glibc/bits/timesize.h

23 lines
974 B
C
Raw Normal View History

Y2038: provide size of default time_t for target architecture To determine whether the default time_t interfaces are 32-bit and so need conversions, or are 64-bit and so are compatible with the internal 64-bit type without conversions, a macro giving the size of the default time_t is also required. This macro is called __TIMESIZE. This macro can then be used instead of __WORDSIZE in msq-pad.h and shm-pad.h files, which in turn allows removing their x86 variants, and in sem-pad.h files but keeping the x86 variant. This patch was tested by running 'make check' on branch master then applying this patch and running 'make check' again, and checking that both 'make check' yield identical results. This was done on x86_64-linux-gnu and i686-linux-gnu. * bits/timesize.h: New file. * stdlib/Makefile (headers): Add bits/timesize.h. * sysdeps/unix/sysv/linux/bits/msq-pad.h (__MSQ_PAD_AFTER_TIME): Use __TIMESIZE instead of __WORDSIZE. * sysdeps/unix/sysv/linux/bits/sem-pad.h (__SEM_PAD_AFTER_TIME): Likewise. * sysdeps/unix/sysv/linux/bits/shm-pad.h (__SHM_PAD_AFTER_TIME): Likewise. * sysdeps/unix/sysv/linux/hppa/bits/msq-pad.h (__MSQ_PAD_BEFORE_TIME): Likewise. * sysdeps/unix/sysv/linux/hppa/bits/sem-pad.h (__SEM_PAD_BEFORE_TIME): Likewise. * sysdeps/unix/sysv/linux/hppa/bits/shm-pad.h (__SHM_PAD_BEFORE_TIME, __SHM_PAD_BETWEEN_TIME_AND_SEGSZ): Likewise. * sysdeps/unix/sysv/linux/mips/bits/msq-pad.h (__MSQ_PAD_AFTER_TIME, __MSQ_PAD_BEFORE_TIME): Likewise. * sysdeps/unix/sysv/linux/powerpc/bits/msq-pad.h (__MSQ_PAD_BEFORE_TIME): Likewise. * sysdeps/unix/sysv/linux/powerpc/bits/sem-pad.h (__SEM_PAD_BEFORE_TIME): Likewise. * sysdeps/unix/sysv/linux/powerpc/bits/shm-pad.h (__SHM_PAD_BEFORE_TIME, __SHM_PAD_BETWEEN_TIME_AND_SEGSZ): Likewise. * sysdeps/unix/sysv/linux/sparc/bits/msq-pad.h (__MSQ_PAD_BEFORE_TIME): Likewise. * sysdeps/unix/sysv/linux/sparc/bits/sem-pad.h (__SEM_PAD_BEFORE_TIME): Likewise. * sysdeps/unix/sysv/linux/sparc/bits/shm-pad.h (__SHM_PAD_BEFORE_TIME): Likewise. * sysdeps/unix/sysv/linux/x86/bits/msq-pad.h: Delete file. * sysdeps/unix/sysv/linux/x86/bits/shm-pad.h: Likewise. * sysdeps/unix/sysv/linux/x86/bits/timesize.h: New file.
2018-10-24 09:34:26 +00:00
/* Bit size of the time_t type at glibc build time, general case.
Copyright (C) 2018-2019 Free Software Foundation, Inc.
