glibc/nptl_db/Makefile

73 lines
2.6 KiB
Makefile
Raw Normal View History

# Copyright (C) 2002-2024 Free Software Foundation, Inc.
Initial revision 2002-11-26 Ulrich Drepper <drepper@redhat.com> * allocatestack.c (queue_stack): Don't remove stack from list here. Do it in the caller. Correct condition to prematurely terminate loop to free stacks. (__deallocate_stack): Remove stack from list here. 2002-11-26 Ulrich Drepper <drepper@redhat.com> * Makefile (tests): Add tst-stack1. * tst-stack1.c: New file. * allocatestack.c (allocate_stack): Initialize the TCB on a user provided stack. * pthread_attr_getstack.c: Return bottom of the thread area. 2002-11-25 Ulrich Drepper <drepper@redhat.com> * Makefile (libpthread-routines): Add pt-allocrtsig and pthread_kill_other_threads. * pt-allocrtsig.c: New file. * pthread_kill_other_threads.c: New file. * sysdeps/unix/sysv/linux/allocrtsig.c: Add additional aliases for all three functions. * sysdeps/unix/sysv/linux/Makefile (sysdep_routines): Remove allocrtsig. * sysdeps/unix/sysv/linux/Versions (libc:GLIBC_PRIVATE): Export __libc_current_sigrtmin_private, __libc_current_sigrtmax_private, and __libc_allocate_rtsig_private. * Versions (libpthread): Export pthread_kill_other_threads_np, __libc_current_sigrtmin, and __libc_current_sigrtmax. 2002-11-24 Ulrich Drepper <drepper@redhat.com> * allocatestack.c (allocate_stack): stackaddr in attribute points to the end of the stack. Adjust computations. When mprotect call fails dequeue stack and free it. * pthread_attr_setstack.c: Store top of the stack in stackaddr attribute. * pthread_getattr_np.c: Likewise. * descr.h (IS_DETACHED): Add some more parenthesis to prevent surprises. 2002-11-23 Ulrich Drepper <drepper@redhat.com> * sysdeps/pthread/pthread.h (pthread_self): __THROW must come before attribute definitions. Patch by Luca Barbieri <ldb@ldb.ods.org>. 2002-11-22 Ulrich Drepper <drepper@redhat.com> * pthread_getspecific.c: Optimize access to first 2nd-level array. * pthread_setspecific.c: Likewise. 2002-11-21 Ulrich Drepper <drepper@redhat.com> * sysdeps/unix/sysv/linux/i386/createthread.c: Remove CLONE_ flags definitions. Get them from the official place. * sysdeps/unix/sysv/linux/i386/fork.c: Likewise. * sysdeps/unix/sysv/linux/i386/createthread.c: Update CLONE_* flags. Use new CLONE_ flags in clone() calls. * sysdeps/unix/sysv/linux/fork.c: Use ARCH_FORK to actually fork. * sysdeps/unix/sysv/linux/i386/fork.c: New file. * Versions: Add pthread_* functions for libc. * forward.c: New file. * sysdeps/pthread/Makefile (libpthread-sysdeps_routines): Add errno-loc. * herrno.c: New file. * res.c: New file. * Makefile (libpthread-routines): Remove sem_post, sem_wait, sem_trywait, and sem_timedwait. Add herrno and res. * sem_init.c: Don't initialize lock and waiters members. * sem_open.c: Likewise. * sem_post.c: Removed. * sem_wait.c: Removed. * sem_trywait.c: Removed. * sem_timedwait.c: Removed. * sysdeps/unix/sysv/linux/i386/i486/lowlevelsem.S: Complete rewrite. Includes full implementations of sem_post, sem_wait, sem_trywait, and sem_timedwait. * sysdeps/unix/sysv/linux/i386/lowlevelsem.h (lll_sem_post): Adjust for new implementation. * sysdeps/unix/sysv/linux/internaltypes.h (struct sem): Remove lock and waiters fields. * tst-sem3.c: Improve error message. * tst-signal3.c: Likewise. * init.c (__pthread_initialize_minimal): Use set_tid_address syscall to tell the kernel about the termination futex and to initialize tid member. Don't initialize main_thread. * descr.h (struct pthread): Remove main_thread member. * cancelllation.c (__do_cancel): Remove code handling main thread. The main thread is not special anymore. * allocatestack.c (__reclaim_stacks): Mark stacks as unused. Add size of the stacks to stack_cache_actsize. * pt-readv.c: Add missing "defined". * pt-sigwait.c: Likewise. * pt-writev.c: Likewise. 2002-11-09 Ulrich Drepper <drepper@redhat.com> * Versions: Export __connect from libpthread. Patch by Luca Barbieri <ldb@ldb.ods.org>. * Makefile (libpthread-routines): Add pt-raise. * sysdeps/unix/sysv/linux/raise.c: New file. * sysdeps/unix/sysv/linux/pt-raise.c: New file. * sysdeps/generic/pt-raise.c: New file. * pthread_cond_init.c: Initialize all data elements of the condvar structure. Patch by Luca Barbieri <ldb@ldb.ods.org>. * pthread_attr_init.c: Actually implement 2.0 compatibility version. * pthread_create.c: Likewise. * Makefile (tests): Add tst-key1, tst-key2, tst-key3. * tst-key1.c: New file. * tst-key2.c: New file. * tst-key3.c: New file. * Versions: Export pthread_detach for version GLIBC_2.0. Reported by Saurabh Desai <sdesai@austin.ibm.com>. 2002-11-08 Ulrich Drepper <drepper@redhat.com> * pthread_key_create.c: Terminate search after an unused key was found. Patch by Luca Barbieri <ldb@ldb.ods.org>. * sysdeps/unix/sysv/linux/i386/pthread_once.S: Return zero. Patch by Luca Barbieri <ldb@ldb.ods.org>. 2002-10-10 Ulrich Drepper <drepper@redhat.com> * sysdeps/unix/sysv/linux/i386/i486/lowlevelsem.S: Use slow generic dynamic lookup for errno in PIC. * allocatestack.c (get_cached_stack): Rearrange code slightly to release the stack lock as soon as possible. Call _dl_allocate_tls_init for TCB from the cache to re-initialize the static TLS block. (allocate_stack): Call _dl_allocate_tls_init for user-provided stack. * cancellation.c: Renamed from cancelation.c. * Makefile: Adjust accordingly. * pthreadP.h (CANCELLATION_P): Renamed from CANCELATION_P. * cleanup_defer.c: Use CANCELLATION_P. * pthread_testcancel.c: Likewise. * descr.h: Fix spelling in comments. * init.c: Likewise. * pthread_getattr_np.c: Likewise. * pthread_getschedparam.c: Likewise. * pthread_setschedparam.c: Likewise. * Versions: Likewise. * pt-pselect.c: New file. * Makefile (libpthread-routines): Add pt-pselect. * Versions: Add pselect. * tst-cancel4.c: New file. * Makefile (tests): Add tst-cancel4. 2002-10-09 Ulrich Drepper <drepper@redhat.com> * pthread_mutex_lock.c: Always record lock ownership. * pthread_mutex_timedlock.c: Likewise. * pthread_mutex_trylock.c: Likewise. * pt-readv.c: New file. * pt-writev.c: New file. * pt-creat.c: New file. * pt-msgrcv.c: New file. * pt-msgsnd.c: New file. * pt-poll.c: New file. * pt-select.c: New file. * pt-sigpause.c: New file. * pt-sigsuspend.c: New file. * pt-sigwait.c: New file. * pt-sigwaitinfo.c: New file. * pt-waitid.c: New file. * Makefile (libpthread-routines): Add pt-readv, pt-writev, pt-creat, pt-msgrcv, pt-msgsnd, pt-poll, pt-select, pt-sigpause, pt-sigsuspend, pt-sigwait, pt-sigwaitinfo, and pt-waitid. * Versions: Add all the new functions. * tst-exit1.c: New file. * Makefile (tests): Add tst-exit1. * sem_timedwait.c: Minor optimization for more optimal fastpath. 2002-10-08 Ulrich Drepper <drepper@redhat.com> * pt-fcntl.c: Only enable asynchronous cancellation for F_SETLKW. * pthread_join.c: Enable asynchronous cancellation around lll_wait_tid call. pthread_join is an official cancellation point. * pthread_timedjoin.c: Likewise. * pthread_cond_wait.c: Revert order in which internal lock are dropped and the condvar's mutex are retrieved. * pthread_cond_timedwait.c: Likewise. Reported by dice@saros.East.Sun.COM. 2002-10-07 Ulrich Drepper <drepper@redhat.com> * pthreadP.h: Cut out all type definitions and move them... * sysdeps/unix/sysv/linux/internaltypes.h: ...here. New file. * pthreadP.h: Include <internaltypes.h>. * sysdeps/unix/sysv/linux/i386/lowlevelsem.h (lll_sem_post): Little performance tweaks. * sem_trywait.c: Shuffle #includes around to get right order. * sem_timedwait.c: Likewise. * sem_post.c: Likewise. * sem_wait.c: Likewise. * nptl 0.3 released. * Makefile (tests): Add tst-signal3. * tst-signal3.c: New file. 2002-10-05 Ulrich Drepper <drepper@redhat.com> * sysdeps/unix/sysv/linux/i386/lowlevelsem.h: Tell the compiler that the asms modify the sem object. (__lll_sem_timedwait): Now takes struct sem* as first parameter. * sysdeps/unix/sysv/linux/i386/bits/semaphore.h (sem_t): Don't expose the actual members. * pthreadP.h (struct sem): New type. Actual semaphore type. * semaphoreP.h: Include pthreadP.h. * sem_getvalue.c: Adjust to sem_t change. * sem_init.c: Likewise. * sem_open.c: Likewise. * sem_post.c: Likewise. * sem_timedwait.c: Likewise. * sem_trywait.c: Likewise. * sem_wait.c: Likewise. 2002-10-04 Ulrich Drepper <drepper@redhat.com> * Makefile (tests): Add tst-basic2, tst-exec1, tst-exec3, tst-exec3. * tst-basic2.c: New file. * tst-exec1.c: New file. * tst-exec2.c: New file. * tst-exec3.c: New file. * tst-fork1.c: Remove extra */. * nptl 0.2 released. The API for IA-32 is complete.
