aarch64: Optimized memset for falkor
The generic memset reads dczid_el0 on every memset. This has a
significant impact on falkor for a range of sizes because reading
dczid_el0 is slow.
The DZP bit in the dczid_el0 register does not change dynamically, so
it is safe to read once during program startup. With this patch
dczid_el0 is read once during startup and zva_size is cached. This is
used to invoke the falkor-specific memset; the generic memset routine
remains unchanged.
The gains due to this are significant for falkor, with run time
reductions as high as 48%. Here's a sample from the falkor tests:
Function: memset
Variant: walk
simple_memset __memset_falkor __memset_generic
=====================================================================
length=256, char=0: 139.96 (-698.28%) 9.07 ( 48.26%) 17.53
length=257, char=0: 140.50 (-699.03%) 9.53 ( 45.80%) 17.58
length=258, char=0: 140.96 (-703.95%) 9.58 ( 45.36%) 17.53
length=259, char=0: 141.56 (-705.16%) 9.53 ( 45.79%) 17.58
length=260, char=0: 142.15 (-710.76%) 9.57 ( 45.39%) 17.53
length=261, char=0: 142.50 (-710.39%) 9.53 ( 45.78%) 17.58
length=262, char=0: 142.97 (-715.09%) 9.57 ( 45.42%) 17.54
length=263, char=0: 143.51 (-716.18%) 9.53 ( 45.80%) 17.58
length=264, char=0: 143.93 (-720.55%) 9.58 ( 45.39%) 17.54
length=265, char=0: 144.56 (-722.07%) 9.53 ( 45.80%) 17.59
length=266, char=0: 144.98 (-726.42%) 9.58 ( 45.42%) 17.54
length=267, char=0: 145.53 (-727.53%) 9.53 ( 45.80%) 17.59
length=268, char=0: 146.25 (-731.81%) 9.53 ( 45.79%) 17.58
length=269, char=0: 146.52 (-735.39%) 9.53 ( 45.66%) 17.54
length=270, char=0: 146.97 (-735.81%) 9.53 ( 45.80%) 17.58
length=271, char=0: 147.54 (-741.08%) 9.58 ( 45.38%) 17.54
length=512, char=0: 268.26 (-1307.85%) 12.06 ( 36.71%) 19.05
length=513, char=0: 268.73 (-1273.89%) 13.56 ( 30.68%) 19.56
length=514, char=0: 269.31 (-1276.89%) 13.56 ( 30.68%) 19.56
length=515, char=0: 269.73 (-1279.05%) 13.56 ( 30.68%) 19.56
length=516, char=0: 270.34 (-1282.24%) 13.56 ( 30.67%) 19.56
length=517, char=0: 270.83 (-1284.71%) 13.56 ( 30.66%) 19.56
length=518, char=0: 271.20 (-1286.54%) 13.56 ( 30.67%) 19.56
length=519, char=0: 271.67 (-1288.67%) 13.65 ( 30.24%) 19.56
length=520, char=0: 272.14 (-1291.04%) 13.65 ( 30.22%) 19.56
length=521, char=0: 272.66 (-1293.69%) 13.65 ( 30.23%) 19.56
length=522, char=0: 273.14 (-1296.13%) 13.65 ( 30.20%) 19.56
length=523, char=0: 273.64 (-1298.75%) 13.65 ( 30.23%) 19.56
length=524, char=0: 274.34 (-1302.16%) 13.66 ( 30.20%) 19.57
length=525, char=0: 274.64 (-1297.78%) 13.56 ( 30.99%) 19.65
