glibc/posix/Makefile

334 lines
13 KiB
Makefile
Raw Normal View History

# Copyright (C) 1991-2015 Free Software Foundation, Inc.
1995-02-18 01:27:10 +00:00
# This file is part of the GNU C Library.
# The GNU C Library is free software; you can redistribute it and/or
# modify it under the terms of the GNU Lesser General Public
# License as published by the Free Software Foundation; either
# version 2.1 of the License, or (at your option) any later version.
1995-02-18 01:27:10 +00:00
# The GNU C Library is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# Lesser General Public License for more details.
1995-02-18 01:27:10 +00:00
# You should have received a copy of the GNU Lesser General Public
# License along with the GNU C Library; if not, see
# <http://www.gnu.org/licenses/>.
1995-02-18 01:27:10 +00:00
#
# Sub-makefile for POSIX portion of the library.
#
subdir := posix
Consistently include Makeconfig after defining subdir. In <https://sourceware.org/ml/libc-alpha/2014-01/msg00196.html> I noted it was necessary to add includes of Makeconfig early in various subdirectory makefiles for the tests-special variable settings added by that patch to be conditional on configuration information. No-one commented on the general question there of whether Makeconfig should always be included immediately after the definition of subdir. This patch implements that early inclusion of Makeconfig in each directory (which is a lot easier than consistent placement of includes of Rules). Includes are added if needed, or moved up if already present. Subdirectory "all:" targets are removed, since Makeconfig provides one. There is potential for further cleanups I haven't done. Rules and Makerules have code such as ifneq "$(findstring env,$(origin headers))" "" headers := endif to override to empty any value of various variables that came from the environment. I think there is a case for Makeconfig setting all the subdirectory variables (other than subdir) to empty to ensure no outside value is going to take effect if a subdirectory fails to define a variable. (A list of such variables, possibly out of date and incomplete, is in manual/maint.texi.) Rules and Makerules would give errors if Makeconfig hadn't already been included, instead of including it themselves. The special code to override values coming from the environment would then be obsolete and could be removed. Tested x86_64, including that installed binaries are identical before and after the patch. * argp/Makefile: Include Makeconfig immediately after defining subdir. * assert/Makefile: Likewise. * benchtests/Makefile: Likewise. * catgets/Makefile: Likewise. * conform/Makefile: Likewise. * crypt/Makefile: Likewise. * csu/Makefile: Likewise. (all): Remove target. * ctype/Makefile: Include Makeconfig immediately after defining subdir. * debug/Makefile: Likewise. * dirent/Makefile: Likewise. * dlfcn/Makefile: Likewise. * gmon/Makefile: Likewise. * gnulib/Makefile: Likewise. * grp/Makefile: Likewise. * gshadow/Makefile: Likewise. * hesiod/Makefile: Likewise. * hurd/Makefile: Likewise. (all): Remove target. * iconvdata/Makefile: Include Makeconfig immediately after defining subdir. * inet/Makefile: Likewise. * intl/Makefile: Likewise. * io/Makefile: Likewise. * libio/Makefile: Likewise. (all): Remove target. * locale/Makefile: Include Makeconfig immediately after defining subdir. * login/Makefile: Likewise. * mach/Makefile: Likewise. (all): Remove target. * malloc/Makefile: Include Makeconfig immediately after defining subdir. (all): Remove target. * manual/Makefile: Include Makeconfig immediately after defining subdir. * math/Makefile: Likewise. * misc/Makefile: Likewise. * nis/Makefile: Likewise. * nss/Makefile: Likewise. * po/Makefile: Likewise. (all): Remove target. * posix/Makefile: Include Makeconfig immediately after defining subdir. * pwd/Makefile: Likewise. * resolv/Makefile: Likewise. * resource/Makefile: Likewise. * rt/Makefile: Likewise. * setjmp/Makefile: Likewise. * shadow/Makefile: Likewise. * signal/Makefile: Likewise. * socket/Makefile: Likewise. * soft-fp/Makefile: Likewise. * stdio-common/Makefile: Likewise. * stdlib/Makefile: Likewise. * streams/Makefile: Likewise. * string/Makefile: Likewise. * sunrpc/Makefile: Likewise. (all): Remove target. * sysvipc/Makefile: Include Makeconfig immediately after defining subdir. * termios/Makefile: Likewise. * time/Makefile: Likewise. * timezone/Makefile: Likewise. (all): Remove target. * wcsmbs/Makefile: Include Makeconfig immediately after defining subdir. * wctype/Makefile: Likewise. libidn/ChangeLog: * Makefile: Include Makeconfig immediately after defining subdir. localedata/ChangeLog: * Makefile: Include Makeconfig immediately after defining subdir. (all): Remove target. nptl/ChangeLog: * Makefile: Include Makeconfig immediately after defining subdir. nptl_db/ChangeLog: * Makefile: Include Makeconfig immediately after defining subdir.
2014-02-26 23:12:03 +00:00
include ../Makeconfig
Sun Apr 28 14:14:35 1996 Roland McGrath <roland@delasyd.gnu.ai.mit.edu> * sysdeps/unix/sysv/linux/i386/Makefile: New file. Wed Apr 24 17:35:30 Ulrich Drepper <drepper@cygnus.com> * inet/netinet/in.h, socket/sys/socket.h: Move to sysdeps/generic/netinet/in.h, sysdeps/generic/sys/socket.h. * netinet/in.h, sys/socket.h: Remove file. * misc/Makefile (routines): Add fdatasync. * posix/Makefile (headers): Add sched.h. (routines): Add nanosleep, sched_setp, sched_getp, sched_sets, sched_gets, sched_yield, sched_primax, sched_primin, sched_rr_gi. * posix/getconf.c (vars): Add entries for _POSIX_REALTIME_SIGNALS, _POSIX_PRIORITY_SCHEDULING, _POSIX_TIMERS, _POSIX_ASYNCHRONOUS_IO, _POSIX_PRIORITIZED_IO, _POSIX_SYNCHRONIZED_IO, _POSIX_FSYNC, _POSIX_MAPPED_FILES, _POSIX_MEMLOCK, _POSIX_MEMLOCK_RANGE, _POSIX_MEMORY_PROTECTION, _POSIX_MESSAGE_PASSING, _POSIX_SEMAPHORES, _POSIX_SHARED_MEMORY_OBJECTS. * posix/sched.h: New file. Header for POSIX scheduling interface. * posix/unistd.h: Describe options from POSIX.4. Add declaration of fdatasync. * sysdeps/generic/confname.h: Add definition for _SC_REALTIME_SIGNALS, _SC_PRIORITY_SCHEDULING, _SC_TIMERS, _SC_ASYNCHRONOUS_IO, _SC_PRIORITIZED_IO, _SC_SYNCHRONIZED_IO, _SC_FSYNC, _SC_MAPPED_FILES, _SC_MEMLOCK, _SC_MEMLOCK_RANGE, _SC_MEMORY_PROTECTION, _SC_MESSAGE_PASSING, _SC_SEMAPHORES, _SC_SHARED_MEMORY_OBJECTS. * sysdeps/generic/fdatasync.c: New file. Default implementation simply uses fsync. * sysdeps/generic/netinit/in.h: Moved to here from inet/netinet/in.h. * sysdeps/generic/schedbits.h: New file. System dependent defintion for POSIX.4 scheduling interface. * sysdeps/generic/sys/socket.h: Moved to here from socket/sys/socket.h. * sysdeps/stub/nanosleep.c, sysdeps/stub/sched_getp.c, sysdeps/stub/sched_gets.c, sysdeps/stub/sched_primax.c, sysdeps/stub/sched_primin.c, sysdeps/stub/sched_rr_gi.c, sysdeps/stub/sched_setp.c, sysdeps/stub/sched_sets.c, sysdeps/stub/sched_yield.c: New file: Stub implementation for systems missing these POSIX.4 system calls. * sysdeps/unix/sysv/linux/gnu/types.h, sysdeps/unix/sysv/linux/ioctls.h: Use kernel header for data type definitions. * sysdeps/unix/sysv/linux/netinet/in.h: New file. Linux specific version. * sysdeps/unix/sysv/linux/posix_opt.h: New file. Define POSIX options applicable for Linux. * sysdeps/unix/sysv/linux/syscalls.list: Add definitions for fdatasync, nanosleep, sched_setparam, sched_getparam, sched_setscheduler, sched_getscheduler, sched_yield, sched_get_priority_max, sched_get_priority_min, and sched_rr_get_interval. * sysdeps/unix/sysv/linux/sysconf.c: Add handling of POSIX.4 options. * sysdeps/unix/sysv/linux/termbits.h: Use kernel headers. * time/sys/time.h: Remove definition of `struct timespec'. * time/time.h (struct timespec): Move definition to here. variable, LUCKY, to use instead of setting D to -1 (which fouls
1996-04-28 18:25:22 +00:00
headers := sys/utsname.h sys/times.h sys/wait.h sys/types.h unistd.h \
* libio/ftello.c (ftello): Use _IO_off64_t for type of POS. Check for the result overflowing off_t and fail with EOVERFLOW. * libio/ioftell.c (_IO_ftell): Likewise. * libio/iofgetpos.c (_IO_new_fgetpos): Likewise. * login/logwtmp.c (logwtmp): If sizeof ut_tv != sizeof struct timeval, use a temporary timeval on the stack for gettimeofday and copy it. * login/logout.c (logout): Likewise. Reported by Steven Munroe <sjmunroe@us.ibm.com>. * sysdeps/unix/sysv/linux/bits/statfs.h (struct statfs): Use __SWORD_TYPE instead of int for member types. (struct statfs64): Likewise. * sysdeps/unix/sysv/linux/alpha/bits/statfs.h: New file. * sysdeps/unix/sysv/linux/s390/bits/statfs.h: New file. * sysdeps/unix/sysv/linux/ia64/bits/statfs.h: File removed. * sysdeps/unix/sysv/linux/sparc/bits/statfs.h: File removed. * sysdeps/unix/sysv/linux/x86_64/bits/statfs.h: File removed. * sysdeps/unix/sysv/linux/sparc/bits/statvfs.h: Moved to ... * sysdeps/unix/sysv/linux/bits/statvfs.h: ... here. (ST_NODIRATIME): Restore fixed value of 2048. * sysdeps/unix/sysv/linux/alpha/bits/statvfs.h: File removed. * sysdeps/unix/sysv/linux/ia64/bits/statvfs.h: File removed. Rearranged <bits/types.h> definitions to reduce duplication. * sysdeps/generic/bits/types.h: Rewritten, using macros from <bits/wordsize.h> and new header <bits/typesizes.h>. * posix/Makefile (headers): Add bits/typesizes.h here. * sysdeps/generic/bits/typesizes.h: New file. * sysdeps/unix/sysv/linux/alpha/bits/typesizes.h: New file. * sysdeps/unix/sysv/linux/sparc/bits/typesizes.h: New file. * sysdeps/mach/hurd/bits/typesizes.h: New file. * sysdeps/unix/sysv/linux/alpha/bits/types.h: File removed. * sysdeps/unix/sysv/linux/bits/types.h: File removed. * sysdeps/unix/sysv/linux/ia64/bits/types.h: File removed. * sysdeps/unix/sysv/linux/mips/bits/types.h: File removed. * sysdeps/unix/sysv/linux/s390/bits/types.h: File removed. * sysdeps/unix/sysv/linux/sparc/bits/types.h: File removed. * sysdeps/unix/sysv/linux/x86_64/bits/types.h: File removed. * posix/sys/types.h [__USE_POSIX199506 || __USE_UNIX98]: Include <bits/pthreadtypes.h> here, not in <bits/types.h>. * signal/signal.h: Likewise. * streams/stropts.h: Include <bits/xtitypes.h>. * streams/Makefile (headers): Add bits/xtitypes.h here. * sysdeps/generic/bits/xtitypes.h: New file. * sysdeps/s390/bits/xtitypes.h: New file. * sysdeps/ia64/bits/xtitypes.h: New file. * sysdeps/x86_64/bits/xtitypes.h: New file. * sysvipc/Makefile (headers): Add bits/ipctypes.h here. * sysdeps/generic/bits/ipctypes.h: New file. * sysdeps/mips/bits/ipctypes.h: New file. * sysdeps/gnu/bits/shm.h: Include <bits/ipctypes.h>. * sysdeps/gnu/bits/msq.h: Likewise. * sysvipc/sys/ipc.h: Likewise. 2002-10-22 Roland McGrath <roland@redhat.com> * sysdeps/generic/libc-tls.c (_dl_tls_static_used): New variable. * sysdeps/generic/ldsodefs.h (struct rtld_global): New member `_dl_tls_static_used'. (TLS_STATIC_MIN): New macro. * elf/dl-reloc.c [USE_TLS] (allocate_static_tls): New function. (CHECK_STATIC_TLS): Use it.
2002-10-23 23:50:19 +00:00
glob.h regex.h wordexp.h fnmatch.h getopt.h \
bits/types.h bits/typesizes.h bits/pthreadtypes.h \
bits/posix1_lim.h bits/posix2_lim.h bits/posix_opt.h \
Update. 1997-06-21 02:48 Ulrich Drepper <drepper@cygnus.com> * config.h.in: Add DO_STATIC_NSS. * config.make.in: Add build-static-nss. * elf/eval.c: Use __getdelim instead of __getline. * locale/programs/locale.c: Correct comment. * manual/libc.texinfo: Update copyright and date. Remove A4 option. * sysdeps/libm-ieee754/k_standard.c: Always return HUGE_VAL for gamma overflow. * sysdeps/libm-ieee754/w_gamma.c: Handle SVID and ISO C behaviour. * sysdeps/libm-ieee754/w_gammaf.c: Likewise. * sysdeps/libm-ieee754/w_gammalp.c: Likewise. * po/ko.po: Update. 1997-06-13 10:06 Richard Henderson <rth@tamu.edu> The Great Bit File Move: * configure.in (AC_INIT): Look in include/ for features.h. (sysnames): Add include as the final search directory. (AC_OUTPUT): Create a bits directory in the build directory. * Makeconfig (CPPFLAGS): Look in include/ for libc-symbols.h. * Makefile: Make sure the target directory exists when installing <gnu/stubs.h> and <gnu/lib-names.h>. * csu/Makefile: Use $(compile.S) and $(compile.c) instead of invoking $(CC) directly, as the former have the full include path. * ansidecl.h: Removed. * aliases.h: Moved to include/. * alloca.h: Likewise. * argp.h: Likewise. * argz.h: Likewise. * arpa/ftp.h: Likewise. * arpa/inet.h: Likewise. * arpa/nameser.h: Likewise. * arpa/telnet.h: Likewise. * arpa/tftp.h: Likewise. * assert.h: Likewise. * ctype.h: Likewise. * db.h: Likewise. * dirent.h: Likewise. * dlfcn.h: Likewise. * elf.h: Likewise. * endian.h: Likewise. * envz.h: Likewise. * err.h: Likewise. * errno.h: Likewise. * error.h: Likewise. * fcntl.h: Likewise. * features.h: Likewise. * fnmatch.h: Likewise. * ftw.h: Likewise. * getopt.h: Likewise. * glob.h: Likewise. * gnu-versions.h: Likewise. * grp.h: Likewise. * langinfo.h: Likewise. * libc-symbols.h: Likewise. * libgen.h: Likewise. * libintl.h: Likewise. * limits.h: Likewise. * linewrap.h: Likewise. * link.h: Likewise. * locale.h: Likewise. * malloc.h: Likewise. * math.h: Likewise. * mathcalls.h: Likewise. * mcheck.h: Likewise. * memory.h: Likewise. * netdb.h: Likewise. * netgroup.h: Likewise. * netinet/ether.h: Likewise. * netinet/in.h: Likewise. * nlist.h: Likewise. * nss.h: Likewise. * nsswitch.h: Likewise. * obstack.h: Likewise. * poll.h: Likewise. * posix1_lim.h: Likewise. * posix2_lim.h: Likewise. * printf.h: Likewise. * protocols/routed.h: Likewise. * protocols/rwhod.h: Likewise. * protocols/talkd.h: Likewise. * protocols/timed.h: Likewise. * pwd.h: Likewise. * regex.h: Likewise. * resolv.h: Likewise. * rpc/auth_unix.h: Likewise. * rpc/clnt.h: Likewise. * rpc/netdb.h: Likewise. * rpc/pmap_clnt.h: Likewise. * rpc/pmap_prot.h: Likewise. * rpc/pmap_rmt.h: Likewise. * rpc/rpc.h: Likewise. * rpc/rpc_msg.h: Likewise. * rpc/svc.h: Likewise. * rpc/svc_auth.h: Likewise. * rpc/types.h: Likewise. * rpc/xdr.h: Likewise. * sched.h: Likewise. * search.h: Likewise. * set-hooks.h: Likewise. * setjmp.h: Likewise. * sgtty.h: Likewise. * shadow.h: Likewise. * signal.h: Likewise. * stab.def: Likewise. * stab.h: Likewise. * stdio.h: Likewise. * stdlib.h: Likewise. * string.h: Likewise. * strings.h: Likewise. * sys/bitypes.h: Likewise. * sys/cdefs.h: Likewise. * sys/dir.h: Likewise. * sys/errno.h: Likewise. * sys/fcntl.h: Likewise. * sys/file.h: Likewise. * sys/gmon.h: Likewise. * sys/ioctl.h: Likewise. * sys/ipc.h: Likewise. * sys/msg.h: Likewise. * sys/poll.h: Likewise. * sys/queue.h: Likewise. * sys/resource.h: Likewise. * sys/select.h: Likewise. * sys/sem.h: Likewise. * sys/shm.h: Likewise. * sys/signal.h: Likewise. * sys/socket.h: Likewise. * sys/stat.h: Likewise. * sys/statfs.h: Likewise. * sys/syslog.h: Likewise. * sys/termios.h: Likewise. * sys/time.h: Likewise. * sys/timeb.h: Likewise. * sys/times.h: Likewise. * sys/types.h: Likewise. * sys/uio.h: Likewise. * sys/un.h: Likewise. * sys/unistd.h: Likewise. * sys/utsname.h: Likewise. * sys/vlimit.h: Likewise. * sys/vtimes.h: Likewise. * sys/wait.h: Likewise. * syscall.h: Likewise. * syslog.h: Likewise. * tar.h: Likewise. * termios.h: Likewise. * time.h: Likewise. * ttyent.h: Likewise. * unistd.h: Likewise. * utime.h: Likewise. * utmp.h: Likewise. * values.h: Likewise. * wchar.h: Likewise. * wctype.h: Likewise. * wordexp.h: Likewise. * xlocale.h: Likewise. * xopen_lim.h: Likewise. * linuxthreads/sysdeps/alpha/semaphorebits.h: -> .../bits/semaphore.h. * linuxthreads/sysdeps/powerpc/semaphorebits.h: Likewise. * linuxthreads/sysdeps/pthread/cmpxchg/semaphorebits.h: Likewise. * linuxthreads/sysdeps/pthread/no-cmpxchg/semaphorebits.h: Likewise. * linuxthreads/sysdeps/pthread/libc-lock.h: -> bits/ * sysdeps/mach/libc-lock.h: Likewise. * sysdeps/stub/libc-lock.h: Likewise. * linuxthreads/sysdeps/pthread/stdio-lock.h: Likewise. * linuxthreads/sysdeps/unix/sysv/linux/local_lim.h: Likewise. * sysdeps/mach/hurd/local_lim.h: Likewise. * sysdeps/stub/local_lim.h: Likewise. * sysdeps/unix/sysv/linux/local_lim.h: Likewise. * sysdeps/unix/sysv/local_lim.h: Likewise. * sysdeps/unix/sysv/sco3.2/local_lim.h: Likewise. * linuxthreads/sysdeps/unix/sysv/linux/posix_opt.h: Likewise. * sysdeps/mach/hurd/posix_opt.h: Likewise. * sysdeps/stub/posix_opt.h: Likewise. * sysdeps/unix/bsd/posix_opt.h: Likewise. * sysdeps/unix/bsd/ultrix4/posix_opt.h: Likewise. * sysdeps/unix/sysv/linux/posix_opt.h: Likewise. * math/cmathcalls.h: -> bits/ * math/mathcalls.h: Likewise. * misc/stab.def: -> bits/ * posix/posix1_lim.h: -> bits/ * posix/posix2_lim.h: Likewise. * sysdeps/alpha/__math.h: -> .../fpu/bits/mathinline.h * sysdeps/i386/fpu/__math.h: Likewise. * sysdeps/m68k/fpu/__math.h: Likewise. * sysdeps/m68k/fpu/switch/__math.h: Likewise. * sysdeps/powerpc/__math.h: Likewise. * sysdeps/stub/__math.h: Likewise. * sysdeps/alpha/bytesex.h: -> .../bits/endian.h * sysdeps/arm/bytesex.h: Likewise. * sysdeps/i386/bytesex.h: Likewise. * sysdeps/m68k/bytesex.h: Likewise. * sysdeps/mips/bytesex.h: Likewise. * sysdeps/mips/dec/bytesex.h: Likewise. * sysdeps/mips/mipsel/bytesex.h: Likewise. * sysdeps/mips/p40/bytesex.h: Likewise. * sysdeps/sparc/bytesex.h: Likewise. * sysdeps/stub/bytesex.h: Likewise. * sysdeps/alpha/fpu/fenvbits.h: -> .../bits/fenv.h * sysdeps/i386/fpu/fenvbits.h: Likewise. * sysdeps/m68k/fpu/fenvbits.h: Likewise. * sysdeps/powerpc/fenvbits.h: Likewise. * sysdeps/stub/fenvbits.h: Likewise. * sysdeps/alpha/jmp_buf.h: -> .../bits/setenv.h * sysdeps/arm/jmp_buf.h: Likewise. * sysdeps/i386/jmp_buf.h: Likewise. * sysdeps/m68k/jmp_buf.h: Likewise. * sysdeps/mips/jmp_buf.h: Likewise. * sysdeps/sparc/jmp_buf.h: Likewise. * sysdeps/powerpc/jmp_buf.h: Likewise. * sysdeps/stub/jmp_buf.h: Likewise. * sysdeps/vax/jmp_buf.h: Likewise. * sysdeps/generic/confname.h: -> bits/ * sysdeps/unix/sysv/irix4/confname.h: Likewise. * sysdeps/unix/sysv/sco3.2.4/confname.h: Likewise. * sysdeps/generic/gnu/types.h: -> ../bits/types.h * sysdeps/unix/sysv/linux/alpha/gnu/types.h: Likewise. * sysdeps/unix/sysv/linux/gnu/types.h: Likewise. * sysdeps/generic/ioctl-types.h: -> bits/ * sysdeps/unix/sysv/linux/ioctl-types.h: Likewise. * sysdeps/unix/sysv/linux/powerpc/ioctl-types.h: Likewise. * sysdeps/generic/iovec.h: -> .../bits/uio.h * sysdeps/unix/sysv/linux/iovec.h: Likewise. * sysdeps/generic/mathbits.h: -> .../bits/mathdef.h * sysdeps/i386/fpu/mathbits.h: Likewise. * sysdeps/m68k/fpu/mathbits.h: Likewise. * sysdeps/powerpc/mathbits.h: Likewise. * sysdeps/generic/resourcebits.h: -> .../bits/resource.h * sysdeps/unix/bsd/sun/sunos4/resourcebits.h: Likewise. * sysdeps/unix/sysv/linux/resourcebits.h: Likewise. * sysdeps/generic/schedbits.h: -> .../bits/sched.h * sysdeps/unix/sysv/linux/schedbits.h: Likewise. * sysdeps/generic/selectbits.h: -> .../bits/select.h * sysdeps/i386/selectbits.h: Likewise. * sysdeps/generic/sigaction.h: -> bits/ * sysdeps/unix/bsd/osf/sigaction.h: Likewise. * sysdeps/unix/sysv/linux/alpha/sigaction.h: Likewise. * sysdeps/unix/sysv/linux/sigaction.h: Likewise. * sysdeps/unix/sysv/linux/sparc/sigaction.h: Likewise. * sysdeps/unix/sysv/minix/sigaction.h: Likewise. * sysdeps/unix/sysv/sco3.2.4/sigaction.h: Likewise. * sysdeps/unix/sysv/sysv4/sigaction.h: Likewise. * sysdeps/generic/sigset.h: -> bits/ * sysdeps/unix/sysv/linux/sigset.h: Likewise. * sysdeps/unix/sysv/sysv4/sigset.h: Likewise. * sysdeps/generic/sockaddrcom.h: -> .../bits/sockaddr.h * sysdeps/unix/bsd/bsd4.4/sockaddrcom.h: Likewise. * sysdeps/generic/socketbits.h: -> .../bits/socket.h * sysdeps/unix/sysv/linux/socketbits.h: Likewise. * sysdeps/generic/statfsbuf.h: -> .../bits/statfs.h * sysdeps/unix/sysv/linux/statfsbuf.h: Likewise. * sysdeps/generic/termbits.h: -> .../bits/termios.h * sysdeps/unix/bsd/sun/sunos4/termbits.h: Likewise. * sysdeps/unix/sysv/linux/alpha/termbits.h: Likewise. * sysdeps/unix/sysv/linux/powerpc/termbits.h: Likewise. * sysdeps/unix/sysv/linux/sparc/termbits.h: Likewise. * sysdeps/unix/sysv/linux/termbits.h: Likewise. * sysdeps/generic/ustatbits.h: -> .../bits/ustat.h * sysdeps/unix/sysv/linux/ustatbits.h: Likewise. * sysdeps/generic/utmpbits.h: -> .../bits/utmp.h * sysdeps/gnu/utmpbits.h: Likewise. * sysdeps/unix/sysv/utmpbits.h: Likewise. * sysdeps/generic/utsnamelen.h: -> .../bits/utsname.h * sysdeps/unix/bsd/sun/sunos4/utsnamelen.h: Likewise. * sysdeps/unix/bsd/ultrix4/utsnamelen.h: Likewise. * sysdeps/unix/sysv/linux/utsnamelen.h: Likewise. * sysdeps/unix/sysv/sysv4/utsnamelen.h: Likewise. * sysdeps/unix/sysv/utsnamelen.h: Likewise. * sysdeps/generic/waitstatus.h: -> bits/ * sysdeps/i386/huge_val.h: -> bits/ * sysdeps/ieee754/huge_val.h: Likewise. * sysdeps/m68k/huge_val.h: Likewise. * sysdeps/stub/huge_val.h: Likewise. * sysdeps/vax/huge_val.h: Likewise. * sysdeps/ieee754/nan.h: Likewise. * sysdeps/stub/nan.h: Likewise. * sysdeps/mach/hurd/alpha/sigcontext.h: -> bits/ * sysdeps/mach/hurd/hppa/sigcontext.h: Likewise. * sysdeps/mach/hurd/i386/sigcontext.h: Likewise. * sysdeps/mach/hurd/mips/sigcontext.h: Likewise. * sysdeps/stub/sigcontext.h: Likewise. * sysdeps/unix/bsd/sun/m68k/sigcontext.h: Likewise. * sysdeps/unix/bsd/sun/sparc/sigcontext.h: Likewise. * sysdeps/unix/bsd/ultrix4/mips/sigcontext.h: Likewise. * sysdeps/unix/sysv/linux/sigcontext.h: Likewise. * sysdeps/mach/hurd/errnos.h: -> .../bits/errno.h * sysdeps/standalone/arm/errnos.h: Likewise. * sysdeps/stub/errnos.h: Likewise. * sysdeps/unix/bsd/bsd4.4/errnos.h: Likewise. * sysdeps/unix/sysv/linux/errnos.h: Likewise. * sysdeps/mach/hurd/fcntlbits.h: -> .../bits/fcntl.h * sysdeps/stub/fcntlbits.h: Likewise. * sysdeps/unix/bsd/bsd4.4/fcntlbits.h: Likewise. * sysdeps/unix/bsd/fcntlbits.h: Likewise. * sysdeps/unix/bsd/sun/sunos4/fcntlbits.h: Likewise. * sysdeps/unix/bsd/ultrix4/fcntlbits.h: Likewise. * sysdeps/unix/common/fcntlbits.h: Likewise. * sysdeps/unix/sysv/fcntlbits.h: Likewise. * sysdeps/unix/sysv/irix4/fcntlbits.h: Likewise. * sysdeps/unix/sysv/linux/alpha/fcntlbits.h: Likewise. * sysdeps/unix/sysv/linux/fcntlbits.h: Likewise. * sysdeps/unix/sysv/linux/sparc/fcntlbits.h: Likewise. * sysdeps/mach/hurd/ioctls.h: -> bits/ * sysdeps/stub/ioctls.h: Likewise. * sysdeps/unix/bsd/bsd4.4/ioctls.h: Likewise. * sysdeps/unix/sysv/linux/alpha/ioctls.h: Likewise. * sysdeps/unix/sysv/linux/ioctls.h: Likewise. * sysdeps/unix/sysv/linux/sparc/ioctls.h: Likewise. * sysdeps/mach/hurd/statbuf.h: -> .../bits/stat.h * sysdeps/stub/statbuf.h: Likewise. * sysdeps/unix/bsd/osf/alpha/statbuf.h: Likewise. * sysdeps/unix/bsd/statbuf.h: Likewise. * sysdeps/unix/sysv/irix4/statbuf.h: Likewise. * sysdeps/unix/sysv/linux/alpha/statbuf.h: Likewise. * sysdeps/unix/sysv/linux/statbuf.h: Likewise. * sysdeps/unix/sysv/statbuf.h: Likewise. * sysdeps/unix/sysv/sysv4/i386/statbuf.h: Likewise. * sysdeps/unix/sysv/sysv4/solaris2/statbuf.h: Likewise. * sysdeps/standalone/stdio_lim.h: -> bits/ * sysdeps/stub/stdio_lim.h: Likewise. * sysdeps/stub/direntry.h: -> ../bits/dirent.h * sysdeps/unix/bsd/bsd4.4/direntry.h: Likewise. * sysdeps/unix/bsd/direntry.h: Likewise. * sysdeps/unix/common/direntry.h: Likewise. * sysdeps/unix/sysv/direntry.h: Likewise. * sysdeps/unix/sysv/linux/direntry.h: Likewise. * sysdeps/stub/elfclass.h: -> bits/ * sysdeps/wordsize-32/elfclass.h: Likewise. * sysdeps/wordsize-64/elfclass.h: Likewise. * sysdeps/stub/signum.h: -> bits/ * sysdeps/unix/bsd/signum.h: Likewise. * sysdeps/unix/bsd/sun/signum.h: Likewise. * sysdeps/unix/sysv/irix4/signum.h: Likewise. * sysdeps/unix/sysv/linux/alpha/signum.h: Likewise. * sysdeps/unix/sysv/linux/signum.h: Likewise. * sysdeps/unix/sysv/linux/sparc/signum.h: Likewise. * sysdeps/unix/sysv/signum.h: Likewise. * sysdeps/unix/sysv/sysv4/signum.h: Likewise. * sysdeps/unix/sysv/sysv4/solaris2/signum.h: Likewise. * sysdeps/stub/sys/ipc_buf.h: -> .../bits/ipc.h * sysdeps/unix/sysv/linux/alpha/sys/ipc_buf.h: Likewise. * sysdeps/unix/sysv/linux/sys/ipc_buf.h: Likewise. * sysdeps/stub/sys/msq_buf.h: -> .../bits/msq.h * sysdeps/unix/sysv/linux/sys/msq_buf.h: Likewise. * sysdeps/stub/sys/sem_buf.h: -> .../bits/sem.h * sysdeps/unix/sysv/linux/sys/sem_buf.h: Likewise. * sysdeps/stub/sys/shm_buf.h: -> .../bits/shm.h * sysdeps/unix/sysv/linux/sys/shm_buf.h: Likewise. * sysdeps/stub/timebits.h: -> .../bits/time.h * sysdeps/unix/sysv/linux/alpha/timebits.h: Likewise. * sysdeps/unix/sysv/linux/timebits.h: Likewise. * sysdeps/stub/waitflags.h: -> bits/ * sysdeps/unix/bsd/waitflags.h: Likewise. * sysdeps/unix/sysv/linux/waitflags.h: Likewise. * sysdeps/unix/sysv/sysv4/waitflags.h: Likewise. * sysdeps/unix/sysv/linux/alpha/sys/kernel_termios.h: -> ../ * sysdeps/unix/sysv/linux/powerpc/sys/kernel_termios.h: Likewise. * sysdeps/unix/sysv/linux/sys/kernel_termios.h: Likewise. * sysdeps/unix/sysv/linux/sys/socketcall.h: -> ../ * argp/argp-fmtstream.h: Standardize the multiple-include protect. * argp/argp.h: Likewise. * catgets/nl_types.h: Likewise. * crypt/sysdeps/unix/crypt.h: Likewise. * ctype/ctype.h: Likewise. * db/db.h: Likewise. * db/mpool.h: Likewise. * db/ndbm.h: Likewise. * dirent/dirent.h: Likewise. * elf/dlfcn.h: Likewise. * elf/elf.h: Likewise. * elf/link.h: Likewise. * gmon/sys/gmon.h: Likewise. * gmon/sys/gmon_out.h: Likewise. * grp/grp.h: Likewise. * inet/aliases.h: Likewise. * inet/arpa/ftp.h: Likewise. * inet/arpa/inet.h: Likewise. * inet/arpa/telnet.h: Likewise. * inet/arpa/tftp.h: Likewise. * inet/netinet/ether.h: Likewise. * inet/netinet/icmp6.h: Likewise. * inet/netinet/in.h: Likewise. * inet/netinet/ip6.h: Likewise. * inet/protocols/routed.h: Likewise. * inet/protocols/rwhod.h: Likewise. * inet/protocols/talkd.h: Likewise. * inet/protocols/timed.h: Likewise. * intl/libintl.h: Likewise. * io/fcntl.h: Likewise. * io/fts.h: Likewise. * io/ftw.h: Likewise. * io/sys/poll.h: Likewise. * io/sys/stat.h: Likewise. * io/sys/statfs.h: Likewise. * io/utime.h: Likewise. * linuxthreads/semaphore.h: Likewise. * linuxthreads/sysdeps/pthread/pthread.h: Likewise. * locale/locale.h: Likewise. * login/pty.h: Likewise. * login/utmp.h: Likewise. * malloc/malloc.h: Likewise. * malloc/obstack.h: Likewise. * math/complex.h: Likewise. * math/fenv.h: Likewise. * math/math.h: Likewise. * md5-crypt/md5.h: Likewise. * misc/ar.h: Likewise. * misc/err.h: Likewise. * misc/error.h: Likewise. * misc/fstab.h: Likewise. * misc/libgen.h: Likewise. * misc/nlist.h: Likewise. * misc/sys/cdefs.h: Likewise. * misc/sys/file.h: Likewise. * misc/sys/ioctl.h: Likewise. * misc/sys/queue.h: Likewise. * misc/sys/select.h: Likewise. * misc/sys/syslog.h: Likewise. * misc/sys/uio.h: Likewise. * misc/sysexits.h: Likewise. * misc/ttyent.h: Likewise. * nss/nss.h: Likewise. * posix/fnmatch.h: Likewise. * posix/getopt.h: Likewise. * posix/glob.h: Likewise. * posix/regex.h: Likewise. * posix/sys/times.h: Likewise. * posix/sys/types.h: Likewise. * posix/sys/utsname.h: Likewise. * posix/sys/wait.h: Likewise. * posix/tar.h: Likewise. * posix/unistd.h: Likewise. * posix/wordexp.h: Likewise. * pwd/pwd.h: Likewise. * resolv/arpa/nameser.h: Likewise. * resolv/netdb.h: Likewise. * resolv/resolv.h: Likewise. * resource/sys/resource.h: Likewise. * resource/sys/vlimit.h: Likewise. * resource/sys/vtimes.h: Likewise. * setjmp/setjmp.h: Likewise. * shadow/shadow.h: Likewise. * socket/sys/socket.h: Likewise. * socket/sys/un.h: Likewise. * stdlib/exit.h: Likewise. * stdlib/fmtmsg.h: Likewise. * stdlib/monetary.h: Likewise. * stdlib/stdlib.h: Likewise. * string/argz.h: Likewise. * string/envz.h: Likewise. * string/memory.h: Likewise. * string/string.h: Likewise. * string/strings.h: Likewise. * sunrpc/rpc/rpc.h: Likewise. * sunrpc/rpc/svc.h: Likewise. * sunrpc/rpc/types.h: Likewise. * sunrpc/rpc/xdr.h: Likewise. * termios/sys/ttychars.h: Likewise. * termios/termios.h: Likewise. * argp/argp-parse.c: <foo.h> -> <bits/foo.h>. * crypt/sysdeps/unix/crypt_util.c: Likewise. * dirent/dirent.h: Likewise. * elf/link.h: Likewise. * grp/fgetgrent.c: Likewise. * grp/grp.h: Likewise. * hurd/hurd/ioctl.h: Likewise. * inet/getnameinfo.c: Likewise. * inet/getnetgrent_r.c: Likewise. * inet/inet_ntoa.c: Likewise. * inet/netinet/in.h: Likewise. * io/fcntl.h: Likewise. * io/ftw.h: Likewise. * io/sys/stat.h: Likewise. * io/sys/statfs.h: Likewise. * io/utime.h: Likewise. * libio/_G_config.h: Likewise. * libio/libio.h: Likewise. * libio/libioP.h: Likewise. * libio/stdio.h: Likewise. * linuxthreads/lockfile.c: Likewise. * linuxthreads/semaphore.h: Likewise. * locale/duplocale.c: Likewise. * locale/freelocale.c: Likewise. * locale/lc-time.c: Likewise. * locale/setlocale.c: Likewise. * login/getutent_r.c: Likewise. * login/getutid_r.c: Likewise. * login/getutline_r.c: Likewise. * login/lastlog.h: Likewise. * login/pty.h: Likewise. * login/utmp.h: Likewise. * login/utmpname.c: Likewise. * malloc/mtrace.c: Likewise. * malloc/thread-m.h: Likewise. * math/complex.h: Likewise. * math/fenv.h: Likewise. * math/libm-test.c: Likewise. * math/math.h: Likewise. * misc/sgtty.h: Likewise. * misc/stab.h: Likewise. * misc/sys/ioctl.h: Likewise. * misc/sys/select.h: Likewise. * misc/sys/uio.h: Likewise. * misc/sys/ustat.h: Likewise. * misc/syslog.c: Likewise. * nis/nss_compat/compat-grp.c: Likewise. * nis/nss_compat/compat-pwd.c: Likewise. * nis/nss_compat/compat-spwd.c: Likewise. * nis/nss_nis/nis-alias.c: Likewise. * nis/nss_nis/nis-ethers.c: Likewise. * nis/nss_nis/nis-grp.c: Likewise. * nis/nss_nis/nis-hosts.c: Likewise. * nis/nss_nis/nis-netgrp.c: Likewise. * nis/nss_nis/nis-network.c: Likewise. * nis/nss_nis/nis-proto.c: Likewise. * nis/nss_nis/nis-publickey.c: Likewise. * nis/nss_nis/nis-pwd.c: Likewise. * nis/nss_nis/nis-rpc.c: Likewise. * nis/nss_nis/nis-service.c: Likewise. * nis/nss_nis/nis-spwd.c: Likewise. * nss_nisplus/nisplus-alias.c: Likewise. * nis/nss_nisplus/nisplus-ethers.c: Likewise. * nis/nss_nisplus/nisplus-grp.c: Likewise. * nis/nss_nisplus/nisplus-hosts.c: Likewise. * nis/nss_nisplus/nisplus-netgrp.c: Likewise. * nis/nss_nisplus/nisplus-netgrp.c: Likewise. * nis/nss_nisplus/nisplus-proto.c: Likewise. * nis/nss_nisplus/nisplus-pwd.c: Likewise. * nis/nss_nisplus/nisplus-rpc.c: Likewise. * nis/nss_nisplus/nisplus-service.c: Likewise. * nis/nss_nisplus/nisplus-spwd.c: Likewise. * nis/ypclnt.c: Likewise. * nss/getXXbyYY.c: Likewise. * nss/getXXent.c: Likewise. * nss/getXXent_r.c: Likewise. * nss/nss_db/db-XXX.c: Likewise. * nss/nss_db/db-alias.c: Likewise. * nss/nss_db/db-netgrp.c: Likewise. * nss/nss_files/files-XXX.c: Likewise. * nss/nss_files/files-alias.c: Likewise. * nss/nsswitch.c: Likewise. * posix/sched.h: Likewise. * posix/sys/types.h: Likewise. * posix/sys/utsname.h: Likewise. * posix/sys/wait.h: Likewise. * posix/unistd.h: Likewise. * pwd/fgetpwent.c: Likewise. * pwd/pwd.h: Likewise. * resource/sys/resource.h: Likewise. * setjmp/setjmp.h: Likewise. * shadow/fgetspent.c: Likewise. * shadow/lckpwdf.c: Likewise. * shadow/sgetspent.c: Likewise. * signal/signal.h: Likewise. * signal/sigsetops.c: Likewise. * socket/sys/socket.h: Likewise. * socket/sys/un.h: Likewise. * stdio/stdio.h: Likewise. * stdio-common/vfprintf.c: Likewise. * stdio-common/vfscanf.c: Likewise. * stdlib/atexit.c: Likewise. * stdlib/fmtmsg.c: Likewise. * stdlib/random.c: Likewise. * string/endian.h: Likewise. * sysdeps/alpha/w_sqrt.S: Likewise. * sysdeps/arm/__longjmp.S: Likewise. * sysdeps/arm/setjmp.S: Likewise. * sysdeps/generic/abort.c: Likewise. * sysdeps/generic/netinet/ip.h: Likewise. * sysdeps/generic/setenv.c: Likewise. * generic/sys/mman.h: Likewise. * sysdeps/i386/__longjmp.S: Likewise. * sysdeps/i386/setjmp.S: Likewise. * sysdeps/mach/hurd/dirstream.h: Likewise. * sysdeps/mach/hurd/jmp-unwind.c: Likewise. * sysdeps/posix/mk-stdiolim.c: Likewise. * sysdeps/powerpc/__longjmp.S: Likewise. * sysdeps/powerpc/setjmp.S: Likewise. * sysdeps/sparc/__longjmp.S: Likewise. * sysdeps/sparc/setjmp.S: Likewise. * sysdeps/standalone/close.c: Likewise. * sysdeps/standalone/filedesc.h: Likewise. * sysdeps/standalone/open.c: Likewise. * sysdeps/unix/bsd/bsd4.4/tcsetattr.c: Likewise. * sysdeps/unix/bsd/m68k/sysdep.S: Likewise. * sysdeps/unix/bsd/osf/sys/mman.h: Likewise. * sysdeps/unix/bsd/sun/m68k/sethostid.S: Likewise. * sysdeps/unix/bsd/sun/sparc/sethostid.S: Likewise. * sysdeps/unix/bsd/sun/sunos4/sys/mman.h: Likewise. * sysdeps/unix/bsd/ultrix4/sys/mman.h: Likewise. * sysdeps/unix/bsd/vax/sysdep.S: Likewise. * sysdeps/unix/dirstream.h: Likewise. * sysdeps/unix/i386/sysdep.S: Likewise. * sysdeps/unix/mips/sysdep.S: Likewise. * sysdeps/unix/mk-local_lim.c: Likewise. * sysdeps/unix/sparc/sysdep.S: Likewise. * sysdeps/unix/sysv/irix4/sys/mman.h: Likewise. * sysdeps/unix/sysv/linux/alpha/brk.S: Likewise. * sysdeps/unix/sysv/linux/alpha/clone.S: Likewise. * sysdeps/unix/sysv/linux/arm/clone.S: Likewise. * sysdeps/unix/sysv/linux/i386/clone.S: Likewise. * sysdeps/unix/sysv/linux/m68k/clone.S: Likewise. * sysdeps/unix/sysv/linux/netinet/ip.h: Likewise. * sysdeps/unix/sysv/linux/netinet/tcp.h: Likewise. * sysdeps/unix/sysv/linux/powerpc/clone.S: Likewise. * sysdeps/unix/sysv/linux/sys/mman.h: Likewise. * sysdeps/unix/sysv/linux/sys/syscall.h: Likewise. * sysdeps/unix/sysv/linux/tcgetattr.c: Likewise. * sysdeps/unix/sysv/sco3.2.4/sysconf.S: Likewise. * sysdeps/unix/sysv/sysv4/i386/sysdep.h: Likewise. * sysdeps/unix/sysv/sysv4/solaris2/sparc/sysdep.S: Likewise. * sysvipc/sys/ipc.h: Likewise. * sysvipc/sys/msg.h: Likewise. * sysvipc/sys/sem.h: Likewise. * sysvipc/sys/shm.h: Likewise. * termios/termios.h: Likewise. * time/localtime.c: Likewise. * time/sys/time.h: Likewise. * time/time.h: Likewise. * time/tzset.c: Likewise. * sysdeps/unix/sysv/linux/arm/socket.S: socketcall.h change. * sysdeps/unix/sysv/linux/i386/socket.S: Likewise. * sysdeps/unix/sysv/linux/m68k/socket.S: Likewise. * sysdeps/unix/sysv/linux/powerpc/socket.S: Likewise. * sysdeps/unix/sysv/linux/sparc/socket.S: Likewise. * Makefile (headers): foo.h -> bits/foo.h. * dirent/Makefile: Likewise. * elf/Makefile: Likewise. * io/Makefile: Likewise. * linuxthreads/Makefile: Likewise. * linuxthreads/sysdeps/pthread/Makefile: Likewise. * login/Makefile: Likewise. * math/Makefile: Likewise. * misc/Makefile: Likewise. * posix/Makefile: Likewise. * resource/Makefile: Likewise. * setjmp/Makefile: Likewise. * signal/Makefile: Likewise. * socket/Makefile: Likewise. * stdio-common/Makefile: Likewise. * sysdeps/unix/sysv/linux/Makefile: Likewise. * sysvipc/Makefile: Likewise. * termios/Makefile: Likewise. * time/Makefile: Likewise. * sysdeps/generic/Makefile (make_siglist-CFLAGS): Likewise. * sysdeps/posix/Makefile: stdio_lim.h -> bits/stdio_lim.h * sysdeps/unix/Makefile: Likewise with local_lim.h, errnos.h, ioctls.h, termbits.h. * sysdeps/unix/sysv/linux/Dist: sys/kernel_termios.h -> kernel_termios.h, sys/socketcall.h -> socketcall.h * elf/elf.h: Use <inttypes.h> definitions instead of __attribute__ for getting the proper length on the ELF types to be friendly to non-gcc compilers. * posix/sys/types.h: Notice when int8_t and friends are defined and don't redefine them. * sysdeps/wordsize-32/inttypes.h: Likewise. * sysdeps/wordsize-64/inttypes.h: Likewise. * sysdeps/unix/sysv/linux/arm/profil-counter.h: Get sigcontext via <signal.h> instead. * sysdeps/unix/sysv/linux/i386/profil-counter.h: Likewise. * sysdeps/unix/sysv/linux/sparc/profil-counter.h: Likewise. 1997-06-20 17:59 Kazumoto Kojima <kkojima@kk.info.kanagawa-u.ac.jp> * hurd/intr-msg.c: More 64bit changes. * mach/msg-destroy.c: Likewise. * sysdeps/mach/hurd/ioctl.c: Likewise. * sysdeps/mach/hurd/ioctls.h: Likewise. * sysdeps/mach/hurd/select.c: Likewise. * sysdeps/mach/hurd/statbuf.h: Likewise. * sysdeps/mach/hurd/mips/dl-machine.c: Hurd/MIPS64 patches. * sysdeps/mach/hurd/mips/exc2signal.c: Likewise. * sysdeps/mach/hurd/mips/init-fault.c: Likewise. * sysdeps/mach/hurd/mips/init-first.c: Likewise. * sysdeps/mach/hurd/mips/intr-msg.h: Likewise. * sysdeps/mach/hurd/mips/longjmp-ctx.c: Likewise. * sysdeps/mach/hurd/mips/longjmp-ts.c: Likewise. * sysdeps/mach/hurd/mips/sigcontext.h: Likewise. * sysdeps/mach/hurd/mips/sigreturn.c: Likewise. * sysdeps/mach/hurd/mips/trampoline.c: Likewise. * sysdeps/mach/mips/cacheflush.c: Likewise. * sysdeps/mach/mips/machine-lock.h: Likewise. * sysdeps/mach/mips/machine-sp.h: Likewise. * sysdeps/mach/mips/syscall.S: Likewise. * sysdeps/mach/mips/sysdep.h: Likewise. * sysdeps/mach/mips/thread_state.h: Likewise. * sysdeps/mach/start.c: Likewise. * sysdeps/mips/dl-machine.h: MIPS changes. * sysdeps/mips/elf/start.S: Likewise. * sysdeps/mips/init-first.c: Likewise. * sysdeps/mips/fpu_control.h: Likewise. * sysdeps/mips/machine-gmon.h: Likewise. * sysdeps/mips/jmp_buf.h: Likewise. * sysdeps/mips/__longjmp.c: Likewise. * sysdeps/mips/bsd-_setjmp.S: Likewise. * sysdeps/mips/bsd-setjmp.S: Likewise. * sysdeps/mips/setjmp.S: Likewise. * sysdeps/mips/setjmp_aux.c: Likewise. * sysdeps/mips/mips64/gmp-mparam.h: Likewise. * sysdeps/mips/add_n.S: New file. * sysdeps/mips/addmul_1.S: Likewise. * sysdeps/mips/lshift.S: Likewise. * sysdeps/mips/mul_1.S: Likewise. * sysdeps/mips/rshift.S: Likewise. * sysdeps/mips/sub_n.S: Likewise. * sysdeps/mips/submul_1.S: Likewise. * sysdeps/mips/mips64/Implies: Likewise. * sysdeps/mips/mips64/add_n.S: Likewise. * sysdeps/mips/mips64/addmul_1.S: Likewise. * sysdeps/mips/mips64/lshift.S: Likewise. * sysdeps/mips/mips64/mul_1.S: Likewise. * sysdeps/mips/mips64/rshift.S: Likewise. * sysdeps/mips/mips64/sub_n.S: Likewise. * sysdeps/mips/mips64/submul_1.S: Likewise. * sysdeps/mips/add_n.S: Removed. * sysdeps/mips/addmul_1.S: Likewise. * sysdeps/mips/lshift.S: Likewise. * sysdeps/mips/mul_1.S: Likewise. * sysdeps/mips/rshift.S: Likewise. * sysdeps/mips/sub_n.S: Likewise. * sysdeps/mips/submul_1.S: Likewise. * nss/Makefile: Prepare for static NSS. * resolv/Makefile: Likewise. * nss/nsswitch.c: Add code for static NSS. * nss/function.def: Define functions for static NSS. 1997-06-19 11:10 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de> * libc.map: Add yet more symbols. 1997-06-19 20:33 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de> * elf/dl-lookup.c (_dl_lookup_versioned_symbol): Don't pass NULL as object name to _dl_signal_error. (do_lookup): Skip objects that could not be opened. * sysdeps/m68k/dl-machine.h (elf_machine_rela): Check that the symbol was found. * sysdeps/i386/dl-machine.h (elf_machine_rel): Likewise. * sysdeps/powerpc/dl-machine.h (elf_machine_rela): Likewise. 1997-06-20 03:13 Kazumoto Kojima <kkojima@kk.info.kanagawa-u.ac.jp> * ctype/ctype-info.c: Use int32_t where `int' with 4 bytes is assumed. * ctype/ctype.h: Likewise. * math/math_private.h: Likewise. * inet/netinet/in.h: Likewise. * wctype/wctype.h: Likewise. * nss/Makefile: Only inhibit nss_files and nss_db modules if static NSS modules are not enabled. * resolv/Makefile: Likewise for nss_dns. * nss/function.def: New file. List all available lookup functions for static NSS. * nss/nsswitch.c: Add code for static NSS. 1997-06-15 21:15 Andreas Jaeger <aj@arthur.rhein-neckar.de> * math/libm-test.c (gamma_test): Test for _SVID_ and for normal behaviour. 1997-06-15 20:32 Andreas Jaeger <aj@arthur.rhein-neckar.de> * math/libm.map: Add all necessary functions, correct existing entries. 1997-06-20 02:35 a sun <asun@zoology.washington.edu> * sysdeps/unix/sysv/linux/netipx/ipx.h: Don't use kernel header. 1997-06-19 18:43 Andreas Jaeger <aj@arthur.rhein-neckar.de> * nis/nss_nisplus/nisplus-spwd.c (_nss_nisplus_parse_spent): Compare pointer with NULL. * login/logout.c (logout): Compare pututline result with NULL. * inet/rcmd.c: Correct a few typos. Reported by Erik Troan.
