewise. * math/gen-auto-libm-tests.c (rounding_mode_desc): Add field mpc_mode. (rounding_modes): Add values for new field. (func_calc_method): Add value mpfr_fff_f. (func_calc_desc): Add mpfr_fff_f union field. (test_function): Add field exact_args. (FUNC): Add macro argument EXACT_ARGS. (FUNC_mpfr_f_f): Update call to FUNC. (FUNC_mpfr_f_f): Likewise. (FUNC_mpfr_ff_f): Likewise. (FUNC_mpfr_if_f): Likewise. (FUNC_mpc_c_f): Likewise. (FUNC_mpc_c_c): Likewise. (test_functions): Add fma. Update calls to FUNC. (handle_input_arg): Add argument exact_args. (add_test): Update call to handle_input_arg. (calc_generic_results): Add argument mode. Handle mpfr_fff_f. (output_for_one_input_case): Update call to calc_generic_results. Recalculate exact zero results in each rounding mode.
2014-02-18 21:48:51 +00:00
mpfr_rnd_t mode_mpfr = rounding_modes[mode].mpfr_mode;
mpc_rnd_t mode_mpc = rounding_modes[mode].mpc_mode;
switch (calc->method)
{
case mpfr_f_f:
assert (inputs[0].type == gtype_fp);
outputs[0].type = gtype_fp;
mpfr_init (outputs[0].value.f);
inexact = calc->func.mpfr_f_f (outputs[0].value.f, inputs[0].value.f,
Move tests of fma from libm-test.inc to auto-libm-test-in. This patch moves tests of fma to auto-libm-test-in, adding the required support to gen-auto-libm-tests. Because fma can have exact zero results depending on the rounding mode, results of fma cannot always be determined from a single value computed in higher precision with a sticky bit. Thus, this patch adds support for recomputing results with the original MPFR/MPC function in the case where an exact zero is involved. (This also affects some results for cpow; when we start testing cpow in all rounding modes, I think it will be most appropriate to make those tests use IGNORE_ZERO_INF_SIGN, since ISO C does not attempt to determine signs of zero results, or special caes in general, for cpow, and I think signs of zero for cpow are beyond the scope of glibc's accuracy goals.) Simply treating the existing test inputs for fma like those for other functions (i.e., as representing the given value rounded up or down to any of the supported floating-point formats) increases the size of auto-libm-test-out by about 16MB (i.e., about half the file is fma test data). While rounded versions of tests are perfectly reasonable test inputs for fma, in this case having them seems excessive, so this patch allows functions to specify in gen-auto-libm-tests that the given test inputs are only to be interpreted exactly, not as corresponding to values rounded up and down. This reduces the size of the generated test data for fma to a more reasonable 2MB. A consequence of this patch is that fma is now tested for correct presence or absence of "inexact" exceptions, where previously this wasn't tested because I didn't want to try to add that test coverage manually to all the existing tests. As far as I know, the existing fma implementations are already correct in this regard. This patch provides the first cases where the gen-auto-libm-tests support for distinguishing before-rounding/after-rounding underflow actually produces separate entries in auto-libm-test-out (for functions without exactly determined results, the affected cases are all considered underflow-optional, so this only affects functions like fma with exactly determined results). I didn't see any signs of problems with this logic in the output. Tested x86_64 and x86. * math/auto-libm-test-in: Add tests of fma. * math/auto-libm-test-out: Regenerated. * math/libm-test.inc (fma_test_data): Use AUTO_TESTS_fff_f. (fma_towardzero_test_data): Likewise. (fma_downward_test_data): Likewise. (fma_upward_test_data): Likewise. * math/gen-auto-libm-tests.c (rounding_mode_desc): Add field mpc_mode. (rounding_modes): Add values for new field. (func_calc_method): Add value mpfr_fff_f. (func_calc_desc): Add mpfr_fff_f union field. (test_function): Add field exact_args. (FUNC): Add macro argument EXACT_ARGS. (FUNC_mpfr_f_f): Update call to FUNC. (FUNC_mpfr_f_f): Likewise. (FUNC_mpfr_ff_f): Likewise. (FUNC_mpfr_if_f): Likewise. (FUNC_mpc_c_f): Likewise. (FUNC_mpc_c_c): Likewise. (test_functions): Add fma. Update calls to FUNC. (handle_input_arg): Add argument exact_args. (add_test): Update call to handle_input_arg. (calc_generic_results): Add argument mode. Handle mpfr_fff_f. (output_for_one_input_case): Update call to calc_generic_results. Recalculate exact zero results in each rounding mode.
2014-02-18 21:48:51 +00:00
mode_mpfr);
if (mode != rm_towardzero)
assert (!inexact && mpfr_zero_p (outputs[0].value.f));
adjust_real (outputs[0].value.f, inexact);
break;
case mpfr_ff_f:
assert (inputs[0].type == gtype_fp);
assert (inputs[1].type == gtype_fp);
outputs[0].type = gtype_fp;
mpfr_init (outputs[0].value.f);
inexact = calc->func.mpfr_ff_f (outputs[0].value.f, inputs[0].value.f,
Move tests of fma from libm-test.inc to auto-libm-test-in. This patch moves tests of fma to auto-libm-test-in, adding the required support to gen-auto-libm-tests. Because fma can have exact zero results depending on the rounding mode, results of fma cannot always be determined from a single value computed in higher precision with a sticky bit. Thus, this patch adds support for recomputing results with the original MPFR/MPC function in the case where an exact zero is involved. (This also affects some results for cpow; when we start testing cpow in all rounding modes, I think it will be most appropriate to make those tests use IGNORE_ZERO_INF_SIGN, since ISO C does not attempt to determine signs of zero results, or special caes in general, for cpow, and I think signs of zero for cpow are beyond the scope of glibc's accuracy goals.) Simply treating the existing test inputs for fma like those for other functions (i.e., as representing the given value rounded up or down to any of the supported floating-point formats) increases the size of auto-libm-test-out by about 16MB (i.e., about half the file is fma test data). While rounded versions of tests are perfectly reasonable test inputs for fma, in this case having them seems excessive, so this patch allows functions to specify in gen-auto-libm-tests that the given test inputs are only to be interpreted exactly, not as corresponding to values rounded up and down. This reduces the size of the generated test data for fma to a more reasonable 2MB. A consequence of this patch is that fma is now tested for correct presence or absence of "inexact" exceptions, where previously this wasn't tested because I didn't want to try to add that test coverage manually to all the existing tests. As far as I know, the existing fma implementations are already correct in this regard. This patch provides the first cases where the gen-auto-libm-tests support for distinguishing before-rounding/after-rounding underflow actually produces separate entries in auto-libm-test-out (for functions without exactly determined results, the affected cases are all considered underflow-optional, so this only affects functions like fma with exactly determined results). I didn't see any signs of problems with this logic in the output. Tested x86_64 and x86. * math/auto-libm-test-in: Add tests of fma. * math/auto-libm-test-out: Regenerated. * math/libm-test.inc (fma_test_data): Use AUTO_TESTS_fff_f. (fma_towardzero_test_data): Likewise. (fma_downward_test_data): Likewise. (fma_upward_test_data): Likewise. * math/gen-auto-libm-tests.c (rounding_mode_desc): Add field mpc_mode. (rounding_modes): Add values for new field. (func_calc_method): Add value mpfr_fff_f. (func_calc_desc): Add mpfr_fff_f union field. (test_function): Add field exact_args. (FUNC): Add macro argument EXACT_ARGS. (FUNC_mpfr_f_f): Update call to FUNC. (FUNC_mpfr_f_f): Likewise. (FUNC_mpfr_ff_f): Likewise. (FUNC_mpfr_if_f): Likewise. (FUNC_mpc_c_f): Likewise. (FUNC_mpc_c_c): Likewise. (test_functions): Add fma. Update calls to FUNC. (handle_input_arg): Add argument exact_args. (add_test): Update call to handle_input_arg. (calc_generic_results): Add argument mode. Handle mpfr_fff_f. (output_for_one_input_case): Update call to calc_generic_results. Recalculate exact zero results in each rounding mode.
2014-02-18 21:48:51 +00:00
inputs[1].value.f, mode_mpfr);
if (mode != rm_towardzero)
assert (!inexact && mpfr_zero_p (outputs[0].value.f));
adjust_real (outputs[0].value.f, inexact);
break;
case mpfr_fff_f:
assert (inputs[0].type == gtype_fp);
assert (inputs[1].type == gtype_fp);
assert (inputs[2].type == gtype_fp);
outputs[0].type = gtype_fp;
mpfr_init (outputs[0].value.f);
inexact = calc->func.mpfr_fff_f (outputs[0].value.f, inputs[0].value.f,
inputs[1].value.f, inputs[2].value.f,
mode_mpfr);
if (mode != rm_towardzero)
assert (!inexact && mpfr_zero_p (outputs[0].value.f));
adjust_real (outputs[0].value.f, inexact);
break;
case mpfr_f_f1:
assert (inputs[0].type == gtype_fp);
outputs[0].type = gtype_fp;
outputs[1].type = gtype_int;
mpfr_init (outputs[0].value.f);
int i = 0;
inexact = calc->func.mpfr_f_f1 (outputs[0].value.f, &i,
Move tests of fma from libm-test.inc to auto-libm-test-in. This patch moves tests of fma to auto-libm-test-in, adding the required support to gen-auto-libm-tests. Because fma can have exact zero results depending on the rounding mode, results of fma cannot always be determined from a single value computed in higher precision with a sticky bit. Thus, this patch adds support for recomputing results with the original MPFR/MPC function in the case where an exact zero is involved. (This also affects some results for cpow; when we start testing cpow in all rounding modes, I think it will be most appropriate to make those tests use IGNORE_ZERO_INF_SIGN, since ISO C does not attempt to determine signs of zero results, or special caes in general, for cpow, and I think signs of zero for cpow are beyond the scope of glibc's accuracy goals.) Simply treating the existing test inputs for fma like those for other functions (i.e., as representing the given value rounded up or down to any of the supported floating-point formats) increases the size of auto-libm-test-out by about 16MB (i.e., about half the file is fma test data). While rounded versions of tests are perfectly reasonable test inputs for fma, in this case having them seems excessive, so this patch allows functions to specify in gen-auto-libm-tests that the given test inputs are only to be interpreted exactly, not as corresponding to values rounded up and down. This reduces the size of the generated test data for fma to a more reasonable 2MB. A consequence of this patch is that fma is now tested for correct presence or absence of "inexact" exceptions, where previously this wasn't tested because I didn't want to try to add that test coverage manually to all the existing tests. As far as I know, the existing fma implementations are already correct in this regard. This patch provides the first cases where the gen-auto-libm-tests support for distinguishing before-rounding/after-rounding underflow actually produces separate entries in auto-libm-test-out (for functions without exactly determined results, the affected cases are all considered underflow-optional, so this only affects functions like fma with exactly determined results). I didn't see any signs of problems with this logic in the output. Tested x86_64 and x86. * math/auto-libm-test-in: Add tests of fma. * math/auto-libm-test-out: Regenerated. * math/libm-test.inc (fma_test_data): Use AUTO_TESTS_fff_f. (fma_towardzero_test_data): Likewise. (fma_downward_test_data): Likewise. (fma_upward_test_data): Likewise. * math/gen-auto-libm-tests.c (rounding_mode_desc): Add field mpc_mode. (rounding_modes): Add values for new field. (func_calc_method): Add value mpfr_fff_f. (func_calc_desc): Add mpfr_fff_f union field. (test_function): Add field exact_args. (FUNC): Add macro argument EXACT_ARGS. (FUNC_mpfr_f_f): Update call to FUNC. (FUNC_mpfr_f_f): Likewise. (FUNC_mpfr_ff_f): Likewise. (FUNC_mpfr_if_f): Likewise. (FUNC_mpc_c_f): Likewise. (FUNC_mpc_c_c): Likewise. (test_functions): Add fma. Update calls to FUNC. (handle_input_arg): Add argument exact_args. (add_test): Update call to handle_input_arg. (calc_generic_results): Add argument mode. Handle mpfr_fff_f. (output_for_one_input_case): Update call to calc_generic_results. Recalculate exact zero results in each rounding mode.
2014-02-18 21:48:51 +00:00
inputs[0].value.f, mode_mpfr);
if (mode != rm_towardzero)
assert (!inexact && mpfr_zero_p (outputs[0].value.f));
adjust_real (outputs[0].value.f, inexact);
mpz_init_set_si (outputs[1].value.i, i);
break;
case mpfr_if_f:
assert (inputs[0].type == gtype_int);
assert (inputs[1].type == gtype_fp);
outputs[0].type = gtype_fp;
mpfr_init (outputs[0].value.f);
assert (mpz_fits_slong_p (inputs[0].value.i));
long l = mpz_get_si (inputs[0].value.i);
inexact = calc->func.mpfr_if_f (outputs[0].value.f, l,
Move tests of fma from libm-test.inc to auto-libm-test-in. This patch moves tests of fma to auto-libm-test-in, adding the required support to gen-auto-libm-tests. Because fma can have exact zero results depending on the rounding mode, results of fma cannot always be determined from a single value computed in higher precision with a sticky bit. Thus, this patch adds support for recomputing results with the original MPFR/MPC function in the case where an exact zero is involved. (This also affects some results for cpow; when we start testing cpow in all rounding modes, I think it will be most appropriate to make those tests use IGNORE_ZERO_INF_SIGN, since ISO C does not attempt to determine signs of zero results, or special caes in general, for cpow, and I think signs of zero for cpow are beyond the scope of glibc's accuracy goals.) Simply treating the existing test inputs for fma like those for other functions (i.e., as representing the given value rounded up or down to any of the supported floating-point formats) increases the size of auto-libm-test-out by about 16MB (i.e., about half the file is fma test data). While rounded versions of tests are perfectly reasonable test inputs for fma, in this case having them seems excessive, so this patch allows functions to specify in gen-auto-libm-tests that the given test inputs are only to be interpreted exactly, not as corresponding to values rounded up and down. This reduces the size of the generated test data for fma to a more reasonable 2MB. A consequence of this patch is that fma is now tested for correct presence or absence of "inexact" exceptions, where previously this wasn't tested because I didn't want to try to add that test coverage manually to all the existing tests. As far as I know, the existing fma implementations are already correct in this regard. This patch provides the first cases where the gen-auto-libm-tests support for distinguishing before-rounding/after-rounding underflow actually produces separate entries in auto-libm-test-out (for functions without exactly determined results, the affected cases are all considered underflow-optional, so this only affects functions like fma with exactly determined results). I didn't see any signs of problems with this logic in the output. Tested x86_64 and x86. * math/auto-libm-test-in: Add tests of fma. * math/auto-libm-test-out: Regenerated. * math/libm-test.inc (fma_test_data): Use AUTO_TESTS_fff_f. (fma_towardzero_test_data): Likewise. (fma_downward_test_data): Likewise. (fma_upward_test_data): Likewise. * math/gen-auto-libm-tests.c (rounding_mode_desc): Add field mpc_mode. (rounding_modes): Add values for new field. (func_calc_method): Add value mpfr_fff_f. (func_calc_desc): Add mpfr_fff_f union field. (test_function): Add field exact_args. (FUNC): Add macro argument EXACT_ARGS. (FUNC_mpfr_f_f): Update call to FUNC. (FUNC_mpfr_f_f): Likewise. (FUNC_mpfr_ff_f): Likewise. (FUNC_mpfr_if_f): Likewise. (FUNC_mpc_c_f): Likewise. (FUNC_mpc_c_c): Likewise. (test_functions): Add fma. Update calls to FUNC. (handle_input_arg): Add argument exact_args. (add_test): Update call to handle_input_arg. (calc_generic_results): Add argument mode. Handle mpfr_fff_f. (output_for_one_input_case): Update call to calc_generic_results. Recalculate exact zero results in each rounding mode.
2014-02-18 21:48:51 +00:00
inputs[1].value.f, mode_mpfr);
if (mode != rm_towardzero)
assert (!inexact && mpfr_zero_p (outputs[0].value.f));
adjust_real (outputs[0].value.f, inexact);
break;
case mpfr_f_11:
assert (inputs[0].type == gtype_fp);
outputs[0].type = gtype_fp;
mpfr_init (outputs[0].value.f);
outputs[1].type = gtype_fp;
mpfr_init (outputs[1].value.f);
int comb_ternary = calc->func.mpfr_f_11 (outputs[0].value.f,
outputs[1].value.f,
inputs[0].value.f,
Move tests of fma from libm-test.inc to auto-libm-test-in. This patch moves tests of fma to auto-libm-test-in, adding the required support to gen-auto-libm-tests. Because fma can have exact zero results depending on the rounding mode, results of fma cannot always be determined from a single value computed in higher precision with a sticky bit. Thus, this patch adds support for recomputing results with the original MPFR/MPC function in the case where an exact zero is involved. (This also affects some results for cpow; when we start testing cpow in all rounding modes, I think it will be most appropriate to make those tests use IGNORE_ZERO_INF_SIGN, since ISO C does not attempt to determine signs of zero results, or special caes in general, for cpow, and I think signs of zero for cpow are beyond the scope of glibc's accuracy goals.) Simply treating the existing test inputs for fma like those for other functions (i.e., as representing the given value rounded up or down to any of the supported floating-point formats) increases the size of auto-libm-test-out by about 16MB (i.e., about half the file is fma test data). While rounded versions of tests are perfectly reasonable test inputs for fma, in this case having them seems excessive, so this patch allows functions to specify in gen-auto-libm-tests that the given test inputs are only to be interpreted exactly, not as corresponding to values rounded up and down. This reduces the size of the generated test data for fma to a more reasonable 2MB. A consequence of this patch is that fma is now tested for correct presence or absence of "inexact" exceptions, where previously this wasn't tested because I didn't want to try to add that test coverage manually to all the existing tests. As far as I know, the existing fma implementations are already correct in this regard. This patch provides the first cases where the gen-auto-libm-tests support for distinguishing before-rounding/after-rounding underflow actually produces separate entries in auto-libm-test-out (for functions without exactly determined results, the affected cases are all considered underflow-optional, so this only affects functions like fma with exactly determined results). I didn't see any signs of problems with this logic in the output. Tested x86_64 and x86. * math/auto-libm-test-in: Add tests of fma. * math/auto-libm-test-out: Regenerated. * math/libm-test.inc (fma_test_data): Use AUTO_TESTS_fff_f. (fma_towardzero_test_data): Likewise. (fma_downward_test_data): Likewise. (fma_upward_test_data): Likewise. * math/gen-auto-libm-tests.c (rounding_mode_desc): Add field mpc_mode. (rounding_modes): Add values for new field. (func_calc_method): Add value mpfr_fff_f. (func_calc_desc): Add mpfr_fff_f union field. (test_function): Add field exact_args. (FUNC): Add macro argument EXACT_ARGS. (FUNC_mpfr_f_f): Update call to FUNC. (FUNC_mpfr_f_f): Likewise. (FUNC_mpfr_ff_f): Likewise. (FUNC_mpfr_if_f): Likewise. (FUNC_mpc_c_f): Likewise. (FUNC_mpc_c_c): Likewise. (test_functions): Add fma. Update calls to FUNC. (handle_input_arg): Add argument exact_args. (add_test): Update call to handle_input_arg. (calc_generic_results): Add argument mode. Handle mpfr_fff_f. (output_for_one_input_case): Update call to calc_generic_results. Recalculate exact zero results in each rounding mode.
2014-02-18 21:48:51 +00:00
mode_mpfr);
if (mode != rm_towardzero)
assert (((comb_ternary & 0x3) == 0
&& mpfr_zero_p (outputs[0].value.f))
|| ((comb_ternary & 0xc) == 0
&& mpfr_zero_p (outputs[1].value.f)));
adjust_real (outputs[0].value.f, (comb_ternary & 0x3) != 0);
adjust_real (outputs[1].value.f, (comb_ternary & 0xc) != 0);
break;
case mpc_c_f:
assert (inputs[0].type == gtype_fp);
assert (inputs[1].type == gtype_fp);
outputs[0].type = gtype_fp;
mpfr_init (outputs[0].value.f);
mpc_init2 (ci1, internal_precision);
assert_exact (mpc_set_fr_fr (ci1, inputs[0].value.f, inputs[1].value.f,
MPC_RNDNN));
Move tests of fma from libm-test.inc to auto-libm-test-in. This patch moves tests of fma to auto-libm-test-in, adding the required support to gen-auto-libm-tests. Because fma can have exact zero results depending on the rounding mode, results of fma cannot always be determined from a single value computed in higher precision with a sticky bit. Thus, this patch adds support for recomputing results with the original MPFR/MPC function in the case where an exact zero is involved. (This also affects some results for cpow; when we start testing cpow in all rounding modes, I think it will be most appropriate to make those tests use IGNORE_ZERO_INF_SIGN, since ISO C does not attempt to determine signs of zero results, or special caes in general, for cpow, and I think signs of zero for cpow are beyond the scope of glibc's accuracy goals.) Simply treating the existing test inputs for fma like those for other functions (i.e., as representing the given value rounded up or down to any of the supported floating-point formats) increases the size of auto-libm-test-out by about 16MB (i.e., about half the file is fma test data). While rounded versions of tests are perfectly reasonable test inputs for fma, in this case having them seems excessive, so this patch allows functions to specify in gen-auto-libm-tests that the given test inputs are only to be interpreted exactly, not as corresponding to values rounded up and down. This reduces the size of the generated test data for fma to a more reasonable 2MB. A consequence of this patch is that fma is now tested for correct presence or absence of "inexact" exceptions, where previously this wasn't tested because I didn't want to try to add that test coverage manually to all the existing tests. As far as I know, the existing fma implementations are already correct in this regard. This patch provides the first cases where the gen-auto-libm-tests support for distinguishing before-rounding/after-rounding underflow actually produces separate entries in auto-libm-test-out (for functions without exactly determined results, the affected cases are all considered underflow-optional, so this only affects functions like fma with exactly determined results). I didn't see any signs of problems with this logic in the output. Tested x86_64 and x86. * math/auto-libm-test-in: Add tests of fma. * math/auto-libm-test-out: Regenerated. * math/libm-test.inc (fma_test_data): Use AUTO_TESTS_fff_f. (fma_towardzero_test_data): Likewise. (fma_downward_test_data): Likewise. (fma_upward_test_data): Likewise. * math/gen-auto-libm-tests.c (rounding_mode_desc): Add field mpc_mode. (rounding_modes): Add values for new field. (func_calc_method): Add value mpfr_fff_f. (func_calc_desc): Add mpfr_fff_f union field. (test_function): Add field exact_args. (FUNC): Add macro argument EXACT_ARGS. (FUNC_mpfr_f_f): Update call to FUNC. (FUNC_mpfr_f_f): Likewise. (FUNC_mpfr_ff_f): Likewise. (FUNC_mpfr_if_f): Likewise. (FUNC_mpc_c_f): Likewise. (FUNC_mpc_c_c): Likewise. (test_functions): Add fma. Update calls to FUNC. (handle_input_arg): Add argument exact_args. (add_test): Update call to handle_input_arg. (calc_generic_results): Add argument mode. Handle mpfr_fff_f. (output_for_one_input_case): Update call to calc_generic_results. Recalculate exact zero results in each rounding mode.
