glibc/sysdeps/hppa/dl-fptr.c

411 lines
11 KiB
C
Raw Normal View History

/* Manage function descriptors. Generic version.
Copyright (C) 1999-2022 Free Software Foundation, Inc.
This file is part of the GNU C Library.
The GNU C Library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version.
The GNU C Library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public
License along with the GNU C Library; if not, write to the Free
Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
02111-1307 USA. */
#include <libintl.h>
#include <unistd.h>
#include <string.h>
#include <sys/param.h>
#include <sys/mman.h>
#include <link.h>
#include <ldsodefs.h>
#include <elf/dynamic-link.h>
#include <dl-fptr.h>
#include <dl-runtime.h>
#include <dl-unmap-segments.h>
#include <atomic.h>
2017-07-16 14:51:13 +00:00
#include <libc-pointer-arith.h>
#ifndef ELF_MACHINE_BOOT_FPTR_TABLE_LEN
/* ELF_MACHINE_BOOT_FPTR_TABLE_LEN should be greater than the number of
dynamic symbols in ld.so. */
# define ELF_MACHINE_BOOT_FPTR_TABLE_LEN 256
#endif
#ifndef ELF_MACHINE_LOAD_ADDRESS
# error "ELF_MACHINE_LOAD_ADDRESS is not defined."
#endif
#ifndef COMPARE_AND_SWAP
# define COMPARE_AND_SWAP(ptr, old, new) \
(catomic_compare_and_exchange_bool_acq (ptr, new, old) == 0)
#endif
ElfW(Addr) _dl_boot_fptr_table [ELF_MACHINE_BOOT_FPTR_TABLE_LEN];
static struct local
{
struct fdesc_table *root;
struct fdesc *free_list;
unsigned int npages; /* # of pages to allocate */
/* the next to members MUST be consecutive! */
struct fdesc_table boot_table;
struct fdesc boot_fdescs[1024];
}
local =
{
#ifdef SHARED
/* Address of .boot_table is not known until runtime. */
.root = 0,
#else
.root = &local.boot_table,
#endif
.npages = 2,
.boot_table =
{
.len = sizeof (local.boot_fdescs) / sizeof (local.boot_fdescs[0]),
.first_unused = 0
}
};
/* Create a new fdesc table and return a pointer to the first fdesc
entry. The fdesc lock must have been acquired already. */
static struct fdesc_table *
new_fdesc_table (struct local *l, size_t *size)
{
size_t old_npages = l->npages;
size_t new_npages = old_npages + old_npages;
struct fdesc_table *new_table;
/* If someone has just created a new table, we return NULL to tell
the caller to use the new table. */
if (! COMPARE_AND_SWAP (&l->npages, old_npages, new_npages))
return (struct fdesc_table *) NULL;
*size = old_npages * GLRO(dl_pagesize);
new_table = __mmap (NULL, *size,
PROT_READ | PROT_WRITE, MAP_ANON | MAP_PRIVATE, -1, 0);
if (new_table == MAP_FAILED)
_dl_signal_error (errno, NULL, NULL,
N_("cannot map pages for fdesc table"));
new_table->len
= (*size - sizeof (*new_table)) / sizeof (struct fdesc);
new_table->first_unused = 1;
return new_table;
}
/* Must call _dl_fptr_init before using any other function. */
2013-06-05 20:26:40 +00:00
void
_dl_fptr_init (void)
{
struct local *l;
ELF_MACHINE_LOAD_ADDRESS (l, local);
l->root = &l->boot_table;
}
static ElfW(Addr)
make_fdesc (ElfW(Addr) ip, ElfW(Addr) gp)
{
struct fdesc *fdesc = NULL;
struct fdesc_table *root;
unsigned int old;
struct local *l;
ELF_MACHINE_LOAD_ADDRESS (l, local);
retry:
root = l->root;
while (1)
{
old = root->first_unused;
if (old >= root->len)
break;
else if (COMPARE_AND_SWAP (&root->first_unused, old, old + 1))
{
fdesc = &root->fdesc[old];
goto install;
}
}
if (l->free_list)
{
/* Get it from free-list. */
do
{
fdesc = l->free_list;
if (fdesc == NULL)
goto retry;
}
while (! COMPARE_AND_SWAP ((ElfW(Addr) *) &l->free_list,
(ElfW(Addr)) fdesc, fdesc->ip));
}
else
{
/* Create a new fdesc table. */
size_t size;
struct fdesc_table *new_table = new_fdesc_table (l, &size);
if (new_table == NULL)
goto retry;
new_table->next = root;
if (! COMPARE_AND_SWAP ((ElfW(Addr) *) &l->root,
(ElfW(Addr)) root,
(ElfW(Addr)) new_table))
{
/* Someone has just installed a new table. Return NULL to
tell the caller to use the new table. */
__munmap (new_table, size);
goto retry;
}
/* Note that the first entry was reserved while allocating the
memory for the new page. */
fdesc = &new_table->fdesc[0];
}
install:
fdesc->gp = gp;
