Move some float128 symbol version definitions.
With support for _Float128 functions on platforms where that type has
the same ABI as long double, as well as on platforms where it is
ABI-distinct, those functions will need to be exported from glibc's
shared libraries at appropriate symbol versions in each case.
This patch avoids duplication of lists of symbols to export by moving
the symbols other than __* to math/Versions and stdlib/Versions.
There, they are conditional on <float128-abi.h> defining
FLOAT128_VERSION and a default version of that header is added that
does not define that macro. Enabling the float128 function aliases
will then include adding a sysdeps/ieee754/ldbl-128/float128-abi.h
that defines FLOAT128_VERSION to GLIBC_2.27. Symbols __* remain in
sysdeps/ieee754/float128/Versions; those symbols should be present
only once per floating-point format, not once per type.
Note that if any platforms currently lacking support for a type with
binary128 format get glibc support for such a type in future (whether
only as _Float128, or also as a new long double format), and new libm
functions (present for all types) have been added by then, additional
macros will be needed to allow such functions to get a version of the
form "GLIBC_2.28 if the platform had _Float128 support by then, or the
later version at which that platform had _Float128 support added".
This is not however a preexisting condition, but would have applied
equally to the existing support for _Float128 as an ABI-distinct
type. New all-type libm functions should just be added to the
appropriate symbol version (currently GLIBC_2.27) for all types, with
such special-case handling for _Float128 versions (and _Float64x as
well in future) waiting until someone actually wants to add support
for _Float128 to an existing platform after a release in which that
platform and a post-2.26 libm function had support but that platform
lacked _Float128 support.
Tested with build-many-glibcs.py that installed stripped shared
libraries are unchanged by this patch. Also tested in conjunction
with the remaining changes to enable float128 aliases.
* sysdeps/generic/float128-abi.h: New file.
* sysdeps/ieee754/float128/Versions (FLOAT128_VERSION): Move
non-__prefixed symbols to ....
* math/Versions: ... here. Include <float128-abi.h>.
* stdlib/Versions ... and here. Include <float128-abi.h>
2017-10-16 22:04:42 +00:00
|
|
|
%include <float128-abi.h>
|
1998-07-02 22:51:40 +00:00
|
|
|
libc {
|
|
|
|
GLIBC_2.0 {
|
|
|
|
# functions used in inline functions or macros
|
|
|
|
__isnan; __isnanf; __isnanl; __finite; __finitef; __finitel;
|
|
|
|
__isinf; __isinff; __isinfl;
|
|
|
|
|
1998-09-22 19:08:42 +00:00
|
|
|
# global variables
|
|
|
|
__fpu_control;
|
|
|
|
|
1998-07-02 22:51:40 +00:00
|
|
|
# c*
|
|
|
|
copysign; copysignf; copysignl;
|
|
|
|
|
|
|
|
# f*
|
|
|
|
finite; finitef; finitel; frexp; frexpf; frexpl;
|
|
|
|
|
|
|
|
# i*
|
|
|
|
isinf; isinff; isinfl; isnan; isnanf; isnanl; ldexp; ldexpf; ldexpl;
|
|
|
|
|
|
|
|
# m*
|
|
|
|
modf; modff; modfl;
|
|
|
|
|
|
|
|
# s*
|
|
|
|
scalbn; scalbnf; scalbnl;
|
|
|
|
}
|
|
|
|
GLIBC_2.1 {
|
|
|
|
# functions used in inline functions or macros
|
|
|
|
__signbit; __signbitf; __signbitl;
|
|
|
|
|
|
|
|
# s*
|
|
|
|
scalbln; scalblnf; scalblnl;
|
|
|
|
}
|
2015-09-19 12:23:16 +00:00
|
|
|
GLIBC_2.20 {
|
2015-08-07 07:53:56 +00:00
|
|
|
}
|
1998-07-02 22:51:40 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
libm {
|
|
|
|
GLIBC_2.0 {
|
1997-06-21 02:59:26 +00:00
|
|
|
# mathematical functions
|
|
|
|
acos; acosf; acosl;
|
|
|
|
acosh; acoshf; acoshl;
|
|
|
|
asin; asinf; asinl;
|
|
|
|
asinh; asinhf; asinhl;
|
|
|
|
atan2; atan2f; atan2l;
|
|
|
|
atan; atanf; atanl;
|
|
|
|
atanh; atanhf; atanhl;
|
|
|
|
cbrt; cbrtf; cbrtl;
|
|
|
|
ceil; ceilf; ceill;
|
|
|
|
copysign; copysignf; copysignl;
|
|
|
|
cos; cosf; cosl;
|
|
|
|
coshf; cosh; coshl;
|
|
|
|
drem; dremf; dreml;
|
|
|
|
erf; erff; erfl;
|
|
|
|
erfc; erfcf; erfcl;
|
|
|
|
exp; expf; expl;
|
|
|
|
expm1; expm1f; expm1l;
|
|
|
|
fabs; fabsf; fabsl;
|
|
|
|
finite; finitef; finitel;
|
|
|
|
floor; floorf; floorl;
|
|
|
|
fmod; fmodf; fmodl;
|
|
|
|
frexp; frexpf; frexpl;
|
|
|
|
gamma; gammaf; gammal;
|
|
|
|
gamma_r; gammaf_r; gammal_r;
|
|
|
|
hypot; hypotf; hypotl;
|
|
|
|
ilogb; ilogbf; ilogbl;
|
|
|
|
j0; j0f; j0l;
|
|
|
|
j1; j1f; j1l;
|
|
|
|
jn; jnf; jnl;
|
|
|
|
ldexp; ldexpf; ldexpl;
|
|
|
|
lgamma; lgammaf; lgammal;
|
|
|
|
lgamma_r; lgammaf_r; lgammal_r;
|
|
|
|
log10; log10f; log10l;
|
|
|
|
log1p; log1pf; log1pl;
|
|
|
|
log; logf; logl;
|
|
|
|
logb; logbf; logbl;
|
|
|
|
matherr;
|
|
|
|
modf; modff; modfl;
|
|
|
|
nextafter; nextafterf; nextafterl;
|
|
|
|
pow; powf; powl;
|
|
|
|
remainder; remainderf; remainderl;
|
|
|
|
rint; rintf; rintl;
|
|
|
|
scalb; scalbf; scalbl;
|
|
|
|
scalbn; scalbnf; scalbnl;
|
|
|
|
significand; significandf; significandl;
|
|
|
|
sin; sinf; sinl;
|
|
|
|
sinh; sinhf; sinhl;
|
|
|
|
sqrt; sqrtf; sqrtl;
|
|
|
|
tan; tanf; tanl;
|
|
|
|
tanh; tanhf; tanhl;
|
|
|
|
y0; y0f; y0l;
|
|
|
|
y1; y1f; y1l;
|
|
|
|
yn; ynf; ynl;
|
|
|
|
|
1998-02-17 15:51:21 +00:00
|
|
|
|
|
|
|
# global variables
|
|
|
|
_LIB_VERSION; signgam;
|
1998-07-02 22:51:40 +00:00
|
|
|
}
|
|
|
|
GLIBC_2.1 {
|
1998-02-17 15:51:21 +00:00
|
|
|
# mathematical functions
|
2005-03-28 20:42:53 +00:00
|
|
|
exp2; exp2f; # exp2l; -- bug omitted this until GLIBC_2.4 (below)
|
1998-06-09 18:24:13 +00:00
|
|
|
exp10; exp10f; exp10l;
|
1998-02-17 15:51:21 +00:00
|
|
|
fdim; fdimf; fdiml;
|
|
|
|
fma; fmaf; fmal;
|
|
|
|
fmax; fmaxf; fmaxl;
|
|
|
|
fmin; fminf; fminl;
|
|
|
|
log2; log2f; log2l;
|
|
|
|
nan; nanf; nanl;
|
|
|
|
nearbyint; nearbyintf; nearbyintl;
|
1999-01-19 10:11:00 +00:00
|
|
|
nexttoward; nexttowardf; nexttowardl;
|
1998-06-09 18:24:13 +00:00
|
|
|
pow10; pow10f; pow10l;
|
1998-02-17 15:51:21 +00:00
|
|
|
remquo; remquof; remquol;
|
|
|
|
lrint; lrintf; lrintl;
|
|
|
|
llrint; llrintf; llrintl;
|
|
|
|
round; roundf; roundl;
|
|
|
|
lround; lroundf; lroundl;
|
|
|
|
llround; llroundf; llroundl;
|
|
|
|
scalbln; scalblnf; scalblnl;
|
|
|
|
sincos; sincosf; sincosl;
|
|
|
|
trunc; truncf; truncl;
|
1998-07-28 16:26:04 +00:00
|
|
|
tgamma; tgammaf; tgammal;
|
1998-02-17 15:51:21 +00:00
|
|
|
|
1997-06-21 02:59:26 +00:00
|
|
|
# complex functions
|
|
|
|
cabs; cabsf; cabsl;
|
|
|
|
cacos; cacosf; cacosl;
|
|
|
|
cacosh; cacoshf; cacoshl;
|
|
|
|
carg; cargf; cargl;
|
|
|
|
casin; casinf; casinl;
|
|
|
|
casinh; casinhf; casinhl;
|
|
|
|
catan; catanf; catanl;
|
|
|
|
catanh; catanhf; catanhl;
|
|
|
|
ccos; ccosf; ccosl;
|
|
|
|
ccosh; ccoshf; ccoshl;
|
|
|
|
cexp; cexpf; cexpl;
|
|
|
|
cimag; cimagf; cimagl;
|
|
|
|
clog; clogf; clogl;
|
Update.
1997-10-12 05:09 Ulrich Drepper <drepper@cygnus.com>
* libio/Makefile (routines): Remove iofprintf.
* stdio-common/fprintf.c [USE_IN_LIBIO]: Define _IO_fprintf.
* libio/filedoalloc.c: Use _G_stat64 instead of stat.
* libio/fileops.c (_IO_file_open): Change to take extra argument
indicating whether 32 or 64 bit mode is wanted.
* libio/iofopen.c: Call _IO_file_open with extra argument set to 0.
* libio/iofopen64.c: Call _IO_file_open with extra argument set to 0.
* libio/iolibio.h (_IO_freopen, _IO_freopen64): Likewise.
* libio/iofgetpos.c: Pretty print.
* libio/iofgetpos64.c: Use _IO_fpos64_t for local variable `pos'.
* manual/conf.texi: Document all the _SC_ and _CS_ constants.
* manual/creature.texi: Document _LARGEFILE_SOURCE, _LARGEFILE64_SOURCE
and _FILE_OFFSET_BITS.
* manual/llio.texi: Document truncate and ftruncate.
* manual/stdio.texi: Document positional parameters for printf.
* math/Makefile (headers): Add tgmath.h.
(libm-support): Remove s_lrint, s_llrint, s_lround, and s_llround and
move to ...
(libm-calls): ... here. Add scalbln, s_nextafterx and s_fma.
* math/libm-test.c (lround_test, llround_test): Test for all FP formats
by using FUNC().
* math/libm.map: Add fma, fmaf, fmal, nextafterx, nextafterxf,
nextafterxl, scalbln, scalblnf, scalblnl, lrintf, lrintl, llrintf,
llrintl, lroundf, lroundl, llroundf, and llroundl.
* math/math.h: Document new platform specific macros from mathdef.h.
Remove declaration of lrint, llrint, lround, and llround.
* math/test-double.c: Define TEST_DOUBLE.
* math/test-idouble.c: Likewise.
* math/test-float.c: Define TEST_FLOAT.
* math/test-ifloat.c: Likewise.
* math/tgmath.h: New file.
* math/bits/mathcalls.h: Add nextafterx, scalbln, fma, lrint, llrint,
lround, and llround.
Change second argument of scalbn to `int'.
* sysdeps/libm-ieee754/s_fma.S: New file.
* sysdeps/libm-ieee754/s_fmaf.S: New file.
* sysdeps/libm-ieee754/s_fmal.S: New file.
* sysdeps/libm-i387/s_fma.S: New file.
* sysdeps/libm-i387/s_fmaf.S: New file.
* sysdeps/libm-i387/s_fmal.S: New file.
* sysdeps/libm-i387/s_llrint.S: Change to take double argument.
* sysdeps/libm-i387/s_lrint.S: Likewise.
* sysdeps/libm-i387/s_llrintf.S: New file.
* sysdeps/libm-i387/s_llrintl.S: New file.
* sysdeps/libm-i387/s_lrintf.S: New file.
* sysdeps/libm-i387/s_lrintl.S: New file.
* sysdeps/libm-ieee754/s_llrint.c: Remove version which works on
80bit double.
* sysdeps/libm-ieee754/s_lrint.c: Likewise.
* sysdeps/libm-ieee754/s_llrintf.S: New file.
* sysdeps/libm-ieee754/s_llrintl.S: New file.
* sysdeps/libm-ieee754/s_lrintf.S: New file.
* sysdeps/libm-ieee754/s_lrintl.S: New file.
* sysdeps/libm-i387/s_scalbln.c: New file. Empty file.
* sysdeps/libm-i387/s_scalblnf.c: New file. Empty file.
* sysdeps/libm-i387/s_scalblnl.c: New file. Empty file.
* sysdeps/libm-i387/s_scalbn.c: Add scalbln as alias.
* sysdeps/libm-i387/s_scalbnf.c: Add scalblnf as alias.
* sysdeps/libm-i387/s_scalbnl.c: Add scalblnl as alias.
* sysdeps/libm-ieee754/s_llround.c: Remove version which works on
80bit double.
* sysdeps/libm-ieee754/s_lround.c: Likewise.
* sysdeps/libm-ieee754/s_llroundf.c: Likewise.
* sysdeps/libm-ieee754/s_llroundl.c: Likewise.
* sysdeps/libm-ieee754/s_lroundf.c: Likewise.
* sysdeps/libm-ieee754/s_lroundl.c: Likewise.
* sysdeps/libm-ieee754/s_nextafterl.c: Add alias fo nextafterxl.
* sysdeps/libm-ieee754/s_nextafterx.c: New file.
* sysdeps/libm-ieee754/s_nextafterxf.c: New file.
* sysdeps/libm-ieee754/s_nextafterxl.c: New file.
* sysdeps/libm-ieee754/s_scalbln.c: New file.
* sysdeps/libm-ieee754/s_scalblnf.c: New file.
* sysdeps/libm-ieee754/s_scalblnl.c: New file.
* sysdeps/libm-ieee754/s_scalbn.c: Change to take `int' as second arg.
* sysdeps/libm-ieee754/s_scalbnf.c: Likewise.
* sysdeps/libm-ieee754/s_scalbnl.c: Likewise.
* stdlib/stdlib.h: Protect declarations of __strto*l_internal functions
by #ifdefs since they are duplicated in inttypes.h.
* sysdeps/wordsize-32/inttypes.h: Add definition of strtoimax and
strtoumax plus needed declarations.
* sysdeps/generic/confname.h (_SC_AIO_LISTIO_MAX): Fix typo.
1997-10-09 Andreas Jaeger <aj@arthur.rhein-neckar.de>
* locale/programs/locfile.c (locfile_read): Correct while loop.
* db2/makedb.c (main): Add missing parameter for error output.
(process_input): Likewise.
* resolv/gethnamaddr.c (getanswer): Rewrite a bit to avoid warning.
1997-10-12 05:05 Ulrich Drepper <drepper@cygnus.com>
* libc-map: Add __bzero, __mempcpy.
1997-10-10 18:51 David S. Miller <davem@tanya.rutgers.edu>
* sysdeps/unix/sysv/linux/sparc/bits/ioctls.h: Remove dependencies
on kernel_termios.h
1997-10-09 10:24 Thorsten Kukuk <kukuk@vt.uni-paderborn.de>
Add the changes from the Solaris 2.6 header files, use the new public
defines/functions.
* nis/nis_addmember.c: Updated.
* nis/nis_checkpoint.c: Updated.
* nis/nis_creategroup.c: updated.
* nis/nis_destroygroup.c: Updated.
* nis/nis_getservlist.c: Updated.
* nis/nis_ismember.c: Updated.
* nis/nis_lookup.c: Updated.
* nis/nis_modify.c: Updated.
* nis/nis_ping.c: Updated.
* nis/nis_print.c: Updated.
* nis/nis_print_group_entry.c: Updated.
* nis/nis_remove.c: Updated.
* nis/nis_removemember.c: Updated.
* nis/nis_xdr.c: Updated.
* nis/nss_nisplus/nisplus-alias.c: Updated.
* nis/nss_nisplus/nisplus-ethers.c: Updated.
* nis/nss_nisplus/nisplus-hosts.c: Updated.
* nis/nss_nisplus/nisplus-network.c: Updated.
* nis/nss_nisplus/nisplus-parser.c: Updated.
* nis/nss_nisplus/nisplus-proto.c: Updated.
* nis/nss_nisplus/nisplus-rpc.c: Updated.
* nis/nss_nisplus/nisplus-service.c: Updated.
* nis/rpcsvc/nis.h: Updated.
* nis/rpcsvc/nis.x: Updated.
* nis/rpcsvc/nis_object.x: Updated.
* nis/rpcsvc/nis_tags.h: Updated.
* nis/rpcsvc/nislib.h: Updated.
* nis/lckcache.c: Removed, since Sun has dropped the directory
signatures. The old cache version is now a security risk and not
longer supported by Sun.
* nis/nis_cache.c: Likewise.
* nis/rpcsvc/nis_cache.h: Likewise.
* nis/rpcsvc/nis_cache.x: Likewise.
* nis/nis_call.c: Remove calls to the cache functions.
* nis/libnsl.map: Remove cache and depending functions.
* nis/nis_intern.h: Likewise.
* nis/nis_add.c: Remove #include <rpcsvc/nislib.h>.
* nis/nis_domain_of.c: Likewise.
* nis/nis_domain_of_r.c: Likewise.
* nis/nis_error.c: Likewise.
* nis/nis_file.c: Likewise.
* nis/nis_local_names.c: Likewise.
* nis/nis_mkdir.c: Likewise.
* nis/nis_rmdir.c: Likewise.
* nis/nis_subr.c: Likewise.
* nis/nis_verifygroup.c: Likewise.
* nis/nis_clone.c: Removed, replaced by ...
* nis/nis_clone_dir.c: New.
* nis/nis_clone_obj.c: New.
* nis/nis_clone_res.c: New.
* nis/nis_table.c: Fixed bugs shown through the new clone functions.
* nis/nis_defaults.c: Fixed a lot of race conditions.
* nis/nis_free.c: Rewritten.
* sunrpc/auth_des.c: Fix use of free'ed pointer.
* nis/Makefile (libnsl-routines): Remove nis_clone, nis_cache and
lckcache. Add nis_clone_dir, nis_clone_obj, and nis_clone_res.
1997-10-09 Andreas Jaeger <aj@arthur.rhein-neckar.de>
* wctype/test_wctype.c (TEST): Add parens to avoid ambiguity.
1997-10-08 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
* include/features.h: Don't crash if _XOPEN_SOURCE is defined to
be empty.
1997-10-09 05:54 Ulrich Drepper <drepper@cygnus.com>
* nss/digits_dots.c: Place `result' in resbuf and not in `buffer'.
* nss/getXXbyYY_r.c: Make sure digits_dots.c sees `resbuf' as
struct and not a pointer. Little optimizations.
1997-10-09 05:00 Ulrich Drepper <drepper@cygnus.com>
* sysdeps/stub/getenv.c: Remove unused file.
* sysdeps/stub/lxstat.c: Likewise.
* sysdeps/stub/morecore.c: Likewise.
* sysdeps/stub/putenv.c: Likewise.
* sysdeps/stub/sbrk.c: Likewise.
* sysdeps/stub/setenv.c: Likewise.
* sysdeps/stub/sysd-stdio.c: Likewise.
* sysdeps/stub/sysdep.h: Likewise.
Reported by Zack Weinberg <zack@rabi.phys.columbia.edu>.
1997-10-09 04:58 Ulrich Drepper <drepper@cygnus.com>
* configure.in: Add __bzero definition to DWARF2 unwind test.
Reported by David S. Miller <davem@caip.rutgers.edu>.
1997-10-07 Paul Eggert <eggert@twinsun.com>
* intl/loadmsgcat.c (_nl_load_domain):
Fix &&/|| typo when checking file size.
Check for overflow when stuffing off_t into size_t.
1997-10-07 18:11 Ulrich Drepper <drepper@cygnus.com>
* time/africa: Update from tzdata1997i.
1997-10-07 Andreas Jaeger <aj@arthur.rhein-neckar.de>
* posix/globtest.sh: Add arguments for name of dynamic linker and
call dynamic linker to execute globtest.
* posix/Makefile (tests): Supply arguments to globtest.sh.
1997-10-07 Andreas Jaeger <aj@arthur.rhein-neckar.de>
* nis/rpcsvc/ypupd.h: Add missing __END_DECLS.
1997-10-03 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
* libc.map: Add mempcpy, prctl.
1997-09-30 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
* sysdeps/generic/memcmp.c: Avoid warnings.
* sysdeps/generic/memset.c: Likewise.
* sysdeps/generic/strchr.c: Likewise.
* sysdeps/generic/strlen.c: Likewise.
1997-09-29 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
* malloc/Makefile ($(objpfx)mtrace): Fix typo.
1997-09-29 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
* sysdeps/m68k/dl-machine.h (elf_machine_rela): Fix last change.
The R_68K_GLOB_DAT and R_68K_JMP_SLOT relocations really ignore
the addend, Richard.
(elf_machine_fixup_plt): Don't add the addend.
(elf_machine_plt_value): New function.
* sysdeps/alpha/dl-machine.h (elf_machine_plt_value): New
function.
* sysdeps/sparc/sparc32/dl-machine.h (elf_machine_plt_value): New
function.
* sysdeps/sparc/sparc64/dl-machine.h (elf_machine_plt_value): New
function.
* sysdeps/powerpc/dl-machine.h (elf_machine_plt_value): New
function.
* sysdeps/i386/dl-machine.h (elf_machine_plt_value): New
function.
* elf/dl-runtime.c (fixup, profile_fixup): Don't add in the
addend, instead let the machine dependent setup decide.
1997-09-20 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
* sysdeps/m68k/m68020/bits/string.h: New file.
1997-10-07 04:27 Richard Henderson <rth@cygnus.com>
* Makeconfig (+includes): Add -I$(objpfx).
* stdlib/longlong.h [__sparc__]: Prototype __udiv_qrnnd.
* sysdeps/alpha/setjmp.S: __setjmp is the same as _setjmp. Make
the former a strong symbol and the later a weak alias.
* sysdeps/sparc/sparc32/setjmp.S: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/setjmp.S: Likewise.
1997-10-06 21:01 David S. Miller <davem@tanya.rutgers.edu>
* sysdeps/unix/sysv/linux/sparc/sparc64/bits/types.h: Make ino_t
64-bits.
* sysdeps/unix/sysv/linux/sparc/sparc64/kernel_stat.h: Make st_ino
member 64-bits as well, to match the kernel.
1997-10-06 19:35 Ulrich Drepper <drepper@cygnus.com>
* sysdeps/sparc/sparc64/sub_n.S: Fix typo.
Patch by Jakub Jelinek <jj@sunsite.ms.mff.cuni.cz>.
1997-10-06 01:09 Zack Weinberg <zack@rabi.phys.columbia.edu>
* time/README: Correct list of files from tzcode package. Add
contact information for tzcode/tzdata maintainers. Correct
spelling of author's name. Compact lists.
1997-10-06 01:48 Ulrich Drepper <drepper@cygnus.com>
* malloc/malloc.h: Remove hook definition without caller argument.
* malloc/malloc.c: Likewise.
* string/tester.c: Correct strsep test.
* string/bits/string2.h: Define __string2_1bptr_p and use it.
Patch by David S. Miller <davem@tanya.rutgers.edu>.
* math/Makefile (routines): Add s_clog10.
* math/libm-test.c: Add test for clog10.
* math/libm.map: Add clog10{,f,l}.
* math/bits/cmathcalls.h [__USE_GNU]: Add clog10.
