glibc/nptl/tst-cancel15.c

139 lines
2.9 KiB
C
Raw Normal View History

nptl: Fix sem_wait and sem_timedwait cancellation (BZ#18243) This patch fixes both sem_wait and sem_timedwait cancellation point for uncontended case. In this scenario only atomics are involved and thus the futex cancellable call is not issue and a pending cancellation signal is not handled. The fix is straighforward by calling pthread_testcancel is both function start. Although it would be simpler to call CANCELLATION_P directly, I decided to add an internal pthread_testcancel alias and use it to export less internal implementation on such function. A possible change on how pthread_testcancel is internally implemented would lead to either continue to force use CANCELLATION_P or to adjust its every use. GLIBC testcase also does have tests for uncontended cases, test-cancel12 and test-cancel14.c, however both are flawed by adding another cancellation point just after thread pthread_cleanup_pop: 47 static void * 48 tf (void *arg) 49 { 50 pthread_cleanup_push (cleanup, NULL); 51 52 int e = pthread_barrier_wait (&bar); 53 if (e != 0 && e != PTHREAD_BARRIER_SERIAL_THREAD) 54 { 55 puts ("tf: 1st barrier_wait failed"); 56 exit (1); 57 } 58 59 /* This call should block and be cancelable. */ 60 sem_wait (&sem); 61 62 pthread_cleanup_pop (0); 63 64 puts ("sem_wait returned"); 65 66 return NULL; 67 } So sem_{timed}wait does not act on cancellation, pthread_cleanup_pop executes 'cleanup' and then 'puts' acts on cancellation. Since pthread_cleanup_pop removed the clean-up handler, it will ran only once and thus it won't accuse an error to indicate sem_wait has not acted on the cancellation signal. This patch also fixes this behavior by removing the cancellation point 'puts'. It also adds some cleanup on all sem_{timed}wait cancel tests. It partially fixes BZ #18243. Checked on x86_64. [BZ #18243] * nptl/pthreadP.h (__pthread_testcancel): Add prototype and hidden_proto. * nptl/pthread_testcancel.c (pthread_cancel): Add internal aliais definition. * nptl/sem_timedwait.c (sem_timedwait): Add cancellation check for uncontended case. * nptl/sem_wait.c (__new_sem_wait): Likewise. * nptl/tst-cancel12.c (cleanup): Remove wrong cancellation point. (tf): Fix check for uncontended case. (do_test): Likewise. * nptl/tst-cancel13.c (cleanup): Remove wrong cancellation point. (tf): Fix check for uncontended case. (do_test): Likewise. * nptl/tst-cancel14.c (cleanup): Remove wrong cancellation point. (tf): Fix check for uncontended case. (do_test): Likewise. * nptl/tst-cancel15.c (cleanup): Remove wrong cancellation point. (tf): Fix check for uncontended case. (do_test): Likewise.
2016-08-22 12:39:46 +00:00
/* Test sem_timedwait cancellation for contended case.
Copyright (C) 2003-2017 Free Software Foundation, Inc.
Update. 2003-06-07 Ulrich Drepper <drepper@redhat.com> * cleanup_routine.c: New file. * Versions (libpthread) [GLIBC_2.3.3]: Add __pthread_cleanup_routine. * sysdeps/pthread/pthread.h: Add support for fully exception-based cleanup handling. * Makefile (libpthread-routines): Add cleanup_routine. Add more CFLAGS variables to compile with exceptions. Add comments why which file needs unwind tables. (tests) [have-forced-unwind==yes]: Add tst-cancelx* and tst-cleanupx* tests. * tst-cancelx1.c: New file. * tst-cancelx2.c: New file. * tst-cancelx3.c: New file. * tst-cancelx4.c: New file. * tst-cancelx5.c: New file. * tst-cancelx6.c: New file. * tst-cancelx7.c: New file. * tst-cancelx8.c: New file. * tst-cancelx9.c: New file. * tst-cancelx10.c: New file. * tst-cancelx11.c: New file. * tst-cancelx12.c: New file. * tst-cancelx13.c: New file. * tst-cancelx14.c: New file. * tst-cancelx15.c: New file. * tst-cleanupx0.c: New file. * tst-cleanupx0.expect: New file. * tst-cleanupx1.c: New file. * tst-cleanupx2.c: New file. * tst-cleanupx3.c: New file. * tst-cleanup0.c: Make standard compliant. * tst-cleanup1.c: Likewise. * sysdeps/unix/sysv/linux/sem_timedwait.c: Add cancellation support. * sysdeps/unix/sysv/linux/sem_wait.c: Likewise. * sysdeps/unix/sysv/linux/i386/i486/sem_timedwait.S: Likewise. * sysdeps/unix/sysv/linux/i386/i486/sem_wait.S: Likewise. * sysdeps/unix/sysv/linux/x86_64/sem_timedwait.S: Likewise. * sysdeps/unix/sysv/linux/x86_64/sem_wait.S: Likewise. * sysdeps/i386/tcb-offsets.sym: Add RESULT, CANCELHANDLING, and CLEANUP_JMP_BUF. * sysdeps/x86_64/tcb-offsets.sym: Likewise. * tst-cancel12.c: New file. * tst-cancel13.c: New file. * tst-cancel14.c: New file. * tst-cancel15.c: New file. * Makefile (tests): Add tst-cancel12, tst-cancel13, tst-cancel14, and tst-cancel15. * tst-cancel1.c: Add some comments. * sysdeps/unix/sysv/linux/x86_64/sem_timedwait.S: Compute relative timeout correctly.
2003-06-08 05:28:14 +00:00
This file is part of the GNU C Library.
Contributed by Ulrich Drepper <drepper@redhat.com>, 2003.
The GNU C Library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version.
