Even though building glibc with 64 bit time_t flags is not supported,
and the usual way is to patch the build system to avoid it; some
systems do enable it by default, and it increases the requirements
to build glibc in such cases (it also does not help newcomers when
trying to build glibc).
The conform namespace and linknamespace tests also do not expect
that flag to be set by default, so disable it as well.
Checked with a build/check for major ABI and some (i386, arm,
mipsel, hppa) with a toolchain that has LFS flags by default.
Reviewed-by: DJ Delorie <dj@redhat.com>
Even though building glibc with LFS flags is not supported, and the
the usual way is to patch the build system to avoid it [1]; some system
do enable it by default, and it increases the requirements to build
glibc in such cases (it also does not help newcomers when trying
to build glibc).
The conform namespace and linknamespace tests also do not expect
that flag to be set by default, so disable it as well.
Checked with a build/check for major ABI and some (i386, arm,
mipsel, hppa) with a toolchain that has LFS flags by default.
[1] https://sourceware.org/bugzilla/show_bug.cgi?id=31624
Reviewed-by: DJ Delorie <dj@redhat.com>
Sort tunables list at the time it's generated. Note: adding new
tunables will cause other tunable IDs to change, but that was
the case before anyway. POSIX does not guarantee the order of "foo
in bar" AWK operators, so the order was indeterminate before anyway.
Even depending on the order to be the same across multiple calls,
such as in this script, is undefined, so sorting the list resolves
that also.
Note that sorting is not dependent on the user's locale.
It basically copy the already in place rules for dynamic tests for
auto-generated math functions for all support types. To avoid the
need to duplicate .inc files, a .SECONDEXPANSION rules is adeed for
the gen-libm-test.py generation.
New tests are added on the new rules 'libm-test-funcs-auto-static',
'libm-test-funcs-noauto-static', and 'libm-test-funcs-narrow-static';
similar to the non-static counterparts.
To avoid add extra build and disk requirement, the new math static
tests are only enable with a new define 'build-math-static-tests'.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Rounding intrinsics may not be inlined without
-fno-math-errno. libmvec is free to do what it
likes with errno, so disable it for better
performance.
Tested with no regression on aarch64 and x86_64.
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
On Fedora 40/x86-64, linker enables --enable-new-dtags by default which
generates DT_RUNPATH instead of DT_RPATH. Unlike DT_RPATH, DT_RUNPATH
only applies to DT_NEEDED entries in the executable and doesn't applies
to DT_NEEDED entries in shared libraries which are loaded via DT_NEEDED
entries in the executable. Some glibc tests have libstdc++.so.6 in
DT_NEEDED, which has libm.so.6 in DT_NEEDED. When DT_RUNPATH is generated,
/lib64/libm.so.6 is loaded for such tests. If the newly built glibc is
older than glibc 2.36, these tests fail with
assert/tst-assert-c++: /export/build/gnu/tools-build/glibc-gitlab-release/build-x86_64-linux/libc.so.6: version `GLIBC_2.36' not found (required by /lib64/libm.so.6)
assert/tst-assert-c++: /export/build/gnu/tools-build/glibc-gitlab-release/build-x86_64-linux/libc.so.6: version `GLIBC_ABI_DT_RELR' not found (required by /lib64/libm.so.6)
Pass -Wl,--disable-new-dtags to linker when building glibc tests with
--enable-hardcoded-path-in-tests. This fixes BZ #31719.
Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
Starting from glibc 2.1, crt1.o contains _IO_stdin_used which is checked
by _IO_check_libio to provide binary compatibility for glibc 2.0. Add
crt1-2.0.o for tests against glibc 2.0. Define tests-2.0 for glibc 2.0
compatibility tests. Add and update glibc 2.0 compatibility tests for
stderr, matherr and pthread_kill.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
When static PIE is enabled by default, we shouldn't use crtbeginS.o and
crtendS.o for non-PIE static executables. Check $($(@F)-no-pie) to use
crtbeginT.o and crtend.o to create non-PIE static executables.
Reviewed-by: Sunil K Pandey <skpgkp2@gmail.com>
All the crypt related functions, cryptographic algorithms, and
make requirements are removed, with only the exception of md5
implementation which is moved to locale folder since it is
required by localedef for integrity protection (libc's
locale-reading code does not check these, but localedef does
generate them).