Fix data race in setting function descriptors during lazy binding on hppa. This addresses an issue that is present mainly on SMP machines running threaded code. In a typical indirect call or PLT import stub, the target address is loaded first. Then the global pointer is loaded into the PIC register in the delay slot of a branch to the target address. During lazy binding, the target address is a trampoline which transfers to _dl_runtime_resolve(). _dl_runtime_resolve() uses the relocation offset stored in the global pointer and the linkage map stored in the trampoline to find the relocation. Then, the function descriptor is updated. In a multi-threaded application, it is possible for the global pointer to be updated between the load of the target address and the global pointer. When this happens, the relocation offset has been replaced by the new global pointer. The function pointer has probably been updated as well but there is no way to find the address of the function descriptor and to transfer to the target. So, _dl_runtime_resolve() typically crashes. HP-UX addressed this problem by adding an extra pc-relative branch to the trampoline. The descriptor is initially setup to point to the branch. The branch then transfers to the trampoline. This allowed the trampoline code to figure out which descriptor was being used without any modification to user code. I didn't use this approach as it is more complex and changes function pointer canonicalization. The order of loading the target address and global pointer in indirect calls was not consistent with the order used in import stubs. In particular, $$dyncall and some inline versions of it loaded the global pointer first. This was inconsistent with the global pointer being updated first in dl-machine.h. Assuming the accesses are ordered, we want elf_machine_fixup_plt() to store the global pointer first and calls to load it last. Then, the global pointer will be correct when the target function is entered. However, just to make things more fun, HP added support for out-of-order execution of accesses in PA 2.0. The accesses used by calls are weakly ordered. So, it's possibly under some circumstances that a function might be entered with the wrong global pointer. However, HP uses weakly ordered accesses in 64-bit HP-UX, so I assume that loading the global pointer in the delay slot of the branch must work consistently. The basic fix for the race is a combination of modifying user code to preserve the address of the function descriptor in register %r22 and setting the least-significant bit in the relocation offset. The latter was suggested by Carlos as a way to distinguish relocation offsets from global pointer values. Conventionally, %r22 is used as the address of the function descriptor in calls to $$dyncall. So, it wasn't hard to preserve the address in %r22. I have updated gcc trunk and gcc-9 branch to not clobber %r22 in $$dyncall and inline indirect calls. I have also modified the import stubs in binutils trunk and the 2.33 branch to preserve %r22. This required making the stubs one instruction longer but we save one relocation. I also modified binutils to align the .plt section on a 8-byte boundary. This allows descriptors to be updated atomically with a floting-point store. With these changes, _dl_runtime_resolve() can fallback to an alternate mechanism to find the relocation offset when it has been clobbered. There's just one additional instruction in the fast path. I tested the fallback function, _dl_fix_reloc_arg(), by changing the branch to always use the fallback. Old code still runs as it did before. Fixes bug 23296. Reviewed-by: Carlos O'Donell <carlos@redhat.com>
2020-03-30 20:36:49 +00:00
fdesc->ip = ip;
return (ElfW(Addr)) fdesc;
}
static inline ElfW(Addr) * __attribute__ ((always_inline))
make_fptr_table (struct link_map *map)
{
2017-07-16 14:51:13 +00:00
const ElfW(Sym) *symtab = (const void *) D_PTR (map, l_info[DT_SYMTAB]);
const char *strtab = (const void *) D_PTR (map, l_info[DT_STRTAB]);
ElfW(Addr) *fptr_table;
size_t size;
size_t len;
2017-07-16 14:51:13 +00:00
