C23 adds various <math.h> function families originally defined in TS
18661-4. Add the exp2m1 and exp10m1 functions (exp2(x)-1 and
exp10(x)-1, like expm1).
As with other such functions, these use type-generic templates that
could be replaced with faster and more accurate type-specific
implementations in future. Test inputs are copied from those for
expm1, plus some additions close to the overflow threshold (copied
from exp2 and exp10) and also some near the underflow threshold.
exp2m1 has the unusual property of having an input (M_MAX_EXP) where
whether the function overflows (under IEEE semantics) depends on the
rounding mode. Although these could reasonably be XFAILed in the
testsuite (as we do in some cases for arguments very close to a
function's overflow threshold when an error of a few ulps in the
implementation can result in the implementation not agreeing with an
ideal one on whether overflow takes place - the testsuite isn't smart
enough to handle this automatically), since these functions aren't
required to be correctly rounding, I made the implementation check for
and handle this case specially.
The Makefile ordering expected by lint-makefiles for the new functions
is a bit peculiar, but I implemented it in this patch so that the test
passes; I don't know why log2 also needed moving in one Makefile
variable setting when it didn't in my previous patches, but the
failure showed a different place was expected for that function as
well.
The powerpc64le IFUNC setup seems not to be as self-contained as one
might hope; it shouldn't be necessary to add IFUNCs for new functions
such as these simply to get them building, but without setting up
IFUNCs for the new functions, there were undefined references to
__GI___expm1f128 (that IFUNC machinery results in no such function
being defined, but doesn't stop include/math.h from doing the
redirection resulting in the exp2m1f128 and exp10m1f128
implementations expecting to call it).
Tested for x86_64 and x86, and with build-many-glibcs.py.
C23 adds various <math.h> function families originally defined in TS
18661-4. Add the log10p1 functions (log10(1+x): like log1p, but for
base-10 logarithms).
This is directly analogous to the log2p1 implementation (except that
whereas log2p1 has a smaller underflow range than log1p, log10p1 has a
larger underflow range). The test inputs are copied from those for
log1p and log2p1, plus a few more inputs in that wider underflow
range.
Tested for x86_64 and x86, and with build-many-glibcs.py.
C23 adds various <math.h> function families originally defined in TS
18661-4. Add the logp1 functions (aliases for log1p functions - the
name is intended to be more consistent with the new log2p1 and
log10p1, where clearly it would have been very confusing to name those
functions log21p and log101p). As aliases rather than new functions,
the content of this patch is somewhat different from those actually
adding new functions.
Tests are shared with log1p, so this patch *does* mechanically update
all affected libm-test-ulps files to expect the same errors for both
functions.
The vector versions of log1p on aarch64 and x86_64 are *not* updated
to have logp1 aliases (and thus there are no corresponding header,
tests, abilist or ulps changes for vector functions either). It would
be reasonable for such vector aliases and corresponding changes to
other files to be made separately. For now, the log1p tests instead
avoid testing logp1 in the vector case (a Makefile change is needed to
avoid problems with grep, used in generating the .c files for vector
function tests, matching more than one ALL_RM_TEST line in a file
testing multiple functions with the same inputs, when it assumes that
the .inc file only has a single such line).
Tested for x86_64 and x86, and with build-many-glibcs.py.
C23 adds various <math.h> function families originally defined in TS
18661-4. Add the log2p1 functions (log2(1+x): like log1p, but for
base-2 logarithms).
This illustrates the intended structure of implementations of all
these function families: define them initially with a type-generic
template implementation. If someone wishes to add type-specific
implementations, it is likely such implementations can be both faster
and more accurate than the type-generic one and can then override it
for types for which they are implemented (adding benchmarks would be
desirable in such cases to demonstrate that a new implementation is
indeed faster).
The test inputs are copied from those for log1p. Note that these
changes make gen-auto-libm-tests depend on MPFR 4.2 (or later).
The bulk of the changes are fairly generic for any such new function.
(sysdeps/powerpc/nofpu/Makefile only needs changing for those
type-generic templates that use fabs.)
Tested for x86_64 and x86, and with build-many-glibcs.py.
I used these shell commands:
../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")
and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 7061 files FOO.
I then removed trailing white space from math/tgmath.h,
support/tst-support-open-dev-null-range.c, and
sysdeps/x86_64/multiarch/strlen-vec.S, to work around the following
obscure pre-commit check failure diagnostics from Savannah. I don't
know why I run into these diagnostics whereas others evidently do not.
remote: *** 912-#endif
remote: *** 913:
remote: *** 914-
remote: *** error: lines with trailing whitespace found
...
remote: *** error: sysdeps/unix/sysv/linux/statx_cp.c: trailing lines
glibc has had exp10 functions since long before they were
standardized; now they are standardized in TS 18661-4 and C2X, they
are also specified there to have a corresponding type-generic macro.