Besides thec code itself, both internal documentation and the
manual is also adjusted. This allows to remove both --enable-crypt
and --enable-nss-crypt configure options.
Checked with a build for all affected ABIs.
Co-authored-by: Zack Weinberg <zack@owlfolio.org>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The majority of shadow routines are entry points for nss functionality.
This commit removes the 'shadow' subdirectory and moves all
functionality and tests to 'nss'. References to shadow/ are accordingly
changed.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The majority of pwd routines are entry points for nss functionality.
This commit removes the 'pwd' subdirectory and moves all functionality
and tests to 'nss'. References to pwd/ are accordingly changed.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The majority of gshadow routines are entry points for nss functionality.
This commit removes the 'gshadow' subdirectory and moves all
functionality and tests to 'nss'. References to gshadow/ are
accordingly changed.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The majority of grp routines are entry points for nss functionality.
This commit removes the 'grp' subdirectory and moves all nss-relevant
functionality and all tests to 'nss', and the 'setgroups' stub into
'posix' (alongside the 'getgroups' stub). References to grp/ are
accordingly changed. In addition, compat-initgroups.c, a fallback
implementation of initgroups is renamed to initgroups-fallback.c so that
the build system does not confuse it for nss_compat/compat-initgroups.c.
Build time improves very slightly; e.g. down from an average of 45.5s to
44.5s on an 8-thread mobile x86_64 CPU.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Commit 78ceef25d6 ("configure: Remove
--enable-all-warnings option") removed it due to a missing +.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
The option is not activelly tested and has bitrotten, to fix it
would require a lot of work and multiple fixes. A better option
would to evaluate each option and enable the warning if it makes
sense.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Add --enable-fortify-source option.
It is now possible to enable fortification through a configure option.
The level may be given as parameter, if none is provided, the configure
script will determine what is the highest level possible that can be set
considering GCC built-ins availability and set it.
If level is explicitly set to 3, configure checks if the compiler
supports the built-in function necessary for it or raise an error if it
isn't.
If the configure option isn't explicitly enabled, it _FORTIFY_SOURCE is
forcibly undefined (and therefore disabled).
The result of the configure checks are new variables, ${fortify_source}
and ${no_fortify_source} that can be used to appropriately populate
CFLAGS.
A dedicated patch will follow to make use of this variable in Makefiles
when necessary.
Updated NEWS and INSTALL.
Adding dedicated x86_64 variant that enables the configuration.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
And make always supported. The configure option was added on glibc 2.25
and some features require it (such as hwcap mask, huge pages support, and
lock elisition tuning). It also simplifies the build permutations.
Changes from v1:
* Remove glibc.rtld.dynamic_sort changes, it is orthogonal and needs
more discussion.
* Cleanup more code.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
make-4.4 will add long flags to MAKEFLAGS variable:
* WARNING: Backward-incompatibility!
Previously only simple (one-letter) options were added to the MAKEFLAGS
variable that was visible while parsing makefiles. Now, all options
are available in MAKEFLAGS.
This causes locale builds to fail when long options are used:
$ make --shuffle
...
make -C localedata install-locales
make: invalid shuffle mode: '1662724426r'
The change fixes it by passing eash option via whitespace and dashes.
That way option is appended to both single-word form and whitespace
separated form.
While at it fixed --silent mode detection in $(MAKEFLAGS) by filtering
out --long-options. Otherwise options like --shuffle flag enable silent
mode unintentionally. $(silent-make) variable consolidates the checks.
Resolves: BZ# 29564
CC: Paul Smith <psmith@gnu.org>
CC: Siddhesh Poyarekar <siddhesh@gotplt.org>
Signed-off-by: Sergei Trofimovich <slyich@gmail.com>
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
We should default to the larger code model, in order to support
larger applications built with -static -pie. This should be
consistent with pic-ccflag, which defaults to -fPIC.
Remove the now redundant override from sysdeps/sparc/Makefile.
Note that -fno-pie and -fno-PIE have the same effect.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
The errlist.c is built with -fno-toplevel-reorder to avoid compiler to
reorder the compat assembly directives due an assembler issue [1]
(fixed on 2.39).
