From cc25c8b4c1196a8c29e9a45b1e096b99a87b7f8c Mon Sep 17 00:00:00 2001 From: Torvald Riegel Date: Thu, 22 May 2014 16:00:12 +0200 Subject: [PATCH] New pthread rwlock that is more scalable. This replaces the pthread rwlock with a new implementation that uses a more scalable algorithm (primarily through not using a critical section anymore to make state changes). The fast path for rdlock acquisition and release is now basically a single atomic read-modify write or CAS and a few branches. See nptl/pthread_rwlock_common.c for details. * nptl/DESIGN-rwlock.txt: Remove. * nptl/lowlevelrwlock.sym: Remove. * nptl/Makefile: Add new tests. * nptl/pthread_rwlock_common.c: New file. Contains the new rwlock. * nptl/pthreadP.h (PTHREAD_RWLOCK_PREFER_READER_P): Remove. (PTHREAD_RWLOCK_WRPHASE, PTHREAD_RWLOCK_WRLOCKED, PTHREAD_RWLOCK_RWAITING, PTHREAD_RWLOCK_READER_SHIFT, PTHREAD_RWLOCK_READER_OVERFLOW, PTHREAD_RWLOCK_WRHANDOVER, PTHREAD_RWLOCK_FUTEX_USED): New. * nptl/pthread_rwlock_init.c (__pthread_rwlock_init): Adapt to new implementation. * nptl/pthread_rwlock_rdlock.c (__pthread_rwlock_rdlock_slow): Remove. (__pthread_rwlock_rdlock): Adapt. * nptl/pthread_rwlock_timedrdlock.c (pthread_rwlock_timedrdlock): Adapt. * nptl/pthread_rwlock_timedwrlock.c (pthread_rwlock_timedwrlock): Adapt. * nptl/pthread_rwlock_trywrlock.c (pthread_rwlock_trywrlock): Adapt. * nptl/pthread_rwlock_tryrdlock.c (pthread_rwlock_tryrdlock): Adapt. * nptl/pthread_rwlock_unlock.c (pthread_rwlock_unlock): Adapt. * nptl/pthread_rwlock_wrlock.c (__pthread_rwlock_wrlock_slow): Remove. (__pthread_rwlock_wrlock): Adapt. * nptl/tst-rwlock10.c: Adapt. * nptl/tst-rwlock11.c: Adapt. * nptl/tst-rwlock17.c: New file. * nptl/tst-rwlock18.c: New file. * nptl/tst-rwlock19.c: New file. * nptl/tst-rwlock2b.c: New file. * nptl/tst-rwlock8.c: Adapt. * nptl/tst-rwlock9.c: Adapt. * sysdeps/aarch64/nptl/bits/pthreadtypes.h (pthread_rwlock_t): Adapt. * sysdeps/arm/nptl/bits/pthreadtypes.h (pthread_rwlock_t): Adapt. * sysdeps/hppa/nptl/bits/pthreadtypes.h (pthread_rwlock_t): Adapt. * sysdeps/ia64/nptl/bits/pthreadtypes.h (pthread_rwlock_t): Adapt. * sysdeps/m68k/nptl/bits/pthreadtypes.h (pthread_rwlock_t): Adapt. * sysdeps/microblaze/nptl/bits/pthreadtypes.h (pthread_rwlock_t): Adapt. * sysdeps/mips/nptl/bits/pthreadtypes.h (pthread_rwlock_t): Adapt. * sysdeps/nios2/nptl/bits/pthreadtypes.h (pthread_rwlock_t): Adapt. * sysdeps/s390/nptl/bits/pthreadtypes.h (pthread_rwlock_t): Adapt. * sysdeps/sh/nptl/bits/pthreadtypes.h (pthread_rwlock_t): Adapt. * sysdeps/sparc/nptl/bits/pthreadtypes.h (pthread_rwlock_t): Adapt. * sysdeps/tile/nptl/bits/pthreadtypes.h (pthread_rwlock_t): Adapt. * sysdeps/unix/sysv/linux/alpha/bits/pthreadtypes.h (pthread_rwlock_t): Adapt. * sysdeps/unix/sysv/linux/powerpc/bits/pthreadtypes.h (pthread_rwlock_t): Adapt. * sysdeps/x86/bits/pthreadtypes.h (pthread_rwlock_t): Adapt. * nptl/nptl-printers.py (): Adapt. * nptl/nptl_lock_constants.pysym: Adapt. * nptl/test-rwlock-printers.py: Adapt. * nptl/test-rwlockattr-printers.c: Adapt. * nptl/test-rwlockattr-printers.py: Adapt. --- ChangeLog | 55 ++ nptl/DESIGN-rwlock.txt | 113 --- nptl/Makefile | 11 +- nptl/lowlevelrwlock.sym | 16 - nptl/nptl-printers.py | 48 +- nptl/nptl_lock_constants.pysym | 5 + nptl/pthreadP.h | 13 +- nptl/pthread_rwlock_common.c | 924 ++++++++++++++++++ nptl/pthread_rwlock_init.c | 25 +- nptl/pthread_rwlock_rdlock.c | 158 +-- nptl/pthread_rwlock_timedrdlock.c | 125 +-- nptl/pthread_rwlock_timedwrlock.c | 125 +-- nptl/pthread_rwlock_tryrdlock.c | 105 +- nptl/pthread_rwlock_trywrlock.c | 53 +- nptl/pthread_rwlock_unlock.c | 53 +- nptl/pthread_rwlock_wrlock.c | 106 +- nptl/test-rwlock-printers.py | 8 +- nptl/test-rwlockattr-printers.c | 2 + nptl/test-rwlockattr-printers.py | 3 + nptl/tst-rwlock10.c | 2 +- nptl/tst-rwlock11.c | 2 +- nptl/tst-rwlock17.c | 19 + nptl/tst-rwlock18.c | 19 + nptl/tst-rwlock19.c | 127 +++ nptl/tst-rwlock2b.c | 2 + nptl/tst-rwlock8.c | 25 +- nptl/tst-rwlock9.c | 25 +- sysdeps/aarch64/nptl/bits/pthreadtypes.h | 14 +- sysdeps/arm/nptl/bits/pthreadtypes.h | 14 +- sysdeps/hppa/nptl/bits/pthreadtypes.h | 14 +- sysdeps/ia64/nptl/bits/pthreadtypes.h | 14 +- sysdeps/m68k/nptl/bits/pthreadtypes.h | 14 +- sysdeps/microblaze/nptl/bits/pthreadtypes.h | 14 +- sysdeps/mips/nptl/bits/pthreadtypes.h | 28 +- sysdeps/nios2/nptl/bits/pthreadtypes.h | 14 +- sysdeps/s390/nptl/bits/pthreadtypes.h | 28 +- sysdeps/sh/nptl/bits/pthreadtypes.h | 14 +- sysdeps/sparc/nptl/bits/pthreadtypes.h | 28 +- sysdeps/tile/nptl/bits/pthreadtypes.h | 28 +- .../unix/sysv/linux/alpha/bits/pthreadtypes.h | 14 +- .../sysv/linux/powerpc/bits/pthreadtypes.h | 28 +- sysdeps/x86/bits/pthreadtypes.h | 28 +- 42 files changed, 1548 insertions(+), 915 deletions(-) delete mode 100644 nptl/DESIGN-rwlock.txt delete mode 100644 nptl/lowlevelrwlock.sym create mode 100644 nptl/pthread_rwlock_common.c create mode 100644 nptl/tst-rwlock17.c create mode 100644 nptl/tst-rwlock18.c create mode 100644 nptl/tst-rwlock19.c create mode 100644 nptl/tst-rwlock2b.c diff --git a/ChangeLog b/ChangeLog index 69ff16cd14..1e2e478580 100644 --- a/ChangeLog +++ b/ChangeLog @@ -1,3 +1,58 @@ +2016-01-10 Torvald Riegel + + * nptl/DESIGN-rwlock.txt: Remove. + * nptl/lowlevelrwlock.sym: Remove. + * nptl/Makefile: Add new tests. + * nptl/pthread_rwlock_common.c: New file. Contains the new rwlock. + * nptl/pthreadP.h (PTHREAD_RWLOCK_PREFER_READER_P): Remove. + (PTHREAD_RWLOCK_WRPHASE, PTHREAD_RWLOCK_WRLOCKED, + PTHREAD_RWLOCK_RWAITING, PTHREAD_RWLOCK_READER_SHIFT, + PTHREAD_RWLOCK_READER_OVERFLOW, PTHREAD_RWLOCK_WRHANDOVER, + PTHREAD_RWLOCK_FUTEX_USED): New. + * nptl/pthread_rwlock_init.c (__pthread_rwlock_init): Adapt to new + implementation. + * nptl/pthread_rwlock_rdlock.c (__pthread_rwlock_rdlock_slow): Remove. + (__pthread_rwlock_rdlock): Adapt. + * nptl/pthread_rwlock_timedrdlock.c + (pthread_rwlock_timedrdlock): Adapt. + * nptl/pthread_rwlock_timedwrlock.c + (pthread_rwlock_timedwrlock): Adapt. + * nptl/pthread_rwlock_trywrlock.c (pthread_rwlock_trywrlock): Adapt. + * nptl/pthread_rwlock_tryrdlock.c (pthread_rwlock_tryrdlock): Adapt. + * nptl/pthread_rwlock_unlock.c (pthread_rwlock_unlock): Adapt. + * nptl/pthread_rwlock_wrlock.c (__pthread_rwlock_wrlock_slow): Remove. + (__pthread_rwlock_wrlock): Adapt. + * nptl/tst-rwlock10.c: Adapt. + * nptl/tst-rwlock11.c: Adapt. + * nptl/tst-rwlock17.c: New file. + * nptl/tst-rwlock18.c: New file. + * nptl/tst-rwlock19.c: New file. + * nptl/tst-rwlock2b.c: New file. + * nptl/tst-rwlock8.c: Adapt. + * nptl/tst-rwlock9.c: Adapt. + * sysdeps/aarch64/nptl/bits/pthreadtypes.h (pthread_rwlock_t): Adapt. + * sysdeps/arm/nptl/bits/pthreadtypes.h (pthread_rwlock_t): Adapt. + * sysdeps/hppa/nptl/bits/pthreadtypes.h (pthread_rwlock_t): Adapt. + * sysdeps/ia64/nptl/bits/pthreadtypes.h (pthread_rwlock_t): Adapt. + * sysdeps/m68k/nptl/bits/pthreadtypes.h (pthread_rwlock_t): Adapt. + * sysdeps/microblaze/nptl/bits/pthreadtypes.h (pthread_rwlock_t): Adapt. + * sysdeps/mips/nptl/bits/pthreadtypes.h (pthread_rwlock_t): Adapt. + * sysdeps/nios2/nptl/bits/pthreadtypes.h (pthread_rwlock_t): Adapt. + * sysdeps/s390/nptl/bits/pthreadtypes.h (pthread_rwlock_t): Adapt. + * sysdeps/sh/nptl/bits/pthreadtypes.h (pthread_rwlock_t): Adapt. + * sysdeps/sparc/nptl/bits/pthreadtypes.h (pthread_rwlock_t): Adapt. + * sysdeps/tile/nptl/bits/pthreadtypes.h (pthread_rwlock_t): Adapt. + * sysdeps/unix/sysv/linux/alpha/bits/pthreadtypes.h + (pthread_rwlock_t): Adapt. + * sysdeps/unix/sysv/linux/powerpc/bits/pthreadtypes.h + (pthread_rwlock_t): Adapt. + * sysdeps/x86/bits/pthreadtypes.h (pthread_rwlock_t): Adapt. + * nptl/nptl-printers.py (): Adapt. + * nptl/nptl_lock_constants.pysym: Adapt. + * nptl/test-rwlock-printers.py: Adapt. + * nptl/test-rwlockattr-printers.c: Adapt. + * nptl/test-rwlockattr-printers.py: Adapt. + 2017-01-10 Joseph Myers * math/libm-test.inc (XFAIL_IBM128_LIBGCC): New macro. diff --git a/nptl/DESIGN-rwlock.txt b/nptl/DESIGN-rwlock.txt deleted file mode 100644 index 810d1b8f35..0000000000 --- a/nptl/DESIGN-rwlock.txt +++ /dev/null @@ -1,113 +0,0 @@ -Reader Writer Locks pseudocode -============================== - - pthread_rwlock_rdlock(pthread_rwlock_t *rwlock); - pthread_rwlock_unlock(pthread_rwlock_t *rwlock); - pthread_rwlock_wrlock(pthread_rwlock_t *rwlock); - -struct pthread_rwlock_t { - - unsigned int lock: - - internal mutex - - unsigned int writers_preferred; - - locking mode: 0 recursive, readers preferred - 1 nonrecursive, writers preferred - - unsigned int readers; - - number of read-only references various threads have - - pthread_t writer; - - descriptor of the writer or 0 - - unsigned int readers_wakeup; - - 'all readers should wake up' futex. - - unsigned int writer_wakeup; - - 'one writer should wake up' futex. - - unsigned int nr_readers_queued; - - number of readers queued up. - - unsigned int nr_writers_queued; - - number of writers queued up. -} - -pthread_rwlock_rdlock(pthread_rwlock_t *rwlock) -{ - lll_lock(rwlock->lock); - for (;;) { - if (!rwlock->writer && (!rwlock->nr_writers_queued || - !rwlock->writers_preferred)) - break; - - rwlock->nr_readers_queued++; - val = rwlock->readers_wakeup; - lll_unlock(rwlock->lock); - - futex_wait(&rwlock->readers_wakeup, val) - - lll_lock(rwlock->lock); - rwlock->nr_readers_queued--; - } - rwlock->readers++; - lll_unlock(rwlock->lock); -} - -pthread_rwlock_tryrdlock(pthread_rwlock_t *rwlock) -{ - int result = EBUSY; - lll_lock(rwlock->lock); - if (!rwlock->writer && (!rwlock->nr_writers_queued || - !rwlock->writers_preferred)) - rwlock->readers++; - lll_unlock(rwlock->lock); - return result; -} - -pthread_rwlock_wrlock(pthread_rwlock_t *rwlock) -{ - lll_lock(rwlock->lock); - for (;;) { - if (!rwlock->writer && !rwlock->readers) - break; - - rwlock->nr_writers_queued++; - val = rwlock->writer_wakeup; - lll_unlock(rwlock->lock); - - futex_wait(&rwlock->writer_wakeup, val); - - lll_lock(rwlock->lock); - rwlock->nr_writers_queued--; - } - rwlock->writer = pthread_self(); - lll_unlock(rwlock->lock); -} - -pthread_rwlock_unlock(pthread_rwlock_t *rwlock) -{ - lll_lock(rwlock->lock); - - if (rwlock->writer) - rwlock->writer = 0; - else - rwlock->readers--; - - if (!rwlock->readers) { - if (rwlock->nr_writers_queued) { - ++rwlock->writer_wakeup; - lll_unlock(rwlock->lock); - futex_wake(&rwlock->writer_wakeup, 1); - return; - } else - if (rwlock->nr_readers_queued) { - ++rwlock->readers_wakeup; - lll_unlock(rwlock->lock); - futex_wake(&rwlock->readers_wakeup, MAX_INT); - return; - } - } - - lll_unlock(rwlock->lock); -} diff --git a/nptl/Makefile b/nptl/Makefile index 36dbdbb54c..9d5738f270 100644 --- a/nptl/Makefile +++ b/nptl/Makefile @@ -237,10 +237,11 @@ tests = tst-typesizes \ tst-robust6 tst-robust7 tst-robust8 tst-robust9 \ tst-robustpi1 tst-robustpi2 tst-robustpi3 tst-robustpi4 tst-robustpi5 \ tst-robustpi6 tst-robustpi7 tst-robustpi8 tst-robustpi9 \ - tst-rwlock1 tst-rwlock2 tst-rwlock2a tst-rwlock3 tst-rwlock4 \ - tst-rwlock5 tst-rwlock6 tst-rwlock7 tst-rwlock8 tst-rwlock9 \ - tst-rwlock10 tst-rwlock11 tst-rwlock12 tst-rwlock13 tst-rwlock14 \ - tst-rwlock15 tst-rwlock16 \ + tst-rwlock1 tst-rwlock2 tst-rwlock2a tst-rwlock2b tst-rwlock3 \ + tst-rwlock4 tst-rwlock5 tst-rwlock6 tst-rwlock7 tst-rwlock8 \ + tst-rwlock9 tst-rwlock10 tst-rwlock11 tst-rwlock12 tst-rwlock13 \ + tst-rwlock14 tst-rwlock15 tst-rwlock16 tst-rwlock17 tst-rwlock18 \ + tst-rwlock19 \ tst-once1 tst-once2 tst-once3 tst-once4 tst-once5 \ tst-key1 tst-key2 tst-key3 tst-key4 \ tst-sem1 tst-sem2 tst-sem3 tst-sem4 tst-sem5 tst-sem6 tst-sem7 \ @@ -306,7 +307,7 @@ test-xfail-tst-once5 = yes # Files which must not be linked with libpthread. tests-nolibpthread = tst-unload -gen-as-const-headers = pthread-errnos.sym lowlevelrwlock.sym \ +gen-as-const-headers = pthread-errnos.sym \ unwindbuf.sym \ lowlevelrobustlock.sym pthread-pi-defines.sym diff --git a/nptl/lowlevelrwlock.sym b/nptl/lowlevelrwlock.sym deleted file mode 100644 index f50b25bfb8..0000000000 --- a/nptl/lowlevelrwlock.sym +++ /dev/null @@ -1,16 +0,0 @@ -#include -#include -#include -#include - --- - -MUTEX offsetof (pthread_rwlock_t, __data.__lock) -NR_READERS offsetof (pthread_rwlock_t, __data.__nr_readers) -READERS_WAKEUP offsetof (pthread_rwlock_t, __data.__readers_wakeup) -WRITERS_WAKEUP offsetof (pthread_rwlock_t, __data.__writer_wakeup) -READERS_QUEUED offsetof (pthread_rwlock_t, __data.__nr_readers_queued) -WRITERS_QUEUED offsetof (pthread_rwlock_t, __data.__nr_writers_queued) -FLAGS offsetof (pthread_rwlock_t, __data.__flags) -WRITER offsetof (pthread_rwlock_t, __data.__writer) -PSHARED offsetof (pthread_rwlock_t, __data.