Build most libm-test support code once per type.
libm-test-driver.c contains various functions used in the course of
libm testing, which are built as part of each test using this
machinery.
Currently, these functions get built for three tests for each type
(e.g. test-float, test-ifloat, test-float-finite), plus the vector
function tests. All these tests are huge and thus slow to build; the
output of gen-libm-test.pl totals around 40 MB across all functions.
To make the individual tests built from the Makefile smaller, it makes
sense to split these tests up so the tests for each function are built
separately (thus, three tests for each (function, type) pair, plus
vector tests built only for functions that actually have vector
versions). This improves parallelism and means that if tests fail,
the summary of failed tests makes it more obvious where the problem
might be without needing to look in the .out files to see which
functions' tests failed (though architecture maintainers still need to
keep libm-test-ulps up to date to avoid spurious failures of little
interest).
Simply including libm-test-driver.c as-is in such individual-function
tests does not work because of unused static check_* functions (those
functions only being used for the types of the outputs of the function
under test). It also means the common code gets built over 1000 times
instead of nine (plus vector tests). To avoid that issue, this patch
splits out the bulk of the libm-test-driver.c code into a separate
file libm-test-support.c (with a few functions made non-static). That
separate file is built only once for each floating-point type (so at
present three times, or twice on architectures with long double =
double). Definitions needed in both libm-test-support.c and
libm-test-driver.c go in libm-test-support.h (it's possible some of
those are in fact only needed in one of the two files).
libm-test-driver.c keeps definitions of a limited number of variables
used to configure how libm-test-support.c behaves, various macros and
structures needed by individual-function tests, and the main function.
This move is also consistent in spirit with the move away from
test-skeleton.c having all the test support code, to a small
support/test-driver.c included in individual tests with most of the
code built separately.
Tested for x86_64 and x86.
* math/libm-test-support.c: New file. Content from
math/libm-test-driver.c.
* math/libm-test-support.h: Likewise.
* math/libm-test-support-double.c: New file.
* math/libm-test-support-float.c: Likewise.
* math/libm-test-support-ldouble.c: Likewise.
* math/libm-test-driver.c: Remove main comment and header
includes. Include libm-test-support.h.
[!_GNU_SOURCE] (_GNU_SOURCE): Do not define.
(flag_test_errno): Remove static.
(flag_test_exceptions): Likewise.
(flag_test_finite): Likewise.
(flag_test_inline): Likewise.
(flag_test_mathvec): Likewise.
(test_msg): Likewise.
(NO_EXCEPTION): Remove.
(INVALID_EXCEPTION): Likewise.
(DIVIDE_BY_ZERO_EXCEPTION): Likewise.
(OVERFLOW_EXCEPTION): Likewise.
(UNDERFLOW_EXCEPTION): Likewise.
(INEXACT_EXCEPTION): Likewise.
(INVALID_EXCEPTION_OK): Likewise.
(DIVIDE_BY_ZERO_EXCEPTION_OK): Likewise.
(OVERFLOW_EXCEPTION_OK): Likewise.
(UNDERFLOW_EXCEPTION_OK): Likewise.
(NO_INEXACT_EXCEPTION): Likewise.
(EXCEPTIONS_OK): Likewise.
(IGNORE_ZERO_INF_SIGN): Likewise.
(TEST_NAN_SIGN): Likewise.
(TEST_NAN_PAYLOAD): Likewise.
(NO_TEST_INLINE): Likewise.
(XFAIL_TEST): Likewise.
(ERRNO_UNCHANGED): Likewise.
(ERRNO_EDOM): Likewise.
(ERRNO_ERANGE): Likewise.
(IGNORE_RESULT): Likewise.
(NON_FINITE): Likewise.
(TEST_SNAN): Likewise.
(NO_TEST_MATHVEC): Likewise.
(__CONCATX): Likewise.
(TYPE_MIN): Likewise.
(TYPE_TRUE_MIN): Likewise.
(TYPE_MAX): Likewise.
(MIN_EXP): Likewise.
(MAX_EXP): Likewise.
(MANT_DIG): Likewise.
(FSTR_MAX): Likewise.
(ulp_idx): Likewise.
(qtype_str): Remove static.
(TEST_COND_binary32): Remove.
(TEST_COND_binary64): Likewise.
(TEST_COND_binary128): Likewise.
(TEST_COND_ibm128): Likewise.
(TEST_COND_intel96): Likewise.
(TEST_COND_m68k96): Likewise.
(TEST_COND_ibm128_libgcc): Likewise.
(XFAIL_IBM128_LIBGCC): Likewise.
(PAYLOAD_DIG): Likewise.
(UNDERFLOW_EXCEPTION_FLOAT): Likewise.
(UNDERFLOW_EXCEPTION_OK_FLOAT): Likewise.
(UNDERFLOW_EXCEPTION_DOUBLE): Likewise.
(UNDERFLOW_EXCEPTION_OK_DOUBLE): Likewise.
(UNDERFLOW_EXCEPTION_LDOUBLE_IBM): Likewise.
(UNDERFLOW_EXCEPTION_BEFORE_ROUNDING): Likewise.
(TEST_COND_long32): Likewise.
(TEST_COND_long64): Likewise.
(TEST_COND_before_rounding): Likewise.
(TEST_COND_after_rounding): Likewise.
(ulps_file_name): Likewise.
(ulps_file): Likewise.
(output_ulps): Likewise.
(output_dir): Likewise.
(noErrors): Likewise.
(noTests): Likewise.
(noExcTests): Likewise.
(noErrnoTests): Likewise.
(verbose): Likewise.
(output_max_error): Likewise.
(output_points): Likewise.
(ignore_max_ulp): Likewise.
(max_error): Likewise.
(real_max_error): Likewise.
(imag_max_error): Likewise.
(prev_max_error): Likewise.
(prev_real_max_error): Likewise.
(prev_imag_max_error): Likewise.
(max_valid_error): Likewise.
(TYPE_DECIMAL_DIG): Likewise.
(TYPE_HEX_DIG): Likewise.
(fmt_ftostr): Likewise.
(compare_ulp_data): Likewise.
(find_ulps): Likewise.
(init_max_error): Likewise.
(set_max_error): Likewise.
(print_float): Likewise.
(print_screen): Likewise.
(print_screen_max_error): Likewise.
(update_stats): Likewise.
(print_function_ulps): Likewise.
(print_complex_function_ulps): Likewise.
(fpstack_test): Likewise.
(print_max_error): Likewise.
(print_complex_max_error): Likewise.
(test_single_exception): Likewise.
(test_exceptions): Likewise.
(test_single_errno): Likewise.
(test_errno): Likewise.
(ULPDIFF): Likewise.
(ulp): Likewise.
(check_float_internal): Likewise.
(check_float): Likewise.
(check_complex): Likewise.
(check_int): Likewise.
(check_long): Likewise.
(check_bool): Likewise.
(check_longlong): Likewise.
(check_intmax_t): Likewise.
(check_uintmax_t): Likewise.
(enable_test): Likewise.
(matherr): Likewise.
(initialize): Likewise.
(options): Likewise.
(doc): Remove static.
(argp): Likewise.
(parse_opt): Remove.
(check_ulp): Likewise.
(libm_test_init): Likewise.
(libm_test_finish): Likewise.
* math/Makefile (libm-test-support): New variable.
(test-extras): Add libm-test-support files.
(extra-test-objs): Likewise.
(CFLAGS-libm-test-support-float.c): New variable.
(CFLAGS-libm-test-support-double.c): Likewise.
(CFLAGS-libm-test-support-ldouble.c): Likewise.
($(addprefix $(objpfx),$(libm-tests)): Depend on appropriate
libm-test-support objects.
2017-02-08 21:11:49 +00:00
|
|
|
/* Support code for testing libm functions (compiled once per type).
|
2023-01-06 21:08:04 +00:00
|
|
|
Copyright (C) 1997-2023 Free Software Foundation, Inc.
|
Build most libm-test support code once per type.
libm-test-driver.c contains various functions used in the course of
libm testing, which are built as part of each test using this
machinery.
Currently, these functions get built for three tests for each type
(e.g. test-float, test-ifloat, test-float-finite), plus the vector
function tests. All these tests are huge and thus slow to build; the
output of gen-libm-test.pl totals around 40 MB across all functions.
To make the individual tests built from the Makefile smaller, it makes
sense to split these tests up so the tests for each function are built
separately (thus, three tests for each (function, type) pair, plus
vector tests built only for functions that actually have vector
versions). This improves parallelism and means that if tests fail,
the summary of failed tests makes it more obvious where the problem
might be without needing to look in the .out files to see which
functions' tests failed (though architecture maintainers still need to
keep libm-test-ulps up to date to avoid spurious failures of little
interest).
Simply including libm-test-driver.c as-is in such individual-function
tests does not work because of unused static check_* functions (those
functions only being used for the types of the outputs of the function
under test). It also means the common code gets built over 1000 times
instead of nine (plus vector tests). To avoid that issue, this patch
splits out the bulk of the libm-test-driver.c code into a separate
file libm-test-support.c (with a few functions made non-static). That
separate file is built only once for each floating-point type (so at
present three times, or twice on architectures with long double =
double). Definitions needed in both libm-test-support.c and
libm-test-driver.c go in libm-test-support.h (it's possible some of
those are in fact only needed in one of the two files).
libm-test-driver.c keeps definitions of a limited number of variables
used to configure how libm-test-support.c behaves, various macros and
structures needed by individual-function tests, and the main function.
This move is also consistent in spirit with the move away from
test-skeleton.c having all the test support code, to a small
support/test-driver.c included in individual tests with most of the
code built separately.
Tested for x86_64 and x86.
* math/libm-test-support.c: New file. Content from
math/libm-test-driver.c.
* math/libm-test-support.h: Likewise.
* math/libm-test-support-double.c: New file.
* math/libm-test-support-float.c: Likewise.
* math/libm-test-support-ldouble.c: Likewise.
* math/libm-test-driver.c: Remove main comment and header
includes. Include libm-test-support.h.
[!_GNU_SOURCE] (_GNU_SOURCE): Do not define.
(flag_test_errno): Remove static.
(flag_test_exceptions): Likewise.
(flag_test_finite): Likewise.
(flag_test_inline): Likewise.
(flag_test_mathvec): Likewise.
(test_msg): Likewise.
(NO_EXCEPTION): Remove.
(INVALID_EXCEPTION): Likewise.
(DIVIDE_BY_ZERO_EXCEPTION): Likewise.
(OVERFLOW_EXCEPTION): Likewise.
(UNDERFLOW_EXCEPTION): Likewise.
(INEXACT_EXCEPTION): Likewise.
(INVALID_EXCEPTION_OK): Likewise.
(DIVIDE_BY_ZERO_EXCEPTION_OK): Likewise.
(OVERFLOW_EXCEPTION_OK): Likewise.
(UNDERFLOW_EXCEPTION_OK): Likewise.
(NO_INEXACT_EXCEPTION): Likewise.
(EXCEPTIONS_OK): Likewise.
(IGNORE_ZERO_INF_SIGN): Likewise.
(TEST_NAN_SIGN): Likewise.
(TEST_NAN_PAYLOAD): Likewise.
(NO_TEST_INLINE): Likewise.
(XFAIL_TEST): Likewise.
(ERRNO_UNCHANGED): Likewise.
(ERRNO_EDOM): Likewise.
(ERRNO_ERANGE): Likewise.
(IGNORE_RESULT): Likewise.
(NON_FINITE): Likewise.
(TEST_SNAN): Likewise.
(NO_TEST_MATHVEC): Likewise.
(__CONCATX): Likewise.
(TYPE_MIN): Likewise.
(TYPE_TRUE_MIN): Likewise.
(TYPE_MAX): Likewise.
(MIN_EXP): Likewise.
(MAX_EXP): Likewise.
(MANT_DIG): Likewise.
(FSTR_MAX): Likewise.
(ulp_idx): Likewise.
(qtype_str): Remove static.
(TEST_COND_binary32): Remove.
(TEST_COND_binary64): Likewise.
(TEST_COND_binary128): Likewise.
(TEST_COND_ibm128): Likewise.
(TEST_COND_intel96): Likewise.
(TEST_COND_m68k96): Likewise.
(TEST_COND_ibm128_libgcc): Likewise.
(XFAIL_IBM128_LIBGCC): Likewise.
(PAYLOAD_DIG): Likewise.
(UNDERFLOW_EXCEPTION_FLOAT): Likewise.
(UNDERFLOW_EXCEPTION_OK_FLOAT): Likewise.
(UNDERFLOW_EXCEPTION_DOUBLE): Likewise.
(UNDERFLOW_EXCEPTION_OK_DOUBLE): Likewise.
(UNDERFLOW_EXCEPTION_LDOUBLE_IBM): Likewise.
(UNDERFLOW_EXCEPTION_BEFORE_ROUNDING): Likewise.
(TEST_COND_long32): Likewise.
(TEST_COND_long64): Likewise.
(TEST_COND_before_rounding): Likewise.
(TEST_COND_after_rounding): Likewise.
(ulps_file_name): Likewise.
(ulps_file): Likewise.
(output_ulps): Likewise.
(output_dir): Likewise.
(noErrors): Likewise.
(noTests): Likewise.
(noExcTests): Likewise.
(noErrnoTests): Likewise.
(verbose): Likewise.
(output_max_error): Likewise.
(output_points): Likewise.
(ignore_max_ulp): Likewise.
(max_error): Likewise.
(real_max_error): Likewise.
(imag_max_error): Likewise.
(prev_max_error): Likewise.
(prev_real_max_error): Likewise.
(prev_imag_max_error): Likewise.
(max_valid_error): Likewise.
(TYPE_DECIMAL_DIG): Likewise.
(TYPE_HEX_DIG): Likewise.
(fmt_ftostr): Likewise.
(compare_ulp_data): Likewise.
(find_ulps): Likewise.
(init_max_error): Likewise.
(set_max_error): Likewise.
(print_float): Likewise.
(print_screen): Likewise.
(print_screen_max_error): Likewise.
(update_stats): Likewise.
(print_function_ulps): Likewise.
(print_complex_function_ulps): Likewise.
(fpstack_test): Likewise.
(print_max_error): Likewise.
(print_complex_max_error): Likewise.
(test_single_exception): Likewise.
(test_exceptions): Likewise.
(test_single_errno): Likewise.
(test_errno): Likewise.
(ULPDIFF): Likewise.
(ulp): Likewise.
(check_float_internal): Likewise.
(check_float): Likewise.
(check_complex): Likewise.
(check_int): Likewise.
(check_long): Likewise.
(check_bool): Likewise.
(check_longlong): Likewise.
(check_intmax_t): Likewise.
(check_uintmax_t): Likewise.
(enable_test): Likewise.
(matherr): Likewise.
(initialize): Likewise.
(options): Likewise.
(doc): Remove static.
(argp): Likewise.
(parse_opt): Remove.
(check_ulp): Likewise.
(libm_test_init): Likewise.
(libm_test_finish): Likewise.
* math/Makefile (libm-test-support): New variable.
(test-extras): Add libm-test-support files.
(extra-test-objs): Likewise.
(CFLAGS-libm-test-support-float.c): New variable.
(CFLAGS-libm-test-support-double.c): Likewise.
(CFLAGS-libm-test-support-ldouble.c): Likewise.
($(addprefix $(objpfx),$(libm-tests)): Depend on appropriate
libm-test-support objects.
2017-02-08 21:11:49 +00:00
|
|
|
This file is part of the GNU C Library.
|
|
|
|
|
|
|
|
The GNU C Library is free software; you can redistribute it and/or
|
|
|
|
modify it under the terms of the GNU Lesser General Public
|
|
|
|
License as published by the Free Software Foundation; either
|
|
|
|
version 2.1 of the License, or (at your option) any later version.
|
|
|
|
|
|
|
|
The GNU C Library is distributed in the hope that it will be useful,
|
|
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
|
|
Lesser General Public License for more details.
|
|
|
|
|
|
|
|
You should have received a copy of the GNU Lesser General Public
|
|
|
|
License along with the GNU C Library; if not, see
|
Prefer https to http for gnu.org and fsf.org URLs
Also, change sources.redhat.com to sourceware.org.
This patch was automatically generated by running the following shell
script, which uses GNU sed, and which avoids modifying files imported
from upstream:
sed -ri '
s,(http|ftp)(://(.*\.)?(gnu|fsf|sourceware)\.org($|[^.]|\.[^a-z])),https\2,g
s,(http|ftp)(://(.*\.)?)sources\.redhat\.com($|[^.]|\.[^a-z]),https\2sourceware.org\4,g
' \
$(find $(git ls-files) -prune -type f \
! -name '*.po' \
! -name 'ChangeLog*' \
! -path COPYING ! -path COPYING.LIB \
! -path manual/fdl-1.3.texi ! -path manual/lgpl-2.1.texi \
! -path manual/texinfo.tex ! -path scripts/config.guess \
! -path scripts/config.sub ! -path scripts/install-sh \
! -path scripts/mkinstalldirs ! -path scripts/move-if-change \
! -path INSTALL ! -path locale/programs/charmap-kw.h \
! -path po/libc.pot ! -path sysdeps/gnu/errlist.c \
! '(' -name configure \
-execdir test -f configure.ac -o -f configure.in ';' ')' \
! '(' -name preconfigure \
-execdir test -f preconfigure.ac ';' ')' \
-print)
and then by running 'make dist-prepare' to regenerate files built
from the altered files, and then executing the following to cleanup:
chmod a+x sysdeps/unix/sysv/linux/riscv/configure
# Omit irrelevant whitespace and comment-only changes,
# perhaps from a slightly-different Autoconf version.
git checkout -f \
sysdeps/csky/configure \
sysdeps/hppa/configure \
sysdeps/riscv/configure \
sysdeps/unix/sysv/linux/csky/configure
# Omit changes that caused a pre-commit check to fail like this:
# remote: *** error: sysdeps/powerpc/powerpc64/ppc-mcount.S: trailing lines
git checkout -f \
sysdeps/powerpc/powerpc64/ppc-mcount.S \
sysdeps/unix/sysv/linux/s390/s390-64/syscall.S
# Omit change that caused a pre-commit check to fail like this:
# remote: *** error: sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S: last line does not end in newline
git checkout -f sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S
2019-09-07 05:40:42 +00:00
|
|
|
<https://www.gnu.org/licenses/>. */
|
Build most libm-test support code once per type.
libm-test-driver.c contains various functions used in the course of
libm testing, which are built as part of each test using this
machinery.
Currently, these functions get built for three tests for each type
(e.g. test-float, test-ifloat, test-float-finite), plus the vector
function tests. All these tests are huge and thus slow to build; the
output of gen-libm-test.pl totals around 40 MB across all functions.
To make the individual tests built from the Makefile smaller, it makes
sense to split these tests up so the tests for each function are built
separately (thus, three tests for each (function, type) pair, plus
vector tests built only for functions that actually have vector
versions). This improves parallelism and means that if tests fail,
the summary of failed tests makes it more obvious where the problem
might be without needing to look in the .out files to see which
functions' tests failed (though architecture maintainers still need to
keep libm-test-ulps up to date to avoid spurious failures of little
interest).
Simply including libm-test-driver.c as-is in such individual-function
tests does not work because of unused static check_* functions (those
functions only being used for the types of the outputs of the function
under test). It also means the common code gets built over 1000 times
instead of nine (plus vector tests). To avoid that issue, this patch
splits out the bulk of the libm-test-driver.c code into a separate
file libm-test-support.c (with a few functions made non-static). That
separate file is built only once for each floating-point type (so at
present three times, or twice on architectures with long double =
double). Definitions needed in both libm-test-support.c and
libm-test-driver.c go in libm-test-support.h (it's possible some of
those are in fact only needed in one of the two files).
libm-test-driver.c keeps definitions of a limited number of variables
used to configure how libm-test-support.c behaves, various macros and
structures needed by individual-function tests, and the main function.
This move is also consistent in spirit with the move away from
test-skeleton.c having all the test support code, to a small
support/test-driver.c included in individual tests with most of the
code built separately.
Tested for x86_64 and x86.
* math/libm-test-support.c: New file. Content from
math/libm-test-driver.c.
* math/libm-test-support.h: Likewise.
* math/libm-test-support-double.c: New file.
* math/libm-test-support-float.c: Likewise.
* math/libm-test-support-ldouble.c: Likewise.
* math/libm-test-driver.c: Remove main comment and header
includes. Include libm-test-support.h.
[!_GNU_SOURCE] (_GNU_SOURCE): Do not define.
(flag_test_errno): Remove static.
(flag_test_exceptions): Likewise.
(flag_test_finite): Likewise.
(flag_test_inline): Likewise.
(flag_test_mathvec): Likewise.
(test_msg): Likewise.
(NO_EXCEPTION): Remove.
(INVALID_EXCEPTION): Likewise.
(DIVIDE_BY_ZERO_EXCEPTION): Likewise.
(OVERFLOW_EXCEPTION): Likewise.
(UNDERFLOW_EXCEPTION): Likewise.
(INEXACT_EXCEPTION): Likewise.
(INVALID_EXCEPTION_OK): Likewise.
(DIVIDE_BY_ZERO_EXCEPTION_OK): Likewise.
(OVERFLOW_EXCEPTION_OK): Likewise.
(UNDERFLOW_EXCEPTION_OK): Likewise.
(NO_INEXACT_EXCEPTION): Likewise.
(EXCEPTIONS_OK): Likewise.
(IGNORE_ZERO_INF_SIGN): Likewise.
(TEST_NAN_SIGN): Likewise.
(TEST_NAN_PAYLOAD): Likewise.
(NO_TEST_INLINE): Likewise.
(XFAIL_TEST): Likewise.
(ERRNO_UNCHANGED): Likewise.
(ERRNO_EDOM): Likewise.
(ERRNO_ERANGE): Likewise.
(IGNORE_RESULT): Likewise.
(NON_FINITE): Likewise.
(TEST_SNAN): Likewise.
(NO_TEST_MATHVEC): Likewise.
(__CONCATX): Likewise.
(TYPE_MIN): Likewise.
(TYPE_TRUE_MIN): Likewise.
(TYPE_MAX): Likewise.
(MIN_EXP): Likewise.
(MAX_EXP): Likewise.
(MANT_DIG): Likewise.
(FSTR_MAX): Likewise.
(ulp_idx): Likewise.
(qtype_str): Remove static.
(TEST_COND_binary32): Remove.
(TEST_COND_binary64): Likewise.
(TEST_COND_binary128): Likewise.
(TEST_COND_ibm128): Likewise.
(TEST_COND_intel96): Likewise.
(TEST_COND_m68k96): Likewise.
(TEST_COND_ibm128_libgcc): Likewise.
(XFAIL_IBM128_LIBGCC): Likewise.
(PAYLOAD_DIG): Likewise.
(UNDERFLOW_EXCEPTION_FLOAT): Likewise.
(UNDERFLOW_EXCEPTION_OK_FLOAT): Likewise.
(UNDERFLOW_EXCEPTION_DOUBLE): Likewise.
(UNDERFLOW_EXCEPTION_OK_DOUBLE): Likewise.
(UNDERFLOW_EXCEPTION_LDOUBLE_IBM): Likewise.
(UNDERFLOW_EXCEPTION_BEFORE_ROUNDING): Likewise.
(TEST_COND_long32): Likewise.
(TEST_COND_long64): Likewise.
(TEST_COND_before_rounding): Likewise.
(TEST_COND_after_rounding): Likewise.
(ulps_file_name): Likewise.
(ulps_file): Likewise.
(output_ulps): Likewise.
(output_dir): Likewise.
(noErrors): Likewise.
(noTests): Likewise.
(noExcTests): Likewise.
(noErrnoTests): Likewise.
(verbose): Likewise.
(output_max_error): Likewise.
(output_points): Likewise.
(ignore_max_ulp): Likewise.
(max_error): Likewise.
(real_max_error): Likewise.
(imag_max_error): Likewise.
(prev_max_error): Likewise.
(prev_real_max_error): Likewise.
(prev_imag_max_error): Likewise.
(max_valid_error): Likewise.
(TYPE_DECIMAL_DIG): Likewise.
(TYPE_HEX_DIG): Likewise.
(fmt_ftostr): Likewise.
(compare_ulp_data): Likewise.
(find_ulps): Likewise.
(init_max_error): Likewise.
(set_max_error): Likewise.
(print_float): Likewise.
(print_screen): Likewise.
(print_screen_max_error): Likewise.
(update_stats): Likewise.
(print_function_ulps): Likewise.
(print_complex_function_ulps): Likewise.
(fpstack_test): Likewise.
(print_max_error): Likewise.
(print_complex_max_error): Likewise.
(test_single_exception): Likewise.
(test_exceptions): Likewise.
(test_single_errno): Likewise.
(test_errno): Likewise.
(ULPDIFF): Likewise.
(ulp): Likewise.
(check_float_internal): Likewise.
(check_float): Likewise.
(check_complex): Likewise.
(check_int): Likewise.
(check_long): Likewise.
(check_bool): Likewise.
(check_longlong): Likewise.
(check_intmax_t): Likewise.
(check_uintmax_t): Likewise.
(enable_test): Likewise.
(matherr): Likewise.
(initialize): Likewise.
(options): Likewise.
(doc): Remove static.
(argp): Likewise.
(parse_opt): Remove.
(check_ulp): Likewise.
(libm_test_init): Likewise.
(libm_test_finish): Likewise.
* math/Makefile (libm-test-support): New variable.
(test-extras): Add libm-test-support files.
(extra-test-objs): Likewise.
(CFLAGS-libm-test-support-float.c): New variable.
(CFLAGS-libm-test-support-double.c): Likewise.
(CFLAGS-libm-test-support-ldouble.c): Likewise.
($(addprefix $(objpfx),$(libm-tests)): Depend on appropriate
libm-test-support objects.
2017-02-08 21:11:49 +00:00
|
|
|
|
|
|
|
/* Part of testsuite for libm.
|
|
|
|
|
|
|
|
libm-test-support.c contains functions shared by tests of different
|
|
|
|
libm functions and types; it is compiled once per type.
|
|
|
|
libm-test-driver.c defines the main function, and various variables
|
|
|
|
that are used to configure the code in libm-test-support.c for
|
|
|
|
different types and for variants such as testing inline functions.
|
|
|
|
|
|
|
|
The tests of individual functions are in .inc files processed by
|
Replace gen-libm-test.pl with gen-libm-test.py.
Following the recent discussion of using Python instead of Perl and
Awk for glibc build / test, this patch replaces gen-libm-test.pl with
a new gen-libm-test.py script. This script should work with all
Python versions supported by glibc (tested by hand with Python 2.7,
tested in the build system with Python 3.5; configure prefers Python 3
if available).
This script is designed to give identical output to gen-libm-test.pl
for ease of verification of the change, except for generated comments
referring to .py instead of .pl. (That is, identical for actual
inputs passed to the script, not necessarily for all possible input;
for example, this version more precisely follows the C standard syntax
for floating-point constants when deciding when to add LIT macro
calls.) In one place a comment notes that the generation of
NON_FINITE flags is replicating a bug in the Perl script to assist in
such comparisons (with the expectation that this bug can then be
separately fixed in the Python script later).
Tested for x86_64, including comparison of generated files (and hand
testing of the case of generating a sorted libm-test-ulps file, which
isn't covered by normal "make check").
I'd expect to follow this up by extending the new script to produce
the ulps tables for the manual as well (replacing
manual/libm-err-tab.pl, so that then we just have one ulps file
parser) - at which point the manual build would depend on both Perl
and Python (eliminating the Perl dependency would require someone to
rewrite summary.pl in Python, and that would only eliminate the
*direct* Perl dependency; current makeinfo is written in Perl so there
would still be an indirect dependency).
I think install.texi is more or less equally out-of-date regarding
Perl and Python uses before and after this patch, so I don't think
this patch depends on my patch
<https://sourceware.org/ml/libc-alpha/2018-08/msg00133.html> to update
install.texi regarding such uses (pending review).
* math/gen-libm-test.py: New file.
* math/gen-libm-test.pl: Remove.
* math/Makefile [$(PERL) != no]: Change condition to [PYTHON].
($(objpfx)libm-test-ulps.h): Use gen-libm-test.py instead of
gen-libm-test.pl.
($(libm-test-c-noauto-obj)): Likewise.
($(libm-test-c-auto-obj)): Likewise.
($(libm-test-c-narrow-obj)): Likewise.
(regen-ulps): Likewise.
* math/README.libm-test: Update references to gen-libm-test.pl.
* math/libm-test-driver.c (struct test_fj_f_data): Update comment
referencing gen-libm-test.pl.
* math/libm-test-nexttoward.inc (nexttoward_test_data): Likewise.
* math/libm-test-support.c: Likewise.
* math/libm-test-support.h: Likewise.
* sysdeps/generic/libm-test-ulps: Likewise.
2018-08-09 15:34:12 +00:00
|
|
|
gen-libm-test.py, with the resulting files included together with
|
Build most libm-test support code once per type.
libm-test-driver.c contains various functions used in the course of
libm testing, which are built as part of each test using this
machinery.
Currently, these functions get built for three tests for each type
(e.g. test-float, test-ifloat, test-float-finite), plus the vector
function tests. All these tests are huge and thus slow to build; the
output of gen-libm-test.pl totals around 40 MB across all functions.
To make the individual tests built from the Makefile smaller, it makes
sense to split these tests up so the tests for each function are built
separately (thus, three tests for each (function, type) pair, plus
vector tests built only for functions that actually have vector
versions). This improves parallelism and means that if tests fail,
the summary of failed tests makes it more obvious where the problem
might be without needing to look in the .out files to see which
functions' tests failed (though architecture maintainers still need to
keep libm-test-ulps up to date to avoid spurious failures of little
interest).
Simply including libm-test-driver.c as-is in such individual-function
tests does not work because of unused static check_* functions (those
functions only being used for the types of the outputs of the function
under test). It also means the common code gets built over 1000 times
instead of nine (plus vector tests). To avoid that issue, this patch
splits out the bulk of the libm-test-driver.c code into a separate
file libm-test-support.c (with a few functions made non-static). That
separate file is built only once for each floating-point type (so at
present three times, or twice on architectures with long double =
double). Definitions needed in both libm-test-support.c and
libm-test-driver.c go in libm-test-support.h (it's possible some of
those are in fact only needed in one of the two files).
libm-test-driver.c keeps definitions of a limited number of variables
used to configure how libm-test-support.c behaves, various macros and
structures needed by individual-function tests, and the main function.
This move is also consistent in spirit with the move away from
test-skeleton.c having all the test support code, to a small
support/test-driver.c included in individual tests with most of the
code built separately.
Tested for x86_64 and x86.
* math/libm-test-support.c: New file. Content from
math/libm-test-driver.c.
* math/libm-test-support.h: Likewise.
* math/libm-test-support-double.c: New file.
* math/libm-test-support-float.c: Likewise.
* math/libm-test-support-ldouble.c: Likewise.
* math/libm-test-driver.c: Remove main comment and header
includes. Include libm-test-support.h.
[!_GNU_SOURCE] (_GNU_SOURCE): Do not define.
(flag_test_errno): Remove static.
(flag_test_exceptions): Likewise.
(flag_test_finite): Likewise.
(flag_test_inline): Likewise.
(flag_test_mathvec): Likewise.
(test_msg): Likewise.
(NO_EXCEPTION): Remove.
(INVALID_EXCEPTION): Likewise.
(DIVIDE_BY_ZERO_EXCEPTION): Likewise.
(OVERFLOW_EXCEPTION): Likewise.
(UNDERFLOW_EXCEPTION): Likewise.
(INEXACT_EXCEPTION): Likewise.
(INVALID_EXCEPTION_OK): Likewise.
(DIVIDE_BY_ZERO_EXCEPTION_OK): Likewise.
(OVERFLOW_EXCEPTION_OK): Likewise.
(UNDERFLOW_EXCEPTION_OK): Likewise.
(NO_INEXACT_EXCEPTION): Likewise.
(EXCEPTIONS_OK): Likewise.
(IGNORE_ZERO_INF_SIGN): Likewise.
(TEST_NAN_SIGN): Likewise.
(TEST_NAN_PAYLOAD): Likewise.
(NO_TEST_INLINE): Likewise.
(XFAIL_TEST): Likewise.
(ERRNO_UNCHANGED): Likewise.
(ERRNO_EDOM): Likewise.
(ERRNO_ERANGE): Likewise.
(IGNORE_RESULT): Likewise.
(NON_FINITE): Likewise.
(TEST_SNAN): Likewise.
(NO_TEST_MATHVEC): Likewise.
(__CONCATX): Likewise.
(TYPE_MIN): Likewise.
(TYPE_TRUE_MIN): Likewise.
(TYPE_MAX): Likewise.
(MIN_EXP): Likewise.
(MAX_EXP): Likewise.
(MANT_DIG): Likewise.
(FSTR_MAX): Likewise.
(ulp_idx): Likewise.
(qtype_str): Remove static.
(TEST_COND_binary32): Remove.
(TEST_COND_binary64): Likewise.
(TEST_COND_binary128): Likewise.
(TEST_COND_ibm128): Likewise.
(TEST_COND_intel96): Likewise.
(TEST_COND_m68k96): Likewise.
(TEST_COND_ibm128_libgcc): Likewise.
(XFAIL_IBM128_LIBGCC): Likewise.
(PAYLOAD_DIG): Likewise.
(UNDERFLOW_EXCEPTION_FLOAT): Likewise.
(UNDERFLOW_EXCEPTION_OK_FLOAT): Likewise.
(UNDERFLOW_EXCEPTION_DOUBLE): Likewise.
(UNDERFLOW_EXCEPTION_OK_DOUBLE): Likewise.
(UNDERFLOW_EXCEPTION_LDOUBLE_IBM): Likewise.
(UNDERFLOW_EXCEPTION_BEFORE_ROUNDING): Likewise.
(TEST_COND_long32): Likewise.
(TEST_COND_long64): Likewise.
(TEST_COND_before_rounding): Likewise.
(TEST_COND_after_rounding): Likewise.
(ulps_file_name): Likewise.
(ulps_file): Likewise.
(output_ulps): Likewise.
(output_dir): Likewise.
(noErrors): Likewise.
(noTests): Likewise.
(noExcTests): Likewise.
(noErrnoTests): Likewise.
(verbose): Likewise.
(output_max_error): Likewise.
(output_points): Likewise.
(ignore_max_ulp): Likewise.
(max_error): Likewise.
(real_max_error): Likewise.
(imag_max_error): Likewise.
(prev_max_error): Likewise.
(prev_real_max_error): Likewise.
(prev_imag_max_error): Likewise.
(max_valid_error): Likewise.
(TYPE_DECIMAL_DIG): Likewise.
(TYPE_HEX_DIG): Likewise.
(fmt_ftostr): Likewise.
(compare_ulp_data): Likewise.
(find_ulps): Likewise.
(init_max_error): Likewise.
(set_max_error): Likewise.
(print_float): Likewise.
(print_screen): Likewise.
(print_screen_max_error): Likewise.
(update_stats): Likewise.
(print_function_ulps): Likewise.
(print_complex_function_ulps): Likewise.
(fpstack_test): Likewise.
(print_max_error): Likewise.
(print_complex_max_error): Likewise.
(test_single_exception): Likewise.
(test_exceptions): Likewise.
(test_single_errno): Likewise.
(test_errno): Likewise.
(ULPDIFF): Likewise.
(ulp): Likewise.
(check_float_internal): Likewise.
(check_float): Likewise.
(check_complex): Likewise.
(check_int): Likewise.
(check_long): Likewise.
(check_bool): Likewise.
(check_longlong): Likewise.
(check_intmax_t): Likewise.
(check_uintmax_t): Likewise.
(enable_test): Likewise.
(matherr): Likewise.
(initialize): Likewise.
(options): Likewise.
(doc): Remove static.
(argp): Likewise.
(parse_opt): Remove.
(check_ulp): Likewise.
(libm_test_init): Likewise.
(libm_test_finish): Likewise.
* math/Makefile (libm-test-support): New variable.
(test-extras): Add libm-test-support files.
(extra-test-objs): Likewise.
(CFLAGS-libm-test-support-float.c): New variable.
(CFLAGS-libm-test-support-double.c): Likewise.
(CFLAGS-libm-test-support-ldouble.c): Likewise.
($(addprefix $(objpfx),$(libm-tests)): Depend on appropriate
libm-test-support objects.
2017-02-08 21:11:49 +00:00
|
|
|
libm-test-driver.c.
|
|
|
|
|
|
|
|
The per-type headers included both before libm-test-support.c and
|
|
|
|
for the tests of individual functions must define the following
|
|
|
|
macros:
|
|
|
|
|
|
|
|
FUNC(function): Convert general function name (like cos) to name
|
|
|
|
with correct suffix (e.g. cosl or cosf).
|
|
|
|
|
|
|
|
FLOAT: Floating-point type to test.
|
|
|
|
|
|
|
|
BUILD_COMPLEX(real, imag): Create a complex number by calling a
|
|
|
|
macro such as CMPLX.
|
|
|
|
|
|
|
|
PREFIX: The prefix for <float.h> macros for the type (e.g. LDBL,
|
|
|
|
DBL, or FLT).
|
|
|
|
|
|
|
|
TYPE_STR: The name of the type as used in ulps files, as a string.
|
|
|
|
|
2020-03-17 18:46:29 +00:00
|
|
|
ULP_IDX: The array indexes for ulps values for this function.
|
2017-10-11 17:46:19 +00:00
|
|
|
|
Build most libm-test support code once per type.
libm-test-driver.c contains various functions used in the course of
libm testing, which are built as part of each test using this
machinery.
Currently, these functions get built for three tests for each type
(e.g. test-float, test-ifloat, test-float-finite), plus the vector
function tests. All these tests are huge and thus slow to build; the
output of gen-libm-test.pl totals around 40 MB across all functions.
To make the individual tests built from the Makefile smaller, it makes
sense to split these tests up so the tests for each function are built
separately (thus, three tests for each (function, type) pair, plus
vector tests built only for functions that actually have vector
versions). This improves parallelism and means that if tests fail,
the summary of failed tests makes it more obvious where the problem
might be without needing to look in the .out files to see which
functions' tests failed (though architecture maintainers still need to
keep libm-test-ulps up to date to avoid spurious failures of little
interest).
Simply including libm-test-driver.c as-is in such individual-function
tests does not work because of unused static check_* functions (those
functions only being used for the types of the outputs of the function
under test). It also means the common code gets built over 1000 times
instead of nine (plus vector tests). To avoid that issue, this patch
splits out the bulk of the libm-test-driver.c code into a separate
file libm-test-support.c (with a few functions made non-static). That
separate file is built only once for each floating-point type (so at
present three times, or twice on architectures with long double =
double). Definitions needed in both libm-test-support.c and
libm-test-driver.c go in libm-test-support.h (it's possible some of
those are in fact only needed in one of the two files).
libm-test-driver.c keeps definitions of a limited number of variables
used to configure how libm-test-support.c behaves, various macros and
structures needed by individual-function tests, and the main function.