length=526, char=0: 275.20 (-1300.04%) 13.56 ( 31.01%) 19.66
length=527, char=0: 275.66 (-1302.86%) 13.56 ( 30.99%) 19.65
length=1024, char=0: 524.46 (-2169.75%) 20.12 ( 12.92%) 23.11
length=1025, char=0: 525.14 (-2124.63%) 21.62 ( 8.40%) 23.61
length=1026, char=0: 525.59 (-2125.36%) 21.88 ( 7.37%) 23.62
length=1027, char=0: 525.98 (-2127.14%) 21.62 ( 8.46%) 23.62
length=1028, char=0: 526.68 (-2131.10%) 21.62 ( 8.42%) 23.61
length=1029, char=0: 527.10 (-2131.70%) 21.79 ( 7.73%) 23.62
length=1030, char=0: 527.54 (-2118.51%) 21.62 ( 9.10%) 23.78
length=1031, char=0: 527.98 (-2136.37%) 21.62 ( 8.43%) 23.61
length=1032, char=0: 528.70 (-2139.38%) 21.62 ( 8.43%) 23.61
length=1033, char=0: 529.25 (-2124.37%) 21.62 ( 9.11%) 23.79
length=1034, char=0: 529.48 (-2142.95%) 21.62 ( 8.43%) 23.61
length=1035, char=0: 530.11 (-2145.13%) 21.62 ( 8.44%) 23.61
length=1036, char=0: 530.76 (-2147.10%) 21.79 ( 7.73%) 23.62
length=1037, char=0: 531.03 (-2149.45%) 21.62 ( 8.42%) 23.61
length=1038, char=0: 531.64 (-2151.87%) 21.62 ( 8.42%) 23.61
length=1039, char=0: 531.99 (-2151.63%) 21.80 ( 7.75%) 23.63
* sysdeps/aarch64/memset-reg.h: New file.
* sysdeps/aarch64/memset.S: Use it.
(__memset): Rename to MEMSET macro.
[ZVA_MACRO]: Use zva_macro.
* sysdeps/aarch64/multiarch/Makefile (sysdep_routines):
Add memset_generic and memset_falkor.
* sysdeps/aarch64/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Add memset ifuncs.
* sysdeps/aarch64/multiarch/init-arch.h (INIT_ARCH): New
local variable zva_size.
* sysdeps/aarch64/multiarch/memset.c: New file.
* sysdeps/aarch64/multiarch/memset_generic.S: New file.
* sysdeps/aarch64/multiarch/memset_falkor.S: New file.
* sysdeps/aarch64/multiarch/rtld-memset.S: New file.
* sysdeps/unix/sysv/linux/aarch64/cpu-features.c
(DCZID_DZP_MASK): New macro.
(DCZID_BS_MASK): Likewise.
(init_cpu_features): Read and set zva_size.
* sysdeps/unix/sysv/linux/aarch64/cpu-features.h
(struct cpu_features): New member zva_size.
2017-11-20 12:55:04 +00:00
|
|
|
/* Memset for falkor.
|
2020-01-01 00:14:33 +00:00
|
|
|
Copyright (C) 2017-2020 Free Software Foundation, Inc.
|
aarch64: Optimized memset for falkor
The generic memset reads dczid_el0 on every memset. This has a
significant impact on falkor for a range of sizes because reading
dczid_el0 is slow.
The DZP bit in the dczid_el0 register does not change dynamically, so
it is safe to read once during program startup. With this patch
dczid_el0 is read once during startup and zva_size is cached. This is
used to invoke the falkor-specific memset; the generic memset routine
remains unchanged.