__shared) diff --git a/nptl/nptl-printers.py b/nptl/nptl-printers.py index 77018e7ea7..9d67865577 100644 --- a/nptl/nptl-printers.py +++ b/nptl/nptl-printers.py @@ -430,12 +430,10 @@ class RWLockPrinter(object): """ data = rwlock['__data'] - self.readers = data['__nr_readers'] - self.queued_readers = data['__nr_readers_queued'] - self.queued_writers = data['__nr_writers_queued'] - self.writer_id = data['__writer'] + self.readers = data['__readers'] + self.cur_writer = data['__cur_writer'] self.shared = data['__shared'] - self.prefers_writers = data['__flags'] + self.flags = data['__flags'] self.values = [] self.read_values() @@ -468,20 +466,19 @@ class RWLockPrinter(object): def read_status(self): """Read the status of the rwlock.""" - # Right now pthread_rwlock_destroy doesn't do anything, so there's no - # way to check if an rwlock is destroyed. - - if self.writer_id: - self.values.append(('Status', 'Locked (Write)')) - self.values.append(('Writer ID', self.writer_id)) - elif self.readers: - self.values.append(('Status', 'Locked (Read)')) - self.values.append(('Readers', self.readers)) + if self.readers & PTHREAD_RWLOCK_WRPHASE: + if self.readers & PTHREAD_RWLOCK_WRLOCKED: + self.values.append(('Status', 'Acquired (Write)')) + self.values.append(('Writer ID', self.cur_writer)) + else: + self.values.append(('Status', 'Not acquired')) else: - self.values.append(('Status', 'Unlocked')) - - self.values.append(('Queued readers', self.queued_readers)) - self.values.append(('Queued writers', self.queued_writers)) + r = self.readers >> PTHREAD_RWLOCK_READER_SHIFT + if r > 0: + self.values.append(('Status', 'Acquired (Read)')) + self.values.append(('Readers', r)) + else: + self.values.append(('Status', 'Not acquired')) def read_attributes(self): """Read the attributes of the rwlock.""" @@ -491,10 +488,12 @@ class RWLockPrinter(object): else: self.values.append(('Shared', 'No')) - if self.prefers_writers: + if self.flags == PTHREAD_RWLOCK_PREFER_READER_NP: + self.values.append(('Prefers', 'Readers')) + elif self.flags == PTHREAD_RWLOCK_PREFER_WRITER_NP: self.values.append(('Prefers', 'Writers')) else: - self.values.append(('Prefers', 'Readers')) + self.values.append(('Prefers', 'Writers no recursive readers')) class RWLockAttributesPrinter(object): """Pretty printer for pthread_rwlockattr_t. @@ -555,13 +554,12 @@ class RWLockAttributesPrinter(object): # PTHREAD_PROCESS_PRIVATE self.values.append(('Shared', 'No')) - if (rwlock_type == PTHREAD_RWLOCK_PREFER_READER_NP or - rwlock_type == PTHREAD_RWLOCK_PREFER_WRITER_NP): - # This is a known bug. Using PTHREAD_RWLOCK_PREFER_WRITER_NP will - # still make the rwlock prefer readers. + if rwlock_type == PTHREAD_RWLOCK_PREFER_READER_NP: self.values.append(('Prefers', 'Readers')) - elif rwlock_type == PTHREAD_RWLOCK_PREFER_WRITER_NONRECURSIVE_NP: + elif rwlock_type == PTHREAD_RWLOCK_PREFER_WRITER_NP: self.values.append(('Prefers', 'Writers')) + else: + self.values.append(('Prefers', 'Writers no recursive readers')) def register(objfile): """Register the pretty printers within the given objfile.""" diff --git a/nptl/nptl_lock_constants.pysym b/nptl/nptl_lock_constants.pysym index 2ab3179155..ade4398e0c 100644 --- a/nptl/nptl_lock_constants.pysym +++ b/nptl/nptl_lock_constants.pysym @@ -57,6 +57,11 @@ PTHREAD_RWLOCK_PREFER_READER_NP PTHREAD_RWLOCK_PREFER_WRITER_NP PTHREAD_RWLOCK_PREFER_WRITER_NONRECURSIVE_NP +-- Rwlock +PTHREAD_RWLOCK_WRPHASE +PTHREAD_RWLOCK_WRLOCKED +PTHREAD_RWLOCK_READER_SHIFT + -- 'Shared' attribute values PTHREAD_PROCESS_PRIVATE PTHREAD_PROCESS_SHARED diff --git a/nptl/pthreadP.h b/nptl/pthreadP.h index 2322c59fa7..4f76cbb62a 100644 --- a/nptl/pthreadP.h +++ b/nptl/pthreadP.h @@ -150,9 +150,16 @@ enum | PTHREAD_MUTEXATTR_PROTOCOL_MASK | PTHREAD_MUTEXATTR_PRIO_CEILING_MASK) -/* Check whether rwlock prefers readers. */ -#define PTHREAD_RWLOCK_PREFER_READER_P(rwlock) \ - ((rwlock)->__data.__flags == 0) +/* For the following, see pthread_rwlock_common.c. */ +#define PTHREAD_RWLOCK_WRPHASE 1 +#define PTHREAD_RWLOCK_WRLOCKED 2 +#define PTHREAD_RWLOCK_RWAITING 4 +#define PTHREAD_RWLOCK_READER_SHIFT 3 +#define PTHREAD_RWLOCK_READER_OVERFLOW ((unsigned int) 1 \ + << (sizeof (unsigned int) * 8 - 1)) +#define PTHREAD_RWLOCK_WRHANDOVER ((unsigned int) 1 \ + << (sizeof (unsigned int) * 8 - 1)) +#define PTHREAD_RWLOCK_FUTEX_USED 2 /* Bits used in robust mutex implementation. */ diff --git a/nptl/pthread_rwlock_common.c b/nptl/pthread_rwlock_common.c new file mode 100644 index 0000000000..256508ca2a --- /dev/null +++ b/nptl/pthread_rwlock_common.c @@ -0,0 +1,924 @@ +/* POSIX reader--writer lock: core parts. + Copyright (C) 2016-2017 Free Software Foundation, Inc. + This file is part of the GNU C Library. + + The GNU C Library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + The GNU C Library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with the GNU C Library; if not, see + . */ + +#include +#include +#include +#include +#include +#include +#include +#include + + +/* A reader--writer lock that fulfills the POSIX requirements (but operations + on this lock are not necessarily full barriers, as one may interpret the + POSIX requirement about "synchronizing memory"). All critical sections are + in a total order, writers synchronize with prior writers and readers, and + readers synchronize with prior writers. + + A thread is allowed to acquire a read lock recursively (i.e., have rdlock + critical sections that overlap in sequenced-before) unless the kind of the + rwlock is set to PTHREAD_RWLOCK_PREFER_WRITERS_NONRECURSIVE_NP. + + This lock is built so that workloads of mostly readers can be executed with + low runtime overheads. This matches that the default kind of the lock is + PTHREAD_RWLOCK_PREFER_READER_NP. Acquiring a read lock requires a single + atomic addition if the lock is or was previously acquired by other + readers; releasing the lock is a single CAS if there are no concurrent + writers. + Workloads consisting of mostly writers are of secondary importance. + An uncontended write lock acquisition is as fast as for a normal + exclusive mutex but writer contention is somewhat more costly due to + keeping track of the exact number of writers. If the rwlock kind requests + writers to be preferred (i.e., PTHREAD_RWLOCK_PREFER_WRITERS_NP or the + no-recursive-readers variant of it), then writer--to--writer lock ownership + hand-over is fairly fast and bypasses lock acquisition attempts by readers. + The costs of lock ownership transfer between readers and writers vary. If + the program asserts that there are no recursive readers and writers are + preferred, then write lock acquisition attempts will block subsequent read + lock acquisition attempts, so that new incoming readers do not prolong a + phase in which readers have acquired the lock. + + + The main components of the rwlock are a writer-only lock that allows only + one of the concurrent writers to be the primary writer, and a + single-writer-multiple-readers lock that decides between read phases, in + which readers have acquired the rwlock, and write phases in which a primary + writer or a sequence of different primary writers have acquired the rwlock. + + The single-writer-multiple-readers lock is the central piece of state + describing the rwlock and is encoded in the __readers field (see below for + a detailed explanation): + + State WP WL R RW Notes + --------------------------- + #1 0 0 0 0 Lock is idle (and in a read phase). + #2 0 0 >0 0 Readers have acquired the lock. + #3 0 1 0 0 Lock is not acquired; a writer is waiting for a write + phase to start or will try to start one. + #4 0 1 >0 0 Readers have acquired the lock; a writer is waiting + and explicit hand-over to the writer is required. + #4a 0 1 >0 1 Same as #4 except that there are further readers + waiting because the writer is to be preferred. + #5 1 0 0 0 Lock is idle (and in a write phase). + #6 1 0 >0 0 Write phase; readers are waiting for a read phase to + start or will try to start one. + #7 1 1 0 0 Lock is acquired by a writer. + #8 1 1 >0 0 Lock acquired by a writer and readers are waiting; + explicit hand-over to the readers is required. + + WP (PTHREAD_RWLOCK_WRPHASE) is true if the lock is in a write phase, so + potentially acquired by a primary writer. + WL (PTHREAD_RWLOCK_WRLOCKED) is true if there is a primary writer (i.e., + the thread that was able to set this bit from false to true). + R (all bits in __readers except the number of least-significant bits + denoted in PTHREAD_RWLOCK_READER_SHIFT) is the number of readers that have + or are trying to acquired the lock. There may be more readers waiting if + writers are preferred and there will be no recursive readers, in which + case RW (PTHREAD_RWLOCK_RWAITING) is true in state #4a. + + We want to block using futexes but using __readers as a futex word directly + is not a good solution. First, we want to wait on different conditions + such as waiting for a phase change vs. waiting for the primary writer to + release the writer-only lock. Second, the number of readers could change + frequently, which would make it likely that a writer's futex_wait fails + frequently too because the expected value does not match the value of + __readers anymore. + Therefore, we split out the futex words into the __wrphase_futex and + __writers_futex fields. The former tracks the value of the WP bit and is + changed after changing WP by the thread that changes WP. However, because + of the POSIX requirements regarding mutex/rwlock destruction (i.e., that + destroying a rwlock is allowed as soon as no thread has acquired or will + acquire the lock), we have to be careful and hand over lock ownership (via + a phase change) carefully to those threads waiting. Specifically, we must + prevent a situation in which we are not quite sure whether we still have + to unblock another thread through a change to memory (executing a + futex_wake on a former futex word that is now used for something else is + fine). + The scheme we use for __wrphase_futex is that waiting threads that may + use the futex word to block now all have to use the futex word to block; it + is not allowed to take the short-cut and spin-wait on __readers because + then the waking thread cannot just make one final change to memory to + unblock all potentially waiting threads. If, for example, a reader + increments R in states #7 or #8, it has to then block until __wrphase_futex + is 0 and it can confirm that the value of 0 was stored by the primary + writer; in turn, the primary writer has to change to a read phase too when + releasing WL (i.e., to state #2), and it must change __wrphase_futex to 0 + as the next step. This ensures that the waiting reader will not be able to + acquire, release, and then destroy the lock concurrently with the pending + futex unblock operations by the former primary writer. This scheme is + called explicit hand-over in what follows. + Note that waiting threads can cancel waiting only if explicit hand-over has + not yet started (e.g., if __readers is still in states #7 or #8 in the + example above). + + Writers determine the primary writer through WL. Blocking using futexes + is performed using __writers_futex as a futex word; primary writers will + enable waiting on this futex by setting it to 1 after they acquired the WL + bit and will disable waiting by setting it to 0 before they release WL. + This leaves small windows where blocking using futexes is not possible + although a primary writer exists, but in turn decreases complexity of the + writer--writer synchronization and does not affect correctness. + If writers are preferred, writers can hand over WL directly to other + waiting writers that registered by incrementing __writers: If the primary + writer can CAS __writers from a non-zero value to the same value with the + PTHREAD_RWLOCK_WRHANDOVER bit set, it effectively transfers WL ownership + to one of the registered waiting writers and does not reset WL; in turn, + a registered writer that can clear PTHREAD_RWLOCK_WRHANDOVER using a CAS + then takes over WL. Note that registered waiting writers can cancel + waiting by decrementing __writers, but the last writer to unregister must + become the primary writer if PTHREAD_RWLOCK_WRHANDOVER is set. + Also note that adding another state/bit to signal potential writer--writer + contention (e.g., as done in the normal mutex algorithm) would not be + helpful because we would have to conservatively assume that there is in + fact no other writer, and wake up readers too. + + To avoid having to call futex_wake when no thread uses __wrphase_futex or + __writers_futex, threads will set the PTHREAD_RWLOCK_FUTEX_USED bit in the + respective futex words before waiting on it (using a CAS so it will only be + set if in a state in which waiting would be possible). In the case of + __writers_futex, we wake only one thread but several threads may share + PTHREAD_RWLOCK_FUTEX_USED, so we must assume that there are still others. + This is similar to what we do in pthread_mutex_lock. We do not need to + do this for __wrphase_futex because there, we always wake all waiting + threads. + + Blocking in the state #4a simply uses __readers as futex word. This + simplifies the algorithm but suffers from some of the drawbacks discussed + before, though not to the same extent because R can only decrease in this + state, so the number of potentially failing futex_wait attempts will be + bounded. All threads moving from state #4a to another state must wake + up threads blocked on the __readers futex. + + The ordering invariants that we have to take care of in the implementation + are primarily those necessary for a reader--writer lock; this is rather + straightforward and happens during write/read phase switching (potentially + through explicit hand-over), and between writers through synchronization + involving the PTHREAD_RWLOCK_WRLOCKED or PTHREAD_RWLOCK_WRHANDOVER bits. + Additionally, we need to take care that modifications of __writers_futex + and __wrphase_futex (e.g., by otherwise unordered readers) take place in + the writer critical sections or read/write phases, respectively, and that + explicit hand-over observes stores from the previous phase. How this is + done is explained in more detail in comments in the code. + + Many of the accesses to the futex words just need relaxed MO. This is + possible because we essentially drive both the core rwlock synchronization + and the futex synchronization in parallel. For example, an unlock will + unlock the rwlock and take part in the futex synchronization (using + PTHREAD_RWLOCK_FUTEX_USED, see above); even if they are not tightly + ordered in some way, the futex synchronization ensures that there are no + lost wake-ups, and woken threads will then eventually see the most recent + state of the rwlock. IOW, waiting threads will always be woken up, while + not being able to wait using futexes (which can happen) is harmless; in + turn, this means that waiting threads don't need special ordering wrt. + waking threads. + + The futex synchronization consists of the three-state futex word: + (1) cannot block on it, (2) can block on it, and (3) there might be a + thread blocked on it (i.e., with PTHREAD_RWLOCK_FUTEX_USED set). + Relaxed-MO atomic read-modify-write operations are sufficient to maintain + this (e.g., using a CAS to go from (2) to (3) but not from (1) to (3)), + but we need ordering of the futex word modifications by the waking threads + so that they collectively make correct state changes between (1)-(3). + The futex-internal synchronization (i.e., the conceptual critical sections + around futex operations in the kernel) then ensures that even an + unconstrained load (i.e., relaxed MO) inside of futex_wait will not lead to + lost wake-ups because either the waiting thread will see the change from + (3) to (1) when a futex_wake came first, or this futex_wake will wake this + waiting thread because the waiting thread came first. + + + POSIX allows but does not require rwlock acquisitions to be a cancellation + point. We do not support cancellation. + + TODO We do not try to elide any read or write lock acquisitions currently. + While this would be possible, it is unclear whether HTM performance is + currently predictable enough and our runtime tuning is good enough at + deciding when to use elision so that enabling it would lead to consistently + better performance. */ + + +static int +__pthread_rwlock_get_private (pthread_rwlock_t *rwlock) +{ + return rwlock->__data.