2014-02-18 21:48:51 +00:00
inexact = calc->func.mpc_c_f (outputs[0].value.f, ci1, mode_mpfr);
if (mode != rm_towardzero)
assert (!inexact && mpfr_zero_p (outputs[0].value.f));
adjust_real (outputs[0].value.f, inexact);
mpc_clear (ci1);
break;
Move various TEST_c_c tests from libm-test.inc to auto-libm-test-inc. This patch moves tests of ccos, ccosh, cexp, clog, csqrt, ctan and ctanh to auto-libm-test-in, adding the required support to gen-auto-libm-tests. Other TEST_c_c functions aren't moved for now (although the relevant table entries are put in gen-auto-libm-tests for it to know how to handle them): clog10 because of a known MPC bug causing it to hang for at least some pure imaginary inputs (fixed in SVN, but I'd rather not rely on unreleased versions of MPFR or MPC even if relying on very recent releases); the inverse trig and hyperbolic functions because of known slowness in special cases; and csin / csinh because of observed slowness that I need to investigate and report to the MPC maintainers. Slowness can be bypassed by moving to incremental generation (only for new / changed tests) rather than regenerating the whole of auto-libm-test-out every time, but that needs implementing. (This patch takes the time for running gen-auto-libm-tests from about one second to seven, on my system, which I think is reasonable. The slow functions would make it take several minutes at least, which seems unreasonable.) Tested x86_64 and x86 and ulps updated accordingly. * math/auto-libm-test-in: Add tests of ccos, ccosh, cexp, clog, csqrt, ctan and ctanh. * math/auto-libm-test-out: Regenerated. * math/libm-test.inc (TEST_COND_x86_64): New macro. (TEST_COND_x86): Likewise. (ccos_test_data): Use AUTO_TESTS_c_c. (ccosh_test_data): Likewise. (cexp_test_data): Likewise. (clog_test_data): Likewise. (csqrt_test_data): Likewise. (ctan_test_data): Likewise. (ctan_tonearest_test_data): Likewise. (ctan_towardzero_test_data): Likewise. (ctan_downward_test_data): Likewise. (ctan_upward_test_data): Likewise. (ctanh_test_data): Likewise. (ctanh_tonearest_test_data): Likewise. (ctanh_towardzero_test_data): Likewise. (ctanh_downward_test_data): Likewise. (ctanh_upward_test_data): Likewise. * math/gen-auto-libm-tests.c (func_calc_method): Add value mpc_c_c. (func_calc_desc): Add mpc_c_c union field. (FUNC_mpc_c_c): New macro. (test_functions): Add cacos, cacosh, casin, casinh, catan, catanh, ccos, ccosh, cexp, clog, clog10, csin, csinh, csqrt, ctan and ctanh. (special_fill_min_subnorm_p120): New function. (special_real_inputs): Add min_subnorm_p120. (calc_generic_results): Handle mpc_c_c. * sysdeps/i386/fpu/libm-test-ulps: Update. * sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
2013-12-20 12:32:44 +00:00
case mpc_c_c:
assert (inputs[0].type == gtype_fp);
assert (inputs[1].type == gtype_fp);
outputs[0].type = gtype_fp;
mpfr_init (outputs[0].value.f);
outputs[1].type = gtype_fp;
mpfr_init (outputs[1].value.f);
mpc_init2 (ci1, internal_precision);
Move various TEST_c_c tests from libm-test.inc to auto-libm-test-inc. This patch moves tests of ccos, ccosh, cexp, clog, csqrt, ctan and ctanh to auto-libm-test-in, adding the required support to gen-auto-libm-tests. Other TEST_c_c functions aren't moved for now (although the relevant table entries are put in gen-auto-libm-tests for it to know how to handle them): clog10 because of a known MPC bug causing it to hang for at least some pure imaginary inputs (fixed in SVN, but I'd rather not rely on unreleased versions of MPFR or MPC even if relying on very recent releases); the inverse trig and hyperbolic functions because of known slowness in special cases; and csin / csinh because of observed slowness that I need to investigate and report to the MPC maintainers. Slowness can be bypassed by moving to incremental generation (only for new / changed tests) rather than regenerating the whole of auto-libm-test-out every time, but that needs implementing. (This patch takes the time for running gen-auto-libm-tests from about one second to seven, on my system, which I think is reasonable. The slow functions would make it take several minutes at least, which seems unreasonable.) Tested x86_64 and x86 and ulps updated accordingly. * math/auto-libm-test-in: Add tests of ccos, ccosh, cexp, clog, csqrt, ctan and ctanh. * math/auto-libm-test-out: Regenerated. * math/libm-test.inc (TEST_COND_x86_64): New macro. (TEST_COND_x86): Likewise. (ccos_test_data): Use AUTO_TESTS_c_c. (ccosh_test_data): Likewise. (cexp_test_data): Likewise. (clog_test_data): Likewise. (csqrt_test_data): Likewise. (ctan_test_data): Likewise. (ctan_tonearest_test_data): Likewise. (ctan_towardzero_test_data): Likewise. (ctan_downward_test_data): Likewise. (ctan_upward_test_data): Likewise. (ctanh_test_data): Likewise. (ctanh_tonearest_test_data): Likewise. (ctanh_towardzero_test_data): Likewise. (ctanh_downward_test_data): Likewise. (ctanh_upward_test_data): Likewise. * math/gen-auto-libm-tests.c (func_calc_method): Add value mpc_c_c. (func_calc_desc): Add mpc_c_c union field. (FUNC_mpc_c_c): New macro. (test_functions): Add cacos, cacosh, casin, casinh, catan, catanh, ccos, ccosh, cexp, clog, clog10, csin, csinh, csqrt, ctan and ctanh. (special_fill_min_subnorm_p120): New function. (special_real_inputs): Add min_subnorm_p120. (calc_generic_results): Handle mpc_c_c. * sysdeps/i386/fpu/libm-test-ulps: Update. * sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
2013-12-20 12:32:44 +00:00
mpc_init2 (co, internal_precision);
assert_exact (mpc_set_fr_fr (ci1, inputs[0].value.f, inputs[1].value.f,
MPC_RNDNN));
Move tests of fma from libm-test.inc to auto-libm-test-in. This patch moves tests of fma to auto-libm-test-in, adding the required support to gen-auto-libm-tests. Because fma can have exact zero results depending on the rounding mode, results of fma cannot always be determined from a single value computed in higher precision with a sticky bit. Thus, this patch adds support for recomputing results with the original MPFR/MPC function in the case where an exact zero is involved. (This also affects some results for cpow; when we start testing cpow in all rounding modes, I think it will be most appropriate to make those tests use IGNORE_ZERO_INF_SIGN, since ISO C does not attempt to determine signs of zero results, or special caes in general, for cpow, and I think signs of zero for cpow are beyond the scope of glibc's accuracy goals.) Simply treating the existing test inputs for fma like those for other functions (i.e., as representing the given value rounded up or down to any of the supported floating-point formats) increases the size of auto-libm-test-out by about 16MB (i.e., about half the file is fma test data). While rounded versions of tests are perfectly reasonable test inputs for fma, in this case having them seems excessive, so this patch allows functions to specify in gen-auto-libm-tests that the given test inputs are only to be interpreted exactly, not as corresponding to values rounded up and down. This reduces the size of the generated test data for fma to a more reasonable 2MB. A consequence of this patch is that fma is now tested for correct presence or absence of "inexact" exceptions, where previously this wasn't tested because I didn't want to try to add that test coverage manually to all the existing tests. As far as I know, the existing fma implementations are already correct in this regard. This patch provides the first cases where the gen-auto-libm-tests support for distinguishing before-rounding/after-rounding underflow actually produces separate entries in auto-libm-test-out (for functions without exactly determined results, the affected cases are all considered underflow-optional, so this only affects functions like fma with exactly determined results). I didn't see any signs of problems with this logic in the output. Tested x86_64 and x86. * math/auto-libm-test-in: Add tests of fma. * math/auto-libm-test-out: Regenerated. * math/libm-test.inc (fma_test_data): Use AUTO_TESTS_fff_f. (fma_towardzero_test_data): Likewise. (fma_downward_test_data): Likewise. (fma_upward_test_data): Likewise. * math/gen-auto-libm-tests.c (rounding_mode_desc): Add field mpc_mode. (rounding_modes): Add values for new field. (func_calc_method): Add value mpfr_fff_f. (func_calc_desc): Add mpfr_fff_f union field. (test_function): Add field exact_args. (FUNC): Add macro argument EXACT_ARGS. (FUNC_mpfr_f_f): Update call to FUNC. (FUNC_mpfr_f_f): Likewise. (FUNC_mpfr_ff_f): Likewise. (FUNC_mpfr_if_f): Likewise. (FUNC_mpc_c_f): Likewise. (FUNC_mpc_c_c): Likewise. (test_functions): Add fma. Update calls to FUNC. (handle_input_arg): Add argument exact_args. (add_test): Update call to handle_input_arg. (calc_generic_results): Add argument mode. Handle mpfr_fff_f. (output_for_one_input_case): Update call to calc_generic_results. Recalculate exact zero results in each rounding mode.
2014-02-18 21:48:51 +00:00
mpc_ternary = calc->func.mpc_c_c (co, ci1, mode_mpc);
if (mode != rm_towardzero)
assert ((!MPC_INEX_RE (mpc_ternary)
&& mpfr_zero_p (mpc_realref (co)))
|| (!MPC_INEX_IM (mpc_ternary)
&& mpfr_zero_p (mpc_imagref (co))));
assert_exact (mpfr_set (outputs[0].value.f, mpc_realref (co),
MPFR_RNDN));
assert_exact (mpfr_set (outputs[1].value.f, mpc_imagref (co),
MPFR_RNDN));
adjust_real (outputs[0].value.f, MPC_INEX_RE (mpc_ternary));
adjust_real (outputs[1].value.f, MPC_INEX_IM (mpc_ternary));
mpc_clear (ci1);
mpc_clear (co);
break;
case mpc_cc_c:
assert (inputs[0].type == gtype_fp);
assert (inputs[1].type == gtype_fp);
assert (inputs[2].type == gtype_fp);
assert (inputs[3].type == gtype_fp);
outputs[0].type = gtype_fp;
mpfr_init (outputs[0].value.f);
outputs[1].type = gtype_fp;
mpfr_init (outputs[1].value.f);
mpc_init2 (ci1, internal_precision);
mpc_init2 (ci2, internal_precision);
mpc_init2 (co, internal_precision);
assert_exact (mpc_set_fr_fr (ci1, inputs[0].value.f, inputs[1].value.f,
MPC_RNDNN));
assert_exact (mpc_set_fr_fr (ci2, inputs[2].value.f, inputs[3].value.f,
Move various TEST_c_c tests from libm-test.inc to auto-libm-test-inc. This patch moves tests of ccos, ccosh, cexp, clog, csqrt, ctan and ctanh to auto-libm-test-in, adding the required support to gen-auto-libm-tests. Other TEST_c_c functions aren't moved for now (although the relevant table entries are put in gen-auto-libm-tests for it to know how to handle them): clog10 because of a known MPC bug causing it to hang for at least some pure imaginary inputs (fixed in SVN, but I'd rather not rely on unreleased versions of MPFR or MPC even if relying on very recent releases); the inverse trig and hyperbolic functions because of known slowness in special cases; and csin / csinh because of observed slowness that I need to investigate and report to the MPC maintainers. Slowness can be bypassed by moving to incremental generation (only for new / changed tests) rather than regenerating the whole of auto-libm-test-out every time, but that needs implementing. (This patch takes the time for running gen-auto-libm-tests from about one second to seven, on my system, which I think is reasonable. The slow functions would make it take several minutes at least, which seems unreasonable.) Tested x86_64 and x86 and ulps updated accordingly. * math/auto-libm-test-in: Add tests of ccos, ccosh, cexp, clog, csqrt, ctan and ctanh. * math/auto-libm-test-out: Regenerated. * math/libm-test.inc (TEST_COND_x86_64): New macro. (TEST_COND_x86): Likewise. (ccos_test_data): Use AUTO_TESTS_c_c. (ccosh_test_data): Likewise. (cexp_test_data): Likewise. (clog_test_data): Likewise. (csqrt_test_data): Likewise. (ctan_test_data): Likewise. (ctan_tonearest_test_data): Likewise. (ctan_towardzero_test_data): Likewise. (ctan_downward_test_data): Likewise. (ctan_upward_test_data): Likewise. (ctanh_test_data): Likewise. (ctanh_tonearest_test_data): Likewise. (ctanh_towardzero_test_data): Likewise. (ctanh_downward_test_data): Likewise. (ctanh_upward_test_data): Likewise. * math/gen-auto-libm-tests.c (func_calc_method): Add value mpc_c_c. (func_calc_desc): Add mpc_c_c union field. (FUNC_mpc_c_c): New macro. (test_functions): Add cacos, cacosh, casin, casinh, catan, catanh, ccos, ccosh, cexp, clog, clog10, csin, csinh, csqrt, ctan and ctanh. (special_fill_min_subnorm_p120): New function. (special_real_inputs): Add min_subnorm_p120. (calc_generic_results): Handle mpc_c_c. * sysdeps/i386/fpu/libm-test-ulps: Update. * sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
2013-12-20 12:32:44 +00:00
MPC_RNDNN));
Move tests of fma from libm-test.inc to auto-libm-test-in. This patch moves tests of fma to auto-libm-test-in, adding the required support to gen-auto-libm-tests. Because fma can have exact zero results depending on the rounding mode, results of fma cannot always be determined from a single value computed in higher precision with a sticky bit. Thus, this patch adds support for recomputing results with the original MPFR/MPC function in the case where an exact zero is involved. (This also affects some results for cpow; when we start testing cpow in all rounding modes, I think it will be most appropriate to make those tests use IGNORE_ZERO_INF_SIGN, since ISO C does not attempt to determine signs of zero results, or special caes in general, for cpow, and I think signs of zero for cpow are beyond the scope of glibc's accuracy goals.) Simply treating the existing test inputs for fma like those for other functions (i.e., as representing the given value rounded up or down to any of the supported floating-point formats) increases the size of auto-libm-test-out by about 16MB (i.e., about half the file is fma test data). While rounded versions of tests are perfectly reasonable test inputs for fma, in this case having them seems excessive, so this patch allows functions to specify in gen-auto-libm-tests that the given test inputs are only to be interpreted exactly, not as corresponding to values rounded up and down. This reduces the size of the generated test data for fma to a more reasonable 2MB. A consequence of this patch is that fma is now tested for correct presence or absence of "inexact" exceptions, where previously this wasn't tested because I didn't want to try to add that test coverage manually to all the existing tests. As far as I know, the existing fma implementations are already correct in this regard. This patch provides the first cases where the gen-auto-libm-tests support for distinguishing before-rounding/after-rounding underflow actually produces separate entries in auto-libm-test-out (for functions without exactly determined results, the affected cases are all considered underflow-optional, so this only affects functions like fma with exactly determined results). I didn't see any signs of problems with this logic in the output. Tested x86_64 and x86. * math/auto-libm-test-in: Add tests of fma. * math/auto-libm-test-out: Regenerated. * math/libm-test.inc (fma_test_data): Use AUTO_TESTS_fff_f. (fma_towardzero_test_data): Likewise. (fma_downward_test_data): Likewise. (fma_upward_test_data): Likewise. * math/gen-auto-libm-tests.c (rounding_mode_desc): Add field mpc_mode. (rounding_modes): Add values for new field. (func_calc_method): Add value mpfr_fff_f. (func_calc_desc): Add mpfr_fff_f union field. (test_function): Add field exact_args. (FUNC): Add macro argument EXACT_ARGS. (FUNC_mpfr_f_f): Update call to FUNC. (FUNC_mpfr_f_f): Likewise. (FUNC_mpfr_ff_f): Likewise. (FUNC_mpfr_if_f): Likewise. (FUNC_mpc_c_f): Likewise. (FUNC_mpc_c_c): Likewise. (test_functions): Add fma. Update calls to FUNC. (handle_input_arg): Add argument exact_args. (add_test): Update call to handle_input_arg. (calc_generic_results): Add argument mode. Handle mpfr_fff_f. (output_for_one_input_case): Update call to calc_generic_results. Recalculate exact zero results in each rounding mode.
2014-02-18 21:48:51 +00:00
mpc_ternary = calc->func.mpc_cc_c (co, ci1, ci2, mode_mpc);
if (mode != rm_towardzero)
assert ((!MPC_INEX_RE (mpc_ternary)
&& mpfr_zero_p (mpc_realref (co)))
|| (!MPC_INEX_IM (mpc_ternary)
&& mpfr_zero_p (mpc_imagref (co))));
Move various TEST_c_c tests from libm-test.inc to auto-libm-test-inc. This patch moves tests of ccos, ccosh, cexp, clog, csqrt, ctan and ctanh to auto-libm-test-in, adding the required support to gen-auto-libm-tests. Other TEST_c_c functions aren't moved for now (although the relevant table entries are put in gen-auto-libm-tests for it to know how to handle them): clog10 because of a known MPC bug causing it to hang for at least some pure imaginary inputs (fixed in SVN, but I'd rather not rely on unreleased versions of MPFR or MPC even if relying on very recent releases); the inverse trig and hyperbolic functions because of known slowness in special cases; and csin / csinh because of observed slowness that I need to investigate and report to the MPC maintainers. Slowness can be bypassed by moving to incremental generation (only for new / changed tests) rather than regenerating the whole of auto-libm-test-out every time, but that needs implementing. (This patch takes the time for running gen-auto-libm-tests from about one second to seven, on my system, which I think is reasonable. The slow functions would make it take several minutes at least, which seems unreasonable.) Tested x86_64 and x86 and ulps updated accordingly. * math/auto-libm-test-in: Add tests of ccos, ccosh, cexp, clog, csqrt, ctan and ctanh. * math/auto-libm-test-out: Regenerated. * math/libm-test.inc (TEST_COND_x86_64): New macro. (TEST_COND_x86): Likewise. (ccos_test_data): Use AUTO_TESTS_c_c. (ccosh_test_data): Likewise. (cexp_test_data): Likewise. (clog_test_data): Likewise. (csqrt_test_data): Likewise. (ctan_test_data): Likewise. (ctan_tonearest_test_data): Likewise. (ctan_towardzero_test_data): Likewise. (ctan_downward_test_data): Likewise. (ctan_upward_test_data): Likewise. (ctanh_test_data): Likewise. (ctanh_tonearest_test_data): Likewise. (ctanh_towardzero_test_data): Likewise. (ctanh_downward_test_data): Likewise. (ctanh_upward_test_data): Likewise. * math/gen-auto-libm-tests.c (func_calc_method): Add value mpc_c_c. (func_calc_desc): Add mpc_c_c union field. (FUNC_mpc_c_c): New macro. (test_functions): Add cacos, cacosh, casin, casinh, catan, catanh, ccos, ccosh, cexp, clog, clog10, csin, csinh, csqrt, ctan and ctanh. (special_fill_min_subnorm_p120): New function. (special_real_inputs): Add min_subnorm_p120. (calc_generic_results): Handle mpc_c_c. * sysdeps/i386/fpu/libm-test-ulps: Update. * sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
2013-12-20 12:32:44 +00:00
assert_exact (mpfr_set (outputs[0].value.f, mpc_realref (co),
MPFR_RNDN));
assert_exact (mpfr_set (outputs[1].value.f, mpc_imagref (co),
MPFR_RNDN));
adjust_real (outputs[0].value.f, MPC_INEX_RE (mpc_ternary));
adjust_real (outputs[1].value.f, MPC_INEX_IM (mpc_ternary));
mpc_clear (ci1);
mpc_clear (ci2);
Move various TEST_c_c tests from libm-test.inc to auto-libm-test-inc. This patch moves tests of ccos, ccosh, cexp, clog, csqrt, ctan and ctanh to auto-libm-test-in, adding the required support to gen-auto-libm-tests. Other TEST_c_c functions aren't moved for now (although the relevant table entries are put in gen-auto-libm-tests for it to know how to handle them): clog10 because of a known MPC bug causing it to hang for at least some pure imaginary inputs (fixed in SVN, but I'd rather not rely on unreleased versions of MPFR or MPC even if relying on very recent releases); the inverse trig and hyperbolic functions because of known slowness in special cases; and csin / csinh because of observed slowness that I need to investigate and report to the MPC maintainers. Slowness can be bypassed by moving to incremental generation (only for new / changed tests) rather than regenerating the whole of auto-libm-test-out every time, but that needs implementing. (This patch takes the time for running gen-auto-libm-tests from about one second to seven, on my system, which I think is reasonable. The slow functions would make it take several minutes at least, which seems unreasonable.) Tested x86_64 and x86 and ulps updated accordingly. * math/auto-libm-test-in: Add tests of ccos, ccosh, cexp, clog, csqrt, ctan and ctanh. * math/auto-libm-test-out: Regenerated. * math/libm-test.inc (TEST_COND_x86_64): New macro. (TEST_COND_x86): Likewise. (ccos_test_data): Use AUTO_TESTS_c_c. (ccosh_test_data): Likewise. (cexp_test_data): Likewise. (clog_test_data): Likewise. (csqrt_test_data): Likewise. (ctan_test_data): Likewise. (ctan_tonearest_test_data): Likewise. (ctan_towardzero_test_data): Likewise. (ctan_downward_test_data): Likewise. (ctan_upward_test_data): Likewise. (ctanh_test_data): Likewise. (ctanh_tonearest_test_data): Likewise. (ctanh_towardzero_test_data): Likewise. (ctanh_downward_test_data): Likewise. (ctanh_upward_test_data): Likewise. * math/gen-auto-libm-tests.c (func_calc_method): Add value mpc_c_c. (func_calc_desc): Add mpc_c_c union field. (FUNC_mpc_c_c): New macro. (test_functions): Add cacos, cacosh, casin, casinh, catan, catanh, ccos, ccosh, cexp, clog, clog10, csin, csinh, csqrt, ctan and ctanh. (special_fill_min_subnorm_p120): New function. (special_real_inputs): Add min_subnorm_p120. (calc_generic_results): Handle mpc_c_c. * sysdeps/i386/fpu/libm-test-ulps: Update. * sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
2013-12-20 12:32:44 +00:00
mpc_clear (co);
break;
default:
abort ();
}
}
/* Return the number of bits for integer type TYPE, where "long" has
LONG_BITS bits (32 or 64). */
static int
int_type_bits (arg_ret_type type, int long_bits)
{
assert (long_bits == 32 || long_bits == 64);
switch (type)
{
case type_int:
return 32;
break;
case type_long:
return long_bits;
break;
case type_long_long:
return 64;
break;
default:
abort ();
}
}
/* Check whether an integer Z fits a given type TYPE, where "long" has
LONG_BITS bits (32 or 64). */
static bool
int_fits_type (mpz_t z, arg_ret_type type, int long_bits)
{
int bits = int_type_bits (type, long_bits);
bool ret = true;
mpz_t t;
mpz_init (t);
mpz_ui_pow_ui (t, 2, bits - 1);
if (mpz_cmp (z, t) >= 0)
ret = false;
mpz_neg (t, t);
if (mpz_cmp (z, t) < 0)
ret = false;
mpz_clear (t);
return ret;
}
/* Print a generic value V to FP (name FILENAME), preceded by a space,
for type TYPE, LONG_BITS bits per long, printing " IGNORE" instead
if IGNORE. */
static void
output_generic_value (FILE *fp, const char *filename, const generic_value *v,
bool ignore, arg_ret_type type, int long_bits)
{
if (ignore)
{
if (fputs (" IGNORE", fp) < 0)
error (EXIT_FAILURE, errno, "write to '%s'", filename);
return;
}
assert (v->type == generic_arg_ret_type (type));
const char *suffix;
switch (type)
{
case type_fp:
suffix = "";
break;
case type_int:
suffix = "";
break;
case type_long:
suffix = "L";
break;
case type_long_long:
suffix = "LL";
break;
default:
abort ();
}
switch (v->type)
{
case gtype_fp:
if (mpfr_inf_p (v->value.f))
{
if (fputs ((mpfr_signbit (v->value.f)
? " minus_infty" : " plus_infty"), fp) < 0)
error (EXIT_FAILURE, errno, "write to '%s'", filename);
}
else
{
assert (mpfr_number_p (v->value.f));
if (mpfr_fprintf (fp, " %Ra%s", v->value.f, suffix) < 0)
error (EXIT_FAILURE, errno, "mpfr_fprintf to '%s'", filename);
}
break;
case gtype_int: ;
int bits = int_type_bits (type, long_bits);
mpz_t tmp;
mpz_init (tmp);
mpz_ui_pow_ui (tmp, 2, bits - 1);
mpz_neg (tmp, tmp);
if (mpz_cmp (v->value.i, tmp) == 0)
{
mpz_add_ui (tmp, tmp, 1);
if (mpfr_fprintf (fp, " (%Zd%s-1)", tmp, suffix) < 0)
error (EXIT_FAILURE, errno, "mpfr_fprintf to '%s'", filename);
}
else
{
if (mpfr_fprintf (fp, " %Zd%s", v->value.i, suffix) < 0)
error (EXIT_FAILURE, errno, "mpfr_fprintf to '%s'", filename);
}
mpz_clear (tmp);
break;
default:
abort ();
}
}
Add test infrastructure for narrowing libm functions. This patch continues preparations for adding TS 18661-1 narrowing libm functions by adding the required testsuite infrastructure to test such functions through the libm-test infrastructure. That infrastructure is based around testing for a single type, FLOAT. For the narrowing functions, FLOAT, the "main" type for testing, is the function return type; the argument type is ARG_FLOAT. This is consistent with how the code built once for each type, libm-test-support.c, depends on FLOAT for such things as calculating ulps errors in results but can already handle different argument types (pointers, integers, long double for nexttoward). Makefile machinery is added to handle building tests for all pairs of types for which there are narrowing functions (as with non-narrowing functions, aliases are tested just the same as the functions they alias). gen-auto-libm-tests gains a --narrow option for building outputs for narrowing functions (so narrowing sqrt and fma will share the same inputs as non-narrowing, but gen-auto-libm-tests will be run with and without that option to generate different output files). In the narrowing case, the auto-libm-test-out-narrow-* files include annotations for each test about what properties ARG_FLOAT must have to be able to represent all the inputs for that test; those annotations result in calls to the TEST_COND_arg_fmt macro. gen-libm-test.pl has some minor updates to handle narrowing tests (for example, arguments in such tests must be surrounded by ARG_LIT calls instead of LIT calls). Various new macros are added to the C test support code (for example, sNaN initializers need to be properly typed, so arg_snan_value is added; other such arg_* macros are added as it seems cleanest to do so, though some are not strictly required). Special-casing of the ibm128 format to allow for its limitations is adjusted to handle it as the argument format as well as as the result format; thus, the tests of the new functions allow nonzero ulps only in the case where ibm128 is the argument format, as otherwise the functions correspond to fully-defined IEEE operations. The ulps in question appear as e.g. 'Function: "add_ldouble"' in libm-test-ulps (with 1ulp errors then listed for double and float for that function in powerpc); no support is added to generate corresponding faddl / daddl ulps listings in the ulps table in the manual. For the previous patch, I noted the need to avoid spurious macro expansions of identifiers such as "add". A test test-narrow-macros.c is added to verify such macro expansions are successfully avoided, and there is also a -mlong-double-64 version of that test for ldbl-opt. This test is set up to cover the full set of relevant identifiers from the start rather than adding functions one at a time as each function group is added. Tested for x86_64 (this patch in isolation, as well as testing for various configurations in conjunction with the actual addition of "add" functions). * math/Makefile (test-type-pairs): New variable. (test-type-pairs-f64xf128-yes): Likewise. (tests): Add test-narrow-macros. (libm-test-funcs-narrow): New variable. (libm-test-c-narrow): Likewise. (generated): Add $(libm-test-c-narrow). (libm-tests-base-narrow): New variable. (libm-tests-narrow): Likewise. (libm-tests): Add $(libm-tests-narrow). (libm-tests-for-type): Handle $(libm-tests-narrow). (libm-test-c-narrow-obj): New variable. ($(libm-test-c-narrow-obj)): New rule. ($(foreach t,$(libm-tests-narrow),$(objpfx)$(t).c)): Likewise. ($(foreach f,$(libm-test-funcs-narrow),$(objpfx)$(o)-$(f).o)): Use $(o-iterator) to set dependencies and CFLAGS. * math/gen-auto-libm-tests.c: Document use for narrowing functions. (output_for_one_input_case): Take argument NARROW. (generate_output): Likewise. Update call to output_for_one_input_case. (main): Take --narrow option. Update call to generate_output. * math/gen-libm-test.pl (_apply_lit): Take macro name as argument. (apply_lit): Update call to _apply_lit. (apply_arglit): New function. (parse_args): Handle "a" arguments. (parse_auto_input): Handle format names using ":". * math/README.libm-test: Document "a" parameter type. * math/libm-test-support.h (ARG_TYPE_MIN): New macro. (ARG_TYPE_TRUE_MIN): Likewise. (ARG_TYPE_MAX): Likwise. (ARG_MIN_EXP): Likewise. (ARG_MAX_EXP): Likewise. (ARG_MANT_DIG): Likewise. (TEST_COND_arg_ibm128): Likewise. (TEST_COND_ibm128_libgcc): Define conditional on [ARG_FLOAT]. (TEST_COND_arg_fmt): New macro. (init_max_error): Update prototype. * math/libm-test-support.c (test_ibm128): New variable. (init_max_error): Take argument testing_ibm128 and set test_ibm128 instead of using [TEST_COND_ibm128] conditional. (test_exceptions): Use test_ibm128 instead of TEST_COND_ibm128. * math/libm-test-driver.c (STR_ARG_FLOAT): New macro. [TEST_NARROW] (TEST_MSG): New definition. (arg_plus_zero): New macro. (arg_minus_zero): Likewise. (arg_plus_infty): Likewise. (arg_minus_infty): Likewise. (arg_qnan_value_pl): Likewise. (arg_qnan_value): Likewise. (arg_snan_value_pl): Likewise. (arg_snan_value): Likewise. (arg_max_value): Likewise. (arg_min_value): Likewise. (arg_min_subnorm_value): Likewise. [ARG_FLOAT] (struct test_aa_f_data): New struct type. (RUN_TEST_LOOP_aa_f): New macro. (TEST_SUFF): New macro. (TEST_SUFF_STR): Likewise. [!TEST_MATHVEC] (VEC_SUFF): Don't define. (TEST_COND_any_ibm128): New macro. (START): Use TEST_SUFF and TEST_SUFF_STR in initializer for this_func. Update call to init_max_error. * math/test-double.h (FUNC_NARROW_PREFIX): New macro. * math/test-float.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float128.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float32.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float32x.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float64.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float64x.h (FUNC_NARROW_PREFIX): Likewise. * math/test-math-scalar.h (TEST_NARROW): Likewise. * math/test-math-vector.h (TEST_NARROW): Likewise. * math/test-arg-double.h: New file. * math/test-arg-float128.h: Likewise. * math/test-arg-float32x.h: Likewise. * math/test-arg-float64.h: Likewise. * math/test-arg-float64x.h: Likewise. * math/test-arg-ldouble.h: Likewise. * math/test-math-narrow.h: Likewise. * math/test-narrow-macros.c: Likewise. * sysdeps/ieee754/ldbl-opt/test-narrow-macros-ldbl-64.c: Likewise. * sysdeps/ieee754/ldbl-opt/Makefile (tests): Add test-narrow-macros-ldbl-64. (CFLAGS-test-narrow-macros-ldbl-64.c): New variable.
