A recent change to libio/tst-ftell-active-handler.c (postdating my
last check for warnings on x86) introduced a format warning from a
long int variable used with a %zu format. This patch fixes it by
using %ld for the format to match the variable.
Tested for x86.
* libio/tst-ftell-active-handler.c (do_ftruncate_test): Use %ld
format for long int variable.
On 'do_ftell_test' the code:
365 if (test_modes[i].fd_mode != O_WRONLY)
366 {
367 char tmpbuf[data_len];
368
369 rewind (fp);
370
371 while (fgets_func (tmpbuf, sizeof (tmpbuf), fp) && !feof (fp));
The 'data_len' is calculated with wsclen and allocated as 'char'. The
subsequent fgetws will then try to write at most 'data_len' wchar_t
in a buffer with just data_len 'char'. This patch fixes it by
allocating the tmpbuf using 'wchar_t' * data_len bytes.
POSIX allows applications to switch file handles when a read results
in an end of file. Unset the cached offset at this point so that it
is queried again.
The test case fails to truncate the file when a file is intended to be
opened in w or w+ mode. Add O_TRUNC to fix this. The test still
succeeds with this change.
Currently we seek to end of file if there are unflushed writes or the
stream is in write mode, to get the current offset for writing in
append mode, which is the end of file. The latter case (i.e. stream
is in write mode, but no unflushed writes) is unnecessary since it
will only happen when the stream has just been flushed, in which case
the recorded offset ought to be reliable.
Removing that case lets ftell give the correct offset when it follows
an ftruncate. The latter truncates the file, but does not change the
file position, due to which it is permissible to call ftell without an
intervening fseek call.
Tested on x86_64 to verify that the added test case fails without the
patch and succeeds with it, and that there are no additional
regressions due to it.
[BZ #17647]
* libio/fileops.c (do_ftell): Seek only when there are
unflushed writes.
* libio/wfileops.c (do_ftell_wide): Likewise.
* libio/tst-ftell-active-handler.c (do_ftruncate_test): New
test case.
(do_one_test): Call it.
This patch fixes a warning "variable 'wc' set but not used" in
libio/bug-ungetwc1.c.
The test didn't verify much about the results of the functions it
called. This patch makes it check the result of getwc (thereby fixing
the warning), check end of file does not arrive too late in the getwc
loop, and check EOF is no longer set after ungetwc.
Tested for x86_64.
* libio/bug-ungetwc1.c (do_test): Verify results of getwc and
feof.
This patch fixes "set but not used" warnings in the tests
libio/bug-rewind.c and libio/bug-rewind2.c by checking the return
values from fwscanf and making the tests fail if those values aren't
as expected.
Tested for x86_64.
* libio/bug-rewind.c (do_test): Check fwscanf return values.
* libio/bug-rewind2.c (do_test): Likewise.
__get_nprocs is called from malloc code, but calls fgets_unlocked,
which is not an ISO C or POSIX function. This patch fixes it to call
a new __fgets_unlocked name instead.
Note: there are various other uses of fgets_unlocked in glibc's
libraries, and I haven't yet investigated which others might also be
problematic (called directly or indirectly from standard functions)
and so need to change to use __fgets_unlocked.
Tested for x86_64 (testsuite, and that disassembly of installed shared
libraries is unchanged by the patch).
[BZ #17582]
* libio/iofgets.c [weak_alias && !_IO_MTSAFE_IO]
(__fgets_unlocked): Add alias of _IO_fgets. Use libc_hidden_def.
* libio/iofgets_u.c (fgets_unlocked): Rename to __fgets_unlocked
and define as weak alias of __fgets_unlocked. Use
libc_hidden_weak.
(__fgets_unlocked): Use libc_hidden_def.
* include/stdio.h (__fgets_unlocked): Declare. Use
libc_hidden_proto.
* sysdeps/unix/sysv/linux/getsysstats.c (phys_pages_info): Use
__fgets_unlocked instead of fgets_unlocked.
* sysdeps/unix/sysv/linux/alpha/getsysstats.c
(GET_NPROCS_CONF_PARSER): Likewise.
* sysdeps/unix/sysv/linux/sparc/getsysstats.c
(GET_NPROCS_CONF_PARSER): Likewise.
tzfile.c is brought in by various ISO C functions, but calls fileno,
fread_unlocked and ftello, which are not ISO C functions. This patch
adds names __fileno, __fread_unlocked and __ftello for those
functions, making tzfile.c use those new names.
Note: there are various uses of fileno elsewhere in glibc that I
didn't change, although it may turn out that some of those also need
to use __fileno.
Tested for x86_64 with the glibc testsuite. Changed line numbers in
tzfile.c cause changes in assertions, and for some reason this ends up
with different instruction choice and register allocation, affecting
the size of __tzfile_read and so making comparison of disassembly for
libc.so problematic.
[BZ #17583]
* libio/fileno.c (fileno): Rename to __fileno and define as weak
alias of __fileno. Use libc_hidden_weak.
(__fileno): Use libc_hidden_def.
[weak_alias] (fileno_unlocked): Define as weak alias of __fileno.
* libio/ftello.c (ftello): Rename to __ftello and define as weak
alias of __ftello.
[__OFF_T_MATCHES_OFF64_T] (ftello64): Define as weak alias of
__ftello.
* libio/iofread.c [weak_alias && !_IO_MTSAFE_IO]
(__fread_unlocked): Define as strong alias of _IO_fread. Use
libc_hidden_def.
(fread_unlocked): Don't use libc_hidden_ver.
* libio/iofread_u.c (fread_unlocked): Rename to __fread_unlocked
and define as weak alias of __fread_unlocked. Don't use
libc_hidden_def.
(__fread_unlocked): Use libc_hidden_def.
* include/stdio.h (__fileno): Declare. Use libc_hidden_proto.
(ftello): Don't use libc_hidden_proto.
(__ftello): Declare. Use libc_hidden_proto.
(fread_unlocked): Don't use libc_hidden_proto.
(__fread_unlocked): Declare. Use libc_hidden_proto.
* time/tzfile.c (__tzfile_read): Use __fileno, __fread_unlocked
and __ftello instead of fileno, fread_unlocked and ftello.
The check for only __GNUC_STDC_INLINE__ and __GNUC_GNU_INLINE__ may
not be sufficient since those flags were added during initial support
for C99 inlining semantics. There is also a problem with always
defining __extern_inline and __extern_always_inline, since it enables
inline wrapper functions even when GNU inlining semantics are not
guaranteed. This, along with the possibility of such wrappers using
redirection (btowc for example) could result in compiler generating an
infinitely recusrive call to the function.
In fact it was such a recursion that led to this code being written
the way it was; see:
https://bugzilla.redhat.com/show_bug.cgi?id=186410
The initial change was to fix bugs 14530 and 13741, but they can be
resolved by checking if __fortify_function and/or
__extern_always_inline are defined, as it has been done in this patch.
In addition, I have audited uses of __extern_always_inline to make
sure that none of the uses result in compilation errors.
There is however a regression in this patch for llvm, since it reverts
the llvm expectation that __GNUC_STDC_INLINE__ or __GNUC_GNU_INLINE__
definition imply proper extern inline semantics.
2014-09-16 Siddhesh Poyarekar <siddhesh@redhat.com>
Jakub Jelinek <jakub@redhat.com>
[BZ #17266]
* libio/stdio.h: Check definition of __fortify_function
instead of __extern_always_inline to include bits/stdio2.h.
* math/bits/math-finite.h [__USE_XOPEN || __USE_ISOC99]: Also
check if __extern_always_inline is defined.
[__USE_MISC || __USE_XOPEN]: Likewise.
[__USE_ISOC99] Likewise.
* misc/sys/cdefs.h (__fortify_function): Define only if
__extern_always_inline is defined.
[!__cplusplus || __GNUC_PREREQ (4,3)]: Revert to defining
__extern_always_inline and __extern_inline only for g++-4.3
and newer or a compatible gcc.
Prior to the 2.20 release, the function was just changed to fail
unconditionally, in commit a1a6a401ab.
This commit removes the function completely, including gconv bits
which depend on it.
This changes the gconv ABI, which is not a public interface.
Various glibc build / install / test code has C locale settings that
are redundant with LC_ALL=C.
LC_ALL takes precedence over LANG, so anywhere that sets LC_ALL=C
(explicitly, or through it being in the default environment for
running tests) does not need to set LANG=C. LC_ALL=C also takes
precedence over LANGUAGE, since
2001-01-02 Ulrich Drepper <drepper@redhat.com>
* intl/dcigettext.c (guess_category_value): Rewrite so that LANGUAGE
value is ignored if the selected locale is the C locale.
* intl/tst-gettext.c: Set locale for above change.
* intl/tst-translit.c: Likewise.
and so settings of LANGUAGE=C are also redundant when LC_ALL=C is
set. One test also had LC_ALL=C in its -ENV setting, although it's
part of the default environment used for tests.
This patch removes the redundant settings. It removes a suggestion in
install.texi of setting LANGUAGE=C LC_ALL=C for "make install"; the
Makefile.in target "install" already sets LC_ALL_C so there's no need
for the user to set it (and nor should there be any need for the user
to set it).
If some build machine tool used by "make install" uses a version of
libintl predating that 2001 change, and the user has LANGUAGE set, the
removal of LANGUAGE=C from the Makefile.in "install" rule could in
principle affect the user's installation. However, I don't think we
need to be concerned about pre-2001 build tools.
Tested x86_64.
* Makefile (install): Don't set LANGUAGE.
* Makefile.in (install): Likewise.
* assert/Makefile (test-assert-ENV): Remove variable.
(test-assert-perr-ENV): Likewise.
* elf/Makefile (neededtest4-ENV): Likewise.
* iconvdata/Makefile ($(inst_gconvdir)/gconv-modules)
[$(cross-compiling) = no]: Don't set LANGUAGE.
* io/ftwtest-sh (LANG): Remove variable.
* libio/Makefile (tst-widetext-ENV): Likewise.
* manual/install.texi (Running make install): Don't refer to
environment settings for make install.
* INSTALL: Regenerated.
* nptl/tst-tls6.sh: Don't set LANG.
* posix/globtest.sh (LANG): Remove variable.
* string/Makefile (tester-ENV): Likewise.
(inl-tester-ENV): Likewise.
(noinl-tester-ENV): Likewise.
* sysdeps/s390/s390-64/Makefile ($(inst_gconvdir)/gconv-modules)
[$(cross-compiling) = no]: Don't set LANGUAGE.
* timezone/Makefile (build-testdata): Use $(built-program-cmd)
without explicit environment settings.
localedata/ChangeLog:
* tst-fmon.sh: Don't set LANGUAGE.
* tst-locale.sh: Likewise.
Tests run using the default $(make-test-out) automatically get
GCONV_PATH and LC_ALL set, whether or not those environment variables
are actually needed for the individual test. However, they do not get
LOCPATH set, meaning that a large number of tests have -ENV settings
just to set LOCPATH.
This patch moves LOCPATH into the default environment used for all
tests, on the principle that like GCONV_PATH any settings needed to
use files associated with the newly built library, rather than any old
installed files, are appropriate to use by default.
A further motivation is that various tests using .sh files also set
some combination of LC_ALL, GCONV_PATH and LOCPATH. Preferably .sh
files should also use the default environment with any additions
required for the individual test. Now, it was suggested in
<https://sourceware.org/ml/libc-alpha/2014-05/msg00715.html> that
various Makefile variables used in testing should be derived by
composing the -before-env and -after-env variables used when explicit
environment settings are required. With such a change, it's also
natural for those variables to include the default settings (via some
intermediate makefile variable also used in make-test-out).
Because some .sh files only set variables that correspond to the
default settings, or a subset thereof, and this applies to more of the
.sh files once LOCPATH is in the default settings, doing so reduces
the size of a revised version of
<https://sourceware.org/ml/libc-alpha/2014-05/msg00596.html>: scripts
only needing the (expanded) default settings will not need to receive
the separate -before-env and -after-env variables, only the single
variable they do at present. So moving LOCPATH into the default
settings can reduce churn caused by subsequent patches.
Tested x86_64 and x86.
* Rules (make-test-out): Include
LOCPATH=$(common-objpfx)localedata in default environment.
* debug/Makefile (tst-chk1-ENV): Remove variable.
(tst-chk2-ENV): Likewise.
(tst-chk3-ENV): Likewise.
(tst-chk4-ENV): Likewise.
(tst-chk5-ENV): Likewise.
(tst-chk6-ENV): Likewise.
(tst-lfschk1-ENV): Likewise.
(tst-lfschk2-ENV): Likewise.
(tst-lfschk3-ENV): Likewise.
(tst-lfschk4-ENV): Likewise.
(tst-lfschk5-ENV): Likewise.
(tst-lfschk6-ENV): Likewise.
* iconvdata/Makefile (bug-iconv6-ENV): Likewise.
(tst-iconv7-ENV): Likewise.
* intl/Makefile (LOCPATH-ENV): Likewise.
(tst-codeset-ENV): Likewise.
(tst-gettext3-ENV): Likewise.
(tst-gettext5-ENV): Likewise.
* libio/Makefile (tst-widetext-ENV): Don't set LOCPATH.
(tst-fopenloc-ENV): Likewise.
(tst-fgetws-ENV): Remove variable.
(tst-ungetwc1-ENV): Likewise.
(tst-ungetwc2-ENV): Likewise.
(bug-ungetwc2-ENV): Likewise.
(tst-swscanf-ENV): Likewise.
(bug-ftell-ENV): Likewise.
(tst-fgetwc-ENV): Likewise.
(tst-fseek-ENV): Likewise.
(tst-ftell-partial-wide-ENV): Likewise.
(tst-ftell-active-handler-ENV): Likewise.
(tst-ftell-append-ENV): Likewise.