2002-11-26 22:50:54 +00:00
# This file is part of the GNU C Library.
# The GNU C Library is free software; you can redistribute it and/or
# modify it under the terms of the GNU Lesser General Public
# License as published by the Free Software Foundation; either
# version 2.1 of the License, or (at your option) any later version.
# The GNU C Library is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# Lesser General Public License for more details.
# You should have received a copy of the GNU Lesser General Public
# License along with the GNU C Library; if not, see
Prefer https to http for gnu.org and fsf.org URLs Also, change sources.redhat.com to sourceware.org. This patch was automatically generated by running the following shell script, which uses GNU sed, and which avoids modifying files imported from upstream: sed -ri ' s,(http|ftp)(://(.*\.)?(gnu|fsf|sourceware)\.org($|[^.]|\.[^a-z])),https\2,g s,(http|ftp)(://(.*\.)?)sources\.redhat\.com($|[^.]|\.[^a-z]),https\2sourceware.org\4,g ' \ $(find $(git ls-files) -prune -type f \ ! -name '*.po' \ ! -name 'ChangeLog*' \ ! -path COPYING ! -path COPYING.LIB \ ! -path manual/fdl-1.3.texi ! -path manual/lgpl-2.1.texi \ ! -path manual/texinfo.tex ! -path scripts/config.guess \ ! -path scripts/config.sub ! -path scripts/install-sh \ ! -path scripts/mkinstalldirs ! -path scripts/move-if-change \ ! -path INSTALL ! -path locale/programs/charmap-kw.h \ ! -path po/libc.pot ! -path sysdeps/gnu/errlist.c \ ! '(' -name configure \ -execdir test -f configure.ac -o -f configure.in ';' ')' \ ! '(' -name preconfigure \ -execdir test -f preconfigure.ac ';' ')' \ -print) and then by running 'make dist-prepare' to regenerate files built from the altered files, and then executing the following to cleanup: chmod a+x sysdeps/unix/sysv/linux/riscv/configure # Omit irrelevant whitespace and comment-only changes, # perhaps from a slightly-different Autoconf version. git checkout -f \ sysdeps/csky/configure \ sysdeps/hppa/configure \ sysdeps/riscv/configure \ sysdeps/unix/sysv/linux/csky/configure # Omit changes that caused a pre-commit check to fail like this: # remote: *** error: sysdeps/powerpc/powerpc64/ppc-mcount.S: trailing lines git checkout -f \ sysdeps/powerpc/powerpc64/ppc-mcount.S \ sysdeps/unix/sysv/linux/s390/s390-64/syscall.S # Omit change that caused a pre-commit check to fail like this: # remote: *** error: sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S: last line does not end in newline git checkout -f sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S
2019-09-07 05:40:42 +00:00
# <https://www.gnu.org/licenses/>.
Initial revision 2002-11-26 Ulrich Drepper <drepper@redhat.com> * allocatestack.c (queue_stack): Don't remove stack from list here. Do it in the caller. Correct condition to prematurely terminate loop to free stacks. (__deallocate_stack): Remove stack from list here. 2002-11-26 Ulrich Drepper <drepper@redhat.com> * Makefile (tests): Add tst-stack1. * tst-stack1.c: New file. * allocatestack.c (allocate_stack): Initialize the TCB on a user provided stack. * pthread_attr_getstack.c: Return bottom of the thread area. 2002-11-25 Ulrich Drepper <drepper@redhat.com> * Makefile (libpthread-routines): Add pt-allocrtsig and pthread_kill_other_threads. * pt-allocrtsig.c: New file. * pthread_kill_other_threads.c: New file. * sysdeps/unix/sysv/linux/allocrtsig.c: Add additional aliases for all three functions. * sysdeps/unix/sysv/linux/Makefile (sysdep_routines): Remove allocrtsig. * sysdeps/unix/sysv/linux/Versions (libc:GLIBC_PRIVATE): Export __libc_current_sigrtmin_private, __libc_current_sigrtmax_private, and __libc_allocate_rtsig_private. * Versions (libpthread): Export pthread_kill_other_threads_np, __libc_current_sigrtmin, and __libc_current_sigrtmax. 2002-11-24 Ulrich Drepper <drepper@redhat.com> * allocatestack.c (allocate_stack): stackaddr in attribute points to the end of the stack. Adjust computations. When mprotect call fails dequeue stack and free it. * pthread_attr_setstack.c: Store top of the stack in stackaddr attribute. * pthread_getattr_np.c: Likewise. * descr.h (IS_DETACHED): Add some more parenthesis to prevent surprises. 2002-11-23 Ulrich Drepper <drepper@redhat.com> * sysdeps/pthread/pthread.h (pthread_self): __THROW must come before attribute definitions. Patch by Luca Barbieri <ldb@ldb.ods.org>. 2002-11-22 Ulrich Drepper <drepper@redhat.com> * pthread_getspecific.c: Optimize access to first 2nd-level array. * pthread_setspecific.c: Likewise. 2002-11-21 Ulrich Drepper <drepper@redhat.com> * sysdeps/unix/sysv/linux/i386/createthread.c: Remove CLONE_ flags definitions. Get them from the official place. * sysdeps/unix/sysv/linux/i386/fork.c: Likewise. * sysdeps/unix/sysv/linux/i386/createthread.c: Update CLONE_* flags. Use new CLONE_ flags in clone() calls. * sysdeps/unix/sysv/linux/fork.c: Use ARCH_FORK to actually fork. * sysdeps/unix/sysv/linux/i386/fork.c: New file. * Versions: Add pthread_* functions for libc. * forward.c: New file. * sysdeps/pthread/Makefile (libpthread-sysdeps_routines): Add errno-loc. * herrno.c: New file. * res.c: New file. * Makefile (libpthread-routines): Remove sem_post, sem_wait, sem_trywait, and sem_timedwait. Add herrno and res. * sem_init.c: Don't initialize lock and waiters members. * sem_open.c: Likewise. * sem_post.c: Removed. * sem_wait.c: Removed. * sem_trywait.c: Removed. * sem_timedwait.c: Removed. * sysdeps/unix/sysv/linux/i386/i486/lowlevelsem.S: Complete rewrite. Includes full implementations of sem_post, sem_wait, sem_trywait, and sem_timedwait. * sysdeps/unix/sysv/linux/i386/lowlevelsem.h (lll_sem_post): Adjust for new implementation. * sysdeps/unix/sysv/linux/internaltypes.h (struct sem): Remove lock and waiters fields. * tst-sem3.c: Improve error message. * tst-signal3.c: Likewise. * init.c (__pthread_initialize_minimal): Use set_tid_address syscall to tell the kernel about the termination futex and to initialize tid member. Don't initialize main_thread. * descr.h (struct pthread): Remove main_thread member. * cancelllation.c (__do_cancel): Remove code handling main thread. The main thread is not special anymore. * allocatestack.c (__reclaim_stacks): Mark stacks as unused. Add size of the stacks to stack_cache_actsize. * pt-readv.c: Add missing "defined". * pt-sigwait.c: Likewise. * pt-writev.c: Likewise. 2002-11-09 Ulrich Drepper <drepper@redhat.com> * Versions: Export __connect from libpthread. Patch by Luca Barbieri <ldb@ldb.ods.org>. * Makefile (libpthread-routines): Add pt-raise. * sysdeps/unix/sysv/linux/raise.c: New file. * sysdeps/unix/sysv/linux/pt-raise.c: New file. * sysdeps/generic/pt-raise.c: New file. * pthread_cond_init.c: Initialize all data elements of the condvar structure. Patch by Luca Barbieri <ldb@ldb.ods.org>. * pthread_attr_init.c: Actually implement 2.0 compatibility version. * pthread_create.c: Likewise. * Makefile (tests): Add tst-key1, tst-key2, tst-key3. * tst-key1.c: New file. * tst-key2.c: New file. * tst-key3.c: New file. * Versions: Export pthread_detach for version GLIBC_2.0. Reported by Saurabh Desai <sdesai@austin.ibm.com>. 2002-11-08 Ulrich Drepper <drepper@redhat.com> * pthread_key_create.c: Terminate search after an unused key was found. Patch by Luca Barbieri <ldb@ldb.ods.org>. * sysdeps/unix/sysv/linux/i386/pthread_once.S: Return zero. Patch by Luca Barbieri <ldb@ldb.ods.org>. 