AuroraMiddleware/glibc
1
0
Fork 0
mirror of https://sourceware.org/git/glibc.git synced 2024-12-12 06:10:10 +00:00
Code Issues Packages Projects Releases Wiki Activity
ee10f5dfd8
glibc/sysdeps/unix/sysv/linux/x86/elision-lock.c

103 lines
3.3 KiB
C
Raw Normal View History

Add the low level infrastructure for pthreads lock elision with TSX Lock elision using TSX is a technique to optimize lock scaling It allows to run locks in parallel using hardware support for a transactional execution mode in 4th generation Intel Core CPUs. See http://www.intel.com/software/tsx for more Information. This patch implements a simple adaptive lock elision algorithm based on RTM. It enables elision for the pthread mutexes and rwlocks. The algorithm keeps track whether a mutex successfully elides or not, and stops eliding for some time when it is not. When the CPU supports RTM the elision path is automatically tried, otherwise any elision is disabled. The adaptation algorithm and its tuning is currently preliminary. The code adds some checks to the lock fast paths. Micro-benchmarks show little to no difference without RTM. This patch implements the low level "lll_" code for lock elision. Followon patches hook this into the pthread implementation Changes with the RTM mutexes: ----------------------------- Lock elision in pthreads is generally compatible with existing programs. There are some obscure exceptions, which are expected to be uncommon. See the manual for more details. - A broken program that unlocks a free lock will crash. There are ways around this with some tradeoffs (more code in hot paths) I'm still undecided on what approach to take here; have to wait for testing reports. - pthread_mutex_destroy of a lock mutex will not return EBUSY but 0. - There's also a similar situation with trylock outside the mutex, "knowing" that the mutex must be held due to some other condition. In this case an assert failure cannot be recovered. This situation is usually an existing bug in the program. - Same applies to the rwlocks. Some of the return values changes (for example there is no EDEADLK for an elided lock, unless it aborts. However when elided it will also never deadlock of course) - Timing changes, so broken programs that make assumptions about specific timing may expose already existing latent problems. Note that these broken programs will break in other situations too (loaded system, new faster hardware, compiler optimizations etc.) - Programs with non recursive mutexes that take them recursively in a thread and which would always deadlock without elision may not always see a deadlock. The deadlock will only happen on an early or delayed abort (which typically happens at some point) This only happens for mutexes not explicitely set to PTHREAD_MUTEX_NORMAL or PTHREAD_MUTEX_ADAPTIVE_NP. PTHREAD_MUTEX_NORMAL mutexes do not elide. The elision default can be set at configure time. This patch implements the basic infrastructure for elision.
2012-11-10 08:51:26 +00:00
/* elision-lock.c: Elided pthread mutex lock.
Update copyright dates with scripts/update-copyrights
2023-01-06 21:08:04 +00:00
Copyright (C) 2011-2023 Free Software Foundation, Inc.
Add the low level infrastructure for pthreads lock elision with TSX Lock elision using TSX is a technique to optimize lock scaling It allows to run locks in parallel using hardware support for a transactional execution mode in 4th generation Intel Core CPUs. See http://www.intel.com/software/tsx for more Information. This patch implements a simple adaptive lock elision algorithm based on RTM. It enables elision for the pthread mutexes and rwlocks. The algorithm keeps track whether a mutex successfully elides or not, and stops eliding for some time when it is not. When the CPU supports RTM the elision path is automatically tried, otherwise any elision is disabled. The adaptation algorithm and its tuning is currently preliminary. The code adds some checks to the lock fast paths. Micro-benchmarks show little to no difference without RTM. This patch implements the low level "lll_" code for lock elision. Followon patches hook this into the pthread implementation Changes with the RTM mutexes: ----------------------------- Lock elision in pthreads is generally compatible with existing programs. There are some obscure exceptions, which are expected to be uncommon. See the manual for more details. - A broken program that unlocks a free lock will crash. There are ways around this with some tradeoffs (more code in hot paths) I'm still undecided on what approach to take here; have to wait for testing reports. - pthread_mutex_destroy of a lock mutex will not return EBUSY but 0. - There's also a similar situation with trylock outside the mutex, "knowing" that the mutex must be held due to some other condition. In this case an assert failure cannot be recovered. This situation is usually an existing bug in the program. - Same applies to the rwlocks. Some of the return values changes (for example there is no EDEADLK for an elided lock, unless it aborts. However when elided it will also never deadlock of course) - Timing changes, so broken programs that make assumptions about specific timing may expose already existing latent problems. Note that these broken programs will break in other situations too (loaded system, new faster hardware, compiler optimizations etc.) - Programs with non recursive mutexes that take them recursively in a thread and which would always deadlock without elision may not always see a deadlock. The deadlock will only happen on an early or delayed abort (which typically happens at some point) This only happens for mutexes not explicitely set to PTHREAD_MUTEX_NORMAL or PTHREAD_MUTEX_ADAPTIVE_NP. PTHREAD_MUTEX_NORMAL mutexes do not elide. The elision default can be set at configure time. This patch implements the basic infrastructure for elision.