__shared != 0 ? FUTEX_SHARED : FUTEX_PRIVATE; +} + +static __always_inline void +__pthread_rwlock_rdunlock (pthread_rwlock_t *rwlock) +{ + int private = __pthread_rwlock_get_private (rwlock); + /* We decrease the number of readers, and if we are the last reader and + there is a primary writer, we start a write phase. We use a CAS to + make this atomic so that it is clear whether we must hand over ownership + explicitly. */ + unsigned int r = atomic_load_relaxed (&rwlock->__data.__readers); + unsigned int rnew; + for (;;) + { + rnew = r - (1 << PTHREAD_RWLOCK_READER_SHIFT); + /* If we are the last reader, we also need to unblock any readers + that are waiting for a writer to go first (PTHREAD_RWLOCK_RWAITING) + so that they can register while the writer is active. */ + if ((rnew >> PTHREAD_RWLOCK_READER_SHIFT) == 0) + { + if ((rnew & PTHREAD_RWLOCK_WRLOCKED) != 0) + rnew |= PTHREAD_RWLOCK_WRPHASE; + rnew &= ~(unsigned int) PTHREAD_RWLOCK_RWAITING; + } + /* We need release MO here for three reasons. First, so that we + synchronize with subsequent writers. Second, we might have been the + first reader and set __wrphase_futex to 0, so we need to synchronize + with the last reader that will set it to 1 (note that we will always + change __readers before the last reader, or we are the last reader). + Third, a writer that takes part in explicit hand-over needs to see + the first reader's store to __wrphase_futex (or a later value) if + the writer observes that a write phase has been started. */ + if (atomic_compare_exchange_weak_release (&rwlock->__data.__readers, + &r, rnew)) + break; + /* TODO Back-off. */ + } + if ((rnew & PTHREAD_RWLOCK_WRPHASE) != 0) + { + /* We need to do explicit hand-over. We need the acquire MO fence so + that our modification of _wrphase_futex happens after a store by + another reader that started a read phase. Relaxed MO is sufficient + for the modification of __wrphase_futex because it is just used + to delay acquisition by a writer until all threads are unblocked + irrespective of whether they are looking at __readers or + __wrphase_futex; any other synchronizes-with relations that are + necessary are established through __readers. */ + atomic_thread_fence_acquire (); + if ((atomic_exchange_relaxed (&rwlock->__data.__wrphase_futex, 1) + & PTHREAD_RWLOCK_FUTEX_USED) != 0) + futex_wake (&rwlock->__data.__wrphase_futex, INT_MAX, private); + } + /* Also wake up waiting readers if we did reset the RWAITING flag. */ + if ((r & PTHREAD_RWLOCK_RWAITING) != (rnew & PTHREAD_RWLOCK_RWAITING)) + futex_wake (&rwlock->__data.__readers, INT_MAX, private); +} + + +static __always_inline int +__pthread_rwlock_rdlock_full (pthread_rwlock_t *rwlock, + const struct timespec *abstime) +{ + unsigned int r; + + /* Make sure we are not holding the rwlock as a writer. This is a deadlock + situation we recognize and report. */ + if (__glibc_unlikely (atomic_load_relaxed (&rwlock->__data.__cur_writer) + == THREAD_GETMEM (THREAD_SELF, tid))) + return EDEADLK; + + /* If we prefer writers, recursive rdlock is disallowed, we are in a read + phase, and there are other readers present, we try to wait without + extending the read phase. We will be unblocked by either one of the + other active readers, or if the writer gives up WRLOCKED (e.g., on + timeout). + If there are no other readers, we simply race with any existing primary + writer; it would have been a race anyway, and changing the odds slightly + will likely not make a big difference. */ + if (rwlock->__data.__flags == PTHREAD_RWLOCK_PREFER_WRITER_NONRECURSIVE_NP) + { + r = atomic_load_relaxed (&rwlock->__data.__readers); + while (((r & PTHREAD_RWLOCK_WRPHASE) == 0) + && ((r & PTHREAD_RWLOCK_WRLOCKED) != 0) + && ((r >> PTHREAD_RWLOCK_READER_SHIFT) > 0)) + { + /* TODO Spin first. */ + /* Try setting the flag signaling that we are waiting without having + incremented the number of readers. Relaxed MO is fine because + this is just about waiting for a state change in __readers. */ + if (atomic_compare_exchange_weak_relaxed + (&rwlock->__data.__readers, &r, r | PTHREAD_RWLOCK_RWAITING)) + { + /* Wait for as long as the flag is set. An ABA situation is + harmless because the flag is just about the state of + __readers, and all threads set the flag under the same + conditions. */ + while ((atomic_load_relaxed (&rwlock->__data.__readers) + & PTHREAD_RWLOCK_RWAITING) != 0) + { + int private = __pthread_rwlock_get_private (rwlock); + int err = futex_abstimed_wait (&rwlock->__data.__readers, + r, abstime, private); + /* We ignore EAGAIN and EINTR. On time-outs, we can just + return because we don't need to clean up anything. */ + if (err == ETIMEDOUT) + return err; + } + /* It makes sense to not break out of the outer loop here + because we might be in the same situation again. */ + } + else + { + /* TODO Back-off. */ + } + } + } + /* Register as a reader, using an add-and-fetch so that R can be used as + expected value for future operations. Acquire MO so we synchronize with + prior writers as well as the last reader of the previous read phase (see + below). */ + r = atomic_fetch_add_acquire (&rwlock->__data.__readers, + (1 << PTHREAD_RWLOCK_READER_SHIFT)) + (1 << PTHREAD_RWLOCK_READER_SHIFT); + + /* Check whether there is an overflow in the number of readers. We assume + that the total number of threads is less than half the maximum number + of readers that we have bits for in __readers (i.e., with 32-bit int and + PTHREAD_RWLOCK_READER_SHIFT of 3, we assume there are less than + 1 << (32-3-1) concurrent threads). + If there is an overflow, we use a CAS to try to decrement the number of + readers if there still is an overflow situation. If so, we return + EAGAIN; if not, we are not a thread causing an overflow situation, and so + we just continue. Using a fetch-add instead of the CAS isn't possible + because other readers might release the lock concurrently, which could + make us the last reader and thus responsible for handing ownership over + to writers (which requires a CAS too to make the decrement and ownership + transfer indivisible). */ + while (__glibc_unlikely (r >= PTHREAD_RWLOCK_READER_OVERFLOW)) + { + /* Relaxed MO is okay because we just want to undo our registration and + cannot have changed the rwlock state substantially if the CAS + succeeds. */ + if (atomic_compare_exchange_weak_relaxed (&rwlock->__data.__readers, &r, + r - (1 << PTHREAD_RWLOCK_READER_SHIFT))) + return EAGAIN; + } + + /* We have registered as a reader, so if we are in a read phase, we have + acquired a read lock. This is also the reader--reader fast-path. + Even if there is a primary writer, we just return. If writers are to + be preferred and we are the only active reader, we could try to enter a + write phase to let the writer proceed. This would be okay because we + cannot have acquired the lock previously as a reader (which could result + in deadlock if we would wait for the primary writer to run). However, + this seems to be a corner case and handling it specially not be worth the + complexity. */ + if (__glibc_likely ((r & PTHREAD_RWLOCK_WRPHASE) == 0)) + return 0; + + /* If there is no primary writer but we are in a write phase, we can try + to install a read phase ourself. */ + while (((r & PTHREAD_RWLOCK_WRPHASE) != 0) + && ((r & PTHREAD_RWLOCK_WRLOCKED) == 0)) + { + /* Try to enter a read phase: If the CAS below succeeds, we have + ownership; if it fails, we will simply retry and reassess the + situation. + Acquire MO so we synchronize with prior writers. */ + if (atomic_compare_exchange_weak_acquire (&rwlock->__data.__readers, &r, + r ^ PTHREAD_RWLOCK_WRPHASE)) + { + /* We started the read phase, so we are also responsible for + updating the write-phase futex. Relaxed MO is sufficient. + Note that there can be no other reader that we have to wake + because all other readers will see the read phase started by us + (or they will try to start it themselves); if a writer started + the read phase, we cannot have started it. Furthermore, we + cannot discard a PTHREAD_RWLOCK_FUTEX_USED flag because we will + overwrite the value set by the most recent writer (or the readers + before it in case of explicit hand-over) and we know that there + are no waiting readers. */ + atomic_store_relaxed (&rwlock->__data.__wrphase_futex, 0); + return 0; + } + else + { + /* TODO Back off before retrying. Also see above. */ + } + } + + if ((r & PTHREAD_RWLOCK_WRPHASE) != 0) + { + /* We are in a write phase, and there must be a primary writer because + of the previous loop. Block until the primary writer gives up the + write phase. This case requires explicit hand-over using + __wrphase_futex. + However, __wrphase_futex might not have been set to 1 yet (either + because explicit hand-over to the writer is still ongoing, or because + the writer has started the write phase but does not yet have updated + __wrphase_futex). The least recent value of __wrphase_futex we can + read from here is the modification of the last read phase (because + we synchronize with the last reader in this read phase through + __readers; see the use of acquire MO on the fetch_add above). + Therefore, if we observe a value of 0 for __wrphase_futex, we need + to subsequently check that __readers now indicates a read phase; we + need to use acquire MO for this so that if we observe a read phase, + we will also see the modification of __wrphase_futex by the previous + writer. We then need to load __wrphase_futex again and continue to + wait if it is not 0, so that we do not skip explicit hand-over. + Relaxed MO is sufficient for the load from __wrphase_futex because + we just use it as an indicator for when we can proceed; we use + __readers and the acquire MO accesses to it to eventually read from + the proper stores to __wrphase_futex. */ + unsigned int wpf; + bool ready = false; + for (;;) + { + while (((wpf = atomic_load_relaxed (&rwlock->__data.__wrphase_futex)) + | PTHREAD_RWLOCK_FUTEX_USED) == (1 | PTHREAD_RWLOCK_FUTEX_USED)) + { + int private = __pthread_rwlock_get_private (rwlock); + if (((wpf & PTHREAD_RWLOCK_FUTEX_USED) == 0) + && !atomic_compare_exchange_weak_relaxed + (&rwlock->__data.__wrphase_futex, + &wpf, wpf | PTHREAD_RWLOCK_FUTEX_USED)) + continue; + int err = futex_abstimed_wait (&rwlock->__data.__wrphase_futex, + 1 | PTHREAD_RWLOCK_FUTEX_USED, abstime, private); + if (err == ETIMEDOUT) + { + /* If we timed out, we need to unregister. If no read phase + has been installed while we waited, we can just decrement + the number of readers. Otherwise, we just acquire the + lock, which is allowed because we give no precise timing + guarantees, and because the timeout is only required to + be in effect if we would have had to wait for other + threads (e.g., if futex_wait would time-out immediately + because the given absolute time is in the past). */ + r = atomic_load_relaxed (&rwlock->__data.__readers); + while ((r & PTHREAD_RWLOCK_WRPHASE) != 0) + { + /* We don't need to make anything else visible to + others besides unregistering, so relaxed MO is + sufficient. */ + if (atomic_compare_exchange_weak_relaxed + (&rwlock->__data.__readers, &r, + r - (1 << PTHREAD_RWLOCK_READER_SHIFT))) + return ETIMEDOUT; + /* TODO Back-off. */ + } + /* Use the acquire MO fence to mirror the steps taken in the + non-timeout case. Note that the read can happen both + in the atomic_load above as well as in the failure case + of the CAS operation. */ + atomic_thread_fence_acquire (); + /* We still need to wait for explicit hand-over, but we must + not use futex_wait anymore because we would just time out + in this case and thus make the spin-waiting we need + unnecessarily expensive. */ + while ((atomic_load_relaxed (&rwlock->__data.__wrphase_futex) + | PTHREAD_RWLOCK_FUTEX_USED) + == (1 | PTHREAD_RWLOCK_FUTEX_USED)) + { + /* TODO Back-off? */ + } + ready = true; + break; + } + /* If we got interrupted (EINTR) or the futex word does not have the + expected value (EAGAIN), retry. */ + } + if (ready) + /* See below. */ + break; + /* We need acquire MO here so that we synchronize with the lock + release of the writer, and so that we observe a recent value of + __wrphase_futex (see below). */ + if ((atomic_load_acquire (&rwlock->__data.