Use single bits/msq.h for all architectures. The bits/msq.h headers for architectures using the Linux kernel vary in a few ways: * x32 uses __syscall_ulong_t instead of unsigned long int. * x32 has 64-bit time_t, so no padding around time fields despite __WORDSIZE == 32. * Some older 32-bit big-endian architectures have padding before rather than after time fields, although the preferred generic approach is padding after the time fields independent of endianness. (There are also insubstantial differences such as use of unsigned int for padding instead of unsigned long int, which makes no difference to layout since the padding fields using unsigned int are only present on 32-bit architectures.) For the first, __syscall_ulong_t can be used in the generic version as it's the same as unsigned long int everywhere except x32. For the other two differences, this patch adds macros __MSQ_PAD_BEFORE_TIME and __MSQ_PAD_AFTER_TIME in a new bits/msq-pad.h header, so that header is the only one needing to be provided on architectures with differences in this area, and everything else can go in a single common bits/msq.h header. Once we have __TIMESIZE, the generic bits/msq-pad.h can change to use that instead of __WORDSIZE, at which point the x86 version of bits/msq-pad.h won't be needed either. Tested for x86_64 and x86, and with build-many-glibcs.py. * sysdeps/unix/sysv/linux/Makefile (sysdep_headers): Add bits/msq-pad.h. * sysdeps/unix/sysv/linux/bits/msq.h: Include <bits/msq-pad.h> instead of <bits/wordsize.h>. (msgqnum_t): Define as __syscall_ulong_t. (msglen_t): Likewise. (__MSQ_PAD_TIME): New macro, depending on [__MSQ_PAD_BEFORE_TIME] and [__MSQ_PAD_AFTER_TIME]. (struct msqid_ds): Define time fields using __MSQ_PAD_TIME. Use __syscall_ulong_t instead of unsigned long int. * sysdeps/unix/sysv/linux/bits/msq-pad.h: New file. * sysdeps/unix/sysv/linux/hppa/bits/msq-pad.h: Likewise. * sysdeps/unix/sysv/linux/mips/bits/msq-pad.h: Likewise. * sysdeps/unix/sysv/linux/powerpc/bits/msq-pad.h: Likewise. * sysdeps/unix/sysv/linux/sparc/bits/msq-pad.h: Likewise. * sysdeps/unix/sysv/linux/x86/bits/msq-pad.h: Likewise. * sysdeps/unix/sysv/linux/hppa/bits/msq.h: Remove. * sysdeps/unix/sysv/linux/mips/bits/msq.h: Likewise. * sysdeps/unix/sysv/linux/powerpc/bits/msq.h: Likewise. * sysdeps/unix/sysv/linux/sparc/bits/msq.h: Likewise. * sysdeps/unix/sysv/linux/x86/bits/msq.h: Likewise.
2018-10-11 12:07:27 +00:00
This file is part of the GNU C Library.
The GNU C Library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version.
The GNU C Library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public
License along with the GNU C Library; if not, see
<http://www.gnu.org/licenses/>. */
Y2038: provide size of default time_t for target architecture To determine whether the default time_t interfaces are 32-bit and so need conversions, or are 64-bit and so are compatible with the internal 64-bit type without conversions, a macro giving the size of the default time_t is also required. This macro is called __TIMESIZE. This macro can then be used instead of __WORDSIZE in msq-pad.h and shm-pad.h files, which in turn allows removing their x86 variants, and in sem-pad.h files but keeping the x86 variant. This patch was tested by running 'make check' on branch master then applying this patch and running 'make check' again, and checking that both 'make check' yield identical results. This was done on x86_64-linux-gnu and i686-linux-gnu. * bits/timesize.h: New file. * stdlib/Makefile (headers): Add bits/timesize.h. * sysdeps/unix/sysv/linux/bits/msq-pad.h (__MSQ_PAD_AFTER_TIME): Use __TIMESIZE instead of __WORDSIZE. * sysdeps/unix/sysv/linux/bits/sem-pad.h (__SEM_PAD_AFTER_TIME): Likewise. * sysdeps/unix/sysv/linux/bits/shm-pad.h (__SHM_PAD_AFTER_TIME): Likewise. * sysdeps/unix/sysv/linux/hppa/bits/msq-pad.h (__MSQ_PAD_BEFORE_TIME): Likewise. * sysdeps/unix/sysv/linux/hppa/bits/sem-pad.h (__SEM_PAD_BEFORE_TIME): Likewise. * sysdeps/unix/sysv/linux/hppa/bits/shm-pad.h (__SHM_PAD_BEFORE_TIME, __SHM_PAD_BETWEEN_TIME_AND_SEGSZ): Likewise. * sysdeps/unix/sysv/linux/mips/bits/msq-pad.h (__MSQ_PAD_AFTER_TIME, __MSQ_PAD_BEFORE_TIME): Likewise. * sysdeps/unix/sysv/linux/powerpc/bits/msq-pad.h (__MSQ_PAD_BEFORE_TIME): Likewise. * sysdeps/unix/sysv/linux/powerpc/bits/sem-pad.h (__SEM_PAD_BEFORE_TIME): Likewise. * sysdeps/unix/sysv/linux/powerpc/bits/shm-pad.h (__SHM_PAD_BEFORE_TIME, __SHM_PAD_BETWEEN_TIME_AND_SEGSZ): Likewise. * sysdeps/unix/sysv/linux/sparc/bits/msq-pad.h (__MSQ_PAD_BEFORE_TIME): Likewise. * sysdeps/unix/sysv/linux/sparc/bits/sem-pad.h (__SEM_PAD_BEFORE_TIME): Likewise. * sysdeps/unix/sysv/linux/sparc/bits/shm-pad.h (__SHM_PAD_BEFORE_TIME): Likewise. * sysdeps/unix/sysv/linux/x86/bits/msq-pad.h: Delete file. * sysdeps/unix/sysv/linux/x86/bits/shm-pad.h: Likewise. * sysdeps/unix/sysv/linux/x86/bits/timesize.h: New file.
2018-10-24 09:34:26 +00:00
#include <bits/wordsize.h>
Use single bits/msq.h for all architectures. The bits/msq.h headers for architectures using the Linux kernel vary in a few ways: * x32 uses __syscall_ulong_t instead of unsigned long int. * x32 has 64-bit time_t, so no padding around time fields despite __WORDSIZE == 32. * Some older 32-bit big-endian architectures have padding before rather than after time fields, although the preferred generic approach is padding after the time fields independent of endianness. (There are also insubstantial differences such as use of unsigned int for padding instead of unsigned long int, which makes no difference to layout since the padding fields using unsigned int are only present on 32-bit architectures.) For the first, __syscall_ulong_t can be used in the generic version as it's the same as unsigned long int everywhere except x32. For the other two differences, this patch adds macros __MSQ_PAD_BEFORE_TIME and __MSQ_PAD_AFTER_TIME in a new bits/msq-pad.h header, so that header is the only one needing to be provided on architectures with differences in this area, and everything else can go in a single common bits/msq.h header. Once we have __TIMESIZE, the generic bits/msq-pad.h can change to use that instead of __WORDSIZE, at which point the x86 version of bits/msq-pad.h won't be needed either. Tested for x86_64 and x86, and with build-many-glibcs.py. * sysdeps/unix/sysv/linux/Makefile (sysdep_headers): Add bits/msq-pad.h. * sysdeps/unix/sysv/linux/bits/msq.h: Include <bits/msq-pad.h> instead of <bits/wordsize.h>. (msgqnum_t): Define as __syscall_ulong_t. (msglen_t): Likewise. (__MSQ_PAD_TIME): New macro, depending on [__MSQ_PAD_BEFORE_TIME] and [__MSQ_PAD_AFTER_TIME]. (struct msqid_ds): Define time fields using __MSQ_PAD_TIME. Use __syscall_ulong_t instead of unsigned long int. * sysdeps/unix/sysv/linux/bits/msq-pad.h: New file. * sysdeps/unix/sysv/linux/hppa/bits/msq-pad.h: Likewise. * sysdeps/unix/sysv/linux/mips/bits/msq-pad.h: Likewise. * sysdeps/unix/sysv/linux/powerpc/bits/msq-pad.h: Likewise. * sysdeps/unix/sysv/linux/sparc/bits/msq-pad.h: Likewise. * sysdeps/unix/sysv/linux/x86/bits/msq-pad.h: Likewise. * sysdeps/unix/sysv/linux/hppa/bits/msq.h: Remove. * sysdeps/unix/sysv/linux/mips/bits/msq.h: Likewise. * sysdeps/unix/sysv/linux/powerpc/bits/msq.h: Likewise. * sysdeps/unix/sysv/linux/sparc/bits/msq.h: Likewise. * sysdeps/unix/sysv/linux/x86/bits/msq.h: Likewise.