This move is also consistent in spirit with the move away from
test-skeleton.c having all the test support code, to a small
support/test-driver.c included in individual tests with most of the
code built separately.
Tested for x86_64 and x86.
* math/libm-test-support.c: New file. Content from
math/libm-test-driver.c.
* math/libm-test-support.h: Likewise.
* math/libm-test-support-double.c: New file.
* math/libm-test-support-float.c: Likewise.
* math/libm-test-support-ldouble.c: Likewise.
* math/libm-test-driver.c: Remove main comment and header
includes. Include libm-test-support.h.
[!_GNU_SOURCE] (_GNU_SOURCE): Do not define.
(flag_test_errno): Remove static.
(flag_test_exceptions): Likewise.
(flag_test_finite): Likewise.
(flag_test_inline): Likewise.
(flag_test_mathvec): Likewise.
(test_msg): Likewise.
(NO_EXCEPTION): Remove.
(INVALID_EXCEPTION): Likewise.
(DIVIDE_BY_ZERO_EXCEPTION): Likewise.
(OVERFLOW_EXCEPTION): Likewise.
(UNDERFLOW_EXCEPTION): Likewise.
(INEXACT_EXCEPTION): Likewise.
(INVALID_EXCEPTION_OK): Likewise.
(DIVIDE_BY_ZERO_EXCEPTION_OK): Likewise.
(OVERFLOW_EXCEPTION_OK): Likewise.
(UNDERFLOW_EXCEPTION_OK): Likewise.
(NO_INEXACT_EXCEPTION): Likewise.
(EXCEPTIONS_OK): Likewise.
(IGNORE_ZERO_INF_SIGN): Likewise.
(TEST_NAN_SIGN): Likewise.
(TEST_NAN_PAYLOAD): Likewise.
(NO_TEST_INLINE): Likewise.
(XFAIL_TEST): Likewise.
(ERRNO_UNCHANGED): Likewise.
(ERRNO_EDOM): Likewise.
(ERRNO_ERANGE): Likewise.
(IGNORE_RESULT): Likewise.
(NON_FINITE): Likewise.
(TEST_SNAN): Likewise.
(NO_TEST_MATHVEC): Likewise.
(__CONCATX): Likewise.
(TYPE_MIN): Likewise.
(TYPE_TRUE_MIN): Likewise.
(TYPE_MAX): Likewise.
(MIN_EXP): Likewise.
(MAX_EXP): Likewise.
(MANT_DIG): Likewise.
(FSTR_MAX): Likewise.
(ulp_idx): Likewise.
(qtype_str): Remove static.
(TEST_COND_binary32): Remove.
(TEST_COND_binary64): Likewise.
(TEST_COND_binary128): Likewise.
(TEST_COND_ibm128): Likewise.
(TEST_COND_intel96): Likewise.
(TEST_COND_m68k96): Likewise.
(TEST_COND_ibm128_libgcc): Likewise.
(XFAIL_IBM128_LIBGCC): Likewise.
(PAYLOAD_DIG): Likewise.
(UNDERFLOW_EXCEPTION_FLOAT): Likewise.
(UNDERFLOW_EXCEPTION_OK_FLOAT): Likewise.
(UNDERFLOW_EXCEPTION_DOUBLE): Likewise.
(UNDERFLOW_EXCEPTION_OK_DOUBLE): Likewise.
(UNDERFLOW_EXCEPTION_LDOUBLE_IBM): Likewise.
(UNDERFLOW_EXCEPTION_BEFORE_ROUNDING): Likewise.
(TEST_COND_long32): Likewise.
(TEST_COND_long64): Likewise.
(TEST_COND_before_rounding): Likewise.
(TEST_COND_after_rounding): Likewise.
(ulps_file_name): Likewise.
(ulps_file): Likewise.
(output_ulps): Likewise.
(output_dir): Likewise.
(noErrors): Likewise.
(noTests): Likewise.
(noExcTests): Likewise.
(noErrnoTests): Likewise.
(verbose): Likewise.
(output_max_error): Likewise.
(output_points): Likewise.
(ignore_max_ulp): Likewise.
(max_error): Likewise.
(real_max_error): Likewise.
(imag_max_error): Likewise.
(prev_max_error): Likewise.
(prev_real_max_error): Likewise.
(prev_imag_max_error): Likewise.
(max_valid_error): Likewise.
(TYPE_DECIMAL_DIG): Likewise.
(TYPE_HEX_DIG): Likewise.
(fmt_ftostr): Likewise.
(compare_ulp_data): Likewise.
(find_ulps): Likewise.
(init_max_error): Likewise.
(set_max_error): Likewise.
(print_float): Likewise.
(print_screen): Likewise.
(print_screen_max_error): Likewise.
(update_stats): Likewise.
(print_function_ulps): Likewise.
(print_complex_function_ulps): Likewise.
(fpstack_test): Likewise.
(print_max_error): Likewise.
(print_complex_max_error): Likewise.
(test_single_exception): Likewise.
(test_exceptions): Likewise.
(test_single_errno): Likewise.
(test_errno): Likewise.
(ULPDIFF): Likewise.
(ulp): Likewise.
(check_float_internal): Likewise.
(check_float): Likewise.
(check_complex): Likewise.
(check_int): Likewise.
(check_long): Likewise.
(check_bool): Likewise.
(check_longlong): Likewise.
(check_intmax_t): Likewise.
(check_uintmax_t): Likewise.
(enable_test): Likewise.
(matherr): Likewise.
(initialize): Likewise.
(options): Likewise.
(doc): Remove static.
(argp): Likewise.
(parse_opt): Remove.
(check_ulp): Likewise.
(libm_test_init): Likewise.
(libm_test_finish): Likewise.
* math/Makefile (libm-test-support): New variable.
(test-extras): Add libm-test-support files.
(extra-test-objs): Likewise.
(CFLAGS-libm-test-support-float.c): New variable.
(CFLAGS-libm-test-support-double.c): Likewise.
(CFLAGS-libm-test-support-ldouble.c): Likewise.
($(addprefix $(objpfx),$(libm-tests)): Depend on appropriate
libm-test-support objects.
2017-02-08 21:11:49 +00:00
|
|
|
LIT: Append the correct suffix to a literal.
|
|
|
|
|
|
|
|
LITM: Append the correct suffix to an M_* macro name.
|
|
|
|
|
|
|
|
FTOSTR: A function similar in type to strfromf which converts a
|
|
|
|
FLOAT to a string.
|
|
|
|
|
|
|
|
snan_value_MACRO: The macro such as SNAN for a signaling NaN for
|
|
|
|
the type.
|
|
|
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
/* Parameter handling is primitive in the moment:
|
|
|
|
--verbose=[0..3] for different levels of output:
|
|
|
|
0: only error count
|
|
|
|
1: basic report on failed tests (default)
|
|
|
|
2: full report on all tests
|
|
|
|
-v for full output (equals --verbose=3)
|
|
|
|
-u for generation of an ULPs file
|
|
|
|
*/
|
|
|
|
|
|
|
|
/* "Philosophy":
|
|
|
|
|
|
|
|
This suite tests some aspects of the correct implementation of
|
|
|
|
mathematical functions in libm. Some simple, specific parameters
|
|
|
|
are tested for correctness but there's no exhaustive
|
|
|
|
testing. Handling of specific inputs (e.g. infinity, not-a-number)
|
|
|
|
is also tested. Correct handling of exceptions is checked
|
|
|
|
against. These implemented tests should check all cases that are
|
|
|
|
specified in ISO C99.
|
|
|
|
|
|
|
|
NaN values: The payload of NaNs is set in inputs for functions
|
|
|
|
where it is significant, and is examined in the outputs of some
|
|
|
|
functions.
|
|
|
|
|
|
|
|
Inline functions: Inlining functions should give an improvement in
|
2023-05-20 13:37:47 +00:00
|
|
|
speed - but not in precision. The inlined functions return
|
Build most libm-test support code once per type.
libm-test-driver.c contains various functions used in the course of
libm testing, which are built as part of each test using this
machinery.
Currently, these functions get built for three tests for each type
(e.g. test-float, test-ifloat, test-float-finite), plus the vector
function tests. All these tests are huge and thus slow to build; the
output of gen-libm-test.pl totals around 40 MB across all functions.
To make the individual tests built from the Makefile smaller, it makes
sense to split these tests up so the tests for each function are built
separately (thus, three tests for each (function, type) pair, plus
vector tests built only for functions that actually have vector
versions). This improves parallelism and means that if tests fail,
the summary of failed tests makes it more obvious where the problem
might be without needing to look in the .out files to see which
functions' tests failed (though architecture maintainers still need to
keep libm-test-ulps up to date to avoid spurious failures of little
interest).
Simply including libm-test-driver.c as-is in such individual-function
tests does not work because of unused static check_* functions (those
functions only being used for the types of the outputs of the function
under test). It also means the common code gets built over 1000 times
instead of nine (plus vector tests). To avoid that issue, this patch
splits out the bulk of the libm-test-driver.c code into a separate
file libm-test-support.c (with a few functions made non-static). That
separate file is built only once for each floating-point type (so at
present three times, or twice on architectures with long double =
double). Definitions needed in both libm-test-support.c and
libm-test-driver.c go in libm-test-support.h (it's possible some of
those are in fact only needed in one of the two files).
libm-test-driver.c keeps definitions of a limited number of variables
used to configure how libm-test-support.c behaves, various macros and
structures needed by individual-function tests, and the main function.
This move is also consistent in spirit with the move away from
test-skeleton.c having all the test support code, to a small
support/test-driver.c included in individual tests with most of the
code built separately.
Tested for x86_64 and x86.
* math/libm-test-support.c: New file. Content from
math/libm-test-driver.c.
* math/libm-test-support.h: Likewise.
* math/libm-test-support-double.c: New file.
* math/libm-test-support-float.c: Likewise.
* math/libm-test-support-ldouble.c: Likewise.
* math/libm-test-driver.c: Remove main comment and header
includes. Include libm-test-support.h.
[!_GNU_SOURCE] (_GNU_SOURCE): Do not define.
(flag_test_errno): Remove static.
(flag_test_exceptions): Likewise.
(flag_test_finite): Likewise.
(flag_test_inline): Likewise.
(flag_test_mathvec): Likewise.
(test_msg): Likewise.
(NO_EXCEPTION): Remove.
(INVALID_EXCEPTION): Likewise.
(DIVIDE_BY_ZERO_EXCEPTION): Likewise.
(OVERFLOW_EXCEPTION): Likewise.
(UNDERFLOW_EXCEPTION): Likewise.
(INEXACT_EXCEPTION): Likewise.
(INVALID_EXCEPTION_OK): Likewise.
(DIVIDE_BY_ZERO_EXCEPTION_OK): Likewise.
(OVERFLOW_EXCEPTION_OK): Likewise.
(UNDERFLOW_EXCEPTION_OK): Likewise.
(NO_INEXACT_EXCEPTION): Likewise.
(EXCEPTIONS_OK): Likewise.
(IGNORE_ZERO_INF_SIGN): Likewise.
(TEST_NAN_SIGN): Likewise.
(TEST_NAN_PAYLOAD): Likewise.
(NO_TEST_INLINE): Likewise.
(XFAIL_TEST): Likewise.
(ERRNO_UNCHANGED): Likewise.
(ERRNO_EDOM): Likewise.
(ERRNO_ERANGE): Likewise.
(IGNORE_RESULT): Likewise.
(NON_FINITE): Likewise.
(TEST_SNAN): Likewise.
(NO_TEST_MATHVEC): Likewise.
(__CONCATX): Likewise.
(TYPE_MIN): Likewise.
(TYPE_TRUE_MIN): Likewise.
(TYPE_MAX): Likewise.
(MIN_EXP): Likewise.
(MAX_EXP): Likewise.
(MANT_DIG): Likewise.
(FSTR_MAX): Likewise.
(ulp_idx): Likewise.
(qtype_str): Remove static.
(TEST_COND_binary32): Remove.
(TEST_COND_binary64): Likewise.
(TEST_COND_binary128): Likewise.
(TEST_COND_ibm128): Likewise.
(TEST_COND_intel96): Likewise.
(TEST_COND_m68k96): Likewise.
(TEST_COND_ibm128_libgcc): Likewise.
(XFAIL_IBM128_LIBGCC): Likewise.
(PAYLOAD_DIG): Likewise.
(UNDERFLOW_EXCEPTION_FLOAT): Likewise.
(UNDERFLOW_EXCEPTION_OK_FLOAT): Likewise.
(UNDERFLOW_EXCEPTION_DOUBLE): Likewise.
(UNDERFLOW_EXCEPTION_OK_DOUBLE): Likewise.
(UNDERFLOW_EXCEPTION_LDOUBLE_IBM): Likewise.
(UNDERFLOW_EXCEPTION_BEFORE_ROUNDING): Likewise.
(TEST_COND_long32): Likewise.
(TEST_COND_long64): Likewise.
(TEST_COND_before_rounding): Likewise.
(TEST_COND_after_rounding): Likewise.
(ulps_file_name): Likewise.
(ulps_file): Likewise.
(output_ulps): Likewise.
(output_dir): Likewise.
(noErrors): Likewise.
(noTests): Likewise.
(noExcTests): Likewise.
(noErrnoTests): Likewise.
(verbose): Likewise.
(output_max_error): Likewise.
(output_points): Likewise.
(ignore_max_ulp): Likewise.
(max_error): Likewise.
(real_max_error): Likewise.
(imag_max_error): Likewise.
(prev_max_error): Likewise.
(prev_real_max_error): Likewise.
(prev_imag_max_error): Likewise.
(max_valid_error): Likewise.
(TYPE_DECIMAL_DIG): Likewise.
(TYPE_HEX_DIG): Likewise.
(fmt_ftostr): Likewise.
(compare_ulp_data): Likewise.
(find_ulps): Likewise.
(init_max_error): Likewise.
(set_max_error): Likewise.
(print_float): Likewise.
(print_screen): Likewise.
(print_screen_max_error): Likewise.
(update_stats): Likewise.
(print_function_ulps): Likewise.
(print_complex_function_ulps): Likewise.
(fpstack_test): Likewise.
(print_max_error): Likewise.
(print_complex_max_error): Likewise.
(test_single_exception): Likewise.
(test_exceptions): Likewise.
(test_single_errno): Likewise.
(test_errno): Likewise.
(ULPDIFF): Likewise.
(ulp): Likewise.
(check_float_internal): Likewise.
(check_float): Likewise.
(check_complex): Likewise.
(check_int): Likewise.
(check_long): Likewise.
(check_bool): Likewise.
(check_longlong): Likewise.
(check_intmax_t): Likewise.
(check_uintmax_t): Likewise.
(enable_test): Likewise.
(matherr): Likewise.
(initialize): Likewise.
(options): Likewise.
(doc): Remove static.
(argp): Likewise.
(parse_opt): Remove.
(check_ulp): Likewise.
(libm_test_init): Likewise.
(libm_test_finish): Likewise.
* math/Makefile (libm-test-support): New variable.
(test-extras): Add libm-test-support files.
(extra-test-objs): Likewise.
(CFLAGS-libm-test-support-float.c): New variable.
(CFLAGS-libm-test-support-double.c): Likewise.
(CFLAGS-libm-test-support-ldouble.c): Likewise.
($(addprefix $(objpfx),$(libm-tests)): Depend on appropriate
libm-test-support objects.
2017-02-08 21:11:49 +00:00
|
|
|
reasonable values for a reasonable range of input values. The
|
|
|
|
result is not necessarily correct for all values and exceptions are
|
|
|
|
not correctly raised in all cases. Problematic input and return
|
|
|
|
values are infinity, not-a-number and minus zero. This suite
|
|
|
|
therefore does not check these specific inputs and the exception
|
|
|
|
handling for inlined mathematical functions - just the "reasonable"
|
|
|
|
values are checked.
|
|
|
|
|
|
|
|
Beware: The tests might fail for any of the following reasons:
|
|
|
|
- Tests are wrong
|
|
|
|
- Functions are wrong
|
|
|
|
- Floating Point Unit not working properly
|
|
|
|
- Compiler has errors
|
|
|
|
|
|
|
|
With e.g. gcc 2.7.2.2 the test for cexp fails because of a compiler error.
|
|
|
|
|
|
|
|
|
|
|
|
To Do: All parameter should be numbers that can be represented as
|
|
|
|
exact floating point values. Currently some values cannot be
|
|
|
|
represented exactly and therefore the result is not the expected
|
|
|
|
result. For this we will use 36 digits so that numbers can be
|
|
|
|
represented exactly. */
|
|
|
|
|
|
|
|
#include "libm-test-support.h"
|
|
|
|
|
|
|
|
#include <argp.h>
|
|
|
|
#include <errno.h>
|
|
|
|
#include <string.h>
|
|
|
|
|
|
|
|
/* This header defines func_ulps, func_real_ulps and func_imag_ulps
|
|
|
|
arrays. */
|
|
|
|
#include "libm-test-ulps.h"
|
|
|
|
|
|
|
|
/* Maximum character buffer to store a stringitized FLOAT value. */
|
|
|
|
#define FSTR_MAX (128)
|
|
|
|
|
|
|
|
#define ulps_file_name "ULPs" /* Name of the ULPs file. */
|
|
|
|
static FILE *ulps_file; /* File to document difference. */
|
|
|
|
static int output_ulps; /* Should ulps printed? */
|
|
|
|
static char *output_dir; /* Directory where generated files will be written. */
|
|
|
|
|
|
|
|
static int noErrors; /* number of errors */
|
|
|
|
static int noTests; /* number of tests (without testing exceptions) */
|
|
|
|
static int noExcTests; /* number of tests for exception flags */
|
|
|
|
static int noErrnoTests;/* number of tests for errno values */
|
|
|
|
|
|
|
|
static int verbose;
|
|
|
|
static int output_max_error; /* Should the maximal errors printed? */
|
|
|
|
static int output_points; /* Should the single function results printed? */
|
|
|
|
static int ignore_max_ulp; /* Should we ignore max_ulp? */
|
Add test infrastructure for narrowing libm functions.
This patch continues preparations for adding TS 18661-1 narrowing libm
functions by adding the required testsuite infrastructure to test such
functions through the libm-test infrastructure.
That infrastructure is based around testing for a single type, FLOAT.
For the narrowing functions, FLOAT, the "main" type for testing, is
the function return type; the argument type is ARG_FLOAT. This is
consistent with how the code built once for each type,
libm-test-support.c, depends on FLOAT for such things as calculating
ulps errors in results but can already handle different argument types
(pointers, integers, long double for nexttoward).
Makefile machinery is added to handle building tests for all pairs of
types for which there are narrowing functions (as with non-narrowing
functions, aliases are tested just the same as the functions they
alias). gen-auto-libm-tests gains a --narrow option for building
outputs for narrowing functions (so narrowing sqrt and fma will share
the same inputs as non-narrowing, but gen-auto-libm-tests will be run
with and without that option to generate different output files). In
the narrowing case, the auto-libm-test-out-narrow-* files include
annotations for each test about what properties ARG_FLOAT must have to
be able to represent all the inputs for that test; those annotations
result in calls to the TEST_COND_arg_fmt macro.
gen-libm-test.pl has some minor updates to handle narrowing tests (for
example, arguments in such tests must be surrounded by ARG_LIT calls
instead of LIT calls). Various new macros are added to the C test
support code (for example, sNaN initializers need to be properly
typed, so arg_snan_value is added; other such arg_* macros are added
as it seems cleanest to do so, though some are not strictly required).
Special-casing of the ibm128 format to allow for its limitations is
adjusted to handle it as the argument format as well as as the result
format; thus, the tests of the new functions allow nonzero ulps only
in the case where ibm128 is the argument format, as otherwise the
functions correspond to fully-defined IEEE operations. The ulps in
question appear as e.g. 'Function: "add_ldouble"' in libm-test-ulps
(with 1ulp errors then listed for double and float for that function
in powerpc); no support is added to generate corresponding faddl /
daddl ulps listings in the ulps table in the manual.
For the previous patch, I noted the need to avoid spurious macro
expansions of identifiers such as "add". A test test-narrow-macros.c
is added to verify such macro expansions are successfully avoided, and
there is also a -mlong-double-64 version of that test for ldbl-opt.
This test is set up to cover the full set of relevant identifiers from
the start rather than adding functions one at a time as each function
group is added.
Tested for x86_64 (this patch in isolation, as well as testing for
various configurations in conjunction with the actual addition of
"add" functions).
* math/Makefile (test-type-pairs): New variable.
(test-type-pairs-f64xf128-yes): Likewise.
(tests): Add test-narrow-macros.
(libm-test-funcs-narrow): New variable.
(libm-test-c-narrow): Likewise.
(generated): Add $(libm-test-c-narrow).
(libm-tests-base-narrow): New variable.
(libm-tests-narrow): Likewise.
(libm-tests): Add $(libm-tests-narrow).
(libm-tests-for-type): Handle $(libm-tests-narrow).
(libm-test-c-narrow-obj): New variable.
($(libm-test-c-narrow-obj)): New rule.
($(foreach t,$(libm-tests-narrow),$(objpfx)$(t).c)): Likewise.
($(foreach f,$(libm-test-funcs-narrow),$(objpfx)$(o)-$(f).o)): Use
$(o-iterator) to set dependencies and CFLAGS.
* math/gen-auto-libm-tests.c: Document use for narrowing
functions.
(output_for_one_input_case): Take argument NARROW.
(generate_output): Likewise. Update call to
output_for_one_input_case.
(main): Take --narrow option. Update call to generate_output.
* math/gen-libm-test.pl (_apply_lit): Take macro name as argument.
(apply_lit): Update call to _apply_lit.
(apply_arglit): New function.
(parse_args): Handle "a" arguments.
(parse_auto_input): Handle format names using ":".
* math/README.libm-test: Document "a" parameter type.
* math/libm-test-support.h (ARG_TYPE_MIN): New macro.
(ARG_TYPE_TRUE_MIN): Likewise.
(ARG_TYPE_MAX): Likwise.
(ARG_MIN_EXP): Likewise.
(ARG_MAX_EXP): Likewise.
(ARG_MANT_DIG): Likewise.
(TEST_COND_arg_ibm128): Likewise.
(TEST_COND_ibm128_libgcc): Define conditional on [ARG_FLOAT].
(TEST_COND_arg_fmt): New macro.
(init_max_error): Update prototype.
* math/libm-test-support.c (test_ibm128): New variable.
(init_max_error): Take argument testing_ibm128 and set test_ibm128
instead of using [TEST_COND_ibm128] conditional.
(test_exceptions): Use test_ibm128 instead of TEST_COND_ibm128.
* math/libm-test-driver.c (STR_ARG_FLOAT): New macro.
[TEST_NARROW] (TEST_MSG): New definition.
(arg_plus_zero): New macro.
(arg_minus_zero): Likewise.
(arg_plus_infty): Likewise.
(arg_minus_infty): Likewise.
(arg_qnan_value_pl): Likewise.
(arg_qnan_value): Likewise.
(arg_snan_value_pl): Likewise.
(arg_snan_value): Likewise.
(arg_max_value): Likewise.
(arg_min_value): Likewise.
(arg_min_subnorm_value): Likewise.
[ARG_FLOAT] (struct test_aa_f_data): New struct type.
(RUN_TEST_LOOP_aa_f): New macro.
(TEST_SUFF): New macro.
(TEST_SUFF_STR): Likewise.
[!TEST_MATHVEC] (VEC_SUFF): Don't define.
(TEST_COND_any_ibm128): New macro.
(START): Use TEST_SUFF and TEST_SUFF_STR in initializer for
this_func. Update call to init_max_error.
* math/test-double.h (FUNC_NARROW_PREFIX): New macro.
* math/test-float.h (FUNC_NARROW_PREFIX): Likewise.
* math/test-float128.h (FUNC_NARROW_PREFIX): Likewise.
* math/test-float32.h (FUNC_NARROW_PREFIX): Likewise.
* math/test-float32x.h (FUNC_NARROW_PREFIX): Likewise.
* math/test-float64.h (FUNC_NARROW_PREFIX): Likewise.
* math/test-float64x.h (FUNC_NARROW_PREFIX): Likewise.
* math/test-math-scalar.h (TEST_NARROW): Likewise.
* math/test-math-vector.h (TEST_NARROW): Likewise.
* math/test-arg-double.h: New file.
* math/test-arg-float128.h: Likewise.
* math/test-arg-float32x.h: Likewise.
* math/test-arg-float64.h: Likewise.
* math/test-arg-float64x.h: Likewise.
* math/test-arg-ldouble.h: Likewise.
* math/test-math-narrow.h: Likewise.
* math/test-narrow-macros.c: Likewise.
* sysdeps/ieee754/ldbl-opt/test-narrow-macros-ldbl-64.c: Likewise.
* sysdeps/ieee754/ldbl-opt/Makefile (tests): Add
test-narrow-macros-ldbl-64.
(CFLAGS-test-narrow-macros-ldbl-64.c): New variable.
2018-02-09 21:55:48 +00:00
|
|
|
static int test_ibm128; /* Is argument or result IBM long double? */
|
Build most libm-test support code once per type.
libm-test-driver.c contains various functions used in the course of
libm testing, which are built as part of each test using this
machinery.
Currently, these functions get built for three tests for each type
(e.g. test-float, test-ifloat, test-float-finite), plus the vector
function tests. All these tests are huge and thus slow to build; the
output of gen-libm-test.pl totals around 40 MB across all functions.
To make the individual tests built from the Makefile smaller, it makes
sense to split these tests up so the tests for each function are built
separately (thus, three tests for each (function, type) pair, plus
vector tests built only for functions that actually have vector
versions). This improves parallelism and means that if tests fail,
the summary of failed tests makes it more obvious where the problem
might be without needing to look in the .out files to see which
functions' tests failed (though architecture maintainers still need to
keep libm-test-ulps up to date to avoid spurious failures of little
interest).
Simply including libm-test-driver.c as-is in such individual-function
tests does not work because of unused static check_* functions (those
functions only being used for the types of the outputs of the function
under test). It also means the common code gets built over 1000 times
instead of nine (plus vector tests). To avoid that issue, this patch
splits out the bulk of the libm-test-driver.c code into a separate
file libm-test-support.c (with a few functions made non-static). That
separate file is built only once for each floating-point type (so at
present three times, or twice on architectures with long double =
double). Definitions needed in both libm-test-support.c and
libm-test-driver.c go in libm-test-support.h (it's possible some of
those are in fact only needed in one of the two files).
libm-test-driver.c keeps definitions of a limited number of variables
used to configure how libm-test-support.c behaves, various macros and
structures needed by individual-function tests, and the main function.
This move is also consistent in spirit with the move away from
test-skeleton.c having all the test support code, to a small
support/test-driver.c included in individual tests with most of the
code built separately.
Tested for x86_64 and x86.
* math/libm-test-support.c: New file. Content from
math/libm-test-driver.c.
* math/libm-test-support.h: Likewise.
* math/libm-test-support-double.c: New file.
* math/libm-test-support-float.c: Likewise.
* math/libm-test-support-ldouble.c: Likewise.
* math/libm-test-driver.c: Remove main comment and header
includes. Include libm-test-support.h.
[!_GNU_SOURCE] (_GNU_SOURCE): Do not define.
(flag_test_errno): Remove static.
(flag_test_exceptions): Likewise.
(flag_test_finite): Likewise.
(flag_test_inline): Likewise.
(flag_test_mathvec): Likewise.
(test_msg): Likewise.
(NO_EXCEPTION): Remove.
(INVALID_EXCEPTION): Likewise.
(DIVIDE_BY_ZERO_EXCEPTION): Likewise.
(OVERFLOW_EXCEPTION): Likewise.
(UNDERFLOW_EXCEPTION): Likewise.
(INEXACT_EXCEPTION): Likewise.
(INVALID_EXCEPTION_OK): Likewise.
(DIVIDE_BY_ZERO_EXCEPTION_OK): Likewise.
(OVERFLOW_EXCEPTION_OK): Likewise.
(UNDERFLOW_EXCEPTION_OK): Likewise.
(NO_INEXACT_EXCEPTION): Likewise.
(EXCEPTIONS_OK): Likewise.
(IGNORE_ZERO_INF_SIGN): Likewise.
(TEST_NAN_SIGN): Likewise.
(TEST_NAN_PAYLOAD): Likewise.
(NO_TEST_INLINE): Likewise.
(XFAIL_TEST): Likewise.
(ERRNO_UNCHANGED): Likewise.
(ERRNO_EDOM): Likewise.
(ERRNO_ERANGE): Likewise.
(IGNORE_RESULT): Likewise.
(NON_FINITE): Likewise.
(TEST_SNAN): Likewise.
(NO_TEST_MATHVEC): Likewise.
(__CONCATX): Likewise.
(TYPE_MIN): Likewise.
(TYPE_TRUE_MIN): Likewise.
(TYPE_MAX): Likewise.
(MIN_EXP): Likewise.
(MAX_EXP): Likewise.
(MANT_DIG): Likewise.
(FSTR_MAX): Likewise.
(ulp_idx): Likewise.
(qtype_str): Remove static.
(TEST_COND_binary32): Remove.
(TEST_COND_binary64): Likewise.
(TEST_COND_binary128): Likewise.
(TEST_COND_ibm128): Likewise.
(TEST_COND_intel96): Likewise.
(TEST_COND_m68k96): Likewise.
(TEST_COND_ibm128_libgcc): Likewise.
(XFAIL_IBM128_LIBGCC): Likewise.
(PAYLOAD_DIG): Likewise.
(UNDERFLOW_EXCEPTION_FLOAT): Likewise.
(UNDERFLOW_EXCEPTION_OK_FLOAT): Likewise.
(UNDERFLOW_EXCEPTION_DOUBLE): Likewise.
(UNDERFLOW_EXCEPTION_OK_DOUBLE): Likewise.
(UNDERFLOW_EXCEPTION_LDOUBLE_IBM): Likewise.
(UNDERFLOW_EXCEPTION_BEFORE_ROUNDING): Likewise.
(TEST_COND_long32): Likewise.
(TEST_COND_long64): Likewise.
(TEST_COND_before_rounding): Likewise.
(TEST_COND_after_rounding): Likewise.
(ulps_file_name): Likewise.
(ulps_file): Likewise.
(output_ulps): Likewise.
(output_dir): Likewise.
(noErrors): Likewise.
(noTests): Likewise.
(noExcTests): Likewise.
(noErrnoTests): Likewise.
(verbose): Likewise.
(output_max_error): Likewise.
(output_points): Likewise.
(ignore_max_ulp): Likewise.
(max_error): Likewise.
(real_max_error): Likewise.
(imag_max_error): Likewise.
(prev_max_error): Likewise.
(prev_real_max_error): Likewise.
(prev_imag_max_error): Likewise.
(max_valid_error): Likewise.
(TYPE_DECIMAL_DIG): Likewise.
(TYPE_HEX_DIG): Likewise.
(fmt_ftostr): Likewise.
(compare_ulp_data): Likewise.
(find_ulps): Likewise.
(init_max_error): Likewise.
(set_max_error): Likewise.
(print_float): Likewise.
(print_screen): Likewise.
(print_screen_max_error): Likewise.
(update_stats): Likewise.
(print_function_ulps): Likewise.
(print_complex_function_ulps): Likewise.
(fpstack_test): Likewise.
(print_max_error): Likewise.
(print_complex_max_error): Likewise.
(test_single_exception): Likewise.
(test_exceptions): Likewise.
(test_single_errno): Likewise.
(test_errno): Likewise.
(ULPDIFF): Likewise.
(ulp): Likewise.
(check_float_internal): Likewise.
(check_float): Likewise.
(check_complex): Likewise.
(check_int): Likewise.
(check_long): Likewise.
(check_bool): Likewise.
(check_longlong): Likewise.
(check_intmax_t): Likewise.
(check_uintmax_t): Likewise.
(enable_test): Likewise.
(matherr): Likewise.
(initialize): Likewise.
(options): Likewise.
(doc): Remove static.
(argp): Likewise.
(parse_opt): Remove.
(check_ulp): Likewise.
(libm_test_init): Likewise.
(libm_test_finish): Likewise.
* math/Makefile (libm-test-support): New variable.
(test-extras): Add libm-test-support files.
(extra-test-objs): Likewise.
(CFLAGS-libm-test-support-float.c): New variable.
(CFLAGS-libm-test-support-double.c): Likewise.
(CFLAGS-libm-test-support-ldouble.c): Likewise.
($(addprefix $(objpfx),$(libm-tests)): Depend on appropriate
libm-test-support objects.
2017-02-08 21:11:49 +00:00
|
|
|
|
|
|
|
static FLOAT max_error, real_max_error, imag_max_error;
|
|
|
|
|
|
|
|
static FLOAT prev_max_error, prev_real_max_error, prev_imag_max_error;
|
|
|
|
|
|
|
|
static FLOAT max_valid_error;
|
|
|
|
|
|
|
|
/* Sufficient numbers of digits to represent any floating-point value
|
|
|
|
unambiguously (for any choice of the number of bits in the first
|
|
|
|
hex digit, in the case of TYPE_HEX_DIG). When used with printf
|
|
|
|
formats where the precision counts only digits after the point, 1
|
|
|
|
is subtracted from these values. */
|
|
|
|
#define TYPE_DECIMAL_DIG __CONCATX (PREFIX, _DECIMAL_DIG)
|
|
|
|
#define TYPE_HEX_DIG ((MANT_DIG + 6) / 4)
|
|
|
|
|
|
|
|
/* Converts VALUE (a floating-point number) to string and writes it to DEST.
|
|
|
|
PRECISION specifies the number of fractional digits that should be printed.
|
|
|
|
CONVERSION is the conversion specifier, such as in printf, e.g. 'f' or 'a'.
|
|
|
|
The output is prepended with an empty space if VALUE is non-negative. */
|
|
|
|
static void
|
|
|
|
fmt_ftostr (char *dest, size_t size, int precision, const char *conversion,
|
|
|
|
FLOAT value)
|
|
|
|
{
|
|
|
|
char format[64];
|
|
|
|
char *ptr_format;
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
/* Generate the format string. */
|
|
|
|
ptr_format = stpcpy (format, "%.");
|
|
|
|
ret = sprintf (ptr_format, "%d", precision);
|
|
|
|
ptr_format += ret;
|
|
|
|
ptr_format = stpcpy (ptr_format, conversion);
|
|
|
|
|
|
|
|
/* Add a space to the beginning of the output string, if the floating-point
|
|
|
|
number is non-negative. This mimics the behavior of the space (' ') flag
|
|
|
|
in snprintf, which is not available on strfrom. */
|
|
|
|
if (! signbit (value))
|
|
|
|
{
|
|
|
|
*dest = ' ';
|
|
|
|
dest++;
|
|
|
|
size--;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Call the float to string conversion function, e.g.: strfromd. */
|
|
|
|
FTOSTR (dest, size, format, value);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Compare KEY (a string, with the name of a function) with ULP (a
|
|
|
|
pointer to a struct ulp_data structure), returning a value less
|
|
|
|
than, equal to or greater than zero for use in bsearch. */
|
|
|
|
|
|
|
|
static int
|
|
|
|
compare_ulp_data (const void *key, const void *ulp)
|
|
|
|
{
|
|
|
|
const char *keystr = key;
|
|
|
|
const struct ulp_data *ulpdat = ulp;
|
|
|
|
return strcmp (keystr, ulpdat->name);
|
|
|
|
}
|
|
|
|
|
2017-10-11 17:46:19 +00:00
|
|
|
static const int ulp_idx = ULP_IDX;
|
Build most libm-test support code once per type.
libm-test-driver.c contains various functions used in the course of
libm testing, which are built as part of each test using this
machinery.
Currently, these functions get built for three tests for each type
(e.g. test-float, test-ifloat, test-float-finite), plus the vector
function tests. All these tests are huge and thus slow to build; the
output of gen-libm-test.pl totals around 40 MB across all functions.
To make the individual tests built from the Makefile smaller, it makes
sense to split these tests up so the tests for each function are built
separately (thus, three tests for each (function, type) pair, plus
vector tests built only for functions that actually have vector
versions). This improves parallelism and means that if tests fail,
the summary of failed tests makes it more obvious where the problem
might be without needing to look in the .out files to see which
functions' tests failed (though architecture maintainers still need to
keep libm-test-ulps up to date to avoid spurious failures of little
interest).
Simply including libm-test-driver.c as-is in such individual-function
tests does not work because of unused static check_* functions (those
functions only being used for the types of the outputs of the function
under test). It also means the common code gets built over 1000 times
instead of nine (plus vector tests). To avoid that issue, this patch
splits out the bulk of the libm-test-driver.c code into a separate
file libm-test-support.c (with a few functions made non-static). That
separate file is built only once for each floating-point type (so at
present three times, or twice on architectures with long double =
double). Definitions needed in both libm-test-support.c and
libm-test-driver.c go in libm-test-support.h (it's possible some of
those are in fact only needed in one of the two files).
libm-test-driver.c keeps definitions of a limited number of variables
used to configure how libm-test-support.c behaves, various macros and
structures needed by individual-function tests, and the main function.
This move is also consistent in spirit with the move away from
test-skeleton.c having all the test support code, to a small
support/test-driver.c included in individual tests with most of the
code built separately.
Tested for x86_64 and x86.
* math/libm-test-support.c: New file. Content from
math/libm-test-driver.c.
* math/libm-test-support.h: Likewise.
* math/libm-test-support-double.c: New file.
* math/libm-test-support-float.c: Likewise.
* math/libm-test-support-ldouble.c: Likewise.
* math/libm-test-driver.c: Remove main comment and header
includes. Include libm-test-support.h.
[!_GNU_SOURCE] (_GNU_SOURCE): Do not define.
(flag_test_errno): Remove static.
(flag_test_exceptions): Likewise.
(flag_test_finite): Likewise.
(flag_test_inline): Likewise.
(flag_test_mathvec): Likewise.
(test_msg): Likewise.
(NO_EXCEPTION): Remove.
(INVALID_EXCEPTION): Likewise.
(DIVIDE_BY_ZERO_EXCEPTION): Likewise.
(OVERFLOW_EXCEPTION): Likewise.
(UNDERFLOW_EXCEPTION): Likewise.
(INEXACT_EXCEPTION): Likewise.
(INVALID_EXCEPTION_OK): Likewise.
(DIVIDE_BY_ZERO_EXCEPTION_OK): Likewise.
(OVERFLOW_EXCEPTION_OK): Likewise.
(UNDERFLOW_EXCEPTION_OK): Likewise.
(NO_INEXACT_EXCEPTION): Likewise.
(EXCEPTIONS_OK): Likewise.
(IGNORE_ZERO_INF_SIGN): Likewise.
(TEST_NAN_SIGN): Likewise.
(TEST_NAN_PAYLOAD): Likewise.
(NO_TEST_INLINE): Likewise.
(XFAIL_TEST): Likewise.
(ERRNO_UNCHANGED): Likewise.
(ERRNO_EDOM): Likewise.
(ERRNO_ERANGE): Likewise.
(IGNORE_RESULT): Likewise.
(NON_FINITE): Likewise.
(TEST_SNAN): Likewise.
(NO_TEST_MATHVEC): Likewise.