__readers) + & PTHREAD_RWLOCK_WRPHASE) == 0) + /* We are in a read phase now, so the least recent modification of + __wrphase_futex we can read from is the store by the writer + with value 1. Thus, only now we can assume that if we observe + a value of 0, explicit hand-over is finished. Retry the loop + above one more time. */ + ready = true; + } + } + + return 0; +} + + +static __always_inline void +__pthread_rwlock_wrunlock (pthread_rwlock_t *rwlock) +{ + int private = __pthread_rwlock_get_private (rwlock); + + atomic_store_relaxed (&rwlock->__data.__cur_writer, 0); + /* Disable waiting by writers. We will wake up after we decided how to + proceed. */ + bool wake_writers = ((atomic_exchange_relaxed + (&rwlock->__data.__writers_futex, 0) & PTHREAD_RWLOCK_FUTEX_USED) != 0); + + if (rwlock->__data.__flags != PTHREAD_RWLOCK_PREFER_READER_NP) + { + /* First, try to hand over to another writer. */ + unsigned int w = atomic_load_relaxed (&rwlock->__data.__writers); + while (w != 0) + { + /* Release MO so that another writer that gets WRLOCKED from us will + synchronize with us and thus can take over our view of + __readers (including, for example, whether we are in a write + phase or not). */ + if (atomic_compare_exchange_weak_release (&rwlock->__data.__writers, + &w, w | PTHREAD_RWLOCK_WRHANDOVER)) + /* Another writer will take over. */ + goto done; + /* TODO Back-off. */ + } + } + + /* We have done everything we needed to do to prefer writers, so now we + either hand over explicitly to readers if there are any, or we simply + stay in a write phase. See pthread_rwlock_rdunlock for more details. */ + unsigned int r = atomic_load_relaxed (&rwlock->__data.__readers); + /* Release MO so that subsequent readers or writers synchronize with us. */ + while (!atomic_compare_exchange_weak_release + (&rwlock->__data.__readers, &r, (r ^ PTHREAD_RWLOCK_WRLOCKED) + ^ ((r >> PTHREAD_RWLOCK_READER_SHIFT) == 0 ? 0 + : PTHREAD_RWLOCK_WRPHASE))) + { + /* TODO Back-off. */ + } + if ((r >> PTHREAD_RWLOCK_READER_SHIFT) != 0) + { + /* We must hand over explicitly through __wrphase_futex. Relaxed MO is + sufficient because it is just used to delay acquisition by a writer; + any other synchronizes-with relations that are necessary are + established through __readers. */ + if ((atomic_exchange_relaxed (&rwlock->__data.__wrphase_futex, 0) + & PTHREAD_RWLOCK_FUTEX_USED) != 0) + futex_wake (&rwlock->__data.__wrphase_futex, INT_MAX, private); + } + + done: + /* We released WRLOCKED in some way, so wake a writer. */ + if (wake_writers) + futex_wake (&rwlock->__data.__writers_futex, 1, private); +} + + +static __always_inline int +__pthread_rwlock_wrlock_full (pthread_rwlock_t *rwlock, + const struct timespec *abstime) +{ + /* Make sure we are not holding the rwlock as a writer. This is a deadlock + situation we recognize and report. */ + if (__glibc_unlikely (atomic_load_relaxed (&rwlock->__data.__cur_writer) + == THREAD_GETMEM (THREAD_SELF, tid))) + return EDEADLK; + + /* First we try to acquire the role of primary writer by setting WRLOCKED; + if it was set before, there already is a primary writer. Acquire MO so + that we synchronize with previous primary writers. + + We do not try to change to a write phase right away using a fetch_or + because we would have to reset it again and wake readers if there are + readers present (some readers could try to acquire the lock more than + once, so setting a write phase in the middle of this could cause + deadlock). Changing to a write phase eagerly would only speed up the + transition from a read phase to a write phase in the uncontended case, + but it would slow down the contended case if readers are preferred (which + is the default). + We could try to CAS from a state with no readers to a write phase, but + this could be less scalable if readers arrive and leave frequently. */ + bool may_share_futex_used_flag = false; + unsigned int r = atomic_fetch_or_acquire (&rwlock->__data.__readers, + PTHREAD_RWLOCK_WRLOCKED); + if (__glibc_unlikely ((r & PTHREAD_RWLOCK_WRLOCKED) != 0)) + { + /* There is another primary writer. */ + bool prefer_writer = + (rwlock->__data.__flags != PTHREAD_RWLOCK_PREFER_READER_NP); + if (prefer_writer) + { + /* We register as a waiting writer, so that we can make use of + writer--writer hand-over. Relaxed MO is fine because we just + want to register. We assume that the maximum number of threads + is less than the capacity in __writers. */ + atomic_fetch_add_relaxed (&rwlock->__data.__writers, 1); + } + for (;;) + { + /* TODO Spin until WRLOCKED is 0 before trying the CAS below. + But pay attention to not delay trying writer--writer hand-over + for too long (which we must try eventually anyway). */ + if ((r & PTHREAD_RWLOCK_WRLOCKED) == 0) + { + /* Try to become the primary writer or retry. Acquire MO as in + the fetch_or above. */ + if (atomic_compare_exchange_weak_acquire + (&rwlock->__data.__readers, &r, + r | PTHREAD_RWLOCK_WRLOCKED)) + { + if (prefer_writer) + { + /* Unregister as a waiting writer. Note that because we + acquired WRLOCKED, WRHANDOVER will not be set. + Acquire MO on the CAS above ensures that + unregistering happens after the previous writer; + this sorts the accesses to __writers by all + primary writers in a useful way (e.g., any other + primary writer acquiring after us or getting it from + us through WRHANDOVER will see both our changes to + __writers). + ??? Perhaps this is not strictly necessary for + reasons we do not yet know of. */ + atomic_fetch_add_relaxed (&rwlock->__data.__writers, + -1); + } + break; + } + /* Retry if the CAS fails (r will have been updated). */ + continue; + } + /* If writer--writer hand-over is available, try to become the + primary writer this way by grabbing the WRHANDOVER token. If we + succeed, we own WRLOCKED. */ + if (prefer_writer) + { + unsigned int w = atomic_load_relaxed + (&rwlock->__data.__writers); + if ((w & PTHREAD_RWLOCK_WRHANDOVER) != 0) + { + /* Acquire MO is required here so that we synchronize with + the writer that handed over WRLOCKED. We also need this + for the reload of __readers below because our view of + __readers must be at least as recent as the view of the + writer that handed over WRLOCKED; we must avoid an ABA + through WRHANDOVER, which could, for example, lead to us + assuming we are still in a write phase when in fact we + are not. */ + if (atomic_compare_exchange_weak_acquire + (&rwlock->__data.__writers, + &w, (w - PTHREAD_RWLOCK_WRHANDOVER - 1))) + { + /* Reload so our view is consistent with the view of + the previous owner of WRLOCKED. See above. */ + r = atomic_load_relaxed (&rwlock->__data.__readers); + break; + } + /* We do not need to reload __readers here. We should try + to perform writer--writer hand-over if possible; if it + is not possible anymore, we will reload __readers + elsewhere in this loop. */ + continue; + } + } + /* We did not acquire WRLOCKED nor were able to use writer--writer + hand-over, so we block on __writers_futex. */ + int private = __pthread_rwlock_get_private (rwlock); + unsigned int wf = atomic_load_relaxed + (&rwlock->__data.__writers_futex); + if (((wf & ~(unsigned int) PTHREAD_RWLOCK_FUTEX_USED) != 1) + || ((wf != (1 | PTHREAD_RWLOCK_FUTEX_USED)) + && !atomic_compare_exchange_weak_relaxed + (&rwlock->__data.__writers_futex, &wf, + 1 | PTHREAD_RWLOCK_FUTEX_USED))) + { + /* If we cannot block on __writers_futex because there is no + primary writer, or we cannot set PTHREAD_RWLOCK_FUTEX_USED, + we retry. We must reload __readers here in case we cannot + block on __writers_futex so that we can become the primary + writer and are not stuck in a loop that just continuously + fails to block on __writers_futex. */ + r = atomic_load_relaxed (&rwlock->__data.__readers); + continue; + } + /* We set the flag that signals that the futex is used, or we could + have set it if we had been faster than other waiters. As a + result, we may share the flag with an unknown number of other + writers. Therefore, we must keep this flag set when we acquire + the lock. We do not need to do this when we do not reach this + point here because then we are not part of the group that may + share the flag, and another writer will wake one of the writers + in this group. */ + may_share_futex_used_flag = true; + int err = futex_abstimed_wait (&rwlock->__data.__writers_futex, + 1 | PTHREAD_RWLOCK_FUTEX_USED, abstime, private); + if (err == ETIMEDOUT) + { + if (prefer_writer) + { + /* We need to unregister as a waiting writer. If we are the + last writer and writer--writer hand-over is available, + we must make use of it because nobody else will reset + WRLOCKED otherwise. (If we use it, we simply pretend + that this happened before the timeout; see + pthread_rwlock_rdlock_full for the full reasoning.) + Also see the similar code above. */ + unsigned int w = atomic_load_relaxed + (&rwlock->__data.__writers); + while (!atomic_compare_exchange_weak_acquire + (&rwlock->__data.__writers, &w, + (w == PTHREAD_RWLOCK_WRHANDOVER + 1 ? 0 : w - 1))) + { + /* TODO Back-off. */ + } + if (w == PTHREAD_RWLOCK_WRHANDOVER + 1) + { + /* We must continue as primary writer. See above. */ + r = atomic_load_relaxed (&rwlock->__data.__readers); + break; + } + } + /* We cleaned up and cannot have stolen another waiting writer's + futex wake-up, so just return. */ + return ETIMEDOUT; + } + /* If we got interrupted (EINTR) or the futex word does not have the + expected value (EAGAIN), retry after reloading __readers. */ + r = atomic_load_relaxed (&rwlock->__data.__readers); + } + /* Our snapshot of __readers is up-to-date at this point because we + either set WRLOCKED using a CAS or were handed over WRLOCKED from + another writer whose snapshot of __readers we inherit. */ + } + + /* If we are in a read phase and there are no readers, try to start a write + phase. */ + while (((r & PTHREAD_RWLOCK_WRPHASE) == 0) + && ((r >> PTHREAD_RWLOCK_READER_SHIFT) == 0)) + { + /* Acquire MO so that we synchronize with prior writers and do + not interfere with their updates to __writers_futex, as well + as regarding prior readers and their updates to __wrphase_futex, + respectively. */ + if (atomic_compare_exchange_weak_acquire (&rwlock->__data.__readers, + &r, r | PTHREAD_RWLOCK_WRPHASE)) + { + /* We have started a write phase, so need to enable readers to wait. + See the similar case in__pthread_rwlock_rdlock_full. */ + atomic_store_relaxed (&rwlock->__data.__wrphase_futex, 1); + /* Make sure we fall through to the end of the function. */ + r |= PTHREAD_RWLOCK_WRPHASE; + break; + } + /* TODO Back-off. */ + } + + /* We are the primary writer; enable blocking on __writers_futex. Relaxed + MO is sufficient for futex words; acquire MO on the previous + modifications of __readers ensures that this store happens after the + store of value 0 by the previous primary writer. */ + atomic_store_relaxed (&rwlock->__data.__writers_futex, + 1 | (may_share_futex_used_flag ? PTHREAD_RWLOCK_FUTEX_USED : 0)); + + if (__glibc_unlikely ((r & PTHREAD_RWLOCK_WRPHASE) == 0)) + { + /* We are not in a read phase and there are readers (because of the + previous loop). Thus, we have to wait for explicit hand-over from + one of these readers. + We basically do the same steps as for the similar case in + __pthread_rwlock_rdlock_full, except that we additionally might try + to directly hand over to another writer and need to wake up + other writers or waiting readers (i.e., PTHREAD_RWLOCK_RWAITING). */ + unsigned int wpf; + bool ready = false; + for (;;) + { + while (((wpf = atomic_load_relaxed (&rwlock->__data.__wrphase_futex)) + | PTHREAD_RWLOCK_FUTEX_USED) == PTHREAD_RWLOCK_FUTEX_USED) + { + int private = __pthread_rwlock_get_private (rwlock); + if (((wpf & PTHREAD_RWLOCK_FUTEX_USED) == 0) + && !atomic_compare_exchange_weak_relaxed + (&rwlock->__data.__wrphase_futex, &wpf, + PTHREAD_RWLOCK_FUTEX_USED)) + continue; + int err = futex_abstimed_wait (&rwlock->__data.__wrphase_futex, + PTHREAD_RWLOCK_FUTEX_USED, abstime, private); + if (err == ETIMEDOUT) + { + if (rwlock->__data.__flags + != PTHREAD_RWLOCK_PREFER_READER_NP) + { + /* We try writer--writer hand-over. */ + unsigned int w = atomic_load_relaxed + (&rwlock->__data.__writers); + if (w != 0) + { + /* We are about to hand over WRLOCKED, so we must + release __writers_futex too; otherwise, we'd have + a pending store, which could at least prevent + other threads from waiting using the futex + because it could interleave with the stores + by subsequent writers. In turn, this means that + we have to clean up when we do not hand over + WRLOCKED. + Release MO so that another writer that gets + WRLOCKED from us can take over our view of + __readers. */ + unsigned int wf = atomic_exchange_relaxed + (&rwlock->__data.__writers_futex, 0); + while (w != 0) + { + if (atomic_compare_exchange_weak_release + (&rwlock->__data.__writers, &w, + w | PTHREAD_RWLOCK_WRHANDOVER)) + { + /* Wake other writers. */ + if ((wf & PTHREAD_RWLOCK_FUTEX_USED) != 0) + futex_wake + (&rwlock->__data.__writers_futex, 1, + private); + return ETIMEDOUT; + } + /* TODO Back-off. */ + } + /* We still own WRLOCKED and someone else might set + a write phase concurrently, so enable waiting + again. Make sure we don't loose the flag that + signals whether there are threads waiting on + this futex. */ + atomic_store_relaxed + (&rwlock->__data.__writers_futex, wf); + } + } + /* If we timed out and we are not in a write phase, we can + just stop being a primary writer. Otherwise, we just + acquire the lock. */ + r = atomic_load_relaxed (&rwlock->__data.__readers); + if ((r & PTHREAD_RWLOCK_WRPHASE) == 0) + { + /* We are about to release WRLOCKED, so we must release + __writers_futex too; see the handling of + writer--writer hand-over above. */ + unsigned int wf = atomic_exchange_relaxed + (&rwlock->__data.