Add one to <tgmath.h>, so fixing bug 26108.
glibc doesn't have other functions from TS 18661-4 yet, but when
added, it will be natural to add the type-generic macro for each
function family at the same time as the functions.
Tested for x86_64.
C2X adds new <math.h> functions for floating-point maximum and
minimum, corresponding to the new operations that were added in IEEE
754-2019 because of concerns about the old operations not being
associative in the presence of signaling NaNs. fmaximum and fminimum
handle NaNs like most <math.h> functions (any NaN argument means the
result is a quiet NaN). fmaximum_num and fminimum_num handle both
quiet and signaling NaNs the way fmax and fmin handle quiet NaNs (if
one argument is a number and the other is a NaN, return the number),
but still raise "invalid" for a signaling NaN argument, making them
exceptions to the normal rule that a function with a floating-point
result raising "invalid" also returns a quiet NaN. fmaximum_mag,
fminimum_mag, fmaximum_mag_num and fminimum_mag_num are corresponding
functions returning the argument with greatest or least absolute
value. All these functions also treat +0 as greater than -0. There
are also corresponding <tgmath.h> type-generic macros.
Add these functions to glibc. The implementations use type-generic
templates based on those for fmax, fmin, fmaxmag and fminmag, and test
inputs are based on those for those functions with appropriate
adjustments to the expected results. The RISC-V maintainers might
wish to add optimized versions of fmaximum_num and fminimum_num (for
float and double), since RISC-V (F extension version 2.2 and later)
provides instructions corresponding to those functions - though it
might be at least as useful to add architecture-independent built-in
functions to GCC and teach the RISC-V back end to expand those
functions inline, which is what you generally want for functions that
can be implemented with a single instruction.
Tested for x86_64 and x86, and with build-many-glibcs.py.
We stopped adding "Contributed by" or similar lines in sources in 2012
in favour of git logs and keeping the Contributors section of the
glibc manual up to date. Removing these lines makes the license
header a bit more consistent across files and also removes the
possibility of error in attribution when license blocks or files are
copied across since the contributed-by lines don't actually reflect
reality in those cases.
Move all "Contributed by" and similar lines (Written by, Test by,
etc.) into a new file CONTRIBUTED-BY to retain record of these
contributions. These contributors are also mentioned in
manual/contrib.texi, so we just maintain this additional record as a
courtesy to the earlier developers.
The following scripts were used to filter a list of files to edit in
place and to clean up the CONTRIBUTED-BY file respectively. These
were not added to the glibc sources because they're not expected to be
of any use in future given that this is a one time task:
https://gist.github.com/siddhesh/b5ecac94eabfd72ed2916d6d8157e7dchttps://gist.github.com/siddhesh/15ea1f5e435ace9774f485030695ee02
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
I used these shell commands:
../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")
and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 6694 files FOO.
I then removed trailing white space from benchtests/bench-pthread-locks.c
and iconvdata/tst-iconv-big5-hkscs-to-2ucs4.c, to work around this
diagnostic from Savannah:
remote: *** pre-commit check failed ...
remote: *** error: lines with trailing whitespace found
remote: error: hook declined to update refs/heads/master
The resolution of C floating-point Clarification Request 25
<http://www.open-std.org/jtc1/sc22/wg14/www/docs/n2397.htm#dr_25> is
that the totalorder and totalordermag functions should take pointer
arguments, and this has been adopted in C2X (with const added; note
that the integration of this change into C2X is present in the C
standard git repository but postdates the most recent public PDF
draft).
This patch updates glibc accordingly. As a defect resolution, the API
is changed unconditionally rather than supporting any sort of TS
18661-1 mode for compilation with the old version of the API. There
are compat symbols for existing binaries that pass floating-point
arguments directly. As a consequence of changing to pointer
arguments, there are no longer type-generic macros in tgmath.h for
these functions.
Because of the fairly complicated logic for creating libm function
aliases and determining the set of aliases to create in a given glibc
configuration, rather than duplicating all that in individual source
files to create the versioned and compat symbols, the source files for
the various versions of totalorder functions are set up to redefine
weak_alias before using libm_alias_* macros to create the symbols
required. In turn, this requires creating a separate alias for each
symbol version pointing to the same implementation (see binutils bug
<https://sourceware.org/bugzilla/show_bug.cgi?id=23840>), which is
done automatically using __COUNTER__. (As I noted in
<https://sourceware.org/ml/libc-alpha/2018-10/msg00631.html>, it might
well make sense for glibc's symbol versioning macros to do that alias
creation with __COUNTER__ themselves, which would somewhat simplify
the logic in the totalorder source files.)