* sysdeps/libm-ieee754/s_clog10.c: New file.
* sysdeps/libm-ieee754/s_clog10f.c: New file.
* sysdeps/libm-ieee754/s_clog10l.c: New file.
* manual/math.texi: Describe clog10.
* config.h.in: Add USE_REGPARMS and define internal_function based on
this.
* configure.in: Define USE_REGPARMS for ix86 machines.
* gmon/gmon.c: Mark write_hist, write_call_graph and write_bb_counts
as internal functions.
* inet/getnameinfo.c: Likewise for nrl_domainname.
* inet/getnetgrent_r.c: Likewise for __internal_setnetgrent_reuse.
* inet/rcmd.c: Likewise for __icheckhost.
* intl/dcgettext.c: Likewise for category_to_name and
guess_category_value.
* intl/localealias.c: Likewise for read_alias_file.
* io/fts.c: Likewise for fts_alloc, fts_build, fts_lfree,
fts_maxarglen, fts_padjust, fts_palloc, fts_sort, and fts_stat.
* libio/genops.c: Likewise for save_for_backup.
* malloc/malloc.c (chunk_free, chunk_alloc, chunk_realloc, chunk_align,
main_trim, heap_trim): Likewise.
* malloc/mtrace.c (tr_where): Likewise.
* misc/fstab.c (mnt2fs): Likewise.
* misc/getttyent.c (skip, value): Likewise.
* misc/syslog.c (openlog_internal): Likewise.
* misc/tsearch.c (trecurse, tdestroy_internal): Likewise.
* nss/nsswitch.c (nss_lookup_function, nss_parse_file, nss_getline,
nss_parse_service_list, nss_new_service): Likewise.
* posix/wordexp.c (parse_dollars, parse_backtick, eval_expr): Likewise.
* resolv/inet_ntop.c (inet_ntop4, inet_ntop6): Likewise.
* resolv/inet_pton.c (inet_pton4, inet_pton6): Likewise.
* resolv/res_init.c (res_setoptions): Likewise.
* stdio-common/printf_fp.c (group_number): Likewise.
* stdio-common/vfprintf.c (buffered_vfprintf, group_number): Likewise.
* stdlib/fmtmsg.c (internal_addseverity): Likewise.
* sunrpc/auth_des.c (synchronize): Likewise.
* sunrpc/auth_unix.c (marshal_new_auth): Likewise.
* sunrpc/clnt_perr.c (auth_errmsg): Likewise.
* sunrpc/key_call.c (key_call): Likewise.
* sunprc/pmap_rmt.c (getbroadcastnets): Likewise.
* sunrpc/svc_tcp.c (makefd_xprt): Likewise.
* sunrpc/svcauth_des.c (cache_init, cache_spot, cache_ref, invalidate):
Likewise.
* sunrpc/xdr_rec.c (fix_buf_size, skip_input_bytes, flush_out,
set_input_fragment, get_input_bytes): Likewise.
* sysdeps/unix/sysv/linux/getsysstats.c (get_proc_path,
phys_pages_info): Likewise.
* sysdeps/unix/sysv/linux/if_index.c (opensock): Likewise.
* sysdeps/unix/sysv/linux/poll.c (__emulate_poll): Likewise.
* sysdeps/unix/sysv/linux/readv.c (__atomic_readv_replacement):
Likewise.
* sysdeps/unix/sysv/linux/readv.c (__atomic_writev_replacement):
Likewise.
* time/strptime.c (strptime_internal): Likewise.
* time/tzfile.c (find_transition, compute_tzname_max): Likewise.
* time/tzset.c (compute_change, tz_compute, tzset_internal): Likewise.
* libc.map: Remove _libio_using_thunks, add _fp_hw and _dl_addr.
* ctype/ctype.h: Pretty print.
* grp/grp.h: Likewise.
* include/libc-symbols.h: Likewise.
* include/limits.h: Likewise.
* include/values.h: Likewise.
* io/fcntl.h: Likewise.
* io/sys/stat.h: Likewise.
* libio/stdio.h: Likewise.
* malloc/malloc.h: Likewise.
* misc/err.h: Likewise.
* misc/regexp.h: Likewise.
* misc/sys/cdefs.h: Likewise.
* misc/sys/file.h: Likewise.
* posix/sys/utsname.h: Likewise.
* posix/sys/wait.h: Likewise.
* pwd/pwd.h: Likewise.
* resolv/netdb.h: Likewise.
* signal/signal.h: Likewise.
* stdlib/stdlib.h: Likewise.
* string/endian.h: Likewise.
* string/memory.h: Likewise.
* sysdeps/mach/hurd/bits/fcntl.h: Likewise.
* sysdeps/mach/hurd/sys/param.h: Likewise.
* sysdeps/unix/sysv/linux/sys/param.h: Likewise.
* termios/termios.h: Likewise.
* wcsmbs/wchar.h: Likewise.
* wctype/wctype.h: Likewise.
* sysdeps/unix/bsd/bsd4.4/wait3.c: Use __WAIT_STATUS in definition.
Implement Large File Support API.
* include/features.h: Add suuport for _LARGEFILE_SOURCE,
_LARGEFILE64_SOURCE, and _FILE_OFFSET_BITS.
* libc.map: Add new functions for LFS.
* dirent/Makefile (routines): Add readdir64 and readdir64_r.
* dirent/dirent.h: Update readdir prototype for LFS and add new
prototypes for above functions.
* io/Makefile (routines): Add xstat64, fxstat64, lxstat64,
statfs64, fstatfs64, lstat64, open64, lseek64, creat64, and ftw64.
* io/creat64.c: New file.
* io/fstat64.c: New file.
* io/lstat64.c: New file.
* io/stat64.c: New file.
* io/ftw64.c: New file.
* io/ftw.c: Rewrite to allow easy definition of ftw64.
* io/ftw.h: Add LFS interface.
* io/fcntl.h: Likewise.
* io/sys/stat.h: Likewise.
* io/sys/statfs.h: Likewise.
* libio/Makefile (routines): Add iofgetpos64, iofopen64, iofsetpos64,
freopen64, fseeko64, and ftello64.
* libcio/fseeko64.c: New file.
* libio/ftello64.c: New file.
* libio/iofgetpos64.c: New file.
* libio/iofopen64.c: New file.
* libio/iofsetpos64.c: New file.
* libio/fileops.c (_IO_file_fopen): Change to use _IO_off64_t.
(_IO_file_attach): Likewise.
(_IO_do_write): Likewise.
(_IO_file_sync): Likewise.
(_IO_file_seek): Likewise.
(_IO_file_seekoff): Likewise. Use _G_stat64.
(_IO_file_fopen64): New function.
(_IO_file_jumps): Initialize showmanyc and imbue.
* libio/genops.c (_IO_default_seekpos): Change to use _IO_fpos64_t.
(_IO_default_seekoff): Likewise.
(_IO_default_seek): Likewise.
(_IO_default_showmanyc, _IO_default_imbue): New functions.
* libio/iofopncook.c (_IO_cookie_seek): Change to use _IO_off64_t.
* libio/iolibio.h: Add prototypes for LFS functions.
* libio/ioseekoff.c: Change to use _IO_fpos64_t.
* libio/ioseekpos.c: Likewise.
* libio/libio.h: Define _IO_fpos64_t and _IO_off64_t.
(_IO_FILE): Move _offset field to end and change type to _IO_off64_t.
(_IO_seekoff, _IO_seekpos): Change prototype.
* libio/libioP.h (_IO_seekoff_t, _IO_seekpos_t, _IO_seek_t): Change
to use _IO_off64_t.
Change prototypes for function from the *ops.c files.
* libio/stdio.h: Add LFS interface definition.
* libio/strops.c (_IO_str_seekoff): Change to use _IO_fpos64_t.
* posix/Makefile (routines): Add pread64 and pwrite64.
* posix/confstr.c: Handle _CS_LFS* requests.
* posix/getconf.c: Handle LFS* requests.
* sysdeps/generic/confname.h: Add _CS_LFS* constants.
* posix/unistd.h: Document _LFS64_LARGEFILE and _LFS64_STDIO.
Define off_t and off64_t appropriately. Change prototypes of
LFS functions.
* posix/sys/types.h: Add LFS types.
* resources/Makefile (routines): Add getrlimit64 and setlimit64.
* resource/sys/resource.h: Change prototypes of LFS functions.
* stdio-common/Makefile (routines): Add tmpfile64.
* stdio-common/tmpfile64.c: New file.
* sysdeps/generic/_G_config.h: Define _G_fpos64_t and _G_off64_t.
Define _G_OPEN64, _G_LSEEK64, _G_FSTAT64.
* sysdeps/unix/sysv/linux/_G_config.h: Likewise.
* sysdeps/generic/bits/resource.h: Add LFS definitions.
* sysdeps/unix/bsd/sun/sunos4/bits/resource.h: Likewise.
* sysdeps/unix/sysv/linux/bits/resource.h: Likewise.
* sysdeps/generic/statfs.h: Use __fsblkcnt_t for some of the fields.
* sysdeps/unix/sysv/linux/bits/statfs.h: Likewise.
* sysdeps/unix/sysv/linux/mips/bits/statfs.h: Likewise.
* sysdeps/generic/types.h: Define LFS types.
* sysdeps/unix/sysv/linux/alpha/bits/types.h: Likewise.
* sysdeps/unix/sysv/linux/bits/types.h: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/bits/types.h: Likewise.
* sysdeps/generic/sys/mman.h: Add LFS definitions.
* sysdeps/unix/sysv/linux/sys/mman.h: Likewise.
* sysdeps/generic/mach/hurd/bits/fcntl.h: Add flock LFS extensions.
* sysdeps/unix/bsd/bits/fcntl.h: Likewise.
* sysdeps/unix/sysv/linux/alpha/bits/fcntl.h: Likewise.
* sysdeps/unix/sysv/linux/bits/fcntl.h: Likewise.
* sysdeps/unix/sysv/linux/mips/bits/fcntl.h: Likewise.
* sysdeps/generic/mach/hurd/bits/stat.h: Add stat LFS extensions.
* sysdeps/unix/bsd/bits/stat.h: Likewise.
* sysdeps/unix/bsd/osf/alpha/bits/stat.h: Likewise.
* sysdeps/unix/sysv/linux/alpha/bits/stat.h: Likewise.
* sysdeps/unix/sysv/linux/bits/stat.h: Likewise.
* sysdeps/unix/sysv/linux/mips/bits/stat.h: Likewise.
* sysdeps/unix/sysv/linux/sparc/bits/stat.h: Likewise.
* sysdeps/unix/sysv/sysv4/i386/bits/stat.h: Likewise.
* sysdeps/unix/sysv/sysv4/solaris2/bits/stat.h: Likewise.
* sysdeps/posix/open64.c: New file.
* sysdeps/stub/fstatfs64.c: New file.
* sysdeps/stub/fxstat64.c: New file.
* sysdeps/stub/getrlimit64.c: New file.
* sysdeps/stub/lseek64.c: New file.
* sysdeps/stub/lxstat64.c: New file.
* sysdeps/stub/open64.c: New file.
* sysdeps/stub/pread64.c: New file.
* sysdeps/stub/pwrite64.c: New file.
* sysdeps/stub/readdir64.c: New file.
* sysdeps/stub/readdir64_r.c: New file.
* sysdeps/stub/setrlimit64.c: New file.
* sysdeps/stub/statfs64.c: New file.
* sysdeps/stub/xstat64.c: New file.
* sysdeps/unix/sysv/linux/llseek.c: Define as __llseek and make
llseek and lseek64 weak aliases.
* sysdeps/unix/sysv/linux/lseek64.c: New file. Empty.
* sysdeps/unix/sysv/linux/alpha/bits/dirent.h: New file.
* sysdeps/unix/sysv/linux/bits/dirent.h: Add LFS definitions.
* sysdeps/posix/tempname.c: Add extra argument to trigger use of
open64.
* sysdeps/stub/tempname.c: Likewise.
* stdio-common/tempnam.c: Call __stdio_gen_tempname with extra
argument.
* stdio-common/tmpfile.c: Likewise.
* stdio-common/tmpnam.c: Likewise.
* stdio-common/tmpnam_r.c: Likewise.
* libio/libioP.h: Add definition ofr showmanyc and imbue callbacks.
* libio/fileops.c (_IO_file_jumps): Initialize showmanyc and imbue.
* libio/iofopncook.c (_IO_cookie_jumps): Likewise.
* libio/iopopen.c (_IO_proc_jumps): Likewise.
* libio/memstream.c (_IO_mem_jumps): Likewise.
* libio/obprintf.c (_IO_obstack_jumps): Likewise.
* libio/vsnprintf.c (_IO_strn_jumps): Likewise.
* libio/strops.c (_IO_str_jumps): Likewise.
* manual/arith.texi: Add a few words why cabs should be used.
* manual/llio.texi: Describe sync, fsync, fdatasync.
Tell about cleanup handlers & fcntl,lseek,write,read,close,open.
* manual/process.texi: Tell about cleanup handlers & system,waitpid,
wait.
* manual/signal.texi: Likewise for pause.
* manual/terminal.texi: Likewise for tcdrain.
* manual/time.texi: Document nanosleep.
* posix/exevp.c: Don't use nested function.
* stdlib/ucontext.h: New file.
* sysdeps/i386/sys/ucontext.h: New file. SysV/i386 API definitions.
* sunrpc/xcrypt.c (hexval): Make a macro for efficiency.
* sysdeps/i386/setjmp.h: Make `here` label local.
* sysdeps/i386/elf/start.S: Define _fp_hw "variable".
* sysdeps/stub/fstatfs.c: Correct warning.
* sysdeps/stub/fxstat.c: Likewise.
* sysdeps/stub/lxstat.c: Likewise.
* sysdeps/unix/sysv/i386/i686/time.S: New file.
1997-10-03 20:56 Jason Merrill <jason@yorick.cygnus.com>
* malloc/obstack.h (obstack_empty_p): New macro.
1997-10-04 17:41 Philip Blundell <Philip.Blundell@pobox.com>
* inet/getnameinfo.c (getnameinfo): Remove spurious `#if INET6'.
1997-09-30 Zack Weinberg <zack@rabi.phys.columbia.edu>
* maint.texi: Add copyright terms for libdb (Sleepycat, Harvard).
Document new --with-binutils switch; delete reference to
--with-gnu-as, --with-gnu-ld, --with-gnu-binutils.
Add to description of --without-fp: a kernel FPU emulator
is adequate (from FAQ)
* INSTALL: Regenerated.
1997-09-30 17:29 Richard Henderson <rth@cygnus.com>
* sysdeps/sparc/sparc32/dl-machine.h (elf_machine_rela): Move
_dl_hwcap declaration to ...
(elf_machine_fixup_plt): ... here.
1997-10-12 04:05:44 +00:00
|
|
|
clog10; clog10f; clog10l;
|
|
|
|
__clog10; __clog10f; __clog10l;
|
1997-06-21 02:59:26 +00:00
|
|
|
conj; conjf; conjl;
|
|
|
|
cpow; cpowf; cpowl;
|
|
|
|
cproj; cprojf; cprojl;
|
|
|
|
creal; crealf; creall;
|
|
|
|
csin; csinf; csinl;
|
|
|
|
csinh; csinhf; csinhl;
|
|
|
|
csqrt; csqrtf; csqrtl;
|
|
|
|
ctan; ctanf; ctanl;
|
|
|
|
ctanh; ctanhf; ctanhl;
|
|
|
|
|
|
|
|
# fp environment functions
|
|
|
|
feclearexcept; fegetenv; fegetexceptflag;
|
|
|
|
fegetround; feholdexcept; feraiseexcept;
|
|
|
|
fesetenv; fesetexceptflag; fesetround;
|
|
|
|
fetestexcept; feupdateenv;
|
|
|
|
|
1997-06-14 23:17:05 +00:00
|
|
|
# functions used in inline functions or macros
|
1998-02-17 15:51:21 +00:00
|
|
|
__finite; __finitef; __finitel;
|
1997-06-14 23:17:05 +00:00
|
|
|
__fpclassify; __fpclassifyf; __fpclassifyl;
|
|
|
|
__signbit; __signbitf; __signbitl;
|
1998-07-02 22:51:40 +00:00
|
|
|
}
|
2000-02-26 01:21:37 +00:00
|
|
|
GLIBC_2.2 {
|
1999-10-31 23:32:56 +00:00
|
|
|
# fp environment functions changes from ISO C99 TR1
|
|
|
|
feclearexcept; fegetenv; fegetexceptflag; feraiseexcept;
|
|
|
|
fesetenv; fesetexceptflag; feupdateenv;
|
2000-02-26 01:21:37 +00:00
|
|
|
|
1999-11-12 17:23:30 +00:00
|
|
|
# fp environment function
|
|
|
|
feenableexcept; fedisableexcept; fegetexcept;
|
|
|
|
}
|
2005-03-28 20:42:53 +00:00
|
|
|
GLIBC_2.4 {
|
|
|
|
# A bug in sysdeps/generic/w_exp2.c kept this from appearing
|
|
|
|
# in GLIBC_2.1 as it should have on platforms using that
|
|
|
|
# implementation file. On others, sysdeps/CPU/Versions now
|
|
|
|
# puts exp2l in GLIBC_2.1, which will override this entry.
|
|
|
|
exp2l;
|
|
|
|
}
|
2011-10-12 15:27:51 +00:00
|
|
|
GLIBC_2.15 {
|
|
|
|
# Optimized -ffinite-math-only entry points
|
|
|
|
__acos_finite; __acosf_finite; __acosl_finite;
|
|
|
|
__acosh_finite; __acoshf_finite; __acoshl_finite;
|
|
|
|
__asin_finite; __asinf_finite; __asinl_finite;
|
|
|
|
__atan2_finite; __atan2f_finite; __atan2l_finite;
|
|
|
|
__atanh_finite; __atanhf_finite; __atanhl_finite;
|
|
|
|
__cosh_finite; __coshf_finite; __coshl_finite;
|
|
|
|
__exp10_finite; __exp10f_finite; __exp10l_finite;
|
|
|
|
__exp2_finite; __exp2f_finite; __exp2l_finite;
|
|
|
|
__fmod_finite; __fmodf_finite; __fmodl_finite;
|
|
|
|
__hypot_finite; __hypotf_finite; __hypotl_finite;
|
|
|
|
__j0_finite; __j0f_finite; __j0l_finite;
|
|
|
|
__y0_finite; __y0f_finite; __y0l_finite;
|
|
|
|
__j1_finite; __j1f_finite; __j1l_finite;
|
|
|
|
__y1_finite; __y1f_finite; __y1l_finite;
|
|
|
|
__jn_finite; __jnf_finite; __jnl_finite;
|
|
|
|
__yn_finite; __ynf_finite; __ynl_finite;
|
|
|
|
__lgamma_r_finite; __lgammaf_r_finite; __lgammal_r_finite;
|
|
|
|
__log_finite; __logf_finite; __logl_finite;
|
|
|
|
__log10_finite; __log10f_finite; __log10l_finite;
|
|
|
|
__log2_finite; __log2f_finite; __log2l_finite;
|
|
|
|
__pow_finite; __powf_finite; __powl_finite;
|
|
|
|
__remainder_finite; __remainderf_finite; __remainderl_finite;
|
|
|
|
__scalb_finite; __scalbf_finite; __scalbl_finite;
|
|
|
|
__sinh_finite; __sinhf_finite; __sinhl_finite;
|
|
|
|
__sqrt_finite; __sqrtf_finite; __sqrtl_finite;
|
|
|
|
__gamma_r_finite; __gammaf_r_finite; __gammal_r_finite;
|
2011-10-16 00:22:59 +00:00
|
|
|
__exp_finite; __expf_finite; __expl_finite;
|
2011-10-12 15:27:51 +00:00
|
|
|
}
|
2013-04-02 11:51:02 +00:00
|
|
|
GLIBC_2.18 {
|
|
|
|
__issignaling; __issignalingf; __issignalingl;
|
|
|
|
}
|
Fix lgamma setting signgam for ISO C (bug 15421).
The lgamma (and likewise lgammaf, lgammal) function wrongly sets the
signgam variable even when building for strict ISO C conformance
(-std=c99 / -std=c11), although the user may define such a variable
and it's only in the implementation namespace for POSIX with XSI
extensions enabled.
Following discussions starting at
<https://sourceware.org/ml/libc-alpha/2013-04/msg00767.html> and
<https://sourceware.org/ml/libc-alpha/2015-10/msg00844.html>, it seems
that the safest approach for fixing this particular issue is for
signgam to become a weak alias for a newly exported symbol __signgam,
with the library functions only setting __signgam, at which point
static linker magic will preserve the alias for newly linked binaries
that refer to the library's signgam rather than defining their own,
while breaking the alias for programs that define their own signgam,
with new symbol versions for lgamma functions and with compat symbols
for existing binaries that set both signgam and __signgam.
This patch implements that approach for the fix. signgam is made into
a weak alias. The four symbols __signgam, lgamma, lgammaf, lgammal
get new symbol versions at version GLIBC_2.23, with the existing
versions of lgamma, lgammaf and lgammal becoming compat symbols.
When the compat versions are built, gamma, gammaf and gammal are
aliases for the compat versions (i.e. always set signgam); this is OK
as they are not ISO C functions, and avoids adding new symbol versions
for them unnecessarily. When the compat versions are not built
(i.e. for static linking and for future glibc ports), gamma, gammaf
and gammal are aliases for the new versions that set __signgam. The
ldbl-opt versions are updated accordingly.
The lgamma wrappers are adjusted so that the same source files,
included from different files with different definitions of
USE_AS_COMPAT, can build either the new versions or the compat
versions. Similar changes are made to the ia64 versions (untested).
Tests are added that the lgamma functions do not interfere with a user
variable called signgam for ISO C, with various choices for the size
of that variable, whether it is initialized, and for static and
dynamic linking. The conformtest whitelist entry is removed as well.
Tested for x86_64, x86, mips64 and powerpc, including looking at
objdump --dynamic-syms output to make sure the expected sets of
symbols were aliases. Also spot-tested that a binary built with old
glibc works properly (i.e. gets signgam set) when run with new glibc.
[BZ #15421]
* sysdeps/ieee754/s_signgam.c (signgam): Rename to __signgam,
initialize with 0 and define as weak alias of __signgam.
* include/math.h [!_ISOMAC] (__signgam): Declare.
* math/Makefile (libm-calls): Add w_lgamma_compat.
(tests): Add test-signgam-uchar, test-signgam-uchar-init,
test-signgam-uint, test-signgam-uint-init, test-signgam-ullong and
test-signgam-ullong-init.
(tests-static): Add test-signgam-uchar-static,
test-signgam-uchar-init-static, test-signgam-uint-static,
test-signgam-uint-init-static, test-signgam-ullong-static and
test-signgam-ullong-init-static.
(CFLAGS-test-signgam-uchar.c): New variable.
(CFLAGS-test-signgam-uchar-init.c): Likewise.
(CFLAGS-test-signgam-uchar-static.c): Likewise.
(CFLAGS-test-signgam-uchar-init-static.c): Likewise.
(CFLAGS-test-signgam-uint.c): Likewise.
(CFLAGS-test-signgam-uint-init.c): Likewise.
(CFLAGS-test-signgam-uint-static.c): Likewise.
(CFLAGS-test-signgam-uint-init-static.c): Likewise.
(CFLAGS-test-signgam-ullong.c): Likewise.
(CFLAGS-test-signgam-ullong-init.c): Likewise.
(CFLAGS-test-signgam-ullong-static.c): Likewise.
(CFLAGS-test-signgam-ullong-init-static.c): Likewise.
* math/Versions (libm): Add GLIBC_2.23.
* math/lgamma-compat.h: New file.
* math/test-signgam-main.c: Likewise.
* math/test-signgam-uchar-init-static.c: Likewise.
* math/test-signgam-uchar-init.c: Likewise.
* math/test-signgam-uchar-static.c: Likewise.
* math/test-signgam-uchar.c: Likewise.