2012-11-10 08:51:26 +00:00
This file is part of the GNU C Library.
The GNU C Library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version.
The GNU C Library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public
License along with the GNU C Library; if not, see
Prefer https to http for gnu.org and fsf.org URLs Also, change sources.redhat.com to sourceware.org. This patch was automatically generated by running the following shell script, which uses GNU sed, and which avoids modifying files imported from upstream: sed -ri ' s,(http|ftp)(://(.*\.)?(gnu|fsf|sourceware)\.org($|[^.]|\.[^a-z])),https\2,g s,(http|ftp)(://(.*\.)?)sources\.redhat\.com($|[^.]|\.[^a-z]),https\2sourceware.org\4,g ' \ $(find $(git ls-files) -prune -type f \ ! -name '*.po' \ ! -name 'ChangeLog*' \ ! -path COPYING ! -path COPYING.LIB \ ! -path manual/fdl-1.3.texi ! -path manual/lgpl-2.1.texi \ ! -path manual/texinfo.tex ! -path scripts/config.guess \ ! -path scripts/config.sub ! -path scripts/install-sh \ ! -path scripts/mkinstalldirs ! -path scripts/move-if-change \ ! -path INSTALL ! -path locale/programs/charmap-kw.h \ ! -path po/libc.pot ! -path sysdeps/gnu/errlist.c \ ! '(' -name configure \ -execdir test -f configure.ac -o -f configure.in ';' ')' \ ! '(' -name preconfigure \ -execdir test -f preconfigure.ac ';' ')' \ -print) and then by running 'make dist-prepare' to regenerate files built from the altered files, and then executing the following to cleanup: chmod a+x sysdeps/unix/sysv/linux/riscv/configure # Omit irrelevant whitespace and comment-only changes, # perhaps from a slightly-different Autoconf version. git checkout -f \ sysdeps/csky/configure \ sysdeps/hppa/configure \ sysdeps/riscv/configure \ sysdeps/unix/sysv/linux/csky/configure # Omit changes that caused a pre-commit check to fail like this: # remote: *** error: sysdeps/powerpc/powerpc64/ppc-mcount.S: trailing lines git checkout -f \ sysdeps/powerpc/powerpc64/ppc-mcount.S \ sysdeps/unix/sysv/linux/s390/s390-64/syscall.S # Omit change that caused a pre-commit check to fail like this: # remote: *** error: sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S: last line does not end in newline git checkout -f sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S
2019-09-07 05:40:42 +00:00
<https://www.gnu.org/licenses/>. */
Add the low level infrastructure for pthreads lock elision with TSX Lock elision using TSX is a technique to optimize lock scaling It allows to run locks in parallel using hardware support for a transactional execution mode in 4th generation Intel Core CPUs. See http://www.intel.com/software/tsx for more Information. This patch implements a simple adaptive lock elision algorithm based on RTM. It enables elision for the pthread mutexes and rwlocks. The algorithm keeps track whether a mutex successfully elides or not, and stops eliding for some time when it is not. When the CPU supports RTM the elision path is automatically tried, otherwise any elision is disabled. The adaptation algorithm and its tuning is currently preliminary. The code adds some checks to the lock fast paths. Micro-benchmarks show little to no difference without RTM. This patch implements the low level "lll_" code for lock elision. Followon patches hook this into the pthread implementation Changes with the RTM mutexes: ----------------------------- Lock elision in pthreads is generally compatible with existing programs. There are some obscure exceptions, which are expected to be uncommon. See the manual for more details. - A broken program that unlocks a free lock will crash. There are ways around this with some tradeoffs (more code in hot paths) I'm still undecided on what approach to take here; have to wait for testing reports. - pthread_mutex_destroy of a lock mutex will not return EBUSY but 0. - There's also a similar situation with trylock outside the mutex, "knowing" that the mutex must be held due to some other condition. In this case an assert failure cannot be recovered. This situation is usually an existing bug in the program. - Same applies to the rwlocks. Some of the return values changes (for example there is no EDEADLK for an elided lock, unless it aborts. However when elided it will also never deadlock of course) - Timing changes, so broken programs that make assumptions about specific timing may expose already existing latent problems. Note that these broken programs will break in other situations too (loaded system, new faster hardware, compiler optimizations etc.) - Programs with non recursive mutexes that take them recursively in a thread and which would always deadlock without elision may not always see a deadlock. The deadlock will only happen on an early or delayed abort (which typically happens at some point) This only happens for mutexes not explicitely set to PTHREAD_MUTEX_NORMAL or PTHREAD_MUTEX_ADAPTIVE_NP. PTHREAD_MUTEX_NORMAL mutexes do not elide. The elision default can be set at configure time. This patch implements the basic infrastructure for elision.