2018-02-09 21:55:48 +00:00
/* Generate test output to FP (name FILENAME) for test function TF
(rounding results to a narrower type if NARROW), input test IT,
choice of input values INPUTS. */
static void
output_for_one_input_case (FILE *fp, const char *filename, test_function *tf,
Add test infrastructure for narrowing libm functions. This patch continues preparations for adding TS 18661-1 narrowing libm functions by adding the required testsuite infrastructure to test such functions through the libm-test infrastructure. That infrastructure is based around testing for a single type, FLOAT. For the narrowing functions, FLOAT, the "main" type for testing, is the function return type; the argument type is ARG_FLOAT. This is consistent with how the code built once for each type, libm-test-support.c, depends on FLOAT for such things as calculating ulps errors in results but can already handle different argument types (pointers, integers, long double for nexttoward). Makefile machinery is added to handle building tests for all pairs of types for which there are narrowing functions (as with non-narrowing functions, aliases are tested just the same as the functions they alias). gen-auto-libm-tests gains a --narrow option for building outputs for narrowing functions (so narrowing sqrt and fma will share the same inputs as non-narrowing, but gen-auto-libm-tests will be run with and without that option to generate different output files). In the narrowing case, the auto-libm-test-out-narrow-* files include annotations for each test about what properties ARG_FLOAT must have to be able to represent all the inputs for that test; those annotations result in calls to the TEST_COND_arg_fmt macro. gen-libm-test.pl has some minor updates to handle narrowing tests (for example, arguments in such tests must be surrounded by ARG_LIT calls instead of LIT calls). Various new macros are added to the C test support code (for example, sNaN initializers need to be properly typed, so arg_snan_value is added; other such arg_* macros are added as it seems cleanest to do so, though some are not strictly required). Special-casing of the ibm128 format to allow for its limitations is adjusted to handle it as the argument format as well as as the result format; thus, the tests of the new functions allow nonzero ulps only in the case where ibm128 is the argument format, as otherwise the functions correspond to fully-defined IEEE operations. The ulps in question appear as e.g. 'Function: "add_ldouble"' in libm-test-ulps (with 1ulp errors then listed for double and float for that function in powerpc); no support is added to generate corresponding faddl / daddl ulps listings in the ulps table in the manual. For the previous patch, I noted the need to avoid spurious macro expansions of identifiers such as "add". A test test-narrow-macros.c is added to verify such macro expansions are successfully avoided, and there is also a -mlong-double-64 version of that test for ldbl-opt. This test is set up to cover the full set of relevant identifiers from the start rather than adding functions one at a time as each function group is added. Tested for x86_64 (this patch in isolation, as well as testing for various configurations in conjunction with the actual addition of "add" functions). * math/Makefile (test-type-pairs): New variable. (test-type-pairs-f64xf128-yes): Likewise. (tests): Add test-narrow-macros. (libm-test-funcs-narrow): New variable. (libm-test-c-narrow): Likewise. (generated): Add $(libm-test-c-narrow). (libm-tests-base-narrow): New variable. (libm-tests-narrow): Likewise. (libm-tests): Add $(libm-tests-narrow). (libm-tests-for-type): Handle $(libm-tests-narrow). (libm-test-c-narrow-obj): New variable. ($(libm-test-c-narrow-obj)): New rule. ($(foreach t,$(libm-tests-narrow),$(objpfx)$(t).c)): Likewise. ($(foreach f,$(libm-test-funcs-narrow),$(objpfx)$(o)-$(f).o)): Use $(o-iterator) to set dependencies and CFLAGS. * math/gen-auto-libm-tests.c: Document use for narrowing functions. (output_for_one_input_case): Take argument NARROW. (generate_output): Likewise. Update call to output_for_one_input_case. (main): Take --narrow option. Update call to generate_output. * math/gen-libm-test.pl (_apply_lit): Take macro name as argument. (apply_lit): Update call to _apply_lit. (apply_arglit): New function. (parse_args): Handle "a" arguments. (parse_auto_input): Handle format names using ":". * math/README.libm-test: Document "a" parameter type. * math/libm-test-support.h (ARG_TYPE_MIN): New macro. (ARG_TYPE_TRUE_MIN): Likewise. (ARG_TYPE_MAX): Likwise. (ARG_MIN_EXP): Likewise. (ARG_MAX_EXP): Likewise. (ARG_MANT_DIG): Likewise. (TEST_COND_arg_ibm128): Likewise. (TEST_COND_ibm128_libgcc): Define conditional on [ARG_FLOAT]. (TEST_COND_arg_fmt): New macro. (init_max_error): Update prototype. * math/libm-test-support.c (test_ibm128): New variable. (init_max_error): Take argument testing_ibm128 and set test_ibm128 instead of using [TEST_COND_ibm128] conditional. (test_exceptions): Use test_ibm128 instead of TEST_COND_ibm128. * math/libm-test-driver.c (STR_ARG_FLOAT): New macro. [TEST_NARROW] (TEST_MSG): New definition. (arg_plus_zero): New macro. (arg_minus_zero): Likewise. (arg_plus_infty): Likewise. (arg_minus_infty): Likewise. (arg_qnan_value_pl): Likewise. (arg_qnan_value): Likewise. (arg_snan_value_pl): Likewise. (arg_snan_value): Likewise. (arg_max_value): Likewise. (arg_min_value): Likewise. (arg_min_subnorm_value): Likewise. [ARG_FLOAT] (struct test_aa_f_data): New struct type. (RUN_TEST_LOOP_aa_f): New macro. (TEST_SUFF): New macro. (TEST_SUFF_STR): Likewise. [!TEST_MATHVEC] (VEC_SUFF): Don't define. (TEST_COND_any_ibm128): New macro. (START): Use TEST_SUFF and TEST_SUFF_STR in initializer for this_func. Update call to init_max_error. * math/test-double.h (FUNC_NARROW_PREFIX): New macro. * math/test-float.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float128.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float32.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float32x.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float64.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float64x.h (FUNC_NARROW_PREFIX): Likewise. * math/test-math-scalar.h (TEST_NARROW): Likewise. * math/test-math-vector.h (TEST_NARROW): Likewise. * math/test-arg-double.h: New file. * math/test-arg-float128.h: Likewise. * math/test-arg-float32x.h: Likewise. * math/test-arg-float64.h: Likewise. * math/test-arg-float64x.h: Likewise. * math/test-arg-ldouble.h: Likewise. * math/test-math-narrow.h: Likewise. * math/test-narrow-macros.c: Likewise. * sysdeps/ieee754/ldbl-opt/test-narrow-macros-ldbl-64.c: Likewise. * sysdeps/ieee754/ldbl-opt/Makefile (tests): Add test-narrow-macros-ldbl-64. (CFLAGS-test-narrow-macros-ldbl-64.c): New variable.
2018-02-09 21:55:48 +00:00
bool narrow, input_test *it, generic_value *inputs)
{
bool long_bits_matters = false;
bool fits_long32 = true;
for (size_t i = 0; i < tf->num_args; i++)
{
generic_value_type gtype = generic_arg_ret_type (tf->arg_types[i]);
assert (inputs[i].type == gtype);
if (gtype == gtype_int)
{
bool fits_64 = int_fits_type (inputs[i].value.i, tf->arg_types[i],
64);
if (!fits_64)
return;
if (tf->arg_types[i] == type_long
&& !int_fits_type (inputs[i].value.i, tf->arg_types[i], 32))
{
long_bits_matters = true;
fits_long32 = false;
}
}
}
generic_value generic_outputs[MAX_NRET];
Move tests of fma from libm-test.inc to auto-libm-test-in. This patch moves tests of fma to auto-libm-test-in, adding the required support to gen-auto-libm-tests. Because fma can have exact zero results depending on the rounding mode, results of fma cannot always be determined from a single value computed in higher precision with a sticky bit. Thus, this patch adds support for recomputing results with the original MPFR/MPC function in the case where an exact zero is involved. (This also affects some results for cpow; when we start testing cpow in all rounding modes, I think it will be most appropriate to make those tests use IGNORE_ZERO_INF_SIGN, since ISO C does not attempt to determine signs of zero results, or special caes in general, for cpow, and I think signs of zero for cpow are beyond the scope of glibc's accuracy goals.) Simply treating the existing test inputs for fma like those for other functions (i.e., as representing the given value rounded up or down to any of the supported floating-point formats) increases the size of auto-libm-test-out by about 16MB (i.e., about half the file is fma test data). While rounded versions of tests are perfectly reasonable test inputs for fma, in this case having them seems excessive, so this patch allows functions to specify in gen-auto-libm-tests that the given test inputs are only to be interpreted exactly, not as corresponding to values rounded up and down. This reduces the size of the generated test data for fma to a more reasonable 2MB. A consequence of this patch is that fma is now tested for correct presence or absence of "inexact" exceptions, where previously this wasn't tested because I didn't want to try to add that test coverage manually to all the existing tests. As far as I know, the existing fma implementations are already correct in this regard. This patch provides the first cases where the gen-auto-libm-tests support for distinguishing before-rounding/after-rounding underflow actually produces separate entries in auto-libm-test-out (for functions without exactly determined results, the affected cases are all considered underflow-optional, so this only affects functions like fma with exactly determined results). I didn't see any signs of problems with this logic in the output. Tested x86_64 and x86. * math/auto-libm-test-in: Add tests of fma. * math/auto-libm-test-out: Regenerated. * math/libm-test.inc (fma_test_data): Use AUTO_TESTS_fff_f. (fma_towardzero_test_data): Likewise. (fma_downward_test_data): Likewise. (fma_upward_test_data): Likewise. * math/gen-auto-libm-tests.c (rounding_mode_desc): Add field mpc_mode. (rounding_modes): Add values for new field. (func_calc_method): Add value mpfr_fff_f. (func_calc_desc): Add mpfr_fff_f union field. (test_function): Add field exact_args. (FUNC): Add macro argument EXACT_ARGS. (FUNC_mpfr_f_f): Update call to FUNC. (FUNC_mpfr_f_f): Likewise. (FUNC_mpfr_ff_f): Likewise. (FUNC_mpfr_if_f): Likewise. (FUNC_mpc_c_f): Likewise. (FUNC_mpc_c_c): Likewise. (test_functions): Add fma. Update calls to FUNC. (handle_input_arg): Add argument exact_args. (add_test): Update call to handle_input_arg. (calc_generic_results): Add argument mode. Handle mpfr_fff_f. (output_for_one_input_case): Update call to calc_generic_results. Recalculate exact zero results in each rounding mode.
2014-02-18 21:48:51 +00:00
calc_generic_results (generic_outputs, inputs, &tf->calc, rm_towardzero);
bool ignore_output_long32[MAX_NRET] = { false };
bool ignore_output_long64[MAX_NRET] = { false };
for (size_t i = 0; i < tf->num_ret; i++)
{
assert (generic_outputs[i].type
== generic_arg_ret_type (tf->ret_types[i]));
switch (generic_outputs[i].type)
{
case gtype_fp:
if (!mpfr_number_p (generic_outputs[i].value.f))
goto out; /* Result is NaN or exact infinity. */
break;
case gtype_int:
ignore_output_long32[i] = !int_fits_type (generic_outputs[i].value.i,
tf->ret_types[i], 32);
ignore_output_long64[i] = !int_fits_type (generic_outputs[i].value.i,
tf->ret_types[i], 64);
if (ignore_output_long32[i] != ignore_output_long64[i])
long_bits_matters = true;
break;
default:
abort ();
}
}
/* Iterate over relevant sizes of long and floating-point formats. */
for (int long_bits = 32; long_bits <= 64; long_bits += 32)
{
if (long_bits == 32 && !fits_long32)
continue;
if (long_bits == 64 && !long_bits_matters)
continue;
const char *long_cond;
if (long_bits_matters)
long_cond = (long_bits == 32 ? ":long32" : ":long64");
else
long_cond = "";
bool *ignore_output = (long_bits == 32
? ignore_output_long32
: ignore_output_long64);
for (fp_format f = fp_first_format; f < fp_num_formats; f++)
{
bool fits = true;
mpfr_t res[rm_num_modes];
unsigned int exc_before[rm_num_modes];
unsigned int exc_after[rm_num_modes];
Add test infrastructure for narrowing libm functions. This patch continues preparations for adding TS 18661-1 narrowing libm functions by adding the required testsuite infrastructure to test such functions through the libm-test infrastructure. That infrastructure is based around testing for a single type, FLOAT. For the narrowing functions, FLOAT, the "main" type for testing, is the function return type; the argument type is ARG_FLOAT. This is consistent with how the code built once for each type, libm-test-support.c, depends on FLOAT for such things as calculating ulps errors in results but can already handle different argument types (pointers, integers, long double for nexttoward). Makefile machinery is added to handle building tests for all pairs of types for which there are narrowing functions (as with non-narrowing functions, aliases are tested just the same as the functions they alias). gen-auto-libm-tests gains a --narrow option for building outputs for narrowing functions (so narrowing sqrt and fma will share the same inputs as non-narrowing, but gen-auto-libm-tests will be run with and without that option to generate different output files). In the narrowing case, the auto-libm-test-out-narrow-* files include annotations for each test about what properties ARG_FLOAT must have to be able to represent all the inputs for that test; those annotations result in calls to the TEST_COND_arg_fmt macro. gen-libm-test.pl has some minor updates to handle narrowing tests (for example, arguments in such tests must be surrounded by ARG_LIT calls instead of LIT calls). Various new macros are added to the C test support code (for example, sNaN initializers need to be properly typed, so arg_snan_value is added; other such arg_* macros are added as it seems cleanest to do so, though some are not strictly required). Special-casing of the ibm128 format to allow for its limitations is adjusted to handle it as the argument format as well as as the result format; thus, the tests of the new functions allow nonzero ulps only in the case where ibm128 is the argument format, as otherwise the functions correspond to fully-defined IEEE operations. The ulps in question appear as e.g. 'Function: "add_ldouble"' in libm-test-ulps (with 1ulp errors then listed for double and float for that function in powerpc); no support is added to generate corresponding faddl / daddl ulps listings in the ulps table in the manual. For the previous patch, I noted the need to avoid spurious macro expansions of identifiers such as "add". A test test-narrow-macros.c is added to verify such macro expansions are successfully avoided, and there is also a -mlong-double-64 version of that test for ldbl-opt. This test is set up to cover the full set of relevant identifiers from the start rather than adding functions one at a time as each function group is added. Tested for x86_64 (this patch in isolation, as well as testing for various configurations in conjunction with the actual addition of "add" functions). * math/Makefile (test-type-pairs): New variable. (test-type-pairs-f64xf128-yes): Likewise. (tests): Add test-narrow-macros. (libm-test-funcs-narrow): New variable. (libm-test-c-narrow): Likewise. (generated): Add $(libm-test-c-narrow). (libm-tests-base-narrow): New variable. (libm-tests-narrow): Likewise. (libm-tests): Add $(libm-tests-narrow). (libm-tests-for-type): Handle $(libm-tests-narrow). (libm-test-c-narrow-obj): New variable. ($(libm-test-c-narrow-obj)): New rule. ($(foreach t,$(libm-tests-narrow),$(objpfx)$(t).c)): Likewise. ($(foreach f,$(libm-test-funcs-narrow),$(objpfx)$(o)-$(f).o)): Use $(o-iterator) to set dependencies and CFLAGS. * math/gen-auto-libm-tests.c: Document use for narrowing functions. (output_for_one_input_case): Take argument NARROW. (generate_output): Likewise. Update call to output_for_one_input_case. (main): Take --narrow option. Update call to generate_output. * math/gen-libm-test.pl (_apply_lit): Take macro name as argument. (apply_lit): Update call to _apply_lit. (apply_arglit): New function. (parse_args): Handle "a" arguments. (parse_auto_input): Handle format names using ":". * math/README.libm-test: Document "a" parameter type. * math/libm-test-support.h (ARG_TYPE_MIN): New macro. (ARG_TYPE_TRUE_MIN): Likewise. (ARG_TYPE_MAX): Likwise. (ARG_MIN_EXP): Likewise. (ARG_MAX_EXP): Likewise. (ARG_MANT_DIG): Likewise. (TEST_COND_arg_ibm128): Likewise. (TEST_COND_ibm128_libgcc): Define conditional on [ARG_FLOAT]. (TEST_COND_arg_fmt): New macro. (init_max_error): Update prototype. * math/libm-test-support.c (test_ibm128): New variable. (init_max_error): Take argument testing_ibm128 and set test_ibm128 instead of using [TEST_COND_ibm128] conditional. (test_exceptions): Use test_ibm128 instead of TEST_COND_ibm128. * math/libm-test-driver.c (STR_ARG_FLOAT): New macro. [TEST_NARROW] (TEST_MSG): New definition. (arg_plus_zero): New macro. (arg_minus_zero): Likewise. (arg_plus_infty): Likewise. (arg_minus_infty): Likewise. (arg_qnan_value_pl): Likewise. (arg_qnan_value): Likewise. (arg_snan_value_pl): Likewise. (arg_snan_value): Likewise. (arg_max_value): Likewise. (arg_min_value): Likewise. (arg_min_subnorm_value): Likewise. [ARG_FLOAT] (struct test_aa_f_data): New struct type. (RUN_TEST_LOOP_aa_f): New macro. (TEST_SUFF): New macro. (TEST_SUFF_STR): Likewise. [!TEST_MATHVEC] (VEC_SUFF): Don't define. (TEST_COND_any_ibm128): New macro. (START): Use TEST_SUFF and TEST_SUFF_STR in initializer for this_func. Update call to init_max_error. * math/test-double.h (FUNC_NARROW_PREFIX): New macro. * math/test-float.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float128.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float32.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float32x.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float64.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float64x.h (FUNC_NARROW_PREFIX): Likewise. * math/test-math-scalar.h (TEST_NARROW): Likewise. * math/test-math-vector.h (TEST_NARROW): Likewise. * math/test-arg-double.h: New file. * math/test-arg-float128.h: Likewise. * math/test-arg-float32x.h: Likewise. * math/test-arg-float64.h: Likewise. * math/test-arg-float64x.h: Likewise. * math/test-arg-ldouble.h: Likewise. * math/test-math-narrow.h: Likewise. * math/test-narrow-macros.c: Likewise. * sysdeps/ieee754/ldbl-opt/test-narrow-macros-ldbl-64.c: Likewise. * sysdeps/ieee754/ldbl-opt/Makefile (tests): Add test-narrow-macros-ldbl-64. (CFLAGS-test-narrow-macros-ldbl-64.c): New variable.
