I used these shell commands:
../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")
and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 7061 files FOO.
I then removed trailing white space from math/tgmath.h,
support/tst-support-open-dev-null-range.c, and
sysdeps/x86_64/multiarch/strlen-vec.S, to work around the following
obscure pre-commit check failure diagnostics from Savannah. I don't
know why I run into these diagnostics whereas others evidently do not.
remote: *** 912-#endif
remote: *** 913:
remote: *** 914-
remote: *** error: lines with trailing whitespace found
...
remote: *** error: sysdeps/unix/sysv/linux/statx_cp.c: trailing lines
We stopped adding "Contributed by" or similar lines in sources in 2012
in favour of git logs and keeping the Contributors section of the
glibc manual up to date. Removing these lines makes the license
header a bit more consistent across files and also removes the
possibility of error in attribution when license blocks or files are
copied across since the contributed-by lines don't actually reflect
reality in those cases.
Move all "Contributed by" and similar lines (Written by, Test by,
etc.) into a new file CONTRIBUTED-BY to retain record of these
contributions. These contributors are also mentioned in
manual/contrib.texi, so we just maintain this additional record as a
courtesy to the earlier developers.
The following scripts were used to filter a list of files to edit in
place and to clean up the CONTRIBUTED-BY file respectively. These
were not added to the glibc sources because they're not expected to be
of any use in future given that this is a one time task:
https://gist.github.com/siddhesh/b5ecac94eabfd72ed2916d6d8157e7dchttps://gist.github.com/siddhesh/15ea1f5e435ace9774f485030695ee02
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
I used these shell commands:
../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")
and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 6694 files FOO.
I then removed trailing white space from benchtests/bench-pthread-locks.c
and iconvdata/tst-iconv-big5-hkscs-to-2ucs4.c, to work around this
diagnostic from Savannah:
remote: *** pre-commit check failed ...
remote: *** error: lines with trailing whitespace found
remote: error: hook declined to update refs/heads/master
One wart in the original support for test wrappers for cross testing,
as noted in
<https://sourceware.org/ml/libc-alpha/2012-10/msg00722.html>, is the
requirement for test wrappers to pass a poorly-defined set of
environment variables from the build system to the system running the
glibc under test. Although some variables are passed explicitly via
$(test-wrapper-env), including LD_* variables that simply can't be
passed implicitly because of the side effects they'd have on the build
system's dynamic linker, others are passed implicitly, including
variables such as GCONV_PATH and LOCPATH that could potentially affect
the build system's libc (so effectively relying on any such effects
not breaking the wrappers). In addition, the code in
cross-test-ssh.sh for preserving environment variables is fragile (it
depends on how bash formats a list of exported variables, and could
well break for multi-line variable definitions where the contents
contain things looking like other variable definitions).
This patch moves to explicitly passing environment variables via
$(test-wrapper-env). Makefile variables that previously used
$(test-wrapper) are split up into -before-env and -after-env parts
that can be passed separately to the various .sh files used in
testing, so those files can then insert environment settings between
the two parts.
The common default environment settings in make-test-out are made into
a separate makefile variable that can also be passed to scripts,
rather than many scripts duplicating those settings (for testing an
installed glibc, it is desirable to have the GCONV_PATH setting on
just one place, so just that one place needs to support it pointing to
an installed sysroot instead of the build tree). The default settings
are included in the variables such as $(test-program-prefix), so that
if tests do not need any non-default settings they can continue to use
single variables rather than the split-up variables.
Although this patch cleans up LC_ALL=C settings (that being part of
the common defaults), various LANG=C and LANGUAGE=C settings remain.
Those are generally unnecessary and I propose a subsequent cleanup to
remove them. LC_ALL takes precedence over LANG, and while LANGUAGE
takes precedence over LC_ALL, it only does so for settings other than
LC_ALL=C. So LC_ALL=C on its own is sufficient to ensure the C
locale, and anything that gets LC_ALL=C does not need the other
settings.
While preparing this patch I noticed some tests with .sh files that
appeared to do nothing beyond what the generic makefile support for
tests can do (localedata/tst-wctype.sh - the makefiles support -ENV
variables and .input files - and localedata/tst-mbswcs.sh - just runs
five tests that could be run individually from the makefile). So I
propose another subsequent cleanup to move those to using the generic
support instead of special .sh files.