2012-11-10 08:51:26 +00:00
#include <pthread.h>
#include "pthreadP.h"
#include "lowlevellock.h"
#include "hle.h"
#include <elision-conf.h>
#ifndef EXTRAARG
#define EXTRAARG
#endif
#ifndef LLL_LOCK
#define LLL_LOCK(a,b) lll_lock(a,b), 0
#endif
#define aconf __elision_aconf
/* Adaptive lock using transactions.
By default the lock region is run as a transaction, and when it
aborts or the lock is busy the lock adapts itself. */
int
__lll_lock_elision (int *futex, short *adapt_count, EXTRAARG int private)
{
Use C11-like atomics instead of plain memory accesses in x86 lock elision. This uses atomic operations to access lock elision metadata that is accessed concurrently (ie, adapt_count fields). The size of the data is less than a word but accessed only with atomic loads and stores; therefore, we add support for shorter-size atomic load and stores too. * include/atomic.h (__atomic_check_size_ls): New. (atomic_load_relaxed, atomic_load_acquire, atomic_store_relaxed, atomic_store_release): Use it. * sysdeps/x86/elide.h (ACCESS_ONCE): Remove. (elision_adapt, ELIDE_LOCK): Use atomics. * sysdeps/unix/sysv/linux/x86/elision-lock.c (__lll_lock_elision): Use atomics and improve code comments. * sysdeps/unix/sysv/linux/x86/elision-trylock.c (__lll_trylock_elision): Likewise.
2016-11-30 16:53:11 +00:00
/* adapt_count can be accessed concurrently; these accesses can be both
inside of transactions (if critical sections are nested and the outer
critical section uses lock elision) and outside of transactions. Thus,
we need to use atomic accesses to avoid data races. However, the
value of adapt_count is just a hint, so relaxed MO accesses are
sufficient. */
if (atomic_load_relaxed (adapt_count) <= 0)
Add the low level infrastructure for pthreads lock elision with TSX Lock elision using TSX is a technique to optimize lock scaling It allows to run locks in parallel using hardware support for a transactional execution mode in 4th generation Intel Core CPUs. See http://www.intel.com/software/tsx for more Information. This patch implements a simple adaptive lock elision algorithm based on RTM. It enables elision for the pthread mutexes and rwlocks. The algorithm keeps track whether a mutex successfully elides or not, and stops eliding for some time when it is not. When the CPU supports RTM the elision path is automatically tried, otherwise any elision is disabled. The adaptation algorithm and its tuning is currently preliminary. The code adds some checks to the lock fast paths. Micro-benchmarks show little to no difference without RTM. This patch implements the low level "lll_" code for lock elision. Followon patches hook this into the pthread implementation Changes with the RTM mutexes: ----------------------------- Lock elision in pthreads is generally compatible with existing programs. There are some obscure exceptions, which are expected to be uncommon. See the manual for more details. - A broken program that unlocks a free lock will crash. There are ways around this with some tradeoffs (more code in hot paths) I'm still undecided on what approach to take here; have to wait for testing reports. - pthread_mutex_destroy of a lock mutex will not return EBUSY but 0. - There's also a similar situation with trylock outside the mutex, "knowing" that the mutex must be held due to some other condition. In this case an assert failure cannot be recovered. This situation is usually an existing bug in the program. - Same applies to the rwlocks. Some of the return values changes (for example there is no EDEADLK for an elided lock, unless it aborts. However when elided it will also never deadlock of course) - Timing changes, so broken programs that make assumptions about specific timing may expose already existing latent problems. Note that these broken programs will break in other situations too (loaded system, new faster hardware, compiler optimizations etc.) - Programs with non recursive mutexes that take them recursively in a thread and which would always deadlock without elision may not always see a deadlock. The deadlock will only happen on an early or delayed abort (which typically happens at some point) This only happens for mutexes not explicitely set to PTHREAD_MUTEX_NORMAL or PTHREAD_MUTEX_ADAPTIVE_NP. PTHREAD_MUTEX_NORMAL mutexes do not elide. The elision default can be set at configure time. This patch implements the basic infrastructure for elision.