This patch removes the compiler flags by split the compat symbol
generation in two phases. First the _sys_errlist_internal internal
without any compat symbol directive is preprocessed to generate an
assembly source code. This generate assembly is then used as input
on a platform agnostic errlist-data.S which then creates the compat
definitions. This prevents compiler to move any compat directive
prior the _sys_errlist_internal definition itself.
Checked on a make check run-built-tests=no on all affected ABIs.
[1] https://sourceware.org/bugzilla/show_bug.cgi?id=29012
The comment indicates that --hash-style=both was used to maintain
compatibility with static dlopen, but we had many internal ABI
changes since then, so this compatiblity does not add value anymore.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
-z combreloc has been the default regadless of the architecture since
binutils commit f4d733664aabd7bd78c82895e030ec9779a92809 (2002). The
configure check added in commit fdde83499a (2001) has long been
unneeded.
We can therefore treat HAVE_Z_COMBRELOC as always 1 and delete dead code
paths in dl-machine.h files (many were copied from commit a711b01d34
and ee0cb67ec2).
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
DT_RUNPATH is only used to find the immediate dependencies of the
executable or shared object containing the DT_RUNPATH entry:
1. Define link-test-modules-rpath-link if $(build-hardcoded-path-in-tests)
is yes.
2. Use $(link-test-modules-rpath-link) in build-module-helper so that
test modules can dlopen modules with DT_RUNPATH.
3. Add a test to show why link-test-modules-rpath-link is needed.
This partially fixes BZ #28455.
The file can be used to check the effect of the default compiler
flags on code generation even in areas of the build that uses
non-default compiler flags.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
It is not used to build installed programs. It also fixes
resolv/tst-p_secstodate on big endian machines.
Checked on i686-linux-gnu and powerpc-linux-gnu-power4.
I used these shell commands:
../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")
and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 7061 files FOO.
I then removed trailing white space from math/tgmath.h,
support/tst-support-open-dev-null-range.c, and
sysdeps/x86_64/multiarch/strlen-vec.S, to work around the following
obscure pre-commit check failure diagnostics from Savannah. I don't
know why I run into these diagnostics whereas others evidently do not.
remote: *** 912-#endif
remote: *** 913:
remote: *** 914-
remote: *** error: lines with trailing whitespace found
...
remote: *** error: sysdeps/unix/sysv/linux/statx_cp.c: trailing lines
I (and maybe one or two others) added a (C) to the copyright notice
regardless of the contribution checklist[1] not mentioning it. Fix all
these instances so that the notice reads as "Copyright The GNU Toolchain
Authors" across the source code.
[1] https://sourceware.org/glibc/wiki/Contribution%20checklist
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Build glibc programs and tests as PIE by default and enable static-pie
automatically if the architecture and toolchain supports it.
Also add a new configuration option --disable-default-pie to prevent
building programs as PIE.
Only the following architectures now have PIE disabled by default
because they do not work at the moment. hppa, ia64, alpha and csky
don't work because the linker is unable to handle a pcrel relocation
generated from PIE objects. The microblaze compiler is currently
failing with an ICE. GNU hurd tries to enable static-pie, which does
not work and hence fails. All these targets have default PIE disabled
at the moment and I have left it to the target maintainers to enable PIE
on their targets.
build-many-glibcs runs clean for all targets. I also tested x86_64 on
Fedora and Ubuntu, to verify that the default build as well as
--disable-default-pie work as expected with both system toolchains.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Since
commit d73f5331ce
Author: Roland McGrath <roland@gnu.org>
Date: Fri May 2 02:20:45 2003 +0000
2003-05-01 Roland McGrath <roland@redhat.com>
dependency is generated by passing -MD -MF to compiler. Remove the unused
+mkdep, +make-deps, s-proto.S and s-proto-cancel.S.
This fixes BZ #28554.
Although the conform/ header tests are built using the headers of the
glibc under test, the execution tests from conformtest (a few tests of
the values of macros evaluating to string constants) are linked and
run with system libc, not the newly built libc.