__writers_futex, 0); + while ((r & PTHREAD_RWLOCK_WRPHASE) == 0) + { + /* While we don't need to make anything from a + caller's critical section visible to other + threads, we need to ensure that our changes to + __writers_futex are properly ordered. + Therefore, use release MO to synchronize with + subsequent primary writers. Also wake up any + waiting readers as they are waiting because of + us. */ + if (atomic_compare_exchange_weak_release + (&rwlock->__data.__readers, &r, + (r ^ PTHREAD_RWLOCK_WRLOCKED) + & ~(unsigned int) PTHREAD_RWLOCK_RWAITING)) + { + /* Wake other writers. */ + if ((wf & PTHREAD_RWLOCK_FUTEX_USED) != 0) + futex_wake (&rwlock->__data.__writers_futex, + 1, private); + /* Wake waiting readers. */ + if ((r & PTHREAD_RWLOCK_RWAITING) != 0) + futex_wake (&rwlock->__data.__readers, + INT_MAX, private); + return ETIMEDOUT; + } + } + /* We still own WRLOCKED and someone else might set a + write phase concurrently, so enable waiting again. + Make sure we don't loose the flag that signals + whether there are threads waiting on this futex. */ + atomic_store_relaxed (&rwlock->__data.__writers_futex, + wf); + } + /* Use the acquire MO fence to mirror the steps taken in the + non-timeout case. Note that the read can happen both + in the atomic_load above as well as in the failure case + of the CAS operation. */ + atomic_thread_fence_acquire (); + /* We still need to wait for explicit hand-over, but we must + not use futex_wait anymore. */ + while ((atomic_load_relaxed + (&rwlock->__data.__wrphase_futex) + | PTHREAD_RWLOCK_FUTEX_USED) + == PTHREAD_RWLOCK_FUTEX_USED) + { + /* TODO Back-off. */ + } + ready = true; + break; + } + /* If we got interrupted (EINTR) or the futex word does not have + the expected value (EAGAIN), retry. */ + } + /* See pthread_rwlock_rdlock_full. */ + if (ready) + break; + if ((atomic_load_acquire (&rwlock->__data.__readers) + & PTHREAD_RWLOCK_WRPHASE) != 0) + ready = true; + } + } + + atomic_store_relaxed (&rwlock->__data.__cur_writer, + THREAD_GETMEM (THREAD_SELF, tid)); + return 0; +} diff --git a/nptl/pthread_rwlock_init.c b/nptl/pthread_rwlock_init.c index 1687f22a9e..764ba110fb 100644 --- a/nptl/pthread_rwlock_init.c +++ b/nptl/pthread_rwlock_init.c @@ -18,7 +18,6 @@ #include "pthreadP.h" #include -#include static const struct pthread_rwlockattr default_rwlockattr = @@ -28,6 +27,7 @@ static const struct pthread_rwlockattr default_rwlockattr = }; +/* See pthread_rwlock_common.c. */ int __pthread_rwlock_init (pthread_rwlock_t *rwlock, const pthread_rwlockattr_t *attr) @@ -38,27 +38,10 @@ __pthread_rwlock_init (pthread_rwlock_t *rwlock, memset (rwlock, '\0', sizeof (*rwlock)); - rwlock->__data.__flags - = iattr->lockkind == PTHREAD_RWLOCK_PREFER_WRITER_NONRECURSIVE_NP; + rwlock->__data.__flags = iattr->lockkind; - /* The __SHARED field is computed to minimize the work that needs to - be done while handling the futex. There are two inputs: the - availability of private futexes and whether the rwlock is shared - or private. Unfortunately the value of a private rwlock is - fixed: it must be zero. The PRIVATE_FUTEX flag has the value - 0x80 in case private futexes are available and zero otherwise. - This leads to the following table: - - | pshared | result - | shared private | shared private | - ------------+-----------------+-----------------+ - !avail 0 | 0 0 | 0 0 | - avail 0x80 | 0x80 0 | 0 0x80 | - - If the pshared value is in locking functions XORed with avail - we get the expected result. */ - rwlock->__data.__shared = (iattr->pshared == PTHREAD_PROCESS_PRIVATE - ? 0 : FUTEX_PRIVATE_FLAG); + /* The value of __SHARED in a private rwlock must be zero. */ + rwlock->__data.__shared = (iattr->pshared != PTHREAD_PROCESS_PRIVATE); return 0; } diff --git a/nptl/pthread_rwlock_rdlock.c b/nptl/pthread_rwlock_rdlock.c index 8adefc32c0..e07581bbf5 100644 --- a/nptl/pthread_rwlock_rdlock.c +++ b/nptl/pthread_rwlock_rdlock.c @@ -16,165 +16,17 @@ License along with the GNU C Library; if not, see . */ -#include -#include -#include -#include -#include -#include -#include -#include -#include - - -/* Acquire read lock for RWLOCK. Slow path. */ -static int __attribute__((noinline)) -__pthread_rwlock_rdlock_slow (pthread_rwlock_t *rwlock) -{ - int result = 0; - bool wake = false; - int futex_shared = - rwlock->__data.__shared == LLL_PRIVATE ? FUTEX_PRIVATE : FUTEX_SHARED; - - /* Lock is taken in caller. */ - - while (1) - { - /* Make sure we are not holding the rwlock as a writer. This is - a deadlock situation we recognize and report. */ - if (__builtin_expect (rwlock->__data.__writer - == THREAD_GETMEM (THREAD_SELF, tid), 0)) - { - result = EDEADLK; - break; - } - - /* Remember that we are a reader. */ - if (__glibc_unlikely (++rwlock->__data.__nr_readers_queued == 0)) - { - /* Overflow on number of queued readers. */ - --rwlock->__data.__nr_readers_queued; - result = EAGAIN; - break; - } - - int waitval = rwlock->__data.__readers_wakeup; - - /* Free the lock. */ - lll_unlock (rwlock->__data.__lock, rwlock->__data.__shared); - - /* Wait for the writer to finish. We do not check the return value - because we decide how to continue based on the state of the rwlock. */ - futex_wait_simple (&rwlock->__data.__readers_wakeup, waitval, - futex_shared); - - /* Get the lock. */ - lll_lock (rwlock->__data.__lock, rwlock->__data.__shared); - - --rwlock->__data.__nr_readers_queued; - - /* Get the rwlock if there is no writer... */ - if (rwlock->__data.__writer == 0 - /* ...and if either no writer is waiting or we prefer readers. */ - && (!rwlock->__data.__nr_writers_queued - || PTHREAD_RWLOCK_PREFER_READER_P (rwlock))) - { - /* Increment the reader counter. Avoid overflow. */ - if (__glibc_unlikely (++rwlock->__data.__nr_readers == 0)) - { - /* Overflow on number of readers. */ - --rwlock->__data.__nr_readers; - result = EAGAIN; - } - else - { - LIBC_PROBE (rdlock_acquire_read, 1, rwlock); - /* See pthread_rwlock_rdlock. */ - if (rwlock->__data.__nr_readers == 1 - && rwlock->__data.__nr_readers_queued > 0 - && rwlock->__data.__nr_writers_queued > 0) - { - ++rwlock->__data.__readers_wakeup; - wake = true; - } - } - - break; - } - } - - /* We are done, free the lock. */ - lll_unlock (rwlock->__data.__lock, rwlock->__data.__shared); - - if (wake) - futex_wake (&rwlock->__data.__readers_wakeup, INT_MAX, futex_shared); - - return result; -} - - -/* Fast path of acquiring read lock on RWLOCK. */ +#include "pthread_rwlock_common.c" +/* See pthread_rwlock_common.c. */ int __pthread_rwlock_rdlock (pthread_rwlock_t *rwlock) { - int result = 0; - bool wake = false; - int futex_shared = - rwlock->__data.__shared == LLL_PRIVATE ? FUTEX_PRIVATE : FUTEX_SHARED; - LIBC_PROBE (rdlock_entry, 1, rwlock); - if (ELIDE_LOCK (rwlock->__data.__rwelision, - rwlock->__data.__lock == 0 - && rwlock->__data.__writer == 0 - && rwlock->__data.__nr_readers == 0)) - return 0; - - /* Make sure we are alone. */ - lll_lock (rwlock->__data.__lock, rwlock->__data.__shared); - - /* Get the rwlock if there is no writer... */ - if (rwlock->__data.__writer == 0 - /* ...and if either no writer is waiting or we prefer readers. */ - && (!rwlock->__data.__nr_writers_queued - || PTHREAD_RWLOCK_PREFER_READER_P (rwlock))) - { - /* Increment the reader counter. Avoid overflow. */ - if (__glibc_unlikely (++rwlock->__data.__nr_readers == 0)) - { - /* Overflow on number of readers. */ - --rwlock->__data.__nr_readers; - result = EAGAIN; - } - else - { - LIBC_PROBE (rdlock_acquire_read, 1, rwlock); - /* If we are the first reader, and there are blocked readers and - writers (which we don't prefer, see above), then it can be the - case that we stole the lock from a writer that was already woken - to acquire it. That means that we need to take over the writer's - responsibility to wake all readers (see pthread_rwlock_unlock). - Thus, wake all readers in this case. */ - if (rwlock->__data.__nr_readers == 1 - && rwlock->__data.__nr_readers_queued > 0 - && rwlock->__data.__nr_writers_queued > 0) - { - ++rwlock->__data.__readers_wakeup; - wake = true; - } - } - - /* We are done, free the lock. */ - lll_unlock (rwlock->__data.__lock, rwlock->__data.__shared); - - if (wake) - futex_wake (&rwlock->__data.__readers_wakeup, INT_MAX, futex_shared); - - return result; - } - - return __pthread_rwlock_rdlock_slow (rwlock); + int result = __pthread_rwlock_rdlock_full (rwlock, NULL); + LIBC_PROBE (rdlock_acquire_read, 1, rwlock); + return result; } weak_alias (__pthread_rwlock_rdlock, pthread_rwlock_rdlock) diff --git a/nptl/pthread_rwlock_timedrdlock.c b/nptl/pthread_rwlock_timedrdlock.c index 003ea573c9..9f084f8c34 100644 --- a/nptl/pthread_rwlock_timedrdlock.c +++ b/nptl/pthread_rwlock_timedrdlock.c @@ -16,121 +16,22 @@ License along with the GNU C Library; if not, see . */ -#include -#include -#include -#include -#include -#include -#include -#include +#include "pthread_rwlock_common.c" - -/* Try to acquire read lock for RWLOCK or return after specfied time. */ +/* See pthread_rwlock_common.c. */ int pthread_rwlock_timedrdlock (pthread_rwlock_t *rwlock, - const struct timespec *abstime) + const struct timespec *abstime) { - int result = 0; - bool wake = false; - int futex_shared = - rwlock->__data.__shared == LLL_PRIVATE ? FUTEX_PRIVATE : FUTEX_SHARED; + /* Make sure the passed in timeout value is valid. Note that the previous + implementation assumed that this check *must* not be performed if there + would in fact be no blocking; however, POSIX only requires that "the + validity of the abstime parameter need not be checked if the lock can be + immediately acquired" (i.e., we need not but may check it). */ + /* ??? Just move this to __pthread_rwlock_rdlock_full? */ + if (__glibc_unlikely (abstime->tv_nsec >= 1000000000 + || abstime->tv_nsec < 0)) + return EINVAL; - /* Make sure we are alone. */ - lll_lock(rwlock->__data.__lock, rwlock->__data.__shared); - - while (1) - { - int err; - - /* Get the rwlock if there is no writer... */ - if (rwlock->__data.__writer == 0 - /* ...and if either no writer is waiting or we prefer readers. */ - && (!rwlock->__data.__nr_writers_queued - || PTHREAD_RWLOCK_PREFER_READER_P (rwlock))) - { - /* Increment the reader counter. Avoid overflow. */ - if (++rwlock->__data.__nr_readers == 0) - { - /* Overflow on number of readers. */ - --rwlock->__data.__nr_readers; - result = EAGAIN; - } - else - { - /* See pthread_rwlock_rdlock. */ - if (rwlock->__data.__nr_readers == 1 - && rwlock->__data.__nr_readers_queued > 0 - && rwlock->__data.__nr_writers_queued > 0) - { - ++rwlock->__data.__readers_wakeup; - wake = true; - } - } - - break; - } - - /* Make sure we are not holding the rwlock as a writer. This is - a deadlock situation we recognize and report. */ - if (__builtin_expect (rwlock->__data.__writer - == THREAD_GETMEM (THREAD_SELF, tid), 0)) - { - result = EDEADLK; - break; - } - - /* Make sure the passed in timeout value is valid. Ideally this - test would be executed once. But since it must not be - performed if we would not block at all simply moving the test - to the front is no option. Replicating all the code is - costly while this test is not. */ - if (__builtin_expect (abstime->tv_nsec >= 1000000000 - || abstime->tv_nsec < 0, 0)) - { - result = EINVAL; - break; - } - - /* Remember that we are a reader. */ - if (++rwlock->__data.__nr_readers_queued == 0) - { - /* Overflow on number of queued readers. */ - --rwlock->__data.__nr_readers_queued; - result = EAGAIN; - break; - } - - int waitval = rwlock->__data.__readers_wakeup; - - /* Free the lock. */ - lll_unlock (rwlock->__data.__lock, rwlock->__data.__shared); - - /* Wait for the writer to finish. We handle ETIMEDOUT below; on other - return values, we decide how to continue based on the state of the - rwlock. */ - err = futex_abstimed_wait (&rwlock->__data.__readers_wakeup, waitval, - abstime, futex_shared); - - /* Get the lock. */ - lll_lock (rwlock->__data.__lock, rwlock->__data.__shared); - - --rwlock->__data.__nr_readers_queued; - - /* Did the futex call time out? */ - if (err == ETIMEDOUT) - { - /* Yep, report it. */ - result = ETIMEDOUT; - break; - } - } - - /* We are done, free the lock. */ - lll_unlock (rwlock->__data.__lock, rwlock->__data.__shared); - - if (wake) - futex_wake (&rwlock->__data.__readers_wakeup, INT_MAX, futex_shared); - - return result; + return __pthread_rwlock_rdlock_full (rwlock, abstime); } diff --git a/nptl/pthread_rwlock_timedwrlock.c b/nptl/pthread_rwlock_timedwrlock.c index 9f024be819..5626505d2c 100644 --- a/nptl/pthread_rwlock_timedwrlock.c +++ b/nptl/pthread_rwlock_timedwrlock.c @@ -16,121 +16,22 @@ License along with the GNU C Library; if not, see . */ -#include -#include -#include -#include -#include -#include -#include -#include +#include "pthread_rwlock_common.c" - -/* Try to acquire write lock for RWLOCK or return after specfied time. */ +/* See pthread_rwlock_common.c. */ int pthread_rwlock_timedwrlock (pthread_rwlock_t *rwlock, - const struct timespec *abstime) + const struct timespec *abstime) { - int result = 0; - bool wake_readers = false; - int futex_shared = - rwlock->__data.__shared == LLL_PRIVATE ? FUTEX_PRIVATE : FUTEX_SHARED; + /* Make sure the passed in timeout value is valid. Note that the previous + implementation assumed that this check *must* not be performed if there + would in fact be no blocking; however, POSIX only requires that "the + validity of the abstime parameter need not be checked if the lock can be + immediately acquired" (i.e., we need not but may check it). */ + /* ??? Just move this to __pthread_rwlock_wrlock_full? */ + if (__glibc_unlikely (abstime->tv_nsec >= 1000000000 + || abstime->tv_nsec < 0)) + return EINVAL; - /* Make sure we are alone. */ - lll_lock (rwlock->__data.