* math/test-signgam-uint-init-static.c: Likewise.
* math/test-signgam-uint-init.c: Likewise.
* math/test-signgam-uint-static.c: Likewise.
* math/test-signgam-uint.c: Likewise.
* math/test-signgam-ullong-init-static.c: Likewise.
* math/test-signgam-ullong-init.c: Likewise.
* math/test-signgam-ullong-static.c: Likewise.
* math/test-signgam-ullong.c: Likewise.
* math/w_lgamma.c: Rename to w_lgamma_main.c and replace by
wrapper of w_lgamma_main.c.
* math/w_lgamma_compat.c: New file.
* math/w_lgamma_compatf.c: Likewise.
* math/w_lgamma_compatl.c: Likewise.
* math/w_lgamma_main.c: New file. Based on w_lgamma.c. Include
<lgamma-compat.h>. Condition contents on [BUILD_LGAMMA]. Support
defining compatibility symbols.
(__lgamma): Change to LGFUNC (__lgamma). Use CALL_LGAMMA.
* math/w_lgammaf.c: Rename to w_lgammaf_main.c and replace by
wrapper of w_lgammaf_main.c.
* math/w_lgammaf_main.c: New file. Based on w_lgammaf.c. Include
<lgamma-compat.h>. Condition contents on [BUILD_LGAMMA]. Support
defining compatibility symbols.
(__lgammaf): Change to LGFUNC (__lgammaf). Use CALL_LGAMMA.
* math/w_lgammal.c: Rename to w_lgammal_main.c and replace by
wrapper of w_lgammal_main.c.
* math/w_lgammal_main.c: New file. Based on w_lgammal.c. Include
<lgamma-compat.h>. Condition contents on [BUILD_LGAMMA]. Support
defining compatibility symbols.
(__lgammal): Change to LGFUNC (__lgammal). Use CALL_LGAMMA.
* sysdeps/ia64/fpu/lgamma-compat.h: New file.
* sysdeps/ia64/fpu/w_lgamma.c: Move to ....
* sysdeps/ia64/fpu/w_lgamma_main.c: ...here. Include
<lgamma-compat.h>.
(__ieee754_lgamma): Change to LGFUNC (lgamma). Use CALL_LGAMMA.
(__ieee754_gamma): Define as alias.
* sysdeps/ia64/fpu/w_lgammaf.c: Move to ....
* sysdeps/ia64/fpu/w_lgammaf_main.c: ...here. Include
<lgamma-compat.h>.
(__ieee754_lgammaf): Change to LGFUNC (lgammaf). Use CALL_LGAMMA.
(__ieee754_gammaf): Define as alias.
* sysdeps/ia64/fpu/w_lgammal.c: Move to ....
* sysdeps/ia64/fpu/w_lgammal_main.c: ...here. Include
<lgamma-compat.h>.
(__ieee754_lgammal): Change to LGFUNC (lgammal). Use CALL_LGAMMA.
(__ieee754_gammal): Define as alias.
* sysdeps/ieee754/ldbl-opt/w_lgamma.c: Move to ....
* sysdeps/ieee754/ldbl-opt/w_lgamma_compat.c: ...here. Include
<math/w_lgamma_compat.c>.
[LONG_DOUBLE_COMPAT(libm, GLIBC_2_0)] (__lgammal_dbl_compat):
Define as alias of __lgamma_compat and use in defining lgammal.
* sysdeps/ieee754/ldbl-opt/w_lgammal.c: Move to ....
* sysdeps/ieee754/ldbl-opt/w_lgamma_compatl.c: ...here. Include
<math/lgamma-compat.h> and <math/w_lgamma_compatl.c>.
(USE_AS_COMPAT): New macro.
(LGAMMA_OLD_VER): Undefine and redefine.
(lgammal): Do not define here.
(gammal): Only define here if [GAMMA_ALIAS].
* conform/linknamespace.pl (@whitelist): Remove signgam.
* sysdeps/nacl/libm.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
2015-11-20 22:49:59 +00:00
|
|
|
GLIBC_2.23 {
|
|
|
|
# The __signgam name must be exported for the signgam weak alias
|
|
|
|
# to work. New symbol versions of lgamma* that set __signgam are
|
|
|
|
# needed to preserve compatibility with old binaries that have a
|
|
|
|
# dynamic symbol for signgam but not __signgam.
|
|
|
|
lgamma; lgammaf; lgammal; __signgam;
|
|
|
|
}
|
2016-06-16 15:51:26 +00:00
|
|
|
GLIBC_2.24 {
|
|
|
|
nextup; nextupf; nextupl;
|
|
|
|
nextdown; nextdownf; nextdownl;
|
|
|
|
}
|
Add fesetexcept.
TS 18661-1 defines an fesetexcept function for setting floating-point
exception flags without the side-effect of causing enabled traps to be
taken.
This patch series implements this function for glibc. The present
patch adds the fallback stub implementation, x86 and x86_64
implementations, documentation, tests and ABI baseline updates. The
remaining patches, some of them untested, add implementations for
other architectures. The implementations generally follow those of
the fesetexceptflag function.
As for fesetexceptflag, the approach taken for architectures where
setting flags causes enabled traps to be taken is to set the flags
(and potentially cause traps) rather than refusing to set the flags
and returning an error. Since ISO C and TS 18661 provide no way to
enable traps, this is formally in accordance with the standards.
The NEWS entry should be considered a placeholder, since this patch
series is intended to be followed by further such series adding other
TS 18661-1 features, so that the NEWS entry would end up looking more
like
* New <fenv.h> features from TS 18661-1:2014 are added to libm: the
fesetexcept, fetestexceptflag, fegetmode and fesetmode functions,
the femode_t type and the FE_DFL_MODE macro.
with hopefully more such entries for other features, rather than
having an entry for a single function in the end.
I believe we have consensus for adding TS 18661-1 interfaces as per
<https://sourceware.org/ml/libc-alpha/2016-06/msg00421.html>.
Tested for x86_64, x86, mips64 (hard float, and soft float to test the
fallback version), arm (hard float) and powerpc (hard float, soft
float and e500).
* math/fesetexcept.c: New file.
* sysdeps/i386/fpu/fesetexcept.c: Likewise.
* sysdeps/x86_64/fpu/fesetexcept.c: Likewise.
* math/fenv.h: Define
__GLIBC_INTERNAL_STARTING_HEADER_IMPLEMENTATION and include
<bits/libc-header-start.h> instead of including <features.h>.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (fesetexcept): New function
declaration.
* manual/arith.texi (fesetexcept): Document function.
* math/Versions (fesetexcept): New libm symbol at version
GLIBC_2.25.
* math/Makefile (libm-support): Add fesetexcept.
(tests): Add test-fesetexcept and test-fesetexcept-traps.
* math/test-fesetexcept.c: New file.
* math/test-fesetexcept-traps.c: Likewise.
* sysdeps/nacl/libm.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
2016-08-16 16:16:10 +00:00
|
|
|
GLIBC_2.25 {
|
Add femode_t functions.
TS 18661-1 defines a type femode_t to represent the set of dynamic
floating-point control modes (such as the rounding mode and trap
enablement modes), and functions fegetmode and fesetmode to manipulate
those modes (without affecting other state such as the raised
exception flags) and a corresponding macro FE_DFL_MODE.
This patch series implements those interfaces for glibc. This first
patch adds the architecture-independent pieces, the x86 and x86_64
implementations, and the <bits/fenv.h> and ABI baseline updates for
all architectures so glibc keeps building and passing the ABI tests on
all architectures. Subsequent patches add the fegetmode and fesetmode
implementations for other architectures.
femode_t is generally an integer type - the same type as fenv_t, or as
the single element of fenv_t where fenv_t is a structure containing a
single integer (or the single relevant element, where it has elements
for both status and control registers) - except where architecture
properties or consistency with the fenv_t implementation indicate
otherwise. FE_DFL_MODE follows FE_DFL_ENV in whether it's a magic
pointer value (-1 cast to const femode_t *), a value that can be
distinguished from valid pointers by its high bits but otherwise
contains a representation of the desired register contents, or a
pointer to a constant variable (the powerpc case; __fe_dfl_mode is
added as an exported constant object, an alias to __fe_dfl_env).
Note that where architectures (that share a register between control
and status bits) gain definitions of new floating-point control or
status bits in future, the implementations of fesetmode for those
architectures may need updating (depending on whether the new bits are
control or status bits and what the implementation does with
previously unknown bits), just like existing implementations of
<fenv.h> functions that take care not to touch reserved bits may need
updating when the set of reserved bits changes. (As any new bits are
outside the scope of ISO C, that's just a quality-of-implementation
issue for supporting them, not a conformance issue.)
As with fenv_t, femode_t should properly include any software DFP
rounding mode (and for both fenv_t and femode_t I'd consider that
fragment of DFP support appropriate for inclusion in glibc even in the
absence of the rest of libdfp; hardware DFP rounding modes should
already be included if the definitions of which bits are status /
control bits are correct).
Tested for x86_64, x86, mips64 (hard float, and soft float to test the
fallback version), arm (hard float) and powerpc (hard float, soft
float and e500). Other architecture versions are untested.
* math/fegetmode.c: New file.
* math/fesetmode.c: Likewise.
* sysdeps/i386/fpu/fegetmode.c: Likewise.
* sysdeps/i386/fpu/fesetmode.c: Likewise.
* sysdeps/x86_64/fpu/fegetmode.c: Likewise.
* sysdeps/x86_64/fpu/fesetmode.c: Likewise.
* math/fenv.h: Update comment on inclusion of <bits/fenv.h>.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (fegetmode): New function
declaration.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (fesetmode): Likewise.
* bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New
typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/aarch64/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/alpha/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/arm/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/hppa/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/ia64/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/m68k/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/microblaze/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/mips/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/nios2/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/powerpc/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (__fe_dfl_mode): New variable
declaration.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/s390/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/sh/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/sparc/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/tile/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/x86/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* manual/arith.texi (FE_DFL_MODE): Document macro.
(fegetmode): Document function.
(fesetmode): Likewise.
* math/Versions (fegetmode): New libm symbol at version
GLIBC_2.25.
(fesetmode): Likewise.
* math/Makefile (libm-support): Add fegetmode and fesetmode.
(tests): Add test-femode and test-femode-traps.
* math/test-femode-traps.c: New file.
* math/test-femode.c: Likewise.
* sysdeps/powerpc/fpu/fenv_const.c (__fe_dfl_mode): Declare as
alias for __fe_dfl_env.
* sysdeps/powerpc/nofpu/fenv_const.c (__fe_dfl_mode): Likewise.
* sysdeps/powerpc/powerpc32/e500/nofpu/fenv_const.c
(__fe_dfl_mode): Likewise.
* sysdeps/powerpc/Versions (__fe_dfl_mode): New libm symbol at
version GLIBC_2.25.
* sysdeps/nacl/libm.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
2016-09-07 16:40:09 +00:00
|
|
|
fesetexcept; fetestexceptflag; fegetmode; fesetmode;
|
Add iseqsig.
TS 18661-1 adds an iseqsig type-generic comparison macro to <math.h>.
This macro is like the == operator except that unordered operands
result in the "invalid" exception and errno being set to EDOM.
This patch implements this macro for glibc. Given the need to set
errno, this is implemented with out-of-line functions __iseqsigf,
__iseqsig and __iseqsigl (of which the last only exists at all if long
double is ABI-distinct from double, so no function aliases or compat
support are needed). The present patch ignores excess precision
issues; I intend to deal with those in a followup patch. (Like
comparison operators, type-generic comparison macros should *not*
convert operands to their semantic types but should preserve excess
range and precision, meaning that for some argument types and values
of FLT_EVAL_METHOD, an underlying function should be called for a
wider type than that of the arguments.)
The underlying functions are implemented with the type-generic
template machinery. Comparing x <= y && x >= y is sufficient in ISO C
to achieve an equality comparison with "invalid" raised for unordered
operands (and the results of those two comparisons can also be used to
tell whether errno needs to be set). However, some architectures have
GCC bugs meaning that unordered comparison instructions are used
instead of ordered ones. Thus, a mechanism is provided for
architectures to use an explicit call to feraiseexcept to raise
exceptions if required. If your architecture has such a bug you
should add a fix-fp-int-compare-invalid.h header for it, with a
comment pointing to the relevant GCC bug report; if such a GCC bug is
fixed, that header's contents should have a __GNUC_PREREQ conditional
added so that the workaround can eventually be removed for that
architecture.
Tested for x86_64, x86, mips64, arm and powerpc.
* math/math.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (iseqsig): New
macro.
* math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(__iseqsig): New declaration.
* math/s_iseqsig_template.c: New file.
* math/Versions (__iseqsigf): New libm symbol at version
GLIBC_2.25.
(__iseqsig): Likewise.
(__iseqsigl): Likewise.
* math/libm-test.inc (iseqsig_test_data): New array.
(iseqsig_test): New function.
(main): Call iseqsig_test.
* math/Makefile (gen-libm-calls): Add s_iseqsigF.
* manual/arith.texi (FP Comparison Functions): Document iseqsig.
* manual/libm-err-tab.pl: Update comment on interfaces without
ulps tabulated.
* sysdeps/generic/fix-fp-int-compare-invalid.h: New file.
* sysdeps/powerpc/fpu/fix-fp-int-compare-invalid.h: Likewise.
* sysdeps/x86/fpu/fix-fp-int-compare-invalid.h: Likewise.
* sysdeps/nacl/libm.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
2016-10-06 22:19:38 +00:00
|
|
|
__iscanonicall; __iseqsigf; __iseqsig; __iseqsigl;
|
Add totalorder, totalorderf, totalorderl.
TS 18661-1 defines totalorder functions implementing the totalOrder
comparison operation from IEEE 754-2008. This patch implements these
functions for glibc, including the type-generic macro in <tgmath.h>.
(The totalordermag functions will be added in a separate patch.)
The description of the totalOrder operation is complicated. However,
for IEEE interchange binary formats and the preferred quiet NaN
convention, what that complicated description means is that you
interpret the representation as a sign-magnitude integer (with -0
coming before +0) and do a <= comparison on that interpretation. For
finite values and infinities the ordering of the sign-magnitude
integers is just the same as the ordering of floating-point values, so
this extends that to all representations. (Different representations
of the same floating-point value - which includes same quantum in the
decimal case - must still be considered equal by this operation, but
that issue doesn't arise for IEEE interchange binary formats.) So the
complications are:
* When MIPS quiet NaN conventions are in use, the representation of
NaNs needs adjusting before making such an integer comparison. This
patch does this adjustment only when both arguments are NaNs, as
there's no need for it if only one is a NaN, and as long as both are
NaNs you can just flip the relevant bits without any problems from
this turning a NaN into an infinity.
* For the m68k version of ldbl-96, where the high mantissa bit is
"don't care" for infinities and NaNs, representations where it
differs must compare the same. Note: although the testcase for this
compiles, I have not actually tested on m68k.
* For ldbl-128ibm, the low part must be ignored when the high part is
NaN, and low parts of +0 and -0 must be considered the same whatever
the high part.
The new tests in libm-test.inc are the first tests there specifying
particular payloads for input NaNs. Separate tests are also added for
the ldbl-96 and ldbl-128ibm special cases where there are different
representations of the same value that must compare equal (which can't
be covered in libm-test.inc as that only specifies values, not
representations).
Tested for x86_64, x86, mips64 and powerpc.
* math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(totalorder): New declaration.
* math/tgmath.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (totalorder):
New macro.
* math/Versions (totalorder): New libm symbol at version
GLIBC_2.25.
(totalorderf): Likewise.
(totalorderl): Likewise.
* math/Makefile (libm-calls): Add s_totalorderF.
* math/gen-libm-test.pl (parse_args): Escape quotes in test name
string.
* math/libm-test.inc (PAYLOAD_DIG): New macro.
(qnan_value_pl): Likewise.
(snan_value_pl): Likewise.
(qnan_value): Define using qnan_value_pl.
(snan_value): Define using snan_value_pl.
(struct test_ff_i_data): Add comment about which tests use this
structure.
(RUN_TEST_ff_b): New macro.
(RUN_TEST_LOOP_ff_b): Likewise.
(totalorder_test_data): New array.
(totalorder_test): New function.
(main): Call totalorder_test.
* math/test-tgmath.c (NCALLS): Increase to 122.
(F(compile_test)): Call totalorder.
(F(totalorder)): New function.
* manual/arith.texi (FP Comparison Functions): Document
totalorder, totalorderf and totalorderl.
* manual/libm-err-tab.pl: Update comment on interfaces without
ulps tabulated.
* sysdeps/ieee754/dbl-64/s_totalorder.c: New file.
* sysdeps/ieee754/dbl-64/wordsize-64/s_totalorder.c: Likewise.
* sysdeps/ieee754/flt-32/s_totalorderf.c: Likewise.
* sysdeps/ieee754/ldbl-128/s_totalorderl.c: Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_totalorderl.c: Likewise.
* sysdeps/ieee754/ldbl-96/s_totalorderl.c: Likewise.
* sysdeps/ieee754/ldbl-opt/nldbl-totalorder.c: Likewise.
* sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add
totalorder.
(CFLAGS-nldbl-totalorder.c): New variable.
* sysdeps/ieee754/ldbl-128ibm/test-totalorderl-ldbl-128ibm.c: New
file.
* sysdeps/ieee754/ldbl-128ibm/Makefile [$(subdir) = math] (tests):
Add test-totalorderl-ldbl-128ibm.
* sysdeps/ieee754/ldbl-96/test-totalorderl-ldbl-96.c: New file.
* sysdeps/ieee754/ldbl-96/Makefile [$(subdir) = math] (tests): Add
test-totalorderl-ldbl-96.
* sysdeps/nacl/libm.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
2016-10-12 01:20:30 +00:00
|
|
|
totalorder; totalorderf; totalorderl;
|
2016-10-15 00:36:48 +00:00
|
|
|
totalordermag; totalordermagf; totalordermagl;
|
2016-10-19 01:49:09 +00:00
|
|
|
getpayload; getpayloadf; getpayloadl;
|
Add canonicalize, canonicalizef, canonicalizel.
TS 18661-1 defines canonicalize functions to produce a canonical
version of a floating-point representation. This patch implements
these functions for glibc.
As with the iscanonical macro, these functions are oriented to the
decimal floating-point case, where some values have both canonical and
noncanonical representations. However, the functions have a return
value that says whether they succeeded in storing a canonical result;
thus, they can fail for the case of an invalid representation (while
still not making any particular choice from among multiple equally
canonical valid representations of the same value). Since no
floating-point formats in glibc actually have noncanonical valid
representations, a type-generic implementation of these functions can
be used that expects iscanonical to return 0 only for invalid
representations. Now that iscanonical is used within libm.so,
libm_hidden_proto / libm_hidden_def are added for __iscanonicall.
The definition of these functions is intended to correspond to a
convertFormat operation to the same floating-point format. Thus, they
convert signaling NaNs to quiet NaNs, raising the "invalid" exception.
Such a conversion "should" produce "the canonical version of that
signaling NaN made quiet".
libm-test.inc is made to check NaN payloads for the output of these
functions, a new feature (at some point manipulation functions such as
fabs and copysign should have tests added that verify payload
preservation for them). As however some architectures may not follow
the recommended practice of preserving NaN payloads when converting a
signaling NaN to quiet, a new math-tests.h macro
SNAN_TESTS_PRESERVE_PAYLOAD is added, and defined to 0 for non-NAN2008
MIPS; any other architectures seeing test failures for lack of payload
preservation in this case should also define this macro to 0. (If any
cases arise where the sign isn't preserved either, those should have a
similar macro added.)
The ldbl-96 and ldbl-128ibm tests of iscanonical are renamed and
adapted to test canonicalizel as well on the same representations.
Tested for x86_64, x86, mips64 and powerpc.
* math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(canonicalize): New declaration.
* math/Versions (canonicalize): New libm symbol at version
GLIBC_2.25.
(canonicalizef): Likewise.
(canonicalizel): Likewise.
* math/Makefile (gen-libm-calls): Add s_canonicalizeF.
* math/s_canonicalize_template.c: New file.
* math/libm-test.inc: Update comment on functions tested and
testing of NaN payloads.
(TEST_NAN_PAYLOAD): New macro.
(NO_TEST_INLINE): Update value.
(XFAIL_TEST): Likewise.
(ERRNO_UNCHANGED): Likewise.
(ERRNO_EDOM): Likewise.
(ERRNO_ERANGE): Likewise.
(IGNORE_RESULT): Likewise.
(NON_FINITE): Likewise.
(TEST_SNAN): Likewise.
(NO_TEST_MATHVEC): Likewise.
(TEST_NAN_PAYLOAD_CANONICALIZE): New macro.
(check_float_internal): Check NaN payloads if TEST_NAN_PAYLOAD.
(struct test_Ffp_b1_data): New type.
(RUN_TEST_Ffp_b1): New macro.
(RUN_TEST_LOOP_Ffp_b1): Likewise.
(canonicalize_test_data): New array.
(canonicalize_test): New function.
(main): Call canonicalize_test.
* manual/arith.texi (FP Bit Twiddling): Document canonicalize,
canonicalizef and canonicalizel.
* manual/libm-err-tab.pl: Update comment on interfaces without
ulps tabulated.
* sysdeps/ieee754/ldbl-opt/nldbl-canonicalize.c: New file.
* sysdeps/ieee754/ldbl-opt/s_canonicalizel.c: Likewise.
* sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add
canonicalize.
(CFLAGS-nldbl-canonicalize.c): New variable.
* sysdeps/ieee754/ldbl-128ibm/test-iscanonical-ldbl-128ibm.c: Move
to ...
* sysdeps/ieee754/ldbl-128ibm/test-canonical-ldbl-128ibm.c:
... here.
(do_test): Also test canonicalizel.
* sysdeps/ieee754/ldbl-128ibm/Makefile (tests): Change
test-iscanonical-ldbl-128ibm to test-canonical-ldbl-128ibm.
* sysdeps/ieee754/ldbl-128ibm/include/bits/iscanonical.h: New
file.
* sysdeps/ieee754/ldbl-128ibm/s_iscanonicall.c (__iscanonicall):
Use libm_hidden_def.
* sysdeps/ieee754/ldbl-96/test-iscanonical-ldbl-96.c: Move to ...
* sysdeps/ieee754/ldbl-96/test-canonical-ldbl-96.c: ... here.
(do_test): Also test canonicalizel.
* sysdeps/ieee754/ldbl-96/Makefile (tests): Change
test-iscanonical-ldbl-96 to test-canonical-ldbl-96.
* sysdeps/ieee754/ldbl-96/include/bits/iscanonical.h: New file.
* sysdeps/ieee754/ldbl-96/s_iscanonicall.c (__iscanonicall): Use
libm_hidden_def.
* sysdeps/generic/math-tests.h (SNAN_TESTS_PRESERVE_PAYLOAD): New
macro.
* sysdeps/mips/math-tests.h [__mips_hard_float && !__mips_nan2008]
(SNAN_TESTS_PRESERVE_PAYLOAD): Likewise.
* sysdeps/nacl/libm.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
2016-10-26 23:14:31 +00:00
|
|
|
canonicalize; canonicalizef; canonicalizel;
|
2016-11-19 00:16:28 +00:00
|
|
|
setpayload; setpayloadf; setpayloadl;
|
2016-11-24 23:56:48 +00:00
|
|
|
setpayloadsig; setpayloadsigf; setpayloadsigl;
|
Add llogb, llogbf, llogbl.
TS 18661-1 defines llogb functions that are like ilogb except that
they return long int instead of int. Corresponding FP_LLOGB* macros
are defined, whose values are required to have the obvious
correspondence to those of the FP_ILOGB* macros.
This patch implements these functions and macros for glibc. llogb
uses the type-generic infrastructure, with an implementation similar
to the wrapper for ilogb but with additional conversion from FP_ILOGB*
to FP_LLOGB*; this approach avoids needing to modify or duplicate any
of the architecture-specific ilogb implementations. Tests are also
based on those for ilogb.