The gains due to this are significant for falkor, with run time
reductions as high as 48%. Here's a sample from the falkor tests:
Function: memset
Variant: walk
simple_memset __memset_falkor __memset_generic
=====================================================================
length=256, char=0: 139.96 (-698.28%) 9.07 ( 48.26%) 17.53
length=257, char=0: 140.50 (-699.03%) 9.53 ( 45.80%) 17.58
length=258, char=0: 140.96 (-703.95%) 9.58 ( 45.36%) 17.53
length=259, char=0: 141.56 (-705.16%) 9.53 ( 45.79%) 17.58
length=260, char=0: 142.15 (-710.76%) 9.57 ( 45.39%) 17.53
length=261, char=0: 142.50 (-710.39%) 9.53 ( 45.78%) 17.58
length=262, char=0: 142.97 (-715.09%) 9.57 ( 45.42%) 17.54
length=263, char=0: 143.51 (-716.18%) 9.53 ( 45.80%) 17.58
length=264, char=0: 143.93 (-720.55%) 9.58 ( 45.39%) 17.54
length=265, char=0: 144.56 (-722.07%) 9.53 ( 45.80%) 17.59
length=266, char=0: 144.98 (-726.42%) 9.58 ( 45.42%) 17.54
length=267, char=0: 145.53 (-727.53%) 9.53 ( 45.80%) 17.59
length=268, char=0: 146.25 (-731.81%) 9.53 ( 45.79%) 17.58
length=269, char=0: 146.52 (-735.39%) 9.53 ( 45.66%) 17.54
length=270, char=0: 146.97 (-735.81%) 9.53 ( 45.80%) 17.58
length=271, char=0: 147.54 (-741.08%) 9.58 ( 45.38%) 17.54
length=512, char=0: 268.26 (-1307.85%) 12.06 ( 36.71%) 19.05
length=513, char=0: 268.73 (-1273.89%) 13.56 ( 30.68%) 19.56
length=514, char=0: 269.31 (-1276.89%) 13.56 ( 30.68%) 19.56
length=515, char=0: 269.73 (-1279.05%) 13.56 ( 30.68%) 19.56
length=516, char=0: 270.34 (-1282.24%) 13.56 ( 30.67%) 19.56
length=517, char=0: 270.83 (-1284.71%) 13.56 ( 30.66%) 19.56
length=518, char=0: 271.20 (-1286.54%) 13.56 ( 30.67%) 19.56
length=519, char=0: 271.67 (-1288.67%) 13.65 ( 30.24%) 19.56
length=520, char=0: 272.14 (-1291.04%) 13.65 ( 30.22%) 19.56
length=521, char=0: 272.66 (-1293.69%) 13.65 ( 30.23%) 19.56
length=522, char=0: 273.14 (-1296.13%) 13.65 ( 30.20%) 19.56
length=523, char=0: 273.64 (-1298.75%) 13.65 ( 30.23%) 19.56
length=524, char=0: 274.34 (-1302.16%) 13.66 ( 30.20%) 19.57
length=525, char=0: 274.64 (-1297.78%) 13.56 ( 30.99%) 19.65
length=526, char=0: 275.20 (-1300.04%) 13.56 ( 31.01%) 19.66
length=527, char=0: 275.66 (-1302.86%) 13.56 ( 30.99%) 19.65
length=1024, char=0: 524.46 (-2169.75%) 20.12 ( 12.92%) 23.11
length=1025, char=0: 525.14 (-2124.63%) 21.62 ( 8.40%) 23.61
length=1026, char=0: 525.59 (-2125.36%) 21.88 ( 7.37%) 23.62
length=1027, char=0: 525.98 (-2127.14%) 21.62 ( 8.46%) 23.62
length=1028, char=0: 526.68 (-2131.10%) 21.62 ( 8.42%) 23.61
length=1029, char=0: 527.10 (-2131.70%) 21.79 ( 7.73%) 23.62
length=1030, char=0: 527.54 (-2118.51%) 21.62 ( 9.10%) 23.78
length=1031, char=0: 527.98 (-2136.37%) 21.62 ( 8.43%) 23.61
length=1032, char=0: 528.70 (-2139.38%) 21.62 ( 8.43%) 23.61
length=1033, char=0: 529.25 (-2124.37%) 21.62 ( 9.11%) 23.79
length=1034, char=0: 529.48 (-2142.95%) 21.62 ( 8.43%) 23.61
length=1035, char=0: 530.11 (-2145.13%) 21.62 ( 8.44%) 23.61
length=1036, char=0: 530.76 (-2147.10%) 21.79 ( 7.73%) 23.62
length=1037, char=0: 531.03 (-2149.45%) 21.62 ( 8.42%) 23.61
length=1038, char=0: 531.64 (-2151.87%) 21.62 ( 8.42%) 23.61
length=1039, char=0: 531.99 (-2151.63%) 21.80 ( 7.75%) 23.63
* sysdeps/aarch64/memset-reg.h: New file.