const ElfW(Sym) *symtabend;
2017-07-16 14:51:13 +00:00
/* Determine the end of the dynamic symbol table using the hash. */
if (map->l_info[DT_HASH] != NULL)
symtabend = (symtab + ((Elf_Symndx *) D_PTR (map, l_info[DT_HASH]))[1]);
else
/* There is no direct way to determine the number of symbols in the
dynamic symbol table and no hash table is present. The ELF
binary is ill-formed but what shall we do? Use the beginning of
the string table which generally follows the symbol table. */
symtabend = (const ElfW(Sym) *) strtab;
len = (((char *) symtabend - (char *) symtab)
/ map->l_info[DT_SYMENT]->d_un.d_val);
2017-07-16 14:51:13 +00:00
size = ALIGN_UP (len * sizeof (fptr_table[0]), GLRO(dl_pagesize));
/* We don't support systems without MAP_ANON. We avoid using malloc
because this might get called before malloc is setup. */
fptr_table = __mmap (NULL, size,
PROT_READ | PROT_WRITE, MAP_ANON | MAP_PRIVATE,
-1, 0);
if (fptr_table == MAP_FAILED)
_dl_signal_error (errno, NULL, NULL,
N_("cannot map pages for fptr table"));
if (COMPARE_AND_SWAP ((ElfW(Addr) *) &map->l_mach.fptr_table,
(ElfW(Addr)) NULL, (ElfW(Addr)) fptr_table))
map->l_mach.fptr_table_len = len;
else
__munmap (fptr_table, len * sizeof (fptr_table[0]));
return map->l_mach.fptr_table;
}
ElfW(Addr)
_dl_make_fptr (struct link_map *map, const ElfW(Sym) *sym,
ElfW(Addr) ip)
{
ElfW(Addr) *ftab = map->l_mach.fptr_table;
const ElfW(Sym) *symtab;
Elf_Symndx symidx;
struct local *l;
if (__builtin_expect (ftab == NULL, 0))
ftab = make_fptr_table (map);
symtab = (const void *) D_PTR (map, l_info[DT_SYMTAB]);
symidx = sym - symtab;
if (symidx >= map->l_mach.fptr_table_len)
_dl_signal_error (0, NULL, NULL,
N_("internal error: symidx out of range of fptr table"));
while (ftab[symidx] == 0)
{
/* GOT has already been relocated in elf_get_dynamic_info -
don't try to relocate it again. */
ElfW(Addr) fdesc
= make_fdesc (ip, map->l_info[DT_PLTGOT]->d_un.d_ptr);
if (__builtin_expect (COMPARE_AND_SWAP (&ftab[symidx], (ElfW(Addr)) NULL,
fdesc), 1))
{
/* Noone has updated the entry and the new function
descriptor has been installed. */
#if 0
const char *strtab
= (const void *) D_PTR (map, l_info[DT_STRTAB]);
ELF_MACHINE_LOAD_ADDRESS (l, local);
if (l->root != &l->boot_table
|| l->boot_table.first_unused > 20)
_dl_debug_printf ("created fdesc symbol `%s' at %lx\n",
strtab + sym->st_name, ftab[symidx]);
#endif
break;
}
else
{
/* We created a duplicated function descriptor. We put it on
free-list. */
struct fdesc *f = (struct fdesc *) fdesc;
ELF_MACHINE_LOAD_ADDRESS (l, local);
do
f->ip = (ElfW(Addr)) l->free_list;
while (! COMPARE_AND_SWAP ((ElfW(Addr) *) &l->free_list,
f->ip, fdesc));
}
}
return ftab[symidx];
}
void
_dl_unmap (struct link_map *map)
{
ElfW(Addr) *ftab = map->l_mach.fptr_table;
struct fdesc *head = NULL, *tail = NULL;
size_t i;
_dl_unmap_segments (map);
if (ftab == NULL)
return;
/* String together the fdesc structures that are being freed. */
for (i = 0; i < map->l_mach.fptr_table_len; ++i)
{
if (ftab[i])
{
*(struct fdesc **) ftab[i] = head;
head = (struct fdesc *) ftab[i];
if (tail == NULL)
tail = head;
}
}
/* Prepend the new list to the free_list: */
if (tail)
do
tail->ip = (ElfW(Addr)) local.free_list;
while (! COMPARE_AND_SWAP ((ElfW(Addr) *) &local.free_list,
tail->ip, (ElfW(Addr)) head));
__munmap (ftab, (map->l_mach.fptr_table_len
* sizeof (map->l_mach.fptr_table[0])));
map->l_mach.fptr_table = NULL;
}
extern ElfW(Addr) _dl_fixup (struct link_map *, ElfW(Word)) attribute_hidden;
static inline Elf32_Addr
elf_machine_resolve (void)
{
Elf32_Addr addr;
asm ("b,l 1f,%0\n"
" addil L'_dl_runtime_resolve - ($PIC_pcrel$0 - 1),%0\n"
"1: ldo R'_dl_runtime_resolve - ($PIC_pcrel$0 - 5)(%%r1),%0\n"
: "=r" (addr) : : "r1");
return addr;
}
2017-07-16 14:51:13 +00:00
static inline int
_dl_read_access_allowed (unsigned int *addr)
{
int result;
asm ("proberi (%1),3,%0" : "=r" (result) : "r" (addr) : );
return result;
}
ElfW(Addr)
_dl_lookup_address (const void *address)
{
ElfW(Addr) addr = (ElfW(Addr)) address;