It is of course desirable to test the compat symbols. I did this with
the generic libm-test machinery, but didn't wish to duplicate the
actual tables of test inputs and outputs, and thought it risky to
attempt to have a single object file refer to both default and compat
versions of the same function in order to test them together. Thus, I
created libm-test-compat_totalorder.inc and
libm-test-compat_totalordermag.inc which include the generated .c
files (with the processed version of those tables of inputs) from the
non-compat tests, and added appropriate dependencies. I think this
provides sufficient test coverage for the compat symbols without also
needing to make the special ldbl-96 and ldbl-128ibm tests (of
peculiarities relating to the representations of those formats that
can't be covered in the generic tests) run for the compat symbols.
Tests of compat symbols need to be internal tests, meaning _ISOMAC is
not defined. Making some libm-test tests into internal tests showed
up two other issues. GCC diagnoses duplicate macro definitions of
__STDC_* macros, including __STDC_WANT_IEC_60559_TYPES_EXT__; I added
an appropriate conditional and filed
<https://gcc.gnu.org/bugzilla/show_bug.cgi?id=91451> for this issue.
On ia64, include/setjmp.h ends up getting included indirectly from
libm-symbols.h, resulting in conflicting definitions of the STR macro
(also defined in libm-test-driver.c); I renamed the macros in
include/setjmp.h. (It's arguable that we should have common internal
headers used everywhere for stringizing and concatenation macros.)
Tested for x86_64 and x86, and with build-many-glibcs.py.
* math/bits/mathcalls.h
[__GLIBC_USE (IEC_60559_BFP_EXT) || __MATH_DECLARING_FLOATN]
(totalorder): Take pointer arguments.
[__GLIBC_USE (IEC_60559_BFP_EXT) || __MATH_DECLARING_FLOATN]
(totalordermag): Likewise.
* manual/arith.texi (totalorder): Likewise.
(totalorderf): Likewise.
(totalorderl): Likewise.
(totalorderfN): Likewise.
(totalorderfNx): Likewise.
(totalordermag): Likewise.
(totalordermagf): Likewise.
(totalordermagl): Likewise.
(totalordermagfN): Likewise.
(totalordermagfNx): Likewise.
* math/tgmath.h (__TGMATH_BINARY_REAL_RET_ONLY): Remove macro.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (totalorder): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (totalordermag): Likewise.
* math/Versions (GLIBC_2.31): Add totalorder, totalorderf,
totalorderl, totalordermag, totalordermagf, totalordermagl,
totalorderf32, totalorderf64, totalorderf32x, totalordermagf32,
totalordermagf64, totalordermagf32x, totalorderf64x,
totalordermagf64x, totalorderf128 and totalordermagf128.
* math/Makefile (libm-test-funcs-noauto): Add compat_totalorder
and compat_totalordermag.
(libm-test-funcs-compat): New variable.
(libm-tests-compat): Likewise.
(tests): Do not include compat tests.
(tests-internal): Add compat tests.
($(foreach t,$(libm-tests-base),
$(objpfx)$(t)-compat_totalorder.o)): Depend
on $(objpfx)libm-test-totalorder.c.
($(foreach t,$(libm-tests-base),
$(objpfx)$(t)-compat_totalordermag.o): Depend on
$(objpfx)libm-test-totalordermag.c.
(tgmath3-macros): Remove totalorder and totalordermag.
* math/libm-test-compat_totalorder.inc: New file.
* math/libm-test-compat_totalordermag.inc: Likewise.
* math/libm-test-driver.c (struct test_ff_i_data): Update comment.
(RUN_TEST_fpfp_b): New macro.
(RUN_TEST_LOOP_fpfp_b): Likewise.
* math/libm-test-totalorder.inc (totalorder_test_data): Use
TEST_fpfp_b.
(totalorder_test): Condition on [!COMPAT_TEST].
(do_test): Likewise.
* math/libm-test-totalordermag.inc (totalordermag_test_data): Use
TEST_fpfp_b.
(totalordermag_test): Condition on [!COMPAT_TEST].
(do_test): Likewise.
* math/gen-tgmath-tests.py (Tests.add_all_tests): Remove
totalorder and totalordermag.
* math/test-tgmath.c (NCALLS): Change to 132.
(F(compile_test)): Do not call totalorder or totalordermag.
(F(totalorder)): Remove.
(F(totalordermag)): Likewise.
* include/float.h (__STDC_WANT_IEC_60559_TYPES_EXT__): Do not
define if [__STDC_WANT_IEC_60559_TYPES_EXT__].
* include/setjmp.h [!_ISOMAC] (STR_HELPER): Rename to
SJSTR_HELPER.
[!_ISOMAC] (STR): Rename to SJSTR. Update call to STR_HELPER.
[!_ISOMAC] (TEST_SIZE): Update call to STR.
[!_ISOMAC] (TEST_ALIGN): Likewise.
[!_ISOMAC] (TEST_OFFSET): Likewise.
* sysdeps/ieee754/dbl-64/s_totalorder.c: Include <shlib-compat.h>
and <first-versions.h>.