__lock, rwlock->__data.__shared); - - while (1) - { - int err; - - /* Get the rwlock if there is no writer and no reader. */ - if (rwlock->__data.__writer == 0 && rwlock->__data.__nr_readers == 0) - { - /* Mark self as writer. */ - rwlock->__data.__writer = THREAD_GETMEM (THREAD_SELF, tid); - break; - } - - /* Make sure we are not holding the rwlock as a writer. This is - a deadlock situation we recognize and report. */ - if (__builtin_expect (rwlock->__data.__writer - == THREAD_GETMEM (THREAD_SELF, tid), 0)) - { - result = EDEADLK; - break; - } - - /* Make sure the passed in timeout value is valid. Ideally this - test would be executed once. But since it must not be - performed if we would not block at all simply moving the test - to the front is no option. Replicating all the code is - costly while this test is not. */ - if (__builtin_expect (abstime->tv_nsec >= 1000000000 - || abstime->tv_nsec < 0, 0)) - { - result = EINVAL; - break; - } - - /* Remember that we are a writer. */ - if (++rwlock->__data.__nr_writers_queued == 0) - { - /* Overflow on number of queued writers. */ - --rwlock->__data.__nr_writers_queued; - result = EAGAIN; - break; - } - - int waitval = rwlock->__data.__writer_wakeup; - - /* Free the lock. */ - lll_unlock (rwlock->__data.__lock, rwlock->__data.__shared); - - /* Wait for the writer or reader(s) to finish. We handle ETIMEDOUT - below; on other return values, we decide how to continue based on - the state of the rwlock. */ - err = futex_abstimed_wait (&rwlock->__data.__writer_wakeup, waitval, - abstime, futex_shared); - - /* Get the lock. */ - lll_lock (rwlock->__data.__lock, rwlock->__data.__shared); - - /* To start over again, remove the thread from the writer list. */ - --rwlock->__data.__nr_writers_queued; - - /* Did the futex call time out? */ - if (err == ETIMEDOUT) - { - result = ETIMEDOUT; - /* If we prefer writers, it can have happened that readers blocked - for us to acquire the lock first. If we have timed out, we need - to wake such readers if there are any, and if there is no writer - currently (otherwise, the writer will take care of wake-up). - Likewise, even if we prefer readers, we can be responsible for - wake-up (see pthread_rwlock_unlock) if no reader or writer has - acquired the lock. We have timed out and thus not consumed a - futex wake-up; therefore, if there is no other blocked writer - that would consume the wake-up and thus take over responsibility, - we need to wake blocked readers. */ - if ((!PTHREAD_RWLOCK_PREFER_READER_P (rwlock) - || ((rwlock->__data.__nr_readers == 0) - && (rwlock->__data.__nr_writers_queued == 0))) - && (rwlock->__data.__nr_readers_queued > 0) - && (rwlock->__data.__writer == 0)) - { - ++rwlock->__data.__readers_wakeup; - wake_readers = true; - } - break; - } - } - - /* We are done, free the lock. */ - lll_unlock (rwlock->__data.__lock, rwlock->__data.__shared); - - /* Might be required after timeouts. */ - if (wake_readers) - futex_wake (&rwlock->__data.__readers_wakeup, INT_MAX, futex_shared); - - return result; + return __pthread_rwlock_wrlock_full (rwlock, abstime); } diff --git a/nptl/pthread_rwlock_tryrdlock.c b/nptl/pthread_rwlock_tryrdlock.c index cdd73d25eb..6c3014ce53 100644 --- a/nptl/pthread_rwlock_tryrdlock.c +++ b/nptl/pthread_rwlock_tryrdlock.c @@ -18,56 +18,95 @@ #include #include "pthreadP.h" -#include -#include -#include +#include #include +#include "pthread_rwlock_common.c" +/* See pthread_rwlock_common.c for an overview. */ int __pthread_rwlock_tryrdlock (pthread_rwlock_t *rwlock) { - int result = EBUSY; - bool wake = false; - int futex_shared = - rwlock->__data.__shared == LLL_PRIVATE ? FUTEX_PRIVATE : FUTEX_SHARED; - - if (ELIDE_TRYLOCK (rwlock->__data.__rwelision, - rwlock->__data.__lock == 0 - && rwlock->__data.__nr_readers == 0 - && rwlock->__data.__writer, 0)) - return 0; - - lll_lock (rwlock->__data.__lock, rwlock->__data.__shared); - - if (rwlock->__data.__writer == 0 - && (rwlock->__data.__nr_writers_queued == 0 - || PTHREAD_RWLOCK_PREFER_READER_P (rwlock))) + /* For tryrdlock, we could speculate that we will succeed and go ahead and + register as a reader. However, if we misspeculate, we have to do the + same steps as a timed-out rdlock, which will increase contention. + Therefore, there is a trade-off between being able to use a combinable + read-modify-write operation and a CAS loop as used below; we pick the + latter because it simplifies the code, and should perform better when + tryrdlock is used in cases where writers are infrequent. + Because POSIX does not require a failed trylock to "synchronize memory", + relaxed MO is sufficient here and on the failure path of the CAS + below. */ + unsigned int r = atomic_load_relaxed (&rwlock->__data.__readers); + unsigned int rnew; + do { - if (__glibc_unlikely (++rwlock->__data.__nr_readers == 0)) + if ((r & PTHREAD_RWLOCK_WRPHASE) == 0) { - --rwlock->__data.__nr_readers; - result = EAGAIN; + /* If we are in a read phase, try to acquire unless there is a + primary writer and we prefer writers and there will be no + recursive read locks. */ + if (((r & PTHREAD_RWLOCK_WRLOCKED) != 0) + && (rwlock->__data.__flags + == PTHREAD_RWLOCK_PREFER_WRITER_NONRECURSIVE_NP)) + return EBUSY; + rnew = r + (1 << PTHREAD_RWLOCK_READER_SHIFT); } else { - result = 0; - /* See pthread_rwlock_rdlock. */ - if (rwlock->__data.__nr_readers == 1 - && rwlock->__data.__nr_readers_queued > 0 - && rwlock->__data.__nr_writers_queued > 0) + /* If there is a writer that has acquired the lock and we are in + a write phase, fail. */ + if ((r & PTHREAD_RWLOCK_WRLOCKED) != 0) + return EBUSY; + else { - ++rwlock->__data.__readers_wakeup; - wake = true; + /* If we do not care about potentially waiting writers, just + try to acquire. */ + rnew = (r + (1 << PTHREAD_RWLOCK_READER_SHIFT)) + ^ PTHREAD_RWLOCK_WRPHASE; } } + /* If we could have caused an overflow or take effect during an + overflow, we just can / need to return EAGAIN. There is no need to + have actually modified the number of readers because we could have + done that and cleaned up immediately. */ + if (rnew >= PTHREAD_RWLOCK_READER_OVERFLOW) + return EAGAIN; + } + /* If the CAS fails, we retry; this prevents that tryrdlock fails spuriously + (i.e., fails to acquire the lock although there is no writer), which is + fine for C++14 but not currently allowed by POSIX. + However, because tryrdlock must not appear to block, we should avoid + starving this CAS loop due to constant changes to __readers: + While normal rdlock readers that won't be able to acquire will just block + (and we expect timeouts on timedrdlock to be longer than one retry of the + CAS loop), we can have concurrently failing tryrdlock calls due to + readers or writers that acquire and release in the meantime. Using + randomized exponential back-off to make a live-lock unlikely should be + sufficient. + TODO Back-off. + Acquire MO so we synchronize with prior writers. */ + while (!atomic_compare_exchange_weak_acquire (&rwlock->__data.__readers, + &r, rnew)); + + if ((r & PTHREAD_RWLOCK_WRPHASE) != 0) + { + /* Same as in __pthread_rwlock_rdlock_full: + We started the read phase, so we are also responsible for + updating the write-phase futex. Relaxed MO is sufficient. + Note that there can be no other reader that we have to wake + because all other readers will see the read phase started by us + (or they will try to start it themselves); if a writer started + the read phase, we cannot have started it. Furthermore, we + cannot discard a PTHREAD_RWLOCK_FUTEX_USED flag because we will + overwrite the value set by the most recent writer (or the readers + before it in case of explicit hand-over) and we know that there + are no waiting readers. */ + atomic_store_relaxed (&rwlock->__data.__wrphase_futex, 0); } - lll_unlock (rwlock->__data.__lock, rwlock->__data.__shared); + return 0; - if (wake) - futex_wake (&rwlock->__data.__readers_wakeup, INT_MAX, futex_shared); - return result; } strong_alias (__pthread_rwlock_tryrdlock, pthread_rwlock_tryrdlock) diff --git a/nptl/pthread_rwlock_trywrlock.c b/nptl/pthread_rwlock_trywrlock.c index 251ece133f..0d9ccaf79c 100644 --- a/nptl/pthread_rwlock_trywrlock.c +++ b/nptl/pthread_rwlock_trywrlock.c @@ -18,31 +18,44 @@ #include #include "pthreadP.h" -#include -#include - +#include +/* See pthread_rwlock_common.c for an overview. */ int __pthread_rwlock_trywrlock (pthread_rwlock_t *rwlock) { - int result = EBUSY; - - if (ELIDE_TRYLOCK (rwlock->__data.__rwelision, - rwlock->__data.__lock == 0 - && rwlock->__data.__nr_readers == 0 - && rwlock->__data.__writer, 1)) - return 0; - - lll_lock (rwlock->__data.__lock, rwlock->__data.__shared); - - if (rwlock->__data.__writer == 0 && rwlock->__data.__nr_readers == 0) + /* When in a trywrlock, we can acquire the write lock if it is in states + #1 (idle and read phase) and #5 (idle and write phase), and also in #6 + (readers waiting, write phase) if we prefer writers. + If we observe any other state, we are allowed to fail and do not need to + "synchronize memory" as specified by POSIX (hence relaxed MO is + sufficient for the first load and the CAS failure path). + We face a similar issue as in tryrdlock in that we need to both avoid + live-locks / starvation and must not fail spuriously (see there for + further comments) -- and thus must loop until we get a definitive + observation or state change. */ + unsigned int r = atomic_load_relaxed (&rwlock->__data.__readers); + bool prefer_writer = + (rwlock->__data.__flags != PTHREAD_RWLOCK_PREFER_READER_NP); + while (((r & PTHREAD_RWLOCK_WRLOCKED) == 0) + && (((r >> PTHREAD_RWLOCK_READER_SHIFT) == 0) + || (prefer_writer && ((r & PTHREAD_RWLOCK_WRPHASE) != 0)))) { - rwlock->__data.__writer = THREAD_GETMEM (THREAD_SELF, tid); - result = 0; + /* Try to transition to states #7 or #8 (i.e., acquire the lock). */ + if (atomic_compare_exchange_weak_acquire ( + &rwlock->__data.__readers, &r, + r | PTHREAD_RWLOCK_WRPHASE | PTHREAD_RWLOCK_WRLOCKED)) + { + atomic_store_relaxed (&rwlock->__data.__writers_futex, 1); + atomic_store_relaxed (&rwlock->__data.__wrphase_futex, 1); + atomic_store_relaxed (&rwlock->__data.__cur_writer, + THREAD_GETMEM (THREAD_SELF, tid)); + return 0; + } + /* TODO Back-off. */ + /* See above. */ } - - lll_unlock (rwlock->__data.__lock, rwlock->__data.__shared); - - return result; + return EBUSY; } + strong_alias (__pthread_rwlock_trywrlock, pthread_rwlock_trywrlock) diff --git a/nptl/pthread_rwlock_unlock.c b/nptl/pthread_rwlock_unlock.c index 320837d5af..ef46e88263 100644 --- a/nptl/pthread_rwlock_unlock.c +++ b/nptl/pthread_rwlock_unlock.c @@ -18,60 +18,29 @@ #include #include -#include #include #include #include #include -#include +#include "pthread_rwlock_common.c" -/* Unlock RWLOCK. */ +/* See pthread_rwlock_common.c for an overview. */ int __pthread_rwlock_unlock (pthread_rwlock_t *rwlock) { - int futex_shared = - rwlock->__data.__shared == LLL_PRIVATE ? FUTEX_PRIVATE : FUTEX_SHARED; - LIBC_PROBE (rwlock_unlock, 1, rwlock); - /* Trying to elide an unlocked lock may crash the process. This - is expected and is compatible with POSIX.1-2008: "results are - undefined if the read-write lock rwlock is not held by the - calling thread". */ - if (ELIDE_UNLOCK (rwlock->__data.__writer == 0 - && rwlock->__data.__nr_readers == 0)) - return 0; - - lll_lock (rwlock->__data.__lock, rwlock->__data.__shared); - if (rwlock->__data.__writer) - rwlock->__data.__writer = 0; + /* We distinguish between having acquired a read vs. a write lock by looking + at the writer TID. If it's equal to our TID, we must be the writer + because nobody else can have stored this value. Also, if we are a + reader, we will read from the wrunlock store with value 0 by the most + recent writer because that writer happens-before us. */ + if (atomic_load_relaxed (&rwlock->__data.__cur_writer) + == THREAD_GETMEM (THREAD_SELF, tid)) + __pthread_rwlock_wrunlock (rwlock); else - --rwlock->__data.__nr_readers; - /* If there are still readers present, we do not yet need to wake writers - nor are responsible to wake any readers. */ - if (rwlock->__data.__nr_readers == 0) - { - /* Note that if there is a blocked writer, we effectively make it - responsible for waking any readers because we don't wake readers in - this case. */ - if (rwlock->__data.__nr_writers_queued) - { - ++rwlock->__data.__writer_wakeup; - lll_unlock (rwlock->__data.__lock, rwlock->__data.__shared); - futex_wake (&rwlock->__data.__writer_wakeup, 1, futex_shared); - return 0; - } - else if (rwlock->__data.__nr_readers_queued) - { - ++rwlock->__data.__readers_wakeup; - lll_unlock (rwlock->__data.__lock, rwlock->__data.__shared); - futex_wake (&rwlock->__data.__readers_wakeup, INT_MAX, - futex_shared); - return 0; - } - } - lll_unlock (rwlock->__data.__lock, rwlock->__data.__shared); + __pthread_rwlock_rdunlock (rwlock); return 0; } diff --git a/nptl/pthread_rwlock_wrlock.c b/nptl/pthread_rwlock_wrlock.c index 461ffdc06c..335fcd18cc 100644 --- a/nptl/pthread_rwlock_wrlock.c +++ b/nptl/pthread_rwlock_wrlock.c @@ -16,114 +16,18 @@ License along with the GNU C Library; if not, see . */ -#include -#include -#include -#include -#include -#include -#include -#include - - -/* Acquire write lock for RWLOCK. */ -static int __attribute__((noinline)) -__pthread_rwlock_wrlock_slow (pthread_rwlock_t *rwlock) -{ - int result = 0; - int futex_shared = - rwlock->__data.__shared == LLL_PRIVATE ? FUTEX_PRIVATE : FUTEX_SHARED; - - /* Caller has taken the lock. */ - - while (1) - { - /* Make sure we are not holding the rwlock as a writer. This is - a deadlock situation we recognize and report. */ - if (__builtin_expect (rwlock->__data.