2002-10-10 Ulrich Drepper <drepper@redhat.com> * sysdeps/unix/sysv/linux/i386/i486/lowlevelsem.S: Use slow generic dynamic lookup for errno in PIC. * allocatestack.c (get_cached_stack): Rearrange code slightly to release the stack lock as soon as possible. Call _dl_allocate_tls_init for TCB from the cache to re-initialize the static TLS block. (allocate_stack): Call _dl_allocate_tls_init for user-provided stack. * cancellation.c: Renamed from cancelation.c. * Makefile: Adjust accordingly. * pthreadP.h (CANCELLATION_P): Renamed from CANCELATION_P. * cleanup_defer.c: Use CANCELLATION_P. * pthread_testcancel.c: Likewise. * descr.h: Fix spelling in comments. * init.c: Likewise. * pthread_getattr_np.c: Likewise. * pthread_getschedparam.c: Likewise. * pthread_setschedparam.c: Likewise. * Versions: Likewise. * pt-pselect.c: New file. * Makefile (libpthread-routines): Add pt-pselect. * Versions: Add pselect. * tst-cancel4.c: New file. * Makefile (tests): Add tst-cancel4. 2002-10-09 Ulrich Drepper <drepper@redhat.com> * pthread_mutex_lock.c: Always record lock ownership. * pthread_mutex_timedlock.c: Likewise. * pthread_mutex_trylock.c: Likewise. * pt-readv.c: New file. * pt-writev.c: New file. * pt-creat.c: New file. * pt-msgrcv.c: New file. * pt-msgsnd.c: New file. * pt-poll.c: New file. * pt-select.c: New file. * pt-sigpause.c: New file. * pt-sigsuspend.c: New file. * pt-sigwait.c: New file. * pt-sigwaitinfo.c: New file. * pt-waitid.c: New file. * Makefile (libpthread-routines): Add pt-readv, pt-writev, pt-creat, pt-msgrcv, pt-msgsnd, pt-poll, pt-select, pt-sigpause, pt-sigsuspend, pt-sigwait, pt-sigwaitinfo, and pt-waitid. * Versions: Add all the new functions. * tst-exit1.c: New file. * Makefile (tests): Add tst-exit1. * sem_timedwait.c: Minor optimization for more optimal fastpath. 2002-10-08 Ulrich Drepper <drepper@redhat.com> * pt-fcntl.c: Only enable asynchronous cancellation for F_SETLKW. * pthread_join.c: Enable asynchronous cancellation around lll_wait_tid call. pthread_join is an official cancellation point. * pthread_timedjoin.c: Likewise. * pthread_cond_wait.c: Revert order in which internal lock are dropped and the condvar's mutex are retrieved. * pthread_cond_timedwait.c: Likewise. Reported by dice@saros.East.Sun.COM. 2002-10-07 Ulrich Drepper <drepper@redhat.com> * pthreadP.h: Cut out all type definitions and move them... * sysdeps/unix/sysv/linux/internaltypes.h: ...here. New file. * pthreadP.h: Include <internaltypes.h>. * sysdeps/unix/sysv/linux/i386/lowlevelsem.h (lll_sem_post): Little performance tweaks. * sem_trywait.c: Shuffle #includes around to get right order. * sem_timedwait.c: Likewise. * sem_post.c: Likewise. * sem_wait.c: Likewise. * nptl 0.3 released. * Makefile (tests): Add tst-signal3. * tst-signal3.c: New file. 2002-10-05 Ulrich Drepper <drepper@redhat.com> * sysdeps/unix/sysv/linux/i386/lowlevelsem.h: Tell the compiler that the asms modify the sem object. (__lll_sem_timedwait): Now takes struct sem* as first parameter. * sysdeps/unix/sysv/linux/i386/bits/semaphore.h (sem_t): Don't expose the actual members. * pthreadP.h (struct sem): New type. Actual semaphore type. * semaphoreP.h: Include pthreadP.h. * sem_getvalue.c: Adjust to sem_t change. * sem_init.c: Likewise. * sem_open.c: Likewise. * sem_post.c: Likewise. * sem_timedwait.c: Likewise. * sem_trywait.c: Likewise. * sem_wait.c: Likewise. 2002-10-04 Ulrich Drepper <drepper@redhat.com> * Makefile (tests): Add tst-basic2, tst-exec1, tst-exec3, tst-exec3. * tst-basic2.c: New file. * tst-exec1.c: New file. * tst-exec2.c: New file. * tst-exec3.c: New file. * tst-fork1.c: Remove extra */. * nptl 0.2 released. The API for IA-32 is complete.
2002-11-26 22:50:54 +00:00
# Makefile for NPTL debug library subdirectory of GNU C Library.
subdir := nptl_db
Consistently include Makeconfig after defining subdir. In <https://sourceware.org/ml/libc-alpha/2014-01/msg00196.html> I noted it was necessary to add includes of Makeconfig early in various subdirectory makefiles for the tests-special variable settings added by that patch to be conditional on configuration information. No-one commented on the general question there of whether Makeconfig should always be included immediately after the definition of subdir. This patch implements that early inclusion of Makeconfig in each directory (which is a lot easier than consistent placement of includes of Rules). Includes are added if needed, or moved up if already present. Subdirectory "all:" targets are removed, since Makeconfig provides one. There is potential for further cleanups I haven't done. Rules and Makerules have code such as ifneq "$(findstring env,$(origin headers))" "" headers := endif to override to empty any value of various variables that came from the environment. I think there is a case for Makeconfig setting all the subdirectory variables (other than subdir) to empty to ensure no outside value is going to take effect if a subdirectory fails to define a variable. (A list of such variables, possibly out of date and incomplete, is in manual/maint.texi.) Rules and Makerules would give errors if Makeconfig hadn't already been included, instead of including it themselves. The special code to override values coming from the environment would then be obsolete and could be removed. Tested x86_64, including that installed binaries are identical before and after the patch. * argp/Makefile: Include Makeconfig immediately after defining subdir. * assert/Makefile: Likewise. * benchtests/Makefile: Likewise. * catgets/Makefile: Likewise. * conform/Makefile: Likewise. * crypt/Makefile: Likewise. * csu/Makefile: Likewise. (all): Remove target. * ctype/Makefile: Include Makeconfig immediately after defining subdir. * debug/Makefile: Likewise. * dirent/Makefile: Likewise. * dlfcn/Makefile: Likewise. * gmon/Makefile: Likewise. * gnulib/Makefile: Likewise. * grp/Makefile: Likewise. * gshadow/Makefile: Likewise. * hesiod/Makefile: Likewise. * hurd/Makefile: Likewise. (all): Remove target. * iconvdata/Makefile: Include Makeconfig immediately after defining subdir. * inet/Makefile: Likewise. * intl/Makefile: Likewise. * io/Makefile: Likewise. * libio/Makefile: Likewise. (all): Remove target. * locale/Makefile: Include Makeconfig immediately after defining subdir. * login/Makefile: Likewise. * mach/Makefile: Likewise. (all): Remove target. * malloc/Makefile: Include Makeconfig immediately after defining subdir. (all): Remove target. * manual/Makefile: Include Makeconfig immediately after defining subdir. * math/Makefile: Likewise. * misc/Makefile: Likewise. * nis/Makefile: Likewise. * nss/Makefile: Likewise. * po/Makefile: Likewise. (all): Remove target. * posix/Makefile: Include Makeconfig immediately after defining subdir. * pwd/Makefile: Likewise. * resolv/Makefile: Likewise. * resource/Makefile: Likewise. * rt/Makefile: Likewise. * setjmp/Makefile: Likewise. * shadow/Makefile: Likewise. * signal/Makefile: Likewise. * socket/Makefile: Likewise. * soft-fp/Makefile: Likewise. * stdio-common/Makefile: Likewise. * stdlib/Makefile: Likewise. * streams/Makefile: Likewise. * string/Makefile: Likewise. * sunrpc/Makefile: Likewise. (all): Remove target. * sysvipc/Makefile: Include Makeconfig immediately after defining subdir. * termios/Makefile: Likewise. * time/Makefile: Likewise. * timezone/Makefile: Likewise. (all): Remove target. * wcsmbs/Makefile: Include Makeconfig immediately after defining subdir. * wctype/Makefile: Likewise. libidn/ChangeLog: * Makefile: Include Makeconfig immediately after defining subdir. localedata/ChangeLog: * Makefile: Include Makeconfig immediately after defining subdir. (all): Remove target. nptl/ChangeLog: * Makefile: Include Makeconfig immediately after defining subdir. nptl_db/ChangeLog: * Makefile: Include Makeconfig immediately after defining subdir.