2018-02-09 21:55:48 +00:00
bool have_fp_arg = false;
int max_exp = 0;
int num_ones = 0;
int min_exp = 0;
int max_prec = 0;
for (size_t i = 0; i < tf->num_args; i++)
{
if (inputs[i].type == gtype_fp)
{
Add test infrastructure for narrowing libm functions. This patch continues preparations for adding TS 18661-1 narrowing libm functions by adding the required testsuite infrastructure to test such functions through the libm-test infrastructure. That infrastructure is based around testing for a single type, FLOAT. For the narrowing functions, FLOAT, the "main" type for testing, is the function return type; the argument type is ARG_FLOAT. This is consistent with how the code built once for each type, libm-test-support.c, depends on FLOAT for such things as calculating ulps errors in results but can already handle different argument types (pointers, integers, long double for nexttoward). Makefile machinery is added to handle building tests for all pairs of types for which there are narrowing functions (as with non-narrowing functions, aliases are tested just the same as the functions they alias). gen-auto-libm-tests gains a --narrow option for building outputs for narrowing functions (so narrowing sqrt and fma will share the same inputs as non-narrowing, but gen-auto-libm-tests will be run with and without that option to generate different output files). In the narrowing case, the auto-libm-test-out-narrow-* files include annotations for each test about what properties ARG_FLOAT must have to be able to represent all the inputs for that test; those annotations result in calls to the TEST_COND_arg_fmt macro. gen-libm-test.pl has some minor updates to handle narrowing tests (for example, arguments in such tests must be surrounded by ARG_LIT calls instead of LIT calls). Various new macros are added to the C test support code (for example, sNaN initializers need to be properly typed, so arg_snan_value is added; other such arg_* macros are added as it seems cleanest to do so, though some are not strictly required). Special-casing of the ibm128 format to allow for its limitations is adjusted to handle it as the argument format as well as as the result format; thus, the tests of the new functions allow nonzero ulps only in the case where ibm128 is the argument format, as otherwise the functions correspond to fully-defined IEEE operations. The ulps in question appear as e.g. 'Function: "add_ldouble"' in libm-test-ulps (with 1ulp errors then listed for double and float for that function in powerpc); no support is added to generate corresponding faddl / daddl ulps listings in the ulps table in the manual. For the previous patch, I noted the need to avoid spurious macro expansions of identifiers such as "add". A test test-narrow-macros.c is added to verify such macro expansions are successfully avoided, and there is also a -mlong-double-64 version of that test for ldbl-opt. This test is set up to cover the full set of relevant identifiers from the start rather than adding functions one at a time as each function group is added. Tested for x86_64 (this patch in isolation, as well as testing for various configurations in conjunction with the actual addition of "add" functions). * math/Makefile (test-type-pairs): New variable. (test-type-pairs-f64xf128-yes): Likewise. (tests): Add test-narrow-macros. (libm-test-funcs-narrow): New variable. (libm-test-c-narrow): Likewise. (generated): Add $(libm-test-c-narrow). (libm-tests-base-narrow): New variable. (libm-tests-narrow): Likewise. (libm-tests): Add $(libm-tests-narrow). (libm-tests-for-type): Handle $(libm-tests-narrow). (libm-test-c-narrow-obj): New variable. ($(libm-test-c-narrow-obj)): New rule. ($(foreach t,$(libm-tests-narrow),$(objpfx)$(t).c)): Likewise. ($(foreach f,$(libm-test-funcs-narrow),$(objpfx)$(o)-$(f).o)): Use $(o-iterator) to set dependencies and CFLAGS. * math/gen-auto-libm-tests.c: Document use for narrowing functions. (output_for_one_input_case): Take argument NARROW. (generate_output): Likewise. Update call to output_for_one_input_case. (main): Take --narrow option. Update call to generate_output. * math/gen-libm-test.pl (_apply_lit): Take macro name as argument. (apply_lit): Update call to _apply_lit. (apply_arglit): New function. (parse_args): Handle "a" arguments. (parse_auto_input): Handle format names using ":". * math/README.libm-test: Document "a" parameter type. * math/libm-test-support.h (ARG_TYPE_MIN): New macro. (ARG_TYPE_TRUE_MIN): Likewise. (ARG_TYPE_MAX): Likwise. (ARG_MIN_EXP): Likewise. (ARG_MAX_EXP): Likewise. (ARG_MANT_DIG): Likewise. (TEST_COND_arg_ibm128): Likewise. (TEST_COND_ibm128_libgcc): Define conditional on [ARG_FLOAT]. (TEST_COND_arg_fmt): New macro. (init_max_error): Update prototype. * math/libm-test-support.c (test_ibm128): New variable. (init_max_error): Take argument testing_ibm128 and set test_ibm128 instead of using [TEST_COND_ibm128] conditional. (test_exceptions): Use test_ibm128 instead of TEST_COND_ibm128. * math/libm-test-driver.c (STR_ARG_FLOAT): New macro. [TEST_NARROW] (TEST_MSG): New definition. (arg_plus_zero): New macro. (arg_minus_zero): Likewise. (arg_plus_infty): Likewise. (arg_minus_infty): Likewise. (arg_qnan_value_pl): Likewise. (arg_qnan_value): Likewise. (arg_snan_value_pl): Likewise. (arg_snan_value): Likewise. (arg_max_value): Likewise. (arg_min_value): Likewise. (arg_min_subnorm_value): Likewise. [ARG_FLOAT] (struct test_aa_f_data): New struct type. (RUN_TEST_LOOP_aa_f): New macro. (TEST_SUFF): New macro. (TEST_SUFF_STR): Likewise. [!TEST_MATHVEC] (VEC_SUFF): Don't define. (TEST_COND_any_ibm128): New macro. (START): Use TEST_SUFF and TEST_SUFF_STR in initializer for this_func. Update call to init_max_error. * math/test-double.h (FUNC_NARROW_PREFIX): New macro. * math/test-float.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float128.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float32.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float32x.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float64.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float64x.h (FUNC_NARROW_PREFIX): Likewise. * math/test-math-scalar.h (TEST_NARROW): Likewise. * math/test-math-vector.h (TEST_NARROW): Likewise. * math/test-arg-double.h: New file. * math/test-arg-float128.h: Likewise. * math/test-arg-float32x.h: Likewise. * math/test-arg-float64.h: Likewise. * math/test-arg-float64x.h: Likewise. * math/test-arg-ldouble.h: Likewise. * math/test-math-narrow.h: Likewise. * math/test-narrow-macros.c: Likewise. * sysdeps/ieee754/ldbl-opt/test-narrow-macros-ldbl-64.c: Likewise. * sysdeps/ieee754/ldbl-opt/Makefile (tests): Add test-narrow-macros-ldbl-64. (CFLAGS-test-narrow-macros-ldbl-64.c): New variable.
2018-02-09 21:55:48 +00:00
if (narrow)
{
if (mpfr_zero_p (inputs[i].value.f))
continue;
assert (mpfr_regular_p (inputs[i].value.f));
int this_exp, this_num_ones, this_min_exp, this_prec;
mpz_t tmp;
mpz_init (tmp);
mpfr_exp_t e = mpfr_get_z_2exp (tmp, inputs[i].value.f);
if (mpz_sgn (tmp) < 0)
mpz_neg (tmp, tmp);
size_t bits = mpz_sizeinbase (tmp, 2);
mp_bitcnt_t tz = mpz_scan1 (tmp, 0);
this_min_exp = e + tz;
this_prec = bits - tz;
assert (this_prec > 0);
this_exp = this_min_exp + this_prec - 1;
assert (this_exp
== mpfr_get_exp (inputs[i].value.f) - 1);
this_num_ones = 1;
while ((size_t) this_num_ones < bits
&& mpz_tstbit (tmp, bits - 1 - this_num_ones))
this_num_ones++;
mpz_clear (tmp);
if (have_fp_arg)
{
if (this_exp > max_exp
|| (this_exp == max_exp
&& this_num_ones > num_ones))
{
max_exp = this_exp;
num_ones = this_num_ones;
}
if (this_min_exp < min_exp)
min_exp = this_min_exp;
if (this_prec > max_prec)
max_prec = this_prec;
}
else
{
max_exp = this_exp;
num_ones = this_num_ones;
min_exp = this_min_exp;
max_prec = this_prec;
}
have_fp_arg = true;
}
else
{
round_real (res, exc_before, exc_after,
inputs[i].value.f, f);
if (!mpfr_equal_p (res[rm_tonearest], inputs[i].value.f))
fits = false;
for (rounding_mode m = rm_first_mode;
m < rm_num_modes;
m++)
mpfr_clear (res[m]);
if (!fits)
break;
}
}
}
if (!fits)
continue;
Add test infrastructure for narrowing libm functions. This patch continues preparations for adding TS 18661-1 narrowing libm functions by adding the required testsuite infrastructure to test such functions through the libm-test infrastructure. That infrastructure is based around testing for a single type, FLOAT. For the narrowing functions, FLOAT, the "main" type for testing, is the function return type; the argument type is ARG_FLOAT. This is consistent with how the code built once for each type, libm-test-support.c, depends on FLOAT for such things as calculating ulps errors in results but can already handle different argument types (pointers, integers, long double for nexttoward). Makefile machinery is added to handle building tests for all pairs of types for which there are narrowing functions (as with non-narrowing functions, aliases are tested just the same as the functions they alias). gen-auto-libm-tests gains a --narrow option for building outputs for narrowing functions (so narrowing sqrt and fma will share the same inputs as non-narrowing, but gen-auto-libm-tests will be run with and without that option to generate different output files). In the narrowing case, the auto-libm-test-out-narrow-* files include annotations for each test about what properties ARG_FLOAT must have to be able to represent all the inputs for that test; those annotations result in calls to the TEST_COND_arg_fmt macro. gen-libm-test.pl has some minor updates to handle narrowing tests (for example, arguments in such tests must be surrounded by ARG_LIT calls instead of LIT calls). Various new macros are added to the C test support code (for example, sNaN initializers need to be properly typed, so arg_snan_value is added; other such arg_* macros are added as it seems cleanest to do so, though some are not strictly required). Special-casing of the ibm128 format to allow for its limitations is adjusted to handle it as the argument format as well as as the result format; thus, the tests of the new functions allow nonzero ulps only in the case where ibm128 is the argument format, as otherwise the functions correspond to fully-defined IEEE operations. The ulps in question appear as e.g. 'Function: "add_ldouble"' in libm-test-ulps (with 1ulp errors then listed for double and float for that function in powerpc); no support is added to generate corresponding faddl / daddl ulps listings in the ulps table in the manual. For the previous patch, I noted the need to avoid spurious macro expansions of identifiers such as "add". A test test-narrow-macros.c is added to verify such macro expansions are successfully avoided, and there is also a -mlong-double-64 version of that test for ldbl-opt. This test is set up to cover the full set of relevant identifiers from the start rather than adding functions one at a time as each function group is added. Tested for x86_64 (this patch in isolation, as well as testing for various configurations in conjunction with the actual addition of "add" functions). * math/Makefile (test-type-pairs): New variable. (test-type-pairs-f64xf128-yes): Likewise. (tests): Add test-narrow-macros. (libm-test-funcs-narrow): New variable. (libm-test-c-narrow): Likewise. (generated): Add $(libm-test-c-narrow). (libm-tests-base-narrow): New variable. (libm-tests-narrow): Likewise. (libm-tests): Add $(libm-tests-narrow). (libm-tests-for-type): Handle $(libm-tests-narrow). (libm-test-c-narrow-obj): New variable. ($(libm-test-c-narrow-obj)): New rule. ($(foreach t,$(libm-tests-narrow),$(objpfx)$(t).c)): Likewise. ($(foreach f,$(libm-test-funcs-narrow),$(objpfx)$(o)-$(f).o)): Use $(o-iterator) to set dependencies and CFLAGS. * math/gen-auto-libm-tests.c: Document use for narrowing functions. (output_for_one_input_case): Take argument NARROW. (generate_output): Likewise. Update call to output_for_one_input_case. (main): Take --narrow option. Update call to generate_output. * math/gen-libm-test.pl (_apply_lit): Take macro name as argument. (apply_lit): Update call to _apply_lit. (apply_arglit): New function. (parse_args): Handle "a" arguments. (parse_auto_input): Handle format names using ":". * math/README.libm-test: Document "a" parameter type. * math/libm-test-support.h (ARG_TYPE_MIN): New macro. (ARG_TYPE_TRUE_MIN): Likewise. (ARG_TYPE_MAX): Likwise. (ARG_MIN_EXP): Likewise. (ARG_MAX_EXP): Likewise. (ARG_MANT_DIG): Likewise. (TEST_COND_arg_ibm128): Likewise. (TEST_COND_ibm128_libgcc): Define conditional on [ARG_FLOAT]. (TEST_COND_arg_fmt): New macro. (init_max_error): Update prototype. * math/libm-test-support.c (test_ibm128): New variable. (init_max_error): Take argument testing_ibm128 and set test_ibm128 instead of using [TEST_COND_ibm128] conditional. (test_exceptions): Use test_ibm128 instead of TEST_COND_ibm128. * math/libm-test-driver.c (STR_ARG_FLOAT): New macro. [TEST_NARROW] (TEST_MSG): New definition. (arg_plus_zero): New macro. (arg_minus_zero): Likewise. (arg_plus_infty): Likewise. (arg_minus_infty): Likewise. (arg_qnan_value_pl): Likewise. (arg_qnan_value): Likewise. (arg_snan_value_pl): Likewise. (arg_snan_value): Likewise. (arg_max_value): Likewise. (arg_min_value): Likewise. (arg_min_subnorm_value): Likewise. [ARG_FLOAT] (struct test_aa_f_data): New struct type. (RUN_TEST_LOOP_aa_f): New macro. (TEST_SUFF): New macro. (TEST_SUFF_STR): Likewise. [!TEST_MATHVEC] (VEC_SUFF): Don't define. (TEST_COND_any_ibm128): New macro. (START): Use TEST_SUFF and TEST_SUFF_STR in initializer for this_func. Update call to init_max_error. * math/test-double.h (FUNC_NARROW_PREFIX): New macro. * math/test-float.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float128.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float32.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float32x.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float64.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float64x.h (FUNC_NARROW_PREFIX): Likewise. * math/test-math-scalar.h (TEST_NARROW): Likewise. * math/test-math-vector.h (TEST_NARROW): Likewise. * math/test-arg-double.h: New file. * math/test-arg-float128.h: Likewise. * math/test-arg-float32x.h: Likewise. * math/test-arg-float64.h: Likewise. * math/test-arg-float64x.h: Likewise. * math/test-arg-ldouble.h: Likewise. * math/test-math-narrow.h: Likewise. * math/test-narrow-macros.c: Likewise. * sysdeps/ieee754/ldbl-opt/test-narrow-macros-ldbl-64.c: Likewise. * sysdeps/ieee754/ldbl-opt/Makefile (tests): Add test-narrow-macros-ldbl-64. (CFLAGS-test-narrow-macros-ldbl-64.c): New variable.
2018-02-09 21:55:48 +00:00
/* The inputs fit this type if required to do so, so compute
the ideal outputs and exceptions. */
mpfr_t all_res[MAX_NRET][rm_num_modes];
unsigned int all_exc_before[MAX_NRET][rm_num_modes];
unsigned int all_exc_after[MAX_NRET][rm_num_modes];
unsigned int merged_exc_before[rm_num_modes] = { 0 };
unsigned int merged_exc_after[rm_num_modes] = { 0 };
/* For functions not exactly determined, track whether
underflow is required (some result is inexact, and
magnitude does not exceed the greatest magnitude
subnormal), and permitted (not an exact zero, and
magnitude does not exceed the least magnitude
normal). */
bool must_underflow = false;
bool may_underflow = false;
for (size_t i = 0; i < tf->num_ret; i++)
{
switch (generic_outputs[i].type)
{
case gtype_fp:
round_real (all_res[i], all_exc_before[i], all_exc_after[i],
generic_outputs[i].value.f, f);
for (rounding_mode m = rm_first_mode; m < rm_num_modes; m++)
{
merged_exc_before[m] |= all_exc_before[i][m];
merged_exc_after[m] |= all_exc_after[i][m];
if (!tf->exact)
{
must_underflow
|= ((all_exc_before[i][m]
& (1U << exc_inexact)) != 0
&& (mpfr_cmpabs (generic_outputs[i].value.f,
fp_formats[f].subnorm_max)
<= 0));
may_underflow
|= (!mpfr_zero_p (generic_outputs[i].value.f)
Relax gen-auto-libm-tests may-underflow rules, test log1p in all rounding modes. gen-auto-libm-tests presently allows but does not require underflow exceptions for results with magnitude in the range (greatest subnormal, least normal]. In some cases, the magnitude of the exact result is very slightly above the least normal, but rounding in the implementation results in it effectively computing an infinite-precision result that is slightly below the least normal, so raising an underflow exception. This is in accordance with the documented accuracy goals, but results in testsuite failures. This patch changes the logic to allow underflows when the mathematical result is up to 0.5ulp above the least normal (so in any case where the round-to-nearest result is the least normal). Ideally underflows in all these cases would be accepted only when an underflow with the actual result is consistent with the rounding mode (in FE_TOWARDZERO mode, a return value of the least normal implies that the infinite-precision result did not underflow so there should be no underflow exception, for example), so as to match the documented goals more precisely - whereas at present the tests for exceptions are completely independent of the tests of the returned values. (The same applies to overflow exceptions as well - they too should be checked for consistency with the result, as in FE_TOWARDZERO mode a result 1ulp below the largest finite value should be inconsistent with an overflow exception and cause a failure with overflow rather than simply being considered a 1ulp error when overflow is expected.) But the present patch at least deals with the cases causing spurious failures so that (a) certain existing tests no longer need to be marked as having spurious exceptions (such markings in auto-libm-test-in end up applying to more cases than just those they are needed for) and (b) log1p can be tested in all rounding modes without introducing more such failures. This patch duly moves tests of log1p to ALL_RM_TEST. Tested x86_64 and x86 and ulps updated accordingly. [BZ #16357] [BZ #16599] * math/gen-auto-libm-tests.c (fp_format_desc): Add field min_plus_half. (fp_formats): Update initializers. (init_fp_formats): Initialize new field. (output_for_one_input_case): Allow underflow for results up to min_plus_half. * math/libm-test.inc (log1p_test): Use ALL_RM_TEST. * math/auto-libm-test-in: Don't mark some underflows from asin and atanh as spurious. * math/auto-libm-test-out: Regenerated. * sysdeps/i386/fpu/libm-test-ulps: Update. * sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
2014-03-25 12:26:06 +00:00
&& (mpfr_cmpabs (generic_outputs[i].value.f,
fp_formats[f].min_plus_half)
<= 0));
}
Move tests of fma from libm-test.inc to auto-libm-test-in. This patch moves tests of fma to auto-libm-test-in, adding the required support to gen-auto-libm-tests. Because fma can have exact zero results depending on the rounding mode, results of fma cannot always be determined from a single value computed in higher precision with a sticky bit. Thus, this patch adds support for recomputing results with the original MPFR/MPC function in the case where an exact zero is involved. (This also affects some results for cpow; when we start testing cpow in all rounding modes, I think it will be most appropriate to make those tests use IGNORE_ZERO_INF_SIGN, since ISO C does not attempt to determine signs of zero results, or special caes in general, for cpow, and I think signs of zero for cpow are beyond the scope of glibc's accuracy goals.) Simply treating the existing test inputs for fma like those for other functions (i.e., as representing the given value rounded up or down to any of the supported floating-point formats) increases the size of auto-libm-test-out by about 16MB (i.e., about half the file is fma test data). While rounded versions of tests are perfectly reasonable test inputs for fma, in this case having them seems excessive, so this patch allows functions to specify in gen-auto-libm-tests that the given test inputs are only to be interpreted exactly, not as corresponding to values rounded up and down. This reduces the size of the generated test data for fma to a more reasonable 2MB. A consequence of this patch is that fma is now tested for correct presence or absence of "inexact" exceptions, where previously this wasn't tested because I didn't want to try to add that test coverage manually to all the existing tests. As far as I know, the existing fma implementations are already correct in this regard. This patch provides the first cases where the gen-auto-libm-tests support for distinguishing before-rounding/after-rounding underflow actually produces separate entries in auto-libm-test-out (for functions without exactly determined results, the affected cases are all considered underflow-optional, so this only affects functions like fma with exactly determined results). I didn't see any signs of problems with this logic in the output. Tested x86_64 and x86. * math/auto-libm-test-in: Add tests of fma. * math/auto-libm-test-out: Regenerated. * math/libm-test.inc (fma_test_data): Use AUTO_TESTS_fff_f. (fma_towardzero_test_data): Likewise. (fma_downward_test_data): Likewise. (fma_upward_test_data): Likewise. * math/gen-auto-libm-tests.c (rounding_mode_desc): Add field mpc_mode. (rounding_modes): Add values for new field. (func_calc_method): Add value mpfr_fff_f. (func_calc_desc): Add mpfr_fff_f union field. (test_function): Add field exact_args. (FUNC): Add macro argument EXACT_ARGS. (FUNC_mpfr_f_f): Update call to FUNC. (FUNC_mpfr_f_f): Likewise. (FUNC_mpfr_ff_f): Likewise. (FUNC_mpfr_if_f): Likewise. (FUNC_mpc_c_f): Likewise. (FUNC_mpc_c_c): Likewise. (test_functions): Add fma. Update calls to FUNC. (handle_input_arg): Add argument exact_args. (add_test): Update call to handle_input_arg. (calc_generic_results): Add argument mode. Handle mpfr_fff_f. (output_for_one_input_case): Update call to calc_generic_results. Recalculate exact zero results in each rounding mode.
2014-02-18 21:48:51 +00:00
/* If the result is an exact zero, the sign may
depend on the rounding mode, so recompute it
directly in that mode. */
if (mpfr_zero_p (all_res[i][m])
&& (all_exc_before[i][m] & (1U << exc_inexact)) == 0)
{
generic_value outputs_rm[MAX_NRET];
calc_generic_results (outputs_rm, inputs,
&tf->calc, m);
assert_exact (mpfr_set (all_res[i][m],
outputs_rm[i].value.f,
MPFR_RNDN));
for (size_t j = 0; j < tf->num_ret; j++)
generic_value_free (&outputs_rm[j]);
}
}
break;
case gtype_int:
if (ignore_output[i])
for (rounding_mode m = rm_first_mode;
m < rm_num_modes;
m++)
{
merged_exc_before[m] |= 1U << exc_invalid;
merged_exc_after[m] |= 1U << exc_invalid;
}
break;
default:
abort ();
}
}
assert (may_underflow || !must_underflow);
for (rounding_mode m = rm_first_mode; m < rm_num_modes; m++)
{
bool before_after_matters
= tf->exact && merged_exc_before[m] != merged_exc_after[m];
Adjust how gen-auto-libm-tests handles before-rounding/after-rounding cases. This patch changes gen-auto-libm-tests so that, when generating test results that depend on whether the architecture has before-rounding or after-rounding tininess detection, the :before-rounding or :after-rounding conditions go on the exception / errno flags generated, rather than generating two separate lines in auto-libm-test-out for e.g. flt-32:before-rounding and flt-32:after-rounding. The rationale for this is as follows. It would be desirable for testing a libm function in all rounding modes to require just one function and array in libm-test.inc, not four (or five), with the array of test data including expected results for all rounding modes rather than separate arrays for each rounding mode that also need to repeat all the test inputs. For gen-libm-test.pl to generate data for such an array from auto-libm-test-out, it would be helpful if each (format, test input) pair has exactly four lines in auto-libm-test-out, one for each rounding mode, rather than some rounding modes having just one line and some having two because the exceptions depend on tininess detection. Tested x86_64 and x86. * math/gen-auto-libm-tests.c: Update comment on output format. (output_for_one_input_case): Generate before-rounding and after-rounding information as conditions on output flags not floating-point format. * math/auto-libm-test-out: Regenerated. * math/gen-libm-test.pl (cond_value): New function. (or_cond_value): Use cond_value. (generate_testfile): Handle conditional exceptions.
2014-03-06 14:11:19 +00:00
if (before_after_matters)
{
Adjust how gen-auto-libm-tests handles before-rounding/after-rounding cases. This patch changes gen-auto-libm-tests so that, when generating test results that depend on whether the architecture has before-rounding or after-rounding tininess detection, the :before-rounding or :after-rounding conditions go on the exception / errno flags generated, rather than generating two separate lines in auto-libm-test-out for e.g. flt-32:before-rounding and flt-32:after-rounding. The rationale for this is as follows. It would be desirable for testing a libm function in all rounding modes to require just one function and array in libm-test.inc, not four (or five), with the array of test data including expected results for all rounding modes rather than separate arrays for each rounding mode that also need to repeat all the test inputs. For gen-libm-test.pl to generate data for such an array from auto-libm-test-out, it would be helpful if each (format, test input) pair has exactly four lines in auto-libm-test-out, one for each rounding mode, rather than some rounding modes having just one line and some having two because the exceptions depend on tininess detection. Tested x86_64 and x86. * math/gen-auto-libm-tests.c: Update comment on output format. (output_for_one_input_case): Generate before-rounding and after-rounding information as conditions on output flags not floating-point format. * math/auto-libm-test-out: Regenerated. * math/gen-libm-test.pl (cond_value): New function. (or_cond_value): Use cond_value. (generate_testfile): Handle conditional exceptions.
