glibc/stdio/internals.c

676 lines
18 KiB
C
Raw Normal View History

1995-02-18 01:27:10 +00:00
/* Copyright (C) 1991, 1992, 1993, 1994, 1995 Free Software Foundation, Inc.
This file is part of the GNU C Library.
The GNU C Library is free software; you can redistribute it and/or
modify it under the terms of the GNU Library General Public License as
published by the Free Software Foundation; either version 2 of the
License, or (at your option) any later version.
The GNU C Library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
Library General Public License for more details.
You should have received a copy of the GNU Library General Public
License along with the GNU C Library; see the file COPYING.LIB. If
not, write to the Free Software Foundation, Inc., 675 Mass Ave,
Cambridge, MA 02139, USA. */
#include <ansidecl.h>
#include <errno.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
/* Make sure that FP has its functions set. */
void
DEFUN(__stdio_check_funcs, (fp), register FILE *fp)
{
if (!fp->__seen)
{
/* Initialize the stream's info, including buffering info.
This may give a buffer, change I/O functions, etc.
If no buffer is set (and the stream is not made explicitly
unbuffered), we allocate a buffer below, using the bufsize
set by this function. */
extern void EXFUN(__stdio_init_stream, (FILE *));
fp->__room_funcs = __default_room_functions;
fp->__io_funcs = __default_io_functions;
__stdio_init_stream (fp);
fp->__seen = 1;
}
}
/* Minimum size of a buffer we will allocate by default.
If this much memory is not available,
the stream in question will be made unbuffered instead. */
#define MIN_BUFSIZE 128
/* Figure out what kind of buffering (none, line, or full)
and what buffer size to give FP. */
static void
DEFUN(init_stream, (fp), register FILE *fp)
{
__stdio_check_funcs (fp);
if (fp->__buffer == NULL && !fp->__userbuf)
{
int save;
if (fp->__bufsize == 0)
fp->__bufsize = BUFSIZ;
/* Try to get however many bytes of buffering __stdio_pickbuf
specified, but if that much memory isn't available,
try half as much each time until it succeeds or the buffer
size becomes too small to be useful. */
save = errno;
while (fp->__bufsize >= MIN_BUFSIZE)
{
fp->__buffer = (char *) malloc(fp->__bufsize);
if (fp->__buffer == NULL)
fp->__bufsize /= 2;
else
break;
}
errno = save;
if (fp->__buffer == NULL)
{
/* We can't get space for the buffer, so make it unbuffered. */
fp->__userbuf = 1;
fp->__bufsize = 0;
}
}
if (fp->__bufp == NULL)
{
/* Set the buffer pointer to the beginning of the buffer. */
fp->__bufp = fp->__buffer;
fp->__put_limit = fp->__get_limit = fp->__buffer;
}
}
/* Determine the current file position of STREAM if it is unknown. */
int
DEFUN(__stdio_check_offset, (stream), FILE *stream)
{
init_stream (stream);
if (stream->__offset == (fpos_t) -1)
{
/* This stream's offset is unknown or unknowable. */
if (stream->__io_funcs.__seek == NULL)
{
/* Unknowable. */
errno = ESPIPE;
return EOF;
}
else
{
/* Unknown. Find it out. */
fpos_t pos = (fpos_t) 0;
if ((*stream->__io_funcs.__seek)(stream->__cookie,
&pos, SEEK_CUR) < 0)
{
if (errno == ESPIPE)
/* Object is incapable of seeking. */
stream->__io_funcs.__seek = NULL;
return EOF;
}
stream->__offset = pos;
}
}
if (stream->__target == (fpos_t) -1)
/* This stream was opened on an existing object with
an unknown file position. The position is now known.
Make this the target position. */
stream->__target = stream->__offset;
return 0;
}
/* Move FP's file position to its target file position,
seeking as necessary and updating its `offset' field.
Sets ferror(FP) (and possibly errno) for errors. */
static void
DEFUN(seek_to_target, (fp), FILE *fp)
{
int save = errno;
if (__stdio_check_offset (fp) == EOF)
{
if (errno == ESPIPE)
errno = save;
else
fp->__error = 1;
}
else if (fp->__target != fp->__offset)
{
/* We are not at the target file position.
