glibc/sysdeps/unix/sysv/linux/mmap.c

53 lines
1.6 KiB
C
Raw Normal View History

Consolidate Linux mmap implementation (BZ#21270) This patch consolidates all Linux mmap implementations on default sysdeps/unix/sysv/linux/mmap{64}.c one. To accomodate all required architecture specific requeriments a new internal header is created (mmap_internal.h) where each architecture add its specific code requirements. Currently only x86_64 (to define MMAP_PREPARE to add MAP_32BITS), s390 (which have a different kernel ABI for mmap), m68k (which have variable minimum page sizes), and MIPS n32 (which zero extend the offset to handle negative one correctly) redefine the new header. The patch also fixes BZ#21270 where default mmap64 on architectures which uses mmap2 silent truncates large offsets value (larger than 1 << (page shift + 8 * sizeof (off_t)) or 1<<44 on architectures with 4096 bytes page size). The new consolidate implementation returns EINVAL as allowed by POSIX. It also adds a tests for on current tst-mmap-offset one. I have run a full make check on x86_64, x86_64-32, i686, aarch64, armhf, powerpc, powerpc64le, sparc64, and sparcv9 without any regressions. I also ran some basic tests (tst-mmap-offset) on sh4, m68k, and on qemu simulated MIPS32 and MIPS64. [BZ #21270] * posix/tst-mmap-offset.c (do_prepare): New function. (do_test): Rename to do_test_bz18877 and use FAIL_RET. (do_test_bz21270): New function. * sysdeps/unix/sysv/linux/aarch64/mmap.c: Remove file. * sysdeps/unix/sysv/linux/arm/mmap.c: Remove file. * sysdeps/unix/sysv/linux/generic/wordsize-32/mmap.c: Likewise. * sysdeps/unix/sysv/linux/hppa/mmap.c: Likewise. * sysdeps/unix/sysv/linux/i386/mmap.c: Likewise. * sysdeps/unix/sysv/linux/m68k/mmap.S: Likewise. * sysdeps/unix/sysv/linux/m68k/mmap64.c: Likewise. * sysdeps/unix/sysv/linux/microblaze/mmap.S: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/mmap.c: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n32/mmap.c: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n64/mmap64.c: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/mmap.S: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/mmap64.S: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/mmap.S: Likewise. * sysdeps/unix/sysv/linux/wordsize-64/mmap.c: Likewise. * sysdeps/unix/sysv/linux/wordsize-64/mmap64.c: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/mmap.c: Likewise. * sysdeps/unix/sysv/linux/mmap_internal.h: New file. * sysdeps/unix/sysv/linux/m68k/mmap_internal.h: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n32/mmap_internal.h: Likewise. * sysdeps/unix/sysv/linux/s390/mmap_internal.h: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/mmap_internal.h: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n64/syscalls.list: Remove mmap from auto-generation list. * sysdeps/unix/sysv/linux/mips/mips64/n32/syscalls.list: Likewise. * sysdeps/unix/sysv/linux/wordsize-64/syscalls.list: Likewise. * sysdeps/unix/sysv/linux/mmap.c: New file. * sysdeps/unix/sysv/linux/mmap64.c (__mmap64): Add check for invalid offsets and support for mmap2 syscall.
2017-04-06 20:01:56 +00:00
/* mmap - map files or devices into memory. Linux version.
Copyright (C) 2017-2019 Free Software Foundation, Inc.
i386: Remove syscall assembly codes with 6 arguments This patch removes i386 assembly implementation for mmap, mmap64, semtimeop now that i386 have 6 argument syscall support from C code and GCC 5 can inline syscalls with 6 arguments. We also compile mmap.c, mmap64.c and semtimedop.c with -fomit-frame-pointer since %ebp may be used to pass the 6th argument to syscall. Fo sysdeps/unix/sysv/linux/i386/mmap.c, with -O2 -march=i686 -mtune=generic, GCC 5.2 now generates: <__mmap>: 0: sub $0x10,%esp 3: mov 0x28(%esp),%eax 7: mov %ebx,(%esp) a: mov 0x18(%esp),%ecx e: mov %esi,0x4(%esp) 12: mov 0x14(%esp),%ebx 16: mov %edi,0x8(%esp) 1a: mov 0x1c(%esp),%edx 1e: test $0xfff,%eax 23: mov 0x20(%esp),%esi 27: mov %ebp,0xc(%esp) 2b: mov 0x24(%esp),%edi 2f: jne 60 <__mmap+0x60> 31: shr $0xc,%eax 34: mov %eax,%ebp 36: mov $0xc0,%eax 3b: call *%gs:0x10 42: cmp $0xfffff000,%eax 47: ja 65 <__mmap+0x65> 49: mov (%esp),%ebx 4c: mov 0x4(%esp),%esi 50: mov 0x8(%esp),%edi 54: mov 0xc(%esp),%ebp 58: add $0x10,%esp 5b: ret 5c: lea 0x0(%esi,%eiz,1),%esi 60: mov $0xffffffea,%eax 65: mov (%esp),%ebx 68: mov 0x4(%esp),%esi 6c: mov 0x8(%esp),%edi 70: mov 0xc(%esp),%ebp 74: add $0x10,%esp 77: jmp 78 <__mmap+0x78> vs sysdeps/unix/sysv/linux/i386/mmap.S: <__mmap>: 0: push %ebp 1: push %ebx 2: push %esi 3: push %edi 4: mov 0x14(%esp),%ebx 8: mov 0x18(%esp),%ecx c: mov 0x1c(%esp),%edx 10: mov 0x20(%esp),%esi 14: mov 0x24(%esp),%edi 18: mov 0x28(%esp),%ebp 1c: test $0xfff,%ebp 22: mov $0xffffffea,%eax 27: jne 38 <__mmap+0x38> 29: shr $0xc,%ebp 2c: mov $0xc0,%eax 31: call *%gs:0x10 38: pop %edi 39: pop %esi 3a: pop %ebx 3b: pop %ebp 3c: cmp $0xfffff000,%eax 41: ja 44 <__mmap+0x44> 43: ret 44: call 45 <__mmap+0x45> 45: R_386_PC32 __x86.get_pc_thunk.cx 49: add $0x2,%ecx 4b: R_386_GOTPC _GLOBAL_OFFSET_TABLE_ 4f: mov 0x0(%ecx),%ecx 51: R_386_TLS_GOTIE __libc_errno 55: neg %eax 57: mov %eax,%gs:(%ecx) 5a: or $0xffffffff,%eax 5d: ret The C version has: 3: mov 0x28(%esp),%eax ... 1e: test $0xfff,%eax ... 31: sar $0xc,%eax 34: mov %eax,%ebp is due to missing $ebx register constraint for inline asm. We have to use "r" constraint with register unsigned int _a6 asm ("ebp") = (unsigned int) (arg6); and compiler chose %eax for offset (arg6) in if (offset & (MMAP_PAGE_UNIT - 1)) * sysdeps/unix/sysv/linux/i386/Makefile (CFLAGS-epoll_pwait.c): Add -fomit-frame-pointer. (CFLAGS-mmap.c): Likewise. (CFLAGS-mmap64.c): Likewise. (CFLAGS-semtimedop.c): Likewise. * sysdeps/unix/sysv/linux/i386/mmap.c: New file. * sysdeps/unix/sysv/linux/i386/mmap.S: Remove file. * sysdeps/unix/sysv/linux/i386/mmap64.S: Likewise. * sysdeps/unix/sysv/linux/i386/semtimedop.S: Likewise.
2015-10-15 11:33:15 +00:00
This file is part of the GNU C Library.
The GNU C Library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version.