2014-02-26 23:12:03 +00:00
include ../Makeconfig
Initial revision 2002-11-26 Ulrich Drepper <drepper@redhat.com> * allocatestack.c (queue_stack): Don't remove stack from list here. Do it in the caller. Correct condition to prematurely terminate loop to free stacks. (__deallocate_stack): Remove stack from list here. 2002-11-26 Ulrich Drepper <drepper@redhat.com> * Makefile (tests): Add tst-stack1. * tst-stack1.c: New file. * allocatestack.c (allocate_stack): Initialize the TCB on a user provided stack. * pthread_attr_getstack.c: Return bottom of the thread area. 2002-11-25 Ulrich Drepper <drepper@redhat.com> * Makefile (libpthread-routines): Add pt-allocrtsig and pthread_kill_other_threads. * pt-allocrtsig.c: New file. * pthread_kill_other_threads.c: New file. * sysdeps/unix/sysv/linux/allocrtsig.c: Add additional aliases for all three functions. * sysdeps/unix/sysv/linux/Makefile (sysdep_routines): Remove allocrtsig. * sysdeps/unix/sysv/linux/Versions (libc:GLIBC_PRIVATE): Export __libc_current_sigrtmin_private, __libc_current_sigrtmax_private, and __libc_allocate_rtsig_private. * Versions (libpthread): Export pthread_kill_other_threads_np, __libc_current_sigrtmin, and __libc_current_sigrtmax. 2002-11-24 Ulrich Drepper <drepper@redhat.com> * allocatestack.c (allocate_stack): stackaddr in attribute points to the end of the stack. Adjust computations. When mprotect call fails dequeue stack and free it. * pthread_attr_setstack.c: Store top of the stack in stackaddr attribute. * pthread_getattr_np.c: Likewise. * descr.h (IS_DETACHED): Add some more parenthesis to prevent surprises. 2002-11-23 Ulrich Drepper <drepper@redhat.com> * sysdeps/pthread/pthread.h (pthread_self): __THROW must come before attribute definitions. Patch by Luca Barbieri <ldb@ldb.ods.org>. 2002-11-22 Ulrich Drepper <drepper@redhat.com> * pthread_getspecific.c: Optimize access to first 2nd-level array. * pthread_setspecific.c: Likewise. 2002-11-21 Ulrich Drepper <drepper@redhat.com> * sysdeps/unix/sysv/linux/i386/createthread.c: Remove CLONE_ flags definitions. Get them from the official place. * sysdeps/unix/sysv/linux/i386/fork.c: Likewise. * sysdeps/unix/sysv/linux/i386/createthread.c: Update CLONE_* flags. Use new CLONE_ flags in clone() calls. * sysdeps/unix/sysv/linux/fork.c: Use ARCH_FORK to actually fork. * sysdeps/unix/sysv/linux/i386/fork.c: New file. * Versions: Add pthread_* functions for libc. * forward.c: New file. * sysdeps/pthread/Makefile (libpthread-sysdeps_routines): Add errno-loc. * herrno.c: New file. * res.c: New file. * Makefile (libpthread-routines): Remove sem_post, sem_wait, sem_trywait, and sem_timedwait. Add herrno and res. * sem_init.c: Don't initialize lock and waiters members. * sem_open.c: Likewise. * sem_post.c: Removed. * sem_wait.c: Removed. * sem_trywait.c: Removed. * sem_timedwait.c: Removed. * sysdeps/unix/sysv/linux/i386/i486/lowlevelsem.S: Complete rewrite. Includes full implementations of sem_post, sem_wait, sem_trywait, and sem_timedwait. * sysdeps/unix/sysv/linux/i386/lowlevelsem.h (lll_sem_post): Adjust for new implementation. * sysdeps/unix/sysv/linux/internaltypes.h (struct sem): Remove lock and waiters fields. * tst-sem3.c: Improve error message. * tst-signal3.c: Likewise. * init.c (__pthread_initialize_minimal): Use set_tid_address syscall to tell the kernel about the termination futex and to initialize tid member. Don't initialize main_thread. * descr.h (struct pthread): Remove main_thread member. * cancelllation.c (__do_cancel): Remove code handling main thread. The main thread is not special anymore. * allocatestack.c (__reclaim_stacks): Mark stacks as unused. Add size of the stacks to stack_cache_actsize. * pt-readv.c: Add missing "defined". * pt-sigwait.c: Likewise. * pt-writev.c: Likewise. 2002-11-09 Ulrich Drepper <drepper@redhat.com> * Versions: Export __connect from libpthread. Patch by Luca Barbieri <ldb@ldb.ods.org>. * Makefile (libpthread-routines): Add pt-raise. * sysdeps/unix/sysv/linux/raise.c: New file. * sysdeps/unix/sysv/linux/pt-raise.c: New file. * sysdeps/generic/pt-raise.c: New file. * pthread_cond_init.c: Initialize all data elements of the condvar structure. Patch by Luca Barbieri <ldb@ldb.ods.org>. * pthread_attr_init.c: Actually implement 2.0 compatibility version. * pthread_create.c: Likewise. * Makefile (tests): Add tst-key1, tst-key2, tst-key3. * tst-key1.c: New file. * tst-key2.c: New file. * tst-key3.c: New file. * Versions: Export pthread_detach for version GLIBC_2.0. Reported by Saurabh Desai <sdesai@austin.ibm.com>. 2002-11-08 Ulrich Drepper <drepper@redhat.com> * pthread_key_create.c: Terminate search after an unused key was found. Patch by Luca Barbieri <ldb@ldb.ods.org>. * sysdeps/unix/sysv/linux/i386/pthread_once.S: Return zero. Patch by Luca Barbieri <ldb@ldb.ods.org>. 2002-10-10 Ulrich Drepper <drepper@redhat.com> * sysdeps/unix/sysv/linux/i386/i486/lowlevelsem.S: Use slow generic dynamic lookup for errno in PIC. * allocatestack.c (get_cached_stack): Rearrange code slightly to release the stack lock as soon as possible. Call _dl_allocate_tls_init for TCB from the cache to re-initialize the static TLS block. (allocate_stack): Call _dl_allocate_tls_init for user-provided stack. * cancellation.c: Renamed from cancelation.c. * Makefile: Adjust accordingly. * pthreadP.h (CANCELLATION_P): Renamed from CANCELATION_P. * cleanup_defer.c: Use CANCELLATION_P. * pthread_testcancel.c: Likewise. * descr.h: Fix spelling in comments. * init.c: Likewise. * pthread_getattr_np.c: Likewise. * pthread_getschedparam.c: Likewise. * pthread_setschedparam.c: Likewise. * Versions: Likewise. * pt-pselect.c: New file. * Makefile (libpthread-routines): Add pt-pselect. * Versions: Add pselect. * tst-cancel4.c: New file. * Makefile (tests): Add tst-cancel4. 2002-10-09 Ulrich Drepper <drepper@redhat.com> * pthread_mutex_lock.c: Always record lock ownership. * pthread_mutex_timedlock.c: Likewise. * pthread_mutex_trylock.c: Likewise. * pt-readv.c: New file. * pt-writev.c: New file. * pt-creat.c: New file. * pt-msgrcv.c: New file. * pt-msgsnd.c: New file. * pt-poll.c: New file. * pt-select.c: New file. * pt-sigpause.c: New file. * pt-sigsuspend.c: New file. * pt-sigwait.c: New file. * pt-sigwaitinfo.c: New file. * pt-waitid.c: New file. * Makefile (libpthread-routines): Add pt-readv, pt-writev, pt-creat, pt-msgrcv, pt-msgsnd, pt-poll, pt-select, pt-sigpause, pt-sigsuspend, pt-sigwait, pt-sigwaitinfo, and pt-waitid. * Versions: Add all the new functions. * tst-exit1.c: New file. * Makefile (tests): Add tst-exit1. * sem_timedwait.c: Minor optimization for more optimal fastpath. 2002-10-08 Ulrich Drepper <drepper@redhat.com> * pt-fcntl.c: Only enable asynchronous cancellation for F_SETLKW. * pthread_join.c: Enable asynchronous cancellation around lll_wait_tid call. pthread_join is an official cancellation point. * pthread_timedjoin.c: Likewise. * pthread_cond_wait.c: Revert order in which internal lock are dropped and the condvar's mutex are retrieved. * pthread_cond_timedwait.c: Likewise. Reported by dice@saros.East.Sun.COM. 2002-10-07 Ulrich Drepper <drepper@redhat.com> * pthreadP.h: Cut out all type definitions and move them... * sysdeps/unix/sysv/linux/internaltypes.h: ...here. New file. * pthreadP.h: Include <internaltypes.h>. * sysdeps/unix/sysv/linux/i386/lowlevelsem.h (lll_sem_post): Little performance tweaks. * sem_trywait.c: Shuffle #includes around to get right order. * sem_timedwait.c: Likewise. * sem_post.c: Likewise. * sem_wait.c: Likewise. * nptl 0.3 released. * Makefile (tests): Add tst-signal3. * tst-signal3.c: New file. 2002-10-05 Ulrich Drepper <drepper@redhat.com> * sysdeps/unix/sysv/linux/i386/lowlevelsem.h: Tell the compiler that the asms modify the sem object. (__lll_sem_timedwait): Now takes struct sem* as first parameter. * sysdeps/unix/sysv/linux/i386/bits/semaphore.h (sem_t): Don't expose the actual members. * pthreadP.h (struct sem): New type. Actual semaphore type. * semaphoreP.h: Include pthreadP.h. * sem_getvalue.c: Adjust to sem_t change. * sem_init.c: Likewise. * sem_open.c: Likewise. * sem_post.c: Likewise. * sem_timedwait.c: Likewise. * sem_trywait.c: Likewise. * sem_wait.c: Likewise. 2002-10-04 Ulrich Drepper <drepper@redhat.com> * Makefile (tests): Add tst-basic2, tst-exec1, tst-exec3, tst-exec3. * tst-basic2.c: New file. * tst-exec1.c: New file. * tst-exec2.c: New file. * tst-exec3.c: New file. * tst-fork1.c: Remove extra */. * nptl 0.2 released. The API for IA-32 is complete.