Ideally the llogb functions would alias the ilogb ones when long is
32-bit, but such aliasing requires the associated header declarations
of the different-type alias to be hidden, typically by defining macros
before including the header (see e.g. how
sysdeps/ieee754/dbl-64/wordsize-64/s_llround.c defines lround to
__hidden_lround before including <math.h>). The infrastructure for
type-generic function implementations does not support defining such
macros at present (since C code can't define a macro whose name is
determined by other macros). So this patch leaves them as separate
functions (similar to e.g. scalbln and scalbn being separate in such a
case as well), but with the remapping of FP_ILOGB* to FP_LLOGB*
conditioned out in the case where it would be the identity map.
Tested for x86_64, x86, mips64 and powerpc.
* math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (llogb):
New declaration.
* math/tgmath.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (llogb): New
macro.
* math/math.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (__FP_LONG_MAX):
New macro.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FP_LLOGB0): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FP_LLOGBNAN): Likewise.
* math/Versions (llogb): New libm symbol at version GLIBC_2.25.
(llogbf): Likewise.
(llogbl): Likewise.
* math/Makefile (gen-libm-calls): Add w_llogbF.
(tests): Add test-fp-llogb-constants.
* math/w_llogb_template.c: New file. Based on
math/w_ilogb_template.c.
* math/libm-test.inc (llogb_test_data): New array.
(llogb_test): New function.
(main): Call llogb_test.
* math/test-fp-llogb-constants.c: New file. Based on
math/test-fp-ilogb-constants.c.
* math/test-tgmath-ret.c (llogb): New CHECK_RET_CONST call.
(do_test): Call check_return_llogb.
* math/test-tgmath.c (NCALLS): Increase to 126.
(F(compile_test)): Call llogb.
(F(llogb)): New function.
* manual/math.texi (Exponents and Logarithms): Document llogb,
llogbf, llogbl, FP_LLOGB0 and FP_LLOGBNAN.
* manual/libm-err-tab.pl (@all_functions): Add llogb.
* sysdeps/ieee754/ldbl-opt/nldbl-llogb.c: New file.
* sysdeps/ieee754/ldbl-opt/w_llogbl.c: Likewise.
* sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add llogb.
(CFLAGS-nldbl-llogb.c): New variable.
* sysdeps/nacl/libm.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
2016-12-02 01:42:49 +00:00
|
|
|
llogb; llogbf; llogbl;
|
2016-12-20 00:46:53 +00:00
|
|
|
fmaxmag; fmaxmagf; fmaxmagl; fminmag; fminmagf; fminmagl;
|
Add roundeven, roundevenf, roundevenl.
TS 18661-1 defines roundeven functions that round a floating-point
number to the nearest integer, in that floating-point type, with ties
rounding to even (whereas the round functions round ties away from
zero). As with other such functions, they raise no exceptions apart
from "invalid" for signaling NaNs. There was a previous user request
for this functionality in glibc in
<https://sourceware.org/ml/libc-help/2015-02/msg00005.html>.
This patch implements these functions for glibc. The implementations
use integer bit-manipulation (or roundeven on the high and low parts,
in the IBM long double case). It's possible that there may be faster
approaches on some architectures (in particular, on AArch64 the frintn
instruction should do exactly what's required); I'll leave it to
architecture maintainers or others interested to implement such
architecture-specific versions if desired. (Where architectures have
instructions to round to nearest integer in the current rounding mode,
implementations saving and restoring the rounding mode - and dealing
with exceptions if those instructions generate "inexact" - are also
possible, though their performance depends on the cost of manipulating
exceptions / rounding mode state.)
Tested for x86_64, x86, mips64 and powerpc.
* math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(roundeven): New declaration.
* math/tgmath.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (roundeven): New
macro.
* math/Versions (roundeven): New libm symbol at version
GLIBC_2.25.
(roundevenf): Likewise.
(roundevenl): Likewise.
* math/Makefile (libm-calls): Add s_roundevenF.
* math/libm-test.inc (roundeven_test_data): New array.
(roundeven_test): New function.
(main): Call roundeven_test.
* math/test-tgmath.c (NCALLS): Increase to 134.
(F(compile_test)): Call roundeven.
(F(roundeven)): New function.
* manual/arith.texi (Rounding Functions): Document roundeven,
roundevenf and roundevenl.
* manual/libm-err-tab.pl (@all_functions): Add roundeven.
* include/math.h (roundeven): Use libm_hidden_proto.
* sysdeps/ieee754/dbl-64/s_roundeven.c: New file.
* sysdeps/ieee754/dbl-64/wordsize-64/s_roundeven.c: Likewise.
* sysdeps/ieee754/flt-32/s_roundevenf.c: Likewise.
* sysdeps/ieee754/ldbl-128/s_roundevenl.c: Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_roundevenl.c: Likewise.
* sysdeps/ieee754/ldbl-96/s_roundevenl.c: Likewise.
* sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add
roundeven.
(CFLAGS-nldbl-roundeven.c): New variable.
* sysdeps/ieee754/ldbl-opt/nldbl-roundeven.c: New file.
* sysdeps/nacl/libm.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
2016-12-21 01:48:27 +00:00
|
|
|
roundeven; roundevenf; roundevenl;
|
Add fromfp functions.
TS 18661-1 defines fromfp functions (fromfp, fromfpx, ufromfp,
ufromfpx, and float and long double variants) to convert from
floating-point to an integer type with any signedness and any given
width up to that of intmax_t, in any of the five IEEE rounding modes
(the usual four for binary floating point, plus rounding to nearest
with ties rounding away from zero), with control of whether in-range
non-integer values should result in the "inexact" exception being
raised. This patch implements these functions for glibc.
These implementations are (apart from raising exceptions) pure integer
implementations; it's entirely possible optimized versions could be
devised for some architectures. A common math/fromfp.h header
provides various common helper code that can readily be shared between
the implementations for different types. For each type, the bulk of
the implementation is also shared between the four functions, with
wrappers that define UNSIGNED and INEXACT macros appropriately before
including the main implementation.
As the functions return intmax_t and uintmax_t without math.h being
allowed to expose those typedef names, they are declared using
__intmax_t and __uintmax_t as obtained from <bits/types.h>.
The FP_INT_* rounding direction macros are defined as ascending
integers in the order the names are listed in the TS; I see no
significant value in allowing architectures to vary the values of
them.
The libm-test machinery is duly adapted to handle unsigned int
arguments, and intmax_t and uintmax_t results. Because each test
input is generally tested for four functions, five rounding modes and
several different widths, the libm-test.inc additions are very large.
Thus, the diffs in the body of this message exclude the libm-test.inc
changes, with the full patch being attached gzipped. The bulk of the
new tests were generated (expanded from a test input plus rounding
results and information about where it lies in the relevant interval
between integers, to libm-test tests for all relevant combinations of
function, rounding direction and width) by a script that's included in
the patch as math/gen-fromfp-tests.py (input data
math/gen-fromfp-tests-inputs); as an ad hoc script that's not really
expected to be rerun, it's not very polished, but it's at least
plausibly useful for adding any further tests for these functions in
future. I may split the libm-test tests up by function in future (so
both libm-test.inc and auto-libm-test-out are split into separate
files, and the tests for each function are also built and run
separately), but not for 2.25.
For no obvious reason, adding tgmath tests for the new functions
resulted in -Wuninitialized errors from test-tgmath.c about the
variable i being used uninitialized. Those errors were correct - the
variable is read by the frexp version in test-tgmath.c (where real
frexp would write through that pointer instead of reading it) - but I
don't know why this patch would result in the pre-existing issue being
newly detected. The patch initializes the variable to avoid those
errors.
With these changes, glibc 2.25 should have all the library features
from TS 18661-1 other than the functions that round result to narrower
type (and constant rounding directions, but I'm considering those
mainly a compiler feature not a library one).
Tested for x86_64, x86, mips64 and powerpc.
* math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(fromfp): New declaration.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (fromfpx): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (ufromfp): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (ufromfpx): Likewise.
* math/tgmath.h (__TGMATH_TERNARY_FIRST_REAL_RET_ONLY): New macro.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (fromfp): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (ufromfp): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (fromfpx): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (ufromfpx): Likewise.
* math/math.h: Include <bits/types.h>.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FP_INT_UPWARD): New enum
constant and macro.
(FP_INT_DOWNWARD): Likewise.
(FP_INT_TOWARDZERO): Likewise.
(FP_INT_TONEARESTFROMZERO): Likewise.
(FP_INT_TONEAREST): Likewise.
* math/Versions (fromfp): New libm symbol at version GLIBC_2.25.
(fromfpf): Likewise.
(fromfpl): Likewise.
(ufromfp): Likewise.
(ufromfpf): Likewise.
(ufromfpl): Likewise.
(fromfpx): Likewise.
(fromfpxf): Likewise.
(fromfpxl): Likewise.
(ufromfpx): Likewise.
(ufromfpxf): Likewise.
(ufromfpxl): Likewise.
* math/Makefile (libm-calls): Add s_fromfpF, s_ufromfpF,
s_fromfpxF and s_ufromfpxF.
* math/gen-fromfp-tests.py: New file.
* math/gen-fromfp-tests-inputs: Likewise.
* math/libm-test.inc: Include <stdint.h>
(check_intmax_t): New function.
(check_uintmax_t): Likewise.
(struct test_fiu_M_data): New type.
(struct test_fiu_U_data): Likewise.
(RUN_TEST_fiu_M): New macro.
(RUN_TEST_LOOP_fiu_M): Likewise.
(RUN_TEST_fiu_U): Likewise.
(RUN_TEST_LOOP_fiu_U): Likewise.
(fromfp_test_data): New array.
(fromfp_test): New function.
(fromfpx_test_data): New array.
(fromfpx_test): New function.
(ufromfp_test_data): New array.
(ufromfp_test): New function.
(ufromfpx_test_data): New array.
(ufromfpx_test): New function.
(main): Call fromfp_test, fromfpx_test, ufromfp_test and
ufromfpx_test.
* math/gen-libm-test.pl (parse_args): Handle u, M and U descriptor
characters.
* math/test-tgmath-ret.c: Include <stdint.h>.
(rm): New variable.
(width): Likewise.
(CHECK_RET_CONST_TYPE): Take extra arguments and pass them to
called function.
(CHECK_RET_CONST_FLOAT): Take extra arguments and pass them to
CHECK_RET_CONST_TYPE.
(CHECK_RET_CONST_DOUBLE): Likewise.
(CHECK_RET_CONST_LDOUBLE): Likewise.
(CHECK_RET_CONST): Take extra arguments and pass them to calls
macros.
(fromfp): New CHECK_RET_CONST call.
(ufromfp): Likewise.
(fromfpx): Likewise.
(ufromfpx): Likewise.
(do_test): Call check_return_fromfp, check_return_ufromfp,
check_return_fromfpx and check_return_ufromfpx.
* math/test-tgmath.c: Include <stdint.h>
(NCALLS): Increase to 138.
(F(compile_test)): Initialize i. Call fromfp functions.
(F(fromfp)): New function.
(F(fromfpx)): Likewise.
(F(ufromfp)): Likewise.
(F(ufromfpx)): Likewise.
* manual/arith.texi (Rounding Functions): Document FP_INT_UPWARD,
FP_INT_DOWNWARD, FP_INT_TOWARDZERO, FP_INT_TONEARESTFROMZERO,
FP_INT_TONEAREST, fromfp, fromfpf, fromfpl, ufromfp, ufromfpf,
ufromfpl, fromfpx, fromfpxf, fromfpxl, ufromfpx, ufromfpxf and
ufromfpxl.
* manual/libm-err-tab.pl (@all_functions): Add fromfp, fromfpx,
ufromfp and ufromfpx.
* math/fromfp.h: New file.
* sysdeps/ieee754/dbl-64/s_fromfp.c: Likewise.
* sysdeps/ieee754/dbl-64/s_fromfp_main.c: Likewise.
* sysdeps/ieee754/dbl-64/s_fromfpx.c: Likewise.
* sysdeps/ieee754/dbl-64/s_ufromfp.c: Likewise.
* sysdeps/ieee754/dbl-64/s_ufromfpx.c: Likewise.
* sysdeps/ieee754/flt-32/s_fromfpf.c: Likewise.
* sysdeps/ieee754/flt-32/s_fromfpf_main.c: Likewise.
* sysdeps/ieee754/flt-32/s_fromfpxf.c: Likewise.
* sysdeps/ieee754/flt-32/s_ufromfpf.c: Likewise.
* sysdeps/ieee754/flt-32/s_ufromfpxf.c: Likewise.
* sysdeps/ieee754/ldbl-128/s_fromfpl.c: Likewise.
* sysdeps/ieee754/ldbl-128/s_fromfpl_main.c: Likewise.
* sysdeps/ieee754/ldbl-128/s_fromfpxl.c: Likewise.
* sysdeps/ieee754/ldbl-128/s_ufromfpl.c: Likewise.
* sysdeps/ieee754/ldbl-128/s_ufromfpxl.c: Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_fromfpl.c: Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_fromfpl_main.c: Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_fromfpxl.c: Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_ufromfpl.c: Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_ufromfpxl.c: Likewise.
* sysdeps/ieee754/ldbl-96/s_fromfpl.c: Likewise.
* sysdeps/ieee754/ldbl-96/s_fromfpl_main.c: Likewise.
* sysdeps/ieee754/ldbl-96/s_fromfpxl.c: Likewise.
* sysdeps/ieee754/ldbl-96/s_ufromfpl.c: Likewise.
* sysdeps/ieee754/ldbl-96/s_ufromfpxl.c: Likewise.
* sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add fromfp,
ufromfp, fromfpx and ufromfpx.
(CFLAGS-nldbl-fromfp.c): New variable.
(CFLAGS-nldbl-fromfpx.c): Likewise.
(CFLAGS-nldbl-ufromfp.c): Likewise.
(CFLAGS-nldbl-ufromfpx.c): Likewise.
* sysdeps/ieee754/ldbl-opt/nldbl-compat.h: Include <stdint.h>.
* sysdeps/ieee754/ldbl-opt/nldbl-fromfp.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-fromfpx.c: Likewise.
* sysdeps/ieee754/ldbl-opt/nldbl-ufromfp.c: Likewise.
* sysdeps/ieee754/ldbl-opt/nldbl-ufromfpx.c: Likewise.
* sysdeps/nacl/libm.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
2016-12-31 00:40:59 +00:00
|
|
|
fromfp; fromfpf; fromfpl; ufromfp; ufromfpf; ufromfpl;
|
|
|
|
fromfpx; fromfpxf; fromfpxl; ufromfpx; ufromfpxf; ufromfpxl;
|
Add fesetexcept.
TS 18661-1 defines an fesetexcept function for setting floating-point
exception flags without the side-effect of causing enabled traps to be
taken.
This patch series implements this function for glibc. The present
patch adds the fallback stub implementation, x86 and x86_64
implementations, documentation, tests and ABI baseline updates. The
remaining patches, some of them untested, add implementations for
other architectures. The implementations generally follow those of
the fesetexceptflag function.
As for fesetexceptflag, the approach taken for architectures where
setting flags causes enabled traps to be taken is to set the flags
(and potentially cause traps) rather than refusing to set the flags
and returning an error. Since ISO C and TS 18661 provide no way to
enable traps, this is formally in accordance with the standards.
The NEWS entry should be considered a placeholder, since this patch
series is intended to be followed by further such series adding other
TS 18661-1 features, so that the NEWS entry would end up looking more
like
* New <fenv.h> features from TS 18661-1:2014 are added to libm: the
fesetexcept, fetestexceptflag, fegetmode and fesetmode functions,
the femode_t type and the FE_DFL_MODE macro.
with hopefully more such entries for other features, rather than
having an entry for a single function in the end.
I believe we have consensus for adding TS 18661-1 interfaces as per
<https://sourceware.org/ml/libc-alpha/2016-06/msg00421.html>.
Tested for x86_64, x86, mips64 (hard float, and soft float to test the
fallback version), arm (hard float) and powerpc (hard float, soft
float and e500).
* math/fesetexcept.c: New file.
* sysdeps/i386/fpu/fesetexcept.c: Likewise.
* sysdeps/x86_64/fpu/fesetexcept.c: Likewise.
* math/fenv.h: Define
__GLIBC_INTERNAL_STARTING_HEADER_IMPLEMENTATION and include
<bits/libc-header-start.h> instead of including <features.h>.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (fesetexcept): New function
declaration.
* manual/arith.texi (fesetexcept): Document function.
* math/Versions (fesetexcept): New libm symbol at version
GLIBC_2.25.
* math/Makefile (libm-support): Add fesetexcept.
(tests): Add test-fesetexcept and test-fesetexcept-traps.
* math/test-fesetexcept.c: New file.
* math/test-fesetexcept-traps.c: Likewise.
* sysdeps/nacl/libm.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
2016-08-16 16:16:10 +00:00
|
|
|
}
|
Move some float128 symbol version definitions.
With support for _Float128 functions on platforms where that type has
the same ABI as long double, as well as on platforms where it is
ABI-distinct, those functions will need to be exported from glibc's
shared libraries at appropriate symbol versions in each case.
This patch avoids duplication of lists of symbols to export by moving
the symbols other than __* to math/Versions and stdlib/Versions.
There, they are conditional on <float128-abi.h> defining
FLOAT128_VERSION and a default version of that header is added that
does not define that macro. Enabling the float128 function aliases
will then include adding a sysdeps/ieee754/ldbl-128/float128-abi.h
that defines FLOAT128_VERSION to GLIBC_2.27. Symbols __* remain in
sysdeps/ieee754/float128/Versions; those symbols should be present
only once per floating-point format, not once per type.
Note that if any platforms currently lacking support for a type with
binary128 format get glibc support for such a type in future (whether
only as _Float128, or also as a new long double format), and new libm
functions (present for all types) have been added by then, additional
macros will be needed to allow such functions to get a version of the
form "GLIBC_2.28 if the platform had _Float128 support by then, or the
later version at which that platform had _Float128 support added".
This is not however a preexisting condition, but would have applied
equally to the existing support for _Float128 as an ABI-distinct
type. New all-type libm functions should just be added to the
appropriate symbol version (currently GLIBC_2.27) for all types, with
such special-case handling for _Float128 versions (and _Float64x as
well in future) waiting until someone actually wants to add support
for _Float128 to an existing platform after a release in which that
platform and a post-2.26 libm function had support but that platform
lacked _Float128 support.
Tested with build-many-glibcs.py that installed stripped shared
libraries are unchanged by this patch. Also tested in conjunction
with the remaining changes to enable float128 aliases.
* sysdeps/generic/float128-abi.h: New file.
* sysdeps/ieee754/float128/Versions (FLOAT128_VERSION): Move
non-__prefixed symbols to ....
* math/Versions: ... here. Include <float128-abi.h>.
* stdlib/Versions ... and here. Include <float128-abi.h>
2017-10-16 22:04:42 +00:00
|
|
|
%ifdef FLOAT128_VERSION
|
|
|
|
FLOAT128_VERSION {
|
|
|
|
acosf128;
|
|
|
|
acoshf128;
|
|
|
|
asinf128;
|
|
|
|
asinhf128;
|
|
|
|
atan2f128;
|
|
|
|
atanf128;
|
|
|
|
atanhf128;
|
|
|
|
cabsf128;
|
|
|
|
cacosf128;
|
|
|
|
cacoshf128;
|
|
|
|
canonicalizef128;
|
|
|
|
cargf128;
|
|
|
|
casinf128;
|
|
|
|
casinhf128;
|
|
|
|
catanf128;
|
|
|
|
catanhf128;
|
|
|
|
cbrtf128;
|
|
|
|
ccosf128;
|
|
|
|
ccoshf128;
|
|
|
|
ceilf128;
|
|
|
|
cexpf128;
|
|
|
|
cimagf128;
|
|
|
|
clog10f128;
|
|
|
|
clogf128;
|
|
|
|
conjf128;
|
|
|
|
copysignf128;
|
|
|
|
cosf128;
|
|
|
|
coshf128;
|
|
|
|
cpowf128;
|
|
|
|
cprojf128;
|
|
|
|
crealf128;
|
|
|
|
csinf128;
|
|
|
|
csinhf128;
|
|
|
|
csqrtf128;
|
|
|
|
ctanf128;
|
|
|
|
ctanhf128;
|
|
|
|
erfcf128;
|
|
|
|
erff128;
|
|
|
|
exp10f128;
|
|
|
|
exp2f128;
|
|
|
|
expf128;
|
|
|
|
expm1f128;
|
|
|
|
fabsf128;
|
|
|
|
fdimf128;
|
|
|
|
floorf128;
|
|
|
|
fmaf128;
|
|
|
|
fmaxf128;
|
|
|
|
fmaxmagf128;
|
|
|
|
fminf128;
|
|
|
|
fminmagf128;
|
|
|
|
fmodf128;
|
|
|
|
frexpf128;
|
|
|
|
fromfpf128;
|
|
|
|
fromfpxf128;
|
|
|
|
getpayloadf128;
|
|
|
|
hypotf128;
|
|
|
|
ilogbf128;
|
|
|
|
j0f128;
|
|
|
|
j1f128;
|
|
|
|
jnf128;
|
|
|
|
ldexpf128;
|
|
|
|
lgammaf128;
|
|
|
|
lgammaf128_r;
|
|
|
|
llogbf128;
|
|
|
|
llrintf128;
|
|
|
|
llroundf128;
|
|
|
|
log10f128;
|
|
|
|
log1pf128;
|
|
|
|
log2f128;
|
|
|
|
logbf128;
|
|
|
|
logf128;
|
|
|
|
lrintf128;
|
|
|
|
lroundf128;
|
|
|
|
modff128;
|
|
|
|
nanf128;
|
|
|
|
nearbyintf128;
|
|
|
|
nextafterf128;
|
|
|
|
nextdownf128;
|
|
|
|
nextupf128;
|
|
|
|
powf128;
|
|
|
|
remainderf128;
|
|
|
|
remquof128;
|
|
|
|
rintf128;
|
|
|
|
roundevenf128;
|
|
|
|
roundf128;
|
|
|
|
scalblnf128;
|
|
|
|
scalbnf128;
|
|
|
|
setpayloadf128;
|
|
|
|
setpayloadsigf128;
|
|
|
|
sincosf128;
|
|
|
|
sinf128;
|
|
|
|
sinhf128;
|
|
|
|
sqrtf128;
|
|
|
|
tanf128;
|
|
|
|
tanhf128;
|
|
|
|
tgammaf128;
|
|
|
|
totalorderf128;
|
|
|
|
totalordermagf128;
|
|
|
|
truncf128;
|
|
|
|
ufromfpf128;
|
|
|
|
ufromfpxf128;
|
|
|
|
y0f128;
|
|
|
|
y1f128;
|
|
|
|
ynf128;
|
|
|
|
}
|
|
|
|
%endif
|
2017-09-12 11:20:50 +00:00
|
|
|
GLIBC_2.27 {
|
2017-09-13 16:19:51 +00:00
|
|
|
expf; exp2f; logf; log2f; powf;
|
2017-12-06 00:58:03 +00:00
|
|
|
# _Float64x functions, only present for some configurations.
|
Add _Float64x function aliases.
This patch continues filling out TS 18661-3 support by adding *f64x
function aliases on platforms with _Float64x support. (It so happens
the set of such platforms is exactly the same as the set of platforms
with _Float128 support, although on x86_64, x86 and ia32 the _Float64x
format is Intel extended rather than binary128.) The API provided
corresponds exactly to that provided for _Float128, mostly coming from
TS 18661-3. As these functions always alias those for another type
(long double, _Float128 or both), __* function names are not provided,
as in other cases of alias types.
Given the preparation done in previous patches, this one just enables
the feature via Makeconfig and bits/floatn.h, adds symbol versions,
and updates documentation and ABI baselines. The symbol versions are
present unconditionally as GLIBC_2.27 in the relevant Versions files,
as it's OK for those to specify versions for functions that may not be
present in some configurations; no additional complexity is needed
unless in future some configuration gains support for this type that
didn't have such support in 2.27. The Makeconfig additions for ia64
and x86 aren't strictly needed, as those configurations also get
float64x-alias-fcts definitions from
sysdeps/ieee754/float128/Makeconfig, but still seem appropriate given
that _Float64x is not _Float128 for those configurations.