Tested x86_64 (native) and powerpc32 (cross).
* Makeconfig (run-program-env): New variable.
(run-program-prefix-before-env): Likewise.
(run-program-prefix-after-env): Likewise.
(run-program-prefix): Define in terms of new variables.
(built-program-cmd-before-env): New variable.
(built-program-cmd-after-env): Likewise.
(built-program-cmd): Define in terms of new variables.
(test-program-prefix-before-env): New variable.
(test-program-prefix-after-env): Likewise.
(test-program-prefix): Define in terms of new variables.
(test-program-cmd-before-env): New variable.
(test-program-cmd-after-env): Likewise.
(test-program-cmd): Define in terms of new variables.
* Rules (make-test-out): Use $(run-program-env).
* scripts/cross-test-ssh.sh (env_blacklist): Remove variable.
(help): Do not mention environment variables. Mention
--timeoutfactor option.
(timeoutfactor): New variable.
(blacklist_exports): Remove function.
(exports): Remove variable.
(command): Do not include ${exports}.
* manual/install.texi (Configuring and compiling): Do not mention
test wrappers preserving environment variables. Mention that last
assignment to a variable must take precedence.
* INSTALL: Regenerated.
* benchtests/Makefile (run-bench): Use $(run-program-env).
* catgets/Makefile ($(objpfx)test1.cat): Use
$(built-program-cmd-before-env), $(run-program-env) and
$(built-program-cmd-after-env).
($(objpfx)test2.cat): Do not specify environment variables
explicitly.
($(objpfx)de/libc.cat): Use $(built-program-cmd-before-env),
$(run-program-env) and $(built-program-cmd-after-env).
($(objpfx)test-gencat.out): Use $(test-program-cmd-before-env),
$(run-program-env) and $(test-program-cmd-after-env).
($(objpfx)sample.SJIS.cat): Do not specify environment variables
explicitly.
* catgets/test-gencat.sh: Use test_program_cmd_before_env,
run_program_env and test_program_cmd_after_env arguments.
* elf/Makefile ($(objpfx)tst-pathopt.out): Use $(run-program-env).
* elf/tst-pathopt.sh: Use run_program_env argument.
* iconvdata/Makefile ($(objpfx)iconv-test.out): Use
$(test-wrapper-env) and $(run-program-env).
* iconvdata/run-iconv-test.sh: Use test_wrapper_env and
run_program_env arguments.
* iconvdata/tst-table.sh: Do not set GCONV_PATH explicitly.
* intl/Makefile ($(objpfx)tst-gettext.out): Use
$(test-program-prefix-before-env), $(run-program-env) and
$(test-program-prefix-after-env).
($(objpfx)tst-gettext2.out): Likewise.
* intl/tst-gettext.sh: Use test_program_prefix_before_env,
run_program_env and test_program_prefix_after_env arguments.
* intl/tst-gettext2.sh: Likewise.
* intl/tst-gettext4.sh: Do not set environment variables
explicitly.
* intl/tst-gettext6.sh: Likewise.
* intl/tst-translit.sh: Likewise.
* malloc/Makefile ($(objpfx)tst-mtrace.out): Use
$(test-program-prefix-before-env), $(run-program-env) and
$(test-program-prefix-after-env).
* malloc/tst-mtrace.sh: Use test_program_prefix_before_env,
run_program_env and test_program_prefix_after_env arguments.
* math/Makefile (run-regen-ulps): Use $(run-program-env).
* nptl/Makefile ($(objpfx)tst-tls6.out): Use $(run-program-env).
* nptl/tst-tls6.sh: Use run_program_env argument. Set LANG=C
explicitly with each use of ${test_wrapper_env}.
* posix/Makefile ($(objpfx)wordexp-tst.out): Use
$(test-program-prefix-before-env), $(run-program-env) and
$(test-program-prefix-after-env).
* posix/tst-getconf.sh: Do not set environment variables
explicitly.
* posix/wordexp-tst.sh: Use test_program_prefix_before_env,
run_program_env and test_program_prefix_after_env arguments.
* stdio-common/tst-printf.sh: Do not set environment variables
explicitly.
* stdlib/Makefile ($(objpfx)tst-fmtmsg.out): Use
$(test-program-prefix-before-env), $(run-program-env) and
$(test-program-prefix-after-env).