1997-06-21 02:59:26 +00:00
bits/local_lim.h tar.h bits/utsname.h bits/confname.h \
bits/waitflags.h bits/waitstatus.h sys/unistd.h sched.h \
bits/sched.h re_comp.h wait.h bits/environments.h cpio.h \
* sysdeps/unix/sysv/linux/libc_fatal.c: Print backtrace and memory map if requested. * debug/chk_fail.c: Request backtrace and memory map dump. * Versions.def: Add GLIBC_2.4 for libc. * debug/fgets_chk.c: New file. * debug/fgets_u_chk.c: New file. * debug/getcwd_chk.c: New file. * debug/getwd_chk.c: New file. * debug/readlink_chk.c: New file. * debug/read_chk.c: New file. * debug/pread_chk.c: New file. * debug/pread64_chk.c: New file. * debug/recv_chk.c: New file. * debug/recvfrom_chk.c: New file. * debug/Versions: Add all new functions with version GLIBC_2.4. * debug/Makefile (routines): Add fgets_chk, fgets_u_chk, read_chk, pread_chk, pread64_chk, recv_chk, recvfrom_chk, readlink_chk, getwd_chk, and getcwd_chk. Plus appropriate CFLAGS definitions. * debug/tst-chk1.c: Add more tests. * libio/bits/stdio2.h: Add macros for fgets and fgets_unlocked. * include/stdio.h: Declare __fgets_chk and __fgets_unlocked_chk. * posix/unistd.h: Include <bits/unistd.h> for fortification. * posix/bits/unistd.h: New file. * posix/Makefile (headers): Add bits/unistd.h. * socket/sys/socket.h: Include <bits/socket2.h> for fortification. * socket/bits/socket2.h: New file. * socket/Makefile (headers): Add bits/socket2.h. * string/bits/string3.h: Extend memset macro to check for zero 3rd parameter and use __memset_zero_constant_len_parameter in that case. * sysdeps/generic/memset_chk.c: Add __memset_zero_constant_len_parameter alias and linker warning. * debug/Versions: Add __memset_zero_constant_len_parameter to libc with version GLIBC_2.4. * sysdeps/generic/bits/types.h: Don't unnecessarily use __extension__ in __STD_TYPE definition. 2005-02-21 Jakub Jelinek <jakub@redhat.com> * malloc/malloc.c (malloc_printerr): If MALLOC_CHECK_={5,7}, print the error message rather than program name. 2005-02-21 Ulrich Drepper <drepper@redhat.com>
2005-02-21 23:14:10 +00:00
sys/sysmacros.h spawn.h bits/unistd.h
1995-02-18 01:27:10 +00:00
routines := \
uname \
times \
Update. 1997-12-14 21:33 Ulrich Drepper <drepper@cygnus.com> * version.h (VERSION): Bump to 2.0.91. * db2/makedb.c (process_input): Fix typo in message. * sunrpc/rpcinfo.c (pmapdump): Unify messages. * elf/dynamic-link.h: Pretty print. * elf/rtld.c: Allow multiple preloading of a shared object. * include/limits.h: Prevent multiple inclusion. * malloc/Makefile (headers): Add mcheck.h. (distribute): Remove it here. * malloc/mcheck.h: Pretty print. * malloc/mtrace.c (mallenv): Make `const'. * malloc/mtrace.pl: Don't print table head for memory leaks if there are none. * manual/memory.texi: Update descriptor of malloc hooks. * posix/Makefile (routines): Add waitid. * posix/sys/types.h [__USE_SVID || __USE_POSIX]: Define id_t based on __id_t. * posix/sys/wait.h: Define idtype_t type. Add prototype for waitid. * signal/signal.h: Move definition of sigval_t to <bits/siginfo.h>. * sysdeps/generic/waitid.c: Stub for waitid. * sysdeps/generic/bits/siginfo.h: Define sigval_t. Arrange to work the __need_siginfo_t defined. * sysdeps/unix/sysv/linux/bits/siginfo: Likewise. * sysdeps/generic/bits/types.h: Define __id_t. Correct definition of __FDMASK. * sysdeps/unix/sysv/linux/alpha/bits/types.h: Likewise. * sysdeps/unix/sysv/linux/bits/types.h: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/bits/types.h: Likewise. * sysdeps/posix/waitid.c: New file. Provided by Zack Weinberg. * rt/aio_misc.c: Rename __aio_free_req to __aio_free_request. * sysdeps/alpha/dl-machine.h (ELF_MACHINE_RUNTIME_TRAMPOLINE): Add missing parameters. * sysdeps/generic/dl-sysdep.c: Don't call __libc_init_secure. * sysdeps/generic/enbl-secure.c: Don't define __libc_uid. * sysdeps/unix/sysv/linux/init-first.c: Define __libc_uid. * sysdeps/unix/sysv/linux/sigqueue.c: Make sure __libc_uid is initialized. * sysdeps/i386/dl-machine.h: Little cleanup. * sysdeps/i386/fpu/bits/mathinline.h: Use __signbit* inline functions. (__finite): Mark function as const. Add inline code for __ieee754_atan2. * sysdeps/libm-ieee754/s_cacoshf.c: Add alternate implementation (but don't use it now). * sysdeps/libm-ieee754/s_catan.c: Use __ieee754_atan2 instead of __atan. * sysdeps/libm-ieee754/s_catanf.c: Likewise. * sysdeps/libm-ieee754/s_catanl.c: Likewise. * sysdeps/libm-ieee754/s_catanh.c: Likewise. Correct sign of real part. * sysdeps/libm-ieee754/s_catanhf.c: Likewise. * sysdeps/libm-ieee754/s_catanhl.c: Likewise. * sysdeps/libm-ieee754/s_clog10.c: Use factor to correct __ieee754_atan2 to base 10. * sysdeps/libm-ieee754/s_clog10f.c: Likewise. * sysdeps/libm-ieee754/s_clog10l.c: Likewise. * sysdeps/unix/sysv/linux/alpha/kernel_sigaction.h: Define as old_kernel_sigaction. * sysdeps/unix/sysv/linux/net/if_slip.h: Pretty print. * wctype/Makefile (routines): Add wctype_l. * wctype/wctype.h: Add declaration of __wctype_l. * wctype/wctype_l.c: New file. 1997-12-10 00:38 Ulrich Drepper <drepper@cygnus.com> * locale/C-ctype.c: Correct data for isw* functions. * locale/programs/ld-ctype.c: Write 32bit char classes in correct byte order. * wctype/test_wctype.c: Add test for isw* functions. * wctype/wctype.c: Return value with expected byte order. * sysdeps/generic/_G_config.h: Define _G_HAVE_IO_FILE_OPEN. * sysdeps/unix/sysv/linux/_G_config.h: Likewise.
1997-12-14 22:24:57 +00:00
wait waitpid wait3 wait4 waitid \
Sun Apr 28 14:14:35 1996 Roland McGrath <roland@delasyd.gnu.ai.mit.edu> * sysdeps/unix/sysv/linux/i386/Makefile: New file. Wed Apr 24 17:35:30 Ulrich Drepper <drepper@cygnus.com> * inet/netinet/in.h, socket/sys/socket.h: Move to sysdeps/generic/netinet/in.h, sysdeps/generic/sys/socket.h. * netinet/in.h, sys/socket.h: Remove file. * misc/Makefile (routines): Add fdatasync. * posix/Makefile (headers): Add sched.h. (routines): Add nanosleep, sched_setp, sched_getp, sched_sets, sched_gets, sched_yield, sched_primax, sched_primin, sched_rr_gi. * posix/getconf.c (vars): Add entries for _POSIX_REALTIME_SIGNALS, _POSIX_PRIORITY_SCHEDULING, _POSIX_TIMERS, _POSIX_ASYNCHRONOUS_IO, _POSIX_PRIORITIZED_IO, _POSIX_SYNCHRONIZED_IO, _POSIX_FSYNC, _POSIX_MAPPED_FILES, _POSIX_MEMLOCK, _POSIX_MEMLOCK_RANGE, _POSIX_MEMORY_PROTECTION, _POSIX_MESSAGE_PASSING, _POSIX_SEMAPHORES, _POSIX_SHARED_MEMORY_OBJECTS. * posix/sched.h: New file. Header for POSIX scheduling interface. * posix/unistd.h: Describe options from POSIX.4. Add declaration of fdatasync. * sysdeps/generic/confname.h: Add definition for _SC_REALTIME_SIGNALS, _SC_PRIORITY_SCHEDULING, _SC_TIMERS, _SC_ASYNCHRONOUS_IO, _SC_PRIORITIZED_IO, _SC_SYNCHRONIZED_IO, _SC_FSYNC, _SC_MAPPED_FILES, _SC_MEMLOCK, _SC_MEMLOCK_RANGE, _SC_MEMORY_PROTECTION, _SC_MESSAGE_PASSING, _SC_SEMAPHORES, _SC_SHARED_MEMORY_OBJECTS. * sysdeps/generic/fdatasync.c: New file. Default implementation simply uses fsync. * sysdeps/generic/netinit/in.h: Moved to here from inet/netinet/in.h. * sysdeps/generic/schedbits.h: New file. System dependent defintion for POSIX.4 scheduling interface. * sysdeps/generic/sys/socket.h: Moved to here from socket/sys/socket.h. * sysdeps/stub/nanosleep.c, sysdeps/stub/sched_getp.c, sysdeps/stub/sched_gets.c, sysdeps/stub/sched_primax.c, sysdeps/stub/sched_primin.c, sysdeps/stub/sched_rr_gi.c, sysdeps/stub/sched_setp.c, sysdeps/stub/sched_sets.c, sysdeps/stub/sched_yield.c: New file: Stub implementation for systems missing these POSIX.4 system calls. * sysdeps/unix/sysv/linux/gnu/types.h, sysdeps/unix/sysv/linux/ioctls.h: Use kernel header for data type definitions. * sysdeps/unix/sysv/linux/netinet/in.h: New file. Linux specific version. * sysdeps/unix/sysv/linux/posix_opt.h: New file. Define POSIX options applicable for Linux. * sysdeps/unix/sysv/linux/syscalls.list: Add definitions for fdatasync, nanosleep, sched_setparam, sched_getparam, sched_setscheduler, sched_getscheduler, sched_yield, sched_get_priority_max, sched_get_priority_min, and sched_rr_get_interval. * sysdeps/unix/sysv/linux/sysconf.c: Add handling of POSIX.4 options. * sysdeps/unix/sysv/linux/termbits.h: Use kernel headers. * time/sys/time.h: Remove definition of `struct timespec'. * time/time.h (struct timespec): Move definition to here. variable, LUCKY, to use instead of setting D to -1 (which fouls
1996-04-28 18:25:22 +00:00
alarm sleep pause nanosleep \
fork vfork _exit \
execve fexecve execv execle execl execvp execlp execvpe \
1995-02-18 01:27:10 +00:00
getpid getppid \
getuid geteuid getgid getegid getgroups setuid setgid group_member \
Update. 1997-03-16 18:43 Ulrich Drepper <drepper@cygnus.com> * manual/filesys.texi: Add documentation for scandir and alphasort. * math/math.c (fpclassify): Correct stupid typos. * math/libm-test.c: New file. libm test suite by Andreas Jaeger. * nss/nss_files/files-hosts.c: Add gethostbyname2 imlementation. * posix/Makefile (routines): Add bsd-getpgrp. * posix/bsd-getpgrp.c: New file. * posix/unistd.h [__FAVOR_BSD]: Define macro getpgrp which maps calls to __bsd_getpgrp. * sysdeps/generic/getpgrp.c: De-ANSI-declfy. * sysdeps/i386/huge_val.h: New file. ix87 specific infinity values. * sysdeps/m68k/huge_val.h: New file. m68k specific infinity values. * sysdeps/generic/huge_val.h: Remove definition of long double definition. Make it the same as the double definition. * sysdeps/libm-i387/e_acos.S: Fix bug in FPU stack handling. * sysdeps/libm-i387/e_acosf.S: Likewise. * sysdeps/libm-i387/e_acosl.S: Likewise. * sysdeps/libm-i387/e_asin.S: Likewise. * sysdeps/libm-i387/e_asinf.S: Likewise. * sysdeps/libm-i387/e_asinl.S: Likewise. * sysdeps/libm-i387/e_exp.S: Likewise. * sysdeps/libm-i387/e_expf.S: Likewise. * sysdeps/libm-i387/e_expl.S: Likewise. * sysdeps/libm-i387/e_scalbn.S: Likewise. * sysdeps/libm-i387/e_scalbnf.S: Likewise. * sysdeps/libm-i387/e_scalbnl.S: Likewise. * sysdeps/libm-i387/e_log.S: Optimize branch code. * sysdeps/libm-i387/e_logf.S: Likewise. * sysdeps/libm-i387/e_logl.S: Likewise. * sysdeps/libm-i387/e_log10.S: Likewise. * sysdeps/libm-i387/e_log10f.S: Likewise. * sysdeps/libm-i387/e_log10l.S: Likewise. * sysdeps/libm-i387/e_pow.S: Major rewrite to handle special cases. * sysdeps/libm-i387/e_powf.S: Likewise. * sysdeps/libm-i387/e_powl.S: Likewise. * sysdeps/libm-i387/e_expm1.S: Change return value for -inf argument to -1.0. * sysdeps/libm-i387/e_expm1f.S: Likewise. * sysdeps/libm-i387/e_expm1l.S: Likewise. * sysdeps/libm-i387/e_isinfl.c: Return -1 for -inf. * sysdeps/libm-i387/e_logbl.S: Correct return value. Discard first stack element after fxtract. * sysdeps/libm-ieee754/e_atan2l.c: New file. `long double' implementation for atan2 function. * sysdeps/libm-ieee754/k_standard.c: Return NAN for libm not in _SVID_ mode when acos, asin, atan2, log, log10 is called with argument out of range. Add new error case for pow(+0,neg). * sysdeps/libm-ieee754/s_fpclassifyf.c: Correct recognition of NaN and +-inf. * sysdeps/libm-ieee754/s_fpclassifyl.c: Mask out explicit leading digit in stupid 80 bit formats. * sysdeps/libm-ieee754/s_isinf.c: Rewrite to return -1 for -inf. * sysdeps/libm-ieee754/s_isinff.c: Likewise. * sysdeps/libm-ieee754/s_isinfl.c: Likewise. * sysdeps/libm-ieee754/s_scalbnl.c (huge, tiny): Adapt values for long double type. * sysdeps/libm-ieee754/w_atan2.c: Do not raise exception expect when in SVID mode. * sysdeps/libm-ieee754/w_atan2f.c: Likewise. * sysdeps/libm-ieee754/w_atan2l.c: Likewise. * sysdeps/libm-ieee754/w_pow.c: Distinguish error cases for x is +0 or -0. * sysdeps/posix/isfdtype.c: Add cast to prevent warning. * sysdeps/stub/fcntlbits.h: Update copyright. * sysdeps/unix/bsd/fcntlbits.h: Likewise. * sysdeps/unix/bsd/bsd4.4/fcntlbits.h: Likewise. * sysdeps/unix/bsd/sun/sunos4/fcntlbits.h: Likewise. * sysdeps/unix/bsd/ultrix4/fcntlbits.h: Likewise. * sysdeps/unix/common/fcntlbits.h: Likewise. * sysdeps/unix/sysv/fcntlbits.h: Likewise. Define O_FSYNC as alias of O_SYNC. Add BSD compatibility macros FAPPEND, FFSYNC, FNONBLOCK, and FNDELAY. * sysdeps/unix/sysv/irix4/fcntlbits.h: Likewise. * sysdeps/unix/readdir_r.c: Don't copy whole `struct dirent' record, only reclen bytes. * sysdeps/unix/sysv/linux/fcntlbits.h [__USE_GNU]: Add O_READ, O_WRITE and O_NORW. * sysdeps/unix/sysv/linux/alpha/fcntlbits.h: Likewise. * sysdeps/unix/sysv/linux/init-first.h: Add copyright. * sysdeps/unix/sysv/linux/fxstat.c: New file. Rewrite kernel-level struct stat to user-level form. * sysdeps/unix/sysv/linux/lxstat: New file. * sysdeps/unix/sysv/linux/xstat: New file. * sysdeps/unix/sysv/linux/kernel_stat.h: Define struct stat used in kernel. * sysdeps/unix/sysv/linux/statbuf.h (struct stat): Change definition to use prescribed types for elements. (_STAT_VER): Change to value 3. * sysdeps/unix/sysv/linux/alph/statbuf.h: Likewise. * sysdeps/unix/sysv/linux/Dist: Add kernel_stat.h. * sysdeps/unix/sysv/linux/alpha/Dist: Likewise. * time/Makefile: Correct dependencies for test-tz. 1997-03-16 14:59 Philip Blundell <phil@london.uk.eu.org> * resolv/netdb.h: Add prototypes for gai_strerror and getnameinfo (needed for IPv6 basic sockets API). 1997-03-16 15:02 a sun <asun@zoology.washington.edu> * sysdeps/unix/sysv/linux/net/if_ppp.h: Don't use incompatible kernel header. * sysdeps/unix/sysv/linux/net/ppp_defs.h: Likewise. 1997-03-14 17:15 Ulrich Drepper <drepper@cygnus.com> * db/hash/hash_bigkey.c (__big_delete): Don't call __free_ovflpage without testing for last_bfp to be NULL. Reported by fabsoft@fabserver1.zarm.uni-bremen.de. 1997-03-13 11:42 Jim Meyering <meyering@asic.sc.ti.com> * time/mktime.c (TIME_T_MIN): Work around a bug in Cray C 5.0.3.0. 1997-03-14 04:00 Kurt Garloff <garloff@kg1.ping.de> * sysdeps/unix/sysv/linux/fcntlbits.h (O_FSYNC): Make alias for O_SYNC. (FASYNC): Move to __USE_BSD section. Create new macro O_ASYNC. 1997-03-14 02:50 Ulrich Drepper <drepper@cygnus.com> * nis/nss_nis/nis-hosts.c (_nss_nis_gethostbyname2_r): New functions. Compare result for correct address type. (_nss_nis_gethostbyname_r): Use _nss_nis_gethostbyname2_r. Reported by Mirko Streckenbach <mirko@marian.hil.de>. 1997-02-17 01:40 Zlatko Calusic <zcalusic@srce.hr> * time/strptime.c (recursive): Return rp to caller. (strptime_internal): First check for long names, then abbreviated (month & weekday). 1997-03-10 19:44 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de> * Makeconfig: Remove useless definitions of ASFLAGS-%. * config.make.in (ASFLAGS-.so): Remove. * configure.in: Don't substitute ASFLAGS_SO. * sysdeps/sparc/configure.in: Remove file. * sysdeps/sparc/Makefile (ASFLAGS-.so): Define. 1997-03-11 17:00 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de> * time/strptime.c (strptime_internal) [case 'Y']: Always subtract 1900 from year, regardless of century. 1997-03-12 05:43 Ulrich Drepper <drepper@cygnus.com> * stdlib/strtod.c (_tens_in_limb) [BITS_PER_MP_LIMB > 32]: Make all numbers unsigned to make buggy gccs happy. Patch by Bryan W. Headley <bheadley@interaccess.com>. * sysdeps/unix/sysv/linux/netinet/ip.h: Add backward-compatibility definitions. Patch by a sun <asun@zoology.washington.edu>. Pretty print header. * Makerules (build-shlib): Also create symlink if library is versioned. based on a patch by H.J. Lu <hjl@gnu.ai.mit.edu>. Remove special rule to libc.so symlink. 1997-03-11 20:16 Andreas Jaeger <aj@arthur.pfalz.de> * manual/math.texi (Domain and Range Errors): Change descriptions according to recent changes for ISO C 9X. 1997-03-11 22:39 Ulrich Drepper <drepper@cygnus.com> * sysdeps/libm-ieee754/k_standard.c (__kernel_standard): Correct return values for acos, asin, and atan2. Reported by Andreas Jaeger <aj@arthur.pfalz.de>. 1997-03-10 18:16 Thorsten Kukuk <kukuk@vt.uni-paderborn.de> * ypclnt.c (__yp_bind): Fix possible buffer overflow. 1997-03-10 18:06 Bernd Schmidt <crux@Pool.Informatik.RWTH-Aachen.DE> * dirent/alphasort.c (alphasort): Interpret arguments as pointers to pointers to directory entries so that alphasort really can be used as argument for scandir. 1997-03-09 23:33 Andreas Jaeger <aj@arthur.pfalz.de> * string/strdup.c: Declare memcpy if !(_LIBC || STDC_HEADERS) instead of strcpy. 1997-03-10 03:34 Ulrich Drepper <drepper@cygnus.com> * catgets/catgets.c (catopen): Always add NLSPATH to search path for catalogs, not only if the envvar NLSPATH is not available. Reported by Andries.Brouwer@cwi.nl. 1997-03-10 02:46 Ulrich Drepper <drepper@cygnus.com> * Makeconfig (localtime-file): Don't define using installation directory. (inst_localtime-file): New variable. * time/Makefile (installed-localtime-file): Use inst_localtime-file. Reported by Edward Seidl <seidl@janed.com>. 1997-03-10 02:31 H.J. Lu <hjl@gnu.ai.mit.edu> * time/Makefile: Add source files to dependencies for test data. 1997-03-09 22:53 Thorsten Kukuk <kukuk@weber.uni-paderborn.de> * nis/nss_nis/nis-ethers.c: Don't ignore return value of yp_all. * nis/nss_nis/nis-proto.c: Likewise. * nis/nss_nis/nis-rpc.c: Likewise. * nis/nss_nis/nis-service.c: Likewise. 1997-03-08 14:37 Miguel de Icaza <miguel@nuclecu.unam.mx> * sysdeps/sparc/dl-machine.h (elf_machine_rela): Upgrade to versioning; Added missing R_SPARC_WDISP30 handling. (RTLD_START): Implement it. * sysdeps/unix/sysv/linux/sparc/brk.c: Fix. * sysdeps/unix/sysv/linux/sparc/start.c: Startup code for Linux/SPARC. 1997-03-02 18:06 Miguel de Icaza <miguel@nuclecu.unam.mx> * sysdeps/sparc/dl-machine.h (RTLD_START): Make arg as expected by the dynamic linker instead of having a new conditional define. Thanks to Richard Henderson for pointing this out. * elf/rtld.c: Remove usage of ELF_ADJUST_ARG. 1997-03-20 20:44 Thomas Bushnell, n/BSG <thomas@gnu.ai.mit.edu> * sysdeps/mach/hurd/euidaccess.c: Define as __euidaccess and make euidaccess weak alias. 1997-03-07 10:30 Thomas Bushnell, n/BSG <thomas@gnu.ai.mit.edu> * stdio-common/printf_fphex.c (MIN): New macro. * sysdeps/generic/netinet/in.h: Include <sys/types.h>. * sysdeps/generic/sys/mman.h (msync): Mention third arg. * sysdeps/generic/netinet/in.h: Add definitions for IPv6 basic API. (See change by Philip Blundell on Feb 16, 1997.) 1997-03-05 10:40 Thomas Bushnell, n/BSG <thomas@gnu.ai.mit.edu> * hurd/hurd.h (vpprintf): Include <stdarg.h>. New declaration. * hurd/set-host.c (_hurd_set_host_config): Cast second arg to __file_name_split. * mach/mach_error.c (mach_error_string_int): Give full prototype. * mach/errstring.c (mach_error_string_int): Likewise. * mach/error_compat.c (__mach_error_map_compat): Likewise. * hurd/vpprintf.c (pwrite, vpprintf): Likewise. * stdio/vasprintf.c (vasprintf): Likewise. * mach/mach/mach_traps.h: Include <mach/kern_return.h>. * mach/spin-solid.c: Include <mach/mach_traps.h>. * mach/spin-solid.c (__spin_lock_solid): Provide arg to swtch_pri. * mach/mach_init.c: Include <mach/mig_support.h>. * mach/mach_error.h (mach_error_string, mach_error, mach_error_type): Always provide prototypes. * mach/mach/error.h (mach_error_fn_t): Comment out declaration; it appears to be entirely unused dead code. * stdio/stdio.h (freopen): Fix spelling error. 1997-03-02 13:38 Miles Bader <miles@gnu.ai.mit.edu> * string/argz.h (__need_error_t): New macro, before including <errno.h> [!__const] (__const): New macro. [!__error_t_defined] (error_t): New typedef. * sysdeps/generic/socketbits.h: Add PF_FILE as synonym for PF_LOCAL * sysdeps/unix/sysv/linux/socketbits.h: Likewise.
1997-03-16 20:28:07 +00:00
getpgid setpgid getpgrp bsd-getpgrp setpgrp getsid setsid \
* elf/rtld-Rules ($(objpfx)rtld-libc.a): Use $(verbose) in ar command. * sysdeps/mach/hurd/getresuid.c: New file. * sysdeps/mach/hurd/getresgid.c: New file. * sysdeps/mach/hurd/setresuid.c: New file. * sysdeps/mach/hurd/setresgid.c: New file. * posix/unistd.h [__USE_GNU] (getresuid, getresgid, setresuid, setresgid): Declare them. * NEWS: Mention it. * include/unistd.h (__getresuid, __getresgid, __setresuid, __setresgid): Declare them, add libc_hidden_proto. * posix/Versions (libc: GLIBC_2.3.2): New set. Add getresuid, getresgid, setresuid, setresgid here. * Versions.def (libc): Define GLIBC_2.3.2 set. * sysdeps/generic/getresuid.c (__getresuid): Fix argument types. Add libc_hidden_def. * sysdeps/generic/getresgid.c (__getresgid): Likewise. * sysdeps/generic/setresgid.c: New file. * sysdeps/generic/setresuid.c: New file. * sysdeps/unix/sysv/linux/Makefile [$(subdir) = misc] (sysdep_routines): Don't add getresuid and getresgid here. * sysdeps/unix/sysv/linux/arm/Makefile [$(subdir) = misc] (sysdep_routines): Don't add setresuid and setresgid here. * sysdeps/unix/sysv/linux/cris/Makefile: Likewise. * sysdeps/unix/sysv/linux/sh/Makefile: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/Makefile: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/Makefile: Likewise. * sysdeps/unix/sysv/linux/i386/Makefile: Likewise. * sysdeps/unix/sysv/linux/m68k/Makefile: Likewise. * posix/Makefile (routines): Add them all here instead. * sysdeps/unix/sysv/linux/i386/getresuid.c (getresuid): Renamed to __getresuid. Add libc_hidden_def for that, and weak alias to old name. * sysdeps/unix/sysv/linux/i386/getresgid.c (getresgid): Renamed to __getresgid. Add libc_hidden_def for that, and weak alias to old name. * sysdeps/unix/sysv/linux/i386/setresuid.c: Add libc_hidden_def. [! __NR_setresuid]: Include generic file. * sysdeps/unix/sysv/linux/i386/setresgid.c (setresgid): Renamed to __setresgid. Add libc_hidden_def for that, and weak alias to old name. [! __NR_setresuid]: Include generic file. * sysdeps/unix/sysv/linux/syscalls.list (setresuid, setresgid): Caller is - now, not EXTRA. * sysdeps/unix/sysv/linux/sparc/sparc32/syscalls.list (setresuid, setresgid, getresuid, getresgid): Likewise. * sysdeps/unix/sysv/linux/syscalls.list (getresuid, getresgid): Add these calls here. * sysdeps/unix/sysv/linux/alpha/syscalls.list: Remove them here. * sysdeps/unix/sysv/linux/hppa/syscalls.list: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/syscalls.list: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/syscalls.list: Likewise. * sysdeps/unix/sysv/linux/x86_64/syscalls.list: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/syscalls.list: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/syscalls.list: Likewise. * sysdeps/unix/sysv/linux/mips/syscalls.list: Likewise. * sysdeps/unix/sysv/linux/ia64/syscalls.list: Likewise. * sysdeps/unix/sysv/linux/Makefile [$(subdir) = misc] (sysdep_routines): Add setfsuid and setfsgid here. * sysdeps/unix/sysv/linux/arm/Makefile: Not here. * sysdeps/unix/sysv/linux/sparc/sparc32/Makefile: Likewise. * sysdeps/unix/sysv/linux/cris/Makefile: Likewise. * sysdeps/unix/sysv/linux/sh/Makefile: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/Makefile: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/Makefile: Likewise. * sysdeps/unix/sysv/linux/i386/Makefile: Likewise. * sysdeps/unix/sysv/linux/m68k/Makefile: Likewise. * hurd/errno.c: Renamed to ... * hurd/errno-loc.c: ... this. * hurd/Makefile (routines): errno -> errno-loc
2002-10-14 01:03:16 +00:00
getresuid getresgid setresuid setresgid \
1995-02-18 01:27:10 +00:00
pathconf sysconf fpathconf \
glob glob64 fnmatch regex \
1995-02-18 01:27:10 +00:00
confstr \
update from main archive 970209 1997-02-09 02:59 Ulrich Drepper <drepper@cygnus.com> * version.h (VERSION): Bump to 2.0.2. * posix/Makefile (routines): Add getopt_init. * posix/getopt.c: Don't get environment variable with nonoption flags here. Depend on __getopt_nonoption_flags variable filled somewhere else. This is necessary since the variable must be removed even when getopt isn't used in case exec(2) gets called. * posix/getopt_init.c: New file. Initialize __getopt_nonoption_flags and remove environment variable. * sysdeps/i386/init-first.c: Call __getopt_clean_environment. * sysdeps/mach/hurd/i386/init-first.c: Likewise. * sysdeps/stub/init-first.c: Likewise. * sysdeps/unix/sysv/linux/init-first.c: Likewise. * sysdeps/generic/dl-sysdep.c (_dl_sysdep_start): Recognize AT_PAGESZ entry in auxiliary vector and store value in _dl_pagesize. * sysdeps/generic/crypt-entry.h: Return EOPNOTSUPP when DES encryption is wanted. * libio/vsnprintf.c: If MAXLEN is 0 return 0. * stdio/vsnprintf.c: Likewise. Reported by Philip Blundell <pjb27@cam.ac.uk>. 1997-02-07 17:43 Ulrich Drepper <drepper@cygnus.com> * sysdeps/generic/sysd-stdio.c: Include <errno.h>. Change PTR to void *. * sysdeps/posix/vdprintf.c: Change PTR to void *. Reported by Brian Oxley <boxley%dev.cm.ssb.com@clipper.ssb.com>. 1997-02-07 17:41 Philip Blundell <pjb27@cam.ac.uk> * sysdeps/unix/sysv/linux/socketbits.h: Fix typo. 1997-02-06 13:49 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de> * rellns-sh: No need to check for existance of first parameter. 1997-02-06 14:50 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de> * sysdeps/posix/getcwd.c (__getcwd): Fix resource leaks. Reported by David Holland <dholland@eecs.harvard.edu>. 1997-02-06 14:38 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de> * sunrpc/clnt_tcp.c (readtcp): Pass copy of timeout value to select, in case it is modified by the latter. * sunrpc/clnt_udp.c (clntudp_call): Likewise. * sunrpc/pmap_rmt.c (clnt_broadcast): Likewise. * sunrpc/svc_tcp.c (readtcp): Likewise. * sunrpc/svc_authux.c (_svcauth_unix): Fix type of area_gids array. * sunrpc/authuxprot.c (xdr_authunix_parms): Check size of uid_t and gid_t. * sunrpc/auth_unix.c (authunix_validate): Fix type of second argument. 1997-02-06 14:29 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de> * elf/Makefile (extra-objs): Don't zap previous value. * Makefile (before-compile): Likewise. Don't add gnu/lib-names.h twice. 1997-02-06 14:19 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de> * sysdeps/unix/sysv/linux/m68k/brk.c: Add workaround for braindamage (sigh!). 1997-02-06 17:10 Jim Meyering <meyering@asic.sc.ti.com> * manual/memory.texi: Correct `copystring' example for obstacks. 1997-02-06 14:10 Ulrich Drepper <drepper@cygnus.com> * Makeconfig: Don't use [:lower:] and [:upper:] in tr since old GNU tr don't grok it. 1997-02-03 21:13 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de> * sysdeps/unix/sysv/linux/socketbits.h [__GNUC__<2] (struct cmsghdr): Don't use GNU C extensions. (CMSG_DATA): Use portable definition. 1997-02-05 05:58 Ulrich Drepper <drepper@cygnus.com> * elf/ldd.bash.in: Add test for read permission and print appropriate message. Change warning and error messages to print "ldd: " at start. * elf/ldd.sh.in: Likewise. * stdlib/Makefile (routines): Add atoll. * stdlib/atoll.c: New file. * stdlib/stdlib.h: Add prototype and optimization for atoll. * stdlib/a64l.c: Update copyright. * stdlib/abs.c: Likewise. * stdlib/atof.c: Likewise. * stdlib/atoi.c: Likewise. * stdlib/atol.c: Likewise. * stdlib/bsearch.c: Likewise. * stdlib/exit.c: Likewise. * stdlib/fpioconst.c: Likewise. * stdlib/fpioconst.h: Likewise. * stdlib/jrand48.c: Likewise. * stdlib/jrand48_r.c: Likewise. * stdlib/labs.c: Likewise. * stdlib/lcong48.c: Likewise. * stdlib/lcong48_r.c: Likewise. * stdlib/llabs.c: Likewise. * stdlib/lrand48.c: Likewise. * stdlib/lrand48_r.c: Likewise. * stdlib/mblen.c: Likewise. * stdlib/mbstowcs.c: Likewise. * stdlib/mbtowc.c: Likewise. * stdlib/mp_clz_tab.c: Likewise. * stdlib/mrand48.c: Likewise. * stdlib/mrand48_r.c: Likewise. * stdlib/msort.c: Likewise. * stdlib/nrand48.c: Likewise. * stdlib/nrand48_r.c: Likewise. * stdlib/qsort.c: Likewise. * stdlib/rpmatch.c: Likewise. * stdlib/seed48.c: Likewise. * stdlib/seed48_r.c: Likewise. * stdlib/srand48.c: Likewise. * stdlib/srand48_r.c: Likewise. * stdlib/strtod.c: Likewise. * stdlib/wcstombs.c: Likewise. * stdlib/wctomb.c: Likewise. 1997-02-05 05:08 Ulrich Drepper <drepper@cygnus.com> * stdlib/mp_clz_tab.c (__clz_tab): Follow change in GMP and define as const. 1997-02-04 23:57 Fila Kolodny <fila@ibi.com> * sysdeps/unix/sysv/linux/socketbits.h: Define __need_NULL before including <stddef.h>. 1997-02-03 20:01 H.J. Lu <hjl@gnu.ai.mit.edu> * time/Makefile (tzbases, tzlinks): New. (tzfiles): Changed to $(tzbases) $(tzlinks). ($(tzfiles:%=$(objpfx)z.%): Make $(tzlinks) depend on $(tzbases). 1997-02-02 12:13 H.J. Lu <hjl@gnu.ai.mit.edu> * Makefile (install): Ignore error from ldconfig. * time/zic.c (mkdirs): Double check the error return of mkdir (). 1997-02-04 22:01 Ulrich Drepper <drepper@cygnus.com> * stdio-common/vfprintf.c: Prepare to use __va_copy for architectures like PPC where va_list is no integral type. 1997-02-04 15:27 Roma Ekzhanov <ekzhanov@paragraph.com> * posix/getopt.c (exchange): Don't allocate nonoption_flags array if nonoption_flags_len == -1.