* sysdeps/aarch64/memset.S: Use it.
(__memset): Rename to MEMSET macro.
[ZVA_MACRO]: Use zva_macro.
* sysdeps/aarch64/multiarch/Makefile (sysdep_routines):
Add memset_generic and memset_falkor.
* sysdeps/aarch64/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Add memset ifuncs.
* sysdeps/aarch64/multiarch/init-arch.h (INIT_ARCH): New
local variable zva_size.
* sysdeps/aarch64/multiarch/memset.c: New file.
* sysdeps/aarch64/multiarch/memset_generic.S: New file.
* sysdeps/aarch64/multiarch/memset_falkor.S: New file.
* sysdeps/aarch64/multiarch/rtld-memset.S: New file.
* sysdeps/unix/sysv/linux/aarch64/cpu-features.c
(DCZID_DZP_MASK): New macro.
(DCZID_BS_MASK): Likewise.
(init_cpu_features): Read and set zva_size.
* sysdeps/unix/sysv/linux/aarch64/cpu-features.h
(struct cpu_features): New member zva_size.
2017-11-20 12:55:04 +00:00
|
|
|
|
|
|
|
|
This file is part of the GNU C Library.
|
|
|
|
|
|
|
|
|
|
The GNU C Library is free software; you can redistribute it and/or
|
|
|
|
|
modify it under the terms of the GNU Lesser General Public
|
|
|
|
|
License as published by the Free Software Foundation; either
|
|
|
|
|
version 2.1 of the License, or (at your option) any later version.
|
|
|
|
|
|
|
|
|
|
The GNU C Library is distributed in the hope that it will be useful,
|
|
|
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
|
|
|
Lesser General Public License for more details.
|
|
|
|
|
|
|
|
|
|
You should have received a copy of the GNU Lesser General Public
|
|
|
|
|
License along with the GNU C Library. If not, see
|
Prefer https to http for gnu.org and fsf.org URLs
Also, change sources.redhat.com to sourceware.org.
This patch was automatically generated by running the following shell
script, which uses GNU sed, and which avoids modifying files imported
from upstream:
sed -ri '
s,(http|ftp)(://(.*\.)?(gnu|fsf|sourceware)\.org($|[^.]|\.[^a-z])),https\2,g
s,(http|ftp)(://(.*\.)?)sources\.redhat\.com($|[^.]|\.[^a-z]),https\2sourceware.org\4,g
' \
$(find $(git ls-files) -prune -type f \
! -name '*.po' \
! -name 'ChangeLog*' \
! -path COPYING ! -path COPYING.LIB \
! -path manual/fdl-1.3.texi ! -path manual/lgpl-2.1.texi \
! -path manual/texinfo.tex ! -path scripts/config.guess \
! -path scripts/config.sub ! -path scripts/install-sh \
! -path scripts/mkinstalldirs ! -path scripts/move-if-change \
! -path INSTALL ! -path locale/programs/charmap-kw.h \
! -path po/libc.pot ! -path sysdeps/gnu/errlist.c \
! '(' -name configure \
-execdir test -f configure.ac -o -f configure.in ';' ')' \
! '(' -name preconfigure \
-execdir test -f preconfigure.ac ';' ')' \
-print)
and then by running 'make dist-prepare' to regenerate files built
from the altered files, and then executing the following to cleanup:
chmod a+x sysdeps/unix/sysv/linux/riscv/configure
# Omit irrelevant whitespace and comment-only changes,
# perhaps from a slightly-different Autoconf version.
git checkout -f \
sysdeps/csky/configure \
sysdeps/hppa/configure \
sysdeps/riscv/configure \
sysdeps/unix/sysv/linux/csky/configure
# Omit changes that caused a pre-commit check to fail like this:
# remote: *** error: sysdeps/powerpc/powerpc64/ppc-mcount.S: trailing lines
git checkout -f \
sysdeps/powerpc/powerpc64/ppc-mcount.S \
sysdeps/unix/sysv/linux/s390/s390-64/syscall.S
# Omit change that caused a pre-commit check to fail like this:
# remote: *** error: sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S: last line does not end in newline
git checkout -f sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S
2019-09-07 05:40:42 +00:00
|
|
|
<https://www.gnu.org/licenses/>. */
|
aarch64: Optimized memset for falkor
The generic memset reads dczid_el0 on every memset. This has a
significant impact on falkor for a range of sizes because reading
dczid_el0 is slow.
The DZP bit in the dczid_el0 register does not change dynamically, so
it is safe to read once during program startup. With this patch
dczid_el0 is read once during startup and zva_size is cached. This is
used to invoke the falkor-specific memset; the generic memset routine
remains unchanged.
The gains due to this are significant for falkor, with run time
reductions as high as 48%. Here's a sample from the falkor tests:
Function: memset
Variant: walk
simple_memset __memset_falkor __memset_generic
=====================================================================
length=256, char=0: 139.96 (-698.28%) 9.07 ( 48.26%) 17.53
length=257, char=0: 140.50 (-699.03%) 9.53 ( 45.80%) 17.58
length=258, char=0: 140.96 (-703.95%) 9.58 ( 45.36%) 17.53
length=259, char=0: 141.56 (-705.16%) 9.53 ( 45.79%) 17.58
length=260, char=0: 142.15 (-710.76%) 9.57 ( 45.39%) 17.53
length=261, char=0: 142.50 (-710.39%) 9.53 ( 45.78%) 17.58
length=262, char=0: 142.97 (-715.09%) 9.57 ( 45.42%) 17.54
length=263, char=0: 143.51 (-716.18%) 9.53 ( 45.80%) 17.58
length=264, char=0: 143.93 (-720.55%) 9.58 ( 45.39%) 17.54
length=265, char=0: 144.56 (-722.07%) 9.53 ( 45.80%) 17.59
length=266, char=0: 144.98 (-726.42%) 9.58 ( 45.42%) 17.54
length=267, char=0: 145.53 (-727.53%) 9.53 ( 45.80%) 17.59
length=268, char=0: 146.25 (-731.81%) 9.53 ( 45.79%) 17.58
length=269, char=0: 146.52 (-735.39%) 9.53 ( 45.66%) 17.54
length=270, char=0: 146.97 (-735.81%) 9.53 ( 45.80%) 17.58
length=271, char=0: 147.54 (-741.08%) 9.58 ( 45.38%) 17.54
length=512, char=0: 268.26 (-1307.85%) 12.06 ( 36.71%) 19.05
length=513, char=0: 268.73 (-1273.89%) 13.56 ( 30.68%) 19.56
length=514, char=0: 269.31 (-1276.89%) 13.56 ( 30.68%) 19.56
length=515, char=0: 269.73 (-1279.05%) 13.56 ( 30.68%) 19.56
length=516, char=0: 270.34 (-1282.24%) 13.56 ( 30.67%) 19.56
length=517, char=0: 270.83 (-1284.71%) 13.56 ( 30.66%) 19.56
length=518, char=0: 271.20 (-1286.54%) 13.56 ( 30.67%) 19.56