The GNU C Library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public
License along with the GNU C Library; if not, see
<http://www.gnu.org/licenses/>. */
Update. 2003-06-07 Ulrich Drepper <drepper@redhat.com> * cleanup_routine.c: New file. * Versions (libpthread) [GLIBC_2.3.3]: Add __pthread_cleanup_routine. * sysdeps/pthread/pthread.h: Add support for fully exception-based cleanup handling. * Makefile (libpthread-routines): Add cleanup_routine. Add more CFLAGS variables to compile with exceptions. Add comments why which file needs unwind tables. (tests) [have-forced-unwind==yes]: Add tst-cancelx* and tst-cleanupx* tests. * tst-cancelx1.c: New file. * tst-cancelx2.c: New file. * tst-cancelx3.c: New file. * tst-cancelx4.c: New file. * tst-cancelx5.c: New file. * tst-cancelx6.c: New file. * tst-cancelx7.c: New file. * tst-cancelx8.c: New file. * tst-cancelx9.c: New file. * tst-cancelx10.c: New file. * tst-cancelx11.c: New file. * tst-cancelx12.c: New file. * tst-cancelx13.c: New file. * tst-cancelx14.c: New file. * tst-cancelx15.c: New file. * tst-cleanupx0.c: New file. * tst-cleanupx0.expect: New file. * tst-cleanupx1.c: New file. * tst-cleanupx2.c: New file. * tst-cleanupx3.c: New file. * tst-cleanup0.c: Make standard compliant. * tst-cleanup1.c: Likewise. * sysdeps/unix/sysv/linux/sem_timedwait.c: Add cancellation support. * sysdeps/unix/sysv/linux/sem_wait.c: Likewise. * sysdeps/unix/sysv/linux/i386/i486/sem_timedwait.S: Likewise. * sysdeps/unix/sysv/linux/i386/i486/sem_wait.S: Likewise. * sysdeps/unix/sysv/linux/x86_64/sem_timedwait.S: Likewise. * sysdeps/unix/sysv/linux/x86_64/sem_wait.S: Likewise. * sysdeps/i386/tcb-offsets.sym: Add RESULT, CANCELHANDLING, and CLEANUP_JMP_BUF. * sysdeps/x86_64/tcb-offsets.sym: Likewise. * tst-cancel12.c: New file. * tst-cancel13.c: New file. * tst-cancel14.c: New file. * tst-cancel15.c: New file. * Makefile (tests): Add tst-cancel12, tst-cancel13, tst-cancel14, and tst-cancel15. * tst-cancel1.c: Add some comments. * sysdeps/unix/sysv/linux/x86_64/sem_timedwait.S: Compute relative timeout correctly.
2003-06-08 05:28:14 +00:00
#include <errno.h>
#include <pthread.h>
#include <semaphore.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
#include <sys/time.h>
Update. 2003-06-07 Ulrich Drepper <drepper@redhat.com> * cleanup_routine.c: New file. * Versions (libpthread) [GLIBC_2.3.3]: Add __pthread_cleanup_routine. * sysdeps/pthread/pthread.h: Add support for fully exception-based cleanup handling. * Makefile (libpthread-routines): Add cleanup_routine. Add more CFLAGS variables to compile with exceptions. Add comments why which file needs unwind tables. (tests) [have-forced-unwind==yes]: Add tst-cancelx* and tst-cleanupx* tests. * tst-cancelx1.c: New file. * tst-cancelx2.c: New file. * tst-cancelx3.c: New file. * tst-cancelx4.c: New file. * tst-cancelx5.c: New file. * tst-cancelx6.c: New file. * tst-cancelx7.c: New file. * tst-cancelx8.c: New file. * tst-cancelx9.c: New file. * tst-cancelx10.c: New file. * tst-cancelx11.c: New file. * tst-cancelx12.c: New file. * tst-cancelx13.c: New file. * tst-cancelx14.c: New file. * tst-cancelx15.c: New file. * tst-cleanupx0.c: New file. * tst-cleanupx0.expect: New file. * tst-cleanupx1.c: New file. * tst-cleanupx2.c: New file. * tst-cleanupx3.c: New file. * tst-cleanup0.c: Make standard compliant. * tst-cleanup1.c: Likewise. * sysdeps/unix/sysv/linux/sem_timedwait.c: Add cancellation support. * sysdeps/unix/sysv/linux/sem_wait.c: Likewise. * sysdeps/unix/sysv/linux/i386/i486/sem_timedwait.S: Likewise. * sysdeps/unix/sysv/linux/i386/i486/sem_wait.S: Likewise. * sysdeps/unix/sysv/linux/x86_64/sem_timedwait.S: Likewise. * sysdeps/unix/sysv/linux/x86_64/sem_wait.S: Likewise. * sysdeps/i386/tcb-offsets.sym: Add RESULT, CANCELHANDLING, and CLEANUP_JMP_BUF. * sysdeps/x86_64/tcb-offsets.sym: Likewise. * tst-cancel12.c: New file. * tst-cancel13.c: New file. * tst-cancel14.c: New file. * tst-cancel15.c: New file. * Makefile (tests): Add tst-cancel12, tst-cancel13, tst-cancel14, and tst-cancel15. * tst-cancel1.c: Add some comments. * sysdeps/unix/sysv/linux/x86_64/sem_timedwait.S: Compute relative timeout correctly.
2003-06-08 05:28:14 +00:00
static pthread_barrier_t bar;
static sem_t sem;
static void
cleanup (void *arg)
{
static int ncall;
if (++ncall != 1)
{
puts ("second call to cleanup");
exit (1);
}
}
static void *
tf (void *arg)
{
int e;
pthread_cleanup_push (cleanup, NULL);
e = pthread_barrier_wait (&bar);
if (e != 0 && e != PTHREAD_BARRIER_SERIAL_THREAD)
{
nptl: Fix sem_wait and sem_timedwait cancellation (BZ#18243) This patch fixes both sem_wait and sem_timedwait cancellation point for uncontended case. In this scenario only atomics are involved and thus the futex cancellable call is not issue and a pending cancellation signal is not handled. The fix is straighforward by calling pthread_testcancel is both function start. Although it would be simpler to call CANCELLATION_P directly, I decided to add an internal pthread_testcancel alias and use it to export less internal implementation on such function. A possible change on how pthread_testcancel is internally implemented would lead to either continue to force use CANCELLATION_P or to adjust its every use. GLIBC testcase also does have tests for uncontended cases, test-cancel12 and test-cancel14.c, however both are flawed by adding another cancellation point just after thread pthread_cleanup_pop: 47 static void * 48 tf (void *arg) 49 { 50 pthread_cleanup_push (cleanup, NULL); 51 52 int e = pthread_barrier_wait (&bar); 53 if (e != 0 && e != PTHREAD_BARRIER_SERIAL_THREAD) 54 { 55 puts ("tf: 1st barrier_wait failed"); 56 exit (1); 57 } 58 59 /* This call should block and be cancelable. */ 60 sem_wait (&sem); 61 62 pthread_cleanup_pop (0); 63 64 puts ("sem_wait returned"); 65 66 return NULL; 67 } So sem_{timed}wait does not act on cancellation, pthread_cleanup_pop executes 'cleanup' and then 'puts' acts on cancellation. Since pthread_cleanup_pop removed the clean-up handler, it will ran only once and thus it won't accuse an error to indicate sem_wait has not acted on the cancellation signal. This patch also fixes this behavior by removing the cancellation point 'puts'. It also adds some cleanup on all sem_{timed}wait cancel tests. It partially fixes BZ #18243. Checked on x86_64. [BZ #18243] * nptl/pthreadP.h (__pthread_testcancel): Add prototype and hidden_proto. * nptl/pthread_testcancel.c (pthread_cancel): Add internal aliais definition. * nptl/sem_timedwait.c (sem_timedwait): Add cancellation check for uncontended case. * nptl/sem_wait.c (__new_sem_wait): Likewise. * nptl/tst-cancel12.c (cleanup): Remove wrong cancellation point. (tf): Fix check for uncontended case. (do_test): Likewise. * nptl/tst-cancel13.c (cleanup): Remove wrong cancellation point. (tf): Fix check for uncontended case. (do_test): Likewise. * nptl/tst-cancel14.c (cleanup): Remove wrong cancellation point. (tf): Fix check for uncontended case. (do_test): Likewise. * nptl/tst-cancel15.c (cleanup): Remove wrong cancellation point. (tf): Fix check for uncontended case. (do_test): Likewise.