1997-02-10 03:19:57 +00:00
getopt getopt1 getopt_init \
Sun Apr 28 14:14:35 1996 Roland McGrath <roland@delasyd.gnu.ai.mit.edu> * sysdeps/unix/sysv/linux/i386/Makefile: New file. Wed Apr 24 17:35:30 Ulrich Drepper <drepper@cygnus.com> * inet/netinet/in.h, socket/sys/socket.h: Move to sysdeps/generic/netinet/in.h, sysdeps/generic/sys/socket.h. * netinet/in.h, sys/socket.h: Remove file. * misc/Makefile (routines): Add fdatasync. * posix/Makefile (headers): Add sched.h. (routines): Add nanosleep, sched_setp, sched_getp, sched_sets, sched_gets, sched_yield, sched_primax, sched_primin, sched_rr_gi. * posix/getconf.c (vars): Add entries for _POSIX_REALTIME_SIGNALS, _POSIX_PRIORITY_SCHEDULING, _POSIX_TIMERS, _POSIX_ASYNCHRONOUS_IO, _POSIX_PRIORITIZED_IO, _POSIX_SYNCHRONIZED_IO, _POSIX_FSYNC, _POSIX_MAPPED_FILES, _POSIX_MEMLOCK, _POSIX_MEMLOCK_RANGE, _POSIX_MEMORY_PROTECTION, _POSIX_MESSAGE_PASSING, _POSIX_SEMAPHORES, _POSIX_SHARED_MEMORY_OBJECTS. * posix/sched.h: New file. Header for POSIX scheduling interface. * posix/unistd.h: Describe options from POSIX.4. Add declaration of fdatasync. * sysdeps/generic/confname.h: Add definition for _SC_REALTIME_SIGNALS, _SC_PRIORITY_SCHEDULING, _SC_TIMERS, _SC_ASYNCHRONOUS_IO, _SC_PRIORITIZED_IO, _SC_SYNCHRONIZED_IO, _SC_FSYNC, _SC_MAPPED_FILES, _SC_MEMLOCK, _SC_MEMLOCK_RANGE, _SC_MEMORY_PROTECTION, _SC_MESSAGE_PASSING, _SC_SEMAPHORES, _SC_SHARED_MEMORY_OBJECTS. * sysdeps/generic/fdatasync.c: New file. Default implementation simply uses fsync. * sysdeps/generic/netinit/in.h: Moved to here from inet/netinet/in.h. * sysdeps/generic/schedbits.h: New file. System dependent defintion for POSIX.4 scheduling interface. * sysdeps/generic/sys/socket.h: Moved to here from socket/sys/socket.h. * sysdeps/stub/nanosleep.c, sysdeps/stub/sched_getp.c, sysdeps/stub/sched_gets.c, sysdeps/stub/sched_primax.c, sysdeps/stub/sched_primin.c, sysdeps/stub/sched_rr_gi.c, sysdeps/stub/sched_setp.c, sysdeps/stub/sched_sets.c, sysdeps/stub/sched_yield.c: New file: Stub implementation for systems missing these POSIX.4 system calls. * sysdeps/unix/sysv/linux/gnu/types.h, sysdeps/unix/sysv/linux/ioctls.h: Use kernel header for data type definitions. * sysdeps/unix/sysv/linux/netinet/in.h: New file. Linux specific version. * sysdeps/unix/sysv/linux/posix_opt.h: New file. Define POSIX options applicable for Linux. * sysdeps/unix/sysv/linux/syscalls.list: Add definitions for fdatasync, nanosleep, sched_setparam, sched_getparam, sched_setscheduler, sched_getscheduler, sched_yield, sched_get_priority_max, sched_get_priority_min, and sched_rr_get_interval. * sysdeps/unix/sysv/linux/sysconf.c: Add handling of POSIX.4 options. * sysdeps/unix/sysv/linux/termbits.h: Use kernel headers. * time/sys/time.h: Remove definition of `struct timespec'. * time/time.h (struct timespec): Move definition to here. variable, LUCKY, to use instead of setting D to -1 (which fouls
1996-04-28 18:25:22 +00:00
sched_setp sched_getp sched_sets sched_gets sched_yield sched_primax \
sched_primin sched_rr_gi sched_getaffinity sched_setaffinity \
Update. 1997-09-30 18:03 Ulrich Drepper <drepper@cygnus.com> * Makerules: Undo last change. * csu/Makefile: Define before-compile at the right place. * aclocal.m4: Remove a.out file created by assembler test. * set-init.c: Find set-hooks.h using <...>. Update to db 2.3.10. * db2/Makefile: Update. * db2/db.h: Likewise. * db2/db_185.h: Likewise. * db2/db_int.h: Likewise. * db2/btree/bt_close.c: Likewise. * db2/btree/bt_conv.c: Likewise. * db2/btree/bt_cursor.c: Likewise. * db2/btree/bt_put.c: Likewise. * db2/btree/bt_rec.c: Likewise. * db2/btree/bt_recno.c: Likewise. * db2/btree/btree.src: Likewise. * db2/btree/btree_auto.c: Likewise. * db2/clib/getlong.c: Likewise. * db2/db/db.c: Likewise. * db2/db/db_auto.c: Likewise. * db2/db/db_conv.c: Likewise. * db2/db/db_pr.c: Likewise. * db2/db/db_ret.c: Likewise. * db2/db/db_thread.c: Likewise. * db2/hash/hash.c: Likewise. * db2/hash/hash_auto.c: Likewise. * db2/hash/hash_conv.c: Likewise. * db2/hash/hash_dup.c: Likewise. * db2/hash/hash_func.c: Likewise. * db2/hash/hash_page.c: Likewise. * db2/hash/hash_rec.c: Likewise. * db2/include/btree.h: Likewise. * db2/include/btree_ext.h: Likewise. * db2/include/db.h.src: Likewise. * db2/include/db_185.h.src: Likewise. * db2/include/db_cxx.h: Likewise. * db2/include/db_ext.h: Likewise. * db2/include/db_int.h.src: Likewise. * db2/include/db_page.h: Likewise. * db2/include/db_shash.h: Likewise. * db2/include/lock.h: Likewise. * db2/include/log.h: Likewise. * db2/include/log_ext.h: Likewise. * db2/include/mp.h: Likewise. * db2/include/shqueue.h: Likewise. * db2/include/txn.h: Likewise. * db2/lock/lock.c: Likewise. * db2/lock/lock_deadlock.c: Likewise. * db2/log/log.c: Likewise. * db2/log/log_archive.c: Likewise. * db2/log/log_auto.c: Likewise. * db2/log/log_get.c: Likewise. * db2/log/log_put.c: Likewise. * db2/log/log_register.c: Likewise. * db2/mp/mp_bh.c: Likewise. * db2/mp/mp_fget.c: Likewise. * db2/mp/mp_fopen.c: Likewise. * db2/mp/mp_fput.c: Likewise. * db2/mp/mp_fset.c: Likewise. * db2/mp/mp_open.c: Likewise. * db2/mutex/mutex.c: Likewise. * db2/os/db_os_dir.c: Likewise. * db2/progs/db_checkpoint/db_checkpoint.c: Likewise. * db2/progs/db_deadlock/db_deadlock.c: Likewise. * db2/progs/db_dump185/db_dump185.c: Likewise. * db2/progs/db_load/db_load.c: Likewise. * db2/progs/db_recover/db_recover.c: Likewise. * db2/txn/txn.c: Likewise. * db2/txn/txn_auto.c: Likewise. * elf/link.h: Define struct libname_list outside struct link_map to not confuse C++ compilers. * include/features.h: Recognize _XOPEN_SOURCE == 500 and set __USE_UNIX98. * manual/creature.texi: Explain this. * libc.map: Add new functions. * libio/Makefile (routines): Add fseeko and ftello. * libio/ftello.c: New file. * libio/fseeko.c: New file. * libio/stdio.h: Add prototypes for new functions. * manual/stdio.texi: Document fseeko and ftello. * posix/Makefile (routines): Add pread and pwrite. * sysdeps/posix/pread.c: New file. * sysdeps/posix/pwrite.c: New file. * sysdeps/stub/pread.c: New file. * sysdeps/stub/pwrite.c: New file. * posix/unistd.h: Add prototypes for pread and pwrite. Pretty print header. Define gid_t, uid_t, off_t, pid_t if __USE_UNIX98. Declare ctermid and cuserid if __USE_UNIX98. (swab): Change to take void * arguments. * string/swab.c: Change parameter to void *. * posix/sys/types: Define gid_t, uid_t, off_t, pid_t only if not already happened. * manual/llio.texi: Document pread and pwrite. * string/strings.h: Don't simply include string.h. Define BSD functions according to Unix98. * stdlib/tst-strtol.c: Include <string.h> not <strings.h>. * sunrpc/clnt_simp.c: Likewise. * malloc/Makefile (aux): Add set-freeres. * malloc/mtrace.c: Define function release_libc_mem which calls the __libc_subfreeres handler. (mtrace): Register release_libc_mem. * malloc/set-freeres.c: New file. * intl/dcgettext.c: Define free_mem function and add to __libc_subfreeres list. * intl/finddomain.c: Likewise. * intl/gettextP.h (struct loaded_domain): Add new fields use_mmap and mmap_size. Add prototype for _nl_unloaded_domain. * intl/loadmsgcat.c: Define new function _nl_unload_domain. (_nl_load_domain): Store informaiton about mmap use and file size. * intl/localealias.c (read_alias_file): Optimize locale alias file reading by avoid frequen mallocs. Define free_mem function and add to __libc_subfreeres list. * locale/localeinfo.h: Make a difference between MAX_USAGE_COUNT and undeletable. Add prototype for _nl_unload_locale. * locale/C-collate: Mark data as undeletable by using UNDELETABLE. * locale/C-ctype: Likewise. * locale/C-messages: Likewise. * locale/C-monetary: Likewise. * locale/C-numeric: Likewise. * locale/C-time: Likewise. * locale/findlocale.c (_nl_find_locale, _nl_remove_locale): Handle MAX_USAGE_COUNT and UNDELETABLE. (free_mem): New function. Add it to __libc_subfreeres list. * locale/loadlocale.c: Define _nl_unload_locale function. * misc/hsearch.c: Register hdestroy in __libc_subfreeres list. * stdlib/fmtmsg.c (addseverity): Handle illegal severity arguments correctly Define free_mem function and add to __libc_subfreeres list. * locale/programs/localedef.c (options): short form os verbose is v. Reported by Andreas Jaeger. * misc/sys/select.h: Define pselect only is __USE_POSIX since this header is used in some others as well for historical reasons. * resolv/resolv.h: Include <netinet/in.h> to make self-contained. * string/bits/string2.h: Add missing braces and optimize strcmp a bit more. * sysdeps/i386/i486/bits/string.h: Likewise. * sunrpc/rpc/auth_des.h: Include rpc/auth.h to be self-contained. Pretty print. * sysdeps/mach/hurd/cthreads.c: Add copyright text. * sysdeps/unix/sysv/linux/syscalls.list: Correct prctl entry. * sysdeps/unix/sysv/linux/sys/mman.h: Get definition of size_t. * time/time.h: Pretty print. 1997-09-29 Paul Eggert <eggert@twinsun.com> * time/strftime.c: Synchronize with GNU Emacs strftime.c. (HAVE_MEMCPY): Define if emacs is defined and HAVE_BCOPY isn't. (gmtime_r, localtime_r): Undef before defining. (iso_week_days): Use __inline__, not inline. 1997-09-27 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de> * sysdeps/m68k/fpu/bits/mathinline.h: Rename exp2{,l,f} to __ieee754_exp2{,l,f}. * sysdeps/m68k/fpu/s_exp2.c: Likewise. * sysdeps/m68k/fpu/s_exp2l.c: Likewise. * sysdeps/m68k/fpu/s_exp2f.c: Likewise. 1997-09-27 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de> * elf/soinit.c (__EH_FRAME_BEGIN__): Don't make the .eh_frame section read-only, it contains relocations. * elf/sofini.c (__FRAME_END__): Likewise. 1997-09-29 03:08 Ulrich Drepper <drepper@cygnus.com> * sysdeps/i386/i486/bits/string.h [__PIC__] (__strspn_cg, __strcspn_cg, __strpbrk_cg, __strstr_cg): Optimize even more. No spill register needed. Patch by NIIBE Yutaka <gniibe@mri.co.jp>. 1997-09-28 08:27 Thorsten Kukuk <kukuk@vt.uni-paderborn.de> * nis/nis_call.c (__do_niscall2): Fix return code, add missing break in switch case. * nis/nis_mkdir.c: Fix return codes to match Solaris version. * nis/nis_rmdir.c: Likewise. * nis/rpcsvc/yp_prot.h: Rename struct keydat to struct keydat_t for C++. 1997-09-28 04:32 Ulrich Drepper <drepper@cygnus.com> * configure.in: Fix typo. Patch by Zack Weinberg <zack@rabi.phys.columbia.edu>. 1997-09-25 20:14 Philip Blundell <Philip.Blundell@pobox.com> * sysdeps/unix/sysv/linux/scsi/sg.h: New file. * sysdeps/unix/sysv/linux/Makefile: Install <scsi/sg.h>.
1997-09-30 17:10:40 +00:00
getaddrinfo gai_strerror wordexp \
Update. 2000-04-15 Ulrich Drepper <drepper@redhat.com> * posix/Makefile (headers): Add spawn.h. (distribute): Add spawn_int.h. (routines): Add spawn_faction_init, spawn_faction_destroy, spawn_faction_addclose, spawn_faction_addopen, spawn_faction_adddup2, spawnattr_init, spawnattr_destroy, spawnattr_getdefault, spawnattr_setdefault, spawnattr_getflags, spawnattr_setflags, spawnattr_getpgroup, spawnattr_setpgroup, spawn, spawnp, and spawni. * posix/Versions [libc] (GLIBC_2.2): Add posix_spawn_file_actions_init, posix_spawn_file_actions_destroy, posix_spawn_file_actions_addclose, posix_spawn_file_actions_addopen, posix_spawn_file_actions_adddup2, posix_spawnattr_init, posix_spawnattr_destroy, posix_spawnattr_getdefault, posix_spawnattr_setdefault, posix_spawnattr_getflags, posix_spawnattr_setflags, posix_spawnattr_getpgroup, posix_spawnattr_setpgroup, posix_spawn, and posix_spawnp. * posix/spawn.c: New file. * posix/spawn.h: New file. * posix/spawn_faction_addclose.c: New file. * posix/spawn_faction_adddup2.c: New file. * posix/spawn_faction_addopen.c: New file. * posix/spawn_faction_destroy.c: New file. * posix/spawn_faction_init.c: New file. * posix/spawn_int.h: New file. * posix/spawnattr_destroy.c: New file. * posix/spawnattr_getdefault.c: New file. * posix/spawnattr_getflags.c: New file. * posix/spawnattr_getpgroup.c: New file. * posix/spawnattr_getschedparam.c: New file. * posix/spawnattr_getschedpolicy.c: New file. * posix/spawnattr_getsigmask.c: New file. * posix/spawnattr_init.c: New file. * posix/spawnattr_setdefault.c: New file. * posix/spawnattr_setflags.c: New file. * posix/spawnattr_setpgroup.c: New file. * posix/spawnattr_setschedparam.c: New file. * posix/spawnattr_setschedpolicy.c: New file. * posix/spawnattr_setsigmask.c: New file. * posix/spawni.c: New file. * posix/spawnp.c: New file. * sysdeps/mach/hurd/bits/posix_opt.h: Add _POSIX_SPAWN. * sysdeps/unix/sysv/linux/bits/posix_opt.h: Likewise.
2000-04-15 16:51:16 +00:00
pread pwrite pread64 pwrite64 \
spawn_faction_init spawn_faction_destroy spawn_faction_addclose \
spawn_faction_addopen spawn_faction_adddup2 \
spawnattr_init spawnattr_destroy \
spawnattr_getdefault spawnattr_setdefault \
spawnattr_getflags spawnattr_setflags \
Update. * crypt/Makefile (distribute): Add ufc-crypt.h, crypt-private.h, ufc.c, speeds.c, README.ufc-crypt, and Banner. * sysdeps/sparc/Subdirs: New file. * locale/Makefile (distribute): Add weightwc.h and programs/localedef.h. * time/Makefile (distribute): Add datemsk. * sysdeps/ia64/Dist: Add softpipe.h. * sysdeps/unix/sysv/aix/Dist: New file. * posix/setpgrp.c: Moved to... * sysdeps/generic/setpgrp.c: ...here. New file. * io/mknod.c: Moved to... * sysdeps/generic/mknod.c: ...here. New file. * sysdeps/unix/sysv/linux/ia64/Dist: New file. * sysdeps/unix/sysv/linux/sparc/Dist: Add sys/procfs.h. * sysdeps/unix/sysv/linux/arm/Dist: Add oldgetrlimit64.c. * sysdeps/powerpc/Dist: Add fprrest.S, fprsave.S, gprsave1.S, gprsave0.S, gprrest1.S, and gprrest0.S. * sysdeps/generic/Dist: Add bp-thunks.h, bp-sym.h, and bp-start.h. * posix/Makefile (routines): Add spawnattr_getsigmask, spawnattr_getschedpolicy, spawnattr_getschedparam, spawnattr_setsigmask, spawnattr_setschedpolicy, and spawnattr_setschedparam. * posix/Versions: Add posix_spawnattr_getschedpolicy, posix_spawnattr_setschedpolicy, posix_spawnattr_getschedparam, and posix_spawnattr_setschedparam. * posix/spawnattr_setschedparam.c: Fix typo. * posix/spawnattr_setsigmask.c (posix_spawnattr_setsigmask): Correct typo. * login/programs/utmpd.c: Removed. * login/programs/utmpd.h: Removed. * login/programs/utmpd-private.h: Removed. * Makefile (distribute): Add include/db_185.h and include/db.h. * iconvdata/Makefile (distribute): Add iso-ir-165.c and iso-ir-165.h. * elf/Makefile (distribute): Add missing files. * dlfcn/Makefile: Add back rules to include eval in libdl.so. * elf/eval.c: Moved to... * dlfcn/eval.c: ...here. New file. * Makefile (distribute): Also distribute ChangeLog.1?.
2000-06-14 00:55:24 +00:00
spawnattr_getpgroup spawnattr_setpgroup spawn spawnp spawni \
spawnattr_getsigmask spawnattr_getschedpolicy spawnattr_getschedparam \
2003-08-16 06:21:46 +00:00
spawnattr_setsigmask spawnattr_setschedpolicy spawnattr_setschedparam \
posix_madvise \
get_child_max sched_cpucount sched_cpualloc sched_cpufree
Sun Apr 28 14:14:35 1996 Roland McGrath <roland@delasyd.gnu.ai.mit.edu> * sysdeps/unix/sysv/linux/i386/Makefile: New file. Wed Apr 24 17:35:30 Ulrich Drepper <drepper@cygnus.com> * inet/netinet/in.h, socket/sys/socket.h: Move to sysdeps/generic/netinet/in.h, sysdeps/generic/sys/socket.h. * netinet/in.h, sys/socket.h: Remove file. * misc/Makefile (routines): Add fdatasync. * posix/Makefile (headers): Add sched.h. (routines): Add nanosleep, sched_setp, sched_getp, sched_sets, sched_gets, sched_yield, sched_primax, sched_primin, sched_rr_gi. * posix/getconf.c (vars): Add entries for _POSIX_REALTIME_SIGNALS, _POSIX_PRIORITY_SCHEDULING, _POSIX_TIMERS, _POSIX_ASYNCHRONOUS_IO, _POSIX_PRIORITIZED_IO, _POSIX_SYNCHRONIZED_IO, _POSIX_FSYNC, _POSIX_MAPPED_FILES, _POSIX_MEMLOCK, _POSIX_MEMLOCK_RANGE, _POSIX_MEMORY_PROTECTION, _POSIX_MESSAGE_PASSING, _POSIX_SEMAPHORES, _POSIX_SHARED_MEMORY_OBJECTS. * posix/sched.h: New file. Header for POSIX scheduling interface. * posix/unistd.h: Describe options from POSIX.4. Add declaration of fdatasync. * sysdeps/generic/confname.h: Add definition for _SC_REALTIME_SIGNALS, _SC_PRIORITY_SCHEDULING, _SC_TIMERS, _SC_ASYNCHRONOUS_IO, _SC_PRIORITIZED_IO, _SC_SYNCHRONIZED_IO, _SC_FSYNC, _SC_MAPPED_FILES, _SC_MEMLOCK, _SC_MEMLOCK_RANGE, _SC_MEMORY_PROTECTION, _SC_MESSAGE_PASSING, _SC_SEMAPHORES, _SC_SHARED_MEMORY_OBJECTS. * sysdeps/generic/fdatasync.c: New file. Default implementation simply uses fsync. * sysdeps/generic/netinit/in.h: Moved to here from inet/netinet/in.h. * sysdeps/generic/schedbits.h: New file. System dependent defintion for POSIX.4 scheduling interface. * sysdeps/generic/sys/socket.h: Moved to here from socket/sys/socket.h. * sysdeps/stub/nanosleep.c, sysdeps/stub/sched_getp.c, sysdeps/stub/sched_gets.c, sysdeps/stub/sched_primax.c, sysdeps/stub/sched_primin.c, sysdeps/stub/sched_rr_gi.c, sysdeps/stub/sched_setp.c, sysdeps/stub/sched_sets.c, sysdeps/stub/sched_yield.c: New file: Stub implementation for systems missing these POSIX.4 system calls. * sysdeps/unix/sysv/linux/gnu/types.h, sysdeps/unix/sysv/linux/ioctls.h: Use kernel header for data type definitions. * sysdeps/unix/sysv/linux/netinet/in.h: New file. Linux specific version. * sysdeps/unix/sysv/linux/posix_opt.h: New file. Define POSIX options applicable for Linux. * sysdeps/unix/sysv/linux/syscalls.list: Add definitions for fdatasync, nanosleep, sched_setparam, sched_getparam, sched_setscheduler, sched_getscheduler, sched_yield, sched_get_priority_max, sched_get_priority_min, and sched_rr_get_interval. * sysdeps/unix/sysv/linux/sysconf.c: Add handling of POSIX.4 options. * sysdeps/unix/sysv/linux/termbits.h: Use kernel headers. * time/sys/time.h: Remove definition of `struct timespec'. * time/time.h (struct timespec): Move definition to here. variable, LUCKY, to use instead of setting D to -1 (which fouls
1996-04-28 18:25:22 +00:00
Sun Feb 19 17:46:13 1995 Roland McGrath <roland@duality.gnu.ai.mit.edu> * posix/Makefile (aux): Add environ. * posix/environ.c: New file. * sysdeps/unix/sparc/start.c: Remove __environ definition. * sysdeps/unix/start.c: Likewise. * sysdeps/unix/sysv/irix4/start.c: Likewise. * sysdeps/mach/hurd/start.c: Likewise. * sysdeps/mach/start.c: Likewise. * sysdeps/stub/start.c: Likewise. * sysdeps/unix/make_errlist.c: In produced program, test HAVE_WEAK_SYMBOLS instead of HAVE_GNU_LD. * sysdeps/unix/sysv/sysv4/dup2.c: Fix #include of renamed file. Remove extra weak alias. * sysdeps/unix/sysv/sysv4/sigaltstack.S: Fix unsquashed file name in #include. * libc-symbols.h: Put comment around ^L to pacify Solaris as. * sysdeps/posix/Makefile (cded-objdir-includes): New variable replaced cded-objdir-CPPFLAGS; transform $(+includes) instead of $(CPPFLAGS). (mk-stdiolim): Use it instead. * mach/mach_init.c (__vm_page_size): Make it initialized. It does not work to make a weak alias to a bss symbol. * stdio/Makefile (distribute): Remove mpn-copy.mk; add gen-mpn-copy. (tests): Add test-fwrite. * stdio/test-fwrite.c: New file. * stdlib/stdlib.h [__USE_GNU]: Declare strtof, strtold, __strtof, __strtold. * Makefile (autoconf-it): New canned sequence. Do cvs commit if there is a CVS directory. (configure, %/configure): Use $(autoconf-it) for cmds. * Make-dist: Likewise. * Makerules ($(gpl2lgpl)): Likewise. inlines cause trouble for files defining global register variables. * stdio/vfprintf.c: Set PREC to zero for %. without following digit.
1995-02-20 01:08:14 +00:00
aux := init-posix environ
1999-03-19 Andreas Jaeger <aj@arthur.rhein-neckar.de> * rt/Makefile: Link against static library if no shared lib is available. * localedata/Makefile: The shells scripts implementing the test require the dynamic linker which is not available with --disable-shared. Skip the test if --disable-shared is given. * linuxthreads/Makefile: Link test against static libpthread if no shared lib is available. * iconvdata/Makefile (tests): Run iconv-test only if we're building shared libraries. * elf/Makefile (tests): Likewise for elf tests. * posix/Makefile: The test frameworks globtest and wordexp-test require the dynamic linker which is not available with --disable-shared. Skip the test if --disable-shared is given. * grp/Makefile (otherlibs): For static nss build link against necessary libs. * rt/Makefile: Link against static library if no shared lib is available. * localedata/Makefile: The shells scripts implementing the test require the dynamic linker which is not available with --disable-shared. Skip the test if --disable-shared is given. * linuxthreads/Makefile: Link test against static libpthread if no shared lib is available. * iconvdata/Makefile (tests): Run iconv-test only if we're building shared libraries. * elf/Makefile (tests): Likewise for elf tests. * posix/Makefile: The test frameworks globtest and wordexp-test require the dynamic linker which is not available with --disable-shared. Skip the test if --disable-shared is given. * grp/Makefile (otherlibs): For static nss build link against necessary libs. 1999-03-19 Andreas Jaeger <aj@arthur.rhein-neckar.de>
1999-03-20 17:16:44 +00:00
tests := tstgetopt testfnm runtests runptests \
tst-preadwrite tst-preadwrite64 test-vfork regexbug1 \
tst-getlogin tst-mmap tst-getaddrinfo tst-truncate \
tst-truncate64 tst-fork tst-fnmatch tst-regexloc tst-dir \
tst-chmod bug-regex1 bug-regex2 bug-regex3 bug-regex4 \
tst-gnuglob tst-regex bug-regex5 bug-regex6 bug-regex7 \
bug-regex8 bug-regex9 bug-regex10 bug-regex11 bug-regex12 \
bug-regex13 bug-regex14 bug-regex15 bug-regex16 \
bug-regex17 bug-regex18 bug-regex19 bug-regex20 \
bug-regex21 bug-regex22 bug-regex23 bug-regex24 \
bug-regex25 bug-regex26 bug-regex27 bug-regex28 \
bug-regex29 bug-regex30 bug-regex31 bug-regex32 \
bug-regex33 tst-nice tst-nanosleep tst-regex2 \
transbug tst-rxspencer tst-pcre tst-boost \
bug-ga1 tst-vfork1 tst-vfork2 tst-vfork3 tst-waitid \
2010-03-24 19:10:51 +00:00
tst-getaddrinfo2 bug-glob1 bug-glob2 bug-glob3 tst-sysconf \
tst-execvp1 tst-execvp2 tst-execlp1 tst-execlp2 \
tst-execv1 tst-execv2 tst-execl1 tst-execl2 \
tst-execve1 tst-execve2 tst-execle1 tst-execle2 \
tst-execvp3 tst-execvp4 tst-rfc3484 tst-rfc3484-2 \
tst-rfc3484-3 \
2010-04-08 05:59:40 +00:00
tst-getaddrinfo3 tst-fnmatch2 tst-cpucount tst-cpuset \
bug-getopt1 bug-getopt2 bug-getopt3 bug-getopt4 \
bug-getopt5 tst-getopt_long1 bug-regex34 bug-regex35 \
tst-pathconf tst-getaddrinfo4 tst-rxspencer-no-utf8 \
tst-fnmatch3 bug-regex36 tst-getaddrinfo5
xtests := bug-ga2
1999-03-19 Andreas Jaeger <aj@arthur.rhein-neckar.de> * rt/Makefile: Link against static library if no shared lib is available. * localedata/Makefile: The shells scripts implementing the test require the dynamic linker which is not available with --disable-shared. Skip the test if --disable-shared is given. * linuxthreads/Makefile: Link test against static libpthread if no shared lib is available. * iconvdata/Makefile (tests): Run iconv-test only if we're building shared libraries. * elf/Makefile (tests): Likewise for elf tests. * posix/Makefile: The test frameworks globtest and wordexp-test require the dynamic linker which is not available with --disable-shared. Skip the test if --disable-shared is given. * grp/Makefile (otherlibs): For static nss build link against necessary libs. * rt/Makefile: Link against static library if no shared lib is available. * localedata/Makefile: The shells scripts implementing the test require the dynamic linker which is not available with --disable-shared. Skip the test if --disable-shared is given. * linuxthreads/Makefile: Link test against static libpthread if no shared lib is available. * iconvdata/Makefile (tests): Run iconv-test only if we're building shared libraries. * elf/Makefile (tests): Likewise for elf tests. * posix/Makefile: The test frameworks globtest and wordexp-test require the dynamic linker which is not available with --disable-shared. Skip the test if --disable-shared is given. * grp/Makefile (otherlibs): For static nss build link against necessary libs. 1999-03-19 Andreas Jaeger <aj@arthur.rhein-neckar.de>
1999-03-20 17:16:44 +00:00
ifeq (yes,$(build-shared))
Update. 1997-09-21 03:19 Ulrich Drepper <drepper@cygnus.com> * libio/libio.h: More libstdc++ cleanups. Define _IO_USE_DTOA if _G_HAVE_PRINTF_FP is not defined. * libio/strops.c: Undo patch of 1997-07-08 02:18. Must find a different solution for the problem. * misc/search.h [__USE_GNU]: Define comparison_fn_t. * stdlib/stdlib.h: Define comparison_fn_t only if __COMPAR_FN_T is not defined. Fix typo. Pretty print inline functions. * sysdeps/i386/i486/string.h (__stpcpy_small): Increment __cp not cp. Patch by HJ Lu <hjl@gnu.ai.mit.edu>. 1997-09-20 16:45 Ulrich Drepper <drepper@cygnus.com> * hesiod/hesiod.c (hesiod_init): Use __secure_getenv to get HES_DOMAIN environment variable. Suggested by Mark Kettenis <kettenis@phys.uva.nl>. * hesiod/README.hesiod: A bit of information about Hesiod and how to use it. Written by Mark Kettenis <kettenis@phys.uva.nl>. 1997-09-20 05:15 Ulrich Drepper <drepper@cygnus.com> * manual/maint.texi: Update requirement list. * io/ftw.h: Don't use parameter names from global namespace in prototypes. * stdlib/strtol.c: If used outside glibc handle broken systems which have character classification functions which are not 8-bit clean gracefully. Patch by Bruno Haible <haible@ilog.fr>. 1997-09-19 21:42 David S. Miller <davem@tanya.rutgers.edu> * sysdeps/unix/sysv/linux/sparc/sparc64/bits/types.h: ssize_t is a long long int. 1997-09-19 15:12 H.J. Lu <hjl@gnu.ai.mit.edu> * posix/Makefile (test-srcs): New, set to globtest. 1997-09-20 00:24 Ulrich Drepper <drepper@cygnus.com> * manual/filesys.texi: Document ftw, nftw and needed data types. 1997-09-19 12:53 H.J. Lu <hjl@gnu.ai.mit.edu> * sysdeps/i386/i486/bits/string.h: Fix typo. 1997-09-19 14:11 Ulrich Drepper <drepper@cygnus.com> * io/ftwtest.c (cb): Print level. * io/ftwtest-sh: Updated for ftwtest.c change. * string/argz.h (__argz_next): Cast NULL to char * to satisfy C++ compilers. Reported by Mirko Streckenbach <mirko@ramz.ing.tu-bs.de>. * catgets/catgets.c (catopen): Correctly allocate string of nlspath. Reported by Charles C. Fu <ccwf@klab.caltech.edu>. 1997-09-18 13:30 Klaus Espenlaub <kespenla@student.informatik.uni-ulm.de> * sysdeps/i386/init-first.c: Call __getopt_clean_environment with additional argument. * sysdeps/mach/hurd/i386/init-first.c: Likewise. * sysdeps/mach/hurd/mips/init-first.c: Likewise. * sysdeps/stub/init-first.c: Likewise. 1997-09-18 03:16 Ulrich Drepper <drepper@cygnus.com> * manual/search.texi: Document lsearch, lfind, the hsearch and tsearch functions. 1997-09-18 00:04 Ulrich Drepper <drepper@cygnus.com> * misc/hsearch_r.c (hsearch_r): Only return error for ENTER action if the table is full and we *really* have to enter a new entry. 1997-09-17 19:44 Ulrich Drepper <drepper@cygnus.com> * sysdeps/sparc/sparc32/dl-machine.h (elf_machine_rela): Get rid of hack for handling flush opcode. Patch by Richard Henderson <rth@cygnus.com>.
1997-09-21 01:47:02 +00:00
test-srcs := globtest
tests += wordexp-test tst-exec tst-spawn
1999-03-19 Andreas Jaeger <aj@arthur.rhein-neckar.de> * rt/Makefile: Link against static library if no shared lib is available. * localedata/Makefile: The shells scripts implementing the test require the dynamic linker which is not available with --disable-shared. Skip the test if --disable-shared is given. * linuxthreads/Makefile: Link test against static libpthread if no shared lib is available. * iconvdata/Makefile (tests): Run iconv-test only if we're building shared libraries. * elf/Makefile (tests): Likewise for elf tests. * posix/Makefile: The test frameworks globtest and wordexp-test require the dynamic linker which is not available with --disable-shared. Skip the test if --disable-shared is given. * grp/Makefile (otherlibs): For static nss build link against necessary libs. * rt/Makefile: Link against static library if no shared lib is available. * localedata/Makefile: The shells scripts implementing the test require the dynamic linker which is not available with --disable-shared. Skip the test if --disable-shared is given. * linuxthreads/Makefile: Link test against static libpthread if no shared lib is available. * iconvdata/Makefile (tests): Run iconv-test only if we're building shared libraries. * elf/Makefile (tests): Likewise for elf tests. * posix/Makefile: The test frameworks globtest and wordexp-test require the dynamic linker which is not available with --disable-shared. Skip the test if --disable-shared is given. * grp/Makefile (otherlibs): For static nss build link against necessary libs. 1999-03-19 Andreas Jaeger <aj@arthur.rhein-neckar.de>
1999-03-20 17:16:44 +00:00
endif
tests-static = tst-exec-static tst-spawn-static
tests += $(tests-static)
1995-02-18 01:27:10 +00:00
others := getconf
install-bin := getconf
install-others-programs := $(inst_libexecdir)/getconf
1995-02-18 01:27:10 +00:00
before-compile += testcases.h ptestcases.h $(objpfx)posix-conf-vars-def.h
Update. 1997-03-08 05:30 Ulrich Drepper <drepper@cygnus.com> * argp/Makefile (routines): Add argp-eexst. * argp/argp-ba.c (argp_program_bug_address): Make `const'. * argp/argp-eexst.c: New file. Define exit status variable. * argp/argp-help.c (__argp_state_help): Use argp_err_exit_status variable instead of always exiting with value 1. * argp/argp-pv.c (argp_program_version): Make `const'. * argp/argp.h: Declare argp_err_exit_status. Patches by Miles Bader <miles@gnu.ai.mit.edu>. * locale/programs/localedef.c: Use argp_err_exit_status to terminate with correct value. * inet/rcmd.c (iruserok): Use euidaccess instead of half-hearted switching of UID before opening .rhosts. * libio/vsnprintf.c: Change implementation to follow ISO C 9X proposal. The return value now is always the number of characters which would be written if enough space is available. * manual/stdio.texi: Update description for new behaviour. * locale/locale.h (__locale_t): Don't use __locale_t for struct name and pointer to struct since old gccs cannot keep the namespaces apart. Rename struct to __locale_struct. * locale/duplocale.h: Likewise. * locale/newlocale.h: Likewise. * math/Makefile (headers): Add complex.h and cmathcalls.h. (routines): Remove w_cabs. Add conj, cimag, creal, and cabs. * math/math.h: Undefine __MATHDECL_1, __MATHDECL, and __MATHCALL after use. (signgam): Move declaration to here from mathcalls.h. * math/mathcalls.h (cabs, __cabs_complex, signgam): Remove definition. Correct comment for fmin and fmax. Start implementing complex math function from ISO C 9X. * math/complex.h: New file. * math/cmathcalls.h: New file. * math/cabs.c: New file. * math/cabsf.c: New file. * math/cabsl.c: New file. * math/cimag.c: New file. * math/cimagf.c: New file. * math/cimagl.c: New file. * math/conj.c: New file. * math/conjf.c: New file. * math/conjl.c: New file. * math/creal.c: New file. * math/crealf.c: New file. * math/creall.c: New file. * sysdeps/libm-ieee754/w_cabs.c: Removed. * sysdeps/libm-ieee754/w_cabsf.c: Removed. * sysdeps/libm-ieee754/w_cabsl.c: Removed. * posix/regex.c: Merge with regex sources from Arnold Robbins' version in GNU awk. * posix/regex.h: Likewise. Add regex test suite by Tom Lord. * posix/Makefile (distribute): Add TESTS, TESTS2C.sed, and testcases.h. (tests): Add runtests. (before-compile): Add testcases.h. (testcases.h): New rule to generate header with tests. * posix/TESTS: New file. * posix/TESTS2C.sed.: New file. * posix/runtests.c: New file. * posix/testcases.h: New file. * sysdeps/unix/sysv/linux/poll.c: Test whether poll syscall is available and use fall-back implementation if not. * sysdeps/unix/sysv/linux/syscalls.list: Sort entries. * time/ialloc.c: Update from tzcode1997c. * time/private.h: Likewise. * time/scheck.c: Likewise. * time/tzselect.ksh: Likewise. * time/zdump.c: Likewise. * time/zic.c: Likewise. * time/tzfile.c: Pretty print. 1997-03-06 07:37 Geoff Keating <geoffk@ozemail.com.au> Port to powerpc-*-linux-gnu. Slightly tested, under MkLinux, on a 601. * sysdeps/powerpc/Implies: Added. * sysdeps/powerpc/__longjmp.S: Added. * sysdeps/powerpc/__math.h: Added. * sysdeps/powerpc/bsd-_setjmp.S: Added. * sysdeps/powerpc/bsd-setjmp.S: Added. * sysdeps/powerpc/dl-machine.h: Added. * sysdeps/powerpc/ffs.c: Added. * sysdeps/powerpc/fpu_control.h: Added. * sysdeps/powerpc/jmp_buf.h: Added. * sysdeps/powerpc/setjmp.S: Added. * sysdeps/powerpc/strlen.s: Added. * sysdeps/powerpc/elf/start.c: Added. * sysdeps/powerpc/fpu_control.h: Added. * sysdeps/powerpc/jmp_buf.h: Added. * sysdeps/unix/sysv/linux/powerpc/Dist: Added. * sysdeps/unix/sysv/linux/powerpc/_exit.S: Added. * sysdeps/unix/sysv/linux/powerpc/brk.c: Added. * sysdeps/unix/sysv/linux/powerpc/clone.S: Added. * sysdeps/unix/sysv/linux/powerpc/init-first.h: Added. * sysdeps/unix/sysv/linux/powerpc/ioctl-types.h: Added. * sysdeps/unix/sysv/linux/powerpc/profil.c: Added. * sysdeps/unix/sysv/linux/powerpc/sigreturn.S: Added. * sysdeps/unix/sysv/linux/powerpc/socket.S: Added. * sysdeps/unix/sysv/linux/powerpc/syscall.S: Added. * sysdeps/unix/sysv/linux/powerpc/syscalls.list: Added. * sysdeps/unix/sysv/linux/powerpc/sysdep.c: Added. * sysdeps/unix/sysv/linux/powerpc/sysdep.h: Added. * sysdeps/unix/sysv/linux/powerpc/termbits.h: Added. * sysdeps/unix/sysv/linux/powerpc/sys/syscall.h: Added. 1997-03-05 05:24 Geoff Keating <geoffk@ozemail.com.au> * elf/dl-runtime.c (fixup): Add ELF_FIXUP_RETURNS_ADDRESS switch, because knowing the first instruction of a PowerPC PLT trampoline is not very helpful. 1997-03-04 08:04 Geoff Keating <geoffk@ozemail.com.au> * elf/dl-load.c (ELF_PREFERRED_ADDRESS, ELF_PREFERRED_ADDRESS_DATA, ELF_FIXED_ADDRESS): Added. These are for dl-machine.h to indicate a preference as to where executables should be loaded. 1997-02-28 08:50 Geoff Keating <geoffk@ozemail.com.au> * elf/elf.h: Add in all those PowerPC reloc types. 1997-02-24 07:12 Geoff Keating <geoffk@ozemail.com.au> * stdio-common/vfscanf.c: Use __va_copy if available. 1997-03-06 13:50 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de> * malloc/malloc.c (mprotect) [_LIBC]: Define as __mprotect to clean up namespace. 1997-03-07 14:27 Ulrich Drepper <drepper@cygnus.com> * sysdeps/libm-ieee754/s_fpclassify.c (__fpclassify): Don't use non-existing GET_WORDS macro, use EXTRACT_WORDS. Reported by Andres Schwab <schwab@issan.informatik.uni-dortmund.de>. 1997-03-07 05:27 Ulrich Drepper <drepper@cygnus.com> * sysdeps/unix/sysv/linux/i386/sigaction.c: The user- and kernel-level sigaction structure is different. handle this correctly. Bug report by Andres Jaeger <jaeger@informatik.uni-kl.de>. 1997-03-06 05:55 David Engel <david@sw.ods.com> * sysdeps/generic/dl-cache.c (_dl_load_cache_lookup): Also recognize cache entries with flag == 3. 1997-03-06 01:05 Ulrich Drepper <drepper@cygnus.com> * sysdeps/generic/netinet/in.h (INADDR_NONE): Cast to unsigned int. (INADDR_LOOPBACK): Likewise. * sysdeps/unix/sysv/linux/netinet/in.h: Likewise. * manual/socket.texi: Correct types of INADDR_* constants from unsigned long to unsigned. 1997-03-05 23:14 Ulrich Drepper <drepper@cygnus.com> * time/antarctica: Update from tzdata1997c. * time/asia: Likewise. * time/zone.tab: Likewise. 1997-03-05 00:43 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de> * configure.in (libc_cv_asm_symver_directive, libc_cv_ld_version_script_option): Remove unknown instruction from assembler test file. 1997-03-04 19:14 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de> * sysdeps/m68k/fpu/__math.h: Update feature tests to use __USE_ISOC9X. [__USE_ISOC9X]: Define __log2 and __exp2 inlines. (fabs): Remove defininition, it is a gcc builtin. (sqrt, __sqrt): Remove definition, they have wrappers in libm. 1997-03-04 10:11 H.J. Lu <hjl@lucon.org> * sunrpc/Makefile ($(objpfx)rpc-proto.c): Create subdir before generating file. 1997-03-05 03:59 Ulrich Drepper <drepper@cygnus.com> * inet/rcmd.c (__ivaliduser): Don't use getline, but __getline instead to avoid namespace problems. Reported by David Mosberger-Tang <davidm@AZStarNet.COM>. 1997-03-03 19:01 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de> * login/utmp_file.c: Fix previous change. Make portable by checking the _HAVE_UT_* feature macros. * libio/fileops.c (_IO_file_finish): Likewise.