Fix data race in setting function descriptors during lazy binding on hppa. This addresses an issue that is present mainly on SMP machines running threaded code. In a typical indirect call or PLT import stub, the target address is loaded first. Then the global pointer is loaded into the PIC register in the delay slot of a branch to the target address. During lazy binding, the target address is a trampoline which transfers to _dl_runtime_resolve(). _dl_runtime_resolve() uses the relocation offset stored in the global pointer and the linkage map stored in the trampoline to find the relocation. Then, the function descriptor is updated. In a multi-threaded application, it is possible for the global pointer to be updated between the load of the target address and the global pointer. When this happens, the relocation offset has been replaced by the new global pointer. The function pointer has probably been updated as well but there is no way to find the address of the function descriptor and to transfer to the target. So, _dl_runtime_resolve() typically crashes. HP-UX addressed this problem by adding an extra pc-relative branch to the trampoline. The descriptor is initially setup to point to the branch. The branch then transfers to the trampoline. This allowed the trampoline code to figure out which descriptor was being used without any modification to user code. I didn't use this approach as it is more complex and changes function pointer canonicalization. The order of loading the target address and global pointer in indirect calls was not consistent with the order used in import stubs. In particular, $$dyncall and some inline versions of it loaded the global pointer first. This was inconsistent with the global pointer being updated first in dl-machine.h. Assuming the accesses are ordered, we want elf_machine_fixup_plt() to store the global pointer first and calls to load it last. Then, the global pointer will be correct when the target function is entered. However, just to make things more fun, HP added support for out-of-order execution of accesses in PA 2.0. The accesses used by calls are weakly ordered. So, it's possibly under some circumstances that a function might be entered with the wrong global pointer. However, HP uses weakly ordered accesses in 64-bit HP-UX, so I assume that loading the global pointer in the delay slot of the branch must work consistently. The basic fix for the race is a combination of modifying user code to preserve the address of the function descriptor in register %r22 and setting the least-significant bit in the relocation offset. The latter was suggested by Carlos as a way to distinguish relocation offsets from global pointer values. Conventionally, %r22 is used as the address of the function descriptor in calls to $$dyncall. So, it wasn't hard to preserve the address in %r22. I have updated gcc trunk and gcc-9 branch to not clobber %r22 in $$dyncall and inline indirect calls. I have also modified the import stubs in binutils trunk and the 2.33 branch to preserve %r22. This required making the stubs one instruction longer but we save one relocation. I also modified binutils to align the .plt section on a 8-byte boundary. This allows descriptors to be updated atomically with a floting-point store. With these changes, _dl_runtime_resolve() can fallback to an alternate mechanism to find the relocation offset when it has been clobbered. There's just one additional instruction in the fast path. I tested the fallback function, _dl_fix_reloc_arg(), by changing the branch to always use the fallback. Old code still runs as it did before. Fixes bug 23296. Reviewed-by: Carlos O'Donell <carlos@redhat.com>
2020-03-30 20:36:49 +00:00
ElfW(Word) reloc_arg;
unsigned int *desc, *gptr;
2017-07-16 14:51:13 +00:00
/* Return ADDR if the least-significant two bits of ADDR are not consistent
with ADDR being a linker defined function pointer. The normal value for
a code address in a backtrace is 3. */
if (((uintptr_t) addr & 3) != 2)
2017-07-16 14:51:13 +00:00
return addr;
/* Handle special case where ADDR points to page 0. */
