glibc/sysdeps/powerpc/Versions

32 lines
660 B
Plaintext
Raw Normal View History

libm {
GLIBC_2.1 {
# symbols used in macros from sysdeps/powerpc/bits/fenv.h
__fe_dfl_env; __fe_enabled_env; __fe_nonieee_env; __fe_nomask_env;
}
Add femode_t functions. TS 18661-1 defines a type femode_t to represent the set of dynamic floating-point control modes (such as the rounding mode and trap enablement modes), and functions fegetmode and fesetmode to manipulate those modes (without affecting other state such as the raised exception flags) and a corresponding macro FE_DFL_MODE. This patch series implements those interfaces for glibc. This first patch adds the architecture-independent pieces, the x86 and x86_64 implementations, and the <bits/fenv.h> and ABI baseline updates for all architectures so glibc keeps building and passing the ABI tests on all architectures. Subsequent patches add the fegetmode and fesetmode implementations for other architectures. femode_t is generally an integer type - the same type as fenv_t, or as the single element of fenv_t where fenv_t is a structure containing a single integer (or the single relevant element, where it has elements for both status and control registers) - except where architecture properties or consistency with the fenv_t implementation indicate otherwise. FE_DFL_MODE follows FE_DFL_ENV in whether it's a magic pointer value (-1 cast to const femode_t *), a value that can be distinguished from valid pointers by its high bits but otherwise contains a representation of the desired register contents, or a pointer to a constant variable (the powerpc case; __fe_dfl_mode is added as an exported constant object, an alias to __fe_dfl_env). Note that where architectures (that share a register between control and status bits) gain definitions of new floating-point control or status bits in future, the implementations of fesetmode for those architectures may need updating (depending on whether the new bits are control or status bits and what the implementation does with previously unknown bits), just like existing implementations of <fenv.h> functions that take care not to touch reserved bits may need updating when the set of reserved bits changes. (As any new bits are outside the scope of ISO C, that's just a quality-of-implementation issue for supporting them, not a conformance issue.) As with fenv_t, femode_t should properly include any software DFP rounding mode (and for both fenv_t and femode_t I'd consider that fragment of DFP support appropriate for inclusion in glibc even in the absence of the rest of libdfp; hardware DFP rounding modes should already be included if the definitions of which bits are status / control bits are correct). Tested for x86_64, x86, mips64 (hard float, and soft float to test the fallback version), arm (hard float) and powerpc (hard float, soft float and e500). Other architecture versions are untested. * math/fegetmode.c: New file. * math/fesetmode.c: Likewise. * sysdeps/i386/fpu/fegetmode.c: Likewise. * sysdeps/i386/fpu/fesetmode.c: Likewise. * sysdeps/x86_64/fpu/fegetmode.c: Likewise. * sysdeps/x86_64/fpu/fesetmode.c: Likewise. * math/fenv.h: Update comment on inclusion of <bits/fenv.h>. [__GLIBC_USE (IEC_60559_BFP_EXT)] (fegetmode): New function declaration. [__GLIBC_USE (IEC_60559_BFP_EXT)] (fesetmode): Likewise. * bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/aarch64/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/alpha/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/arm/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/hppa/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/ia64/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/m68k/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/microblaze/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/mips/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/nios2/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/powerpc/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (__fe_dfl_mode): New variable declaration. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/s390/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/sh/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/sparc/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/tile/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/x86/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * manual/arith.texi (FE_DFL_MODE): Document macro. (fegetmode): Document function. (fesetmode): Likewise. * math/Versions (fegetmode): New libm symbol at version GLIBC_2.25. (fesetmode): Likewise. * math/Makefile (libm-support): Add fegetmode and fesetmode. (tests): Add test-femode and test-femode-traps. * math/test-femode-traps.c: New file. * math/test-femode.c: Likewise. * sysdeps/powerpc/fpu/fenv_const.c (__fe_dfl_mode): Declare as alias for __fe_dfl_env. * sysdeps/powerpc/nofpu/fenv_const.c (__fe_dfl_mode): Likewise. * sysdeps/powerpc/powerpc32/e500/nofpu/fenv_const.c (__fe_dfl_mode): Likewise. * sysdeps/powerpc/Versions (__fe_dfl_mode): New libm symbol at version GLIBC_2.25. * sysdeps/nacl/libm.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