1997-03-08 05:28:20 +00:00
# So they get cleaned up.
generated += $(addprefix wordexp-test-result, 1 2 3 4 5 6 7 8 9 10) \
Make tests consistently use *.out output files. This patch systematically renames miscellaneous tests so their outputs use a *.out name (unless the test is just running some glibc program with its conventional output file name, rather than a special program at all, as in catgets tests generating *.cat). In the case of the iconv test test-iconvconfig, output is redirected where it wasn't before. In various places the "generated" variable is updated to reflect the revised test names; in iconvdata/Makefile a typo (mmtrace-tst-loading) is also fixed. resolv/Makefile sets both "generate" (which appears unused) and "generated". Bitrot in the settings of these variables could no doubt be fixed so that "make clean" after build and testing leaves results the same as after configure (and indeed the tests-special / xtests-special variables could be used to simplify things, by removing those files automatically rather than listing them manually in these variables), and "make distclean" leaves an empty build directory, but right now it appears various files don't get deleted. I think they are liable to continue to bitrot in the absence of routine testing that these targets actually work, given that building in the source directory isn't supported and that was the main use of such makefile targets. Tested x86_64. * elf/Makefile (tests-special): Rename tests to end with .out. ($(objpfx)noload-mem): Likewise. ($(objpfx)tst-leaks1-mem): Likewise. ($(objpfx)tst-leaks1-static-mem.out): Likewise. * iconv/Makefile (xtests-special): Change test-iconvconfig to $(objpfx)test-iconvconfig.out. (test-iconvconfig): Change to $(objpfx)test-iconvconfig.out. Use set -e inside subshell and redirect output to file. * iconvdata/Makefile (generated): Rename tests to end with .out. Correct type. (tests-special): Rename tests to end with .out. ($(objpfx)mtrace-tst-loading): Likewise. * intl/Makefile (generated): Likewise. (tests-special): Likewise. ($(objpfx)mtrace-tst-gettext): Likewise. * misc/Makefile (generated): Likewise. (tests-special): Likewise. ($(objpfx)tst-error1-mem): Likewise. * nptl/Makefile (tests-special): Likewise. ($(objpfx)tst-stack3-mem): Likewise. (generated): Likewise. * posix/Makefile (generated): Likewise. (tests-special): Likewise. (xtests-special): Likewise. ($(objpfx)tst-fnmatch-mem): Likewise. ($(objpfx)bug-regex2-mem): Likewise. ($(objpfx)bug-regex14-mem): Likewise. ($(objpfx)bug-regex21-mem): Likewise. ($(objpfx)bug-regex31-mem): Likewise. ($(objpfx)tst-vfork3-mem): Likewise. ($(objpfx)tst-rxspencer-no-utf8-mem): Likewise. ($(objpfx)tst-pcre-mem): Likewise. ($(objpfx)tst-boost-mem): Likewise. ($(objpfx)bug-ga2-mem): Likewise. ($(objpfx)bug-glob2-mem): Likewise. * resolv/Makefile (generate): Likewise. (tests-special): Likewise. (xtests-special): Likewise. (generated): Likewise. ($(objpfx)mtrace-tst-leaks): Likewise. ($(objpfx)mtrace-tst-leaks2): Likewise. localedata: * Makefile (generated): Rename tests to end with .out. (tests-special): Likewise. ($(objpfx)mtrace-tst-leaks): Likewise.
2014-03-07 03:29:23 +00:00
annexc annexc.out wordexp-tst.out bug-regex2-mem.out \
bug-regex2.mtrace bug-regex14-mem.out bug-regex14.mtrace \
bug-regex21-mem.out bug-regex21.mtrace \
bug-regex31-mem.out bug-regex31.mtrace \
tst-rxspencer-no-utf8-mem.out tst-rxspencer-no-utf8.mtrace \
Split up rules for tests using mtrace and something else. Most glibc tests that use mtrace to verify that there were no memory leaks from the glibc facilities used in a given test depend on the .out file of the previous test so that the mtrace test runs mtrace and nothing else. Two, however, have a single target combining mtrace with something else. In the case of libio/tst-fopenloc.check, the test both compares the output with an expected baseline and runs mtrace. In the case of posix/tst-rxspencer-mem, the test is run (with different command line from the main run) and then mtrace is run, from the same makefile target. This patch splits both of these tests up to use separate makefile targets for each thing tested; in the tst-rxspencer case, a file tst-rxspencer-no-utf8.c is created that just includes tst-rxspencer.c, as is usual for tests where the same code gets tested in different compile-time or runtime configurations. Adding $(evaluate-test) to test commands, as in <https://sourceware.org/ml/libc-alpha/2014-01/msg00194.html>, will no longer need to insert && between multiple commands, as all tests will either have just a single command or already use &&. Tested x86_64. * libio/Makefile ($(objpfx)tst-fopenloc.check): Split into separate $(objpfx)tst-fopenloc-cmp.out and $(objpfx)tst-fopenloc-mem.out targets. (tests): Update dependencies. * posix/Makefile (tests variable): Add tst-rxspencer-no-utf8. (generated): Change tst-rxspencer-mem and tst-rxspencer.mtrace to tst-rxspencer-no-utf8-mem and tst-rxspencer-no-utf8.mtrace. (tst-rxspencer-no-utf8-ARGS): New variable. (tst-rxspencer-no-utf8-ENV): Likewise. (tests target): Depend on $(objpfx)tst-rxspencer-no-utf8-mem instead of $(objpfx)tst-rxspencer-mem. ($(objpfx)tst-rxspencer-mem): Change target to $(objpfx)tst-rxspencer-no-utf8-mem. Depend on $(objpfx)tst-rxspencer-no-utf8.out instead of running test program. * posix/tst-rxspencer-no-utf8.c: New file.
2014-02-14 13:45:14 +00:00
tst-getconf.out \
Make tests consistently use *.out output files. This patch systematically renames miscellaneous tests so their outputs use a *.out name (unless the test is just running some glibc program with its conventional output file name, rather than a special program at all, as in catgets tests generating *.cat). In the case of the iconv test test-iconvconfig, output is redirected where it wasn't before. In various places the "generated" variable is updated to reflect the revised test names; in iconvdata/Makefile a typo (mmtrace-tst-loading) is also fixed. resolv/Makefile sets both "generate" (which appears unused) and "generated". Bitrot in the settings of these variables could no doubt be fixed so that "make clean" after build and testing leaves results the same as after configure (and indeed the tests-special / xtests-special variables could be used to simplify things, by removing those files automatically rather than listing them manually in these variables), and "make distclean" leaves an empty build directory, but right now it appears various files don't get deleted. I think they are liable to continue to bitrot in the absence of routine testing that these targets actually work, given that building in the source directory isn't supported and that was the main use of such makefile targets. Tested x86_64. * elf/Makefile (tests-special): Rename tests to end with .out. ($(objpfx)noload-mem): Likewise. ($(objpfx)tst-leaks1-mem): Likewise. ($(objpfx)tst-leaks1-static-mem.out): Likewise. * iconv/Makefile (xtests-special): Change test-iconvconfig to $(objpfx)test-iconvconfig.out. (test-iconvconfig): Change to $(objpfx)test-iconvconfig.out. Use set -e inside subshell and redirect output to file. * iconvdata/Makefile (generated): Rename tests to end with .out. Correct type. (tests-special): Rename tests to end with .out. ($(objpfx)mtrace-tst-loading): Likewise. * intl/Makefile (generated): Likewise. (tests-special): Likewise. ($(objpfx)mtrace-tst-gettext): Likewise. * misc/Makefile (generated): Likewise. (tests-special): Likewise. ($(objpfx)tst-error1-mem): Likewise. * nptl/Makefile (tests-special): Likewise. ($(objpfx)tst-stack3-mem): Likewise. (generated): Likewise. * posix/Makefile (generated): Likewise. (tests-special): Likewise. (xtests-special): Likewise. ($(objpfx)tst-fnmatch-mem): Likewise. ($(objpfx)bug-regex2-mem): Likewise. ($(objpfx)bug-regex14-mem): Likewise. ($(objpfx)bug-regex21-mem): Likewise. ($(objpfx)bug-regex31-mem): Likewise. ($(objpfx)tst-vfork3-mem): Likewise. ($(objpfx)tst-rxspencer-no-utf8-mem): Likewise. ($(objpfx)tst-pcre-mem): Likewise. ($(objpfx)tst-boost-mem): Likewise. ($(objpfx)bug-ga2-mem): Likewise. ($(objpfx)bug-glob2-mem): Likewise. * resolv/Makefile (generate): Likewise. (tests-special): Likewise. (xtests-special): Likewise. (generated): Likewise. ($(objpfx)mtrace-tst-leaks): Likewise. ($(objpfx)mtrace-tst-leaks2): Likewise. localedata: * Makefile (generated): Rename tests to end with .out. (tests-special): Likewise. ($(objpfx)mtrace-tst-leaks): Likewise.
2014-03-07 03:29:23 +00:00
tst-pcre-mem.out tst-pcre.mtrace tst-boost-mem.out \
tst-boost.mtrace bug-ga2.mtrace bug-ga2-mem.out \
bug-glob2.mtrace bug-glob2-mem.out tst-vfork3-mem.out \
tst-vfork3.mtrace getconf.speclist tst-fnmatch-mem.out \
tst-fnmatch.mtrace bug-regex36.mtrace
Enumerate tests with special rules in tests-special variable. This patch is a revised and updated version of <https://sourceware.org/ml/libc-alpha/2014-01/msg00196.html>. In order to generate overall summaries of the results of all tests in the glibc testsuite, we need to identify and concatenate the files with the results of individual tests. Tomas Dohnalek's patch used $(common-objpfx)*/*.test-result for this. However, the normal glibc approach is explicit enumeration of the expected set of files with a given property, rather than all files matching some pattern like that. Furthermore, we would like to be able to mark tests as UNRESOLVED if the file with their results is for some reason missing, and in future we would like to be able to mark tests as UNSUPPORTED if they are disabled for a particular configuration (rather than simply having them missing from the list of tests as at present). Such handling of tests that were not run or did not record results requires an explicit enumeration of tests. For the tests following the default makefile rules, $(tests) (and $(xtests)) provides such an enumeration. Others, however, are added directly as dependencies of the "tests" and "xtests" makefile targets. This patch changes the makefiles to put them in variables tests-special and xtests-special, with appropriate dependencies on the tests listed there then being added centrally. Those variables are used in Rules and so need to be set before Rules is included in a subdirectory makefile, which is often earlier in the makefile than the dependencies were present before. We previously discussed the question of where to include Rules; see the question at <https://sourceware.org/ml/libc-alpha/2012-11/msg00798.html>, and a discussion in <https://sourceware.org/ml/libc-alpha/2013-01/msg00337.html> of why Rules is included early rather than late in subdirectory makefiles. It was necessary to avoid an indirection through the check-abi target and get the check-abi-* targets for individual libraries into the tests-special variable. The intl/ test $(objpfx)tst-gettext.out, previously built only because of dependencies from other tests, was also added to tests-special for the same reason. The entries in tests-special are the full makefile targets, complete with $(objpfx) and .out. If a future change causes tests to be named consistently with a .out suffix, this can be changed to include just the path relative to $(objpfx), without .out. Tested x86_64, including that the same set of files is generated in the build directory by a build and testsuite run both before and after the patch (except for changes to the elf/tst-null-argv.debug.out.<number> file name), and a build with run-built-tests=no to verify there aren't any more obvious instances of the issue Marcus Shawcroft reported with a previous version in <https://sourceware.org/ml/libc-alpha/2014-01/msg00462.html>. * Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. (tests): Depend on $(tests-special). * Makerules (check-abi-list): New variable. (check-abi): Depend on $(check-abi-list). [$(subdir) = elf] (tests-special): Add $(objpfx)check-abi-libc.out. [$(build-shared) = yes && subdir] (tests-special): Add $(check-abi-list). [$(build-shared) = yes && subdir] (tests): Do not depend on check-abi. * Rules (tests): Depend on $(tests-special). (xtests): Depend on $(xtests-special). * catgets/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * conform/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * elf/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * grp/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * iconv/Makefile (xtests): Change dependencies to .... (xtests-special): ... additions to this variable. * iconvdata/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * intl/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. Also add $(objpfx)tst-gettext.out. * io/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * libio/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * malloc/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * misc/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * nptl/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * nptl_db/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * posix/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. (xtests): Change dependencies to .... (xtests-special): ... additions to this variable. * resolv/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. (xtests): Change dependencies to .... (xtests-special): ... additions to this variable. * stdio-common/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. (do-tst-unbputc): Remove target. (do-tst-printf): Likewise. * stdlib/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * string/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * sysdeps/x86/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. localedata: * Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable.
2014-03-06 22:35:33 +00:00
ifeq ($(run-built-tests),yes)
ifeq (yes,$(build-shared))
tests-special += $(objpfx)globtest.out $(objpfx)wordexp-tst.out
endif
endif
# Run a test on the header files we use.
# XXX Please note that for now we ignore the result of this test.
tests-special += $(objpfx)annexc.out
ifeq ($(run-built-tests),yes)
Make tests consistently use *.out output files. This patch systematically renames miscellaneous tests so their outputs use a *.out name (unless the test is just running some glibc program with its conventional output file name, rather than a special program at all, as in catgets tests generating *.cat). In the case of the iconv test test-iconvconfig, output is redirected where it wasn't before. In various places the "generated" variable is updated to reflect the revised test names; in iconvdata/Makefile a typo (mmtrace-tst-loading) is also fixed. resolv/Makefile sets both "generate" (which appears unused) and "generated". Bitrot in the settings of these variables could no doubt be fixed so that "make clean" after build and testing leaves results the same as after configure (and indeed the tests-special / xtests-special variables could be used to simplify things, by removing those files automatically rather than listing them manually in these variables), and "make distclean" leaves an empty build directory, but right now it appears various files don't get deleted. I think they are liable to continue to bitrot in the absence of routine testing that these targets actually work, given that building in the source directory isn't supported and that was the main use of such makefile targets. Tested x86_64. * elf/Makefile (tests-special): Rename tests to end with .out. ($(objpfx)noload-mem): Likewise. ($(objpfx)tst-leaks1-mem): Likewise. ($(objpfx)tst-leaks1-static-mem.out): Likewise. * iconv/Makefile (xtests-special): Change test-iconvconfig to $(objpfx)test-iconvconfig.out. (test-iconvconfig): Change to $(objpfx)test-iconvconfig.out. Use set -e inside subshell and redirect output to file. * iconvdata/Makefile (generated): Rename tests to end with .out. Correct type. (tests-special): Rename tests to end with .out. ($(objpfx)mtrace-tst-loading): Likewise. * intl/Makefile (generated): Likewise. (tests-special): Likewise. ($(objpfx)mtrace-tst-gettext): Likewise. * misc/Makefile (generated): Likewise. (tests-special): Likewise. ($(objpfx)tst-error1-mem): Likewise. * nptl/Makefile (tests-special): Likewise. ($(objpfx)tst-stack3-mem): Likewise. (generated): Likewise. * posix/Makefile (generated): Likewise. (tests-special): Likewise. (xtests-special): Likewise. ($(objpfx)tst-fnmatch-mem): Likewise. ($(objpfx)bug-regex2-mem): Likewise. ($(objpfx)bug-regex14-mem): Likewise. ($(objpfx)bug-regex21-mem): Likewise. ($(objpfx)bug-regex31-mem): Likewise. ($(objpfx)tst-vfork3-mem): Likewise. ($(objpfx)tst-rxspencer-no-utf8-mem): Likewise. ($(objpfx)tst-pcre-mem): Likewise. ($(objpfx)tst-boost-mem): Likewise. ($(objpfx)bug-ga2-mem): Likewise. ($(objpfx)bug-glob2-mem): Likewise. * resolv/Makefile (generate): Likewise. (tests-special): Likewise. (xtests-special): Likewise. (generated): Likewise. ($(objpfx)mtrace-tst-leaks): Likewise. ($(objpfx)mtrace-tst-leaks2): Likewise. localedata: * Makefile (generated): Rename tests to end with .out. (tests-special): Likewise. ($(objpfx)mtrace-tst-leaks): Likewise.
2014-03-07 03:29:23 +00:00
tests-special += $(objpfx)bug-regex2-mem.out $(objpfx)bug-regex14-mem.out \
$(objpfx)bug-regex21-mem.out $(objpfx)bug-regex31-mem.out \
$(objpfx)tst-rxspencer-no-utf8-mem.out $(objpfx)tst-pcre-mem.out \
$(objpfx)tst-boost-mem.out $(objpfx)tst-getconf.out \
$(objpfx)bug-glob2-mem.out $(objpfx)tst-vfork3-mem.out \
$(objpfx)tst-fnmatch-mem.out $(objpfx)bug-regex36-mem.out
Make tests consistently use *.out output files. This patch systematically renames miscellaneous tests so their outputs use a *.out name (unless the test is just running some glibc program with its conventional output file name, rather than a special program at all, as in catgets tests generating *.cat). In the case of the iconv test test-iconvconfig, output is redirected where it wasn't before. In various places the "generated" variable is updated to reflect the revised test names; in iconvdata/Makefile a typo (mmtrace-tst-loading) is also fixed. resolv/Makefile sets both "generate" (which appears unused) and "generated". Bitrot in the settings of these variables could no doubt be fixed so that "make clean" after build and testing leaves results the same as after configure (and indeed the tests-special / xtests-special variables could be used to simplify things, by removing those files automatically rather than listing them manually in these variables), and "make distclean" leaves an empty build directory, but right now it appears various files don't get deleted. I think they are liable to continue to bitrot in the absence of routine testing that these targets actually work, given that building in the source directory isn't supported and that was the main use of such makefile targets. Tested x86_64. * elf/Makefile (tests-special): Rename tests to end with .out. ($(objpfx)noload-mem): Likewise. ($(objpfx)tst-leaks1-mem): Likewise. ($(objpfx)tst-leaks1-static-mem.out): Likewise. * iconv/Makefile (xtests-special): Change test-iconvconfig to $(objpfx)test-iconvconfig.out. (test-iconvconfig): Change to $(objpfx)test-iconvconfig.out. Use set -e inside subshell and redirect output to file. * iconvdata/Makefile (generated): Rename tests to end with .out. Correct type. (tests-special): Rename tests to end with .out. ($(objpfx)mtrace-tst-loading): Likewise. * intl/Makefile (generated): Likewise. (tests-special): Likewise. ($(objpfx)mtrace-tst-gettext): Likewise. * misc/Makefile (generated): Likewise. (tests-special): Likewise. ($(objpfx)tst-error1-mem): Likewise. * nptl/Makefile (tests-special): Likewise. ($(objpfx)tst-stack3-mem): Likewise. (generated): Likewise. * posix/Makefile (generated): Likewise. (tests-special): Likewise. (xtests-special): Likewise. ($(objpfx)tst-fnmatch-mem): Likewise. ($(objpfx)bug-regex2-mem): Likewise. ($(objpfx)bug-regex14-mem): Likewise. ($(objpfx)bug-regex21-mem): Likewise. ($(objpfx)bug-regex31-mem): Likewise. ($(objpfx)tst-vfork3-mem): Likewise. ($(objpfx)tst-rxspencer-no-utf8-mem): Likewise. ($(objpfx)tst-pcre-mem): Likewise. ($(objpfx)tst-boost-mem): Likewise. ($(objpfx)bug-ga2-mem): Likewise. ($(objpfx)bug-glob2-mem): Likewise. * resolv/Makefile (generate): Likewise. (tests-special): Likewise. (xtests-special): Likewise. (generated): Likewise. ($(objpfx)mtrace-tst-leaks): Likewise. ($(objpfx)mtrace-tst-leaks2): Likewise. localedata: * Makefile (generated): Rename tests to end with .out. (tests-special): Likewise. ($(objpfx)mtrace-tst-leaks): Likewise.
2014-03-07 03:29:23 +00:00
xtests-special += $(objpfx)bug-ga2-mem.out
Enumerate tests with special rules in tests-special variable. This patch is a revised and updated version of <https://sourceware.org/ml/libc-alpha/2014-01/msg00196.html>. In order to generate overall summaries of the results of all tests in the glibc testsuite, we need to identify and concatenate the files with the results of individual tests. Tomas Dohnalek's patch used $(common-objpfx)*/*.test-result for this. However, the normal glibc approach is explicit enumeration of the expected set of files with a given property, rather than all files matching some pattern like that. Furthermore, we would like to be able to mark tests as UNRESOLVED if the file with their results is for some reason missing, and in future we would like to be able to mark tests as UNSUPPORTED if they are disabled for a particular configuration (rather than simply having them missing from the list of tests as at present). Such handling of tests that were not run or did not record results requires an explicit enumeration of tests. For the tests following the default makefile rules, $(tests) (and $(xtests)) provides such an enumeration. Others, however, are added directly as dependencies of the "tests" and "xtests" makefile targets. This patch changes the makefiles to put them in variables tests-special and xtests-special, with appropriate dependencies on the tests listed there then being added centrally. Those variables are used in Rules and so need to be set before Rules is included in a subdirectory makefile, which is often earlier in the makefile than the dependencies were present before. We previously discussed the question of where to include Rules; see the question at <https://sourceware.org/ml/libc-alpha/2012-11/msg00798.html>, and a discussion in <https://sourceware.org/ml/libc-alpha/2013-01/msg00337.html> of why Rules is included early rather than late in subdirectory makefiles. It was necessary to avoid an indirection through the check-abi target and get the check-abi-* targets for individual libraries into the tests-special variable. The intl/ test $(objpfx)tst-gettext.out, previously built only because of dependencies from other tests, was also added to tests-special for the same reason. The entries in tests-special are the full makefile targets, complete with $(objpfx) and .out. If a future change causes tests to be named consistently with a .out suffix, this can be changed to include just the path relative to $(objpfx), without .out. Tested x86_64, including that the same set of files is generated in the build directory by a build and testsuite run both before and after the patch (except for changes to the elf/tst-null-argv.debug.out.<number> file name), and a build with run-built-tests=no to verify there aren't any more obvious instances of the issue Marcus Shawcroft reported with a previous version in <https://sourceware.org/ml/libc-alpha/2014-01/msg00462.html>. * Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. (tests): Depend on $(tests-special). * Makerules (check-abi-list): New variable. (check-abi): Depend on $(check-abi-list). [$(subdir) = elf] (tests-special): Add $(objpfx)check-abi-libc.out. [$(build-shared) = yes && subdir] (tests-special): Add $(check-abi-list). [$(build-shared) = yes && subdir] (tests): Do not depend on check-abi. * Rules (tests): Depend on $(tests-special). (xtests): Depend on $(xtests-special). * catgets/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * conform/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * elf/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * grp/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * iconv/Makefile (xtests): Change dependencies to .... (xtests-special): ... additions to this variable. * iconvdata/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * intl/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. Also add $(objpfx)tst-gettext.out. * io/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * libio/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * malloc/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * misc/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * nptl/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * nptl_db/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * posix/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. (xtests): Change dependencies to .... (xtests-special): ... additions to this variable. * resolv/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. (xtests): Change dependencies to .... (xtests-special): ... additions to this variable. * stdio-common/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. (do-tst-unbputc): Remove target. (do-tst-printf): Likewise. * stdlib/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * string/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * sysdeps/x86/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. localedata: * Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable.
2014-03-06 22:35:33 +00:00
endif
1995-02-18 01:27:10 +00:00
include ../Rules
2012-10-24 00:08:46 +00:00
ifeq ($(run-built-tests),yes)
1999-03-19 Andreas Jaeger <aj@arthur.rhein-neckar.de> * rt/Makefile: Link against static library if no shared lib is available. * localedata/Makefile: The shells scripts implementing the test require the dynamic linker which is not available with --disable-shared. Skip the test if --disable-shared is given. * linuxthreads/Makefile: Link test against static libpthread if no shared lib is available. * iconvdata/Makefile (tests): Run iconv-test only if we're building shared libraries. * elf/Makefile (tests): Likewise for elf tests. * posix/Makefile: The test frameworks globtest and wordexp-test require the dynamic linker which is not available with --disable-shared. Skip the test if --disable-shared is given. * grp/Makefile (otherlibs): For static nss build link against necessary libs. * rt/Makefile: Link against static library if no shared lib is available. * localedata/Makefile: The shells scripts implementing the test require the dynamic linker which is not available with --disable-shared. Skip the test if --disable-shared is given. * linuxthreads/Makefile: Link test against static libpthread if no shared lib is available. * iconvdata/Makefile (tests): Run iconv-test only if we're building shared libraries. * elf/Makefile (tests): Likewise for elf tests. * posix/Makefile: The test frameworks globtest and wordexp-test require the dynamic linker which is not available with --disable-shared. Skip the test if --disable-shared is given. * grp/Makefile (otherlibs): For static nss build link against necessary libs. 1999-03-19 Andreas Jaeger <aj@arthur.rhein-neckar.de>
1999-03-20 17:16:44 +00:00
# globtest and wordexp-test currently only works with shared libraries
ifeq (yes,$(build-shared))
$(objpfx)globtest.out: globtest.sh $(objpfx)globtest
$(SHELL) $< $(common-objpfx) '$(test-via-rtld-prefix)' \
Generate .test-result files for tests with special rules. This patch, an updated version of <https://sourceware.org/ml/libc-alpha/2014-01/msg00194.html> now proposed for inclusion in glibc, extends the generation of PASS and FAIL status in .test-result files for individual tests to cover tests with their own custom makefile rules. This is just adding $(evaluate-test) calls to all such rules, since tests with multiple commands were previously split into separate tests. Note that the tests the makefiles expect to fail (posix/annexc and conformtest) currently get FAIL listed in the .test-result file, rather than XFAIL; a subsequent patch will introduce a better XFAIL mechanism. Tested x86_64. * Makefile ($(objpfx)c++-types-check.out): Use $(evaluate-test). ($(objpfx)check-local-headers.out): Likewise. ($(objpfx)begin-end-check.out): Likewise. * Makerules (check-abi-%.out): Likewise. * catgets/Makefile ($(objpfx)test1.cat): Likewise. ($(objpfx)test2.cat): Likewise. ($(objpfx)de/libc.cat): Likewise. ($(objpfx)test-gencat.out): Likewise. * conform/Makefile ($(objpfx)run-conformtest.out): Likewise. * elf/Makefile ($(objpfx)order-cmp.out): Likewise. ($(objpfx)noload-mem): Likewise. ($(objpfx)tst-pathopt.out): Likewise. ($(objpfx)tst-rtld-load-self.out): Likewise. ($(objpfx)tst-array1-cmp.out): Likewise. ($(objpfx)tst-array1-static-cmp.out): Likewise. ($(objpfx)tst-array2-cmp.out): Likewise. ($(objpfx)tst-array3-cmp.out): Likewise. ($(objpfx)tst-array4-cmp.out): Likewise. ($(objpfx)tst-array5-cmp.out): Likewise. ($(objpfx)tst-array5-static-cmp.out): Likewise. ($(objpfx)check-textrel.out): Likewise. ($(objpfx)check-execstack.out): Likewise. ($(objpfx)check-localplt.out): Likewise. ($(objpfx)order2-cmp.out): Likewise. ($(objpfx)tst-leaks1-mem): Likewise. ($(objpfx)tst-leaks1-static-mem): Likewise. ($(objpfx)tst-initorder-cmp.out): Likewise. ($(objpfx)tst-initorder2-cmp.out): Likewise. ($(objpfx)tst-unused-dep.out): Likewise. ($(objpfx)tst-unused-dep-cmp.out): Likewise. * grp/Makefile ($(objpfx)tst_fgetgrent.out): Likewise. * iconv/Makefile (test-iconvconfig): Likewise. * iconvdata/Makefile ($(objpfx)mtrace-tst-loading): Likewise. ($(objpfx)iconv-test.out): Likewise. ($(objpfx)tst-tables.out): Likewise. * intl/Makefile ($(objpfx)mtrace-tst-gettext): Likewise. ($(objpfx)tst-gettext.out): Likewise. ($(objpfx)tst-translit.out): Likewise. ($(objpfx)tst-gettext2.out): Likewise. ($(objpfx)tst-gettext4.out): Likewise. ($(objpfx)tst-gettext6.out): Likewise. * io/Makefile ($(objpfx)ftwtest.out): Likewise. * libio/Makefile ($(objpfx)test-freopen.out): Likewise. ($(objpfx)tst-fopenloc-cmp.out): Likewise. ($(objpfx)tst-fopenloc-mem.out): Likewise. * malloc/Makefile ($(objpfx)tst-mtrace.out): Likewise. * misc/Makefile ($(objpfx)tst-error1-mem): Likewise. * posix/Makefile ($(objpfx)globtest.out): Likewise. ($(objpfx)wordexp-tst.out): Likewise. ($(objpfx)annexc.out): Likewise. ($(objpfx)tst-fnmatch-mem): Likewise. ($(objpfx)bug-regex2-mem): Likewise. ($(objpfx)bug-regex14-mem): Likewise. ($(objpfx)bug-regex21-mem): Likewise. ($(objpfx)bug-regex31-mem): Likewise. ($(objpfx)tst-vfork3-mem): Likewise. ($(objpfx)tst-rxspencer-no-utf8-mem): Likewise. ($(objpfx)tst-pcre-mem): Likewise. ($(objpfx)tst-boost-mem): Likewise. ($(objpfx)tst-getconf.out): Likewise. ($(objpfx)bug-ga2-mem): Likewise. ($(objpfx)bug-glob2-mem): Likewise. * resolv/Makefile ($(objpfx)mtrace-tst-leaks): Likewise. ($(objpfx)mtrace-tst-leaks2): Likewise. * stdio-common/Makefile ($(objpfx)tst-unbputc.out): Likewise. ($(objpfx)tst-printf.out): Likewise. ($(objpfx)tst-setvbuf1.out): Likewise. ($(objpfx)tst-setvbuf1-cmp.out): Likewise. * stdlib/Makefile ($(objpfx)isomac.out): Likewise. ($(objpfx)tst-fmtmsg.out): Likewise. * string/Makefile ($(objpfx)tst-svc-cmp.out): Likewise. * sysdeps/x86/Makefile ($(objpfx)tst-xmmymm.out): Likewise. localedata: * Makefile ($(objpfx)sort-test.out): Use $(evaluate-test). ($(objpfx)tst-fmon.out): Likewise. ($(objpfx)tst-numeric.out): Likewise. ($(objpfx)tst-locale.out): Likewise. ($(objpfx)tst-rpmatch.out): Likewise. ($(objpfx)tst-trans.out): Likewise. ($(objpfx)tst-mbswcs.out): Likewise. ($(objpfx)tst-ctype.out): Likewise. ($(objpfx)tst-wctype.out): Likewise. ($(objpfx)tst-langinfo.out): Likewise. ($(objpfx)mtrace-tst-leaks): Likewise. nptl: * Makefile ($(objpfx)tst-stack3-mem): Use $(evaluate-test). ($(objpfx)tst-tls6.out): Likewise. ($(objpfx)tst-cleanup0.out): Likewise. ($(objpfx)tst-cleanup0-cmp.out): Likewise. ($(objpfx)tst-cancel-wrappers.out): Likewise. ($(objpfx)tst-oddstacklimit.out): Likewise. nptl_db: * Makefile ($(objpfx)db-symbols.out): Use $(evaluate-test).
2014-02-21 21:48:08 +00:00
'$(test-program-prefix)' '$(test-wrapper-env)'; \
$(evaluate-test)
$(objpfx)wordexp-tst.out: wordexp-tst.sh $(objpfx)wordexp-test
Don't require test wrappers to preserve environment variables, use more consistent environment. One wart in the original support for test wrappers for cross testing, as noted in <https://sourceware.org/ml/libc-alpha/2012-10/msg00722.html>, is the requirement for test wrappers to pass a poorly-defined set of environment variables from the build system to the system running the glibc under test. Although some variables are passed explicitly via $(test-wrapper-env), including LD_* variables that simply can't be passed implicitly because of the side effects they'd have on the build system's dynamic linker, others are passed implicitly, including variables such as GCONV_PATH and LOCPATH that could potentially affect the build system's libc (so effectively relying on any such effects not breaking the wrappers). In addition, the code in cross-test-ssh.sh for preserving environment variables is fragile (it depends on how bash formats a list of exported variables, and could well break for multi-line variable definitions where the contents contain things looking like other variable definitions). This patch moves to explicitly passing environment variables via $(test-wrapper-env). Makefile variables that previously used $(test-wrapper) are split up into -before-env and -after-env parts that can be passed separately to the various .sh files used in testing, so those files can then insert environment settings between the two parts. The common default environment settings in make-test-out are made into a separate makefile variable that can also be passed to scripts, rather than many scripts duplicating those settings (for testing an installed glibc, it is desirable to have the GCONV_PATH setting on just one place, so just that one place needs to support it pointing to an installed sysroot instead of the build tree). The default settings are included in the variables such as $(test-program-prefix), so that if tests do not need any non-default settings they can continue to use single variables rather than the split-up variables. Although this patch cleans up LC_ALL=C settings (that being part of the common defaults), various LANG=C and LANGUAGE=C settings remain. Those are generally unnecessary and I propose a subsequent cleanup to remove them. LC_ALL takes precedence over LANG, and while LANGUAGE takes precedence over LC_ALL, it only does so for settings other than LC_ALL=C. So LC_ALL=C on its own is sufficient to ensure the C locale, and anything that gets LC_ALL=C does not need the other settings. While preparing this patch I noticed some tests with .sh files that appeared to do nothing beyond what the generic makefile support for tests can do (localedata/tst-wctype.sh - the makefiles support -ENV variables and .input files - and localedata/tst-mbswcs.sh - just runs five tests that could be run individually from the makefile). So I propose another subsequent cleanup to move those to using the generic support instead of special .sh files. Tested x86_64 (native) and powerpc32 (cross). * Makeconfig (run-program-env): New variable. (run-program-prefix-before-env): Likewise. (run-program-prefix-after-env): Likewise. (run-program-prefix): Define in terms of new variables. (built-program-cmd-before-env): New variable. (built-program-cmd-after-env): Likewise. (built-program-cmd): Define in terms of new variables. (test-program-prefix-before-env): New variable. (test-program-prefix-after-env): Likewise. (test-program-prefix): Define in terms of new variables. (test-program-cmd-before-env): New variable. (test-program-cmd-after-env): Likewise. (test-program-cmd): Define in terms of new variables. * Rules (make-test-out): Use $(run-program-env). * scripts/cross-test-ssh.sh (env_blacklist): Remove variable. (help): Do not mention environment variables. Mention --timeoutfactor option. (timeoutfactor): New variable. (blacklist_exports): Remove function. (exports): Remove variable. (command): Do not include ${exports}. * manual/install.texi (Configuring and compiling): Do not mention test wrappers preserving environment variables. Mention that last assignment to a variable must take precedence. * INSTALL: Regenerated. * benchtests/Makefile (run-bench): Use $(run-program-env). * catgets/Makefile ($(objpfx)test1.cat): Use $(built-program-cmd-before-env), $(run-program-env) and $(built-program-cmd-after-env). ($(objpfx)test2.cat): Do not specify environment variables explicitly. ($(objpfx)de/libc.cat): Use $(built-program-cmd-before-env), $(run-program-env) and $(built-program-cmd-after-env). ($(objpfx)test-gencat.out): Use $(test-program-cmd-before-env), $(run-program-env) and $(test-program-cmd-after-env). ($(objpfx)sample.SJIS.cat): Do not specify environment variables explicitly. * catgets/test-gencat.sh: Use test_program_cmd_before_env, run_program_env and test_program_cmd_after_env arguments. * elf/Makefile ($(objpfx)tst-pathopt.out): Use $(run-program-env). * elf/tst-pathopt.sh: Use run_program_env argument. * iconvdata/Makefile ($(objpfx)iconv-test.out): Use $(test-wrapper-env) and $(run-program-env). * iconvdata/run-iconv-test.sh: Use test_wrapper_env and run_program_env arguments. * iconvdata/tst-table.sh: Do not set GCONV_PATH explicitly. * intl/Makefile ($(objpfx)tst-gettext.out): Use $(test-program-prefix-before-env), $(run-program-env) and $(test-program-prefix-after-env). ($(objpfx)tst-gettext2.out): Likewise. * intl/tst-gettext.sh: Use test_program_prefix_before_env, run_program_env and test_program_prefix_after_env arguments. * intl/tst-gettext2.sh: Likewise. * intl/tst-gettext4.sh: Do not set environment variables explicitly. * intl/tst-gettext6.sh: Likewise. * intl/tst-translit.sh: Likewise. * malloc/Makefile ($(objpfx)tst-mtrace.out): Use $(test-program-prefix-before-env), $(run-program-env) and $(test-program-prefix-after-env). * malloc/tst-mtrace.sh: Use test_program_prefix_before_env, run_program_env and test_program_prefix_after_env arguments. * math/Makefile (run-regen-ulps): Use $(run-program-env). * nptl/Makefile ($(objpfx)tst-tls6.out): Use $(run-program-env). * nptl/tst-tls6.sh: Use run_program_env argument. Set LANG=C explicitly with each use of ${test_wrapper_env}. * posix/Makefile ($(objpfx)wordexp-tst.out): Use $(test-program-prefix-before-env), $(run-program-env) and $(test-program-prefix-after-env). * posix/tst-getconf.sh: Do not set environment variables explicitly. * posix/wordexp-tst.sh: Use test_program_prefix_before_env, run_program_env and test_program_prefix_after_env arguments. * stdio-common/tst-printf.sh: Do not set environment variables explicitly. * stdlib/Makefile ($(objpfx)tst-fmtmsg.out): Use $(test-program-prefix-before-env), $(run-program-env) and $(test-program-prefix-after-env). * stdlib/tst-fmtmsg.sh: Use test_program_prefix_before_env, run_program_env and test_program_prefix_after_env arguments. Split $test calls into $test_pre and $test. * timezone/Makefile (build-testdata): Use $(built-program-cmd-before-env), $(run-program-env) and $(built-program-cmd-after-env). localedata/ChangeLog: * Makefile ($(addprefix $(objpfx),$(CTYPE_FILES))): Use $(built-program-cmd-before-env), $(run-program-env) and $(built-program-cmd-after-env). ($(objpfx)sort-test.out): Use $(test-program-prefix-before-env), $(run-program-env) and $(test-program-prefix-after-env). ($(objpfx)tst-fmon.out): Use $(run-program-prefix-before-env), $(run-program-env) and $(run-program-prefix-after-env). ($(objpfx)tst-locale.out): Use $(built-program-cmd-before-env), $(run-program-env) and $(built-program-cmd-after-env). ($(objpfx)tst-trans.out): Use $(run-program-prefix-before-env), $(run-program-env), $(run-program-prefix-after-env), $(test-program-prefix-before-env) and $(test-program-prefix-after-env). ($(objpfx)tst-ctype.out): Use $(test-program-cmd-before-env), $(run-program-env) and $(test-program-cmd-after-env). ($(objpfx)tst-wctype.out): Likewise. ($(objpfx)tst-langinfo.out): Likewise. ($(objpfx)tst-langinfo-static.out): Likewise. * gen-locale.sh: Use localedef_before_env, run_program_env and localedef_after_env arguments. * sort-test.sh: Use test_program_prefix_before_env, run_program_env and test_program_prefix_after_env arguments. * tst-ctype.sh: Use tst_ctype_before_env, run_program_env and tst_ctype_after_env arguments. * tst-fmon.sh: Use run_program_prefix_before_env, run_program_env and run_program_prefix_after_env arguments. * tst-langinfo.sh: Use tst_langinfo_before_env, run_program_env and tst_langinfo_after_env arguments. * tst-locale.sh: Use localedef_before_env, run_program_env and localedef_after_env arguments. * tst-mbswcs.sh: Do not set environment variables explicitly. * tst-numeric.sh: Likewise. * tst-rpmatch.sh: Likewise. * tst-trans.sh: Use run_program_prefix_before_env, run_program_env, run_program_prefix_after_env, test_program_prefix_before_env and test_program_prefix_after_env arguments. * tst-wctype.sh: Use tst_wctype_before_env, run_program_env and tst_wctype_after_env arguments.
2014-06-06 22:19:27 +00:00
$(SHELL) $< $(common-objpfx) '$(test-program-prefix-before-env)' \
'$(run-program-env)' '$(test-program-prefix-after-env)'; \
Generate .test-result files for tests with special rules. This patch, an updated version of <https://sourceware.org/ml/libc-alpha/2014-01/msg00194.html> now proposed for inclusion in glibc, extends the generation of PASS and FAIL status in .test-result files for individual tests to cover tests with their own custom makefile rules. This is just adding $(evaluate-test) calls to all such rules, since tests with multiple commands were previously split into separate tests. Note that the tests the makefiles expect to fail (posix/annexc and conformtest) currently get FAIL listed in the .test-result file, rather than XFAIL; a subsequent patch will introduce a better XFAIL mechanism. Tested x86_64. * Makefile ($(objpfx)c++-types-check.out): Use $(evaluate-test). ($(objpfx)check-local-headers.out): Likewise. ($(objpfx)begin-end-check.out): Likewise. * Makerules (check-abi-%.out): Likewise. * catgets/Makefile ($(objpfx)test1.cat): Likewise. ($(objpfx)test2.cat): Likewise. ($(objpfx)de/libc.cat): Likewise. ($(objpfx)test-gencat.out): Likewise. * conform/Makefile ($(objpfx)run-conformtest.out): Likewise. * elf/Makefile ($(objpfx)order-cmp.out): Likewise. ($(objpfx)noload-mem): Likewise. ($(objpfx)tst-pathopt.out): Likewise. ($(objpfx)tst-rtld-load-self.out): Likewise. ($(objpfx)tst-array1-cmp.out): Likewise. ($(objpfx)tst-array1-static-cmp.out): Likewise. ($(objpfx)tst-array2-cmp.out): Likewise. ($(objpfx)tst-array3-cmp.out): Likewise. ($(objpfx)tst-array4-cmp.out): Likewise. ($(objpfx)tst-array5-cmp.out): Likewise. ($(objpfx)tst-array5-static-cmp.out): Likewise. ($(objpfx)check-textrel.out): Likewise. ($(objpfx)check-execstack.out): Likewise. ($(objpfx)check-localplt.out): Likewise. ($(objpfx)order2-cmp.out): Likewise. ($(objpfx)tst-leaks1-mem): Likewise. ($(objpfx)tst-leaks1-static-mem): Likewise. ($(objpfx)tst-initorder-cmp.out): Likewise. ($(objpfx)tst-initorder2-cmp.out): Likewise. ($(objpfx)tst-unused-dep.out): Likewise. ($(objpfx)tst-unused-dep-cmp.out): Likewise. * grp/Makefile ($(objpfx)tst_fgetgrent.out): Likewise. * iconv/Makefile (test-iconvconfig): Likewise. * iconvdata/Makefile ($(objpfx)mtrace-tst-loading): Likewise. ($(objpfx)iconv-test.out): Likewise. ($(objpfx)tst-tables.out): Likewise. * intl/Makefile ($(objpfx)mtrace-tst-gettext): Likewise. ($(objpfx)tst-gettext.out): Likewise. ($(objpfx)tst-translit.out): Likewise. ($(objpfx)tst-gettext2.out): Likewise. ($(objpfx)tst-gettext4.out): Likewise. ($(objpfx)tst-gettext6.out): Likewise. * io/Makefile ($(objpfx)ftwtest.out): Likewise. * libio/Makefile ($(objpfx)test-freopen.out): Likewise. ($(objpfx)tst-fopenloc-cmp.out): Likewise. ($(objpfx)tst-fopenloc-mem.out): Likewise. * malloc/Makefile ($(objpfx)tst-mtrace.out): Likewise. * misc/Makefile ($(objpfx)tst-error1-mem): Likewise. * posix/Makefile ($(objpfx)globtest.out): Likewise. ($(objpfx)wordexp-tst.out): Likewise. ($(objpfx)annexc.out): Likewise. ($(objpfx)tst-fnmatch-mem): Likewise. ($(objpfx)bug-regex2-mem): Likewise. ($(objpfx)bug-regex14-mem): Likewise. ($(objpfx)bug-regex21-mem): Likewise. ($(objpfx)bug-regex31-mem): Likewise. ($(objpfx)tst-vfork3-mem): Likewise. ($(objpfx)tst-rxspencer-no-utf8-mem): Likewise. ($(objpfx)tst-pcre-mem): Likewise. ($(objpfx)tst-boost-mem): Likewise. ($(objpfx)tst-getconf.out): Likewise. ($(objpfx)bug-ga2-mem): Likewise. ($(objpfx)bug-glob2-mem): Likewise. * resolv/Makefile ($(objpfx)mtrace-tst-leaks): Likewise. ($(objpfx)mtrace-tst-leaks2): Likewise. * stdio-common/Makefile ($(objpfx)tst-unbputc.out): Likewise. ($(objpfx)tst-printf.out): Likewise. ($(objpfx)tst-setvbuf1.out): Likewise. ($(objpfx)tst-setvbuf1-cmp.out): Likewise. * stdlib/Makefile ($(objpfx)isomac.out): Likewise. ($(objpfx)tst-fmtmsg.out): Likewise. * string/Makefile ($(objpfx)tst-svc-cmp.out): Likewise. * sysdeps/x86/Makefile ($(objpfx)tst-xmmymm.out): Likewise. localedata: * Makefile ($(objpfx)sort-test.out): Use $(evaluate-test). ($(objpfx)tst-fmon.out): Likewise. ($(objpfx)tst-numeric.out): Likewise. ($(objpfx)tst-locale.out): Likewise. ($(objpfx)tst-rpmatch.out): Likewise. ($(objpfx)tst-trans.out): Likewise. ($(objpfx)tst-mbswcs.out): Likewise. ($(objpfx)tst-ctype.out): Likewise. ($(objpfx)tst-wctype.out): Likewise. ($(objpfx)tst-langinfo.out): Likewise. ($(objpfx)mtrace-tst-leaks): Likewise. nptl: * Makefile ($(objpfx)tst-stack3-mem): Use $(evaluate-test). ($(objpfx)tst-tls6.out): Likewise. ($(objpfx)tst-cleanup0.out): Likewise. ($(objpfx)tst-cleanup0-cmp.out): Likewise. ($(objpfx)tst-cancel-wrappers.out): Likewise. ($(objpfx)tst-oddstacklimit.out): Likewise. nptl_db: * Makefile ($(objpfx)db-symbols.out): Use $(evaluate-test).