length=519, char=0: 271.67 (-1288.67%) 13.65 ( 30.24%) 19.56
length=520, char=0: 272.14 (-1291.04%) 13.65 ( 30.22%) 19.56
length=521, char=0: 272.66 (-1293.69%) 13.65 ( 30.23%) 19.56
length=522, char=0: 273.14 (-1296.13%) 13.65 ( 30.20%) 19.56
length=523, char=0: 273.64 (-1298.75%) 13.65 ( 30.23%) 19.56
length=524, char=0: 274.34 (-1302.16%) 13.66 ( 30.20%) 19.57
length=525, char=0: 274.64 (-1297.78%) 13.56 ( 30.99%) 19.65
length=526, char=0: 275.20 (-1300.04%) 13.56 ( 31.01%) 19.66
length=527, char=0: 275.66 (-1302.86%) 13.56 ( 30.99%) 19.65
length=1024, char=0: 524.46 (-2169.75%) 20.12 ( 12.92%) 23.11
length=1025, char=0: 525.14 (-2124.63%) 21.62 ( 8.40%) 23.61
length=1026, char=0: 525.59 (-2125.36%) 21.88 ( 7.37%) 23.62
length=1027, char=0: 525.98 (-2127.14%) 21.62 ( 8.46%) 23.62
length=1028, char=0: 526.68 (-2131.10%) 21.62 ( 8.42%) 23.61
length=1029, char=0: 527.10 (-2131.70%) 21.79 ( 7.73%) 23.62
length=1030, char=0: 527.54 (-2118.51%) 21.62 ( 9.10%) 23.78
length=1031, char=0: 527.98 (-2136.37%) 21.62 ( 8.43%) 23.61
length=1032, char=0: 528.70 (-2139.38%) 21.62 ( 8.43%) 23.61
length=1033, char=0: 529.25 (-2124.37%) 21.62 ( 9.11%) 23.79
length=1034, char=0: 529.48 (-2142.95%) 21.62 ( 8.43%) 23.61
length=1035, char=0: 530.11 (-2145.13%) 21.62 ( 8.44%) 23.61
length=1036, char=0: 530.76 (-2147.10%) 21.79 ( 7.73%) 23.62
length=1037, char=0: 531.03 (-2149.45%) 21.62 ( 8.42%) 23.61
length=1038, char=0: 531.64 (-2151.87%) 21.62 ( 8.42%) 23.61
length=1039, char=0: 531.99 (-2151.63%) 21.80 ( 7.75%) 23.63
* sysdeps/aarch64/memset-reg.h: New file.
* sysdeps/aarch64/memset.S: Use it.
(__memset): Rename to MEMSET macro.
[ZVA_MACRO]: Use zva_macro.
* sysdeps/aarch64/multiarch/Makefile (sysdep_routines):
Add memset_generic and memset_falkor.
* sysdeps/aarch64/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Add memset ifuncs.
* sysdeps/aarch64/multiarch/init-arch.h (INIT_ARCH): New
local variable zva_size.
* sysdeps/aarch64/multiarch/memset.c: New file.
* sysdeps/aarch64/multiarch/memset_generic.S: New file.
* sysdeps/aarch64/multiarch/memset_falkor.S: New file.
* sysdeps/aarch64/multiarch/rtld-memset.S: New file.
* sysdeps/unix/sysv/linux/aarch64/cpu-features.c
(DCZID_DZP_MASK): New macro.
(DCZID_BS_MASK): Likewise.
(init_cpu_features): Read and set zva_size.
* sysdeps/unix/sysv/linux/aarch64/cpu-features.h
(struct cpu_features): New member zva_size.
2017-11-20 12:55:04 +00:00
|
|
|
|
2020-03-17 15:44:18 +00:00
|
|
|
#include <sysdep.h>
|
aarch64: Optimized memset for falkor
The generic memset reads dczid_el0 on every memset. This has a
significant impact on falkor for a range of sizes because reading
dczid_el0 is slow.
The DZP bit in the dczid_el0 register does not change dynamically, so
it is safe to read once during program startup. With this patch
dczid_el0 is read once during startup and zva_size is cached. This is
used to invoke the falkor-specific memset; the generic memset routine
remains unchanged.