2016-08-22 12:39:46 +00:00
puts ("error: tf: 1st barrier_wait failed");
Update. 2003-06-07 Ulrich Drepper <drepper@redhat.com> * cleanup_routine.c: New file. * Versions (libpthread) [GLIBC_2.3.3]: Add __pthread_cleanup_routine. * sysdeps/pthread/pthread.h: Add support for fully exception-based cleanup handling. * Makefile (libpthread-routines): Add cleanup_routine. Add more CFLAGS variables to compile with exceptions. Add comments why which file needs unwind tables. (tests) [have-forced-unwind==yes]: Add tst-cancelx* and tst-cleanupx* tests. * tst-cancelx1.c: New file. * tst-cancelx2.c: New file. * tst-cancelx3.c: New file. * tst-cancelx4.c: New file. * tst-cancelx5.c: New file. * tst-cancelx6.c: New file. * tst-cancelx7.c: New file. * tst-cancelx8.c: New file. * tst-cancelx9.c: New file. * tst-cancelx10.c: New file. * tst-cancelx11.c: New file. * tst-cancelx12.c: New file. * tst-cancelx13.c: New file. * tst-cancelx14.c: New file. * tst-cancelx15.c: New file. * tst-cleanupx0.c: New file. * tst-cleanupx0.expect: New file. * tst-cleanupx1.c: New file. * tst-cleanupx2.c: New file. * tst-cleanupx3.c: New file. * tst-cleanup0.c: Make standard compliant. * tst-cleanup1.c: Likewise. * sysdeps/unix/sysv/linux/sem_timedwait.c: Add cancellation support. * sysdeps/unix/sysv/linux/sem_wait.c: Likewise. * sysdeps/unix/sysv/linux/i386/i486/sem_timedwait.S: Likewise. * sysdeps/unix/sysv/linux/i386/i486/sem_wait.S: Likewise. * sysdeps/unix/sysv/linux/x86_64/sem_timedwait.S: Likewise. * sysdeps/unix/sysv/linux/x86_64/sem_wait.S: Likewise. * sysdeps/i386/tcb-offsets.sym: Add RESULT, CANCELHANDLING, and CLEANUP_JMP_BUF. * sysdeps/x86_64/tcb-offsets.sym: Likewise. * tst-cancel12.c: New file. * tst-cancel13.c: New file. * tst-cancel14.c: New file. * tst-cancel15.c: New file. * Makefile (tests): Add tst-cancel12, tst-cancel13, tst-cancel14, and tst-cancel15. * tst-cancel1.c: Add some comments. * sysdeps/unix/sysv/linux/x86_64/sem_timedwait.S: Compute relative timeout correctly.
2003-06-08 05:28:14 +00:00
exit (1);
}
struct timeval tv;
(void) gettimeofday (&tv, NULL);
struct timespec ts;
TIMEVAL_TO_TIMESPEC (&tv, &ts);
/* Timeout in 5 seconds. */
ts.tv_sec += 5;
/* This call should block and be cancelable. */
errno = 0;
e = sem_timedwait (&sem, &ts);
pthread_cleanup_pop (0);
return NULL;
}
static int
do_test (void)
{
pthread_t th;
if (pthread_barrier_init (&bar, NULL, 2) != 0)
{
nptl: Fix sem_wait and sem_timedwait cancellation (BZ#18243) This patch fixes both sem_wait and sem_timedwait cancellation point for uncontended case. In this scenario only atomics are involved and thus the futex cancellable call is not issue and a pending cancellation signal is not handled. The fix is straighforward by calling pthread_testcancel is both function start. Although it would be simpler to call CANCELLATION_P directly, I decided to add an internal pthread_testcancel alias and use it to export less internal implementation on such function. A possible change on how pthread_testcancel is internally implemented would lead to either continue to force use CANCELLATION_P or to adjust its every use. GLIBC testcase also does have tests for uncontended cases, test-cancel12 and test-cancel14.c, however both are flawed by adding another cancellation point just after thread pthread_cleanup_pop: 47 static void * 48 tf (void *arg) 49 { 50 pthread_cleanup_push (cleanup, NULL); 51 52 int e = pthread_barrier_wait (&bar); 53 if (e != 0 && e != PTHREAD_BARRIER_SERIAL_THREAD) 54 { 55 puts ("tf: 1st barrier_wait failed"); 56 exit (1); 57 } 58 59 /* This call should block and be cancelable. */ 60 sem_wait (&sem); 61 62 pthread_cleanup_pop (0); 63 64 puts ("sem_wait returned"); 65 66 return NULL; 67 } So sem_{timed}wait does not act on cancellation, pthread_cleanup_pop executes 'cleanup' and then 'puts' acts on cancellation. Since pthread_cleanup_pop removed the clean-up handler, it will ran only once and thus it won't accuse an error to indicate sem_wait has not acted on the cancellation signal. This patch also fixes this behavior by removing the cancellation point 'puts'. It also adds some cleanup on all sem_{timed}wait cancel tests. It partially fixes BZ #18243. Checked on x86_64. [BZ #18243] * nptl/pthreadP.h (__pthread_testcancel): Add prototype and hidden_proto. * nptl/pthread_testcancel.c (pthread_cancel): Add internal aliais definition. * nptl/sem_timedwait.c (sem_timedwait): Add cancellation check for uncontended case. * nptl/sem_wait.c (__new_sem_wait): Likewise. * nptl/tst-cancel12.c (cleanup): Remove wrong cancellation point. (tf): Fix check for uncontended case. (do_test): Likewise. * nptl/tst-cancel13.c (cleanup): Remove wrong cancellation point. (tf): Fix check for uncontended case. (do_test): Likewise. * nptl/tst-cancel14.c (cleanup): Remove wrong cancellation point. (tf): Fix check for uncontended case. (do_test): Likewise. * nptl/tst-cancel15.c (cleanup): Remove wrong cancellation point. (tf): Fix check for uncontended case. (do_test): Likewise.