2012-11-10 08:51:26 +00:00
{
unsigned status;
int try_xbegin;
for (try_xbegin = aconf.retry_try_xbegin;
try_xbegin > 0;
try_xbegin--)
{
if ((status = _xbegin()) == _XBEGIN_STARTED)
{
if (*futex == 0)
return 0;
Clean up whitespace in lock elision patches. Signed-off-by: Carlos O'Donell <carlos@redhat.com>
2013-07-19 05:16:28 +00:00
/* Lock was busy. Fall back to normal locking.
Add the low level infrastructure for pthreads lock elision with TSX Lock elision using TSX is a technique to optimize lock scaling It allows to run locks in parallel using hardware support for a transactional execution mode in 4th generation Intel Core CPUs. See http://www.intel.com/software/tsx for more Information. This patch implements a simple adaptive lock elision algorithm based on RTM. It enables elision for the pthread mutexes and rwlocks. The algorithm keeps track whether a mutex successfully elides or not, and stops eliding for some time when it is not. When the CPU supports RTM the elision path is automatically tried, otherwise any elision is disabled. The adaptation algorithm and its tuning is currently preliminary. The code adds some checks to the lock fast paths. Micro-benchmarks show little to no difference without RTM. This patch implements the low level "lll_" code for lock elision. Followon patches hook this into the pthread implementation Changes with the RTM mutexes: ----------------------------- Lock elision in pthreads is generally compatible with existing programs. There are some obscure exceptions, which are expected to be uncommon. See the manual for more details. - A broken program that unlocks a free lock will crash. There are ways around this with some tradeoffs (more code in hot paths) I'm still undecided on what approach to take here; have to wait for testing reports. - pthread_mutex_destroy of a lock mutex will not return EBUSY but 0. - There's also a similar situation with trylock outside the mutex, "knowing" that the mutex must be held due to some other condition. In this case an assert failure cannot be recovered. This situation is usually an existing bug in the program. - Same applies to the rwlocks. Some of the return values changes (for example there is no EDEADLK for an elided lock, unless it aborts. However when elided it will also never deadlock of course) - Timing changes, so broken programs that make assumptions about specific timing may expose already existing latent problems. Note that these broken programs will break in other situations too (loaded system, new faster hardware, compiler optimizations etc.) - Programs with non recursive mutexes that take them recursively in a thread and which would always deadlock without elision may not always see a deadlock. The deadlock will only happen on an early or delayed abort (which typically happens at some point) This only happens for mutexes not explicitely set to PTHREAD_MUTEX_NORMAL or PTHREAD_MUTEX_ADAPTIVE_NP. PTHREAD_MUTEX_NORMAL mutexes do not elide. The elision default can be set at configure time. This patch implements the basic infrastructure for elision.
2012-11-10 08:51:26 +00:00
Could also _xend here but xabort with 0xff code
is more visible in the profiler. */
_xabort (_ABORT_LOCK_BUSY);
}
if (!(status & _XABORT_RETRY))
{
if ((status & _XABORT_EXPLICIT)
&& _XABORT_CODE (status) == _ABORT_LOCK_BUSY)
{
Clean up whitespace in lock elision patches. Signed-off-by: Carlos O'Donell <carlos@redhat.com>
2013-07-19 05:16:28 +00:00
/* Right now we skip here. Better would be to wait a bit
Use C11-like atomics instead of plain memory accesses in x86 lock elision. This uses atomic operations to access lock elision metadata that is accessed concurrently (ie, adapt_count fields). The size of the data is less than a word but accessed only with atomic loads and stores; therefore, we add support for shorter-size atomic load and stores too. * include/atomic.h (__atomic_check_size_ls): New. (atomic_load_relaxed, atomic_load_acquire, atomic_store_relaxed, atomic_store_release): Use it. * sysdeps/x86/elide.h (ACCESS_ONCE): Remove. (elision_adapt, ELIDE_LOCK): Use atomics. * sysdeps/unix/sysv/linux/x86/elision-lock.c (__lll_lock_elision): Use atomics and improve code comments. * sysdeps/unix/sysv/linux/x86/elision-trylock.c (__lll_trylock_elision): Likewise.