* posix/Makefile (tst-fnmatch-ENV): Likewise.
(tst-regexloc-ENV): Likewise.
(bug-regex1-ENV): Likewise.
(tst-regex-ENV): Likewise.
(tst-regex2-ENV): Likewise.
(bug-regex5-ENV): Likewise.
(bug-regex6-ENV): Likewise.
(bug-regex17-ENV): Likewise.
(bug-regex18-ENV): Likewise.
(bug-regex19-ENV): Likewise.
(bug-regex20-ENV): Likewise.
(bug-regex22-ENV): Likewise.
(bug-regex23-ENV): Likewise.
(bug-regex25-ENV): Likewise.
(bug-regex26-ENV): Likewise.
(bug-regex30-ENV): Likewise.
(bug-regex32-ENV): Likewise.
(bug-regex33-ENV): Likewise.
(bug-regex34-ENV): Likewise.
(bug-regex35-ENV): Likewise.
(tst-rxspencer-ENV): Likewise.
(tst-rxspencer-no-utf8-ENV): Likewise.
* stdio-common/Makefile (tst-sprintf-ENV): Likewise.
(tst-sscanf-ENV): Likewise.
(tst-swprintf-ENV): Likewise.
(tst-swscanf-ENV): Likewise.
(test-vfprintf-ENV): Likewise.
(scanf13-ENV): Likewise.
(bug14-ENV): Likewise.
(tst-grouping-ENV): Likewise.
* stdlib/Makefile (tst-strtod-ENV): Likewise.
(tst-strtod3-ENV): Likewise.
(tst-strtod4-ENV): Likewise.
(tst-strtod5-ENV): Likewise.
(testmb2-ENV): Likewise./
* string/Makefile (tst-strxfrm-ENV): Likewise.
(tst-strxfrm2-ENV): Likewise.
(bug-strcoll1-ENV): Likewise.
(test-strcasecmp-ENV): Likewise.
(test-strncasecmp-ENV): Likewise.
* time/Makefile (tst-strptime-ENV): Likewise.
(tst-ftime_l-ENV): Likewise.
* wcsmbs/Makefile (tst-btowc-ENV): Likewise.
(tst-mbrtowc-ENV): Likewise.
(tst-wcrtomb-ENV): Likewise.
(tst-mbrtowc2-ENV): Likewise.
(tst-c16c32-1-ENV): Likewise.
(tst-mbsnrtowcs-ENV): Likewise.
localedata/ChangeLog:
* Makefile (TEST_MBWC_ENV): Remove variable.
(tst_iswalnum-ENV): Likewise.
(tst_iswalpha-ENV): Likewise.
(tst_iswcntrl-ENV): Likewise.
(tst_iswctype-ENV): Likewise.
(tst_iswdigit-ENV): Likewise.
(tst_iswgraph-ENV): Likewise.
(tst_iswlower-ENV): Likewise.
(tst_iswprint-ENV): Likewise.
(tst_iswpunct-ENV): Likewise.
(tst_iswspace-ENV): Likewise.
(tst_iswupper-ENV): Likewise.
(tst_iswxdigit-ENV): Likewise.
(tst_mblen-ENV): Likewise.
(tst_mbrlen-ENV): Likewise.
(tst_mbrtowc-ENV): Likewise.
(tst_mbsrtowcs-ENV): Likewise.
(tst_mbstowcs-ENV): Likewise.
(tst_mbtowc-ENV): Likewise.
(tst_strcoll-ENV): Likewise.
(tst_strfmon-ENV): Likewise.
(tst_strxfrm-ENV): Likewise.
(tst_swscanf-ENV): Likewise.
(tst_towctrans-ENV): Likewise.
(tst_towlower-ENV): Likewise.
(tst_towupper-ENV): Likewise.
(tst_wcrtomb-ENV): Likewise.
(tst_wcscat-ENV): Likewise.
(tst_wcschr-ENV): Likewise.
(tst_wcscmp-ENV): Likewise.
(tst_wcscoll-ENV): Likewise.
(tst_wcscpy-ENV): Likewise.
(tst_wcscspn-ENV): Likewise.
(tst_wcslen-ENV): Likewise.
(tst_wcsncat-ENV): Likewise.
(tst_wcsncmp-ENV): Likewise.
(tst_wcsncpy-ENV): Likewise.
(tst_wcspbrk-ENV): Likewise.
(tst_wcsrtombs-ENV): Likewise.
(tst_wcsspn-ENV): Likewise.
(tst_wcsstr-ENV): Likewise.
(tst_wcstod-ENV): Likewise.
(tst_wcstok-ENV): Likewise.
(tst_wcstombs-ENV): Likewise.
(tst_wcswidth-ENV): Likewise.
(tst_wcsxfrm-ENV): Likewise.
(tst_wctob-ENV): Likewise.
(tst_wctomb-ENV): Likewise.
(tst_wctrans-ENV): Likewise.
(tst_wctype-ENV): Likewise.
(tst_wcwidth-ENV): Likewise.
(tst-digits-ENV): Likewise.
(tst-mbswcs6-ENV): Likewise.
(tst-xlocale1-ENV): Likewise.
(tst-xlocale2-ENV): Likewise.
(tst-strfmon1-ENV): Likewise.
(tst-strptime-ENV): Likewise.
(tst-setlocale-ENV): Don't set LOCPATH.
(bug-iconv-trans-ENV): Remove variable.
(tst-sscanf-ENV): Likewise.
(tst-leaks-ENV): Don't set LOCPATH.
(bug-setlocale1-ENV): Remove variable.
(bug-setlocale1-static-ENV): Likewise.
(tst-setlocale2-ENV): Likewise.
The offset computation in write mode uses the fact that _IO_read_end
is kept in sync with the external file offset. This however is not
true when O_APPEND is in effect since switching to write mode ought to
send the external file offset to the end of file without making the
necessary adjustment to _IO_read_end.
Hence in append mode, offset computation when writing should only
consider the effect of unflushed writes, i.e. from _IO_write_base to
_IO_write_ptr.
The wiki has a detailed document that describes the rationale for
offsets returned by ftell in various conditions:
https://sourceware.org/glibc/wiki/File%20offsets%20in%20a%20stdio%20stream%20and%20ftell
ChangeLog:
2014-03-17 Will Newton <will.newton@linaro.org>
* libio/genops.c: Check whether
_IO_JUMPS_OFFSET is defined with #ifdef rather
than #if.
* libio/libioP.h: Likewise.
* stdio-common/vfprintf.c: Likewise.
fdopen should only be allowed to change the offset in the file it
attaches to if it is setting O_APPEND. If O_APPEND is already set, it
should not change the state of the handle.
The ftell implementation was made conservative to ensure that
incorrectly cached offsets never affect it. However, this causes
problems for append mode when a file stream is rewound. Additionally,
the 'clever' trick of using stat to get position for append mode files
caused more problems than it solved and broke old behavior. I have
described the various problems that it caused and then finally the
solution.
For a and a+ mode files, rewinding the stream should result in ftell
returning 0 as the offset, but the stat() trick caused it to
(incorrectly) always return the end of file. Now I couldn't find
anything in POSIX that specifies the stream position after rewind()
for a file opened in 'a' mode, but for 'a+' mode it should be set to
0. For 'a' mode too, it probably makes sense to keep it set to 0 in
the interest of retaining old behavior.
The initial file position for append mode files is implementation
defined, so the implementation could either retain the current file
position or move the position to the end of file. The earlier ftell
implementation would move the offset to end of file for append-only
mode, but retain the old offset for a+ mode. It would also cache the
offset (this detail is important). My patch broke this and would set
the initial position to end of file for both append modes, thus
breaking old behavior. I was ignorant enough to write an incorrect
test case for it too.
The Change:
I have now brought back the behavior of seeking to end of file for
append-only streams, but with a slight difference. I don't cache the
offset though, since we would want ftell to query the current file
position through lseek while the stream is not active. Since the
offset is moved to the end of file, we can rely on the file position
reported by lseek and we don't need to resort to the stat() nonsense.
Finally, the cache is always reliable, except when there are unflished
writes in an append mode stream (i.e. both a and a+). In the latter
case, it is safe to just do an lseek to SEEK_END. The value can be
safely cached too, since the file handle is already active at this
point. Incidentally, this is the only state change we affect in the
file handle (apart from taking locks of course).
I have also updated the test case to correct my impression of the
initial file position for a+ streams to the initial behavior. I have
verified that this does not break any existing tests in the testsuite
and also passes with the new tests.
The test functions used a variable ret to store failure codes for
individual tests, but the variable was incorrectly used to record
other failure codes too, resulting in overwriting of the tests status.
This is now fixed by making sure that the ret variable is used only
for recording test failures.
* libio/tst-ftell-active-handler.c (do_ftell_test): Don't mix
up test status with function return status.
(do_write_test): Likewise.
(do_append_test): Likewise.
This patch is a revised and updated version of
<https://sourceware.org/ml/libc-alpha/2014-01/msg00196.html>.
In order to generate overall summaries of the results of all tests in
the glibc testsuite, we need to identify and concatenate the files
with the results of individual tests.
Tomas Dohnalek's patch used $(common-objpfx)*/*.test-result for this.
However, the normal glibc approach is explicit enumeration of the
expected set of files with a given property, rather than all files
matching some pattern like that. Furthermore, we would like to be
able to mark tests as UNRESOLVED if the file with their results is for
some reason missing, and in future we would like to be able to mark
tests as UNSUPPORTED if they are disabled for a particular
configuration (rather than simply having them missing from the list of
tests as at present). Such handling of tests that were not run or did
not record results requires an explicit enumeration of tests.
For the tests following the default makefile rules, $(tests) (and
$(xtests)) provides such an enumeration. Others, however, are added
directly as dependencies of the "tests" and "xtests" makefile
targets. This patch changes the makefiles to put them in variables
tests-special and xtests-special, with appropriate dependencies on the
tests listed there then being added centrally.
Those variables are used in Rules and so need to be set before Rules
is included in a subdirectory makefile, which is often earlier in the
makefile than the dependencies were present before. We previously
discussed the question of where to include Rules; see the question at
<https://sourceware.org/ml/libc-alpha/2012-11/msg00798.html>, and a
discussion in
<https://sourceware.org/ml/libc-alpha/2013-01/msg00337.html> of why
Rules is included early rather than late in subdirectory makefiles.
It was necessary to avoid an indirection through the check-abi target
and get the check-abi-* targets for individual libraries into the
tests-special variable. The intl/ test $(objpfx)tst-gettext.out,
previously built only because of dependencies from other tests, was
also added to tests-special for the same reason.
The entries in tests-special are the full makefile targets, complete
with $(objpfx) and .out. If a future change causes tests to be named
consistently with a .out suffix, this can be changed to include just
the path relative to $(objpfx), without .out.
Tested x86_64, including that the same set of files is generated in
the build directory by a build and testsuite run both before and after
the patch (except for changes to the
elf/tst-null-argv.debug.out.<number> file name), and a build with
run-built-tests=no to verify there aren't any more obvious instances
of the issue Marcus Shawcroft reported with a previous version in
<https://sourceware.org/ml/libc-alpha/2014-01/msg00462.html>.
* Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
(tests): Depend on $(tests-special).
* Makerules (check-abi-list): New variable.
(check-abi): Depend on $(check-abi-list).
[$(subdir) = elf] (tests-special): Add
$(objpfx)check-abi-libc.out.
[$(build-shared) = yes && subdir] (tests-special): Add
$(check-abi-list).
[$(build-shared) = yes && subdir] (tests): Do not depend on
check-abi.
* Rules (tests): Depend on $(tests-special).
(xtests): Depend on $(xtests-special).
* catgets/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* conform/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* elf/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* grp/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* iconv/Makefile (xtests): Change dependencies to ....
(xtests-special): ... additions to this variable.
* iconvdata/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* intl/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable. Also add
$(objpfx)tst-gettext.out.
* io/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* libio/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* malloc/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* misc/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* nptl/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* nptl_db/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* posix/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
(xtests): Change dependencies to ....
(xtests-special): ... additions to this variable.
* resolv/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
(xtests): Change dependencies to ....
(xtests-special): ... additions to this variable.
* stdio-common/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
(do-tst-unbputc): Remove target.
(do-tst-printf): Likewise.
* stdlib/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* string/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* sysdeps/x86/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
localedata:
* Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
The cached offset is reliable to use in ftell when the stream handle
is active. We can consider a stream as being active when there is
unflushed data. However, even in this case, we can use the cached
offset only when the stream is not being written to in a+ mode,
because this case may have unflushed data and a stale offset; the
previous read could have sent it off somewhere other than the end of
the file.
There were a couple of adjustments necessary to get this to work.
Firstly, fdopen now ceases to use _IO_attach_fd because it sets the
offset cache to the current file position. This is not correct
because there could be changes to the file descriptor before the
stream handle is activated, which would not get reflected.
A similar offset caching action is done in _IO_fwide, claiming that
wide streams have 'problems' with the file offsets. There don't seem
to be any obvious problems with not having the offset cache available,
other than that it will have to be queried in a subsequent
read/write/seek. I have removed this as well.
The testsuite passes successfully with these changes on x86_64.
ftell semantics are distinct from fseek(SEEK_CUR) especially when it
is called on a file handler that is not yet active. Due to this
caveat, much care needs to be taken while modifying the handler data
and hence, this first iteration on separating out ftell focusses on
maintaining handler data integrity at all times while it figures out
the current stream offset. The result is that it makes a syscall for
every offset request.
There is scope for optimizing this by caching offsets when we know
that the handler is active. A simple way to find out is when the
buffers have data. It is not so simple to find this out when the
buffer is empty without adding some kind of flag.