2014-02-21 21:48:08 +00:00
$(evaluate-test)
Update. 1997-09-16 02:14 Ulrich Drepper <drepper@cygnus.com> Implementation of Hesiod NSS module by Mark Kettenis. * hesiod/Makefile: New file. * hesiod/hesiod.c: New file. * hesiod/hesiod.h: New file. * hesiod/hesiod_p.h: New file. * hesiod/libnss_hesiod.map: New file. * hesiod/nss_hesiod/hesiod-grp.c: New file. * hesiod/nss_hesiod/hesiod-pwd.c: New file. * hesiod/nss_hesiod/hesiod-service.c: New file. * sysdeps/unix/inet/Subdirs: Add hesiod. * shlib-versions: Add version number for libnss_hesiod. * libio/iolibio.h: Remove definition of _IO_* macros. * libio/fileops.c: Define close, fstat, lseek, read, and write as macros to use __ protected versions. Use those functions instead of _IO_* functions. * libio/iopopen.c: Define _IO_close to close. * manual/math.texi: Explain the use of the optimizing inline functions. Describe rand_r function and tell about SysV RNGs in introduction. * resolv/res_send.c (res_send): Use socklen_t type for `fromlen' variable. * string/Makefile (tests): Add noinl-tester. * string/noinl-tester.c: New file. * string/tester.c: Add more stpcpy tests for constant arguments for all short lengths. * string/string.h: Always declare __bzero. Describe __NO_STRING_INLINES. Always include <bits/string.h>. * string/bits/string2.h: Add warning about direct use. Change __strcpy_small and __stpcpy_small implementation to use macros and provide alternative for platforms which cannot do unaligned stores. * sysdeps/i386/bits/string.h: Don't define anything is __NO_STRING_INLINES is defined. * sysdeps/i386/i486/bits/string.h: Change __strcpy_small and __stpcpy_small implementation to use macros and provide alternative for platforms which cannot do unaligned stores. * sysdeps/alpha/bzero.S: Define bzero as weak alias of __bzero. * sysdeps/generic/bzero.c: Likewise. * sysdeps/i386/bzero.c: Likewise. * sysdeps/i386/i586/bzero.S: Likewise. * sysdeps/vax/bzero.s: Likewise. * sysdeps/generic/bits/select.h: Don't use ugly casts to access array. * sysdeps/i386/bits/select.h: Likewise. * sysdeps/i386/fpu/bits/mathinline.c (__finite): Relax register constraints a bit. Don't define and test for _BITS_MATHINLINE_H. Emit warning if used directly and not through math.h. * sysdeps/i386/i486/atomicity.h: Change return type of compare_and_swap to char to get better code. Fix typo. * sysdeps/stub/atomicity.h: Fix typo. 1997-09-14 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de> * sysdeps/generic/stpcpy.c: #undef stpcpy and __stpcpy. 1997-09-14 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de> * string/bits/string2.h: Add prototypes to avoid warning. 1997-09-14 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de> * string/bits/string2.h (strsep): Fix handling of empty REJECT. (__strsep_1c): Handle NULL and empty string. (__strsep_g): Likewise. 1997-09-13 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de> * catgets/Makefile (extra-objs): Set this instead of generated. * md5-crypt/Makefile (extra-objs): Add all object file variants of onlymd5-entry. 1997-09-12 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de> * sysdeps/generic/sysd-stdio.c (__stdio_read): Fix typo in last change. 1997-09-12 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de> * sysdeps/m68k/m68020/atomicity.h: New file. 1997-09-15 05:11 Ulrich Drepper <drepper@cygnus.com> * posix/Makefile (distribute): Add globtest.c and globtest.sh. Compile and run globtest if not cross-compiling. * posix/globtest.c: New file. * posix/globtest.sh: New file. * posix/glob.c: Pretty print preprocessor stuff. (glob_in_dir): If PATTERN is not really a pattern still check whether it is a real file in the current directory and return error if not. Reported by Eugene Mamchits <eugin@ips.ras.ru>. * libio/fileops.c (_IO_file_sync): Acquire lock before doing the work. * libio/ioseekoff.c (_IO_seekoff): Likewise. * libio/ioseekpos.c (_IO_seekpos): Likewise. 1997-09-13 18:06 Ulrich Drepper <drepper@cygnus.com> * configure.in: Prevent configuration for unsupported platforms. 1997-09-13 04:07 Ulrich Drepper <drepper@cygnus.com> * elf/rtld.c (dl_main): Make sure we always have a file argument by testing for < 2 arguments after recognizing the options. 1997-09-12 11:47 Fila Kolodny <fila@ibi.com> * string/bits/string2.h (__strsep_1c): Cast out const from __retval. (__strsep_g): Likewise.
1997-09-16 00:42:43 +00:00
endif
1999-03-19 Andreas Jaeger <aj@arthur.rhein-neckar.de> * rt/Makefile: Link against static library if no shared lib is available. * localedata/Makefile: The shells scripts implementing the test require the dynamic linker which is not available with --disable-shared. Skip the test if --disable-shared is given. * linuxthreads/Makefile: Link test against static libpthread if no shared lib is available. * iconvdata/Makefile (tests): Run iconv-test only if we're building shared libraries. * elf/Makefile (tests): Likewise for elf tests. * posix/Makefile: The test frameworks globtest and wordexp-test require the dynamic linker which is not available with --disable-shared. Skip the test if --disable-shared is given. * grp/Makefile (otherlibs): For static nss build link against necessary libs. * rt/Makefile: Link against static library if no shared lib is available. * localedata/Makefile: The shells scripts implementing the test require the dynamic linker which is not available with --disable-shared. Skip the test if --disable-shared is given. * linuxthreads/Makefile: Link test against static libpthread if no shared lib is available. * iconvdata/Makefile (tests): Run iconv-test only if we're building shared libraries. * elf/Makefile (tests): Likewise for elf tests. * posix/Makefile: The test frameworks globtest and wordexp-test require the dynamic linker which is not available with --disable-shared. Skip the test if --disable-shared is given. * grp/Makefile (otherlibs): For static nss build link against necessary libs. 1999-03-19 Andreas Jaeger <aj@arthur.rhein-neckar.de>
1999-03-20 17:16:44 +00:00
endif
Update. 1997-09-16 02:14 Ulrich Drepper <drepper@cygnus.com> Implementation of Hesiod NSS module by Mark Kettenis. * hesiod/Makefile: New file. * hesiod/hesiod.c: New file. * hesiod/hesiod.h: New file. * hesiod/hesiod_p.h: New file. * hesiod/libnss_hesiod.map: New file. * hesiod/nss_hesiod/hesiod-grp.c: New file. * hesiod/nss_hesiod/hesiod-pwd.c: New file. * hesiod/nss_hesiod/hesiod-service.c: New file. * sysdeps/unix/inet/Subdirs: Add hesiod. * shlib-versions: Add version number for libnss_hesiod. * libio/iolibio.h: Remove definition of _IO_* macros. * libio/fileops.c: Define close, fstat, lseek, read, and write as macros to use __ protected versions. Use those functions instead of _IO_* functions. * libio/iopopen.c: Define _IO_close to close. * manual/math.texi: Explain the use of the optimizing inline functions. Describe rand_r function and tell about SysV RNGs in introduction. * resolv/res_send.c (res_send): Use socklen_t type for `fromlen' variable. * string/Makefile (tests): Add noinl-tester. * string/noinl-tester.c: New file. * string/tester.c: Add more stpcpy tests for constant arguments for all short lengths. * string/string.h: Always declare __bzero. Describe __NO_STRING_INLINES. Always include <bits/string.h>. * string/bits/string2.h: Add warning about direct use. Change __strcpy_small and __stpcpy_small implementation to use macros and provide alternative for platforms which cannot do unaligned stores. * sysdeps/i386/bits/string.h: Don't define anything is __NO_STRING_INLINES is defined. * sysdeps/i386/i486/bits/string.h: Change __strcpy_small and __stpcpy_small implementation to use macros and provide alternative for platforms which cannot do unaligned stores. * sysdeps/alpha/bzero.S: Define bzero as weak alias of __bzero. * sysdeps/generic/bzero.c: Likewise. * sysdeps/i386/bzero.c: Likewise. * sysdeps/i386/i586/bzero.S: Likewise. * sysdeps/vax/bzero.s: Likewise. * sysdeps/generic/bits/select.h: Don't use ugly casts to access array. * sysdeps/i386/bits/select.h: Likewise. * sysdeps/i386/fpu/bits/mathinline.c (__finite): Relax register constraints a bit. Don't define and test for _BITS_MATHINLINE_H. Emit warning if used directly and not through math.h. * sysdeps/i386/i486/atomicity.h: Change return type of compare_and_swap to char to get better code. Fix typo. * sysdeps/stub/atomicity.h: Fix typo. 1997-09-14 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de> * sysdeps/generic/stpcpy.c: #undef stpcpy and __stpcpy. 1997-09-14 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de> * string/bits/string2.h: Add prototypes to avoid warning. 1997-09-14 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de> * string/bits/string2.h (strsep): Fix handling of empty REJECT. (__strsep_1c): Handle NULL and empty string. (__strsep_g): Likewise. 1997-09-13 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de> * catgets/Makefile (extra-objs): Set this instead of generated. * md5-crypt/Makefile (extra-objs): Add all object file variants of onlymd5-entry. 1997-09-12 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de> * sysdeps/generic/sysd-stdio.c (__stdio_read): Fix typo in last change. 1997-09-12 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de> * sysdeps/m68k/m68020/atomicity.h: New file. 1997-09-15 05:11 Ulrich Drepper <drepper@cygnus.com> * posix/Makefile (distribute): Add globtest.c and globtest.sh. Compile and run globtest if not cross-compiling. * posix/globtest.c: New file. * posix/globtest.sh: New file. * posix/glob.c: Pretty print preprocessor stuff. (glob_in_dir): If PATTERN is not really a pattern still check whether it is a real file in the current directory and return error if not. Reported by Eugene Mamchits <eugin@ips.ras.ru>. * libio/fileops.c (_IO_file_sync): Acquire lock before doing the work. * libio/ioseekoff.c (_IO_seekoff): Likewise. * libio/ioseekpos.c (_IO_seekpos): Likewise. 1997-09-13 18:06 Ulrich Drepper <drepper@cygnus.com> * configure.in: Prevent configuration for unsupported platforms. 1997-09-13 04:07 Ulrich Drepper <drepper@cygnus.com> * elf/rtld.c (dl_main): Make sure we always have a file argument by testing for < 2 arguments after recognizing the options. 1997-09-12 11:47 Fila Kolodny <fila@ibi.com> * string/bits/string2.h (__strsep_1c): Cast out const from __retval. (__strsep_g): Likewise.
1997-09-16 00:42:43 +00:00
# If we will use the generic uname implementation, we must figure out what
# it will say by examining the system, and write the results in config-name.h.
uname.c: $(objpfx)config-name.h
$(objpfx)config-name.h: $(..)scripts/config-uname.sh $(common-objpfx)config.make
$(make-target-directory)
$< '$(config-os)' '$(config-release)' \
'$(config-machine)-$(config-vendor)' > $@.new
mv -f $@.new $@
CFLAGS-regex.c = -Wno-strict-prototypes
CFLAGS-getaddrinfo.c = -DRESOLVER -fexceptions
2012-11-14 12:35:10 +00:00
CFLAGS-pause.c = -fexceptions -fasynchronous-unwind-tables
CFLAGS-pread.c = -fexceptions -fasynchronous-unwind-tables
CFLAGS-pread64.c = -fexceptions -fasynchronous-unwind-tables
CFLAGS-pwrite.c = -fexceptions -fasynchronous-unwind-tables
CFLAGS-pwrite64.c = -fexceptions -fasynchronous-unwind-tables
CFLAGS-sleep.c = -fexceptions
CFLAGS-wait.c = -fexceptions -fasynchronous-unwind-tables
CFLAGS-waitid.c = -fexceptions -fasynchronous-unwind-tables
CFLAGS-waitpid.c = -fexceptions -fasynchronous-unwind-tables
CFLAGS-getopt.c = -fexceptions
CFLAGS-wordexp.c = -fexceptions
CFLAGS-wordexp.os = -fomit-frame-pointer
CFLAGS-sysconf.c = -fexceptions -DGETCONF_DIR='"$(libexecdir)/getconf"'
CFLAGS-pathconf.c = -fexceptions
CFLAGS-fpathconf.c = -fexceptions
CFLAGS-spawn.c = -fexceptions
CFLAGS-spawn.os = -fomit-frame-pointer
CFLAGS-spawnp.c = -fexceptions
CFLAGS-spawnp.os = -fomit-frame-pointer
CFLAGS-spawni.c = -fexceptions
CFLAGS-spawni.os = -fomit-frame-pointer
Update. 2003-09-12 Ulrich Drepper <drepper@redhat.com> * grp/Makefile (CFLAGS-getgrgid_r.c, CFLAGS-getgrnam_r.c, CFLAGS-fgetgrent.c, CFLAGS-fgetgrent_r.c, CFLAGS-putgrent.c, CFLAGS-initgroups.c, CFLAGS-getgrgid.c): Add -fexceptions. * inet/Makefile (CFLAGS-either_ntoh.c, CFLAGS-either_hton.c, CFLAGS-getnetgrent.c, CFLAGS-getnetgrent_r.c): Likewise. * io/Makefile (CFLAGS-posix_fallocate.c, CFLAGS-posix_fallocate64.c): Likewise. * misc/Makefile (CFLAGS-err.c): Likewise. * posix/Makefile (CFLAGS-getaddrinfo.c, CFLAGS-spawn.c, CFLAGS-spawnp.c, CFLAGS-spawni.c, CFLAGS-pause.c, CFLAGS-glob.c, CFLAGS-glob64.c): Likewise. * pwd/Makefile (CFLAGS-getpw.c): Likewise. * shadow/Makefile (CFLAGS-fgetspent.c, CFLAGS-fgetspent_r.c, CFLAGS-putspent.c, CFLAGS-getspnam.c, CFLAGS-getspnam_r.c): Likewise. * stdio-common/Makefile (CFLAGS-cuserid.c): Likewise. * sunrpc/Makefile (CFLAGS-openchild.c): Likewise. * stdlib/Makefile (CFLAGS-mkstemp.c): Remove definition. * libio/stdio.h: Remove __THROW from cuserid prototype. * locale/loadarchive.c: Use only non-cancelable interfaces. * resolv/herror.c (herror): Likewise. * malloc/hooks.c: Before using IO stream mark stream so it uses only non-cancelable interfaces. * malloc/malloc.c: Likewise. * posix/getopt.c: Likewise. 2003-09-11 Jakub Jelinek <jakub@redhat.com> * Makerules (LDFLAGS-c.so): Remove -u __register_frame. 2003-09-12 Ulrich Drepper <drepper@redhat.com> * stdio-common/stdio_ext.h: Mark most functions with __THROW. * misc/err.h: Remove __THROW from all prototypes. * posix/getopt.h (__THROW): Define if not already defined. Add __THROW to the getopt functions. 2003-09-11 Ulrich Drepper <drepper@redhat.com> * io/Makefile (CFLAGS-lockf.c): Add -fexceptions. (CFLAGS-fts.c): Likewise. * io/fcntl.h: Remove __THROW from lockf prototypes. * io/fts.h: Remove most __THROW.
2003-09-12 22:37:19 +00:00
CFLAGS-pause.c = -fexceptions
CFLAGS-glob.c = $(uses-callbacks) -fexceptions
CFLAGS-glob64.c = $(uses-callbacks) -fexceptions
CFLAGS-getconf.c = -DGETCONF_DIR='"$(libexecdir)/getconf"'
CFLAGS-execve.os = -fomit-frame-pointer
CFLAGS-fexecve.os = -fomit-frame-pointer
CFLAGS-execv.os = -fomit-frame-pointer
CFLAGS-execle.os = -fomit-frame-pointer
CFLAGS-execl.os = -fomit-frame-pointer
CFLAGS-execvp.os = -fomit-frame-pointer
CFLAGS-execlp.os = -fomit-frame-pointer
Update. 2000-05-17 Jakub Jelinek <jakub@redhat.com> * sysdeps/generic/dl-cache.h (_DL_CACHE_DEFAULT_ID): Only define if not yet defined. (_dl_cache_check_flags): Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/dl-cache.h: include_next dl-cache.h. 2000-05-17 Andreas Jaeger <aj@suse.de> * manual/creature.texi (Feature Test Macros): Remove paragraph since the description is wrong. Closes PR libc/1691, reported by Geoff Clare <gwc@unisoft.com>. 2000-05-17 Andreas Jaeger <aj@suse.de> * time/test_time.args: Removed. * time/Makefile (test_time-ARGS): Added contents here instead. * posix/tstgetopt.args: Removed. * posix/Makefile (tstgetopt-ARGS): Added contents here instead. * Rules: Allow arguments for test files to be specified in Makefile with testname-ARGS; remove rules with .args in it. * dirent/Makefile (opendir-tst1-ARGS): Use this for opendir-tst1, remove old bogus rule for opendir-tst1.args. * stdlib/test-canon.c: Rewrite to use test-skeleton.c. * stdlib/Makefile (test-canon-ARGS): New, supply argument to chdir into objdir. This allows a readonly sourcetree. Reported by lrgallardo@yahoo.com, closes PR libc/1421. 2000-05-16 Andreas Jaeger <aj@suse.de>, David Huggins-Daines <dhd@linuxcare.com> * sysdeps/generic/dl-cache.c (_dl_load_cache_lookup): Set cache_data in case of only new cache format correctly. * sysdeps/generic/dl-cache.c (_dl_load_cache_lookup): Align struct cache_file_new. * sysdeps/generic/dl-cache.h (ALIGN_CACHE): New macro to align struct cache_file_new. * elf/cache.c (save_cache): Fix str_offset if only new cache is present. * elf/cache.c (save_cache): Align struct new_file_cache. (print_cache): Likewise.
2000-05-17 11:04:21 +00:00
tstgetopt-ARGS = -a -b -cfoobar --required foobar --optional=bazbug \
--none random --col --color --colour
Wed Jan 24 04:18:36 1996 Paul Eggert <eggert@twinsun.com> * strftime.c (strftime): When invoking self, check whether the subsidiary invocation failed. Use "???" (not "") to denote unknown time zone information. Make this source file portable to standalone contexts (e.g. GNU Emacs). <config.h>: Include if HAVE_CONFIG_H is defined. (HAVE_LIMITS_H, HAVE_MBLEN, HAVE_TM_ZONE, STDC_HEADERS): New symbols, defined if _LIBC or if <config.h> defines them. <ansidecl.h>, "../locale/localeinfo.h": Include only if _LIBC. <sys/types.h>: New include; some hosts require it for `time_t'. <ctype.h>: Include only if HAVE_MBLEN (since it's only needed then). <limits.h>: Include only if HAVE_LIMITS_H. <stddef.h, stdlib.h, string.h>: Include only if STDC_HEADERS. (memcpy): Define in terms of bcopy if !STDC_HEADERS. (__P, PTR): Define if not already defined. (__tzname, __daylight, __timezone): Remove macros; no longer needed. (add, strftime): Don't use NULL, for portability to some weird hosts. (fmt): If !_LIBC, don't assume sprintf returns a count. (week, strftime): Use old-style function declarations. (weekday_name, month_name): New constants. (strftime): Use traditional C values if locale support isn't available. Use `const' instead of CONST. For time zones, use tm_zone if possible, then fall back on tzname. Don't check for multibyte characters unless mblen is supported. Use formats like %02d instead of %.2d, for portability to older hosts. Wed Jan 24 04:18:36 1996 Paul Eggert <eggert@twinsun.com> * strftime.c (strftime): When invoking self, check whether the subsidiary invocation failed. Use "???" (not "") to denote unknown time zone information. Make this source file portable to standalone contexts (e.g. GNU Emacs). <config.h>: Include if HAVE_CONFIG_H is defined. (HAVE_LIMITS_H, HAVE_MBLEN, HAVE_TM_ZONE, STDC_HEADERS): New symbols, defined if _LIBC or if <config.h> defines them. <ansidecl.h>, "../locale/localeinfo.h": Include only if _LIBC. <sys/types.h>: New include; some hosts require it for `time_t'. <ctype.h>: Include only if HAVE_MBLEN (since it's only needed then). <limits.h>: Include only if HAVE_LIMITS_H. <stddef.h, stdlib.h, string.h>: Include only if STDC_HEADERS. (memcpy): Define in terms of bcopy if !STDC_HEADERS. (__P, PTR): Define if not already defined. (__tzname, __daylight, __timezone): Remove macros; no longer needed. (add, strftime): Don't use NULL, for portability to some weird hosts. (fmt): If !_LIBC, don't assume sprintf returns a count. (week, strftime): Use old-style function declarations. (weekday_name, month_name): New constants. (strftime): Use traditional C values if locale support isn't available. Use `const' instead of CONST. For time zones, use tm_zone if possible, then fall back on tzname. Don't check for multibyte characters unless mblen is supported. Use formats like %02d instead of %.2d, for portability to older hosts. Wed Jan 24 00:07:52 1996 Roland McGrath <roland@churchy.gnu.ai.mit.edu> * stdio-common/vfscanf.c (GROUP, MALLOC): New flag macros. (__vfscanf): Eliminate flag vars that were redundant with FLAGS bits. Fix bug in recognition of %ll flag for long long. Fix overeager checks for conflicting type modifiers. With ' flag, match thousands separators for decimal numbers. Tue Jan 23 22:02:40 1996 Roland McGrath <roland@churchy.gnu.ai.mit.edu> * locale/Makefile (CFLAGS-locfile-lex.c): New variable. * resolv/Makefile (CFLAGS): Disable some warnings. * sysdeps/generic/Makefile (elided-routines): Removed hypot. (+gccwarn): Set with override. * stdio-common/Makefile (CFLAGS-tst-printf.c): New variable. * posix/Makefile (CFLAGS-regex.c): New variable. * malloc/Makefile (CFLAGS-obstack.c): New variable. * io/Makefile (CFLAGS-fts.c): New variable. * io/fts.c (fts_open): Use prototypes for COMPAR decl. Tue Jan 23 21:35:32 1996 Miles Bader <miles@gnu.ai.mit.edu> * sysdeps/mach/hurd/bind.c (bind): Ensure NAME for the AF_LOCAL case is '\0'-terminated. Tue Jan 23 19:49:54 1996 Roland McGrath <roland@churchy.gnu.ai.mit.edu> * elf/rtld.c (dl_main): Support additional args in --list mode for debugging: look them up as symbol names and print values. * misc/getttyent.c (skip, value): Declare with prototypes in file scope. * csu/initfini.c (_init): Explicitly set a variable that is pointer to volatile with the address of __gmon_start__, to avoid the test being optimized out.
1996-01-24 06:03:37 +00:00
tst-exec-ARGS = -- $(host-test-program-cmd)
tst-exec-static-ARGS = $(tst-exec-ARGS)
tst-spawn-ARGS = -- $(host-test-program-cmd)
tst-spawn-static-ARGS = $(tst-spawn-ARGS)
tst-dir-ARGS = `pwd` `cd $(common-objdir)/$(subdir); pwd` `cd $(common-objdir); pwd` $(objpfx)tst-dir
tst-chmod-ARGS = $(objdir)
tst-vfork3-ARGS = --test-dir=$(objpfx)
tst-rxspencer-ARGS = --utf8 rxspencer/tests
Split up rules for tests using mtrace and something else. Most glibc tests that use mtrace to verify that there were no memory leaks from the glibc facilities used in a given test depend on the .out file of the previous test so that the mtrace test runs mtrace and nothing else. Two, however, have a single target combining mtrace with something else. In the case of libio/tst-fopenloc.check, the test both compares the output with an expected baseline and runs mtrace. In the case of posix/tst-rxspencer-mem, the test is run (with different command line from the main run) and then mtrace is run, from the same makefile target. This patch splits both of these tests up to use separate makefile targets for each thing tested; in the tst-rxspencer case, a file tst-rxspencer-no-utf8.c is created that just includes tst-rxspencer.c, as is usual for tests where the same code gets tested in different compile-time or runtime configurations. Adding $(evaluate-test) to test commands, as in <https://sourceware.org/ml/libc-alpha/2014-01/msg00194.html>, will no longer need to insert && between multiple commands, as all tests will either have just a single command or already use &&. Tested x86_64. * libio/Makefile ($(objpfx)tst-fopenloc.check): Split into separate $(objpfx)tst-fopenloc-cmp.out and $(objpfx)tst-fopenloc-mem.out targets. (tests): Update dependencies. * posix/Makefile (tests variable): Add tst-rxspencer-no-utf8. (generated): Change tst-rxspencer-mem and tst-rxspencer.mtrace to tst-rxspencer-no-utf8-mem and tst-rxspencer-no-utf8.mtrace. (tst-rxspencer-no-utf8-ARGS): New variable. (tst-rxspencer-no-utf8-ENV): Likewise. (tests target): Depend on $(objpfx)tst-rxspencer-no-utf8-mem instead of $(objpfx)tst-rxspencer-mem. ($(objpfx)tst-rxspencer-mem): Change target to $(objpfx)tst-rxspencer-no-utf8-mem. Depend on $(objpfx)tst-rxspencer-no-utf8.out instead of running test program. * posix/tst-rxspencer-no-utf8.c: New file.
2014-02-14 13:45:14 +00:00
tst-rxspencer-no-utf8-ARGS = rxspencer/tests
tst-pcre-ARGS = PCRE.tests
tst-boost-ARGS = BOOST.tests
bug-glob1-ARGS = "$(objpfx)"
tst-execvp3-ARGS = --test-dir=$(objpfx)
Update. 1997-03-08 05:30 Ulrich Drepper <drepper@cygnus.com> * argp/Makefile (routines): Add argp-eexst. * argp/argp-ba.c (argp_program_bug_address): Make `const'. * argp/argp-eexst.c: New file. Define exit status variable. * argp/argp-help.c (__argp_state_help): Use argp_err_exit_status variable instead of always exiting with value 1. * argp/argp-pv.c (argp_program_version): Make `const'. * argp/argp.h: Declare argp_err_exit_status. Patches by Miles Bader <miles@gnu.ai.mit.edu>. * locale/programs/localedef.c: Use argp_err_exit_status to terminate with correct value. * inet/rcmd.c (iruserok): Use euidaccess instead of half-hearted switching of UID before opening .rhosts. * libio/vsnprintf.c: Change implementation to follow ISO C 9X proposal. The return value now is always the number of characters which would be written if enough space is available. * manual/stdio.texi: Update description for new behaviour. * locale/locale.h (__locale_t): Don't use __locale_t for struct name and pointer to struct since old gccs cannot keep the namespaces apart. Rename struct to __locale_struct. * locale/duplocale.h: Likewise. * locale/newlocale.h: Likewise. * math/Makefile (headers): Add complex.h and cmathcalls.h. (routines): Remove w_cabs. Add conj, cimag, creal, and cabs. * math/math.h: Undefine __MATHDECL_1, __MATHDECL, and __MATHCALL after use. (signgam): Move declaration to here from mathcalls.h. * math/mathcalls.h (cabs, __cabs_complex, signgam): Remove definition. Correct comment for fmin and fmax. Start implementing complex math function from ISO C 9X. * math/complex.h: New file. * math/cmathcalls.h: New file. * math/cabs.c: New file. * math/cabsf.c: New file. * math/cabsl.c: New file. * math/cimag.c: New file. * math/cimagf.c: New file. * math/cimagl.c: New file. * math/conj.c: New file. * math/conjf.c: New file. * math/conjl.c: New file. * math/creal.c: New file. * math/crealf.c: New file. * math/creall.c: New file. * sysdeps/libm-ieee754/w_cabs.c: Removed. * sysdeps/libm-ieee754/w_cabsf.c: Removed. * sysdeps/libm-ieee754/w_cabsl.c: Removed. * posix/regex.c: Merge with regex sources from Arnold Robbins' version in GNU awk. * posix/regex.h: Likewise. Add regex test suite by Tom Lord. * posix/Makefile (distribute): Add TESTS, TESTS2C.sed, and testcases.h. (tests): Add runtests. (before-compile): Add testcases.h. (testcases.h): New rule to generate header with tests. * posix/TESTS: New file. * posix/TESTS2C.sed.: New file. * posix/runtests.c: New file. * posix/testcases.h: New file. * sysdeps/unix/sysv/linux/poll.c: Test whether poll syscall is available and use fall-back implementation if not. * sysdeps/unix/sysv/linux/syscalls.list: Sort entries. * time/ialloc.c: Update from tzcode1997c. * time/private.h: Likewise. * time/scheck.c: Likewise. * time/tzselect.ksh: Likewise. * time/zdump.c: Likewise. * time/zic.c: Likewise. * time/tzfile.c: Pretty print. 1997-03-06 07:37 Geoff Keating <geoffk@ozemail.com.au> Port to powerpc-*-linux-gnu. Slightly tested, under MkLinux, on a 601. * sysdeps/powerpc/Implies: Added. * sysdeps/powerpc/__longjmp.S: Added. * sysdeps/powerpc/__math.h: Added. * sysdeps/powerpc/bsd-_setjmp.S: Added. * sysdeps/powerpc/bsd-setjmp.S: Added. * sysdeps/powerpc/dl-machine.h: Added. * sysdeps/powerpc/ffs.c: Added. * sysdeps/powerpc/fpu_control.h: Added. * sysdeps/powerpc/jmp_buf.h: Added. * sysdeps/powerpc/setjmp.S: Added. * sysdeps/powerpc/strlen.s: Added. * sysdeps/powerpc/elf/start.c: Added. * sysdeps/powerpc/fpu_control.h: Added. * sysdeps/powerpc/jmp_buf.h: Added. * sysdeps/unix/sysv/linux/powerpc/Dist: Added. * sysdeps/unix/sysv/linux/powerpc/_exit.S: Added. * sysdeps/unix/sysv/linux/powerpc/brk.c: Added. * sysdeps/unix/sysv/linux/powerpc/clone.S: Added. * sysdeps/unix/sysv/linux/powerpc/init-first.h: Added. * sysdeps/unix/sysv/linux/powerpc/ioctl-types.h: Added. * sysdeps/unix/sysv/linux/powerpc/profil.c: Added. * sysdeps/unix/sysv/linux/powerpc/sigreturn.S: Added. * sysdeps/unix/sysv/linux/powerpc/socket.S: Added. * sysdeps/unix/sysv/linux/powerpc/syscall.S: Added. * sysdeps/unix/sysv/linux/powerpc/syscalls.list: Added. * sysdeps/unix/sysv/linux/powerpc/sysdep.c: Added. * sysdeps/unix/sysv/linux/powerpc/sysdep.h: Added. * sysdeps/unix/sysv/linux/powerpc/termbits.h: Added. * sysdeps/unix/sysv/linux/powerpc/sys/syscall.h: Added. 1997-03-05 05:24 Geoff Keating <geoffk@ozemail.com.au> * elf/dl-runtime.c (fixup): Add ELF_FIXUP_RETURNS_ADDRESS switch, because knowing the first instruction of a PowerPC PLT trampoline is not very helpful. 1997-03-04 08:04 Geoff Keating <geoffk@ozemail.com.au> * elf/dl-load.c (ELF_PREFERRED_ADDRESS, ELF_PREFERRED_ADDRESS_DATA, ELF_FIXED_ADDRESS): Added. These are for dl-machine.h to indicate a preference as to where executables should be loaded. 1997-02-28 08:50 Geoff Keating <geoffk@ozemail.com.au> * elf/elf.h: Add in all those PowerPC reloc types. 1997-02-24 07:12 Geoff Keating <geoffk@ozemail.com.au> * stdio-common/vfscanf.c: Use __va_copy if available. 1997-03-06 13:50 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de> * malloc/malloc.c (mprotect) [_LIBC]: Define as __mprotect to clean up namespace. 1997-03-07 14:27 Ulrich Drepper <drepper@cygnus.com> * sysdeps/libm-ieee754/s_fpclassify.c (__fpclassify): Don't use non-existing GET_WORDS macro, use EXTRACT_WORDS. Reported by Andres Schwab <schwab@issan.informatik.uni-dortmund.de>. 1997-03-07 05:27 Ulrich Drepper <drepper@cygnus.com> * sysdeps/unix/sysv/linux/i386/sigaction.c: The user- and kernel-level sigaction structure is different. handle this correctly. Bug report by Andres Jaeger <jaeger@informatik.uni-kl.de>. 1997-03-06 05:55 David Engel <david@sw.ods.com> * sysdeps/generic/dl-cache.c (_dl_load_cache_lookup): Also recognize cache entries with flag == 3. 1997-03-06 01:05 Ulrich Drepper <drepper@cygnus.com> * sysdeps/generic/netinet/in.h (INADDR_NONE): Cast to unsigned int. (INADDR_LOOPBACK): Likewise. * sysdeps/unix/sysv/linux/netinet/in.h: Likewise. * manual/socket.texi: Correct types of INADDR_* constants from unsigned long to unsigned. 1997-03-05 23:14 Ulrich Drepper <drepper@cygnus.com> * time/antarctica: Update from tzdata1997c. * time/asia: Likewise. * time/zone.tab: Likewise. 1997-03-05 00:43 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de> * configure.in (libc_cv_asm_symver_directive, libc_cv_ld_version_script_option): Remove unknown instruction from assembler test file. 1997-03-04 19:14 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de> * sysdeps/m68k/fpu/__math.h: Update feature tests to use __USE_ISOC9X. [__USE_ISOC9X]: Define __log2 and __exp2 inlines. (fabs): Remove defininition, it is a gcc builtin. (sqrt, __sqrt): Remove definition, they have wrappers in libm. 1997-03-04 10:11 H.J. Lu <hjl@lucon.org> * sunrpc/Makefile ($(objpfx)rpc-proto.c): Create subdir before generating file. 1997-03-05 03:59 Ulrich Drepper <drepper@cygnus.com> * inet/rcmd.c (__ivaliduser): Don't use getline, but __getline instead to avoid namespace problems. Reported by David Mosberger-Tang <davidm@AZStarNet.COM>. 1997-03-03 19:01 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de> * login/utmp_file.c: Fix previous change. Make portable by checking the _HAVE_UT_* feature macros. * libio/fileops.c (_IO_file_finish): Likewise.
1997-03-08 05:28:20 +00:00
testcases.h: TESTS TESTS2C.sed
2013-03-09 04:31:23 +00:00
LC_ALL=C sed -f TESTS2C.sed < $< > $@T
Update. 1997-03-08 05:30 Ulrich Drepper <drepper@cygnus.com> * argp/Makefile (routines): Add argp-eexst. * argp/argp-ba.c (argp_program_bug_address): Make `const'. * argp/argp-eexst.c: New file. Define exit status variable. * argp/argp-help.c (__argp_state_help): Use argp_err_exit_status variable instead of always exiting with value 1. * argp/argp-pv.c (argp_program_version): Make `const'. * argp/argp.h: Declare argp_err_exit_status. Patches by Miles Bader <miles@gnu.ai.mit.edu>. * locale/programs/localedef.c: Use argp_err_exit_status to terminate with correct value. * inet/rcmd.c (iruserok): Use euidaccess instead of half-hearted switching of UID before opening .rhosts. * libio/vsnprintf.c: Change implementation to follow ISO C 9X proposal. The return value now is always the number of characters which would be written if enough space is available. * manual/stdio.texi: Update description for new behaviour. * locale/locale.h (__locale_t): Don't use __locale_t for struct name and pointer to struct since old gccs cannot keep the namespaces apart. Rename struct to __locale_struct. * locale/duplocale.h: Likewise. * locale/newlocale.h: Likewise. * math/Makefile (headers): Add complex.h and cmathcalls.h. (routines): Remove w_cabs. Add conj, cimag, creal, and cabs. * math/math.h: Undefine __MATHDECL_1, __MATHDECL, and __MATHCALL after use. (signgam): Move declaration to here from mathcalls.h. * math/mathcalls.h (cabs, __cabs_complex, signgam): Remove definition. Correct comment for fmin and fmax. Start implementing complex math function from ISO C 9X. * math/complex.h: New file. * math/cmathcalls.h: New file. * math/cabs.c: New file. * math/cabsf.c: New file. * math/cabsl.c: New file. * math/cimag.c: New file. * math/cimagf.c: New file. * math/cimagl.c: New file. * math/conj.c: New file. * math/conjf.c: New file. * math/conjl.c: New file. * math/creal.c: New file. * math/crealf.c: New file. * math/creall.c: New file. * sysdeps/libm-ieee754/w_cabs.c: Removed. * sysdeps/libm-ieee754/w_cabsf.c: Removed. * sysdeps/libm-ieee754/w_cabsl.c: Removed. * posix/regex.c: Merge with regex sources from Arnold Robbins' version in GNU awk. * posix/regex.h: Likewise. Add regex test suite by Tom Lord. * posix/Makefile (distribute): Add TESTS, TESTS2C.sed, and testcases.h. (tests): Add runtests. (before-compile): Add testcases.h. (testcases.h): New rule to generate header with tests. * posix/TESTS: New file. * posix/TESTS2C.sed.: New file. * posix/runtests.c: New file. * posix/testcases.h: New file. * sysdeps/unix/sysv/linux/poll.c: Test whether poll syscall is available and use fall-back implementation if not. * sysdeps/unix/sysv/linux/syscalls.list: Sort entries. * time/ialloc.c: Update from tzcode1997c. * time/private.h: Likewise. * time/scheck.c: Likewise. * time/tzselect.ksh: Likewise. * time/zdump.c: Likewise. * time/zic.c: Likewise. * time/tzfile.c: Pretty print. 1997-03-06 07:37 Geoff Keating <geoffk@ozemail.com.au> Port to powerpc-*-linux-gnu. Slightly tested, under MkLinux, on a 601. * sysdeps/powerpc/Implies: Added. * sysdeps/powerpc/__longjmp.S: Added. * sysdeps/powerpc/__math.h: Added. * sysdeps/powerpc/bsd-_setjmp.S: Added. * sysdeps/powerpc/bsd-setjmp.S: Added. * sysdeps/powerpc/dl-machine.h: Added. * sysdeps/powerpc/ffs.c: Added. * sysdeps/powerpc/fpu_control.h: Added. * sysdeps/powerpc/jmp_buf.h: Added. * sysdeps/powerpc/setjmp.S: Added. * sysdeps/powerpc/strlen.s: Added. * sysdeps/powerpc/elf/start.c: Added. * sysdeps/powerpc/fpu_control.h: Added. * sysdeps/powerpc/jmp_buf.h: Added. * sysdeps/unix/sysv/linux/powerpc/Dist: Added. * sysdeps/unix/sysv/linux/powerpc/_exit.S: Added. * sysdeps/unix/sysv/linux/powerpc/brk.c: Added. * sysdeps/unix/sysv/linux/powerpc/clone.S: Added. * sysdeps/unix/sysv/linux/powerpc/init-first.h: Added. * sysdeps/unix/sysv/linux/powerpc/ioctl-types.h: Added. * sysdeps/unix/sysv/linux/powerpc/profil.c: Added. * sysdeps/unix/sysv/linux/powerpc/sigreturn.S: Added. * sysdeps/unix/sysv/linux/powerpc/socket.S: Added. * sysdeps/unix/sysv/linux/powerpc/syscall.S: Added. * sysdeps/unix/sysv/linux/powerpc/syscalls.list: Added. * sysdeps/unix/sysv/linux/powerpc/sysdep.c: Added. * sysdeps/unix/sysv/linux/powerpc/sysdep.h: Added. * sysdeps/unix/sysv/linux/powerpc/termbits.h: Added. * sysdeps/unix/sysv/linux/powerpc/sys/syscall.h: Added. 1997-03-05 05:24 Geoff Keating <geoffk@ozemail.com.au> * elf/dl-runtime.c (fixup): Add ELF_FIXUP_RETURNS_ADDRESS switch, because knowing the first instruction of a PowerPC PLT trampoline is not very helpful. 1997-03-04 08:04 Geoff Keating <geoffk@ozemail.com.au> * elf/dl-load.c (ELF_PREFERRED_ADDRESS, ELF_PREFERRED_ADDRESS_DATA, ELF_FIXED_ADDRESS): Added. These are for dl-machine.h to indicate a preference as to where executables should be loaded. 1997-02-28 08:50 Geoff Keating <geoffk@ozemail.com.au> * elf/elf.h: Add in all those PowerPC reloc types. 1997-02-24 07:12 Geoff Keating <geoffk@ozemail.com.au> * stdio-common/vfscanf.c: Use __va_copy if available. 1997-03-06 13:50 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de> * malloc/malloc.c (mprotect) [_LIBC]: Define as __mprotect to clean up namespace. 1997-03-07 14:27 Ulrich Drepper <drepper@cygnus.com> * sysdeps/libm-ieee754/s_fpclassify.c (__fpclassify): Don't use non-existing GET_WORDS macro, use EXTRACT_WORDS. Reported by Andres Schwab <schwab@issan.informatik.uni-dortmund.de>. 1997-03-07 05:27 Ulrich Drepper <drepper@cygnus.com> * sysdeps/unix/sysv/linux/i386/sigaction.c: The user- and kernel-level sigaction structure is different. handle this correctly. Bug report by Andres Jaeger <jaeger@informatik.uni-kl.de>. 1997-03-06 05:55 David Engel <david@sw.ods.com> * sysdeps/generic/dl-cache.c (_dl_load_cache_lookup): Also recognize cache entries with flag == 3. 1997-03-06 01:05 Ulrich Drepper <drepper@cygnus.com> * sysdeps/generic/netinet/in.h (INADDR_NONE): Cast to unsigned int. (INADDR_LOOPBACK): Likewise. * sysdeps/unix/sysv/linux/netinet/in.h: Likewise. * manual/socket.texi: Correct types of INADDR_* constants from unsigned long to unsigned. 1997-03-05 23:14 Ulrich Drepper <drepper@cygnus.com> * time/antarctica: Update from tzdata1997c. * time/asia: Likewise. * time/zone.tab: Likewise. 1997-03-05 00:43 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de> * configure.in (libc_cv_asm_symver_directive, libc_cv_ld_version_script_option): Remove unknown instruction from assembler test file. 1997-03-04 19:14 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de> * sysdeps/m68k/fpu/__math.h: Update feature tests to use __USE_ISOC9X. [__USE_ISOC9X]: Define __log2 and __exp2 inlines. (fabs): Remove defininition, it is a gcc builtin. (sqrt, __sqrt): Remove definition, they have wrappers in libm. 1997-03-04 10:11 H.J. Lu <hjl@lucon.org> * sunrpc/Makefile ($(objpfx)rpc-proto.c): Create subdir before generating file. 1997-03-05 03:59 Ulrich Drepper <drepper@cygnus.com> * inet/rcmd.c (__ivaliduser): Don't use getline, but __getline instead to avoid namespace problems. Reported by David Mosberger-Tang <davidm@AZStarNet.COM>. 1997-03-03 19:01 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de> * login/utmp_file.c: Fix previous change. Make portable by checking the _HAVE_UT_* feature macros. * libio/fileops.c (_IO_file_finish): Likewise.