* stdlib/tst-fmtmsg.sh: Use test_program_prefix_before_env,
run_program_env and test_program_prefix_after_env arguments.
Split $test calls into $test_pre and $test.
* timezone/Makefile (build-testdata): Use
$(built-program-cmd-before-env), $(run-program-env) and
$(built-program-cmd-after-env).
localedata/ChangeLog:
* Makefile ($(addprefix $(objpfx),$(CTYPE_FILES))): Use
$(built-program-cmd-before-env), $(run-program-env) and
$(built-program-cmd-after-env).
($(objpfx)sort-test.out): Use $(test-program-prefix-before-env),
$(run-program-env) and $(test-program-prefix-after-env).
($(objpfx)tst-fmon.out): Use $(run-program-prefix-before-env),
$(run-program-env) and $(run-program-prefix-after-env).
($(objpfx)tst-locale.out): Use $(built-program-cmd-before-env),
$(run-program-env) and $(built-program-cmd-after-env).
($(objpfx)tst-trans.out): Use $(run-program-prefix-before-env),
$(run-program-env), $(run-program-prefix-after-env),
$(test-program-prefix-before-env) and
$(test-program-prefix-after-env).
($(objpfx)tst-ctype.out): Use $(test-program-cmd-before-env),
$(run-program-env) and $(test-program-cmd-after-env).
($(objpfx)tst-wctype.out): Likewise.
($(objpfx)tst-langinfo.out): Likewise.
($(objpfx)tst-langinfo-static.out): Likewise.
* gen-locale.sh: Use localedef_before_env, run_program_env and
localedef_after_env arguments.
* sort-test.sh: Use test_program_prefix_before_env,
run_program_env and test_program_prefix_after_env arguments.
* tst-ctype.sh: Use tst_ctype_before_env, run_program_env and
tst_ctype_after_env arguments.
* tst-fmon.sh: Use run_program_prefix_before_env, run_program_env
and run_program_prefix_after_env arguments.
* tst-langinfo.sh: Use tst_langinfo_before_env, run_program_env
and tst_langinfo_after_env arguments.
* tst-locale.sh: Use localedef_before_env, run_program_env and
localedef_after_env arguments.
* tst-mbswcs.sh: Do not set environment variables explicitly.
* tst-numeric.sh: Likewise.
* tst-rpmatch.sh: Likewise.
* tst-trans.sh: Use run_program_prefix_before_env,
run_program_env, run_program_prefix_after_env,
test_program_prefix_before_env and test_program_prefix_after_env
arguments.
* tst-wctype.sh: Use tst_wctype_before_env, run_program_env and
tst_wctype_after_env arguments.
2002-05-12 Bruno Haible <bruno@clisp.org>
* iconvdata/testdata/EUC-JISX0213: New file.
* iconvdata/testdata/EUC-JISX0213..UTF8: New file.
* iconvdata/testdata/SHIFT_JISX0213: New file.
* iconvdata/testdata/SHIFT_JISX0213..UTF8: New file.
* iconvdata/testdata/ISO-2022-JP-3: New file.
* iconvdata/testdata/ISO-2022-JP-3..UTF8: New file.
* iconvdata/TESTS: Add EUC-JISX0213, SHIFT_JISX0213, ISO-2022-JP-3.
* iconvdata/run-iconv-test.sh: Skip the charmap test if the charmap
contains comments indicating precomposed characters.
2002-04-21 Bruno Haible <bruno@clisp.org>
* iconvdata/iso-2022-jp-3.c: New file.
* iconvdata/gconv-modules (ISO-2022-JP-3): New module.
* iconvdata/Makefile (modules): Add ISO-2022-JP-3.
(LDFLAGS-ISO-2022-JP-3.so): New variable.
(ISO-2022-JP-3.so): Depend on libJIS.so and libJISX0213.so.
(distribute): Add iso-2022-jp-3.c.
2002-05-12 Bruno Haible <bruno@clisp.org>
* iconvdata/tst-table-to.c (main): Restore handling of
transliterations, broken by last patch.
2002-05-12 Bruno Haible <bruno@clisp.org>
* iconvdata/TESTS: Add IBM922, IBM1124, IBM1129.
2002-05-12 Bruno Haible <bruno@clisp.org>
* iconvdata/euc-jisx0213.c (BODY for FROM_LOOP): Don't advance inptr
when there is not enough room in the output buffer.