2016-11-30 16:53:11 +00:00
and retry. This likely needs some spinning. See
above for why relaxed MO is sufficient. */
if (atomic_load_relaxed (adapt_count)
!= aconf.skip_lock_busy)
atomic_store_relaxed (adapt_count, aconf.skip_lock_busy);
Add the low level infrastructure for pthreads lock elision with TSX Lock elision using TSX is a technique to optimize lock scaling It allows to run locks in parallel using hardware support for a transactional execution mode in 4th generation Intel Core CPUs. See http://www.intel.com/software/tsx for more Information. This patch implements a simple adaptive lock elision algorithm based on RTM. It enables elision for the pthread mutexes and rwlocks. The algorithm keeps track whether a mutex successfully elides or not, and stops eliding for some time when it is not. When the CPU supports RTM the elision path is automatically tried, otherwise any elision is disabled. The adaptation algorithm and its tuning is currently preliminary. The code adds some checks to the lock fast paths. Micro-benchmarks show little to no difference without RTM. This patch implements the low level "lll_" code for lock elision. Followon patches hook this into the pthread implementation Changes with the RTM mutexes: ----------------------------- Lock elision in pthreads is generally compatible with existing programs. There are some obscure exceptions, which are expected to be uncommon. See the manual for more details. - A broken program that unlocks a free lock will crash. There are ways around this with some tradeoffs (more code in hot paths) I'm still undecided on what approach to take here; have to wait for testing reports. - pthread_mutex_destroy of a lock mutex will not return EBUSY but 0. - There's also a similar situation with trylock outside the mutex, "knowing" that the mutex must be held due to some other condition. In this case an assert failure cannot be recovered. This situation is usually an existing bug in the program. - Same applies to the rwlocks. Some of the return values changes (for example there is no EDEADLK for an elided lock, unless it aborts. However when elided it will also never deadlock of course) - Timing changes, so broken programs that make assumptions about specific timing may expose already existing latent problems. Note that these broken programs will break in other situations too (loaded system, new faster hardware, compiler optimizations etc.) - Programs with non recursive mutexes that take them recursively in a thread and which would always deadlock without elision may not always see a deadlock. The deadlock will only happen on an early or delayed abort (which typically happens at some point) This only happens for mutexes not explicitely set to PTHREAD_MUTEX_NORMAL or PTHREAD_MUTEX_ADAPTIVE_NP. PTHREAD_MUTEX_NORMAL mutexes do not elide. The elision default can be set at configure time. This patch implements the basic infrastructure for elision.
2012-11-10 08:51:26 +00:00
}
Clean up whitespace in lock elision patches. Signed-off-by: Carlos O'Donell <carlos@redhat.com>
2013-07-19 05:16:28 +00:00
/* Internal abort. There is no chance for retry.
Add the low level infrastructure for pthreads lock elision with TSX Lock elision using TSX is a technique to optimize lock scaling It allows to run locks in parallel using hardware support for a transactional execution mode in 4th generation Intel Core CPUs. See http://www.intel.com/software/tsx for more Information. This patch implements a simple adaptive lock elision algorithm based on RTM. It enables elision for the pthread mutexes and rwlocks. The algorithm keeps track whether a mutex successfully elides or not, and stops eliding for some time when it is not. When the CPU supports RTM the elision path is automatically tried, otherwise any elision is disabled. The adaptation algorithm and its tuning is currently preliminary. The code adds some checks to the lock fast paths. Micro-benchmarks show little to no difference without RTM. This patch implements the low level "lll_" code for lock elision. Followon patches hook this into the pthread implementation Changes with the RTM mutexes: ----------------------------- Lock elision in pthreads is generally compatible with existing programs. There are some obscure exceptions, which are expected to be uncommon. See the manual for more details. - A broken program that unlocks a free lock will crash. There are ways around this with some tradeoffs (more code in hot paths) I'm still undecided on what approach to take here; have to wait for testing reports. - pthread_mutex_destroy of a lock mutex will not return EBUSY but 0. - There's also a similar situation with trylock outside the mutex, "knowing" that the mutex must be held due to some other condition. In this case an assert failure cannot be recovered. This situation is usually an existing bug in the program. - Same applies to the rwlocks. Some of the return values changes (for example there is no EDEADLK for an elided lock, unless it aborts. However when elided it will also never deadlock of course) - Timing changes, so broken programs that make assumptions about specific timing may expose already existing latent problems. Note that these broken programs will break in other situations too (loaded system, new faster hardware, compiler optimizations etc.) - Programs with non recursive mutexes that take them recursively in a thread and which would always deadlock without elision may not always see a deadlock. The deadlock will only happen on an early or delayed abort (which typically happens at some point) This only happens for mutexes not explicitely set to PTHREAD_MUTEX_NORMAL or PTHREAD_MUTEX_ADAPTIVE_NP. PTHREAD_MUTEX_NORMAL mutexes do not elide. The elision default can be set at configure time. This patch implements the basic infrastructure for elision.