(__totalorder): Take pointer arguments. Add symbol versions and
compat symbols.
* sysdeps/ieee754/dbl-64/s_totalordermag.c: Include
<shlib-compat.h> and <first-versions.h>.
(__totalordermag): Take pointer arguments. Add symbol versions
and compat symbols.
* sysdeps/ieee754/dbl-64/wordsize-64/s_totalorder.c: Include
<shlib-compat.h> and <first-versions.h>.
(__totalorder): Take pointer arguments. Add symbol versions and
compat symbols.
* sysdeps/ieee754/dbl-64/wordsize-64/s_totalordermag.c: Include
<shlib-compat.h> and <first-versions.h>.
(__totalordermag): Take pointer arguments. Add symbol versions
and compat symbols.
* sysdeps/ieee754/float128/float128_private.h
(__totalorder_compatl): New macro.
(__totalordermag_compatl): Likewise.
* sysdeps/ieee754/flt-32/s_totalorderf.c: Include <shlib-compat.h>
and <first-versions.h>.
(__totalorderf): Take pointer arguments. Add symbol versions and
compat symbols.
* sysdeps/ieee754/flt-32/s_totalordermagf.c: Include
<shlib-compat.h> and <first-versions.h>.
(__totalordermagf): Take pointer arguments. Add symbol versions
and compat symbols.
* sysdeps/ieee754/ldbl-128/s_totalorderl.c: Include
<shlib-compat.h> and <first-versions.h>.
(__totalorderl): Take pointer arguments. Add symbol versions and
compat symbols.
* sysdeps/ieee754/ldbl-128/s_totalordermagl.c: Include
<shlib-compat.h> and <first-versions.h>.
(__totalordermagl): Take pointer arguments. Add symbol versions
and compat symbols.
* sysdeps/ieee754/ldbl-128ibm/s_totalorderl.c: Include
<shlib-compat.h>.
(__totalorderl): Take pointer arguments. Add symbol versions and
compat symbols.
* sysdeps/ieee754/ldbl-128ibm/s_totalordermagl.c: Include
<shlib-compat.h>.
(__totalordermagl): Take pointer arguments. Add symbol versions
and compat symbols.
* sysdeps/ieee754/ldbl-96/s_totalorderl.c: Include
<shlib-compat.h> and <first-versions.h>.
(__totalorderl): Take pointer arguments. Add symbol versions and
compat symbols.
* sysdeps/ieee754/ldbl-96/s_totalordermagl.c: Include
<shlib-compat.h> and <first-versions.h>.
(__totalordermagl): Take pointer arguments. Add symbol versions
and compat symbols.
* sysdeps/ieee754/ldbl-opt/nldbl-totalorder.c (totalorderl): Take
pointer arguments.
* sysdeps/ieee754/ldbl-opt/nldbl-totalordermag.c (totalordermagl):
Likewise.
* sysdeps/ieee754/ldbl-128ibm/test-totalorderl-ldbl-128ibm.c
(do_test): Update calls to totalorderl and totalordermagl.
* sysdeps/ieee754/ldbl-96/test-totalorderl-ldbl-96.c (do_test):
Update calls to totalorderl and totalordermagl.
* sysdeps/mach/hurd/i386/libm.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/csky/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/be/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/le/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/riscv/rv64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
If build with -Os on s390x, the test-tgmath fails with:
float functions not called often enough (-10000)
Within compile_testf(), the counter (count_float) is saved
before the complex functions are called.
Afterwards the saved counter differs to the current-counter.
But the tests with the complex functions do not increment count_float!
Instead count_float is saved to a register before calling totalorder
and totalordermag which both increment count_float.
The compiler is allowed to do that as totalorderf and totalordermagf
is declared with __attribute__ ((__const__)) in math/bits/mathcalls.h.
Thus this patch adjusts the global counters to be volatile.
Then count_float is saved after totalordermag.
ChangeLog:
* math/test-tgmath.c (count_double, count_float,
count_ldouble, count_cdouble, count_cfloat,
count_cldouble): Use volatile int.
The tgmath.h totalorder and totalordermag macros wrongly return a
floating-point type. They should return int, like the underlying
functions. This patch fixes them accordingly, updating tests
including enabling tests of those functions from gen-tgmath-tests.py.
Tested for x86_64.
[BZ #21687]
* math/tgmath.h (__TGMATH_BINARY_REAL_RET_ONLY): New macro.
(totalorder): Use it.
(totalordermag): Likewise.
* math/gen-tgmath-tests.py (Tests.add_all_tests): Enable tests of
totalorder and totalordermag.
* math/test-tgmath.c (F(compile_test)): Do not call totalorder or
totalordermag in arguments of calls to those functions.
(NCALLS): Change to 134.