2002-11-26 22:50:54 +00:00
extra-libs = libthread_db
extra-libs-others := $(extra-libs)
headers = proc_service.h thread_db.h sys/procfs.h
Initial revision 2002-11-26 Ulrich Drepper <drepper@redhat.com> * allocatestack.c (queue_stack): Don't remove stack from list here. Do it in the caller. Correct condition to prematurely terminate loop to free stacks. (__deallocate_stack): Remove stack from list here. 2002-11-26 Ulrich Drepper <drepper@redhat.com> * Makefile (tests): Add tst-stack1. * tst-stack1.c: New file. * allocatestack.c (allocate_stack): Initialize the TCB on a user provided stack. * pthread_attr_getstack.c: Return bottom of the thread area. 2002-11-25 Ulrich Drepper <drepper@redhat.com> * Makefile (libpthread-routines): Add pt-allocrtsig and pthread_kill_other_threads. * pt-allocrtsig.c: New file. * pthread_kill_other_threads.c: New file. * sysdeps/unix/sysv/linux/allocrtsig.c: Add additional aliases for all three functions. * sysdeps/unix/sysv/linux/Makefile (sysdep_routines): Remove allocrtsig. * sysdeps/unix/sysv/linux/Versions (libc:GLIBC_PRIVATE): Export __libc_current_sigrtmin_private, __libc_current_sigrtmax_private, and __libc_allocate_rtsig_private. * Versions (libpthread): Export pthread_kill_other_threads_np, __libc_current_sigrtmin, and __libc_current_sigrtmax. 2002-11-24 Ulrich Drepper <drepper@redhat.com> * allocatestack.c (allocate_stack): stackaddr in attribute points to the end of the stack. Adjust computations. When mprotect call fails dequeue stack and free it. * pthread_attr_setstack.c: Store top of the stack in stackaddr attribute. * pthread_getattr_np.c: Likewise. * descr.h (IS_DETACHED): Add some more parenthesis to prevent surprises. 2002-11-23 Ulrich Drepper <drepper@redhat.com> * sysdeps/pthread/pthread.h (pthread_self): __THROW must come before attribute definitions. Patch by Luca Barbieri <ldb@ldb.ods.org>. 2002-11-22 Ulrich Drepper <drepper@redhat.com> * pthread_getspecific.c: Optimize access to first 2nd-level array. * pthread_setspecific.c: Likewise. 2002-11-21 Ulrich Drepper <drepper@redhat.com> * sysdeps/unix/sysv/linux/i386/createthread.c: Remove CLONE_ flags definitions. Get them from the official place. * sysdeps/unix/sysv/linux/i386/fork.c: Likewise. * sysdeps/unix/sysv/linux/i386/createthread.c: Update CLONE_* flags. Use new CLONE_ flags in clone() calls. * sysdeps/unix/sysv/linux/fork.c: Use ARCH_FORK to actually fork. * sysdeps/unix/sysv/linux/i386/fork.c: New file. * Versions: Add pthread_* functions for libc. * forward.c: New file. * sysdeps/pthread/Makefile (libpthread-sysdeps_routines): Add errno-loc. * herrno.c: New file. * res.c: New file. * Makefile (libpthread-routines): Remove sem_post, sem_wait, sem_trywait, and sem_timedwait. Add herrno and res. * sem_init.c: Don't initialize lock and waiters members. * sem_open.c: Likewise. * sem_post.c: Removed. * sem_wait.c: Removed. * sem_trywait.c: Removed. * sem_timedwait.c: Removed. * sysdeps/unix/sysv/linux/i386/i486/lowlevelsem.S: Complete rewrite. Includes full implementations of sem_post, sem_wait, sem_trywait, and sem_timedwait. * sysdeps/unix/sysv/linux/i386/lowlevelsem.h (lll_sem_post): Adjust for new implementation. * sysdeps/unix/sysv/linux/internaltypes.h (struct sem): Remove lock and waiters fields. * tst-sem3.c: Improve error message. * tst-signal3.c: Likewise. * init.c (__pthread_initialize_minimal): Use set_tid_address syscall to tell the kernel about the termination futex and to initialize tid member. Don't initialize main_thread. * descr.h (struct pthread): Remove main_thread member. * cancelllation.c (__do_cancel): Remove code handling main thread. The main thread is not special anymore. * allocatestack.c (__reclaim_stacks): Mark stacks as unused. Add size of the stacks to stack_cache_actsize. * pt-readv.c: Add missing "defined". * pt-sigwait.c: Likewise. * pt-writev.c: Likewise. 2002-11-09 Ulrich Drepper <drepper@redhat.com> * Versions: Export __connect from libpthread. Patch by Luca Barbieri <ldb@ldb.ods.org>. * Makefile (libpthread-routines): Add pt-raise. * sysdeps/unix/sysv/linux/raise.c: New file. * sysdeps/unix/sysv/linux/pt-raise.c: New file. * sysdeps/generic/pt-raise.c: New file. * pthread_cond_init.c: Initialize all data elements of the condvar structure. Patch by Luca Barbieri <ldb@ldb.ods.org>. * pthread_attr_init.c: Actually implement 2.0 compatibility version. * pthread_create.c: Likewise. * Makefile (tests): Add tst-key1, tst-key2, tst-key3. * tst-key1.c: New file. * tst-key2.c: New file. * tst-key3.c: New file. * Versions: Export pthread_detach for version GLIBC_2.0. Reported by Saurabh Desai <sdesai@austin.ibm.com>. 2002-11-08 Ulrich Drepper <drepper@redhat.com> * pthread_key_create.c: Terminate search after an unused key was found. Patch by Luca Barbieri <ldb@ldb.ods.org>. * sysdeps/unix/sysv/linux/i386/pthread_once.S: Return zero. Patch by Luca Barbieri <ldb@ldb.ods.org>. 2002-10-10 Ulrich Drepper <drepper@redhat.com> * sysdeps/unix/sysv/linux/i386/i486/lowlevelsem.S: Use slow generic dynamic lookup for errno in PIC. * allocatestack.c (get_cached_stack): Rearrange code slightly to release the stack lock as soon as possible. Call _dl_allocate_tls_init for TCB from the cache to re-initialize the static TLS block. (allocate_stack): Call _dl_allocate_tls_init for user-provided stack. * cancellation.c: Renamed from cancelation.c. * Makefile: Adjust accordingly. * pthreadP.h (CANCELLATION_P): Renamed from CANCELATION_P. * cleanup_defer.c: Use CANCELLATION_P. * pthread_testcancel.c: Likewise. * descr.h: Fix spelling in comments. * init.c: Likewise. * pthread_getattr_np.c: Likewise. * pthread_getschedparam.c: Likewise. * pthread_setschedparam.c: Likewise. * Versions: Likewise. * pt-pselect.c: New file. * Makefile (libpthread-routines): Add pt-pselect. * Versions: Add pselect. * tst-cancel4.c: New file. * Makefile (tests): Add tst-cancel4. 2002-10-09 Ulrich Drepper <drepper@redhat.com> * pthread_mutex_lock.c: Always record lock ownership. * pthread_mutex_timedlock.c: Likewise. * pthread_mutex_trylock.c: Likewise. * pt-readv.c: New file. * pt-writev.c: New file. * pt-creat.c: New file. * pt-msgrcv.c: New file. * pt-msgsnd.c: New file. * pt-poll.c: New file. * pt-select.c: New file. * pt-sigpause.c: New file. * pt-sigsuspend.c: New file. * pt-sigwait.c: New file. * pt-sigwaitinfo.c: New file. * pt-waitid.c: New file. * Makefile (libpthread-routines): Add pt-readv, pt-writev, pt-creat, pt-msgrcv, pt-msgsnd, pt-poll, pt-select, pt-sigpause, pt-sigsuspend, pt-sigwait, pt-sigwaitinfo, and pt-waitid. * Versions: Add all the new functions. * tst-exit1.c: New file. * Makefile (tests): Add tst-exit1. * sem_timedwait.c: Minor optimization for more optimal fastpath. 2002-10-08 Ulrich Drepper <drepper@redhat.com> * pt-fcntl.c: Only enable asynchronous cancellation for F_SETLKW. * pthread_join.c: Enable asynchronous cancellation around lll_wait_tid call. pthread_join is an official cancellation point. * pthread_timedjoin.c: Likewise. * pthread_cond_wait.c: Revert order in which internal lock are dropped and the condvar's mutex are retrieved. * pthread_cond_timedwait.c: Likewise. Reported by dice@saros.East.Sun.COM. 2002-10-07 Ulrich Drepper <drepper@redhat.com> * pthreadP.h: Cut out all type definitions and move them... * sysdeps/unix/sysv/linux/internaltypes.h: ...here. New file. * pthreadP.h: Include <internaltypes.h>. * sysdeps/unix/sysv/linux/i386/lowlevelsem.h (lll_sem_post): Little performance tweaks. * sem_trywait.c: Shuffle #includes around to get right order. * sem_timedwait.c: Likewise. * sem_post.c: Likewise. * sem_wait.c: Likewise. * nptl 0.3 released. * Makefile (tests): Add tst-signal3. * tst-signal3.c: New file. 2002-10-05 Ulrich Drepper <drepper@redhat.com> * sysdeps/unix/sysv/linux/i386/lowlevelsem.h: Tell the compiler that the asms modify the sem object. (__lll_sem_timedwait): Now takes struct sem* as first parameter. * sysdeps/unix/sysv/linux/i386/bits/semaphore.h (sem_t): Don't expose the actual members. * pthreadP.h (struct sem): New type. Actual semaphore type. * semaphoreP.h: Include pthreadP.h. * sem_getvalue.c: Adjust to sem_t change. * sem_init.c: Likewise. * sem_open.c: Likewise. * sem_post.c: Likewise. * sem_timedwait.c: Likewise. * sem_trywait.c: Likewise. * sem_wait.c: Likewise. 2002-10-04 Ulrich Drepper <drepper@redhat.com> * Makefile (tests): Add tst-basic2, tst-exec1, tst-exec3, tst-exec3. * tst-basic2.c: New file. * tst-exec1.c: New file. * tst-exec2.c: New file. * tst-exec3.c: New file. * tst-fork1.c: Remove extra */. * nptl 0.2 released. The API for IA-32 is complete.