A libm-test-ulps update for x86 is included. This is because
bits/mathinline.h does not have _Float64x support added and for two
functions the use of out-of-line functions results in increased ulps
(ifloat64x shares ulps with ildouble / ifloat128 as appropriate).
Given that we'd like generally to eliminate bits/mathinline.h
optimizations, preferring to have such optimizations in GCC instead,
it seems reasonable not to add such support there for new types. GCC
support for _FloatN / _FloatNx built-in functions is limited, but has
been improved in GCC 8, and at some point I hope the full set of libm
built-in functions in GCC, and other optimizations with
per-floating-type aspects, will be enabled for all _FloatN / _FloatNx
types.
Tested for x86_64 and x86, and with build-many-glibcs.py, with both
GCC 6 and GCC 7.
* sysdeps/ia64/Makeconfig (float64x-alias-fcts): New variable.
* sysdeps/ieee754/float128/Makeconfig (float64x-alias-fcts):
Likewise.
* sysdeps/ieee754/ldbl-128/Makeconfig (float64x-alias-fcts):
Likewise.
* sysdeps/x86/Makeconfig: New file.
* bits/floatn-common.h (__HAVE_FLOAT64X): Remove macro.
(__HAVE_FLOAT64X_LONG_DOUBLE): Likewise.
* bits/floatn.h (__HAVE_FLOAT64X): New macro.
(__HAVE_FLOAT64X_LONG_DOUBLE): Likewise.
* sysdeps/ia64/bits/floatn.h (__HAVE_FLOAT64X): Likewise.
(__HAVE_FLOAT64X_LONG_DOUBLE): Likewise.
* sysdeps/ieee754/ldbl-128/bits/floatn.h (__HAVE_FLOAT64X):
Likewise.
(__HAVE_FLOAT64X_LONG_DOUBLE): Likewise.
* sysdeps/mips/ieee754/bits/floatn.h (__HAVE_FLOAT64X): Likewise.
(__HAVE_FLOAT64X_LONG_DOUBLE): Likewise.
* sysdeps/powerpc/bits/floatn.h (__HAVE_FLOAT64X): Likewise.
(__HAVE_FLOAT64X_LONG_DOUBLE): Likewise.
* sysdeps/x86/bits/floatn.h (__HAVE_FLOAT64X): Likewise.
(__HAVE_FLOAT64X_LONG_DOUBLE): Likewise.
* manual/math.texi (Mathematics): Document support for _Float64x.
* math/Versions (GLIBC_2.27): Add _Float64x functions.
* stdlib/Versions (GLIBC_2.27): Likewise.
* wcsmbs/Versions (GLIBC_2.27): Likewise.
* sysdeps/unix/sysv/linux/aarch64/libc.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libc-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
* sysdeps/i386/fpu/libm-test-ulps: Likewise.
* sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise.
2017-11-27 14:16:47 +00:00
|
|
|
acosf64x;
|
|
|
|
acoshf64x;
|
|
|
|
asinf64x;
|
|
|
|
asinhf64x;
|
|
|
|
atan2f64x;
|
|
|
|
atanf64x;
|
|
|
|
atanhf64x;
|
|
|
|
cabsf64x;
|
|
|
|
cacosf64x;
|
|
|
|
cacoshf64x;
|
|
|
|
canonicalizef64x;
|
|
|
|
cargf64x;
|
|
|
|
casinf64x;
|
|
|
|
casinhf64x;
|
|
|
|
catanf64x;
|
|
|
|
catanhf64x;
|
|
|
|
cbrtf64x;
|
|
|
|
ccosf64x;
|
|
|
|
ccoshf64x;
|
|
|
|
ceilf64x;
|
|
|
|
cexpf64x;
|
|
|
|
cimagf64x;
|
|
|
|
clog10f64x;
|
|
|
|
clogf64x;
|
|
|
|
conjf64x;
|
|
|
|
copysignf64x;
|
|
|
|
cosf64x;
|
|
|
|
coshf64x;
|
|
|
|
cpowf64x;
|
|
|
|
cprojf64x;
|
|
|
|
crealf64x;
|
|
|
|
csinf64x;
|
|
|
|
csinhf64x;
|
|
|
|
csqrtf64x;
|
|
|
|
ctanf64x;
|
|
|
|
ctanhf64x;
|
|
|
|
erfcf64x;
|
|
|
|
erff64x;
|
|
|
|
exp10f64x;
|
|
|
|
exp2f64x;
|
|
|
|
expf64x;
|
|
|
|
expm1f64x;
|
|
|
|
fabsf64x;
|
|
|
|
fdimf64x;
|
|
|
|
floorf64x;
|
|
|
|
fmaf64x;
|
|
|
|
fmaxf64x;
|
|
|
|
fmaxmagf64x;
|
|
|
|
fminf64x;
|
|
|
|
fminmagf64x;
|
|
|
|
fmodf64x;
|
|
|
|
frexpf64x;
|
|
|
|
fromfpf64x;
|
|
|
|
fromfpxf64x;
|
|
|
|
getpayloadf64x;
|
|
|
|
hypotf64x;
|
|
|
|
ilogbf64x;
|
|
|
|
j0f64x;
|
|
|
|
j1f64x;
|
|
|
|
jnf64x;
|
|
|
|
ldexpf64x;
|
|
|
|
lgammaf64x;
|
|
|
|
lgammaf64x_r;
|
|
|
|
llogbf64x;
|
|
|
|
llrintf64x;
|
|
|
|
llroundf64x;
|
|
|
|
log10f64x;
|
|
|
|
log1pf64x;
|
|
|
|
log2f64x;
|
|
|
|
logbf64x;
|
|
|
|
logf64x;
|
|
|
|
lrintf64x;
|
|
|
|
lroundf64x;
|
|
|
|
modff64x;
|
|
|
|
nanf64x;
|
|
|
|
nearbyintf64x;
|
|
|
|
nextafterf64x;
|
|
|
|
nextdownf64x;
|
|
|
|
nextupf64x;
|
|
|
|
powf64x;
|
|
|
|
remainderf64x;
|
|
|
|
remquof64x;
|
|
|
|
rintf64x;
|
|
|
|
roundevenf64x;
|
|
|
|
roundf64x;
|
|
|
|
scalblnf64x;
|
|
|
|
scalbnf64x;
|
|
|
|
setpayloadf64x;
|
|
|
|
setpayloadsigf64x;
|
|
|
|
sincosf64x;
|
|
|
|
sinf64x;
|
|
|
|
sinhf64x;
|
|
|
|
sqrtf64x;
|
|
|
|
tanf64x;
|
|
|
|
tanhf64x;
|
|
|
|
tgammaf64x;
|
|
|
|
totalorderf64x;
|
|
|
|
totalordermagf64x;
|
|
|
|
truncf64x;
|
|
|
|
ufromfpf64x;
|
|
|
|
ufromfpxf64x;
|
|
|
|
y0f64x;
|
|
|
|
y1f64x;
|
|
|
|
ynf64x;
|
2017-12-07 00:48:31 +00:00
|
|
|
# _Float32, _Float64 and _Float32x functions, for all configurations.
|
|
|
|
acosf32; acosf64; acosf32x;
|
|
|
|
acoshf32; acoshf64; acoshf32x;
|
|
|
|
asinf32; asinf64; asinf32x;
|
|
|
|
asinhf32; asinhf64; asinhf32x;
|
|
|
|
atan2f32; atan2f64; atan2f32x;
|
|
|
|
atanf32; atanf64; atanf32x;
|
|
|
|
atanhf32; atanhf64; atanhf32x;
|
|
|
|
cabsf32; cabsf64; cabsf32x;
|
|
|
|
cacosf32; cacosf64; cacosf32x;
|
|
|
|
cacoshf32; cacoshf64; cacoshf32x;
|
|
|
|
canonicalizef32; canonicalizef64; canonicalizef32x;
|
|
|
|
cargf32; cargf64; cargf32x;
|
|
|
|
casinf32; casinf64; casinf32x;
|
|
|
|
casinhf32; casinhf64; casinhf32x;
|
|
|
|
catanf32; catanf64; catanf32x;
|
|
|
|
catanhf32; catanhf64; catanhf32x;
|
|
|
|
cbrtf32; cbrtf64; cbrtf32x;
|
|
|
|
ccosf32; ccosf64; ccosf32x;
|
|
|
|
ccoshf32; ccoshf64; ccoshf32x;
|
|
|
|
ceilf32; ceilf64; ceilf32x;
|
|
|
|
cexpf32; cexpf64; cexpf32x;
|
|
|
|
cimagf32; cimagf64; cimagf32x;
|
|
|
|
clog10f32; clog10f64; clog10f32x;
|
|
|
|
clogf32; clogf64; clogf32x;
|
|
|
|
conjf32; conjf64; conjf32x;
|
|
|
|
copysignf32; copysignf64; copysignf32x;
|
|
|
|
cosf32; cosf64; cosf32x;
|
|
|
|
coshf32; coshf64; coshf32x;
|
|
|
|
cpowf32; cpowf64; cpowf32x;
|
|
|
|
cprojf32; cprojf64; cprojf32x;
|
|
|
|
crealf32; crealf64; crealf32x;
|
|
|
|
csinf32; csinf64; csinf32x;
|
|
|
|
csinhf32; csinhf64; csinhf32x;
|
|
|
|
csqrtf32; csqrtf64; csqrtf32x;
|
|
|
|
ctanf32; ctanf64; ctanf32x;
|
|
|
|
ctanhf32; ctanhf64; ctanhf32x;
|
|
|
|
erfcf32; erfcf64; erfcf32x;
|
|
|
|
erff32; erff64; erff32x;
|
|
|
|
exp10f32; exp10f64; exp10f32x;
|
|
|
|
exp2f32; exp2f64; exp2f32x;
|
|
|
|
expf32; expf64; expf32x;
|
|
|
|
expm1f32; expm1f64; expm1f32x;
|
|
|
|
fabsf32; fabsf64; fabsf32x;
|
|
|
|
fdimf32; fdimf64; fdimf32x;
|
|
|
|
floorf32; floorf64; floorf32x;
|
|
|
|
fmaf32; fmaf64; fmaf32x;
|
|
|
|
fmaxf32; fmaxf64; fmaxf32x;
|
|
|
|
fmaxmagf32; fmaxmagf64; fmaxmagf32x;
|
|
|
|
fminf32; fminf64; fminf32x;
|
|
|
|
fminmagf32; fminmagf64; fminmagf32x;
|
|
|
|
fmodf32; fmodf64; fmodf32x;
|
|
|
|
frexpf32; frexpf64; frexpf32x;
|
|
|
|
fromfpf32; fromfpf64; fromfpf32x;
|
|
|
|
fromfpxf32; fromfpxf64; fromfpxf32x;
|
|
|
|
getpayloadf32; getpayloadf64; getpayloadf32x;
|
|
|
|
hypotf32; hypotf64; hypotf32x;
|
|
|
|
ilogbf32; ilogbf64; ilogbf32x;
|
|
|
|
j0f32; j0f64; j0f32x;
|
|
|
|
j1f32; j1f64; j1f32x;
|
|
|
|
jnf32; jnf64; jnf32x;
|
|
|
|
ldexpf32; ldexpf64; ldexpf32x;
|
|
|
|
lgammaf32; lgammaf64; lgammaf32x;
|
|
|
|
lgammaf32_r; lgammaf64_r; lgammaf32x_r;
|
|
|
|
llogbf32; llogbf64; llogbf32x;
|
|
|
|
llrintf32; llrintf64; llrintf32x;
|
|
|
|
llroundf32; llroundf64; llroundf32x;
|
|
|
|
log10f32; log10f64; log10f32x;
|
|
|
|
log1pf32; log1pf64; log1pf32x;
|
|
|
|
log2f32; log2f64; log2f32x;
|
|
|
|
logbf32; logbf64; logbf32x;
|
|
|
|
logf32; logf64; logf32x;
|
|
|
|
lrintf32; lrintf64; lrintf32x;
|
|
|
|
lroundf32; lroundf64; lroundf32x;
|
|
|
|
modff32; modff64; modff32x;
|
|
|
|
nanf32; nanf64; nanf32x;
|
|
|
|
nearbyintf32; nearbyintf64; nearbyintf32x;
|
|
|
|
nextafterf32; nextafterf64; nextafterf32x;
|
|
|
|
nextdownf32; nextdownf64; nextdownf32x;
|
|
|
|
nextupf32; nextupf64; nextupf32x;
|
|
|
|
powf32; powf64; powf32x;
|
|
|
|
remainderf32; remainderf64; remainderf32x;
|
|
|
|
remquof32; remquof64; remquof32x;
|
|
|
|
rintf32; rintf64; rintf32x;
|
|
|
|
roundevenf32; roundevenf64; roundevenf32x;
|
|
|
|
roundf32; roundf64; roundf32x;
|
|
|
|
scalblnf32; scalblnf64; scalblnf32x;
|
|
|
|
scalbnf32; scalbnf64; scalbnf32x;
|
|
|
|
setpayloadf32; setpayloadf64; setpayloadf32x;
|
|
|
|
setpayloadsigf32; setpayloadsigf64; setpayloadsigf32x;
|
|
|
|
sincosf32; sincosf64; sincosf32x;
|
|
|
|
sinf32; sinf64; sinf32x;
|
|
|
|
sinhf32; sinhf64; sinhf32x;
|
|
|
|
sqrtf32; sqrtf64; sqrtf32x;
|
|
|
|
tanf32; tanf64; tanf32x;
|
|
|
|
tanhf32; tanhf64; tanhf32x;
|
|
|
|
tgammaf32; tgammaf64; tgammaf32x;
|
|
|
|
totalorderf32; totalorderf64; totalorderf32x;
|
|
|
|
totalordermagf32; totalordermagf64; totalordermagf32x;
|
|
|
|
truncf32; truncf64; truncf32x;
|
|
|
|
ufromfpf32; ufromfpf64; ufromfpf32x;
|
|
|
|
ufromfpxf32; ufromfpxf64; ufromfpxf32x;
|
|
|
|
y0f32; y0f64; y0f32x;
|
|
|
|
y1f32; y1f64; y1f32x;
|
|
|
|
ynf32; ynf64; ynf32x;
|
2017-09-12 11:20:50 +00:00
|
|
|
}
|
Add narrowing add functions.
This patch adds the narrowing add functions from TS 18661-1 to glibc's
libm: fadd, faddl, daddl, f32addf64, f32addf32x, f32xaddf64 for all
configurations; f32addf64x, f32addf128, f64addf64x, f64addf128,
f32xaddf64x, f32xaddf128, f64xaddf128 for configurations with
_Float64x and _Float128; __nldbl_daddl for ldbl-opt. As discussed for
the build infrastructure patch, tgmath.h support is deliberately
deferred, and FP_FAST_* macros are not applicable without optimized
function implementations.
Function implementations are added for all relevant pairs of formats
(including certain cases of a format and itself where more than one
type has that format). The main implementations use round-to-odd, or
a trivial computation in the case where both formats are the same or
where the wider format is IBM long double (in which case we don't
attempt to be correctly rounding). The sysdeps/ieee754/soft-fp
implementations use soft-fp, and are used automatically for
configurations without exceptions and rounding modes by virtue of
existing Implies files. As previously discussed, optimized versions
for particular architectures are possible, but not included.
i386 gets a special version of f32xaddf64 to avoid problems with
double rounding (similar to the existing fdim version), since this
function must round just once without an intermediate rounding to long
double. (No such special version is needed for any other function,
because the nontrivial functions use round-to-odd, which does the
intermediate computation with the rounding mode set to round-to-zero,
and double rounding is OK except in round-to-nearest mode, so is OK
for that intermediate round-to-zero computation.) mul and div will
need slightly different special versions for i386 (using round-to-odd
on long double instead of precision control) because of the
possibility of inexact intermediate results in the subnormal range for
double.
To reduce duplication among the different function implementations,
math-narrow.h gets macros CHECK_NARROW_ADD, NARROW_ADD_ROUND_TO_ODD
and NARROW_ADD_TRIVIAL.
In the trivial cases and for any architecture-specific optimized
implementations, the overhead of the errno setting might be
significant, but I think that's best handled through compiler built-in
functions rather than providing separate no-errno versions in glibc
(and likewise there are no __*_finite entry points for these function
provided, __*_finite effectively being no-errno versions at present in
most cases).
Tested for x86_64 and x86, with both GCC 6 and GCC 7. Tested for
mips64 (all three ABIs, both hard and soft float) and powerpc with GCC
7. Tested with build-many-glibcs.py with both GCC 6 and GCC 7.
* math/Makefile (libm-narrow-fns): Add add.
(libm-test-funcs-narrow): Likewise.
* math/Versions (GLIBC_2.28): Add narrowing add functions.
* math/bits/mathcalls-narrow.h (add): Use __MATHCALL_NARROW .
* math/gen-auto-libm-tests.c (test_functions): Add add.
* math/math-narrow.h (CHECK_NARROW_ADD): New macro.
(NARROW_ADD_ROUND_TO_ODD): Likewise.
(NARROW_ADD_TRIVIAL): Likewise.
* sysdeps/ieee754/float128/float128_private.h (__faddl): New
macro.
(__daddl): Likewise.
* sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add fadd and
dadd.
(CFLAGS-nldbl-dadd.c): New variable.
(CFLAGS-nldbl-fadd.c): Likewise.
* sysdeps/ieee754/ldbl-opt/Versions (GLIBC_2.28): Add
__nldbl_daddl.
* sysdeps/ieee754/ldbl-opt/nldbl-compat.h (__nldbl_daddl): New
prototype.
* manual/arith.texi (Misc FP Arithmetic): Document fadd, faddl,
daddl, fMaddfN, fMaddfNx, fMxaddfN and fMxaddfNx.
* math/auto-libm-test-in: Add tests of add.
* math/auto-libm-test-out-narrow-add: New generated file.
* math/libm-test-narrow-add.inc: New file.
* sysdeps/i386/fpu/s_f32xaddf64.c: Likewise.
* sysdeps/ieee754/dbl-64/s_f32xaddf64.c: Likewise.
* sysdeps/ieee754/dbl-64/s_fadd.c: Likewise.
* sysdeps/ieee754/float128/s_f32addf128.c: Likewise.
* sysdeps/ieee754/float128/s_f64addf128.c: Likewise.
* sysdeps/ieee754/float128/s_f64xaddf128.c: Likewise.
* sysdeps/ieee754/ldbl-128/s_daddl.c: Likewise.
* sysdeps/ieee754/ldbl-128/s_f64xaddf128.c: Likewise.
* sysdeps/ieee754/ldbl-128/s_faddl.c: Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_daddl.c: Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_faddl.c: Likewise.
* sysdeps/ieee754/ldbl-96/s_daddl.c: Likewise.
* sysdeps/ieee754/ldbl-96/s_faddl.c: Likewise.
* sysdeps/ieee754/ldbl-opt/nldbl-dadd.c: Likewise.
* sysdeps/ieee754/ldbl-opt/nldbl-fadd.c: Likewise.
* sysdeps/ieee754/soft-fp/s_daddl.c: Likewise.
* sysdeps/ieee754/soft-fp/s_fadd.c: Likewise.
* sysdeps/ieee754/soft-fp/s_faddl.c: Likewise.
* sysdeps/powerpc/fpu/libm-test-ulps: Update.
* sysdeps/mach/hurd/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/riscv/rv64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
2018-02-10 02:08:43 +00:00
|
|
|
GLIBC_2.28 {
|
|
|
|
# Functions not involving _Float64x or _Float128, for all configurations.
|
|
|
|
fadd; faddl; daddl;
|
|
|
|
f32addf32x; f32addf64; f32xaddf64;
|
Add narrowing divide functions.
This patch adds the narrowing divide functions from TS 18661-1 to
glibc's libm: fdiv, fdivl, ddivl, f32divf64, f32divf32x, f32xdivf64
for all configurations; f32divf64x, f32divf128, f64divf64x,
f64divf128, f32xdivf64x, f32xdivf128, f64xdivf128 for configurations
with _Float64x and _Float128; __nldbl_ddivl for ldbl-opt.
The changes are mostly essentially the same as for the other narrowing
functions, so the description of those generally applies to this patch
as well.
Tested for x86_64, x86, mips64 (all three ABIs, both hard and soft
float) and powerpc, and with build-many-glibcs.py.
* math/Makefile (libm-narrow-fns): Add div.
(libm-test-funcs-narrow): Likewise.
* math/Versions (GLIBC_2.28): Add narrowing divide functions.
* math/bits/mathcalls-narrow.h (div): Use __MATHCALL_NARROW.
* math/gen-auto-libm-tests.c (test_functions): Add div.
* math/math-narrow.h (CHECK_NARROW_DIV): New macro.
(NARROW_DIV_ROUND_TO_ODD): Likewise.
(NARROW_DIV_TRIVIAL): Likewise.
* sysdeps/ieee754/float128/float128_private.h (__fdivl): New
macro.
(__ddivl): Likewise.
* sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add fdiv and
ddiv.
(CFLAGS-nldbl-ddiv.c): New variable.
(CFLAGS-nldbl-fdiv.c): Likewise.
* sysdeps/ieee754/ldbl-opt/Versions (GLIBC_2.28): Add
__nldbl_ddivl.
* sysdeps/ieee754/ldbl-opt/nldbl-compat.h (__nldbl_ddivl): New
prototype.
* manual/arith.texi (Misc FP Arithmetic): Document fdiv, fdivl,
ddivl, fMdivfN, fMdivfNx, fMxdivfN and fMxdivfNx.
* math/auto-libm-test-in: Add tests of div.
* math/auto-libm-test-out-narrow-div: New generated file.
* math/libm-test-narrow-div.inc: New file.
* sysdeps/i386/fpu/s_f32xdivf64.c: Likewise.
* sysdeps/ieee754/dbl-64/s_f32xdivf64.c: Likewise.
* sysdeps/ieee754/dbl-64/s_fdiv.c: Likewise.
* sysdeps/ieee754/float128/s_f32divf128.c: Likewise.
* sysdeps/ieee754/float128/s_f64divf128.c: Likewise.
* sysdeps/ieee754/float128/s_f64xdivf128.c: Likewise.
* sysdeps/ieee754/ldbl-128/s_ddivl.c: Likewise.
* sysdeps/ieee754/ldbl-128/s_f64xdivf128.c: Likewise.
* sysdeps/ieee754/ldbl-128/s_fdivl.c: Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_ddivl.c: Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_fdivl.c: Likewise.
* sysdeps/ieee754/ldbl-96/s_ddivl.c: Likewise.
* sysdeps/ieee754/ldbl-96/s_fdivl.c: Likewise.
* sysdeps/ieee754/ldbl-opt/nldbl-ddiv.c: Likewise.
* sysdeps/ieee754/ldbl-opt/nldbl-fdiv.c: Likewise.
* sysdeps/ieee754/soft-fp/s_ddivl.c: Likewise.
* sysdeps/ieee754/soft-fp/s_fdiv.c: Likewise.
* sysdeps/ieee754/soft-fp/s_fdivl.c: Likewise.
* sysdeps/powerpc/fpu/libm-test-ulps: Update.
* sysdeps/mach/hurd/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/riscv/rv64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
2018-05-17 00:40:52 +00:00
|
|
|
fdiv; fdivl; ddivl;
|
|
|
|
f32divf32x; f32divf64; f32xdivf64;
|
Add narrowing multiply functions.
This patch adds the narrowing multiply functions from TS 18661-1 to
glibc's libm: fmul, fmull, dmull, f32mulf64, f32mulf32x, f32xmulf64
for all configurations; f32mulf64x, f32mulf128, f64mulf64x,
f64mulf128, f32xmulf64x, f32xmulf128, f64xmulf128 for configurations
with _Float64x and _Float128; __nldbl_dmull for ldbl-opt.