2016-09-07 16:40:09 +00:00
GLIBC_2.25 {
__fe_dfl_mode;
}
}
Update. 2004-02-13 Steven Munroe <sjmunroe@us.ibm.com> * sysdeps/powerpc/powerpc64/__longjmp-common.S: New file. * sysdeps/powerpc/powerpc64/__longjmp.S [NOT_IN_libc](__longjmp): Non-versioned __longjmp for rtld-__longjmp. [!NOT_IN_libc](__vmx__longjmp): Add VMX reg support and define as default version of __longjmp. [SHARED && SHLIB_COMPAT (libc, GLIBC_2_3, GLIBC_2_3_4)] (__novmx__longjmp): Original version of __longjmp. * sysdeps/powerpc/powerpc64/bsd-_setjmp.S [NOT_IN_libc](_setjmp): Non-versioned _setjmp for rtld-_setjmp. [!NOT_IN_libc](__vmx_setjmp): Branch to __vmx__sigsetjmp and define as default version of _setjmp. [SHARED && SHLIB_COMPAT (libc, GLIBC_2_3, GLIBC_2_3_4)] (__novmx_setjmp): Original version of _setjmp. * sysdeps/powerpc/powerpc64/bsd-setjmp.S (__vmxsetjmp): Branch to __vmx__sigsetjmp and define as default version of setjmp. [SHARED && SHLIB_COMPAT (libc, GLIBC_2_3, GLIBC_2_3_4)] (__novmxsetjmp): Original version of setjmp. * sysdeps/powerpc/powerpc64/setjmp-common.S: New file. * sysdeps/powerpc/powerpc64/setjmp.S [NOT_IN_libc](__setjmp): Non-versioned __sigsetjmp for rtld-setjmp. [!NOT_IN_libc](__vmx__sigsetjmp): Add VMX reg support and define as default version of __sigsetjmp. [SHARED && SHLIB_COMPAT (libc, GLIBC_2_3, GLIBC_2_3_4)] (__novmx__sigsetjmp): Original version of __sigsetjmp. * sysdeps/powerpc/powerpc32/__longjmp-common.S: New File * sysdeps/powerpc/powerpc32/__longjmp.S [NOT_IN_libc](__longjmp): Non-versioned __longjmp for rtld-__longjmp. [!NOT_IN_libc](__vmx__longjmp): Add VMX reg support and define as default version of __longjmp. [SHARED && SHLIB_COMPAT (libc, GLIBC_2_0, GLIBC_2_3_4)] (__novmx__longjmp): Original version of __longjmp. * sysdeps/powerpc/powerpc32/bsd-_setjmp.S [NOT_IN_libc](_setjmp): Non-versioned _setjmp for rtld-_setjmp. [!NOT_IN_libc](__vmx_setjmp): Branch to __vmx__sigsetjmp and define as default version of _setjmp. [SHARED && SHLIB_COMPAT (libc, GLIBC_2_0, GLIBC_2_3_4)] (__novmx_setjmp): Original version of _setjmp. * sysdeps/powerpc/powerpc32/bsd-setjmp.S (__vmxsetjmp): Branch to __vmx__sigsetjmp and define as default version of setjmp. [SHARED && SHLIB_COMPAT (libc, GLIBC_2_0, GLIBC_2_3_4)] (__novmxsetjmp): Original version of setjmp. * sysdeps/powerpc/powerpc32/fpu/__longjmp-common.S: New file. * sysdeps/powerpc/powerpc32/fpu/__longjmp.S [NOT_IN_libc](__longjmp): Non-versioned __longjmp for rtld-__longjmp. [!NOT_IN_libc](__vmx__longjmp): Add VMX reg support and define as default version of __longjmp. [SHARED && SHLIB_COMPAT (libc, GLIBC_2_0, GLIBC_2_3_4)] (__novmx__longjmp): Original version of __longjmp. * sysdeps/powerpc/powerpc32/fpu/setjmp-common.S: New file. * sysdeps/powerpc/powerpc32/fpu/setjmp.S [NOT_IN_libc](__setjmp): Non-versioned __sigsetjmp for rtld-setjmp. [!NOT_IN_libc](__vmx__sigsetjmp): Add VMX reg support and define as default version of __sigsetjmp. [SHARED && SHLIB_COMPAT (libc, GLIBC_2_0, GLIBC_2_3_4)] (__novmx__sigsetjmp): Original version of __sigsetjmp. * sysdeps/powerpc/powerpc32/setjmp-common.S: New file. * sysdeps/powerpc/powerpc32/setjmp.S [NOT_IN_libc](__setjmp): Non-versioned __sigsetjmp for rtld-setjmp. [!NOT_IN_libc](__vmx__sigsetjmp): Add VMX reg support and define as default version of __sigsetjmp. [SHARED && SHLIB_COMPAT (libc, GLIBC_2_0, GLIBC_2_3_4)] (__novmx__sigsetjmp): Original version of __sigsetjmp. * sysdeps/powerpc/Dist: New File. * sysdeps/powerpc/Makefile (sysdep_routines): Add novmx-longjmp.c and novmx-sigjmp.c * sysdeps/powerpc/Versions (libc): To GLIBC_2.3_4 add _longjmp, __sigsetjmp, _setjmp, longjmp, and setjmp. To GLIBC_PRIVATE add __novmx__libc_longjmp, __novmx__libc_siglongjmp, __vmx__libc_longjmp, and __vmx__libc_siglongjmp. * sysdeps/powerpc/bits/setjmp.h: Define JB_VRSAVE, JB_VRS, and adjust JB_SIZE to add VMX regs to __jmp_buf. * sysdeps/powerpc/longjmp.c: New file. * sysdeps/powerpc/novmxsetjmp.h: New file. * sysdeps/powerpc/novmx-longjmp.c: New file. * sysdeps/powerpc/novmx-sigjmp.c: New file. * sysdeps/powerpc/sigjmp.c: New file.