2014-03-06 14:11:19 +00:00
assert ((merged_exc_before[m] ^ merged_exc_after[m])
== (1U << exc_underflow));
assert ((merged_exc_before[m] & (1U << exc_underflow)) != 0);
}
unsigned int merged_exc = merged_exc_before[m];
Add test infrastructure for narrowing libm functions. This patch continues preparations for adding TS 18661-1 narrowing libm functions by adding the required testsuite infrastructure to test such functions through the libm-test infrastructure. That infrastructure is based around testing for a single type, FLOAT. For the narrowing functions, FLOAT, the "main" type for testing, is the function return type; the argument type is ARG_FLOAT. This is consistent with how the code built once for each type, libm-test-support.c, depends on FLOAT for such things as calculating ulps errors in results but can already handle different argument types (pointers, integers, long double for nexttoward). Makefile machinery is added to handle building tests for all pairs of types for which there are narrowing functions (as with non-narrowing functions, aliases are tested just the same as the functions they alias). gen-auto-libm-tests gains a --narrow option for building outputs for narrowing functions (so narrowing sqrt and fma will share the same inputs as non-narrowing, but gen-auto-libm-tests will be run with and without that option to generate different output files). In the narrowing case, the auto-libm-test-out-narrow-* files include annotations for each test about what properties ARG_FLOAT must have to be able to represent all the inputs for that test; those annotations result in calls to the TEST_COND_arg_fmt macro. gen-libm-test.pl has some minor updates to handle narrowing tests (for example, arguments in such tests must be surrounded by ARG_LIT calls instead of LIT calls). Various new macros are added to the C test support code (for example, sNaN initializers need to be properly typed, so arg_snan_value is added; other such arg_* macros are added as it seems cleanest to do so, though some are not strictly required). Special-casing of the ibm128 format to allow for its limitations is adjusted to handle it as the argument format as well as as the result format; thus, the tests of the new functions allow nonzero ulps only in the case where ibm128 is the argument format, as otherwise the functions correspond to fully-defined IEEE operations. The ulps in question appear as e.g. 'Function: "add_ldouble"' in libm-test-ulps (with 1ulp errors then listed for double and float for that function in powerpc); no support is added to generate corresponding faddl / daddl ulps listings in the ulps table in the manual. For the previous patch, I noted the need to avoid spurious macro expansions of identifiers such as "add". A test test-narrow-macros.c is added to verify such macro expansions are successfully avoided, and there is also a -mlong-double-64 version of that test for ldbl-opt. This test is set up to cover the full set of relevant identifiers from the start rather than adding functions one at a time as each function group is added. Tested for x86_64 (this patch in isolation, as well as testing for various configurations in conjunction with the actual addition of "add" functions). * math/Makefile (test-type-pairs): New variable. (test-type-pairs-f64xf128-yes): Likewise. (tests): Add test-narrow-macros. (libm-test-funcs-narrow): New variable. (libm-test-c-narrow): Likewise. (generated): Add $(libm-test-c-narrow). (libm-tests-base-narrow): New variable. (libm-tests-narrow): Likewise. (libm-tests): Add $(libm-tests-narrow). (libm-tests-for-type): Handle $(libm-tests-narrow). (libm-test-c-narrow-obj): New variable. ($(libm-test-c-narrow-obj)): New rule. ($(foreach t,$(libm-tests-narrow),$(objpfx)$(t).c)): Likewise. ($(foreach f,$(libm-test-funcs-narrow),$(objpfx)$(o)-$(f).o)): Use $(o-iterator) to set dependencies and CFLAGS. * math/gen-auto-libm-tests.c: Document use for narrowing functions. (output_for_one_input_case): Take argument NARROW. (generate_output): Likewise. Update call to output_for_one_input_case. (main): Take --narrow option. Update call to generate_output. * math/gen-libm-test.pl (_apply_lit): Take macro name as argument. (apply_lit): Update call to _apply_lit. (apply_arglit): New function. (parse_args): Handle "a" arguments. (parse_auto_input): Handle format names using ":". * math/README.libm-test: Document "a" parameter type. * math/libm-test-support.h (ARG_TYPE_MIN): New macro. (ARG_TYPE_TRUE_MIN): Likewise. (ARG_TYPE_MAX): Likwise. (ARG_MIN_EXP): Likewise. (ARG_MAX_EXP): Likewise. (ARG_MANT_DIG): Likewise. (TEST_COND_arg_ibm128): Likewise. (TEST_COND_ibm128_libgcc): Define conditional on [ARG_FLOAT]. (TEST_COND_arg_fmt): New macro. (init_max_error): Update prototype. * math/libm-test-support.c (test_ibm128): New variable. (init_max_error): Take argument testing_ibm128 and set test_ibm128 instead of using [TEST_COND_ibm128] conditional. (test_exceptions): Use test_ibm128 instead of TEST_COND_ibm128. * math/libm-test-driver.c (STR_ARG_FLOAT): New macro. [TEST_NARROW] (TEST_MSG): New definition. (arg_plus_zero): New macro. (arg_minus_zero): Likewise. (arg_plus_infty): Likewise. (arg_minus_infty): Likewise. (arg_qnan_value_pl): Likewise. (arg_qnan_value): Likewise. (arg_snan_value_pl): Likewise. (arg_snan_value): Likewise. (arg_max_value): Likewise. (arg_min_value): Likewise. (arg_min_subnorm_value): Likewise. [ARG_FLOAT] (struct test_aa_f_data): New struct type. (RUN_TEST_LOOP_aa_f): New macro. (TEST_SUFF): New macro. (TEST_SUFF_STR): Likewise. [!TEST_MATHVEC] (VEC_SUFF): Don't define. (TEST_COND_any_ibm128): New macro. (START): Use TEST_SUFF and TEST_SUFF_STR in initializer for this_func. Update call to init_max_error. * math/test-double.h (FUNC_NARROW_PREFIX): New macro. * math/test-float.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float128.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float32.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float32x.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float64.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float64x.h (FUNC_NARROW_PREFIX): Likewise. * math/test-math-scalar.h (TEST_NARROW): Likewise. * math/test-math-vector.h (TEST_NARROW): Likewise. * math/test-arg-double.h: New file. * math/test-arg-float128.h: Likewise. * math/test-arg-float32x.h: Likewise. * math/test-arg-float64.h: Likewise. * math/test-arg-float64x.h: Likewise. * math/test-arg-ldouble.h: Likewise. * math/test-math-narrow.h: Likewise. * math/test-narrow-macros.c: Likewise. * sysdeps/ieee754/ldbl-opt/test-narrow-macros-ldbl-64.c: Likewise. * sysdeps/ieee754/ldbl-opt/Makefile (tests): Add test-narrow-macros-ldbl-64. (CFLAGS-test-narrow-macros-ldbl-64.c): New variable.
2018-02-09 21:55:48 +00:00
if (narrow)
{
if (fprintf (fp, "= %s %s %s%s:arg_fmt(%d,%d,%d,%d)",
tf->name, rounding_modes[m].name,
fp_formats[f].name, long_cond, max_exp,
num_ones, min_exp, max_prec) < 0)
error (EXIT_FAILURE, errno, "write to '%s'", filename);
}
else
{
if (fprintf (fp, "= %s %s %s%s", tf->name,
rounding_modes[m].name, fp_formats[f].name,
long_cond) < 0)
error (EXIT_FAILURE, errno, "write to '%s'", filename);
}
Adjust how gen-auto-libm-tests handles before-rounding/after-rounding cases. This patch changes gen-auto-libm-tests so that, when generating test results that depend on whether the architecture has before-rounding or after-rounding tininess detection, the :before-rounding or :after-rounding conditions go on the exception / errno flags generated, rather than generating two separate lines in auto-libm-test-out for e.g. flt-32:before-rounding and flt-32:after-rounding. The rationale for this is as follows. It would be desirable for testing a libm function in all rounding modes to require just one function and array in libm-test.inc, not four (or five), with the array of test data including expected results for all rounding modes rather than separate arrays for each rounding mode that also need to repeat all the test inputs. For gen-libm-test.pl to generate data for such an array from auto-libm-test-out, it would be helpful if each (format, test input) pair has exactly four lines in auto-libm-test-out, one for each rounding mode, rather than some rounding modes having just one line and some having two because the exceptions depend on tininess detection. Tested x86_64 and x86. * math/gen-auto-libm-tests.c: Update comment on output format. (output_for_one_input_case): Generate before-rounding and after-rounding information as conditions on output flags not floating-point format. * math/auto-libm-test-out: Regenerated. * math/gen-libm-test.pl (cond_value): New function. (or_cond_value): Use cond_value. (generate_testfile): Handle conditional exceptions.
2014-03-06 14:11:19 +00:00
/* Print inputs. */
for (size_t i = 0; i < tf->num_args; i++)
output_generic_value (fp, filename, &inputs[i], false,
tf->arg_types[i], long_bits);
Adjust how gen-auto-libm-tests handles before-rounding/after-rounding cases. This patch changes gen-auto-libm-tests so that, when generating test results that depend on whether the architecture has before-rounding or after-rounding tininess detection, the :before-rounding or :after-rounding conditions go on the exception / errno flags generated, rather than generating two separate lines in auto-libm-test-out for e.g. flt-32:before-rounding and flt-32:after-rounding. The rationale for this is as follows. It would be desirable for testing a libm function in all rounding modes to require just one function and array in libm-test.inc, not four (or five), with the array of test data including expected results for all rounding modes rather than separate arrays for each rounding mode that also need to repeat all the test inputs. For gen-libm-test.pl to generate data for such an array from auto-libm-test-out, it would be helpful if each (format, test input) pair has exactly four lines in auto-libm-test-out, one for each rounding mode, rather than some rounding modes having just one line and some having two because the exceptions depend on tininess detection. Tested x86_64 and x86. * math/gen-auto-libm-tests.c: Update comment on output format. (output_for_one_input_case): Generate before-rounding and after-rounding information as conditions on output flags not floating-point format. * math/auto-libm-test-out: Regenerated. * math/gen-libm-test.pl (cond_value): New function. (or_cond_value): Use cond_value. (generate_testfile): Handle conditional exceptions.
2014-03-06 14:11:19 +00:00
if (fputs (" :", fp) < 0)
error (EXIT_FAILURE, errno, "write to '%s'", filename);
/* Print outputs. */
bool must_erange = false;
bool some_underflow_zero = false;
Adjust how gen-auto-libm-tests handles before-rounding/after-rounding cases. This patch changes gen-auto-libm-tests so that, when generating test results that depend on whether the architecture has before-rounding or after-rounding tininess detection, the :before-rounding or :after-rounding conditions go on the exception / errno flags generated, rather than generating two separate lines in auto-libm-test-out for e.g. flt-32:before-rounding and flt-32:after-rounding. The rationale for this is as follows. It would be desirable for testing a libm function in all rounding modes to require just one function and array in libm-test.inc, not four (or five), with the array of test data including expected results for all rounding modes rather than separate arrays for each rounding mode that also need to repeat all the test inputs. For gen-libm-test.pl to generate data for such an array from auto-libm-test-out, it would be helpful if each (format, test input) pair has exactly four lines in auto-libm-test-out, one for each rounding mode, rather than some rounding modes having just one line and some having two because the exceptions depend on tininess detection. Tested x86_64 and x86. * math/gen-auto-libm-tests.c: Update comment on output format. (output_for_one_input_case): Generate before-rounding and after-rounding information as conditions on output flags not floating-point format. * math/auto-libm-test-out: Regenerated. * math/gen-libm-test.pl (cond_value): New function. (or_cond_value): Use cond_value. (generate_testfile): Handle conditional exceptions.
2014-03-06 14:11:19 +00:00
for (size_t i = 0; i < tf->num_ret; i++)
{
generic_value g;
g.type = generic_outputs[i].type;
switch (g.type)
{
Adjust how gen-auto-libm-tests handles before-rounding/after-rounding cases. This patch changes gen-auto-libm-tests so that, when generating test results that depend on whether the architecture has before-rounding or after-rounding tininess detection, the :before-rounding or :after-rounding conditions go on the exception / errno flags generated, rather than generating two separate lines in auto-libm-test-out for e.g. flt-32:before-rounding and flt-32:after-rounding. The rationale for this is as follows. It would be desirable for testing a libm function in all rounding modes to require just one function and array in libm-test.inc, not four (or five), with the array of test data including expected results for all rounding modes rather than separate arrays for each rounding mode that also need to repeat all the test inputs. For gen-libm-test.pl to generate data for such an array from auto-libm-test-out, it would be helpful if each (format, test input) pair has exactly four lines in auto-libm-test-out, one for each rounding mode, rather than some rounding modes having just one line and some having two because the exceptions depend on tininess detection. Tested x86_64 and x86. * math/gen-auto-libm-tests.c: Update comment on output format. (output_for_one_input_case): Generate before-rounding and after-rounding information as conditions on output flags not floating-point format. * math/auto-libm-test-out: Regenerated. * math/gen-libm-test.pl (cond_value): New function. (or_cond_value): Use cond_value. (generate_testfile): Handle conditional exceptions.
2014-03-06 14:11:19 +00:00
case gtype_fp:
if (mpfr_inf_p (all_res[i][m])
&& (all_exc_before[i][m]
& (1U << exc_overflow)) != 0)
must_erange = true;
if (mpfr_zero_p (all_res[i][m])
&& (tf->exact
|| mpfr_zero_p (all_res[i][rm_tonearest]))
&& (all_exc_before[i][m]
& (1U << exc_underflow)) != 0)
must_erange = true;
if (mpfr_zero_p (all_res[i][rm_towardzero])
&& (all_exc_before[i][m]
& (1U << exc_underflow)) != 0)
some_underflow_zero = true;
Adjust how gen-auto-libm-tests handles before-rounding/after-rounding cases. This patch changes gen-auto-libm-tests so that, when generating test results that depend on whether the architecture has before-rounding or after-rounding tininess detection, the :before-rounding or :after-rounding conditions go on the exception / errno flags generated, rather than generating two separate lines in auto-libm-test-out for e.g. flt-32:before-rounding and flt-32:after-rounding. The rationale for this is as follows. It would be desirable for testing a libm function in all rounding modes to require just one function and array in libm-test.inc, not four (or five), with the array of test data including expected results for all rounding modes rather than separate arrays for each rounding mode that also need to repeat all the test inputs. For gen-libm-test.pl to generate data for such an array from auto-libm-test-out, it would be helpful if each (format, test input) pair has exactly four lines in auto-libm-test-out, one for each rounding mode, rather than some rounding modes having just one line and some having two because the exceptions depend on tininess detection. Tested x86_64 and x86. * math/gen-auto-libm-tests.c: Update comment on output format. (output_for_one_input_case): Generate before-rounding and after-rounding information as conditions on output flags not floating-point format. * math/auto-libm-test-out: Regenerated. * math/gen-libm-test.pl (cond_value): New function. (or_cond_value): Use cond_value. (generate_testfile): Handle conditional exceptions.
2014-03-06 14:11:19 +00:00
mpfr_init2 (g.value.f, fp_formats[f].mant_dig);
assert_exact (mpfr_set (g.value.f, all_res[i][m],
MPFR_RNDN));
break;
Adjust how gen-auto-libm-tests handles before-rounding/after-rounding cases. This patch changes gen-auto-libm-tests so that, when generating test results that depend on whether the architecture has before-rounding or after-rounding tininess detection, the :before-rounding or :after-rounding conditions go on the exception / errno flags generated, rather than generating two separate lines in auto-libm-test-out for e.g. flt-32:before-rounding and flt-32:after-rounding. The rationale for this is as follows. It would be desirable for testing a libm function in all rounding modes to require just one function and array in libm-test.inc, not four (or five), with the array of test data including expected results for all rounding modes rather than separate arrays for each rounding mode that also need to repeat all the test inputs. For gen-libm-test.pl to generate data for such an array from auto-libm-test-out, it would be helpful if each (format, test input) pair has exactly four lines in auto-libm-test-out, one for each rounding mode, rather than some rounding modes having just one line and some having two because the exceptions depend on tininess detection. Tested x86_64 and x86. * math/gen-auto-libm-tests.c: Update comment on output format. (output_for_one_input_case): Generate before-rounding and after-rounding information as conditions on output flags not floating-point format. * math/auto-libm-test-out: Regenerated. * math/gen-libm-test.pl (cond_value): New function. (or_cond_value): Use cond_value. (generate_testfile): Handle conditional exceptions.
2014-03-06 14:11:19 +00:00
case gtype_int:
mpz_init (g.value.i);
mpz_set (g.value.i, generic_outputs[i].value.i);
break;
Adjust how gen-auto-libm-tests handles before-rounding/after-rounding cases. This patch changes gen-auto-libm-tests so that, when generating test results that depend on whether the architecture has before-rounding or after-rounding tininess detection, the :before-rounding or :after-rounding conditions go on the exception / errno flags generated, rather than generating two separate lines in auto-libm-test-out for e.g. flt-32:before-rounding and flt-32:after-rounding. The rationale for this is as follows. It would be desirable for testing a libm function in all rounding modes to require just one function and array in libm-test.inc, not four (or five), with the array of test data including expected results for all rounding modes rather than separate arrays for each rounding mode that also need to repeat all the test inputs. For gen-libm-test.pl to generate data for such an array from auto-libm-test-out, it would be helpful if each (format, test input) pair has exactly four lines in auto-libm-test-out, one for each rounding mode, rather than some rounding modes having just one line and some having two because the exceptions depend on tininess detection. Tested x86_64 and x86. * math/gen-auto-libm-tests.c: Update comment on output format. (output_for_one_input_case): Generate before-rounding and after-rounding information as conditions on output flags not floating-point format. * math/auto-libm-test-out: Regenerated. * math/gen-libm-test.pl (cond_value): New function. (or_cond_value): Use cond_value. (generate_testfile): Handle conditional exceptions.
2014-03-06 14:11:19 +00:00
default:
abort ();
}
Adjust how gen-auto-libm-tests handles before-rounding/after-rounding cases. This patch changes gen-auto-libm-tests so that, when generating test results that depend on whether the architecture has before-rounding or after-rounding tininess detection, the :before-rounding or :after-rounding conditions go on the exception / errno flags generated, rather than generating two separate lines in auto-libm-test-out for e.g. flt-32:before-rounding and flt-32:after-rounding. The rationale for this is as follows. It would be desirable for testing a libm function in all rounding modes to require just one function and array in libm-test.inc, not four (or five), with the array of test data including expected results for all rounding modes rather than separate arrays for each rounding mode that also need to repeat all the test inputs. For gen-libm-test.pl to generate data for such an array from auto-libm-test-out, it would be helpful if each (format, test input) pair has exactly four lines in auto-libm-test-out, one for each rounding mode, rather than some rounding modes having just one line and some having two because the exceptions depend on tininess detection. Tested x86_64 and x86. * math/gen-auto-libm-tests.c: Update comment on output format. (output_for_one_input_case): Generate before-rounding and after-rounding information as conditions on output flags not floating-point format. * math/auto-libm-test-out: Regenerated. * math/gen-libm-test.pl (cond_value): New function. (or_cond_value): Use cond_value. (generate_testfile): Handle conditional exceptions.
2014-03-06 14:11:19 +00:00
output_generic_value (fp, filename, &g, ignore_output[i],
tf->ret_types[i], long_bits);
Adjust how gen-auto-libm-tests handles before-rounding/after-rounding cases. This patch changes gen-auto-libm-tests so that, when generating test results that depend on whether the architecture has before-rounding or after-rounding tininess detection, the :before-rounding or :after-rounding conditions go on the exception / errno flags generated, rather than generating two separate lines in auto-libm-test-out for e.g. flt-32:before-rounding and flt-32:after-rounding. The rationale for this is as follows. It would be desirable for testing a libm function in all rounding modes to require just one function and array in libm-test.inc, not four (or five), with the array of test data including expected results for all rounding modes rather than separate arrays for each rounding mode that also need to repeat all the test inputs. For gen-libm-test.pl to generate data for such an array from auto-libm-test-out, it would be helpful if each (format, test input) pair has exactly four lines in auto-libm-test-out, one for each rounding mode, rather than some rounding modes having just one line and some having two because the exceptions depend on tininess detection. Tested x86_64 and x86. * math/gen-auto-libm-tests.c: Update comment on output format. (output_for_one_input_case): Generate before-rounding and after-rounding information as conditions on output flags not floating-point format. * math/auto-libm-test-out: Regenerated. * math/gen-libm-test.pl (cond_value): New function. (or_cond_value): Use cond_value. (generate_testfile): Handle conditional exceptions.
2014-03-06 14:11:19 +00:00
generic_value_free (&g);
}
if (fputs (" :", fp) < 0)
error (EXIT_FAILURE, errno, "write to '%s'", filename);
/* Print miscellaneous flags (passed through from
input). */
for (size_t i = 0; i < it->num_flags; i++)
switch (it->flags[i].type)
{
case flag_no_test_inline:
Test cpow in all rounding modes. This patch enables testing of cpow in all rounding modes using ALL_RM_TEST. There were two reasons this was previously deferred: * MPC has complicated rounding-mode-dependent rules for the signs of exact zero real or imaginary parts in the result of mpc_pow. Annex G does not impose any such requirements and I don't think glibc should try to implement any particular logic here. This patch adds support for gen-auto-libm-tests passing the IGNORE_ZERO_INF_SIGN flag to libm-test.inc. * Error accumulations in some tests in non-default rounding modes exceed the maximum error permitted in libm-test.inc. This patch marks the problem tests with xfail-rounding. (It might be possible to reduce the accumulations a bit by using round-to-nearest when cpow calls clog, but I don't think there's much point; the implementation approach for cpow is fundamentally deficient, as discussed in the existing bug for cpow inaccuracy which can reasonably be considered to cover these less-inaccurate cases as well. It's possible that the test "cpow 2 0 10 0" will also need xfail-rounding on some platforms.) Tested x86_64 and x86 and ulps updated accordingly. * math/gen-auto-libm-tests.c: Document use of ignore-zero-inf-sign. (input_flag_type): Add value flag_ignore_zero_inf_sign. (input_flags): Add ignore-zero-inf-sign. (output_for_one_input_case): Handle flag_ignore_zero_inf_sign. * math/gen-libm-test.pl (generate_testfile): Handle ignore-zero-inf-sign. * math/auto-libm-test-in: Mark some cpow tests with ignore-zero-inf-sign and some with xfail-rounding. * math/auto-libm-test-out: Regenerated. * math/libm-test.inc (cpow_test): Use ALL_RM_TEST. * sysdeps/i386/fpu/libm-test-ulps: Update. * sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
2014-06-23 20:15:14 +00:00
case flag_ignore_zero_inf_sign:
Adjust how gen-auto-libm-tests handles before-rounding/after-rounding cases. This patch changes gen-auto-libm-tests so that, when generating test results that depend on whether the architecture has before-rounding or after-rounding tininess detection, the :before-rounding or :after-rounding conditions go on the exception / errno flags generated, rather than generating two separate lines in auto-libm-test-out for e.g. flt-32:before-rounding and flt-32:after-rounding. The rationale for this is as follows. It would be desirable for testing a libm function in all rounding modes to require just one function and array in libm-test.inc, not four (or five), with the array of test data including expected results for all rounding modes rather than separate arrays for each rounding mode that also need to repeat all the test inputs. For gen-libm-test.pl to generate data for such an array from auto-libm-test-out, it would be helpful if each (format, test input) pair has exactly four lines in auto-libm-test-out, one for each rounding mode, rather than some rounding modes having just one line and some having two because the exceptions depend on tininess detection. Tested x86_64 and x86. * math/gen-auto-libm-tests.c: Update comment on output format. (output_for_one_input_case): Generate before-rounding and after-rounding information as conditions on output flags not floating-point format. * math/auto-libm-test-out: Regenerated. * math/gen-libm-test.pl (cond_value): New function. (or_cond_value): Use cond_value. (generate_testfile): Handle conditional exceptions.
2014-03-06 14:11:19 +00:00
case flag_xfail:
if (fprintf (fp, " %s%s",
input_flags[it->flags[i].type],
(it->flags[i].cond
? it->flags[i].cond
: "")) < 0)
error (EXIT_FAILURE, errno, "write to '%s'",
filename);
break;
case flag_xfail_rounding:
if (m != rm_tonearest)
if (fprintf (fp, " xfail%s",
(it->flags[i].cond
? it->flags[i].cond
: "")) < 0)
error (EXIT_FAILURE, errno, "write to '%s'",
filename);
break;
default:
break;
}
/* For the ibm128 format, expect incorrect overflowing
results in rounding modes other than to nearest;
likewise incorrect results where the result may
underflow to 0. */
if (f == fp_ldbl_128ibm
&& m != rm_tonearest
&& (some_underflow_zero
|| (merged_exc_before[m] & (1U << exc_overflow)) != 0))
if (fputs (" xfail:ibm128-libgcc", fp) < 0)
error (EXIT_FAILURE, errno, "write to '%s'", filename);
Adjust how gen-auto-libm-tests handles before-rounding/after-rounding cases. This patch changes gen-auto-libm-tests so that, when generating test results that depend on whether the architecture has before-rounding or after-rounding tininess detection, the :before-rounding or :after-rounding conditions go on the exception / errno flags generated, rather than generating two separate lines in auto-libm-test-out for e.g. flt-32:before-rounding and flt-32:after-rounding. The rationale for this is as follows. It would be desirable for testing a libm function in all rounding modes to require just one function and array in libm-test.inc, not four (or five), with the array of test data including expected results for all rounding modes rather than separate arrays for each rounding mode that also need to repeat all the test inputs. For gen-libm-test.pl to generate data for such an array from auto-libm-test-out, it would be helpful if each (format, test input) pair has exactly four lines in auto-libm-test-out, one for each rounding mode, rather than some rounding modes having just one line and some having two because the exceptions depend on tininess detection. Tested x86_64 and x86. * math/gen-auto-libm-tests.c: Update comment on output format. (output_for_one_input_case): Generate before-rounding and after-rounding information as conditions on output flags not floating-point format. * math/auto-libm-test-out: Regenerated. * math/gen-libm-test.pl (cond_value): New function. (or_cond_value): Use cond_value. (generate_testfile): Handle conditional exceptions.