As noted in bug 21607, NO_LONG_DOUBLE conditionals in libm tests are
no longer effective. For most this is harmless - they were only
present because of long double functions not being declared with _LIBC
defined, and _LIBC is no longer defined for building most tests. For
the few where this is actually relevant to the test, testing
LDBL_MANT_DIG > DBL_MANT_DIG is more appropriate as that limits the
test to public APIs. This patch fixes the tests accordingly.
Tested for x86_64 and arm.
[BZ #21607]
* math/basic-test.c [!NO_LONG_DOUBLE]: Change conditionals to
[LDBL_MANT_DIG > DBL_MANT_DIG].
* math/bug-nextafter.c [!NO_LONG_DOUBLE]: Remove conditionals.
* math/bug-nexttoward.c [!NO_LONG_DOUBLE]: Likewise.
* math/test-math-isinff.cc [!NO_LONG_DOUBLE]: Likewise.
* math/test-math-iszero.cc [!NO_LONG_DOUBLE]: Likewise.
* math/test-nan-overflow.c [!NO_LONG_DOUBLE]: Likewise.
* math/test-nan-payload.c [!NO_LONG_DOUBLE]: Likewise.
* math/test-nearbyint-except-2.c [!NO_LONG_DOUBLE]: Likewise.
* math/test-nearbyint-except.c [!NO_LONG_DOUBLE]: Likewise.
* math/test-powl.c [!NO_LONG_DOUBLE]: Likewise.
* math/test-signgam-finite-c99.c [!NO_LONG_DOUBLE]: Likewise.
* math/test-signgam-finite.c [!NO_LONG_DOUBLE]: Likewise.
* math/test-signgam-main.c [!NO_LONG_DOUBLE]: Likewise.
* math/test-snan.c [!NO_LONG_DOUBLE]: Likewise.
* math/test-tgmath-ret.c [!NO_LONG_DOUBLE]: Likewise.
* math/test-tgmath.c: Include <float.h>.
[!NO_LONG_DOUBLE]: Change conditionals to [LDBL_MANT_DIG >
DBL_MANT_DIG].
* math/test-tgmath2.c: Include <float.h>.
[!NO_LONG_DOUBLE]: Change conditionals to [LDBL_MANT_DIG >
DBL_MANT_DIG].
TS 18661-1 defines fromfp functions (fromfp, fromfpx, ufromfp,
ufromfpx, and float and long double variants) to convert from
floating-point to an integer type with any signedness and any given
width up to that of intmax_t, in any of the five IEEE rounding modes
(the usual four for binary floating point, plus rounding to nearest
with ties rounding away from zero), with control of whether in-range
non-integer values should result in the "inexact" exception being
raised. This patch implements these functions for glibc.
These implementations are (apart from raising exceptions) pure integer
implementations; it's entirely possible optimized versions could be
devised for some architectures. A common math/fromfp.h header
provides various common helper code that can readily be shared between
the implementations for different types. For each type, the bulk of
the implementation is also shared between the four functions, with
wrappers that define UNSIGNED and INEXACT macros appropriately before
including the main implementation.
As the functions return intmax_t and uintmax_t without math.h being
allowed to expose those typedef names, they are declared using
__intmax_t and __uintmax_t as obtained from <bits/types.h>.
The FP_INT_* rounding direction macros are defined as ascending
integers in the order the names are listed in the TS; I see no
significant value in allowing architectures to vary the values of
them.
The libm-test machinery is duly adapted to handle unsigned int
arguments, and intmax_t and uintmax_t results. Because each test
input is generally tested for four functions, five rounding modes and
several different widths, the libm-test.inc additions are very large.
Thus, the diffs in the body of this message exclude the libm-test.inc
changes, with the full patch being attached gzipped. The bulk of the
new tests were generated (expanded from a test input plus rounding
results and information about where it lies in the relevant interval
between integers, to libm-test tests for all relevant combinations of
function, rounding direction and width) by a script that's included in
the patch as math/gen-fromfp-tests.py (input data
math/gen-fromfp-tests-inputs); as an ad hoc script that's not really
expected to be rerun, it's not very polished, but it's at least
plausibly useful for adding any further tests for these functions in
future. I may split the libm-test tests up by function in future (so
both libm-test.inc and auto-libm-test-out are split into separate
files, and the tests for each function are also built and run
separately), but not for 2.25.
For no obvious reason, adding tgmath tests for the new functions
resulted in -Wuninitialized errors from test-tgmath.c about the
variable i being used uninitialized. Those errors were correct - the
variable is read by the frexp version in test-tgmath.c (where real
frexp would write through that pointer instead of reading it) - but I
don't know why this patch would result in the pre-existing issue being
newly detected. The patch initializes the variable to avoid those
errors.
With these changes, glibc 2.25 should have all the library features
from TS 18661-1 other than the functions that round result to narrower
type (and constant rounding directions, but I'm considering those
mainly a compiler feature not a library one).