* iconvdata/shift_jisx0213.c (BODY for FROM_LOOP): Likewise.
2002-04-20 Bruno Haible <bruno@clisp.org>
* iconv/skeleton.c ({FROM,TO}_LOOP_{MIN,MAX}_NEEDED_{FROM,TO}): New
macros.
(RESET_INPUT_BUFFER): Use them instead of {MIN,MAX}_NEEDED_{FROM,TO}.
Also make this macro work if FROM_DIRECTION evaluates to 0.
(gconv_init): Use the new macros instead of {MIN,MAX}_NEEDED_{FROM,TO}.
(FUNCTION_NAME): Likewise, in the handling of unaligned accesses and
of consume_incomplete.
* iconvdata/cp1255.c: Define {FROM,TO}_LOOP_{MIN,MAX}_NEEDED_{FROM,TO}
instead of {MIN,MAX}_NEEDED_{FROM,TO}. Set FROM_LOOP_MAX_NEEDED_TO to
4, not 8.
* iconvdata/cp1258.c: Likewise.
* iconvdata/ibm930.c: Define {FROM,TO}_LOOP_{MIN,MAX}_NEEDED_{FROM,TO}
instead of {MIN,MAX}_NEEDED_{FROM,TO}. Set TO_LOOP_MAX_NEEDED_TO to 3,
not 2.
* iconvdata/ibm933.c: Likewise.
* iconvdata/ibm935.c: Likewise.
* iconvdata/ibm937.c: Likewise.
* iconvdata/ibm939.c: Likewise.
* iconvdata/iso-2022-cn.c: Define
{FROM,TO}_LOOP_{MIN,MAX}_NEEDED_{FROM,TO} instead of
{MIN,MAX}_NEEDED_{FROM,TO}. Set TO_LOOP_MAX_NEEDED_TO to 6, not 4.
* iconvdata/iso-2022-cn-ext.c: Likewise.
* iconvdata/iso-2022-jp.c: Define
{FROM,TO}_LOOP_{MIN,MAX}_NEEDED_{FROM,TO} instead of
{MIN,MAX}_NEEDED_{FROM,TO}.
* iconvdata/tcvn5712-1.c: Define
{FROM,TO}_LOOP_{MIN,MAX}_NEEDED_{FROM,TO} instead of
{MIN,MAX}_NEEDED_{FROM,TO}. Set FROM_LOOP_MAX_NEEDED_FROM to 1, not 2.
* iconvdata/euc-jisx0213.c: Define
{FROM,TO}_LOOP_{MIN,MAX}_NEEDED_{FROM,TO} instead of
{MIN,MAX}_NEEDED_{FROM,TO}. Set FROM_LOOP_MAX_NEEDED_TO to 8, not 4.
* iconvdata/shift_jisx0213.c: Likewise.
2002-05-14 Franz Sirl <Franz.Sirl-kernel@lauterbach.com>
* sysdeps/powerpc/Makefile (sysdeps_routines): Add divdi3, cmpdi2,
shdi3, fixdfdi, fixsfdi in csu dir.
(shared-only-routines): Likewise.
* sysdeps/wordsize-32/cmpdi2.c: New file.
* sysdeps/wordsize-32/shdi3.c: New file.
* sysdeps/wordsize-32/fixdfdi.c: New file.
* sysdeps/wordsize-32/fixsfdi.c: New file.
* sysdeps/powerpc/Versions (__divdi3, __moddi3, __udivdi3, __umoddi3,
__ashldi3, __ashrdi3, __lshrdi3, __cmpdi2, __ucmpdi2, __fixdfdi,
__fixsfdi, __fixunsdfdi, __fixunssfdi): Export at GLIBC_2.0.
* sysdeps/unix/sysv/linux/semctl.c (__old_semctl, __new_semctl):
Only use va_arg if the argument will be used [PR libc/3259].
2002-05-06 Michael A. Schmidt <mmaass@us.ibm.com>
* catgets/catgets.c (catopen): Free buffer if internal catalog
open fails.
2002-05-14 Ulrich Drepper <drepper@redhat.com>
* debug/xtrace.sh: Make more robust. For realtime tracking use
non-buffering methods.
* debug/pcprofiledump.c: Implement -u option.
Patch by Roger Luethi <rl@hellgate.ch>.