In <https://sourceware.org/ml/libc-alpha/2014-01/msg00196.html> I
noted it was necessary to add includes of Makeconfig early in various
subdirectory makefiles for the tests-special variable settings added
by that patch to be conditional on configuration information. No-one
commented on the general question there of whether Makeconfig should
always be included immediately after the definition of subdir.
This patch implements that early inclusion of Makeconfig in each
directory (which is a lot easier than consistent placement of includes
of Rules). Includes are added if needed, or moved up if already
present. Subdirectory "all:" targets are removed, since Makeconfig
provides one.
There is potential for further cleanups I haven't done. Rules and
Makerules have code such as
ifneq "$(findstring env,$(origin headers))" ""
headers :=
endif
to override to empty any value of various variables that came from the
environment. I think there is a case for Makeconfig setting all the
subdirectory variables (other than subdir) to empty to ensure no
outside value is going to take effect if a subdirectory fails to
define a variable. (A list of such variables, possibly out of date
and incomplete, is in manual/maint.texi.) Rules and Makerules would
give errors if Makeconfig hadn't already been included, instead of
including it themselves. The special code to override values coming
from the environment would then be obsolete and could be removed.
Tested x86_64, including that installed binaries are identical before
and after the patch.
* argp/Makefile: Include Makeconfig immediately after defining
subdir.
* assert/Makefile: Likewise.
* benchtests/Makefile: Likewise.
* catgets/Makefile: Likewise.
* conform/Makefile: Likewise.
* crypt/Makefile: Likewise.
* csu/Makefile: Likewise.
(all): Remove target.
* ctype/Makefile: Include Makeconfig immediately after defining
subdir.
* debug/Makefile: Likewise.
* dirent/Makefile: Likewise.
* dlfcn/Makefile: Likewise.
* gmon/Makefile: Likewise.
* gnulib/Makefile: Likewise.
* grp/Makefile: Likewise.
* gshadow/Makefile: Likewise.
* hesiod/Makefile: Likewise.
* hurd/Makefile: Likewise.
(all): Remove target.
* iconvdata/Makefile: Include Makeconfig immediately after
defining subdir.
* inet/Makefile: Likewise.
* intl/Makefile: Likewise.
* io/Makefile: Likewise.
* libio/Makefile: Likewise.
(all): Remove target.
* locale/Makefile: Include Makeconfig immediately after defining
subdir.
* login/Makefile: Likewise.
* mach/Makefile: Likewise.
(all): Remove target.
* malloc/Makefile: Include Makeconfig immediately after defining
subdir.
(all): Remove target.
* manual/Makefile: Include Makeconfig immediately after defining
subdir.
* math/Makefile: Likewise.
* misc/Makefile: Likewise.
* nis/Makefile: Likewise.
* nss/Makefile: Likewise.
* po/Makefile: Likewise.
(all): Remove target.
* posix/Makefile: Include Makeconfig immediately after defining
subdir.
* pwd/Makefile: Likewise.
* resolv/Makefile: Likewise.
* resource/Makefile: Likewise.
* rt/Makefile: Likewise.
* setjmp/Makefile: Likewise.
* shadow/Makefile: Likewise.
* signal/Makefile: Likewise.
* socket/Makefile: Likewise.
* soft-fp/Makefile: Likewise.
* stdio-common/Makefile: Likewise.
* stdlib/Makefile: Likewise.
* streams/Makefile: Likewise.
* string/Makefile: Likewise.
* sunrpc/Makefile: Likewise.
(all): Remove target.
* sysvipc/Makefile: Include Makeconfig immediately after defining
subdir.
* termios/Makefile: Likewise.
* time/Makefile: Likewise.
* timezone/Makefile: Likewise.
(all): Remove target.
* wcsmbs/Makefile: Include Makeconfig immediately after defining
subdir.
* wctype/Makefile: Likewise.
libidn/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
localedata/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
(all): Remove target.
nptl/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
nptl_db/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
Most glibc tests that use mtrace to verify that there were no memory
leaks from the glibc facilities used in a given test depend on the
.out file of the previous test so that the mtrace test runs mtrace and
nothing else.
Two, however, have a single target combining mtrace with something
else. In the case of libio/tst-fopenloc.check, the test both compares
the output with an expected baseline and runs mtrace. In the case of
posix/tst-rxspencer-mem, the test is run (with different command line
from the main run) and then mtrace is run, from the same makefile
target.
This patch splits both of these tests up to use separate makefile
targets for each thing tested; in the tst-rxspencer case, a file
tst-rxspencer-no-utf8.c is created that just includes tst-rxspencer.c,
as is usual for tests where the same code gets tested in different
compile-time or runtime configurations.
Adding $(evaluate-test) to test commands, as in
<https://sourceware.org/ml/libc-alpha/2014-01/msg00194.html>, will no
longer need to insert && between multiple commands, as all tests will
either have just a single command or already use &&.
Tested x86_64.
* libio/Makefile ($(objpfx)tst-fopenloc.check): Split into
separate $(objpfx)tst-fopenloc-cmp.out and
$(objpfx)tst-fopenloc-mem.out targets.
(tests): Update dependencies.
* posix/Makefile (tests variable): Add tst-rxspencer-no-utf8.
(generated): Change tst-rxspencer-mem and tst-rxspencer.mtrace to
tst-rxspencer-no-utf8-mem and tst-rxspencer-no-utf8.mtrace.
(tst-rxspencer-no-utf8-ARGS): New variable.
(tst-rxspencer-no-utf8-ENV): Likewise.
(tests target): Depend on $(objpfx)tst-rxspencer-no-utf8-mem
instead of $(objpfx)tst-rxspencer-mem.
($(objpfx)tst-rxspencer-mem): Change target to
$(objpfx)tst-rxspencer-no-utf8-mem. Depend on
$(objpfx)tst-rxspencer-no-utf8.out instead of running test program.
* posix/tst-rxspencer-no-utf8.c: New file.
This patch cleans up cases of __USE_MISC that are trivially redundant
after the recent substitution of __USE_MISC for __USE_BSD and
__USE_SVID: either in constructs such as "defined __USE_MISC ||
defined __USE_MISC", or else (in the bits/mman.h case) a conditional
on __USE_MISC nested inside another __USE_MISC conditional. (The
cleanups remaining after this patch are still quite large, but it
seems a reasonable piece to separate out.)
Tested x86_64.
* bits/mman.h [__USE_MISC]: Remove redundant conditionals.
* ctype/ctype.h [__USE_MISC]: Likewise.
* dirent/dirent.h [__USE_MISC]: Likewise.
* grp/grp.h [__USE_MISC]: Likewise.
* io/fcntl.h [__USE_MISC]: Likewise.
* io/sys/stat.h [__USE_MISC]: Likewise.
* libio/stdio.h [__USE_MISC]: Likewise.
* posix/unistd.h [__USE_MISC]: Likewise.
* pwd/pwd.h [__USE_MISC]: Likewise.
* stdlib.h [__USE_MISC]: Likewise.
* string/bits/string2.h [__USE_MISC]: Likewise.
* string/string.h [__USE_MISC]: Likewise.
* time/time.h [__USE_MISC]: Likewise.
ftell tries to avoid flushing the buffer when it is in write mode by
converting the wide char data and placing it into the binary buffer.
If the output buffer space is full and there is data to write, the
code reverts to flushing the buffer. This breaks when there is space
in the buffer but it is not enough to convert the next character in
the wide data buffer, due to which __codecvt_do_out returns a
__codecvt_partial status. In this case, ftell keeps running in an
infinite loop.
The fix here is to detect the __codecvt_partial status in addition to
checking if the buffer is full. I have also added a test case that
demonstrates the infinite loop.
Partially revert commits 2b766585f9 and
de2fd463b1, which were intended to fix BZ#11741
but caused another, likely worse bug, namely that fwrite() and fputs() could,
in an error path, read data beyond the end of the specified buffer, and
potentially even write this data to the file.
Fix BZ#11741 properly by checking the return value from _IO_padn() in
stdio-common/vfprintf.c.
Fixes 15381.
Using wide character function is on byte oriented memstream is undefined
behaviour. This behaviour was masked by not initializing wide struct
info. We now initialize it to cause a predictable crash.
In BZ #12724, partial support for POSIX 2008 fclose behavior was added.
Since it isn't entirely conforming to the spec, some applications are
known to be breaking in this intermediate state. So revert the partial
support until we can get things fully implemented.
This reverts commit fcabc0f8b1.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
[BZ #14543]
Set the internal buffer state correctly whenever the external buffer
state is modified by fseek by either computing the current
_IO_read_ptr/end for the internal buffer based on the new _IO_read_ptr
in the external buffer or converting the content read into the
external buffer, up to the extent of the requested fseek offset.
[BZ #11959]
* libio/stdio.h (fwrite, fwrite_unlocked): Remove __wur.
It is not necessarily an error to ignore fwrite's return
value. One can reliably use ferror to test for errors after
the fact.
fopen should set the FD_CLOEXEC flag if requested evenif the kernel does
not support an aotmic operation.
freopen should reuse the file descriptor for the stream. This is
especially important for calls to change the standard streams (stin,
stdout, stderr).
* libio/wfileops.c (_IO_wfile_underflow): Fix handling of
incomplete characters at end of input buffer.
* libio/Makefile (tests): Add tst-fgetwc.
* libio/tst-fgetwc.c: New file.
* libio/tst-fgetwc.input: New file.
* libio/fmemopen.c: Implement binary mode. In this mode no NUL
byte gets added to writes and seeks from the end use the length of
the buffer and not the currently terminating NUL byte.
file descriptors with close-on-exec set.
(exec_comm_child): Fix the case where the write end of the pipe is
STDOUT_FILENO already. In case it is, clear close-on-exec.
* time/tzset.c (tzset_internal): Break TZ string parsing out into
__tzset_parse_tz and updating of daylight, timezone, tzname into
update_vars.
(__tz_compute): Renamed from tz_compute. Take additional parameters.
(__tz_convert): Updating of tm_isdst, tm_zone, and tm_gmtoff now
happens in __tz_compute.
* time/tzfile.c (__tzfile_read): Also read TZ string.
(find_transition): Fold into __tzfile_compute.
(__tzfile_compute): For times beyond the last transition try to
use the TZ string.
* timezone/tst-timezone.c: Information in daylight and tzname does
change for Asia/Tokyo timezone with more concrete information.
Remove the test.
* include/stdio.h: Add libc_hidden_proto for ftello.
* libio/ftello.c: Add libc_hidden_def.
with __warning__/__error__ attributes.
(__warnattr): Define.
* stdlib/bits/stdlib.h (__realpath_chk_warn, __ptsname_r_chk_warn,
__mbstowcs_chk_warn, __wcstombs_chk_warn): New aliases with
__warnattr.
(realpath, ptsname_r, mbstowcs, wcstombs): Call __*_chk_warn instead
of __*_chk if compile time detectable overflow is found.
* libio/bits/stdio2.h (__fgets_chk_warn, __fread_chk_warn,
__fgets_unlocked_chk_warn, __fread_unlocked_chk_warn): New aliases
with __warnattr.
(fgets, fread, fgets_unlocked, fread_unlocked): Call __*_chk_warn
instead of __*_chk if compile time detectable overflow is found.
(__gets_alias): Rename to...
(__gets_warn): ... this. Add __warnattr.
(gets): Call __gets_warn instead of __gets_alias.
* socket/bits/socket2.h (__recv_chk_warn, __recvfrom_chk_warn): New
aliases with __warnattr.
(recv, recvfrom): Call __*_chk_warn instead of __*_chk if compile
time detectable overflow is found.
* posix/bits/unistd.h (__read_chk_warn, __pread_chk_warn,
__pread64_chk_warn, __readlink_chk_warn, __readlinkat_chk_warn,
__getcwd_chk_warn, __confstr_chk_warn, __getgroups_chk_warn,
__ttyname_r_chk_warn, __getlogin_r_chk_warn, __gethostname_chk_warn,
__getdomainname_chk_warn): New aliases with __warnattr.
(read, pread, pread64, readlink, readlinkat, getcwd, confstr,
getgroups, ttyname_r, getlogin_r, gethostname, getdomainname): Call
__*_chk_warn instead of __*_chk if compile time detectable overflow
is found.
(__getgroups_chk): Rename argument to __listlen from listlen.
(__getwd_alias): Rename to...
(__getwd_warn): ... this. Add __warnattr.
(getwd): Call __getwd_warn instead of __getwd_alias.
* wcsmbs/bits/wchar2.h (__wmemcpy_chk_warn, __wmemmove_chk_warn,
__wmempcpy_chk_warn, __wmemset_chk_warn, __wcsncpy_chk_warn,
__wcpncpy_chk_warn, __fgetws_chk_warn, __fgetws_unlocked_chk_warn,
__mbsrtowcs_chk_warn, __wcsrtombs_chk_warn, __mbsnrtowcs_chk_warn,
__wcsnrtombs_chk_warn): New aliases with __warnattr.
(wmemcpy, wmemmove, wmempcpy, wmemset, mbsrtowcs, wcsrtombs,
mbsnrtowcs, wcsnrtombs): Call __*_chk_warn instead of __*_chk if
compile time detectable overflow is found.
(wcsncpy, wcpncpy): Likewise. For constant __n fix check whether
to use __*_chk or not.
(fgetws, fgetws_unlocked): Divide __bos by sizeof (wchar_t), both
in comparisons which function should be called and in __*_chk*
arguments. Call __*_chk_warn instead of __*_chk if compile time
detectable overflow is found.
(swprintf, vswprintf): Divide __bos by sizeof (wchar_t) in
__*_chk argument.
* debug/tst-chk1.c (do_test): Add a few more tests.
* misc/bits/syslog.h (syslog): When __va_arg_pack is defined,
implement as __extern_always_inline function.
(vsyslog): Define as __extern_always_inline function unconditionally.