The GNU C Library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public
License along with the GNU C Library; if not, see
Prefer https to http for gnu.org and fsf.org URLs Also, change sources.redhat.com to sourceware.org. This patch was automatically generated by running the following shell script, which uses GNU sed, and which avoids modifying files imported from upstream: sed -ri ' s,(http|ftp)(://(.*\.)?(gnu|fsf|sourceware)\.org($|[^.]|\.[^a-z])),https\2,g s,(http|ftp)(://(.*\.)?)sources\.redhat\.com($|[^.]|\.[^a-z]),https\2sourceware.org\4,g ' \ $(find $(git ls-files) -prune -type f \ ! -name '*.po' \ ! -name 'ChangeLog*' \ ! -path COPYING ! -path COPYING.LIB \ ! -path manual/fdl-1.3.texi ! -path manual/lgpl-2.1.texi \ ! -path manual/texinfo.tex ! -path scripts/config.guess \ ! -path scripts/config.sub ! -path scripts/install-sh \ ! -path scripts/mkinstalldirs ! -path scripts/move-if-change \ ! -path INSTALL ! -path locale/programs/charmap-kw.h \ ! -path po/libc.pot ! -path sysdeps/gnu/errlist.c \ ! '(' -name configure \ -execdir test -f configure.ac -o -f configure.in ';' ')' \ ! '(' -name preconfigure \ -execdir test -f preconfigure.ac ';' ')' \ -print) and then by running 'make dist-prepare' to regenerate files built from the altered files, and then executing the following to cleanup: chmod a+x sysdeps/unix/sysv/linux/riscv/configure # Omit irrelevant whitespace and comment-only changes, # perhaps from a slightly-different Autoconf version. git checkout -f \ sysdeps/csky/configure \ sysdeps/hppa/configure \ sysdeps/riscv/configure \ sysdeps/unix/sysv/linux/csky/configure # Omit changes that caused a pre-commit check to fail like this: # remote: *** error: sysdeps/powerpc/powerpc64/ppc-mcount.S: trailing lines git checkout -f \ sysdeps/powerpc/powerpc64/ppc-mcount.S \ sysdeps/unix/sysv/linux/s390/s390-64/syscall.S # Omit change that caused a pre-commit check to fail like this: # remote: *** error: sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S: last line does not end in newline git checkout -f sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S
2019-09-07 05:40:42 +00:00
<https://www.gnu.org/licenses/>. */
i386: Remove syscall assembly codes with 6 arguments This patch removes i386 assembly implementation for mmap, mmap64, semtimeop now that i386 have 6 argument syscall support from C code and GCC 5 can inline syscalls with 6 arguments. We also compile mmap.c, mmap64.c and semtimedop.c with -fomit-frame-pointer since %ebp may be used to pass the 6th argument to syscall. Fo sysdeps/unix/sysv/linux/i386/mmap.c, with -O2 -march=i686 -mtune=generic, GCC 5.2 now generates: <__mmap>: 0: sub $0x10,%esp 3: mov 0x28(%esp),%eax 7: mov %ebx,(%esp) a: mov 0x18(%esp),%ecx e: mov %esi,0x4(%esp) 12: mov 0x14(%esp),%ebx 16: mov %edi,0x8(%esp) 1a: mov 0x1c(%esp),%edx 1e: test $0xfff,%eax 23: mov 0x20(%esp),%esi 27: mov %ebp,0xc(%esp) 2b: mov 0x24(%esp),%edi 2f: jne 60 <__mmap+0x60> 31: shr $0xc,%eax 34: mov %eax,%ebp 36: mov $0xc0,%eax 3b: call *%gs:0x10 42: cmp $0xfffff000,%eax 47: ja 65 <__mmap+0x65> 49: mov (%esp),%ebx 4c: mov 0x4(%esp),%esi 50: mov 0x8(%esp),%edi 54: mov 0xc(%esp),%ebp 58: add $0x10,%esp 5b: ret 5c: lea 0x0(%esi,%eiz,1),%esi 60: mov $0xffffffea,%eax 65: mov (%esp),%ebx 68: mov 0x4(%esp),%esi 6c: mov 0x8(%esp),%edi 70: mov 0xc(%esp),%ebp 74: add $0x10,%esp 77: jmp 78 <__mmap+0x78> vs sysdeps/unix/sysv/linux/i386/mmap.S: <__mmap>: 0: push %ebp 1: push %ebx 2: push %esi 3: push %edi 4: mov 0x14(%esp),%ebx 8: mov 0x18(%esp),%ecx c: mov 0x1c(%esp),%edx 10: mov 0x20(%esp),%esi 14: mov 0x24(%esp),%edi 18: mov 0x28(%esp),%ebp 1c: test $0xfff,%ebp 22: mov $0xffffffea,%eax 27: jne 38 <__mmap+0x38> 29: shr $0xc,%ebp 2c: mov $0xc0,%eax 31: call *%gs:0x10 38: pop %edi 39: pop %esi 3a: pop %ebx 3b: pop %ebp 3c: cmp $0xfffff000,%eax 41: ja 44 <__mmap+0x44> 43: ret 44: call 45 <__mmap+0x45> 45: R_386_PC32 __x86.get_pc_thunk.cx 49: add $0x2,%ecx 4b: R_386_GOTPC _GLOBAL_OFFSET_TABLE_ 4f: mov 0x0(%ecx),%ecx 51: R_386_TLS_GOTIE __libc_errno 55: neg %eax 57: mov %eax,%gs:(%ecx) 5a: or $0xffffffff,%eax 5d: ret The C version has: 3: mov 0x28(%esp),%eax ... 1e: test $0xfff,%eax ... 31: sar $0xc,%eax 34: mov %eax,%ebp is due to missing $ebx register constraint for inline asm. We have to use "r" constraint with register unsigned int _a6 asm ("ebp") = (unsigned int) (arg6); and compiler chose %eax for offset (arg6) in if (offset & (MMAP_PAGE_UNIT - 1)) * sysdeps/unix/sysv/linux/i386/Makefile (CFLAGS-epoll_pwait.c): Add -fomit-frame-pointer. (CFLAGS-mmap.c): Likewise. (CFLAGS-mmap64.c): Likewise. (CFLAGS-semtimedop.c): Likewise. * sysdeps/unix/sysv/linux/i386/mmap.c: New file. * sysdeps/unix/sysv/linux/i386/mmap.S: Remove file. * sysdeps/unix/sysv/linux/i386/mmap64.S: Likewise. * sysdeps/unix/sysv/linux/i386/semtimedop.S: Likewise.
2015-10-15 11:33:15 +00:00
#include <errno.h>
Consolidate Linux mmap implementation (BZ#21270) This patch consolidates all Linux mmap implementations on default sysdeps/unix/sysv/linux/mmap{64}.c one. To accomodate all required architecture specific requeriments a new internal header is created (mmap_internal.h) where each architecture add its specific code requirements. Currently only x86_64 (to define MMAP_PREPARE to add MAP_32BITS), s390 (which have a different kernel ABI for mmap), m68k (which have variable minimum page sizes), and MIPS n32 (which zero extend the offset to handle negative one correctly) redefine the new header. The patch also fixes BZ#21270 where default mmap64 on architectures which uses mmap2 silent truncates large offsets value (larger than 1 << (page shift + 8 * sizeof (off_t)) or 1<<44 on architectures with 4096 bytes page size). The new consolidate implementation returns EINVAL as allowed by POSIX. It also adds a tests for on current tst-mmap-offset one. I have run a full make check on x86_64, x86_64-32, i686, aarch64, armhf, powerpc, powerpc64le, sparc64, and sparcv9 without any regressions. I also ran some basic tests (tst-mmap-offset) on sh4, m68k, and on qemu simulated MIPS32 and MIPS64. [BZ #21270] * posix/tst-mmap-offset.c (do_prepare): New function. (do_test): Rename to do_test_bz18877 and use FAIL_RET. (do_test_bz21270): New function. * sysdeps/unix/sysv/linux/aarch64/mmap.c: Remove file. * sysdeps/unix/sysv/linux/arm/mmap.c: Remove file. * sysdeps/unix/sysv/linux/generic/wordsize-32/mmap.c: Likewise. * sysdeps/unix/sysv/linux/hppa/mmap.c: Likewise. * sysdeps/unix/sysv/linux/i386/mmap.c: Likewise. * sysdeps/unix/sysv/linux/m68k/mmap.S: Likewise. * sysdeps/unix/sysv/linux/m68k/mmap64.c: Likewise. * sysdeps/unix/sysv/linux/microblaze/mmap.S: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/mmap.c: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n32/mmap.c: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n64/mmap64.c: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/mmap.S: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/mmap64.S: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/mmap.S: Likewise. * sysdeps/unix/sysv/linux/wordsize-64/mmap.c: Likewise. * sysdeps/unix/sysv/linux/wordsize-64/mmap64.c: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/mmap.c: Likewise. * sysdeps/unix/sysv/linux/mmap_internal.h: New file. * sysdeps/unix/sysv/linux/m68k/mmap_internal.h: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n32/mmap_internal.h: Likewise. * sysdeps/unix/sysv/linux/s390/mmap_internal.h: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/mmap_internal.h: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n64/syscalls.list: Remove mmap from auto-generation list. * sysdeps/unix/sysv/linux/mips/mips64/n32/syscalls.list: Likewise. * sysdeps/unix/sysv/linux/wordsize-64/syscalls.list: Likewise. * sysdeps/unix/sysv/linux/mmap.c: New file. * sysdeps/unix/sysv/linux/mmap64.c (__mmap64): Add check for invalid offsets and support for mmap2 syscall.