(__CONCATX): Likewise.
(TYPE_MIN): Likewise.
(TYPE_TRUE_MIN): Likewise.
(TYPE_MAX): Likewise.
(MIN_EXP): Likewise.
(MAX_EXP): Likewise.
(MANT_DIG): Likewise.
(FSTR_MAX): Likewise.
(ulp_idx): Likewise.
(qtype_str): Remove static.
(TEST_COND_binary32): Remove.
(TEST_COND_binary64): Likewise.
(TEST_COND_binary128): Likewise.
(TEST_COND_ibm128): Likewise.
(TEST_COND_intel96): Likewise.
(TEST_COND_m68k96): Likewise.
(TEST_COND_ibm128_libgcc): Likewise.
(XFAIL_IBM128_LIBGCC): Likewise.
(PAYLOAD_DIG): Likewise.
(UNDERFLOW_EXCEPTION_FLOAT): Likewise.
(UNDERFLOW_EXCEPTION_OK_FLOAT): Likewise.
(UNDERFLOW_EXCEPTION_DOUBLE): Likewise.
(UNDERFLOW_EXCEPTION_OK_DOUBLE): Likewise.
(UNDERFLOW_EXCEPTION_LDOUBLE_IBM): Likewise.
(UNDERFLOW_EXCEPTION_BEFORE_ROUNDING): Likewise.
(TEST_COND_long32): Likewise.
(TEST_COND_long64): Likewise.
(TEST_COND_before_rounding): Likewise.
(TEST_COND_after_rounding): Likewise.
(ulps_file_name): Likewise.
(ulps_file): Likewise.
(output_ulps): Likewise.
(output_dir): Likewise.
(noErrors): Likewise.
(noTests): Likewise.
(noExcTests): Likewise.
(noErrnoTests): Likewise.
(verbose): Likewise.
(output_max_error): Likewise.
(output_points): Likewise.
(ignore_max_ulp): Likewise.
(max_error): Likewise.
(real_max_error): Likewise.
(imag_max_error): Likewise.
(prev_max_error): Likewise.
(prev_real_max_error): Likewise.
(prev_imag_max_error): Likewise.
(max_valid_error): Likewise.
(TYPE_DECIMAL_DIG): Likewise.
(TYPE_HEX_DIG): Likewise.
(fmt_ftostr): Likewise.
(compare_ulp_data): Likewise.
(find_ulps): Likewise.
(init_max_error): Likewise.
(set_max_error): Likewise.
(print_float): Likewise.
(print_screen): Likewise.
(print_screen_max_error): Likewise.
(update_stats): Likewise.
(print_function_ulps): Likewise.
(print_complex_function_ulps): Likewise.
(fpstack_test): Likewise.
(print_max_error): Likewise.
(print_complex_max_error): Likewise.
(test_single_exception): Likewise.
(test_exceptions): Likewise.
(test_single_errno): Likewise.
(test_errno): Likewise.
(ULPDIFF): Likewise.
(ulp): Likewise.
(check_float_internal): Likewise.
(check_float): Likewise.
(check_complex): Likewise.
(check_int): Likewise.
(check_long): Likewise.
(check_bool): Likewise.
(check_longlong): Likewise.
(check_intmax_t): Likewise.
(check_uintmax_t): Likewise.
(enable_test): Likewise.
(matherr): Likewise.
(initialize): Likewise.
(options): Likewise.
(doc): Remove static.
(argp): Likewise.
(parse_opt): Remove.
(check_ulp): Likewise.
(libm_test_init): Likewise.
(libm_test_finish): Likewise.
* math/Makefile (libm-test-support): New variable.
(test-extras): Add libm-test-support files.
(extra-test-objs): Likewise.
(CFLAGS-libm-test-support-float.c): New variable.
(CFLAGS-libm-test-support-double.c): Likewise.
(CFLAGS-libm-test-support-ldouble.c): Likewise.
($(addprefix $(objpfx),$(libm-tests)): Depend on appropriate
libm-test-support objects.
2017-02-08 21:11:49 +00:00
|
|
|
|
|
|
|
/* Return the ulps for NAME in array DATA with NMEMB elements, or 0 if
|
|
|
|
no ulps listed. */
|
|
|
|
|
|
|
|
static FLOAT
|
|
|
|
find_ulps (const char *name, const struct ulp_data *data, size_t nmemb)
|
|
|
|
{
|
|
|
|
const struct ulp_data *entry = bsearch (name, data, nmemb, sizeof (*data),
|
|
|
|
compare_ulp_data);
|
|
|
|
if (entry == NULL)
|
|
|
|
return 0;
|
|
|
|
else
|
2020-03-17 18:46:29 +00:00
|
|
|
return entry->max_ulp[ulp_idx];
|
Build most libm-test support code once per type.
libm-test-driver.c contains various functions used in the course of
libm testing, which are built as part of each test using this
machinery.
Currently, these functions get built for three tests for each type
(e.g. test-float, test-ifloat, test-float-finite), plus the vector
function tests. All these tests are huge and thus slow to build; the
output of gen-libm-test.pl totals around 40 MB across all functions.
To make the individual tests built from the Makefile smaller, it makes
sense to split these tests up so the tests for each function are built
separately (thus, three tests for each (function, type) pair, plus
vector tests built only for functions that actually have vector
versions). This improves parallelism and means that if tests fail,
the summary of failed tests makes it more obvious where the problem
might be without needing to look in the .out files to see which
functions' tests failed (though architecture maintainers still need to
keep libm-test-ulps up to date to avoid spurious failures of little
interest).
Simply including libm-test-driver.c as-is in such individual-function
tests does not work because of unused static check_* functions (those
functions only being used for the types of the outputs of the function
under test). It also means the common code gets built over 1000 times
instead of nine (plus vector tests). To avoid that issue, this patch
splits out the bulk of the libm-test-driver.c code into a separate
file libm-test-support.c (with a few functions made non-static). That
separate file is built only once for each floating-point type (so at
present three times, or twice on architectures with long double =
double). Definitions needed in both libm-test-support.c and
libm-test-driver.c go in libm-test-support.h (it's possible some of
those are in fact only needed in one of the two files).
libm-test-driver.c keeps definitions of a limited number of variables
used to configure how libm-test-support.c behaves, various macros and
structures needed by individual-function tests, and the main function.
This move is also consistent in spirit with the move away from
test-skeleton.c having all the test support code, to a small
support/test-driver.c included in individual tests with most of the
code built separately.
Tested for x86_64 and x86.
* math/libm-test-support.c: New file. Content from
math/libm-test-driver.c.
* math/libm-test-support.h: Likewise.
* math/libm-test-support-double.c: New file.
* math/libm-test-support-float.c: Likewise.
* math/libm-test-support-ldouble.c: Likewise.
* math/libm-test-driver.c: Remove main comment and header
includes. Include libm-test-support.h.
[!_GNU_SOURCE] (_GNU_SOURCE): Do not define.
(flag_test_errno): Remove static.
(flag_test_exceptions): Likewise.
(flag_test_finite): Likewise.
(flag_test_inline): Likewise.
(flag_test_mathvec): Likewise.
(test_msg): Likewise.
(NO_EXCEPTION): Remove.
(INVALID_EXCEPTION): Likewise.
(DIVIDE_BY_ZERO_EXCEPTION): Likewise.
(OVERFLOW_EXCEPTION): Likewise.
(UNDERFLOW_EXCEPTION): Likewise.
(INEXACT_EXCEPTION): Likewise.
(INVALID_EXCEPTION_OK): Likewise.
(DIVIDE_BY_ZERO_EXCEPTION_OK): Likewise.
(OVERFLOW_EXCEPTION_OK): Likewise.
(UNDERFLOW_EXCEPTION_OK): Likewise.
(NO_INEXACT_EXCEPTION): Likewise.
(EXCEPTIONS_OK): Likewise.
(IGNORE_ZERO_INF_SIGN): Likewise.
(TEST_NAN_SIGN): Likewise.
(TEST_NAN_PAYLOAD): Likewise.
(NO_TEST_INLINE): Likewise.
(XFAIL_TEST): Likewise.
(ERRNO_UNCHANGED): Likewise.
(ERRNO_EDOM): Likewise.
(ERRNO_ERANGE): Likewise.
(IGNORE_RESULT): Likewise.
(NON_FINITE): Likewise.
(TEST_SNAN): Likewise.
(NO_TEST_MATHVEC): Likewise.
(__CONCATX): Likewise.
(TYPE_MIN): Likewise.
(TYPE_TRUE_MIN): Likewise.
(TYPE_MAX): Likewise.
(MIN_EXP): Likewise.
(MAX_EXP): Likewise.
(MANT_DIG): Likewise.
(FSTR_MAX): Likewise.
(ulp_idx): Likewise.
(qtype_str): Remove static.
(TEST_COND_binary32): Remove.
(TEST_COND_binary64): Likewise.
(TEST_COND_binary128): Likewise.
(TEST_COND_ibm128): Likewise.
(TEST_COND_intel96): Likewise.
(TEST_COND_m68k96): Likewise.
(TEST_COND_ibm128_libgcc): Likewise.
(XFAIL_IBM128_LIBGCC): Likewise.
(PAYLOAD_DIG): Likewise.
(UNDERFLOW_EXCEPTION_FLOAT): Likewise.
(UNDERFLOW_EXCEPTION_OK_FLOAT): Likewise.
(UNDERFLOW_EXCEPTION_DOUBLE): Likewise.
(UNDERFLOW_EXCEPTION_OK_DOUBLE): Likewise.
(UNDERFLOW_EXCEPTION_LDOUBLE_IBM): Likewise.
(UNDERFLOW_EXCEPTION_BEFORE_ROUNDING): Likewise.
(TEST_COND_long32): Likewise.
(TEST_COND_long64): Likewise.
(TEST_COND_before_rounding): Likewise.
(TEST_COND_after_rounding): Likewise.
(ulps_file_name): Likewise.
(ulps_file): Likewise.
(output_ulps): Likewise.
(output_dir): Likewise.
(noErrors): Likewise.
(noTests): Likewise.
(noExcTests): Likewise.
(noErrnoTests): Likewise.
(verbose): Likewise.
(output_max_error): Likewise.
(output_points): Likewise.
(ignore_max_ulp): Likewise.
(max_error): Likewise.
(real_max_error): Likewise.
(imag_max_error): Likewise.
(prev_max_error): Likewise.
(prev_real_max_error): Likewise.
(prev_imag_max_error): Likewise.
(max_valid_error): Likewise.
(TYPE_DECIMAL_DIG): Likewise.
(TYPE_HEX_DIG): Likewise.
(fmt_ftostr): Likewise.
(compare_ulp_data): Likewise.
(find_ulps): Likewise.
(init_max_error): Likewise.
(set_max_error): Likewise.
(print_float): Likewise.
(print_screen): Likewise.
(print_screen_max_error): Likewise.
(update_stats): Likewise.
(print_function_ulps): Likewise.
(print_complex_function_ulps): Likewise.
(fpstack_test): Likewise.
(print_max_error): Likewise.
(print_complex_max_error): Likewise.
(test_single_exception): Likewise.
(test_exceptions): Likewise.
(test_single_errno): Likewise.
(test_errno): Likewise.
(ULPDIFF): Likewise.
(ulp): Likewise.
(check_float_internal): Likewise.
(check_float): Likewise.
(check_complex): Likewise.
(check_int): Likewise.
(check_long): Likewise.
(check_bool): Likewise.
(check_longlong): Likewise.
(check_intmax_t): Likewise.
(check_uintmax_t): Likewise.
(enable_test): Likewise.
(matherr): Likewise.
(initialize): Likewise.
(options): Likewise.
(doc): Remove static.
(argp): Likewise.
(parse_opt): Remove.
(check_ulp): Likewise.
(libm_test_init): Likewise.
(libm_test_finish): Likewise.
* math/Makefile (libm-test-support): New variable.
(test-extras): Add libm-test-support files.
(extra-test-objs): Likewise.
(CFLAGS-libm-test-support-float.c): New variable.
(CFLAGS-libm-test-support-double.c): Likewise.
(CFLAGS-libm-test-support-ldouble.c): Likewise.
($(addprefix $(objpfx),$(libm-tests)): Depend on appropriate
libm-test-support objects.
2017-02-08 21:11:49 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
void
|
Add test infrastructure for narrowing libm functions.
This patch continues preparations for adding TS 18661-1 narrowing libm
functions by adding the required testsuite infrastructure to test such
functions through the libm-test infrastructure.
That infrastructure is based around testing for a single type, FLOAT.
For the narrowing functions, FLOAT, the "main" type for testing, is
the function return type; the argument type is ARG_FLOAT. This is
consistent with how the code built once for each type,
libm-test-support.c, depends on FLOAT for such things as calculating
ulps errors in results but can already handle different argument types
(pointers, integers, long double for nexttoward).
Makefile machinery is added to handle building tests for all pairs of
types for which there are narrowing functions (as with non-narrowing
functions, aliases are tested just the same as the functions they
alias). gen-auto-libm-tests gains a --narrow option for building
outputs for narrowing functions (so narrowing sqrt and fma will share
the same inputs as non-narrowing, but gen-auto-libm-tests will be run
with and without that option to generate different output files). In
the narrowing case, the auto-libm-test-out-narrow-* files include
annotations for each test about what properties ARG_FLOAT must have to
be able to represent all the inputs for that test; those annotations
result in calls to the TEST_COND_arg_fmt macro.
gen-libm-test.pl has some minor updates to handle narrowing tests (for
example, arguments in such tests must be surrounded by ARG_LIT calls
instead of LIT calls). Various new macros are added to the C test
support code (for example, sNaN initializers need to be properly
typed, so arg_snan_value is added; other such arg_* macros are added
as it seems cleanest to do so, though some are not strictly required).
Special-casing of the ibm128 format to allow for its limitations is
adjusted to handle it as the argument format as well as as the result
format; thus, the tests of the new functions allow nonzero ulps only
in the case where ibm128 is the argument format, as otherwise the
functions correspond to fully-defined IEEE operations. The ulps in
question appear as e.g. 'Function: "add_ldouble"' in libm-test-ulps
(with 1ulp errors then listed for double and float for that function
in powerpc); no support is added to generate corresponding faddl /
daddl ulps listings in the ulps table in the manual.
For the previous patch, I noted the need to avoid spurious macro
expansions of identifiers such as "add". A test test-narrow-macros.c
is added to verify such macro expansions are successfully avoided, and
there is also a -mlong-double-64 version of that test for ldbl-opt.
This test is set up to cover the full set of relevant identifiers from
the start rather than adding functions one at a time as each function
group is added.
Tested for x86_64 (this patch in isolation, as well as testing for
various configurations in conjunction with the actual addition of
"add" functions).
* math/Makefile (test-type-pairs): New variable.
(test-type-pairs-f64xf128-yes): Likewise.
(tests): Add test-narrow-macros.
(libm-test-funcs-narrow): New variable.
(libm-test-c-narrow): Likewise.
(generated): Add $(libm-test-c-narrow).
(libm-tests-base-narrow): New variable.
(libm-tests-narrow): Likewise.
(libm-tests): Add $(libm-tests-narrow).
(libm-tests-for-type): Handle $(libm-tests-narrow).
(libm-test-c-narrow-obj): New variable.
($(libm-test-c-narrow-obj)): New rule.
($(foreach t,$(libm-tests-narrow),$(objpfx)$(t).c)): Likewise.
($(foreach f,$(libm-test-funcs-narrow),$(objpfx)$(o)-$(f).o)): Use
$(o-iterator) to set dependencies and CFLAGS.
* math/gen-auto-libm-tests.c: Document use for narrowing
functions.
(output_for_one_input_case): Take argument NARROW.
(generate_output): Likewise. Update call to
output_for_one_input_case.
(main): Take --narrow option. Update call to generate_output.
* math/gen-libm-test.pl (_apply_lit): Take macro name as argument.
(apply_lit): Update call to _apply_lit.
(apply_arglit): New function.
(parse_args): Handle "a" arguments.
(parse_auto_input): Handle format names using ":".
* math/README.libm-test: Document "a" parameter type.
* math/libm-test-support.h (ARG_TYPE_MIN): New macro.
(ARG_TYPE_TRUE_MIN): Likewise.
(ARG_TYPE_MAX): Likwise.
(ARG_MIN_EXP): Likewise.
(ARG_MAX_EXP): Likewise.
(ARG_MANT_DIG): Likewise.
(TEST_COND_arg_ibm128): Likewise.
(TEST_COND_ibm128_libgcc): Define conditional on [ARG_FLOAT].
(TEST_COND_arg_fmt): New macro.
(init_max_error): Update prototype.
* math/libm-test-support.c (test_ibm128): New variable.
(init_max_error): Take argument testing_ibm128 and set test_ibm128
instead of using [TEST_COND_ibm128] conditional.
(test_exceptions): Use test_ibm128 instead of TEST_COND_ibm128.
* math/libm-test-driver.c (STR_ARG_FLOAT): New macro.
[TEST_NARROW] (TEST_MSG): New definition.
(arg_plus_zero): New macro.
(arg_minus_zero): Likewise.
(arg_plus_infty): Likewise.
(arg_minus_infty): Likewise.
(arg_qnan_value_pl): Likewise.
(arg_qnan_value): Likewise.
(arg_snan_value_pl): Likewise.
(arg_snan_value): Likewise.
(arg_max_value): Likewise.
(arg_min_value): Likewise.
(arg_min_subnorm_value): Likewise.
[ARG_FLOAT] (struct test_aa_f_data): New struct type.
(RUN_TEST_LOOP_aa_f): New macro.
(TEST_SUFF): New macro.
(TEST_SUFF_STR): Likewise.
[!TEST_MATHVEC] (VEC_SUFF): Don't define.
(TEST_COND_any_ibm128): New macro.
(START): Use TEST_SUFF and TEST_SUFF_STR in initializer for
this_func. Update call to init_max_error.
* math/test-double.h (FUNC_NARROW_PREFIX): New macro.
* math/test-float.h (FUNC_NARROW_PREFIX): Likewise.
* math/test-float128.h (FUNC_NARROW_PREFIX): Likewise.
* math/test-float32.h (FUNC_NARROW_PREFIX): Likewise.
* math/test-float32x.h (FUNC_NARROW_PREFIX): Likewise.
* math/test-float64.h (FUNC_NARROW_PREFIX): Likewise.
* math/test-float64x.h (FUNC_NARROW_PREFIX): Likewise.
* math/test-math-scalar.h (TEST_NARROW): Likewise.
* math/test-math-vector.h (TEST_NARROW): Likewise.
* math/test-arg-double.h: New file.
* math/test-arg-float128.h: Likewise.
* math/test-arg-float32x.h: Likewise.
* math/test-arg-float64.h: Likewise.
* math/test-arg-float64x.h: Likewise.
* math/test-arg-ldouble.h: Likewise.
* math/test-math-narrow.h: Likewise.
* math/test-narrow-macros.c: Likewise.
* sysdeps/ieee754/ldbl-opt/test-narrow-macros-ldbl-64.c: Likewise.
* sysdeps/ieee754/ldbl-opt/Makefile (tests): Add
test-narrow-macros-ldbl-64.
(CFLAGS-test-narrow-macros-ldbl-64.c): New variable.
2018-02-09 21:55:48 +00:00
|
|
|
init_max_error (const char *name, int exact, int testing_ibm128)
|
Build most libm-test support code once per type.
libm-test-driver.c contains various functions used in the course of
libm testing, which are built as part of each test using this
machinery.
Currently, these functions get built for three tests for each type
(e.g. test-float, test-ifloat, test-float-finite), plus the vector
function tests. All these tests are huge and thus slow to build; the
output of gen-libm-test.pl totals around 40 MB across all functions.
To make the individual tests built from the Makefile smaller, it makes
sense to split these tests up so the tests for each function are built
separately (thus, three tests for each (function, type) pair, plus
vector tests built only for functions that actually have vector
versions). This improves parallelism and means that if tests fail,
the summary of failed tests makes it more obvious where the problem
might be without needing to look in the .out files to see which
functions' tests failed (though architecture maintainers still need to
keep libm-test-ulps up to date to avoid spurious failures of little
interest).
Simply including libm-test-driver.c as-is in such individual-function
tests does not work because of unused static check_* functions (those
functions only being used for the types of the outputs of the function
under test). It also means the common code gets built over 1000 times
instead of nine (plus vector tests). To avoid that issue, this patch
splits out the bulk of the libm-test-driver.c code into a separate
file libm-test-support.c (with a few functions made non-static). That
separate file is built only once for each floating-point type (so at
present three times, or twice on architectures with long double =
double). Definitions needed in both libm-test-support.c and
libm-test-driver.c go in libm-test-support.h (it's possible some of
those are in fact only needed in one of the two files).
libm-test-driver.c keeps definitions of a limited number of variables
used to configure how libm-test-support.c behaves, various macros and
structures needed by individual-function tests, and the main function.
This move is also consistent in spirit with the move away from
test-skeleton.c having all the test support code, to a small
support/test-driver.c included in individual tests with most of the
code built separately.
Tested for x86_64 and x86.
* math/libm-test-support.c: New file. Content from
math/libm-test-driver.c.
* math/libm-test-support.h: Likewise.
* math/libm-test-support-double.c: New file.
* math/libm-test-support-float.c: Likewise.
* math/libm-test-support-ldouble.c: Likewise.
* math/libm-test-driver.c: Remove main comment and header
includes. Include libm-test-support.h.
[!_GNU_SOURCE] (_GNU_SOURCE): Do not define.
(flag_test_errno): Remove static.
(flag_test_exceptions): Likewise.
(flag_test_finite): Likewise.
(flag_test_inline): Likewise.
(flag_test_mathvec): Likewise.
(test_msg): Likewise.
(NO_EXCEPTION): Remove.
(INVALID_EXCEPTION): Likewise.
(DIVIDE_BY_ZERO_EXCEPTION): Likewise.
(OVERFLOW_EXCEPTION): Likewise.
(UNDERFLOW_EXCEPTION): Likewise.
(INEXACT_EXCEPTION): Likewise.
(INVALID_EXCEPTION_OK): Likewise.
(DIVIDE_BY_ZERO_EXCEPTION_OK): Likewise.
(OVERFLOW_EXCEPTION_OK): Likewise.
(UNDERFLOW_EXCEPTION_OK): Likewise.
(NO_INEXACT_EXCEPTION): Likewise.
(EXCEPTIONS_OK): Likewise.
(IGNORE_ZERO_INF_SIGN): Likewise.
(TEST_NAN_SIGN): Likewise.
(TEST_NAN_PAYLOAD): Likewise.
(NO_TEST_INLINE): Likewise.
(XFAIL_TEST): Likewise.
(ERRNO_UNCHANGED): Likewise.
(ERRNO_EDOM): Likewise.
(ERRNO_ERANGE): Likewise.
(IGNORE_RESULT): Likewise.
(NON_FINITE): Likewise.
(TEST_SNAN): Likewise.
(NO_TEST_MATHVEC): Likewise.
(__CONCATX): Likewise.
(TYPE_MIN): Likewise.
(TYPE_TRUE_MIN): Likewise.
(TYPE_MAX): Likewise.
(MIN_EXP): Likewise.
(MAX_EXP): Likewise.
(MANT_DIG): Likewise.
(FSTR_MAX): Likewise.
(ulp_idx): Likewise.
(qtype_str): Remove static.
(TEST_COND_binary32): Remove.
(TEST_COND_binary64): Likewise.
(TEST_COND_binary128): Likewise.
(TEST_COND_ibm128): Likewise.
(TEST_COND_intel96): Likewise.
(TEST_COND_m68k96): Likewise.
(TEST_COND_ibm128_libgcc): Likewise.
(XFAIL_IBM128_LIBGCC): Likewise.
(PAYLOAD_DIG): Likewise.
(UNDERFLOW_EXCEPTION_FLOAT): Likewise.
(UNDERFLOW_EXCEPTION_OK_FLOAT): Likewise.
(UNDERFLOW_EXCEPTION_DOUBLE): Likewise.
(UNDERFLOW_EXCEPTION_OK_DOUBLE): Likewise.
(UNDERFLOW_EXCEPTION_LDOUBLE_IBM): Likewise.
(UNDERFLOW_EXCEPTION_BEFORE_ROUNDING): Likewise.
(TEST_COND_long32): Likewise.
(TEST_COND_long64): Likewise.
(TEST_COND_before_rounding): Likewise.
(TEST_COND_after_rounding): Likewise.
(ulps_file_name): Likewise.
(ulps_file): Likewise.
(output_ulps): Likewise.
(output_dir): Likewise.
(noErrors): Likewise.
(noTests): Likewise.
(noExcTests): Likewise.
(noErrnoTests): Likewise.
(verbose): Likewise.
(output_max_error): Likewise.
(output_points): Likewise.
(ignore_max_ulp): Likewise.
(max_error): Likewise.
(real_max_error): Likewise.
(imag_max_error): Likewise.
(prev_max_error): Likewise.
(prev_real_max_error): Likewise.
(prev_imag_max_error): Likewise.
(max_valid_error): Likewise.
(TYPE_DECIMAL_DIG): Likewise.
(TYPE_HEX_DIG): Likewise.
(fmt_ftostr): Likewise.
(compare_ulp_data): Likewise.
(find_ulps): Likewise.
(init_max_error): Likewise.
(set_max_error): Likewise.
(print_float): Likewise.
(print_screen): Likewise.
(print_screen_max_error): Likewise.
(update_stats): Likewise.
(print_function_ulps): Likewise.
(print_complex_function_ulps): Likewise.
(fpstack_test): Likewise.
(print_max_error): Likewise.
(print_complex_max_error): Likewise.
(test_single_exception): Likewise.
(test_exceptions): Likewise.
(test_single_errno): Likewise.
(test_errno): Likewise.
(ULPDIFF): Likewise.
(ulp): Likewise.
(check_float_internal): Likewise.
(check_float): Likewise.
(check_complex): Likewise.
(check_int): Likewise.
(check_long): Likewise.
(check_bool): Likewise.
(check_longlong): Likewise.
(check_intmax_t): Likewise.
(check_uintmax_t): Likewise.
(enable_test): Likewise.
(matherr): Likewise.
(initialize): Likewise.
(options): Likewise.
(doc): Remove static.
(argp): Likewise.
(parse_opt): Remove.
(check_ulp): Likewise.
(libm_test_init): Likewise.
(libm_test_finish): Likewise.
* math/Makefile (libm-test-support): New variable.
(test-extras): Add libm-test-support files.
(extra-test-objs): Likewise.
(CFLAGS-libm-test-support-float.c): New variable.
(CFLAGS-libm-test-support-double.c): Likewise.
(CFLAGS-libm-test-support-ldouble.c): Likewise.
($(addprefix $(objpfx),$(libm-tests)): Depend on appropriate
libm-test-support objects.
2017-02-08 21:11:49 +00:00
|
|
|
{
|
|
|
|
max_error = 0;
|
|
|
|
real_max_error = 0;
|
|
|
|
imag_max_error = 0;
|
Add test infrastructure for narrowing libm functions.
This patch continues preparations for adding TS 18661-1 narrowing libm
functions by adding the required testsuite infrastructure to test such
functions through the libm-test infrastructure.
That infrastructure is based around testing for a single type, FLOAT.
For the narrowing functions, FLOAT, the "main" type for testing, is
the function return type; the argument type is ARG_FLOAT. This is
consistent with how the code built once for each type,
libm-test-support.c, depends on FLOAT for such things as calculating
ulps errors in results but can already handle different argument types
(pointers, integers, long double for nexttoward).
Makefile machinery is added to handle building tests for all pairs of
types for which there are narrowing functions (as with non-narrowing
functions, aliases are tested just the same as the functions they
alias). gen-auto-libm-tests gains a --narrow option for building
outputs for narrowing functions (so narrowing sqrt and fma will share
the same inputs as non-narrowing, but gen-auto-libm-tests will be run
with and without that option to generate different output files). In
the narrowing case, the auto-libm-test-out-narrow-* files include
annotations for each test about what properties ARG_FLOAT must have to
be able to represent all the inputs for that test; those annotations
result in calls to the TEST_COND_arg_fmt macro.
gen-libm-test.pl has some minor updates to handle narrowing tests (for
example, arguments in such tests must be surrounded by ARG_LIT calls
instead of LIT calls). Various new macros are added to the C test
support code (for example, sNaN initializers need to be properly
typed, so arg_snan_value is added; other such arg_* macros are added
as it seems cleanest to do so, though some are not strictly required).
Special-casing of the ibm128 format to allow for its limitations is
adjusted to handle it as the argument format as well as as the result
format; thus, the tests of the new functions allow nonzero ulps only
in the case where ibm128 is the argument format, as otherwise the
functions correspond to fully-defined IEEE operations. The ulps in
question appear as e.g. 'Function: "add_ldouble"' in libm-test-ulps
(with 1ulp errors then listed for double and float for that function
in powerpc); no support is added to generate corresponding faddl /
daddl ulps listings in the ulps table in the manual.
For the previous patch, I noted the need to avoid spurious macro
expansions of identifiers such as "add". A test test-narrow-macros.c
is added to verify such macro expansions are successfully avoided, and
there is also a -mlong-double-64 version of that test for ldbl-opt.
This test is set up to cover the full set of relevant identifiers from
the start rather than adding functions one at a time as each function
group is added.
Tested for x86_64 (this patch in isolation, as well as testing for
various configurations in conjunction with the actual addition of
"add" functions).
* math/Makefile (test-type-pairs): New variable.
(test-type-pairs-f64xf128-yes): Likewise.
(tests): Add test-narrow-macros.
(libm-test-funcs-narrow): New variable.
(libm-test-c-narrow): Likewise.
(generated): Add $(libm-test-c-narrow).
(libm-tests-base-narrow): New variable.
(libm-tests-narrow): Likewise.
(libm-tests): Add $(libm-tests-narrow).
(libm-tests-for-type): Handle $(libm-tests-narrow).
(libm-test-c-narrow-obj): New variable.
($(libm-test-c-narrow-obj)): New rule.
($(foreach t,$(libm-tests-narrow),$(objpfx)$(t).c)): Likewise.
($(foreach f,$(libm-test-funcs-narrow),$(objpfx)$(o)-$(f).o)): Use
$(o-iterator) to set dependencies and CFLAGS.
* math/gen-auto-libm-tests.c: Document use for narrowing
functions.
(output_for_one_input_case): Take argument NARROW.
(generate_output): Likewise. Update call to
output_for_one_input_case.
(main): Take --narrow option. Update call to generate_output.
* math/gen-libm-test.pl (_apply_lit): Take macro name as argument.
(apply_lit): Update call to _apply_lit.
(apply_arglit): New function.
(parse_args): Handle "a" arguments.
(parse_auto_input): Handle format names using ":".
* math/README.libm-test: Document "a" parameter type.
* math/libm-test-support.h (ARG_TYPE_MIN): New macro.
(ARG_TYPE_TRUE_MIN): Likewise.
(ARG_TYPE_MAX): Likwise.
(ARG_MIN_EXP): Likewise.
(ARG_MAX_EXP): Likewise.
(ARG_MANT_DIG): Likewise.
(TEST_COND_arg_ibm128): Likewise.
(TEST_COND_ibm128_libgcc): Define conditional on [ARG_FLOAT].
(TEST_COND_arg_fmt): New macro.
(init_max_error): Update prototype.
* math/libm-test-support.c (test_ibm128): New variable.
(init_max_error): Take argument testing_ibm128 and set test_ibm128
instead of using [TEST_COND_ibm128] conditional.
(test_exceptions): Use test_ibm128 instead of TEST_COND_ibm128.
* math/libm-test-driver.c (STR_ARG_FLOAT): New macro.
[TEST_NARROW] (TEST_MSG): New definition.
(arg_plus_zero): New macro.
(arg_minus_zero): Likewise.
(arg_plus_infty): Likewise.
(arg_minus_infty): Likewise.
(arg_qnan_value_pl): Likewise.
(arg_qnan_value): Likewise.
(arg_snan_value_pl): Likewise.
(arg_snan_value): Likewise.
(arg_max_value): Likewise.
(arg_min_value): Likewise.
(arg_min_subnorm_value): Likewise.
[ARG_FLOAT] (struct test_aa_f_data): New struct type.
(RUN_TEST_LOOP_aa_f): New macro.
(TEST_SUFF): New macro.
(TEST_SUFF_STR): Likewise.
[!TEST_MATHVEC] (VEC_SUFF): Don't define.
(TEST_COND_any_ibm128): New macro.
(START): Use TEST_SUFF and TEST_SUFF_STR in initializer for
this_func. Update call to init_max_error.
* math/test-double.h (FUNC_NARROW_PREFIX): New macro.
* math/test-float.h (FUNC_NARROW_PREFIX): Likewise.
* math/test-float128.h (FUNC_NARROW_PREFIX): Likewise.
* math/test-float32.h (FUNC_NARROW_PREFIX): Likewise.
* math/test-float32x.h (FUNC_NARROW_PREFIX): Likewise.
* math/test-float64.h (FUNC_NARROW_PREFIX): Likewise.
* math/test-float64x.h (FUNC_NARROW_PREFIX): Likewise.
* math/test-math-scalar.h (TEST_NARROW): Likewise.
* math/test-math-vector.h (TEST_NARROW): Likewise.
* math/test-arg-double.h: New file.
* math/test-arg-float128.h: Likewise.
* math/test-arg-float32x.h: Likewise.
* math/test-arg-float64.h: Likewise.
* math/test-arg-float64x.h: Likewise.
* math/test-arg-ldouble.h: Likewise.
* math/test-math-narrow.h: Likewise.
* math/test-narrow-macros.c: Likewise.
* sysdeps/ieee754/ldbl-opt/test-narrow-macros-ldbl-64.c: Likewise.
* sysdeps/ieee754/ldbl-opt/Makefile (tests): Add
test-narrow-macros-ldbl-64.
(CFLAGS-test-narrow-macros-ldbl-64.c): New variable.
2018-02-09 21:55:48 +00:00
|
|
|
test_ibm128 = testing_ibm128;
|
Build most libm-test support code once per type.
libm-test-driver.c contains various functions used in the course of
libm testing, which are built as part of each test using this
machinery.
Currently, these functions get built for three tests for each type
(e.g. test-float, test-ifloat, test-float-finite), plus the vector
function tests. All these tests are huge and thus slow to build; the
output of gen-libm-test.pl totals around 40 MB across all functions.
To make the individual tests built from the Makefile smaller, it makes
sense to split these tests up so the tests for each function are built
separately (thus, three tests for each (function, type) pair, plus
vector tests built only for functions that actually have vector
versions). This improves parallelism and means that if tests fail,
the summary of failed tests makes it more obvious where the problem
might be without needing to look in the .out files to see which
functions' tests failed (though architecture maintainers still need to
keep libm-test-ulps up to date to avoid spurious failures of little
interest).
Simply including libm-test-driver.c as-is in such individual-function
tests does not work because of unused static check_* functions (those
functions only being used for the types of the outputs of the function
under test). It also means the common code gets built over 1000 times
instead of nine (plus vector tests). To avoid that issue, this patch
splits out the bulk of the libm-test-driver.c code into a separate
file libm-test-support.c (with a few functions made non-static). That
separate file is built only once for each floating-point type (so at
present three times, or twice on architectures with long double =
double). Definitions needed in both libm-test-support.c and
libm-test-driver.c go in libm-test-support.h (it's possible some of
those are in fact only needed in one of the two files).
libm-test-driver.c keeps definitions of a limited number of variables
used to configure how libm-test-support.c behaves, various macros and
structures needed by individual-function tests, and the main function.
This move is also consistent in spirit with the move away from
test-skeleton.c having all the test support code, to a small
support/test-driver.c included in individual tests with most of the
code built separately.
Tested for x86_64 and x86.
* math/libm-test-support.c: New file. Content from
math/libm-test-driver.c.
* math/libm-test-support.h: Likewise.
* math/libm-test-support-double.c: New file.
* math/libm-test-support-float.c: Likewise.
* math/libm-test-support-ldouble.c: Likewise.
* math/libm-test-driver.c: Remove main comment and header
includes. Include libm-test-support.h.
[!_GNU_SOURCE] (_GNU_SOURCE): Do not define.
(flag_test_errno): Remove static.
(flag_test_exceptions): Likewise.
(flag_test_finite): Likewise.
(flag_test_inline): Likewise.
(flag_test_mathvec): Likewise.
(test_msg): Likewise.
(NO_EXCEPTION): Remove.
(INVALID_EXCEPTION): Likewise.
(DIVIDE_BY_ZERO_EXCEPTION): Likewise.
(OVERFLOW_EXCEPTION): Likewise.
(UNDERFLOW_EXCEPTION): Likewise.
(INEXACT_EXCEPTION): Likewise.
(INVALID_EXCEPTION_OK): Likewise.
(DIVIDE_BY_ZERO_EXCEPTION_OK): Likewise.
(OVERFLOW_EXCEPTION_OK): Likewise.
(UNDERFLOW_EXCEPTION_OK): Likewise.
(NO_INEXACT_EXCEPTION): Likewise.
(EXCEPTIONS_OK): Likewise.
(IGNORE_ZERO_INF_SIGN): Likewise.
(TEST_NAN_SIGN): Likewise.
(TEST_NAN_PAYLOAD): Likewise.
(NO_TEST_INLINE): Likewise.
(XFAIL_TEST): Likewise.
(ERRNO_UNCHANGED): Likewise.
(ERRNO_EDOM): Likewise.
(ERRNO_ERANGE): Likewise.
(IGNORE_RESULT): Likewise.
(NON_FINITE): Likewise.
(TEST_SNAN): Likewise.
(NO_TEST_MATHVEC): Likewise.
(__CONCATX): Likewise.
(TYPE_MIN): Likewise.
(TYPE_TRUE_MIN): Likewise.
(TYPE_MAX): Likewise.
(MIN_EXP): Likewise.
(MAX_EXP): Likewise.
(MANT_DIG): Likewise.
(FSTR_MAX): Likewise.
(ulp_idx): Likewise.
(qtype_str): Remove static.
(TEST_COND_binary32): Remove.
(TEST_COND_binary64): Likewise.
(TEST_COND_binary128): Likewise.
(TEST_COND_ibm128): Likewise.
(TEST_COND_intel96): Likewise.
(TEST_COND_m68k96): Likewise.
(TEST_COND_ibm128_libgcc): Likewise.
(XFAIL_IBM128_LIBGCC): Likewise.
(PAYLOAD_DIG): Likewise.
(UNDERFLOW_EXCEPTION_FLOAT): Likewise.
(UNDERFLOW_EXCEPTION_OK_FLOAT): Likewise.
(UNDERFLOW_EXCEPTION_DOUBLE): Likewise.
(UNDERFLOW_EXCEPTION_OK_DOUBLE): Likewise.
(UNDERFLOW_EXCEPTION_LDOUBLE_IBM): Likewise.
(UNDERFLOW_EXCEPTION_BEFORE_ROUNDING): Likewise.
(TEST_COND_long32): Likewise.
(TEST_COND_long64): Likewise.
(TEST_COND_before_rounding): Likewise.