* libio/bits/stdio2.h (sprintf, snprintf, printf, fprintf):
When __va_arg_pack is defined, implement as __extern_always_inline
functions.
(vsprintf, vsnprintf, vprintf, vfprintf): Define as
__extern_always_inline functions unconditionally.
* libio/bits/stdio.h (vprintf): Ifdef out the inline when
bits/stdio2.h will be included.
* wcsmbs/bits/wchar2.h (__swprintf_alias): New redirect.
(swprintf, wprintf, fwprintf): When __va_arg_pack is defined,
implement as __extern_always_inline functions.
(vswprintf, vwprintf, vfwprintf): Define as
__extern_always_inline functions unconditionally.
* debug/tst-chk1.c (do_test): Enable remaining tests for C++.
2007-09-03 Jakub Jelinek <jakub@redhat.com>
* misc/sys/cdefs.h (__extern_inline, __extern_always_inline): Only
define in C++ for GCC 4.3+, in C++ always use __gnu_inline__
attribute.
* include/features.h (__USE_EXTERN_INLINES): Define only when
__extern_inline is defined.
* stdlib/stdlib.h: Include bits/stdlib.h when __extern_always_inline
is defined instead of when not __cplusplus.
* misc/sys/syslog.h: Include bits/syslog.h when __extern_always_inline
is defined instead of when not __cplusplus.
* socket/sys/socket.h: Include bits/socket2.h when
__extern_always_inline is defined instead of when not __cplusplus.
* libio/stdio.h: Include bits/stdio2.h when __extern_always_inline
is defined instead of when not __cplusplus.
* posix/unistd.h: Include bits/unistd.h when __extern_always_inline
is defined instead of when not __cplusplus.
* string/string.h: Include bits/string3.h when __extern_always_inline
is defined instead of when not __cplusplus.
* wcsmbs/wchar.h: Include bits/wchar2.h when __extern_always_inline
is defined instead of when not __cplusplus.
(btowc, wctob): Don't guard the inlines with ifndef __cplusplus.
* io/fcntl.h: Don't include bits/fcntl2.h if __extern_always_inline
is not defined.
* misc/bits/syslog-ldbl.h: Guard *_chk stuff with
defined __extern_always_inline instead of !defined __cplusplus.
* libio/bits/stdio-ldbl.h: Likewise.
* wcsmbs/bits/wchar-ldbl.h: Likewise.
* misc/bits/syslog.h (syslog): Don't define for C++.
(vsyslog): Use __extern_always_inline function for C++ instead of
a macro.
* libio/bits/stdio.h (__STDIO_INLINE): Define to __extern_inline
whenever that macro is defined.
(vprintf): Don't provide the inline for C++.
(fread_unlocked, fwrite_unlocked): Don't define the macros for C++.
* libio/bits/stdio2.h (sprintf, snprintf, printf, fprintf): Don't
define the macros for C++.
(vsprintf, vsnprintf, vprintf, vfprintf): Define as
__extern_always_inline functions for C++.
* io/sys/stat.h (stat, lstat, fstat, fstatat, mknod, mknodat,
stat64, lstat64, fstat64, fstatat64): Don't define if not
__USE_EXTERN_INLINES.
* wcsmbs/bits/wchar2.h: Fix #error message.
(swprintf, wprintf, fwprintf): Don't define the macros for C++.
(vswprintf, vwprintf, vfwprintf): Define using
__extern_always_inline functions for C++.
* string/bits/string3.h: Don't #undef macros if __cplusplus.
(memcpy, memmove, mempcpy, memset, bcopy, bzero, strcpy, stpcpy,
strncpy, strcat, strncat): Define as __extern_always_inline
functions instead of macros for C++.
* math/bits/cmathcalls.h: Guard __extern_inline routines with
defined __extern_inline.
* sysdeps/alpha/fpu/bits/mathinline.h (__MATH_INLINE): Define
to __extern_inline whenever that macro is defined.
* sysdeps/ia64/fpu/bits/mathinline.h (__MATH_INLINE): Likewise.
* sysdeps/i386/fpu/bits/mathinline.h (__MATH_INLINE): Likewise.
* sysdeps/i386/i486/bits/string.h (__STRING_INLINE): Likewise.
* sysdeps/s390/bits/string.h (__STRING_INLINE): Likewise.
* sysdeps/s390/fpu/bits/mathinline.h (__MATH_INLINE): Likewise.
* sysdeps/powerpc/fpu/bits/mathinline.h (__MATH_INLINE): Likewise.
* sysdeps/x86_64/fpu/bits/mathinline.h (__MATH_INLINE): Likewise.
* sysdeps/sparc/fpu/bits/mathinline.h (__MATH_INLINE): Likewise.
* sysdeps/unix/sysv/linux/sys/sysmacros.h (gnu_dev_major,
gnu_dev_minor, gnu_dev_makedev): Remove __extern_inline from
prototypes. Only provide __extern_inline routines if
__USE_EXTERN_INLINES.
* debug/Makefile: Add rules to build and run tst-{,lfs}chk{4,5,6}
tests.
* debug/tst-chk1.c (do_prepare, do_test): Allow compilation as C++.
For now avoid some *printf tests in C++. Skip all testing
if __USE_FORTIFY_LEVEL is defined, but __extern_always_inline macro
is not.
* debug/tst-chk4.cc: New file.
* debug/tst-chk5.cc: New file.
* debug/tst-chk6.cc: New file.
* debug/tst-lfschk4.cc: New file.
* debug/tst-lfschk5.cc: New file.
* debug/tst-lfschk6.cc: New file.
* include/wchar.h (__vfwprintf_chk, __vswprintf_chk): Avoid
prototypes in C++.
* include/stdio.h (__sprintf_chk, __snprintf_chk, __vsprintf_chk,
__vsnprintf_chk, __printf_chk, __fprintf_chk, __vprintf_chk,
__vfprintf_chk, __fgets_unlocked_chk, __fgets_chk): Likewise.
* iconv/gconv_cache.c (__gconv_lookup_cache): Return __GCONV_NULCONV
if from and to charsets are the same.
* iconv/gconv_db.c (__gconv_find_transform): Likewise.
* intl/dcigettext.c (_nl_find_msg): Return NULL even if __gconv_open
returns __GCONV_NOCONV, but not for __GCONV_NULCONV.
2007-07-17 Jakub Jelinek <jakub@redhat.com>
* wcsmbs/wchar.h: Only define wint_t if __need_wint_t.
Don't define wint_t when __need_mbstate_t unless it
is necessary.
(__mbstate_t): Use __WINT_TYPE__ rather than wint_t
in the typedef if possible.
* wctype/wctype.h (wint_t): Define by including
wchar.h with __need_wint_t instead of including stddef.h
with __need_wint_t and as fallback definining it ourselves.
* iconv/gconv.h (__need_wint_t): Define before including
wchar.h.
* sysdeps/gnu/_G_config.h: Don't include gconv.h if not _LIBC
or _GLIBCPP_USE_WCHAR_T.
(__need_wchar_t): Don't define
if not _LIBC or _GLIBCPP_USE_WCHAR_T.
(__need_wint_t): Don't define before including stddef.h,
define before including wchar.h only if _LIBC or
_GLIBCPP_USE_WCHAR_T.
(_G_iconv_t): Don't define if not _LIBC or _GLIBCPP_USE_WCHAR_T.
* sysdeps/mach/hurd/_G_config.h: Likewise.
* sysdeps/generic/_G_config.h: Likewise.
* libio/libio.h (__wunderflow, __wuflow, __woverflow): Only
prototype if _LIBC or _GLIBCPP_USE_WCHAR_T.
(_IO_getwc_unlocked, _IO_putwc_unlocked): Only define
if _LIBC or _GLIBCPP_USE_WCHAR_T.
in loop to look for conversion specifier to avoid testing of
wrong errno value.
* stdio-common/Makefile (tests): Add bug18, bug18a, bug19, bug19a.
* stdio-common/bug18a.c: New file.
* stdio-common/bug19.c: New file.
* stdio-common/bug19a.c: New file.
2006-12-13 Ulrich Drepper <drepper@redhat.com>
[BZ #2337]
* libio/Makefile (tests): Add tst-setvbuf1.
* libio/tst-setvbuf1.c: New file.
2006-12-08 Jakub Jelinek <jakub@redhat.com>
[BZ #2337]
* libio/genops.c (__uflow): Fix a typo.
* libio/wfiledoalloc.c (_IO_wfile_doallocate): Don't stat
nor set _IO_LINE_BUF bit here. Size the wide buffer based on
the narrow buffer size.
2006-11-24 Jakub Jelinek <jakub@redhat.com>
[BZ #2337]
* libio/libio.h (_IO_FLAGS2_USER_WBUF): Define.
* libio/wgenops.c (_IO_wsetb, _IO_wdefault_finish): Test and set
_IO_FLAGS2_USER_WBUF bit in _flags2 instead of _IO_USER_BUF bit
in _flags.
* libio/wstrops.c (_IO_wstr_overflow, enlarge_userbuf,
_IO_wstr_finish): Likewise.
* libio/wmemstream.c (open_wmemstream): Likewise.
* libio/fileops.c (_IO_new_file_close_it): Call _IO_set[bgp]
even for wide streams.
2006-08-14 Ulrich Drepper <drepper@redhat.com>
[BZ #1996]
* libio/memstream.c (open_memstream): Allocate initial buffer with
calloc.
* libio/wmemstream.c (open_wmemstream): Likewise.
* libio/strops.c: Pretty printing.
(_IO_str_overflow): Clear uninitialized part of the new buffer.
(enlarge_userbuf): New function.
(_IO_str_seekoff): Call it if seek position is larger than current
buffer.
* libio/wstrops.c: Likewise.
* libio/vasprintf.c: Add comment as to why we do not have to use
calloc instead of malloc to allocate initial buffer.
* libio/Makefile (tests): Add bug-memstream1 and bug-wmemstream1.
* libio/bug-memstream1.c: New file.
* libio/bug-wmemstream1.c: New file.
invalid length [Coverity CID 106].
* nss/nss_files/files-key.c (search): Close stream before
successful return [Coverity CID 107].
* io/fts.c (fts_open): Don't allocate parent if *argv==NULL
[Coverity CID 108].
* sunrpc/rpc_cout.c (inline_struct): Free sizestr after use
[Coverity CID 110, 109].
* sunrpc/rpc_scan.c (docppline): Free file string if it is not
going to be used [Coverity CID 111].
* sysdeps/unix/sysv/linux/getsourcefilter.c (getsourcefilter): Free
memory if socket level value cannot be retrieved [Coverity CID 112].
* nis/nis_clone_dir.c (nis_clone_directory): Free all memory in
error case [Coverity CID 114].
* nis/nis_clone_res.c (nis_clone_result): Free all memory in the
error cases [Coverity CID 115].
* sunrpc/rpc_parse.c (get_definition): Free defp if tok ==
TOK_EOF [Coverity CID 116].
* sysdeps/unix/sysv/linux/setsourcefilter.c (setsourcefilter): Free
memory if socket level value cannot be retrieved [Coverity CID 117].
* elf/cache.c (save_cache): Initialize pad to avoid writing
uninitialized data to disk.
* elf/cache.c (save_cache): Free file_entries_new [Coverity CID 118].
* intl/finddomain.c (_nl_find_domain): Avoid strdup of expand
locale name, use strdupa. Remove free call [Coverity CID 119].
* sunrpc/rpc_main.c (generate_guard): Avoid extra allocation and
the resulting leak [Coverity CID 121].
* sunrpc/rpc_main.c (mkfile_output): Free all allocated memory
[Coverity CID 122].
* sunrpc/rpc_main.c (h_output): Free guard after we are done
[Coverity CID 123].
* sunrpc/svc_udp.c (cache_set): Free victim if newbuf allocation
fails [Coverity CID 126].
* sunrpc/svc_udp.c (svcudp_enablecache): Free memory in error
cases [Coverity CID 127].
* nis/nis_table.c (__create_ib_request): Free ibreq in case strdup
fails [Coverity CID 128].
* nis/nis_getservlist.c (nis_getservlist): Free all memory in case
of an error [Coverity CID 130, 129].
* nis/nis_print_group_entry.c (nis_print_group_entry): If
nis_lookup call failed, return. Free lookup result in error
cases [Coverity CID 131].
* nis/nis_removemember.c (nis_removemember): Free all memory in
error cases [Coverity CID 132].
* nis/nss_nisplus/nisplus-alias.c (_nss_nisplus_getaliasbyname_r):
Always free lookup result [Coverity CID 134].
* nis/nss_nisplus/nisplus-ethers.c (_nss_nisplus_gethostton_r):
Always free lookup result [Coverity CID 135].
* nis/nss_nisplus/nisplus-ethers.c (_nss_nisplus_getntohost_r):
Always free lookup result [Coverity CID 136].
* nis/nss_nisplus/nisplus-network.c (_nss_nisplus_getnetbyaddr_r):
Before retrying, free old result [Coverity CID 137].
* nis/nss_nisplus/nisplus-publickey.c (_nss_nisplus_netname2user):
Free res in case UID is zero [Coverity CID 138].
* nis/ypclnt.c (yp_update): Always free master string
[Coverity CID 140].
* nis/nis_creategroup.c (nis_creategroup): Free all memory in
error cases [Coverity CID 143, 142, 141].
* nis/nss_nis/nis-publickey.c (_nss_nis_getpublickey): Free result
if yp_match call succeeded [Coverity CID 155].
* nis/nss_nis/nis-publickey.c (_nss_nis_getsecretkey): Free string
allocated in yp_match at all times [Coverity CID 157, 156].
* nscd/nscd.c (write_pid): Close stream also if writing failed
[Coverity CID 165].
* nis/nis_table.c (nis_add_entry): Move test for NULL parameter
ahead of first use [Coverity CID 167].