2016-08-22 12:39:46 +00:00
puts ("error: barrier_init failed");
Update. 2003-06-07 Ulrich Drepper <drepper@redhat.com> * cleanup_routine.c: New file. * Versions (libpthread) [GLIBC_2.3.3]: Add __pthread_cleanup_routine. * sysdeps/pthread/pthread.h: Add support for fully exception-based cleanup handling. * Makefile (libpthread-routines): Add cleanup_routine. Add more CFLAGS variables to compile with exceptions. Add comments why which file needs unwind tables. (tests) [have-forced-unwind==yes]: Add tst-cancelx* and tst-cleanupx* tests. * tst-cancelx1.c: New file. * tst-cancelx2.c: New file. * tst-cancelx3.c: New file. * tst-cancelx4.c: New file. * tst-cancelx5.c: New file. * tst-cancelx6.c: New file. * tst-cancelx7.c: New file. * tst-cancelx8.c: New file. * tst-cancelx9.c: New file. * tst-cancelx10.c: New file. * tst-cancelx11.c: New file. * tst-cancelx12.c: New file. * tst-cancelx13.c: New file. * tst-cancelx14.c: New file. * tst-cancelx15.c: New file. * tst-cleanupx0.c: New file. * tst-cleanupx0.expect: New file. * tst-cleanupx1.c: New file. * tst-cleanupx2.c: New file. * tst-cleanupx3.c: New file. * tst-cleanup0.c: Make standard compliant. * tst-cleanup1.c: Likewise. * sysdeps/unix/sysv/linux/sem_timedwait.c: Add cancellation support. * sysdeps/unix/sysv/linux/sem_wait.c: Likewise. * sysdeps/unix/sysv/linux/i386/i486/sem_timedwait.S: Likewise. * sysdeps/unix/sysv/linux/i386/i486/sem_wait.S: Likewise. * sysdeps/unix/sysv/linux/x86_64/sem_timedwait.S: Likewise. * sysdeps/unix/sysv/linux/x86_64/sem_wait.S: Likewise. * sysdeps/i386/tcb-offsets.sym: Add RESULT, CANCELHANDLING, and CLEANUP_JMP_BUF. * sysdeps/x86_64/tcb-offsets.sym: Likewise. * tst-cancel12.c: New file. * tst-cancel13.c: New file. * tst-cancel14.c: New file. * tst-cancel15.c: New file. * Makefile (tests): Add tst-cancel12, tst-cancel13, tst-cancel14, and tst-cancel15. * tst-cancel1.c: Add some comments. * sysdeps/unix/sysv/linux/x86_64/sem_timedwait.S: Compute relative timeout correctly.
2003-06-08 05:28:14 +00:00
exit (1);
}
if (sem_init (&sem, 0, 0) != 0)
{
nptl: Fix sem_wait and sem_timedwait cancellation (BZ#18243) This patch fixes both sem_wait and sem_timedwait cancellation point for uncontended case. In this scenario only atomics are involved and thus the futex cancellable call is not issue and a pending cancellation signal is not handled. The fix is straighforward by calling pthread_testcancel is both function start. Although it would be simpler to call CANCELLATION_P directly, I decided to add an internal pthread_testcancel alias and use it to export less internal implementation on such function. A possible change on how pthread_testcancel is internally implemented would lead to either continue to force use CANCELLATION_P or to adjust its every use. GLIBC testcase also does have tests for uncontended cases, test-cancel12 and test-cancel14.c, however both are flawed by adding another cancellation point just after thread pthread_cleanup_pop: 47 static void * 48 tf (void *arg) 49 { 50 pthread_cleanup_push (cleanup, NULL); 51 52 int e = pthread_barrier_wait (&bar); 53 if (e != 0 && e != PTHREAD_BARRIER_SERIAL_THREAD) 54 { 55 puts ("tf: 1st barrier_wait failed"); 56 exit (1); 57 } 58 59 /* This call should block and be cancelable. */ 60 sem_wait (&sem); 61 62 pthread_cleanup_pop (0); 63 64 puts ("sem_wait returned"); 65 66 return NULL; 67 } So sem_{timed}wait does not act on cancellation, pthread_cleanup_pop executes 'cleanup' and then 'puts' acts on cancellation. Since pthread_cleanup_pop removed the clean-up handler, it will ran only once and thus it won't accuse an error to indicate sem_wait has not acted on the cancellation signal. This patch also fixes this behavior by removing the cancellation point 'puts'. It also adds some cleanup on all sem_{timed}wait cancel tests. It partially fixes BZ #18243. Checked on x86_64. [BZ #18243] * nptl/pthreadP.h (__pthread_testcancel): Add prototype and hidden_proto. * nptl/pthread_testcancel.c (pthread_cancel): Add internal aliais definition. * nptl/sem_timedwait.c (sem_timedwait): Add cancellation check for uncontended case. * nptl/sem_wait.c (__new_sem_wait): Likewise. * nptl/tst-cancel12.c (cleanup): Remove wrong cancellation point. (tf): Fix check for uncontended case. (do_test): Likewise. * nptl/tst-cancel13.c (cleanup): Remove wrong cancellation point. (tf): Fix check for uncontended case. (do_test): Likewise. * nptl/tst-cancel14.c (cleanup): Remove wrong cancellation point. (tf): Fix check for uncontended case. (do_test): Likewise. * nptl/tst-cancel15.c (cleanup): Remove wrong cancellation point. (tf): Fix check for uncontended case. (do_test): Likewise.
2016-08-22 12:39:46 +00:00
puts ("error: sem_init failed");
Update. 2003-06-07 Ulrich Drepper <drepper@redhat.com> * cleanup_routine.c: New file. * Versions (libpthread) [GLIBC_2.3.3]: Add __pthread_cleanup_routine. * sysdeps/pthread/pthread.h: Add support for fully exception-based cleanup handling. * Makefile (libpthread-routines): Add cleanup_routine. Add more CFLAGS variables to compile with exceptions. Add comments why which file needs unwind tables. (tests) [have-forced-unwind==yes]: Add tst-cancelx* and tst-cleanupx* tests. * tst-cancelx1.c: New file. * tst-cancelx2.c: New file. * tst-cancelx3.c: New file. * tst-cancelx4.c: New file. * tst-cancelx5.c: New file. * tst-cancelx6.c: New file. * tst-cancelx7.c: New file. * tst-cancelx8.c: New file. * tst-cancelx9.c: New file. * tst-cancelx10.c: New file. * tst-cancelx11.c: New file. * tst-cancelx12.c: New file. * tst-cancelx13.c: New file. * tst-cancelx14.c: New file. * tst-cancelx15.c: New file. * tst-cleanupx0.c: New file. * tst-cleanupx0.expect: New file. * tst-cleanupx1.c: New file. * tst-cleanupx2.c: New file. * tst-cleanupx3.c: New file. * tst-cleanup0.c: Make standard compliant. * tst-cleanup1.c: Likewise. * sysdeps/unix/sysv/linux/sem_timedwait.c: Add cancellation support. * sysdeps/unix/sysv/linux/sem_wait.c: Likewise. * sysdeps/unix/sysv/linux/i386/i486/sem_timedwait.S: Likewise. * sysdeps/unix/sysv/linux/i386/i486/sem_wait.S: Likewise. * sysdeps/unix/sysv/linux/x86_64/sem_timedwait.S: Likewise. * sysdeps/unix/sysv/linux/x86_64/sem_wait.S: Likewise. * sysdeps/i386/tcb-offsets.sym: Add RESULT, CANCELHANDLING, and CLEANUP_JMP_BUF. * sysdeps/x86_64/tcb-offsets.sym: Likewise. * tst-cancel12.c: New file. * tst-cancel13.c: New file. * tst-cancel14.c: New file. * tst-cancel15.c: New file. * Makefile (tests): Add tst-cancel12, tst-cancel13, tst-cancel14, and tst-cancel15. * tst-cancel1.c: Add some comments. * sysdeps/unix/sysv/linux/x86_64/sem_timedwait.S: Compute relative timeout correctly.