1997-03-08 05:28:20 +00:00
mv -f $@T $@
ptestcases.h: PTESTS PTESTS2C.sed
2013-03-09 04:31:23 +00:00
LC_ALL=C sed -f PTESTS2C.sed < $< > $@T
mv -f $@T $@
test-xfail-annexc = yes
$(objpfx)annexc.out: $(objpfx)annexc
$(dir $<)$(notdir $<) '$(CC)' \
Generate .test-result files for tests with special rules. This patch, an updated version of <https://sourceware.org/ml/libc-alpha/2014-01/msg00194.html> now proposed for inclusion in glibc, extends the generation of PASS and FAIL status in .test-result files for individual tests to cover tests with their own custom makefile rules. This is just adding $(evaluate-test) calls to all such rules, since tests with multiple commands were previously split into separate tests. Note that the tests the makefiles expect to fail (posix/annexc and conformtest) currently get FAIL listed in the .test-result file, rather than XFAIL; a subsequent patch will introduce a better XFAIL mechanism. Tested x86_64. * Makefile ($(objpfx)c++-types-check.out): Use $(evaluate-test). ($(objpfx)check-local-headers.out): Likewise. ($(objpfx)begin-end-check.out): Likewise. * Makerules (check-abi-%.out): Likewise. * catgets/Makefile ($(objpfx)test1.cat): Likewise. ($(objpfx)test2.cat): Likewise. ($(objpfx)de/libc.cat): Likewise. ($(objpfx)test-gencat.out): Likewise. * conform/Makefile ($(objpfx)run-conformtest.out): Likewise. * elf/Makefile ($(objpfx)order-cmp.out): Likewise. ($(objpfx)noload-mem): Likewise. ($(objpfx)tst-pathopt.out): Likewise. ($(objpfx)tst-rtld-load-self.out): Likewise. ($(objpfx)tst-array1-cmp.out): Likewise. ($(objpfx)tst-array1-static-cmp.out): Likewise. ($(objpfx)tst-array2-cmp.out): Likewise. ($(objpfx)tst-array3-cmp.out): Likewise. ($(objpfx)tst-array4-cmp.out): Likewise. ($(objpfx)tst-array5-cmp.out): Likewise. ($(objpfx)tst-array5-static-cmp.out): Likewise. ($(objpfx)check-textrel.out): Likewise. ($(objpfx)check-execstack.out): Likewise. ($(objpfx)check-localplt.out): Likewise. ($(objpfx)order2-cmp.out): Likewise. ($(objpfx)tst-leaks1-mem): Likewise. ($(objpfx)tst-leaks1-static-mem): Likewise. ($(objpfx)tst-initorder-cmp.out): Likewise. ($(objpfx)tst-initorder2-cmp.out): Likewise. ($(objpfx)tst-unused-dep.out): Likewise. ($(objpfx)tst-unused-dep-cmp.out): Likewise. * grp/Makefile ($(objpfx)tst_fgetgrent.out): Likewise. * iconv/Makefile (test-iconvconfig): Likewise. * iconvdata/Makefile ($(objpfx)mtrace-tst-loading): Likewise. ($(objpfx)iconv-test.out): Likewise. ($(objpfx)tst-tables.out): Likewise. * intl/Makefile ($(objpfx)mtrace-tst-gettext): Likewise. ($(objpfx)tst-gettext.out): Likewise. ($(objpfx)tst-translit.out): Likewise. ($(objpfx)tst-gettext2.out): Likewise. ($(objpfx)tst-gettext4.out): Likewise. ($(objpfx)tst-gettext6.out): Likewise. * io/Makefile ($(objpfx)ftwtest.out): Likewise. * libio/Makefile ($(objpfx)test-freopen.out): Likewise. ($(objpfx)tst-fopenloc-cmp.out): Likewise. ($(objpfx)tst-fopenloc-mem.out): Likewise. * malloc/Makefile ($(objpfx)tst-mtrace.out): Likewise. * misc/Makefile ($(objpfx)tst-error1-mem): Likewise. * posix/Makefile ($(objpfx)globtest.out): Likewise. ($(objpfx)wordexp-tst.out): Likewise. ($(objpfx)annexc.out): Likewise. ($(objpfx)tst-fnmatch-mem): Likewise. ($(objpfx)bug-regex2-mem): Likewise. ($(objpfx)bug-regex14-mem): Likewise. ($(objpfx)bug-regex21-mem): Likewise. ($(objpfx)bug-regex31-mem): Likewise. ($(objpfx)tst-vfork3-mem): Likewise. ($(objpfx)tst-rxspencer-no-utf8-mem): Likewise. ($(objpfx)tst-pcre-mem): Likewise. ($(objpfx)tst-boost-mem): Likewise. ($(objpfx)tst-getconf.out): Likewise. ($(objpfx)bug-ga2-mem): Likewise. ($(objpfx)bug-glob2-mem): Likewise. * resolv/Makefile ($(objpfx)mtrace-tst-leaks): Likewise. ($(objpfx)mtrace-tst-leaks2): Likewise. * stdio-common/Makefile ($(objpfx)tst-unbputc.out): Likewise. ($(objpfx)tst-printf.out): Likewise. ($(objpfx)tst-setvbuf1.out): Likewise. ($(objpfx)tst-setvbuf1-cmp.out): Likewise. * stdlib/Makefile ($(objpfx)isomac.out): Likewise. ($(objpfx)tst-fmtmsg.out): Likewise. * string/Makefile ($(objpfx)tst-svc-cmp.out): Likewise. * sysdeps/x86/Makefile ($(objpfx)tst-xmmymm.out): Likewise. localedata: * Makefile ($(objpfx)sort-test.out): Use $(evaluate-test). ($(objpfx)tst-fmon.out): Likewise. ($(objpfx)tst-numeric.out): Likewise. ($(objpfx)tst-locale.out): Likewise. ($(objpfx)tst-rpmatch.out): Likewise. ($(objpfx)tst-trans.out): Likewise. ($(objpfx)tst-mbswcs.out): Likewise. ($(objpfx)tst-ctype.out): Likewise. ($(objpfx)tst-wctype.out): Likewise. ($(objpfx)tst-langinfo.out): Likewise. ($(objpfx)mtrace-tst-leaks): Likewise. nptl: * Makefile ($(objpfx)tst-stack3-mem): Use $(evaluate-test). ($(objpfx)tst-tls6.out): Likewise. ($(objpfx)tst-cleanup0.out): Likewise. ($(objpfx)tst-cleanup0-cmp.out): Likewise. ($(objpfx)tst-cancel-wrappers.out): Likewise. ($(objpfx)tst-oddstacklimit.out): Likewise. nptl_db: * Makefile ($(objpfx)db-symbols.out): Use $(evaluate-test).
2014-02-21 21:48:08 +00:00
'$(patsubst %,-I../%,$(sorted-subdirs)) -I../include $(+sysdep-includes) $(sysincludes) -I..' > $@; \
$(evaluate-test)
annexc-CFLAGS = -O
$(objpfx)annexc: annexc.c
$(native-compile)
2010-11-12 08:51:28 +00:00
tst-fnmatch-ENV += MALLOC_TRACE=$(objpfx)tst-fnmatch.mtrace
Make tests consistently use *.out output files. This patch systematically renames miscellaneous tests so their outputs use a *.out name (unless the test is just running some glibc program with its conventional output file name, rather than a special program at all, as in catgets tests generating *.cat). In the case of the iconv test test-iconvconfig, output is redirected where it wasn't before. In various places the "generated" variable is updated to reflect the revised test names; in iconvdata/Makefile a typo (mmtrace-tst-loading) is also fixed. resolv/Makefile sets both "generate" (which appears unused) and "generated". Bitrot in the settings of these variables could no doubt be fixed so that "make clean" after build and testing leaves results the same as after configure (and indeed the tests-special / xtests-special variables could be used to simplify things, by removing those files automatically rather than listing them manually in these variables), and "make distclean" leaves an empty build directory, but right now it appears various files don't get deleted. I think they are liable to continue to bitrot in the absence of routine testing that these targets actually work, given that building in the source directory isn't supported and that was the main use of such makefile targets. Tested x86_64. * elf/Makefile (tests-special): Rename tests to end with .out. ($(objpfx)noload-mem): Likewise. ($(objpfx)tst-leaks1-mem): Likewise. ($(objpfx)tst-leaks1-static-mem.out): Likewise. * iconv/Makefile (xtests-special): Change test-iconvconfig to $(objpfx)test-iconvconfig.out. (test-iconvconfig): Change to $(objpfx)test-iconvconfig.out. Use set -e inside subshell and redirect output to file. * iconvdata/Makefile (generated): Rename tests to end with .out. Correct type. (tests-special): Rename tests to end with .out. ($(objpfx)mtrace-tst-loading): Likewise. * intl/Makefile (generated): Likewise. (tests-special): Likewise. ($(objpfx)mtrace-tst-gettext): Likewise. * misc/Makefile (generated): Likewise. (tests-special): Likewise. ($(objpfx)tst-error1-mem): Likewise. * nptl/Makefile (tests-special): Likewise. ($(objpfx)tst-stack3-mem): Likewise. (generated): Likewise. * posix/Makefile (generated): Likewise. (tests-special): Likewise. (xtests-special): Likewise. ($(objpfx)tst-fnmatch-mem): Likewise. ($(objpfx)bug-regex2-mem): Likewise. ($(objpfx)bug-regex14-mem): Likewise. ($(objpfx)bug-regex21-mem): Likewise. ($(objpfx)bug-regex31-mem): Likewise. ($(objpfx)tst-vfork3-mem): Likewise. ($(objpfx)tst-rxspencer-no-utf8-mem): Likewise. ($(objpfx)tst-pcre-mem): Likewise. ($(objpfx)tst-boost-mem): Likewise. ($(objpfx)bug-ga2-mem): Likewise. ($(objpfx)bug-glob2-mem): Likewise. * resolv/Makefile (generate): Likewise. (tests-special): Likewise. (xtests-special): Likewise. (generated): Likewise. ($(objpfx)mtrace-tst-leaks): Likewise. ($(objpfx)mtrace-tst-leaks2): Likewise. localedata: * Makefile (generated): Rename tests to end with .out. (tests-special): Likewise. ($(objpfx)mtrace-tst-leaks): Likewise.
2014-03-07 03:29:23 +00:00
$(objpfx)tst-fnmatch-mem.out: $(objpfx)tst-fnmatch.out
Generate .test-result files for tests with special rules. This patch, an updated version of <https://sourceware.org/ml/libc-alpha/2014-01/msg00194.html> now proposed for inclusion in glibc, extends the generation of PASS and FAIL status in .test-result files for individual tests to cover tests with their own custom makefile rules. This is just adding $(evaluate-test) calls to all such rules, since tests with multiple commands were previously split into separate tests. Note that the tests the makefiles expect to fail (posix/annexc and conformtest) currently get FAIL listed in the .test-result file, rather than XFAIL; a subsequent patch will introduce a better XFAIL mechanism. Tested x86_64. * Makefile ($(objpfx)c++-types-check.out): Use $(evaluate-test). ($(objpfx)check-local-headers.out): Likewise. ($(objpfx)begin-end-check.out): Likewise. * Makerules (check-abi-%.out): Likewise. * catgets/Makefile ($(objpfx)test1.cat): Likewise. ($(objpfx)test2.cat): Likewise. ($(objpfx)de/libc.cat): Likewise. ($(objpfx)test-gencat.out): Likewise. * conform/Makefile ($(objpfx)run-conformtest.out): Likewise. * elf/Makefile ($(objpfx)order-cmp.out): Likewise. ($(objpfx)noload-mem): Likewise. ($(objpfx)tst-pathopt.out): Likewise. ($(objpfx)tst-rtld-load-self.out): Likewise. ($(objpfx)tst-array1-cmp.out): Likewise. ($(objpfx)tst-array1-static-cmp.out): Likewise. ($(objpfx)tst-array2-cmp.out): Likewise. ($(objpfx)tst-array3-cmp.out): Likewise. ($(objpfx)tst-array4-cmp.out): Likewise. ($(objpfx)tst-array5-cmp.out): Likewise. ($(objpfx)tst-array5-static-cmp.out): Likewise. ($(objpfx)check-textrel.out): Likewise. ($(objpfx)check-execstack.out): Likewise. ($(objpfx)check-localplt.out): Likewise. ($(objpfx)order2-cmp.out): Likewise. ($(objpfx)tst-leaks1-mem): Likewise. ($(objpfx)tst-leaks1-static-mem): Likewise. ($(objpfx)tst-initorder-cmp.out): Likewise. ($(objpfx)tst-initorder2-cmp.out): Likewise. ($(objpfx)tst-unused-dep.out): Likewise. ($(objpfx)tst-unused-dep-cmp.out): Likewise. * grp/Makefile ($(objpfx)tst_fgetgrent.out): Likewise. * iconv/Makefile (test-iconvconfig): Likewise. * iconvdata/Makefile ($(objpfx)mtrace-tst-loading): Likewise. ($(objpfx)iconv-test.out): Likewise. ($(objpfx)tst-tables.out): Likewise. * intl/Makefile ($(objpfx)mtrace-tst-gettext): Likewise. ($(objpfx)tst-gettext.out): Likewise. ($(objpfx)tst-translit.out): Likewise. ($(objpfx)tst-gettext2.out): Likewise. ($(objpfx)tst-gettext4.out): Likewise. ($(objpfx)tst-gettext6.out): Likewise. * io/Makefile ($(objpfx)ftwtest.out): Likewise. * libio/Makefile ($(objpfx)test-freopen.out): Likewise. ($(objpfx)tst-fopenloc-cmp.out): Likewise. ($(objpfx)tst-fopenloc-mem.out): Likewise. * malloc/Makefile ($(objpfx)tst-mtrace.out): Likewise. * misc/Makefile ($(objpfx)tst-error1-mem): Likewise. * posix/Makefile ($(objpfx)globtest.out): Likewise. ($(objpfx)wordexp-tst.out): Likewise. ($(objpfx)annexc.out): Likewise. ($(objpfx)tst-fnmatch-mem): Likewise. ($(objpfx)bug-regex2-mem): Likewise. ($(objpfx)bug-regex14-mem): Likewise. ($(objpfx)bug-regex21-mem): Likewise. ($(objpfx)bug-regex31-mem): Likewise. ($(objpfx)tst-vfork3-mem): Likewise. ($(objpfx)tst-rxspencer-no-utf8-mem): Likewise. ($(objpfx)tst-pcre-mem): Likewise. ($(objpfx)tst-boost-mem): Likewise. ($(objpfx)tst-getconf.out): Likewise. ($(objpfx)bug-ga2-mem): Likewise. ($(objpfx)bug-glob2-mem): Likewise. * resolv/Makefile ($(objpfx)mtrace-tst-leaks): Likewise. ($(objpfx)mtrace-tst-leaks2): Likewise. * stdio-common/Makefile ($(objpfx)tst-unbputc.out): Likewise. ($(objpfx)tst-printf.out): Likewise. ($(objpfx)tst-setvbuf1.out): Likewise. ($(objpfx)tst-setvbuf1-cmp.out): Likewise. * stdlib/Makefile ($(objpfx)isomac.out): Likewise. ($(objpfx)tst-fmtmsg.out): Likewise. * string/Makefile ($(objpfx)tst-svc-cmp.out): Likewise. * sysdeps/x86/Makefile ($(objpfx)tst-xmmymm.out): Likewise. localedata: * Makefile ($(objpfx)sort-test.out): Use $(evaluate-test). ($(objpfx)tst-fmon.out): Likewise. ($(objpfx)tst-numeric.out): Likewise. ($(objpfx)tst-locale.out): Likewise. ($(objpfx)tst-rpmatch.out): Likewise. ($(objpfx)tst-trans.out): Likewise. ($(objpfx)tst-mbswcs.out): Likewise. ($(objpfx)tst-ctype.out): Likewise. ($(objpfx)tst-wctype.out): Likewise. ($(objpfx)tst-langinfo.out): Likewise. ($(objpfx)mtrace-tst-leaks): Likewise. nptl: * Makefile ($(objpfx)tst-stack3-mem): Use $(evaluate-test). ($(objpfx)tst-tls6.out): Likewise. ($(objpfx)tst-cleanup0.out): Likewise. ($(objpfx)tst-cleanup0-cmp.out): Likewise. ($(objpfx)tst-cancel-wrappers.out): Likewise. ($(objpfx)tst-oddstacklimit.out): Likewise. nptl_db: * Makefile ($(objpfx)db-symbols.out): Use $(evaluate-test).
2014-02-21 21:48:08 +00:00
$(common-objpfx)malloc/mtrace $(objpfx)tst-fnmatch.mtrace > $@; \
$(evaluate-test)
2010-11-12 08:51:28 +00:00
bug-regex2-ENV = MALLOC_TRACE=$(objpfx)bug-regex2.mtrace
Make tests consistently use *.out output files. This patch systematically renames miscellaneous tests so their outputs use a *.out name (unless the test is just running some glibc program with its conventional output file name, rather than a special program at all, as in catgets tests generating *.cat). In the case of the iconv test test-iconvconfig, output is redirected where it wasn't before. In various places the "generated" variable is updated to reflect the revised test names; in iconvdata/Makefile a typo (mmtrace-tst-loading) is also fixed. resolv/Makefile sets both "generate" (which appears unused) and "generated". Bitrot in the settings of these variables could no doubt be fixed so that "make clean" after build and testing leaves results the same as after configure (and indeed the tests-special / xtests-special variables could be used to simplify things, by removing those files automatically rather than listing them manually in these variables), and "make distclean" leaves an empty build directory, but right now it appears various files don't get deleted. I think they are liable to continue to bitrot in the absence of routine testing that these targets actually work, given that building in the source directory isn't supported and that was the main use of such makefile targets. Tested x86_64. * elf/Makefile (tests-special): Rename tests to end with .out. ($(objpfx)noload-mem): Likewise. ($(objpfx)tst-leaks1-mem): Likewise. ($(objpfx)tst-leaks1-static-mem.out): Likewise. * iconv/Makefile (xtests-special): Change test-iconvconfig to $(objpfx)test-iconvconfig.out. (test-iconvconfig): Change to $(objpfx)test-iconvconfig.out. Use set -e inside subshell and redirect output to file. * iconvdata/Makefile (generated): Rename tests to end with .out. Correct type. (tests-special): Rename tests to end with .out. ($(objpfx)mtrace-tst-loading): Likewise. * intl/Makefile (generated): Likewise. (tests-special): Likewise. ($(objpfx)mtrace-tst-gettext): Likewise. * misc/Makefile (generated): Likewise. (tests-special): Likewise. ($(objpfx)tst-error1-mem): Likewise. * nptl/Makefile (tests-special): Likewise. ($(objpfx)tst-stack3-mem): Likewise. (generated): Likewise. * posix/Makefile (generated): Likewise. (tests-special): Likewise. (xtests-special): Likewise. ($(objpfx)tst-fnmatch-mem): Likewise. ($(objpfx)bug-regex2-mem): Likewise. ($(objpfx)bug-regex14-mem): Likewise. ($(objpfx)bug-regex21-mem): Likewise. ($(objpfx)bug-regex31-mem): Likewise. ($(objpfx)tst-vfork3-mem): Likewise. ($(objpfx)tst-rxspencer-no-utf8-mem): Likewise. ($(objpfx)tst-pcre-mem): Likewise. ($(objpfx)tst-boost-mem): Likewise. ($(objpfx)bug-ga2-mem): Likewise. ($(objpfx)bug-glob2-mem): Likewise. * resolv/Makefile (generate): Likewise. (tests-special): Likewise. (xtests-special): Likewise. (generated): Likewise. ($(objpfx)mtrace-tst-leaks): Likewise. ($(objpfx)mtrace-tst-leaks2): Likewise. localedata: * Makefile (generated): Rename tests to end with .out. (tests-special): Likewise. ($(objpfx)mtrace-tst-leaks): Likewise.
2014-03-07 03:29:23 +00:00
$(objpfx)bug-regex2-mem.out: $(objpfx)bug-regex2.out
Generate .test-result files for tests with special rules. This patch, an updated version of <https://sourceware.org/ml/libc-alpha/2014-01/msg00194.html> now proposed for inclusion in glibc, extends the generation of PASS and FAIL status in .test-result files for individual tests to cover tests with their own custom makefile rules. This is just adding $(evaluate-test) calls to all such rules, since tests with multiple commands were previously split into separate tests. Note that the tests the makefiles expect to fail (posix/annexc and conformtest) currently get FAIL listed in the .test-result file, rather than XFAIL; a subsequent patch will introduce a better XFAIL mechanism. Tested x86_64. * Makefile ($(objpfx)c++-types-check.out): Use $(evaluate-test). ($(objpfx)check-local-headers.out): Likewise. ($(objpfx)begin-end-check.out): Likewise. * Makerules (check-abi-%.out): Likewise. * catgets/Makefile ($(objpfx)test1.cat): Likewise. ($(objpfx)test2.cat): Likewise. ($(objpfx)de/libc.cat): Likewise. ($(objpfx)test-gencat.out): Likewise. * conform/Makefile ($(objpfx)run-conformtest.out): Likewise. * elf/Makefile ($(objpfx)order-cmp.out): Likewise. ($(objpfx)noload-mem): Likewise. ($(objpfx)tst-pathopt.out): Likewise. ($(objpfx)tst-rtld-load-self.out): Likewise. ($(objpfx)tst-array1-cmp.out): Likewise. ($(objpfx)tst-array1-static-cmp.out): Likewise. ($(objpfx)tst-array2-cmp.out): Likewise. ($(objpfx)tst-array3-cmp.out): Likewise. ($(objpfx)tst-array4-cmp.out): Likewise. ($(objpfx)tst-array5-cmp.out): Likewise. ($(objpfx)tst-array5-static-cmp.out): Likewise. ($(objpfx)check-textrel.out): Likewise. ($(objpfx)check-execstack.out): Likewise. ($(objpfx)check-localplt.out): Likewise. ($(objpfx)order2-cmp.out): Likewise. ($(objpfx)tst-leaks1-mem): Likewise. ($(objpfx)tst-leaks1-static-mem): Likewise. ($(objpfx)tst-initorder-cmp.out): Likewise. ($(objpfx)tst-initorder2-cmp.out): Likewise. ($(objpfx)tst-unused-dep.out): Likewise. ($(objpfx)tst-unused-dep-cmp.out): Likewise. * grp/Makefile ($(objpfx)tst_fgetgrent.out): Likewise. * iconv/Makefile (test-iconvconfig): Likewise. * iconvdata/Makefile ($(objpfx)mtrace-tst-loading): Likewise. ($(objpfx)iconv-test.out): Likewise. ($(objpfx)tst-tables.out): Likewise. * intl/Makefile ($(objpfx)mtrace-tst-gettext): Likewise. ($(objpfx)tst-gettext.out): Likewise. ($(objpfx)tst-translit.out): Likewise. ($(objpfx)tst-gettext2.out): Likewise. ($(objpfx)tst-gettext4.out): Likewise. ($(objpfx)tst-gettext6.out): Likewise. * io/Makefile ($(objpfx)ftwtest.out): Likewise. * libio/Makefile ($(objpfx)test-freopen.out): Likewise. ($(objpfx)tst-fopenloc-cmp.out): Likewise. ($(objpfx)tst-fopenloc-mem.out): Likewise. * malloc/Makefile ($(objpfx)tst-mtrace.out): Likewise. * misc/Makefile ($(objpfx)tst-error1-mem): Likewise. * posix/Makefile ($(objpfx)globtest.out): Likewise. ($(objpfx)wordexp-tst.out): Likewise. ($(objpfx)annexc.out): Likewise. ($(objpfx)tst-fnmatch-mem): Likewise. ($(objpfx)bug-regex2-mem): Likewise. ($(objpfx)bug-regex14-mem): Likewise. ($(objpfx)bug-regex21-mem): Likewise. ($(objpfx)bug-regex31-mem): Likewise. ($(objpfx)tst-vfork3-mem): Likewise. ($(objpfx)tst-rxspencer-no-utf8-mem): Likewise. ($(objpfx)tst-pcre-mem): Likewise. ($(objpfx)tst-boost-mem): Likewise. ($(objpfx)tst-getconf.out): Likewise. ($(objpfx)bug-ga2-mem): Likewise. ($(objpfx)bug-glob2-mem): Likewise. * resolv/Makefile ($(objpfx)mtrace-tst-leaks): Likewise. ($(objpfx)mtrace-tst-leaks2): Likewise. * stdio-common/Makefile ($(objpfx)tst-unbputc.out): Likewise. ($(objpfx)tst-printf.out): Likewise. ($(objpfx)tst-setvbuf1.out): Likewise. ($(objpfx)tst-setvbuf1-cmp.out): Likewise. * stdlib/Makefile ($(objpfx)isomac.out): Likewise. ($(objpfx)tst-fmtmsg.out): Likewise. * string/Makefile ($(objpfx)tst-svc-cmp.out): Likewise. * sysdeps/x86/Makefile ($(objpfx)tst-xmmymm.out): Likewise. localedata: * Makefile ($(objpfx)sort-test.out): Use $(evaluate-test). ($(objpfx)tst-fmon.out): Likewise. ($(objpfx)tst-numeric.out): Likewise. ($(objpfx)tst-locale.out): Likewise. ($(objpfx)tst-rpmatch.out): Likewise. ($(objpfx)tst-trans.out): Likewise. ($(objpfx)tst-mbswcs.out): Likewise. ($(objpfx)tst-ctype.out): Likewise. ($(objpfx)tst-wctype.out): Likewise. ($(objpfx)tst-langinfo.out): Likewise. ($(objpfx)mtrace-tst-leaks): Likewise. nptl: * Makefile ($(objpfx)tst-stack3-mem): Use $(evaluate-test). ($(objpfx)tst-tls6.out): Likewise. ($(objpfx)tst-cleanup0.out): Likewise. ($(objpfx)tst-cleanup0-cmp.out): Likewise. ($(objpfx)tst-cancel-wrappers.out): Likewise. ($(objpfx)tst-oddstacklimit.out): Likewise. nptl_db: * Makefile ($(objpfx)db-symbols.out): Use $(evaluate-test).
2014-02-21 21:48:08 +00:00
$(common-objpfx)malloc/mtrace $(objpfx)bug-regex2.mtrace > $@; \
$(evaluate-test)
bug-regex14-ENV = MALLOC_TRACE=$(objpfx)bug-regex14.mtrace
Make tests consistently use *.out output files. This patch systematically renames miscellaneous tests so their outputs use a *.out name (unless the test is just running some glibc program with its conventional output file name, rather than a special program at all, as in catgets tests generating *.cat). In the case of the iconv test test-iconvconfig, output is redirected where it wasn't before. In various places the "generated" variable is updated to reflect the revised test names; in iconvdata/Makefile a typo (mmtrace-tst-loading) is also fixed. resolv/Makefile sets both "generate" (which appears unused) and "generated". Bitrot in the settings of these variables could no doubt be fixed so that "make clean" after build and testing leaves results the same as after configure (and indeed the tests-special / xtests-special variables could be used to simplify things, by removing those files automatically rather than listing them manually in these variables), and "make distclean" leaves an empty build directory, but right now it appears various files don't get deleted. I think they are liable to continue to bitrot in the absence of routine testing that these targets actually work, given that building in the source directory isn't supported and that was the main use of such makefile targets. Tested x86_64. * elf/Makefile (tests-special): Rename tests to end with .out. ($(objpfx)noload-mem): Likewise. ($(objpfx)tst-leaks1-mem): Likewise. ($(objpfx)tst-leaks1-static-mem.out): Likewise. * iconv/Makefile (xtests-special): Change test-iconvconfig to $(objpfx)test-iconvconfig.out. (test-iconvconfig): Change to $(objpfx)test-iconvconfig.out. Use set -e inside subshell and redirect output to file. * iconvdata/Makefile (generated): Rename tests to end with .out. Correct type. (tests-special): Rename tests to end with .out. ($(objpfx)mtrace-tst-loading): Likewise. * intl/Makefile (generated): Likewise. (tests-special): Likewise. ($(objpfx)mtrace-tst-gettext): Likewise. * misc/Makefile (generated): Likewise. (tests-special): Likewise. ($(objpfx)tst-error1-mem): Likewise. * nptl/Makefile (tests-special): Likewise. ($(objpfx)tst-stack3-mem): Likewise. (generated): Likewise. * posix/Makefile (generated): Likewise. (tests-special): Likewise. (xtests-special): Likewise. ($(objpfx)tst-fnmatch-mem): Likewise. ($(objpfx)bug-regex2-mem): Likewise. ($(objpfx)bug-regex14-mem): Likewise. ($(objpfx)bug-regex21-mem): Likewise. ($(objpfx)bug-regex31-mem): Likewise. ($(objpfx)tst-vfork3-mem): Likewise. ($(objpfx)tst-rxspencer-no-utf8-mem): Likewise. ($(objpfx)tst-pcre-mem): Likewise. ($(objpfx)tst-boost-mem): Likewise. ($(objpfx)bug-ga2-mem): Likewise. ($(objpfx)bug-glob2-mem): Likewise. * resolv/Makefile (generate): Likewise. (tests-special): Likewise. (xtests-special): Likewise. (generated): Likewise. ($(objpfx)mtrace-tst-leaks): Likewise. ($(objpfx)mtrace-tst-leaks2): Likewise. localedata: * Makefile (generated): Rename tests to end with .out. (tests-special): Likewise. ($(objpfx)mtrace-tst-leaks): Likewise.
2014-03-07 03:29:23 +00:00
$(objpfx)bug-regex14-mem.out: $(objpfx)bug-regex14.out
Generate .test-result files for tests with special rules. This patch, an updated version of <https://sourceware.org/ml/libc-alpha/2014-01/msg00194.html> now proposed for inclusion in glibc, extends the generation of PASS and FAIL status in .test-result files for individual tests to cover tests with their own custom makefile rules. This is just adding $(evaluate-test) calls to all such rules, since tests with multiple commands were previously split into separate tests. Note that the tests the makefiles expect to fail (posix/annexc and conformtest) currently get FAIL listed in the .test-result file, rather than XFAIL; a subsequent patch will introduce a better XFAIL mechanism. Tested x86_64. * Makefile ($(objpfx)c++-types-check.out): Use $(evaluate-test). ($(objpfx)check-local-headers.out): Likewise. ($(objpfx)begin-end-check.out): Likewise. * Makerules (check-abi-%.out): Likewise. * catgets/Makefile ($(objpfx)test1.cat): Likewise. ($(objpfx)test2.cat): Likewise. ($(objpfx)de/libc.cat): Likewise. ($(objpfx)test-gencat.out): Likewise. * conform/Makefile ($(objpfx)run-conformtest.out): Likewise. * elf/Makefile ($(objpfx)order-cmp.out): Likewise. ($(objpfx)noload-mem): Likewise. ($(objpfx)tst-pathopt.out): Likewise. ($(objpfx)tst-rtld-load-self.out): Likewise. ($(objpfx)tst-array1-cmp.out): Likewise. ($(objpfx)tst-array1-static-cmp.out): Likewise. ($(objpfx)tst-array2-cmp.out): Likewise. ($(objpfx)tst-array3-cmp.out): Likewise. ($(objpfx)tst-array4-cmp.out): Likewise. ($(objpfx)tst-array5-cmp.out): Likewise. ($(objpfx)tst-array5-static-cmp.out): Likewise. ($(objpfx)check-textrel.out): Likewise. ($(objpfx)check-execstack.out): Likewise. ($(objpfx)check-localplt.out): Likewise. ($(objpfx)order2-cmp.out): Likewise. ($(objpfx)tst-leaks1-mem): Likewise. ($(objpfx)tst-leaks1-static-mem): Likewise. ($(objpfx)tst-initorder-cmp.out): Likewise. ($(objpfx)tst-initorder2-cmp.out): Likewise. ($(objpfx)tst-unused-dep.out): Likewise. ($(objpfx)tst-unused-dep-cmp.out): Likewise. * grp/Makefile ($(objpfx)tst_fgetgrent.out): Likewise. * iconv/Makefile (test-iconvconfig): Likewise. * iconvdata/Makefile ($(objpfx)mtrace-tst-loading): Likewise. ($(objpfx)iconv-test.out): Likewise. ($(objpfx)tst-tables.out): Likewise. * intl/Makefile ($(objpfx)mtrace-tst-gettext): Likewise. ($(objpfx)tst-gettext.out): Likewise. ($(objpfx)tst-translit.out): Likewise. ($(objpfx)tst-gettext2.out): Likewise. ($(objpfx)tst-gettext4.out): Likewise. ($(objpfx)tst-gettext6.out): Likewise. * io/Makefile ($(objpfx)ftwtest.out): Likewise. * libio/Makefile ($(objpfx)test-freopen.out): Likewise. ($(objpfx)tst-fopenloc-cmp.out): Likewise. ($(objpfx)tst-fopenloc-mem.out): Likewise. * malloc/Makefile ($(objpfx)tst-mtrace.out): Likewise. * misc/Makefile ($(objpfx)tst-error1-mem): Likewise. * posix/Makefile ($(objpfx)globtest.out): Likewise. ($(objpfx)wordexp-tst.out): Likewise. ($(objpfx)annexc.out): Likewise. ($(objpfx)tst-fnmatch-mem): Likewise. ($(objpfx)bug-regex2-mem): Likewise. ($(objpfx)bug-regex14-mem): Likewise. ($(objpfx)bug-regex21-mem): Likewise. ($(objpfx)bug-regex31-mem): Likewise. ($(objpfx)tst-vfork3-mem): Likewise. ($(objpfx)tst-rxspencer-no-utf8-mem): Likewise. ($(objpfx)tst-pcre-mem): Likewise. ($(objpfx)tst-boost-mem): Likewise. ($(objpfx)tst-getconf.out): Likewise. ($(objpfx)bug-ga2-mem): Likewise. ($(objpfx)bug-glob2-mem): Likewise. * resolv/Makefile ($(objpfx)mtrace-tst-leaks): Likewise. ($(objpfx)mtrace-tst-leaks2): Likewise. * stdio-common/Makefile ($(objpfx)tst-unbputc.out): Likewise. ($(objpfx)tst-printf.out): Likewise. ($(objpfx)tst-setvbuf1.out): Likewise. ($(objpfx)tst-setvbuf1-cmp.out): Likewise. * stdlib/Makefile ($(objpfx)isomac.out): Likewise. ($(objpfx)tst-fmtmsg.out): Likewise. * string/Makefile ($(objpfx)tst-svc-cmp.out): Likewise. * sysdeps/x86/Makefile ($(objpfx)tst-xmmymm.out): Likewise. localedata: * Makefile ($(objpfx)sort-test.out): Use $(evaluate-test). ($(objpfx)tst-fmon.out): Likewise. ($(objpfx)tst-numeric.out): Likewise. ($(objpfx)tst-locale.out): Likewise. ($(objpfx)tst-rpmatch.out): Likewise. ($(objpfx)tst-trans.out): Likewise. ($(objpfx)tst-mbswcs.out): Likewise. ($(objpfx)tst-ctype.out): Likewise. ($(objpfx)tst-wctype.out): Likewise. ($(objpfx)tst-langinfo.out): Likewise. ($(objpfx)mtrace-tst-leaks): Likewise. nptl: * Makefile ($(objpfx)tst-stack3-mem): Use $(evaluate-test). ($(objpfx)tst-tls6.out): Likewise. ($(objpfx)tst-cleanup0.out): Likewise. ($(objpfx)tst-cleanup0-cmp.out): Likewise. ($(objpfx)tst-cancel-wrappers.out): Likewise. ($(objpfx)tst-oddstacklimit.out): Likewise. nptl_db: * Makefile ($(objpfx)db-symbols.out): Use $(evaluate-test).
2014-02-21 21:48:08 +00:00
$(common-objpfx)malloc/mtrace $(objpfx)bug-regex14.mtrace > $@; \
$(evaluate-test)
Update. 2003-11-19 Jakub Jelinek <jakub@redhat.com> * posix/regexec.c (extend_buffers): Don't allocate twice as big state_log as needed. Don't modify pstr->valid_len for mb_cur_max == 1 !icase !trans. * posix/regcomp.c (free_bin_tree): Removed. (create_tree): Add dfa argument. Don't call re_malloc for each tree, instead allocate from str_tree_storage. (re_dfa_add_tree_node): New function. (free_dfa_content): Handle freeing if dfa->nodes == NULL or dfa->state_table == NULL. (re_compile_internal): Call free_dfa_content if init_dfa fails. Call free_workarea_compile, re_string_destruct and free_dfa_content for most of the other failure paths. (init_dfa): Initialize str_tree_storage_idx. Don't clear any fields on allocation failure. (free_workarea_compile): Free str_tree_storage chunks instead of free_bin_tree (dfa->str_tree). (parse): Call re_dfa_add_tree_node instead of re_dfa_add_node followed by create_tree. Add dfa argument to remaining create_tree calls. Remove new_idx variable. Remove calls to free_bin_tree. (parse_reg_exp, parse_branch, parse_expression, parse_sub_exp, parse_dup_op, parse_bracket_exp, build_charclass_op): Likewise. (duplicate_tree): Remove calls to free_bin_tree, add dfa argument to create_tree. * posix/regex_internal.h (BIN_TREE_STORAGE_SIZE): Define. (bin_tree_storage_t): New type. (re_dfa_t): Add str_tree_storage and str_tree_storage_idx fields. * posix/Makefile (tests): Add bug-regex21. (generated): Add bug-regex21-mem, bug-regex21.mtrace, tst-rxspencer-mem and tst-rxspencer.mtrace. (tests): Depend on $(objpfx)bug-regex21-mem and $(objpfx)tst-rxspencer-mem. (bug-regex21-ENV, tst-rxspencer-ENV): Set. ($(objpfx)bug-regex21-mem, $(objpfx)tst-rxspencer-mem): New. * posix/tst-rxspencer.c (main): Add call to mtrace. Free line at the end. * posix/bug-regex21.c: New test. * posix/regexec.c (get_subexp): After calling get_subexp_sub
2003-11-19 19:37:31 +00:00
bug-regex21-ENV = MALLOC_TRACE=$(objpfx)bug-regex21.mtrace
Make tests consistently use *.out output files. This patch systematically renames miscellaneous tests so their outputs use a *.out name (unless the test is just running some glibc program with its conventional output file name, rather than a special program at all, as in catgets tests generating *.cat). In the case of the iconv test test-iconvconfig, output is redirected where it wasn't before. In various places the "generated" variable is updated to reflect the revised test names; in iconvdata/Makefile a typo (mmtrace-tst-loading) is also fixed. resolv/Makefile sets both "generate" (which appears unused) and "generated". Bitrot in the settings of these variables could no doubt be fixed so that "make clean" after build and testing leaves results the same as after configure (and indeed the tests-special / xtests-special variables could be used to simplify things, by removing those files automatically rather than listing them manually in these variables), and "make distclean" leaves an empty build directory, but right now it appears various files don't get deleted. I think they are liable to continue to bitrot in the absence of routine testing that these targets actually work, given that building in the source directory isn't supported and that was the main use of such makefile targets. Tested x86_64. * elf/Makefile (tests-special): Rename tests to end with .out. ($(objpfx)noload-mem): Likewise. ($(objpfx)tst-leaks1-mem): Likewise. ($(objpfx)tst-leaks1-static-mem.out): Likewise. * iconv/Makefile (xtests-special): Change test-iconvconfig to $(objpfx)test-iconvconfig.out. (test-iconvconfig): Change to $(objpfx)test-iconvconfig.out. Use set -e inside subshell and redirect output to file. * iconvdata/Makefile (generated): Rename tests to end with .out. Correct type. (tests-special): Rename tests to end with .out. ($(objpfx)mtrace-tst-loading): Likewise. * intl/Makefile (generated): Likewise. (tests-special): Likewise. ($(objpfx)mtrace-tst-gettext): Likewise. * misc/Makefile (generated): Likewise. (tests-special): Likewise. ($(objpfx)tst-error1-mem): Likewise. * nptl/Makefile (tests-special): Likewise. ($(objpfx)tst-stack3-mem): Likewise. (generated): Likewise. * posix/Makefile (generated): Likewise. (tests-special): Likewise. (xtests-special): Likewise. ($(objpfx)tst-fnmatch-mem): Likewise. ($(objpfx)bug-regex2-mem): Likewise. ($(objpfx)bug-regex14-mem): Likewise. ($(objpfx)bug-regex21-mem): Likewise. ($(objpfx)bug-regex31-mem): Likewise. ($(objpfx)tst-vfork3-mem): Likewise. ($(objpfx)tst-rxspencer-no-utf8-mem): Likewise. ($(objpfx)tst-pcre-mem): Likewise. ($(objpfx)tst-boost-mem): Likewise. ($(objpfx)bug-ga2-mem): Likewise. ($(objpfx)bug-glob2-mem): Likewise. * resolv/Makefile (generate): Likewise. (tests-special): Likewise. (xtests-special): Likewise. (generated): Likewise. ($(objpfx)mtrace-tst-leaks): Likewise. ($(objpfx)mtrace-tst-leaks2): Likewise. localedata: * Makefile (generated): Rename tests to end with .out. (tests-special): Likewise. ($(objpfx)mtrace-tst-leaks): Likewise.