The changes are mostly essentially the same as for the narrowing add
functions, so the description of those generally applies to this patch
as well. f32xmulf64 for i386 cannot use precision control as used for
add and subtract, because that would result in double rounding for
subnormal results, so that uses round-to-odd with long double
intermediate result instead. The soft-fp support involves adding a
new FP_TRUNC_COOKED since soft-fp multiplication uses cooked inputs
and outputs.
Tested for x86_64, x86, mips64 (all three ABIs, both hard and soft
float) and powerpc, and with build-many-glibcs.py.
* math/Makefile (libm-narrow-fns): Add mul.
(libm-test-funcs-narrow): Likewise.
* math/Versions (GLIBC_2.28): Add narrowing multiply functions.
* math/bits/mathcalls-narrow.h (mul): Use __MATHCALL_NARROW.
* math/gen-auto-libm-tests.c (test_functions): Add mul.
* math/math-narrow.h (CHECK_NARROW_MUL): New macro.
(NARROW_MUL_ROUND_TO_ODD): Likewise.
(NARROW_MUL_TRIVIAL): Likewise.
* soft-fp/op-common.h (FP_TRUNC_COOKED): Likewise.
* sysdeps/ieee754/float128/float128_private.h (__fmull): New
macro.
(__dmull): Likewise.
* sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add fmul and
dmul.
(CFLAGS-nldbl-dmul.c): New variable.
(CFLAGS-nldbl-fmul.c): Likewise.
* sysdeps/ieee754/ldbl-opt/Versions (GLIBC_2.28): Add
__nldbl_dmull.
* sysdeps/ieee754/ldbl-opt/nldbl-compat.h (__nldbl_dmull): New
prototype.
* manual/arith.texi (Misc FP Arithmetic): Document fmul, fmull,
dmull, fMmulfN, fMmulfNx, fMxmulfN and fMxmulfNx.
* math/auto-libm-test-in: Add tests of mul.
* math/auto-libm-test-out-narrow-mul: New generated file.
* math/libm-test-narrow-mul.inc: New file.
* sysdeps/i386/fpu/s_f32xmulf64.c: Likewise.
* sysdeps/ieee754/dbl-64/s_f32xmulf64.c: Likewise.
* sysdeps/ieee754/dbl-64/s_fmul.c: Likewise.
* sysdeps/ieee754/float128/s_f32mulf128.c: Likewise.
* sysdeps/ieee754/float128/s_f64mulf128.c: Likewise.
* sysdeps/ieee754/float128/s_f64xmulf128.c: Likewise.
* sysdeps/ieee754/ldbl-128/s_dmull.c: Likewise.
* sysdeps/ieee754/ldbl-128/s_f64xmulf128.c: Likewise.
* sysdeps/ieee754/ldbl-128/s_fmull.c: Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_dmull.c: Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_fmull.c: Likewise.
* sysdeps/ieee754/ldbl-96/s_dmull.c: Likewise.
* sysdeps/ieee754/ldbl-96/s_fmull.c: Likewise.
* sysdeps/ieee754/ldbl-opt/nldbl-dmul.c: Likewise.
* sysdeps/ieee754/ldbl-opt/nldbl-fmul.c: Likewise.
* sysdeps/ieee754/soft-fp/s_dmull.c: Likewise.
* sysdeps/ieee754/soft-fp/s_fmul.c: Likewise.
* sysdeps/ieee754/soft-fp/s_fmull.c: Likewise.
* sysdeps/powerpc/fpu/libm-test-ulps: Update.
* sysdeps/mach/hurd/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/riscv/rv64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
2018-05-16 00:05:28 +00:00
|
|
|
fmul; fmull; dmull;
|
|
|
|
f32mulf32x; f32mulf64; f32xmulf64;
|
Add narrowing subtract functions.
This patch adds the narrowing subtract functions from TS 18661-1 to
glibc's libm: fsub, fsubl, dsubl, f32subf64, f32subf32x, f32xsubf64
for all configurations; f32subf64x, f32subf128, f64subf64x,
f64subf128, f32xsubf64x, f32xsubf128, f64xsubf128 for configurations
with _Float64x and _Float128; __nldbl_dsubl for ldbl-opt.
The changes are essentially the same as for the narrowing add
functions, so the description of those generally applies to this patch
as well.
Tested for x86_64, x86, mips64 (all three ABIs, both hard and soft
float) and powerpc, and with build-many-glibcs.py.
* math/Makefile (libm-narrow-fns): Add sub.
(libm-test-funcs-narrow): Likewise.
* math/Versions (GLIBC_2.28): Add narrowing subtract functions.
* math/bits/mathcalls-narrow.h (sub): Use __MATHCALL_NARROW.
* math/gen-auto-libm-tests.c (test_functions): Add sub.
* math/math-narrow.h (CHECK_NARROW_SUB): New macro.
(NARROW_SUB_ROUND_TO_ODD): Likewise.
(NARROW_SUB_TRIVIAL): Likewise.
* sysdeps/ieee754/float128/float128_private.h (__fsubl): New
macro.
(__dsubl): Likewise.
* sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add fsub and
dsub.
(CFLAGS-nldbl-dsub.c): New variable.
(CFLAGS-nldbl-fsub.c): Likewise.
* sysdeps/ieee754/ldbl-opt/Versions (GLIBC_2.28): Add
__nldbl_dsubl.
* sysdeps/ieee754/ldbl-opt/nldbl-compat.h (__nldbl_dsubl): New
prototype.
* manual/arith.texi (Misc FP Arithmetic): Document fsub, fsubl,
dsubl, fMsubfN, fMsubfNx, fMxsubfN and fMxsubfNx.
* math/auto-libm-test-in: Add tests of sub.
* math/auto-libm-test-out-narrow-sub: New generated file.
* math/libm-test-narrow-sub.inc: New file.
* sysdeps/i386/fpu/s_f32xsubf64.c: Likewise.
* sysdeps/ieee754/dbl-64/s_f32xsubf64.c: Likewise.
* sysdeps/ieee754/dbl-64/s_fsub.c: Likewise.
* sysdeps/ieee754/float128/s_f32subf128.c: Likewise.
* sysdeps/ieee754/float128/s_f64subf128.c: Likewise.
* sysdeps/ieee754/float128/s_f64xsubf128.c: Likewise.
* sysdeps/ieee754/ldbl-128/s_dsubl.c: Likewise.
* sysdeps/ieee754/ldbl-128/s_f64xsubf128.c: Likewise.
* sysdeps/ieee754/ldbl-128/s_fsubl.c: Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_dsubl.c: Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_fsubl.c: Likewise.
* sysdeps/ieee754/ldbl-96/s_dsubl.c: Likewise.
* sysdeps/ieee754/ldbl-96/s_fsubl.c: Likewise.
* sysdeps/ieee754/ldbl-opt/nldbl-dsub.c: Likewise.
* sysdeps/ieee754/ldbl-opt/nldbl-fsub.c: Likewise.
* sysdeps/ieee754/soft-fp/s_dsubl.c: Likewise.
* sysdeps/ieee754/soft-fp/s_fsub.c: Likewise.
* sysdeps/ieee754/soft-fp/s_fsubl.c: Likewise.
* sysdeps/powerpc/fpu/libm-test-ulps: Update.
* sysdeps/mach/hurd/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/riscv/rv64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
2018-03-20 00:34:52 +00:00
|
|
|
fsub; fsubl; dsubl;
|
|
|
|
f32subf32x; f32subf64; f32xsubf64;
|
Add narrowing add functions.
This patch adds the narrowing add functions from TS 18661-1 to glibc's
libm: fadd, faddl, daddl, f32addf64, f32addf32x, f32xaddf64 for all
configurations; f32addf64x, f32addf128, f64addf64x, f64addf128,
f32xaddf64x, f32xaddf128, f64xaddf128 for configurations with
_Float64x and _Float128; __nldbl_daddl for ldbl-opt. As discussed for
the build infrastructure patch, tgmath.h support is deliberately
deferred, and FP_FAST_* macros are not applicable without optimized
function implementations.
Function implementations are added for all relevant pairs of formats
(including certain cases of a format and itself where more than one
type has that format). The main implementations use round-to-odd, or
a trivial computation in the case where both formats are the same or
where the wider format is IBM long double (in which case we don't
attempt to be correctly rounding). The sysdeps/ieee754/soft-fp
implementations use soft-fp, and are used automatically for
configurations without exceptions and rounding modes by virtue of
existing Implies files. As previously discussed, optimized versions
for particular architectures are possible, but not included.
i386 gets a special version of f32xaddf64 to avoid problems with
double rounding (similar to the existing fdim version), since this
function must round just once without an intermediate rounding to long
double. (No such special version is needed for any other function,
because the nontrivial functions use round-to-odd, which does the
intermediate computation with the rounding mode set to round-to-zero,
and double rounding is OK except in round-to-nearest mode, so is OK
for that intermediate round-to-zero computation.) mul and div will
need slightly different special versions for i386 (using round-to-odd
on long double instead of precision control) because of the
possibility of inexact intermediate results in the subnormal range for
double.
To reduce duplication among the different function implementations,
math-narrow.h gets macros CHECK_NARROW_ADD, NARROW_ADD_ROUND_TO_ODD
and NARROW_ADD_TRIVIAL.
In the trivial cases and for any architecture-specific optimized
implementations, the overhead of the errno setting might be
significant, but I think that's best handled through compiler built-in
functions rather than providing separate no-errno versions in glibc
(and likewise there are no __*_finite entry points for these function
provided, __*_finite effectively being no-errno versions at present in
most cases).
Tested for x86_64 and x86, with both GCC 6 and GCC 7. Tested for
mips64 (all three ABIs, both hard and soft float) and powerpc with GCC
7. Tested with build-many-glibcs.py with both GCC 6 and GCC 7.
* math/Makefile (libm-narrow-fns): Add add.
(libm-test-funcs-narrow): Likewise.
* math/Versions (GLIBC_2.28): Add narrowing add functions.
* math/bits/mathcalls-narrow.h (add): Use __MATHCALL_NARROW .
* math/gen-auto-libm-tests.c (test_functions): Add add.
* math/math-narrow.h (CHECK_NARROW_ADD): New macro.
(NARROW_ADD_ROUND_TO_ODD): Likewise.
(NARROW_ADD_TRIVIAL): Likewise.
* sysdeps/ieee754/float128/float128_private.h (__faddl): New
macro.
(__daddl): Likewise.
* sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add fadd and
dadd.
(CFLAGS-nldbl-dadd.c): New variable.
(CFLAGS-nldbl-fadd.c): Likewise.
* sysdeps/ieee754/ldbl-opt/Versions (GLIBC_2.28): Add
__nldbl_daddl.
* sysdeps/ieee754/ldbl-opt/nldbl-compat.h (__nldbl_daddl): New
prototype.
* manual/arith.texi (Misc FP Arithmetic): Document fadd, faddl,
daddl, fMaddfN, fMaddfNx, fMxaddfN and fMxaddfNx.
* math/auto-libm-test-in: Add tests of add.
* math/auto-libm-test-out-narrow-add: New generated file.
* math/libm-test-narrow-add.inc: New file.
* sysdeps/i386/fpu/s_f32xaddf64.c: Likewise.
* sysdeps/ieee754/dbl-64/s_f32xaddf64.c: Likewise.
* sysdeps/ieee754/dbl-64/s_fadd.c: Likewise.
* sysdeps/ieee754/float128/s_f32addf128.c: Likewise.
* sysdeps/ieee754/float128/s_f64addf128.c: Likewise.
* sysdeps/ieee754/float128/s_f64xaddf128.c: Likewise.
* sysdeps/ieee754/ldbl-128/s_daddl.c: Likewise.
* sysdeps/ieee754/ldbl-128/s_f64xaddf128.c: Likewise.
* sysdeps/ieee754/ldbl-128/s_faddl.c: Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_daddl.c: Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_faddl.c: Likewise.
* sysdeps/ieee754/ldbl-96/s_daddl.c: Likewise.
* sysdeps/ieee754/ldbl-96/s_faddl.c: Likewise.
* sysdeps/ieee754/ldbl-opt/nldbl-dadd.c: Likewise.
* sysdeps/ieee754/ldbl-opt/nldbl-fadd.c: Likewise.
* sysdeps/ieee754/soft-fp/s_daddl.c: Likewise.
* sysdeps/ieee754/soft-fp/s_fadd.c: Likewise.
* sysdeps/ieee754/soft-fp/s_faddl.c: Likewise.
* sysdeps/powerpc/fpu/libm-test-ulps: Update.
* sysdeps/mach/hurd/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/riscv/rv64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
2018-02-10 02:08:43 +00:00
|
|
|
# Functions involving _Float64x or _Float128, for some configurations.
|
|
|
|
f32addf64x; f32addf128;
|
|
|
|
f32xaddf64x; f32xaddf128; f64addf64x; f64addf128;
|
|
|
|
f64xaddf128;
|
Add narrowing divide functions.
This patch adds the narrowing divide functions from TS 18661-1 to
glibc's libm: fdiv, fdivl, ddivl, f32divf64, f32divf32x, f32xdivf64
for all configurations; f32divf64x, f32divf128, f64divf64x,
f64divf128, f32xdivf64x, f32xdivf128, f64xdivf128 for configurations
with _Float64x and _Float128; __nldbl_ddivl for ldbl-opt.
The changes are mostly essentially the same as for the other narrowing
functions, so the description of those generally applies to this patch
as well.
Tested for x86_64, x86, mips64 (all three ABIs, both hard and soft
float) and powerpc, and with build-many-glibcs.py.
* math/Makefile (libm-narrow-fns): Add div.
(libm-test-funcs-narrow): Likewise.
* math/Versions (GLIBC_2.28): Add narrowing divide functions.
* math/bits/mathcalls-narrow.h (div): Use __MATHCALL_NARROW.
* math/gen-auto-libm-tests.c (test_functions): Add div.
* math/math-narrow.h (CHECK_NARROW_DIV): New macro.
(NARROW_DIV_ROUND_TO_ODD): Likewise.
(NARROW_DIV_TRIVIAL): Likewise.
* sysdeps/ieee754/float128/float128_private.h (__fdivl): New
macro.
(__ddivl): Likewise.
* sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add fdiv and
ddiv.
(CFLAGS-nldbl-ddiv.c): New variable.
(CFLAGS-nldbl-fdiv.c): Likewise.
* sysdeps/ieee754/ldbl-opt/Versions (GLIBC_2.28): Add
__nldbl_ddivl.
* sysdeps/ieee754/ldbl-opt/nldbl-compat.h (__nldbl_ddivl): New
prototype.
* manual/arith.texi (Misc FP Arithmetic): Document fdiv, fdivl,
ddivl, fMdivfN, fMdivfNx, fMxdivfN and fMxdivfNx.
* math/auto-libm-test-in: Add tests of div.
* math/auto-libm-test-out-narrow-div: New generated file.
* math/libm-test-narrow-div.inc: New file.
* sysdeps/i386/fpu/s_f32xdivf64.c: Likewise.
* sysdeps/ieee754/dbl-64/s_f32xdivf64.c: Likewise.
* sysdeps/ieee754/dbl-64/s_fdiv.c: Likewise.
* sysdeps/ieee754/float128/s_f32divf128.c: Likewise.
* sysdeps/ieee754/float128/s_f64divf128.c: Likewise.
* sysdeps/ieee754/float128/s_f64xdivf128.c: Likewise.
* sysdeps/ieee754/ldbl-128/s_ddivl.c: Likewise.
* sysdeps/ieee754/ldbl-128/s_f64xdivf128.c: Likewise.
* sysdeps/ieee754/ldbl-128/s_fdivl.c: Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_ddivl.c: Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_fdivl.c: Likewise.
* sysdeps/ieee754/ldbl-96/s_ddivl.c: Likewise.
* sysdeps/ieee754/ldbl-96/s_fdivl.c: Likewise.
* sysdeps/ieee754/ldbl-opt/nldbl-ddiv.c: Likewise.
* sysdeps/ieee754/ldbl-opt/nldbl-fdiv.c: Likewise.
* sysdeps/ieee754/soft-fp/s_ddivl.c: Likewise.
* sysdeps/ieee754/soft-fp/s_fdiv.c: Likewise.
* sysdeps/ieee754/soft-fp/s_fdivl.c: Likewise.
* sysdeps/powerpc/fpu/libm-test-ulps: Update.
* sysdeps/mach/hurd/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/riscv/rv64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
2018-05-17 00:40:52 +00:00
|
|
|
f32divf64x; f32divf128;
|
|
|
|
f32xdivf64x; f32xdivf128; f64divf64x; f64divf128;
|
|
|
|
f64xdivf128;
|
Add narrowing multiply functions.
This patch adds the narrowing multiply functions from TS 18661-1 to
glibc's libm: fmul, fmull, dmull, f32mulf64, f32mulf32x, f32xmulf64
for all configurations; f32mulf64x, f32mulf128, f64mulf64x,
f64mulf128, f32xmulf64x, f32xmulf128, f64xmulf128 for configurations
with _Float64x and _Float128; __nldbl_dmull for ldbl-opt.
The changes are mostly essentially the same as for the narrowing add
functions, so the description of those generally applies to this patch
as well. f32xmulf64 for i386 cannot use precision control as used for
add and subtract, because that would result in double rounding for
subnormal results, so that uses round-to-odd with long double
intermediate result instead. The soft-fp support involves adding a
new FP_TRUNC_COOKED since soft-fp multiplication uses cooked inputs
and outputs.
Tested for x86_64, x86, mips64 (all three ABIs, both hard and soft
float) and powerpc, and with build-many-glibcs.py.
* math/Makefile (libm-narrow-fns): Add mul.
(libm-test-funcs-narrow): Likewise.
* math/Versions (GLIBC_2.28): Add narrowing multiply functions.
* math/bits/mathcalls-narrow.h (mul): Use __MATHCALL_NARROW.
* math/gen-auto-libm-tests.c (test_functions): Add mul.
* math/math-narrow.h (CHECK_NARROW_MUL): New macro.
(NARROW_MUL_ROUND_TO_ODD): Likewise.
(NARROW_MUL_TRIVIAL): Likewise.
* soft-fp/op-common.h (FP_TRUNC_COOKED): Likewise.
* sysdeps/ieee754/float128/float128_private.h (__fmull): New
macro.
(__dmull): Likewise.
* sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add fmul and
dmul.
(CFLAGS-nldbl-dmul.c): New variable.
(CFLAGS-nldbl-fmul.c): Likewise.
* sysdeps/ieee754/ldbl-opt/Versions (GLIBC_2.28): Add
__nldbl_dmull.
* sysdeps/ieee754/ldbl-opt/nldbl-compat.h (__nldbl_dmull): New
prototype.
* manual/arith.texi (Misc FP Arithmetic): Document fmul, fmull,
dmull, fMmulfN, fMmulfNx, fMxmulfN and fMxmulfNx.
* math/auto-libm-test-in: Add tests of mul.
* math/auto-libm-test-out-narrow-mul: New generated file.
* math/libm-test-narrow-mul.inc: New file.
* sysdeps/i386/fpu/s_f32xmulf64.c: Likewise.
* sysdeps/ieee754/dbl-64/s_f32xmulf64.c: Likewise.
* sysdeps/ieee754/dbl-64/s_fmul.c: Likewise.
* sysdeps/ieee754/float128/s_f32mulf128.c: Likewise.
* sysdeps/ieee754/float128/s_f64mulf128.c: Likewise.
* sysdeps/ieee754/float128/s_f64xmulf128.c: Likewise.
* sysdeps/ieee754/ldbl-128/s_dmull.c: Likewise.
* sysdeps/ieee754/ldbl-128/s_f64xmulf128.c: Likewise.
* sysdeps/ieee754/ldbl-128/s_fmull.c: Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_dmull.c: Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_fmull.c: Likewise.
* sysdeps/ieee754/ldbl-96/s_dmull.c: Likewise.
* sysdeps/ieee754/ldbl-96/s_fmull.c: Likewise.
* sysdeps/ieee754/ldbl-opt/nldbl-dmul.c: Likewise.
* sysdeps/ieee754/ldbl-opt/nldbl-fmul.c: Likewise.
* sysdeps/ieee754/soft-fp/s_dmull.c: Likewise.
* sysdeps/ieee754/soft-fp/s_fmul.c: Likewise.
* sysdeps/ieee754/soft-fp/s_fmull.c: Likewise.
* sysdeps/powerpc/fpu/libm-test-ulps: Update.
* sysdeps/mach/hurd/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/riscv/rv64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
2018-05-16 00:05:28 +00:00
|
|
|
f32mulf64x; f32mulf128;
|
|
|
|
f32xmulf64x; f32xmulf128; f64mulf64x; f64mulf128;
|
|
|
|
f64xmulf128;
|
Add narrowing subtract functions.
This patch adds the narrowing subtract functions from TS 18661-1 to
glibc's libm: fsub, fsubl, dsubl, f32subf64, f32subf32x, f32xsubf64
for all configurations; f32subf64x, f32subf128, f64subf64x,
f64subf128, f32xsubf64x, f32xsubf128, f64xsubf128 for configurations
with _Float64x and _Float128; __nldbl_dsubl for ldbl-opt.
The changes are essentially the same as for the narrowing add
functions, so the description of those generally applies to this patch
as well.
Tested for x86_64, x86, mips64 (all three ABIs, both hard and soft
float) and powerpc, and with build-many-glibcs.py.
* math/Makefile (libm-narrow-fns): Add sub.
(libm-test-funcs-narrow): Likewise.
* math/Versions (GLIBC_2.28): Add narrowing subtract functions.
* math/bits/mathcalls-narrow.h (sub): Use __MATHCALL_NARROW.
* math/gen-auto-libm-tests.c (test_functions): Add sub.
* math/math-narrow.h (CHECK_NARROW_SUB): New macro.
(NARROW_SUB_ROUND_TO_ODD): Likewise.
(NARROW_SUB_TRIVIAL): Likewise.
* sysdeps/ieee754/float128/float128_private.h (__fsubl): New
macro.
(__dsubl): Likewise.
* sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add fsub and
dsub.
(CFLAGS-nldbl-dsub.c): New variable.
(CFLAGS-nldbl-fsub.c): Likewise.
* sysdeps/ieee754/ldbl-opt/Versions (GLIBC_2.28): Add
__nldbl_dsubl.
* sysdeps/ieee754/ldbl-opt/nldbl-compat.h (__nldbl_dsubl): New
prototype.
* manual/arith.texi (Misc FP Arithmetic): Document fsub, fsubl,
dsubl, fMsubfN, fMsubfNx, fMxsubfN and fMxsubfNx.
* math/auto-libm-test-in: Add tests of sub.
* math/auto-libm-test-out-narrow-sub: New generated file.
* math/libm-test-narrow-sub.inc: New file.
* sysdeps/i386/fpu/s_f32xsubf64.c: Likewise.
* sysdeps/ieee754/dbl-64/s_f32xsubf64.c: Likewise.
* sysdeps/ieee754/dbl-64/s_fsub.c: Likewise.
* sysdeps/ieee754/float128/s_f32subf128.c: Likewise.
* sysdeps/ieee754/float128/s_f64subf128.c: Likewise.
* sysdeps/ieee754/float128/s_f64xsubf128.c: Likewise.
* sysdeps/ieee754/ldbl-128/s_dsubl.c: Likewise.
* sysdeps/ieee754/ldbl-128/s_f64xsubf128.c: Likewise.
* sysdeps/ieee754/ldbl-128/s_fsubl.c: Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_dsubl.c: Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_fsubl.c: Likewise.
* sysdeps/ieee754/ldbl-96/s_dsubl.c: Likewise.
* sysdeps/ieee754/ldbl-96/s_fsubl.c: Likewise.
* sysdeps/ieee754/ldbl-opt/nldbl-dsub.c: Likewise.
* sysdeps/ieee754/ldbl-opt/nldbl-fsub.c: Likewise.
* sysdeps/ieee754/soft-fp/s_dsubl.c: Likewise.
* sysdeps/ieee754/soft-fp/s_fsub.c: Likewise.
* sysdeps/ieee754/soft-fp/s_fsubl.c: Likewise.