* nis/nss_nis/nis-alias.c (_nss_nis_getaliasbyname_r): Move test
for NULL parameter ahead of first use [Coverity CID 168].
* intl/finddomain.c (_nl_find_domain): We never return NULL if we
found the locale [Coverity CID 169].
* inet/getnameinfo.c (getnameinfo): __getservbyport_r does not set
herrno [Coverity CID 178].
* nis/nis_checkpoint.c (nis_checkpoint): Don't access and returned
freed object [Coverity CID 182].
* io/openat.c (__openat): Define instead of openat.
Use libc_hidden_def. Define openat with weak_alias.
* io/openat64.c (__openat64): Define instead of openat64.
Use libc_hidden_def. Define openat64 with weak_alias.
* sysdeps/unix/sysv/linux/openat.c: Likewise.
* libio/genops.c: Include <sched.h> for __sched_yield decl.
2006-01-18 Ulrich Drepper <drepper@redhat.com>
[BZ #2173]
* libio/fileops.c (_IO_new_file_fopen): If ,ccs= is given, also
set vtable to the wide vtable.
* libio/tst-fopenloc2.c: New file.
* libio/Makefile (tests): Add tst-fopenloc2.
* sysdeps/unix/sysv/linux/shm_open.c [__ASSUME_TMPFS_NAME]
prototype.
(nexttowardf): Redirect to __nldbl_nexttowardf.
(nexttoward): Redirect to nextafter.
(__MATHDECL_2, __MATHDECL_1): Redirect *l functions to
non-*l versions if __LONG_DOUBLE_MATH_OPTIONAL and
__NO_LONG_DOUBLE_MATH.
* math/complex.h (__MATHDECL_1): Likewise.
* math/bits/mathcalls.h (nexttoward): Don't prototype if
__LDBL_COMPAT.
* misc/sys/cdefs.h: Include <bits/wordsize.h>.
(__LDBL_COMPAT, __LDBL_REDIR1, __LDBL_REDIR, __LDBL_REDIR1_NTH,
__LDBL_REDIR_NTH, __LDBL_REDIR_DECL): New macros.
* libio/bits/stdio-ldbl.h: New file.
* libio/Makefile (headers): Add it.
* libio/stdio.h [__LDBL_COMPAT]: #include it.
* libio/bits/libio-ldbl.h: New file.
* libio/Makefile (headers): Add it.
* libio/libio.h [__LDBL_COMPAT]: #include it.
* libio/libioP.h: Include <math_ldbl_opt.h>.
* include/wchar.h (__fwprintf, __vfwprintf): Fix commented out
attribute.
(__vfwprintf_chk): New prototype. Add libc_hidden_proto.
* wcsmbs/bits/wchar-ldbl.h: New file.
* wcsmbs/Makefile (headers): Add it.
* wcsmbs/wchar.h [__LDBL_COMPAT]: #include it.
* wcsmbs/bits/wchar2.h (__vswprintf_alias): Removed.
(vswprintf): Define as a macro rather than inline function.
* stdio-common/bits/printf-ldbl.h: New file.
* stdio-common/Makefile (headers): Add it.
* stdio-common/printf.h [__LDBL_COMPAT]: #include it.
* libio/fwprintf.c: Include libioP.h.
(fwprintf): Use ldbl_weak_alias instead of weak_alias.
* libio/fwscanf.c: Include libioP.h.
(fwscanf): Rename to __fwscanf and add ldbl_strong_alias.
* libio/iovdprintf.c (vdprintf): Use ldbl_weak_alias instead of
weak_alias.
* libio/iovsprintf.c (_IO_vsprintf): Rename to __IO_vsprintf,
add ldbl_strong_alias and use INTDEF2 instead of INTDEF.
(vsprintf): Use ldbl_weak_alias instead of weak_alias.
* libio/iovsscanf.c (__vsscanf, vsscanf): Use ldbl_weak_alias
instead of weak_alias.
* libio/iovswscanf.c (vswscanf): Rename to __vswscanf,
add ldbl_strong_alias and use ldbl_hidden_def instead of
libc_hidden_def.
* libio/obprintf.c (obstack_printf, obstack_vprintf): Use
ldbl_weak_alias instead of weak_alias.
* libio/swprintf.c: Include libioP.h.
(swprintf): Rename to __swprintf and add ldbl_strong_alias.
* libio/swscanf.c: Include libioP.h.
(swscanf): Rename to __swscanf and add ldbl_strong_alias.
* libio/vasprintf.c (vasprintf): Use ldbl_weak_alias instead of
weak_alias.
* libio/vscanf.c (vscanf): Use ldbl_weak_alias instead of
weak_alias.
* libio/vsnprintf.c (__vsnprintf, vsnprintf): Use ldbl_weak_alias
instead of weak_alias.
* libio/vswprintf.c (__vswprintf): Remove alias.
(vswprintf): Use ldbl_weak_alias instead of weak_alias.
* libio/vwprintf.c: Include libioP.h.
(vwprintf): Rename to __vwprintf and add ldbl_strong_alias.
* libio/vwscanf.c (vwscanf): Rename to __vwscanf and add
ldbl_strong_alias.
* libio/wprintf.c: Include libioP.h.
(wprintf): Rename to __wprintf and add ldbl_strong_alias.
* libio/wscanf.c: Include libioP.h.
(wscanf): Rename to __wscanf and add ldbl_strong_alias.
* stdio-common/asprintf.c (__asprintf): Rename to ___asprintf, add
ldbl_strong_alias and use INTDEF2 instead of INTDEF.
(asprintf): Use ldbl_weak_alias instead of weak_alias.
* stdio-common/dprintf.c (dprintf): Rename to __dprintf, add
ldbl_strong_alias and use ldbl_hidden_def instead of
libc_hidden_def.
* stdio-common/fprintf.c: Include libioP.h.
(fprintf): Rename to __fprintf, add ldbl_strong_alias and
use ldbl_hidden_def instead of libc_hidden_def.
(_IO_fprintf): Use ldbl_weak_alias instead of weak_alias.
* stdio-common/fscanf.c: Include libioP.h.
(fscanf): Rename to __fscanf and add ldbl_strong_alias.
* stdio-common/printf.c: Include libioP.h.
(printf): Rename to __printf and add ldbl_strong_alias.
(_IO_printf): Use ldbl_strong_alias instead of strong_alias.
* stdio-common/printf_fp.c (__printf_fp): Rename to __printf_fp, add
ldbl_strong_alias and use ldbl_hidden_def instead of
libc_hidden_def.
* stdio-common/printf_size.c (printf_size): Rename to __printf_size
and add ldbl_strong_alias.
* stdio-common/scanf.c (scanf): Rename to __scanf and add
ldbl_strong_alias.
* stdio-common/snprintf.c (snprintf): Use ldbl_weak_alias instead of
weak_alias.
* stdio-common/sprintf.c (sprintf): Rename to __sprintf, add
ldbl_strong_alias and use ldbl_hidden_def instead of
libc_hidden_def.
(_IO_sprintf): Use ldbl_strong_alias instead of strong_alias.
* stdio-common/sscanf.c: Include libioP.h instead of iolibio.h.
(sscanf): Rename to __sscanf and add ldbl_strong_alias.
* stdio-common/vfprintf.c (vfprintf): Define to
_IO_vfprintf_internal. Use ldbl_strong_alias instead. Use
ldbl_hidden_def instead of libc_hidden_def.
(_IO_vfprintf_internal): Clear is_long_double if __ldbl_is_dbl,
handle the argument as double if it is non-zero.
(vfwprintf): Use ldbl_weak_alias instead of weak_alias.
(_IO_vfprintf): Add ldbl_strong_alias.
* stdio-common/vfscanf.c (_IO_vfscanf): Rename to
_IO_vfscanf_internal, don't use strtold if __ldbl_is_dbl, add
ldbl_strong_alias.
(vfwscanf): Use ldbl_weak_alias instead of weak_alias.
(__vfscanf): Rename to ___vfscanf, add ldbl_strong_alias and
use ldbl_hidden_def instead of libc_hidden_def.
(vfscanf): Use ldbl_weak_alias instead of weak_alias.
* stdio-common/vprintf.c: Include libioP.h.
(vprintf): Rename to __vprintf and add ldbl_strong_alias.
* debug/fprintf_chk.c (__fprintf_chk): Rename to ___fprintf_chk
and add ldbl_strong_alias.
* debug/printf_chk.c (__printf_chk): Rename to ___printf_chk
and add ldbl_strong_alias.
* debug/snprintf_chk.c: Include libioP.h.
(__snprintf_chk): Rename to ___snprintf_chk and add ldbl_strong_alias.
* debug/sprintf_chk.c: Include libioP.h.
(__sprintf_chk): Rename to ___sprintf_chk and add ldbl_strong_alias.
* debug/vfprintf_chk.c (__vfprintf_chk): Rename to ___vfprintf_chk,
add ldbl_strong_alias and use ldbl_hidden_def instead of
libc_hidden_def.
* debug/vfwprintf_chk.c (__vfwprintf_chk): Add libc_hidden_def.
* debug/vprintf_chk.c (__vprintf_chk): Rename to ___vprintf_chk
and add ldbl_strong_alias.
* debug/vsnprintf_chk.c (__vsnprintf_chk): Rename to ___vsnprintf_chk,
add ldbl_strong_alias and use ldbl_hidden_def instead of
libc_hidden_def.
* debug/vsprintf_chk.c (__vsprintf_chk): Rename to ___vsprintf_chk,
add ldbl_strong_alias and use ldbl_hidden_def instead of
libc_hidden_def.
* stdlib/stdlib.h (strtold): Don't define inline if [!__LDBL_COMPAT].
* wcsmbs/wchar.h (wcstold): Likewise.
* stdlib/strtod_l.c: Include math_ldbl_opt.h.
(____STRTOF_INTERNAL): Define.
(INTERNAL (__STRTOF)): Rename to ____STRTOF_INTERNAL.
(__STRTOF): Call ____STRTOF_INTERNAL instead.
[LONG_DOUBLE_COMPAT] (strtold_l, wcstold_l, __strtold_l, __wcstold_l):
Add compatibility symbols.
* stdlib/strtod.c: Include math_ldbl_opt.h.
[LONG_DOUBLE_COMPAT] (strtold, wcstold, __strtold_internal,
__wcstold_internal): Add compatibility symbols.
* stdlib/strtold.c: Include bits/wordsize.h, wchar.h.
(NEW, NEW1): Define.
(__new_strtold, __new_wcstold): New prototypes.
(____new_strtold_internal, ____new_wcstold_internal): Likewise.
Add libc_hidden_proto.
(STRTOF): Define to NEW (*told).
[__LONG_DOUBLE_MATH_OPTIONAL] (wcstold, strtold): Add
long_double_symbol.
[__LONG_DOUBLE_MATH_OPTIONAL] (__wcstold_internal,
__strtold_internal): Likewise. Add libc_hidden_ver.
* stdlib/bits/stdlib-ldbl.h: New file.
* stdlib/Makefile (headers): Add it.
* stdlib/stdlib.h [__LDBL_COMPAT]: #include it.
* include/stdlib.h (ecvt_r, fcvt_r, qecvt_r, qfcvt_r): Remove
libc_hidden_proto.
(__ecvt, __fcvt, __gcvt, __ecvt_r, __fcvt_r, __qecvt, __qfcvt,
__qgcvt, __qecvt_r, __qfcvt_r): New prototypes.
* misc/efgcvt_r.c: Include shlib-compat.h.
(LONG_DOUBLE_CVT): Define.
(__APPEND, __APPEND2): Define.
(*fcvt_r): Use __APPEND instead of APPEND. Remove libc_hidden_def.
(*ecvt_r): Likewise.
(cvt_symbol): Define. Use it on fcvt_r and ecvt_r.
* misc/efgcvt.c: Include shlib-compat.h.
(LONG_DOUBLE_CVT): Define.
(__APPEND, __APPEND2): Define.
(fcvt): Use __APPEND instead of APPEND. Remove libc_hidden_def.
(ecvt, gcvt): Likewise.
(cvt_symbol): Define. Use it on fcvt, ecvt and gcvt.
* stdlib/bits/monetary-ldbl.h: New file.
* stdlib/Makefile (headers): Add it.
* stdlib/monetary.h [__LDBL_COMPAT]: #include it.
* stdlib/strfmon.c: Include math_ldbl_opt.h.
(strfmon): Rename to __strfmon and add ldbl_strong_alias.
* stdlib/strfmon_l.c: Remove all traces of [!USE_IN_LIBIO].
(__vstrfmon_l): Don't set is_long_double if __ldbl_is_dbl.
(__strfmon_l): Rename to ___strfmon_l and add ldbl_strong_alias.
(strfmon_l): Use ldbl_weak_alias instead of weak_alias.
* misc/bits/syslog-ldbl.h: New file.
* misc/Makefile (headers): Add it.
* misc/sys/syslog.h [__LDBL_COMPAT]: #include it.
* misc/syslog.c: Include math_ldbl_opt.h.
(syslog): Rename to __syslog and add ldbl_strong_alias,
use ldbl_hidden_def instead of libc_hidden_def.
(vsyslog): Rename to __vsyslog and add ldbl_strong_alias,
use ldbl_hidden_def instead of libc_hidden_def.
* sysdeps/generic/math_ldbl_opt.h: New file.
* math/w_j1l.c (j1l, y1l): Rename to __ prefixed variants.
Add weak_alias.
* math/w_j0l.c (j0l, y0l): Likewise.
* math/w_jnl.c (jnl, ynl): Likewise.
* sysdeps/ieee754/ldbl-96/s_nexttoward.c
(__nexttowardl): Remove strong_alias.
(nexttowardl): Remove weak_alias.