2014-03-07 03:29:23 +00:00
$(objpfx)bug-regex21-mem.out: $(objpfx)bug-regex21.out
Generate .test-result files for tests with special rules. This patch, an updated version of <https://sourceware.org/ml/libc-alpha/2014-01/msg00194.html> now proposed for inclusion in glibc, extends the generation of PASS and FAIL status in .test-result files for individual tests to cover tests with their own custom makefile rules. This is just adding $(evaluate-test) calls to all such rules, since tests with multiple commands were previously split into separate tests. Note that the tests the makefiles expect to fail (posix/annexc and conformtest) currently get FAIL listed in the .test-result file, rather than XFAIL; a subsequent patch will introduce a better XFAIL mechanism. Tested x86_64. * Makefile ($(objpfx)c++-types-check.out): Use $(evaluate-test). ($(objpfx)check-local-headers.out): Likewise. ($(objpfx)begin-end-check.out): Likewise. * Makerules (check-abi-%.out): Likewise. * catgets/Makefile ($(objpfx)test1.cat): Likewise. ($(objpfx)test2.cat): Likewise. ($(objpfx)de/libc.cat): Likewise. ($(objpfx)test-gencat.out): Likewise. * conform/Makefile ($(objpfx)run-conformtest.out): Likewise. * elf/Makefile ($(objpfx)order-cmp.out): Likewise. ($(objpfx)noload-mem): Likewise. ($(objpfx)tst-pathopt.out): Likewise. ($(objpfx)tst-rtld-load-self.out): Likewise. ($(objpfx)tst-array1-cmp.out): Likewise. ($(objpfx)tst-array1-static-cmp.out): Likewise. ($(objpfx)tst-array2-cmp.out): Likewise. ($(objpfx)tst-array3-cmp.out): Likewise. ($(objpfx)tst-array4-cmp.out): Likewise. ($(objpfx)tst-array5-cmp.out): Likewise. ($(objpfx)tst-array5-static-cmp.out): Likewise. ($(objpfx)check-textrel.out): Likewise. ($(objpfx)check-execstack.out): Likewise. ($(objpfx)check-localplt.out): Likewise. ($(objpfx)order2-cmp.out): Likewise. ($(objpfx)tst-leaks1-mem): Likewise. ($(objpfx)tst-leaks1-static-mem): Likewise. ($(objpfx)tst-initorder-cmp.out): Likewise. ($(objpfx)tst-initorder2-cmp.out): Likewise. ($(objpfx)tst-unused-dep.out): Likewise. ($(objpfx)tst-unused-dep-cmp.out): Likewise. * grp/Makefile ($(objpfx)tst_fgetgrent.out): Likewise. * iconv/Makefile (test-iconvconfig): Likewise. * iconvdata/Makefile ($(objpfx)mtrace-tst-loading): Likewise. ($(objpfx)iconv-test.out): Likewise. ($(objpfx)tst-tables.out): Likewise. * intl/Makefile ($(objpfx)mtrace-tst-gettext): Likewise. ($(objpfx)tst-gettext.out): Likewise. ($(objpfx)tst-translit.out): Likewise. ($(objpfx)tst-gettext2.out): Likewise. ($(objpfx)tst-gettext4.out): Likewise. ($(objpfx)tst-gettext6.out): Likewise. * io/Makefile ($(objpfx)ftwtest.out): Likewise. * libio/Makefile ($(objpfx)test-freopen.out): Likewise. ($(objpfx)tst-fopenloc-cmp.out): Likewise. ($(objpfx)tst-fopenloc-mem.out): Likewise. * malloc/Makefile ($(objpfx)tst-mtrace.out): Likewise. * misc/Makefile ($(objpfx)tst-error1-mem): Likewise. * posix/Makefile ($(objpfx)globtest.out): Likewise. ($(objpfx)wordexp-tst.out): Likewise. ($(objpfx)annexc.out): Likewise. ($(objpfx)tst-fnmatch-mem): Likewise. ($(objpfx)bug-regex2-mem): Likewise. ($(objpfx)bug-regex14-mem): Likewise. ($(objpfx)bug-regex21-mem): Likewise. ($(objpfx)bug-regex31-mem): Likewise. ($(objpfx)tst-vfork3-mem): Likewise. ($(objpfx)tst-rxspencer-no-utf8-mem): Likewise. ($(objpfx)tst-pcre-mem): Likewise. ($(objpfx)tst-boost-mem): Likewise. ($(objpfx)tst-getconf.out): Likewise. ($(objpfx)bug-ga2-mem): Likewise. ($(objpfx)bug-glob2-mem): Likewise. * resolv/Makefile ($(objpfx)mtrace-tst-leaks): Likewise. ($(objpfx)mtrace-tst-leaks2): Likewise. * stdio-common/Makefile ($(objpfx)tst-unbputc.out): Likewise. ($(objpfx)tst-printf.out): Likewise. ($(objpfx)tst-setvbuf1.out): Likewise. ($(objpfx)tst-setvbuf1-cmp.out): Likewise. * stdlib/Makefile ($(objpfx)isomac.out): Likewise. ($(objpfx)tst-fmtmsg.out): Likewise. * string/Makefile ($(objpfx)tst-svc-cmp.out): Likewise. * sysdeps/x86/Makefile ($(objpfx)tst-xmmymm.out): Likewise. localedata: * Makefile ($(objpfx)sort-test.out): Use $(evaluate-test). ($(objpfx)tst-fmon.out): Likewise. ($(objpfx)tst-numeric.out): Likewise. ($(objpfx)tst-locale.out): Likewise. ($(objpfx)tst-rpmatch.out): Likewise. ($(objpfx)tst-trans.out): Likewise. ($(objpfx)tst-mbswcs.out): Likewise. ($(objpfx)tst-ctype.out): Likewise. ($(objpfx)tst-wctype.out): Likewise. ($(objpfx)tst-langinfo.out): Likewise. ($(objpfx)mtrace-tst-leaks): Likewise. nptl: * Makefile ($(objpfx)tst-stack3-mem): Use $(evaluate-test). ($(objpfx)tst-tls6.out): Likewise. ($(objpfx)tst-cleanup0.out): Likewise. ($(objpfx)tst-cleanup0-cmp.out): Likewise. ($(objpfx)tst-cancel-wrappers.out): Likewise. ($(objpfx)tst-oddstacklimit.out): Likewise. nptl_db: * Makefile ($(objpfx)db-symbols.out): Use $(evaluate-test).
2014-02-21 21:48:08 +00:00
$(common-objpfx)malloc/mtrace $(objpfx)bug-regex21.mtrace > $@; \
$(evaluate-test)
Update. 2003-11-19 Jakub Jelinek <jakub@redhat.com> * posix/regexec.c (extend_buffers): Don't allocate twice as big state_log as needed. Don't modify pstr->valid_len for mb_cur_max == 1 !icase !trans. * posix/regcomp.c (free_bin_tree): Removed. (create_tree): Add dfa argument. Don't call re_malloc for each tree, instead allocate from str_tree_storage. (re_dfa_add_tree_node): New function. (free_dfa_content): Handle freeing if dfa->nodes == NULL or dfa->state_table == NULL. (re_compile_internal): Call free_dfa_content if init_dfa fails. Call free_workarea_compile, re_string_destruct and free_dfa_content for most of the other failure paths. (init_dfa): Initialize str_tree_storage_idx. Don't clear any fields on allocation failure. (free_workarea_compile): Free str_tree_storage chunks instead of free_bin_tree (dfa->str_tree). (parse): Call re_dfa_add_tree_node instead of re_dfa_add_node followed by create_tree. Add dfa argument to remaining create_tree calls. Remove new_idx variable. Remove calls to free_bin_tree. (parse_reg_exp, parse_branch, parse_expression, parse_sub_exp, parse_dup_op, parse_bracket_exp, build_charclass_op): Likewise. (duplicate_tree): Remove calls to free_bin_tree, add dfa argument to create_tree. * posix/regex_internal.h (BIN_TREE_STORAGE_SIZE): Define. (bin_tree_storage_t): New type. (re_dfa_t): Add str_tree_storage and str_tree_storage_idx fields. * posix/Makefile (tests): Add bug-regex21. (generated): Add bug-regex21-mem, bug-regex21.mtrace, tst-rxspencer-mem and tst-rxspencer.mtrace. (tests): Depend on $(objpfx)bug-regex21-mem and $(objpfx)tst-rxspencer-mem. (bug-regex21-ENV, tst-rxspencer-ENV): Set. ($(objpfx)bug-regex21-mem, $(objpfx)tst-rxspencer-mem): New. * posix/tst-rxspencer.c (main): Add call to mtrace. Free line at the end. * posix/bug-regex21.c: New test. * posix/regexec.c (get_subexp): After calling get_subexp_sub
2003-11-19 19:37:31 +00:00
2010-10-11 16:34:53 +00:00
bug-regex31-ENV = MALLOC_TRACE=$(objpfx)bug-regex31.mtrace
Make tests consistently use *.out output files. This patch systematically renames miscellaneous tests so their outputs use a *.out name (unless the test is just running some glibc program with its conventional output file name, rather than a special program at all, as in catgets tests generating *.cat). In the case of the iconv test test-iconvconfig, output is redirected where it wasn't before. In various places the "generated" variable is updated to reflect the revised test names; in iconvdata/Makefile a typo (mmtrace-tst-loading) is also fixed. resolv/Makefile sets both "generate" (which appears unused) and "generated". Bitrot in the settings of these variables could no doubt be fixed so that "make clean" after build and testing leaves results the same as after configure (and indeed the tests-special / xtests-special variables could be used to simplify things, by removing those files automatically rather than listing them manually in these variables), and "make distclean" leaves an empty build directory, but right now it appears various files don't get deleted. I think they are liable to continue to bitrot in the absence of routine testing that these targets actually work, given that building in the source directory isn't supported and that was the main use of such makefile targets. Tested x86_64. * elf/Makefile (tests-special): Rename tests to end with .out. ($(objpfx)noload-mem): Likewise. ($(objpfx)tst-leaks1-mem): Likewise. ($(objpfx)tst-leaks1-static-mem.out): Likewise. * iconv/Makefile (xtests-special): Change test-iconvconfig to $(objpfx)test-iconvconfig.out. (test-iconvconfig): Change to $(objpfx)test-iconvconfig.out. Use set -e inside subshell and redirect output to file. * iconvdata/Makefile (generated): Rename tests to end with .out. Correct type. (tests-special): Rename tests to end with .out. ($(objpfx)mtrace-tst-loading): Likewise. * intl/Makefile (generated): Likewise. (tests-special): Likewise. ($(objpfx)mtrace-tst-gettext): Likewise. * misc/Makefile (generated): Likewise. (tests-special): Likewise. ($(objpfx)tst-error1-mem): Likewise. * nptl/Makefile (tests-special): Likewise. ($(objpfx)tst-stack3-mem): Likewise. (generated): Likewise. * posix/Makefile (generated): Likewise. (tests-special): Likewise. (xtests-special): Likewise. ($(objpfx)tst-fnmatch-mem): Likewise. ($(objpfx)bug-regex2-mem): Likewise. ($(objpfx)bug-regex14-mem): Likewise. ($(objpfx)bug-regex21-mem): Likewise. ($(objpfx)bug-regex31-mem): Likewise. ($(objpfx)tst-vfork3-mem): Likewise. ($(objpfx)tst-rxspencer-no-utf8-mem): Likewise. ($(objpfx)tst-pcre-mem): Likewise. ($(objpfx)tst-boost-mem): Likewise. ($(objpfx)bug-ga2-mem): Likewise. ($(objpfx)bug-glob2-mem): Likewise. * resolv/Makefile (generate): Likewise. (tests-special): Likewise. (xtests-special): Likewise. (generated): Likewise. ($(objpfx)mtrace-tst-leaks): Likewise. ($(objpfx)mtrace-tst-leaks2): Likewise. localedata: * Makefile (generated): Rename tests to end with .out. (tests-special): Likewise. ($(objpfx)mtrace-tst-leaks): Likewise.
2014-03-07 03:29:23 +00:00
$(objpfx)bug-regex31-mem.out: $(objpfx)bug-regex31.out
Generate .test-result files for tests with special rules. This patch, an updated version of <https://sourceware.org/ml/libc-alpha/2014-01/msg00194.html> now proposed for inclusion in glibc, extends the generation of PASS and FAIL status in .test-result files for individual tests to cover tests with their own custom makefile rules. This is just adding $(evaluate-test) calls to all such rules, since tests with multiple commands were previously split into separate tests. Note that the tests the makefiles expect to fail (posix/annexc and conformtest) currently get FAIL listed in the .test-result file, rather than XFAIL; a subsequent patch will introduce a better XFAIL mechanism. Tested x86_64. * Makefile ($(objpfx)c++-types-check.out): Use $(evaluate-test). ($(objpfx)check-local-headers.out): Likewise. ($(objpfx)begin-end-check.out): Likewise. * Makerules (check-abi-%.out): Likewise. * catgets/Makefile ($(objpfx)test1.cat): Likewise. ($(objpfx)test2.cat): Likewise. ($(objpfx)de/libc.cat): Likewise. ($(objpfx)test-gencat.out): Likewise. * conform/Makefile ($(objpfx)run-conformtest.out): Likewise. * elf/Makefile ($(objpfx)order-cmp.out): Likewise. ($(objpfx)noload-mem): Likewise. ($(objpfx)tst-pathopt.out): Likewise. ($(objpfx)tst-rtld-load-self.out): Likewise. ($(objpfx)tst-array1-cmp.out): Likewise. ($(objpfx)tst-array1-static-cmp.out): Likewise. ($(objpfx)tst-array2-cmp.out): Likewise. ($(objpfx)tst-array3-cmp.out): Likewise. ($(objpfx)tst-array4-cmp.out): Likewise. ($(objpfx)tst-array5-cmp.out): Likewise. ($(objpfx)tst-array5-static-cmp.out): Likewise. ($(objpfx)check-textrel.out): Likewise. ($(objpfx)check-execstack.out): Likewise. ($(objpfx)check-localplt.out): Likewise. ($(objpfx)order2-cmp.out): Likewise. ($(objpfx)tst-leaks1-mem): Likewise. ($(objpfx)tst-leaks1-static-mem): Likewise. ($(objpfx)tst-initorder-cmp.out): Likewise. ($(objpfx)tst-initorder2-cmp.out): Likewise. ($(objpfx)tst-unused-dep.out): Likewise. ($(objpfx)tst-unused-dep-cmp.out): Likewise. * grp/Makefile ($(objpfx)tst_fgetgrent.out): Likewise. * iconv/Makefile (test-iconvconfig): Likewise. * iconvdata/Makefile ($(objpfx)mtrace-tst-loading): Likewise. ($(objpfx)iconv-test.out): Likewise. ($(objpfx)tst-tables.out): Likewise. * intl/Makefile ($(objpfx)mtrace-tst-gettext): Likewise. ($(objpfx)tst-gettext.out): Likewise. ($(objpfx)tst-translit.out): Likewise. ($(objpfx)tst-gettext2.out): Likewise. ($(objpfx)tst-gettext4.out): Likewise. ($(objpfx)tst-gettext6.out): Likewise. * io/Makefile ($(objpfx)ftwtest.out): Likewise. * libio/Makefile ($(objpfx)test-freopen.out): Likewise. ($(objpfx)tst-fopenloc-cmp.out): Likewise. ($(objpfx)tst-fopenloc-mem.out): Likewise. * malloc/Makefile ($(objpfx)tst-mtrace.out): Likewise. * misc/Makefile ($(objpfx)tst-error1-mem): Likewise. * posix/Makefile ($(objpfx)globtest.out): Likewise. ($(objpfx)wordexp-tst.out): Likewise. ($(objpfx)annexc.out): Likewise. ($(objpfx)tst-fnmatch-mem): Likewise. ($(objpfx)bug-regex2-mem): Likewise. ($(objpfx)bug-regex14-mem): Likewise. ($(objpfx)bug-regex21-mem): Likewise. ($(objpfx)bug-regex31-mem): Likewise. ($(objpfx)tst-vfork3-mem): Likewise. ($(objpfx)tst-rxspencer-no-utf8-mem): Likewise. ($(objpfx)tst-pcre-mem): Likewise. ($(objpfx)tst-boost-mem): Likewise. ($(objpfx)tst-getconf.out): Likewise. ($(objpfx)bug-ga2-mem): Likewise. ($(objpfx)bug-glob2-mem): Likewise. * resolv/Makefile ($(objpfx)mtrace-tst-leaks): Likewise. ($(objpfx)mtrace-tst-leaks2): Likewise. * stdio-common/Makefile ($(objpfx)tst-unbputc.out): Likewise. ($(objpfx)tst-printf.out): Likewise. ($(objpfx)tst-setvbuf1.out): Likewise. ($(objpfx)tst-setvbuf1-cmp.out): Likewise. * stdlib/Makefile ($(objpfx)isomac.out): Likewise. ($(objpfx)tst-fmtmsg.out): Likewise. * string/Makefile ($(objpfx)tst-svc-cmp.out): Likewise. * sysdeps/x86/Makefile ($(objpfx)tst-xmmymm.out): Likewise. localedata: * Makefile ($(objpfx)sort-test.out): Use $(evaluate-test). ($(objpfx)tst-fmon.out): Likewise. ($(objpfx)tst-numeric.out): Likewise. ($(objpfx)tst-locale.out): Likewise. ($(objpfx)tst-rpmatch.out): Likewise. ($(objpfx)tst-trans.out): Likewise. ($(objpfx)tst-mbswcs.out): Likewise. ($(objpfx)tst-ctype.out): Likewise. ($(objpfx)tst-wctype.out): Likewise. ($(objpfx)tst-langinfo.out): Likewise. ($(objpfx)mtrace-tst-leaks): Likewise. nptl: * Makefile ($(objpfx)tst-stack3-mem): Use $(evaluate-test). ($(objpfx)tst-tls6.out): Likewise. ($(objpfx)tst-cleanup0.out): Likewise. ($(objpfx)tst-cleanup0-cmp.out): Likewise. ($(objpfx)tst-cancel-wrappers.out): Likewise. ($(objpfx)tst-oddstacklimit.out): Likewise. nptl_db: * Makefile ($(objpfx)db-symbols.out): Use $(evaluate-test).
2014-02-21 21:48:08 +00:00
$(common-objpfx)malloc/mtrace $(objpfx)bug-regex31.mtrace > $@; \
$(evaluate-test)
2010-10-11 16:34:53 +00:00
bug-regex36-ENV = MALLOC_TRACE=$(objpfx)bug-regex36.mtrace
$(objpfx)bug-regex36-mem.out: $(objpfx)bug-regex36.out
$(common-objpfx)malloc/mtrace $(objpfx)bug-regex36.mtrace > $@; \
$(evaluate-test)
tst-vfork3-ENV = MALLOC_TRACE=$(objpfx)tst-vfork3.mtrace
Make tests consistently use *.out output files. This patch systematically renames miscellaneous tests so their outputs use a *.out name (unless the test is just running some glibc program with its conventional output file name, rather than a special program at all, as in catgets tests generating *.cat). In the case of the iconv test test-iconvconfig, output is redirected where it wasn't before. In various places the "generated" variable is updated to reflect the revised test names; in iconvdata/Makefile a typo (mmtrace-tst-loading) is also fixed. resolv/Makefile sets both "generate" (which appears unused) and "generated". Bitrot in the settings of these variables could no doubt be fixed so that "make clean" after build and testing leaves results the same as after configure (and indeed the tests-special / xtests-special variables could be used to simplify things, by removing those files automatically rather than listing them manually in these variables), and "make distclean" leaves an empty build directory, but right now it appears various files don't get deleted. I think they are liable to continue to bitrot in the absence of routine testing that these targets actually work, given that building in the source directory isn't supported and that was the main use of such makefile targets. Tested x86_64. * elf/Makefile (tests-special): Rename tests to end with .out. ($(objpfx)noload-mem): Likewise. ($(objpfx)tst-leaks1-mem): Likewise. ($(objpfx)tst-leaks1-static-mem.out): Likewise. * iconv/Makefile (xtests-special): Change test-iconvconfig to $(objpfx)test-iconvconfig.out. (test-iconvconfig): Change to $(objpfx)test-iconvconfig.out. Use set -e inside subshell and redirect output to file. * iconvdata/Makefile (generated): Rename tests to end with .out. Correct type. (tests-special): Rename tests to end with .out. ($(objpfx)mtrace-tst-loading): Likewise. * intl/Makefile (generated): Likewise. (tests-special): Likewise. ($(objpfx)mtrace-tst-gettext): Likewise. * misc/Makefile (generated): Likewise. (tests-special): Likewise. ($(objpfx)tst-error1-mem): Likewise. * nptl/Makefile (tests-special): Likewise. ($(objpfx)tst-stack3-mem): Likewise. (generated): Likewise. * posix/Makefile (generated): Likewise. (tests-special): Likewise. (xtests-special): Likewise. ($(objpfx)tst-fnmatch-mem): Likewise. ($(objpfx)bug-regex2-mem): Likewise. ($(objpfx)bug-regex14-mem): Likewise. ($(objpfx)bug-regex21-mem): Likewise. ($(objpfx)bug-regex31-mem): Likewise. ($(objpfx)tst-vfork3-mem): Likewise. ($(objpfx)tst-rxspencer-no-utf8-mem): Likewise. ($(objpfx)tst-pcre-mem): Likewise. ($(objpfx)tst-boost-mem): Likewise. ($(objpfx)bug-ga2-mem): Likewise. ($(objpfx)bug-glob2-mem): Likewise. * resolv/Makefile (generate): Likewise. (tests-special): Likewise. (xtests-special): Likewise. (generated): Likewise. ($(objpfx)mtrace-tst-leaks): Likewise. ($(objpfx)mtrace-tst-leaks2): Likewise. localedata: * Makefile (generated): Rename tests to end with .out. (tests-special): Likewise. ($(objpfx)mtrace-tst-leaks): Likewise.
2014-03-07 03:29:23 +00:00
$(objpfx)tst-vfork3-mem.out: $(objpfx)tst-vfork3.out
Generate .test-result files for tests with special rules. This patch, an updated version of <https://sourceware.org/ml/libc-alpha/2014-01/msg00194.html> now proposed for inclusion in glibc, extends the generation of PASS and FAIL status in .test-result files for individual tests to cover tests with their own custom makefile rules. This is just adding $(evaluate-test) calls to all such rules, since tests with multiple commands were previously split into separate tests. Note that the tests the makefiles expect to fail (posix/annexc and conformtest) currently get FAIL listed in the .test-result file, rather than XFAIL; a subsequent patch will introduce a better XFAIL mechanism. Tested x86_64. * Makefile ($(objpfx)c++-types-check.out): Use $(evaluate-test). ($(objpfx)check-local-headers.out): Likewise. ($(objpfx)begin-end-check.out): Likewise. * Makerules (check-abi-%.out): Likewise. * catgets/Makefile ($(objpfx)test1.cat): Likewise. ($(objpfx)test2.cat): Likewise. ($(objpfx)de/libc.cat): Likewise. ($(objpfx)test-gencat.out): Likewise. * conform/Makefile ($(objpfx)run-conformtest.out): Likewise. * elf/Makefile ($(objpfx)order-cmp.out): Likewise. ($(objpfx)noload-mem): Likewise. ($(objpfx)tst-pathopt.out): Likewise. ($(objpfx)tst-rtld-load-self.out): Likewise. ($(objpfx)tst-array1-cmp.out): Likewise. ($(objpfx)tst-array1-static-cmp.out): Likewise. ($(objpfx)tst-array2-cmp.out): Likewise. ($(objpfx)tst-array3-cmp.out): Likewise. ($(objpfx)tst-array4-cmp.out): Likewise. ($(objpfx)tst-array5-cmp.out): Likewise. ($(objpfx)tst-array5-static-cmp.out): Likewise. ($(objpfx)check-textrel.out): Likewise. ($(objpfx)check-execstack.out): Likewise. ($(objpfx)check-localplt.out): Likewise. ($(objpfx)order2-cmp.out): Likewise. ($(objpfx)tst-leaks1-mem): Likewise. ($(objpfx)tst-leaks1-static-mem): Likewise. ($(objpfx)tst-initorder-cmp.out): Likewise. ($(objpfx)tst-initorder2-cmp.out): Likewise. ($(objpfx)tst-unused-dep.out): Likewise. ($(objpfx)tst-unused-dep-cmp.out): Likewise. * grp/Makefile ($(objpfx)tst_fgetgrent.out): Likewise. * iconv/Makefile (test-iconvconfig): Likewise. * iconvdata/Makefile ($(objpfx)mtrace-tst-loading): Likewise. ($(objpfx)iconv-test.out): Likewise. ($(objpfx)tst-tables.out): Likewise. * intl/Makefile ($(objpfx)mtrace-tst-gettext): Likewise. ($(objpfx)tst-gettext.out): Likewise. ($(objpfx)tst-translit.out): Likewise. ($(objpfx)tst-gettext2.out): Likewise. ($(objpfx)tst-gettext4.out): Likewise. ($(objpfx)tst-gettext6.out): Likewise. * io/Makefile ($(objpfx)ftwtest.out): Likewise. * libio/Makefile ($(objpfx)test-freopen.out): Likewise. ($(objpfx)tst-fopenloc-cmp.out): Likewise. ($(objpfx)tst-fopenloc-mem.out): Likewise. * malloc/Makefile ($(objpfx)tst-mtrace.out): Likewise. * misc/Makefile ($(objpfx)tst-error1-mem): Likewise. * posix/Makefile ($(objpfx)globtest.out): Likewise. ($(objpfx)wordexp-tst.out): Likewise. ($(objpfx)annexc.out): Likewise. ($(objpfx)tst-fnmatch-mem): Likewise. ($(objpfx)bug-regex2-mem): Likewise. ($(objpfx)bug-regex14-mem): Likewise. ($(objpfx)bug-regex21-mem): Likewise. ($(objpfx)bug-regex31-mem): Likewise. ($(objpfx)tst-vfork3-mem): Likewise. ($(objpfx)tst-rxspencer-no-utf8-mem): Likewise. ($(objpfx)tst-pcre-mem): Likewise. ($(objpfx)tst-boost-mem): Likewise. ($(objpfx)tst-getconf.out): Likewise. ($(objpfx)bug-ga2-mem): Likewise. ($(objpfx)bug-glob2-mem): Likewise. * resolv/Makefile ($(objpfx)mtrace-tst-leaks): Likewise. ($(objpfx)mtrace-tst-leaks2): Likewise. * stdio-common/Makefile ($(objpfx)tst-unbputc.out): Likewise. ($(objpfx)tst-printf.out): Likewise. ($(objpfx)tst-setvbuf1.out): Likewise. ($(objpfx)tst-setvbuf1-cmp.out): Likewise. * stdlib/Makefile ($(objpfx)isomac.out): Likewise. ($(objpfx)tst-fmtmsg.out): Likewise. * string/Makefile ($(objpfx)tst-svc-cmp.out): Likewise. * sysdeps/x86/Makefile ($(objpfx)tst-xmmymm.out): Likewise. localedata: * Makefile ($(objpfx)sort-test.out): Use $(evaluate-test). ($(objpfx)tst-fmon.out): Likewise. ($(objpfx)tst-numeric.out): Likewise. ($(objpfx)tst-locale.out): Likewise. ($(objpfx)tst-rpmatch.out): Likewise. ($(objpfx)tst-trans.out): Likewise. ($(objpfx)tst-mbswcs.out): Likewise. ($(objpfx)tst-ctype.out): Likewise. ($(objpfx)tst-wctype.out): Likewise. ($(objpfx)tst-langinfo.out): Likewise. ($(objpfx)mtrace-tst-leaks): Likewise. nptl: * Makefile ($(objpfx)tst-stack3-mem): Use $(evaluate-test). ($(objpfx)tst-tls6.out): Likewise. ($(objpfx)tst-cleanup0.out): Likewise. ($(objpfx)tst-cleanup0-cmp.out): Likewise. ($(objpfx)tst-cancel-wrappers.out): Likewise. ($(objpfx)tst-oddstacklimit.out): Likewise. nptl_db: * Makefile ($(objpfx)db-symbols.out): Use $(evaluate-test).
2014-02-21 21:48:08 +00:00
$(common-objpfx)malloc/mtrace $(objpfx)tst-vfork3.mtrace > $@; \
$(evaluate-test)
Split up rules for tests using mtrace and something else. Most glibc tests that use mtrace to verify that there were no memory leaks from the glibc facilities used in a given test depend on the .out file of the previous test so that the mtrace test runs mtrace and nothing else. Two, however, have a single target combining mtrace with something else. In the case of libio/tst-fopenloc.check, the test both compares the output with an expected baseline and runs mtrace. In the case of posix/tst-rxspencer-mem, the test is run (with different command line from the main run) and then mtrace is run, from the same makefile target. This patch splits both of these tests up to use separate makefile targets for each thing tested; in the tst-rxspencer case, a file tst-rxspencer-no-utf8.c is created that just includes tst-rxspencer.c, as is usual for tests where the same code gets tested in different compile-time or runtime configurations. Adding $(evaluate-test) to test commands, as in <https://sourceware.org/ml/libc-alpha/2014-01/msg00194.html>, will no longer need to insert && between multiple commands, as all tests will either have just a single command or already use &&. Tested x86_64. * libio/Makefile ($(objpfx)tst-fopenloc.check): Split into separate $(objpfx)tst-fopenloc-cmp.out and $(objpfx)tst-fopenloc-mem.out targets. (tests): Update dependencies. * posix/Makefile (tests variable): Add tst-rxspencer-no-utf8. (generated): Change tst-rxspencer-mem and tst-rxspencer.mtrace to tst-rxspencer-no-utf8-mem and tst-rxspencer-no-utf8.mtrace. (tst-rxspencer-no-utf8-ARGS): New variable. (tst-rxspencer-no-utf8-ENV): Likewise. (tests target): Depend on $(objpfx)tst-rxspencer-no-utf8-mem instead of $(objpfx)tst-rxspencer-mem. ($(objpfx)tst-rxspencer-mem): Change target to $(objpfx)tst-rxspencer-no-utf8-mem. Depend on $(objpfx)tst-rxspencer-no-utf8.out instead of running test program. * posix/tst-rxspencer-no-utf8.c: New file.
2014-02-14 13:45:14 +00:00
# tst-rxspencer.mtrace is not generated, only
# tst-rxspencer-no-utf8.mtrace, since otherwise the file has almost
# 100M and takes very long time to process.
tst-rxspencer-no-utf8-ENV += MALLOC_TRACE=$(objpfx)tst-rxspencer-no-utf8.mtrace
Make tests consistently use *.out output files. This patch systematically renames miscellaneous tests so their outputs use a *.out name (unless the test is just running some glibc program with its conventional output file name, rather than a special program at all, as in catgets tests generating *.cat). In the case of the iconv test test-iconvconfig, output is redirected where it wasn't before. In various places the "generated" variable is updated to reflect the revised test names; in iconvdata/Makefile a typo (mmtrace-tst-loading) is also fixed. resolv/Makefile sets both "generate" (which appears unused) and "generated". Bitrot in the settings of these variables could no doubt be fixed so that "make clean" after build and testing leaves results the same as after configure (and indeed the tests-special / xtests-special variables could be used to simplify things, by removing those files automatically rather than listing them manually in these variables), and "make distclean" leaves an empty build directory, but right now it appears various files don't get deleted. I think they are liable to continue to bitrot in the absence of routine testing that these targets actually work, given that building in the source directory isn't supported and that was the main use of such makefile targets. Tested x86_64. * elf/Makefile (tests-special): Rename tests to end with .out. ($(objpfx)noload-mem): Likewise. ($(objpfx)tst-leaks1-mem): Likewise. ($(objpfx)tst-leaks1-static-mem.out): Likewise. * iconv/Makefile (xtests-special): Change test-iconvconfig to $(objpfx)test-iconvconfig.out. (test-iconvconfig): Change to $(objpfx)test-iconvconfig.out. Use set -e inside subshell and redirect output to file. * iconvdata/Makefile (generated): Rename tests to end with .out. Correct type. (tests-special): Rename tests to end with .out. ($(objpfx)mtrace-tst-loading): Likewise. * intl/Makefile (generated): Likewise. (tests-special): Likewise. ($(objpfx)mtrace-tst-gettext): Likewise. * misc/Makefile (generated): Likewise. (tests-special): Likewise. ($(objpfx)tst-error1-mem): Likewise. * nptl/Makefile (tests-special): Likewise. ($(objpfx)tst-stack3-mem): Likewise. (generated): Likewise. * posix/Makefile (generated): Likewise. (tests-special): Likewise. (xtests-special): Likewise. ($(objpfx)tst-fnmatch-mem): Likewise. ($(objpfx)bug-regex2-mem): Likewise. ($(objpfx)bug-regex14-mem): Likewise. ($(objpfx)bug-regex21-mem): Likewise. ($(objpfx)bug-regex31-mem): Likewise. ($(objpfx)tst-vfork3-mem): Likewise. ($(objpfx)tst-rxspencer-no-utf8-mem): Likewise. ($(objpfx)tst-pcre-mem): Likewise. ($(objpfx)tst-boost-mem): Likewise. ($(objpfx)bug-ga2-mem): Likewise. ($(objpfx)bug-glob2-mem): Likewise. * resolv/Makefile (generate): Likewise. (tests-special): Likewise. (xtests-special): Likewise. (generated): Likewise. ($(objpfx)mtrace-tst-leaks): Likewise. ($(objpfx)mtrace-tst-leaks2): Likewise. localedata: * Makefile (generated): Rename tests to end with .out. (tests-special): Likewise. ($(objpfx)mtrace-tst-leaks): Likewise.
2014-03-07 03:29:23 +00:00
$(objpfx)tst-rxspencer-no-utf8-mem.out: $(objpfx)tst-rxspencer-no-utf8.out
Generate .test-result files for tests with special rules. This patch, an updated version of <https://sourceware.org/ml/libc-alpha/2014-01/msg00194.html> now proposed for inclusion in glibc, extends the generation of PASS and FAIL status in .test-result files for individual tests to cover tests with their own custom makefile rules. This is just adding $(evaluate-test) calls to all such rules, since tests with multiple commands were previously split into separate tests. Note that the tests the makefiles expect to fail (posix/annexc and conformtest) currently get FAIL listed in the .test-result file, rather than XFAIL; a subsequent patch will introduce a better XFAIL mechanism. Tested x86_64. * Makefile ($(objpfx)c++-types-check.out): Use $(evaluate-test). ($(objpfx)check-local-headers.out): Likewise. ($(objpfx)begin-end-check.out): Likewise. * Makerules (check-abi-%.out): Likewise. * catgets/Makefile ($(objpfx)test1.cat): Likewise. ($(objpfx)test2.cat): Likewise. ($(objpfx)de/libc.cat): Likewise. ($(objpfx)test-gencat.out): Likewise. * conform/Makefile ($(objpfx)run-conformtest.out): Likewise. * elf/Makefile ($(objpfx)order-cmp.out): Likewise. ($(objpfx)noload-mem): Likewise. ($(objpfx)tst-pathopt.out): Likewise. ($(objpfx)tst-rtld-load-self.out): Likewise. ($(objpfx)tst-array1-cmp.out): Likewise. ($(objpfx)tst-array1-static-cmp.out): Likewise. ($(objpfx)tst-array2-cmp.out): Likewise. ($(objpfx)tst-array3-cmp.out): Likewise. ($(objpfx)tst-array4-cmp.out): Likewise. ($(objpfx)tst-array5-cmp.out): Likewise. ($(objpfx)tst-array5-static-cmp.out): Likewise. ($(objpfx)check-textrel.out): Likewise. ($(objpfx)check-execstack.out): Likewise. ($(objpfx)check-localplt.out): Likewise. ($(objpfx)order2-cmp.out): Likewise. ($(objpfx)tst-leaks1-mem): Likewise. ($(objpfx)tst-leaks1-static-mem): Likewise. ($(objpfx)tst-initorder-cmp.out): Likewise. ($(objpfx)tst-initorder2-cmp.out): Likewise. ($(objpfx)tst-unused-dep.out): Likewise. ($(objpfx)tst-unused-dep-cmp.out): Likewise. * grp/Makefile ($(objpfx)tst_fgetgrent.out): Likewise. * iconv/Makefile (test-iconvconfig): Likewise. * iconvdata/Makefile ($(objpfx)mtrace-tst-loading): Likewise. ($(objpfx)iconv-test.out): Likewise. ($(objpfx)tst-tables.out): Likewise. * intl/Makefile ($(objpfx)mtrace-tst-gettext): Likewise. ($(objpfx)tst-gettext.out): Likewise. ($(objpfx)tst-translit.out): Likewise. ($(objpfx)tst-gettext2.out): Likewise. ($(objpfx)tst-gettext4.out): Likewise. ($(objpfx)tst-gettext6.out): Likewise. * io/Makefile ($(objpfx)ftwtest.out): Likewise. * libio/Makefile ($(objpfx)test-freopen.out): Likewise. ($(objpfx)tst-fopenloc-cmp.out): Likewise. ($(objpfx)tst-fopenloc-mem.out): Likewise. * malloc/Makefile ($(objpfx)tst-mtrace.out): Likewise. * misc/Makefile ($(objpfx)tst-error1-mem): Likewise. * posix/Makefile ($(objpfx)globtest.out): Likewise. ($(objpfx)wordexp-tst.out): Likewise. ($(objpfx)annexc.out): Likewise. ($(objpfx)tst-fnmatch-mem): Likewise. ($(objpfx)bug-regex2-mem): Likewise. ($(objpfx)bug-regex14-mem): Likewise. ($(objpfx)bug-regex21-mem): Likewise. ($(objpfx)bug-regex31-mem): Likewise. ($(objpfx)tst-vfork3-mem): Likewise. ($(objpfx)tst-rxspencer-no-utf8-mem): Likewise. ($(objpfx)tst-pcre-mem): Likewise. ($(objpfx)tst-boost-mem): Likewise. ($(objpfx)tst-getconf.out): Likewise. ($(objpfx)bug-ga2-mem): Likewise. ($(objpfx)bug-glob2-mem): Likewise. * resolv/Makefile ($(objpfx)mtrace-tst-leaks): Likewise. ($(objpfx)mtrace-tst-leaks2): Likewise. * stdio-common/Makefile ($(objpfx)tst-unbputc.out): Likewise. ($(objpfx)tst-printf.out): Likewise. ($(objpfx)tst-setvbuf1.out): Likewise. ($(objpfx)tst-setvbuf1-cmp.out): Likewise. * stdlib/Makefile ($(objpfx)isomac.out): Likewise. ($(objpfx)tst-fmtmsg.out): Likewise. * string/Makefile ($(objpfx)tst-svc-cmp.out): Likewise. * sysdeps/x86/Makefile ($(objpfx)tst-xmmymm.out): Likewise. localedata: * Makefile ($(objpfx)sort-test.out): Use $(evaluate-test). ($(objpfx)tst-fmon.out): Likewise. ($(objpfx)tst-numeric.out): Likewise. ($(objpfx)tst-locale.out): Likewise. ($(objpfx)tst-rpmatch.out): Likewise. ($(objpfx)tst-trans.out): Likewise. ($(objpfx)tst-mbswcs.out): Likewise. ($(objpfx)tst-ctype.out): Likewise. ($(objpfx)tst-wctype.out): Likewise. ($(objpfx)tst-langinfo.out): Likewise. ($(objpfx)mtrace-tst-leaks): Likewise. nptl: * Makefile ($(objpfx)tst-stack3-mem): Use $(evaluate-test). ($(objpfx)tst-tls6.out): Likewise. ($(objpfx)tst-cleanup0.out): Likewise. ($(objpfx)tst-cleanup0-cmp.out): Likewise. ($(objpfx)tst-cancel-wrappers.out): Likewise. ($(objpfx)tst-oddstacklimit.out): Likewise. nptl_db: * Makefile ($(objpfx)db-symbols.out): Use $(evaluate-test).
2014-02-21 21:48:08 +00:00
$(common-objpfx)malloc/mtrace $(objpfx)tst-rxspencer-no-utf8.mtrace \
> $@; \
$(evaluate-test)
Update. 2003-11-19 Jakub Jelinek <jakub@redhat.com> * posix/regexec.c (extend_buffers): Don't allocate twice as big state_log as needed. Don't modify pstr->valid_len for mb_cur_max == 1 !icase !trans. * posix/regcomp.c (free_bin_tree): Removed. (create_tree): Add dfa argument. Don't call re_malloc for each tree, instead allocate from str_tree_storage. (re_dfa_add_tree_node): New function. (free_dfa_content): Handle freeing if dfa->nodes == NULL or dfa->state_table == NULL. (re_compile_internal): Call free_dfa_content if init_dfa fails. Call free_workarea_compile, re_string_destruct and free_dfa_content for most of the other failure paths. (init_dfa): Initialize str_tree_storage_idx. Don't clear any fields on allocation failure. (free_workarea_compile): Free str_tree_storage chunks instead of free_bin_tree (dfa->str_tree). (parse): Call re_dfa_add_tree_node instead of re_dfa_add_node followed by create_tree. Add dfa argument to remaining create_tree calls. Remove new_idx variable. Remove calls to free_bin_tree. (parse_reg_exp, parse_branch, parse_expression, parse_sub_exp, parse_dup_op, parse_bracket_exp, build_charclass_op): Likewise. (duplicate_tree): Remove calls to free_bin_tree, add dfa argument to create_tree. * posix/regex_internal.h (BIN_TREE_STORAGE_SIZE): Define. (bin_tree_storage_t): New type. (re_dfa_t): Add str_tree_storage and str_tree_storage_idx fields. * posix/Makefile (tests): Add bug-regex21. (generated): Add bug-regex21-mem, bug-regex21.mtrace, tst-rxspencer-mem and tst-rxspencer.mtrace. (tests): Depend on $(objpfx)bug-regex21-mem and $(objpfx)tst-rxspencer-mem. (bug-regex21-ENV, tst-rxspencer-ENV): Set. ($(objpfx)bug-regex21-mem, $(objpfx)tst-rxspencer-mem): New. * posix/tst-rxspencer.c (main): Add call to mtrace. Free line at the end. * posix/bug-regex21.c: New test. * posix/regexec.c (get_subexp): After calling get_subexp_sub
2003-11-19 19:37:31 +00:00
tst-pcre-ENV = MALLOC_TRACE=$(objpfx)tst-pcre.mtrace
Make tests consistently use *.out output files. This patch systematically renames miscellaneous tests so their outputs use a *.out name (unless the test is just running some glibc program with its conventional output file name, rather than a special program at all, as in catgets tests generating *.cat). In the case of the iconv test test-iconvconfig, output is redirected where it wasn't before. In various places the "generated" variable is updated to reflect the revised test names; in iconvdata/Makefile a typo (mmtrace-tst-loading) is also fixed. resolv/Makefile sets both "generate" (which appears unused) and "generated". Bitrot in the settings of these variables could no doubt be fixed so that "make clean" after build and testing leaves results the same as after configure (and indeed the tests-special / xtests-special variables could be used to simplify things, by removing those files automatically rather than listing them manually in these variables), and "make distclean" leaves an empty build directory, but right now it appears various files don't get deleted. I think they are liable to continue to bitrot in the absence of routine testing that these targets actually work, given that building in the source directory isn't supported and that was the main use of such makefile targets. Tested x86_64. * elf/Makefile (tests-special): Rename tests to end with .out. ($(objpfx)noload-mem): Likewise. ($(objpfx)tst-leaks1-mem): Likewise. ($(objpfx)tst-leaks1-static-mem.out): Likewise. * iconv/Makefile (xtests-special): Change test-iconvconfig to $(objpfx)test-iconvconfig.out. (test-iconvconfig): Change to $(objpfx)test-iconvconfig.out. Use set -e inside subshell and redirect output to file. * iconvdata/Makefile (generated): Rename tests to end with .out. Correct type. (tests-special): Rename tests to end with .out. ($(objpfx)mtrace-tst-loading): Likewise. * intl/Makefile (generated): Likewise. (tests-special): Likewise. ($(objpfx)mtrace-tst-gettext): Likewise. * misc/Makefile (generated): Likewise. (tests-special): Likewise. ($(objpfx)tst-error1-mem): Likewise. * nptl/Makefile (tests-special): Likewise. ($(objpfx)tst-stack3-mem): Likewise. (generated): Likewise. * posix/Makefile (generated): Likewise. (tests-special): Likewise. (xtests-special): Likewise. ($(objpfx)tst-fnmatch-mem): Likewise. ($(objpfx)bug-regex2-mem): Likewise. ($(objpfx)bug-regex14-mem): Likewise. ($(objpfx)bug-regex21-mem): Likewise. ($(objpfx)bug-regex31-mem): Likewise. ($(objpfx)tst-vfork3-mem): Likewise. ($(objpfx)tst-rxspencer-no-utf8-mem): Likewise. ($(objpfx)tst-pcre-mem): Likewise. ($(objpfx)tst-boost-mem): Likewise. ($(objpfx)bug-ga2-mem): Likewise. ($(objpfx)bug-glob2-mem): Likewise. * resolv/Makefile (generate): Likewise. (tests-special): Likewise. (xtests-special): Likewise. (generated): Likewise. ($(objpfx)mtrace-tst-leaks): Likewise. ($(objpfx)mtrace-tst-leaks2): Likewise. localedata: * Makefile (generated): Rename tests to end with .out. (tests-special): Likewise. ($(objpfx)mtrace-tst-leaks): Likewise.