2003-06-08 05:28:14 +00:00
exit (1);
}
if (pthread_create (&th, NULL, tf, NULL) != 0)
{
nptl: Fix sem_wait and sem_timedwait cancellation (BZ#18243) This patch fixes both sem_wait and sem_timedwait cancellation point for uncontended case. In this scenario only atomics are involved and thus the futex cancellable call is not issue and a pending cancellation signal is not handled. The fix is straighforward by calling pthread_testcancel is both function start. Although it would be simpler to call CANCELLATION_P directly, I decided to add an internal pthread_testcancel alias and use it to export less internal implementation on such function. A possible change on how pthread_testcancel is internally implemented would lead to either continue to force use CANCELLATION_P or to adjust its every use. GLIBC testcase also does have tests for uncontended cases, test-cancel12 and test-cancel14.c, however both are flawed by adding another cancellation point just after thread pthread_cleanup_pop: 47 static void * 48 tf (void *arg) 49 { 50 pthread_cleanup_push (cleanup, NULL); 51 52 int e = pthread_barrier_wait (&bar); 53 if (e != 0 && e != PTHREAD_BARRIER_SERIAL_THREAD) 54 { 55 puts ("tf: 1st barrier_wait failed"); 56 exit (1); 57 } 58 59 /* This call should block and be cancelable. */ 60 sem_wait (&sem); 61 62 pthread_cleanup_pop (0); 63 64 puts ("sem_wait returned"); 65 66 return NULL; 67 } So sem_{timed}wait does not act on cancellation, pthread_cleanup_pop executes 'cleanup' and then 'puts' acts on cancellation. Since pthread_cleanup_pop removed the clean-up handler, it will ran only once and thus it won't accuse an error to indicate sem_wait has not acted on the cancellation signal. This patch also fixes this behavior by removing the cancellation point 'puts'. It also adds some cleanup on all sem_{timed}wait cancel tests. It partially fixes BZ #18243. Checked on x86_64. [BZ #18243] * nptl/pthreadP.h (__pthread_testcancel): Add prototype and hidden_proto. * nptl/pthread_testcancel.c (pthread_cancel): Add internal aliais definition. * nptl/sem_timedwait.c (sem_timedwait): Add cancellation check for uncontended case. * nptl/sem_wait.c (__new_sem_wait): Likewise. * nptl/tst-cancel12.c (cleanup): Remove wrong cancellation point. (tf): Fix check for uncontended case. (do_test): Likewise. * nptl/tst-cancel13.c (cleanup): Remove wrong cancellation point. (tf): Fix check for uncontended case. (do_test): Likewise. * nptl/tst-cancel14.c (cleanup): Remove wrong cancellation point. (tf): Fix check for uncontended case. (do_test): Likewise. * nptl/tst-cancel15.c (cleanup): Remove wrong cancellation point. (tf): Fix check for uncontended case. (do_test): Likewise.
2016-08-22 12:39:46 +00:00
puts ("error: create failed");
Update. 2003-06-07 Ulrich Drepper <drepper@redhat.com> * cleanup_routine.c: New file. * Versions (libpthread) [GLIBC_2.3.3]: Add __pthread_cleanup_routine. * sysdeps/pthread/pthread.h: Add support for fully exception-based cleanup handling. * Makefile (libpthread-routines): Add cleanup_routine. Add more CFLAGS variables to compile with exceptions. Add comments why which file needs unwind tables. (tests) [have-forced-unwind==yes]: Add tst-cancelx* and tst-cleanupx* tests. * tst-cancelx1.c: New file. * tst-cancelx2.c: New file. * tst-cancelx3.c: New file. * tst-cancelx4.c: New file. * tst-cancelx5.c: New file. * tst-cancelx6.c: New file. * tst-cancelx7.c: New file. * tst-cancelx8.c: New file. * tst-cancelx9.c: New file. * tst-cancelx10.c: New file. * tst-cancelx11.c: New file. * tst-cancelx12.c: New file. * tst-cancelx13.c: New file. * tst-cancelx14.c: New file. * tst-cancelx15.c: New file. * tst-cleanupx0.c: New file. * tst-cleanupx0.expect: New file. * tst-cleanupx1.c: New file. * tst-cleanupx2.c: New file. * tst-cleanupx3.c: New file. * tst-cleanup0.c: Make standard compliant. * tst-cleanup1.c: Likewise. * sysdeps/unix/sysv/linux/sem_timedwait.c: Add cancellation support. * sysdeps/unix/sysv/linux/sem_wait.c: Likewise. * sysdeps/unix/sysv/linux/i386/i486/sem_timedwait.S: Likewise. * sysdeps/unix/sysv/linux/i386/i486/sem_wait.S: Likewise. * sysdeps/unix/sysv/linux/x86_64/sem_timedwait.S: Likewise. * sysdeps/unix/sysv/linux/x86_64/sem_wait.S: Likewise. * sysdeps/i386/tcb-offsets.sym: Add RESULT, CANCELHANDLING, and CLEANUP_JMP_BUF. * sysdeps/x86_64/tcb-offsets.sym: Likewise. * tst-cancel12.c: New file. * tst-cancel13.c: New file. * tst-cancel14.c: New file. * tst-cancel15.c: New file. * Makefile (tests): Add tst-cancel12, tst-cancel13, tst-cancel14, and tst-cancel15. * tst-cancel1.c: Add some comments. * sysdeps/unix/sysv/linux/x86_64/sem_timedwait.S: Compute relative timeout correctly.