2012-11-10 08:51:26 +00:00
Use the normal locking and next time use lock.
Use C11-like atomics instead of plain memory accesses in x86 lock elision. This uses atomic operations to access lock elision metadata that is accessed concurrently (ie, adapt_count fields). The size of the data is less than a word but accessed only with atomic loads and stores; therefore, we add support for shorter-size atomic load and stores too. * include/atomic.h (__atomic_check_size_ls): New. (atomic_load_relaxed, atomic_load_acquire, atomic_store_relaxed, atomic_store_release): Use it. * sysdeps/x86/elide.h (ACCESS_ONCE): Remove. (elision_adapt, ELIDE_LOCK): Use atomics. * sysdeps/unix/sysv/linux/x86/elision-lock.c (__lll_lock_elision): Use atomics and improve code comments. * sysdeps/unix/sysv/linux/x86/elision-trylock.c (__lll_trylock_elision): Likewise.
2016-11-30 16:53:11 +00:00
Be careful to avoid writing to the lock. See above for why
relaxed MO is sufficient. */
else if (atomic_load_relaxed (adapt_count)
!= aconf.skip_lock_internal_abort)
atomic_store_relaxed (adapt_count,
aconf.skip_lock_internal_abort);
Add the low level infrastructure for pthreads lock elision with TSX Lock elision using TSX is a technique to optimize lock scaling It allows to run locks in parallel using hardware support for a transactional execution mode in 4th generation Intel Core CPUs. See http://www.intel.com/software/tsx for more Information. This patch implements a simple adaptive lock elision algorithm based on RTM. It enables elision for the pthread mutexes and rwlocks. The algorithm keeps track whether a mutex successfully elides or not, and stops eliding for some time when it is not. When the CPU supports RTM the elision path is automatically tried, otherwise any elision is disabled. The adaptation algorithm and its tuning is currently preliminary. The code adds some checks to the lock fast paths. Micro-benchmarks show little to no difference without RTM. This patch implements the low level "lll_" code for lock elision. Followon patches hook this into the pthread implementation Changes with the RTM mutexes: ----------------------------- Lock elision in pthreads is generally compatible with existing programs. There are some obscure exceptions, which are expected to be uncommon. See the manual for more details. - A broken program that unlocks a free lock will crash. There are ways around this with some tradeoffs (more code in hot paths) I'm still undecided on what approach to take here; have to wait for testing reports. - pthread_mutex_destroy of a lock mutex will not return EBUSY but 0. - There's also a similar situation with trylock outside the mutex, "knowing" that the mutex must be held due to some other condition. In this case an assert failure cannot be recovered. This situation is usually an existing bug in the program. - Same applies to the rwlocks. Some of the return values changes (for example there is no EDEADLK for an elided lock, unless it aborts. However when elided it will also never deadlock of course) - Timing changes, so broken programs that make assumptions about specific timing may expose already existing latent problems. Note that these broken programs will break in other situations too (loaded system, new faster hardware, compiler optimizations etc.) - Programs with non recursive mutexes that take them recursively in a thread and which would always deadlock without elision may not always see a deadlock. The deadlock will only happen on an early or delayed abort (which typically happens at some point) This only happens for mutexes not explicitely set to PTHREAD_MUTEX_NORMAL or PTHREAD_MUTEX_ADAPTIVE_NP. PTHREAD_MUTEX_NORMAL mutexes do not elide. The elision default can be set at configure time. This patch implements the basic infrastructure for elision.