* sysdeps/ieee754/ldbl-96/s_erfl.c
(__erfl, __erfcl): Remove strong_alias.
(erfl, erfcl): Remove weak_alias.
* sysdeps/ieee754/ldbl-64-128/s_asinhl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_atanl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_cbrtl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_ceill.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_copysignl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_cosl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_erfl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_expm1l.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_fabsl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_finitel.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_floorl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_fpclassifyl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_frexpl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_ilogbl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_isinfl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_isnanl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_llrintl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_llroundl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_log1pl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_logbl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_lrintl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_lroundl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_modfl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_nearbyintl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_nextafterl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_nexttoward.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_nexttowardf.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_nexttowardfd.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_remquol.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_rintl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_roundl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_scalblnl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_scalbnl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_signbitl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_sincosl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_sinl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_tanhl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_tanl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_truncl.c: New file.
* sysdeps/ieee754/ldbl-64-128/strtold_l.c: New file.
* sysdeps/ieee754/ldbl-64-128/w_expl.c: New file.
* sysdeps/ieee754/ldbl-opt/configure.in: New file.
* sysdeps/ieee754/ldbl-opt/configure: New file.
* sysdeps/ieee754/ldbl-opt/Makefile: New file.
* sysdeps/ieee754/ldbl-opt/Versions: New file.
* sysdeps/ieee754/ldbl-opt/cabs.c: New file.
* sysdeps/ieee754/ldbl-opt/cabsl.c: New file.
* sysdeps/ieee754/ldbl-opt/carg.c: New file.
* sysdeps/ieee754/ldbl-opt/cargl.c: New file.
* sysdeps/ieee754/ldbl-opt/cimag.c: New file.
* sysdeps/ieee754/ldbl-opt/cimagl.c: New file.
* sysdeps/ieee754/ldbl-opt/conj.c: New file.
* sysdeps/ieee754/ldbl-opt/conjl.c: New file.
* sysdeps/ieee754/ldbl-opt/creal.c: New file.
* sysdeps/ieee754/ldbl-opt/creall.c: New file.
* sysdeps/ieee754/ldbl-opt/math_ldbl_opt.c: New file.
* sysdeps/ieee754/ldbl-opt/math_ldbl_opt.h: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-acos.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-acosh.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-asin.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-asinh.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-asprintf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-atan.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-atan2.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-atanh.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-cabs.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-cacos.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-cacosh.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-carg.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-casin.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-casinh.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-catan.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-catanh.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-cbrt.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-ccos.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-ccosh.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-ceil.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-cexp.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-cimag.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-clog.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-clog10.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-compat.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-compat.h: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-conj.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-copysign.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-cos.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-cosh.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-cpow.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-cproj.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-creal.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-csin.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-csinh.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-csqrt.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-ctan.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-ctanh.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-dprintf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-drem.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-erf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-erfc.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-exp.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-exp10.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-exp2.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-expm1.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-fabs.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-fdim.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-finite.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-floor.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-fma.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-fmax.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-fmin.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-fmod.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-fprintf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-fprintf_chk.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-frexp.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-fscanf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-fwprintf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-fwprintf_chk.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-fwscanf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-gamma.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-hypot.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-ilogb.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-iovfscanf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-isinf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-isnan.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-j0.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-j1.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-jn.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-ldexp.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-lgamma.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-lgamma_r.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-llrint.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-llround.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-log.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-log10.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-log1p.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-log2.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-logb.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-lrint.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-lround.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-modf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-nan.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-nearbyint.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-nextafter.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-nexttoward.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-nexttowardf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-obstack_printf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-obstack_vprintf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-pow.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-pow10.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-printf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-printf_chk.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-printf_fp.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-printf_size.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-qecvt.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-qecvt_r.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-qfcvt.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-qfcvt_r.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-qgcvt.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-remainder.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-remquo.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-rint.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-round.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-scalb.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-scalbln.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-scalbn.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-scanf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-signbit.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-significand.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-sin.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-sincos.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-sinh.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-snprintf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-snprintf_chk.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-sprintf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-sprintf_chk.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-sqrt.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-sscanf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-strfmon.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-strfmon_l.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-strtold.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-strtold_l.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-strtoldint.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-swprintf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-swprintf_chk.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-swscanf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-syslog.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-syslog_chk.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-tan.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-tanh.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-tgamma.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-trunc.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vasprintf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vdprintf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vfprintf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vfprintf_chk.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vfscanf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vfwprintf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vfwprintf_chk.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vfwscanf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vprintf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vprintf_chk.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vscanf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vsnprintf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vsnprintf_chk.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vsprintf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vsprintf_chk.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vsscanf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vswprintf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vswprintf_chk.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vswscanf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vsyslog.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vsyslog_chk.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vwprintf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vwprintf_chk.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vwscanf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-wcstold.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-wcstold_l.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-wcstoldint.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-wprintf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-wprintf_chk.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-wscanf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-y0.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-y1.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-yn.c: New file.
* sysdeps/ieee754/ldbl-opt/s_asinh.c: New file.
* sysdeps/ieee754/ldbl-opt/s_atan.c: New file.
* sysdeps/ieee754/ldbl-opt/s_cacos.c: New file.
* sysdeps/ieee754/ldbl-opt/s_cacosh.c: New file.
* sysdeps/ieee754/ldbl-opt/s_cacoshl.c: New file.
* sysdeps/ieee754/ldbl-opt/s_cacosl.c: New file.
* sysdeps/ieee754/ldbl-opt/s_casin.c: New file.
* sysdeps/ieee754/ldbl-opt/s_casinh.c: New file.
* sysdeps/ieee754/ldbl-opt/s_casinhl.c: New file.
* sysdeps/ieee754/ldbl-opt/s_casinl.c: New file.
* sysdeps/ieee754/ldbl-opt/s_catan.c: New file.
* sysdeps/ieee754/ldbl-opt/s_catanh.c: New file.
* sysdeps/ieee754/ldbl-opt/s_catanhl.c: New file.
* sysdeps/ieee754/ldbl-opt/s_catanl.c: New file.
* sysdeps/ieee754/ldbl-opt/s_cbrt.c: New file.
* sysdeps/ieee754/ldbl-opt/s_ccos.c: New file.
* sysdeps/ieee754/ldbl-opt/s_ccosh.c: New file.
* sysdeps/ieee754/ldbl-opt/s_ccoshl.c: New file.
* sysdeps/ieee754/ldbl-opt/s_ccosl.c: New file.
* sysdeps/ieee754/ldbl-opt/s_ceil.c: New file.
* sysdeps/ieee754/ldbl-opt/s_cexp.c: New file.
* sysdeps/ieee754/ldbl-opt/s_cexpl.c: New file.
* sysdeps/ieee754/ldbl-opt/s_clog.c: New file.
* sysdeps/ieee754/ldbl-opt/s_clog10.c: New file.
* sysdeps/ieee754/ldbl-opt/s_clog10l.c: New file.
* sysdeps/ieee754/ldbl-opt/s_clogl.c: New file.
* sysdeps/ieee754/ldbl-opt/s_copysign.c: New file.
* sysdeps/ieee754/ldbl-opt/s_cpow.c: New file.
* sysdeps/ieee754/ldbl-opt/s_cpowl.c: New file.
* sysdeps/ieee754/ldbl-opt/s_cproj.c: New file.
* sysdeps/ieee754/ldbl-opt/s_cprojl.c: New file.
* sysdeps/ieee754/ldbl-opt/s_csin.c: New file.
* sysdeps/ieee754/ldbl-opt/s_csinh.c: New file.
* sysdeps/ieee754/ldbl-opt/s_csinhl.c: New file.
* sysdeps/ieee754/ldbl-opt/s_csinl.c: New file.
* sysdeps/ieee754/ldbl-opt/s_csqrt.c: New file.
* sysdeps/ieee754/ldbl-opt/s_csqrtl.c: New file.
* sysdeps/ieee754/ldbl-opt/s_ctan.c: New file.
* sysdeps/ieee754/ldbl-opt/s_ctanh.c: New file.
* sysdeps/ieee754/ldbl-opt/s_ctanhl.c: New file.
* sysdeps/ieee754/ldbl-opt/s_ctanl.c: New file.
* sysdeps/ieee754/ldbl-opt/s_erf.c: New file.
* sysdeps/ieee754/ldbl-opt/s_expm1.c: New file.
* sysdeps/ieee754/ldbl-opt/s_fabs.c: New file.
* sysdeps/ieee754/ldbl-opt/s_fdim.c: New file.
* sysdeps/ieee754/ldbl-opt/s_fdiml.c: New file.
* sysdeps/ieee754/ldbl-opt/s_finite.c: New file.
* sysdeps/ieee754/ldbl-opt/s_floor.c: New file.
* sysdeps/ieee754/ldbl-opt/s_fma.c: New file.
* sysdeps/ieee754/ldbl-opt/s_fmal.c: New file.
* sysdeps/ieee754/ldbl-opt/s_fmax.c: New file.
* sysdeps/ieee754/ldbl-opt/s_fmaxl.c: New file.
* sysdeps/ieee754/ldbl-opt/s_fmin.c: New file.
* sysdeps/ieee754/ldbl-opt/s_fminl.c: New file.
* sysdeps/ieee754/ldbl-opt/s_frexp.c: New file.
* sysdeps/ieee754/ldbl-opt/s_ilogb.c: New file.
* sysdeps/ieee754/ldbl-opt/s_isinf.c: New file.
* sysdeps/ieee754/ldbl-opt/s_isnan.c: New file.
* sysdeps/ieee754/ldbl-opt/s_ldexp.c: New file.
* sysdeps/ieee754/ldbl-opt/s_ldexpl.c: New file.
* sysdeps/ieee754/ldbl-opt/s_llrint.c: New file.
* sysdeps/ieee754/ldbl-opt/s_llround.c: New file.
* sysdeps/ieee754/ldbl-opt/s_log1p.c: New file.
* sysdeps/ieee754/ldbl-opt/s_logb.c: New file.
* sysdeps/ieee754/ldbl-opt/s_lrint.c: New file.
* sysdeps/ieee754/ldbl-opt/s_lround.c: New file.
* sysdeps/ieee754/ldbl-opt/s_modf.c: New file.
* sysdeps/ieee754/ldbl-opt/s_nan.c: New file.
* sysdeps/ieee754/ldbl-opt/s_nanl.c: New file.
* sysdeps/ieee754/ldbl-opt/s_nearbyint.c: New file.
* sysdeps/ieee754/ldbl-opt/s_nextafter.c: New file.
* sysdeps/ieee754/ldbl-opt/s_remquo.c: New file.
* sysdeps/ieee754/ldbl-opt/s_rint.c: New file.
* sysdeps/ieee754/ldbl-opt/s_round.c: New file.
* sysdeps/ieee754/ldbl-opt/s_scalbln.c: New file.
* sysdeps/ieee754/ldbl-opt/s_scalbn.c: New file.
* sysdeps/ieee754/ldbl-opt/s_significand.c: New file.
* sysdeps/ieee754/ldbl-opt/s_significandl.c: New file.
* sysdeps/ieee754/ldbl-opt/s_sin.c: New file.
* sysdeps/ieee754/ldbl-opt/s_sincos.c: New file.
* sysdeps/ieee754/ldbl-opt/s_tan.c: New file.
* sysdeps/ieee754/ldbl-opt/s_tanh.c: New file.
* sysdeps/ieee754/ldbl-opt/s_trunc.c: New file.
* sysdeps/ieee754/ldbl-opt/w_acos.c: New file.
* sysdeps/ieee754/ldbl-opt/w_acosh.c: New file.
* sysdeps/ieee754/ldbl-opt/w_acoshl.c: New file.
* sysdeps/ieee754/ldbl-opt/w_acosl.c: New file.
* sysdeps/ieee754/ldbl-opt/w_asin.c: New file.
* sysdeps/ieee754/ldbl-opt/w_asinl.c: New file.
* sysdeps/ieee754/ldbl-opt/w_atan2.c: New file.
* sysdeps/ieee754/ldbl-opt/w_atan2l.c: New file.
* sysdeps/ieee754/ldbl-opt/w_atanh.c: New file.
* sysdeps/ieee754/ldbl-opt/w_atanhl.c: New file.
* sysdeps/ieee754/ldbl-opt/w_cosh.c: New file.
* sysdeps/ieee754/ldbl-opt/w_coshl.c: New file.
* sysdeps/ieee754/ldbl-opt/w_drem.c: New file.
* sysdeps/ieee754/ldbl-opt/w_dreml.c: New file.
* sysdeps/ieee754/ldbl-opt/w_exp.c: New file.
* sysdeps/ieee754/ldbl-opt/w_exp10.c: New file.
* sysdeps/ieee754/ldbl-opt/w_exp10l.c: New file.
* sysdeps/ieee754/ldbl-opt/w_fmod.c: New file.
* sysdeps/ieee754/ldbl-opt/w_fmodl.c: New file.
* sysdeps/ieee754/ldbl-opt/w_hypot.c: New file.
* sysdeps/ieee754/ldbl-opt/w_hypotl.c: New file.
* sysdeps/ieee754/ldbl-opt/w_j0.c: New file.
* sysdeps/ieee754/ldbl-opt/w_j0l.c: New file.
* sysdeps/ieee754/ldbl-opt/w_j1.c: New file.
* sysdeps/ieee754/ldbl-opt/w_j1l.c: New file.
* sysdeps/ieee754/ldbl-opt/w_jn.c: New file.
* sysdeps/ieee754/ldbl-opt/w_jnl.c: New file.
* sysdeps/ieee754/ldbl-opt/w_lgamma.c: New file.
* sysdeps/ieee754/ldbl-opt/w_lgamma_r.c: New file.
* sysdeps/ieee754/ldbl-opt/w_lgammal.c: New file.