2014-03-06 14:11:19 +00:00
/* Print exception flags and compute errno
expectations where not already computed. */
bool may_edom = false;
bool must_edom = false;
bool may_erange = must_erange || may_underflow;
for (fp_exception e = exc_first_exception;
e < exc_num_exceptions;
e++)
{
bool expect_e = (merged_exc & (1U << e)) != 0;
bool e_optional = false;
switch (e)
{
case exc_divbyzero:
if (expect_e)
may_erange = must_erange = true;
break;
case exc_inexact:
if (!tf->exact)
e_optional = true;
break;
case exc_invalid:
if (expect_e)
may_edom = must_edom = true;
break;
case exc_overflow:
if (expect_e)
may_erange = true;
break;
case exc_underflow:
if (expect_e)
may_erange = true;
if (must_underflow)
assert (expect_e);
if (may_underflow && !must_underflow)
e_optional = true;
break;
default:
abort ();
}
if (e_optional)
{
assert (!before_after_matters);
if (fprintf (fp, " %s-ok", exceptions[e]) < 0)
error (EXIT_FAILURE, errno, "write to '%s'",
filename);
}
else
{
if (expect_e)
if (fprintf (fp, " %s", exceptions[e]) < 0)
error (EXIT_FAILURE, errno, "write to '%s'",
filename);
Adjust how gen-auto-libm-tests handles before-rounding/after-rounding cases. This patch changes gen-auto-libm-tests so that, when generating test results that depend on whether the architecture has before-rounding or after-rounding tininess detection, the :before-rounding or :after-rounding conditions go on the exception / errno flags generated, rather than generating two separate lines in auto-libm-test-out for e.g. flt-32:before-rounding and flt-32:after-rounding. The rationale for this is as follows. It would be desirable for testing a libm function in all rounding modes to require just one function and array in libm-test.inc, not four (or five), with the array of test data including expected results for all rounding modes rather than separate arrays for each rounding mode that also need to repeat all the test inputs. For gen-libm-test.pl to generate data for such an array from auto-libm-test-out, it would be helpful if each (format, test input) pair has exactly four lines in auto-libm-test-out, one for each rounding mode, rather than some rounding modes having just one line and some having two because the exceptions depend on tininess detection. Tested x86_64 and x86. * math/gen-auto-libm-tests.c: Update comment on output format. (output_for_one_input_case): Generate before-rounding and after-rounding information as conditions on output flags not floating-point format. * math/auto-libm-test-out: Regenerated. * math/gen-libm-test.pl (cond_value): New function. (or_cond_value): Use cond_value. (generate_testfile): Handle conditional exceptions.
2014-03-06 14:11:19 +00:00
if (before_after_matters && e == exc_underflow)
if (fputs (":before-rounding", fp) < 0)
error (EXIT_FAILURE, errno, "write to '%s'",
filename);
for (int after = 0; after <= 1; after++)
{
Adjust how gen-auto-libm-tests handles before-rounding/after-rounding cases. This patch changes gen-auto-libm-tests so that, when generating test results that depend on whether the architecture has before-rounding or after-rounding tininess detection, the :before-rounding or :after-rounding conditions go on the exception / errno flags generated, rather than generating two separate lines in auto-libm-test-out for e.g. flt-32:before-rounding and flt-32:after-rounding. The rationale for this is as follows. It would be desirable for testing a libm function in all rounding modes to require just one function and array in libm-test.inc, not four (or five), with the array of test data including expected results for all rounding modes rather than separate arrays for each rounding mode that also need to repeat all the test inputs. For gen-libm-test.pl to generate data for such an array from auto-libm-test-out, it would be helpful if each (format, test input) pair has exactly four lines in auto-libm-test-out, one for each rounding mode, rather than some rounding modes having just one line and some having two because the exceptions depend on tininess detection. Tested x86_64 and x86. * math/gen-auto-libm-tests.c: Update comment on output format. (output_for_one_input_case): Generate before-rounding and after-rounding information as conditions on output flags not floating-point format. * math/auto-libm-test-out: Regenerated. * math/gen-libm-test.pl (cond_value): New function. (or_cond_value): Use cond_value. (generate_testfile): Handle conditional exceptions.
2014-03-06 14:11:19 +00:00
bool expect_e_here = expect_e;
if (after == 1 && (!before_after_matters
|| e != exc_underflow))
continue;
const char *after_cond;
if (before_after_matters && e == exc_underflow)
{
after_cond = (after
? ":after-rounding"
: ":before-rounding");
expect_e_here = !after;
}
else
after_cond = "";
input_flag_type okflag;
Adjust how gen-auto-libm-tests handles before-rounding/after-rounding cases. This patch changes gen-auto-libm-tests so that, when generating test results that depend on whether the architecture has before-rounding or after-rounding tininess detection, the :before-rounding or :after-rounding conditions go on the exception / errno flags generated, rather than generating two separate lines in auto-libm-test-out for e.g. flt-32:before-rounding and flt-32:after-rounding. The rationale for this is as follows. It would be desirable for testing a libm function in all rounding modes to require just one function and array in libm-test.inc, not four (or five), with the array of test data including expected results for all rounding modes rather than separate arrays for each rounding mode that also need to repeat all the test inputs. For gen-libm-test.pl to generate data for such an array from auto-libm-test-out, it would be helpful if each (format, test input) pair has exactly four lines in auto-libm-test-out, one for each rounding mode, rather than some rounding modes having just one line and some having two because the exceptions depend on tininess detection. Tested x86_64 and x86. * math/gen-auto-libm-tests.c: Update comment on output format. (output_for_one_input_case): Generate before-rounding and after-rounding information as conditions on output flags not floating-point format. * math/auto-libm-test-out: Regenerated. * math/gen-libm-test.pl (cond_value): New function. (or_cond_value): Use cond_value. (generate_testfile): Handle conditional exceptions.
2014-03-06 14:11:19 +00:00
okflag = (expect_e_here
? flag_missing_first
: flag_spurious_first) + e;
for (size_t i = 0; i < it->num_flags; i++)
if (it->flags[i].type == okflag)
Adjust how gen-auto-libm-tests handles before-rounding/after-rounding cases. This patch changes gen-auto-libm-tests so that, when generating test results that depend on whether the architecture has before-rounding or after-rounding tininess detection, the :before-rounding or :after-rounding conditions go on the exception / errno flags generated, rather than generating two separate lines in auto-libm-test-out for e.g. flt-32:before-rounding and flt-32:after-rounding. The rationale for this is as follows. It would be desirable for testing a libm function in all rounding modes to require just one function and array in libm-test.inc, not four (or five), with the array of test data including expected results for all rounding modes rather than separate arrays for each rounding mode that also need to repeat all the test inputs. For gen-libm-test.pl to generate data for such an array from auto-libm-test-out, it would be helpful if each (format, test input) pair has exactly four lines in auto-libm-test-out, one for each rounding mode, rather than some rounding modes having just one line and some having two because the exceptions depend on tininess detection. Tested x86_64 and x86. * math/gen-auto-libm-tests.c: Update comment on output format. (output_for_one_input_case): Generate before-rounding and after-rounding information as conditions on output flags not floating-point format. * math/auto-libm-test-out: Regenerated. * math/gen-libm-test.pl (cond_value): New function. (or_cond_value): Use cond_value. (generate_testfile): Handle conditional exceptions.
2014-03-06 14:11:19 +00:00
if (fprintf (fp, " %s-ok%s%s",
exceptions[e],
(it->flags[i].cond
? it->flags[i].cond
Adjust how gen-auto-libm-tests handles before-rounding/after-rounding cases. This patch changes gen-auto-libm-tests so that, when generating test results that depend on whether the architecture has before-rounding or after-rounding tininess detection, the :before-rounding or :after-rounding conditions go on the exception / errno flags generated, rather than generating two separate lines in auto-libm-test-out for e.g. flt-32:before-rounding and flt-32:after-rounding. The rationale for this is as follows. It would be desirable for testing a libm function in all rounding modes to require just one function and array in libm-test.inc, not four (or five), with the array of test data including expected results for all rounding modes rather than separate arrays for each rounding mode that also need to repeat all the test inputs. For gen-libm-test.pl to generate data for such an array from auto-libm-test-out, it would be helpful if each (format, test input) pair has exactly four lines in auto-libm-test-out, one for each rounding mode, rather than some rounding modes having just one line and some having two because the exceptions depend on tininess detection. Tested x86_64 and x86. * math/gen-auto-libm-tests.c: Update comment on output format. (output_for_one_input_case): Generate before-rounding and after-rounding information as conditions on output flags not floating-point format. * math/auto-libm-test-out: Regenerated. * math/gen-libm-test.pl (cond_value): New function. (or_cond_value): Use cond_value. (generate_testfile): Handle conditional exceptions.
2014-03-06 14:11:19 +00:00
: ""), after_cond) < 0)
error (EXIT_FAILURE, errno, "write to '%s'",
filename);
}
}
Adjust how gen-auto-libm-tests handles before-rounding/after-rounding cases. This patch changes gen-auto-libm-tests so that, when generating test results that depend on whether the architecture has before-rounding or after-rounding tininess detection, the :before-rounding or :after-rounding conditions go on the exception / errno flags generated, rather than generating two separate lines in auto-libm-test-out for e.g. flt-32:before-rounding and flt-32:after-rounding. The rationale for this is as follows. It would be desirable for testing a libm function in all rounding modes to require just one function and array in libm-test.inc, not four (or five), with the array of test data including expected results for all rounding modes rather than separate arrays for each rounding mode that also need to repeat all the test inputs. For gen-libm-test.pl to generate data for such an array from auto-libm-test-out, it would be helpful if each (format, test input) pair has exactly four lines in auto-libm-test-out, one for each rounding mode, rather than some rounding modes having just one line and some having two because the exceptions depend on tininess detection. Tested x86_64 and x86. * math/gen-auto-libm-tests.c: Update comment on output format. (output_for_one_input_case): Generate before-rounding and after-rounding information as conditions on output flags not floating-point format. * math/auto-libm-test-out: Regenerated. * math/gen-libm-test.pl (cond_value): New function. (or_cond_value): Use cond_value. (generate_testfile): Handle conditional exceptions.
2014-03-06 14:11:19 +00:00
}
/* Print errno expectations. */
if (tf->complex_fn)
{
must_edom = false;
must_erange = false;
}
if (may_edom && !must_edom)
{
if (fputs (" errno-edom-ok", fp) < 0)
error (EXIT_FAILURE, errno, "write to '%s'",
filename);
}
else
{
if (must_edom)
if (fputs (" errno-edom", fp) < 0)
error (EXIT_FAILURE, errno, "write to '%s'",
filename);
input_flag_type okflag = (must_edom
? flag_missing_errno
: flag_spurious_errno);
for (size_t i = 0; i < it->num_flags; i++)
if (it->flags[i].type == okflag)
if (fprintf (fp, " errno-edom-ok%s",
(it->flags[i].cond
? it->flags[i].cond
: "")) < 0)
error (EXIT_FAILURE, errno, "write to '%s'",
filename);
Adjust how gen-auto-libm-tests handles before-rounding/after-rounding cases. This patch changes gen-auto-libm-tests so that, when generating test results that depend on whether the architecture has before-rounding or after-rounding tininess detection, the :before-rounding or :after-rounding conditions go on the exception / errno flags generated, rather than generating two separate lines in auto-libm-test-out for e.g. flt-32:before-rounding and flt-32:after-rounding. The rationale for this is as follows. It would be desirable for testing a libm function in all rounding modes to require just one function and array in libm-test.inc, not four (or five), with the array of test data including expected results for all rounding modes rather than separate arrays for each rounding mode that also need to repeat all the test inputs. For gen-libm-test.pl to generate data for such an array from auto-libm-test-out, it would be helpful if each (format, test input) pair has exactly four lines in auto-libm-test-out, one for each rounding mode, rather than some rounding modes having just one line and some having two because the exceptions depend on tininess detection. Tested x86_64 and x86. * math/gen-auto-libm-tests.c: Update comment on output format. (output_for_one_input_case): Generate before-rounding and after-rounding information as conditions on output flags not floating-point format. * math/auto-libm-test-out: Regenerated. * math/gen-libm-test.pl (cond_value): New function. (or_cond_value): Use cond_value. (generate_testfile): Handle conditional exceptions.
2014-03-06 14:11:19 +00:00
}
if (before_after_matters)
assert (may_erange && !must_erange);
if (may_erange && !must_erange)
{
if (fprintf (fp, " errno-erange-ok%s",
(before_after_matters
? ":before-rounding"
: "")) < 0)
error (EXIT_FAILURE, errno, "write to '%s'",
filename);
}
if (before_after_matters || !(may_erange && !must_erange))
{
if (must_erange)
if (fputs (" errno-erange", fp) < 0)
error (EXIT_FAILURE, errno, "write to '%s'",
filename);
input_flag_type okflag = (must_erange
? flag_missing_errno
: flag_spurious_errno);
for (size_t i = 0; i < it->num_flags; i++)
if (it->flags[i].type == okflag)
if (fprintf (fp, " errno-erange-ok%s%s",
(it->flags[i].cond
? it->flags[i].cond
: ""),
(before_after_matters
? ":after-rounding"
: "")) < 0)
error (EXIT_FAILURE, errno, "write to '%s'",
filename);
}
Adjust how gen-auto-libm-tests handles before-rounding/after-rounding cases. This patch changes gen-auto-libm-tests so that, when generating test results that depend on whether the architecture has before-rounding or after-rounding tininess detection, the :before-rounding or :after-rounding conditions go on the exception / errno flags generated, rather than generating two separate lines in auto-libm-test-out for e.g. flt-32:before-rounding and flt-32:after-rounding. The rationale for this is as follows. It would be desirable for testing a libm function in all rounding modes to require just one function and array in libm-test.inc, not four (or five), with the array of test data including expected results for all rounding modes rather than separate arrays for each rounding mode that also need to repeat all the test inputs. For gen-libm-test.pl to generate data for such an array from auto-libm-test-out, it would be helpful if each (format, test input) pair has exactly four lines in auto-libm-test-out, one for each rounding mode, rather than some rounding modes having just one line and some having two because the exceptions depend on tininess detection. Tested x86_64 and x86. * math/gen-auto-libm-tests.c: Update comment on output format. (output_for_one_input_case): Generate before-rounding and after-rounding information as conditions on output flags not floating-point format. * math/auto-libm-test-out: Regenerated. * math/gen-libm-test.pl (cond_value): New function. (or_cond_value): Use cond_value. (generate_testfile): Handle conditional exceptions.
2014-03-06 14:11:19 +00:00
if (putc ('\n', fp) < 0)
error (EXIT_FAILURE, errno, "write to '%s'", filename);
}
for (size_t i = 0; i < tf->num_ret; i++)
{
if (generic_outputs[i].type == gtype_fp)
for (rounding_mode m = rm_first_mode; m < rm_num_modes; m++)
mpfr_clear (all_res[i][m]);
}
}
}
out:
for (size_t i = 0; i < tf->num_ret; i++)
generic_value_free (&generic_outputs[i]);
}
Add test infrastructure for narrowing libm functions. This patch continues preparations for adding TS 18661-1 narrowing libm functions by adding the required testsuite infrastructure to test such functions through the libm-test infrastructure. That infrastructure is based around testing for a single type, FLOAT. For the narrowing functions, FLOAT, the "main" type for testing, is the function return type; the argument type is ARG_FLOAT. This is consistent with how the code built once for each type, libm-test-support.c, depends on FLOAT for such things as calculating ulps errors in results but can already handle different argument types (pointers, integers, long double for nexttoward). Makefile machinery is added to handle building tests for all pairs of types for which there are narrowing functions (as with non-narrowing functions, aliases are tested just the same as the functions they alias). gen-auto-libm-tests gains a --narrow option for building outputs for narrowing functions (so narrowing sqrt and fma will share the same inputs as non-narrowing, but gen-auto-libm-tests will be run with and without that option to generate different output files). In the narrowing case, the auto-libm-test-out-narrow-* files include annotations for each test about what properties ARG_FLOAT must have to be able to represent all the inputs for that test; those annotations result in calls to the TEST_COND_arg_fmt macro. gen-libm-test.pl has some minor updates to handle narrowing tests (for example, arguments in such tests must be surrounded by ARG_LIT calls instead of LIT calls). Various new macros are added to the C test support code (for example, sNaN initializers need to be properly typed, so arg_snan_value is added; other such arg_* macros are added as it seems cleanest to do so, though some are not strictly required). Special-casing of the ibm128 format to allow for its limitations is adjusted to handle it as the argument format as well as as the result format; thus, the tests of the new functions allow nonzero ulps only in the case where ibm128 is the argument format, as otherwise the functions correspond to fully-defined IEEE operations. The ulps in question appear as e.g. 'Function: "add_ldouble"' in libm-test-ulps (with 1ulp errors then listed for double and float for that function in powerpc); no support is added to generate corresponding faddl / daddl ulps listings in the ulps table in the manual. For the previous patch, I noted the need to avoid spurious macro expansions of identifiers such as "add". A test test-narrow-macros.c is added to verify such macro expansions are successfully avoided, and there is also a -mlong-double-64 version of that test for ldbl-opt. This test is set up to cover the full set of relevant identifiers from the start rather than adding functions one at a time as each function group is added. Tested for x86_64 (this patch in isolation, as well as testing for various configurations in conjunction with the actual addition of "add" functions). * math/Makefile (test-type-pairs): New variable. (test-type-pairs-f64xf128-yes): Likewise. (tests): Add test-narrow-macros. (libm-test-funcs-narrow): New variable. (libm-test-c-narrow): Likewise. (generated): Add $(libm-test-c-narrow). (libm-tests-base-narrow): New variable. (libm-tests-narrow): Likewise. (libm-tests): Add $(libm-tests-narrow). (libm-tests-for-type): Handle $(libm-tests-narrow). (libm-test-c-narrow-obj): New variable. ($(libm-test-c-narrow-obj)): New rule. ($(foreach t,$(libm-tests-narrow),$(objpfx)$(t).c)): Likewise. ($(foreach f,$(libm-test-funcs-narrow),$(objpfx)$(o)-$(f).o)): Use $(o-iterator) to set dependencies and CFLAGS. * math/gen-auto-libm-tests.c: Document use for narrowing functions. (output_for_one_input_case): Take argument NARROW. (generate_output): Likewise. Update call to output_for_one_input_case. (main): Take --narrow option. Update call to generate_output. * math/gen-libm-test.pl (_apply_lit): Take macro name as argument. (apply_lit): Update call to _apply_lit. (apply_arglit): New function. (parse_args): Handle "a" arguments. (parse_auto_input): Handle format names using ":". * math/README.libm-test: Document "a" parameter type. * math/libm-test-support.h (ARG_TYPE_MIN): New macro. (ARG_TYPE_TRUE_MIN): Likewise. (ARG_TYPE_MAX): Likwise. (ARG_MIN_EXP): Likewise. (ARG_MAX_EXP): Likewise. (ARG_MANT_DIG): Likewise. (TEST_COND_arg_ibm128): Likewise. (TEST_COND_ibm128_libgcc): Define conditional on [ARG_FLOAT]. (TEST_COND_arg_fmt): New macro. (init_max_error): Update prototype. * math/libm-test-support.c (test_ibm128): New variable. (init_max_error): Take argument testing_ibm128 and set test_ibm128 instead of using [TEST_COND_ibm128] conditional. (test_exceptions): Use test_ibm128 instead of TEST_COND_ibm128. * math/libm-test-driver.c (STR_ARG_FLOAT): New macro. [TEST_NARROW] (TEST_MSG): New definition. (arg_plus_zero): New macro. (arg_minus_zero): Likewise. (arg_plus_infty): Likewise. (arg_minus_infty): Likewise. (arg_qnan_value_pl): Likewise. (arg_qnan_value): Likewise. (arg_snan_value_pl): Likewise. (arg_snan_value): Likewise. (arg_max_value): Likewise. (arg_min_value): Likewise. (arg_min_subnorm_value): Likewise. [ARG_FLOAT] (struct test_aa_f_data): New struct type. (RUN_TEST_LOOP_aa_f): New macro. (TEST_SUFF): New macro. (TEST_SUFF_STR): Likewise. [!TEST_MATHVEC] (VEC_SUFF): Don't define. (TEST_COND_any_ibm128): New macro. (START): Use TEST_SUFF and TEST_SUFF_STR in initializer for this_func. Update call to init_max_error. * math/test-double.h (FUNC_NARROW_PREFIX): New macro. * math/test-float.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float128.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float32.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float32x.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float64.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float64x.h (FUNC_NARROW_PREFIX): Likewise. * math/test-math-scalar.h (TEST_NARROW): Likewise. * math/test-math-vector.h (TEST_NARROW): Likewise. * math/test-arg-double.h: New file. * math/test-arg-float128.h: Likewise. * math/test-arg-float32x.h: Likewise. * math/test-arg-float64.h: Likewise. * math/test-arg-float64x.h: Likewise. * math/test-arg-ldouble.h: Likewise. * math/test-math-narrow.h: Likewise. * math/test-narrow-macros.c: Likewise. * sysdeps/ieee754/ldbl-opt/test-narrow-macros-ldbl-64.c: Likewise. * sysdeps/ieee754/ldbl-opt/Makefile (tests): Add test-narrow-macros-ldbl-64. (CFLAGS-test-narrow-macros-ldbl-64.c): New variable.
2018-02-09 21:55:48 +00:00
/* Generate test output data for FUNCTION to FILENAME. The function
is interpreted as rounding its results to a narrower type if
NARROW. */
static void
Add test infrastructure for narrowing libm functions. This patch continues preparations for adding TS 18661-1 narrowing libm functions by adding the required testsuite infrastructure to test such functions through the libm-test infrastructure. That infrastructure is based around testing for a single type, FLOAT. For the narrowing functions, FLOAT, the "main" type for testing, is the function return type; the argument type is ARG_FLOAT. This is consistent with how the code built once for each type, libm-test-support.c, depends on FLOAT for such things as calculating ulps errors in results but can already handle different argument types (pointers, integers, long double for nexttoward). Makefile machinery is added to handle building tests for all pairs of types for which there are narrowing functions (as with non-narrowing functions, aliases are tested just the same as the functions they alias). gen-auto-libm-tests gains a --narrow option for building outputs for narrowing functions (so narrowing sqrt and fma will share the same inputs as non-narrowing, but gen-auto-libm-tests will be run with and without that option to generate different output files). In the narrowing case, the auto-libm-test-out-narrow-* files include annotations for each test about what properties ARG_FLOAT must have to be able to represent all the inputs for that test; those annotations result in calls to the TEST_COND_arg_fmt macro. gen-libm-test.pl has some minor updates to handle narrowing tests (for example, arguments in such tests must be surrounded by ARG_LIT calls instead of LIT calls). Various new macros are added to the C test support code (for example, sNaN initializers need to be properly typed, so arg_snan_value is added; other such arg_* macros are added as it seems cleanest to do so, though some are not strictly required). Special-casing of the ibm128 format to allow for its limitations is adjusted to handle it as the argument format as well as as the result format; thus, the tests of the new functions allow nonzero ulps only in the case where ibm128 is the argument format, as otherwise the functions correspond to fully-defined IEEE operations. The ulps in question appear as e.g. 'Function: "add_ldouble"' in libm-test-ulps (with 1ulp errors then listed for double and float for that function in powerpc); no support is added to generate corresponding faddl / daddl ulps listings in the ulps table in the manual. For the previous patch, I noted the need to avoid spurious macro expansions of identifiers such as "add". A test test-narrow-macros.c is added to verify such macro expansions are successfully avoided, and there is also a -mlong-double-64 version of that test for ldbl-opt. This test is set up to cover the full set of relevant identifiers from the start rather than adding functions one at a time as each function group is added. Tested for x86_64 (this patch in isolation, as well as testing for various configurations in conjunction with the actual addition of "add" functions). * math/Makefile (test-type-pairs): New variable. (test-type-pairs-f64xf128-yes): Likewise. (tests): Add test-narrow-macros. (libm-test-funcs-narrow): New variable. (libm-test-c-narrow): Likewise. (generated): Add $(libm-test-c-narrow). (libm-tests-base-narrow): New variable. (libm-tests-narrow): Likewise. (libm-tests): Add $(libm-tests-narrow). (libm-tests-for-type): Handle $(libm-tests-narrow). (libm-test-c-narrow-obj): New variable. ($(libm-test-c-narrow-obj)): New rule. ($(foreach t,$(libm-tests-narrow),$(objpfx)$(t).c)): Likewise. ($(foreach f,$(libm-test-funcs-narrow),$(objpfx)$(o)-$(f).o)): Use $(o-iterator) to set dependencies and CFLAGS. * math/gen-auto-libm-tests.c: Document use for narrowing functions. (output_for_one_input_case): Take argument NARROW. (generate_output): Likewise. Update call to output_for_one_input_case. (main): Take --narrow option. Update call to generate_output. * math/gen-libm-test.pl (_apply_lit): Take macro name as argument. (apply_lit): Update call to _apply_lit. (apply_arglit): New function. (parse_args): Handle "a" arguments. (parse_auto_input): Handle format names using ":". * math/README.libm-test: Document "a" parameter type. * math/libm-test-support.h (ARG_TYPE_MIN): New macro. (ARG_TYPE_TRUE_MIN): Likewise. (ARG_TYPE_MAX): Likwise. (ARG_MIN_EXP): Likewise. (ARG_MAX_EXP): Likewise. (ARG_MANT_DIG): Likewise. (TEST_COND_arg_ibm128): Likewise. (TEST_COND_ibm128_libgcc): Define conditional on [ARG_FLOAT]. (TEST_COND_arg_fmt): New macro. (init_max_error): Update prototype. * math/libm-test-support.c (test_ibm128): New variable. (init_max_error): Take argument testing_ibm128 and set test_ibm128 instead of using [TEST_COND_ibm128] conditional. (test_exceptions): Use test_ibm128 instead of TEST_COND_ibm128. * math/libm-test-driver.c (STR_ARG_FLOAT): New macro. [TEST_NARROW] (TEST_MSG): New definition. (arg_plus_zero): New macro. (arg_minus_zero): Likewise. (arg_plus_infty): Likewise. (arg_minus_infty): Likewise. (arg_qnan_value_pl): Likewise. (arg_qnan_value): Likewise. (arg_snan_value_pl): Likewise. (arg_snan_value): Likewise. (arg_max_value): Likewise. (arg_min_value): Likewise. (arg_min_subnorm_value): Likewise. [ARG_FLOAT] (struct test_aa_f_data): New struct type. (RUN_TEST_LOOP_aa_f): New macro. (TEST_SUFF): New macro. (TEST_SUFF_STR): Likewise. [!TEST_MATHVEC] (VEC_SUFF): Don't define. (TEST_COND_any_ibm128): New macro. (START): Use TEST_SUFF and TEST_SUFF_STR in initializer for this_func. Update call to init_max_error. * math/test-double.h (FUNC_NARROW_PREFIX): New macro. * math/test-float.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float128.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float32.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float32x.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float64.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float64x.h (FUNC_NARROW_PREFIX): Likewise. * math/test-math-scalar.h (TEST_NARROW): Likewise. * math/test-math-vector.h (TEST_NARROW): Likewise. * math/test-arg-double.h: New file. * math/test-arg-float128.h: Likewise. * math/test-arg-float32x.h: Likewise. * math/test-arg-float64.h: Likewise. * math/test-arg-float64x.h: Likewise. * math/test-arg-ldouble.h: Likewise. * math/test-math-narrow.h: Likewise. * math/test-narrow-macros.c: Likewise. * sysdeps/ieee754/ldbl-opt/test-narrow-macros-ldbl-64.c: Likewise. * sysdeps/ieee754/ldbl-opt/Makefile (tests): Add test-narrow-macros-ldbl-64. (CFLAGS-test-narrow-macros-ldbl-64.c): New variable.