(TEST_COND_after_rounding): Likewise.
(ulps_file_name): Likewise.
(ulps_file): Likewise.
(output_ulps): Likewise.
(output_dir): Likewise.
(noErrors): Likewise.
(noTests): Likewise.
(noExcTests): Likewise.
(noErrnoTests): Likewise.
(verbose): Likewise.
(output_max_error): Likewise.
(output_points): Likewise.
(ignore_max_ulp): Likewise.
(max_error): Likewise.
(real_max_error): Likewise.
(imag_max_error): Likewise.
(prev_max_error): Likewise.
(prev_real_max_error): Likewise.
(prev_imag_max_error): Likewise.
(max_valid_error): Likewise.
(TYPE_DECIMAL_DIG): Likewise.
(TYPE_HEX_DIG): Likewise.
(fmt_ftostr): Likewise.
(compare_ulp_data): Likewise.
(find_ulps): Likewise.
(init_max_error): Likewise.
(set_max_error): Likewise.
(print_float): Likewise.
(print_screen): Likewise.
(print_screen_max_error): Likewise.
(update_stats): Likewise.
(print_function_ulps): Likewise.
(print_complex_function_ulps): Likewise.
(fpstack_test): Likewise.
(print_max_error): Likewise.
(print_complex_max_error): Likewise.
(test_single_exception): Likewise.
(test_exceptions): Likewise.
(test_single_errno): Likewise.
(test_errno): Likewise.
(ULPDIFF): Likewise.
(ulp): Likewise.
(check_float_internal): Likewise.
(check_float): Likewise.
(check_complex): Likewise.
(check_int): Likewise.
(check_long): Likewise.
(check_bool): Likewise.
(check_longlong): Likewise.
(check_intmax_t): Likewise.
(check_uintmax_t): Likewise.
(enable_test): Likewise.
(matherr): Likewise.
(initialize): Likewise.
(options): Likewise.
(doc): Remove static.
(argp): Likewise.
(parse_opt): Remove.
(check_ulp): Likewise.
(libm_test_init): Likewise.
(libm_test_finish): Likewise.
* math/Makefile (libm-test-support): New variable.
(test-extras): Add libm-test-support files.
(extra-test-objs): Likewise.
(CFLAGS-libm-test-support-float.c): New variable.
(CFLAGS-libm-test-support-double.c): Likewise.
(CFLAGS-libm-test-support-ldouble.c): Likewise.
($(addprefix $(objpfx),$(libm-tests)): Depend on appropriate
libm-test-support objects.
2017-02-08 21:11:49 +00:00
|
|
|
prev_max_error = find_ulps (name, func_ulps,
|
|
|
|
sizeof (func_ulps) / sizeof (func_ulps[0]));
|
|
|
|
prev_real_max_error = find_ulps (name, func_real_ulps,
|
|
|
|
(sizeof (func_real_ulps)
|
|
|
|
/ sizeof (func_real_ulps[0])));
|
|
|
|
prev_imag_max_error = find_ulps (name, func_imag_ulps,
|
|
|
|
(sizeof (func_imag_ulps)
|
|
|
|
/ sizeof (func_imag_ulps[0])));
|
Add test infrastructure for narrowing libm functions.
This patch continues preparations for adding TS 18661-1 narrowing libm
functions by adding the required testsuite infrastructure to test such
functions through the libm-test infrastructure.
That infrastructure is based around testing for a single type, FLOAT.
For the narrowing functions, FLOAT, the "main" type for testing, is
the function return type; the argument type is ARG_FLOAT. This is
consistent with how the code built once for each type,
libm-test-support.c, depends on FLOAT for such things as calculating
ulps errors in results but can already handle different argument types
(pointers, integers, long double for nexttoward).
Makefile machinery is added to handle building tests for all pairs of
types for which there are narrowing functions (as with non-narrowing
functions, aliases are tested just the same as the functions they
alias). gen-auto-libm-tests gains a --narrow option for building
outputs for narrowing functions (so narrowing sqrt and fma will share
the same inputs as non-narrowing, but gen-auto-libm-tests will be run
with and without that option to generate different output files). In
the narrowing case, the auto-libm-test-out-narrow-* files include
annotations for each test about what properties ARG_FLOAT must have to
be able to represent all the inputs for that test; those annotations
result in calls to the TEST_COND_arg_fmt macro.
gen-libm-test.pl has some minor updates to handle narrowing tests (for
example, arguments in such tests must be surrounded by ARG_LIT calls
instead of LIT calls). Various new macros are added to the C test
support code (for example, sNaN initializers need to be properly
typed, so arg_snan_value is added; other such arg_* macros are added
as it seems cleanest to do so, though some are not strictly required).
Special-casing of the ibm128 format to allow for its limitations is
adjusted to handle it as the argument format as well as as the result
format; thus, the tests of the new functions allow nonzero ulps only
in the case where ibm128 is the argument format, as otherwise the
functions correspond to fully-defined IEEE operations. The ulps in
question appear as e.g. 'Function: "add_ldouble"' in libm-test-ulps
(with 1ulp errors then listed for double and float for that function
in powerpc); no support is added to generate corresponding faddl /
daddl ulps listings in the ulps table in the manual.
For the previous patch, I noted the need to avoid spurious macro
expansions of identifiers such as "add". A test test-narrow-macros.c
is added to verify such macro expansions are successfully avoided, and
there is also a -mlong-double-64 version of that test for ldbl-opt.
This test is set up to cover the full set of relevant identifiers from
the start rather than adding functions one at a time as each function
group is added.
Tested for x86_64 (this patch in isolation, as well as testing for
various configurations in conjunction with the actual addition of
"add" functions).
* math/Makefile (test-type-pairs): New variable.
(test-type-pairs-f64xf128-yes): Likewise.
(tests): Add test-narrow-macros.
(libm-test-funcs-narrow): New variable.
(libm-test-c-narrow): Likewise.
(generated): Add $(libm-test-c-narrow).
(libm-tests-base-narrow): New variable.
(libm-tests-narrow): Likewise.
(libm-tests): Add $(libm-tests-narrow).
(libm-tests-for-type): Handle $(libm-tests-narrow).
(libm-test-c-narrow-obj): New variable.
($(libm-test-c-narrow-obj)): New rule.
($(foreach t,$(libm-tests-narrow),$(objpfx)$(t).c)): Likewise.
($(foreach f,$(libm-test-funcs-narrow),$(objpfx)$(o)-$(f).o)): Use
$(o-iterator) to set dependencies and CFLAGS.
* math/gen-auto-libm-tests.c: Document use for narrowing
functions.
(output_for_one_input_case): Take argument NARROW.
(generate_output): Likewise. Update call to
output_for_one_input_case.
(main): Take --narrow option. Update call to generate_output.
* math/gen-libm-test.pl (_apply_lit): Take macro name as argument.
(apply_lit): Update call to _apply_lit.
(apply_arglit): New function.
(parse_args): Handle "a" arguments.
(parse_auto_input): Handle format names using ":".
* math/README.libm-test: Document "a" parameter type.
* math/libm-test-support.h (ARG_TYPE_MIN): New macro.
(ARG_TYPE_TRUE_MIN): Likewise.
(ARG_TYPE_MAX): Likwise.
(ARG_MIN_EXP): Likewise.
(ARG_MAX_EXP): Likewise.
(ARG_MANT_DIG): Likewise.
(TEST_COND_arg_ibm128): Likewise.
(TEST_COND_ibm128_libgcc): Define conditional on [ARG_FLOAT].
(TEST_COND_arg_fmt): New macro.
(init_max_error): Update prototype.
* math/libm-test-support.c (test_ibm128): New variable.
(init_max_error): Take argument testing_ibm128 and set test_ibm128
instead of using [TEST_COND_ibm128] conditional.
(test_exceptions): Use test_ibm128 instead of TEST_COND_ibm128.
* math/libm-test-driver.c (STR_ARG_FLOAT): New macro.
[TEST_NARROW] (TEST_MSG): New definition.
(arg_plus_zero): New macro.
(arg_minus_zero): Likewise.
(arg_plus_infty): Likewise.
(arg_minus_infty): Likewise.
(arg_qnan_value_pl): Likewise.
(arg_qnan_value): Likewise.
(arg_snan_value_pl): Likewise.
(arg_snan_value): Likewise.
(arg_max_value): Likewise.
(arg_min_value): Likewise.
(arg_min_subnorm_value): Likewise.
[ARG_FLOAT] (struct test_aa_f_data): New struct type.
(RUN_TEST_LOOP_aa_f): New macro.
(TEST_SUFF): New macro.
(TEST_SUFF_STR): Likewise.
[!TEST_MATHVEC] (VEC_SUFF): Don't define.
(TEST_COND_any_ibm128): New macro.
(START): Use TEST_SUFF and TEST_SUFF_STR in initializer for
this_func. Update call to init_max_error.
* math/test-double.h (FUNC_NARROW_PREFIX): New macro.
* math/test-float.h (FUNC_NARROW_PREFIX): Likewise.
* math/test-float128.h (FUNC_NARROW_PREFIX): Likewise.
* math/test-float32.h (FUNC_NARROW_PREFIX): Likewise.
* math/test-float32x.h (FUNC_NARROW_PREFIX): Likewise.
* math/test-float64.h (FUNC_NARROW_PREFIX): Likewise.
* math/test-float64x.h (FUNC_NARROW_PREFIX): Likewise.
* math/test-math-scalar.h (TEST_NARROW): Likewise.
* math/test-math-vector.h (TEST_NARROW): Likewise.
* math/test-arg-double.h: New file.
* math/test-arg-float128.h: Likewise.
* math/test-arg-float32x.h: Likewise.
* math/test-arg-float64.h: Likewise.
* math/test-arg-float64x.h: Likewise.
* math/test-arg-ldouble.h: Likewise.
* math/test-math-narrow.h: Likewise.
* math/test-narrow-macros.c: Likewise.
* sysdeps/ieee754/ldbl-opt/test-narrow-macros-ldbl-64.c: Likewise.
* sysdeps/ieee754/ldbl-opt/Makefile (tests): Add
test-narrow-macros-ldbl-64.
(CFLAGS-test-narrow-macros-ldbl-64.c): New variable.
2018-02-09 21:55:48 +00:00
|
|
|
if (testing_ibm128)
|
|
|
|
/* The documented accuracy of IBM long double division is 3ulp
|
|
|
|
(see libgcc/config/rs6000/ibm-ldouble-format), so do not
|
|
|
|
require better accuracy for libm functions that are exactly
|
|
|
|
defined for other formats. */
|
|
|
|
max_valid_error = exact ? 3 : 16;
|
|
|
|
else
|
|
|
|
max_valid_error = exact ? 0 : 9;
|
Build most libm-test support code once per type.
libm-test-driver.c contains various functions used in the course of
libm testing, which are built as part of each test using this
machinery.
Currently, these functions get built for three tests for each type
(e.g. test-float, test-ifloat, test-float-finite), plus the vector
function tests. All these tests are huge and thus slow to build; the
output of gen-libm-test.pl totals around 40 MB across all functions.
To make the individual tests built from the Makefile smaller, it makes
sense to split these tests up so the tests for each function are built
separately (thus, three tests for each (function, type) pair, plus
vector tests built only for functions that actually have vector
versions). This improves parallelism and means that if tests fail,
the summary of failed tests makes it more obvious where the problem
might be without needing to look in the .out files to see which
functions' tests failed (though architecture maintainers still need to
keep libm-test-ulps up to date to avoid spurious failures of little
interest).
Simply including libm-test-driver.c as-is in such individual-function
tests does not work because of unused static check_* functions (those
functions only being used for the types of the outputs of the function
under test). It also means the common code gets built over 1000 times
instead of nine (plus vector tests). To avoid that issue, this patch
splits out the bulk of the libm-test-driver.c code into a separate
file libm-test-support.c (with a few functions made non-static). That
separate file is built only once for each floating-point type (so at
present three times, or twice on architectures with long double =
double). Definitions needed in both libm-test-support.c and
libm-test-driver.c go in libm-test-support.h (it's possible some of
those are in fact only needed in one of the two files).
libm-test-driver.c keeps definitions of a limited number of variables
used to configure how libm-test-support.c behaves, various macros and
structures needed by individual-function tests, and the main function.
This move is also consistent in spirit with the move away from
test-skeleton.c having all the test support code, to a small
support/test-driver.c included in individual tests with most of the
code built separately.
Tested for x86_64 and x86.
* math/libm-test-support.c: New file. Content from
math/libm-test-driver.c.
* math/libm-test-support.h: Likewise.
* math/libm-test-support-double.c: New file.
* math/libm-test-support-float.c: Likewise.
* math/libm-test-support-ldouble.c: Likewise.
* math/libm-test-driver.c: Remove main comment and header
includes. Include libm-test-support.h.
[!_GNU_SOURCE] (_GNU_SOURCE): Do not define.
(flag_test_errno): Remove static.
(flag_test_exceptions): Likewise.
(flag_test_finite): Likewise.
(flag_test_inline): Likewise.
(flag_test_mathvec): Likewise.
(test_msg): Likewise.
(NO_EXCEPTION): Remove.
(INVALID_EXCEPTION): Likewise.
(DIVIDE_BY_ZERO_EXCEPTION): Likewise.
(OVERFLOW_EXCEPTION): Likewise.
(UNDERFLOW_EXCEPTION): Likewise.
(INEXACT_EXCEPTION): Likewise.
(INVALID_EXCEPTION_OK): Likewise.
(DIVIDE_BY_ZERO_EXCEPTION_OK): Likewise.
(OVERFLOW_EXCEPTION_OK): Likewise.
(UNDERFLOW_EXCEPTION_OK): Likewise.
(NO_INEXACT_EXCEPTION): Likewise.
(EXCEPTIONS_OK): Likewise.
(IGNORE_ZERO_INF_SIGN): Likewise.
(TEST_NAN_SIGN): Likewise.
(TEST_NAN_PAYLOAD): Likewise.
(NO_TEST_INLINE): Likewise.
(XFAIL_TEST): Likewise.
(ERRNO_UNCHANGED): Likewise.
(ERRNO_EDOM): Likewise.
(ERRNO_ERANGE): Likewise.
(IGNORE_RESULT): Likewise.
(NON_FINITE): Likewise.
(TEST_SNAN): Likewise.
(NO_TEST_MATHVEC): Likewise.
(__CONCATX): Likewise.
(TYPE_MIN): Likewise.
(TYPE_TRUE_MIN): Likewise.
(TYPE_MAX): Likewise.
(MIN_EXP): Likewise.
(MAX_EXP): Likewise.
(MANT_DIG): Likewise.
(FSTR_MAX): Likewise.
(ulp_idx): Likewise.
(qtype_str): Remove static.
(TEST_COND_binary32): Remove.
(TEST_COND_binary64): Likewise.
(TEST_COND_binary128): Likewise.
(TEST_COND_ibm128): Likewise.
(TEST_COND_intel96): Likewise.
(TEST_COND_m68k96): Likewise.
(TEST_COND_ibm128_libgcc): Likewise.
(XFAIL_IBM128_LIBGCC): Likewise.
(PAYLOAD_DIG): Likewise.
(UNDERFLOW_EXCEPTION_FLOAT): Likewise.
(UNDERFLOW_EXCEPTION_OK_FLOAT): Likewise.
(UNDERFLOW_EXCEPTION_DOUBLE): Likewise.
(UNDERFLOW_EXCEPTION_OK_DOUBLE): Likewise.
(UNDERFLOW_EXCEPTION_LDOUBLE_IBM): Likewise.
(UNDERFLOW_EXCEPTION_BEFORE_ROUNDING): Likewise.
(TEST_COND_long32): Likewise.
(TEST_COND_long64): Likewise.
(TEST_COND_before_rounding): Likewise.
(TEST_COND_after_rounding): Likewise.
(ulps_file_name): Likewise.
(ulps_file): Likewise.
(output_ulps): Likewise.
(output_dir): Likewise.
(noErrors): Likewise.
(noTests): Likewise.
(noExcTests): Likewise.
(noErrnoTests): Likewise.
(verbose): Likewise.
(output_max_error): Likewise.
(output_points): Likewise.
(ignore_max_ulp): Likewise.
(max_error): Likewise.
(real_max_error): Likewise.
(imag_max_error): Likewise.
(prev_max_error): Likewise.
(prev_real_max_error): Likewise.
(prev_imag_max_error): Likewise.
(max_valid_error): Likewise.
(TYPE_DECIMAL_DIG): Likewise.
(TYPE_HEX_DIG): Likewise.
(fmt_ftostr): Likewise.
(compare_ulp_data): Likewise.
(find_ulps): Likewise.
(init_max_error): Likewise.
(set_max_error): Likewise.
(print_float): Likewise.
(print_screen): Likewise.
(print_screen_max_error): Likewise.
(update_stats): Likewise.
(print_function_ulps): Likewise.
(print_complex_function_ulps): Likewise.
(fpstack_test): Likewise.
(print_max_error): Likewise.
(print_complex_max_error): Likewise.
(test_single_exception): Likewise.
(test_exceptions): Likewise.
(test_single_errno): Likewise.
(test_errno): Likewise.
(ULPDIFF): Likewise.
(ulp): Likewise.
(check_float_internal): Likewise.
(check_float): Likewise.
(check_complex): Likewise.
(check_int): Likewise.
(check_long): Likewise.
(check_bool): Likewise.
(check_longlong): Likewise.
(check_intmax_t): Likewise.
(check_uintmax_t): Likewise.
(enable_test): Likewise.
(matherr): Likewise.
(initialize): Likewise.
(options): Likewise.
(doc): Remove static.
(argp): Likewise.
(parse_opt): Remove.
(check_ulp): Likewise.
(libm_test_init): Likewise.
(libm_test_finish): Likewise.
* math/Makefile (libm-test-support): New variable.
(test-extras): Add libm-test-support files.
(extra-test-objs): Likewise.
(CFLAGS-libm-test-support-float.c): New variable.
(CFLAGS-libm-test-support-double.c): Likewise.
(CFLAGS-libm-test-support-ldouble.c): Likewise.
($(addprefix $(objpfx),$(libm-tests)): Depend on appropriate
libm-test-support objects.
2017-02-08 21:11:49 +00:00
|
|
|
prev_max_error = (prev_max_error <= max_valid_error
|
|
|
|
? prev_max_error
|
|
|
|
: max_valid_error);
|
|
|
|
prev_real_max_error = (prev_real_max_error <= max_valid_error
|
|
|
|
? prev_real_max_error
|
|
|
|
: max_valid_error);
|
|
|
|
prev_imag_max_error = (prev_imag_max_error <= max_valid_error
|
|
|
|
? prev_imag_max_error
|
|
|
|
: max_valid_error);
|
|
|
|
feclearexcept (FE_ALL_EXCEPT);
|
|
|
|
errno = 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
set_max_error (FLOAT current, FLOAT *curr_max_error)
|
|
|
|
{
|
|
|
|
if (current > *curr_max_error && current <= max_valid_error)
|
|
|
|
*curr_max_error = current;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
/* Print a FLOAT. */
|
|
|
|
static void
|
|
|
|
print_float (FLOAT f)
|
|
|
|
{
|
|
|
|
/* As printf doesn't differ between a sNaN and a qNaN, do this manually. */
|
|
|
|
if (issignaling (f))
|
|
|
|
printf ("sNaN\n");
|
|
|
|
else if (isnan (f))
|
|
|
|
printf ("qNaN\n");
|
|
|
|
else
|
|
|
|
{
|
|
|
|
char fstrn[FSTR_MAX], fstrx[FSTR_MAX];
|
|
|
|
fmt_ftostr (fstrn, FSTR_MAX, TYPE_DECIMAL_DIG - 1, "e", f);
|
|
|
|
fmt_ftostr (fstrx, FSTR_MAX, TYPE_HEX_DIG - 1, "a", f);
|
|
|
|
printf ("%s %s\n", fstrn, fstrx);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Should the message print to screen? This depends on the verbose flag,
|
|
|
|
and the test status. */
|
|
|
|
static int
|
|
|
|
print_screen (int ok)
|
|
|
|
{
|
|
|
|
if (output_points
|
|
|
|
&& (verbose > 1
|
|
|
|
|| (verbose == 1 && ok == 0)))
|
|
|
|
return 1;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
/* Should the message print to screen? This depends on the verbose flag,
|
|
|
|
and the test status. */
|
|
|
|
static int
|
|
|
|
print_screen_max_error (int ok)
|
|
|
|
{
|
|
|
|
if (output_max_error
|
|
|
|
&& (verbose > 1
|
|
|
|
|| ((verbose == 1) && (ok == 0))))
|
|
|
|
return 1;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Update statistic counters. */
|
|
|
|
static void
|
|
|
|
update_stats (int ok)
|
|
|
|
{
|
|
|
|
++noTests;
|
|
|
|
if (!ok)
|
|
|
|
++noErrors;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
print_function_ulps (const char *function_name, FLOAT ulp)
|
|
|
|
{
|
|
|
|
if (output_ulps)
|
|
|
|
{
|
|
|
|
char ustrn[FSTR_MAX];
|
|
|
|
FTOSTR (ustrn, FSTR_MAX, "%.0f", FUNC (ceil) (ulp));
|
|
|
|
fprintf (ulps_file, "Function: \"%s\":\n", function_name);
|
|
|
|
fprintf (ulps_file, "%s: %s\n", qtype_str, ustrn);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
static void
|
|
|
|
print_complex_function_ulps (const char *function_name, FLOAT real_ulp,
|
|
|
|
FLOAT imag_ulp)
|
|
|
|
{
|
|
|
|
if (output_ulps)
|
|
|
|
{
|
|
|
|
char fstrn[FSTR_MAX];
|
|
|
|
if (real_ulp != 0.0)
|
|
|
|
{
|
|
|
|
FTOSTR (fstrn, FSTR_MAX, "%.0f", FUNC (ceil) (real_ulp));
|
|
|
|
fprintf (ulps_file, "Function: Real part of \"%s\":\n", function_name);
|
|
|
|
fprintf (ulps_file, "%s: %s\n", qtype_str, fstrn);
|
|
|
|
}
|
|
|
|
if (imag_ulp != 0.0)
|
|
|
|
{
|
|
|
|
FTOSTR (fstrn, FSTR_MAX, "%.0f", FUNC (ceil) (imag_ulp));
|
|
|
|
fprintf (ulps_file, "Function: Imaginary part of \"%s\":\n", function_name);
|
|
|
|
fprintf (ulps_file, "%s: %s\n", qtype_str, fstrn);
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
/* Test if Floating-Point stack hasn't changed */
|
|
|
|
static void
|
|
|
|
fpstack_test (const char *test_name)
|
|
|
|
{
|
|
|
|
#if defined (__i386__) || defined (__x86_64__)
|
|
|
|
static int old_stack;
|
|
|
|
int sw;
|
|
|
|
|
|
|
|
asm ("fnstsw" : "=a" (sw));
|
|
|
|
sw >>= 11;
|
|
|
|
sw &= 7;
|
|
|
|
|
|
|
|
if (sw != old_stack)
|
|
|
|
{
|
|
|
|
printf ("FP-Stack wrong after test %s (%d, should be %d)\n",
|
|
|
|
test_name, sw, old_stack);
|
|
|
|
++noErrors;
|
|
|
|
old_stack = sw;
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
void
|
|
|
|
print_max_error (const char *func_name)
|
|
|
|
{
|
|
|
|
int ok = 0;
|
|
|
|
|
|
|
|
if (max_error == 0.0 || (max_error <= prev_max_error && !ignore_max_ulp))
|
|
|
|
{
|
|
|
|
ok = 1;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (!ok)
|
|
|
|
print_function_ulps (func_name, max_error);
|
|
|
|
|
|
|
|
|
|
|
|
if (print_screen_max_error (ok))
|
|
|
|
{
|
|
|
|
char mestr[FSTR_MAX], pmestr[FSTR_MAX];
|
|
|
|
FTOSTR (mestr, FSTR_MAX, "%.0f", FUNC (ceil) (max_error));
|
|
|
|
FTOSTR (pmestr, FSTR_MAX, "%.0f", FUNC (ceil) (prev_max_error));
|
|
|
|
printf ("Maximal error of `%s'\n", func_name);
|
|
|
|
printf (" is : %s ulp\n", mestr);
|
|
|
|
printf (" accepted: %s ulp\n", pmestr);
|
|
|
|
}
|
|
|
|
|
|
|
|
update_stats (ok);
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
void
|
|
|
|
print_complex_max_error (const char *func_name)
|
|
|
|
{
|
|
|
|
int real_ok = 0, imag_ok = 0, ok;
|
|
|
|
|
|
|
|
if (real_max_error == 0
|
|
|
|
|| (real_max_error <= prev_real_max_error && !ignore_max_ulp))
|
|
|
|
{
|
|
|
|
real_ok = 1;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (imag_max_error == 0
|
|
|
|
|| (imag_max_error <= prev_imag_max_error && !ignore_max_ulp))
|
|
|
|
{
|
|
|
|
imag_ok = 1;
|
|
|
|
}
|
|
|
|
|
|
|
|
ok = real_ok && imag_ok;
|
|
|
|
|
|
|
|
if (!ok)
|
|
|
|
print_complex_function_ulps (func_name,
|
|
|
|
real_ok ? 0 : real_max_error,
|
|
|
|
imag_ok ? 0 : imag_max_error);
|
|
|
|
|
|
|
|
if (print_screen_max_error (ok))
|
|
|
|
{
|
|
|
|
char rmestr[FSTR_MAX], prmestr[FSTR_MAX];
|
|
|
|
char imestr[FSTR_MAX], pimestr[FSTR_MAX];
|
|
|
|
FTOSTR (rmestr, FSTR_MAX, "%.0f", FUNC (ceil) (real_max_error));
|
|
|
|
FTOSTR (prmestr, FSTR_MAX, "%.0f", FUNC (ceil) (prev_real_max_error));
|
|
|
|
FTOSTR (imestr, FSTR_MAX, "%.0f", FUNC (ceil) (imag_max_error));
|
|
|
|
FTOSTR (pimestr, FSTR_MAX, "%.0f", FUNC (ceil) (prev_imag_max_error));
|
|
|
|
printf ("Maximal error of real part of: %s\n", func_name);
|
|
|
|
printf (" is : %s ulp\n", rmestr);
|
|
|
|
printf (" accepted: %s ulp\n", prmestr);
|
|
|
|
printf ("Maximal error of imaginary part of: %s\n", func_name);
|
|
|
|
printf (" is : %s ulp\n", imestr);
|
|
|
|
printf (" accepted: %s ulp\n", pimestr);
|
|
|
|
}
|
|
|
|
|
|
|
|
update_stats (ok);
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
#if FE_ALL_EXCEPT
|
|
|
|
/* Test whether a given exception was raised. */
|
|
|
|
static void
|
|
|
|
test_single_exception (const char *test_name,
|
|
|
|
int exception,
|
|
|
|
int exc_flag,
|
|
|
|
int fe_flag,
|
|
|
|
const char *flag_name)
|
|
|
|
{
|
|
|
|
int ok = 1;
|
|
|
|
if (exception & exc_flag)
|
|
|
|
{
|
|
|
|
if (fetestexcept (fe_flag))
|
|
|
|
{
|
|
|
|
if (print_screen (1))
|
|
|
|
printf ("Pass: %s: Exception \"%s\" set\n", test_name, flag_name);
|
|
|
|
}
|
|
|
|
else
|
|
|
|
{
|
|
|
|
ok = 0;
|
|
|
|
if (print_screen (0))
|
|
|
|
printf ("Failure: %s: Exception \"%s\" not set\n",
|
|
|
|
test_name, flag_name);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
else
|
|
|
|
{
|
|
|
|
if (fetestexcept (fe_flag))
|
|
|
|
{
|
|
|
|
ok = 0;
|
|
|
|
if (print_screen (0))
|
|
|
|
printf ("Failure: %s: Exception \"%s\" set\n",
|
|
|
|
test_name, flag_name);
|
|
|
|
}
|
|
|
|
else
|
|
|
|
{
|
|
|
|
if (print_screen (1))
|
|
|
|
printf ("%s: Exception \"%s\" not set\n", test_name,
|
|
|
|
flag_name);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
if (!ok)
|
|
|
|
++noErrors;
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
|
|
|
|
/* Test whether exceptions given by EXCEPTION are raised. Ignore thereby
|
|
|
|
allowed but not required exceptions.
|
|
|
|
*/
|
|
|
|
static void
|
|
|
|
test_exceptions (const char *test_name, int exception)
|
|
|
|
{
|
|
|
|
if (flag_test_exceptions && EXCEPTION_TESTS (FLOAT))
|
|
|
|
{
|
|
|
|
++noExcTests;
|
|
|
|
#ifdef FE_DIVBYZERO
|
|
|
|
if ((exception & DIVIDE_BY_ZERO_EXCEPTION_OK) == 0)
|
|
|
|
test_single_exception (test_name, exception,
|
|
|
|
DIVIDE_BY_ZERO_EXCEPTION, FE_DIVBYZERO,
|
|
|
|
"Divide by zero");
|
|
|
|
#endif
|
|
|
|
#ifdef FE_INVALID
|
|
|
|
if ((exception & INVALID_EXCEPTION_OK) == 0)
|
|
|
|
test_single_exception (test_name, exception,
|
|
|
|
INVALID_EXCEPTION, FE_INVALID,
|
|
|
|
"Invalid operation");
|
|
|
|
#endif
|
|
|
|
#ifdef FE_OVERFLOW
|
|
|
|
if ((exception & OVERFLOW_EXCEPTION_OK) == 0)
|
|
|
|
test_single_exception (test_name, exception, OVERFLOW_EXCEPTION,
|
|
|
|
FE_OVERFLOW, "Overflow");
|
|
|
|
#endif
|
|
|
|
/* Spurious "underflow" and "inexact" exceptions are always
|
|
|
|
allowed for IBM long double, in line with the underlying
|
|
|
|
arithmetic. */
|
|
|
|
#ifdef FE_UNDERFLOW
|
|
|
|
if ((exception & UNDERFLOW_EXCEPTION_OK) == 0
|
Add test infrastructure for narrowing libm functions.
This patch continues preparations for adding TS 18661-1 narrowing libm
functions by adding the required testsuite infrastructure to test such
functions through the libm-test infrastructure.
That infrastructure is based around testing for a single type, FLOAT.
For the narrowing functions, FLOAT, the "main" type for testing, is
the function return type; the argument type is ARG_FLOAT. This is
consistent with how the code built once for each type,
libm-test-support.c, depends on FLOAT for such things as calculating
ulps errors in results but can already handle different argument types
(pointers, integers, long double for nexttoward).
Makefile machinery is added to handle building tests for all pairs of
types for which there are narrowing functions (as with non-narrowing
functions, aliases are tested just the same as the functions they
alias). gen-auto-libm-tests gains a --narrow option for building
outputs for narrowing functions (so narrowing sqrt and fma will share
the same inputs as non-narrowing, but gen-auto-libm-tests will be run
with and without that option to generate different output files). In
the narrowing case, the auto-libm-test-out-narrow-* files include
annotations for each test about what properties ARG_FLOAT must have to
be able to represent all the inputs for that test; those annotations
result in calls to the TEST_COND_arg_fmt macro.
gen-libm-test.pl has some minor updates to handle narrowing tests (for
example, arguments in such tests must be surrounded by ARG_LIT calls
instead of LIT calls). Various new macros are added to the C test
support code (for example, sNaN initializers need to be properly
typed, so arg_snan_value is added; other such arg_* macros are added
as it seems cleanest to do so, though some are not strictly required).
Special-casing of the ibm128 format to allow for its limitations is
adjusted to handle it as the argument format as well as as the result
format; thus, the tests of the new functions allow nonzero ulps only
in the case where ibm128 is the argument format, as otherwise the
functions correspond to fully-defined IEEE operations. The ulps in
question appear as e.g. 'Function: "add_ldouble"' in libm-test-ulps
(with 1ulp errors then listed for double and float for that function
in powerpc); no support is added to generate corresponding faddl /
daddl ulps listings in the ulps table in the manual.
For the previous patch, I noted the need to avoid spurious macro
expansions of identifiers such as "add". A test test-narrow-macros.c
is added to verify such macro expansions are successfully avoided, and
there is also a -mlong-double-64 version of that test for ldbl-opt.
This test is set up to cover the full set of relevant identifiers from
the start rather than adding functions one at a time as each function
group is added.
Tested for x86_64 (this patch in isolation, as well as testing for
various configurations in conjunction with the actual addition of
"add" functions).
* math/Makefile (test-type-pairs): New variable.
(test-type-pairs-f64xf128-yes): Likewise.
(tests): Add test-narrow-macros.
(libm-test-funcs-narrow): New variable.
(libm-test-c-narrow): Likewise.
(generated): Add $(libm-test-c-narrow).
(libm-tests-base-narrow): New variable.
(libm-tests-narrow): Likewise.
(libm-tests): Add $(libm-tests-narrow).
(libm-tests-for-type): Handle $(libm-tests-narrow).
(libm-test-c-narrow-obj): New variable.
($(libm-test-c-narrow-obj)): New rule.
($(foreach t,$(libm-tests-narrow),$(objpfx)$(t).c)): Likewise.
($(foreach f,$(libm-test-funcs-narrow),$(objpfx)$(o)-$(f).o)): Use
$(o-iterator) to set dependencies and CFLAGS.
* math/gen-auto-libm-tests.c: Document use for narrowing
functions.
(output_for_one_input_case): Take argument NARROW.
(generate_output): Likewise. Update call to
output_for_one_input_case.
(main): Take --narrow option. Update call to generate_output.
* math/gen-libm-test.pl (_apply_lit): Take macro name as argument.
(apply_lit): Update call to _apply_lit.
(apply_arglit): New function.
(parse_args): Handle "a" arguments.
(parse_auto_input): Handle format names using ":".
* math/README.libm-test: Document "a" parameter type.
* math/libm-test-support.h (ARG_TYPE_MIN): New macro.
(ARG_TYPE_TRUE_MIN): Likewise.
(ARG_TYPE_MAX): Likwise.
(ARG_MIN_EXP): Likewise.
(ARG_MAX_EXP): Likewise.
(ARG_MANT_DIG): Likewise.
(TEST_COND_arg_ibm128): Likewise.
(TEST_COND_ibm128_libgcc): Define conditional on [ARG_FLOAT].
(TEST_COND_arg_fmt): New macro.
(init_max_error): Update prototype.
* math/libm-test-support.c (test_ibm128): New variable.
(init_max_error): Take argument testing_ibm128 and set test_ibm128
instead of using [TEST_COND_ibm128] conditional.
(test_exceptions): Use test_ibm128 instead of TEST_COND_ibm128.
* math/libm-test-driver.c (STR_ARG_FLOAT): New macro.
[TEST_NARROW] (TEST_MSG): New definition.
(arg_plus_zero): New macro.
(arg_minus_zero): Likewise.
(arg_plus_infty): Likewise.
(arg_minus_infty): Likewise.
(arg_qnan_value_pl): Likewise.
(arg_qnan_value): Likewise.
(arg_snan_value_pl): Likewise.
(arg_snan_value): Likewise.
(arg_max_value): Likewise.
(arg_min_value): Likewise.
(arg_min_subnorm_value): Likewise.
[ARG_FLOAT] (struct test_aa_f_data): New struct type.
(RUN_TEST_LOOP_aa_f): New macro.
(TEST_SUFF): New macro.
(TEST_SUFF_STR): Likewise.
[!TEST_MATHVEC] (VEC_SUFF): Don't define.
(TEST_COND_any_ibm128): New macro.
(START): Use TEST_SUFF and TEST_SUFF_STR in initializer for
this_func. Update call to init_max_error.
* math/test-double.h (FUNC_NARROW_PREFIX): New macro.
* math/test-float.h (FUNC_NARROW_PREFIX): Likewise.
* math/test-float128.h (FUNC_NARROW_PREFIX): Likewise.
* math/test-float32.h (FUNC_NARROW_PREFIX): Likewise.
* math/test-float32x.h (FUNC_NARROW_PREFIX): Likewise.
* math/test-float64.h (FUNC_NARROW_PREFIX): Likewise.
* math/test-float64x.h (FUNC_NARROW_PREFIX): Likewise.
* math/test-math-scalar.h (TEST_NARROW): Likewise.
* math/test-math-vector.h (TEST_NARROW): Likewise.
* math/test-arg-double.h: New file.
* math/test-arg-float128.h: Likewise.
* math/test-arg-float32x.h: Likewise.
* math/test-arg-float64.h: Likewise.
* math/test-arg-float64x.h: Likewise.
* math/test-arg-ldouble.h: Likewise.
* math/test-math-narrow.h: Likewise.
* math/test-narrow-macros.c: Likewise.
* sysdeps/ieee754/ldbl-opt/test-narrow-macros-ldbl-64.c: Likewise.
* sysdeps/ieee754/ldbl-opt/Makefile (tests): Add
test-narrow-macros-ldbl-64.
(CFLAGS-test-narrow-macros-ldbl-64.c): New variable.
2018-02-09 21:55:48 +00:00
|
|
|
&& !(test_ibm128
|
Build most libm-test support code once per type.
libm-test-driver.c contains various functions used in the course of
libm testing, which are built as part of each test using this
machinery.
Currently, these functions get built for three tests for each type
(e.g. test-float, test-ifloat, test-float-finite), plus the vector
function tests. All these tests are huge and thus slow to build; the
output of gen-libm-test.pl totals around 40 MB across all functions.
To make the individual tests built from the Makefile smaller, it makes
sense to split these tests up so the tests for each function are built
separately (thus, three tests for each (function, type) pair, plus
vector tests built only for functions that actually have vector
versions). This improves parallelism and means that if tests fail,
the summary of failed tests makes it more obvious where the problem
might be without needing to look in the .out files to see which
functions' tests failed (though architecture maintainers still need to
keep libm-test-ulps up to date to avoid spurious failures of little
interest).
Simply including libm-test-driver.c as-is in such individual-function
tests does not work because of unused static check_* functions (those
functions only being used for the types of the outputs of the function
under test). It also means the common code gets built over 1000 times
instead of nine (plus vector tests). To avoid that issue, this patch
splits out the bulk of the libm-test-driver.c code into a separate
file libm-test-support.c (with a few functions made non-static). That
separate file is built only once for each floating-point type (so at
present three times, or twice on architectures with long double =
double). Definitions needed in both libm-test-support.c and
libm-test-driver.c go in libm-test-support.h (it's possible some of
those are in fact only needed in one of the two files).
libm-test-driver.c keeps definitions of a limited number of variables
used to configure how libm-test-support.c behaves, various macros and
structures needed by individual-function tests, and the main function.
This move is also consistent in spirit with the move away from
test-skeleton.c having all the test support code, to a small
support/test-driver.c included in individual tests with most of the
code built separately.
Tested for x86_64 and x86.
* math/libm-test-support.c: New file. Content from
math/libm-test-driver.c.
* math/libm-test-support.h: Likewise.
* math/libm-test-support-double.c: New file.
* math/libm-test-support-float.c: Likewise.