* sysdeps/ieee754/ldbl-opt/w_lgammal_r.c: New file.
* sysdeps/ieee754/ldbl-opt/w_log.c: New file.
* sysdeps/ieee754/ldbl-opt/w_log10.c: New file.
* sysdeps/ieee754/ldbl-opt/w_log10l.c: New file.
* sysdeps/ieee754/ldbl-opt/w_log2.c: New file.
* sysdeps/ieee754/ldbl-opt/w_log2l.c: New file.
* sysdeps/ieee754/ldbl-opt/w_logl.c: New file.
* sysdeps/ieee754/ldbl-opt/w_pow.c: New file.
* sysdeps/ieee754/ldbl-opt/w_powl.c: New file.
* sysdeps/ieee754/ldbl-opt/w_remainder.c: New file.
* sysdeps/ieee754/ldbl-opt/w_remainderl.c: New file.
* sysdeps/ieee754/ldbl-opt/w_scalb.c: New file.
* sysdeps/ieee754/ldbl-opt/w_scalbl.c: New file.
* sysdeps/ieee754/ldbl-opt/w_sinh.c: New file.
* sysdeps/ieee754/ldbl-opt/w_sinhl.c: New file.
* sysdeps/ieee754/ldbl-opt/w_sqrt.c: New file.
* sysdeps/ieee754/ldbl-opt/w_sqrtl.c: New file.
* sysdeps/ieee754/ldbl-opt/w_tgamma.c: New file.
* sysdeps/ieee754/ldbl-opt/w_tgammal.c: New file.
* sysdeps/unix/sysv/linux/sparc/bits/wordsize.h: New file.
* sysdeps/unix/sysv/linux/sparc/sparc32/Implies: New file.
* sysdeps/sparc/sparc32/Implies: Move ldbl-128 first and flt-32
after dbl-64.
* sysdeps/unix/sysv/linux/sparc/sparc32/Versions (NLDBL_VERSION):
%define this to to GLIBC_2.4.
* sysdeps/sparc/sparc32/fpu/e_sqrtl.c: New file.
* sysdeps/sparc/sparc32/fpu/s_fabs.c: New file.
* sysdeps/sparc/sparc32/fpu/s_fabsf.S: New file.
* sysdeps/sparc/sparc32/fpu/s_fabsl.c: New file.
* sysdeps/sparc/sparc32/soft-fp/q_qtoui.c: Removed.
* sysdeps/sparc/sparc32/soft-fp/q_qtoux.c: Removed.
* sysdeps/sparc/sparc32/soft-fp/q_qtox.c: Removed.
* sysdeps/sparc/sparc32/soft-fp/q_uitoq.c: Removed.
* sysdeps/sparc/sparc32/soft-fp/q_uxtoq.c: Removed.
* sysdeps/sparc/sparc32/soft-fp/q_xtoq.c: Removed.
* sysdeps/sparc/sparc32/soft-fp/q_lltoq.c: New file.
* sysdeps/sparc/sparc32/soft-fp/q_qtoll.c: New file.
* sysdeps/sparc/sparc32/soft-fp/q_qtou.c: New file.
* sysdeps/sparc/sparc32/soft-fp/q_qtoull.c: New file.
* sysdeps/sparc/sparc32/soft-fp/q_ulltoq.c: New file.
* sysdeps/sparc/sparc32/soft-fp/q_utoq.c: New file.
* sysdeps/sparc/sparc32/soft-fp/Versions: New file.
* sysdeps/sparc/fpu/bits/mathinline.h (__unordered_cmp,
__unordered_v9cmp): Define differently depending on
-m32 -mlong-double-{64,128}.
(__signbitl, sqrtl, __ieee754_sqrtl): New inlines.
* sysdeps/sparc/fpu/bits/mathdef.h (__NO_LONG_DOUBLE_MATH): Remove.
* sysdeps/sparc/sparc32/soft-fp/Makefile (sparc32-quad-routines):
Set.
(sysdep-routines): Add sparc32-quad-routines.
* sysdeps/sparc/sparc32/soft-fp/sfp-machine.h: Include stdlib.h.
(FP_HANDLE_EXCEPTIONS): Call ___Q_simulate_exceptions as a normal
function.
* sysdeps/sparc/sparc32/soft-fp/q_sqrt.c (__ieee754_sqrtl): New
alias to _Q_sqrt.
* sysdeps/sparc/sparc32/soft-fp/q_div.c (_Q_div): Fix a typo.
* sysdeps/sparc/sparc64/soft-fp/sfp-machine.h: Include stdlib.h.
* sysdeps/sparc/sparc32/fpu/libm-test-ulps: Update.
* libio/libio.h (_IO_vfscanf, _IO_vfprintf): Remove __THROW.
(_IO_vfwscanf, _IO_vfwprintf): Likewise.
* libio/libioP.h (_IO_vdprintf): Likewise.
buffer. This is not necessary except in debug mode. If we don't
free the buffer but the FILE structure to a list.
(buffer_free): New function. Free buffers or tell _IO_unbuffer_write
to do so.
* libio/libio.h (struct _IO_FILE): Add new members to keep track
of which buffers have to be freed.
it or _GNU_SOURCE is defined.
* io/fcntl.h: Protect *at and AT_* with [__USE_ATFILE] instead of
[__USE_GNU].
* libio/stdio.h: Likewise.
* posix/unistd.h: Likewise.
* time/sys/time.h: Likewise.
fchownat, and unlinkat.
(static-only-routines): Add fstatat and fstatat64.
(tests): Add tst-unlinkat, tst-fstatat, tst-futimesat, tst-renameat,
and tst-fchownat.
* io/Versions [GLIBC_2.4]: Add fchownat, __fxstatat, __fxstatat64,
and unlinkat.
* io/fcntl.h: Define AT_FDCWD, AT_SYMLINK_NOFOLLOW, and AT_REMOVEDIR.
* io/fstatat.c: New file.
* io/fstatat64.c: New file.
* io/sys/stat.h: Declare fstatat, fstatat64, __fxstatat, __fxstatat64
and define fstatat and fstatat64 inline functions.
* libio/stdio.h: Declare renameat.
* misc/Makefile (routines): Add futimesat.
* misc/Versions [GLIBC_2.4]: Add futimesat.
* posix/unistd.h: Declare fchownat and unlinkat.
* stdio-common/Makefile (routines): Add renameat.
* stdio-common/Versions [GLIBC_2.4]: Add renameat.
* sysdeps/generic/fchownat.c: New file.
* sysdeps/generic/futimesat.c: New file.
* sysdeps/generic/fxstatat.c: New file.
* sysdeps/generic/fxstatat64.c: New file.
* sysdeps/generic/renameat.c: New file.
* sysdeps/generic/unlinkat.c: New file.
* sysdeps/unix/sysv/linux/fchownat.c: New file.
* sysdeps/unix/sysv/linux/futimesat.c: New file.
* sysdeps/unix/sysv/linux/fxstatat.c: New file.
* sysdeps/unix/sysv/linux/fxstatat64.c: New file.
* sysdeps/unix/sysv/linux/renameat.c: New file.
* sysdeps/unix/sysv/linux/unlinkat.c: New file.
* sysdeps/unix/sysv/linux/alpha/fxstatat.c: New file.
* sysdeps/unix/sysv/linux/i386/fchownat.c: New file.
* sysdeps/unix/sysv/linux/i386/fxstatat.c: New file.
* sysdeps/unix/sysv/linux/m68k/fchownat.c: New file.
* sysdeps/unix/sysv/linux/m68k/fxstatat.c: New file.
* sysdeps/unix/sysv/linux/powerpc/fchownat.c: New file.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fxstatat.c: New file.
* sysdeps/unix/sysv/linux/s390/s390-32/fchownat.c: New file.
* sysdeps/unix/sysv/linux/s390/s390-32/fxstatat.c: New file.
* sysdeps/unix/sysv/linux/sh/fchownat.c: New file.
* sysdeps/unix/sysv/linux/sh/fxstatat.c: New file.
* sysdeps/unix/sysv/linux/sparc/sparc32/fchownat.c: New file.
* sysdeps/unix/sysv/linux/sparc/sparc32/fxstatat.c: New file.
* sysdeps/unix/sysv/linux/sparc/sparc64/fxstatat.c: New file.
* sysdeps/unix/sysv/linux/wordsize-64/fxstatat.c: New file.
* sysdeps/unix/sysv/linux/wordsize-64/fxstatat64.c: New file.
* time/sys/time.h: Declare futimesat.
* include/fcntl.h: Declare __atfct_seterrno.
* sysdeps/unix/sysv/linux/openat.c (__atfct_seterrno): New function.
Split out from openat code and called.
(do_test): Allow openat to fail with ENOSYS. Handle AT_FDCWD.
* sysdeps/generic/openat.c: Handle AT_FDCWD.
* sysdeps/generic/openat64.c: Likewise.
* io/tst-unlinkat.c: New file.
* io/tst-fstatat.c: New file.
* io/tst-futimesat.c: New file.
* io/tst-renameat.c: New file.
* io/tst-fchownat.c: New file.
* io/tst-openat.c: Don't fail if openat is not implemented.
* sysdeps/unix/sysv/linux/powerpc/chown.c: Don't provide backward
compatibility code if new kernel is guaranteed.
* time/sys/time.h: Add a few nonnull attributes.
Return EOF not 0.
* sysdeps/unix/sysv/linux/readonly-area.c (__readonly_area): Also
allow EACCES errors when opening /rpco for now.
* wctype/wcfuncs.c: Don't use expensive wide char lookups in isw*
functions if character is in ASCII range.
* wctype/wcfuncs_l.c: Likewise.
2005-09-23 Ulrich Drepper <drepper@redhat.com>
[BZ #394]
* libio/fmemopen.c (fmemopen_write): Return 0 instead of -1 if
nothing can be written.
* libio/iofopncook.c (_IO_cookie_write): If something went wrong,
set error bit.
* stdio-common/tst-put-error.c: New file.
* libio/fileops.c (_IO_new_file_xsputn): If overflow fails and no more
data would have to be written signal error.
* libio/oldfileops.c (_IO_old_file_xsputn): Likewise.
* libio/fileops.c (_IO_new_file_overflow): Use NULL not 0.
* include/bits/wchar2.h: New file.
* wcsmbs/wchar.h: Include <bits/wchar2.h> if fortification is
requested.
* wcsmbs/wcsncpy.c: Add __wcsncpy alias.
* string/bits/string3.h: Add fortified stpncpy definitions.
* sysdeps/generic/stpncpy_chk.c: New file.
* libio/vswprintf.c: Move _IO_wstrnfile definition to strfile.h.
Export _IO_wstrn_jumps.
* libio/strfile.h: Define _IO_wstrnfile and declare _IO_wstrn_jumps.
* include/wchar.h: Declare __wcsncpy and __vswprintf_chk.
* debug/fgetws_chk.c: New file.
* debug/fgetws_u_chk.c: New file.
* debug/fwprintf_chk.c: New file.
* debug/swprintf_chk.c: New file.
* debug/vfwprintf_chk.c: New file.
* debug/vswprintf_chk.c: New file.
* debug/vwprintf_chk.c: New file.
* debug/wcpcpy_chk.c: New file.
* debug/wcpncpy_chk.c: New file.
* debug/wcscat_chk.c: New file.
* debug/wcscpy_chk.c: New file.
* debug/wcsncat_chk.c: New file.
* debug/wcsncpy_chk.c: New file.
* debug/wmemcpy_chk.c: New file.
* debug/wmemmove_chk.c: New file.
* debug/wmempcpy_chk.c: New file.
* debug/wmemset_chk.c: New file.
* debug/wprintf_chk.c: New file.
* debug/tst-chk1.c: Add tests for new functions.
* debug/Versions: Export new functions.
* debug/Makefile (routines): Add new functions.
* sysdeps/generic/strchrnul.c: Add cast to avoid warning.
* libio/iofwide.c: Add casts to avoid warnings.
* stdio-common/printf-prs.c (parse_printf_format): Introduce new
variable f to avoid warnings.
* sysdeps/unix/sysv/linux/x86_64/makecontext.c (__makecontext):
Fix a few casts to avoid warnings.
* iconv/gconv_simple.c (internal_utf8_loop): Make start unsigned
to avoid warning.
map if requested.
* debug/chk_fail.c: Request backtrace and memory map dump.
* Versions.def: Add GLIBC_2.4 for libc.
* debug/fgets_chk.c: New file.
* debug/fgets_u_chk.c: New file.
* debug/getcwd_chk.c: New file.
* debug/getwd_chk.c: New file.
* debug/readlink_chk.c: New file.
* debug/read_chk.c: New file.
* debug/pread_chk.c: New file.
* debug/pread64_chk.c: New file.
* debug/recv_chk.c: New file.
* debug/recvfrom_chk.c: New file.
* debug/Versions: Add all new functions with version GLIBC_2.4.
* debug/Makefile (routines): Add fgets_chk, fgets_u_chk, read_chk,
pread_chk, pread64_chk, recv_chk, recvfrom_chk, readlink_chk,
getwd_chk, and getcwd_chk. Plus appropriate CFLAGS definitions.
* debug/tst-chk1.c: Add more tests.
* libio/bits/stdio2.h: Add macros for fgets and fgets_unlocked.
* include/stdio.h: Declare __fgets_chk and __fgets_unlocked_chk.
* posix/unistd.h: Include <bits/unistd.h> for fortification.
* posix/bits/unistd.h: New file.
* posix/Makefile (headers): Add bits/unistd.h.
* socket/sys/socket.h: Include <bits/socket2.h> for fortification.
* socket/bits/socket2.h: New file.
* socket/Makefile (headers): Add bits/socket2.h.
* string/bits/string3.h: Extend memset macro to check for zero 3rd
parameter and use __memset_zero_constant_len_parameter in that case.