2003-06-08 05:28:14 +00:00
exit (1);
}
int e = pthread_barrier_wait (&bar);
if (e != 0 && e != PTHREAD_BARRIER_SERIAL_THREAD)
{
nptl: Fix sem_wait and sem_timedwait cancellation (BZ#18243) This patch fixes both sem_wait and sem_timedwait cancellation point for uncontended case. In this scenario only atomics are involved and thus the futex cancellable call is not issue and a pending cancellation signal is not handled. The fix is straighforward by calling pthread_testcancel is both function start. Although it would be simpler to call CANCELLATION_P directly, I decided to add an internal pthread_testcancel alias and use it to export less internal implementation on such function. A possible change on how pthread_testcancel is internally implemented would lead to either continue to force use CANCELLATION_P or to adjust its every use. GLIBC testcase also does have tests for uncontended cases, test-cancel12 and test-cancel14.c, however both are flawed by adding another cancellation point just after thread pthread_cleanup_pop: 47 static void * 48 tf (void *arg) 49 { 50 pthread_cleanup_push (cleanup, NULL); 51 52 int e = pthread_barrier_wait (&bar); 53 if (e != 0 && e != PTHREAD_BARRIER_SERIAL_THREAD) 54 { 55 puts ("tf: 1st barrier_wait failed"); 56 exit (1); 57 } 58 59 /* This call should block and be cancelable. */ 60 sem_wait (&sem); 61 62 pthread_cleanup_pop (0); 63 64 puts ("sem_wait returned"); 65 66 return NULL; 67 } So sem_{timed}wait does not act on cancellation, pthread_cleanup_pop executes 'cleanup' and then 'puts' acts on cancellation. Since pthread_cleanup_pop removed the clean-up handler, it will ran only once and thus it won't accuse an error to indicate sem_wait has not acted on the cancellation signal. This patch also fixes this behavior by removing the cancellation point 'puts'. It also adds some cleanup on all sem_{timed}wait cancel tests. It partially fixes BZ #18243. Checked on x86_64. [BZ #18243] * nptl/pthreadP.h (__pthread_testcancel): Add prototype and hidden_proto. * nptl/pthread_testcancel.c (pthread_cancel): Add internal aliais definition. * nptl/sem_timedwait.c (sem_timedwait): Add cancellation check for uncontended case. * nptl/sem_wait.c (__new_sem_wait): Likewise. * nptl/tst-cancel12.c (cleanup): Remove wrong cancellation point. (tf): Fix check for uncontended case. (do_test): Likewise. * nptl/tst-cancel13.c (cleanup): Remove wrong cancellation point. (tf): Fix check for uncontended case. (do_test): Likewise. * nptl/tst-cancel14.c (cleanup): Remove wrong cancellation point. (tf): Fix check for uncontended case. (do_test): Likewise. * nptl/tst-cancel15.c (cleanup): Remove wrong cancellation point. (tf): Fix check for uncontended case. (do_test): Likewise.
2016-08-22 12:39:46 +00:00
puts ("error: 1st barrier_wait failed");
Update. 2003-06-07 Ulrich Drepper <drepper@redhat.com> * cleanup_routine.c: New file. * Versions (libpthread) [GLIBC_2.3.3]: Add __pthread_cleanup_routine. * sysdeps/pthread/pthread.h: Add support for fully exception-based cleanup handling. * Makefile (libpthread-routines): Add cleanup_routine. Add more CFLAGS variables to compile with exceptions. Add comments why which file needs unwind tables. (tests) [have-forced-unwind==yes]: Add tst-cancelx* and tst-cleanupx* tests. * tst-cancelx1.c: New file. * tst-cancelx2.c: New file. * tst-cancelx3.c: New file. * tst-cancelx4.c: New file. * tst-cancelx5.c: New file. * tst-cancelx6.c: New file. * tst-cancelx7.c: New file. * tst-cancelx8.c: New file. * tst-cancelx9.c: New file. * tst-cancelx10.c: New file. * tst-cancelx11.c: New file. * tst-cancelx12.c: New file. * tst-cancelx13.c: New file. * tst-cancelx14.c: New file. * tst-cancelx15.c: New file. * tst-cleanupx0.c: New file. * tst-cleanupx0.expect: New file. * tst-cleanupx1.c: New file. * tst-cleanupx2.c: New file. * tst-cleanupx3.c: New file. * tst-cleanup0.c: Make standard compliant. * tst-cleanup1.c: Likewise. * sysdeps/unix/sysv/linux/sem_timedwait.c: Add cancellation support. * sysdeps/unix/sysv/linux/sem_wait.c: Likewise. * sysdeps/unix/sysv/linux/i386/i486/sem_timedwait.S: Likewise. * sysdeps/unix/sysv/linux/i386/i486/sem_wait.S: Likewise. * sysdeps/unix/sysv/linux/x86_64/sem_timedwait.S: Likewise. * sysdeps/unix/sysv/linux/x86_64/sem_wait.S: Likewise. * sysdeps/i386/tcb-offsets.sym: Add RESULT, CANCELHANDLING, and CLEANUP_JMP_BUF. * sysdeps/x86_64/tcb-offsets.sym: Likewise. * tst-cancel12.c: New file. * tst-cancel13.c: New file. * tst-cancel14.c: New file. * tst-cancel15.c: New file. * Makefile (tests): Add tst-cancel12, tst-cancel13, tst-cancel14, and tst-cancel15. * tst-cancel1.c: Add some comments. * sysdeps/unix/sysv/linux/x86_64/sem_timedwait.S: Compute relative timeout correctly.
2003-06-08 05:28:14 +00:00
exit (1);
}
/* Give the child a chance to go to sleep in sem_wait. */
sleep (1);
/* Check whether cancellation is honored when waiting in sem_timedwait. */
if (pthread_cancel (th) != 0)
{
nptl: Fix sem_wait and sem_timedwait cancellation (BZ#18243) This patch fixes both sem_wait and sem_timedwait cancellation point for uncontended case. In this scenario only atomics are involved and thus the futex cancellable call is not issue and a pending cancellation signal is not handled. The fix is straighforward by calling pthread_testcancel is both function start. Although it would be simpler to call CANCELLATION_P directly, I decided to add an internal pthread_testcancel alias and use it to export less internal implementation on such function. A possible change on how pthread_testcancel is internally implemented would lead to either continue to force use CANCELLATION_P or to adjust its every use. GLIBC testcase also does have tests for uncontended cases, test-cancel12 and test-cancel14.c, however both are flawed by adding another cancellation point just after thread pthread_cleanup_pop: 47 static void * 48 tf (void *arg) 49 { 50 pthread_cleanup_push (cleanup, NULL); 51 52 int e = pthread_barrier_wait (&bar); 53 if (e != 0 && e != PTHREAD_BARRIER_SERIAL_THREAD) 54 { 55 puts ("tf: 1st barrier_wait failed"); 56 exit (1); 57 } 58 59 /* This call should block and be cancelable. */ 60 sem_wait (&sem); 61 62 pthread_cleanup_pop (0); 63 64 puts ("sem_wait returned"); 65 66 return NULL; 67 } So sem_{timed}wait does not act on cancellation, pthread_cleanup_pop executes 'cleanup' and then 'puts' acts on cancellation. Since pthread_cleanup_pop removed the clean-up handler, it will ran only once and thus it won't accuse an error to indicate sem_wait has not acted on the cancellation signal. This patch also fixes this behavior by removing the cancellation point 'puts'. It also adds some cleanup on all sem_{timed}wait cancel tests. It partially fixes BZ #18243. Checked on x86_64. [BZ #18243] * nptl/pthreadP.h (__pthread_testcancel): Add prototype and hidden_proto. * nptl/pthread_testcancel.c (pthread_cancel): Add internal aliais definition. * nptl/sem_timedwait.c (sem_timedwait): Add cancellation check for uncontended case. * nptl/sem_wait.c (__new_sem_wait): Likewise. * nptl/tst-cancel12.c (cleanup): Remove wrong cancellation point. (tf): Fix check for uncontended case. (do_test): Likewise. * nptl/tst-cancel13.c (cleanup): Remove wrong cancellation point. (tf): Fix check for uncontended case. (do_test): Likewise. * nptl/tst-cancel14.c (cleanup): Remove wrong cancellation point. (tf): Fix check for uncontended case. (do_test): Likewise. * nptl/tst-cancel15.c (cleanup): Remove wrong cancellation point. (tf): Fix check for uncontended case. (do_test): Likewise.