2001-07-06 Paul Eggert <eggert@twinsun.com>
* manual/argp.texi: Remove ignored LGPL copyright notice; it's
not appropriate for documentation anyway.
* manual/libc-texinfo.sh: "Library General Public License" ->
"Lesser General Public License".
2001-07-06 Andreas Jaeger <aj@suse.de>
* All files under GPL/LGPL version 2: Place under LGPL version
2.1.
2001-04-12 Bruno Haible <haible@clisp.cons.org>
* iconvdata/TESTS2: New file.
* iconvdata/run-iconv-test.sh: Also run tests from TESTS2.
* iconvdata/testdata/alfabeta..UTF-8: New file.
* iconvdata/testdata/alfabeta..UTF-16.BE: New file.
* iconvdata/testdata/alfabeta..UTF-16.LE: New file.
* iconvdata/testdata/alfabeta..UTF-32.BE: New file.
* iconvdata/testdata/alfabeta..UTF-32.LE: New file.
2001-04-11 Bruno Haible <haible@clisp.cons.org>
* iconvdata/utf-32.c: New file.
* iconvdata/gconv-modules: Add entries for UTF-32, UTF-32LE, UTF-32BE.
* iconvdata/Makefile (modules): Add UTF-32.
(distribute): Add utf-32.c.
2001-04-11 Bruno Haible <haible@clisp.cons.org>
* iconvdata/utf-16.c (PREPARE_LOOP): Initialize 'swap' after possibly
changing it in the state. After incrementing 'inptr', store it back.
* iconvdata/unicode.c (PREPARE_LOOP): After incrementing 'inptr',
store it back.
2001-04-11 Bruno Haible <haible@clisp.cons.org>
* iconvdata/utf-16.c (gconv_init): Use MAX_NEEDED_FROM, not
MIN_NEEDED_FROM.
2001-02-04 Ulrich Drepper <drepper@redhat.com>
* iconv/Makefile (iconv_prog-modules): Define. Add vpath to find
files in locale/programs. Add CFLAGS definition to allow compiling
localedef files.
* iconv/dummy-repertoire.c: New file.
* iconv/iconv_charmap.c: New file.
* iconv/iconv_prog.h: New file.
* iconv/iconv_prog.c: Make verbose and omit_invalid global.
(main): If parameter for -f and -t contain slashes try first to resolve
the strings as filenames of charmap files. Use them for conversion
in this case.
* iconvdata/run-iconv-test.sh: If charmaps exist also run tests with
iconv getting charmap names as parameters.
* locale/programs/linereader.c (lr_token): Take extra parameters
verbose and pass it to get_string.
(get_string): Take extra parameters verbose.
* locale/programs/charmap.c (parse_charmap): Take extra parameters
verbose and be_quiet. Change all callers of lr_token and
parse_charmap.
* locale/programs/charmap.h: Likewise.
* locale/programs/ld-address.c: Likewise.
* locale/programs/ld-collate.c: Likewise.
* locale/programs/ld-ctype.c: Likewise.
* locale/programs/ld-identification.c: Likewise.
* locale/programs/ld-measurement.c: Likewise.
* locale/programs/ld-messages.c: Likewise.
* locale/programs/ld-monetary.c: Likewise.
* locale/programs/ld-name.c: Likewise.
* locale/programs/ld-numeric.c: Likewise.
* locale/programs/ld-paper.c: Likewise.
* locale/programs/ld-telephone.c: Likewise.
* locale/programs/ld-time.c: Likewise.
* locale/programs/linereader.c: Likewise.
* locale/programs/linereader.h: Likewise.
* locale/programs/localedef.c: Likewise.
* locale/programs/locfile.c: Likewise.
* locale/programs/locfile.h: Likewise.
* locale/programs/repertoire.c: Likewise.
* iconvdata/run-iconv-test.sh: Reorgnize a bit to allow running only
the ASCII test.
* iconvdata/TESTS: Add entries for IBM932 and IBM943.
* iconvdata/Makefile (modules): Add IBM932 and IBM943.
* iconvdata/gconv-modules: Add entries for IBM932 and IBM943.
* iconvdata/ibm932.c: New file.
* iconvdata/ibm932.h: New file.
* iconvdata/ibm943.c: New file.
* iconvdata/ibm943.h: New file.