Tested for x86_64, x86, mips64 and powerpc.
* math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(fromfp): New declaration.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (fromfpx): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (ufromfp): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (ufromfpx): Likewise.
* math/tgmath.h (__TGMATH_TERNARY_FIRST_REAL_RET_ONLY): New macro.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (fromfp): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (ufromfp): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (fromfpx): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (ufromfpx): Likewise.
* math/math.h: Include <bits/types.h>.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FP_INT_UPWARD): New enum
constant and macro.
(FP_INT_DOWNWARD): Likewise.
(FP_INT_TOWARDZERO): Likewise.
(FP_INT_TONEARESTFROMZERO): Likewise.
(FP_INT_TONEAREST): Likewise.
* math/Versions (fromfp): New libm symbol at version GLIBC_2.25.
(fromfpf): Likewise.
(fromfpl): Likewise.
(ufromfp): Likewise.
(ufromfpf): Likewise.
(ufromfpl): Likewise.
(fromfpx): Likewise.
(fromfpxf): Likewise.
(fromfpxl): Likewise.
(ufromfpx): Likewise.
(ufromfpxf): Likewise.
(ufromfpxl): Likewise.
* math/Makefile (libm-calls): Add s_fromfpF, s_ufromfpF,
s_fromfpxF and s_ufromfpxF.
* math/gen-fromfp-tests.py: New file.
* math/gen-fromfp-tests-inputs: Likewise.
* math/libm-test.inc: Include <stdint.h>
(check_intmax_t): New function.
(check_uintmax_t): Likewise.
(struct test_fiu_M_data): New type.
(struct test_fiu_U_data): Likewise.
(RUN_TEST_fiu_M): New macro.
(RUN_TEST_LOOP_fiu_M): Likewise.
(RUN_TEST_fiu_U): Likewise.
(RUN_TEST_LOOP_fiu_U): Likewise.
(fromfp_test_data): New array.
(fromfp_test): New function.
(fromfpx_test_data): New array.
(fromfpx_test): New function.
(ufromfp_test_data): New array.
(ufromfp_test): New function.
(ufromfpx_test_data): New array.
(ufromfpx_test): New function.
(main): Call fromfp_test, fromfpx_test, ufromfp_test and
ufromfpx_test.
* math/gen-libm-test.pl (parse_args): Handle u, M and U descriptor
characters.
* math/test-tgmath-ret.c: Include <stdint.h>.
(rm): New variable.
(width): Likewise.
(CHECK_RET_CONST_TYPE): Take extra arguments and pass them to
called function.
(CHECK_RET_CONST_FLOAT): Take extra arguments and pass them to
CHECK_RET_CONST_TYPE.
(CHECK_RET_CONST_DOUBLE): Likewise.
(CHECK_RET_CONST_LDOUBLE): Likewise.
(CHECK_RET_CONST): Take extra arguments and pass them to calls
macros.
(fromfp): New CHECK_RET_CONST call.
(ufromfp): Likewise.
(fromfpx): Likewise.
(ufromfpx): Likewise.
(do_test): Call check_return_fromfp, check_return_ufromfp,
check_return_fromfpx and check_return_ufromfpx.
* math/test-tgmath.c: Include <stdint.h>
(NCALLS): Increase to 138.
(F(compile_test)): Initialize i. Call fromfp functions.
(F(fromfp)): New function.
(F(fromfpx)): Likewise.
(F(ufromfp)): Likewise.
(F(ufromfpx)): Likewise.
* manual/arith.texi (Rounding Functions): Document FP_INT_UPWARD,
FP_INT_DOWNWARD, FP_INT_TOWARDZERO, FP_INT_TONEARESTFROMZERO,
FP_INT_TONEAREST, fromfp, fromfpf, fromfpl, ufromfp, ufromfpf,
ufromfpl, fromfpx, fromfpxf, fromfpxl, ufromfpx, ufromfpxf and
ufromfpxl.
* manual/libm-err-tab.pl (@all_functions): Add fromfp, fromfpx,
ufromfp and ufromfpx.
* math/fromfp.h: New file.
* sysdeps/ieee754/dbl-64/s_fromfp.c: Likewise.
* sysdeps/ieee754/dbl-64/s_fromfp_main.c: Likewise.
* sysdeps/ieee754/dbl-64/s_fromfpx.c: Likewise.
* sysdeps/ieee754/dbl-64/s_ufromfp.c: Likewise.
* sysdeps/ieee754/dbl-64/s_ufromfpx.c: Likewise.
* sysdeps/ieee754/flt-32/s_fromfpf.c: Likewise.
* sysdeps/ieee754/flt-32/s_fromfpf_main.c: Likewise.
* sysdeps/ieee754/flt-32/s_fromfpxf.c: Likewise.
* sysdeps/ieee754/flt-32/s_ufromfpf.c: Likewise.