The gains due to this are significant for falkor, with run time
reductions as high as 48%. Here's a sample from the falkor tests:
Function: memset
Variant: walk
simple_memset __memset_falkor __memset_generic
=====================================================================
length=256, char=0: 139.96 (-698.28%) 9.07 ( 48.26%) 17.53
length=257, char=0: 140.50 (-699.03%) 9.53 ( 45.80%) 17.58
length=258, char=0: 140.96 (-703.95%) 9.58 ( 45.36%) 17.53
length=259, char=0: 141.56 (-705.16%) 9.53 ( 45.79%) 17.58
length=260, char=0: 142.15 (-710.76%) 9.57 ( 45.39%) 17.53
length=261, char=0: 142.50 (-710.39%) 9.53 ( 45.78%) 17.58
length=262, char=0: 142.97 (-715.09%) 9.57 ( 45.42%) 17.54
length=263, char=0: 143.51 (-716.18%) 9.53 ( 45.80%) 17.58
length=264, char=0: 143.93 (-720.55%) 9.58 ( 45.39%) 17.54
length=265, char=0: 144.56 (-722.07%) 9.53 ( 45.80%) 17.59
length=266, char=0: 144.98 (-726.42%) 9.58 ( 45.42%) 17.54
length=267, char=0: 145.53 (-727.53%) 9.53 ( 45.80%) 17.59
length=268, char=0: 146.25 (-731.81%) 9.53 ( 45.79%) 17.58
length=269, char=0: 146.52 (-735.39%) 9.53 ( 45.66%) 17.54
length=270, char=0: 146.97 (-735.81%) 9.53 ( 45.80%) 17.58
length=271, char=0: 147.54 (-741.08%) 9.58 ( 45.38%) 17.54
length=512, char=0: 268.26 (-1307.85%) 12.06 ( 36.71%) 19.05
length=513, char=0: 268.73 (-1273.89%) 13.56 ( 30.68%) 19.56
length=514, char=0: 269.31 (-1276.89%) 13.56 ( 30.68%) 19.56
length=515, char=0: 269.73 (-1279.05%) 13.56 ( 30.68%) 19.56
length=516, char=0: 270.34 (-1282.24%) 13.56 ( 30.67%) 19.56
length=517, char=0: 270.83 (-1284.71%) 13.56 ( 30.66%) 19.56
length=518, char=0: 271.20 (-1286.54%) 13.56 ( 30.67%) 19.56
length=519, char=0: 271.67 (-1288.67%) 13.65 ( 30.24%) 19.56
length=520, char=0: 272.14 (-1291.04%) 13.65 ( 30.22%) 19.56
length=521, char=0: 272.66 (-1293.69%) 13.65 ( 30.23%) 19.56
length=522, char=0: 273.14 (-1296.13%) 13.65 ( 30.20%) 19.56
length=523, char=0: 273.64 (-1298.75%) 13.65 ( 30.23%) 19.56
length=524, char=0: 274.34 (-1302.16%) 13.66 ( 30.20%) 19.57
length=525, char=0: 274.64 (-1297.78%) 13.56 ( 30.99%) 19.65
length=526, char=0: 275.20 (-1300.04%) 13.56 ( 31.01%) 19.66
length=527, char=0: 275.66 (-1302.86%) 13.56 ( 30.99%) 19.65
length=1024, char=0: 524.46 (-2169.75%) 20.12 ( 12.92%) 23.11
length=1025, char=0: 525.14 (-2124.63%) 21.62 ( 8.40%) 23.61
length=1026, char=0: 525.59 (-2125.36%) 21.88 ( 7.37%) 23.62
length=1027, char=0: 525.98 (-2127.14%) 21.62 ( 8.46%) 23.62
length=1028, char=0: 526.68 (-2131.10%) 21.62 ( 8.42%) 23.61
length=1029, char=0: 527.10 (-2131.70%) 21.79 ( 7.73%) 23.62
length=1030, char=0: 527.54 (-2118.51%) 21.62 ( 9.10%) 23.78
length=1031, char=0: 527.98 (-2136.37%) 21.62 ( 8.43%) 23.61
length=1032, char=0: 528.70 (-2139.38%) 21.62 ( 8.43%) 23.61
length=1033, char=0: 529.25 (-2124.37%) 21.62 ( 9.11%) 23.79
length=1034, char=0: 529.48 (-2142.95%) 21.62 ( 8.43%) 23.61
length=1035, char=0: 530.11 (-2145.13%) 21.62 ( 8.44%) 23.61
length=1036, char=0: 530.76 (-2147.10%) 21.79 ( 7.73%) 23.62
length=1037, char=0: 531.03 (-2149.45%) 21.62 ( 8.42%) 23.61
length=1038, char=0: 531.64 (-2151.87%) 21.62 ( 8.42%) 23.61
length=1039, char=0: 531.99 (-2151.63%) 21.80 ( 7.75%) 23.63
* sysdeps/aarch64/memset-reg.h: New file.