Seek to that position. */
if (fp->__io_funcs.__seek == NULL)
{
/* We can't seek! */
errno = ESPIPE;
fp->__error = 1;
}
else
{
fpos_t pos = fp->__target;
if ((*fp->__io_funcs.__seek)(fp->__cookie, &pos, SEEK_SET) < 0)
/* Seek failed! */
fp->__error = 1;
else
{
fp->__offset = pos;
if (pos != fp->__target)
/* Seek didn't go to the right place! */
fp->__error = 1;
}
}
}
}
/* Flush the buffer for FP.
If C is not EOF, it is also to be written.
If the stream is line buffered and C is a newline, it is written
to the output, otherwise it is put in the buffer after it has been
flushed to avoid a system call for a single character.
This is the default `output room' function. */
static void
DEFUN(flushbuf, (fp, c),
register FILE *fp AND int c)
{
int flush_only = c == EOF;
size_t buffer_written;
size_t to_write;
/* Set if target and get_limit have already been twiddled appropriately. */
int twiddled = 0;
if (fp->__put_limit == fp->__buffer)
{
/* The stream needs to be primed for writing. */
size_t buffer_offset = 0;
if (fp->__target == -1)
/* For an unseekable object, data recently read bears no relation
to data we will write later. Discard the buffer. */
fp->__get_limit = fp->__buffer;
else
/* If the user has read some of the buffer, the target position
is incremented for each character he has read. */
fp->__target += fp->__bufp - fp->__buffer;
1995-02-18 01:27:10 +00:00
if (fp->__mode.__read && fp->__room_funcs.__input != NULL &&
!fp->__mode.__append)
{
int save = errno;
CONST int aligned = (fp->__buffer == NULL ||
__stdio_check_offset(fp) == EOF ||
fp->__target % fp->__bufsize == 0);
errno = save;
if (!aligned)
{
/* Move to a block (buffer size) boundary and read in a block.
Then the output will be written as a whole block, too. */
CONST size_t o = fp->__target % fp->__bufsize;
fp->__target -= o;
if ((*fp->__room_funcs.__input)(fp) == EOF && ferror(fp))
return;
else
__clearerr(fp);
if (fp->__get_limit - fp->__buffer < o)
/* Oops. We didn't read enough (probably because we got EOF).
Forget we even mentioned it. */
fp->__target += o;
else
/* Start bufp as far into the buffer as we were into
this block before we read it. */
buffer_offset = o;
/* The target position is now set to where the beginning of the
buffer maps to; and the get_limit was set by the input-room
function. */
twiddled = 1;
}
1995-02-18 01:27:10 +00:00
}
if (fp->__buffer != NULL)
{
/* Set up to write output into the buffer. */
fp->__put_limit = fp->__buffer + fp->__bufsize;
fp->__bufp = fp->__buffer + buffer_offset;
if (!flush_only)
{
/* Put C in the buffer to be written out.
We only need to actually write it out now if
it is a newline on a line-buffered stream. */
*fp->__bufp++ = (unsigned char) c;
if (!fp->__linebuf || (unsigned char) c != '\n')
{
/* There is no need to flush C from the buffer right now.
Record that nothing was written from the buffer,
and go do clean-up at end. */
buffer_written = 0;
goto end;
}
else
/* We put C in the buffer, so don't write it again later. */
flush_only = 1;
}
}
Thu Mar 16 00:04:41 1995 Roland McGrath <roland@churchy.gnu.ai.mit.edu> * locale/C-ctype.c: New correct data generated by drepper. * Rules: Don't use $(libc.a). Parsing of grouped numbers contributed by Ulrich Drepper. * stdlib/strtol.c (__strtol_internal): Renamed from strtol. Take new flag arg; if nonzero, parse locale-dependent thousands grouping and interpret only the prefix that is correctly grouped. (strtol): Define this to call _strtol_internal with zero for the flag. Use a weak symbol for the definition. * stdlib/strtod.c (strtod, __strtod_internal): Likewise. Check for the exponent of the number overflowing the float format. * stdlib/stdlib.h (__strtof, __strtold): Declarations removed. (__strto{f,d,ld,l,ul,q,uq}_internal): Declare these functions. [__OPTIMIZE__]: Define inline functions calling those. * stdlib/grouping.h: New file, written by drepper. * stdlib/Makefile (distribute): Add grouping.h. * stdio/vfscanf.c: Grok %' modifier to numeric conversions. Call __strtoX_internal with the grouping flag set iff the modifier is present. Wed Mar 15 00:40:54 1995 Roland McGrath <roland@churchy.gnu.ai.mit.edu> * sysdeps/generic/memchr.c: Fix typos: limit.h -> limits.h. * mach/Machrules: Produce static deps for all object flavors. [interface-library]: Remove all these variables and rules. ($(interface-library)-routines): Define this variable. (extra-libs): Append $(interface-library) to this. * mach/Makefile (interface-library): Omit .a suffix. * hurd/Makefile: Likewise. Tue Mar 14 