if ((uintptr_t) addr < 4096)
return addr;
/* Clear least-significant two bits from descriptor address. */
desc = (unsigned int *) ((uintptr_t) addr & ~3);
2017-07-16 14:51:13 +00:00
if (!_dl_read_access_allowed (desc))
return addr;
Fix data race in setting function descriptors during lazy binding on hppa. This addresses an issue that is present mainly on SMP machines running threaded code. In a typical indirect call or PLT import stub, the target address is loaded first. Then the global pointer is loaded into the PIC register in the delay slot of a branch to the target address. During lazy binding, the target address is a trampoline which transfers to _dl_runtime_resolve(). _dl_runtime_resolve() uses the relocation offset stored in the global pointer and the linkage map stored in the trampoline to find the relocation. Then, the function descriptor is updated. In a multi-threaded application, it is possible for the global pointer to be updated between the load of the target address and the global pointer. When this happens, the relocation offset has been replaced by the new global pointer. The function pointer has probably been updated as well but there is no way to find the address of the function descriptor and to transfer to the target. So, _dl_runtime_resolve() typically crashes. HP-UX addressed this problem by adding an extra pc-relative branch to the trampoline. The descriptor is initially setup to point to the branch. The branch then transfers to the trampoline. This allowed the trampoline code to figure out which descriptor was being used without any modification to user code. I didn't use this approach as it is more complex and changes function pointer canonicalization. The order of loading the target address and global pointer in indirect calls was not consistent with the order used in import stubs. In particular, $$dyncall and some inline versions of it loaded the global pointer first. This was inconsistent with the global pointer being updated first in dl-machine.h. Assuming the accesses are ordered, we want elf_machine_fixup_plt() to store the global pointer first and calls to load it last. Then, the global pointer will be correct when the target function is entered. However, just to make things more fun, HP added support for out-of-order execution of accesses in PA 2.0. The accesses used by calls are weakly ordered. So, it's possibly under some circumstances that a function might be entered with the wrong global pointer. However, HP uses weakly ordered accesses in 64-bit HP-UX, so I assume that loading the global pointer in the delay slot of the branch must work consistently. The basic fix for the race is a combination of modifying user code to preserve the address of the function descriptor in register %r22 and setting the least-significant bit in the relocation offset. The latter was suggested by Carlos as a way to distinguish relocation offsets from global pointer values. Conventionally, %r22 is used as the address of the function descriptor in calls to $$dyncall. So, it wasn't hard to preserve the address in %r22. I have updated gcc trunk and gcc-9 branch to not clobber %r22 in $$dyncall and inline indirect calls. I have also modified the import stubs in binutils trunk and the 2.33 branch to preserve %r22. This required making the stubs one instruction longer but we save one relocation. I also modified binutils to align the .plt section on a 8-byte boundary. This allows descriptors to be updated atomically with a floting-point store. With these changes, _dl_runtime_resolve() can fallback to an alternate mechanism to find the relocation offset when it has been clobbered. There's just one additional instruction in the fast path. I tested the fallback function, _dl_fix_reloc_arg(), by changing the branch to always use the fallback. Old code still runs as it did before. Fixes bug 23296. Reviewed-by: Carlos O'Donell <carlos@redhat.com>
2020-03-30 20:36:49 +00:00
/* First load the relocation offset. */
reloc_arg = (ElfW(Word)) desc[1];
atomic_full_barrier();