* sysdeps/ieee754/flt-32/s_ufromfpxf.c: Likewise.
* sysdeps/ieee754/ldbl-128/s_fromfpl.c: Likewise.
* sysdeps/ieee754/ldbl-128/s_fromfpl_main.c: Likewise.
* sysdeps/ieee754/ldbl-128/s_fromfpxl.c: Likewise.
* sysdeps/ieee754/ldbl-128/s_ufromfpl.c: Likewise.
* sysdeps/ieee754/ldbl-128/s_ufromfpxl.c: Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_fromfpl.c: Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_fromfpl_main.c: Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_fromfpxl.c: Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_ufromfpl.c: Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_ufromfpxl.c: Likewise.
* sysdeps/ieee754/ldbl-96/s_fromfpl.c: Likewise.
* sysdeps/ieee754/ldbl-96/s_fromfpl_main.c: Likewise.
* sysdeps/ieee754/ldbl-96/s_fromfpxl.c: Likewise.
* sysdeps/ieee754/ldbl-96/s_ufromfpl.c: Likewise.
* sysdeps/ieee754/ldbl-96/s_ufromfpxl.c: Likewise.
* sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add fromfp,
ufromfp, fromfpx and ufromfpx.
(CFLAGS-nldbl-fromfp.c): New variable.
(CFLAGS-nldbl-fromfpx.c): Likewise.
(CFLAGS-nldbl-ufromfp.c): Likewise.
(CFLAGS-nldbl-ufromfpx.c): Likewise.
* sysdeps/ieee754/ldbl-opt/nldbl-compat.h: Include <stdint.h>.
* sysdeps/ieee754/ldbl-opt/nldbl-fromfp.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-fromfpx.c: Likewise.
* sysdeps/ieee754/ldbl-opt/nldbl-ufromfp.c: Likewise.
* sysdeps/ieee754/ldbl-opt/nldbl-ufromfpx.c: Likewise.
* sysdeps/nacl/libm.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
TS 18661-1 defines roundeven functions that round a floating-point
number to the nearest integer, in that floating-point type, with ties
rounding to even (whereas the round functions round ties away from
zero). As with other such functions, they raise no exceptions apart
from "invalid" for signaling NaNs. There was a previous user request
for this functionality in glibc in
<https://sourceware.org/ml/libc-help/2015-02/msg00005.html>.
This patch implements these functions for glibc. The implementations
use integer bit-manipulation (or roundeven on the high and low parts,
in the IBM long double case). It's possible that there may be faster
approaches on some architectures (in particular, on AArch64 the frintn
instruction should do exactly what's required); I'll leave it to
architecture maintainers or others interested to implement such
architecture-specific versions if desired. (Where architectures have
instructions to round to nearest integer in the current rounding mode,
implementations saving and restoring the rounding mode - and dealing
with exceptions if those instructions generate "inexact" - are also
possible, though their performance depends on the cost of manipulating
exceptions / rounding mode state.)
Tested for x86_64, x86, mips64 and powerpc.
* math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(roundeven): New declaration.
* math/tgmath.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (roundeven): New
macro.
* math/Versions (roundeven): New libm symbol at version
GLIBC_2.25.
(roundevenf): Likewise.
(roundevenl): Likewise.
* math/Makefile (libm-calls): Add s_roundevenF.
* math/libm-test.inc (roundeven_test_data): New array.
(roundeven_test): New function.
(main): Call roundeven_test.
* math/test-tgmath.c (NCALLS): Increase to 134.
(F(compile_test)): Call roundeven.
(F(roundeven)): New function.
* manual/arith.texi (Rounding Functions): Document roundeven,
roundevenf and roundevenl.
* manual/libm-err-tab.pl (@all_functions): Add roundeven.
* include/math.h (roundeven): Use libm_hidden_proto.
* sysdeps/ieee754/dbl-64/s_roundeven.c: New file.
* sysdeps/ieee754/dbl-64/wordsize-64/s_roundeven.c: Likewise.
* sysdeps/ieee754/flt-32/s_roundevenf.c: Likewise.
* sysdeps/ieee754/ldbl-128/s_roundevenl.c: Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_roundevenl.c: Likewise.
* sysdeps/ieee754/ldbl-96/s_roundevenl.c: Likewise.
* sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add
roundeven.
(CFLAGS-nldbl-roundeven.c): New variable.
* sysdeps/ieee754/ldbl-opt/nldbl-roundeven.c: New file.
* sysdeps/nacl/libm.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
TS 18661-1 defines llogb functions that are like ilogb except that
they return long int instead of int. Corresponding FP_LLOGB* macros
are defined, whose values are required to have the obvious
correspondence to those of the FP_ILOGB* macros.