23:40:31 1995 Roland McGrath <roland@churchy.gnu.ai.mit.edu> * stdio/internals.c (flushbuf): If !FLUSH_ONLY, don't skip out early if no new data in buffer after priming. * Makerules (object-suffixes, libtypes): Move all these variables to Makeconfig. * Makeconfig (object-suffixes, libtypes): Moved here from Makerules. * Makerules (build-extra-lib): New canned sequence. * sysdeps/mach/hurd/euidaccess.c: Include fcntl.h. Declare ERR; fix uses of FILE and PORT. Remove bogus weak alias for `access'. * sysdeps/mach/hurd/dirfd.c: Include hurd/fd.h and errno.h. Add missing semicolon. * sysdeps/mach/hurd/opendir.c: Include hurd/fd.h. Use a `struct hurd_fd *' temp var, since DIRP->__fd is a `void *'. * sysdeps/mach/hurd/readdir.c: Include hurd/fd.h. * stdlib/wcstombs.c: #if 0 out code for non-ASCII chars until the locale data format is implemented. * sysdeps/mach/hurd/i386/trampoline.c (_hurd_setup_sighandler): Pass &__sigreturn on the stack to the trampoline code, so it is not position-dependent. * stdio/printf_fp.c (NDEBUG): Define this to disable assert. Don't include <stdarg.h>. (__printf_fp): Last arg ARGS is now `const void **const'; dereference ARGS[0] instead of using va_arg. * locale/setlocale.c: In LC_ALL case, initialize CATEGORY before loop to install data. * locale/loadlocale.c (_nl_category_num_items): Use _NL_ITEM_INDEX to extract number from item code. (_nl_load_locale): Close the descriptor when finished. * malloc/realloc.c (_realloc_internal): Call _malloc_internal in place of malloc. * time/tzfile.c (__tzfile_default): Initialize RULE_STDOFF to zero.
1995-03-16 05:32:45 +00:00
if (fp->__bufp - fp->__buffer <= buffer_offset && flush_only)
1995-02-18 01:27:10 +00:00
{
/* There is nothing new in the buffer, only data that
was read back aligned from the file. */
buffer_written = 0;
goto end;
}
}
/* If there is read data in the buffer past what was written,
write all of that as well. Otherwise, just write what has been
written into the buffer. */
buffer_written = fp->__bufp - fp->__buffer;
to_write = (buffer_written == 0 ? 0 :
fp->__get_limit > fp->__bufp ?
fp->__get_limit - fp->__buffer :
buffer_written);
if (fp->__io_funcs.__write == NULL || (to_write == 0 && flush_only))
{
/* There is no writing function or we're coming from an fflush
call with nothing in the buffer, so just say the buffer's
been flushed, increment the file offset, and return. */
fp->__bufp = fp->__buffer;
if (fp->__offset != -1)
fp->__offset += to_write;
1995-02-18 01:27:10 +00:00
goto end;
}
if (to_write > 0)
{
int wrote;
/* Go to the target file position. Don't bother if appending;
the write will just ignore the file position anyway. */
if (!fp->__mode.__append)
seek_to_target (fp);
if (!ferror(fp))
{
/* Write out the buffered data. */
wrote = (*fp->__io_funcs.__write)(fp->__cookie, fp->__buffer,
to_write);
if (wrote > 0)
{
if (fp->__mode.__append)
/* The write has written the data to the end of the file
and updated the file position to after the data. Don't
bother to find the current position; we can get it
later if we need it. */
fp->__offset = fp->__target = -1;
else if (fp->__offset != -1)
1995-02-18 01:27:10 +00:00
/* Record that we've moved forward in the file. */
fp->__offset += wrote;
}
if (wrote < (int) to_write)
/* The writing function should always write
the whole buffer unless there is an error. */
fp->__error = 1;
}
}
/* Reset the buffer pointer to the beginning of the buffer. */
fp->__bufp = fp->__buffer;
/* If we're not just flushing, write the last character, C. */
if (!flush_only && !ferror(fp))
{
if (fp->__buffer == NULL || (fp->__linebuf && (unsigned char) c == '\n'))
{
/* Either we're unbuffered, or we're line-buffered and
C is a newline, so really write it out immediately. */
char cc = (unsigned char) c;
if ((*fp->__io_funcs.__write)(fp->__cookie, &cc, 1) < 1)
fp->__error = 1;
else if (fp->__offset != -1)
1995-02-18 01:27:10 +00:00
{
/* Record that we've moved forward in the file. */
++fp->__offset;
++fp->__target;
}
}
else
/* Just put C in the buffer. */
*fp->__bufp++ = (unsigned char) c;
}
end:
if (!twiddled)
{
if (fp->__target != -1)
/* The new target position moves up as
much as the user wrote into the buffer. */
fp->__target += buffer_written;
1995-02-18 01:27:10 +00:00
/* Set the reading limit to the beginning of the buffer,
so the next `getc' will call __fillbf. */
fp->__get_limit = fp->__buffer;
}
if (feof(fp) || ferror(fp))
fp->__bufp = fp->__put_limit;
}
/* Fill the buffer for FP and return the first character read (or EOF).