Patches by Masahide Washizawa <washi@jp.ibm.com>.
* iconvdata/TESTS: Add entries for IBM856, IBM930, IBM933, IBM935,
IBM937, IBM939, and IBM1046.
* iconvdata/testdata/IBM1046: New file.
* iconvdata/testdata/IBM930..UTF8: New file.
* iconvdata/testdata/IBM1046..UTF8: New file.
* iconvdata/testdata/IBM933: New file.
* iconvdata/testdata/IBM935: New file.
* iconvdata/testdata/IBM937: New file.
* iconvdata/testdata/IBM856..UTF8: New file.
* iconvdata/testdata/IBM939: New file.
* iconvdata/testdata/IBM933..UTF8: New file.
* iconvdata/testdata/IBM935..UTF8: New file.
* iconvdata/testdata/IBM930: New file.
* iconvdata/testdata/IBM856: New file.
* iconvdata/testdata/IBM937..UTF8: New file.
* iconvdata/testdata/IBM939..UTF8: New file.
Contributed by Masahide Washizawa <washi@yamato.ibm.co.jp>.
2000-11-01 Martin Buchholz <martin@xemacs.org>
* manual/memory.texi (Hooks for Malloc): Fix `caller' arg docs to
agree with implementation.
2000-11-01 Ulrich Drepper <drepper@redhat.com>
1998-05-19 23:08 Ulrich Drepper <drepper@cygnus.com>
* elf/rtld.c: Recognize --ignore-rpath argument and set _dl_ignore_path
variable using the value.
* elf/ldsodefs.h: Declare _dl_ignore_path.
* elf/dl-load.c (decompose_rpath): Compare name of handled shared
object against list in _dl_ignore_path and ignore RPATH if on the list.
* elf/dl-support.c: Define _dl_ignore_path for static binaries.
* iconvdata/run-iconv-test.sh: Call ld.so with --ignore-rpath parameter
to make sure we get the correct helper libraries loaded.
* elf/dl-load.c (decompose_rpath): Remove `room' parameter. Use
"RPATH" string in call to fillin_rpath instead.
(_dl_init_paths): Remove this parameter from call to decompose_rpath.
1998-05-18 11:38 Ulrich Drepper <drepper@cygnus.com>
* iconvdata/run-iconv-test.sh: Extend library-path by iconvdata
directory.
1998-05-16 Andreas Jaeger <aj@arthur.rhein-neckar.de>
* rpm/Makefile: Delete inclusion of version.mk.
1998-05-17 Andreas Jaeger <aj@arthur.rhein-neckar.de>
* libc.map: Add all libio functions needed libstdc++ with version
2.0, sort entries.
1998-05-18 Andreas Jaeger <aj@arthur.rhein-neckar.de>
* iconvdata/Makefile (generated): Add *.stmp files.
1998-05-17 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
* timezone/Makefile (testdata, build-testdata): New variables, use
them in rules for test data.
($(objpfx)tst-timezone.out): Depend on test data.
($(testdata)/Europe/Berlin, $(testdata)/Universal,
$(testdata)/Australia/Melbourne, $(testdata)/America/Sao_Paulo):
New rules to build test data.
(tst-timezone-ENV): Pass TZDIR to point to test data.
1998-05-04 Ulrich Drepper <drepper@cygnus.com>
* signal/signal.h: Move definitions of struct sigstack and
struct sigaltstack into separate file and include it.
* sysdeps/generic/bits/sigstack.h: New file.
* sysdeps/unix/sysv/linux/bits/sigstack.h: New file.
* signal/Makefile (headers): Add bits/sigstack.h.
1998-05-03 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
* elf/rtld.c (dl_main): Fix check for number of references to
interpreter object.
1998-05-03 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
* elf/rtld.c (dl_main): Check has_interp after executing platform
specific code.
1998-05-01 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
* iconvdata/run-iconv-test.sh: Fix typo.
1998-05-01 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
* Makerules (+depfiles): Add depfiles for $(tests-static).
Simplified.
1998-05-01 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
* manual/terminal.texi (Special Characters): Fix description of
c_cc indexes.
1998-05-01 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
* sysdeps/unix/sysv/linux/tcsetattr.c: Use memcpy to copy the c_cc
array.
* sysdeps/unix/sysv/linux/tcgetattr.c: Likewise. Initialize rest
of c_cc array.