2017-04-06 20:01:56 +00:00
#include <unistd.h>
#include <sys/mman.h>
i386: Remove syscall assembly codes with 6 arguments This patch removes i386 assembly implementation for mmap, mmap64, semtimeop now that i386 have 6 argument syscall support from C code and GCC 5 can inline syscalls with 6 arguments. We also compile mmap.c, mmap64.c and semtimedop.c with -fomit-frame-pointer since %ebp may be used to pass the 6th argument to syscall. Fo sysdeps/unix/sysv/linux/i386/mmap.c, with -O2 -march=i686 -mtune=generic, GCC 5.2 now generates: <__mmap>: 0: sub $0x10,%esp 3: mov 0x28(%esp),%eax 7: mov %ebx,(%esp) a: mov 0x18(%esp),%ecx e: mov %esi,0x4(%esp) 12: mov 0x14(%esp),%ebx 16: mov %edi,0x8(%esp) 1a: mov 0x1c(%esp),%edx 1e: test $0xfff,%eax 23: mov 0x20(%esp),%esi 27: mov %ebp,0xc(%esp) 2b: mov 0x24(%esp),%edi 2f: jne 60 <__mmap+0x60> 31: shr $0xc,%eax 34: mov %eax,%ebp 36: mov $0xc0,%eax 3b: call *%gs:0x10 42: cmp $0xfffff000,%eax 47: ja 65 <__mmap+0x65> 49: mov (%esp),%ebx 4c: mov 0x4(%esp),%esi 50: mov 0x8(%esp),%edi 54: mov 0xc(%esp),%ebp 58: add $0x10,%esp 5b: ret 5c: lea 0x0(%esi,%eiz,1),%esi 60: mov $0xffffffea,%eax 65: mov (%esp),%ebx 68: mov 0x4(%esp),%esi 6c: mov 0x8(%esp),%edi 70: mov 0xc(%esp),%ebp 74: add $0x10,%esp 77: jmp 78 <__mmap+0x78> vs sysdeps/unix/sysv/linux/i386/mmap.S: <__mmap>: 0: push %ebp 1: push %ebx 2: push %esi 3: push %edi 4: mov 0x14(%esp),%ebx 8: mov 0x18(%esp),%ecx c: mov 0x1c(%esp),%edx 10: mov 0x20(%esp),%esi 14: mov 0x24(%esp),%edi 18: mov 0x28(%esp),%ebp 1c: test $0xfff,%ebp 22: mov $0xffffffea,%eax 27: jne 38 <__mmap+0x38> 29: shr $0xc,%ebp 2c: mov $0xc0,%eax 31: call *%gs:0x10 38: pop %edi 39: pop %esi 3a: pop %ebx 3b: pop %ebp 3c: cmp $0xfffff000,%eax 41: ja 44 <__mmap+0x44> 43: ret 44: call 45 <__mmap+0x45> 45: R_386_PC32 __x86.get_pc_thunk.cx 49: add $0x2,%ecx 4b: R_386_GOTPC _GLOBAL_OFFSET_TABLE_ 4f: mov 0x0(%ecx),%ecx 51: R_386_TLS_GOTIE __libc_errno 55: neg %eax 57: mov %eax,%gs:(%ecx) 5a: or $0xffffffff,%eax 5d: ret The C version has: 3: mov 0x28(%esp),%eax ... 1e: test $0xfff,%eax ... 31: sar $0xc,%eax 34: mov %eax,%ebp is due to missing $ebx register constraint for inline asm. We have to use "r" constraint with register unsigned int _a6 asm ("ebp") = (unsigned int) (arg6); and compiler chose %eax for offset (arg6) in if (offset & (MMAP_PAGE_UNIT - 1)) * sysdeps/unix/sysv/linux/i386/Makefile (CFLAGS-epoll_pwait.c): Add -fomit-frame-pointer. (CFLAGS-mmap.c): Likewise. (CFLAGS-mmap64.c): Likewise. (CFLAGS-semtimedop.c): Likewise. * sysdeps/unix/sysv/linux/i386/mmap.c: New file. * sysdeps/unix/sysv/linux/i386/mmap.S: Remove file. * sysdeps/unix/sysv/linux/i386/mmap64.S: Likewise. * sysdeps/unix/sysv/linux/i386/semtimedop.S: Likewise.
2015-10-15 11:33:15 +00:00
#include <sysdep.h>
Consolidate Linux mmap implementation (BZ#21270) This patch consolidates all Linux mmap implementations on default sysdeps/unix/sysv/linux/mmap{64}.c one. To accomodate all required architecture specific requeriments a new internal header is created (mmap_internal.h) where each architecture add its specific code requirements. Currently only x86_64 (to define MMAP_PREPARE to add MAP_32BITS), s390 (which have a different kernel ABI for mmap), m68k (which have variable minimum page sizes), and MIPS n32 (which zero extend the offset to handle negative one correctly) redefine the new header. The patch also fixes BZ#21270 where default mmap64 on architectures which uses mmap2 silent truncates large offsets value (larger than 1 << (page shift + 8 * sizeof (off_t)) or 1<<44 on architectures with 4096 bytes page size). The new consolidate implementation returns EINVAL as allowed by POSIX. It also adds a tests for on current tst-mmap-offset one. I have run a full make check on x86_64, x86_64-32, i686, aarch64, armhf, powerpc, powerpc64le, sparc64, and sparcv9 without any regressions. I also ran some basic tests (tst-mmap-offset) on sh4, m68k, and on qemu simulated MIPS32 and MIPS64. [BZ #21270] * posix/tst-mmap-offset.c (do_prepare): New function. (do_test): Rename to do_test_bz18877 and use FAIL_RET. (do_test_bz21270): New function. * sysdeps/unix/sysv/linux/aarch64/mmap.c: Remove file. * sysdeps/unix/sysv/linux/arm/mmap.c: Remove file. * sysdeps/unix/sysv/linux/generic/wordsize-32/mmap.c: Likewise. * sysdeps/unix/sysv/linux/hppa/mmap.c: Likewise. * sysdeps/unix/sysv/linux/i386/mmap.c: Likewise. * sysdeps/unix/sysv/linux/m68k/mmap.S: Likewise. * sysdeps/unix/sysv/linux/m68k/mmap64.c: Likewise. * sysdeps/unix/sysv/linux/microblaze/mmap.S: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/mmap.c: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n32/mmap.c: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n64/mmap64.c: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/mmap.S: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/mmap64.S: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/mmap.S: Likewise. * sysdeps/unix/sysv/linux/wordsize-64/mmap.c: Likewise. * sysdeps/unix/sysv/linux/wordsize-64/mmap64.c: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/mmap.c: Likewise. * sysdeps/unix/sysv/linux/mmap_internal.h: New file. * sysdeps/unix/sysv/linux/m68k/mmap_internal.h: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n32/mmap_internal.h: Likewise. * sysdeps/unix/sysv/linux/s390/mmap_internal.h: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/mmap_internal.h: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n64/syscalls.list: Remove mmap from auto-generation list. * sysdeps/unix/sysv/linux/mips/mips64/n32/syscalls.list: Likewise. * sysdeps/unix/sysv/linux/wordsize-64/syscalls.list: Likewise. * sysdeps/unix/sysv/linux/mmap.c: New file. * sysdeps/unix/sysv/linux/mmap64.c (__mmap64): Add check for invalid offsets and support for mmap2 syscall.
2017-04-06 20:01:56 +00:00
#include <stdint.h>
i386: Remove syscall assembly codes with 6 arguments This patch removes i386 assembly implementation for mmap, mmap64, semtimeop now that i386 have 6 argument syscall support from C code and GCC 5 can inline syscalls with 6 arguments. We also compile mmap.c, mmap64.c and semtimedop.c with -fomit-frame-pointer since %ebp may be used to pass the 6th argument to syscall. Fo sysdeps/unix/sysv/linux/i386/mmap.c, with -O2 -march=i686 -mtune=generic, GCC 5.2 now generates: <__mmap>: 0: sub $0x10,%esp 3: mov 0x28(%esp),%eax 7: mov %ebx,(%esp) a: mov 0x18(%esp),%ecx e: mov %esi,0x4(%esp) 12: mov 0x14(%esp),%ebx 16: mov %edi,0x8(%esp) 1a: mov 0x1c(%esp),%edx 1e: test $0xfff,%eax 23: mov 0x20(%esp),%esi 27: mov %ebp,0xc(%esp) 2b: mov 0x24(%esp),%edi 2f: jne 60 <__mmap+0x60> 31: shr $0xc,%eax 34: mov %eax,%ebp 36: mov $0xc0,%eax 3b: call *%gs:0x10 42: cmp $0xfffff000,%eax 47: ja 65 <__mmap+0x65> 49: mov (%esp),%ebx 4c: mov 0x4(%esp),%esi 50: mov 0x8(%esp),%edi 54: mov 0xc(%esp),%ebp 58: add $0x10,%esp 5b: ret 5c: lea 0x0(%esi,%eiz,1),%esi 60: mov $0xffffffea,%eax 65: mov (%esp),%ebx 68: mov 0x4(%esp),%esi 6c: mov 0x8(%esp),%edi 70: mov 0xc(%esp),%ebp 74: add $0x10,%esp 77: jmp 78 <__mmap+0x78> vs sysdeps/unix/sysv/linux/i386/mmap.S: <__mmap>: 0: push %ebp 1: push %ebx 2: push %esi 3: push %edi 4: mov 0x14(%esp),%ebx 8: mov 0x18(%esp),%ecx c: mov 0x1c(%esp),%edx 10: mov 0x20(%esp),%esi 14: mov 0x24(%esp),%edi 18: mov 0x28(%esp),%ebp 1c: test $0xfff,%ebp 22: mov $0xffffffea,%eax 27: jne 38 <__mmap+0x38> 29: shr $0xc,%ebp 2c: mov $0xc0,%eax 31: call *%gs:0x10 38: pop %edi 39: pop %esi 3a: pop %ebx 3b: pop %ebp 3c: cmp $0xfffff000,%eax 41: ja 44 <__mmap+0x44> 43: ret 44: call 45 <__mmap+0x45> 45: R_386_PC32 __x86.get_pc_thunk.cx 49: add $0x2,%ecx 4b: R_386_GOTPC _GLOBAL_OFFSET_TABLE_ 4f: mov 0x0(%ecx),%ecx 51: R_386_TLS_GOTIE __libc_errno 55: neg %eax 57: mov %eax,%gs:(%ecx) 5a: or $0xffffffff,%eax 5d: ret The C version has: 3: mov 0x28(%esp),%eax ... 1e: test $0xfff,%eax ... 31: sar $0xc,%eax 34: mov %eax,%ebp is due to missing $ebx register constraint for inline asm. We have to use "r" constraint with register unsigned int _a6 asm ("ebp") = (unsigned int) (arg6); and compiler chose %eax for offset (arg6) in if (offset & (MMAP_PAGE_UNIT - 1)) * sysdeps/unix/sysv/linux/i386/Makefile (CFLAGS-epoll_pwait.c): Add -fomit-frame-pointer. (CFLAGS-mmap.c): Likewise. (CFLAGS-mmap64.c): Likewise. (CFLAGS-semtimedop.c): Likewise. * sysdeps/unix/sysv/linux/i386/mmap.c: New file. * sysdeps/unix/sysv/linux/i386/mmap.S: Remove file. * sysdeps/unix/sysv/linux/i386/mmap64.S: Likewise. * sysdeps/unix/sysv/linux/i386/semtimedop.S: Likewise.