2004-02-14 05:16:57 +00:00
libc {
GLIBC_2.3.4 {
_longjmp; __sigsetjmp; _setjmp;
longjmp; setjmp;
}
GLIBC_PRIVATE {
__novmx__libc_longjmp; __novmx__libc_siglongjmp;
__vmx__libc_longjmp; __vmx__libc_siglongjmp;
}
}
powerpc __tls_get_addr call optimization This patch is glibc support for a PowerPC TLS optimization, inspired by Alexandre Oliva's TLS optimization for other processors, http://www.lsd.ic.unicamp.br/~oliva/writeups/TLS/RFC-TLSDESC-x86.txt In essence, this optimization uses a zero module id in the tls_index GOT entry to indicate that a TLS variable is allocated space in the static TLS area. A special plt call linker stub for __tls_get_addr checks for such a tls_index and if found, returns the offset immediately. The linker communicates the fact that the special __tls_get_addr stub is used by setting a bit in the dynamic tag DT_PPC64_OPT/DT_PPC_OPT. glibc communicates to the linker that this optimization is available by the presence of __tls_get_addr_opt. tst-tlsmod2.so is built with -Wl,--no-tls-get-addr-optimize for tst-tls-dlinfo, which otherwise would fail since it tests that no static tls is allocated. The ld option --no-tls-get-addr-optimize has been available since binutils-2.20 so doesn't need a configure test. * NEWS: Advertise TLS optimization. * elf/elf.h (R_PPC_TLSGD, R_PPC_TLSLD, DT_PPC_OPT, PPC_OPT_TLS): Define. (DT_PPC_NUM): Increment. * elf/dynamic-link.h (HAVE_STATIC_TLS): Define. (CHECK_STATIC_TLS): Use here. * sysdeps/powerpc/powerpc32/dl-machine.h (elf_machine_rela): Optimize TLS descriptors. * sysdeps/powerpc/powerpc64/dl-machine.h (elf_machine_rela): Likewise. * sysdeps/powerpc/dl-tls.c: New file. * sysdeps/powerpc/Versions: Add __tls_get_addr_opt. * sysdeps/powerpc/tst-tlsopt-powerpc.c: New tls test. * sysdeps/unix/sysv/linux/powerpc/Makefile: Add new test. Build tst-tlsmod2.so with --no-tls-get-addr-optimize. * sysdeps/unix/sysv/linux/powerpc/powerpc32/ld.abilist: Update. * sysdeps/unix/sysv/linux/powerpc/powerpc64/ld.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/ld-le.abilist: Likewise.