This is the default `input_room' function. */
static int
DEFUN(fillbuf, (fp), register FILE *fp)
{
/* How far into the buffer we read we want to start bufp. */
size_t buffer_offset = 0;
register char *buffer;
register size_t to_read, nread = 0;
/* This must be unsigned to avoid sign extension in return. */
unsigned char c;
if (fp->__io_funcs.__read == NULL)
{
/* There is no read function, so always return EOF. */
fp->__eof = 1;
goto end;
}
if (fp->__buffer == NULL)
{
/* We're unbuffered, so we want to read only one character. */
buffer = (char *) &c;
to_read = 1;
}
else
{
/* We're buffered, so try to fill the buffer. */
buffer = fp->__buffer;
to_read = fp->__bufsize;
}
/* We're reading, so we're not at the end-of-file. */
fp->__eof = 0;
/* Go to the target file position. */
{
int save = errno;
if (__stdio_check_offset (fp) == 0 && fp->__target != fp->__offset)
{
/* Move to a block (buffer size) boundary. */
if (fp->__bufsize != 0)
{
buffer_offset = fp->__target % fp->__bufsize;
fp->__target -= buffer_offset;
}
seek_to_target (fp);
}
errno = save;
}
while (!ferror(fp) && !feof(fp) && nread <= buffer_offset)
{
/* Try to fill the buffer. */
int count = (*fp->__io_funcs.__read)(fp->__cookie, buffer, to_read);
if (count == 0)
fp->__eof = 1;
else if (count < 0)
fp->__error = 1;
else
{
buffer += count;
nread += count;
to_read -= count;
if (fp->__offset != -1)
/* Record that we've moved forward in the file. */
fp->__offset += count;
1995-02-18 01:27:10 +00:00
}
}
if (fp->__buffer == NULL)
/* There is no buffer, so return the character we read
without all the buffer pointer diddling. */
return (feof(fp) || ferror(fp)) ? EOF : c;
/* Reset the buffer pointer to the beginning of the buffer
(plus whatever offset we may have set above). */
fp->__bufp = fp->__buffer + buffer_offset;
end:;
if (feof(fp) || ferror(fp))
{
/* Set both end pointers to the beginning of the buffer so
the next i/o call will force a call to __fillbf/__flshfp. */
fp->__put_limit = fp->__get_limit = fp->__buffer;
return EOF;
}
/* Set the end pointer to one past the last character we read. */
fp->__get_limit = fp->__buffer + nread;
/* Make it so the next `putc' will call __flshfp. */
fp->__put_limit = fp->__buffer;
/* Return the first character in the buffer. */
return *((unsigned char *) (fp->__bufp++));
}
/* Default I/O and room functions. */
extern __io_read_fn __stdio_read;
extern __io_write_fn __stdio_write;
extern __io_seek_fn __stdio_seek;
extern __io_close_fn __stdio_close;
extern __io_fileno_fn __stdio_fileno;
CONST __io_functions __default_io_functions =
{
__stdio_read, __stdio_write, __stdio_seek, __stdio_close, __stdio_fileno
};
CONST __room_functions __default_room_functions =
{
fillbuf, flushbuf
};
/* Flush the buffer for FP and also write C if FLUSH_ONLY is nonzero.