2002-11-26 22:50:54 +00:00
libthread_db-routines = td_init td_log td_ta_new td_ta_delete \
td_ta_get_nthreads td_ta_get_ph \
td_ta_map_id2thr td_ta_map_lwp2thr \
td_ta_thr_iter td_ta_tsd_iter \
td_thr_get_info td_thr_getfpregs td_thr_getgregs \
td_thr_getxregs td_thr_getxregsize td_thr_setfpregs \
td_thr_setgregs td_thr_setprio td_thr_setsigpending \
td_thr_setxregs td_thr_sigsetmask td_thr_tsd \
td_thr_validate td_thr_dbsuspend td_thr_dbresume \
td_ta_setconcurrency td_ta_enable_stats \
td_ta_reset_stats td_ta_get_stats td_ta_event_addr \
td_thr_event_enable td_thr_set_event \
td_thr_clear_event td_thr_event_getmsg \
td_ta_set_event td_ta_event_getmsg \
td_ta_clear_event td_symbol_list \
td_thr_tlsbase td_thr_tls_get_addr \
fetch-value
Initial revision 2002-11-26 Ulrich Drepper <drepper@redhat.com> * allocatestack.c (queue_stack): Don't remove stack from list here. Do it in the caller. Correct condition to prematurely terminate loop to free stacks. (__deallocate_stack): Remove stack from list here. 2002-11-26 Ulrich Drepper <drepper@redhat.com> * Makefile (tests): Add tst-stack1. * tst-stack1.c: New file. * allocatestack.c (allocate_stack): Initialize the TCB on a user provided stack. * pthread_attr_getstack.c: Return bottom of the thread area. 2002-11-25 Ulrich Drepper <drepper@redhat.com> * Makefile (libpthread-routines): Add pt-allocrtsig and pthread_kill_other_threads. * pt-allocrtsig.c: New file. * pthread_kill_other_threads.c: New file. * sysdeps/unix/sysv/linux/allocrtsig.c: Add additional aliases for all three functions. * sysdeps/unix/sysv/linux/Makefile (sysdep_routines): Remove allocrtsig. * sysdeps/unix/sysv/linux/Versions (libc:GLIBC_PRIVATE): Export __libc_current_sigrtmin_private, __libc_current_sigrtmax_private, and __libc_allocate_rtsig_private. * Versions (libpthread): Export pthread_kill_other_threads_np, __libc_current_sigrtmin, and __libc_current_sigrtmax. 2002-11-24 Ulrich Drepper <drepper@redhat.com> * allocatestack.c (allocate_stack): stackaddr in attribute points to the end of the stack. Adjust computations. When mprotect call fails dequeue stack and free it. * pthread_attr_setstack.c: Store top of the stack in stackaddr attribute. * pthread_getattr_np.c: Likewise. * descr.h (IS_DETACHED): Add some more parenthesis to prevent surprises. 2002-11-23 Ulrich Drepper <drepper@redhat.com> * sysdeps/pthread/pthread.h (pthread_self): __THROW must come before attribute definitions. Patch by Luca Barbieri <ldb@ldb.ods.org>. 2002-11-22 Ulrich Drepper <drepper@redhat.com> * pthread_getspecific.c: Optimize access to first 2nd-level array. * pthread_setspecific.c: Likewise. 2002-11-21 Ulrich Drepper <drepper@redhat.com> * sysdeps/unix/sysv/linux/i386/createthread.c: Remove CLONE_ flags definitions. Get them from the official place. * sysdeps/unix/sysv/linux/i386/fork.c: Likewise. * sysdeps/unix/sysv/linux/i386/createthread.c: Update CLONE_* flags. Use new CLONE_ flags in clone() calls. * sysdeps/unix/sysv/linux/fork.c: Use ARCH_FORK to actually fork. * sysdeps/unix/sysv/linux/i386/fork.c: New file. * Versions: Add pthread_* functions for libc. * forward.c: New file. * sysdeps/pthread/Makefile (libpthread-sysdeps_routines): Add errno-loc. * herrno.c: New file. * res.c: New file. * Makefile (libpthread-routines): Remove sem_post, sem_wait, sem_trywait, and sem_timedwait. Add herrno and res. * sem_init.c: Don't initialize lock and waiters members. * sem_open.c: Likewise. * sem_post.c: Removed. * sem_wait.c: Removed. * sem_trywait.c: Removed. * sem_timedwait.c: Removed. * sysdeps/unix/sysv/linux/i386/i486/lowlevelsem.S: Complete rewrite. Includes full implementations of sem_post, sem_wait, sem_trywait, and sem_timedwait. * sysdeps/unix/sysv/linux/i386/lowlevelsem.h (lll_sem_post): Adjust for new implementation. * sysdeps/unix/sysv/linux/internaltypes.h (struct sem): Remove lock and waiters fields. * tst-sem3.c: Improve error message. * tst-signal3.c: Likewise. * init.c (__pthread_initialize_minimal): Use set_tid_address syscall to tell the kernel about the termination futex and to initialize tid member. Don't initialize main_thread. * descr.h (struct pthread): Remove main_thread member. * cancelllation.c (__do_cancel): Remove code handling main thread. The main thread is not special anymore. * allocatestack.c (__reclaim_stacks): Mark stacks as unused. Add size of the stacks to stack_cache_actsize. * pt-readv.c: Add missing "defined". * pt-sigwait.c: Likewise. * pt-writev.c: Likewise. 2002-11-09 Ulrich Drepper <drepper@redhat.com> * Versions: Export __connect from libpthread. Patch by Luca Barbieri <ldb@ldb.ods.org>. * Makefile (libpthread-routines): Add pt-raise. * sysdeps/unix/sysv/linux/raise.c: New file. * sysdeps/unix/sysv/linux/pt-raise.c: New file. * sysdeps/generic/pt-raise.c: New file. * pthread_cond_init.c: Initialize all data elements of the condvar structure. Patch by Luca Barbieri <ldb@ldb.ods.org>. * pthread_attr_init.c: Actually implement 2.0 compatibility version. * pthread_create.c: Likewise. * Makefile (tests): Add tst-key1, tst-key2, tst-key3. * tst-key1.c: New file. * tst-key2.c: New file. * tst-key3.c: New file. * Versions: Export pthread_detach for version GLIBC_2.0. Reported by Saurabh Desai <sdesai@austin.ibm.com>. 2002-11-08 Ulrich Drepper <drepper@redhat.com> * pthread_key_create.c: Terminate search after an unused key was found. Patch by Luca Barbieri <ldb@ldb.ods.org>. * sysdeps/unix/sysv/linux/i386/pthread_once.S: Return zero. Patch by Luca Barbieri <ldb@ldb.ods.org>. 2002-10-10 Ulrich Drepper <drepper@redhat.com> * sysdeps/unix/sysv/linux/i386/i486/lowlevelsem.S: Use slow generic dynamic lookup for errno in PIC. * allocatestack.c (get_cached_stack): Rearrange code slightly to release the stack lock as soon as possible. Call _dl_allocate_tls_init for TCB from the cache to re-initialize the static TLS block. (allocate_stack): Call _dl_allocate_tls_init for user-provided stack. * cancellation.c: Renamed from cancelation.c. * Makefile: Adjust accordingly. * pthreadP.h (CANCELLATION_P): Renamed from CANCELATION_P. * cleanup_defer.c: Use CANCELLATION_P. * pthread_testcancel.c: Likewise. * descr.h: Fix spelling in comments. * init.c: Likewise. * pthread_getattr_np.c: Likewise. * pthread_getschedparam.c: Likewise. * pthread_setschedparam.c: Likewise. * Versions: Likewise. * pt-pselect.c: New file. * Makefile (libpthread-routines): Add pt-pselect. * Versions: Add pselect. * tst-cancel4.c: New file. * Makefile (tests): Add tst-cancel4. 2002-10-09 Ulrich Drepper <drepper@redhat.com> * pthread_mutex_lock.c: Always record lock ownership. * pthread_mutex_timedlock.c: Likewise. * pthread_mutex_trylock.c: Likewise. * pt-readv.c: New file. * pt-writev.c: New file. * pt-creat.c: New file. * pt-msgrcv.c: New file. * pt-msgsnd.c: New file. * pt-poll.c: New file. * pt-select.c: New file. * pt-sigpause.c: New file. * pt-sigsuspend.c: New file. * pt-sigwait.c: New file. * pt-sigwaitinfo.c: New file. * pt-waitid.c: New file. * Makefile (libpthread-routines): Add pt-readv, pt-writev, pt-creat, pt-msgrcv, pt-msgsnd, pt-poll, pt-select, pt-sigpause, pt-sigsuspend, pt-sigwait, pt-sigwaitinfo, and pt-waitid. * Versions: Add all the new functions. * tst-exit1.c: New file. * Makefile (tests): Add tst-exit1. * sem_timedwait.c: Minor optimization for more optimal fastpath. 2002-10-08 Ulrich Drepper <drepper@redhat.com> * pt-fcntl.c: Only enable asynchronous cancellation for F_SETLKW. * pthread_join.c: Enable asynchronous cancellation around lll_wait_tid call. pthread_join is an official cancellation point. * pthread_timedjoin.c: Likewise. * pthread_cond_wait.c: Revert order in which internal lock are dropped and the condvar's mutex are retrieved. * pthread_cond_timedwait.c: Likewise. Reported by dice@saros.East.Sun.COM. 2002-10-07 Ulrich Drepper <drepper@redhat.com> * pthreadP.h: Cut out all type definitions and move them... * sysdeps/unix/sysv/linux/internaltypes.h: ...here. New file. * pthreadP.h: Include <internaltypes.h>. * sysdeps/unix/sysv/linux/i386/lowlevelsem.h (lll_sem_post): Little performance tweaks. * sem_trywait.c: Shuffle #includes around to get right order. * sem_timedwait.c: Likewise. * sem_post.c: Likewise. * sem_wait.c: Likewise. * nptl 0.3 released. * Makefile (tests): Add tst-signal3. * tst-signal3.c: New file. 2002-10-05 Ulrich Drepper <drepper@redhat.com> * sysdeps/unix/sysv/linux/i386/lowlevelsem.h: Tell the compiler that the asms modify the sem object. (__lll_sem_timedwait): Now takes struct sem* as first parameter. * sysdeps/unix/sysv/linux/i386/bits/semaphore.h (sem_t): Don't expose the actual members. * pthreadP.h (struct sem): New type. Actual semaphore type. * semaphoreP.h: Include pthreadP.h. * sem_getvalue.c: Adjust to sem_t change. * sem_init.c: Likewise. * sem_open.c: Likewise. * sem_post.c: Likewise. * sem_timedwait.c: Likewise. * sem_trywait.c: Likewise. * sem_wait.c: Likewise. 2002-10-04 Ulrich Drepper <drepper@redhat.com> * Makefile (tests): Add tst-basic2, tst-exec1, tst-exec3, tst-exec3. * tst-basic2.c: New file. * tst-exec1.c: New file. * tst-exec2.c: New file. * tst-exec3.c: New file. * tst-fork1.c: Remove extra */. * nptl 0.2 released. The API for IA-32 is complete.