* math/libm-test-support-ldouble.c: Likewise.
* math/libm-test-driver.c: Remove main comment and header
includes. Include libm-test-support.h.
[!_GNU_SOURCE] (_GNU_SOURCE): Do not define.
(flag_test_errno): Remove static.
(flag_test_exceptions): Likewise.
(flag_test_finite): Likewise.
(flag_test_inline): Likewise.
(flag_test_mathvec): Likewise.
(test_msg): Likewise.
(NO_EXCEPTION): Remove.
(INVALID_EXCEPTION): Likewise.
(DIVIDE_BY_ZERO_EXCEPTION): Likewise.
(OVERFLOW_EXCEPTION): Likewise.
(UNDERFLOW_EXCEPTION): Likewise.
(INEXACT_EXCEPTION): Likewise.
(INVALID_EXCEPTION_OK): Likewise.
(DIVIDE_BY_ZERO_EXCEPTION_OK): Likewise.
(OVERFLOW_EXCEPTION_OK): Likewise.
(UNDERFLOW_EXCEPTION_OK): Likewise.
(NO_INEXACT_EXCEPTION): Likewise.
(EXCEPTIONS_OK): Likewise.
(IGNORE_ZERO_INF_SIGN): Likewise.
(TEST_NAN_SIGN): Likewise.
(TEST_NAN_PAYLOAD): Likewise.
(NO_TEST_INLINE): Likewise.
(XFAIL_TEST): Likewise.
(ERRNO_UNCHANGED): Likewise.
(ERRNO_EDOM): Likewise.
(ERRNO_ERANGE): Likewise.
(IGNORE_RESULT): Likewise.
(NON_FINITE): Likewise.
(TEST_SNAN): Likewise.
(NO_TEST_MATHVEC): Likewise.
(__CONCATX): Likewise.
(TYPE_MIN): Likewise.
(TYPE_TRUE_MIN): Likewise.
(TYPE_MAX): Likewise.
(MIN_EXP): Likewise.
(MAX_EXP): Likewise.
(MANT_DIG): Likewise.
(FSTR_MAX): Likewise.
(ulp_idx): Likewise.
(qtype_str): Remove static.
(TEST_COND_binary32): Remove.
(TEST_COND_binary64): Likewise.
(TEST_COND_binary128): Likewise.
(TEST_COND_ibm128): Likewise.
(TEST_COND_intel96): Likewise.
(TEST_COND_m68k96): Likewise.
(TEST_COND_ibm128_libgcc): Likewise.
(XFAIL_IBM128_LIBGCC): Likewise.
(PAYLOAD_DIG): Likewise.
(UNDERFLOW_EXCEPTION_FLOAT): Likewise.
(UNDERFLOW_EXCEPTION_OK_FLOAT): Likewise.
(UNDERFLOW_EXCEPTION_DOUBLE): Likewise.
(UNDERFLOW_EXCEPTION_OK_DOUBLE): Likewise.
(UNDERFLOW_EXCEPTION_LDOUBLE_IBM): Likewise.
(UNDERFLOW_EXCEPTION_BEFORE_ROUNDING): Likewise.
(TEST_COND_long32): Likewise.
(TEST_COND_long64): Likewise.
(TEST_COND_before_rounding): Likewise.
(TEST_COND_after_rounding): Likewise.
(ulps_file_name): Likewise.
(ulps_file): Likewise.
(output_ulps): Likewise.
(output_dir): Likewise.
(noErrors): Likewise.
(noTests): Likewise.
(noExcTests): Likewise.
(noErrnoTests): Likewise.
(verbose): Likewise.
(output_max_error): Likewise.
(output_points): Likewise.
(ignore_max_ulp): Likewise.
(max_error): Likewise.
(real_max_error): Likewise.
(imag_max_error): Likewise.
(prev_max_error): Likewise.
(prev_real_max_error): Likewise.
(prev_imag_max_error): Likewise.
(max_valid_error): Likewise.
(TYPE_DECIMAL_DIG): Likewise.
(TYPE_HEX_DIG): Likewise.
(fmt_ftostr): Likewise.
(compare_ulp_data): Likewise.
(find_ulps): Likewise.
(init_max_error): Likewise.
(set_max_error): Likewise.
(print_float): Likewise.
(print_screen): Likewise.
(print_screen_max_error): Likewise.
(update_stats): Likewise.
(print_function_ulps): Likewise.
(print_complex_function_ulps): Likewise.
(fpstack_test): Likewise.
(print_max_error): Likewise.
(print_complex_max_error): Likewise.
(test_single_exception): Likewise.
(test_exceptions): Likewise.
(test_single_errno): Likewise.
(test_errno): Likewise.
(ULPDIFF): Likewise.
(ulp): Likewise.
(check_float_internal): Likewise.
(check_float): Likewise.
(check_complex): Likewise.
(check_int): Likewise.
(check_long): Likewise.
(check_bool): Likewise.
(check_longlong): Likewise.
(check_intmax_t): Likewise.
(check_uintmax_t): Likewise.
(enable_test): Likewise.
(matherr): Likewise.
(initialize): Likewise.
(options): Likewise.
(doc): Remove static.
(argp): Likewise.
(parse_opt): Remove.
(check_ulp): Likewise.
(libm_test_init): Likewise.
(libm_test_finish): Likewise.
* math/Makefile (libm-test-support): New variable.
(test-extras): Add libm-test-support files.
(extra-test-objs): Likewise.
(CFLAGS-libm-test-support-float.c): New variable.
(CFLAGS-libm-test-support-double.c): Likewise.
(CFLAGS-libm-test-support-ldouble.c): Likewise.
($(addprefix $(objpfx),$(libm-tests)): Depend on appropriate
libm-test-support objects.
2017-02-08 21:11:49 +00:00
|
|
|
&& (exception & UNDERFLOW_EXCEPTION) == 0))
|
|
|
|
test_single_exception (test_name, exception, UNDERFLOW_EXCEPTION,
|
|
|
|
FE_UNDERFLOW, "Underflow");
|
|
|
|
#endif
|
|
|
|
#ifdef FE_INEXACT
|
|
|
|
if ((exception & (INEXACT_EXCEPTION | NO_INEXACT_EXCEPTION)) != 0
|
Add test infrastructure for narrowing libm functions.
This patch continues preparations for adding TS 18661-1 narrowing libm
functions by adding the required testsuite infrastructure to test such
functions through the libm-test infrastructure.
That infrastructure is based around testing for a single type, FLOAT.
For the narrowing functions, FLOAT, the "main" type for testing, is
the function return type; the argument type is ARG_FLOAT. This is
consistent with how the code built once for each type,
libm-test-support.c, depends on FLOAT for such things as calculating
ulps errors in results but can already handle different argument types
(pointers, integers, long double for nexttoward).
Makefile machinery is added to handle building tests for all pairs of
types for which there are narrowing functions (as with non-narrowing
functions, aliases are tested just the same as the functions they
alias). gen-auto-libm-tests gains a --narrow option for building
outputs for narrowing functions (so narrowing sqrt and fma will share
the same inputs as non-narrowing, but gen-auto-libm-tests will be run
with and without that option to generate different output files). In
the narrowing case, the auto-libm-test-out-narrow-* files include
annotations for each test about what properties ARG_FLOAT must have to
be able to represent all the inputs for that test; those annotations
result in calls to the TEST_COND_arg_fmt macro.
gen-libm-test.pl has some minor updates to handle narrowing tests (for
example, arguments in such tests must be surrounded by ARG_LIT calls
instead of LIT calls). Various new macros are added to the C test
support code (for example, sNaN initializers need to be properly
typed, so arg_snan_value is added; other such arg_* macros are added
as it seems cleanest to do so, though some are not strictly required).
Special-casing of the ibm128 format to allow for its limitations is
adjusted to handle it as the argument format as well as as the result
format; thus, the tests of the new functions allow nonzero ulps only
in the case where ibm128 is the argument format, as otherwise the
functions correspond to fully-defined IEEE operations. The ulps in
question appear as e.g. 'Function: "add_ldouble"' in libm-test-ulps
(with 1ulp errors then listed for double and float for that function
in powerpc); no support is added to generate corresponding faddl /
daddl ulps listings in the ulps table in the manual.
For the previous patch, I noted the need to avoid spurious macro
expansions of identifiers such as "add". A test test-narrow-macros.c
is added to verify such macro expansions are successfully avoided, and
there is also a -mlong-double-64 version of that test for ldbl-opt.
This test is set up to cover the full set of relevant identifiers from
the start rather than adding functions one at a time as each function
group is added.
Tested for x86_64 (this patch in isolation, as well as testing for
various configurations in conjunction with the actual addition of
"add" functions).
* math/Makefile (test-type-pairs): New variable.
(test-type-pairs-f64xf128-yes): Likewise.
(tests): Add test-narrow-macros.
(libm-test-funcs-narrow): New variable.
(libm-test-c-narrow): Likewise.
(generated): Add $(libm-test-c-narrow).
(libm-tests-base-narrow): New variable.
(libm-tests-narrow): Likewise.
(libm-tests): Add $(libm-tests-narrow).
(libm-tests-for-type): Handle $(libm-tests-narrow).
(libm-test-c-narrow-obj): New variable.
($(libm-test-c-narrow-obj)): New rule.
($(foreach t,$(libm-tests-narrow),$(objpfx)$(t).c)): Likewise.
($(foreach f,$(libm-test-funcs-narrow),$(objpfx)$(o)-$(f).o)): Use
$(o-iterator) to set dependencies and CFLAGS.
* math/gen-auto-libm-tests.c: Document use for narrowing
functions.
(output_for_one_input_case): Take argument NARROW.
(generate_output): Likewise. Update call to
output_for_one_input_case.
(main): Take --narrow option. Update call to generate_output.
* math/gen-libm-test.pl (_apply_lit): Take macro name as argument.
(apply_lit): Update call to _apply_lit.
(apply_arglit): New function.
(parse_args): Handle "a" arguments.
(parse_auto_input): Handle format names using ":".
* math/README.libm-test: Document "a" parameter type.
* math/libm-test-support.h (ARG_TYPE_MIN): New macro.
(ARG_TYPE_TRUE_MIN): Likewise.
(ARG_TYPE_MAX): Likwise.
(ARG_MIN_EXP): Likewise.
(ARG_MAX_EXP): Likewise.
(ARG_MANT_DIG): Likewise.
(TEST_COND_arg_ibm128): Likewise.
(TEST_COND_ibm128_libgcc): Define conditional on [ARG_FLOAT].
(TEST_COND_arg_fmt): New macro.
(init_max_error): Update prototype.
* math/libm-test-support.c (test_ibm128): New variable.
(init_max_error): Take argument testing_ibm128 and set test_ibm128
instead of using [TEST_COND_ibm128] conditional.
(test_exceptions): Use test_ibm128 instead of TEST_COND_ibm128.
* math/libm-test-driver.c (STR_ARG_FLOAT): New macro.
[TEST_NARROW] (TEST_MSG): New definition.
(arg_plus_zero): New macro.
(arg_minus_zero): Likewise.
(arg_plus_infty): Likewise.
(arg_minus_infty): Likewise.
(arg_qnan_value_pl): Likewise.
(arg_qnan_value): Likewise.
(arg_snan_value_pl): Likewise.
(arg_snan_value): Likewise.
(arg_max_value): Likewise.
(arg_min_value): Likewise.
(arg_min_subnorm_value): Likewise.
[ARG_FLOAT] (struct test_aa_f_data): New struct type.
(RUN_TEST_LOOP_aa_f): New macro.
(TEST_SUFF): New macro.
(TEST_SUFF_STR): Likewise.
[!TEST_MATHVEC] (VEC_SUFF): Don't define.
(TEST_COND_any_ibm128): New macro.
(START): Use TEST_SUFF and TEST_SUFF_STR in initializer for
this_func. Update call to init_max_error.
* math/test-double.h (FUNC_NARROW_PREFIX): New macro.
* math/test-float.h (FUNC_NARROW_PREFIX): Likewise.
* math/test-float128.h (FUNC_NARROW_PREFIX): Likewise.
* math/test-float32.h (FUNC_NARROW_PREFIX): Likewise.
* math/test-float32x.h (FUNC_NARROW_PREFIX): Likewise.
* math/test-float64.h (FUNC_NARROW_PREFIX): Likewise.
* math/test-float64x.h (FUNC_NARROW_PREFIX): Likewise.
* math/test-math-scalar.h (TEST_NARROW): Likewise.
* math/test-math-vector.h (TEST_NARROW): Likewise.
* math/test-arg-double.h: New file.
* math/test-arg-float128.h: Likewise.
* math/test-arg-float32x.h: Likewise.
* math/test-arg-float64.h: Likewise.
* math/test-arg-float64x.h: Likewise.
* math/test-arg-ldouble.h: Likewise.
* math/test-math-narrow.h: Likewise.
* math/test-narrow-macros.c: Likewise.
* sysdeps/ieee754/ldbl-opt/test-narrow-macros-ldbl-64.c: Likewise.
* sysdeps/ieee754/ldbl-opt/Makefile (tests): Add
test-narrow-macros-ldbl-64.
(CFLAGS-test-narrow-macros-ldbl-64.c): New variable.
2018-02-09 21:55:48 +00:00
|
|
|
&& !(test_ibm128
|
Build most libm-test support code once per type.
libm-test-driver.c contains various functions used in the course of
libm testing, which are built as part of each test using this
machinery.
Currently, these functions get built for three tests for each type
(e.g. test-float, test-ifloat, test-float-finite), plus the vector
function tests. All these tests are huge and thus slow to build; the
output of gen-libm-test.pl totals around 40 MB across all functions.
To make the individual tests built from the Makefile smaller, it makes
sense to split these tests up so the tests for each function are built
separately (thus, three tests for each (function, type) pair, plus
vector tests built only for functions that actually have vector
versions). This improves parallelism and means that if tests fail,
the summary of failed tests makes it more obvious where the problem
might be without needing to look in the .out files to see which
functions' tests failed (though architecture maintainers still need to
keep libm-test-ulps up to date to avoid spurious failures of little
interest).
Simply including libm-test-driver.c as-is in such individual-function
tests does not work because of unused static check_* functions (those
functions only being used for the types of the outputs of the function
under test). It also means the common code gets built over 1000 times
instead of nine (plus vector tests). To avoid that issue, this patch
splits out the bulk of the libm-test-driver.c code into a separate
file libm-test-support.c (with a few functions made non-static). That
separate file is built only once for each floating-point type (so at
present three times, or twice on architectures with long double =
double). Definitions needed in both libm-test-support.c and
libm-test-driver.c go in libm-test-support.h (it's possible some of
those are in fact only needed in one of the two files).
libm-test-driver.c keeps definitions of a limited number of variables
used to configure how libm-test-support.c behaves, various macros and
structures needed by individual-function tests, and the main function.
This move is also consistent in spirit with the move away from
test-skeleton.c having all the test support code, to a small
support/test-driver.c included in individual tests with most of the
code built separately.
Tested for x86_64 and x86.
* math/libm-test-support.c: New file. Content from
math/libm-test-driver.c.
* math/libm-test-support.h: Likewise.
* math/libm-test-support-double.c: New file.
* math/libm-test-support-float.c: Likewise.
* math/libm-test-support-ldouble.c: Likewise.
* math/libm-test-driver.c: Remove main comment and header
includes. Include libm-test-support.h.
[!_GNU_SOURCE] (_GNU_SOURCE): Do not define.
(flag_test_errno): Remove static.
(flag_test_exceptions): Likewise.
(flag_test_finite): Likewise.
(flag_test_inline): Likewise.
(flag_test_mathvec): Likewise.
(test_msg): Likewise.
(NO_EXCEPTION): Remove.
(INVALID_EXCEPTION): Likewise.
(DIVIDE_BY_ZERO_EXCEPTION): Likewise.
(OVERFLOW_EXCEPTION): Likewise.
(UNDERFLOW_EXCEPTION): Likewise.
(INEXACT_EXCEPTION): Likewise.
(INVALID_EXCEPTION_OK): Likewise.
(DIVIDE_BY_ZERO_EXCEPTION_OK): Likewise.
(OVERFLOW_EXCEPTION_OK): Likewise.
(UNDERFLOW_EXCEPTION_OK): Likewise.
(NO_INEXACT_EXCEPTION): Likewise.
(EXCEPTIONS_OK): Likewise.
(IGNORE_ZERO_INF_SIGN): Likewise.
(TEST_NAN_SIGN): Likewise.
(TEST_NAN_PAYLOAD): Likewise.
(NO_TEST_INLINE): Likewise.
(XFAIL_TEST): Likewise.
(ERRNO_UNCHANGED): Likewise.
(ERRNO_EDOM): Likewise.
(ERRNO_ERANGE): Likewise.
(IGNORE_RESULT): Likewise.
(NON_FINITE): Likewise.
(TEST_SNAN): Likewise.
(NO_TEST_MATHVEC): Likewise.
(__CONCATX): Likewise.
(TYPE_MIN): Likewise.
(TYPE_TRUE_MIN): Likewise.
(TYPE_MAX): Likewise.
(MIN_EXP): Likewise.
(MAX_EXP): Likewise.
(MANT_DIG): Likewise.
(FSTR_MAX): Likewise.
(ulp_idx): Likewise.
(qtype_str): Remove static.
(TEST_COND_binary32): Remove.
(TEST_COND_binary64): Likewise.
(TEST_COND_binary128): Likewise.
(TEST_COND_ibm128): Likewise.
(TEST_COND_intel96): Likewise.
(TEST_COND_m68k96): Likewise.
(TEST_COND_ibm128_libgcc): Likewise.
(XFAIL_IBM128_LIBGCC): Likewise.
(PAYLOAD_DIG): Likewise.
(UNDERFLOW_EXCEPTION_FLOAT): Likewise.
(UNDERFLOW_EXCEPTION_OK_FLOAT): Likewise.
(UNDERFLOW_EXCEPTION_DOUBLE): Likewise.
(UNDERFLOW_EXCEPTION_OK_DOUBLE): Likewise.
(UNDERFLOW_EXCEPTION_LDOUBLE_IBM): Likewise.
(UNDERFLOW_EXCEPTION_BEFORE_ROUNDING): Likewise.
(TEST_COND_long32): Likewise.
(TEST_COND_long64): Likewise.
(TEST_COND_before_rounding): Likewise.
(TEST_COND_after_rounding): Likewise.
(ulps_file_name): Likewise.
(ulps_file): Likewise.
(output_ulps): Likewise.
(output_dir): Likewise.
(noErrors): Likewise.
(noTests): Likewise.
(noExcTests): Likewise.
(noErrnoTests): Likewise.
(verbose): Likewise.
(output_max_error): Likewise.
(output_points): Likewise.
(ignore_max_ulp): Likewise.
(max_error): Likewise.
(real_max_error): Likewise.
(imag_max_error): Likewise.
(prev_max_error): Likewise.
(prev_real_max_error): Likewise.
(prev_imag_max_error): Likewise.
(max_valid_error): Likewise.
(TYPE_DECIMAL_DIG): Likewise.
(TYPE_HEX_DIG): Likewise.
(fmt_ftostr): Likewise.
(compare_ulp_data): Likewise.
(find_ulps): Likewise.
(init_max_error): Likewise.
(set_max_error): Likewise.
(print_float): Likewise.
(print_screen): Likewise.
(print_screen_max_error): Likewise.
(update_stats): Likewise.
(print_function_ulps): Likewise.
(print_complex_function_ulps): Likewise.
(fpstack_test): Likewise.
(print_max_error): Likewise.
(print_complex_max_error): Likewise.
(test_single_exception): Likewise.
(test_exceptions): Likewise.
(test_single_errno): Likewise.
(test_errno): Likewise.
(ULPDIFF): Likewise.
(ulp): Likewise.
(check_float_internal): Likewise.
(check_float): Likewise.
(check_complex): Likewise.
(check_int): Likewise.
(check_long): Likewise.
(check_bool): Likewise.
(check_longlong): Likewise.
(check_intmax_t): Likewise.
(check_uintmax_t): Likewise.
(enable_test): Likewise.
(matherr): Likewise.
(initialize): Likewise.
(options): Likewise.
(doc): Remove static.
(argp): Likewise.
(parse_opt): Remove.
(check_ulp): Likewise.
(libm_test_init): Likewise.
(libm_test_finish): Likewise.
* math/Makefile (libm-test-support): New variable.
(test-extras): Add libm-test-support files.
(extra-test-objs): Likewise.
(CFLAGS-libm-test-support-float.c): New variable.
(CFLAGS-libm-test-support-double.c): Likewise.
(CFLAGS-libm-test-support-ldouble.c): Likewise.
($(addprefix $(objpfx),$(libm-tests)): Depend on appropriate
libm-test-support objects.
2017-02-08 21:11:49 +00:00
|
|
|
&& (exception & NO_INEXACT_EXCEPTION) != 0))
|
|
|
|
test_single_exception (test_name, exception, INEXACT_EXCEPTION,
|
|
|
|
FE_INEXACT, "Inexact");
|
|
|
|
#endif
|
|
|
|
}
|
|
|
|
feclearexcept (FE_ALL_EXCEPT);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Test whether errno for TEST_NAME, set to ERRNO_VALUE, has value
|
|
|
|
EXPECTED_VALUE (description EXPECTED_NAME). */
|
|
|
|
static void
|
|
|
|
test_single_errno (const char *test_name, int errno_value,
|
|
|
|
int expected_value, const char *expected_name)
|
|
|
|
{
|
|
|
|
if (errno_value == expected_value)
|
|
|
|
{
|
|
|
|
if (print_screen (1))
|
|
|
|
printf ("Pass: %s: errno set to %d (%s)\n", test_name, errno_value,
|
|
|
|
expected_name);
|
|
|
|
}
|
|
|
|
else
|
|
|
|
{
|
|
|
|
++noErrors;
|
|
|
|
if (print_screen (0))
|
|
|
|
printf ("Failure: %s: errno set to %d, expected %d (%s)\n",
|
|
|
|
test_name, errno_value, expected_value, expected_name);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Test whether errno (value ERRNO_VALUE) has been for TEST_NAME set
|
|
|
|
as required by EXCEPTIONS. */
|
|
|
|
static void
|
|
|
|
test_errno (const char *test_name, int errno_value, int exceptions)
|
|
|
|
{
|
|
|
|
if (flag_test_errno)
|
|
|
|
{
|
|
|
|
++noErrnoTests;
|
|
|
|
if (exceptions & ERRNO_UNCHANGED)
|
|
|
|
test_single_errno (test_name, errno_value, 0, "unchanged");
|
|
|
|
if (exceptions & ERRNO_EDOM)
|
|
|
|
test_single_errno (test_name, errno_value, EDOM, "EDOM");
|
|
|
|
if (exceptions & ERRNO_ERANGE)
|
|
|
|
test_single_errno (test_name, errno_value, ERANGE, "ERANGE");
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Returns the number of ulps that GIVEN is away from EXPECTED. */
|
|
|
|
#define ULPDIFF(given, expected) \
|
|
|
|
(FUNC(fabs) ((given) - (expected)) / ulp (expected))
|
|
|
|
|
|
|
|
/* Returns the size of an ulp for VALUE. */
|
|
|
|
static FLOAT
|
|
|
|
ulp (FLOAT value)
|
|
|
|
{
|
|
|
|
FLOAT ulp;
|
|
|
|
|
|
|
|
switch (fpclassify (value))
|
|
|
|
{
|
|
|
|
case FP_ZERO:
|
|
|
|
/* We compute the distance to the next FP which is the same as the
|
|
|
|
value of the smallest subnormal number. Previously we used
|
|
|
|
2^-(MANT_DIG - 1) which is too large a value to be useful. Note that we
|
|
|
|
can't use ilogb(0), since that isn't a valid thing to do. As a point
|
|
|
|
of comparison Java's ulp returns the next normal value e.g.
|
|
|
|
2^(1 - MAX_EXP) for ulp(0), but that is not what we want for
|
|
|
|
glibc. */
|
|
|
|
/* Fall through... */
|
|
|
|
case FP_SUBNORMAL:
|
|
|
|
/* The next closest subnormal value is a constant distance away. */
|
|
|
|
ulp = FUNC(ldexp) (1.0, MIN_EXP - MANT_DIG);
|
|
|
|
break;
|
|
|
|
|
|
|
|
case FP_NORMAL:
|
|
|
|
ulp = FUNC(ldexp) (1.0, FUNC(ilogb) (value) - MANT_DIG + 1);
|
|
|
|
break;
|
|
|
|
|
|
|
|
default:
|
|
|
|
/* It should never happen. */
|
|
|
|
abort ();
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
return ulp;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
check_float_internal (const char *test_name, FLOAT computed, FLOAT expected,
|
|
|
|
int exceptions,
|
|
|
|
FLOAT *curr_max_error, FLOAT max_ulp)
|
|
|
|
{
|
|
|
|
int ok = 0;
|
|
|
|
int print_diff = 0;
|
|
|
|
FLOAT diff = 0;
|
|
|
|
FLOAT ulps = 0;
|
|
|
|
int errno_value = errno;
|
|
|
|
|
|
|
|
test_exceptions (test_name, exceptions);
|
|
|
|
test_errno (test_name, errno_value, exceptions);
|
|
|
|
if (exceptions & IGNORE_RESULT)
|
|
|
|
goto out;
|
|
|
|
if (issignaling (computed) && issignaling (expected))
|
|
|
|
{
|
|
|
|
if ((exceptions & TEST_NAN_SIGN) != 0
|
|
|
|
&& signbit (computed) != signbit (expected))
|
|
|
|
{
|
|
|
|
ok = 0;
|
|
|
|
printf ("signaling NaN has wrong sign.\n");
|
|
|
|
}
|
|
|
|
else if ((exceptions & TEST_NAN_PAYLOAD) != 0
|
|
|
|
&& (FUNC (getpayload) (&computed)
|
|
|
|
!= FUNC (getpayload) (&expected)))
|
|
|
|
{
|
|
|
|
ok = 0;
|
|
|
|
printf ("signaling NaN has wrong payload.\n");
|
|
|
|
}
|
|
|
|
else
|
|
|
|
ok = 1;
|
|
|
|
}
|
|
|
|
else if (issignaling (computed) || issignaling (expected))
|
|
|
|
ok = 0;
|
|
|
|
else if (isnan (computed) && isnan (expected))
|
|
|
|
{
|
|
|
|
if ((exceptions & TEST_NAN_SIGN) != 0
|
|
|
|
&& signbit (computed) != signbit (expected))
|
|
|
|
{
|
|
|
|
ok = 0;
|
|
|
|
printf ("quiet NaN has wrong sign.\n");
|
|
|
|
}
|
|
|
|
else if ((exceptions & TEST_NAN_PAYLOAD) != 0
|
|
|
|
&& (FUNC (getpayload) (&computed)
|
|
|
|
!= FUNC (getpayload) (&expected)))
|
|
|
|
{
|
|
|
|
ok = 0;
|
|
|
|
printf ("quiet NaN has wrong payload.\n");
|
|
|
|
}
|
|
|
|
else
|
|
|
|
ok = 1;
|
|
|
|
}
|
|
|
|
else if (isinf (computed) && isinf (expected))
|
|
|
|
{
|
|
|
|
/* Test for sign of infinities. */
|
|
|
|
if ((exceptions & IGNORE_ZERO_INF_SIGN) == 0
|
|
|
|
&& signbit (computed) != signbit (expected))
|
|
|
|
{
|
|
|
|
ok = 0;
|
|
|
|
printf ("infinity has wrong sign.\n");
|
|
|
|
}
|
|
|
|
else
|
|
|
|
ok = 1;
|
|
|
|
}
|
|
|
|
/* Don't calculate ULPs for infinities or any kind of NaNs. */
|
|
|
|
else if (isinf (computed) || isnan (computed)
|
|
|
|
|| isinf (expected) || isnan (expected))
|
|
|
|
ok = 0;
|
|
|
|
else
|
|
|
|
{
|
|
|
|
diff = FUNC(fabs) (computed - expected);
|
|
|
|
ulps = ULPDIFF (computed, expected);
|
|
|
|
set_max_error (ulps, curr_max_error);
|
|
|
|
print_diff = 1;
|
|
|
|
if ((exceptions & IGNORE_ZERO_INF_SIGN) == 0
|
|
|
|
&& computed == 0.0 && expected == 0.0
|
|
|
|
&& signbit(computed) != signbit (expected))
|
|
|
|
ok = 0;
|
|
|
|
else if (ulps <= max_ulp && !ignore_max_ulp)
|
|
|
|
ok = 1;
|
|
|
|
else
|
|
|
|
ok = 0;
|
|
|
|
}
|
|
|
|
if (print_screen (ok))
|
|
|
|
{
|
|
|
|
if (!ok)
|
|
|
|
printf ("Failure: ");
|
|
|
|
printf ("Test: %s\n", test_name);
|
|
|
|
printf ("Result:\n");
|
|
|
|
printf (" is: ");
|
|
|
|
print_float (computed);
|
|
|
|
printf (" should be: ");
|
|
|
|
print_float (expected);
|
|
|
|
if (print_diff)
|
|
|
|
{
|
|
|
|
char dstrn[FSTR_MAX], dstrx[FSTR_MAX];
|
|
|
|
char ustrn[FSTR_MAX], mustrn[FSTR_MAX];
|
|
|
|
fmt_ftostr (dstrn, FSTR_MAX, TYPE_DECIMAL_DIG - 1, "e", diff);
|
|
|
|
fmt_ftostr (dstrx, FSTR_MAX, TYPE_HEX_DIG - 1, "a", diff);
|
|
|
|
fmt_ftostr (ustrn, FSTR_MAX, 4, "f", ulps);
|
|
|
|
fmt_ftostr (mustrn, FSTR_MAX, 4, "f", max_ulp);
|
|
|
|
printf (" difference: %s %s\n", dstrn, dstrx);
|
|
|
|
printf (" ulp : %s\n", ustrn);
|
|
|
|
printf (" max.ulp : %s\n", mustrn);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
update_stats (ok);
|
|
|
|
|
|
|
|
out:
|
|
|
|
fpstack_test (test_name);
|
2017-06-23 20:10:45 +00:00
|
|
|
feclearexcept (FE_ALL_EXCEPT);
|
Build most libm-test support code once per type.
libm-test-driver.c contains various functions used in the course of
libm testing, which are built as part of each test using this
machinery.
Currently, these functions get built for three tests for each type
(e.g. test-float, test-ifloat, test-float-finite), plus the vector
function tests. All these tests are huge and thus slow to build; the
output of gen-libm-test.pl totals around 40 MB across all functions.
To make the individual tests built from the Makefile smaller, it makes
sense to split these tests up so the tests for each function are built
separately (thus, three tests for each (function, type) pair, plus
vector tests built only for functions that actually have vector
versions). This improves parallelism and means that if tests fail,
the summary of failed tests makes it more obvious where the problem
might be without needing to look in the .out files to see which
functions' tests failed (though architecture maintainers still need to
keep libm-test-ulps up to date to avoid spurious failures of little
interest).
Simply including libm-test-driver.c as-is in such individual-function
tests does not work because of unused static check_* functions (those
functions only being used for the types of the outputs of the function
under test). It also means the common code gets built over 1000 times
instead of nine (plus vector tests). To avoid that issue, this patch
splits out the bulk of the libm-test-driver.c code into a separate
file libm-test-support.c (with a few functions made non-static). That
separate file is built only once for each floating-point type (so at
present three times, or twice on architectures with long double =
double). Definitions needed in both libm-test-support.c and
libm-test-driver.c go in libm-test-support.h (it's possible some of
those are in fact only needed in one of the two files).
libm-test-driver.c keeps definitions of a limited number of variables
used to configure how libm-test-support.c behaves, various macros and
structures needed by individual-function tests, and the main function.
This move is also consistent in spirit with the move away from
test-skeleton.c having all the test support code, to a small
support/test-driver.c included in individual tests with most of the
code built separately.
Tested for x86_64 and x86.
* math/libm-test-support.c: New file. Content from
math/libm-test-driver.c.
* math/libm-test-support.h: Likewise.
* math/libm-test-support-double.c: New file.
* math/libm-test-support-float.c: Likewise.
* math/libm-test-support-ldouble.c: Likewise.
* math/libm-test-driver.c: Remove main comment and header
includes. Include libm-test-support.h.
[!_GNU_SOURCE] (_GNU_SOURCE): Do not define.
(flag_test_errno): Remove static.
(flag_test_exceptions): Likewise.
(flag_test_finite): Likewise.
(flag_test_inline): Likewise.
(flag_test_mathvec): Likewise.
(test_msg): Likewise.
(NO_EXCEPTION): Remove.
(INVALID_EXCEPTION): Likewise.
(DIVIDE_BY_ZERO_EXCEPTION): Likewise.
(OVERFLOW_EXCEPTION): Likewise.
(UNDERFLOW_EXCEPTION): Likewise.
(INEXACT_EXCEPTION): Likewise.
(INVALID_EXCEPTION_OK): Likewise.
(DIVIDE_BY_ZERO_EXCEPTION_OK): Likewise.
(OVERFLOW_EXCEPTION_OK): Likewise.
(UNDERFLOW_EXCEPTION_OK): Likewise.
(NO_INEXACT_EXCEPTION): Likewise.
(EXCEPTIONS_OK): Likewise.
(IGNORE_ZERO_INF_SIGN): Likewise.
(TEST_NAN_SIGN): Likewise.
(TEST_NAN_PAYLOAD): Likewise.
(NO_TEST_INLINE): Likewise.
(XFAIL_TEST): Likewise.
(ERRNO_UNCHANGED): Likewise.
(ERRNO_EDOM): Likewise.
(ERRNO_ERANGE): Likewise.
(IGNORE_RESULT): Likewise.
(NON_FINITE): Likewise.
(TEST_SNAN): Likewise.
(NO_TEST_MATHVEC): Likewise.
(__CONCATX): Likewise.
(TYPE_MIN): Likewise.
(TYPE_TRUE_MIN): Likewise.
(TYPE_MAX): Likewise.
(MIN_EXP): Likewise.
(MAX_EXP): Likewise.
(MANT_DIG): Likewise.
(FSTR_MAX): Likewise.
(ulp_idx): Likewise.
(qtype_str): Remove static.
(TEST_COND_binary32): Remove.
(TEST_COND_binary64): Likewise.
(TEST_COND_binary128): Likewise.
(TEST_COND_ibm128): Likewise.
(TEST_COND_intel96): Likewise.
(TEST_COND_m68k96): Likewise.
(TEST_COND_ibm128_libgcc): Likewise.
(XFAIL_IBM128_LIBGCC): Likewise.
(PAYLOAD_DIG): Likewise.
(UNDERFLOW_EXCEPTION_FLOAT): Likewise.
(UNDERFLOW_EXCEPTION_OK_FLOAT): Likewise.
(UNDERFLOW_EXCEPTION_DOUBLE): Likewise.
(UNDERFLOW_EXCEPTION_OK_DOUBLE): Likewise.
(UNDERFLOW_EXCEPTION_LDOUBLE_IBM): Likewise.
(UNDERFLOW_EXCEPTION_BEFORE_ROUNDING): Likewise.
(TEST_COND_long32): Likewise.
(TEST_COND_long64): Likewise.
(TEST_COND_before_rounding): Likewise.
(TEST_COND_after_rounding): Likewise.
(ulps_file_name): Likewise.
(ulps_file): Likewise.
(output_ulps): Likewise.
(output_dir): Likewise.
(noErrors): Likewise.
(noTests): Likewise.
(noExcTests): Likewise.
(noErrnoTests): Likewise.
(verbose): Likewise.
(output_max_error): Likewise.
(output_points): Likewise.
(ignore_max_ulp): Likewise.
(max_error): Likewise.
(real_max_error): Likewise.
(imag_max_error): Likewise.
(prev_max_error): Likewise.
(prev_real_max_error): Likewise.
(prev_imag_max_error): Likewise.
(max_valid_error): Likewise.
(TYPE_DECIMAL_DIG): Likewise.
(TYPE_HEX_DIG): Likewise.
(fmt_ftostr): Likewise.
(compare_ulp_data): Likewise.
(find_ulps): Likewise.
(init_max_error): Likewise.
(set_max_error): Likewise.
(print_float): Likewise.
(print_screen): Likewise.
(print_screen_max_error): Likewise.
(update_stats): Likewise.
(print_function_ulps): Likewise.
(print_complex_function_ulps): Likewise.
(fpstack_test): Likewise.
(print_max_error): Likewise.
(print_complex_max_error): Likewise.
(test_single_exception): Likewise.
(test_exceptions): Likewise.
(test_single_errno): Likewise.
(test_errno): Likewise.
(ULPDIFF): Likewise.
(ulp): Likewise.
(check_float_internal): Likewise.
(check_float): Likewise.
(check_complex): Likewise.
(check_int): Likewise.
(check_long): Likewise.
(check_bool): Likewise.
(check_longlong): Likewise.
(check_intmax_t): Likewise.
(check_uintmax_t): Likewise.
(enable_test): Likewise.
(matherr): Likewise.
(initialize): Likewise.
(options): Likewise.
(doc): Remove static.
(argp): Likewise.
(parse_opt): Remove.
(check_ulp): Likewise.
(libm_test_init): Likewise.
(libm_test_finish): Likewise.
* math/Makefile (libm-test-support): New variable.
(test-extras): Add libm-test-support files.
(extra-test-objs): Likewise.
(CFLAGS-libm-test-support-float.c): New variable.
(CFLAGS-libm-test-support-double.c): Likewise.
(CFLAGS-libm-test-support-ldouble.c): Likewise.
($(addprefix $(objpfx),$(libm-tests)): Depend on appropriate
libm-test-support objects.
2017-02-08 21:11:49 +00:00
|
|
|
errno = 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
void
|
|
|
|
check_float (const char *test_name, FLOAT computed, FLOAT expected,
|
|
|
|
int exceptions)
|
|
|
|
{
|
|
|
|
check_float_internal (test_name, computed, expected,
|
|
|
|
exceptions, &max_error, prev_max_error);
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
void
|
2016-07-15 19:29:51 +00:00
|
|
|
check_complex (const char *test_name, CFLOAT computed,
|
|
|
|
CFLOAT expected,
|
Build most libm-test support code once per type.
libm-test-driver.c contains various functions used in the course of
libm testing, which are built as part of each test using this
machinery.
Currently, these functions get built for three tests for each type
(e.g. test-float, test-ifloat, test-float-finite), plus the vector
function tests. All these tests are huge and thus slow to build; the
output of gen-libm-test.pl totals around 40 MB across all functions.
To make the individual tests built from the Makefile smaller, it makes
sense to split these tests up so the tests for each function are built
separately (thus, three tests for each (function, type) pair, plus
vector tests built only for functions that actually have vector
versions). This improves parallelism and means that if tests fail,
the summary of failed tests makes it more obvious where the problem
might be without needing to look in the .out files to see which
functions' tests failed (though architecture maintainers still need to
keep libm-test-ulps up to date to avoid spurious failures of little
interest).