/* Then load first word of candidate descriptor. It should be a pointer
2017-07-16 14:51:13 +00:00
with word alignment and point to memory that can be read. */
gptr = (unsigned int *) desc[0];
if (((uintptr_t) gptr & 3) != 0
2017-07-16 14:51:13 +00:00
|| !_dl_read_access_allowed (gptr))
return addr;
/* See if descriptor requires resolution. The following trampoline is
used in each global offset table for function resolution:
Fix data race in setting function descriptors during lazy binding on hppa. This addresses an issue that is present mainly on SMP machines running threaded code. In a typical indirect call or PLT import stub, the target address is loaded first. Then the global pointer is loaded into the PIC register in the delay slot of a branch to the target address. During lazy binding, the target address is a trampoline which transfers to _dl_runtime_resolve(). _dl_runtime_resolve() uses the relocation offset stored in the global pointer and the linkage map stored in the trampoline to find the relocation. Then, the function descriptor is updated. In a multi-threaded application, it is possible for the global pointer to be updated between the load of the target address and the global pointer. When this happens, the relocation offset has been replaced by the new global pointer. The function pointer has probably been updated as well but there is no way to find the address of the function descriptor and to transfer to the target. So, _dl_runtime_resolve() typically crashes. HP-UX addressed this problem by adding an extra pc-relative branch to the trampoline. The descriptor is initially setup to point to the branch. The branch then transfers to the trampoline. This allowed the trampoline code to figure out which descriptor was being used without any modification to user code. I didn't use this approach as it is more complex and changes function pointer canonicalization. The order of loading the target address and global pointer in indirect calls was not consistent with the order used in import stubs. In particular, $$dyncall and some inline versions of it loaded the global pointer first. This was inconsistent with the global pointer being updated first in dl-machine.h. Assuming the accesses are ordered, we want elf_machine_fixup_plt() to store the global pointer first and calls to load it last. Then, the global pointer will be correct when the target function is entered. However, just to make things more fun, HP added support for out-of-order execution of accesses in PA 2.0. The accesses used by calls are weakly ordered. So, it's possibly under some circumstances that a function might be entered with the wrong global pointer. However, HP uses weakly ordered accesses in 64-bit HP-UX, so I assume that loading the global pointer in the delay slot of the branch must work consistently. The basic fix for the race is a combination of modifying user code to preserve the address of the function descriptor in register %r22 and setting the least-significant bit in the relocation offset. The latter was suggested by Carlos as a way to distinguish relocation offsets from global pointer values. Conventionally, %r22 is used as the address of the function descriptor in calls to $$dyncall. So, it wasn't hard to preserve the address in %r22. I have updated gcc trunk and gcc-9 branch to not clobber %r22 in $$dyncall and inline indirect calls. I have also modified the import stubs in binutils trunk and the 2.33 branch to preserve %r22. This required making the stubs one instruction longer but we save one relocation. I also modified binutils to align the .plt section on a 8-byte boundary. This allows descriptors to be updated atomically with a floting-point store. With these changes, _dl_runtime_resolve() can fallback to an alternate mechanism to find the relocation offset when it has been clobbered. There's just one additional instruction in the fast path. I tested the fallback function, _dl_fix_reloc_arg(), by changing the branch to always use the fallback. Old code still runs as it did before. Fixes bug 23296. Reviewed-by: Carlos O'Donell <carlos@redhat.com>