2018-02-09 21:55:48 +00:00
generate_output (const char *function, bool narrow, const char *filename)
{
FILE *fp = fopen (filename, "w");
if (fp == NULL)
error (EXIT_FAILURE, errno, "open '%s'", filename);
for (size_t i = 0; i < ARRAY_SIZE (test_functions); i++)
{
test_function *tf = &test_functions[i];
Split auto-libm-test-out by function. math/auto-libm-test-out is, at over 30 MB, by far the largest file in the glibc source tree. This patch splits it by function, so reducing it to auto-libm-test-out-<func> files that are all under 5 MB in size. This is preliminary to splitting up libm-test.inc as well so that each function's tests can also be processed separately by gen-libm-test.pl. As a preliminary patch it doesn't actually implement that step; rather, all the separate files get concatenated by the Makefile to produce the monolithic auto-libm-test-out file again as an input to gen-libm-test.pl. (The concatentation is identical to the file in the source tree before this patch.) Even this preliminary step, however, is of use independent of splitting up libm-test.inc: some tests for csin and csinh have not been moved to auto-libm-test-in because they result in auto-libm-test-out generation taking several minutes rather than a few seconds (all released MPC versions are very slow for certain sin / sinh inputs; there are some old improvements in MPC mainline which should eventually become MPC 1.1, but the complex inverse trig and hyperbolic functions are slow even in MPC mainline and have yet to be moved to auto-libm-test-in at all), and it seems much more reasonable to add such inputs to auto-libm-test-in when it will only slow down regeneration for particular functions than when it will slow down regeneration globally. gen-auto-libm-tests still parses the whole input file, but only generates output for the requested function. This ensures bad syntax in the file is always detected, and parsing the whole file is quick; it's output generation that is comparatively slow for some functions. Tested for x86_64. * math/gen-auto-libm-tests.c: Update comment about use of program. (generate_output): Add argument FUNCTION. (main): Require extra argument. Pass function name to generate_output. * math/Makefile (generated): Add auto-libm-test-out. (libm-test-funcs-auto): New variable. (auto-libm-test-out-files): New variable. ($(objpfx)libm-test.c): Depend on $(auto-libm-test-out-files). Concatenate those files to form $(objpfx)auto-libm-test-out and use it as input to gen-libm-test.pl. * math/README.libm-test: Update. * math/auto-libm-test-out: Remove. * math/auto-libm-test-out-acos: New generated file. * math/auto-libm-test-out-acosh: Likewise. * math/auto-libm-test-out-asin: Likewise. * math/auto-libm-test-out-asinh: Likewise. * math/auto-libm-test-out-atan: Likewise. * math/auto-libm-test-out-atan2: Likewise. * math/auto-libm-test-out-atanh: Likewise. * math/auto-libm-test-out-cabs: Likewise. * math/auto-libm-test-out-carg: Likewise. * math/auto-libm-test-out-cbrt: Likewise. * math/auto-libm-test-out-ccos: Likewise. * math/auto-libm-test-out-ccosh: Likewise. * math/auto-libm-test-out-cexp: Likewise. * math/auto-libm-test-out-clog: Likewise. * math/auto-libm-test-out-clog10: Likewise. * math/auto-libm-test-out-cos: Likewise. * math/auto-libm-test-out-cosh: Likewise. * math/auto-libm-test-out-cpow: Likewise. * math/auto-libm-test-out-csin: Likewise. * math/auto-libm-test-out-csinh: Likewise. * math/auto-libm-test-out-csqrt: Likewise. * math/auto-libm-test-out-ctan: Likewise. * math/auto-libm-test-out-ctanh: Likewise. * math/auto-libm-test-out-erf: Likewise. * math/auto-libm-test-out-erfc: Likewise. * math/auto-libm-test-out-exp: Likewise. * math/auto-libm-test-out-exp10: Likewise. * math/auto-libm-test-out-exp2: Likewise. * math/auto-libm-test-out-expm1: Likewise. * math/auto-libm-test-out-fma: Likewise. * math/auto-libm-test-out-hypot: Likewise. * math/auto-libm-test-out-j0: Likewise. * math/auto-libm-test-out-j1: Likewise. * math/auto-libm-test-out-jn: Likewise. * math/auto-libm-test-out-lgamma: Likewise. * math/auto-libm-test-out-log: Likewise. * math/auto-libm-test-out-log10: Likewise. * math/auto-libm-test-out-log1p: Likewise. * math/auto-libm-test-out-log2: Likewise. * math/auto-libm-test-out-pow: Likewise. * math/auto-libm-test-out-sin: Likewise. * math/auto-libm-test-out-sincos: Likewise. * math/auto-libm-test-out-sinh: Likewise. * math/auto-libm-test-out-sqrt: Likewise. * math/auto-libm-test-out-tan: Likewise. * math/auto-libm-test-out-tanh: Likewise. * math/auto-libm-test-out-tgamma: Likewise. * math/auto-libm-test-out-y0: Likewise. * math/auto-libm-test-out-y1: Likewise. * math/auto-libm-test-out-yn: Likewise.
2017-02-06 18:41:20 +00:00
if (strcmp (tf->name, function) != 0)
continue;
for (size_t j = 0; j < tf->num_tests; j++)
{
input_test *it = &tf->tests[j];
if (fputs (it->line, fp) < 0)
error (EXIT_FAILURE, errno, "write to '%s'", filename);
for (size_t k = 0; k < it->num_input_cases; k++)
Add test infrastructure for narrowing libm functions. This patch continues preparations for adding TS 18661-1 narrowing libm functions by adding the required testsuite infrastructure to test such functions through the libm-test infrastructure. That infrastructure is based around testing for a single type, FLOAT. For the narrowing functions, FLOAT, the "main" type for testing, is the function return type; the argument type is ARG_FLOAT. This is consistent with how the code built once for each type, libm-test-support.c, depends on FLOAT for such things as calculating ulps errors in results but can already handle different argument types (pointers, integers, long double for nexttoward). Makefile machinery is added to handle building tests for all pairs of types for which there are narrowing functions (as with non-narrowing functions, aliases are tested just the same as the functions they alias). gen-auto-libm-tests gains a --narrow option for building outputs for narrowing functions (so narrowing sqrt and fma will share the same inputs as non-narrowing, but gen-auto-libm-tests will be run with and without that option to generate different output files). In the narrowing case, the auto-libm-test-out-narrow-* files include annotations for each test about what properties ARG_FLOAT must have to be able to represent all the inputs for that test; those annotations result in calls to the TEST_COND_arg_fmt macro. gen-libm-test.pl has some minor updates to handle narrowing tests (for example, arguments in such tests must be surrounded by ARG_LIT calls instead of LIT calls). Various new macros are added to the C test support code (for example, sNaN initializers need to be properly typed, so arg_snan_value is added; other such arg_* macros are added as it seems cleanest to do so, though some are not strictly required). Special-casing of the ibm128 format to allow for its limitations is adjusted to handle it as the argument format as well as as the result format; thus, the tests of the new functions allow nonzero ulps only in the case where ibm128 is the argument format, as otherwise the functions correspond to fully-defined IEEE operations. The ulps in question appear as e.g. 'Function: "add_ldouble"' in libm-test-ulps (with 1ulp errors then listed for double and float for that function in powerpc); no support is added to generate corresponding faddl / daddl ulps listings in the ulps table in the manual. For the previous patch, I noted the need to avoid spurious macro expansions of identifiers such as "add". A test test-narrow-macros.c is added to verify such macro expansions are successfully avoided, and there is also a -mlong-double-64 version of that test for ldbl-opt. This test is set up to cover the full set of relevant identifiers from the start rather than adding functions one at a time as each function group is added. Tested for x86_64 (this patch in isolation, as well as testing for various configurations in conjunction with the actual addition of "add" functions). * math/Makefile (test-type-pairs): New variable. (test-type-pairs-f64xf128-yes): Likewise. (tests): Add test-narrow-macros. (libm-test-funcs-narrow): New variable. (libm-test-c-narrow): Likewise. (generated): Add $(libm-test-c-narrow). (libm-tests-base-narrow): New variable. (libm-tests-narrow): Likewise. (libm-tests): Add $(libm-tests-narrow). (libm-tests-for-type): Handle $(libm-tests-narrow). (libm-test-c-narrow-obj): New variable. ($(libm-test-c-narrow-obj)): New rule. ($(foreach t,$(libm-tests-narrow),$(objpfx)$(t).c)): Likewise. ($(foreach f,$(libm-test-funcs-narrow),$(objpfx)$(o)-$(f).o)): Use $(o-iterator) to set dependencies and CFLAGS. * math/gen-auto-libm-tests.c: Document use for narrowing functions. (output_for_one_input_case): Take argument NARROW. (generate_output): Likewise. Update call to output_for_one_input_case. (main): Take --narrow option. Update call to generate_output. * math/gen-libm-test.pl (_apply_lit): Take macro name as argument. (apply_lit): Update call to _apply_lit. (apply_arglit): New function. (parse_args): Handle "a" arguments. (parse_auto_input): Handle format names using ":". * math/README.libm-test: Document "a" parameter type. * math/libm-test-support.h (ARG_TYPE_MIN): New macro. (ARG_TYPE_TRUE_MIN): Likewise. (ARG_TYPE_MAX): Likwise. (ARG_MIN_EXP): Likewise. (ARG_MAX_EXP): Likewise. (ARG_MANT_DIG): Likewise. (TEST_COND_arg_ibm128): Likewise. (TEST_COND_ibm128_libgcc): Define conditional on [ARG_FLOAT]. (TEST_COND_arg_fmt): New macro. (init_max_error): Update prototype. * math/libm-test-support.c (test_ibm128): New variable. (init_max_error): Take argument testing_ibm128 and set test_ibm128 instead of using [TEST_COND_ibm128] conditional. (test_exceptions): Use test_ibm128 instead of TEST_COND_ibm128. * math/libm-test-driver.c (STR_ARG_FLOAT): New macro. [TEST_NARROW] (TEST_MSG): New definition. (arg_plus_zero): New macro. (arg_minus_zero): Likewise. (arg_plus_infty): Likewise. (arg_minus_infty): Likewise. (arg_qnan_value_pl): Likewise. (arg_qnan_value): Likewise. (arg_snan_value_pl): Likewise. (arg_snan_value): Likewise. (arg_max_value): Likewise. (arg_min_value): Likewise. (arg_min_subnorm_value): Likewise. [ARG_FLOAT] (struct test_aa_f_data): New struct type. (RUN_TEST_LOOP_aa_f): New macro. (TEST_SUFF): New macro. (TEST_SUFF_STR): Likewise. [!TEST_MATHVEC] (VEC_SUFF): Don't define. (TEST_COND_any_ibm128): New macro. (START): Use TEST_SUFF and TEST_SUFF_STR in initializer for this_func. Update call to init_max_error. * math/test-double.h (FUNC_NARROW_PREFIX): New macro. * math/test-float.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float128.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float32.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float32x.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float64.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float64x.h (FUNC_NARROW_PREFIX): Likewise. * math/test-math-scalar.h (TEST_NARROW): Likewise. * math/test-math-vector.h (TEST_NARROW): Likewise. * math/test-arg-double.h: New file. * math/test-arg-float128.h: Likewise. * math/test-arg-float32x.h: Likewise. * math/test-arg-float64.h: Likewise. * math/test-arg-float64x.h: Likewise. * math/test-arg-ldouble.h: Likewise. * math/test-math-narrow.h: Likewise. * math/test-narrow-macros.c: Likewise. * sysdeps/ieee754/ldbl-opt/test-narrow-macros-ldbl-64.c: Likewise. * sysdeps/ieee754/ldbl-opt/Makefile (tests): Add test-narrow-macros-ldbl-64. (CFLAGS-test-narrow-macros-ldbl-64.c): New variable.
2018-02-09 21:55:48 +00:00
output_for_one_input_case (fp, filename, tf, narrow,
it, it->inputs[k]);
}
}
if (fclose (fp) != 0)
error (EXIT_FAILURE, errno, "close '%s'", filename);
}
int
main (int argc, char **argv)
{
Add test infrastructure for narrowing libm functions. This patch continues preparations for adding TS 18661-1 narrowing libm functions by adding the required testsuite infrastructure to test such functions through the libm-test infrastructure. That infrastructure is based around testing for a single type, FLOAT. For the narrowing functions, FLOAT, the "main" type for testing, is the function return type; the argument type is ARG_FLOAT. This is consistent with how the code built once for each type, libm-test-support.c, depends on FLOAT for such things as calculating ulps errors in results but can already handle different argument types (pointers, integers, long double for nexttoward). Makefile machinery is added to handle building tests for all pairs of types for which there are narrowing functions (as with non-narrowing functions, aliases are tested just the same as the functions they alias). gen-auto-libm-tests gains a --narrow option for building outputs for narrowing functions (so narrowing sqrt and fma will share the same inputs as non-narrowing, but gen-auto-libm-tests will be run with and without that option to generate different output files). In the narrowing case, the auto-libm-test-out-narrow-* files include annotations for each test about what properties ARG_FLOAT must have to be able to represent all the inputs for that test; those annotations result in calls to the TEST_COND_arg_fmt macro. gen-libm-test.pl has some minor updates to handle narrowing tests (for example, arguments in such tests must be surrounded by ARG_LIT calls instead of LIT calls). Various new macros are added to the C test support code (for example, sNaN initializers need to be properly typed, so arg_snan_value is added; other such arg_* macros are added as it seems cleanest to do so, though some are not strictly required). Special-casing of the ibm128 format to allow for its limitations is adjusted to handle it as the argument format as well as as the result format; thus, the tests of the new functions allow nonzero ulps only in the case where ibm128 is the argument format, as otherwise the functions correspond to fully-defined IEEE operations. The ulps in question appear as e.g. 'Function: "add_ldouble"' in libm-test-ulps (with 1ulp errors then listed for double and float for that function in powerpc); no support is added to generate corresponding faddl / daddl ulps listings in the ulps table in the manual. For the previous patch, I noted the need to avoid spurious macro expansions of identifiers such as "add". A test test-narrow-macros.c is added to verify such macro expansions are successfully avoided, and there is also a -mlong-double-64 version of that test for ldbl-opt. This test is set up to cover the full set of relevant identifiers from the start rather than adding functions one at a time as each function group is added. Tested for x86_64 (this patch in isolation, as well as testing for various configurations in conjunction with the actual addition of "add" functions). * math/Makefile (test-type-pairs): New variable. (test-type-pairs-f64xf128-yes): Likewise. (tests): Add test-narrow-macros. (libm-test-funcs-narrow): New variable. (libm-test-c-narrow): Likewise. (generated): Add $(libm-test-c-narrow). (libm-tests-base-narrow): New variable. (libm-tests-narrow): Likewise. (libm-tests): Add $(libm-tests-narrow). (libm-tests-for-type): Handle $(libm-tests-narrow). (libm-test-c-narrow-obj): New variable. ($(libm-test-c-narrow-obj)): New rule. ($(foreach t,$(libm-tests-narrow),$(objpfx)$(t).c)): Likewise. ($(foreach f,$(libm-test-funcs-narrow),$(objpfx)$(o)-$(f).o)): Use $(o-iterator) to set dependencies and CFLAGS. * math/gen-auto-libm-tests.c: Document use for narrowing functions. (output_for_one_input_case): Take argument NARROW. (generate_output): Likewise. Update call to output_for_one_input_case. (main): Take --narrow option. Update call to generate_output. * math/gen-libm-test.pl (_apply_lit): Take macro name as argument. (apply_lit): Update call to _apply_lit. (apply_arglit): New function. (parse_args): Handle "a" arguments. (parse_auto_input): Handle format names using ":". * math/README.libm-test: Document "a" parameter type. * math/libm-test-support.h (ARG_TYPE_MIN): New macro. (ARG_TYPE_TRUE_MIN): Likewise. (ARG_TYPE_MAX): Likwise. (ARG_MIN_EXP): Likewise. (ARG_MAX_EXP): Likewise. (ARG_MANT_DIG): Likewise. (TEST_COND_arg_ibm128): Likewise. (TEST_COND_ibm128_libgcc): Define conditional on [ARG_FLOAT]. (TEST_COND_arg_fmt): New macro. (init_max_error): Update prototype. * math/libm-test-support.c (test_ibm128): New variable. (init_max_error): Take argument testing_ibm128 and set test_ibm128 instead of using [TEST_COND_ibm128] conditional. (test_exceptions): Use test_ibm128 instead of TEST_COND_ibm128. * math/libm-test-driver.c (STR_ARG_FLOAT): New macro. [TEST_NARROW] (TEST_MSG): New definition. (arg_plus_zero): New macro. (arg_minus_zero): Likewise. (arg_plus_infty): Likewise. (arg_minus_infty): Likewise. (arg_qnan_value_pl): Likewise. (arg_qnan_value): Likewise. (arg_snan_value_pl): Likewise. (arg_snan_value): Likewise. (arg_max_value): Likewise. (arg_min_value): Likewise. (arg_min_subnorm_value): Likewise. [ARG_FLOAT] (struct test_aa_f_data): New struct type. (RUN_TEST_LOOP_aa_f): New macro. (TEST_SUFF): New macro. (TEST_SUFF_STR): Likewise. [!TEST_MATHVEC] (VEC_SUFF): Don't define. (TEST_COND_any_ibm128): New macro. (START): Use TEST_SUFF and TEST_SUFF_STR in initializer for this_func. Update call to init_max_error. * math/test-double.h (FUNC_NARROW_PREFIX): New macro. * math/test-float.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float128.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float32.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float32x.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float64.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float64x.h (FUNC_NARROW_PREFIX): Likewise. * math/test-math-scalar.h (TEST_NARROW): Likewise. * math/test-math-vector.h (TEST_NARROW): Likewise. * math/test-arg-double.h: New file. * math/test-arg-float128.h: Likewise. * math/test-arg-float32x.h: Likewise. * math/test-arg-float64.h: Likewise. * math/test-arg-float64x.h: Likewise. * math/test-arg-ldouble.h: Likewise. * math/test-math-narrow.h: Likewise. * math/test-narrow-macros.c: Likewise. * sysdeps/ieee754/ldbl-opt/test-narrow-macros-ldbl-64.c: Likewise. * sysdeps/ieee754/ldbl-opt/Makefile (tests): Add test-narrow-macros-ldbl-64. (CFLAGS-test-narrow-macros-ldbl-64.c): New variable.
2018-02-09 21:55:48 +00:00
if (argc != 4
&& !(argc == 5 && strcmp (argv[1], "--narrow") == 0))
Split auto-libm-test-out by function. math/auto-libm-test-out is, at over 30 MB, by far the largest file in the glibc source tree. This patch splits it by function, so reducing it to auto-libm-test-out-<func> files that are all under 5 MB in size. This is preliminary to splitting up libm-test.inc as well so that each function's tests can also be processed separately by gen-libm-test.pl. As a preliminary patch it doesn't actually implement that step; rather, all the separate files get concatenated by the Makefile to produce the monolithic auto-libm-test-out file again as an input to gen-libm-test.pl. (The concatentation is identical to the file in the source tree before this patch.) Even this preliminary step, however, is of use independent of splitting up libm-test.inc: some tests for csin and csinh have not been moved to auto-libm-test-in because they result in auto-libm-test-out generation taking several minutes rather than a few seconds (all released MPC versions are very slow for certain sin / sinh inputs; there are some old improvements in MPC mainline which should eventually become MPC 1.1, but the complex inverse trig and hyperbolic functions are slow even in MPC mainline and have yet to be moved to auto-libm-test-in at all), and it seems much more reasonable to add such inputs to auto-libm-test-in when it will only slow down regeneration for particular functions than when it will slow down regeneration globally. gen-auto-libm-tests still parses the whole input file, but only generates output for the requested function. This ensures bad syntax in the file is always detected, and parsing the whole file is quick; it's output generation that is comparatively slow for some functions. Tested for x86_64. * math/gen-auto-libm-tests.c: Update comment about use of program. (generate_output): Add argument FUNCTION. (main): Require extra argument. Pass function name to generate_output. * math/Makefile (generated): Add auto-libm-test-out. (libm-test-funcs-auto): New variable. (auto-libm-test-out-files): New variable. ($(objpfx)libm-test.c): Depend on $(auto-libm-test-out-files). Concatenate those files to form $(objpfx)auto-libm-test-out and use it as input to gen-libm-test.pl. * math/README.libm-test: Update. * math/auto-libm-test-out: Remove. * math/auto-libm-test-out-acos: New generated file. * math/auto-libm-test-out-acosh: Likewise. * math/auto-libm-test-out-asin: Likewise. * math/auto-libm-test-out-asinh: Likewise. * math/auto-libm-test-out-atan: Likewise. * math/auto-libm-test-out-atan2: Likewise. * math/auto-libm-test-out-atanh: Likewise. * math/auto-libm-test-out-cabs: Likewise. * math/auto-libm-test-out-carg: Likewise. * math/auto-libm-test-out-cbrt: Likewise. * math/auto-libm-test-out-ccos: Likewise. * math/auto-libm-test-out-ccosh: Likewise. * math/auto-libm-test-out-cexp: Likewise. * math/auto-libm-test-out-clog: Likewise. * math/auto-libm-test-out-clog10: Likewise. * math/auto-libm-test-out-cos: Likewise. * math/auto-libm-test-out-cosh: Likewise. * math/auto-libm-test-out-cpow: Likewise. * math/auto-libm-test-out-csin: Likewise. * math/auto-libm-test-out-csinh: Likewise. * math/auto-libm-test-out-csqrt: Likewise. * math/auto-libm-test-out-ctan: Likewise. * math/auto-libm-test-out-ctanh: Likewise. * math/auto-libm-test-out-erf: Likewise. * math/auto-libm-test-out-erfc: Likewise. * math/auto-libm-test-out-exp: Likewise. * math/auto-libm-test-out-exp10: Likewise. * math/auto-libm-test-out-exp2: Likewise. * math/auto-libm-test-out-expm1: Likewise. * math/auto-libm-test-out-fma: Likewise. * math/auto-libm-test-out-hypot: Likewise. * math/auto-libm-test-out-j0: Likewise. * math/auto-libm-test-out-j1: Likewise. * math/auto-libm-test-out-jn: Likewise. * math/auto-libm-test-out-lgamma: Likewise. * math/auto-libm-test-out-log: Likewise. * math/auto-libm-test-out-log10: Likewise. * math/auto-libm-test-out-log1p: Likewise. * math/auto-libm-test-out-log2: Likewise. * math/auto-libm-test-out-pow: Likewise. * math/auto-libm-test-out-sin: Likewise. * math/auto-libm-test-out-sincos: Likewise. * math/auto-libm-test-out-sinh: Likewise. * math/auto-libm-test-out-sqrt: Likewise. * math/auto-libm-test-out-tan: Likewise. * math/auto-libm-test-out-tanh: Likewise. * math/auto-libm-test-out-tgamma: Likewise. * math/auto-libm-test-out-y0: Likewise. * math/auto-libm-test-out-y1: Likewise. * math/auto-libm-test-out-yn: Likewise.