* sysdeps/generic/memset_chk.c: Add
__memset_zero_constant_len_parameter alias and linker warning.
* debug/Versions: Add __memset_zero_constant_len_parameter to libc
with version GLIBC_2.4.
* sysdeps/generic/bits/types.h: Don't unnecessarily use __extension__
in __STD_TYPE definition.
2005-02-21 Jakub Jelinek <jakub@redhat.com>
* malloc/malloc.c (malloc_printerr): If MALLOC_CHECK_={5,7}, print
the error message rather than program name.
2005-02-21 Ulrich Drepper <drepper@redhat.com>
* intl/dcigettext.c (_nl_find_msg): Add a cast.
* nis/nis_clone_dir.c (nis_clone_directory): Use char * for ADDR.
* nis/nis_clone_obj.c (nis_clone_object): Likewise.
* nis/nis_clone_res.c (nis_clone_result): Likewise.
* resolv/nss_dns/dns-network.c (getanswer_r): Use const unsigned char *
for END_OF_MESSAGE and CP.
* resolv/res_send.c (send_dg): Add else branch for case impossible
unless `poll' is buggy.
* crypt/crypt_util.c (__setkey_r): Add a cast.
* locale/programs/linereader.c (get_toplvl_escape): Use size_t for
NBYTES, and unsigned char * for BYTES.
* locale/programs/charmap.c (charmap_new_char): Use size_t and
unsighed char * for NBYTES, BYTES parameters.
* sysdeps/generic/dl-hash.h (_dl_elf_hash): Take const char * argument
and cast it.
* sysdeps/i386/i686/dl-hash.h (_dl_elf_hash): Likewise.
* sunrpc/create_xid.c (_create_xid): Don't use unsigned long for RES.
* sunrpc/svcauth_des.c (_svcauth_des): Fix cast type.
* sunrpc/auth_des.c (authdes_create): Don't use u_char for PKEY_DATA.
(authdes_marshal): Don't use unsigned int for LEN.
* sunrpc/xdr.c (xdr_hyper): Don't use unsigned long for T2.
(xdr_u_hyper): Likewise.
(xdr_u_short): Don't use u_long for L.
* sunrpc/xdr_intXX_t.c (xdr_int64_t): Don't use uint32_t for T2.
* inet/rexec.c (rexec_af): Use socklen_t.
* sunrpc/key_call.c (getkeyserv_handle): Likewise.
* sunrpc/rtime.c (rtime): Likewise.
* resolv/res_send.c (send_vc, send_dg): Likewise.
* nis/nis_callback.c (__nis_create_callback): Likewise.
* sysdeps/generic/libc-start.c: Use unsigned int for nthreads ptr.
* sysdeps/posix/getaddrinfo.c (gaih_inet): Fix type of ADDR local.
* libio/libio.h (_IO_BE): Add parenthesis around EXPR.
* intl/dcigettext.c (INTVARDEF, INTUSE): Macros removed.
(_nl_default_dirname): Use libc_hidden_data_def instead of INTVARDEF.
(libc_freeres_fn, DCIGETTEXT): Don't use INTUSE.
* intl/bindtextdom.c (INTUSE): Macro removed.
(_nl_default_dirname): Use libc_hidden_proto.
(set_binding_values): Don't use INTUSE.
* include/libintl.h (_libc_intl_domainname_internal): Decl removed.
(_libc_intl_domainname): Use libc_hidden_proto.
* posix/regex_internal.h (gettext): Remove INTUSE on it.
* locale/SYS_libc.c (_libc_intl_domainname): Use libc_hidden_data_def
rather than INTDEF.
* include/libintl.h (_): Don't use *_internal name.
* ctype/ctype-extn.c (__ctype_tolower, __ctype_toupper): Use int32_t,
not uint32_t.
* locale/lc-ctype.c (_nl_postload_ctype): Likewise for assignments.
* iconv/gconv_open.c (__gconv_open): Remove useless cast.
[BZ #721]
* sysdeps/i386/dl-machine.h (ELF_MACHINE_NO_RELA): Define this outside
of [RESOLVE_MAP].
* sysdeps/sh/dl-machine.h (ELF_MACHINE_NO_REL): Likewise.
* sysdeps/powerpc/powerpc32/dl-machine.h
(elf_machine_rel, elf_machine_rel_relative): Removed.
* sysdeps/powerpc/powerpc64/dl-machine.h
(elf_machine_rel, elf_machine_rel_relative): Removed.
2005-02-03 Alexandre Oliva <aoliva@redhat.com>
[BZ #721]
* elf/dynamic-link.h: Don't declare nested auto functions that are
not going to be defined.
2004-07-23 Jakub Jelinek <jakub@redhat.com>
[BZ #284]
* include/features.h (_POSIX_SOURCE, _POSIX_C_SOURCE): Define
if _XOPEN_SOURCE >= 500 even if __STRICT_ANSI__ is defined.
2005-02-16 Roland McGrath <roland@redhat.com>
(dtv_t): Change pointer type to be a struct which also contains
information whether the memory pointed to is static TLS or not.
* sysdeps/generic/syslog.c (send_flags) [!send_flags]: Define it.
* shadow/sgetspent_r.c (FALSE): Macro renamed to ...
(FALSEP): ... this. Updated all references.
* libio/fmemopen.c: Include <stdint.h>.
* libio/iofopncook.c (_IO_cookie_seekoff): Define. Mark offset as
invalid to disable optimizations in fileops which won't work here.
(_IO_cookie_jumps): Use it.
(_IO_old_cookie_jumps): Likewise.
* libio/fmemopen.c (fmemopen_seek): Result must be returned in *P,
not the return value.
* stdio-common/Makefile (tests): Add tst-fmemopen2.
* stdio-common/tst-fmemopen2.c: New file.
2004-11-04 Jakub Jelinek <jakub@redhat.com>
* libio/fileops.c (_IO_new_file_seekoff): If mode is 0 and
fp->_offset == _IO_pos_BAD, just call _IO_SYSSEEK (fp, 0, dir)
and if successful set fp->_offset.
* libio/Makefile (tests): Add bug-ungetc3.
* libio/bug-ungetc3.c: New test.
Update.
* libio/vasprintf.c (_IO_vasprintf): Fix condition to decide
whether to realloc or not.
Reported by Pavel Kankovsky <peak@argo.troja.mff.cuni.cz> [BZ #346].
2004-08-10 Jakub Jelinek <jakub@redhat.com>
* libio/bits/stdio.h (fread_unlocked): Cast 0 to (size_t).
(fwrite_unlocked): When checking if size * n is <= 8, cast each
argument to size_t individually. Cast n to (void) instead of
(size_t), surround with (), return (size_t) 0 if one of n or size
is 0. [BZ #316]
* stdio-common/Makefile (tests): Add tst-unlockedio.
* stdio-common/tst-unlockedio.c: New test.
Update.
* libio/bits/stdio.h (fread_unlocked): Add a couple of (size_t)
casts to handle funny calls with floating point argument values
and signed values correctly and without warning.
(fwrite_unlocked): Likewise. [BZ #309]
2004-07-23 Ulrich Drepper <drepper@redhat.com>
* posix/bits/posix1_lim.h: Fix values for _POSIX_CHILD_MAX and
_POSIX_OPEN_MAX. Add _POSIX_HOST_NAME_MAX, _POSIX_SYMLINK_MAX,
_POSIX_SYMLOOP_MAX, and _POSIX_RE_DUP_MAX.
Reported by Andrew Josey.
* include/features.h: Document _POSIX_C_SOURCE == 200112L.
* grp/grp.h: Define gid_t if __USE_XOPEN2K is defined.
* pwd/pwd.h: Define uid_t and gid_t if __USE_XOPEN2K is defined.
* io/sys/stat.h: Define dev_t, gid_t, ino_t, mode_t, nlink_t,
off_t, time_t, and uid_t if __USE_XOPEN2K is defined.
* signal/signal.h: Define pid_t if __USE_XOPEN2K is defined.
* posix/unistd.h: Define gid_t, off_t, pid_t, uid_t, and
useconds_t if __USE_XOPEN2K is defined.
* io/utime.h: Define time_t if __USE_XOPEN2K is defined.
* libio/stdio.h: Declare fseeko and ftello if __USE_XOPEN2K is defined.
2004-05-13 Jakub Jelinek <jakub@redhat.com>
* libio/genops.c (_IO_default_xsputn): Avoid one overflow per char if
count is negative, yet write_ptr < write_end.
(_IO_default_xsgetn): Avoid one underflow per char if count is
negative, yet read_ptr < read_end.
* iconv/gconv_db.c: Don't define lock as static. Rename to
__gconv_lock and export from the file.
* iconv/gconv_int.h: Declare __gconv_lock.
* libio/iofclose.c [_LIBC] (_IO_new_fclose): Lock gconv lock
before __gconv_release_step calls.
Patch by Shunichi Sagawa <s-sagawa@jp.fujitsu.com>.
* iconv/gconv_simple.c (internal_ucs4_loop): Fix typo in last change.
* iconv/gconv_db.c
2003-09-17 Philip Blundell <philb@gnu.org>
* sysdeps/unix/sysv/linux/arm/vfork.S: Branch to fork if
libpthread is loaded. Elide backwards compatibility code when not
required.
2003-09-11 H.J. Lu <hongjiu.lu@intel.com>
* elf/tls-macros.h (TLS_IE): Add a stop bit for ia64.
(TLS_LD): Likewise.
(TLS_GD): Likewise.
2003-09-11 Jakub Jelinek <jakub@redhat.com>
* libio/fileops.c (_IO_new_file_overflow): Add INTUSE to
_IO_free_backup_area call.
* sysdeps/unix/sysv/linux/tcgetattr.c (__tcgetattr): Fill in c_ispeed
and c_ospeed fields.
* sysdeps/unix/sysv/linux/speed.c (cfsetospeed): Set c_ospeed field.
(cfsetispeed): Set c_ispeed field.
* sysdeps/unix/sysv/linux/tcsetattr.c (IBAUD0): Define unconditionally
to match corresponding speed.c code.
2003-09-06 Ulrich Drepper <drepper@redhat.com>
* libio/wfileops.c (_IO_wfile_underflow): Mark beginning of the
narrow character buffer.
* libio/Makefile: Add rules to build and run bug-ftell.
* libio/bug-ftell.c: New file.
* stdio-common/vfprintf.c: Don't use the first grouping number twice.
* stdio-common/vfscanf.c (vfscanf): Fix recognition of characters
matching the decimal point and possibly leading the thousands
separator. This caused the recognition of thousands separators to
always fail.
2003-09-05 Ulrich Drepper <drepper@redhat.com>
* libio/fileops.c (_IO_new_file_overflow): Handle switching to
write mode from read in backup buffer.
* libio/Makefile (tests): Add bug-ungetc2.
* libio/bug-ungetc2.c: New file.
2003-09-05 Roland McGrath <roland@redhat.com>
>>>>>>> 1.7905
* sysdeps/unix/sysv/linux/linux_fsinfo.h: Define VXFS_SUPER_MAGIC.
2003-08-26 Jakub Jelinek <jakub@redhat.com>
* elf/ldconfig.c (search_dir): When checking for GNU-style .so
link file use the real file name, not the resolved name we got by
following the symlinks.
2003-08-25 Ulrich Drepper <drepper@redhat.com>
* libio/libio.h (_IO_fwide): In the mode==0 optimization, don't
use _mode if _IO_fwide_maybe_incompatible.
* libio/iofwide.c (_IO_fwide): Move the test for mode == 0 after
the compatibility test.
2003-08-25 Jakub Jelinek <jakub@redhat.com>
* elf/cache.c (save_cache): Don't write beyond end of file_entries
buffer.
Duplicate last old cache entry if the count would be odd.
More cancellation handling fixups.
* sysdeps/unix/sysv/linux/not-cancel.h: Add waitpid_not_cancel.
* sysdeps/generic/not-cancel.h: Likewise.
* catgets/open_catalog.c: Use not-cancelable syscalls.
* time/Makefile (CFLAGS-getdate.c): Add -fexceptions.
* sysdeps/unix/sysv/linux/llseek.c: Must not be cancelable.
* sysdeps/unix/syscalls.list: Don't mark lseek as cancelable.
* dlfcn/dlfcn.h: Mark dlopen with __THROW again.
* io/fcntl.h: Don't mark posix_fallocate with __THROW.
* libio/fileops.c: Use not-cancelable syscalls for fclose.
* libio/iopopen.c: Use no-cancelable syscalls.
* libio/stdio.h: Mark popen and pclose with __THROW again.
* misc/Makefile (CFLAGS-syslog.c): Add -fexceptions.
* misc/syslog.c: Fix locking and cancellation cleanup handling.
* posix/unistd.h: Mark ttyname and ttyname_r again with __THROW.
* stdio-common/Makefile (CFLAGS-tmpfile.c, CFLAGS-tmpfile64.c,
CFLAGS-tempname.c): Add -fexceptions.
* stdlib/Makefile (CFLAGS-mkstemp.c): Add -fexceptions.
* string/string.h: Mark strerror and strerror_r with _THROW again.
* sysdeps/generic/unwind.inc: New file. Copied from gcc.
* sysdeps/generic/unwind-dw2.c: Update from gcc version. Remove
#ifs since we now need all the code compiled.
* sysdeps/posix/spawni.c: Use close_not_cancel instead of close.
* sysdeps/unix/closedir.c: Use not-cancelable syscalls.
* sysdeps/unix/opendir.c: Likewise.
2003-05-31 Ulrich Drepper <drepper@redhat.com>
* libio/fileops.c (_IO_file_open): Don't mark as inline.
* sysdeps/ia64/elf/initfini.c ((gmon_initializer): Mark with
attribute used.