__writer - == THREAD_GETMEM (THREAD_SELF, tid), 0)) - { - result = EDEADLK; - break; - } - - /* Remember that we are a writer. */ - if (++rwlock->__data.__nr_writers_queued == 0) - { - /* Overflow on number of queued writers. */ - --rwlock->__data.__nr_writers_queued; - result = EAGAIN; - break; - } - - int waitval = rwlock->__data.__writer_wakeup; - - /* Free the lock. */ - lll_unlock (rwlock->__data.__lock, rwlock->__data.__shared); - - /* Wait for the writer or reader(s) to finish. We do not check the - return value because we decide how to continue based on the state of - the rwlock. */ - futex_wait_simple (&rwlock->__data.__writer_wakeup, waitval, - futex_shared); - - /* Get the lock. */ - lll_lock (rwlock->__data.__lock, rwlock->__data.__shared); - - /* To start over again, remove the thread from the writer list. */ - --rwlock->__data.__nr_writers_queued; - - /* Get the rwlock if there is no writer and no reader. */ - if (rwlock->__data.__writer == 0 && rwlock->__data.__nr_readers == 0) - { - /* Mark self as writer. */ - rwlock->__data.__writer = THREAD_GETMEM (THREAD_SELF, tid); - - LIBC_PROBE (wrlock_acquire_write, 1, rwlock); - break; - } - } - - /* We are done, free the lock. */ - lll_unlock (rwlock->__data.__lock, rwlock->__data.__shared); - - return result; -} - -/* Fast path of acquiring write lock for RWLOCK. */ +#include "pthread_rwlock_common.c" +/* See pthread_rwlock_common.c. */ int __pthread_rwlock_wrlock (pthread_rwlock_t *rwlock) { LIBC_PROBE (wrlock_entry, 1, rwlock); - if (ELIDE_LOCK (rwlock->__data.__rwelision, - rwlock->__data.__lock == 0 - && rwlock->__data.__writer == 0 - && rwlock->__data.__nr_readers == 0)) - return 0; - - /* Make sure we are alone. */ - lll_lock (rwlock->__data.__lock, rwlock->__data.__shared); - - /* Get the rwlock if there is no writer and no reader. */ - if (__glibc_likely((rwlock->__data.__writer | - rwlock->__data.__nr_readers) == 0)) - { - /* Mark self as writer. */ - rwlock->__data.__writer = THREAD_GETMEM (THREAD_SELF, tid); - - LIBC_PROBE (wrlock_acquire_write, 1, rwlock); - - /* We are done, free the lock. */ - lll_unlock (rwlock->__data.__lock, rwlock->__data.__shared); - - return 0; - } - - return __pthread_rwlock_wrlock_slow (rwlock); + int result = __pthread_rwlock_wrlock_full (rwlock, NULL); + LIBC_PROBE (wrlock_acquire_write, 1, rwlock); + return result; } - weak_alias (__pthread_rwlock_wrlock, pthread_rwlock_wrlock) hidden_def (__pthread_rwlock_wrlock) diff --git a/nptl/test-rwlock-printers.py b/nptl/test-rwlock-printers.py index d7d2abe525..c19c92d48f 100644 --- a/nptl/test-rwlock-printers.py +++ b/nptl/test-rwlock-printers.py @@ -35,9 +35,9 @@ try: break_at(test_source, 'Test locking (reader)') continue_cmd() # Go to test_locking_reader - test_printer(var, to_string, {'Status': 'Unlocked'}) + test_printer(var, to_string, {'Status': 'Not acquired'}) next_cmd() - test_printer(var, to_string, {'Status': r'Locked \(Read\)', 'Readers': '1'}) + test_printer(var, to_string, {'Status': r'Acquired \(Read\)', 'Readers': '1'}) next_cmd() test_printer(var, to_string, {'Readers': '2'}) next_cmd() @@ -45,10 +45,10 @@ try: break_at(test_source, 'Test locking (writer)') continue_cmd() # Go to test_locking_writer - test_printer(var, to_string, {'Status': 'Unlocked'}) + test_printer(var, to_string, {'Status': 'Not acquired'}) next_cmd() thread_id = get_current_thread_lwpid() - test_printer(var, to_string, {'Status': r'Locked \(Write\)', + test_printer(var, to_string, {'Status': r'Acquired \(Write\)', 'Writer ID': thread_id}) continue_cmd() # Exit diff --git a/nptl/test-rwlockattr-printers.c b/nptl/test-rwlockattr-printers.c index aeb6af6ca1..b2cfc26b9e 100644 --- a/nptl/test-rwlockattr-printers.c +++ b/nptl/test-rwlockattr-printers.c @@ -74,6 +74,8 @@ test_setkind_np (pthread_rwlock_t *rwlock, pthread_rwlockattr_t *attr) int result = FAIL; if (SET_KIND (attr, PTHREAD_RWLOCK_PREFER_READER_NP) == 0 /* Set kind. */ + && rwlock_reinit (rwlock, attr) == PASS + && SET_KIND (attr, PTHREAD_RWLOCK_PREFER_WRITER_NP) == 0 && rwlock_reinit (rwlock, attr) == PASS && SET_KIND (attr, PTHREAD_RWLOCK_PREFER_WRITER_NONRECURSIVE_NP) == 0 && rwlock_reinit (rwlock, attr) == PASS) diff --git a/nptl/test-rwlockattr-printers.py b/nptl/test-rwlockattr-printers.py index 9db3c25305..e62e5c533f 100644 --- a/nptl/test-rwlockattr-printers.py +++ b/nptl/test-rwlockattr-printers.py @@ -46,6 +46,9 @@ try: next_cmd(2) test_printer(rwlock_var, rwlock_to_string, {'Prefers': 'Writers'}) test_printer(attr_var, attr_to_string, {'Prefers': 'Writers'}) + next_cmd(2) + test_printer(rwlock_var, rwlock_to_string, {'Prefers': 'Writers no recursive readers'}) + test_printer(attr_var, attr_to_string, {'Prefers': 'Writers no recursive readers'}) break_at(test_source, 'Set shared') continue_cmd() # Go to test_setpshared diff --git a/nptl/tst-rwlock10.c b/nptl/tst-rwlock10.c index e2c47d39a2..0726458a19 100644 --- a/nptl/tst-rwlock10.c +++ b/nptl/tst-rwlock10.c @@ -16,5 +16,5 @@ License along with the GNU C Library; see the file COPYING.LIB. If not, see . */ -#define INIT PTHREAD_RWLOCK_INITIALIZER +#define KIND PTHREAD_RWLOCK_PREFER_READER_NP #include "tst-rwlock8.c" diff --git a/nptl/tst-rwlock11.c b/nptl/tst-rwlock11.c index 8d3456521f..bcd435803a 100644 --- a/nptl/tst-rwlock11.c +++ b/nptl/tst-rwlock11.c @@ -16,5 +16,5 @@ License along with the GNU C Library; see the file COPYING.LIB. If not, see . */ -#define INIT PTHREAD_RWLOCK_INITIALIZER +#define KIND PTHREAD_RWLOCK_PREFER_READER_NP #include "tst-rwlock9.c" diff --git a/nptl/tst-rwlock17.c b/nptl/tst-rwlock17.c new file mode 100644 index 0000000000..50c87e1f11 --- /dev/null +++ b/nptl/tst-rwlock17.c @@ -0,0 +1,19 @@ +/* Test program for timedout read/write lock functions. + Copyright (C) 2016-2017 Free Software Foundation, Inc. + + The GNU C Library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public License as + published by the Free Software Foundation; either version 2.1 of the + License, or (at your option) any later version. + + The GNU C Library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with the GNU C Library; see the file COPYING.LIB. If + not, see . */ + +#define KIND PTHREAD_RWLOCK_PREFER_WRITER_NP +#include "tst-rwlock8.c" diff --git a/nptl/tst-rwlock18.c b/nptl/tst-rwlock18.c new file mode 100644 index 0000000000..c07935c56e --- /dev/null +++ b/nptl/tst-rwlock18.c @@ -0,0 +1,19 @@ +/* Test program for timedout read/write lock functions. + Copyright (C) 2016-2017 Free Software Foundation, Inc. + + The GNU C Library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public License as + published by the Free Software Foundation; either version 2.1 of the + License, or (at your option) any later version. + + The GNU C Library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with the GNU C Library; see the file COPYING.LIB. If + not, see . */ + +#define KIND PTHREAD_RWLOCK_PREFER_WRITER_NP +#include "tst-rwlock9.c" diff --git a/nptl/tst-rwlock19.c b/nptl/tst-rwlock19.c new file mode 100644 index 0000000000..746d84d92f --- /dev/null +++ b/nptl/tst-rwlock19.c @@ -0,0 +1,127 @@ +/* Test rdlock overflow. + Copyright (C) 2000-2017 Free Software Foundation, Inc. + + The GNU C Library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public License as + published by the Free Software Foundation; either version 2.1 of the + License, or (at your option) any later version. + + The GNU C Library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with the GNU C Library; see the file COPYING.LIB. If + not, see . */ + +#include +#include +#include +#include +#include +#include +#include +#include + + +#define NREADERS 15 +#define READTRIES 5000 + +#define DELAY 1000000 + +static pthread_rwlock_t lock = PTHREAD_RWLOCK_INITIALIZER; +static int eagain_returned = 0; +static int success_returned = 0; + +static void * +reader_thread (void *nr) +{ + struct timespec delay; + int n; + + delay.tv_sec = 0; + delay.tv_nsec = DELAY; + + for (n = 0; n < READTRIES; ++n) + { + int err = pthread_rwlock_rdlock (&lock); + if (err == EAGAIN) + { + atomic_store_relaxed (&eagain_returned, 1); + continue; + } + else if (err == 0) + atomic_store_relaxed (&success_returned, 1); + else + { + puts ("rdlock failed"); + exit (1); + } + + nanosleep (&delay, NULL); + + if (pthread_rwlock_unlock (&lock) != 0) + { + puts ("unlock for reader failed"); + exit (1); + } + } + + return NULL; +} + + +static int +do_test (void) +{ + pthread_t thrd[NREADERS]; + int n; + void *res; + + /* Set the rwlock so that it's close to a reader overflow. + PTHREAD_RWLOCK_WRPHASE and PTHREAD_RWLOCK_WRLOCK are zero initially. */ + unsigned int readers = PTHREAD_RWLOCK_READER_OVERFLOW + - ((NREADERS / 3) << PTHREAD_RWLOCK_READER_SHIFT); + lock.__data.__readers = readers; + + for (n = 0; n < NREADERS; ++n) + if (pthread_create (&thrd[n], NULL, reader_thread, + (void *) (long int) n) != 0) + { + puts ("reader create failed"); + exit (1); + } + + /* Wait for all the threads. */ + for (n = 0; n < NREADERS; ++n) + if (pthread_join (thrd[n], &res) != 0) + { + puts ("reader join failed"); + exit (1); + } + + if (atomic_load_relaxed (&eagain_returned) == 0) + { + puts ("EAGAIN has never been returned"); + exit (1); + } + + if (atomic_load_relaxed (&success_returned) == 0) + { + puts ("rdlock was never successfully acquired"); + exit (1); + } + + if (lock.__data.__readers != readers) + { + puts ("__readers in rwlock differs from initial value"); + exit (1); + } + + return 0; +} + +#define TIMEOUT 30 +#define TEST_FUNCTION do_test () +#include "../test-skeleton.c" diff --git a/nptl/tst-rwlock2b.c b/nptl/tst-rwlock2b.c new file mode 100644 index 0000000000..5ebaa3a546 --- /dev/null +++ b/nptl/tst-rwlock2b.c @@ -0,0 +1,2 @@ +#define TYPE PTHREAD_RWLOCK_PREFER_WRITER_NP +#include "tst-rwlock2.c" diff --git a/nptl/tst-rwlock8.c b/nptl/tst-rwlock8.c index 9baecac877..5f3174d46a 100644 --- a/nptl/tst-rwlock8.c +++ b/nptl/tst-rwlock8.c @@ -32,11 +32,11 @@ #define DELAY 1000000 -#ifndef INIT -# define INIT PTHREAD_RWLOCK_WRITER_NONRECURSIVE_INITIALIZER_NP +#ifndef KIND +# define KIND PTHREAD_RWLOCK_PREFER_WRITER_NONRECURSIVE_NP #endif -static pthread_rwlock_t lock = INIT; +static pthread_rwlock_t lock; static void * @@ -118,6 +118,25 @@ do_test (void) pthread_t thrd[NREADERS]; int n; void *res; + pthread_rwlockattr_t a; + + if (pthread_rwlockattr_init (&a) != 0) + { + puts ("rwlockattr_t failed"); + exit (1); + } + + if (pthread_rwlockattr_setkind_np (&a, KIND) != 0) + { + puts ("rwlockattr_setkind failed"); + exit (1); + } + + if (pthread_rwlock_init (&lock, &a) != 0) + { + puts ("rwlock_init failed"); + exit (1); + } /* Make standard error the same as standard output. */ dup2 (1, 2); diff --git a/nptl/tst-rwlock9.c b/nptl/tst-rwlock9.c index ae2fd96bd2..a7ea34fae6 100644 --- a/nptl/tst-rwlock9.c +++ b/nptl/tst-rwlock9.c @@ -34,11 +34,11 @@ #define TIMEOUT 1000000 #define DELAY 1000000 -#ifndef INIT -# define INIT PTHREAD_RWLOCK_WRITER_NONRECURSIVE_INITIALIZER_NP +#ifndef KIND +# define KIND PTHREAD_RWLOCK_PREFER_WRITER_NONRECURSIVE_NP #endif -static pthread_rwlock_t lock = INIT; +static pthread_rwlock_t lock; static void * @@ -156,6 +156,25 @@ do_test (void) pthread_t thrd[NREADERS]; int n; void *res; + pthread_rwlockattr_t a; + + if (pthread_rwlockattr_init (&a) != 0) + { + puts ("rwlockattr_t failed"); + exit (1); + } + + if (pthread_rwlockattr_setkind_np (&a, KIND) != 0) + { + puts ("rwlockattr_setkind failed"); + exit (1); + } + + if (pthread_rwlock_init (&lock, &a) != 0) + { + puts ("rwlock_init failed"); + exit (1); + } /* Make standard error the same as standard output. */ dup2 (1, 2); diff --git a/sysdeps/aarch64/nptl/bits/pthreadtypes.h b/sysdeps/aarch64/nptl/bits/pthreadtypes.h index 76001d81c4..97d9407d00 100644 --- a/sysdeps/aarch64/nptl/bits/pthreadtypes.h +++ b/sysdeps/aarch64/nptl/bits/pthreadtypes.h @@ -154,13 +154,13 @@ typedef union { struct { - int __lock; - unsigned int __nr_readers; - unsigned int __readers_wakeup; - unsigned int __writer_wakeup; - unsigned int __nr_readers_queued; - unsigned int __nr_writers_queued; - int __writer; + unsigned int __readers; + unsigned int __writers; + unsigned int __wrphase_futex; + unsigned int __writers_futex; + unsigned int __pad3; + unsigned int __pad4; + int __cur_writer; int __shared; unsigned long int __pad1; unsigned long int __pad2; diff --git a/sysdeps/arm/nptl/bits/pthreadtypes.h b/sysdeps/arm/nptl/bits/pthreadtypes.h index 4bb08aaa35..dae7bc4f06 100644 --- a/sysdeps/arm/nptl/bits/pthreadtypes.h +++ b/sysdeps/arm/nptl/bits/pthreadtypes.h @@ -141,12 +141,12 @@ typedef union { struct { - int __lock; - unsigned int __nr_readers; - unsigned int __readers_wakeup; - unsigned int __writer_wakeup; - unsigned int __nr_readers_queued; - unsigned int __nr_writers_queued; + unsigned int __readers; + unsigned int __writers; + unsigned int __wrphase_futex; + unsigned int __writers_futex; + unsigned int __pad3; + unsigned int __pad4; #if __BYTE_ORDER == __BIG_ENDIAN unsigned char __pad1; unsigned char __pad2; @@ -162,7 +162,7 @@ typedef union unsigned char __pad1; unsigned char __pad2; #endif - int __writer; + int __cur_writer; } __data; char __size[__SIZEOF_PTHREAD_RWLOCK_T]; long int __align; diff --git a/sysdeps/hppa/nptl/bits/pthreadtypes.h b/sysdeps/hppa/nptl/bits/pthreadtypes.h index dd1f6e76db..e37111a2f3 100644 --- a/sysdeps/hppa/nptl/bits/pthreadtypes.h +++ b/sysdeps/hppa/nptl/bits/pthreadtypes.h @@ -168,13 +168,13 @@ typedef union next four words are all set to 1 by the Linuxthreads PTHREAD_RWLOCK_INITIALIZER. We ignore them in NPTL. */ int __compat_padding[4] __attribute__ ((__aligned__(16))); - int __lock; - unsigned int __nr_readers; - unsigned int __readers_wakeup; - unsigned int __writer_wakeup; - unsigned int __nr_readers_queued; - unsigned int __nr_writers_queued; - int __writer; + unsigned int __readers; + unsigned