2018-10-11 12:07:27 +00:00
Y2038: provide size of default time_t for target architecture To determine whether the default time_t interfaces are 32-bit and so need conversions, or are 64-bit and so are compatible with the internal 64-bit type without conversions, a macro giving the size of the default time_t is also required. This macro is called __TIMESIZE. This macro can then be used instead of __WORDSIZE in msq-pad.h and shm-pad.h files, which in turn allows removing their x86 variants, and in sem-pad.h files but keeping the x86 variant. This patch was tested by running 'make check' on branch master then applying this patch and running 'make check' again, and checking that both 'make check' yield identical results. This was done on x86_64-linux-gnu and i686-linux-gnu. * bits/timesize.h: New file. * stdlib/Makefile (headers): Add bits/timesize.h. * sysdeps/unix/sysv/linux/bits/msq-pad.h (__MSQ_PAD_AFTER_TIME): Use __TIMESIZE instead of __WORDSIZE. * sysdeps/unix/sysv/linux/bits/sem-pad.h (__SEM_PAD_AFTER_TIME): Likewise. * sysdeps/unix/sysv/linux/bits/shm-pad.h (__SHM_PAD_AFTER_TIME): Likewise. * sysdeps/unix/sysv/linux/hppa/bits/msq-pad.h (__MSQ_PAD_BEFORE_TIME): Likewise. * sysdeps/unix/sysv/linux/hppa/bits/sem-pad.h (__SEM_PAD_BEFORE_TIME): Likewise. * sysdeps/unix/sysv/linux/hppa/bits/shm-pad.h (__SHM_PAD_BEFORE_TIME, __SHM_PAD_BETWEEN_TIME_AND_SEGSZ): Likewise. * sysdeps/unix/sysv/linux/mips/bits/msq-pad.h (__MSQ_PAD_AFTER_TIME, __MSQ_PAD_BEFORE_TIME): Likewise. * sysdeps/unix/sysv/linux/powerpc/bits/msq-pad.h (__MSQ_PAD_BEFORE_TIME): Likewise. * sysdeps/unix/sysv/linux/powerpc/bits/sem-pad.h (__SEM_PAD_BEFORE_TIME): Likewise. * sysdeps/unix/sysv/linux/powerpc/bits/shm-pad.h (__SHM_PAD_BEFORE_TIME, __SHM_PAD_BETWEEN_TIME_AND_SEGSZ): Likewise. * sysdeps/unix/sysv/linux/sparc/bits/msq-pad.h (__MSQ_PAD_BEFORE_TIME): Likewise. * sysdeps/unix/sysv/linux/sparc/bits/sem-pad.h (__SEM_PAD_BEFORE_TIME): Likewise. * sysdeps/unix/sysv/linux/sparc/bits/shm-pad.h (__SHM_PAD_BEFORE_TIME): Likewise. * sysdeps/unix/sysv/linux/x86/bits/msq-pad.h: Delete file. * sysdeps/unix/sysv/linux/x86/bits/shm-pad.h: Likewise. * sysdeps/unix/sysv/linux/x86/bits/timesize.h: New file.
2018-10-24 09:34:26 +00:00
/* Size in bits of the 'time_t' type of the default ABI. */
#define __TIMESIZE __WORDSIZE