* sysdeps/powerpc/fpu/libm-test-ulps: Update.
* sysdeps/mach/hurd/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/riscv/rv64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
2018-03-20 00:34:52 +00:00
|
|
|
f32subf64x; f32subf128;
|
|
|
|
f32xsubf64x; f32xsubf128; f64subf64x; f64subf128;
|
|
|
|
f64xsubf128;
|
Add narrowing add functions.
This patch adds the narrowing add functions from TS 18661-1 to glibc's
libm: fadd, faddl, daddl, f32addf64, f32addf32x, f32xaddf64 for all
configurations; f32addf64x, f32addf128, f64addf64x, f64addf128,
f32xaddf64x, f32xaddf128, f64xaddf128 for configurations with
_Float64x and _Float128; __nldbl_daddl for ldbl-opt. As discussed for
the build infrastructure patch, tgmath.h support is deliberately
deferred, and FP_FAST_* macros are not applicable without optimized
function implementations.
Function implementations are added for all relevant pairs of formats
(including certain cases of a format and itself where more than one
type has that format). The main implementations use round-to-odd, or
a trivial computation in the case where both formats are the same or
where the wider format is IBM long double (in which case we don't
attempt to be correctly rounding). The sysdeps/ieee754/soft-fp
implementations use soft-fp, and are used automatically for
configurations without exceptions and rounding modes by virtue of
existing Implies files. As previously discussed, optimized versions
for particular architectures are possible, but not included.
i386 gets a special version of f32xaddf64 to avoid problems with
double rounding (similar to the existing fdim version), since this
function must round just once without an intermediate rounding to long
double. (No such special version is needed for any other function,
because the nontrivial functions use round-to-odd, which does the
intermediate computation with the rounding mode set to round-to-zero,
and double rounding is OK except in round-to-nearest mode, so is OK
for that intermediate round-to-zero computation.) mul and div will
need slightly different special versions for i386 (using round-to-odd
on long double instead of precision control) because of the
possibility of inexact intermediate results in the subnormal range for
double.
To reduce duplication among the different function implementations,
math-narrow.h gets macros CHECK_NARROW_ADD, NARROW_ADD_ROUND_TO_ODD
and NARROW_ADD_TRIVIAL.
In the trivial cases and for any architecture-specific optimized
implementations, the overhead of the errno setting might be
significant, but I think that's best handled through compiler built-in
functions rather than providing separate no-errno versions in glibc
(and likewise there are no __*_finite entry points for these function
provided, __*_finite effectively being no-errno versions at present in
most cases).
Tested for x86_64 and x86, with both GCC 6 and GCC 7. Tested for
mips64 (all three ABIs, both hard and soft float) and powerpc with GCC
7. Tested with build-many-glibcs.py with both GCC 6 and GCC 7.
* math/Makefile (libm-narrow-fns): Add add.
(libm-test-funcs-narrow): Likewise.
* math/Versions (GLIBC_2.28): Add narrowing add functions.
* math/bits/mathcalls-narrow.h (add): Use __MATHCALL_NARROW .
* math/gen-auto-libm-tests.c (test_functions): Add add.
* math/math-narrow.h (CHECK_NARROW_ADD): New macro.
(NARROW_ADD_ROUND_TO_ODD): Likewise.
(NARROW_ADD_TRIVIAL): Likewise.
* sysdeps/ieee754/float128/float128_private.h (__faddl): New
macro.
(__daddl): Likewise.
* sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add fadd and
dadd.
(CFLAGS-nldbl-dadd.c): New variable.
(CFLAGS-nldbl-fadd.c): Likewise.
* sysdeps/ieee754/ldbl-opt/Versions (GLIBC_2.28): Add
__nldbl_daddl.
* sysdeps/ieee754/ldbl-opt/nldbl-compat.h (__nldbl_daddl): New
prototype.
* manual/arith.texi (Misc FP Arithmetic): Document fadd, faddl,
daddl, fMaddfN, fMaddfNx, fMxaddfN and fMxaddfNx.
* math/auto-libm-test-in: Add tests of add.
* math/auto-libm-test-out-narrow-add: New generated file.
* math/libm-test-narrow-add.inc: New file.
* sysdeps/i386/fpu/s_f32xaddf64.c: Likewise.
* sysdeps/ieee754/dbl-64/s_f32xaddf64.c: Likewise.
* sysdeps/ieee754/dbl-64/s_fadd.c: Likewise.
* sysdeps/ieee754/float128/s_f32addf128.c: Likewise.
* sysdeps/ieee754/float128/s_f64addf128.c: Likewise.
* sysdeps/ieee754/float128/s_f64xaddf128.c: Likewise.
* sysdeps/ieee754/ldbl-128/s_daddl.c: Likewise.
* sysdeps/ieee754/ldbl-128/s_f64xaddf128.c: Likewise.
* sysdeps/ieee754/ldbl-128/s_faddl.c: Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_daddl.c: Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_faddl.c: Likewise.
* sysdeps/ieee754/ldbl-96/s_daddl.c: Likewise.
* sysdeps/ieee754/ldbl-96/s_faddl.c: Likewise.
* sysdeps/ieee754/ldbl-opt/nldbl-dadd.c: Likewise.
* sysdeps/ieee754/ldbl-opt/nldbl-fadd.c: Likewise.
* sysdeps/ieee754/soft-fp/s_daddl.c: Likewise.
* sysdeps/ieee754/soft-fp/s_fadd.c: Likewise.
* sysdeps/ieee754/soft-fp/s_faddl.c: Likewise.
* sysdeps/powerpc/fpu/libm-test-ulps: Update.
* sysdeps/mach/hurd/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/riscv/rv64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
2018-02-10 02:08:43 +00:00
|
|
|
}
|
2018-02-22 11:34:40 +00:00
|
|
|
GLIBC_2.29 {
|
|
|
|
# No SVID compatible error handling.
|
2018-06-27 15:33:16 +00:00
|
|
|
exp; exp2; log; log2; pow;
|
2018-02-22 11:34:40 +00:00
|
|
|
}
|
Make totalorder and totalordermag functions take pointer arguments.
The resolution of C floating-point Clarification Request 25
<http://www.open-std.org/jtc1/sc22/wg14/www/docs/n2397.htm#dr_25> is
that the totalorder and totalordermag functions should take pointer
arguments, and this has been adopted in C2X (with const added; note
that the integration of this change into C2X is present in the C
standard git repository but postdates the most recent public PDF
draft).
This patch updates glibc accordingly. As a defect resolution, the API
is changed unconditionally rather than supporting any sort of TS
18661-1 mode for compilation with the old version of the API. There
are compat symbols for existing binaries that pass floating-point
arguments directly. As a consequence of changing to pointer
arguments, there are no longer type-generic macros in tgmath.h for
these functions.
Because of the fairly complicated logic for creating libm function
aliases and determining the set of aliases to create in a given glibc
configuration, rather than duplicating all that in individual source
files to create the versioned and compat symbols, the source files for
the various versions of totalorder functions are set up to redefine
weak_alias before using libm_alias_* macros to create the symbols
required. In turn, this requires creating a separate alias for each
symbol version pointing to the same implementation (see binutils bug
<https://sourceware.org/bugzilla/show_bug.cgi?id=23840>), which is
done automatically using __COUNTER__. (As I noted in
<https://sourceware.org/ml/libc-alpha/2018-10/msg00631.html>, it might
well make sense for glibc's symbol versioning macros to do that alias
creation with __COUNTER__ themselves, which would somewhat simplify
the logic in the totalorder source files.)
It is of course desirable to test the compat symbols. I did this with
the generic libm-test machinery, but didn't wish to duplicate the
actual tables of test inputs and outputs, and thought it risky to
attempt to have a single object file refer to both default and compat
versions of the same function in order to test them together. Thus, I
created libm-test-compat_totalorder.inc and
libm-test-compat_totalordermag.inc which include the generated .c
files (with the processed version of those tables of inputs) from the
non-compat tests, and added appropriate dependencies. I think this
provides sufficient test coverage for the compat symbols without also
needing to make the special ldbl-96 and ldbl-128ibm tests (of
peculiarities relating to the representations of those formats that
can't be covered in the generic tests) run for the compat symbols.
Tests of compat symbols need to be internal tests, meaning _ISOMAC is
not defined. Making some libm-test tests into internal tests showed
up two other issues. GCC diagnoses duplicate macro definitions of
__STDC_* macros, including __STDC_WANT_IEC_60559_TYPES_EXT__; I added
an appropriate conditional and filed
<https://gcc.gnu.org/bugzilla/show_bug.cgi?id=91451> for this issue.
On ia64, include/setjmp.h ends up getting included indirectly from
libm-symbols.h, resulting in conflicting definitions of the STR macro
(also defined in libm-test-driver.c); I renamed the macros in
include/setjmp.h. (It's arguable that we should have common internal
headers used everywhere for stringizing and concatenation macros.)
Tested for x86_64 and x86, and with build-many-glibcs.py.
* math/bits/mathcalls.h
[__GLIBC_USE (IEC_60559_BFP_EXT) || __MATH_DECLARING_FLOATN]
(totalorder): Take pointer arguments.
[__GLIBC_USE (IEC_60559_BFP_EXT) || __MATH_DECLARING_FLOATN]
(totalordermag): Likewise.
* manual/arith.texi (totalorder): Likewise.
(totalorderf): Likewise.
(totalorderl): Likewise.
(totalorderfN): Likewise.
(totalorderfNx): Likewise.
(totalordermag): Likewise.
(totalordermagf): Likewise.
(totalordermagl): Likewise.
(totalordermagfN): Likewise.
(totalordermagfNx): Likewise.
* math/tgmath.h (__TGMATH_BINARY_REAL_RET_ONLY): Remove macro.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (totalorder): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (totalordermag): Likewise.
* math/Versions (GLIBC_2.31): Add totalorder, totalorderf,
totalorderl, totalordermag, totalordermagf, totalordermagl,
totalorderf32, totalorderf64, totalorderf32x, totalordermagf32,
totalordermagf64, totalordermagf32x, totalorderf64x,
totalordermagf64x, totalorderf128 and totalordermagf128.
* math/Makefile (libm-test-funcs-noauto): Add compat_totalorder
and compat_totalordermag.
(libm-test-funcs-compat): New variable.
(libm-tests-compat): Likewise.
(tests): Do not include compat tests.
(tests-internal): Add compat tests.
($(foreach t,$(libm-tests-base),
$(objpfx)$(t)-compat_totalorder.o)): Depend
on $(objpfx)libm-test-totalorder.c.
($(foreach t,$(libm-tests-base),
$(objpfx)$(t)-compat_totalordermag.o): Depend on
$(objpfx)libm-test-totalordermag.c.
(tgmath3-macros): Remove totalorder and totalordermag.
* math/libm-test-compat_totalorder.inc: New file.
* math/libm-test-compat_totalordermag.inc: Likewise.
* math/libm-test-driver.c (struct test_ff_i_data): Update comment.
(RUN_TEST_fpfp_b): New macro.
(RUN_TEST_LOOP_fpfp_b): Likewise.
* math/libm-test-totalorder.inc (totalorder_test_data): Use
TEST_fpfp_b.
(totalorder_test): Condition on [!COMPAT_TEST].
(do_test): Likewise.
* math/libm-test-totalordermag.inc (totalordermag_test_data): Use
TEST_fpfp_b.
(totalordermag_test): Condition on [!COMPAT_TEST].
(do_test): Likewise.
* math/gen-tgmath-tests.py (Tests.add_all_tests): Remove
totalorder and totalordermag.
* math/test-tgmath.c (NCALLS): Change to 132.
(F(compile_test)): Do not call totalorder or totalordermag.
(F(totalorder)): Remove.
(F(totalordermag)): Likewise.
* include/float.h (__STDC_WANT_IEC_60559_TYPES_EXT__): Do not
define if [__STDC_WANT_IEC_60559_TYPES_EXT__].
* include/setjmp.h [!_ISOMAC] (STR_HELPER): Rename to
SJSTR_HELPER.
[!_ISOMAC] (STR): Rename to SJSTR. Update call to STR_HELPER.
[!_ISOMAC] (TEST_SIZE): Update call to STR.
[!_ISOMAC] (TEST_ALIGN): Likewise.
[!_ISOMAC] (TEST_OFFSET): Likewise.
* sysdeps/ieee754/dbl-64/s_totalorder.c: Include <shlib-compat.h>
and <first-versions.h>.
(__totalorder): Take pointer arguments. Add symbol versions and
compat symbols.
* sysdeps/ieee754/dbl-64/s_totalordermag.c: Include
<shlib-compat.h> and <first-versions.h>.
(__totalordermag): Take pointer arguments. Add symbol versions
and compat symbols.
* sysdeps/ieee754/dbl-64/wordsize-64/s_totalorder.c: Include
<shlib-compat.h> and <first-versions.h>.
(__totalorder): Take pointer arguments. Add symbol versions and
compat symbols.
* sysdeps/ieee754/dbl-64/wordsize-64/s_totalordermag.c: Include
<shlib-compat.h> and <first-versions.h>.
(__totalordermag): Take pointer arguments. Add symbol versions
and compat symbols.
* sysdeps/ieee754/float128/float128_private.h
(__totalorder_compatl): New macro.
(__totalordermag_compatl): Likewise.
* sysdeps/ieee754/flt-32/s_totalorderf.c: Include <shlib-compat.h>
and <first-versions.h>.
(__totalorderf): Take pointer arguments. Add symbol versions and
compat symbols.
* sysdeps/ieee754/flt-32/s_totalordermagf.c: Include
<shlib-compat.h> and <first-versions.h>.
(__totalordermagf): Take pointer arguments. Add symbol versions
and compat symbols.
* sysdeps/ieee754/ldbl-128/s_totalorderl.c: Include
<shlib-compat.h> and <first-versions.h>.
(__totalorderl): Take pointer arguments. Add symbol versions and
compat symbols.
* sysdeps/ieee754/ldbl-128/s_totalordermagl.c: Include
<shlib-compat.h> and <first-versions.h>.
(__totalordermagl): Take pointer arguments. Add symbol versions
and compat symbols.
* sysdeps/ieee754/ldbl-128ibm/s_totalorderl.c: Include
<shlib-compat.h>.
(__totalorderl): Take pointer arguments. Add symbol versions and
compat symbols.
* sysdeps/ieee754/ldbl-128ibm/s_totalordermagl.c: Include
<shlib-compat.h>.
(__totalordermagl): Take pointer arguments. Add symbol versions
and compat symbols.
* sysdeps/ieee754/ldbl-96/s_totalorderl.c: Include
<shlib-compat.h> and <first-versions.h>.
(__totalorderl): Take pointer arguments. Add symbol versions and
compat symbols.
* sysdeps/ieee754/ldbl-96/s_totalordermagl.c: Include
<shlib-compat.h> and <first-versions.h>.
(__totalordermagl): Take pointer arguments. Add symbol versions
and compat symbols.
* sysdeps/ieee754/ldbl-opt/nldbl-totalorder.c (totalorderl): Take
pointer arguments.
* sysdeps/ieee754/ldbl-opt/nldbl-totalordermag.c (totalordermagl):
Likewise.
* sysdeps/ieee754/ldbl-128ibm/test-totalorderl-ldbl-128ibm.c
(do_test): Update calls to totalorderl and totalordermagl.
* sysdeps/ieee754/ldbl-96/test-totalorderl-ldbl-96.c (do_test):
Update calls to totalorderl and totalordermagl.
* sysdeps/mach/hurd/i386/libm.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/csky/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/be/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/le/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/riscv/rv64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
2019-08-15 15:18:34 +00:00
|
|
|
GLIBC_2.31 {
|
|
|
|
# totalorder changed to take pointer arguments.
|
|
|
|
totalorder; totalorderf; totalorderl;
|
|
|
|
totalordermag; totalordermagf; totalordermagl;
|
|
|
|
totalorderf32; totalorderf64; totalorderf32x;
|
|
|
|
totalordermagf32; totalordermagf64; totalordermagf32x;
|
|
|
|
totalorderf64x;
|
|
|
|
totalordermagf64x;
|
|
|
|
totalorderf128;
|
|
|
|
totalordermagf128;
|
|
|
|
}
|
2020-04-08 22:51:44 +00:00
|
|
|
GLIBC_2.32 {
|
|
|
|
exp10f;
|
|
|
|
}
|
Add narrowing square root functions
This patch adds the narrowing square root functions from TS 18661-1 /
TS 18661-3 / C2X to glibc's libm: fsqrt, fsqrtl, dsqrtl, f32sqrtf64,
f32sqrtf32x, f32xsqrtf64 for all configurations; f32sqrtf64x,
f32sqrtf128, f64sqrtf64x, f64sqrtf128, f32xsqrtf64x, f32xsqrtf128,
f64xsqrtf128 for configurations with _Float64x and _Float128;
__f32sqrtieee128 and __f64sqrtieee128 aliases in the powerpc64le case
(for calls to fsqrtl and dsqrtl when long double is IEEE binary128).
Corresponding tgmath.h macro support is also added.
The changes are mostly similar to those for the other narrowing
functions previously added, so the description of those generally
applies to this patch as well. However, the not-actually-narrowing
cases (where the two types involved in the function have the same
floating-point format) are aliased to sqrt, sqrtl or sqrtf128 rather
than needing a separately built not-actually-narrowing function such
as was needed for add / sub / mul / div. Thus, there is no
__nldbl_dsqrtl name for ldbl-opt because no such name was needed
(whereas the other functions needed such a name since the only other
name for that entry point was e.g. f32xaddf64, not reserved by TS
18661-1); the headers are made to arrange for sqrt to be called in
that case instead.
The DIAG_* calls in sysdeps/ieee754/soft-fp/s_dsqrtl.c are because
they were observed to be needed in GCC 7 testing of
riscv32-linux-gnu-rv32imac-ilp32. The other sysdeps/ieee754/soft-fp/
files added didn't need such DIAG_* in any configuration I tested with
build-many-glibcs.py, but if they do turn out to be needed in more
files with some other configuration / GCC version, they can always be
added there.
I reused the same test inputs in auto-libm-test-in as for
non-narrowing sqrt rather than adding extra or separate inputs for
narrowing sqrt. The tests in libm-test-narrow-sqrt.inc also follow
those for non-narrowing sqrt.
Tested as followed: natively with the full glibc testsuite for x86_64
(GCC 11, 7, 6) and x86 (GCC 11); with build-many-glibcs.py with GCC
11, 7 and 6; cross testing of math/ tests for powerpc64le, powerpc32
hard float, mips64 (all three ABIs, both hard and soft float). The
different GCC versions are to cover the different cases in tgmath.h
and tgmath.h tests properly (GCC 6 has _Float* only as typedefs in
glibc headers, GCC 7 has proper _Float* support, GCC 8 adds
__builtin_tgmath).
2021-09-10 20:56:22 +00:00
|
|
|
GLIBC_2.35 {
|
|
|
|
# Functions not involving _Float64x or _Float128, for all configurations.
|
Add narrowing fma functions
This patch adds the narrowing fused multiply-add functions from TS
18661-1 / TS 18661-3 / C2X to glibc's libm: ffma, ffmal, dfmal,
f32fmaf64, f32fmaf32x, f32xfmaf64 for all configurations; f32fmaf64x,
f32fmaf128, f64fmaf64x, f64fmaf128, f32xfmaf64x, f32xfmaf128,
f64xfmaf128 for configurations with _Float64x and _Float128;
__f32fmaieee128 and __f64fmaieee128 aliases in the powerpc64le case
(for calls to ffmal and dfmal when long double is IEEE binary128).
Corresponding tgmath.h macro support is also added.
The changes are mostly similar to those for the other narrowing
functions previously added, especially that for sqrt, so the
description of those generally applies to this patch as well. As with
sqrt, I reused the same test inputs in auto-libm-test-in as for
non-narrowing fma rather than adding extra or separate inputs for
narrowing fma. The tests in libm-test-narrow-fma.inc also follow
those for non-narrowing fma.
The non-narrowing fma has a known bug (bug 6801) that it does not set
errno on errors (overflow, underflow, Inf * 0, Inf - Inf). Rather
than fixing this or having narrowing fma check for errors when
non-narrowing does not (complicating the cases when narrowing fma can
otherwise be an alias for a non-narrowing function), this patch does
not attempt to check for errors from narrowing fma and set errno; the
CHECK_NARROW_FMA macro is still present, but as a placeholder that
does nothing, and this missing errno setting is considered to be
covered by the existing bug rather than needing a separate open bug.
missing-errno annotations are duly added to many of the
auto-libm-test-in test inputs for fma.
This completes adding all the new functions from TS 18661-1 to glibc,
so will be followed by corresponding stdc-predef.h changes to define
__STDC_IEC_60559_BFP__ and __STDC_IEC_60559_COMPLEX__, as the support
for TS 18661-1 will be at a similar level to that for C standard
floating-point facilities up to C11 (pragmas not implemented, but
library functions done). (There are still further changes to be done
to implement changes to the types of fromfp functions from N2548.)
Tested as followed: natively with the full glibc testsuite for x86_64
(GCC 11, 7, 6) and x86 (GCC 11); with build-many-glibcs.py with GCC
11, 7 and 6; cross testing of math/ tests for powerpc64le, powerpc32
hard float, mips64 (all three ABIs, both hard and soft float). The
different GCC versions are to cover the different cases in tgmath.h
and tgmath.h tests properly (GCC 6 has _Float* only as typedefs in
glibc headers, GCC 7 has proper _Float* support, GCC 8 adds
__builtin_tgmath).
2021-09-22 21:25:31 +00:00
|
|
|
ffma; ffmal; dfmal;
|
|
|
|
f32fmaf32x; f32fmaf64; f32xfmaf64;
|
Add narrowing square root functions
This patch adds the narrowing square root functions from TS 18661-1 /
TS 18661-3 / C2X to glibc's libm: fsqrt, fsqrtl, dsqrtl, f32sqrtf64,
f32sqrtf32x, f32xsqrtf64 for all configurations; f32sqrtf64x,
f32sqrtf128, f64sqrtf64x, f64sqrtf128, f32xsqrtf64x, f32xsqrtf128,
f64xsqrtf128 for configurations with _Float64x and _Float128;
__f32sqrtieee128 and __f64sqrtieee128 aliases in the powerpc64le case
(for calls to fsqrtl and dsqrtl when long double is IEEE binary128).
Corresponding tgmath.h macro support is also added.
The changes are mostly similar to those for the other narrowing
functions previously added, so the description of those generally
applies to this patch as well. However, the not-actually-narrowing
cases (where the two types involved in the function have the same
floating-point format) are aliased to sqrt, sqrtl or sqrtf128 rather
than needing a separately built not-actually-narrowing function such
as was needed for add / sub / mul / div. Thus, there is no
__nldbl_dsqrtl name for ldbl-opt because no such name was needed
(whereas the other functions needed such a name since the only other
name for that entry point was e.g. f32xaddf64, not reserved by TS
18661-1); the headers are made to arrange for sqrt to be called in
that case instead.
The DIAG_* calls in sysdeps/ieee754/soft-fp/s_dsqrtl.c are because
they were observed to be needed in GCC 7 testing of
riscv32-linux-gnu-rv32imac-ilp32. The other sysdeps/ieee754/soft-fp/
files added didn't need such DIAG_* in any configuration I tested with
build-many-glibcs.py, but if they do turn out to be needed in more
files with some other configuration / GCC version, they can always be
added there.
I reused the same test inputs in auto-libm-test-in as for
non-narrowing sqrt rather than adding extra or separate inputs for
narrowing sqrt. The tests in libm-test-narrow-sqrt.inc also follow
those for non-narrowing sqrt.