2002-11-26 22:50:54 +00:00
libthread_db-inhibit-o = $(filter-out .os,$(object-suffixes))
# The ps_* callback functions are not defined.
libthread_db.so-no-z-defs = yes
# This is a hack. This is not the correct solution. When this glibc
# is tested, the gdb used could be loaded by the host glibc, which
# may not support DT_RELR, and report a failure instead of unsupported.
# For now, build this without DT_RELR support to avoid this situation.
libthread_db.so-no-dt-relr = yes
Enumerate tests with special rules in tests-special variable. This patch is a revised and updated version of <https://sourceware.org/ml/libc-alpha/2014-01/msg00196.html>. In order to generate overall summaries of the results of all tests in the glibc testsuite, we need to identify and concatenate the files with the results of individual tests. Tomas Dohnalek's patch used $(common-objpfx)*/*.test-result for this. However, the normal glibc approach is explicit enumeration of the expected set of files with a given property, rather than all files matching some pattern like that. Furthermore, we would like to be able to mark tests as UNRESOLVED if the file with their results is for some reason missing, and in future we would like to be able to mark tests as UNSUPPORTED if they are disabled for a particular configuration (rather than simply having them missing from the list of tests as at present). Such handling of tests that were not run or did not record results requires an explicit enumeration of tests. For the tests following the default makefile rules, $(tests) (and $(xtests)) provides such an enumeration. Others, however, are added directly as dependencies of the "tests" and "xtests" makefile targets. This patch changes the makefiles to put them in variables tests-special and xtests-special, with appropriate dependencies on the tests listed there then being added centrally. Those variables are used in Rules and so need to be set before Rules is included in a subdirectory makefile, which is often earlier in the makefile than the dependencies were present before. We previously discussed the question of where to include Rules; see the question at <https://sourceware.org/ml/libc-alpha/2012-11/msg00798.html>, and a discussion in <https://sourceware.org/ml/libc-alpha/2013-01/msg00337.html> of why Rules is included early rather than late in subdirectory makefiles. It was necessary to avoid an indirection through the check-abi target and get the check-abi-* targets for individual libraries into the tests-special variable. The intl/ test $(objpfx)tst-gettext.out, previously built only because of dependencies from other tests, was also added to tests-special for the same reason. The entries in tests-special are the full makefile targets, complete with $(objpfx) and .out. If a future change causes tests to be named consistently with a .out suffix, this can be changed to include just the path relative to $(objpfx), without .out. Tested x86_64, including that the same set of files is generated in the build directory by a build and testsuite run both before and after the patch (except for changes to the elf/tst-null-argv.debug.out.<number> file name), and a build with run-built-tests=no to verify there aren't any more obvious instances of the issue Marcus Shawcroft reported with a previous version in <https://sourceware.org/ml/libc-alpha/2014-01/msg00462.html>. * Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. (tests): Depend on $(tests-special). * Makerules (check-abi-list): New variable. (check-abi): Depend on $(check-abi-list). [$(subdir) = elf] (tests-special): Add $(objpfx)check-abi-libc.out. [$(build-shared) = yes && subdir] (tests-special): Add $(check-abi-list). [$(build-shared) = yes && subdir] (tests): Do not depend on check-abi. * Rules (tests): Depend on $(tests-special). (xtests): Depend on $(xtests-special). * catgets/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * conform/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * elf/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * grp/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * iconv/Makefile (xtests): Change dependencies to .... (xtests-special): ... additions to this variable. * iconvdata/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * intl/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. Also add $(objpfx)tst-gettext.out. * io/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * libio/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * malloc/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * misc/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * nptl/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * nptl_db/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * posix/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. (xtests): Change dependencies to .... (xtests-special): ... additions to this variable. * resolv/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. (xtests): Change dependencies to .... (xtests-special): ... additions to this variable. * stdio-common/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. (do-tst-unbputc): Remove target. (do-tst-printf): Likewise. * stdlib/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * string/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * sysdeps/x86/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. localedata: * Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable.
2014-03-06 22:35:33 +00:00
tests-special += $(objpfx)db-symbols.out
Initial revision 2002-11-26 Ulrich Drepper <drepper@redhat.com> * allocatestack.c (queue_stack): Don't remove stack from list here. Do it in the caller. Correct condition to prematurely terminate loop to free stacks. (__deallocate_stack): Remove stack from list here. 2002-11-26 Ulrich Drepper <drepper@redhat.com> * Makefile (tests): Add tst-stack1. * tst-stack1.c: New file. * allocatestack.c (allocate_stack): Initialize the TCB on a user provided stack. * pthread_attr_getstack.c: Return bottom of the thread area. 2002-11-25 Ulrich Drepper <drepper@redhat.com> * Makefile (libpthread-routines): Add pt-allocrtsig and pthread_kill_other_threads. * pt-allocrtsig.c: New file. * pthread_kill_other_threads.c: New file. * sysdeps/unix/sysv/linux/allocrtsig.c: Add additional aliases for all three functions. * sysdeps/unix/sysv/linux/Makefile (sysdep_routines): Remove allocrtsig. * sysdeps/unix/sysv/linux/Versions (libc:GLIBC_PRIVATE): Export __libc_current_sigrtmin_private, __libc_current_sigrtmax_private, and __libc_allocate_rtsig_private. * Versions (libpthread): Export pthread_kill_other_threads_np, __libc_current_sigrtmin, and __libc_current_sigrtmax. 2002-11-24 Ulrich Drepper <drepper@redhat.com> * allocatestack.c (allocate_stack): stackaddr in attribute points to the end of the stack. Adjust computations. When mprotect call fails dequeue stack and free it. * pthread_attr_setstack.c: Store top of the stack in stackaddr attribute. * pthread_getattr_np.c: Likewise. * descr.h (IS_DETACHED): Add some more parenthesis to prevent surprises. 2002-11-23 Ulrich Drepper <drepper@redhat.com> * sysdeps/pthread/pthread.h (pthread_self): __THROW must come before attribute definitions. Patch by Luca Barbieri <ldb@ldb.ods.org>. 2002-11-22 Ulrich Drepper <drepper@redhat.com> * pthread_getspecific.c: Optimize access to first 2nd-level array. * pthread_setspecific.c: Likewise. 2002-11-21 Ulrich Drepper <drepper@redhat.com> * sysdeps/unix/sysv/linux/i386/createthread.c: Remove CLONE_ flags definitions. Get them from the official place. * sysdeps/unix/sysv/linux/i386/fork.c: Likewise. * sysdeps/unix/sysv/linux/i386/createthread.c: Update CLONE_* flags. Use new CLONE_ flags in clone() calls. * sysdeps/unix/sysv/linux/fork.c: Use ARCH_FORK to actually fork. * sysdeps/unix/sysv/linux/i386/fork.c: New file. * Versions: Add pthread_* functions for libc. * forward.c: New file. * sysdeps/pthread/Makefile (libpthread-sysdeps_routines): Add errno-loc. * herrno.c: New file. * res.c: New file. * Makefile (libpthread-routines): Remove sem_post, sem_wait, sem_trywait, and sem_timedwait. Add herrno and res. * sem_init.c: Don't initialize lock and waiters members. * sem_open.c: Likewise. * sem_post.c: Removed. * sem_wait.c: Removed. * sem_trywait.c: Removed. * sem_timedwait.c: Removed. * sysdeps/unix/sysv/linux/i386/i486/lowlevelsem.S: Complete rewrite. Includes full implementations of sem_post, sem_wait, sem_trywait, and sem_timedwait. * sysdeps/unix/sysv/linux/i386/lowlevelsem.h (lll_sem_post): Adjust for new implementation. * sysdeps/unix/sysv/linux/internaltypes.h (struct sem): Remove lock and waiters fields. * tst-sem3.c: Improve error message. * tst-signal3.c: Likewise. * init.c (__pthread_initialize_minimal): Use set_tid_address syscall to tell the kernel about the termination futex and to initialize tid member. Don't initialize main_thread. * descr.h (struct pthread): Remove main_thread member. * cancelllation.c (__do_cancel): Remove code handling main thread. The main thread is not special anymore. * allocatestack.c (__reclaim_stacks): Mark stacks as unused. Add size of the stacks to stack_cache_actsize. * pt-readv.c: Add missing "defined". * pt-sigwait.c: Likewise. * pt-writev.c: Likewise. 