2012-11-10 08:51:26 +00:00
break;
}
}
}
else
{
/* Use a normal lock until the threshold counter runs out.
Lost updates possible. */
Use C11-like atomics instead of plain memory accesses in x86 lock elision. This uses atomic operations to access lock elision metadata that is accessed concurrently (ie, adapt_count fields). The size of the data is less than a word but accessed only with atomic loads and stores; therefore, we add support for shorter-size atomic load and stores too. * include/atomic.h (__atomic_check_size_ls): New. (atomic_load_relaxed, atomic_load_acquire, atomic_store_relaxed, atomic_store_release): Use it. * sysdeps/x86/elide.h (ACCESS_ONCE): Remove. (elision_adapt, ELIDE_LOCK): Use atomics. * sysdeps/unix/sysv/linux/x86/elision-lock.c (__lll_lock_elision): Use atomics and improve code comments. * sysdeps/unix/sysv/linux/x86/elision-trylock.c (__lll_trylock_elision): Likewise.
2016-11-30 16:53:11 +00:00
atomic_store_relaxed (adapt_count,
atomic_load_relaxed (adapt_count) - 1);
Add the low level infrastructure for pthreads lock elision with TSX Lock elision using TSX is a technique to optimize lock scaling It allows to run locks in parallel using hardware support for a transactional execution mode in 4th generation Intel Core CPUs. See http://www.intel.com/software/tsx for more Information. This patch implements a simple adaptive lock elision algorithm based on RTM. It enables elision for the pthread mutexes and rwlocks. The algorithm keeps track whether a mutex successfully elides or not, and stops eliding for some time when it is not. When the CPU supports RTM the elision path is automatically tried, otherwise any elision is disabled. The adaptation algorithm and its tuning is currently preliminary. The code adds some checks to the lock fast paths. Micro-benchmarks show little to no difference without RTM. This patch implements the low level "lll_" code for lock elision. Followon patches hook this into the pthread implementation Changes with the RTM mutexes: ----------------------------- Lock elision in pthreads is generally compatible with existing programs. There are some obscure exceptions, which are expected to be uncommon. See the manual for more details. - A broken program that unlocks a free lock will crash. There are ways around this with some tradeoffs (more code in hot paths) I'm still undecided on what approach to take here; have to wait for testing reports. - pthread_mutex_destroy of a lock mutex will not return EBUSY but 0. - There's also a similar situation with trylock outside the mutex, "knowing" that the mutex must be held due to some other condition. In this case an assert failure cannot be recovered. This situation is usually an existing bug in the program. - Same applies to the rwlocks. Some of the return values changes (for example there is no EDEADLK for an elided lock, unless it aborts. However when elided it will also never deadlock of course) - Timing changes, so broken programs that make assumptions about specific timing may expose already existing latent problems. Note that these broken programs will break in other situations too (loaded system, new faster hardware, compiler optimizations etc.) - Programs with non recursive mutexes that take them recursively in a thread and which would always deadlock without elision may not always see a deadlock. The deadlock will only happen on an early or delayed abort (which typically happens at some point) This only happens for mutexes not explicitely set to PTHREAD_MUTEX_NORMAL or PTHREAD_MUTEX_ADAPTIVE_NP. PTHREAD_MUTEX_NORMAL mutexes do not elide. The elision default can be set at configure time. This patch implements the basic infrastructure for elision.
2012-11-10 08:51:26 +00:00
}
/* Use a normal lock here. */
return LLL_LOCK ((*futex), private);
}
nptl: Move elision implementations into libc The elision interfaces are closely aligned between the targets that implement them, so declare them in the generic <lowlevellock.h> file. Empty .c stubs are provided, so that fewer makefile updates under sysdeps are needed. Also simplify initialization via __libc_early_init. The symbols __lll_clocklock_elision, __lll_lock_elision, __lll_trylock_elision, __lll_unlock_elision, __pthread_force_elision move into libc. For the time being, non-hidden references are used from libpthread to access them, but once that part of libpthread is moved into libc, hidden symbols will be used again. (Hidden references seem desirable to reduce the likelihood of transactions aborts.)
2021-02-23 13:59:34 +00:00
libc_hidden_def (__lll_lock_elision)
Reference in New Issue Copy Permalink