Simply including libm-test-driver.c as-is in such individual-function
tests does not work because of unused static check_* functions (those
functions only being used for the types of the outputs of the function
under test). It also means the common code gets built over 1000 times
instead of nine (plus vector tests). To avoid that issue, this patch
splits out the bulk of the libm-test-driver.c code into a separate
file libm-test-support.c (with a few functions made non-static). That
separate file is built only once for each floating-point type (so at
present three times, or twice on architectures with long double =
double). Definitions needed in both libm-test-support.c and
libm-test-driver.c go in libm-test-support.h (it's possible some of
those are in fact only needed in one of the two files).
libm-test-driver.c keeps definitions of a limited number of variables
used to configure how libm-test-support.c behaves, various macros and
structures needed by individual-function tests, and the main function.
This move is also consistent in spirit with the move away from
test-skeleton.c having all the test support code, to a small
support/test-driver.c included in individual tests with most of the
code built separately.
Tested for x86_64 and x86.
* math/libm-test-support.c: New file. Content from
math/libm-test-driver.c.
* math/libm-test-support.h: Likewise.
* math/libm-test-support-double.c: New file.
* math/libm-test-support-float.c: Likewise.
* math/libm-test-support-ldouble.c: Likewise.
* math/libm-test-driver.c: Remove main comment and header
includes. Include libm-test-support.h.
[!_GNU_SOURCE] (_GNU_SOURCE): Do not define.
(flag_test_errno): Remove static.
(flag_test_exceptions): Likewise.
(flag_test_finite): Likewise.
(flag_test_inline): Likewise.
(flag_test_mathvec): Likewise.
(test_msg): Likewise.
(NO_EXCEPTION): Remove.
(INVALID_EXCEPTION): Likewise.
(DIVIDE_BY_ZERO_EXCEPTION): Likewise.
(OVERFLOW_EXCEPTION): Likewise.
(UNDERFLOW_EXCEPTION): Likewise.
(INEXACT_EXCEPTION): Likewise.
(INVALID_EXCEPTION_OK): Likewise.
(DIVIDE_BY_ZERO_EXCEPTION_OK): Likewise.
(OVERFLOW_EXCEPTION_OK): Likewise.
(UNDERFLOW_EXCEPTION_OK): Likewise.
(NO_INEXACT_EXCEPTION): Likewise.
(EXCEPTIONS_OK): Likewise.
(IGNORE_ZERO_INF_SIGN): Likewise.
(TEST_NAN_SIGN): Likewise.
(TEST_NAN_PAYLOAD): Likewise.
(NO_TEST_INLINE): Likewise.
(XFAIL_TEST): Likewise.
(ERRNO_UNCHANGED): Likewise.
(ERRNO_EDOM): Likewise.
(ERRNO_ERANGE): Likewise.
(IGNORE_RESULT): Likewise.
(NON_FINITE): Likewise.
(TEST_SNAN): Likewise.
(NO_TEST_MATHVEC): Likewise.
(__CONCATX): Likewise.
(TYPE_MIN): Likewise.
(TYPE_TRUE_MIN): Likewise.
(TYPE_MAX): Likewise.
(MIN_EXP): Likewise.
(MAX_EXP): Likewise.
(MANT_DIG): Likewise.
(FSTR_MAX): Likewise.
(ulp_idx): Likewise.
(qtype_str): Remove static.
(TEST_COND_binary32): Remove.
(TEST_COND_binary64): Likewise.
(TEST_COND_binary128): Likewise.
(TEST_COND_ibm128): Likewise.
(TEST_COND_intel96): Likewise.
(TEST_COND_m68k96): Likewise.
(TEST_COND_ibm128_libgcc): Likewise.
(XFAIL_IBM128_LIBGCC): Likewise.
(PAYLOAD_DIG): Likewise.
(UNDERFLOW_EXCEPTION_FLOAT): Likewise.
(UNDERFLOW_EXCEPTION_OK_FLOAT): Likewise.
(UNDERFLOW_EXCEPTION_DOUBLE): Likewise.
(UNDERFLOW_EXCEPTION_OK_DOUBLE): Likewise.
(UNDERFLOW_EXCEPTION_LDOUBLE_IBM): Likewise.
(UNDERFLOW_EXCEPTION_BEFORE_ROUNDING): Likewise.
(TEST_COND_long32): Likewise.
(TEST_COND_long64): Likewise.
(TEST_COND_before_rounding): Likewise.
(TEST_COND_after_rounding): Likewise.
(ulps_file_name): Likewise.
(ulps_file): Likewise.
(output_ulps): Likewise.
(output_dir): Likewise.
(noErrors): Likewise.
(noTests): Likewise.
(noExcTests): Likewise.
(noErrnoTests): Likewise.
(verbose): Likewise.
(output_max_error): Likewise.
(output_points): Likewise.
(ignore_max_ulp): Likewise.
(max_error): Likewise.
(real_max_error): Likewise.
(imag_max_error): Likewise.
(prev_max_error): Likewise.
(prev_real_max_error): Likewise.
(prev_imag_max_error): Likewise.
(max_valid_error): Likewise.
(TYPE_DECIMAL_DIG): Likewise.
(TYPE_HEX_DIG): Likewise.
(fmt_ftostr): Likewise.
(compare_ulp_data): Likewise.
(find_ulps): Likewise.
(init_max_error): Likewise.
(set_max_error): Likewise.
(print_float): Likewise.
(print_screen): Likewise.
(print_screen_max_error): Likewise.
(update_stats): Likewise.
(print_function_ulps): Likewise.
(print_complex_function_ulps): Likewise.
(fpstack_test): Likewise.
(print_max_error): Likewise.
(print_complex_max_error): Likewise.
(test_single_exception): Likewise.
(test_exceptions): Likewise.
(test_single_errno): Likewise.
(test_errno): Likewise.
(ULPDIFF): Likewise.
(ulp): Likewise.
(check_float_internal): Likewise.
(check_float): Likewise.
(check_complex): Likewise.
(check_int): Likewise.
(check_long): Likewise.
(check_bool): Likewise.
(check_longlong): Likewise.
(check_intmax_t): Likewise.
(check_uintmax_t): Likewise.
(enable_test): Likewise.
(matherr): Likewise.
(initialize): Likewise.
(options): Likewise.
(doc): Remove static.
(argp): Likewise.
(parse_opt): Remove.
(check_ulp): Likewise.
(libm_test_init): Likewise.
(libm_test_finish): Likewise.
* math/Makefile (libm-test-support): New variable.
(test-extras): Add libm-test-support files.
(extra-test-objs): Likewise.
(CFLAGS-libm-test-support-float.c): New variable.
(CFLAGS-libm-test-support-double.c): Likewise.
(CFLAGS-libm-test-support-ldouble.c): Likewise.
($(addprefix $(objpfx),$(libm-tests)): Depend on appropriate
libm-test-support objects.
2017-02-08 21:11:49 +00:00
|
|
|
int exception)
|
|
|
|
{
|
|
|
|
FLOAT part_comp, part_exp;
|
|
|
|
char *str;
|
|
|
|
|
|
|
|
if (asprintf (&str, "Real part of: %s", test_name) == -1)
|
|
|
|
abort ();
|
|
|
|
|
|
|
|
part_comp = __real__ computed;
|
|
|
|
part_exp = __real__ expected;
|
|
|
|
|
|
|
|
check_float_internal (str, part_comp, part_exp,
|
|
|
|
exception, &real_max_error, prev_real_max_error);
|
|
|
|
free (str);
|
|
|
|
|
|
|
|
if (asprintf (&str, "Imaginary part of: %s", test_name) == -1)
|
|
|
|
abort ();
|
|
|
|
|
|
|
|
part_comp = __imag__ computed;
|
|
|
|
part_exp = __imag__ expected;
|
|
|
|
|
|
|
|
/* Don't check again for exceptions or errno, just pass through the
|
|
|
|
other relevant flags. */
|
|
|
|
check_float_internal (str, part_comp, part_exp,
|
|
|
|
exception & (IGNORE_ZERO_INF_SIGN
|
|
|
|
| TEST_NAN_SIGN
|
|
|
|
| IGNORE_RESULT),
|
|
|
|
&imag_max_error, prev_imag_max_error);
|
|
|
|
free (str);
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
/* Check that computed and expected values are equal (int values). */
|
|
|
|
void
|
|
|
|
check_int (const char *test_name, int computed, int expected,
|
|
|
|
int exceptions)
|
|
|
|
{
|
|
|
|
int ok = 0;
|
|
|
|
int errno_value = errno;
|
|
|
|
|
|
|
|
test_exceptions (test_name, exceptions);
|
|
|
|
test_errno (test_name, errno_value, exceptions);
|
|
|
|
if (exceptions & IGNORE_RESULT)
|
|
|
|
goto out;
|
|
|
|
noTests++;
|
|
|
|
if (computed == expected)
|
|
|
|
ok = 1;
|
|
|
|
|
|
|
|
if (print_screen (ok))
|
|
|
|
{
|
|
|
|
if (!ok)
|
|
|
|
printf ("Failure: ");
|
|
|
|
printf ("Test: %s\n", test_name);
|
|
|
|
printf ("Result:\n");
|
|
|
|
printf (" is: %d\n", computed);
|
|
|
|
printf (" should be: %d\n", expected);
|
|
|
|
}
|
|
|
|
|
|
|
|
update_stats (ok);
|
|
|
|
out:
|
|
|
|
fpstack_test (test_name);
|
2017-06-23 20:10:45 +00:00
|
|
|
feclearexcept (FE_ALL_EXCEPT);
|
Build most libm-test support code once per type.
libm-test-driver.c contains various functions used in the course of
libm testing, which are built as part of each test using this
machinery.
Currently, these functions get built for three tests for each type
(e.g. test-float, test-ifloat, test-float-finite), plus the vector
function tests. All these tests are huge and thus slow to build; the
output of gen-libm-test.pl totals around 40 MB across all functions.
To make the individual tests built from the Makefile smaller, it makes
sense to split these tests up so the tests for each function are built
separately (thus, three tests for each (function, type) pair, plus
vector tests built only for functions that actually have vector
versions). This improves parallelism and means that if tests fail,
the summary of failed tests makes it more obvious where the problem
might be without needing to look in the .out files to see which
functions' tests failed (though architecture maintainers still need to
keep libm-test-ulps up to date to avoid spurious failures of little
interest).
Simply including libm-test-driver.c as-is in such individual-function
tests does not work because of unused static check_* functions (those
functions only being used for the types of the outputs of the function
under test). It also means the common code gets built over 1000 times
instead of nine (plus vector tests). To avoid that issue, this patch
splits out the bulk of the libm-test-driver.c code into a separate
file libm-test-support.c (with a few functions made non-static). That
separate file is built only once for each floating-point type (so at
present three times, or twice on architectures with long double =
double). Definitions needed in both libm-test-support.c and
libm-test-driver.c go in libm-test-support.h (it's possible some of
those are in fact only needed in one of the two files).
libm-test-driver.c keeps definitions of a limited number of variables
used to configure how libm-test-support.c behaves, various macros and
structures needed by individual-function tests, and the main function.
This move is also consistent in spirit with the move away from
test-skeleton.c having all the test support code, to a small
support/test-driver.c included in individual tests with most of the
code built separately.
Tested for x86_64 and x86.
* math/libm-test-support.c: New file. Content from
math/libm-test-driver.c.
* math/libm-test-support.h: Likewise.
* math/libm-test-support-double.c: New file.
* math/libm-test-support-float.c: Likewise.
* math/libm-test-support-ldouble.c: Likewise.
* math/libm-test-driver.c: Remove main comment and header
includes. Include libm-test-support.h.
[!_GNU_SOURCE] (_GNU_SOURCE): Do not define.
(flag_test_errno): Remove static.
(flag_test_exceptions): Likewise.
(flag_test_finite): Likewise.
(flag_test_inline): Likewise.
(flag_test_mathvec): Likewise.
(test_msg): Likewise.
(NO_EXCEPTION): Remove.
(INVALID_EXCEPTION): Likewise.
(DIVIDE_BY_ZERO_EXCEPTION): Likewise.
(OVERFLOW_EXCEPTION): Likewise.
(UNDERFLOW_EXCEPTION): Likewise.
(INEXACT_EXCEPTION): Likewise.
(INVALID_EXCEPTION_OK): Likewise.
(DIVIDE_BY_ZERO_EXCEPTION_OK): Likewise.
(OVERFLOW_EXCEPTION_OK): Likewise.
(UNDERFLOW_EXCEPTION_OK): Likewise.
(NO_INEXACT_EXCEPTION): Likewise.
(EXCEPTIONS_OK): Likewise.
(IGNORE_ZERO_INF_SIGN): Likewise.
(TEST_NAN_SIGN): Likewise.
(TEST_NAN_PAYLOAD): Likewise.
(NO_TEST_INLINE): Likewise.
(XFAIL_TEST): Likewise.
(ERRNO_UNCHANGED): Likewise.
(ERRNO_EDOM): Likewise.
(ERRNO_ERANGE): Likewise.
(IGNORE_RESULT): Likewise.
(NON_FINITE): Likewise.
(TEST_SNAN): Likewise.
(NO_TEST_MATHVEC): Likewise.
(__CONCATX): Likewise.
(TYPE_MIN): Likewise.
(TYPE_TRUE_MIN): Likewise.
(TYPE_MAX): Likewise.
(MIN_EXP): Likewise.
(MAX_EXP): Likewise.
(MANT_DIG): Likewise.
(FSTR_MAX): Likewise.
(ulp_idx): Likewise.
(qtype_str): Remove static.
(TEST_COND_binary32): Remove.
(TEST_COND_binary64): Likewise.
(TEST_COND_binary128): Likewise.
(TEST_COND_ibm128): Likewise.
(TEST_COND_intel96): Likewise.
(TEST_COND_m68k96): Likewise.
(TEST_COND_ibm128_libgcc): Likewise.
(XFAIL_IBM128_LIBGCC): Likewise.
(PAYLOAD_DIG): Likewise.
(UNDERFLOW_EXCEPTION_FLOAT): Likewise.
(UNDERFLOW_EXCEPTION_OK_FLOAT): Likewise.
(UNDERFLOW_EXCEPTION_DOUBLE): Likewise.
(UNDERFLOW_EXCEPTION_OK_DOUBLE): Likewise.
(UNDERFLOW_EXCEPTION_LDOUBLE_IBM): Likewise.
(UNDERFLOW_EXCEPTION_BEFORE_ROUNDING): Likewise.
(TEST_COND_long32): Likewise.
(TEST_COND_long64): Likewise.
(TEST_COND_before_rounding): Likewise.
(TEST_COND_after_rounding): Likewise.
(ulps_file_name): Likewise.
(ulps_file): Likewise.
(output_ulps): Likewise.
(output_dir): Likewise.
(noErrors): Likewise.
(noTests): Likewise.
(noExcTests): Likewise.
(noErrnoTests): Likewise.
(verbose): Likewise.
(output_max_error): Likewise.
(output_points): Likewise.
(ignore_max_ulp): Likewise.
(max_error): Likewise.
(real_max_error): Likewise.
(imag_max_error): Likewise.
(prev_max_error): Likewise.
(prev_real_max_error): Likewise.
(prev_imag_max_error): Likewise.
(max_valid_error): Likewise.
(TYPE_DECIMAL_DIG): Likewise.
(TYPE_HEX_DIG): Likewise.
(fmt_ftostr): Likewise.
(compare_ulp_data): Likewise.
(find_ulps): Likewise.
(init_max_error): Likewise.
(set_max_error): Likewise.
(print_float): Likewise.
(print_screen): Likewise.
(print_screen_max_error): Likewise.
(update_stats): Likewise.
(print_function_ulps): Likewise.
(print_complex_function_ulps): Likewise.
(fpstack_test): Likewise.
(print_max_error): Likewise.
(print_complex_max_error): Likewise.
(test_single_exception): Likewise.
(test_exceptions): Likewise.
(test_single_errno): Likewise.
(test_errno): Likewise.
(ULPDIFF): Likewise.
(ulp): Likewise.
(check_float_internal): Likewise.
(check_float): Likewise.
(check_complex): Likewise.
(check_int): Likewise.
(check_long): Likewise.
(check_bool): Likewise.
(check_longlong): Likewise.
(check_intmax_t): Likewise.
(check_uintmax_t): Likewise.
(enable_test): Likewise.
(matherr): Likewise.
(initialize): Likewise.
(options): Likewise.
(doc): Remove static.
(argp): Likewise.
(parse_opt): Remove.
(check_ulp): Likewise.
(libm_test_init): Likewise.
(libm_test_finish): Likewise.
* math/Makefile (libm-test-support): New variable.
(test-extras): Add libm-test-support files.
(extra-test-objs): Likewise.
(CFLAGS-libm-test-support-float.c): New variable.
(CFLAGS-libm-test-support-double.c): Likewise.
(CFLAGS-libm-test-support-ldouble.c): Likewise.
($(addprefix $(objpfx),$(libm-tests)): Depend on appropriate
libm-test-support objects.
2017-02-08 21:11:49 +00:00
|
|
|
errno = 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
/* Check that computed and expected values are equal (long int values). */
|
|
|
|
void
|
|
|
|
check_long (const char *test_name, long int computed, long int expected,
|
|
|
|
int exceptions)
|
|
|
|
{
|
|
|
|
int ok = 0;
|
|
|
|
int errno_value = errno;
|
|
|
|
|
|
|
|
test_exceptions (test_name, exceptions);
|
|
|
|
test_errno (test_name, errno_value, exceptions);
|
|
|
|
if (exceptions & IGNORE_RESULT)
|
|
|
|
goto out;
|
|
|
|
noTests++;
|
|
|
|
if (computed == expected)
|
|
|
|
ok = 1;
|
|
|
|
|
|
|
|
if (print_screen (ok))
|
|
|
|
{
|
|
|
|
if (!ok)
|
|
|
|
printf ("Failure: ");
|
|
|
|
printf ("Test: %s\n", test_name);
|
|
|
|
printf ("Result:\n");
|
|
|
|
printf (" is: %ld\n", computed);
|
|
|
|
printf (" should be: %ld\n", expected);
|
|
|
|
}
|
|
|
|
|
|
|
|
update_stats (ok);
|
|
|
|
out:
|
|
|
|
fpstack_test (test_name);
|
2017-06-23 20:10:45 +00:00
|
|
|
feclearexcept (FE_ALL_EXCEPT);
|
Build most libm-test support code once per type.
libm-test-driver.c contains various functions used in the course of
libm testing, which are built as part of each test using this
machinery.
Currently, these functions get built for three tests for each type
(e.g. test-float, test-ifloat, test-float-finite), plus the vector
function tests. All these tests are huge and thus slow to build; the
output of gen-libm-test.pl totals around 40 MB across all functions.
To make the individual tests built from the Makefile smaller, it makes
sense to split these tests up so the tests for each function are built
separately (thus, three tests for each (function, type) pair, plus
vector tests built only for functions that actually have vector
versions). This improves parallelism and means that if tests fail,
the summary of failed tests makes it more obvious where the problem
might be without needing to look in the .out files to see which
functions' tests failed (though architecture maintainers still need to
keep libm-test-ulps up to date to avoid spurious failures of little
interest).
Simply including libm-test-driver.c as-is in such individual-function
tests does not work because of unused static check_* functions (those
functions only being used for the types of the outputs of the function
under test). It also means the common code gets built over 1000 times
instead of nine (plus vector tests). To avoid that issue, this patch
splits out the bulk of the libm-test-driver.c code into a separate
file libm-test-support.c (with a few functions made non-static). That
separate file is built only once for each floating-point type (so at
present three times, or twice on architectures with long double =
double). Definitions needed in both libm-test-support.c and
libm-test-driver.c go in libm-test-support.h (it's possible some of
those are in fact only needed in one of the two files).
libm-test-driver.c keeps definitions of a limited number of variables
used to configure how libm-test-support.c behaves, various macros and
structures needed by individual-function tests, and the main function.
This move is also consistent in spirit with the move away from
test-skeleton.c having all the test support code, to a small
support/test-driver.c included in individual tests with most of the
code built separately.
Tested for x86_64 and x86.
* math/libm-test-support.c: New file. Content from
math/libm-test-driver.c.
* math/libm-test-support.h: Likewise.
* math/libm-test-support-double.c: New file.
* math/libm-test-support-float.c: Likewise.
* math/libm-test-support-ldouble.c: Likewise.
* math/libm-test-driver.c: Remove main comment and header
includes. Include libm-test-support.h.
[!_GNU_SOURCE] (_GNU_SOURCE): Do not define.
(flag_test_errno): Remove static.
(flag_test_exceptions): Likewise.
(flag_test_finite): Likewise.
(flag_test_inline): Likewise.
(flag_test_mathvec): Likewise.
(test_msg): Likewise.
(NO_EXCEPTION): Remove.
(INVALID_EXCEPTION): Likewise.
(DIVIDE_BY_ZERO_EXCEPTION): Likewise.
(OVERFLOW_EXCEPTION): Likewise.
(UNDERFLOW_EXCEPTION): Likewise.
(INEXACT_EXCEPTION): Likewise.
(INVALID_EXCEPTION_OK): Likewise.
(DIVIDE_BY_ZERO_EXCEPTION_OK): Likewise.
(OVERFLOW_EXCEPTION_OK): Likewise.
(UNDERFLOW_EXCEPTION_OK): Likewise.
(NO_INEXACT_EXCEPTION): Likewise.
(EXCEPTIONS_OK): Likewise.
(IGNORE_ZERO_INF_SIGN): Likewise.
(TEST_NAN_SIGN): Likewise.
(TEST_NAN_PAYLOAD): Likewise.
(NO_TEST_INLINE): Likewise.
(XFAIL_TEST): Likewise.
(ERRNO_UNCHANGED): Likewise.
(ERRNO_EDOM): Likewise.
(ERRNO_ERANGE): Likewise.
(IGNORE_RESULT): Likewise.
(NON_FINITE): Likewise.
(TEST_SNAN): Likewise.
(NO_TEST_MATHVEC): Likewise.
(__CONCATX): Likewise.
(TYPE_MIN): Likewise.
(TYPE_TRUE_MIN): Likewise.
(TYPE_MAX): Likewise.
(MIN_EXP): Likewise.
(MAX_EXP): Likewise.
(MANT_DIG): Likewise.
(FSTR_MAX): Likewise.
(ulp_idx): Likewise.
(qtype_str): Remove static.
(TEST_COND_binary32): Remove.
(TEST_COND_binary64): Likewise.
(TEST_COND_binary128): Likewise.
(TEST_COND_ibm128): Likewise.
(TEST_COND_intel96): Likewise.
(TEST_COND_m68k96): Likewise.
(TEST_COND_ibm128_libgcc): Likewise.
(XFAIL_IBM128_LIBGCC): Likewise.
(PAYLOAD_DIG): Likewise.
(UNDERFLOW_EXCEPTION_FLOAT): Likewise.
(UNDERFLOW_EXCEPTION_OK_FLOAT): Likewise.
(UNDERFLOW_EXCEPTION_DOUBLE): Likewise.
(UNDERFLOW_EXCEPTION_OK_DOUBLE): Likewise.
(UNDERFLOW_EXCEPTION_LDOUBLE_IBM): Likewise.
(UNDERFLOW_EXCEPTION_BEFORE_ROUNDING): Likewise.
(TEST_COND_long32): Likewise.
(TEST_COND_long64): Likewise.
(TEST_COND_before_rounding): Likewise.
(TEST_COND_after_rounding): Likewise.
(ulps_file_name): Likewise.
(ulps_file): Likewise.
(output_ulps): Likewise.
(output_dir): Likewise.
(noErrors): Likewise.
(noTests): Likewise.
(noExcTests): Likewise.
(noErrnoTests): Likewise.
(verbose): Likewise.
(output_max_error): Likewise.
(output_points): Likewise.
(ignore_max_ulp): Likewise.
(max_error): Likewise.
(real_max_error): Likewise.
(imag_max_error): Likewise.
(prev_max_error): Likewise.
(prev_real_max_error): Likewise.
(prev_imag_max_error): Likewise.
(max_valid_error): Likewise.
(TYPE_DECIMAL_DIG): Likewise.
(TYPE_HEX_DIG): Likewise.
(fmt_ftostr): Likewise.
(compare_ulp_data): Likewise.
(find_ulps): Likewise.
(init_max_error): Likewise.
(set_max_error): Likewise.
(print_float): Likewise.
(print_screen): Likewise.
(print_screen_max_error): Likewise.
(update_stats): Likewise.
(print_function_ulps): Likewise.
(print_complex_function_ulps): Likewise.
(fpstack_test): Likewise.
(print_max_error): Likewise.
(print_complex_max_error): Likewise.
(test_single_exception): Likewise.
(test_exceptions): Likewise.
(test_single_errno): Likewise.
(test_errno): Likewise.
(ULPDIFF): Likewise.
(ulp): Likewise.
(check_float_internal): Likewise.
(check_float): Likewise.
(check_complex): Likewise.
(check_int): Likewise.
(check_long): Likewise.
(check_bool): Likewise.
(check_longlong): Likewise.
(check_intmax_t): Likewise.
(check_uintmax_t): Likewise.
(enable_test): Likewise.
(matherr): Likewise.
(initialize): Likewise.
(options): Likewise.
(doc): Remove static.
(argp): Likewise.
(parse_opt): Remove.
(check_ulp): Likewise.
(libm_test_init): Likewise.
(libm_test_finish): Likewise.
* math/Makefile (libm-test-support): New variable.
(test-extras): Add libm-test-support files.
(extra-test-objs): Likewise.
(CFLAGS-libm-test-support-float.c): New variable.
(CFLAGS-libm-test-support-double.c): Likewise.
(CFLAGS-libm-test-support-ldouble.c): Likewise.
($(addprefix $(objpfx),$(libm-tests)): Depend on appropriate
libm-test-support objects.
2017-02-08 21:11:49 +00:00
|
|
|
errno = 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
/* Check that computed value is true/false. */
|
|
|
|
void
|
|
|
|
check_bool (const char *test_name, int computed, int expected,
|
|
|
|
int exceptions)
|
|
|
|
{
|
|
|
|
int ok = 0;
|
|
|
|
int errno_value = errno;
|
|
|
|
|
|
|
|
test_exceptions (test_name, exceptions);
|
|
|
|
test_errno (test_name, errno_value, exceptions);
|
|
|
|
if (exceptions & IGNORE_RESULT)
|
|
|
|
goto out;
|
|
|
|
noTests++;
|
|
|
|
if ((computed == 0) == (expected == 0))
|
|
|
|
ok = 1;
|
|
|
|
|
|
|
|
if (print_screen (ok))
|
|
|
|
{
|
|
|
|
if (!ok)
|
|
|
|
printf ("Failure: ");
|
|
|
|
printf ("Test: %s\n", test_name);
|
|
|
|
printf ("Result:\n");
|
|
|
|
printf (" is: %d\n", computed);
|
|
|
|
printf (" should be: %d\n", expected);
|
|
|
|
}
|
|
|
|
|
|
|
|
update_stats (ok);
|
|
|
|
out:
|
|
|
|
fpstack_test (test_name);
|
2017-06-23 20:10:45 +00:00
|
|
|
feclearexcept (FE_ALL_EXCEPT);
|
Build most libm-test support code once per type.
libm-test-driver.c contains various functions used in the course of
libm testing, which are built as part of each test using this
machinery.
Currently, these functions get built for three tests for each type
(e.g. test-float, test-ifloat, test-float-finite), plus the vector
function tests. All these tests are huge and thus slow to build; the
output of gen-libm-test.pl totals around 40 MB across all functions.
To make the individual tests built from the Makefile smaller, it makes
sense to split these tests up so the tests for each function are built
separately (thus, three tests for each (function, type) pair, plus
vector tests built only for functions that actually have vector
versions). This improves parallelism and means that if tests fail,
the summary of failed tests makes it more obvious where the problem
might be without needing to look in the .out files to see which
functions' tests failed (though architecture maintainers still need to
keep libm-test-ulps up to date to avoid spurious failures of little
interest).
Simply including libm-test-driver.c as-is in such individual-function
tests does not work because of unused static check_* functions (those
functions only being used for the types of the outputs of the function
under test). It also means the common code gets built over 1000 times
instead of nine (plus vector tests). To avoid that issue, this patch
splits out the bulk of the libm-test-driver.c code into a separate
file libm-test-support.c (with a few functions made non-static). That
separate file is built only once for each floating-point type (so at
present three times, or twice on architectures with long double =
double). Definitions needed in both libm-test-support.c and
libm-test-driver.c go in libm-test-support.h (it's possible some of
those are in fact only needed in one of the two files).
libm-test-driver.c keeps definitions of a limited number of variables
used to configure how libm-test-support.c behaves, various macros and
structures needed by individual-function tests, and the main function.
This move is also consistent in spirit with the move away from
test-skeleton.c having all the test support code, to a small
support/test-driver.c included in individual tests with most of the
code built separately.
Tested for x86_64 and x86.
* math/libm-test-support.c: New file. Content from
math/libm-test-driver.c.
* math/libm-test-support.h: Likewise.
* math/libm-test-support-double.c: New file.
* math/libm-test-support-float.c: Likewise.
* math/libm-test-support-ldouble.c: Likewise.
* math/libm-test-driver.c: Remove main comment and header
includes. Include libm-test-support.h.
[!_GNU_SOURCE] (_GNU_SOURCE): Do not define.
(flag_test_errno): Remove static.
(flag_test_exceptions): Likewise.
(flag_test_finite): Likewise.
(flag_test_inline): Likewise.
(flag_test_mathvec): Likewise.
(test_msg): Likewise.
(NO_EXCEPTION): Remove.
(INVALID_EXCEPTION): Likewise.
(DIVIDE_BY_ZERO_EXCEPTION): Likewise.
(OVERFLOW_EXCEPTION): Likewise.
(UNDERFLOW_EXCEPTION): Likewise.
(INEXACT_EXCEPTION): Likewise.
(INVALID_EXCEPTION_OK): Likewise.
(DIVIDE_BY_ZERO_EXCEPTION_OK): Likewise.
(OVERFLOW_EXCEPTION_OK): Likewise.
(UNDERFLOW_EXCEPTION_OK): Likewise.
(NO_INEXACT_EXCEPTION): Likewise.
(EXCEPTIONS_OK): Likewise.
(IGNORE_ZERO_INF_SIGN): Likewise.
(TEST_NAN_SIGN): Likewise.
(TEST_NAN_PAYLOAD): Likewise.
(NO_TEST_INLINE): Likewise.
(XFAIL_TEST): Likewise.
(ERRNO_UNCHANGED): Likewise.
(ERRNO_EDOM): Likewise.
(ERRNO_ERANGE): Likewise.
(IGNORE_RESULT): Likewise.
(NON_FINITE): Likewise.
(TEST_SNAN): Likewise.
(NO_TEST_MATHVEC): Likewise.
(__CONCATX): Likewise.
(TYPE_MIN): Likewise.
(TYPE_TRUE_MIN): Likewise.
(TYPE_MAX): Likewise.
(MIN_EXP): Likewise.
(MAX_EXP): Likewise.
(MANT_DIG): Likewise.
(FSTR_MAX): Likewise.
(ulp_idx): Likewise.
(qtype_str): Remove static.
(TEST_COND_binary32): Remove.
(TEST_COND_binary64): Likewise.
(TEST_COND_binary128): Likewise.
(TEST_COND_ibm128): Likewise.
(TEST_COND_intel96): Likewise.
(TEST_COND_m68k96): Likewise.
(TEST_COND_ibm128_libgcc): Likewise.
(XFAIL_IBM128_LIBGCC): Likewise.
(PAYLOAD_DIG): Likewise.
(UNDERFLOW_EXCEPTION_FLOAT): Likewise.
(UNDERFLOW_EXCEPTION_OK_FLOAT): Likewise.
(UNDERFLOW_EXCEPTION_DOUBLE): Likewise.
(UNDERFLOW_EXCEPTION_OK_DOUBLE): Likewise.
(UNDERFLOW_EXCEPTION_LDOUBLE_IBM): Likewise.
(UNDERFLOW_EXCEPTION_BEFORE_ROUNDING): Likewise.
(TEST_COND_long32): Likewise.
(TEST_COND_long64): Likewise.
(TEST_COND_before_rounding): Likewise.
(TEST_COND_after_rounding): Likewise.
(ulps_file_name): Likewise.
(ulps_file): Likewise.
(output_ulps): Likewise.
(output_dir): Likewise.
(noErrors): Likewise.
(noTests): Likewise.
(noExcTests): Likewise.
(noErrnoTests): Likewise.
(verbose): Likewise.
(output_max_error): Likewise.
(output_points): Likewise.
(ignore_max_ulp): Likewise.
(max_error): Likewise.
(real_max_error): Likewise.
(imag_max_error): Likewise.
(prev_max_error): Likewise.
(prev_real_max_error): Likewise.
(prev_imag_max_error): Likewise.
(max_valid_error): Likewise.
(TYPE_DECIMAL_DIG): Likewise.
(TYPE_HEX_DIG): Likewise.
(fmt_ftostr): Likewise.
(compare_ulp_data): Likewise.
(find_ulps): Likewise.
(init_max_error): Likewise.
(set_max_error): Likewise.
(print_float): Likewise.
(print_screen): Likewise.
(print_screen_max_error): Likewise.
(update_stats): Likewise.
(print_function_ulps): Likewise.
(print_complex_function_ulps): Likewise.
(fpstack_test): Likewise.
(print_max_error): Likewise.
(print_complex_max_error): Likewise.
(test_single_exception): Likewise.
(test_exceptions): Likewise.
(test_single_errno): Likewise.
(test_errno): Likewise.
(ULPDIFF): Likewise.
(ulp): Likewise.
(check_float_internal): Likewise.
(check_float): Likewise.
(check_complex): Likewise.
(check_int): Likewise.
(check_long): Likewise.
(check_bool): Likewise.
(check_longlong): Likewise.
(check_intmax_t): Likewise.
(check_uintmax_t): Likewise.
(enable_test): Likewise.
(matherr): Likewise.
(initialize): Likewise.
(options): Likewise.
(doc): Remove static.
(argp): Likewise.
(parse_opt): Remove.
(check_ulp): Likewise.
(libm_test_init): Likewise.
(libm_test_finish): Likewise.
* math/Makefile (libm-test-support): New variable.
(test-extras): Add libm-test-support files.
(extra-test-objs): Likewise.
(CFLAGS-libm-test-support-float.c): New variable.
(CFLAGS-libm-test-support-double.c): Likewise.
(CFLAGS-libm-test-support-ldouble.c): Likewise.
($(addprefix $(objpfx),$(libm-tests)): Depend on appropriate
libm-test-support objects.
2017-02-08 21:11:49 +00:00
|
|
|
errno = 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
/* check that computed and expected values are equal (long int values) */
|
|
|
|
void
|
|
|
|
check_longlong (const char *test_name, long long int computed,
|
|
|
|
long long int expected,
|
|
|
|
int exceptions)
|
|
|
|
{
|
|
|
|
int ok = 0;
|
|
|
|
int errno_value = errno;
|
|
|
|
|
|
|
|
test_exceptions (test_name, exceptions);
|
|
|
|
test_errno (test_name, errno_value, exceptions);
|
|
|
|
if (exceptions & IGNORE_RESULT)
|
|
|
|
goto out;
|
|
|
|
noTests++;
|
|
|
|
if (computed == expected)
|
|
|
|
ok = 1;
|
|
|
|
|
|
|
|
if (print_screen (ok))
|
|
|
|
{
|
|
|
|
if (!ok)
|
|
|
|
printf ("Failure:");
|
|
|
|
printf ("Test: %s\n", test_name);
|
|
|
|
printf ("Result:\n");
|
|
|
|
printf (" is: %lld\n", computed);
|
|
|
|
printf (" should be: %lld\n", expected);
|
|
|
|
}
|
|
|
|
|
|
|
|
update_stats (ok);
|
|
|
|
out:
|
|
|
|
fpstack_test (test_name);
|
2017-06-23 20:10:45 +00:00
|
|
|
feclearexcept (FE_ALL_EXCEPT);
|
Build most libm-test support code once per type.
libm-test-driver.c contains various functions used in the course of
libm testing, which are built as part of each test using this
machinery.
Currently, these functions get built for three tests for each type
(e.g. test-float, test-ifloat, test-float-finite), plus the vector
function tests. All these tests are huge and thus slow to build; the
output of gen-libm-test.pl totals around 40 MB across all functions.
To make the individual tests built from the Makefile smaller, it makes
sense to split these tests up so the tests for each function are built
separately (thus, three tests for each (function, type) pair, plus
vector tests built only for functions that actually have vector
versions). This improves parallelism and means that if tests fail,
the summary of failed tests makes it more obvious where the problem
might be without needing to look in the .out files to see which
functions' tests failed (though architecture maintainers still need to
keep libm-test-ulps up to date to avoid spurious failures of little
interest).
Simply including libm-test-driver.c as-is in such individual-function
tests does not work because of unused static check_* functions (those
functions only being used for the types of the outputs of the function
under test). It also means the common code gets built over 1000 times
instead of nine (plus vector tests). To avoid that issue, this patch
splits out the bulk of the libm-test-driver.c code into a separate
file libm-test-support.c (with a few functions made non-static). That
separate file is built only once for each floating-point type (so at
present three times, or twice on architectures with long double =
double). Definitions needed in both libm-test-support.c and
libm-test-driver.c go in libm-test-support.h (it's possible some of
those are in fact only needed in one of the two files).
libm-test-driver.c keeps definitions of a limited number of variables
used to configure how libm-test-support.c behaves, various macros and
structures needed by individual-function tests, and the main function.
This move is also consistent in spirit with the move away from
test-skeleton.c having all the test support code, to a small
support/test-driver.c included in individual tests with most of the
code built separately.
Tested for x86_64 and x86.
* math/libm-test-support.c: New file. Content from
math/libm-test-driver.c.
* math/libm-test-support.h: Likewise.
* math/libm-test-support-double.c: New file.
* math/libm-test-support-float.c: Likewise.
* math/libm-test-support-ldouble.c: Likewise.
* math/libm-test-driver.c: Remove main comment and header
includes. Include libm-test-support.h.
[!_GNU_SOURCE] (_GNU_SOURCE): Do not define.
(flag_test_errno): Remove static.
(flag_test_exceptions): Likewise.
(flag_test_finite): Likewise.
(flag_test_inline): Likewise.
(flag_test_mathvec): Likewise.
(test_msg): Likewise.
(NO_EXCEPTION): Remove.
(INVALID_EXCEPTION): Likewise.
(DIVIDE_BY_ZERO_EXCEPTION): Likewise.
(OVERFLOW_EXCEPTION): Likewise.
(UNDERFLOW_EXCEPTION): Likewise.
(INEXACT_EXCEPTION): Likewise.
(INVALID_EXCEPTION_OK): Likewise.
(DIVIDE_BY_ZERO_EXCEPTION_OK): Likewise.
(OVERFLOW_EXCEPTION_OK): Likewise.
(UNDERFLOW_EXCEPTION_OK): Likewise.
(NO_INEXACT_EXCEPTION): Likewise.
(EXCEPTIONS_OK): Likewise.