2020-03-30 20:36:49 +00:00
ldw 0(r20),r21
bv r0(r21)
ldw 4(r20),r21
tramp: b,l .-12,r20
depwi 0,31,2,r20
.word _dl_runtime_resolve
.word "_dl_runtime_resolve ltp"
got: .word _DYNAMIC
.word "struct link map address" */
if (gptr[0] == 0xea9f1fdd /* b,l .-12,r20 */
&& gptr[1] == 0xd6801c1e /* depwi 0,31,2,r20 */
&& (ElfW(Addr)) gptr[2] == elf_machine_resolve ())
Fix data race in setting function descriptors during lazy binding on hppa. This addresses an issue that is present mainly on SMP machines running threaded code. In a typical indirect call or PLT import stub, the target address is loaded first. Then the global pointer is loaded into the PIC register in the delay slot of a branch to the target address. During lazy binding, the target address is a trampoline which transfers to _dl_runtime_resolve(). _dl_runtime_resolve() uses the relocation offset stored in the global pointer and the linkage map stored in the trampoline to find the relocation. Then, the function descriptor is updated. In a multi-threaded application, it is possible for the global pointer to be updated between the load of the target address and the global pointer. When this happens, the relocation offset has been replaced by the new global pointer. The function pointer has probably been updated as well but there is no way to find the address of the function descriptor and to transfer to the target. So, _dl_runtime_resolve() typically crashes. HP-UX addressed this problem by adding an extra pc-relative branch to the trampoline. The descriptor is initially setup to point to the branch. The branch then transfers to the trampoline. This allowed the trampoline code to figure out which descriptor was being used without any modification to user code. I didn't use this approach as it is more complex and changes function pointer canonicalization. The order of loading the target address and global pointer in indirect calls was not consistent with the order used in import stubs. In particular, $$dyncall and some inline versions of it loaded the global pointer first. This was inconsistent with the global pointer being updated first in dl-machine.h. Assuming the accesses are ordered, we want elf_machine_fixup_plt() to store the global pointer first and calls to load it last. Then, the global pointer will be correct when the target function is entered. However, just to make things more fun, HP added support for out-of-order execution of accesses in PA 2.0. The accesses used by calls are weakly ordered. So, it's possibly under some circumstances that a function might be entered with the wrong global pointer. However, HP uses weakly ordered accesses in 64-bit HP-UX, so I assume that loading the global pointer in the delay slot of the branch must work consistently. The basic fix for the race is a combination of modifying user code to preserve the address of the function descriptor in register %r22 and setting the least-significant bit in the relocation offset. The latter was suggested by Carlos as a way to distinguish relocation offsets from global pointer values. Conventionally, %r22 is used as the address of the function descriptor in calls to $$dyncall. So, it wasn't hard to preserve the address in %r22. I have updated gcc trunk and gcc-9 branch to not clobber %r22 in $$dyncall and inline indirect calls. I have also modified the import stubs in binutils trunk and the 2.33 branch to preserve %r22. This required making the stubs one instruction longer but we save one relocation. I also modified binutils to align the .plt section on a 8-byte boundary. This allows descriptors to be updated atomically with a floting-point store. With these changes, _dl_runtime_resolve() can fallback to an alternate mechanism to find the relocation offset when it has been clobbered. There's just one additional instruction in the fast path. I tested the fallback function, _dl_fix_reloc_arg(), by changing the branch to always use the fallback. Old code still runs as it did before. Fixes bug 23296. Reviewed-by: Carlos O'Donell <carlos@redhat.com>