2016-08-22 12:39:46 +00:00
puts ("error: 1st cancel failed");
Update. 2003-06-07 Ulrich Drepper <drepper@redhat.com> * cleanup_routine.c: New file. * Versions (libpthread) [GLIBC_2.3.3]: Add __pthread_cleanup_routine. * sysdeps/pthread/pthread.h: Add support for fully exception-based cleanup handling. * Makefile (libpthread-routines): Add cleanup_routine. Add more CFLAGS variables to compile with exceptions. Add comments why which file needs unwind tables. (tests) [have-forced-unwind==yes]: Add tst-cancelx* and tst-cleanupx* tests. * tst-cancelx1.c: New file. * tst-cancelx2.c: New file. * tst-cancelx3.c: New file. * tst-cancelx4.c: New file. * tst-cancelx5.c: New file. * tst-cancelx6.c: New file. * tst-cancelx7.c: New file. * tst-cancelx8.c: New file. * tst-cancelx9.c: New file. * tst-cancelx10.c: New file. * tst-cancelx11.c: New file. * tst-cancelx12.c: New file. * tst-cancelx13.c: New file. * tst-cancelx14.c: New file. * tst-cancelx15.c: New file. * tst-cleanupx0.c: New file. * tst-cleanupx0.expect: New file. * tst-cleanupx1.c: New file. * tst-cleanupx2.c: New file. * tst-cleanupx3.c: New file. * tst-cleanup0.c: Make standard compliant. * tst-cleanup1.c: Likewise. * sysdeps/unix/sysv/linux/sem_timedwait.c: Add cancellation support. * sysdeps/unix/sysv/linux/sem_wait.c: Likewise. * sysdeps/unix/sysv/linux/i386/i486/sem_timedwait.S: Likewise. * sysdeps/unix/sysv/linux/i386/i486/sem_wait.S: Likewise. * sysdeps/unix/sysv/linux/x86_64/sem_timedwait.S: Likewise. * sysdeps/unix/sysv/linux/x86_64/sem_wait.S: Likewise. * sysdeps/i386/tcb-offsets.sym: Add RESULT, CANCELHANDLING, and CLEANUP_JMP_BUF. * sysdeps/x86_64/tcb-offsets.sym: Likewise. * tst-cancel12.c: New file. * tst-cancel13.c: New file. * tst-cancel14.c: New file. * tst-cancel15.c: New file. * Makefile (tests): Add tst-cancel12, tst-cancel13, tst-cancel14, and tst-cancel15. * tst-cancel1.c: Add some comments. * sysdeps/unix/sysv/linux/x86_64/sem_timedwait.S: Compute relative timeout correctly.
2003-06-08 05:28:14 +00:00
exit (1);
}
void *r;
if (pthread_join (th, &r) != 0)
{
nptl: Fix sem_wait and sem_timedwait cancellation (BZ#18243) This patch fixes both sem_wait and sem_timedwait cancellation point for uncontended case. In this scenario only atomics are involved and thus the futex cancellable call is not issue and a pending cancellation signal is not handled. The fix is straighforward by calling pthread_testcancel is both function start. Although it would be simpler to call CANCELLATION_P directly, I decided to add an internal pthread_testcancel alias and use it to export less internal implementation on such function. A possible change on how pthread_testcancel is internally implemented would lead to either continue to force use CANCELLATION_P or to adjust its every use. GLIBC testcase also does have tests for uncontended cases, test-cancel12 and test-cancel14.c, however both are flawed by adding another cancellation point just after thread pthread_cleanup_pop: 47 static void * 48 tf (void *arg) 49 { 50 pthread_cleanup_push (cleanup, NULL); 51 52 int e = pthread_barrier_wait (&bar); 53 if (e != 0 && e != PTHREAD_BARRIER_SERIAL_THREAD) 54 { 55 puts ("tf: 1st barrier_wait failed"); 56 exit (1); 57 } 58 59 /* This call should block and be cancelable. */ 60 sem_wait (&sem); 61 62 pthread_cleanup_pop (0); 63 64 puts ("sem_wait returned"); 65 66 return NULL; 67 } So sem_{timed}wait does not act on cancellation, pthread_cleanup_pop executes 'cleanup' and then 'puts' acts on cancellation. Since pthread_cleanup_pop removed the clean-up handler, it will ran only once and thus it won't accuse an error to indicate sem_wait has not acted on the cancellation signal. This patch also fixes this behavior by removing the cancellation point 'puts'. It also adds some cleanup on all sem_{timed}wait cancel tests. It partially fixes BZ #18243. Checked on x86_64. [BZ #18243] * nptl/pthreadP.h (__pthread_testcancel): Add prototype and hidden_proto. * nptl/pthread_testcancel.c (pthread_cancel): Add internal aliais definition. * nptl/sem_timedwait.c (sem_timedwait): Add cancellation check for uncontended case. * nptl/sem_wait.c (__new_sem_wait): Likewise. * nptl/tst-cancel12.c (cleanup): Remove wrong cancellation point. (tf): Fix check for uncontended case. (do_test): Likewise. * nptl/tst-cancel13.c (cleanup): Remove wrong cancellation point. (tf): Fix check for uncontended case. (do_test): Likewise. * nptl/tst-cancel14.c (cleanup): Remove wrong cancellation point. (tf): Fix check for uncontended case. (do_test): Likewise. * nptl/tst-cancel15.c (cleanup): Remove wrong cancellation point. (tf): Fix check for uncontended case. (do_test): Likewise.