Apart from preventing testing in cross environments, this can be a
problem even for native testing. Specifically, it can be useful to do
native testing when building with a cross compiler that links with a
libc that is not the system libc; for example, on x86_64, you can test
all three ABIs that way if the kernel support is present, even if the
host OS lacks 32-bit or x32 libraries or they are older than the
libraries in the sysroot used by the compiler used to build glibc.
This works for almost all tests, but not for these conformtest tests.
Arrange for conformtest to link and run test programs similarly to
other tests, with consequent refactoring of various variables in
Makeconfig to allow passing relevant parts of the link-time command
lines down to conformtest. In general, the parts of the link command
involving $@ or $^ are separated out from the parts that should be
passed to conformtest (the variables passed to conformtest still
involve various variables whose names involve $(@F), but those
variables simply won't be defined for the conformtest makefile rules
and I think their presence there is harmless).
This is also most of the support that would be needed to allow running
those tests of string constants for cross testing when test-wrapper is
defined. That will also need changes to where conformtest.py puts the
test executables, so it puts them in the main object directory
(expected to be shared with a test system in cross testing) rather
than /tmp (not expected to be shared) as at present.
Tested for x86_64.
As a result, is not necessary to specify __attribute__ ((nocommon))
on individual definitions.
GCC 10 defaults to -fno-common on all architectures except ARC,
but this change is compatible with older GCC versions and ARC, too.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The symbols gai_cancel, gai_error, gai_suspend, getaddrinfo_a,
__gai_suspend_time64 were moved using scripts/move-symbol-to-libc.py.
For Hurd (which remains !PTHREAD_IN_LIBC), a few #define redirects
had to be added because several pthread functions are not available
under __. (Linux uses __ prefixes for most hidden aliases, and has
to in some cases to avoid linknamespace issues.)
The variable name was incorrect, and the existing librt-routines
variable needs to be augmented (not assigned) in rt/Makefile.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The time64-compat.i needed for the time64-compat.mk Makeconfig include
ends up trying to include libc-modules.h, which is not generated until
later. This results in an error during build which is not noticed
because it somehow does not terminate the build.
Exclude the modules cppflags from the pre-processing command and fix
up the time64-compat.mk target so that the build runs without issues.
Reviewed-by: Andreas Schwab <schwab@linux-m68k.org>
This commit removes the ELF constructor and internal variables from
dlfcn/dlfcn.c. The file now serves the same purpose as
nptl/libpthread-compat.c, so it is renamed to dlfcn/libdl-compat.c.
The use of libdl-shared-only-routines ensures that libdl.a is empty.
This commit adjusts the test suite not to use $(libdl). The libdl.so
symbolic link is no longer installed.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
These make variables can be used to add routines to different
libraries for the Hurd and Linux builds.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
This does not change the emitted code since __libc_start_main does not
return, but is important for formal flags compliance.
This also cleans up the cosmetic inconsistency in the stack protector
flags in csu, especially the incorrect value of STACK_PROTECTOR_LEVEL.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
I used these shell commands:
../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")
and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 6694 files FOO.
I then removed trailing white space from benchtests/bench-pthread-locks.c
and iconvdata/tst-iconv-big5-hkscs-to-2ucs4.c, to work around this
diagnostic from Savannah:
remote: *** pre-commit check failed ...
remote: *** error: lines with trailing whitespace found
remote: error: hook declined to update refs/heads/master
On GNU/Hurd we not only need $(common-objpfx) in LD_LIBRARY_PATH when loading
dynamic objects, but also $(common-objpfx)/mach and $(common-objpfx)/hurd. This
adds an ld-library-path variable to be used as LD_LIBRARY_PATH basis in
Makefiles, and a sysdep-ld-library-path variable for sysdeps to add some
more paths, here mach/ and hurd/.
Being not familiar with the glibc repository, I typed "make" inside some
subdirectory that has a Makefile, and was met with:
$ make
../Makeconfig:42: *** missing separator. Stop.
At Makeconfig:42, we have:
objdir must be defined by the build-directory Makefile.
Change that to use $(error ...), which I guess was the original
intention. The result is:
$ make
../Makeconfig:42: *** objdir must be defined by the build-directory Makefile. Stop.
This better resembles the default linking process with the gnulibs,
and also resolves the increasingly difficult to maintain
f128-loader-link usage on powerpc64le as some libgcc symbols are
dependent on those found in the loader (ld).