2015-10-15 11:33:15 +00:00
Consolidate Linux mmap implementation (BZ#21270) This patch consolidates all Linux mmap implementations on default sysdeps/unix/sysv/linux/mmap{64}.c one. To accomodate all required architecture specific requeriments a new internal header is created (mmap_internal.h) where each architecture add its specific code requirements. Currently only x86_64 (to define MMAP_PREPARE to add MAP_32BITS), s390 (which have a different kernel ABI for mmap), m68k (which have variable minimum page sizes), and MIPS n32 (which zero extend the offset to handle negative one correctly) redefine the new header. The patch also fixes BZ#21270 where default mmap64 on architectures which uses mmap2 silent truncates large offsets value (larger than 1 << (page shift + 8 * sizeof (off_t)) or 1<<44 on architectures with 4096 bytes page size). The new consolidate implementation returns EINVAL as allowed by POSIX. It also adds a tests for on current tst-mmap-offset one. I have run a full make check on x86_64, x86_64-32, i686, aarch64, armhf, powerpc, powerpc64le, sparc64, and sparcv9 without any regressions. I also ran some basic tests (tst-mmap-offset) on sh4, m68k, and on qemu simulated MIPS32 and MIPS64. [BZ #21270] * posix/tst-mmap-offset.c (do_prepare): New function. (do_test): Rename to do_test_bz18877 and use FAIL_RET. (do_test_bz21270): New function. * sysdeps/unix/sysv/linux/aarch64/mmap.c: Remove file. * sysdeps/unix/sysv/linux/arm/mmap.c: Remove file. * sysdeps/unix/sysv/linux/generic/wordsize-32/mmap.c: Likewise. * sysdeps/unix/sysv/linux/hppa/mmap.c: Likewise. * sysdeps/unix/sysv/linux/i386/mmap.c: Likewise. * sysdeps/unix/sysv/linux/m68k/mmap.S: Likewise. * sysdeps/unix/sysv/linux/m68k/mmap64.c: Likewise. * sysdeps/unix/sysv/linux/microblaze/mmap.S: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/mmap.c: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n32/mmap.c: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n64/mmap64.c: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/mmap.S: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/mmap64.S: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/mmap.S: Likewise. * sysdeps/unix/sysv/linux/wordsize-64/mmap.c: Likewise. * sysdeps/unix/sysv/linux/wordsize-64/mmap64.c: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/mmap.c: Likewise. * sysdeps/unix/sysv/linux/mmap_internal.h: New file. * sysdeps/unix/sysv/linux/m68k/mmap_internal.h: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n32/mmap_internal.h: Likewise. * sysdeps/unix/sysv/linux/s390/mmap_internal.h: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/mmap_internal.h: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n64/syscalls.list: Remove mmap from auto-generation list. * sysdeps/unix/sysv/linux/mips/mips64/n32/syscalls.list: Likewise. * sysdeps/unix/sysv/linux/wordsize-64/syscalls.list: Likewise. * sysdeps/unix/sysv/linux/mmap.c: New file. * sysdeps/unix/sysv/linux/mmap64.c (__mmap64): Add check for invalid offsets and support for mmap2 syscall.
2017-04-06 20:01:56 +00:00
#ifndef __OFF_T_MATCHES_OFF64_T
# include <mmap_internal.h>
i386: Remove syscall assembly codes with 6 arguments This patch removes i386 assembly implementation for mmap, mmap64, semtimeop now that i386 have 6 argument syscall support from C code and GCC 5 can inline syscalls with 6 arguments. We also compile mmap.c, mmap64.c and semtimedop.c with -fomit-frame-pointer since %ebp may be used to pass the 6th argument to syscall. Fo sysdeps/unix/sysv/linux/i386/mmap.c, with -O2 -march=i686 -mtune=generic, GCC 5.2 now generates: <__mmap>: 0: sub $0x10,%esp 3: mov 0x28(%esp),%eax 7: mov %ebx,(%esp) a: mov 0x18(%esp),%ecx e: mov %esi,0x4(%esp) 12: mov 0x14(%esp),%ebx 16: mov %edi,0x8(%esp) 1a: mov 0x1c(%esp),%edx 1e: test $0xfff,%eax 23: mov 0x20(%esp),%esi 27: mov %ebp,0xc(%esp) 2b: mov 0x24(%esp),%edi 2f: jne 60 <__mmap+0x60> 31: shr $0xc,%eax 34: mov %eax,%ebp 36: mov $0xc0,%eax 3b: call *%gs:0x10 42: cmp $0xfffff000,%eax 47: ja 65 <__mmap+0x65> 49: mov (%esp),%ebx 4c: mov 0x4(%esp),%esi 50: mov 0x8(%esp),%edi 54: mov 0xc(%esp),%ebp 58: add $0x10,%esp 5b: ret 5c: lea 0x0(%esi,%eiz,1),%esi 60: mov $0xffffffea,%eax 65: mov (%esp),%ebx 68: mov 0x4(%esp),%esi 6c: mov 0x8(%esp),%edi 70: mov 0xc(%esp),%ebp 74: add $0x10,%esp 77: jmp 78 <__mmap+0x78> vs sysdeps/unix/sysv/linux/i386/mmap.S: <__mmap>: 0: push %ebp 1: push %ebx 2: push %esi 3: push %edi 4: mov 0x14(%esp),%ebx 8: mov 0x18(%esp),%ecx c: mov 0x1c(%esp),%edx 10: mov 0x20(%esp),%esi 14: mov 0x24(%esp),%edi 18: mov 0x28(%esp),%ebp 1c: test $0xfff,%ebp 22: mov $0xffffffea,%eax 27: jne 38 <__mmap+0x38> 29: shr $0xc,%ebp 2c: mov $0xc0,%eax 31: call *%gs:0x10 38: pop %edi 39: pop %esi 3a: pop %ebx 3b: pop %ebp 3c: cmp $0xfffff000,%eax 41: ja 44 <__mmap+0x44> 43: ret 44: call 45 <__mmap+0x45> 45: R_386_PC32 __x86.get_pc_thunk.cx 49: add $0x2,%ecx 4b: R_386_GOTPC _GLOBAL_OFFSET_TABLE_ 4f: mov 0x0(%ecx),%ecx 51: R_386_TLS_GOTIE __libc_errno 55: neg %eax 57: mov %eax,%gs:(%ecx) 5a: or $0xffffffff,%eax 5d: ret The C version has: 3: mov 0x28(%esp),%eax ... 1e: test $0xfff,%eax ... 31: sar $0xc,%eax 34: mov %eax,%ebp is due to missing $ebx register constraint for inline asm. We have to use "r" constraint with register unsigned int _a6 asm ("ebp") = (unsigned int) (arg6); and compiler chose %eax for offset (arg6) in if (offset & (MMAP_PAGE_UNIT - 1)) * sysdeps/unix/sysv/linux/i386/Makefile (CFLAGS-epoll_pwait.c): Add -fomit-frame-pointer. (CFLAGS-mmap.c): Likewise. (CFLAGS-mmap64.c): Likewise. (CFLAGS-semtimedop.c): Likewise. * sysdeps/unix/sysv/linux/i386/mmap.c: New file. * sysdeps/unix/sysv/linux/i386/mmap.S: Remove file. * sysdeps/unix/sysv/linux/i386/mmap64.S: Likewise. * sysdeps/unix/sysv/linux/i386/semtimedop.S: Likewise.