(IGNORE_ZERO_INF_SIGN): Likewise.
(TEST_NAN_SIGN): Likewise.
(TEST_NAN_PAYLOAD): Likewise.
(NO_TEST_INLINE): Likewise.
(XFAIL_TEST): Likewise.
(ERRNO_UNCHANGED): Likewise.
(ERRNO_EDOM): Likewise.
(ERRNO_ERANGE): Likewise.
(IGNORE_RESULT): Likewise.
(NON_FINITE): Likewise.
(TEST_SNAN): Likewise.
(NO_TEST_MATHVEC): Likewise.
(__CONCATX): Likewise.
(TYPE_MIN): Likewise.
(TYPE_TRUE_MIN): Likewise.
(TYPE_MAX): Likewise.
(MIN_EXP): Likewise.
(MAX_EXP): Likewise.
(MANT_DIG): Likewise.
(FSTR_MAX): Likewise.
(ulp_idx): Likewise.
(qtype_str): Remove static.
(TEST_COND_binary32): Remove.
(TEST_COND_binary64): Likewise.
(TEST_COND_binary128): Likewise.
(TEST_COND_ibm128): Likewise.
(TEST_COND_intel96): Likewise.
(TEST_COND_m68k96): Likewise.
(TEST_COND_ibm128_libgcc): Likewise.
(XFAIL_IBM128_LIBGCC): Likewise.
(PAYLOAD_DIG): Likewise.
(UNDERFLOW_EXCEPTION_FLOAT): Likewise.
(UNDERFLOW_EXCEPTION_OK_FLOAT): Likewise.
(UNDERFLOW_EXCEPTION_DOUBLE): Likewise.
(UNDERFLOW_EXCEPTION_OK_DOUBLE): Likewise.
(UNDERFLOW_EXCEPTION_LDOUBLE_IBM): Likewise.
(UNDERFLOW_EXCEPTION_BEFORE_ROUNDING): Likewise.
(TEST_COND_long32): Likewise.
(TEST_COND_long64): Likewise.
(TEST_COND_before_rounding): Likewise.
(TEST_COND_after_rounding): Likewise.
(ulps_file_name): Likewise.
(ulps_file): Likewise.
(output_ulps): Likewise.
(output_dir): Likewise.
(noErrors): Likewise.
(noTests): Likewise.
(noExcTests): Likewise.
(noErrnoTests): Likewise.
(verbose): Likewise.
(output_max_error): Likewise.
(output_points): Likewise.
(ignore_max_ulp): Likewise.
(max_error): Likewise.
(real_max_error): Likewise.
(imag_max_error): Likewise.
(prev_max_error): Likewise.
(prev_real_max_error): Likewise.
(prev_imag_max_error): Likewise.
(max_valid_error): Likewise.
(TYPE_DECIMAL_DIG): Likewise.
(TYPE_HEX_DIG): Likewise.
(fmt_ftostr): Likewise.
(compare_ulp_data): Likewise.
(find_ulps): Likewise.
(init_max_error): Likewise.
(set_max_error): Likewise.
(print_float): Likewise.
(print_screen): Likewise.
(print_screen_max_error): Likewise.
(update_stats): Likewise.
(print_function_ulps): Likewise.
(print_complex_function_ulps): Likewise.
(fpstack_test): Likewise.
(print_max_error): Likewise.
(print_complex_max_error): Likewise.
(test_single_exception): Likewise.
(test_exceptions): Likewise.
(test_single_errno): Likewise.
(test_errno): Likewise.
(ULPDIFF): Likewise.
(ulp): Likewise.
(check_float_internal): Likewise.
(check_float): Likewise.
(check_complex): Likewise.
(check_int): Likewise.
(check_long): Likewise.
(check_bool): Likewise.
(check_longlong): Likewise.
(check_intmax_t): Likewise.
(check_uintmax_t): Likewise.
(enable_test): Likewise.
(matherr): Likewise.
(initialize): Likewise.
(options): Likewise.
(doc): Remove static.
(argp): Likewise.
(parse_opt): Remove.
(check_ulp): Likewise.
(libm_test_init): Likewise.
(libm_test_finish): Likewise.
* math/Makefile (libm-test-support): New variable.
(test-extras): Add libm-test-support files.
(extra-test-objs): Likewise.
(CFLAGS-libm-test-support-float.c): New variable.
(CFLAGS-libm-test-support-double.c): Likewise.
(CFLAGS-libm-test-support-ldouble.c): Likewise.
($(addprefix $(objpfx),$(libm-tests)): Depend on appropriate
libm-test-support objects.
2017-02-08 21:11:49 +00:00
|
|
|
errno = 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
/* Check that computed and expected values are equal (intmax_t values). */
|
|
|
|
void
|
|
|
|
check_intmax_t (const char *test_name, intmax_t computed,
|
|
|
|
intmax_t expected, int exceptions)
|
|
|
|
{
|
|
|
|
int ok = 0;
|
|
|
|
int errno_value = errno;
|
|
|
|
|
|
|
|
test_exceptions (test_name, exceptions);
|
|
|
|
test_errno (test_name, errno_value, exceptions);
|
|
|
|
if (exceptions & IGNORE_RESULT)
|
|
|
|
goto out;
|
|
|
|
noTests++;
|
|
|
|
if (computed == expected)
|
|
|
|
ok = 1;
|
|
|
|
|
|
|
|
if (print_screen (ok))
|
|
|
|
{
|
|
|
|
if (!ok)
|
|
|
|
printf ("Failure:");
|
|
|
|
printf ("Test: %s\n", test_name);
|
|
|
|
printf ("Result:\n");
|
|
|
|
printf (" is: %jd\n", computed);
|
|
|
|
printf (" should be: %jd\n", expected);
|
|
|
|
}
|
|
|
|
|
|
|
|
update_stats (ok);
|
|
|
|
out:
|
|
|
|
fpstack_test (test_name);
|
2017-06-23 20:10:45 +00:00
|
|
|
feclearexcept (FE_ALL_EXCEPT);
|
Build most libm-test support code once per type.
libm-test-driver.c contains various functions used in the course of
libm testing, which are built as part of each test using this
machinery.
Currently, these functions get built for three tests for each type
(e.g. test-float, test-ifloat, test-float-finite), plus the vector
function tests. All these tests are huge and thus slow to build; the
output of gen-libm-test.pl totals around 40 MB across all functions.
To make the individual tests built from the Makefile smaller, it makes
sense to split these tests up so the tests for each function are built
separately (thus, three tests for each (function, type) pair, plus
vector tests built only for functions that actually have vector
versions). This improves parallelism and means that if tests fail,
the summary of failed tests makes it more obvious where the problem
might be without needing to look in the .out files to see which
functions' tests failed (though architecture maintainers still need to
keep libm-test-ulps up to date to avoid spurious failures of little
interest).
Simply including libm-test-driver.c as-is in such individual-function
tests does not work because of unused static check_* functions (those
functions only being used for the types of the outputs of the function
under test). It also means the common code gets built over 1000 times
instead of nine (plus vector tests). To avoid that issue, this patch
splits out the bulk of the libm-test-driver.c code into a separate
file libm-test-support.c (with a few functions made non-static). That
separate file is built only once for each floating-point type (so at
present three times, or twice on architectures with long double =
double). Definitions needed in both libm-test-support.c and
libm-test-driver.c go in libm-test-support.h (it's possible some of
those are in fact only needed in one of the two files).
libm-test-driver.c keeps definitions of a limited number of variables
used to configure how libm-test-support.c behaves, various macros and
structures needed by individual-function tests, and the main function.
This move is also consistent in spirit with the move away from
test-skeleton.c having all the test support code, to a small
support/test-driver.c included in individual tests with most of the
code built separately.
Tested for x86_64 and x86.
* math/libm-test-support.c: New file. Content from
math/libm-test-driver.c.
* math/libm-test-support.h: Likewise.
* math/libm-test-support-double.c: New file.
* math/libm-test-support-float.c: Likewise.
* math/libm-test-support-ldouble.c: Likewise.
* math/libm-test-driver.c: Remove main comment and header
includes. Include libm-test-support.h.
[!_GNU_SOURCE] (_GNU_SOURCE): Do not define.
(flag_test_errno): Remove static.
(flag_test_exceptions): Likewise.
(flag_test_finite): Likewise.
(flag_test_inline): Likewise.
(flag_test_mathvec): Likewise.
(test_msg): Likewise.
(NO_EXCEPTION): Remove.
(INVALID_EXCEPTION): Likewise.
(DIVIDE_BY_ZERO_EXCEPTION): Likewise.
(OVERFLOW_EXCEPTION): Likewise.
(UNDERFLOW_EXCEPTION): Likewise.
(INEXACT_EXCEPTION): Likewise.
(INVALID_EXCEPTION_OK): Likewise.
(DIVIDE_BY_ZERO_EXCEPTION_OK): Likewise.
(OVERFLOW_EXCEPTION_OK): Likewise.
(UNDERFLOW_EXCEPTION_OK): Likewise.
(NO_INEXACT_EXCEPTION): Likewise.
(EXCEPTIONS_OK): Likewise.
(IGNORE_ZERO_INF_SIGN): Likewise.
(TEST_NAN_SIGN): Likewise.
(TEST_NAN_PAYLOAD): Likewise.
(NO_TEST_INLINE): Likewise.
(XFAIL_TEST): Likewise.
(ERRNO_UNCHANGED): Likewise.
(ERRNO_EDOM): Likewise.
(ERRNO_ERANGE): Likewise.
(IGNORE_RESULT): Likewise.
(NON_FINITE): Likewise.
(TEST_SNAN): Likewise.
(NO_TEST_MATHVEC): Likewise.
(__CONCATX): Likewise.
(TYPE_MIN): Likewise.
(TYPE_TRUE_MIN): Likewise.
(TYPE_MAX): Likewise.
(MIN_EXP): Likewise.
(MAX_EXP): Likewise.
(MANT_DIG): Likewise.
(FSTR_MAX): Likewise.
(ulp_idx): Likewise.
(qtype_str): Remove static.
(TEST_COND_binary32): Remove.
(TEST_COND_binary64): Likewise.
(TEST_COND_binary128): Likewise.
(TEST_COND_ibm128): Likewise.
(TEST_COND_intel96): Likewise.
(TEST_COND_m68k96): Likewise.
(TEST_COND_ibm128_libgcc): Likewise.
(XFAIL_IBM128_LIBGCC): Likewise.
(PAYLOAD_DIG): Likewise.
(UNDERFLOW_EXCEPTION_FLOAT): Likewise.
(UNDERFLOW_EXCEPTION_OK_FLOAT): Likewise.
(UNDERFLOW_EXCEPTION_DOUBLE): Likewise.
(UNDERFLOW_EXCEPTION_OK_DOUBLE): Likewise.
(UNDERFLOW_EXCEPTION_LDOUBLE_IBM): Likewise.
(UNDERFLOW_EXCEPTION_BEFORE_ROUNDING): Likewise.
(TEST_COND_long32): Likewise.
(TEST_COND_long64): Likewise.
(TEST_COND_before_rounding): Likewise.
(TEST_COND_after_rounding): Likewise.
(ulps_file_name): Likewise.
(ulps_file): Likewise.
(output_ulps): Likewise.
(output_dir): Likewise.
(noErrors): Likewise.
(noTests): Likewise.
(noExcTests): Likewise.
(noErrnoTests): Likewise.
(verbose): Likewise.
(output_max_error): Likewise.
(output_points): Likewise.
(ignore_max_ulp): Likewise.
(max_error): Likewise.
(real_max_error): Likewise.
(imag_max_error): Likewise.
(prev_max_error): Likewise.
(prev_real_max_error): Likewise.
(prev_imag_max_error): Likewise.
(max_valid_error): Likewise.
(TYPE_DECIMAL_DIG): Likewise.
(TYPE_HEX_DIG): Likewise.
(fmt_ftostr): Likewise.
(compare_ulp_data): Likewise.
(find_ulps): Likewise.
(init_max_error): Likewise.
(set_max_error): Likewise.
(print_float): Likewise.
(print_screen): Likewise.
(print_screen_max_error): Likewise.
(update_stats): Likewise.
(print_function_ulps): Likewise.
(print_complex_function_ulps): Likewise.
(fpstack_test): Likewise.
(print_max_error): Likewise.
(print_complex_max_error): Likewise.
(test_single_exception): Likewise.
(test_exceptions): Likewise.
(test_single_errno): Likewise.
(test_errno): Likewise.
(ULPDIFF): Likewise.
(ulp): Likewise.
(check_float_internal): Likewise.
(check_float): Likewise.
(check_complex): Likewise.
(check_int): Likewise.
(check_long): Likewise.
(check_bool): Likewise.
(check_longlong): Likewise.
(check_intmax_t): Likewise.
(check_uintmax_t): Likewise.
(enable_test): Likewise.
(matherr): Likewise.
(initialize): Likewise.
(options): Likewise.
(doc): Remove static.
(argp): Likewise.
(parse_opt): Remove.
(check_ulp): Likewise.
(libm_test_init): Likewise.
(libm_test_finish): Likewise.
* math/Makefile (libm-test-support): New variable.
(test-extras): Add libm-test-support files.
(extra-test-objs): Likewise.
(CFLAGS-libm-test-support-float.c): New variable.
(CFLAGS-libm-test-support-double.c): Likewise.
(CFLAGS-libm-test-support-ldouble.c): Likewise.
($(addprefix $(objpfx),$(libm-tests)): Depend on appropriate
libm-test-support objects.
2017-02-08 21:11:49 +00:00
|
|
|
errno = 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
/* Check that computed and expected values are equal (uintmax_t values). */
|
|
|
|
void
|
|
|
|
check_uintmax_t (const char *test_name, uintmax_t computed,
|
|
|
|
uintmax_t expected, int exceptions)
|
|
|
|
{
|
|
|
|
int ok = 0;
|
|
|
|
int errno_value = errno;
|
|
|
|
|
|
|
|
test_exceptions (test_name, exceptions);
|
|
|
|
test_errno (test_name, errno_value, exceptions);
|
|
|
|
if (exceptions & IGNORE_RESULT)
|
|
|
|
goto out;
|
|
|
|
noTests++;
|
|
|
|
if (computed == expected)
|
|
|
|
ok = 1;
|
|
|
|
|
|
|
|
if (print_screen (ok))
|
|
|
|
{
|
|
|
|
if (!ok)
|
|
|
|
printf ("Failure:");
|
|
|
|
printf ("Test: %s\n", test_name);
|
|
|
|
printf ("Result:\n");
|
|
|
|
printf (" is: %ju\n", computed);
|
|
|
|
printf (" should be: %ju\n", expected);
|
|
|
|
}
|
|
|
|
|
|
|
|
update_stats (ok);
|
|
|
|
out:
|
|
|
|
fpstack_test (test_name);
|
2017-06-23 20:10:45 +00:00
|
|
|
feclearexcept (FE_ALL_EXCEPT);
|
Build most libm-test support code once per type.
libm-test-driver.c contains various functions used in the course of
libm testing, which are built as part of each test using this
machinery.
Currently, these functions get built for three tests for each type
(e.g. test-float, test-ifloat, test-float-finite), plus the vector
function tests. All these tests are huge and thus slow to build; the
output of gen-libm-test.pl totals around 40 MB across all functions.
To make the individual tests built from the Makefile smaller, it makes
sense to split these tests up so the tests for each function are built
separately (thus, three tests for each (function, type) pair, plus
vector tests built only for functions that actually have vector
versions). This improves parallelism and means that if tests fail,
the summary of failed tests makes it more obvious where the problem
might be without needing to look in the .out files to see which
functions' tests failed (though architecture maintainers still need to
keep libm-test-ulps up to date to avoid spurious failures of little
interest).
Simply including libm-test-driver.c as-is in such individual-function
tests does not work because of unused static check_* functions (those
functions only being used for the types of the outputs of the function
under test). It also means the common code gets built over 1000 times
instead of nine (plus vector tests). To avoid that issue, this patch
splits out the bulk of the libm-test-driver.c code into a separate
file libm-test-support.c (with a few functions made non-static). That
separate file is built only once for each floating-point type (so at
present three times, or twice on architectures with long double =
double). Definitions needed in both libm-test-support.c and
libm-test-driver.c go in libm-test-support.h (it's possible some of
those are in fact only needed in one of the two files).
libm-test-driver.c keeps definitions of a limited number of variables
used to configure how libm-test-support.c behaves, various macros and
structures needed by individual-function tests, and the main function.
This move is also consistent in spirit with the move away from
test-skeleton.c having all the test support code, to a small
support/test-driver.c included in individual tests with most of the
code built separately.
Tested for x86_64 and x86.
* math/libm-test-support.c: New file. Content from
math/libm-test-driver.c.
* math/libm-test-support.h: Likewise.
* math/libm-test-support-double.c: New file.
* math/libm-test-support-float.c: Likewise.
* math/libm-test-support-ldouble.c: Likewise.
* math/libm-test-driver.c: Remove main comment and header
includes. Include libm-test-support.h.
[!_GNU_SOURCE] (_GNU_SOURCE): Do not define.
(flag_test_errno): Remove static.
(flag_test_exceptions): Likewise.
(flag_test_finite): Likewise.
(flag_test_inline): Likewise.
(flag_test_mathvec): Likewise.
(test_msg): Likewise.
(NO_EXCEPTION): Remove.
(INVALID_EXCEPTION): Likewise.
(DIVIDE_BY_ZERO_EXCEPTION): Likewise.
(OVERFLOW_EXCEPTION): Likewise.
(UNDERFLOW_EXCEPTION): Likewise.
(INEXACT_EXCEPTION): Likewise.
(INVALID_EXCEPTION_OK): Likewise.
(DIVIDE_BY_ZERO_EXCEPTION_OK): Likewise.
(OVERFLOW_EXCEPTION_OK): Likewise.
(UNDERFLOW_EXCEPTION_OK): Likewise.
(NO_INEXACT_EXCEPTION): Likewise.
(EXCEPTIONS_OK): Likewise.
(IGNORE_ZERO_INF_SIGN): Likewise.
(TEST_NAN_SIGN): Likewise.
(TEST_NAN_PAYLOAD): Likewise.
(NO_TEST_INLINE): Likewise.
(XFAIL_TEST): Likewise.
(ERRNO_UNCHANGED): Likewise.
(ERRNO_EDOM): Likewise.
(ERRNO_ERANGE): Likewise.
(IGNORE_RESULT): Likewise.
(NON_FINITE): Likewise.
(TEST_SNAN): Likewise.
(NO_TEST_MATHVEC): Likewise.
(__CONCATX): Likewise.
(TYPE_MIN): Likewise.
(TYPE_TRUE_MIN): Likewise.
(TYPE_MAX): Likewise.
(MIN_EXP): Likewise.
(MAX_EXP): Likewise.
(MANT_DIG): Likewise.
(FSTR_MAX): Likewise.
(ulp_idx): Likewise.
(qtype_str): Remove static.
(TEST_COND_binary32): Remove.
(TEST_COND_binary64): Likewise.
(TEST_COND_binary128): Likewise.
(TEST_COND_ibm128): Likewise.
(TEST_COND_intel96): Likewise.
(TEST_COND_m68k96): Likewise.
(TEST_COND_ibm128_libgcc): Likewise.
(XFAIL_IBM128_LIBGCC): Likewise.
(PAYLOAD_DIG): Likewise.
(UNDERFLOW_EXCEPTION_FLOAT): Likewise.
(UNDERFLOW_EXCEPTION_OK_FLOAT): Likewise.
(UNDERFLOW_EXCEPTION_DOUBLE): Likewise.
(UNDERFLOW_EXCEPTION_OK_DOUBLE): Likewise.
(UNDERFLOW_EXCEPTION_LDOUBLE_IBM): Likewise.
(UNDERFLOW_EXCEPTION_BEFORE_ROUNDING): Likewise.
(TEST_COND_long32): Likewise.
(TEST_COND_long64): Likewise.
(TEST_COND_before_rounding): Likewise.
(TEST_COND_after_rounding): Likewise.
(ulps_file_name): Likewise.
(ulps_file): Likewise.
(output_ulps): Likewise.
(output_dir): Likewise.
(noErrors): Likewise.
(noTests): Likewise.
(noExcTests): Likewise.
(noErrnoTests): Likewise.
(verbose): Likewise.
(output_max_error): Likewise.
(output_points): Likewise.
(ignore_max_ulp): Likewise.
(max_error): Likewise.
(real_max_error): Likewise.
(imag_max_error): Likewise.
(prev_max_error): Likewise.
(prev_real_max_error): Likewise.
(prev_imag_max_error): Likewise.
(max_valid_error): Likewise.
(TYPE_DECIMAL_DIG): Likewise.
(TYPE_HEX_DIG): Likewise.
(fmt_ftostr): Likewise.
(compare_ulp_data): Likewise.
(find_ulps): Likewise.
(init_max_error): Likewise.
(set_max_error): Likewise.
(print_float): Likewise.
(print_screen): Likewise.
(print_screen_max_error): Likewise.
(update_stats): Likewise.
(print_function_ulps): Likewise.
(print_complex_function_ulps): Likewise.
(fpstack_test): Likewise.
(print_max_error): Likewise.
(print_complex_max_error): Likewise.
(test_single_exception): Likewise.
(test_exceptions): Likewise.
(test_single_errno): Likewise.
(test_errno): Likewise.
(ULPDIFF): Likewise.
(ulp): Likewise.
(check_float_internal): Likewise.
(check_float): Likewise.
(check_complex): Likewise.
(check_int): Likewise.
(check_long): Likewise.
(check_bool): Likewise.
(check_longlong): Likewise.
(check_intmax_t): Likewise.
(check_uintmax_t): Likewise.
(enable_test): Likewise.
(matherr): Likewise.
(initialize): Likewise.
(options): Likewise.
(doc): Remove static.
(argp): Likewise.
(parse_opt): Remove.
(check_ulp): Likewise.
(libm_test_init): Likewise.
(libm_test_finish): Likewise.
* math/Makefile (libm-test-support): New variable.
(test-extras): Add libm-test-support files.
(extra-test-objs): Likewise.
(CFLAGS-libm-test-support-float.c): New variable.
(CFLAGS-libm-test-support-double.c): Likewise.
(CFLAGS-libm-test-support-ldouble.c): Likewise.
($(addprefix $(objpfx),$(libm-tests)): Depend on appropriate
libm-test-support objects.
2017-02-08 21:11:49 +00:00
|
|
|
errno = 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Return whether a test with flags EXCEPTIONS should be run. */
|
|
|
|
int
|
|
|
|
enable_test (int exceptions)
|
|
|
|
{
|
|
|
|
if (exceptions & XFAIL_TEST)
|
|
|
|
return 0;
|
2018-02-09 22:56:35 +00:00
|
|
|
if ((!SNAN_TESTS (FLOAT) || !snan_tests_arg)
|
|
|
|
&& (exceptions & TEST_SNAN) != 0)
|
Build most libm-test support code once per type.
libm-test-driver.c contains various functions used in the course of
libm testing, which are built as part of each test using this
machinery.
Currently, these functions get built for three tests for each type
(e.g. test-float, test-ifloat, test-float-finite), plus the vector
function tests. All these tests are huge and thus slow to build; the
output of gen-libm-test.pl totals around 40 MB across all functions.
To make the individual tests built from the Makefile smaller, it makes
sense to split these tests up so the tests for each function are built
separately (thus, three tests for each (function, type) pair, plus
vector tests built only for functions that actually have vector
versions). This improves parallelism and means that if tests fail,
the summary of failed tests makes it more obvious where the problem
might be without needing to look in the .out files to see which
functions' tests failed (though architecture maintainers still need to
keep libm-test-ulps up to date to avoid spurious failures of little
interest).
Simply including libm-test-driver.c as-is in such individual-function
tests does not work because of unused static check_* functions (those
functions only being used for the types of the outputs of the function
under test). It also means the common code gets built over 1000 times
instead of nine (plus vector tests). To avoid that issue, this patch
splits out the bulk of the libm-test-driver.c code into a separate
file libm-test-support.c (with a few functions made non-static). That
separate file is built only once for each floating-point type (so at
present three times, or twice on architectures with long double =
double). Definitions needed in both libm-test-support.c and
libm-test-driver.c go in libm-test-support.h (it's possible some of
those are in fact only needed in one of the two files).
libm-test-driver.c keeps definitions of a limited number of variables
used to configure how libm-test-support.c behaves, various macros and
structures needed by individual-function tests, and the main function.
This move is also consistent in spirit with the move away from
test-skeleton.c having all the test support code, to a small
support/test-driver.c included in individual tests with most of the
code built separately.
Tested for x86_64 and x86.
* math/libm-test-support.c: New file. Content from
math/libm-test-driver.c.
* math/libm-test-support.h: Likewise.
* math/libm-test-support-double.c: New file.
* math/libm-test-support-float.c: Likewise.
* math/libm-test-support-ldouble.c: Likewise.
* math/libm-test-driver.c: Remove main comment and header
includes. Include libm-test-support.h.
[!_GNU_SOURCE] (_GNU_SOURCE): Do not define.
(flag_test_errno): Remove static.
(flag_test_exceptions): Likewise.
(flag_test_finite): Likewise.
(flag_test_inline): Likewise.
(flag_test_mathvec): Likewise.
(test_msg): Likewise.
(NO_EXCEPTION): Remove.
(INVALID_EXCEPTION): Likewise.
(DIVIDE_BY_ZERO_EXCEPTION): Likewise.
(OVERFLOW_EXCEPTION): Likewise.
(UNDERFLOW_EXCEPTION): Likewise.
(INEXACT_EXCEPTION): Likewise.
(INVALID_EXCEPTION_OK): Likewise.
(DIVIDE_BY_ZERO_EXCEPTION_OK): Likewise.
(OVERFLOW_EXCEPTION_OK): Likewise.
(UNDERFLOW_EXCEPTION_OK): Likewise.
(NO_INEXACT_EXCEPTION): Likewise.
(EXCEPTIONS_OK): Likewise.
(IGNORE_ZERO_INF_SIGN): Likewise.
(TEST_NAN_SIGN): Likewise.
(TEST_NAN_PAYLOAD): Likewise.
(NO_TEST_INLINE): Likewise.
(XFAIL_TEST): Likewise.
(ERRNO_UNCHANGED): Likewise.
(ERRNO_EDOM): Likewise.
(ERRNO_ERANGE): Likewise.
(IGNORE_RESULT): Likewise.
(NON_FINITE): Likewise.
(TEST_SNAN): Likewise.
(NO_TEST_MATHVEC): Likewise.
(__CONCATX): Likewise.
(TYPE_MIN): Likewise.
(TYPE_TRUE_MIN): Likewise.
(TYPE_MAX): Likewise.
(MIN_EXP): Likewise.
(MAX_EXP): Likewise.
(MANT_DIG): Likewise.
(FSTR_MAX): Likewise.
(ulp_idx): Likewise.
(qtype_str): Remove static.
(TEST_COND_binary32): Remove.
(TEST_COND_binary64): Likewise.
(TEST_COND_binary128): Likewise.
(TEST_COND_ibm128): Likewise.
(TEST_COND_intel96): Likewise.
(TEST_COND_m68k96): Likewise.
(TEST_COND_ibm128_libgcc): Likewise.
(XFAIL_IBM128_LIBGCC): Likewise.
(PAYLOAD_DIG): Likewise.
(UNDERFLOW_EXCEPTION_FLOAT): Likewise.
(UNDERFLOW_EXCEPTION_OK_FLOAT): Likewise.
(UNDERFLOW_EXCEPTION_DOUBLE): Likewise.
(UNDERFLOW_EXCEPTION_OK_DOUBLE): Likewise.
(UNDERFLOW_EXCEPTION_LDOUBLE_IBM): Likewise.
(UNDERFLOW_EXCEPTION_BEFORE_ROUNDING): Likewise.
(TEST_COND_long32): Likewise.
(TEST_COND_long64): Likewise.
(TEST_COND_before_rounding): Likewise.
(TEST_COND_after_rounding): Likewise.
(ulps_file_name): Likewise.
(ulps_file): Likewise.
(output_ulps): Likewise.
(output_dir): Likewise.
(noErrors): Likewise.
(noTests): Likewise.
(noExcTests): Likewise.
(noErrnoTests): Likewise.
(verbose): Likewise.
(output_max_error): Likewise.
(output_points): Likewise.
(ignore_max_ulp): Likewise.
(max_error): Likewise.
(real_max_error): Likewise.
(imag_max_error): Likewise.
(prev_max_error): Likewise.
(prev_real_max_error): Likewise.
(prev_imag_max_error): Likewise.
(max_valid_error): Likewise.
(TYPE_DECIMAL_DIG): Likewise.
(TYPE_HEX_DIG): Likewise.
(fmt_ftostr): Likewise.
(compare_ulp_data): Likewise.
(find_ulps): Likewise.
(init_max_error): Likewise.
(set_max_error): Likewise.
(print_float): Likewise.
(print_screen): Likewise.
(print_screen_max_error): Likewise.
(update_stats): Likewise.
(print_function_ulps): Likewise.
(print_complex_function_ulps): Likewise.
(fpstack_test): Likewise.
(print_max_error): Likewise.
(print_complex_max_error): Likewise.
(test_single_exception): Likewise.
(test_exceptions): Likewise.
(test_single_errno): Likewise.
(test_errno): Likewise.
(ULPDIFF): Likewise.
(ulp): Likewise.
(check_float_internal): Likewise.
(check_float): Likewise.
(check_complex): Likewise.
(check_int): Likewise.
(check_long): Likewise.
(check_bool): Likewise.
(check_longlong): Likewise.
(check_intmax_t): Likewise.
(check_uintmax_t): Likewise.
(enable_test): Likewise.
(matherr): Likewise.
(initialize): Likewise.
(options): Likewise.
(doc): Remove static.
(argp): Likewise.
(parse_opt): Remove.
(check_ulp): Likewise.
(libm_test_init): Likewise.
(libm_test_finish): Likewise.
* math/Makefile (libm-test-support): New variable.
(test-extras): Add libm-test-support files.
(extra-test-objs): Likewise.
(CFLAGS-libm-test-support-float.c): New variable.
(CFLAGS-libm-test-support-double.c): Likewise.
(CFLAGS-libm-test-support-ldouble.c): Likewise.
($(addprefix $(objpfx),$(libm-tests)): Depend on appropriate
libm-test-support objects.
2017-02-08 21:11:49 +00:00
|
|
|
return 0;
|
|
|
|
if (flag_test_mathvec && (exceptions & NO_TEST_MATHVEC) != 0)
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
return 1;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
initialize (void)
|
|
|
|
{
|
|
|
|
fpstack_test ("start *init*");
|
|
|
|
|
|
|
|
/* Clear all exceptions. From now on we must not get random exceptions. */
|
|
|
|
feclearexcept (FE_ALL_EXCEPT);
|
|
|
|
errno = 0;
|
|
|
|
|
|
|
|
/* Test to make sure we start correctly. */
|
|
|
|
fpstack_test ("end *init*");
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Definitions of arguments for argp functions. */
|
|
|
|
static const struct argp_option options[] =
|
|
|
|
{
|
|
|
|
{ "verbose", 'v', "NUMBER", 0, "Level of verbosity (0..3)"},
|
|
|
|
{ "ulps-file", 'u', NULL, 0, "Output ulps to file ULPs"},
|
|
|
|
{ "no-max-error", 'f', NULL, 0,
|
|
|
|
"Don't output maximal errors of functions"},
|
|
|
|
{ "no-points", 'p', NULL, 0,
|
|
|
|
"Don't output results of functions invocations"},
|
|
|
|
{ "ignore-max-ulp", 'i', "yes/no", 0,
|
|
|
|
"Ignore given maximal errors"},
|
|
|
|
{ "output-dir", 'o', "DIR", 0,
|
|
|
|
"Directory where generated files will be placed"},
|
|
|
|
{ NULL, 0, NULL, 0, NULL }
|
|
|
|
};
|
|
|
|
|
|
|
|
/* Prototype for option handler. */
|
|
|
|
static error_t parse_opt (int key, char *arg, struct argp_state *state);
|
|
|
|
|
|
|
|
/* Data structure to communicate with argp functions. */
|
|
|
|
static struct argp argp =
|
|
|
|
{
|
|
|
|
options, parse_opt, NULL, doc,
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
|
|
/* Handle program arguments. */
|
|
|
|
static error_t
|
|
|
|
parse_opt (int key, char *arg, struct argp_state *state)
|
|
|
|
{
|
|
|
|
switch (key)
|
|
|
|
{
|
|
|
|
case 'f':
|
|
|
|
output_max_error = 0;
|
|
|
|
break;
|
|
|
|
case 'i':
|
|
|
|
if (strcmp (arg, "yes") == 0)
|
|
|
|
ignore_max_ulp = 1;
|
|
|
|
else if (strcmp (arg, "no") == 0)
|
|
|
|
ignore_max_ulp = 0;
|
|
|
|
break;
|
|
|
|
case 'o':
|
|
|
|
output_dir = (char *) malloc (strlen (arg) + 1);
|
|
|
|
if (output_dir != NULL)
|
|
|
|
strcpy (output_dir, arg);
|
|
|
|
else
|
|
|
|
return errno;
|
|
|
|
break;
|
|
|
|
case 'p':
|
|
|
|
output_points = 0;
|
|
|
|
break;
|
|
|
|
case 'u':
|
|
|
|
output_ulps = 1;
|
|
|
|
break;
|
|
|
|
case 'v':
|
|
|
|
if (optarg)
|
|
|
|
verbose = (unsigned int) strtoul (optarg, NULL, 0);
|
|
|
|
else
|
|
|
|
verbose = 3;
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
return ARGP_ERR_UNKNOWN;
|
|
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Verify that our ulp () implementation is behaving as expected
|
|
|
|
or abort. */
|
|
|
|
static void
|
|
|
|
check_ulp (void)
|
|
|
|
{
|
|
|
|
FLOAT ulps, ulpx, value;
|
|
|
|
int i;
|
|
|
|
/* Check ulp of zero is a subnormal value... */
|
|
|
|
ulps = ulp (0x0.0p0);
|
|
|
|
if (fpclassify (ulps) != FP_SUBNORMAL)
|
|
|
|
{
|
|
|
|
fprintf (stderr, "ulp (0x0.0p0) is not FP_SUBNORMAL!\n");
|
|
|
|
exit (EXIT_FAILURE);
|
|
|
|
}
|
|
|
|
/* Check that the ulp of one is a normal value... */
|
2017-02-25 00:14:09 +00:00
|
|
|
ulps = ulp (LIT(1.0));
|
Build most libm-test support code once per type.
libm-test-driver.c contains various functions used in the course of
libm testing, which are built as part of each test using this
machinery.
Currently, these functions get built for three tests for each type
(e.g. test-float, test-ifloat, test-float-finite), plus the vector
function tests. All these tests are huge and thus slow to build; the
output of gen-libm-test.pl totals around 40 MB across all functions.
To make the individual tests built from the Makefile smaller, it makes
sense to split these tests up so the tests for each function are built
separately (thus, three tests for each (function, type) pair, plus
vector tests built only for functions that actually have vector
versions). This improves parallelism and means that if tests fail,
the summary of failed tests makes it more obvious where the problem
might be without needing to look in the .out files to see which
functions' tests failed (though architecture maintainers still need to
keep libm-test-ulps up to date to avoid spurious failures of little
interest).
Simply including libm-test-driver.c as-is in such individual-function
tests does not work because of unused static check_* functions (those
functions only being used for the types of the outputs of the function
under test). It also means the common code gets built over 1000 times
instead of nine (plus vector tests). To avoid that issue, this patch
splits out the bulk of the libm-test-driver.c code into a separate
file libm-test-support.c (with a few functions made non-static). That
separate file is built only once for each floating-point type (so at
present three times, or twice on architectures with long double =
double). Definitions needed in both libm-test-support.c and
libm-test-driver.c go in libm-test-support.h (it's possible some of
those are in fact only needed in one of the two files).
libm-test-driver.c keeps definitions of a limited number of variables
used to configure how libm-test-support.c behaves, various macros and
structures needed by individual-function tests, and the main function.
This move is also consistent in spirit with the move away from
test-skeleton.c having all the test support code, to a small
support/test-driver.c included in individual tests with most of the
code built separately.
Tested for x86_64 and x86.
* math/libm-test-support.c: New file. Content from
math/libm-test-driver.c.
* math/libm-test-support.h: Likewise.
* math/libm-test-support-double.c: New file.
* math/libm-test-support-float.c: Likewise.
* math/libm-test-support-ldouble.c: Likewise.
* math/libm-test-driver.c: Remove main comment and header
includes. Include libm-test-support.h.
[!_GNU_SOURCE] (_GNU_SOURCE): Do not define.
(flag_test_errno): Remove static.
(flag_test_exceptions): Likewise.
(flag_test_finite): Likewise.
(flag_test_inline): Likewise.
(flag_test_mathvec): Likewise.
(test_msg): Likewise.
(NO_EXCEPTION): Remove.
(INVALID_EXCEPTION): Likewise.
(DIVIDE_BY_ZERO_EXCEPTION): Likewise.
(OVERFLOW_EXCEPTION): Likewise.
(UNDERFLOW_EXCEPTION): Likewise.
(INEXACT_EXCEPTION): Likewise.
(INVALID_EXCEPTION_OK): Likewise.
(DIVIDE_BY_ZERO_EXCEPTION_OK): Likewise.
(OVERFLOW_EXCEPTION_OK): Likewise.
(UNDERFLOW_EXCEPTION_OK): Likewise.
(NO_INEXACT_EXCEPTION): Likewise.
(EXCEPTIONS_OK): Likewise.
(IGNORE_ZERO_INF_SIGN): Likewise.
(TEST_NAN_SIGN): Likewise.
(TEST_NAN_PAYLOAD): Likewise.
(NO_TEST_INLINE): Likewise.
(XFAIL_TEST): Likewise.
(ERRNO_UNCHANGED): Likewise.
(ERRNO_EDOM): Likewise.
(ERRNO_ERANGE): Likewise.
(IGNORE_RESULT): Likewise.
(NON_FINITE): Likewise.
(TEST_SNAN): Likewise.
(NO_TEST_MATHVEC): Likewise.
(__CONCATX): Likewise.
(TYPE_MIN): Likewise.
(TYPE_TRUE_MIN): Likewise.
(TYPE_MAX): Likewise.
(MIN_EXP): Likewise.
(MAX_EXP): Likewise.
(MANT_DIG): Likewise.
(FSTR_MAX): Likewise.
(ulp_idx): Likewise.
(qtype_str): Remove static.
(TEST_COND_binary32): Remove.
(TEST_COND_binary64): Likewise.
(TEST_COND_binary128): Likewise.
(TEST_COND_ibm128): Likewise.
(TEST_COND_intel96): Likewise.
(TEST_COND_m68k96): Likewise.
(TEST_COND_ibm128_libgcc): Likewise.
(XFAIL_IBM128_LIBGCC): Likewise.
(PAYLOAD_DIG): Likewise.
(UNDERFLOW_EXCEPTION_FLOAT): Likewise.