2017-02-06 18:41:20 +00:00
error (EXIT_FAILURE, 0,
Add test infrastructure for narrowing libm functions. This patch continues preparations for adding TS 18661-1 narrowing libm functions by adding the required testsuite infrastructure to test such functions through the libm-test infrastructure. That infrastructure is based around testing for a single type, FLOAT. For the narrowing functions, FLOAT, the "main" type for testing, is the function return type; the argument type is ARG_FLOAT. This is consistent with how the code built once for each type, libm-test-support.c, depends on FLOAT for such things as calculating ulps errors in results but can already handle different argument types (pointers, integers, long double for nexttoward). Makefile machinery is added to handle building tests for all pairs of types for which there are narrowing functions (as with non-narrowing functions, aliases are tested just the same as the functions they alias). gen-auto-libm-tests gains a --narrow option for building outputs for narrowing functions (so narrowing sqrt and fma will share the same inputs as non-narrowing, but gen-auto-libm-tests will be run with and without that option to generate different output files). In the narrowing case, the auto-libm-test-out-narrow-* files include annotations for each test about what properties ARG_FLOAT must have to be able to represent all the inputs for that test; those annotations result in calls to the TEST_COND_arg_fmt macro. gen-libm-test.pl has some minor updates to handle narrowing tests (for example, arguments in such tests must be surrounded by ARG_LIT calls instead of LIT calls). Various new macros are added to the C test support code (for example, sNaN initializers need to be properly typed, so arg_snan_value is added; other such arg_* macros are added as it seems cleanest to do so, though some are not strictly required). Special-casing of the ibm128 format to allow for its limitations is adjusted to handle it as the argument format as well as as the result format; thus, the tests of the new functions allow nonzero ulps only in the case where ibm128 is the argument format, as otherwise the functions correspond to fully-defined IEEE operations. The ulps in question appear as e.g. 'Function: "add_ldouble"' in libm-test-ulps (with 1ulp errors then listed for double and float for that function in powerpc); no support is added to generate corresponding faddl / daddl ulps listings in the ulps table in the manual. For the previous patch, I noted the need to avoid spurious macro expansions of identifiers such as "add". A test test-narrow-macros.c is added to verify such macro expansions are successfully avoided, and there is also a -mlong-double-64 version of that test for ldbl-opt. This test is set up to cover the full set of relevant identifiers from the start rather than adding functions one at a time as each function group is added. Tested for x86_64 (this patch in isolation, as well as testing for various configurations in conjunction with the actual addition of "add" functions). * math/Makefile (test-type-pairs): New variable. (test-type-pairs-f64xf128-yes): Likewise. (tests): Add test-narrow-macros. (libm-test-funcs-narrow): New variable. (libm-test-c-narrow): Likewise. (generated): Add $(libm-test-c-narrow). (libm-tests-base-narrow): New variable. (libm-tests-narrow): Likewise. (libm-tests): Add $(libm-tests-narrow). (libm-tests-for-type): Handle $(libm-tests-narrow). (libm-test-c-narrow-obj): New variable. ($(libm-test-c-narrow-obj)): New rule. ($(foreach t,$(libm-tests-narrow),$(objpfx)$(t).c)): Likewise. ($(foreach f,$(libm-test-funcs-narrow),$(objpfx)$(o)-$(f).o)): Use $(o-iterator) to set dependencies and CFLAGS. * math/gen-auto-libm-tests.c: Document use for narrowing functions. (output_for_one_input_case): Take argument NARROW. (generate_output): Likewise. Update call to output_for_one_input_case. (main): Take --narrow option. Update call to generate_output. * math/gen-libm-test.pl (_apply_lit): Take macro name as argument. (apply_lit): Update call to _apply_lit. (apply_arglit): New function. (parse_args): Handle "a" arguments. (parse_auto_input): Handle format names using ":". * math/README.libm-test: Document "a" parameter type. * math/libm-test-support.h (ARG_TYPE_MIN): New macro. (ARG_TYPE_TRUE_MIN): Likewise. (ARG_TYPE_MAX): Likwise. (ARG_MIN_EXP): Likewise. (ARG_MAX_EXP): Likewise. (ARG_MANT_DIG): Likewise. (TEST_COND_arg_ibm128): Likewise. (TEST_COND_ibm128_libgcc): Define conditional on [ARG_FLOAT]. (TEST_COND_arg_fmt): New macro. (init_max_error): Update prototype. * math/libm-test-support.c (test_ibm128): New variable. (init_max_error): Take argument testing_ibm128 and set test_ibm128 instead of using [TEST_COND_ibm128] conditional. (test_exceptions): Use test_ibm128 instead of TEST_COND_ibm128. * math/libm-test-driver.c (STR_ARG_FLOAT): New macro. [TEST_NARROW] (TEST_MSG): New definition. (arg_plus_zero): New macro. (arg_minus_zero): Likewise. (arg_plus_infty): Likewise. (arg_minus_infty): Likewise. (arg_qnan_value_pl): Likewise. (arg_qnan_value): Likewise. (arg_snan_value_pl): Likewise. (arg_snan_value): Likewise. (arg_max_value): Likewise. (arg_min_value): Likewise. (arg_min_subnorm_value): Likewise. [ARG_FLOAT] (struct test_aa_f_data): New struct type. (RUN_TEST_LOOP_aa_f): New macro. (TEST_SUFF): New macro. (TEST_SUFF_STR): Likewise. [!TEST_MATHVEC] (VEC_SUFF): Don't define. (TEST_COND_any_ibm128): New macro. (START): Use TEST_SUFF and TEST_SUFF_STR in initializer for this_func. Update call to init_max_error. * math/test-double.h (FUNC_NARROW_PREFIX): New macro. * math/test-float.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float128.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float32.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float32x.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float64.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float64x.h (FUNC_NARROW_PREFIX): Likewise. * math/test-math-scalar.h (TEST_NARROW): Likewise. * math/test-math-vector.h (TEST_NARROW): Likewise. * math/test-arg-double.h: New file. * math/test-arg-float128.h: Likewise. * math/test-arg-float32x.h: Likewise. * math/test-arg-float64.h: Likewise. * math/test-arg-float64x.h: Likewise. * math/test-arg-ldouble.h: Likewise. * math/test-math-narrow.h: Likewise. * math/test-narrow-macros.c: Likewise. * sysdeps/ieee754/ldbl-opt/test-narrow-macros-ldbl-64.c: Likewise. * sysdeps/ieee754/ldbl-opt/Makefile (tests): Add test-narrow-macros-ldbl-64. (CFLAGS-test-narrow-macros-ldbl-64.c): New variable.
2018-02-09 21:55:48 +00:00
"usage: gen-auto-libm-tests [--narrow] <input> <func> <output>");
bool narrow;
const char *input_filename = argv[1];
Split auto-libm-test-out by function. math/auto-libm-test-out is, at over 30 MB, by far the largest file in the glibc source tree. This patch splits it by function, so reducing it to auto-libm-test-out-<func> files that are all under 5 MB in size. This is preliminary to splitting up libm-test.inc as well so that each function's tests can also be processed separately by gen-libm-test.pl. As a preliminary patch it doesn't actually implement that step; rather, all the separate files get concatenated by the Makefile to produce the monolithic auto-libm-test-out file again as an input to gen-libm-test.pl. (The concatentation is identical to the file in the source tree before this patch.) Even this preliminary step, however, is of use independent of splitting up libm-test.inc: some tests for csin and csinh have not been moved to auto-libm-test-in because they result in auto-libm-test-out generation taking several minutes rather than a few seconds (all released MPC versions are very slow for certain sin / sinh inputs; there are some old improvements in MPC mainline which should eventually become MPC 1.1, but the complex inverse trig and hyperbolic functions are slow even in MPC mainline and have yet to be moved to auto-libm-test-in at all), and it seems much more reasonable to add such inputs to auto-libm-test-in when it will only slow down regeneration for particular functions than when it will slow down regeneration globally. gen-auto-libm-tests still parses the whole input file, but only generates output for the requested function. This ensures bad syntax in the file is always detected, and parsing the whole file is quick; it's output generation that is comparatively slow for some functions. Tested for x86_64. * math/gen-auto-libm-tests.c: Update comment about use of program. (generate_output): Add argument FUNCTION. (main): Require extra argument. Pass function name to generate_output. * math/Makefile (generated): Add auto-libm-test-out. (libm-test-funcs-auto): New variable. (auto-libm-test-out-files): New variable. ($(objpfx)libm-test.c): Depend on $(auto-libm-test-out-files). Concatenate those files to form $(objpfx)auto-libm-test-out and use it as input to gen-libm-test.pl. * math/README.libm-test: Update. * math/auto-libm-test-out: Remove. * math/auto-libm-test-out-acos: New generated file. * math/auto-libm-test-out-acosh: Likewise. * math/auto-libm-test-out-asin: Likewise. * math/auto-libm-test-out-asinh: Likewise. * math/auto-libm-test-out-atan: Likewise. * math/auto-libm-test-out-atan2: Likewise. * math/auto-libm-test-out-atanh: Likewise. * math/auto-libm-test-out-cabs: Likewise. * math/auto-libm-test-out-carg: Likewise. * math/auto-libm-test-out-cbrt: Likewise. * math/auto-libm-test-out-ccos: Likewise. * math/auto-libm-test-out-ccosh: Likewise. * math/auto-libm-test-out-cexp: Likewise. * math/auto-libm-test-out-clog: Likewise. * math/auto-libm-test-out-clog10: Likewise. * math/auto-libm-test-out-cos: Likewise. * math/auto-libm-test-out-cosh: Likewise. * math/auto-libm-test-out-cpow: Likewise. * math/auto-libm-test-out-csin: Likewise. * math/auto-libm-test-out-csinh: Likewise. * math/auto-libm-test-out-csqrt: Likewise. * math/auto-libm-test-out-ctan: Likewise. * math/auto-libm-test-out-ctanh: Likewise. * math/auto-libm-test-out-erf: Likewise. * math/auto-libm-test-out-erfc: Likewise. * math/auto-libm-test-out-exp: Likewise. * math/auto-libm-test-out-exp10: Likewise. * math/auto-libm-test-out-exp2: Likewise. * math/auto-libm-test-out-expm1: Likewise. * math/auto-libm-test-out-fma: Likewise. * math/auto-libm-test-out-hypot: Likewise. * math/auto-libm-test-out-j0: Likewise. * math/auto-libm-test-out-j1: Likewise. * math/auto-libm-test-out-jn: Likewise. * math/auto-libm-test-out-lgamma: Likewise. * math/auto-libm-test-out-log: Likewise. * math/auto-libm-test-out-log10: Likewise. * math/auto-libm-test-out-log1p: Likewise. * math/auto-libm-test-out-log2: Likewise. * math/auto-libm-test-out-pow: Likewise. * math/auto-libm-test-out-sin: Likewise. * math/auto-libm-test-out-sincos: Likewise. * math/auto-libm-test-out-sinh: Likewise. * math/auto-libm-test-out-sqrt: Likewise. * math/auto-libm-test-out-tan: Likewise. * math/auto-libm-test-out-tanh: Likewise. * math/auto-libm-test-out-tgamma: Likewise. * math/auto-libm-test-out-y0: Likewise. * math/auto-libm-test-out-y1: Likewise. * math/auto-libm-test-out-yn: Likewise.
2017-02-06 18:41:20 +00:00
const char *function = argv[2];
const char *output_filename = argv[3];
Add test infrastructure for narrowing libm functions. This patch continues preparations for adding TS 18661-1 narrowing libm functions by adding the required testsuite infrastructure to test such functions through the libm-test infrastructure. That infrastructure is based around testing for a single type, FLOAT. For the narrowing functions, FLOAT, the "main" type for testing, is the function return type; the argument type is ARG_FLOAT. This is consistent with how the code built once for each type, libm-test-support.c, depends on FLOAT for such things as calculating ulps errors in results but can already handle different argument types (pointers, integers, long double for nexttoward). Makefile machinery is added to handle building tests for all pairs of types for which there are narrowing functions (as with non-narrowing functions, aliases are tested just the same as the functions they alias). gen-auto-libm-tests gains a --narrow option for building outputs for narrowing functions (so narrowing sqrt and fma will share the same inputs as non-narrowing, but gen-auto-libm-tests will be run with and without that option to generate different output files). In the narrowing case, the auto-libm-test-out-narrow-* files include annotations for each test about what properties ARG_FLOAT must have to be able to represent all the inputs for that test; those annotations result in calls to the TEST_COND_arg_fmt macro. gen-libm-test.pl has some minor updates to handle narrowing tests (for example, arguments in such tests must be surrounded by ARG_LIT calls instead of LIT calls). Various new macros are added to the C test support code (for example, sNaN initializers need to be properly typed, so arg_snan_value is added; other such arg_* macros are added as it seems cleanest to do so, though some are not strictly required). Special-casing of the ibm128 format to allow for its limitations is adjusted to handle it as the argument format as well as as the result format; thus, the tests of the new functions allow nonzero ulps only in the case where ibm128 is the argument format, as otherwise the functions correspond to fully-defined IEEE operations. The ulps in question appear as e.g. 'Function: "add_ldouble"' in libm-test-ulps (with 1ulp errors then listed for double and float for that function in powerpc); no support is added to generate corresponding faddl / daddl ulps listings in the ulps table in the manual. For the previous patch, I noted the need to avoid spurious macro expansions of identifiers such as "add". A test test-narrow-macros.c is added to verify such macro expansions are successfully avoided, and there is also a -mlong-double-64 version of that test for ldbl-opt. This test is set up to cover the full set of relevant identifiers from the start rather than adding functions one at a time as each function group is added. Tested for x86_64 (this patch in isolation, as well as testing for various configurations in conjunction with the actual addition of "add" functions). * math/Makefile (test-type-pairs): New variable. (test-type-pairs-f64xf128-yes): Likewise. (tests): Add test-narrow-macros. (libm-test-funcs-narrow): New variable. (libm-test-c-narrow): Likewise. (generated): Add $(libm-test-c-narrow). (libm-tests-base-narrow): New variable. (libm-tests-narrow): Likewise. (libm-tests): Add $(libm-tests-narrow). (libm-tests-for-type): Handle $(libm-tests-narrow). (libm-test-c-narrow-obj): New variable. ($(libm-test-c-narrow-obj)): New rule. ($(foreach t,$(libm-tests-narrow),$(objpfx)$(t).c)): Likewise. ($(foreach f,$(libm-test-funcs-narrow),$(objpfx)$(o)-$(f).o)): Use $(o-iterator) to set dependencies and CFLAGS. * math/gen-auto-libm-tests.c: Document use for narrowing functions. (output_for_one_input_case): Take argument NARROW. (generate_output): Likewise. Update call to output_for_one_input_case. (main): Take --narrow option. Update call to generate_output. * math/gen-libm-test.pl (_apply_lit): Take macro name as argument. (apply_lit): Update call to _apply_lit. (apply_arglit): New function. (parse_args): Handle "a" arguments. (parse_auto_input): Handle format names using ":". * math/README.libm-test: Document "a" parameter type. * math/libm-test-support.h (ARG_TYPE_MIN): New macro. (ARG_TYPE_TRUE_MIN): Likewise. (ARG_TYPE_MAX): Likwise. (ARG_MIN_EXP): Likewise. (ARG_MAX_EXP): Likewise. (ARG_MANT_DIG): Likewise. (TEST_COND_arg_ibm128): Likewise. (TEST_COND_ibm128_libgcc): Define conditional on [ARG_FLOAT]. (TEST_COND_arg_fmt): New macro. (init_max_error): Update prototype. * math/libm-test-support.c (test_ibm128): New variable. (init_max_error): Take argument testing_ibm128 and set test_ibm128 instead of using [TEST_COND_ibm128] conditional. (test_exceptions): Use test_ibm128 instead of TEST_COND_ibm128. * math/libm-test-driver.c (STR_ARG_FLOAT): New macro. [TEST_NARROW] (TEST_MSG): New definition. (arg_plus_zero): New macro. (arg_minus_zero): Likewise. (arg_plus_infty): Likewise. (arg_minus_infty): Likewise. (arg_qnan_value_pl): Likewise. (arg_qnan_value): Likewise. (arg_snan_value_pl): Likewise. (arg_snan_value): Likewise. (arg_max_value): Likewise. (arg_min_value): Likewise. (arg_min_subnorm_value): Likewise. [ARG_FLOAT] (struct test_aa_f_data): New struct type. (RUN_TEST_LOOP_aa_f): New macro. (TEST_SUFF): New macro. (TEST_SUFF_STR): Likewise. [!TEST_MATHVEC] (VEC_SUFF): Don't define. (TEST_COND_any_ibm128): New macro. (START): Use TEST_SUFF and TEST_SUFF_STR in initializer for this_func. Update call to init_max_error. * math/test-double.h (FUNC_NARROW_PREFIX): New macro. * math/test-float.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float128.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float32.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float32x.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float64.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float64x.h (FUNC_NARROW_PREFIX): Likewise. * math/test-math-scalar.h (TEST_NARROW): Likewise. * math/test-math-vector.h (TEST_NARROW): Likewise. * math/test-arg-double.h: New file. * math/test-arg-float128.h: Likewise. * math/test-arg-float32x.h: Likewise. * math/test-arg-float64.h: Likewise. * math/test-arg-float64x.h: Likewise. * math/test-arg-ldouble.h: Likewise. * math/test-math-narrow.h: Likewise. * math/test-narrow-macros.c: Likewise. * sysdeps/ieee754/ldbl-opt/test-narrow-macros-ldbl-64.c: Likewise. * sysdeps/ieee754/ldbl-opt/Makefile (tests): Add test-narrow-macros-ldbl-64. (CFLAGS-test-narrow-macros-ldbl-64.c): New variable.
2018-02-09 21:55:48 +00:00
if (argc == 4)
{
narrow = false;
input_filename = argv[1];
function = argv[2];
output_filename = argv[3];
}
else
{
narrow = true;
input_filename = argv[2];
function = argv[3];
output_filename = argv[4];
}
init_fp_formats ();
read_input (input_filename);
Add test infrastructure for narrowing libm functions. This patch continues preparations for adding TS 18661-1 narrowing libm functions by adding the required testsuite infrastructure to test such functions through the libm-test infrastructure. That infrastructure is based around testing for a single type, FLOAT. For the narrowing functions, FLOAT, the "main" type for testing, is the function return type; the argument type is ARG_FLOAT. This is consistent with how the code built once for each type, libm-test-support.c, depends on FLOAT for such things as calculating ulps errors in results but can already handle different argument types (pointers, integers, long double for nexttoward). Makefile machinery is added to handle building tests for all pairs of types for which there are narrowing functions (as with non-narrowing functions, aliases are tested just the same as the functions they alias). gen-auto-libm-tests gains a --narrow option for building outputs for narrowing functions (so narrowing sqrt and fma will share the same inputs as non-narrowing, but gen-auto-libm-tests will be run with and without that option to generate different output files). In the narrowing case, the auto-libm-test-out-narrow-* files include annotations for each test about what properties ARG_FLOAT must have to be able to represent all the inputs for that test; those annotations result in calls to the TEST_COND_arg_fmt macro. gen-libm-test.pl has some minor updates to handle narrowing tests (for example, arguments in such tests must be surrounded by ARG_LIT calls instead of LIT calls). Various new macros are added to the C test support code (for example, sNaN initializers need to be properly typed, so arg_snan_value is added; other such arg_* macros are added as it seems cleanest to do so, though some are not strictly required). Special-casing of the ibm128 format to allow for its limitations is adjusted to handle it as the argument format as well as as the result format; thus, the tests of the new functions allow nonzero ulps only in the case where ibm128 is the argument format, as otherwise the functions correspond to fully-defined IEEE operations. The ulps in question appear as e.g. 'Function: "add_ldouble"' in libm-test-ulps (with 1ulp errors then listed for double and float for that function in powerpc); no support is added to generate corresponding faddl / daddl ulps listings in the ulps table in the manual. For the previous patch, I noted the need to avoid spurious macro expansions of identifiers such as "add". A test test-narrow-macros.c is added to verify such macro expansions are successfully avoided, and there is also a -mlong-double-64 version of that test for ldbl-opt. This test is set up to cover the full set of relevant identifiers from the start rather than adding functions one at a time as each function group is added. Tested for x86_64 (this patch in isolation, as well as testing for various configurations in conjunction with the actual addition of "add" functions). * math/Makefile (test-type-pairs): New variable. (test-type-pairs-f64xf128-yes): Likewise. (tests): Add test-narrow-macros. (libm-test-funcs-narrow): New variable. (libm-test-c-narrow): Likewise. (generated): Add $(libm-test-c-narrow). (libm-tests-base-narrow): New variable. (libm-tests-narrow): Likewise. (libm-tests): Add $(libm-tests-narrow). (libm-tests-for-type): Handle $(libm-tests-narrow). (libm-test-c-narrow-obj): New variable. ($(libm-test-c-narrow-obj)): New rule. ($(foreach t,$(libm-tests-narrow),$(objpfx)$(t).c)): Likewise. ($(foreach f,$(libm-test-funcs-narrow),$(objpfx)$(o)-$(f).o)): Use $(o-iterator) to set dependencies and CFLAGS. * math/gen-auto-libm-tests.c: Document use for narrowing functions. (output_for_one_input_case): Take argument NARROW. (generate_output): Likewise. Update call to output_for_one_input_case. (main): Take --narrow option. Update call to generate_output. * math/gen-libm-test.pl (_apply_lit): Take macro name as argument. (apply_lit): Update call to _apply_lit. (apply_arglit): New function. (parse_args): Handle "a" arguments. (parse_auto_input): Handle format names using ":". * math/README.libm-test: Document "a" parameter type. * math/libm-test-support.h (ARG_TYPE_MIN): New macro. (ARG_TYPE_TRUE_MIN): Likewise. (ARG_TYPE_MAX): Likwise. (ARG_MIN_EXP): Likewise. (ARG_MAX_EXP): Likewise. (ARG_MANT_DIG): Likewise. (TEST_COND_arg_ibm128): Likewise. (TEST_COND_ibm128_libgcc): Define conditional on [ARG_FLOAT]. (TEST_COND_arg_fmt): New macro. (init_max_error): Update prototype. * math/libm-test-support.c (test_ibm128): New variable. (init_max_error): Take argument testing_ibm128 and set test_ibm128 instead of using [TEST_COND_ibm128] conditional. (test_exceptions): Use test_ibm128 instead of TEST_COND_ibm128. * math/libm-test-driver.c (STR_ARG_FLOAT): New macro. [TEST_NARROW] (TEST_MSG): New definition. (arg_plus_zero): New macro. (arg_minus_zero): Likewise. (arg_plus_infty): Likewise. (arg_minus_infty): Likewise. (arg_qnan_value_pl): Likewise. (arg_qnan_value): Likewise. (arg_snan_value_pl): Likewise. (arg_snan_value): Likewise. (arg_max_value): Likewise. (arg_min_value): Likewise. (arg_min_subnorm_value): Likewise. [ARG_FLOAT] (struct test_aa_f_data): New struct type. (RUN_TEST_LOOP_aa_f): New macro. (TEST_SUFF): New macro. (TEST_SUFF_STR): Likewise. [!TEST_MATHVEC] (VEC_SUFF): Don't define. (TEST_COND_any_ibm128): New macro. (START): Use TEST_SUFF and TEST_SUFF_STR in initializer for this_func. Update call to init_max_error. * math/test-double.h (FUNC_NARROW_PREFIX): New macro. * math/test-float.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float128.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float32.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float32x.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float64.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float64x.h (FUNC_NARROW_PREFIX): Likewise. * math/test-math-scalar.h (TEST_NARROW): Likewise. * math/test-math-vector.h (TEST_NARROW): Likewise. * math/test-arg-double.h: New file. * math/test-arg-float128.h: Likewise. * math/test-arg-float32x.h: Likewise. * math/test-arg-float64.h: Likewise. * math/test-arg-float64x.h: Likewise. * math/test-arg-ldouble.h: Likewise. * math/test-math-narrow.h: Likewise. * math/test-narrow-macros.c: Likewise. * sysdeps/ieee754/ldbl-opt/test-narrow-macros-ldbl-64.c: Likewise. * sysdeps/ieee754/ldbl-opt/Makefile (tests): Add test-narrow-macros-ldbl-64. (CFLAGS-test-narrow-macros-ldbl-64.c): New variable.
2018-02-09 21:55:48 +00:00
generate_output (function, narrow, output_filename);
exit (EXIT_SUCCESS);
}