This is the function used by putc and fflush. */
int
DEFUN(__flshfp, (fp, c),
register FILE *fp AND int c)
{
int flush_only = c == EOF;
if (!__validfp(fp) || !fp->__mode.__write)
{
errno = EINVAL;
return EOF;
}
if (ferror(fp))
return EOF;
if (fp->__pushed_back)
{
/* Discard the char pushed back by ungetc. */
fp->__bufp = fp->__pushback_bufp;
fp->__pushed_back = 0;
}
/* Make sure the stream is initialized (has functions and buffering). */
init_stream(fp);
/* Do this early, so a `putc' on such a stream will never return success. */
if (fp->__room_funcs.__output == NULL)
{
/* A NULL `output room' function means
to always return an output error. */
fp->__error = 1;
return EOF;
}
if (!flush_only &&
/* Will C fit into the buffer?
See below about linebuf_active. */
fp->__bufp < (fp->__linebuf_active ? fp->__buffer + fp->__bufsize :
fp->__put_limit))
{
/* The character will fit in the buffer, so put it there. */
*fp->__bufp++ = (unsigned char) c;
if (fp->__linebuf && (unsigned char) c == '\n')
flush_only = 1;
else
return (unsigned char) c;
}
if (fp->__linebuf_active)
/* This is an active line-buffered stream, so its put-limit is set
to the beginning of the buffer in order to force a __flshfp call
on each putc (see below). We undo this hack here (by setting
the limit to the end of the buffer) to simplify the interface
with the output-room function. */
fp->__put_limit = fp->__buffer + fp->__bufsize;
/* Make room in the buffer. */
(*fp->__room_funcs.__output) (fp, flush_only ? EOF : (unsigned char) c);
if (fp->__linebuf)
{
/* This is a line-buffered stream, and it is now ready to do
some output. We call this an "active line-buffered stream".
We set the put_limit to the beginning of the buffer,
so the next `putc' call will force a call to this function.
Setting the linebuf_active flag tells the code above
(on the next call) to undo this hackery. */
fp->__put_limit = fp->__buffer;
fp->__linebuf_active = 1;
}
if (ferror (fp))
return EOF;
if (flush_only)
return 0;
return (unsigned char) c;
}
/* Fill the buffer for FP and return the first character read.
This is the function used by getc. */
int
DEFUN(__fillbf, (fp), register FILE *fp)
{
register int c;
fpos_t new_target;
if (!__validfp(fp) || !fp->__mode.__read)
{
errno = EINVAL;
return EOF;
}
if (fp->__pushed_back)
{
/* Return the char pushed back by ungetc. */
fp->__bufp = fp->__pushback_bufp;
fp->__pushed_back = 0;
return fp->__pushback;
}
/* Make sure the stream is initialized (has functions and buffering). */
init_stream(fp);
/* If we're trying to read the first character of a new
line of input from an unbuffered or line buffered stream,
we must flush all line-buffered output streams. */
if (fp->__buffer == NULL || fp->__linebuf)
{
register FILE *f;
for (f = __stdio_head; f != NULL; f = f->__next)
if (__validfp (f) && f->__linebuf && f->__mode.__write)
(void) __flshfp (f, EOF);
}
/* Note we must do this after flushing all line-buffered
streams, or else __flshfp would undo it! */
if (fp->__linebuf_active)
{
/* This is an active line-buffered stream, meaning it is in the midst
of writing, but has a bogus put_limit. Restore it to normality. */
fp->__put_limit = fp->__buffer + fp->__bufsize;
fp->__linebuf_active = 0;
}
/* We want the beginning of the buffer to now
map to just past the last data we read. */
new_target = fp->__target + (fp->__get_limit - fp->__buffer);
if (fp->__put_limit > fp->__buffer)
{
/* There is written data in the buffer.
Flush it out. */
if (fp->__room_funcs.__output == NULL)
fp->__error = 1;
else
(*fp->__room_funcs.__output) (fp, EOF);
}
fp->__target = new_target;
if (ferror(fp))
c = EOF;
else if (fp->__room_funcs.__input != NULL)
{
c = (*fp->__room_funcs.__input)(fp);
if (fp->__buffer == NULL)
/* This is an unbuffered stream, so the target sync above
won't do anything the next time around. Instead, note that
we have read one character. The (nonexistent) buffer now
maps to the position just past that character. */
++fp->__target;
}
else
{
/* A NULL `input_room' function means always return EOF. */
fp->__eof = 1;
c = EOF;
}
return c;
}
/* Nuke a stream, but don't kill its link in the chain. */
void
DEFUN(__invalidate, (stream), register FILE *stream)
{
/* Save its link. */
register FILE *next = stream->__next;
/* Pulverize the fucker. */
memset((PTR) stream, 0, sizeof(FILE));
/* Restore the deceased's link. */
stream->__next = next;
}