(UNDERFLOW_EXCEPTION_OK_FLOAT): Likewise.
(UNDERFLOW_EXCEPTION_DOUBLE): Likewise.
(UNDERFLOW_EXCEPTION_OK_DOUBLE): Likewise.
(UNDERFLOW_EXCEPTION_LDOUBLE_IBM): Likewise.
(UNDERFLOW_EXCEPTION_BEFORE_ROUNDING): Likewise.
(TEST_COND_long32): Likewise.
(TEST_COND_long64): Likewise.
(TEST_COND_before_rounding): Likewise.
(TEST_COND_after_rounding): Likewise.
(ulps_file_name): Likewise.
(ulps_file): Likewise.
(output_ulps): Likewise.
(output_dir): Likewise.
(noErrors): Likewise.
(noTests): Likewise.
(noExcTests): Likewise.
(noErrnoTests): Likewise.
(verbose): Likewise.
(output_max_error): Likewise.
(output_points): Likewise.
(ignore_max_ulp): Likewise.
(max_error): Likewise.
(real_max_error): Likewise.
(imag_max_error): Likewise.
(prev_max_error): Likewise.
(prev_real_max_error): Likewise.
(prev_imag_max_error): Likewise.
(max_valid_error): Likewise.
(TYPE_DECIMAL_DIG): Likewise.
(TYPE_HEX_DIG): Likewise.
(fmt_ftostr): Likewise.
(compare_ulp_data): Likewise.
(find_ulps): Likewise.
(init_max_error): Likewise.
(set_max_error): Likewise.
(print_float): Likewise.
(print_screen): Likewise.
(print_screen_max_error): Likewise.
(update_stats): Likewise.
(print_function_ulps): Likewise.
(print_complex_function_ulps): Likewise.
(fpstack_test): Likewise.
(print_max_error): Likewise.
(print_complex_max_error): Likewise.
(test_single_exception): Likewise.
(test_exceptions): Likewise.
(test_single_errno): Likewise.
(test_errno): Likewise.
(ULPDIFF): Likewise.
(ulp): Likewise.
(check_float_internal): Likewise.
(check_float): Likewise.
(check_complex): Likewise.
(check_int): Likewise.
(check_long): Likewise.
(check_bool): Likewise.
(check_longlong): Likewise.
(check_intmax_t): Likewise.
(check_uintmax_t): Likewise.
(enable_test): Likewise.
(matherr): Likewise.
(initialize): Likewise.
(options): Likewise.
(doc): Remove static.
(argp): Likewise.
(parse_opt): Remove.
(check_ulp): Likewise.
(libm_test_init): Likewise.
(libm_test_finish): Likewise.
* math/Makefile (libm-test-support): New variable.
(test-extras): Add libm-test-support files.
(extra-test-objs): Likewise.
(CFLAGS-libm-test-support-float.c): New variable.
(CFLAGS-libm-test-support-double.c): Likewise.
(CFLAGS-libm-test-support-ldouble.c): Likewise.
($(addprefix $(objpfx),$(libm-tests)): Depend on appropriate
libm-test-support objects.
2017-02-08 21:11:49 +00:00
|
|
|
if (fpclassify (ulps) != FP_NORMAL)
|
|
|
|
{
|
|
|
|
fprintf (stderr, "ulp (1.0L) is not FP_NORMAL\n");
|
|
|
|
exit (EXIT_FAILURE);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Compute the next subnormal value using nextafter to validate ulp.
|
|
|
|
We allow +/- 1 ulp around the represented value. */
|
|
|
|
value = FUNC(nextafter) (0, 1);
|
|
|
|
ulps = ULPDIFF (value, 0);
|
2017-02-25 00:14:09 +00:00
|
|
|
ulpx = ulp (LIT(1.0));
|
|
|
|
if (ulps < (LIT(1.0) - ulpx) || ulps > (LIT(1.0) + ulpx))
|
Build most libm-test support code once per type.
libm-test-driver.c contains various functions used in the course of
libm testing, which are built as part of each test using this
machinery.
Currently, these functions get built for three tests for each type
(e.g. test-float, test-ifloat, test-float-finite), plus the vector
function tests. All these tests are huge and thus slow to build; the
output of gen-libm-test.pl totals around 40 MB across all functions.
To make the individual tests built from the Makefile smaller, it makes
sense to split these tests up so the tests for each function are built
separately (thus, three tests for each (function, type) pair, plus
vector tests built only for functions that actually have vector
versions). This improves parallelism and means that if tests fail,
the summary of failed tests makes it more obvious where the problem
might be without needing to look in the .out files to see which
functions' tests failed (though architecture maintainers still need to
keep libm-test-ulps up to date to avoid spurious failures of little
interest).
Simply including libm-test-driver.c as-is in such individual-function
tests does not work because of unused static check_* functions (those
functions only being used for the types of the outputs of the function
under test). It also means the common code gets built over 1000 times
instead of nine (plus vector tests). To avoid that issue, this patch
splits out the bulk of the libm-test-driver.c code into a separate
file libm-test-support.c (with a few functions made non-static). That
separate file is built only once for each floating-point type (so at
present three times, or twice on architectures with long double =
double). Definitions needed in both libm-test-support.c and
libm-test-driver.c go in libm-test-support.h (it's possible some of
those are in fact only needed in one of the two files).
libm-test-driver.c keeps definitions of a limited number of variables
used to configure how libm-test-support.c behaves, various macros and
structures needed by individual-function tests, and the main function.
This move is also consistent in spirit with the move away from
test-skeleton.c having all the test support code, to a small
support/test-driver.c included in individual tests with most of the
code built separately.
Tested for x86_64 and x86.
* math/libm-test-support.c: New file. Content from
math/libm-test-driver.c.
* math/libm-test-support.h: Likewise.
* math/libm-test-support-double.c: New file.
* math/libm-test-support-float.c: Likewise.
* math/libm-test-support-ldouble.c: Likewise.
* math/libm-test-driver.c: Remove main comment and header
includes. Include libm-test-support.h.
[!_GNU_SOURCE] (_GNU_SOURCE): Do not define.
(flag_test_errno): Remove static.
(flag_test_exceptions): Likewise.
(flag_test_finite): Likewise.
(flag_test_inline): Likewise.
(flag_test_mathvec): Likewise.
(test_msg): Likewise.
(NO_EXCEPTION): Remove.
(INVALID_EXCEPTION): Likewise.
(DIVIDE_BY_ZERO_EXCEPTION): Likewise.
(OVERFLOW_EXCEPTION): Likewise.
(UNDERFLOW_EXCEPTION): Likewise.
(INEXACT_EXCEPTION): Likewise.
(INVALID_EXCEPTION_OK): Likewise.
(DIVIDE_BY_ZERO_EXCEPTION_OK): Likewise.
(OVERFLOW_EXCEPTION_OK): Likewise.
(UNDERFLOW_EXCEPTION_OK): Likewise.
(NO_INEXACT_EXCEPTION): Likewise.
(EXCEPTIONS_OK): Likewise.
(IGNORE_ZERO_INF_SIGN): Likewise.
(TEST_NAN_SIGN): Likewise.
(TEST_NAN_PAYLOAD): Likewise.
(NO_TEST_INLINE): Likewise.
(XFAIL_TEST): Likewise.
(ERRNO_UNCHANGED): Likewise.
(ERRNO_EDOM): Likewise.
(ERRNO_ERANGE): Likewise.
(IGNORE_RESULT): Likewise.
(NON_FINITE): Likewise.
(TEST_SNAN): Likewise.
(NO_TEST_MATHVEC): Likewise.
(__CONCATX): Likewise.
(TYPE_MIN): Likewise.
(TYPE_TRUE_MIN): Likewise.
(TYPE_MAX): Likewise.
(MIN_EXP): Likewise.
(MAX_EXP): Likewise.
(MANT_DIG): Likewise.
(FSTR_MAX): Likewise.
(ulp_idx): Likewise.
(qtype_str): Remove static.
(TEST_COND_binary32): Remove.
(TEST_COND_binary64): Likewise.
(TEST_COND_binary128): Likewise.
(TEST_COND_ibm128): Likewise.
(TEST_COND_intel96): Likewise.
(TEST_COND_m68k96): Likewise.
(TEST_COND_ibm128_libgcc): Likewise.
(XFAIL_IBM128_LIBGCC): Likewise.
(PAYLOAD_DIG): Likewise.
(UNDERFLOW_EXCEPTION_FLOAT): Likewise.
(UNDERFLOW_EXCEPTION_OK_FLOAT): Likewise.
(UNDERFLOW_EXCEPTION_DOUBLE): Likewise.
(UNDERFLOW_EXCEPTION_OK_DOUBLE): Likewise.
(UNDERFLOW_EXCEPTION_LDOUBLE_IBM): Likewise.
(UNDERFLOW_EXCEPTION_BEFORE_ROUNDING): Likewise.
(TEST_COND_long32): Likewise.
(TEST_COND_long64): Likewise.
(TEST_COND_before_rounding): Likewise.
(TEST_COND_after_rounding): Likewise.
(ulps_file_name): Likewise.
(ulps_file): Likewise.
(output_ulps): Likewise.
(output_dir): Likewise.
(noErrors): Likewise.
(noTests): Likewise.
(noExcTests): Likewise.
(noErrnoTests): Likewise.
(verbose): Likewise.
(output_max_error): Likewise.
(output_points): Likewise.
(ignore_max_ulp): Likewise.
(max_error): Likewise.
(real_max_error): Likewise.
(imag_max_error): Likewise.
(prev_max_error): Likewise.
(prev_real_max_error): Likewise.
(prev_imag_max_error): Likewise.
(max_valid_error): Likewise.
(TYPE_DECIMAL_DIG): Likewise.
(TYPE_HEX_DIG): Likewise.
(fmt_ftostr): Likewise.
(compare_ulp_data): Likewise.
(find_ulps): Likewise.
(init_max_error): Likewise.
(set_max_error): Likewise.
(print_float): Likewise.
(print_screen): Likewise.
(print_screen_max_error): Likewise.
(update_stats): Likewise.
(print_function_ulps): Likewise.
(print_complex_function_ulps): Likewise.
(fpstack_test): Likewise.
(print_max_error): Likewise.
(print_complex_max_error): Likewise.
(test_single_exception): Likewise.
(test_exceptions): Likewise.
(test_single_errno): Likewise.
(test_errno): Likewise.
(ULPDIFF): Likewise.
(ulp): Likewise.
(check_float_internal): Likewise.
(check_float): Likewise.
(check_complex): Likewise.
(check_int): Likewise.
(check_long): Likewise.
(check_bool): Likewise.
(check_longlong): Likewise.
(check_intmax_t): Likewise.
(check_uintmax_t): Likewise.
(enable_test): Likewise.
(matherr): Likewise.
(initialize): Likewise.
(options): Likewise.
(doc): Remove static.
(argp): Likewise.
(parse_opt): Remove.
(check_ulp): Likewise.
(libm_test_init): Likewise.
(libm_test_finish): Likewise.
* math/Makefile (libm-test-support): New variable.
(test-extras): Add libm-test-support files.
(extra-test-objs): Likewise.
(CFLAGS-libm-test-support-float.c): New variable.
(CFLAGS-libm-test-support-double.c): Likewise.
(CFLAGS-libm-test-support-ldouble.c): Likewise.
($(addprefix $(objpfx),$(libm-tests)): Depend on appropriate
libm-test-support objects.
2017-02-08 21:11:49 +00:00
|
|
|
{
|
|
|
|
fprintf (stderr, "Value outside of 1 +/- 1ulp.\n");
|
|
|
|
exit (EXIT_FAILURE);
|
|
|
|
}
|
|
|
|
/* Compute the nearest representable number from 10 towards 20.
|
|
|
|
The result is 10 + 1ulp. We use this to check the ulp function.
|
|
|
|
We allow +/- 1 ulp around the represented value. */
|
|
|
|
value = FUNC(nextafter) (10, 20);
|
|
|
|
ulps = ULPDIFF (value, 10);
|
2017-02-25 00:14:09 +00:00
|
|
|
ulpx = ulp (LIT(1.0));
|
|
|
|
if (ulps < (LIT(1.0) - ulpx) || ulps > (LIT(1.0) + ulpx))
|
Build most libm-test support code once per type.
libm-test-driver.c contains various functions used in the course of
libm testing, which are built as part of each test using this
machinery.
Currently, these functions get built for three tests for each type
(e.g. test-float, test-ifloat, test-float-finite), plus the vector
function tests. All these tests are huge and thus slow to build; the
output of gen-libm-test.pl totals around 40 MB across all functions.
To make the individual tests built from the Makefile smaller, it makes
sense to split these tests up so the tests for each function are built
separately (thus, three tests for each (function, type) pair, plus
vector tests built only for functions that actually have vector
versions). This improves parallelism and means that if tests fail,
the summary of failed tests makes it more obvious where the problem
might be without needing to look in the .out files to see which
functions' tests failed (though architecture maintainers still need to
keep libm-test-ulps up to date to avoid spurious failures of little
interest).
Simply including libm-test-driver.c as-is in such individual-function
tests does not work because of unused static check_* functions (those
functions only being used for the types of the outputs of the function
under test). It also means the common code gets built over 1000 times
instead of nine (plus vector tests). To avoid that issue, this patch
splits out the bulk of the libm-test-driver.c code into a separate
file libm-test-support.c (with a few functions made non-static). That
separate file is built only once for each floating-point type (so at
present three times, or twice on architectures with long double =
double). Definitions needed in both libm-test-support.c and
libm-test-driver.c go in libm-test-support.h (it's possible some of
those are in fact only needed in one of the two files).
libm-test-driver.c keeps definitions of a limited number of variables
used to configure how libm-test-support.c behaves, various macros and
structures needed by individual-function tests, and the main function.
This move is also consistent in spirit with the move away from
test-skeleton.c having all the test support code, to a small
support/test-driver.c included in individual tests with most of the
code built separately.
Tested for x86_64 and x86.
* math/libm-test-support.c: New file. Content from
math/libm-test-driver.c.
* math/libm-test-support.h: Likewise.
* math/libm-test-support-double.c: New file.
* math/libm-test-support-float.c: Likewise.
* math/libm-test-support-ldouble.c: Likewise.
* math/libm-test-driver.c: Remove main comment and header
includes. Include libm-test-support.h.
[!_GNU_SOURCE] (_GNU_SOURCE): Do not define.
(flag_test_errno): Remove static.
(flag_test_exceptions): Likewise.
(flag_test_finite): Likewise.
(flag_test_inline): Likewise.
(flag_test_mathvec): Likewise.
(test_msg): Likewise.
(NO_EXCEPTION): Remove.
(INVALID_EXCEPTION): Likewise.
(DIVIDE_BY_ZERO_EXCEPTION): Likewise.
(OVERFLOW_EXCEPTION): Likewise.
(UNDERFLOW_EXCEPTION): Likewise.
(INEXACT_EXCEPTION): Likewise.
(INVALID_EXCEPTION_OK): Likewise.
(DIVIDE_BY_ZERO_EXCEPTION_OK): Likewise.
(OVERFLOW_EXCEPTION_OK): Likewise.
(UNDERFLOW_EXCEPTION_OK): Likewise.
(NO_INEXACT_EXCEPTION): Likewise.
(EXCEPTIONS_OK): Likewise.
(IGNORE_ZERO_INF_SIGN): Likewise.
(TEST_NAN_SIGN): Likewise.
(TEST_NAN_PAYLOAD): Likewise.
(NO_TEST_INLINE): Likewise.
(XFAIL_TEST): Likewise.
(ERRNO_UNCHANGED): Likewise.
(ERRNO_EDOM): Likewise.
(ERRNO_ERANGE): Likewise.
(IGNORE_RESULT): Likewise.
(NON_FINITE): Likewise.
(TEST_SNAN): Likewise.
(NO_TEST_MATHVEC): Likewise.
(__CONCATX): Likewise.
(TYPE_MIN): Likewise.
(TYPE_TRUE_MIN): Likewise.
(TYPE_MAX): Likewise.
(MIN_EXP): Likewise.
(MAX_EXP): Likewise.
(MANT_DIG): Likewise.
(FSTR_MAX): Likewise.
(ulp_idx): Likewise.
(qtype_str): Remove static.
(TEST_COND_binary32): Remove.
(TEST_COND_binary64): Likewise.
(TEST_COND_binary128): Likewise.
(TEST_COND_ibm128): Likewise.
(TEST_COND_intel96): Likewise.
(TEST_COND_m68k96): Likewise.
(TEST_COND_ibm128_libgcc): Likewise.
(XFAIL_IBM128_LIBGCC): Likewise.
(PAYLOAD_DIG): Likewise.
(UNDERFLOW_EXCEPTION_FLOAT): Likewise.
(UNDERFLOW_EXCEPTION_OK_FLOAT): Likewise.
(UNDERFLOW_EXCEPTION_DOUBLE): Likewise.
(UNDERFLOW_EXCEPTION_OK_DOUBLE): Likewise.
(UNDERFLOW_EXCEPTION_LDOUBLE_IBM): Likewise.
(UNDERFLOW_EXCEPTION_BEFORE_ROUNDING): Likewise.
(TEST_COND_long32): Likewise.
(TEST_COND_long64): Likewise.
(TEST_COND_before_rounding): Likewise.
(TEST_COND_after_rounding): Likewise.
(ulps_file_name): Likewise.
(ulps_file): Likewise.
(output_ulps): Likewise.
(output_dir): Likewise.
(noErrors): Likewise.
(noTests): Likewise.
(noExcTests): Likewise.
(noErrnoTests): Likewise.
(verbose): Likewise.
(output_max_error): Likewise.
(output_points): Likewise.
(ignore_max_ulp): Likewise.
(max_error): Likewise.
(real_max_error): Likewise.
(imag_max_error): Likewise.
(prev_max_error): Likewise.
(prev_real_max_error): Likewise.
(prev_imag_max_error): Likewise.
(max_valid_error): Likewise.
(TYPE_DECIMAL_DIG): Likewise.
(TYPE_HEX_DIG): Likewise.
(fmt_ftostr): Likewise.
(compare_ulp_data): Likewise.
(find_ulps): Likewise.
(init_max_error): Likewise.
(set_max_error): Likewise.
(print_float): Likewise.
(print_screen): Likewise.
(print_screen_max_error): Likewise.
(update_stats): Likewise.
(print_function_ulps): Likewise.
(print_complex_function_ulps): Likewise.
(fpstack_test): Likewise.
(print_max_error): Likewise.
(print_complex_max_error): Likewise.
(test_single_exception): Likewise.
(test_exceptions): Likewise.
(test_single_errno): Likewise.
(test_errno): Likewise.
(ULPDIFF): Likewise.
(ulp): Likewise.
(check_float_internal): Likewise.
(check_float): Likewise.
(check_complex): Likewise.
(check_int): Likewise.
(check_long): Likewise.
(check_bool): Likewise.
(check_longlong): Likewise.
(check_intmax_t): Likewise.
(check_uintmax_t): Likewise.
(enable_test): Likewise.
(matherr): Likewise.
(initialize): Likewise.
(options): Likewise.
(doc): Remove static.
(argp): Likewise.
(parse_opt): Remove.
(check_ulp): Likewise.
(libm_test_init): Likewise.
(libm_test_finish): Likewise.
* math/Makefile (libm-test-support): New variable.
(test-extras): Add libm-test-support files.
(extra-test-objs): Likewise.
(CFLAGS-libm-test-support-float.c): New variable.
(CFLAGS-libm-test-support-double.c): Likewise.
(CFLAGS-libm-test-support-ldouble.c): Likewise.
($(addprefix $(objpfx),$(libm-tests)): Depend on appropriate
libm-test-support objects.
2017-02-08 21:11:49 +00:00
|
|
|
{
|
|
|
|
fprintf (stderr, "Value outside of 1 +/- 1ulp.\n");
|
|
|
|
exit (EXIT_FAILURE);
|
|
|
|
}
|
|
|
|
/* This gives one more ulp. */
|
|
|
|
value = FUNC(nextafter) (value, 20);
|
|
|
|
ulps = ULPDIFF (value, 10);
|
2017-02-25 00:14:09 +00:00
|
|
|
ulpx = ulp (LIT(2.0));
|
|
|
|
if (ulps < (LIT(2.0) - ulpx) || ulps > (LIT(2.0) + ulpx))
|
Build most libm-test support code once per type.
libm-test-driver.c contains various functions used in the course of
libm testing, which are built as part of each test using this
machinery.
Currently, these functions get built for three tests for each type
(e.g. test-float, test-ifloat, test-float-finite), plus the vector
function tests. All these tests are huge and thus slow to build; the
output of gen-libm-test.pl totals around 40 MB across all functions.
To make the individual tests built from the Makefile smaller, it makes
sense to split these tests up so the tests for each function are built
separately (thus, three tests for each (function, type) pair, plus
vector tests built only for functions that actually have vector
versions). This improves parallelism and means that if tests fail,
the summary of failed tests makes it more obvious where the problem
might be without needing to look in the .out files to see which
functions' tests failed (though architecture maintainers still need to
keep libm-test-ulps up to date to avoid spurious failures of little
interest).
Simply including libm-test-driver.c as-is in such individual-function
tests does not work because of unused static check_* functions (those
functions only being used for the types of the outputs of the function
under test). It also means the common code gets built over 1000 times
instead of nine (plus vector tests). To avoid that issue, this patch
splits out the bulk of the libm-test-driver.c code into a separate
file libm-test-support.c (with a few functions made non-static). That
separate file is built only once for each floating-point type (so at
present three times, or twice on architectures with long double =
double). Definitions needed in both libm-test-support.c and
libm-test-driver.c go in libm-test-support.h (it's possible some of
those are in fact only needed in one of the two files).
libm-test-driver.c keeps definitions of a limited number of variables
used to configure how libm-test-support.c behaves, various macros and
structures needed by individual-function tests, and the main function.
This move is also consistent in spirit with the move away from
test-skeleton.c having all the test support code, to a small
support/test-driver.c included in individual tests with most of the
code built separately.
Tested for x86_64 and x86.
* math/libm-test-support.c: New file. Content from
math/libm-test-driver.c.
* math/libm-test-support.h: Likewise.
* math/libm-test-support-double.c: New file.
* math/libm-test-support-float.c: Likewise.
* math/libm-test-support-ldouble.c: Likewise.
* math/libm-test-driver.c: Remove main comment and header
includes. Include libm-test-support.h.
[!_GNU_SOURCE] (_GNU_SOURCE): Do not define.
(flag_test_errno): Remove static.
(flag_test_exceptions): Likewise.
(flag_test_finite): Likewise.
(flag_test_inline): Likewise.
(flag_test_mathvec): Likewise.
(test_msg): Likewise.
(NO_EXCEPTION): Remove.
(INVALID_EXCEPTION): Likewise.
(DIVIDE_BY_ZERO_EXCEPTION): Likewise.
(OVERFLOW_EXCEPTION): Likewise.
(UNDERFLOW_EXCEPTION): Likewise.
(INEXACT_EXCEPTION): Likewise.
(INVALID_EXCEPTION_OK): Likewise.
(DIVIDE_BY_ZERO_EXCEPTION_OK): Likewise.
(OVERFLOW_EXCEPTION_OK): Likewise.
(UNDERFLOW_EXCEPTION_OK): Likewise.
(NO_INEXACT_EXCEPTION): Likewise.
(EXCEPTIONS_OK): Likewise.
(IGNORE_ZERO_INF_SIGN): Likewise.
(TEST_NAN_SIGN): Likewise.
(TEST_NAN_PAYLOAD): Likewise.
(NO_TEST_INLINE): Likewise.
(XFAIL_TEST): Likewise.
(ERRNO_UNCHANGED): Likewise.
(ERRNO_EDOM): Likewise.
(ERRNO_ERANGE): Likewise.
(IGNORE_RESULT): Likewise.
(NON_FINITE): Likewise.
(TEST_SNAN): Likewise.
(NO_TEST_MATHVEC): Likewise.
(__CONCATX): Likewise.
(TYPE_MIN): Likewise.
(TYPE_TRUE_MIN): Likewise.
(TYPE_MAX): Likewise.
(MIN_EXP): Likewise.
(MAX_EXP): Likewise.
(MANT_DIG): Likewise.
(FSTR_MAX): Likewise.
(ulp_idx): Likewise.
(qtype_str): Remove static.
(TEST_COND_binary32): Remove.
(TEST_COND_binary64): Likewise.
(TEST_COND_binary128): Likewise.
(TEST_COND_ibm128): Likewise.
(TEST_COND_intel96): Likewise.
(TEST_COND_m68k96): Likewise.
(TEST_COND_ibm128_libgcc): Likewise.
(XFAIL_IBM128_LIBGCC): Likewise.
(PAYLOAD_DIG): Likewise.
(UNDERFLOW_EXCEPTION_FLOAT): Likewise.
(UNDERFLOW_EXCEPTION_OK_FLOAT): Likewise.
(UNDERFLOW_EXCEPTION_DOUBLE): Likewise.
(UNDERFLOW_EXCEPTION_OK_DOUBLE): Likewise.
(UNDERFLOW_EXCEPTION_LDOUBLE_IBM): Likewise.
(UNDERFLOW_EXCEPTION_BEFORE_ROUNDING): Likewise.
(TEST_COND_long32): Likewise.
(TEST_COND_long64): Likewise.
(TEST_COND_before_rounding): Likewise.
(TEST_COND_after_rounding): Likewise.
(ulps_file_name): Likewise.
(ulps_file): Likewise.
(output_ulps): Likewise.
(output_dir): Likewise.
(noErrors): Likewise.
(noTests): Likewise.
(noExcTests): Likewise.
(noErrnoTests): Likewise.
(verbose): Likewise.
(output_max_error): Likewise.
(output_points): Likewise.
(ignore_max_ulp): Likewise.
(max_error): Likewise.
(real_max_error): Likewise.
(imag_max_error): Likewise.
(prev_max_error): Likewise.
(prev_real_max_error): Likewise.
(prev_imag_max_error): Likewise.
(max_valid_error): Likewise.
(TYPE_DECIMAL_DIG): Likewise.
(TYPE_HEX_DIG): Likewise.
(fmt_ftostr): Likewise.
(compare_ulp_data): Likewise.
(find_ulps): Likewise.
(init_max_error): Likewise.
(set_max_error): Likewise.
(print_float): Likewise.
(print_screen): Likewise.
(print_screen_max_error): Likewise.
(update_stats): Likewise.
(print_function_ulps): Likewise.
(print_complex_function_ulps): Likewise.
(fpstack_test): Likewise.
(print_max_error): Likewise.
(print_complex_max_error): Likewise.
(test_single_exception): Likewise.
(test_exceptions): Likewise.
(test_single_errno): Likewise.
(test_errno): Likewise.
(ULPDIFF): Likewise.
(ulp): Likewise.
(check_float_internal): Likewise.
(check_float): Likewise.
(check_complex): Likewise.
(check_int): Likewise.
(check_long): Likewise.
(check_bool): Likewise.
(check_longlong): Likewise.
(check_intmax_t): Likewise.
(check_uintmax_t): Likewise.
(enable_test): Likewise.
(matherr): Likewise.
(initialize): Likewise.
(options): Likewise.
(doc): Remove static.
(argp): Likewise.
(parse_opt): Remove.
(check_ulp): Likewise.
(libm_test_init): Likewise.
(libm_test_finish): Likewise.
* math/Makefile (libm-test-support): New variable.
(test-extras): Add libm-test-support files.
(extra-test-objs): Likewise.
(CFLAGS-libm-test-support-float.c): New variable.
(CFLAGS-libm-test-support-double.c): Likewise.
(CFLAGS-libm-test-support-ldouble.c): Likewise.
($(addprefix $(objpfx),$(libm-tests)): Depend on appropriate
libm-test-support objects.
2017-02-08 21:11:49 +00:00
|
|
|
{
|
|
|
|
fprintf (stderr, "Value outside of 2 +/- 1ulp.\n");
|
|
|
|
exit (EXIT_FAILURE);
|
|
|
|
}
|
|
|
|
/* And now calculate 100 ulp. */
|
|
|
|
for (i = 2; i < 100; i++)
|
|
|
|
value = FUNC(nextafter) (value, 20);
|
|
|
|
ulps = ULPDIFF (value, 10);
|
2017-02-25 00:14:09 +00:00
|
|
|
ulpx = ulp (LIT(100.0));
|
|
|
|
if (ulps < (LIT(100.0) - ulpx) || ulps > (LIT(100.0) + ulpx))
|
Build most libm-test support code once per type.
libm-test-driver.c contains various functions used in the course of
libm testing, which are built as part of each test using this
machinery.
Currently, these functions get built for three tests for each type
(e.g. test-float, test-ifloat, test-float-finite), plus the vector
function tests. All these tests are huge and thus slow to build; the
output of gen-libm-test.pl totals around 40 MB across all functions.
To make the individual tests built from the Makefile smaller, it makes
sense to split these tests up so the tests for each function are built
separately (thus, three tests for each (function, type) pair, plus
vector tests built only for functions that actually have vector
versions). This improves parallelism and means that if tests fail,
the summary of failed tests makes it more obvious where the problem
might be without needing to look in the .out files to see which
functions' tests failed (though architecture maintainers still need to
keep libm-test-ulps up to date to avoid spurious failures of little
interest).
Simply including libm-test-driver.c as-is in such individual-function
tests does not work because of unused static check_* functions (those
functions only being used for the types of the outputs of the function
under test). It also means the common code gets built over 1000 times
instead of nine (plus vector tests). To avoid that issue, this patch
splits out the bulk of the libm-test-driver.c code into a separate
file libm-test-support.c (with a few functions made non-static). That
separate file is built only once for each floating-point type (so at
present three times, or twice on architectures with long double =
double). Definitions needed in both libm-test-support.c and
libm-test-driver.c go in libm-test-support.h (it's possible some of
those are in fact only needed in one of the two files).
libm-test-driver.c keeps definitions of a limited number of variables
used to configure how libm-test-support.c behaves, various macros and
structures needed by individual-function tests, and the main function.
This move is also consistent in spirit with the move away from
test-skeleton.c having all the test support code, to a small
support/test-driver.c included in individual tests with most of the
code built separately.
Tested for x86_64 and x86.
* math/libm-test-support.c: New file. Content from
math/libm-test-driver.c.
* math/libm-test-support.h: Likewise.
* math/libm-test-support-double.c: New file.
* math/libm-test-support-float.c: Likewise.
* math/libm-test-support-ldouble.c: Likewise.
* math/libm-test-driver.c: Remove main comment and header
includes. Include libm-test-support.h.
[!_GNU_SOURCE] (_GNU_SOURCE): Do not define.
(flag_test_errno): Remove static.
(flag_test_exceptions): Likewise.
(flag_test_finite): Likewise.
(flag_test_inline): Likewise.
(flag_test_mathvec): Likewise.
(test_msg): Likewise.
(NO_EXCEPTION): Remove.
(INVALID_EXCEPTION): Likewise.
(DIVIDE_BY_ZERO_EXCEPTION): Likewise.
(OVERFLOW_EXCEPTION): Likewise.
(UNDERFLOW_EXCEPTION): Likewise.
(INEXACT_EXCEPTION): Likewise.
(INVALID_EXCEPTION_OK): Likewise.
(DIVIDE_BY_ZERO_EXCEPTION_OK): Likewise.
(OVERFLOW_EXCEPTION_OK): Likewise.
(UNDERFLOW_EXCEPTION_OK): Likewise.
(NO_INEXACT_EXCEPTION): Likewise.
(EXCEPTIONS_OK): Likewise.
(IGNORE_ZERO_INF_SIGN): Likewise.
(TEST_NAN_SIGN): Likewise.
(TEST_NAN_PAYLOAD): Likewise.
(NO_TEST_INLINE): Likewise.
(XFAIL_TEST): Likewise.
(ERRNO_UNCHANGED): Likewise.
(ERRNO_EDOM): Likewise.
(ERRNO_ERANGE): Likewise.
(IGNORE_RESULT): Likewise.
(NON_FINITE): Likewise.
(TEST_SNAN): Likewise.
(NO_TEST_MATHVEC): Likewise.
(__CONCATX): Likewise.
(TYPE_MIN): Likewise.
(TYPE_TRUE_MIN): Likewise.
(TYPE_MAX): Likewise.
(MIN_EXP): Likewise.
(MAX_EXP): Likewise.
(MANT_DIG): Likewise.
(FSTR_MAX): Likewise.
(ulp_idx): Likewise.
(qtype_str): Remove static.
(TEST_COND_binary32): Remove.
(TEST_COND_binary64): Likewise.
(TEST_COND_binary128): Likewise.
(TEST_COND_ibm128): Likewise.
(TEST_COND_intel96): Likewise.
(TEST_COND_m68k96): Likewise.
(TEST_COND_ibm128_libgcc): Likewise.
(XFAIL_IBM128_LIBGCC): Likewise.
(PAYLOAD_DIG): Likewise.
(UNDERFLOW_EXCEPTION_FLOAT): Likewise.
(UNDERFLOW_EXCEPTION_OK_FLOAT): Likewise.
(UNDERFLOW_EXCEPTION_DOUBLE): Likewise.
(UNDERFLOW_EXCEPTION_OK_DOUBLE): Likewise.
(UNDERFLOW_EXCEPTION_LDOUBLE_IBM): Likewise.
(UNDERFLOW_EXCEPTION_BEFORE_ROUNDING): Likewise.
(TEST_COND_long32): Likewise.
(TEST_COND_long64): Likewise.
(TEST_COND_before_rounding): Likewise.
(TEST_COND_after_rounding): Likewise.
(ulps_file_name): Likewise.
(ulps_file): Likewise.
(output_ulps): Likewise.
(output_dir): Likewise.
(noErrors): Likewise.
(noTests): Likewise.
(noExcTests): Likewise.
(noErrnoTests): Likewise.
(verbose): Likewise.
(output_max_error): Likewise.
(output_points): Likewise.
(ignore_max_ulp): Likewise.
(max_error): Likewise.
(real_max_error): Likewise.
(imag_max_error): Likewise.
(prev_max_error): Likewise.
(prev_real_max_error): Likewise.
(prev_imag_max_error): Likewise.
(max_valid_error): Likewise.
(TYPE_DECIMAL_DIG): Likewise.
(TYPE_HEX_DIG): Likewise.
(fmt_ftostr): Likewise.
(compare_ulp_data): Likewise.
(find_ulps): Likewise.
(init_max_error): Likewise.
(set_max_error): Likewise.
(print_float): Likewise.
(print_screen): Likewise.
(print_screen_max_error): Likewise.
(update_stats): Likewise.
(print_function_ulps): Likewise.
(print_complex_function_ulps): Likewise.
(fpstack_test): Likewise.
(print_max_error): Likewise.
(print_complex_max_error): Likewise.
(test_single_exception): Likewise.
(test_exceptions): Likewise.
(test_single_errno): Likewise.
(test_errno): Likewise.
(ULPDIFF): Likewise.
(ulp): Likewise.
(check_float_internal): Likewise.
(check_float): Likewise.
(check_complex): Likewise.
(check_int): Likewise.
(check_long): Likewise.
(check_bool): Likewise.
(check_longlong): Likewise.
(check_intmax_t): Likewise.
(check_uintmax_t): Likewise.
(enable_test): Likewise.
(matherr): Likewise.
(initialize): Likewise.
(options): Likewise.
(doc): Remove static.
(argp): Likewise.
(parse_opt): Remove.
(check_ulp): Likewise.
(libm_test_init): Likewise.
(libm_test_finish): Likewise.
* math/Makefile (libm-test-support): New variable.
(test-extras): Add libm-test-support files.
(extra-test-objs): Likewise.
(CFLAGS-libm-test-support-float.c): New variable.
(CFLAGS-libm-test-support-double.c): Likewise.
(CFLAGS-libm-test-support-ldouble.c): Likewise.
($(addprefix $(objpfx),$(libm-tests)): Depend on appropriate
libm-test-support objects.
2017-02-08 21:11:49 +00:00
|
|
|
{
|
|
|
|
fprintf (stderr, "Value outside of 100 +/- 1ulp.\n");
|
|
|
|
exit (EXIT_FAILURE);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Do all initialization for a test run with arguments given by ARGC
|
|
|
|
and ARGV. */
|
|
|
|
void
|
|
|
|
libm_test_init (int argc, char **argv)
|
|
|
|
{
|
|
|
|
int remaining;
|
|
|
|
char *ulps_file_path;
|
|
|
|
size_t dir_len = 0;
|
|
|
|
|
|
|
|
verbose = 1;
|
|
|
|
output_ulps = 0;
|
|
|
|
output_max_error = 1;
|
|
|
|
output_points = 1;
|
|
|
|
output_dir = NULL;
|
|
|
|
/* XXX set to 0 for releases. */
|
|
|
|
ignore_max_ulp = 0;
|
|
|
|
|
|
|
|
/* Parse and process arguments. */
|
|
|
|
argp_parse (&argp, argc, argv, 0, &remaining, NULL);
|
|
|
|
|
|
|
|
if (remaining != argc)
|
|
|
|
{
|
|
|
|
fprintf (stderr, "wrong number of arguments");
|
|
|
|
argp_help (&argp, stdout, ARGP_HELP_SEE, program_invocation_short_name);
|
|
|
|
exit (EXIT_FAILURE);
|
|
|
|
}
|
|
|
|
|
|
|
|
if (output_ulps)
|
|
|
|
{
|
|
|
|
if (output_dir != NULL)
|
|
|
|
dir_len = strlen (output_dir);
|
|
|
|
ulps_file_path = (char *) malloc (dir_len + strlen (ulps_file_name) + 1);
|
|
|
|
if (ulps_file_path == NULL)
|
|
|
|
{
|
|
|
|
perror ("can't allocate path for `ULPs' file: ");
|
|
|
|
exit (1);
|
|
|
|
}
|
|
|
|
sprintf (ulps_file_path, "%s%s", output_dir == NULL ? "" : output_dir, ulps_file_name);
|
|
|
|
ulps_file = fopen (ulps_file_path, "a");
|
|
|
|
if (ulps_file == NULL)
|
|
|
|
{
|
|
|
|
perror ("can't open file `ULPs' for writing: ");
|
|
|
|
exit (1);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
initialize ();
|
|
|
|
fputs (test_msg, stdout);
|
|
|
|
|
|
|
|
check_ulp ();
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Process the test results, returning the exit status. */
|
|
|
|
int
|
|
|
|
libm_test_finish (void)
|
|
|
|
{
|
|
|
|
if (output_ulps)
|
|
|
|
fclose (ulps_file);
|
|
|
|
|
|
|
|
printf ("\nTest suite completed:\n");
|
|
|
|
printf (" %d test cases plus %d tests for exception flags and\n"
|
|
|
|
" %d tests for errno executed.\n",
|
|
|
|
noTests, noExcTests, noErrnoTests);
|
|
|
|
if (noErrors)
|
|
|
|
{
|
|
|
|
printf (" %d errors occurred.\n", noErrors);
|
|
|
|
return 1;
|
|
|
|
}
|
|
|
|
printf (" All tests passed successfully.\n");
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|