1998-04-21 18:00 Ulrich Drepper <drepper@cygnus.com>
* iconv/gconv.c (__gconv): Remove bogus input buffer size computation.
* iconv/gconv_open.c (__gconv_open): Initialize outbufend element.
* iconv/gconv_simple.c (__gconv_transform_internal_ascii): Don't use
character in comparison with uint32_t.
(__gconv_transform_internal_utf8): Specify MAX_NEEDED_TO.
(__gconv_transform_utf8_internal): Specify MAX_NEEDED_FROM.
Optimize BODY a bit.
* iconv/loop.c: Require MIN_NEEDED_INPUT and MIN_NEEDED_OUTPUT to
be defined.
* iconv/skeleton.c: Also reset converted counter in case of an error.
Call reset function using correct value for output buffer start.
* iconvdata/Makefile: Re-enable tests.
* iconvdata/iso8859-1.c: Swap MIN_NEEDED_INPUT and MIN_NEEDED_OUTPUT
value for to-conversion.
* iconvdata/TESTS: Add new third column.
* iconvdata/run-iconv-test.sh: Add support for charsets which are
not ASCII based.
* iconvdata/testdata/suntzus: New file.
* elf/dl-minimal.c (__strtol_internal): Increment pointer to string
while reading. Correctly used base. Little optimization.
(__strtoul_internal): Likewise.
* elf/rtld.c (dl_main): Test to avoid duplicate call of _dl_init_paths
was wrong. Use explicit variable.
1998-04-20 23:49 Zack Weinberg <zack@rabi.phys.columbia.edu>
* configure.in: Check for awk.
* config.make.in: Add AWK to be substituted.
* manual/xtract-typefun.awk: Rewrite to eliminate gawk extensions.
* manual/users.texi: Fix typo exposed by above rewrite.
* Makefile: Invoke awk using AWK variable.
* csu/Makefile: Likewise.
* elf/Makefile: Likewise.
* mach/Makefile: Likewise.
* manual/Makefile: Likewise.
* sysdeps/gnu/Makefile: Likewise.
* sysdeps/mach/hurd/Makefile: Likewise.
* sysdeps/unix/Makefile: Likewise.
* timezone/Makefile: Likewise.
1998-04-10 Gordon Matzigkeit <gord@profitpress.com>
* sysdeps/gnu/errlist.awk (ERR_REMAP): Implement error code to
array index translation.
(SYS_ERRLIST_ALIAS, SYS_NERR_ALIAS): Make weak aliases only if
these are defined.
* sysdeps/mach/hurd/Dist: Add errlist.c to distribution.
* sysdeps/mach/hurd/errlist.c: New file.
(ERR_TRANSLATE): Map Hurd error codes into errlist indices.
(_hurd_errlist): The Hurd error list doesn't have Unix sys_errlist
semantics, so rename it.
1998-04-16 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
* iconvdata/run-iconv-test.sh: Make portable. Always test all
conversions.
1998-04-21 12:30 H.J. Lu <hjl@gnu.org>
* wcsmbs/wcsrtombs.c (__wcsrtombs): Initialize result to 0.
* wcsmbs/wcsnrtombs.c: Likewise.
1998-04-21 Ulrich Drepper <drepper@cygnus.com>
* sysdeps/generic/dl-sysdep.c: Handle _dl_hwcap correctly.
* wcsmbs/btowc.c (__btowc): Declare inptr as const char *.
* time/strftime.c (my_strftime): Initialize pad variable in
declaration.
* iconvdata/big5.c: Don't use character constants in comparisons
with unsigned value.
* sysdeps/generic/setutxent.c: New file.
* sysdeps/generic/getutxent.c: New file.
* sysdeps/generic/endutxent.c: New file.
* sysdeps/generic/getutxid.c: New file.
* sysdeps/generic/getutxline.c: New file.
* sysdeps/generic/pututxline.c: New file.
* sysdeps/generic/utmpxname.c: New file.
* sysdeps/generic/updwtmpx.c: New file.
1998-04-14 23:54 Ulrich Drepper <drepper@cygnus.com>
* iconvdata/Makefile: Add rules to run tests.
* iconvdata/TESTS: New file.
* iconvdata/run-iconv-test.sh: New file.
* iconv/iconv_prog.c (main): Call process_block with OUTPUT stream,
not stdout.