2015-03-25 05:23:47 +00:00
ld {
GLIBC_2.22 {
__tls_get_addr_opt;
}
powerpc: Add hwcap/hwcap2/platform data to TCB. This patch adds a new feature for powerpc. In order to get faster access to the HWCAP/HWCAP2 bits and platform number (i.e. for implementing __builtin_cpu_is () / __builtin_cpu_supports () in GCC) without the overhead of reading from the auxiliary vector, we now reserve space for them in the TCB. This is an ABI change for GLIBC 2.23. A new versioned symbol '__parse_hwcap_and_convert_at_platform' is available to get the data from the auxiliary vector and parse it, and store it for later use in the TLS initialization code. This function is called very early (in _dl_sysdep_start () via DL_PLATFORM_INFO for the dynamic linking case, and in __libc_start_main () for the static linking case) to make sure the data is available at the time of TLS initialization. * sysdeps/powerpc/Makefile (sysdep-dl-routines): Add hwcapinfo. (sysdep_routines): Likewise. (sysdep-rtld-routines): Likewise. [$(subdir) = nptl](tests): Add test-get_hwcap and test-get_hwcap-static [$(subdir) = nptl](tests-static): test-get_hwcap-static * sysdeps/powerpc/Versions: Added new __parse_hwcap_and_convert_at_platform symbol to GLIBC-2.23. * sysdeps/powerpc/hwcapinfo.c: New file. (__tcb_parse_hwcap_and_convert_at_platform): New function to initialize and parse hwcap, hwcap2 and platform number information. * sysdeps/powerpc/hwcapinfo.h: New file. Creates global variables to store HWCAP+HWCAP2 and platform number. * sysdeps/powerpc/nptl/tcb-offsets.sym: Added new offsets for HWCAP+HWCAP2 and platform number in the TCB. * sysdeps/powerpc/nptl/tls.h: New functionality. Stores the HWCAP, HWCAP2 and platform number in the TCB. (dtv): Added new fields for HWCAP+HWCAP2 and platform number. (TLS_INIT_TP): Included calls to add the hwcap and at_platform values in the TCB in TP initialization. (TLS_DEFINE_INIT_TP): Likewise. (THREAD_GET_HWCAP): New macro. (THREAD_SET_HWCAP): Likewise. (THREAD_GET_AT_PLATFORM): Likewise. (THREAD_SET_AT_PLATFORM): Likewise. * sysdeps/powerpc/powerpc32/dl-machine.h: (dl_platform_init): New function that calls __parse_hwcap_and_convert_at_platform for the dymanic linking case for powerpc32. * sysdeps/powerpc/powerpc64/dl-machine.h: Likewise, for powerpc64. * sysdeps/powerpc/test-get_hwcap-static.c: New file. Testcase for this functionality, static linking case. * sysdeps/powerpc/test-get_hwcap.c: New file. Likewise, dynamic linking case. * sysdeps/unix/sysv/linux/powerpc/libc-start.c: Added call to __parse_hwcap_and_convert_at_platform for the static linking case. * sysdeps/unix/sysv/linux/powerpc/powerpc32/ld.abilist: Included the new __parse_hwcap_and_convert_at_platform symbol in the ABI list for GLIBC 2.23. * sysdeps/unix/sysv/linux/powerpc/powerpc64/ld-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/ld.abilist: Likewise.
2015-10-23 00:26:58 +00:00
GLIBC_2.23 {
# Symbol used to version control when the ABI started to specify that HWCAP
# and AT_PLATFORM data should be stored into the TCB.
__parse_hwcap_and_convert_at_platform;
}
powerpc __tls_get_addr call optimization This patch is glibc support for a PowerPC TLS optimization, inspired by Alexandre Oliva's TLS optimization for other processors, http://www.lsd.ic.unicamp.br/~oliva/writeups/TLS/RFC-TLSDESC-x86.txt In essence, this optimization uses a zero module id in the tls_index GOT entry to indicate that a TLS variable is allocated space in the static TLS area. A special plt call linker stub for __tls_get_addr checks for such a tls_index and if found, returns the offset immediately. The linker communicates the fact that the special __tls_get_addr stub is used by setting a bit in the dynamic tag DT_PPC64_OPT/DT_PPC_OPT. glibc communicates to the linker that this optimization is available by the presence of __tls_get_addr_opt. tst-tlsmod2.so is built with -Wl,--no-tls-get-addr-optimize for tst-tls-dlinfo, which otherwise would fail since it tests that no static tls is allocated. The ld option --no-tls-get-addr-optimize has been available since binutils-2.20 so doesn't need a configure test. * NEWS: Advertise TLS optimization. * elf/elf.h (R_PPC_TLSGD, R_PPC_TLSLD, DT_PPC_OPT, PPC_OPT_TLS): Define. (DT_PPC_NUM): Increment. * elf/dynamic-link.h (HAVE_STATIC_TLS): Define. (CHECK_STATIC_TLS): Use here. * sysdeps/powerpc/powerpc32/dl-machine.h (elf_machine_rela): Optimize TLS descriptors. * sysdeps/powerpc/powerpc64/dl-machine.h (elf_machine_rela): Likewise. * sysdeps/powerpc/dl-tls.c: New file. * sysdeps/powerpc/Versions: Add __tls_get_addr_opt. * sysdeps/powerpc/tst-tlsopt-powerpc.c: New tls test. * sysdeps/unix/sysv/linux/powerpc/Makefile: Add new test. Build tst-tlsmod2.so with --no-tls-get-addr-optimize. * sysdeps/unix/sysv/linux/powerpc/powerpc32/ld.abilist: Update. * sysdeps/unix/sysv/linux/powerpc/powerpc64/ld.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/ld-le.abilist: Likewise.
2015-03-25 05:23:47 +00:00
}