2016-08-22 12:39:46 +00:00
puts ("error: join failed");
Update. 2003-06-07 Ulrich Drepper <drepper@redhat.com> * cleanup_routine.c: New file. * Versions (libpthread) [GLIBC_2.3.3]: Add __pthread_cleanup_routine. * sysdeps/pthread/pthread.h: Add support for fully exception-based cleanup handling. * Makefile (libpthread-routines): Add cleanup_routine. Add more CFLAGS variables to compile with exceptions. Add comments why which file needs unwind tables. (tests) [have-forced-unwind==yes]: Add tst-cancelx* and tst-cleanupx* tests. * tst-cancelx1.c: New file. * tst-cancelx2.c: New file. * tst-cancelx3.c: New file. * tst-cancelx4.c: New file. * tst-cancelx5.c: New file. * tst-cancelx6.c: New file. * tst-cancelx7.c: New file. * tst-cancelx8.c: New file. * tst-cancelx9.c: New file. * tst-cancelx10.c: New file. * tst-cancelx11.c: New file. * tst-cancelx12.c: New file. * tst-cancelx13.c: New file. * tst-cancelx14.c: New file. * tst-cancelx15.c: New file. * tst-cleanupx0.c: New file. * tst-cleanupx0.expect: New file. * tst-cleanupx1.c: New file. * tst-cleanupx2.c: New file. * tst-cleanupx3.c: New file. * tst-cleanup0.c: Make standard compliant. * tst-cleanup1.c: Likewise. * sysdeps/unix/sysv/linux/sem_timedwait.c: Add cancellation support. * sysdeps/unix/sysv/linux/sem_wait.c: Likewise. * sysdeps/unix/sysv/linux/i386/i486/sem_timedwait.S: Likewise. * sysdeps/unix/sysv/linux/i386/i486/sem_wait.S: Likewise. * sysdeps/unix/sysv/linux/x86_64/sem_timedwait.S: Likewise. * sysdeps/unix/sysv/linux/x86_64/sem_wait.S: Likewise. * sysdeps/i386/tcb-offsets.sym: Add RESULT, CANCELHANDLING, and CLEANUP_JMP_BUF. * sysdeps/x86_64/tcb-offsets.sym: Likewise. * tst-cancel12.c: New file. * tst-cancel13.c: New file. * tst-cancel14.c: New file. * tst-cancel15.c: New file. * Makefile (tests): Add tst-cancel12, tst-cancel13, tst-cancel14, and tst-cancel15. * tst-cancel1.c: Add some comments. * sysdeps/unix/sysv/linux/x86_64/sem_timedwait.S: Compute relative timeout correctly.
2003-06-08 05:28:14 +00:00
exit (1);
}
if (r != PTHREAD_CANCELED)
{
nptl: Fix sem_wait and sem_timedwait cancellation (BZ#18243) This patch fixes both sem_wait and sem_timedwait cancellation point for uncontended case. In this scenario only atomics are involved and thus the futex cancellable call is not issue and a pending cancellation signal is not handled. The fix is straighforward by calling pthread_testcancel is both function start. Although it would be simpler to call CANCELLATION_P directly, I decided to add an internal pthread_testcancel alias and use it to export less internal implementation on such function. A possible change on how pthread_testcancel is internally implemented would lead to either continue to force use CANCELLATION_P or to adjust its every use. GLIBC testcase also does have tests for uncontended cases, test-cancel12 and test-cancel14.c, however both are flawed by adding another cancellation point just after thread pthread_cleanup_pop: 47 static void * 48 tf (void *arg) 49 { 50 pthread_cleanup_push (cleanup, NULL); 51 52 int e = pthread_barrier_wait (&bar); 53 if (e != 0 && e != PTHREAD_BARRIER_SERIAL_THREAD) 54 { 55 puts ("tf: 1st barrier_wait failed"); 56 exit (1); 57 } 58 59 /* This call should block and be cancelable. */ 60 sem_wait (&sem); 61 62 pthread_cleanup_pop (0); 63 64 puts ("sem_wait returned"); 65 66 return NULL; 67 } So sem_{timed}wait does not act on cancellation, pthread_cleanup_pop executes 'cleanup' and then 'puts' acts on cancellation. Since pthread_cleanup_pop removed the clean-up handler, it will ran only once and thus it won't accuse an error to indicate sem_wait has not acted on the cancellation signal. This patch also fixes this behavior by removing the cancellation point 'puts'. It also adds some cleanup on all sem_{timed}wait cancel tests. It partially fixes BZ #18243. Checked on x86_64. [BZ #18243] * nptl/pthreadP.h (__pthread_testcancel): Add prototype and hidden_proto. * nptl/pthread_testcancel.c (pthread_cancel): Add internal aliais definition. * nptl/sem_timedwait.c (sem_timedwait): Add cancellation check for uncontended case. * nptl/sem_wait.c (__new_sem_wait): Likewise. * nptl/tst-cancel12.c (cleanup): Remove wrong cancellation point. (tf): Fix check for uncontended case. (do_test): Likewise. * nptl/tst-cancel13.c (cleanup): Remove wrong cancellation point. (tf): Fix check for uncontended case. (do_test): Likewise. * nptl/tst-cancel14.c (cleanup): Remove wrong cancellation point. (tf): Fix check for uncontended case. (do_test): Likewise. * nptl/tst-cancel15.c (cleanup): Remove wrong cancellation point. (tf): Fix check for uncontended case. (do_test): Likewise.
2016-08-22 12:39:46 +00:00
puts ("error: thread not canceled");
Update. 2003-06-07 Ulrich Drepper <drepper@redhat.com> * cleanup_routine.c: New file. * Versions (libpthread) [GLIBC_2.3.3]: Add __pthread_cleanup_routine. * sysdeps/pthread/pthread.h: Add support for fully exception-based cleanup handling. * Makefile (libpthread-routines): Add cleanup_routine. Add more CFLAGS variables to compile with exceptions. Add comments why which file needs unwind tables. (tests) [have-forced-unwind==yes]: Add tst-cancelx* and tst-cleanupx* tests. * tst-cancelx1.c: New file. * tst-cancelx2.c: New file. * tst-cancelx3.c: New file. * tst-cancelx4.c: New file. * tst-cancelx5.c: New file. * tst-cancelx6.c: New file. * tst-cancelx7.c: New file. * tst-cancelx8.c: New file. * tst-cancelx9.c: New file. * tst-cancelx10.c: New file. * tst-cancelx11.c: New file. * tst-cancelx12.c: New file. * tst-cancelx13.c: New file. * tst-cancelx14.c: New file. * tst-cancelx15.c: New file. * tst-cleanupx0.c: New file. * tst-cleanupx0.expect: New file. * tst-cleanupx1.c: New file. * tst-cleanupx2.c: New file. * tst-cleanupx3.c: New file. * tst-cleanup0.c: Make standard compliant. * tst-cleanup1.c: Likewise. * sysdeps/unix/sysv/linux/sem_timedwait.c: Add cancellation support. * sysdeps/unix/sysv/linux/sem_wait.c: Likewise. * sysdeps/unix/sysv/linux/i386/i486/sem_timedwait.S: Likewise. * sysdeps/unix/sysv/linux/i386/i486/sem_wait.S: Likewise. * sysdeps/unix/sysv/linux/x86_64/sem_timedwait.S: Likewise. * sysdeps/unix/sysv/linux/x86_64/sem_wait.S: Likewise. * sysdeps/i386/tcb-offsets.sym: Add RESULT, CANCELHANDLING, and CLEANUP_JMP_BUF. * sysdeps/x86_64/tcb-offsets.sym: Likewise. * tst-cancel12.c: New file. * tst-cancel13.c: New file. * tst-cancel14.c: New file. * tst-cancel15.c: New file. * Makefile (tests): Add tst-cancel12, tst-cancel13, tst-cancel14, and tst-cancel15. * tst-cancel1.c: Add some comments. * sysdeps/unix/sysv/linux/x86_64/sem_timedwait.S: Compute relative timeout correctly.
2003-06-08 05:28:14 +00:00
exit (1);
}
return 0;
}
#define TEST_FUNCTION do_test ()
#include "../test-skeleton.c"