2015-10-15 11:33:15 +00:00
Consolidate Linux mmap implementation (BZ#21270) This patch consolidates all Linux mmap implementations on default sysdeps/unix/sysv/linux/mmap{64}.c one. To accomodate all required architecture specific requeriments a new internal header is created (mmap_internal.h) where each architecture add its specific code requirements. Currently only x86_64 (to define MMAP_PREPARE to add MAP_32BITS), s390 (which have a different kernel ABI for mmap), m68k (which have variable minimum page sizes), and MIPS n32 (which zero extend the offset to handle negative one correctly) redefine the new header. The patch also fixes BZ#21270 where default mmap64 on architectures which uses mmap2 silent truncates large offsets value (larger than 1 << (page shift + 8 * sizeof (off_t)) or 1<<44 on architectures with 4096 bytes page size). The new consolidate implementation returns EINVAL as allowed by POSIX. It also adds a tests for on current tst-mmap-offset one. I have run a full make check on x86_64, x86_64-32, i686, aarch64, armhf, powerpc, powerpc64le, sparc64, and sparcv9 without any regressions. I also ran some basic tests (tst-mmap-offset) on sh4, m68k, and on qemu simulated MIPS32 and MIPS64. [BZ #21270] * posix/tst-mmap-offset.c (do_prepare): New function. (do_test): Rename to do_test_bz18877 and use FAIL_RET. (do_test_bz21270): New function. * sysdeps/unix/sysv/linux/aarch64/mmap.c: Remove file. * sysdeps/unix/sysv/linux/arm/mmap.c: Remove file. * sysdeps/unix/sysv/linux/generic/wordsize-32/mmap.c: Likewise. * sysdeps/unix/sysv/linux/hppa/mmap.c: Likewise. * sysdeps/unix/sysv/linux/i386/mmap.c: Likewise. * sysdeps/unix/sysv/linux/m68k/mmap.S: Likewise. * sysdeps/unix/sysv/linux/m68k/mmap64.c: Likewise. * sysdeps/unix/sysv/linux/microblaze/mmap.S: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/mmap.c: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n32/mmap.c: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n64/mmap64.c: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/mmap.S: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/mmap64.S: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/mmap.S: Likewise. * sysdeps/unix/sysv/linux/wordsize-64/mmap.c: Likewise. * sysdeps/unix/sysv/linux/wordsize-64/mmap64.c: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/mmap.c: Likewise. * sysdeps/unix/sysv/linux/mmap_internal.h: New file. * sysdeps/unix/sysv/linux/m68k/mmap_internal.h: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n32/mmap_internal.h: Likewise. * sysdeps/unix/sysv/linux/s390/mmap_internal.h: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/mmap_internal.h: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n64/syscalls.list: Remove mmap from auto-generation list. * sysdeps/unix/sysv/linux/mips/mips64/n32/syscalls.list: Likewise. * sysdeps/unix/sysv/linux/wordsize-64/syscalls.list: Likewise. * sysdeps/unix/sysv/linux/mmap.c: New file. * sysdeps/unix/sysv/linux/mmap64.c (__mmap64): Add check for invalid offsets and support for mmap2 syscall.
2017-04-06 20:01:56 +00:00
/* An architecture may override this. */
# ifndef MMAP_ADJUST_OFFSET
# define MMAP_ADJUST_OFFSET(offset) offset
# endif
void *
__mmap (void *addr, size_t len, int prot, int flags, int fd, off_t offset)
i386: Remove syscall assembly codes with 6 arguments This patch removes i386 assembly implementation for mmap, mmap64, semtimeop now that i386 have 6 argument syscall support from C code and GCC 5 can inline syscalls with 6 arguments. We also compile mmap.c, mmap64.c and semtimedop.c with -fomit-frame-pointer since %ebp may be used to pass the 6th argument to syscall. Fo sysdeps/unix/sysv/linux/i386/mmap.c, with -O2 -march=i686 -mtune=generic, GCC 5.2 now generates: <__mmap>: 0: sub $0x10,%esp 3: mov 0x28(%esp),%eax 7: mov %ebx,(%esp) a: mov 0x18(%esp),%ecx e: mov %esi,0x4(%esp) 12: mov 0x14(%esp),%ebx 16: mov %edi,0x8(%esp) 1a: mov 0x1c(%esp),%edx 1e: test $0xfff,%eax 23: mov 0x20(%esp),%esi 27: mov %ebp,0xc(%esp) 2b: mov 0x24(%esp),%edi 2f: jne 60 <__mmap+0x60> 31: shr $0xc,%eax 34: mov %eax,%ebp 36: mov $0xc0,%eax 3b: call *%gs:0x10 42: cmp $0xfffff000,%eax 47: ja 65 <__mmap+0x65> 49: mov (%esp),%ebx 4c: mov 0x4(%esp),%esi 50: mov 0x8(%esp),%edi 54: mov 0xc(%esp),%ebp 58: add $0x10,%esp 5b: ret 5c: lea 0x0(%esi,%eiz,1),%esi 60: mov $0xffffffea,%eax 65: mov (%esp),%ebx 68: mov 0x4(%esp),%esi 6c: mov 0x8(%esp),%edi 70: mov 0xc(%esp),%ebp 74: add $0x10,%esp 77: jmp 78 <__mmap+0x78> vs sysdeps/unix/sysv/linux/i386/mmap.S: <__mmap>: 0: push %ebp 1: push %ebx 2: push %esi 3: push %edi 4: mov 0x14(%esp),%ebx 8: mov 0x18(%esp),%ecx c: mov 0x1c(%esp),%edx 10: mov 0x20(%esp),%esi 14: mov 0x24(%esp),%edi 18: mov 0x28(%esp),%ebp 1c: test $0xfff,%ebp 22: mov $0xffffffea,%eax 27: jne 38 <__mmap+0x38> 29: shr $0xc,%ebp 2c: mov $0xc0,%eax 31: call *%gs:0x10 38: pop %edi 39: pop %esi 3a: pop %ebx 3b: pop %ebp 3c: cmp $0xfffff000,%eax 41: ja 44 <__mmap+0x44> 43: ret 44: call 45 <__mmap+0x45> 45: R_386_PC32 __x86.get_pc_thunk.cx 49: add $0x2,%ecx 4b: R_386_GOTPC _GLOBAL_OFFSET_TABLE_ 4f: mov 0x0(%ecx),%ecx 51: R_386_TLS_GOTIE __libc_errno 55: neg %eax 57: mov %eax,%gs:(%ecx) 5a: or $0xffffffff,%eax 5d: ret The C version has: 3: mov 0x28(%esp),%eax ... 1e: test $0xfff,%eax ... 31: sar $0xc,%eax 34: mov %eax,%ebp is due to missing $ebx register constraint for inline asm. We have to use "r" constraint with register unsigned int _a6 asm ("ebp") = (unsigned int) (arg6); and compiler chose %eax for offset (arg6) in if (offset & (MMAP_PAGE_UNIT - 1)) * sysdeps/unix/sysv/linux/i386/Makefile (CFLAGS-epoll_pwait.c): Add -fomit-frame-pointer. (CFLAGS-mmap.c): Likewise. (CFLAGS-mmap64.c): Likewise. (CFLAGS-semtimedop.c): Likewise. * sysdeps/unix/sysv/linux/i386/mmap.c: New file. * sysdeps/unix/sysv/linux/i386/mmap.S: Remove file. * sysdeps/unix/sysv/linux/i386/mmap64.S: Likewise. * sysdeps/unix/sysv/linux/i386/semtimedop.S: Likewise.