int __writers; + unsigned int __wrphase_futex; + unsigned int __writers_futex; + unsigned int __pad3; + unsigned int __pad4; + int __cur_writer; /* An unused word, reserved for future use. It was added to maintain the location of the flags from the Linuxthreads layout of this structure. */ diff --git a/sysdeps/ia64/nptl/bits/pthreadtypes.h b/sysdeps/ia64/nptl/bits/pthreadtypes.h index 287de1ede7..c67ee862e2 100644 --- a/sysdeps/ia64/nptl/bits/pthreadtypes.h +++ b/sysdeps/ia64/nptl/bits/pthreadtypes.h @@ -138,13 +138,13 @@ typedef union { struct { - int __lock; - unsigned int __nr_readers; - unsigned int __readers_wakeup; - unsigned int __writer_wakeup; - unsigned int __nr_readers_queued; - unsigned int __nr_writers_queued; - int __writer; + unsigned int __readers; + unsigned int __writers; + unsigned int __wrphase_futex; + unsigned int __writers_futex; + unsigned int __pad3; + unsigned int __pad4; + int __cur_writer; int __shared; unsigned long int __pad1; unsigned long int __pad2; diff --git a/sysdeps/m68k/nptl/bits/pthreadtypes.h b/sysdeps/m68k/nptl/bits/pthreadtypes.h index bd89e20398..9a16bbfaf1 100644 --- a/sysdeps/m68k/nptl/bits/pthreadtypes.h +++ b/sysdeps/m68k/nptl/bits/pthreadtypes.h @@ -142,19 +142,19 @@ typedef union { struct { - int __lock __attribute__ ((__aligned__ (4))); - unsigned int __nr_readers; - unsigned int __readers_wakeup; - unsigned int __writer_wakeup; - unsigned int __nr_readers_queued; - unsigned int __nr_writers_queued; + unsigned int __readers __attribute__ ((__aligned__ (4))); + unsigned int __writers; + unsigned int __wrphase_futex; + unsigned int __writers_futex; + unsigned int __pad3; + unsigned int __pad4; unsigned char __pad1; unsigned char __pad2; unsigned char __shared; /* FLAGS must stay at this position in the structure to maintain binary compatibility. */ unsigned char __flags; - int __writer; + int __cur_writer; } __data; char __size[__SIZEOF_PTHREAD_RWLOCK_T]; long int __align; diff --git a/sysdeps/microblaze/nptl/bits/pthreadtypes.h b/sysdeps/microblaze/nptl/bits/pthreadtypes.h index 7535ce865e..7c5db6b5c7 100644 --- a/sysdeps/microblaze/nptl/bits/pthreadtypes.h +++ b/sysdeps/microblaze/nptl/bits/pthreadtypes.h @@ -136,12 +136,12 @@ typedef union { struct { - int __lock; - unsigned int __nr_readers; - unsigned int __readers_wakeup; - unsigned int __writer_wakeup; - unsigned int __nr_readers_queued; - unsigned int __nr_writers_queued; + unsigned int __readers; + unsigned int __writers; + unsigned int __wrphase_futex; + unsigned int __writers_futex; + unsigned int __pad3; + unsigned int __pad4; # if __BYTE_ORDER == __BIG_ENDIAN unsigned char __pad1; unsigned char __pad2; @@ -157,7 +157,7 @@ typedef union unsigned char __pad1; unsigned char __pad2; # endif - int __writer; + int __cur_writer; } __data; char __size[__SIZEOF_PTHREAD_RWLOCK_T]; long int __align; diff --git a/sysdeps/mips/nptl/bits/pthreadtypes.h b/sysdeps/mips/nptl/bits/pthreadtypes.h index cca72abc29..b1ebf4ec95 100644 --- a/sysdeps/mips/nptl/bits/pthreadtypes.h +++ b/sysdeps/mips/nptl/bits/pthreadtypes.h @@ -171,13 +171,13 @@ typedef union # if _MIPS_SIM == _ABI64 struct { - int __lock; - unsigned int __nr_readers; - unsigned int __readers_wakeup; - unsigned int __writer_wakeup; - unsigned int __nr_readers_queued; - unsigned int __nr_writers_queued; - int __writer; + unsigned int __readers; + unsigned int __writers; + unsigned int __wrphase_futex; + unsigned int __writers_futex; + unsigned int __pad3; + unsigned int __pad4; + int __cur_writer; int __shared; unsigned long int __pad1; unsigned long int __pad2; @@ -188,12 +188,12 @@ typedef union # else struct { - int __lock; - unsigned int __nr_readers; - unsigned int __readers_wakeup; - unsigned int __writer_wakeup; - unsigned int __nr_readers_queued; - unsigned int __nr_writers_queued; + unsigned int __readers; + unsigned int __writers; + unsigned int __wrphase_futex; + unsigned int __writers_futex; + unsigned int __pad3; + unsigned int __pad4; #if __BYTE_ORDER == __BIG_ENDIAN unsigned char __pad1; unsigned char __pad2; @@ -209,7 +209,7 @@ typedef union unsigned char __pad1; unsigned char __pad2; #endif - int __writer; + int __cur_writer; } __data; # endif char __size[__SIZEOF_PTHREAD_RWLOCK_T]; diff --git a/sysdeps/nios2/nptl/bits/pthreadtypes.h b/sysdeps/nios2/nptl/bits/pthreadtypes.h index 795d26c226..8247013b9e 100644 --- a/sysdeps/nios2/nptl/bits/pthreadtypes.h +++ b/sysdeps/nios2/nptl/bits/pthreadtypes.h @@ -141,12 +141,12 @@ typedef union { struct { - int __lock; - unsigned int __nr_readers; - unsigned int __readers_wakeup; - unsigned int __writer_wakeup; - unsigned int __nr_readers_queued; - unsigned int __nr_writers_queued; + unsigned int __readers; + unsigned int __writers; + unsigned int __wrphase_futex; + unsigned int __writers_futex; + unsigned int __pad3; + unsigned int __pad4; #if __BYTE_ORDER == __BIG_ENDIAN unsigned char __pad1; unsigned char __pad2; @@ -162,7 +162,7 @@ typedef union unsigned char __pad1; unsigned char __pad2; #endif - int __writer; + int __cur_writer; } __data; char __size[__SIZEOF_PTHREAD_RWLOCK_T]; long int __align; diff --git a/sysdeps/s390/nptl/bits/pthreadtypes.h b/sysdeps/s390/nptl/bits/pthreadtypes.h index ad0a6d8010..48ffdb447b 100644 --- a/sysdeps/s390/nptl/bits/pthreadtypes.h +++ b/sysdeps/s390/nptl/bits/pthreadtypes.h @@ -191,13 +191,13 @@ typedef union # if __WORDSIZE == 64 struct { - int __lock; - unsigned int __nr_readers; - unsigned int __readers_wakeup; - unsigned int __writer_wakeup; - unsigned int __nr_readers_queued; - unsigned int __nr_writers_queued; - int __writer; + unsigned int __readers; + unsigned int __writers; + unsigned int __wrphase_futex; + unsigned int __writers_futex; + unsigned int __pad3; + unsigned int __pad4; + int __cur_writer; int __shared; unsigned long int __pad1; unsigned long int __pad2; @@ -208,19 +208,19 @@ typedef union # else struct { - int __lock; - unsigned int __nr_readers; - unsigned int __readers_wakeup; - unsigned int __writer_wakeup; - unsigned int __nr_readers_queued; - unsigned int __nr_writers_queued; + unsigned int __readers; + unsigned int __writers; + unsigned int __wrphase_futex; + unsigned int __writers_futex; + unsigned int __pad3; + unsigned int __pad4; unsigned char __pad1; unsigned char __pad2; unsigned char __shared; /* FLAGS must stay at this position in the structure to maintain binary compatibility. */ unsigned char __flags; - int __writer; + int __cur_writer; } __data; # endif char __size[__SIZEOF_PTHREAD_RWLOCK_T]; diff --git a/sysdeps/sh/nptl/bits/pthreadtypes.h b/sysdeps/sh/nptl/bits/pthreadtypes.h index d2e6d832bb..eec58118bd 100644 --- a/sysdeps/sh/nptl/bits/pthreadtypes.h +++ b/sysdeps/sh/nptl/bits/pthreadtypes.h @@ -141,12 +141,12 @@ typedef union { struct { - int __lock; - unsigned int __nr_readers; - unsigned int __readers_wakeup; - unsigned int __writer_wakeup; - unsigned int __nr_readers_queued; - unsigned int __nr_writers_queued; + unsigned int __readers; + unsigned int __writers; + unsigned int __wrphase_futex; + unsigned int __writers_futex; + unsigned int __pad3; + unsigned int __pad4; #if __BYTE_ORDER == __BIG_ENDIAN unsigned char __pad1; unsigned char __pad2; @@ -162,7 +162,7 @@ typedef union unsigned char __pad1; unsigned char __pad2; #endif - pthread_t __writer; + pthread_t __cur_writer; } __data; char __size[__SIZEOF_PTHREAD_RWLOCK_T]; long int __align; diff --git a/sysdeps/sparc/nptl/bits/pthreadtypes.h b/sysdeps/sparc/nptl/bits/pthreadtypes.h index 5685d950e5..525988c742 100644 --- a/sysdeps/sparc/nptl/bits/pthreadtypes.h +++ b/sysdeps/sparc/nptl/bits/pthreadtypes.h @@ -171,13 +171,13 @@ typedef union # if __WORDSIZE == 64 struct { - int __lock; - unsigned int __nr_readers; - unsigned int __readers_wakeup; - unsigned int __writer_wakeup; - unsigned int __nr_readers_queued; - unsigned int __nr_writers_queued; - int __writer; + unsigned int __readers; + unsigned int __writers; + unsigned int __wrphase_futex; + unsigned int __writers_futex; + unsigned int __pad3; + unsigned int __pad4; + int __cur_writer; int __shared; unsigned long int __pad1; unsigned long int __pad2; @@ -188,19 +188,19 @@ typedef union # else struct { - int __lock; - unsigned int __nr_readers; - unsigned int __readers_wakeup; - unsigned int __writer_wakeup; - unsigned int __nr_readers_queued; - unsigned int __nr_writers_queued; + unsigned int __readers; + unsigned int __writers; + unsigned int __wrphase_futex; + unsigned int __writers_futex; + unsigned int __pad3; + unsigned int __pad4; unsigned char __pad1; unsigned char __pad2; unsigned char __shared; /* FLAGS must stay at this position in the structure to maintain binary compatibility. */ unsigned char __flags; - int __writer; + int __cur_writer; } __data; # endif char __size[__SIZEOF_PTHREAD_RWLOCK_T]; diff --git a/sysdeps/tile/nptl/bits/pthreadtypes.h b/sysdeps/tile/nptl/bits/pthreadtypes.h index bba4aec8a4..1632d82cf3 100644 --- a/sysdeps/tile/nptl/bits/pthreadtypes.h +++ b/sysdeps/tile/nptl/bits/pthreadtypes.h @@ -171,13 +171,13 @@ typedef union # if __WORDSIZE == 64 struct { - int __lock; - unsigned int __nr_readers; - unsigned int __readers_wakeup; - unsigned int __writer_wakeup; - unsigned int __nr_readers_queued; - unsigned int __nr_writers_queued; - int __writer; + unsigned int __readers; + unsigned int __writers; + unsigned int __wrphase_futex; + unsigned int __writers_futex; + unsigned int __pad3; + unsigned int __pad4; + int __cur_writer; int __shared; unsigned long int __pad1; unsigned long int __pad2; @@ -188,19 +188,19 @@ typedef union # else struct { - int __lock; - unsigned int __nr_readers; - unsigned int __readers_wakeup; - unsigned int __writer_wakeup; - unsigned int __nr_readers_queued; - unsigned int __nr_writers_queued; + unsigned int __readers; + unsigned int __writers; + unsigned int __wrphase_futex; + unsigned int __writers_futex; + unsigned int __pad3; + unsigned int __pad4; /* FLAGS must stay at this position in the structure to maintain binary compatibility. */ unsigned char __flags; unsigned char __shared; unsigned char __pad1; unsigned char __pad2; - int __writer; + int __cur_writer; } __data; # endif char __size[__SIZEOF_PTHREAD_RWLOCK_T]; diff --git a/sysdeps/unix/sysv/linux/alpha/bits/pthreadtypes.h b/sysdeps/unix/sysv/linux/alpha/bits/pthreadtypes.h index 8023bd012c..1beaf109a8 100644 --- a/sysdeps/unix/sysv/linux/alpha/bits/pthreadtypes.h +++ b/sysdeps/unix/sysv/linux/alpha/bits/pthreadtypes.h @@ -137,13 +137,13 @@ typedef union { struct { - int __lock; - unsigned int __nr_readers; - unsigned int __readers_wakeup; - unsigned int __writer_wakeup; - unsigned int __nr_readers_queued; - unsigned int __nr_writers_queued; - int __writer; + unsigned int __readers; + unsigned int __writers; + unsigned int __wrphase_futex; + unsigned int __writers_futex; + unsigned int __pad3; + unsigned int __pad4; + int __cur_writer; int __shared; unsigned long int __pad1; unsigned long int __pad2; diff --git a/sysdeps/unix/sysv/linux/powerpc/bits/pthreadtypes.h b/sysdeps/unix/sysv/linux/powerpc/bits/pthreadtypes.h index 251cec6de5..e5cda79ad2 100644 --- a/sysdeps/unix/sysv/linux/powerpc/bits/pthreadtypes.h +++ b/sysdeps/unix/sysv/linux/powerpc/bits/pthreadtypes.h @@ -177,13 +177,13 @@ typedef union # if __WORDSIZE == 64 struct { - int __lock; - unsigned int __nr_readers; - unsigned int __readers_wakeup; - unsigned int __writer_wakeup; - unsigned int __nr_readers_queued; - unsigned int __nr_writers_queued; - int __writer; + unsigned int __readers; + unsigned int __writers; + unsigned int __wrphase_futex; + unsigned int __writers_futex; + unsigned int __pad3; + unsigned int __pad4; + int __cur_writer; int __shared; unsigned char __rwelision; unsigned char __pad1[7]; @@ -196,19 +196,19 @@ typedef union # else struct { - int __lock; - unsigned int __nr_readers; - unsigned int __readers_wakeup; - unsigned int __writer_wakeup; - unsigned int __nr_readers_queued; - unsigned int __nr_writers_queued; + unsigned int __readers; + unsigned int __writers; + unsigned int __wrphase_futex; + unsigned int __writers_futex; + unsigned int __pad3; + unsigned int __pad4; unsigned char __rwelision; unsigned char __pad2; unsigned char __shared; /* FLAGS must stay at this position in the structure to maintain binary compatibility. */ unsigned char __flags; - int __writer; + int __cur_writer; #define __PTHREAD_RWLOCK_ELISION_EXTRA 0 } __data; # endif diff --git a/sysdeps/x86/bits/pthreadtypes.h b/sysdeps/x86/bits/pthreadtypes.h index bc7f68bfdf..c3055cac7f 100644 --- a/sysdeps/x86/bits/pthreadtypes.h +++ b/sysdeps/x86/bits/pthreadtypes.h @@ -189,13 +189,13 @@ typedef union # ifdef __x86_64__ struct { - int __lock; - unsigned int __nr_readers; - unsigned int __readers_wakeup; - unsigned int __writer_wakeup; - unsigned int __nr_readers_queued; - unsigned int __nr_writers_queued; - int __writer; + unsigned int __readers; + unsigned int __writers; + unsigned int __wrphase_futex; + unsigned int __writers_futex; + unsigned int __pad3; + unsigned int __pad4; + int __cur_writer; int __shared; signed char __rwelision; # ifdef __ILP32__ @@ -214,12 +214,12 @@ typedef union # else struct { - int __lock; - unsigned int __nr_readers; - unsigned int __readers_wakeup; - unsigned int __writer_wakeup; - unsigned int __nr_readers_queued; - unsigned int __nr_writers_queued; + unsigned int __readers; + unsigned int __writers; + unsigned int __wrphase_futex; + unsigned int __writers_futex; + unsigned int __pad3; + unsigned int __pad4; /* FLAGS must stay at this position in the structure to maintain binary compatibility. */ unsigned char __flags; @@ -227,7 +227,7 @@ typedef union signed char __rwelision; # define __PTHREAD_RWLOCK_ELISION_EXTRA 0 unsigned char __pad2; - int __writer; + int __cur_writer; } __data; # endif char __size[__SIZEOF_PTHREAD_RWLOCK_T];