* sysdeps/aarch64/memset.S: Use it.
(__memset): Rename to MEMSET macro.
[ZVA_MACRO]: Use zva_macro.
* sysdeps/aarch64/multiarch/Makefile (sysdep_routines):
Add memset_generic and memset_falkor.
* sysdeps/aarch64/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Add memset ifuncs.
* sysdeps/aarch64/multiarch/init-arch.h (INIT_ARCH): New
local variable zva_size.
* sysdeps/aarch64/multiarch/memset.c: New file.
* sysdeps/aarch64/multiarch/memset_generic.S: New file.
* sysdeps/aarch64/multiarch/memset_falkor.S: New file.
* sysdeps/aarch64/multiarch/rtld-memset.S: New file.
* sysdeps/unix/sysv/linux/aarch64/cpu-features.c
(DCZID_DZP_MASK): New macro.
(DCZID_BS_MASK): Likewise.
(init_cpu_features): Read and set zva_size.
* sysdeps/unix/sysv/linux/aarch64/cpu-features.h
(struct cpu_features): New member zva_size.
2017-11-20 12:55:04 +00:00
|
|
|
#include <memset-reg.h>
|
|
|
|
|
|
|
|
|
|
/* Reading dczid_el0 is expensive on falkor so move it into the ifunc
|
|
|
|
|
resolver and assume ZVA size of 64 bytes. The IFUNC resolver takes care to
|
|
|
|
|
use this function only when ZVA is enabled. */
|
|
|
|
|
|
|
|
|
|
#if IS_IN (libc)
|
|
|
|
|
.macro zva_macro
|
|
|
|
|
.p2align 4
|
|
|
|
|
/* Write the first and last 64 byte aligned block using stp rather
|
|
|
|
|
than using DC ZVA. This is faster on some cores. */
|
|
|
|
|
str q0, [dst, 16]
|
|
|
|
|
stp q0, q0, [dst, 32]
|
|
|
|
|
bic dst, dst, 63
|
|
|
|
|
stp q0, q0, [dst, 64]
|
|
|
|
|
stp q0, q0, [dst, 96]
|
|
|
|
|
sub count, dstend, dst /* Count is now 128 too large. */
|
|
|
|
|
sub count, count, 128+64+64 /* Adjust count and bias for loop. */
|
|
|
|
|
add dst, dst, 128
|
|
|
|
|
1: dc zva, dst
|
|
|
|
|
add dst, dst, 64
|
|
|
|
|
subs count, count, 64
|
|
|
|
|
b.hi 1b
|
|
|
|
|
stp q0, q0, [dst, 0]
|
|
|
|
|
stp q0, q0, [dst, 32]
|
|
|
|
|
stp q0, q0, [dstend, -64]
|
|
|
|
|
stp q0, q0, [dstend, -32]
|
|
|
|
|
ret
|
|
|
|
|
.endm
|
|
|
|
|
|
|
|
|
|
# define ZVA_MACRO zva_macro
|
|
|
|
|
# define MEMSET __memset_falkor
|
|
|
|
|
# include <sysdeps/aarch64/memset.S>
|
|
|
|
|
#endif
|