2020-03-30 20:36:49 +00:00
{
struct link_map *l = (struct link_map *) gptr[5];
/* If gp has been resolved, we need to hunt for relocation offset. */
if (!(reloc_arg & PA_GP_RELOC))
reloc_arg = _dl_fix_reloc_arg ((struct fdesc *) addr, l);
Fix data race in setting function descriptors during lazy binding on hppa. This addresses an issue that is present mainly on SMP machines running threaded code. In a typical indirect call or PLT import stub, the target address is loaded first. Then the global pointer is loaded into the PIC register in the delay slot of a branch to the target address. During lazy binding, the target address is a trampoline which transfers to _dl_runtime_resolve(). _dl_runtime_resolve() uses the relocation offset stored in the global pointer and the linkage map stored in the trampoline to find the relocation. Then, the function descriptor is updated. In a multi-threaded application, it is possible for the global pointer to be updated between the load of the target address and the global pointer. When this happens, the relocation offset has been replaced by the new global pointer. The function pointer has probably been updated as well but there is no way to find the address of the function descriptor and to transfer to the target. So, _dl_runtime_resolve() typically crashes. HP-UX addressed this problem by adding an extra pc-relative branch to the trampoline. The descriptor is initially setup to point to the branch. The branch then transfers to the trampoline. This allowed the trampoline code to figure out which descriptor was being used without any modification to user code. I didn't use this approach as it is more complex and changes function pointer canonicalization. The order of loading the target address and global pointer in indirect calls was not consistent with the order used in import stubs. In particular, $$dyncall and some inline versions of it loaded the global pointer first. This was inconsistent with the global pointer being updated first in dl-machine.h. Assuming the accesses are ordered, we want elf_machine_fixup_plt() to store the global pointer first and calls to load it last. Then, the global pointer will be correct when the target function is entered. However, just to make things more fun, HP added support for out-of-order execution of accesses in PA 2.0. The accesses used by calls are weakly ordered. So, it's possibly under some circumstances that a function might be entered with the wrong global pointer. However, HP uses weakly ordered accesses in 64-bit HP-UX, so I assume that loading the global pointer in the delay slot of the branch must work consistently. The basic fix for the race is a combination of modifying user code to preserve the address of the function descriptor in register %r22 and setting the least-significant bit in the relocation offset. The latter was suggested by Carlos as a way to distinguish relocation offsets from global pointer values. Conventionally, %r22 is used as the address of the function descriptor in calls to $$dyncall. So, it wasn't hard to preserve the address in %r22. I have updated gcc trunk and gcc-9 branch to not clobber %r22 in $$dyncall and inline indirect calls. I have also modified the import stubs in binutils trunk and the 2.33 branch to preserve %r22. This required making the stubs one instruction longer but we save one relocation. I also modified binutils to align the .plt section on a 8-byte boundary. This allows descriptors to be updated atomically with a floting-point store. With these changes, _dl_runtime_resolve() can fallback to an alternate mechanism to find the relocation offset when it has been clobbered. There's just one additional instruction in the fast path. I tested the fallback function, _dl_fix_reloc_arg(), by changing the branch to always use the fallback. Old code still runs as it did before. Fixes bug 23296. Reviewed-by: Carlos O'Donell <carlos@redhat.com>
2020-03-30 20:36:49 +00:00
_dl_fixup (l, reloc_arg);
}
return (ElfW(Addr)) desc[0];
}
rtld_hidden_def (_dl_lookup_address)