2015-10-15 11:33:15 +00:00
{
Consolidate Linux mmap implementation (BZ#21270) This patch consolidates all Linux mmap implementations on default sysdeps/unix/sysv/linux/mmap{64}.c one. To accomodate all required architecture specific requeriments a new internal header is created (mmap_internal.h) where each architecture add its specific code requirements. Currently only x86_64 (to define MMAP_PREPARE to add MAP_32BITS), s390 (which have a different kernel ABI for mmap), m68k (which have variable minimum page sizes), and MIPS n32 (which zero extend the offset to handle negative one correctly) redefine the new header. The patch also fixes BZ#21270 where default mmap64 on architectures which uses mmap2 silent truncates large offsets value (larger than 1 << (page shift + 8 * sizeof (off_t)) or 1<<44 on architectures with 4096 bytes page size). The new consolidate implementation returns EINVAL as allowed by POSIX. It also adds a tests for on current tst-mmap-offset one. I have run a full make check on x86_64, x86_64-32, i686, aarch64, armhf, powerpc, powerpc64le, sparc64, and sparcv9 without any regressions. I also ran some basic tests (tst-mmap-offset) on sh4, m68k, and on qemu simulated MIPS32 and MIPS64. [BZ #21270] * posix/tst-mmap-offset.c (do_prepare): New function. (do_test): Rename to do_test_bz18877 and use FAIL_RET. (do_test_bz21270): New function. * sysdeps/unix/sysv/linux/aarch64/mmap.c: Remove file. * sysdeps/unix/sysv/linux/arm/mmap.c: Remove file. * sysdeps/unix/sysv/linux/generic/wordsize-32/mmap.c: Likewise. * sysdeps/unix/sysv/linux/hppa/mmap.c: Likewise. * sysdeps/unix/sysv/linux/i386/mmap.c: Likewise. * sysdeps/unix/sysv/linux/m68k/mmap.S: Likewise. * sysdeps/unix/sysv/linux/m68k/mmap64.c: Likewise. * sysdeps/unix/sysv/linux/microblaze/mmap.S: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/mmap.c: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n32/mmap.c: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n64/mmap64.c: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/mmap.S: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/mmap64.S: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/mmap.S: Likewise. * sysdeps/unix/sysv/linux/wordsize-64/mmap.c: Likewise. * sysdeps/unix/sysv/linux/wordsize-64/mmap64.c: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/mmap.c: Likewise. * sysdeps/unix/sysv/linux/mmap_internal.h: New file. * sysdeps/unix/sysv/linux/m68k/mmap_internal.h: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n32/mmap_internal.h: Likewise. * sysdeps/unix/sysv/linux/s390/mmap_internal.h: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/mmap_internal.h: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n64/syscalls.list: Remove mmap from auto-generation list. * sysdeps/unix/sysv/linux/mips/mips64/n32/syscalls.list: Likewise. * sysdeps/unix/sysv/linux/wordsize-64/syscalls.list: Likewise. * sysdeps/unix/sysv/linux/mmap.c: New file. * sysdeps/unix/sysv/linux/mmap64.c (__mmap64): Add check for invalid offsets and support for mmap2 syscall.
2017-04-06 20:01:56 +00:00
MMAP_CHECK_PAGE_UNIT ();
if (offset & MMAP_OFF_LOW_MASK)
Do not use __ptr_t. sys/cdefs.h has a macro __ptr_t, which a few places in glibc use instead of void *. void * is a well-understood standard type for that purpose and in a post-C89 context there is no need for a macro for it; this patch changes those places to use void * directly instead. Unlike __long_double_t, __ptr_t is widely used outside glibc (or at least has many hits on codesearch.debian.net). I don't know how many of those uses would break if sys/cdefs.h ceased to define the macro, but there's enough risk that this patch leaves the definition and just removes the uses within glibc; removal of the definition can be considered separately if desired. Tested for x86_64, and with build-many-glibcs.py. * malloc/mcheck.c (old_free_hook): Use void * instead of __ptr_t. (old_malloc_hook): Likewise. (old_memalign_hook): Likewise. (old_realloc_hook): Likewise. (struct hdr): Likewise. (flood): Likewise. (freehook): Likewise. (mallochook): Likewise. (memalignhook): Likewise. (reallochook): Likewise. (mprobe): Likewise. * malloc/mtrace.c (mallwatch): Likewise. (tr_old_free_hook): Likewise. (tr_old_malloc_hook): Likewise. (tr_old_realloc_hook): Likewise. (tr_old_memalign_hook): Likewise. (tr_where): Likewise. (lock_and_info): Likewise. (tr_freehook): Likewise. (tr_mallochook): Likewise. (tr_reallochook): Likewise. (tr_memalignhook): Likewise. * misc/err.h [!__GNUC_VA_LIST] (__gnuc_va_list): Likewise. * misc/mmap.c (__mmap): Likewise. * misc/mmap64.c (__mmap64): Likewise. * misc/mprotect.c (__mprotect): Likewise. * misc/msync.c (msync): Likewise. * misc/munmap.c (__munmap): Likewise. * posix/posix_madvise.c (posix_madvise): Likewise. * socket/send.c (__send): Likewise. * socket/sendto.c (__sendto): Likewise. * socket/setsockopt.c (__setsockopt): Likewise. * string/memcmp.c (__ptr_t): Remove macro. (MEMCMP): Use void * instead of ptr_t. * string/memrchr.c (__ptr_t): Remove macro. (__memrchr): Use void * instead of ptr_t. * sysdeps/mach/hurd/dl-sysdep.c (__mmap): Likewise. * sysdeps/mach/hurd/mmap.c (__mmap): Likewise. * sysdeps/mach/hurd/mmap64.c (__mmap64): Likewise. * sysdeps/mach/mprotect.c (__mprotect): Likewise. * sysdeps/mach/msync.c (msync): Likewise. * sysdeps/mach/munmap.c (__munmap): Likewise. * sysdeps/mips/bits/setjmp.h (struct __jmp_buf_internal_tag): Likewise. * sysdeps/posix/getcwd.c (__getcwd): Likewise. * sysdeps/powerpc/powerpc32/memset.S (memset): Likewise. * sysdeps/powerpc/powerpc32/power4/memcpy.S (memcpy): Likewise. * sysdeps/powerpc/powerpc32/power4/memset.S (memset): Likewise. * sysdeps/powerpc/powerpc32/power6/memcpy.S (memcpy): Likewise. * sysdeps/powerpc/powerpc32/power6/memset.S (memset): Likewise. * sysdeps/powerpc/powerpc32/power7/memcpy.S (memcpy): Likewise. * sysdeps/powerpc/powerpc32/power7/mempcpy.S (__mempcpy): Likewise. * sysdeps/powerpc/powerpc32/power7/memset.S (memset): Likewise. * sysdeps/powerpc/powerpc64/memcpy.S (memcpy): Likewise. * sysdeps/powerpc/powerpc64/memset.S (memset): Likewise. * sysdeps/powerpc/powerpc64/power4/memcpy.S (memcpy): Likewise. * sysdeps/powerpc/powerpc64/power4/memset.S (memset): Likewise. * sysdeps/powerpc/powerpc64/power6/memcpy.S (memcpy): Likewise. * sysdeps/powerpc/powerpc64/power6/memset.S (memset): Likewise. * sysdeps/powerpc/powerpc64/power7/memcpy.S (memcpy): Likewise. * sysdeps/powerpc/powerpc64/power7/mempcpy.S (__mempcpy): Likewise. * sysdeps/powerpc/powerpc64/power7/memset.S (memset): Likewise. * sysdeps/powerpc/powerpc64/power8/memset.S (memset): Likewise. * sysdeps/tile/memcmp.c (__ptr_t): Remove macro. (MEMCMP): Use void * instead of ptr_t. * sysdeps/unix/sysv/linux/alpha/oldglob.c (old_glob_t): Likewise. * sysdeps/unix/sysv/linux/mmap.c (__mmap): Likewise.