2002-11-09 Ulrich Drepper <drepper@redhat.com> * Versions: Export __connect from libpthread. Patch by Luca Barbieri <ldb@ldb.ods.org>. * Makefile (libpthread-routines): Add pt-raise. * sysdeps/unix/sysv/linux/raise.c: New file. * sysdeps/unix/sysv/linux/pt-raise.c: New file. * sysdeps/generic/pt-raise.c: New file. * pthread_cond_init.c: Initialize all data elements of the condvar structure. Patch by Luca Barbieri <ldb@ldb.ods.org>. * pthread_attr_init.c: Actually implement 2.0 compatibility version. * pthread_create.c: Likewise. * Makefile (tests): Add tst-key1, tst-key2, tst-key3. * tst-key1.c: New file. * tst-key2.c: New file. * tst-key3.c: New file. * Versions: Export pthread_detach for version GLIBC_2.0. Reported by Saurabh Desai <sdesai@austin.ibm.com>. 2002-11-08 Ulrich Drepper <drepper@redhat.com> * pthread_key_create.c: Terminate search after an unused key was found. Patch by Luca Barbieri <ldb@ldb.ods.org>. * sysdeps/unix/sysv/linux/i386/pthread_once.S: Return zero. Patch by Luca Barbieri <ldb@ldb.ods.org>. 2002-10-10 Ulrich Drepper <drepper@redhat.com> * sysdeps/unix/sysv/linux/i386/i486/lowlevelsem.S: Use slow generic dynamic lookup for errno in PIC. * allocatestack.c (get_cached_stack): Rearrange code slightly to release the stack lock as soon as possible. Call _dl_allocate_tls_init for TCB from the cache to re-initialize the static TLS block. (allocate_stack): Call _dl_allocate_tls_init for user-provided stack. * cancellation.c: Renamed from cancelation.c. * Makefile: Adjust accordingly. * pthreadP.h (CANCELLATION_P): Renamed from CANCELATION_P. * cleanup_defer.c: Use CANCELLATION_P. * pthread_testcancel.c: Likewise. * descr.h: Fix spelling in comments. * init.c: Likewise. * pthread_getattr_np.c: Likewise. * pthread_getschedparam.c: Likewise. * pthread_setschedparam.c: Likewise. * Versions: Likewise. * pt-pselect.c: New file. * Makefile (libpthread-routines): Add pt-pselect. * Versions: Add pselect. * tst-cancel4.c: New file. * Makefile (tests): Add tst-cancel4. 2002-10-09 Ulrich Drepper <drepper@redhat.com> * pthread_mutex_lock.c: Always record lock ownership. * pthread_mutex_timedlock.c: Likewise. * pthread_mutex_trylock.c: Likewise. * pt-readv.c: New file. * pt-writev.c: New file. * pt-creat.c: New file. * pt-msgrcv.c: New file. * pt-msgsnd.c: New file. * pt-poll.c: New file. * pt-select.c: New file. * pt-sigpause.c: New file. * pt-sigsuspend.c: New file. * pt-sigwait.c: New file. * pt-sigwaitinfo.c: New file. * pt-waitid.c: New file. * Makefile (libpthread-routines): Add pt-readv, pt-writev, pt-creat, pt-msgrcv, pt-msgsnd, pt-poll, pt-select, pt-sigpause, pt-sigsuspend, pt-sigwait, pt-sigwaitinfo, and pt-waitid. * Versions: Add all the new functions. * tst-exit1.c: New file. * Makefile (tests): Add tst-exit1. * sem_timedwait.c: Minor optimization for more optimal fastpath. 2002-10-08 Ulrich Drepper <drepper@redhat.com> * pt-fcntl.c: Only enable asynchronous cancellation for F_SETLKW. * pthread_join.c: Enable asynchronous cancellation around lll_wait_tid call. pthread_join is an official cancellation point. * pthread_timedjoin.c: Likewise. * pthread_cond_wait.c: Revert order in which internal lock are dropped and the condvar's mutex are retrieved. * pthread_cond_timedwait.c: Likewise. Reported by dice@saros.East.Sun.COM. 2002-10-07 Ulrich Drepper <drepper@redhat.com> * pthreadP.h: Cut out all type definitions and move them... * sysdeps/unix/sysv/linux/internaltypes.h: ...here. New file. * pthreadP.h: Include <internaltypes.h>. * sysdeps/unix/sysv/linux/i386/lowlevelsem.h (lll_sem_post): Little performance tweaks. * sem_trywait.c: Shuffle #includes around to get right order. * sem_timedwait.c: Likewise. * sem_post.c: Likewise. * sem_wait.c: Likewise. * nptl 0.3 released. * Makefile (tests): Add tst-signal3. * tst-signal3.c: New file. 2002-10-05 Ulrich Drepper <drepper@redhat.com> * sysdeps/unix/sysv/linux/i386/lowlevelsem.h: Tell the compiler that the asms modify the sem object. (__lll_sem_timedwait): Now takes struct sem* as first parameter. * sysdeps/unix/sysv/linux/i386/bits/semaphore.h (sem_t): Don't expose the actual members. * pthreadP.h (struct sem): New type. Actual semaphore type. * semaphoreP.h: Include pthreadP.h. * sem_getvalue.c: Adjust to sem_t change. * sem_init.c: Likewise. * sem_open.c: Likewise. * sem_post.c: Likewise. * sem_timedwait.c: Likewise. * sem_trywait.c: Likewise. * sem_wait.c: Likewise. 2002-10-04 Ulrich Drepper <drepper@redhat.com> * Makefile (tests): Add tst-basic2, tst-exec1, tst-exec3, tst-exec3. * tst-basic2.c: New file. * tst-exec1.c: New file. * tst-exec2.c: New file. * tst-exec3.c: New file. * tst-fork1.c: Remove extra */. * nptl 0.2 released. The API for IA-32 is complete.
2002-11-26 22:50:54 +00:00
include ../Rules
$(objpfx)db-symbols.out: $(objpfx)db-symbols.v.i \
$(objpfx)libc.symlist-private
LC_ALL=C $(AWK) -f $^ > $@; \
Generate .test-result files for tests with special rules. This patch, an updated version of <https://sourceware.org/ml/libc-alpha/2014-01/msg00194.html> now proposed for inclusion in glibc, extends the generation of PASS and FAIL status in .test-result files for individual tests to cover tests with their own custom makefile rules. This is just adding $(evaluate-test) calls to all such rules, since tests with multiple commands were previously split into separate tests. Note that the tests the makefiles expect to fail (posix/annexc and conformtest) currently get FAIL listed in the .test-result file, rather than XFAIL; a subsequent patch will introduce a better XFAIL mechanism. Tested x86_64. * Makefile ($(objpfx)c++-types-check.out): Use $(evaluate-test). ($(objpfx)check-local-headers.out): Likewise. ($(objpfx)begin-end-check.out): Likewise. * Makerules (check-abi-%.out): Likewise. * catgets/Makefile ($(objpfx)test1.cat): Likewise. ($(objpfx)test2.cat): Likewise. ($(objpfx)de/libc.cat): Likewise. ($(objpfx)test-gencat.out): Likewise. * conform/Makefile ($(objpfx)run-conformtest.out): Likewise. * elf/Makefile ($(objpfx)order-cmp.out): Likewise. ($(objpfx)noload-mem): Likewise. ($(objpfx)tst-pathopt.out): Likewise. ($(objpfx)tst-rtld-load-self.out): Likewise. ($(objpfx)tst-array1-cmp.out): Likewise. ($(objpfx)tst-array1-static-cmp.out): Likewise. ($(objpfx)tst-array2-cmp.out): Likewise. ($(objpfx)tst-array3-cmp.out): Likewise. ($(objpfx)tst-array4-cmp.out): Likewise. ($(objpfx)tst-array5-cmp.out): Likewise. ($(objpfx)tst-array5-static-cmp.out): Likewise. ($(objpfx)check-textrel.out): Likewise. ($(objpfx)check-execstack.out): Likewise. ($(objpfx)check-localplt.out): Likewise. ($(objpfx)order2-cmp.out): Likewise. ($(objpfx)tst-leaks1-mem): Likewise. ($(objpfx)tst-leaks1-static-mem): Likewise. ($(objpfx)tst-initorder-cmp.out): Likewise. ($(objpfx)tst-initorder2-cmp.out): Likewise. ($(objpfx)tst-unused-dep.out): Likewise. ($(objpfx)tst-unused-dep-cmp.out): Likewise. * grp/Makefile ($(objpfx)tst_fgetgrent.out): Likewise. * iconv/Makefile (test-iconvconfig): Likewise. * iconvdata/Makefile ($(objpfx)mtrace-tst-loading): Likewise. ($(objpfx)iconv-test.out): Likewise. ($(objpfx)tst-tables.out): Likewise. * intl/Makefile ($(objpfx)mtrace-tst-gettext): Likewise. ($(objpfx)tst-gettext.out): Likewise. ($(objpfx)tst-translit.out): Likewise. ($(objpfx)tst-gettext2.out): Likewise. ($(objpfx)tst-gettext4.out): Likewise. ($(objpfx)tst-gettext6.out): Likewise. * io/Makefile ($(objpfx)ftwtest.out): Likewise. * libio/Makefile ($(objpfx)test-freopen.out): Likewise. ($(objpfx)tst-fopenloc-cmp.out): Likewise. ($(objpfx)tst-fopenloc-mem.out): Likewise. * malloc/Makefile ($(objpfx)tst-mtrace.out): Likewise. * misc/Makefile ($(objpfx)tst-error1-mem): Likewise. * posix/Makefile ($(objpfx)globtest.out): Likewise. ($(objpfx)wordexp-tst.out): Likewise. ($(objpfx)annexc.out): Likewise. ($(objpfx)tst-fnmatch-mem): Likewise. ($(objpfx)bug-regex2-mem): Likewise. ($(objpfx)bug-regex14-mem): Likewise. ($(objpfx)bug-regex21-mem): Likewise. ($(objpfx)bug-regex31-mem): Likewise. ($(objpfx)tst-vfork3-mem): Likewise. ($(objpfx)tst-rxspencer-no-utf8-mem): Likewise. ($(objpfx)tst-pcre-mem): Likewise. ($(objpfx)tst-boost-mem): Likewise. ($(objpfx)tst-getconf.out): Likewise. ($(objpfx)bug-ga2-mem): Likewise. ($(objpfx)bug-glob2-mem): Likewise. * resolv/Makefile ($(objpfx)mtrace-tst-leaks): Likewise. ($(objpfx)mtrace-tst-leaks2): Likewise. * stdio-common/Makefile ($(objpfx)tst-unbputc.out): Likewise. ($(objpfx)tst-printf.out): Likewise. ($(objpfx)tst-setvbuf1.out): Likewise. ($(objpfx)tst-setvbuf1-cmp.out): Likewise. * stdlib/Makefile ($(objpfx)isomac.out): Likewise. ($(objpfx)tst-fmtmsg.out): Likewise. * string/Makefile ($(objpfx)tst-svc-cmp.out): Likewise. * sysdeps/x86/Makefile ($(objpfx)tst-xmmymm.out): Likewise. localedata: * Makefile ($(objpfx)sort-test.out): Use $(evaluate-test). ($(objpfx)tst-fmon.out): Likewise. ($(objpfx)tst-numeric.out): Likewise. ($(objpfx)tst-locale.out): Likewise. ($(objpfx)tst-rpmatch.out): Likewise. ($(objpfx)tst-trans.out): Likewise. ($(objpfx)tst-mbswcs.out): Likewise. ($(objpfx)tst-ctype.out): Likewise. ($(objpfx)tst-wctype.out): Likewise. ($(objpfx)tst-langinfo.out): Likewise. ($(objpfx)mtrace-tst-leaks): Likewise. nptl: * Makefile ($(objpfx)tst-stack3-mem): Use $(evaluate-test). ($(objpfx)tst-tls6.out): Likewise. ($(objpfx)tst-cleanup0.out): Likewise. ($(objpfx)tst-cleanup0-cmp.out): Likewise. ($(objpfx)tst-cancel-wrappers.out): Likewise. ($(objpfx)tst-oddstacklimit.out): Likewise. nptl_db: * Makefile ($(objpfx)db-symbols.out): Use $(evaluate-test).
2014-02-21 21:48:08 +00:00
$(evaluate-test)
$(objpfx)db-symbols.v.i: db-symbols.awk
$(objpfx)libc.symlist-private: $(..)scripts/abilist.awk \
$(common-objpfx)libc.dynsym
LC_ALL=C $(AWK) -v include_private=1 -f $^ > $@T
mv -f $@T $@