2014-03-07 03:29:23 +00:00
$(objpfx)tst-pcre-mem.out: $(objpfx)tst-pcre.out
Generate .test-result files for tests with special rules. This patch, an updated version of <https://sourceware.org/ml/libc-alpha/2014-01/msg00194.html> now proposed for inclusion in glibc, extends the generation of PASS and FAIL status in .test-result files for individual tests to cover tests with their own custom makefile rules. This is just adding $(evaluate-test) calls to all such rules, since tests with multiple commands were previously split into separate tests. Note that the tests the makefiles expect to fail (posix/annexc and conformtest) currently get FAIL listed in the .test-result file, rather than XFAIL; a subsequent patch will introduce a better XFAIL mechanism. Tested x86_64. * Makefile ($(objpfx)c++-types-check.out): Use $(evaluate-test). ($(objpfx)check-local-headers.out): Likewise. ($(objpfx)begin-end-check.out): Likewise. * Makerules (check-abi-%.out): Likewise. * catgets/Makefile ($(objpfx)test1.cat): Likewise. ($(objpfx)test2.cat): Likewise. ($(objpfx)de/libc.cat): Likewise. ($(objpfx)test-gencat.out): Likewise. * conform/Makefile ($(objpfx)run-conformtest.out): Likewise. * elf/Makefile ($(objpfx)order-cmp.out): Likewise. ($(objpfx)noload-mem): Likewise. ($(objpfx)tst-pathopt.out): Likewise. ($(objpfx)tst-rtld-load-self.out): Likewise. ($(objpfx)tst-array1-cmp.out): Likewise. ($(objpfx)tst-array1-static-cmp.out): Likewise. ($(objpfx)tst-array2-cmp.out): Likewise. ($(objpfx)tst-array3-cmp.out): Likewise. ($(objpfx)tst-array4-cmp.out): Likewise. ($(objpfx)tst-array5-cmp.out): Likewise. ($(objpfx)tst-array5-static-cmp.out): Likewise. ($(objpfx)check-textrel.out): Likewise. ($(objpfx)check-execstack.out): Likewise. ($(objpfx)check-localplt.out): Likewise. ($(objpfx)order2-cmp.out): Likewise. ($(objpfx)tst-leaks1-mem): Likewise. ($(objpfx)tst-leaks1-static-mem): Likewise. ($(objpfx)tst-initorder-cmp.out): Likewise. ($(objpfx)tst-initorder2-cmp.out): Likewise. ($(objpfx)tst-unused-dep.out): Likewise. ($(objpfx)tst-unused-dep-cmp.out): Likewise. * grp/Makefile ($(objpfx)tst_fgetgrent.out): Likewise. * iconv/Makefile (test-iconvconfig): Likewise. * iconvdata/Makefile ($(objpfx)mtrace-tst-loading): Likewise. ($(objpfx)iconv-test.out): Likewise. ($(objpfx)tst-tables.out): Likewise. * intl/Makefile ($(objpfx)mtrace-tst-gettext): Likewise. ($(objpfx)tst-gettext.out): Likewise. ($(objpfx)tst-translit.out): Likewise. ($(objpfx)tst-gettext2.out): Likewise. ($(objpfx)tst-gettext4.out): Likewise. ($(objpfx)tst-gettext6.out): Likewise. * io/Makefile ($(objpfx)ftwtest.out): Likewise. * libio/Makefile ($(objpfx)test-freopen.out): Likewise. ($(objpfx)tst-fopenloc-cmp.out): Likewise. ($(objpfx)tst-fopenloc-mem.out): Likewise. * malloc/Makefile ($(objpfx)tst-mtrace.out): Likewise. * misc/Makefile ($(objpfx)tst-error1-mem): Likewise. * posix/Makefile ($(objpfx)globtest.out): Likewise. ($(objpfx)wordexp-tst.out): Likewise. ($(objpfx)annexc.out): Likewise. ($(objpfx)tst-fnmatch-mem): Likewise. ($(objpfx)bug-regex2-mem): Likewise. ($(objpfx)bug-regex14-mem): Likewise. ($(objpfx)bug-regex21-mem): Likewise. ($(objpfx)bug-regex31-mem): Likewise. ($(objpfx)tst-vfork3-mem): Likewise. ($(objpfx)tst-rxspencer-no-utf8-mem): Likewise. ($(objpfx)tst-pcre-mem): Likewise. ($(objpfx)tst-boost-mem): Likewise. ($(objpfx)tst-getconf.out): Likewise. ($(objpfx)bug-ga2-mem): Likewise. ($(objpfx)bug-glob2-mem): Likewise. * resolv/Makefile ($(objpfx)mtrace-tst-leaks): Likewise. ($(objpfx)mtrace-tst-leaks2): Likewise. * stdio-common/Makefile ($(objpfx)tst-unbputc.out): Likewise. ($(objpfx)tst-printf.out): Likewise. ($(objpfx)tst-setvbuf1.out): Likewise. ($(objpfx)tst-setvbuf1-cmp.out): Likewise. * stdlib/Makefile ($(objpfx)isomac.out): Likewise. ($(objpfx)tst-fmtmsg.out): Likewise. * string/Makefile ($(objpfx)tst-svc-cmp.out): Likewise. * sysdeps/x86/Makefile ($(objpfx)tst-xmmymm.out): Likewise. localedata: * Makefile ($(objpfx)sort-test.out): Use $(evaluate-test). ($(objpfx)tst-fmon.out): Likewise. ($(objpfx)tst-numeric.out): Likewise. ($(objpfx)tst-locale.out): Likewise. ($(objpfx)tst-rpmatch.out): Likewise. ($(objpfx)tst-trans.out): Likewise. ($(objpfx)tst-mbswcs.out): Likewise. ($(objpfx)tst-ctype.out): Likewise. ($(objpfx)tst-wctype.out): Likewise. ($(objpfx)tst-langinfo.out): Likewise. ($(objpfx)mtrace-tst-leaks): Likewise. nptl: * Makefile ($(objpfx)tst-stack3-mem): Use $(evaluate-test). ($(objpfx)tst-tls6.out): Likewise. ($(objpfx)tst-cleanup0.out): Likewise. ($(objpfx)tst-cleanup0-cmp.out): Likewise. ($(objpfx)tst-cancel-wrappers.out): Likewise. ($(objpfx)tst-oddstacklimit.out): Likewise. nptl_db: * Makefile ($(objpfx)db-symbols.out): Use $(evaluate-test).
2014-02-21 21:48:08 +00:00
$(common-objpfx)malloc/mtrace $(objpfx)tst-pcre.mtrace > $@; \
$(evaluate-test)
tst-boost-ENV = MALLOC_TRACE=$(objpfx)tst-boost.mtrace
Make tests consistently use *.out output files. This patch systematically renames miscellaneous tests so their outputs use a *.out name (unless the test is just running some glibc program with its conventional output file name, rather than a special program at all, as in catgets tests generating *.cat). In the case of the iconv test test-iconvconfig, output is redirected where it wasn't before. In various places the "generated" variable is updated to reflect the revised test names; in iconvdata/Makefile a typo (mmtrace-tst-loading) is also fixed. resolv/Makefile sets both "generate" (which appears unused) and "generated". Bitrot in the settings of these variables could no doubt be fixed so that "make clean" after build and testing leaves results the same as after configure (and indeed the tests-special / xtests-special variables could be used to simplify things, by removing those files automatically rather than listing them manually in these variables), and "make distclean" leaves an empty build directory, but right now it appears various files don't get deleted. I think they are liable to continue to bitrot in the absence of routine testing that these targets actually work, given that building in the source directory isn't supported and that was the main use of such makefile targets. Tested x86_64. * elf/Makefile (tests-special): Rename tests to end with .out. ($(objpfx)noload-mem): Likewise. ($(objpfx)tst-leaks1-mem): Likewise. ($(objpfx)tst-leaks1-static-mem.out): Likewise. * iconv/Makefile (xtests-special): Change test-iconvconfig to $(objpfx)test-iconvconfig.out. (test-iconvconfig): Change to $(objpfx)test-iconvconfig.out. Use set -e inside subshell and redirect output to file. * iconvdata/Makefile (generated): Rename tests to end with .out. Correct type. (tests-special): Rename tests to end with .out. ($(objpfx)mtrace-tst-loading): Likewise. * intl/Makefile (generated): Likewise. (tests-special): Likewise. ($(objpfx)mtrace-tst-gettext): Likewise. * misc/Makefile (generated): Likewise. (tests-special): Likewise. ($(objpfx)tst-error1-mem): Likewise. * nptl/Makefile (tests-special): Likewise. ($(objpfx)tst-stack3-mem): Likewise. (generated): Likewise. * posix/Makefile (generated): Likewise. (tests-special): Likewise. (xtests-special): Likewise. ($(objpfx)tst-fnmatch-mem): Likewise. ($(objpfx)bug-regex2-mem): Likewise. ($(objpfx)bug-regex14-mem): Likewise. ($(objpfx)bug-regex21-mem): Likewise. ($(objpfx)bug-regex31-mem): Likewise. ($(objpfx)tst-vfork3-mem): Likewise. ($(objpfx)tst-rxspencer-no-utf8-mem): Likewise. ($(objpfx)tst-pcre-mem): Likewise. ($(objpfx)tst-boost-mem): Likewise. ($(objpfx)bug-ga2-mem): Likewise. ($(objpfx)bug-glob2-mem): Likewise. * resolv/Makefile (generate): Likewise. (tests-special): Likewise. (xtests-special): Likewise. (generated): Likewise. ($(objpfx)mtrace-tst-leaks): Likewise. ($(objpfx)mtrace-tst-leaks2): Likewise. localedata: * Makefile (generated): Rename tests to end with .out. (tests-special): Likewise. ($(objpfx)mtrace-tst-leaks): Likewise.
2014-03-07 03:29:23 +00:00
$(objpfx)tst-boost-mem.out: $(objpfx)tst-boost.out
Generate .test-result files for tests with special rules. This patch, an updated version of <https://sourceware.org/ml/libc-alpha/2014-01/msg00194.html> now proposed for inclusion in glibc, extends the generation of PASS and FAIL status in .test-result files for individual tests to cover tests with their own custom makefile rules. This is just adding $(evaluate-test) calls to all such rules, since tests with multiple commands were previously split into separate tests. Note that the tests the makefiles expect to fail (posix/annexc and conformtest) currently get FAIL listed in the .test-result file, rather than XFAIL; a subsequent patch will introduce a better XFAIL mechanism. Tested x86_64. * Makefile ($(objpfx)c++-types-check.out): Use $(evaluate-test). ($(objpfx)check-local-headers.out): Likewise. ($(objpfx)begin-end-check.out): Likewise. * Makerules (check-abi-%.out): Likewise. * catgets/Makefile ($(objpfx)test1.cat): Likewise. ($(objpfx)test2.cat): Likewise. ($(objpfx)de/libc.cat): Likewise. ($(objpfx)test-gencat.out): Likewise. * conform/Makefile ($(objpfx)run-conformtest.out): Likewise. * elf/Makefile ($(objpfx)order-cmp.out): Likewise. ($(objpfx)noload-mem): Likewise. ($(objpfx)tst-pathopt.out): Likewise. ($(objpfx)tst-rtld-load-self.out): Likewise. ($(objpfx)tst-array1-cmp.out): Likewise. ($(objpfx)tst-array1-static-cmp.out): Likewise. ($(objpfx)tst-array2-cmp.out): Likewise. ($(objpfx)tst-array3-cmp.out): Likewise. ($(objpfx)tst-array4-cmp.out): Likewise. ($(objpfx)tst-array5-cmp.out): Likewise. ($(objpfx)tst-array5-static-cmp.out): Likewise. ($(objpfx)check-textrel.out): Likewise. ($(objpfx)check-execstack.out): Likewise. ($(objpfx)check-localplt.out): Likewise. ($(objpfx)order2-cmp.out): Likewise. ($(objpfx)tst-leaks1-mem): Likewise. ($(objpfx)tst-leaks1-static-mem): Likewise. ($(objpfx)tst-initorder-cmp.out): Likewise. ($(objpfx)tst-initorder2-cmp.out): Likewise. ($(objpfx)tst-unused-dep.out): Likewise. ($(objpfx)tst-unused-dep-cmp.out): Likewise. * grp/Makefile ($(objpfx)tst_fgetgrent.out): Likewise. * iconv/Makefile (test-iconvconfig): Likewise. * iconvdata/Makefile ($(objpfx)mtrace-tst-loading): Likewise. ($(objpfx)iconv-test.out): Likewise. ($(objpfx)tst-tables.out): Likewise. * intl/Makefile ($(objpfx)mtrace-tst-gettext): Likewise. ($(objpfx)tst-gettext.out): Likewise. ($(objpfx)tst-translit.out): Likewise. ($(objpfx)tst-gettext2.out): Likewise. ($(objpfx)tst-gettext4.out): Likewise. ($(objpfx)tst-gettext6.out): Likewise. * io/Makefile ($(objpfx)ftwtest.out): Likewise. * libio/Makefile ($(objpfx)test-freopen.out): Likewise. ($(objpfx)tst-fopenloc-cmp.out): Likewise. ($(objpfx)tst-fopenloc-mem.out): Likewise. * malloc/Makefile ($(objpfx)tst-mtrace.out): Likewise. * misc/Makefile ($(objpfx)tst-error1-mem): Likewise. * posix/Makefile ($(objpfx)globtest.out): Likewise. ($(objpfx)wordexp-tst.out): Likewise. ($(objpfx)annexc.out): Likewise. ($(objpfx)tst-fnmatch-mem): Likewise. ($(objpfx)bug-regex2-mem): Likewise. ($(objpfx)bug-regex14-mem): Likewise. ($(objpfx)bug-regex21-mem): Likewise. ($(objpfx)bug-regex31-mem): Likewise. ($(objpfx)tst-vfork3-mem): Likewise. ($(objpfx)tst-rxspencer-no-utf8-mem): Likewise. ($(objpfx)tst-pcre-mem): Likewise. ($(objpfx)tst-boost-mem): Likewise. ($(objpfx)tst-getconf.out): Likewise. ($(objpfx)bug-ga2-mem): Likewise. ($(objpfx)bug-glob2-mem): Likewise. * resolv/Makefile ($(objpfx)mtrace-tst-leaks): Likewise. ($(objpfx)mtrace-tst-leaks2): Likewise. * stdio-common/Makefile ($(objpfx)tst-unbputc.out): Likewise. ($(objpfx)tst-printf.out): Likewise. ($(objpfx)tst-setvbuf1.out): Likewise. ($(objpfx)tst-setvbuf1-cmp.out): Likewise. * stdlib/Makefile ($(objpfx)isomac.out): Likewise. ($(objpfx)tst-fmtmsg.out): Likewise. * string/Makefile ($(objpfx)tst-svc-cmp.out): Likewise. * sysdeps/x86/Makefile ($(objpfx)tst-xmmymm.out): Likewise. localedata: * Makefile ($(objpfx)sort-test.out): Use $(evaluate-test). ($(objpfx)tst-fmon.out): Likewise. ($(objpfx)tst-numeric.out): Likewise. ($(objpfx)tst-locale.out): Likewise. ($(objpfx)tst-rpmatch.out): Likewise. ($(objpfx)tst-trans.out): Likewise. ($(objpfx)tst-mbswcs.out): Likewise. ($(objpfx)tst-ctype.out): Likewise. ($(objpfx)tst-wctype.out): Likewise. ($(objpfx)tst-langinfo.out): Likewise. ($(objpfx)mtrace-tst-leaks): Likewise. nptl: * Makefile ($(objpfx)tst-stack3-mem): Use $(evaluate-test). ($(objpfx)tst-tls6.out): Likewise. ($(objpfx)tst-cleanup0.out): Likewise. ($(objpfx)tst-cleanup0-cmp.out): Likewise. ($(objpfx)tst-cancel-wrappers.out): Likewise. ($(objpfx)tst-oddstacklimit.out): Likewise. nptl_db: * Makefile ($(objpfx)db-symbols.out): Use $(evaluate-test).
2014-02-21 21:48:08 +00:00
$(common-objpfx)malloc/mtrace $(objpfx)tst-boost.mtrace > $@; \
$(evaluate-test)
$(objpfx)tst-getconf.out: tst-getconf.sh $(objpfx)getconf
Generate .test-result files for tests with special rules. This patch, an updated version of <https://sourceware.org/ml/libc-alpha/2014-01/msg00194.html> now proposed for inclusion in glibc, extends the generation of PASS and FAIL status in .test-result files for individual tests to cover tests with their own custom makefile rules. This is just adding $(evaluate-test) calls to all such rules, since tests with multiple commands were previously split into separate tests. Note that the tests the makefiles expect to fail (posix/annexc and conformtest) currently get FAIL listed in the .test-result file, rather than XFAIL; a subsequent patch will introduce a better XFAIL mechanism. Tested x86_64. * Makefile ($(objpfx)c++-types-check.out): Use $(evaluate-test). ($(objpfx)check-local-headers.out): Likewise. ($(objpfx)begin-end-check.out): Likewise. * Makerules (check-abi-%.out): Likewise. * catgets/Makefile ($(objpfx)test1.cat): Likewise. ($(objpfx)test2.cat): Likewise. ($(objpfx)de/libc.cat): Likewise. ($(objpfx)test-gencat.out): Likewise. * conform/Makefile ($(objpfx)run-conformtest.out): Likewise. * elf/Makefile ($(objpfx)order-cmp.out): Likewise. ($(objpfx)noload-mem): Likewise. ($(objpfx)tst-pathopt.out): Likewise. ($(objpfx)tst-rtld-load-self.out): Likewise. ($(objpfx)tst-array1-cmp.out): Likewise. ($(objpfx)tst-array1-static-cmp.out): Likewise. ($(objpfx)tst-array2-cmp.out): Likewise. ($(objpfx)tst-array3-cmp.out): Likewise. ($(objpfx)tst-array4-cmp.out): Likewise. ($(objpfx)tst-array5-cmp.out): Likewise. ($(objpfx)tst-array5-static-cmp.out): Likewise. ($(objpfx)check-textrel.out): Likewise. ($(objpfx)check-execstack.out): Likewise. ($(objpfx)check-localplt.out): Likewise. ($(objpfx)order2-cmp.out): Likewise. ($(objpfx)tst-leaks1-mem): Likewise. ($(objpfx)tst-leaks1-static-mem): Likewise. ($(objpfx)tst-initorder-cmp.out): Likewise. ($(objpfx)tst-initorder2-cmp.out): Likewise. ($(objpfx)tst-unused-dep.out): Likewise. ($(objpfx)tst-unused-dep-cmp.out): Likewise. * grp/Makefile ($(objpfx)tst_fgetgrent.out): Likewise. * iconv/Makefile (test-iconvconfig): Likewise. * iconvdata/Makefile ($(objpfx)mtrace-tst-loading): Likewise. ($(objpfx)iconv-test.out): Likewise. ($(objpfx)tst-tables.out): Likewise. * intl/Makefile ($(objpfx)mtrace-tst-gettext): Likewise. ($(objpfx)tst-gettext.out): Likewise. ($(objpfx)tst-translit.out): Likewise. ($(objpfx)tst-gettext2.out): Likewise. ($(objpfx)tst-gettext4.out): Likewise. ($(objpfx)tst-gettext6.out): Likewise. * io/Makefile ($(objpfx)ftwtest.out): Likewise. * libio/Makefile ($(objpfx)test-freopen.out): Likewise. ($(objpfx)tst-fopenloc-cmp.out): Likewise. ($(objpfx)tst-fopenloc-mem.out): Likewise. * malloc/Makefile ($(objpfx)tst-mtrace.out): Likewise. * misc/Makefile ($(objpfx)tst-error1-mem): Likewise. * posix/Makefile ($(objpfx)globtest.out): Likewise. ($(objpfx)wordexp-tst.out): Likewise. ($(objpfx)annexc.out): Likewise. ($(objpfx)tst-fnmatch-mem): Likewise. ($(objpfx)bug-regex2-mem): Likewise. ($(objpfx)bug-regex14-mem): Likewise. ($(objpfx)bug-regex21-mem): Likewise. ($(objpfx)bug-regex31-mem): Likewise. ($(objpfx)tst-vfork3-mem): Likewise. ($(objpfx)tst-rxspencer-no-utf8-mem): Likewise. ($(objpfx)tst-pcre-mem): Likewise. ($(objpfx)tst-boost-mem): Likewise. ($(objpfx)tst-getconf.out): Likewise. ($(objpfx)bug-ga2-mem): Likewise. ($(objpfx)bug-glob2-mem): Likewise. * resolv/Makefile ($(objpfx)mtrace-tst-leaks): Likewise. ($(objpfx)mtrace-tst-leaks2): Likewise. * stdio-common/Makefile ($(objpfx)tst-unbputc.out): Likewise. ($(objpfx)tst-printf.out): Likewise. ($(objpfx)tst-setvbuf1.out): Likewise. ($(objpfx)tst-setvbuf1-cmp.out): Likewise. * stdlib/Makefile ($(objpfx)isomac.out): Likewise. ($(objpfx)tst-fmtmsg.out): Likewise. * string/Makefile ($(objpfx)tst-svc-cmp.out): Likewise. * sysdeps/x86/Makefile ($(objpfx)tst-xmmymm.out): Likewise. localedata: * Makefile ($(objpfx)sort-test.out): Use $(evaluate-test). ($(objpfx)tst-fmon.out): Likewise. ($(objpfx)tst-numeric.out): Likewise. ($(objpfx)tst-locale.out): Likewise. ($(objpfx)tst-rpmatch.out): Likewise. ($(objpfx)tst-trans.out): Likewise. ($(objpfx)tst-mbswcs.out): Likewise. ($(objpfx)tst-ctype.out): Likewise. ($(objpfx)tst-wctype.out): Likewise. ($(objpfx)tst-langinfo.out): Likewise. ($(objpfx)mtrace-tst-leaks): Likewise. nptl: * Makefile ($(objpfx)tst-stack3-mem): Use $(evaluate-test). ($(objpfx)tst-tls6.out): Likewise. ($(objpfx)tst-cleanup0.out): Likewise. ($(objpfx)tst-cleanup0-cmp.out): Likewise. ($(objpfx)tst-cancel-wrappers.out): Likewise. ($(objpfx)tst-oddstacklimit.out): Likewise. nptl_db: * Makefile ($(objpfx)db-symbols.out): Use $(evaluate-test).
2014-02-21 21:48:08 +00:00
$(SHELL) $< $(common-objpfx) '$(built-program-cmd)'; \
$(evaluate-test)
Make tests consistently use *.out output files. This patch systematically renames miscellaneous tests so their outputs use a *.out name (unless the test is just running some glibc program with its conventional output file name, rather than a special program at all, as in catgets tests generating *.cat). In the case of the iconv test test-iconvconfig, output is redirected where it wasn't before. In various places the "generated" variable is updated to reflect the revised test names; in iconvdata/Makefile a typo (mmtrace-tst-loading) is also fixed. resolv/Makefile sets both "generate" (which appears unused) and "generated". Bitrot in the settings of these variables could no doubt be fixed so that "make clean" after build and testing leaves results the same as after configure (and indeed the tests-special / xtests-special variables could be used to simplify things, by removing those files automatically rather than listing them manually in these variables), and "make distclean" leaves an empty build directory, but right now it appears various files don't get deleted. I think they are liable to continue to bitrot in the absence of routine testing that these targets actually work, given that building in the source directory isn't supported and that was the main use of such makefile targets. Tested x86_64. * elf/Makefile (tests-special): Rename tests to end with .out. ($(objpfx)noload-mem): Likewise. ($(objpfx)tst-leaks1-mem): Likewise. ($(objpfx)tst-leaks1-static-mem.out): Likewise. * iconv/Makefile (xtests-special): Change test-iconvconfig to $(objpfx)test-iconvconfig.out. (test-iconvconfig): Change to $(objpfx)test-iconvconfig.out. Use set -e inside subshell and redirect output to file. * iconvdata/Makefile (generated): Rename tests to end with .out. Correct type. (tests-special): Rename tests to end with .out. ($(objpfx)mtrace-tst-loading): Likewise. * intl/Makefile (generated): Likewise. (tests-special): Likewise. ($(objpfx)mtrace-tst-gettext): Likewise. * misc/Makefile (generated): Likewise. (tests-special): Likewise. ($(objpfx)tst-error1-mem): Likewise. * nptl/Makefile (tests-special): Likewise. ($(objpfx)tst-stack3-mem): Likewise. (generated): Likewise. * posix/Makefile (generated): Likewise. (tests-special): Likewise. (xtests-special): Likewise. ($(objpfx)tst-fnmatch-mem): Likewise. ($(objpfx)bug-regex2-mem): Likewise. ($(objpfx)bug-regex14-mem): Likewise. ($(objpfx)bug-regex21-mem): Likewise. ($(objpfx)bug-regex31-mem): Likewise. ($(objpfx)tst-vfork3-mem): Likewise. ($(objpfx)tst-rxspencer-no-utf8-mem): Likewise. ($(objpfx)tst-pcre-mem): Likewise. ($(objpfx)tst-boost-mem): Likewise. ($(objpfx)bug-ga2-mem): Likewise. ($(objpfx)bug-glob2-mem): Likewise. * resolv/Makefile (generate): Likewise. (tests-special): Likewise. (xtests-special): Likewise. (generated): Likewise. ($(objpfx)mtrace-tst-leaks): Likewise. ($(objpfx)mtrace-tst-leaks2): Likewise. localedata: * Makefile (generated): Rename tests to end with .out. (tests-special): Likewise. ($(objpfx)mtrace-tst-leaks): Likewise.
2014-03-07 03:29:23 +00:00
$(objpfx)bug-ga2-mem.out: $(objpfx)bug-ga2.out
Generate .test-result files for tests with special rules. This patch, an updated version of <https://sourceware.org/ml/libc-alpha/2014-01/msg00194.html> now proposed for inclusion in glibc, extends the generation of PASS and FAIL status in .test-result files for individual tests to cover tests with their own custom makefile rules. This is just adding $(evaluate-test) calls to all such rules, since tests with multiple commands were previously split into separate tests. Note that the tests the makefiles expect to fail (posix/annexc and conformtest) currently get FAIL listed in the .test-result file, rather than XFAIL; a subsequent patch will introduce a better XFAIL mechanism. Tested x86_64. * Makefile ($(objpfx)c++-types-check.out): Use $(evaluate-test). ($(objpfx)check-local-headers.out): Likewise. ($(objpfx)begin-end-check.out): Likewise. * Makerules (check-abi-%.out): Likewise. * catgets/Makefile ($(objpfx)test1.cat): Likewise. ($(objpfx)test2.cat): Likewise. ($(objpfx)de/libc.cat): Likewise. ($(objpfx)test-gencat.out): Likewise. * conform/Makefile ($(objpfx)run-conformtest.out): Likewise. * elf/Makefile ($(objpfx)order-cmp.out): Likewise. ($(objpfx)noload-mem): Likewise. ($(objpfx)tst-pathopt.out): Likewise. ($(objpfx)tst-rtld-load-self.out): Likewise. ($(objpfx)tst-array1-cmp.out): Likewise. ($(objpfx)tst-array1-static-cmp.out): Likewise. ($(objpfx)tst-array2-cmp.out): Likewise. ($(objpfx)tst-array3-cmp.out): Likewise. ($(objpfx)tst-array4-cmp.out): Likewise. ($(objpfx)tst-array5-cmp.out): Likewise. ($(objpfx)tst-array5-static-cmp.out): Likewise. ($(objpfx)check-textrel.out): Likewise. ($(objpfx)check-execstack.out): Likewise. ($(objpfx)check-localplt.out): Likewise. ($(objpfx)order2-cmp.out): Likewise. ($(objpfx)tst-leaks1-mem): Likewise. ($(objpfx)tst-leaks1-static-mem): Likewise. ($(objpfx)tst-initorder-cmp.out): Likewise. ($(objpfx)tst-initorder2-cmp.out): Likewise. ($(objpfx)tst-unused-dep.out): Likewise. ($(objpfx)tst-unused-dep-cmp.out): Likewise. * grp/Makefile ($(objpfx)tst_fgetgrent.out): Likewise. * iconv/Makefile (test-iconvconfig): Likewise. * iconvdata/Makefile ($(objpfx)mtrace-tst-loading): Likewise. ($(objpfx)iconv-test.out): Likewise. ($(objpfx)tst-tables.out): Likewise. * intl/Makefile ($(objpfx)mtrace-tst-gettext): Likewise. ($(objpfx)tst-gettext.out): Likewise. ($(objpfx)tst-translit.out): Likewise. ($(objpfx)tst-gettext2.out): Likewise. ($(objpfx)tst-gettext4.out): Likewise. ($(objpfx)tst-gettext6.out): Likewise. * io/Makefile ($(objpfx)ftwtest.out): Likewise. * libio/Makefile ($(objpfx)test-freopen.out): Likewise. ($(objpfx)tst-fopenloc-cmp.out): Likewise. ($(objpfx)tst-fopenloc-mem.out): Likewise. * malloc/Makefile ($(objpfx)tst-mtrace.out): Likewise. * misc/Makefile ($(objpfx)tst-error1-mem): Likewise. * posix/Makefile ($(objpfx)globtest.out): Likewise. ($(objpfx)wordexp-tst.out): Likewise. ($(objpfx)annexc.out): Likewise. ($(objpfx)tst-fnmatch-mem): Likewise. ($(objpfx)bug-regex2-mem): Likewise. ($(objpfx)bug-regex14-mem): Likewise. ($(objpfx)bug-regex21-mem): Likewise. ($(objpfx)bug-regex31-mem): Likewise. ($(objpfx)tst-vfork3-mem): Likewise. ($(objpfx)tst-rxspencer-no-utf8-mem): Likewise. ($(objpfx)tst-pcre-mem): Likewise. ($(objpfx)tst-boost-mem): Likewise. ($(objpfx)tst-getconf.out): Likewise. ($(objpfx)bug-ga2-mem): Likewise. ($(objpfx)bug-glob2-mem): Likewise. * resolv/Makefile ($(objpfx)mtrace-tst-leaks): Likewise. ($(objpfx)mtrace-tst-leaks2): Likewise. * stdio-common/Makefile ($(objpfx)tst-unbputc.out): Likewise. ($(objpfx)tst-printf.out): Likewise. ($(objpfx)tst-setvbuf1.out): Likewise. ($(objpfx)tst-setvbuf1-cmp.out): Likewise. * stdlib/Makefile ($(objpfx)isomac.out): Likewise. ($(objpfx)tst-fmtmsg.out): Likewise. * string/Makefile ($(objpfx)tst-svc-cmp.out): Likewise. * sysdeps/x86/Makefile ($(objpfx)tst-xmmymm.out): Likewise. localedata: * Makefile ($(objpfx)sort-test.out): Use $(evaluate-test). ($(objpfx)tst-fmon.out): Likewise. ($(objpfx)tst-numeric.out): Likewise. ($(objpfx)tst-locale.out): Likewise. ($(objpfx)tst-rpmatch.out): Likewise. ($(objpfx)tst-trans.out): Likewise. ($(objpfx)tst-mbswcs.out): Likewise. ($(objpfx)tst-ctype.out): Likewise. ($(objpfx)tst-wctype.out): Likewise. ($(objpfx)tst-langinfo.out): Likewise. ($(objpfx)mtrace-tst-leaks): Likewise. nptl: * Makefile ($(objpfx)tst-stack3-mem): Use $(evaluate-test). ($(objpfx)tst-tls6.out): Likewise. ($(objpfx)tst-cleanup0.out): Likewise. ($(objpfx)tst-cleanup0-cmp.out): Likewise. ($(objpfx)tst-cancel-wrappers.out): Likewise. ($(objpfx)tst-oddstacklimit.out): Likewise. nptl_db: * Makefile ($(objpfx)db-symbols.out): Use $(evaluate-test).
2014-02-21 21:48:08 +00:00
$(common-objpfx)malloc/mtrace $(objpfx)bug-ga2.mtrace > $@; \
$(evaluate-test)
bug-ga2-ENV = MALLOC_TRACE=$(objpfx)bug-ga2.mtrace
bug-glob2-ENV = MALLOC_TRACE=$(objpfx)bug-glob2.mtrace
Make tests consistently use *.out output files. This patch systematically renames miscellaneous tests so their outputs use a *.out name (unless the test is just running some glibc program with its conventional output file name, rather than a special program at all, as in catgets tests generating *.cat). In the case of the iconv test test-iconvconfig, output is redirected where it wasn't before. In various places the "generated" variable is updated to reflect the revised test names; in iconvdata/Makefile a typo (mmtrace-tst-loading) is also fixed. resolv/Makefile sets both "generate" (which appears unused) and "generated". Bitrot in the settings of these variables could no doubt be fixed so that "make clean" after build and testing leaves results the same as after configure (and indeed the tests-special / xtests-special variables could be used to simplify things, by removing those files automatically rather than listing them manually in these variables), and "make distclean" leaves an empty build directory, but right now it appears various files don't get deleted. I think they are liable to continue to bitrot in the absence of routine testing that these targets actually work, given that building in the source directory isn't supported and that was the main use of such makefile targets. Tested x86_64. * elf/Makefile (tests-special): Rename tests to end with .out. ($(objpfx)noload-mem): Likewise. ($(objpfx)tst-leaks1-mem): Likewise. ($(objpfx)tst-leaks1-static-mem.out): Likewise. * iconv/Makefile (xtests-special): Change test-iconvconfig to $(objpfx)test-iconvconfig.out. (test-iconvconfig): Change to $(objpfx)test-iconvconfig.out. Use set -e inside subshell and redirect output to file. * iconvdata/Makefile (generated): Rename tests to end with .out. Correct type. (tests-special): Rename tests to end with .out. ($(objpfx)mtrace-tst-loading): Likewise. * intl/Makefile (generated): Likewise. (tests-special): Likewise. ($(objpfx)mtrace-tst-gettext): Likewise. * misc/Makefile (generated): Likewise. (tests-special): Likewise. ($(objpfx)tst-error1-mem): Likewise. * nptl/Makefile (tests-special): Likewise. ($(objpfx)tst-stack3-mem): Likewise. (generated): Likewise. * posix/Makefile (generated): Likewise. (tests-special): Likewise. (xtests-special): Likewise. ($(objpfx)tst-fnmatch-mem): Likewise. ($(objpfx)bug-regex2-mem): Likewise. ($(objpfx)bug-regex14-mem): Likewise. ($(objpfx)bug-regex21-mem): Likewise. ($(objpfx)bug-regex31-mem): Likewise. ($(objpfx)tst-vfork3-mem): Likewise. ($(objpfx)tst-rxspencer-no-utf8-mem): Likewise. ($(objpfx)tst-pcre-mem): Likewise. ($(objpfx)tst-boost-mem): Likewise. ($(objpfx)bug-ga2-mem): Likewise. ($(objpfx)bug-glob2-mem): Likewise. * resolv/Makefile (generate): Likewise. (tests-special): Likewise. (xtests-special): Likewise. (generated): Likewise. ($(objpfx)mtrace-tst-leaks): Likewise. ($(objpfx)mtrace-tst-leaks2): Likewise. localedata: * Makefile (generated): Rename tests to end with .out. (tests-special): Likewise. ($(objpfx)mtrace-tst-leaks): Likewise.
2014-03-07 03:29:23 +00:00
$(objpfx)bug-glob2-mem.out: $(objpfx)bug-glob2.out
Generate .test-result files for tests with special rules. This patch, an updated version of <https://sourceware.org/ml/libc-alpha/2014-01/msg00194.html> now proposed for inclusion in glibc, extends the generation of PASS and FAIL status in .test-result files for individual tests to cover tests with their own custom makefile rules. This is just adding $(evaluate-test) calls to all such rules, since tests with multiple commands were previously split into separate tests. Note that the tests the makefiles expect to fail (posix/annexc and conformtest) currently get FAIL listed in the .test-result file, rather than XFAIL; a subsequent patch will introduce a better XFAIL mechanism. Tested x86_64. * Makefile ($(objpfx)c++-types-check.out): Use $(evaluate-test). ($(objpfx)check-local-headers.out): Likewise. ($(objpfx)begin-end-check.out): Likewise. * Makerules (check-abi-%.out): Likewise. * catgets/Makefile ($(objpfx)test1.cat): Likewise. ($(objpfx)test2.cat): Likewise. ($(objpfx)de/libc.cat): Likewise. ($(objpfx)test-gencat.out): Likewise. * conform/Makefile ($(objpfx)run-conformtest.out): Likewise. * elf/Makefile ($(objpfx)order-cmp.out): Likewise. ($(objpfx)noload-mem): Likewise. ($(objpfx)tst-pathopt.out): Likewise. ($(objpfx)tst-rtld-load-self.out): Likewise. ($(objpfx)tst-array1-cmp.out): Likewise. ($(objpfx)tst-array1-static-cmp.out): Likewise. ($(objpfx)tst-array2-cmp.out): Likewise. ($(objpfx)tst-array3-cmp.out): Likewise. ($(objpfx)tst-array4-cmp.out): Likewise. ($(objpfx)tst-array5-cmp.out): Likewise. ($(objpfx)tst-array5-static-cmp.out): Likewise. ($(objpfx)check-textrel.out): Likewise. ($(objpfx)check-execstack.out): Likewise. ($(objpfx)check-localplt.out): Likewise. ($(objpfx)order2-cmp.out): Likewise. ($(objpfx)tst-leaks1-mem): Likewise. ($(objpfx)tst-leaks1-static-mem): Likewise. ($(objpfx)tst-initorder-cmp.out): Likewise. ($(objpfx)tst-initorder2-cmp.out): Likewise. ($(objpfx)tst-unused-dep.out): Likewise. ($(objpfx)tst-unused-dep-cmp.out): Likewise. * grp/Makefile ($(objpfx)tst_fgetgrent.out): Likewise. * iconv/Makefile (test-iconvconfig): Likewise. * iconvdata/Makefile ($(objpfx)mtrace-tst-loading): Likewise. ($(objpfx)iconv-test.out): Likewise. ($(objpfx)tst-tables.out): Likewise. * intl/Makefile ($(objpfx)mtrace-tst-gettext): Likewise. ($(objpfx)tst-gettext.out): Likewise. ($(objpfx)tst-translit.out): Likewise. ($(objpfx)tst-gettext2.out): Likewise. ($(objpfx)tst-gettext4.out): Likewise. ($(objpfx)tst-gettext6.out): Likewise. * io/Makefile ($(objpfx)ftwtest.out): Likewise. * libio/Makefile ($(objpfx)test-freopen.out): Likewise. ($(objpfx)tst-fopenloc-cmp.out): Likewise. ($(objpfx)tst-fopenloc-mem.out): Likewise. * malloc/Makefile ($(objpfx)tst-mtrace.out): Likewise. * misc/Makefile ($(objpfx)tst-error1-mem): Likewise. * posix/Makefile ($(objpfx)globtest.out): Likewise. ($(objpfx)wordexp-tst.out): Likewise. ($(objpfx)annexc.out): Likewise. ($(objpfx)tst-fnmatch-mem): Likewise. ($(objpfx)bug-regex2-mem): Likewise. ($(objpfx)bug-regex14-mem): Likewise. ($(objpfx)bug-regex21-mem): Likewise. ($(objpfx)bug-regex31-mem): Likewise. ($(objpfx)tst-vfork3-mem): Likewise. ($(objpfx)tst-rxspencer-no-utf8-mem): Likewise. ($(objpfx)tst-pcre-mem): Likewise. ($(objpfx)tst-boost-mem): Likewise. ($(objpfx)tst-getconf.out): Likewise. ($(objpfx)bug-ga2-mem): Likewise. ($(objpfx)bug-glob2-mem): Likewise. * resolv/Makefile ($(objpfx)mtrace-tst-leaks): Likewise. ($(objpfx)mtrace-tst-leaks2): Likewise. * stdio-common/Makefile ($(objpfx)tst-unbputc.out): Likewise. ($(objpfx)tst-printf.out): Likewise. ($(objpfx)tst-setvbuf1.out): Likewise. ($(objpfx)tst-setvbuf1-cmp.out): Likewise. * stdlib/Makefile ($(objpfx)isomac.out): Likewise. ($(objpfx)tst-fmtmsg.out): Likewise. * string/Makefile ($(objpfx)tst-svc-cmp.out): Likewise. * sysdeps/x86/Makefile ($(objpfx)tst-xmmymm.out): Likewise. localedata: * Makefile ($(objpfx)sort-test.out): Use $(evaluate-test). ($(objpfx)tst-fmon.out): Likewise. ($(objpfx)tst-numeric.out): Likewise. ($(objpfx)tst-locale.out): Likewise. ($(objpfx)tst-rpmatch.out): Likewise. ($(objpfx)tst-trans.out): Likewise. ($(objpfx)tst-mbswcs.out): Likewise. ($(objpfx)tst-ctype.out): Likewise. ($(objpfx)tst-wctype.out): Likewise. ($(objpfx)tst-langinfo.out): Likewise. ($(objpfx)mtrace-tst-leaks): Likewise. nptl: * Makefile ($(objpfx)tst-stack3-mem): Use $(evaluate-test). ($(objpfx)tst-tls6.out): Likewise. ($(objpfx)tst-cleanup0.out): Likewise. ($(objpfx)tst-cleanup0-cmp.out): Likewise. ($(objpfx)tst-cancel-wrappers.out): Likewise. ($(objpfx)tst-oddstacklimit.out): Likewise. nptl_db: * Makefile ($(objpfx)db-symbols.out): Use $(evaluate-test).
2014-02-21 21:48:08 +00:00
$(common-objpfx)malloc/mtrace $(objpfx)bug-glob2.mtrace > $@; \
$(evaluate-test)
$(inst_libexecdir)/getconf: $(inst_bindir)/getconf \
$(objpfx)getconf.speclist FORCE
$(addprefix $(..)./scripts/mkinstalldirs ,\
$(filter-out $(wildcard $@),$@))
while read spec; do \
ln -f $< $@/$$spec.new || $(INSTALL_PROGRAM) $< $@/$$spec.new; \
mv -f $@/$$spec.new $@/$$spec; \
done < $(objpfx)getconf.speclist
$(objpfx)getconf.speclist: getconf-speclist.c posix-envs.def
$(compile.c) -E -o - \
| sed -n -e '/@@@PRESENT_/s/@@@PRESENT_//p' > $@.new
mv -f $@.new $@
# This file is only actually needed at install time. But forcing it to
# be built both makes it available for eyeball inspection and avoids the
# surprise of things that look like compilation being done by 'make install'.
others: $(objpfx)getconf.speclist
$(objpfx)posix-conf-vars-def.h: $(..)scripts/gen-posix-conf-vars.awk \
posix-conf-vars.list Makefile
$(make-target-directory)
$(AWK) -f $(filter-out Makefile, $^) > $@.tmp
mv -f $@.tmp $@