2017-08-08 17:14:49 +00:00
return (void *) INLINE_SYSCALL_ERROR_RETURN_VALUE (EINVAL);
i386: Remove syscall assembly codes with 6 arguments This patch removes i386 assembly implementation for mmap, mmap64, semtimeop now that i386 have 6 argument syscall support from C code and GCC 5 can inline syscalls with 6 arguments. We also compile mmap.c, mmap64.c and semtimedop.c with -fomit-frame-pointer since %ebp may be used to pass the 6th argument to syscall. Fo sysdeps/unix/sysv/linux/i386/mmap.c, with -O2 -march=i686 -mtune=generic, GCC 5.2 now generates: <__mmap>: 0: sub $0x10,%esp 3: mov 0x28(%esp),%eax 7: mov %ebx,(%esp) a: mov 0x18(%esp),%ecx e: mov %esi,0x4(%esp) 12: mov 0x14(%esp),%ebx 16: mov %edi,0x8(%esp) 1a: mov 0x1c(%esp),%edx 1e: test $0xfff,%eax 23: mov 0x20(%esp),%esi 27: mov %ebp,0xc(%esp) 2b: mov 0x24(%esp),%edi 2f: jne 60 <__mmap+0x60> 31: shr $0xc,%eax 34: mov %eax,%ebp 36: mov $0xc0,%eax 3b: call *%gs:0x10 42: cmp $0xfffff000,%eax 47: ja 65 <__mmap+0x65> 49: mov (%esp),%ebx 4c: mov 0x4(%esp),%esi 50: mov 0x8(%esp),%edi 54: mov 0xc(%esp),%ebp 58: add $0x10,%esp 5b: ret 5c: lea 0x0(%esi,%eiz,1),%esi 60: mov $0xffffffea,%eax 65: mov (%esp),%ebx 68: mov 0x4(%esp),%esi 6c: mov 0x8(%esp),%edi 70: mov 0xc(%esp),%ebp 74: add $0x10,%esp 77: jmp 78 <__mmap+0x78> vs sysdeps/unix/sysv/linux/i386/mmap.S: <__mmap>: 0: push %ebp 1: push %ebx 2: push %esi 3: push %edi 4: mov 0x14(%esp),%ebx 8: mov 0x18(%esp),%ecx c: mov 0x1c(%esp),%edx 10: mov 0x20(%esp),%esi 14: mov 0x24(%esp),%edi 18: mov 0x28(%esp),%ebp 1c: test $0xfff,%ebp 22: mov $0xffffffea,%eax 27: jne 38 <__mmap+0x38> 29: shr $0xc,%ebp 2c: mov $0xc0,%eax 31: call *%gs:0x10 38: pop %edi 39: pop %esi 3a: pop %ebx 3b: pop %ebp 3c: cmp $0xfffff000,%eax 41: ja 44 <__mmap+0x44> 43: ret 44: call 45 <__mmap+0x45> 45: R_386_PC32 __x86.get_pc_thunk.cx 49: add $0x2,%ecx 4b: R_386_GOTPC _GLOBAL_OFFSET_TABLE_ 4f: mov 0x0(%ecx),%ecx 51: R_386_TLS_GOTIE __libc_errno 55: neg %eax 57: mov %eax,%gs:(%ecx) 5a: or $0xffffffff,%eax 5d: ret The C version has: 3: mov 0x28(%esp),%eax ... 1e: test $0xfff,%eax ... 31: sar $0xc,%eax 34: mov %eax,%ebp is due to missing $ebx register constraint for inline asm. We have to use "r" constraint with register unsigned int _a6 asm ("ebp") = (unsigned int) (arg6); and compiler chose %eax for offset (arg6) in if (offset & (MMAP_PAGE_UNIT - 1)) * sysdeps/unix/sysv/linux/i386/Makefile (CFLAGS-epoll_pwait.c): Add -fomit-frame-pointer. (CFLAGS-mmap.c): Likewise. (CFLAGS-mmap64.c): Likewise. (CFLAGS-semtimedop.c): Likewise. * sysdeps/unix/sysv/linux/i386/mmap.c: New file. * sysdeps/unix/sysv/linux/i386/mmap.S: Remove file. * sysdeps/unix/sysv/linux/i386/mmap64.S: Likewise. * sysdeps/unix/sysv/linux/i386/semtimedop.S: Likewise.
2015-10-15 11:33:15 +00:00
Consolidate Linux mmap implementation (BZ#21270) This patch consolidates all Linux mmap implementations on default sysdeps/unix/sysv/linux/mmap{64}.c one. To accomodate all required architecture specific requeriments a new internal header is created (mmap_internal.h) where each architecture add its specific code requirements. Currently only x86_64 (to define MMAP_PREPARE to add MAP_32BITS), s390 (which have a different kernel ABI for mmap), m68k (which have variable minimum page sizes), and MIPS n32 (which zero extend the offset to handle negative one correctly) redefine the new header. The patch also fixes BZ#21270 where default mmap64 on architectures which uses mmap2 silent truncates large offsets value (larger than 1 << (page shift + 8 * sizeof (off_t)) or 1<<44 on architectures with 4096 bytes page size). The new consolidate implementation returns EINVAL as allowed by POSIX. It also adds a tests for on current tst-mmap-offset one. I have run a full make check on x86_64, x86_64-32, i686, aarch64, armhf, powerpc, powerpc64le, sparc64, and sparcv9 without any regressions. I also ran some basic tests (tst-mmap-offset) on sh4, m68k, and on qemu simulated MIPS32 and MIPS64. [BZ #21270] * posix/tst-mmap-offset.c (do_prepare): New function. (do_test): Rename to do_test_bz18877 and use FAIL_RET. (do_test_bz21270): New function. * sysdeps/unix/sysv/linux/aarch64/mmap.c: Remove file. * sysdeps/unix/sysv/linux/arm/mmap.c: Remove file. * sysdeps/unix/sysv/linux/generic/wordsize-32/mmap.c: Likewise. * sysdeps/unix/sysv/linux/hppa/mmap.c: Likewise. * sysdeps/unix/sysv/linux/i386/mmap.c: Likewise. * sysdeps/unix/sysv/linux/m68k/mmap.S: Likewise. * sysdeps/unix/sysv/linux/m68k/mmap64.c: Likewise. * sysdeps/unix/sysv/linux/microblaze/mmap.S: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/mmap.c: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n32/mmap.c: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n64/mmap64.c: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/mmap.S: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/mmap64.S: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/mmap.S: Likewise. * sysdeps/unix/sysv/linux/wordsize-64/mmap.c: Likewise. * sysdeps/unix/sysv/linux/wordsize-64/mmap64.c: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/mmap.c: Likewise. * sysdeps/unix/sysv/linux/mmap_internal.h: New file. * sysdeps/unix/sysv/linux/m68k/mmap_internal.h: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n32/mmap_internal.h: Likewise. * sysdeps/unix/sysv/linux/s390/mmap_internal.h: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/mmap_internal.h: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n64/syscalls.list: Remove mmap from auto-generation list. * sysdeps/unix/sysv/linux/mips/mips64/n32/syscalls.list: Likewise. * sysdeps/unix/sysv/linux/wordsize-64/syscalls.list: Likewise. * sysdeps/unix/sysv/linux/mmap.c: New file. * sysdeps/unix/sysv/linux/mmap64.c (__mmap64): Add check for invalid offsets and support for mmap2 syscall.
2017-04-06 20:01:56 +00:00
#ifdef __NR_mmap2
return (void *) MMAP_CALL (mmap2, addr, len, prot, flags, fd,
offset / (uint32_t) MMAP2_PAGE_UNIT);
#else
return (void *) MMAP_CALL (mmap, addr, len, prot, flags, fd,
MMAP_ADJUST_OFFSET (offset));
#endif
}
i386: Remove syscall assembly codes with 6 arguments This patch removes i386 assembly implementation for mmap, mmap64, semtimeop now that i386 have 6 argument syscall support from C code and GCC 5 can inline syscalls with 6 arguments. We also compile mmap.c, mmap64.c and semtimedop.c with -fomit-frame-pointer since %ebp may be used to pass the 6th argument to syscall. Fo sysdeps/unix/sysv/linux/i386/mmap.c, with -O2 -march=i686 -mtune=generic, GCC 5.2 now generates: <__mmap>: 0: sub $0x10,%esp 3: mov 0x28(%esp),%eax 7: mov %ebx,(%esp) a: mov 0x18(%esp),%ecx e: mov %esi,0x4(%esp) 12: mov 0x14(%esp),%ebx 16: mov %edi,0x8(%esp) 1a: mov 0x1c(%esp),%edx 1e: test $0xfff,%eax 23: mov 0x20(%esp),%esi 27: mov %ebp,0xc(%esp) 2b: mov 0x24(%esp),%edi 2f: jne 60 <__mmap+0x60> 31: shr $0xc,%eax 34: mov %eax,%ebp 36: mov $0xc0,%eax 3b: call *%gs:0x10 42: cmp $0xfffff000,%eax 47: ja 65 <__mmap+0x65> 49: mov (%esp),%ebx 4c: mov 0x4(%esp),%esi 50: mov 0x8(%esp),%edi 54: mov 0xc(%esp),%ebp 58: add $0x10,%esp 5b: ret 5c: lea 0x0(%esi,%eiz,1),%esi 60: mov $0xffffffea,%eax 65: mov (%esp),%ebx 68: mov 0x4(%esp),%esi 6c: mov 0x8(%esp),%edi 70: mov 0xc(%esp),%ebp 74: add $0x10,%esp 77: jmp 78 <__mmap+0x78> vs sysdeps/unix/sysv/linux/i386/mmap.S: <__mmap>: 0: push %ebp 1: push %ebx 2: push %esi 3: push %edi 4: mov 0x14(%esp),%ebx 8: mov 0x18(%esp),%ecx c: mov 0x1c(%esp),%edx 10: mov 0x20(%esp),%esi 14: mov 0x24(%esp),%edi 18: mov 0x28(%esp),%ebp 1c: test $0xfff,%ebp 22: mov $0xffffffea,%eax 27: jne 38 <__mmap+0x38> 29: shr $0xc,%ebp 2c: mov $0xc0,%eax 31: call *%gs:0x10 38: pop %edi 39: pop %esi 3a: pop %ebx 3b: pop %ebp 3c: cmp $0xfffff000,%eax 41: ja 44 <__mmap+0x44> 43: ret 44: call 45 <__mmap+0x45> 45: R_386_PC32 __x86.get_pc_thunk.cx 49: add $0x2,%ecx 4b: R_386_GOTPC _GLOBAL_OFFSET_TABLE_ 4f: mov 0x0(%ecx),%ecx 51: R_386_TLS_GOTIE __libc_errno 55: neg %eax 57: mov %eax,%gs:(%ecx) 5a: or $0xffffffff,%eax 5d: ret The C version has: 3: mov 0x28(%esp),%eax ... 1e: test $0xfff,%eax ... 31: sar $0xc,%eax 34: mov %eax,%ebp is due to missing $ebx register constraint for inline asm. We have to use "r" constraint with register unsigned int _a6 asm ("ebp") = (unsigned int) (arg6); and compiler chose %eax for offset (arg6) in if (offset & (MMAP_PAGE_UNIT - 1)) * sysdeps/unix/sysv/linux/i386/Makefile (CFLAGS-epoll_pwait.c): Add -fomit-frame-pointer. (CFLAGS-mmap.c): Likewise. (CFLAGS-mmap64.c): Likewise. (CFLAGS-semtimedop.c): Likewise. * sysdeps/unix/sysv/linux/i386/mmap.c: New file. * sysdeps/unix/sysv/linux/i386/mmap.S: Remove file. * sysdeps/unix/sysv/linux/i386/mmap64.S: Likewise. * sysdeps/unix/sysv/linux/i386/semtimedop.S: Likewise.