Tested as followed: natively with the full glibc testsuite for x86_64
(GCC 11, 7, 6) and x86 (GCC 11); with build-many-glibcs.py with GCC
11, 7 and 6; cross testing of math/ tests for powerpc64le, powerpc32
hard float, mips64 (all three ABIs, both hard and soft float). The
different GCC versions are to cover the different cases in tgmath.h
and tgmath.h tests properly (GCC 6 has _Float* only as typedefs in
glibc headers, GCC 7 has proper _Float* support, GCC 8 adds
__builtin_tgmath).
2021-09-10 20:56:22 +00:00
|
|
|
fsqrt; fsqrtl; dsqrtl;
|
|
|
|
f32sqrtf32x; f32sqrtf64; f32xsqrtf64;
|
Add fmaximum, fminimum functions
C2X adds new <math.h> functions for floating-point maximum and
minimum, corresponding to the new operations that were added in IEEE
754-2019 because of concerns about the old operations not being
associative in the presence of signaling NaNs. fmaximum and fminimum
handle NaNs like most <math.h> functions (any NaN argument means the
result is a quiet NaN). fmaximum_num and fminimum_num handle both
quiet and signaling NaNs the way fmax and fmin handle quiet NaNs (if
one argument is a number and the other is a NaN, return the number),
but still raise "invalid" for a signaling NaN argument, making them
exceptions to the normal rule that a function with a floating-point
result raising "invalid" also returns a quiet NaN. fmaximum_mag,
fminimum_mag, fmaximum_mag_num and fminimum_mag_num are corresponding
functions returning the argument with greatest or least absolute
value. All these functions also treat +0 as greater than -0. There
are also corresponding <tgmath.h> type-generic macros.
Add these functions to glibc. The implementations use type-generic
templates based on those for fmax, fmin, fmaxmag and fminmag, and test
inputs are based on those for those functions with appropriate
adjustments to the expected results. The RISC-V maintainers might
wish to add optimized versions of fmaximum_num and fminimum_num (for
float and double), since RISC-V (F extension version 2.2 and later)
provides instructions corresponding to those functions - though it
might be at least as useful to add architecture-independent built-in
functions to GCC and teach the RISC-V back end to expand those
functions inline, which is what you generally want for functions that
can be implemented with a single instruction.
Tested for x86_64 and x86, and with build-many-glibcs.py.
2021-09-28 23:31:35 +00:00
|
|
|
fmaximum; fmaximumf; fmaximuml; fmaximumf32; fmaximumf64; fmaximumf32x;
|
|
|
|
fmaximum_num; fmaximum_numf; fmaximum_numl;
|
|
|
|
fmaximum_numf32; fmaximum_numf64; fmaximum_numf32x;
|
|
|
|
fmaximum_mag; fmaximum_magf; fmaximum_magl;
|
|
|
|
fmaximum_magf32; fmaximum_magf64; fmaximum_magf32x;
|
|
|
|
fmaximum_mag_num; fmaximum_mag_numf; fmaximum_mag_numl;
|
|
|
|
fmaximum_mag_numf32; fmaximum_mag_numf64; fmaximum_mag_numf32x;
|
|
|
|
fminimum; fminimumf; fminimuml; fminimumf32; fminimumf64; fminimumf32x;
|
|
|
|
fminimum_num; fminimum_numf; fminimum_numl;
|
|
|
|
fminimum_numf32; fminimum_numf64; fminimum_numf32x;
|
|
|
|
fminimum_mag; fminimum_magf; fminimum_magl;
|
|
|
|
fminimum_magf32; fminimum_magf64; fminimum_magf32x;
|
|
|
|
fminimum_mag_num; fminimum_mag_numf; fminimum_mag_numl;
|
|
|
|
fminimum_mag_numf32; fminimum_mag_numf64; fminimum_mag_numf32x;
|
Add narrowing square root functions
This patch adds the narrowing square root functions from TS 18661-1 /
TS 18661-3 / C2X to glibc's libm: fsqrt, fsqrtl, dsqrtl, f32sqrtf64,
f32sqrtf32x, f32xsqrtf64 for all configurations; f32sqrtf64x,
f32sqrtf128, f64sqrtf64x, f64sqrtf128, f32xsqrtf64x, f32xsqrtf128,
f64xsqrtf128 for configurations with _Float64x and _Float128;
__f32sqrtieee128 and __f64sqrtieee128 aliases in the powerpc64le case
(for calls to fsqrtl and dsqrtl when long double is IEEE binary128).
Corresponding tgmath.h macro support is also added.
The changes are mostly similar to those for the other narrowing
functions previously added, so the description of those generally
applies to this patch as well. However, the not-actually-narrowing
cases (where the two types involved in the function have the same
floating-point format) are aliased to sqrt, sqrtl or sqrtf128 rather
than needing a separately built not-actually-narrowing function such
as was needed for add / sub / mul / div. Thus, there is no
__nldbl_dsqrtl name for ldbl-opt because no such name was needed
(whereas the other functions needed such a name since the only other
name for that entry point was e.g. f32xaddf64, not reserved by TS
18661-1); the headers are made to arrange for sqrt to be called in
that case instead.
The DIAG_* calls in sysdeps/ieee754/soft-fp/s_dsqrtl.c are because
they were observed to be needed in GCC 7 testing of
riscv32-linux-gnu-rv32imac-ilp32. The other sysdeps/ieee754/soft-fp/
files added didn't need such DIAG_* in any configuration I tested with
build-many-glibcs.py, but if they do turn out to be needed in more
files with some other configuration / GCC version, they can always be
added there.
I reused the same test inputs in auto-libm-test-in as for
non-narrowing sqrt rather than adding extra or separate inputs for
narrowing sqrt. The tests in libm-test-narrow-sqrt.inc also follow
those for non-narrowing sqrt.
Tested as followed: natively with the full glibc testsuite for x86_64
(GCC 11, 7, 6) and x86 (GCC 11); with build-many-glibcs.py with GCC
11, 7 and 6; cross testing of math/ tests for powerpc64le, powerpc32
hard float, mips64 (all three ABIs, both hard and soft float). The
different GCC versions are to cover the different cases in tgmath.h
and tgmath.h tests properly (GCC 6 has _Float* only as typedefs in
glibc headers, GCC 7 has proper _Float* support, GCC 8 adds
__builtin_tgmath).
2021-09-10 20:56:22 +00:00
|
|
|
# Functions involving _Float64x or _Float128, for some configurations.
|
Add narrowing fma functions
This patch adds the narrowing fused multiply-add functions from TS
18661-1 / TS 18661-3 / C2X to glibc's libm: ffma, ffmal, dfmal,
f32fmaf64, f32fmaf32x, f32xfmaf64 for all configurations; f32fmaf64x,
f32fmaf128, f64fmaf64x, f64fmaf128, f32xfmaf64x, f32xfmaf128,
f64xfmaf128 for configurations with _Float64x and _Float128;
__f32fmaieee128 and __f64fmaieee128 aliases in the powerpc64le case
(for calls to ffmal and dfmal when long double is IEEE binary128).
Corresponding tgmath.h macro support is also added.
The changes are mostly similar to those for the other narrowing
functions previously added, especially that for sqrt, so the
description of those generally applies to this patch as well. As with
sqrt, I reused the same test inputs in auto-libm-test-in as for
non-narrowing fma rather than adding extra or separate inputs for
narrowing fma. The tests in libm-test-narrow-fma.inc also follow
those for non-narrowing fma.
The non-narrowing fma has a known bug (bug 6801) that it does not set
errno on errors (overflow, underflow, Inf * 0, Inf - Inf). Rather
than fixing this or having narrowing fma check for errors when
non-narrowing does not (complicating the cases when narrowing fma can
otherwise be an alias for a non-narrowing function), this patch does
not attempt to check for errors from narrowing fma and set errno; the
CHECK_NARROW_FMA macro is still present, but as a placeholder that
does nothing, and this missing errno setting is considered to be
covered by the existing bug rather than needing a separate open bug.
missing-errno annotations are duly added to many of the
auto-libm-test-in test inputs for fma.
This completes adding all the new functions from TS 18661-1 to glibc,
so will be followed by corresponding stdc-predef.h changes to define
__STDC_IEC_60559_BFP__ and __STDC_IEC_60559_COMPLEX__, as the support
for TS 18661-1 will be at a similar level to that for C standard
floating-point facilities up to C11 (pragmas not implemented, but
library functions done). (There are still further changes to be done
to implement changes to the types of fromfp functions from N2548.)
Tested as followed: natively with the full glibc testsuite for x86_64
(GCC 11, 7, 6) and x86 (GCC 11); with build-many-glibcs.py with GCC
11, 7 and 6; cross testing of math/ tests for powerpc64le, powerpc32
hard float, mips64 (all three ABIs, both hard and soft float). The
different GCC versions are to cover the different cases in tgmath.h
and tgmath.h tests properly (GCC 6 has _Float* only as typedefs in
glibc headers, GCC 7 has proper _Float* support, GCC 8 adds
__builtin_tgmath).
2021-09-22 21:25:31 +00:00
|
|
|
f32fmaf64x; f32fmaf128;
|
|
|
|
f32xfmaf64x; f32xfmaf128; f64fmaf64x; f64fmaf128;
|
|
|
|
f64xfmaf128;
|
Add narrowing square root functions
This patch adds the narrowing square root functions from TS 18661-1 /
TS 18661-3 / C2X to glibc's libm: fsqrt, fsqrtl, dsqrtl, f32sqrtf64,
f32sqrtf32x, f32xsqrtf64 for all configurations; f32sqrtf64x,
f32sqrtf128, f64sqrtf64x, f64sqrtf128, f32xsqrtf64x, f32xsqrtf128,
f64xsqrtf128 for configurations with _Float64x and _Float128;
__f32sqrtieee128 and __f64sqrtieee128 aliases in the powerpc64le case
(for calls to fsqrtl and dsqrtl when long double is IEEE binary128).
Corresponding tgmath.h macro support is also added.
The changes are mostly similar to those for the other narrowing
functions previously added, so the description of those generally
applies to this patch as well. However, the not-actually-narrowing
cases (where the two types involved in the function have the same
floating-point format) are aliased to sqrt, sqrtl or sqrtf128 rather
than needing a separately built not-actually-narrowing function such
as was needed for add / sub / mul / div. Thus, there is no
__nldbl_dsqrtl name for ldbl-opt because no such name was needed
(whereas the other functions needed such a name since the only other
name for that entry point was e.g. f32xaddf64, not reserved by TS
18661-1); the headers are made to arrange for sqrt to be called in
that case instead.
The DIAG_* calls in sysdeps/ieee754/soft-fp/s_dsqrtl.c are because
they were observed to be needed in GCC 7 testing of
riscv32-linux-gnu-rv32imac-ilp32. The other sysdeps/ieee754/soft-fp/
files added didn't need such DIAG_* in any configuration I tested with
build-many-glibcs.py, but if they do turn out to be needed in more
files with some other configuration / GCC version, they can always be
added there.
I reused the same test inputs in auto-libm-test-in as for
non-narrowing sqrt rather than adding extra or separate inputs for
narrowing sqrt. The tests in libm-test-narrow-sqrt.inc also follow
those for non-narrowing sqrt.
Tested as followed: natively with the full glibc testsuite for x86_64
(GCC 11, 7, 6) and x86 (GCC 11); with build-many-glibcs.py with GCC
11, 7 and 6; cross testing of math/ tests for powerpc64le, powerpc32
hard float, mips64 (all three ABIs, both hard and soft float). The
different GCC versions are to cover the different cases in tgmath.h
and tgmath.h tests properly (GCC 6 has _Float* only as typedefs in
glibc headers, GCC 7 has proper _Float* support, GCC 8 adds
__builtin_tgmath).
2021-09-10 20:56:22 +00:00
|
|
|
f32sqrtf64x; f32sqrtf128;
|
|
|
|
f32xsqrtf64x; f32xsqrtf128; f64sqrtf64x; f64sqrtf128;
|
|
|
|
f64xsqrtf128;
|
Add fmaximum, fminimum functions
C2X adds new <math.h> functions for floating-point maximum and
minimum, corresponding to the new operations that were added in IEEE
754-2019 because of concerns about the old operations not being
associative in the presence of signaling NaNs. fmaximum and fminimum
handle NaNs like most <math.h> functions (any NaN argument means the
result is a quiet NaN). fmaximum_num and fminimum_num handle both
quiet and signaling NaNs the way fmax and fmin handle quiet NaNs (if
one argument is a number and the other is a NaN, return the number),
but still raise "invalid" for a signaling NaN argument, making them
exceptions to the normal rule that a function with a floating-point
result raising "invalid" also returns a quiet NaN. fmaximum_mag,
fminimum_mag, fmaximum_mag_num and fminimum_mag_num are corresponding
functions returning the argument with greatest or least absolute
value. All these functions also treat +0 as greater than -0. There
are also corresponding <tgmath.h> type-generic macros.
Add these functions to glibc. The implementations use type-generic
templates based on those for fmax, fmin, fmaxmag and fminmag, and test
inputs are based on those for those functions with appropriate
adjustments to the expected results. The RISC-V maintainers might
wish to add optimized versions of fmaximum_num and fminimum_num (for
float and double), since RISC-V (F extension version 2.2 and later)
provides instructions corresponding to those functions - though it
might be at least as useful to add architecture-independent built-in
functions to GCC and teach the RISC-V back end to expand those
functions inline, which is what you generally want for functions that
can be implemented with a single instruction.
Tested for x86_64 and x86, and with build-many-glibcs.py.
2021-09-28 23:31:35 +00:00
|
|
|
fmaximumf64x; fmaximumf128;
|
|
|
|
fmaximum_numf64x; fmaximum_numf128;
|
|
|
|
fmaximum_magf64x; fmaximum_magf128;
|
|
|
|
fmaximum_mag_numf64x; fmaximum_mag_numf128;
|
|
|
|
fminimumf64x; fminimumf128;
|
|
|
|
fminimum_numf64x; fminimum_numf128;
|
|
|
|
fminimum_magf64x; fminimum_magf128;
|
|
|
|
fminimum_mag_numf64x; fminimum_mag_numf128;
|
2021-04-06 17:33:14 +00:00
|
|
|
# No SVID compatible error handling.
|
|
|
|
hypotf; hypot;
|
Add narrowing square root functions
This patch adds the narrowing square root functions from TS 18661-1 /
TS 18661-3 / C2X to glibc's libm: fsqrt, fsqrtl, dsqrtl, f32sqrtf64,
f32sqrtf32x, f32xsqrtf64 for all configurations; f32sqrtf64x,
f32sqrtf128, f64sqrtf64x, f64sqrtf128, f32xsqrtf64x, f32xsqrtf128,
f64xsqrtf128 for configurations with _Float64x and _Float128;
__f32sqrtieee128 and __f64sqrtieee128 aliases in the powerpc64le case
(for calls to fsqrtl and dsqrtl when long double is IEEE binary128).
Corresponding tgmath.h macro support is also added.
The changes are mostly similar to those for the other narrowing
functions previously added, so the description of those generally
applies to this patch as well. However, the not-actually-narrowing
cases (where the two types involved in the function have the same
floating-point format) are aliased to sqrt, sqrtl or sqrtf128 rather
than needing a separately built not-actually-narrowing function such
as was needed for add / sub / mul / div. Thus, there is no
__nldbl_dsqrtl name for ldbl-opt because no such name was needed
(whereas the other functions needed such a name since the only other
name for that entry point was e.g. f32xaddf64, not reserved by TS
18661-1); the headers are made to arrange for sqrt to be called in
that case instead.
The DIAG_* calls in sysdeps/ieee754/soft-fp/s_dsqrtl.c are because
they were observed to be needed in GCC 7 testing of
riscv32-linux-gnu-rv32imac-ilp32. The other sysdeps/ieee754/soft-fp/
files added didn't need such DIAG_* in any configuration I tested with
build-many-glibcs.py, but if they do turn out to be needed in more
files with some other configuration / GCC version, they can always be
added there.
I reused the same test inputs in auto-libm-test-in as for
non-narrowing sqrt rather than adding extra or separate inputs for
narrowing sqrt. The tests in libm-test-narrow-sqrt.inc also follow
those for non-narrowing sqrt.
Tested as followed: natively with the full glibc testsuite for x86_64
(GCC 11, 7, 6) and x86 (GCC 11); with build-many-glibcs.py with GCC
11, 7 and 6; cross testing of math/ tests for powerpc64le, powerpc32
hard float, mips64 (all three ABIs, both hard and soft float). The
different GCC versions are to cover the different cases in tgmath.h
and tgmath.h tests properly (GCC 6 has _Float* only as typedefs in
glibc headers, GCC 7 has proper _Float* support, GCC 8 adds
__builtin_tgmath).
2021-09-10 20:56:22 +00:00
|
|
|
}
|
2023-03-20 16:01:18 +00:00
|
|
|
GLIBC_2.38 {
|
|
|
|
# No SVID compatible error handling.
|
|
|
|
fmod; fmodf;
|
|
|
|
}
|
2024-01-09 15:32:08 +00:00
|
|
|
GLIBC_2.39 {
|
|
|
|
# No SVID compatible error handling.
|
|
|
|
exp10;
|
|
|
|
}
|
2024-05-20 13:41:39 +00:00
|
|
|
GLIBC_2.40 {
|
|
|
|
# Functions not involving _Float64x or _Float128, for all configurations.
|
Implement C23 exp2m1, exp10m1
C23 adds various <math.h> function families originally defined in TS
18661-4. Add the exp2m1 and exp10m1 functions (exp2(x)-1 and
exp10(x)-1, like expm1).
As with other such functions, these use type-generic templates that
could be replaced with faster and more accurate type-specific
implementations in future. Test inputs are copied from those for
expm1, plus some additions close to the overflow threshold (copied
from exp2 and exp10) and also some near the underflow threshold.
exp2m1 has the unusual property of having an input (M_MAX_EXP) where
whether the function overflows (under IEEE semantics) depends on the
rounding mode. Although these could reasonably be XFAILed in the
testsuite (as we do in some cases for arguments very close to a
function's overflow threshold when an error of a few ulps in the
implementation can result in the implementation not agreeing with an
ideal one on whether overflow takes place - the testsuite isn't smart
enough to handle this automatically), since these functions aren't
required to be correctly rounding, I made the implementation check for
and handle this case specially.
The Makefile ordering expected by lint-makefiles for the new functions
is a bit peculiar, but I implemented it in this patch so that the test
passes; I don't know why log2 also needed moving in one Makefile
variable setting when it didn't in my previous patches, but the
failure showed a different place was expected for that function as
well.
The powerpc64le IFUNC setup seems not to be as self-contained as one
might hope; it shouldn't be necessary to add IFUNCs for new functions
such as these simply to get them building, but without setting up
IFUNCs for the new functions, there were undefined references to
__GI___expm1f128 (that IFUNC machinery results in no such function
being defined, but doesn't stop include/math.h from doing the
redirection resulting in the exp2m1f128 and exp10m1f128
implementations expecting to call it).
Tested for x86_64 and x86, and with build-many-glibcs.py.
2024-06-17 16:31:49 +00:00
|
|
|
exp2m1; exp2m1f; exp2m1l; exp2m1f32; exp2m1f64; exp2m1f32x;
|
|
|
|
exp10m1; exp10m1f; exp10m1l; exp10m1f32; exp10m1f64; exp10m1f32x;
|
2024-05-20 13:41:39 +00:00
|
|
|
log2p1; log2p1f; log2p1l; log2p1f32; log2p1f64; log2p1f32x;
|
2024-06-17 13:48:13 +00:00
|
|
|
log10p1; log10p1f; log10p1l; log10p1f32; log10p1f64; log10p1f32x;
|
Implement C23 logp1
C23 adds various <math.h> function families originally defined in TS
18661-4. Add the logp1 functions (aliases for log1p functions - the
name is intended to be more consistent with the new log2p1 and
log10p1, where clearly it would have been very confusing to name those
functions log21p and log101p). As aliases rather than new functions,
the content of this patch is somewhat different from those actually
adding new functions.
Tests are shared with log1p, so this patch *does* mechanically update
all affected libm-test-ulps files to expect the same errors for both
functions.
The vector versions of log1p on aarch64 and x86_64 are *not* updated
to have logp1 aliases (and thus there are no corresponding header,
tests, abilist or ulps changes for vector functions either). It would
be reasonable for such vector aliases and corresponding changes to
other files to be made separately. For now, the log1p tests instead
avoid testing logp1 in the vector case (a Makefile change is needed to
avoid problems with grep, used in generating the .c files for vector
function tests, matching more than one ALL_RM_TEST line in a file
testing multiple functions with the same inputs, when it assumes that
the .inc file only has a single such line).
Tested for x86_64 and x86, and with build-many-glibcs.py.
2024-06-17 13:47:09 +00:00
|
|
|
logp1; logp1f; logp1l; logp1f32; logp1f64; logp1f32x;
|
2024-05-20 13:41:39 +00:00
|
|
|
# Functions involving _Float64x or _Float128, for some configurations.
|
Implement C23 exp2m1, exp10m1
C23 adds various <math.h> function families originally defined in TS
18661-4. Add the exp2m1 and exp10m1 functions (exp2(x)-1 and
exp10(x)-1, like expm1).
As with other such functions, these use type-generic templates that
could be replaced with faster and more accurate type-specific
implementations in future. Test inputs are copied from those for
expm1, plus some additions close to the overflow threshold (copied
from exp2 and exp10) and also some near the underflow threshold.
exp2m1 has the unusual property of having an input (M_MAX_EXP) where
whether the function overflows (under IEEE semantics) depends on the
rounding mode. Although these could reasonably be XFAILed in the
testsuite (as we do in some cases for arguments very close to a
function's overflow threshold when an error of a few ulps in the
implementation can result in the implementation not agreeing with an
ideal one on whether overflow takes place - the testsuite isn't smart
enough to handle this automatically), since these functions aren't
required to be correctly rounding, I made the implementation check for
and handle this case specially.
The Makefile ordering expected by lint-makefiles for the new functions
is a bit peculiar, but I implemented it in this patch so that the test
passes; I don't know why log2 also needed moving in one Makefile
variable setting when it didn't in my previous patches, but the
failure showed a different place was expected for that function as
well.
The powerpc64le IFUNC setup seems not to be as self-contained as one
might hope; it shouldn't be necessary to add IFUNCs for new functions
such as these simply to get them building, but without setting up
IFUNCs for the new functions, there were undefined references to
__GI___expm1f128 (that IFUNC machinery results in no such function
being defined, but doesn't stop include/math.h from doing the
redirection resulting in the exp2m1f128 and exp10m1f128
implementations expecting to call it).
Tested for x86_64 and x86, and with build-many-glibcs.py.
2024-06-17 16:31:49 +00:00
|
|
|
exp2m1f64x; exp2m1f128;
|
|
|
|
exp10m1f64x; exp10m1f128;
|
2024-05-20 13:41:39 +00:00
|
|
|
log2p1f64x; log2p1f128;
|
2024-06-17 13:48:13 +00:00
|
|
|
log10p1f64x; log10p1f128;
|
Implement C23 logp1
C23 adds various <math.h> function families originally defined in TS
18661-4. Add the logp1 functions (aliases for log1p functions - the
name is intended to be more consistent with the new log2p1 and
log10p1, where clearly it would have been very confusing to name those
functions log21p and log101p). As aliases rather than new functions,
the content of this patch is somewhat different from those actually
adding new functions.
Tests are shared with log1p, so this patch *does* mechanically update
all affected libm-test-ulps files to expect the same errors for both
functions.
The vector versions of log1p on aarch64 and x86_64 are *not* updated
to have logp1 aliases (and thus there are no corresponding header,
tests, abilist or ulps changes for vector functions either). It would
be reasonable for such vector aliases and corresponding changes to
other files to be made separately. For now, the log1p tests instead
avoid testing logp1 in the vector case (a Makefile change is needed to
avoid problems with grep, used in generating the .c files for vector
function tests, matching more than one ALL_RM_TEST line in a file
testing multiple functions with the same inputs, when it assumes that
the .inc file only has a single such line).
Tested for x86_64 and x86, and with build-many-glibcs.py.
2024-06-17 13:47:09 +00:00
|
|
|
logp1f64x; logp1f128;
|
2024-05-20 13:41:39 +00:00
|
|
|
}
|
1998-07-02 22:51:40 +00:00
|
|
|
}
|