2015-10-15 11:33:15 +00:00
weak_alias (__mmap, mmap)
Clean pthread functions namespaces for C11 threads This patch adds internal definition (through {libc_}hidden_{proto,def}) and also change some strong to weak alias for symbols that might be used by C11 threads implementations. The patchset should not change libc/libpthread functional, although object changes are expected (since now internal symbols are used instead) and final exported symbols through GLIBC_PRIVATE is also expanded (to cover libpthread usage of __mmap{64}, __munmap, __mprotect). Checked with a build for all major ABI (aarch64-linux-gnu, alpha-linux-gnu, arm-linux-gnueabi, i386-linux-gnu, ia64-linux-gnu, m68k-linux-gnu, microblaze-linux-gnu [1], mips{64}-linux-gnu, nios2-linux-gnu, powerpc{64le}-linux-gnu, s390{x}-linux-gnu, sparc{64}-linux-gnu, tile{pro,gx}-linux-gnu, and x86_64-linux-gnu). * include/sched.h (__sched_get_priority_max): Add libc hidden proto. (__sched_get_prioriry_min): Likewise. * include/sys/mman.h (__mmap): Likewise. (__mmap64): Likewise. (__munmap): Likewise. (__mprotect): Likewise. * include/termios.h (__tcsetattr): Likewise. * include/time.h (__nanosleep): Use hidden_proto instead of libc_hidden_proto. * posix/nanosleep.c (__nanosleep): Likewise. * misc/Versions (libc): Export __mmap, __munmap, __mprotect, __sched_get_priority_min, and __sched_get_priority_max under GLIBC_PRIVATE. * nptl/allocatestack.c (__free_stacks): Use internal definition for libc symbols. (change_stack_perm): Likewise. (allocate_stack): Likewise. * sysdeps/posix/gethostname.c: Likewise. * nptl/tpp.c (__init_sched_fifo_prio): Likewise. * sysdeps/unix/sysv/linux/i386/smp.h (is_smp_system): Likewise. * sysdeps/unix/sysv/linux/powerpc/ioctl.c (__ioctl): Likewise. * nptl/pthreadP.h (__pthread_mutex_timedlock): Add definition. (__pthread_key_delete): Likewise. (__pthread_detach): Likewise. (__pthread_cancel): Likewise. (__pthread_mutex_trylock): Likewise. (__pthread_mutexattr_init): Likewise. (__pthread_mutexattr_settype): Likewise. * nptl/pthread_cancel.c (pthread_cancel): Change to internal name and create alias for exported one. * nptl/pthread_join.c (pthread_join): Likewise. * nptl/pthread_detach.c (pthread_detach): Likewise. * nptl/pthread_key_delete.c (pthread_key_delete): Likewise. * nptl/pthread_mutex_timedlock.c (pthread_mutex_timedlock): Likewise. * nptl/pthread_create.c: Change static requirements for pthread symbols. * nptl/pthread_equal.c (__pthread_equal): Change strong alias to weak for internal definition. * nptl/pthread_exit.c (__pthread_exit): Likewise. * nptl/pthread_getspecific.c (__pthread_getspecific): Likewise. * nptl/pthread_key_create.c (__pthread_key_create): Likewise. * nptl/pthread_mutex_destroy.c (__pthread_mutex_destroy): Likewise. * nptl/pthread_mutex_init.c (__pthread_mutex_init): Likewise. * nptl/pthread_mutex_lock.c (__pthread_mutex_lock): Likewise. * nptl/pthread_mutex_trylock.c (__pthread_mutex_trylock): Likewise. * nptl/pthread_mutex_unlock.c (__pthread_mutex_unlock): Likewise. * nptl/pthread_mutexattr_init.c (__pthread_mutexattr_init): Likwise. * nptl/pthread_mutexattr_settype.c (__pthread_mutexattr_settype): Likewise. * nptl/pthread_self.c (__pthread_self): Likewise. * nptl/pthread_setspecific.c (__pthread_setspecific): Likewise. * sysdeps/unix/sysv/linux/tcsetattr.c (tcsetattr): Likewise. * misc/mmap.c (__mmap): Add internal symbol definition. * misc/mmap.c (__mmap64): Likewise. * sysdeps/unix/sysv/linux/mmap.c (__mmap): Likewise. * sysdeps/unix/sysv/linux/mmap64.c (__mmap): Likewise. (__mmap64): Likewise. * sysdeps/unix/sysv/linux/i386/Versions (libc) [GLIBC_PRIVATE): Add __uname.
2016-12-02 18:32:28 +00:00
libc_hidden_def (__mmap)
Consolidate Linux mmap implementation (BZ#21270) This patch consolidates all Linux mmap implementations on default sysdeps/unix/sysv/linux/mmap{64}.c one. To accomodate all required architecture specific requeriments a new internal header is created (mmap_internal.h) where each architecture add its specific code requirements. Currently only x86_64 (to define MMAP_PREPARE to add MAP_32BITS), s390 (which have a different kernel ABI for mmap), m68k (which have variable minimum page sizes), and MIPS n32 (which zero extend the offset to handle negative one correctly) redefine the new header. The patch also fixes BZ#21270 where default mmap64 on architectures which uses mmap2 silent truncates large offsets value (larger than 1 << (page shift + 8 * sizeof (off_t)) or 1<<44 on architectures with 4096 bytes page size). The new consolidate implementation returns EINVAL as allowed by POSIX. It also adds a tests for on current tst-mmap-offset one. I have run a full make check on x86_64, x86_64-32, i686, aarch64, armhf, powerpc, powerpc64le, sparc64, and sparcv9 without any regressions. I also ran some basic tests (tst-mmap-offset) on sh4, m68k, and on qemu simulated MIPS32 and MIPS64. [BZ #21270] * posix/tst-mmap-offset.c (do_prepare): New function. (do_test): Rename to do_test_bz18877 and use FAIL_RET. (do_test_bz21270): New function. * sysdeps/unix/sysv/linux/aarch64/mmap.c: Remove file. * sysdeps/unix/sysv/linux/arm/mmap.c: Remove file. * sysdeps/unix/sysv/linux/generic/wordsize-32/mmap.c: Likewise. * sysdeps/unix/sysv/linux/hppa/mmap.c: Likewise. * sysdeps/unix/sysv/linux/i386/mmap.c: Likewise. * sysdeps/unix/sysv/linux/m68k/mmap.S: Likewise. * sysdeps/unix/sysv/linux/m68k/mmap64.c: Likewise. * sysdeps/unix/sysv/linux/microblaze/mmap.S: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/mmap.c: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n32/mmap.c: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n64/mmap64.c: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/mmap.S: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/mmap64.S: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/mmap.S: Likewise. * sysdeps/unix/sysv/linux/wordsize-64/mmap.c: Likewise. * sysdeps/unix/sysv/linux/wordsize-64/mmap64.c: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/mmap.c: Likewise. * sysdeps/unix/sysv/linux/mmap_internal.h: New file. * sysdeps/unix/sysv/linux/m68k/mmap_internal.h: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n32/mmap_internal.h: Likewise. * sysdeps/unix/sysv/linux/s390/mmap_internal.h: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/mmap_internal.h: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n64/syscalls.list: Remove mmap from auto-generation list. * sysdeps/unix/sysv/linux/mips/mips64/n32/syscalls.list: Likewise. * sysdeps/unix/sysv/linux/wordsize-64/syscalls.list: Likewise. * sysdeps/unix/sysv/linux/mmap.c: New file. * sysdeps/unix/sysv/linux/mmap64.c (__mmap64): Add check for invalid offsets and support for mmap2 syscall.
2017-04-06 20:01:56 +00:00
#endif /* __OFF_T_MATCHES_OFF64_T */