This patch implements these functions and macros for glibc. llogb
uses the type-generic infrastructure, with an implementation similar
to the wrapper for ilogb but with additional conversion from FP_ILOGB*
to FP_LLOGB*; this approach avoids needing to modify or duplicate any
of the architecture-specific ilogb implementations. Tests are also
based on those for ilogb.
Ideally the llogb functions would alias the ilogb ones when long is
32-bit, but such aliasing requires the associated header declarations
of the different-type alias to be hidden, typically by defining macros
before including the header (see e.g. how
sysdeps/ieee754/dbl-64/wordsize-64/s_llround.c defines lround to
__hidden_lround before including <math.h>). The infrastructure for
type-generic function implementations does not support defining such
macros at present (since C code can't define a macro whose name is
determined by other macros). So this patch leaves them as separate
functions (similar to e.g. scalbln and scalbn being separate in such a
case as well), but with the remapping of FP_ILOGB* to FP_LLOGB*
conditioned out in the case where it would be the identity map.
Tested for x86_64, x86, mips64 and powerpc.
* math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (llogb):
New declaration.
* math/tgmath.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (llogb): New
macro.
* math/math.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (__FP_LONG_MAX):
New macro.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FP_LLOGB0): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FP_LLOGBNAN): Likewise.
* math/Versions (llogb): New libm symbol at version GLIBC_2.25.
(llogbf): Likewise.
(llogbl): Likewise.
* math/Makefile (gen-libm-calls): Add w_llogbF.
(tests): Add test-fp-llogb-constants.
* math/w_llogb_template.c: New file. Based on
math/w_ilogb_template.c.
* math/libm-test.inc (llogb_test_data): New array.
(llogb_test): New function.
(main): Call llogb_test.
* math/test-fp-llogb-constants.c: New file. Based on
math/test-fp-ilogb-constants.c.
* math/test-tgmath-ret.c (llogb): New CHECK_RET_CONST call.
(do_test): Call check_return_llogb.
* math/test-tgmath.c (NCALLS): Increase to 126.
(F(compile_test)): Call llogb.
(F(llogb)): New function.
* manual/math.texi (Exponents and Logarithms): Document llogb,
llogbf, llogbl, FP_LLOGB0 and FP_LLOGBNAN.
* manual/libm-err-tab.pl (@all_functions): Add llogb.
* sysdeps/ieee754/ldbl-opt/nldbl-llogb.c: New file.
* sysdeps/ieee754/ldbl-opt/w_llogbl.c: Likewise.
* sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add llogb.
(CFLAGS-nldbl-llogb.c): New variable.
* sysdeps/nacl/libm.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
TS 18661-1 defines totalorder functions implementing the totalOrder
comparison operation from IEEE 754-2008. This patch implements these
functions for glibc, including the type-generic macro in <tgmath.h>.
(The totalordermag functions will be added in a separate patch.)
The description of the totalOrder operation is complicated. However,
for IEEE interchange binary formats and the preferred quiet NaN
convention, what that complicated description means is that you
interpret the representation as a sign-magnitude integer (with -0
coming before +0) and do a <= comparison on that interpretation. For
finite values and infinities the ordering of the sign-magnitude
integers is just the same as the ordering of floating-point values, so
this extends that to all representations. (Different representations
of the same floating-point value - which includes same quantum in the
decimal case - must still be considered equal by this operation, but
that issue doesn't arise for IEEE interchange binary formats.) So the
complications are:
* When MIPS quiet NaN conventions are in use, the representation of
NaNs needs adjusting before making such an integer comparison. This
patch does this adjustment only when both arguments are NaNs, as
there's no need for it if only one is a NaN, and as long as both are
NaNs you can just flip the relevant bits without any problems from
this turning a NaN into an infinity.
* For the m68k version of ldbl-96, where the high mantissa bit is
"don't care" for infinities and NaNs, representations where it
differs must compare the same. Note: although the testcase for this
compiles, I have not actually tested on m68k.
* For ldbl-128ibm, the low part must be ignored when the high part is
NaN, and low parts of +0 and -0 must be considered the same whatever
the high part.
The new tests in libm-test.inc are the first tests there specifying
particular payloads for input NaNs. Separate tests are also added for
the ldbl-96 and ldbl-128ibm special cases where there are different
representations of the same value that must compare equal (which can't
be covered in libm-test.inc as that only specifies values, not
representations).
Tested for x86_64, x86, mips64 and powerpc.
* math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(totalorder): New declaration.
* math/tgmath.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (totalorder):
New macro.
* math/Versions (totalorder): New libm symbol at version
GLIBC_2.25.
(totalorderf): Likewise.
(totalorderl): Likewise.
* math/Makefile (libm-calls): Add s_totalorderF.
* math/gen-libm-test.pl (parse_args): Escape quotes in test name
string.
* math/libm-test.inc (PAYLOAD_DIG): New macro.
(qnan_value_pl): Likewise.
(snan_value_pl): Likewise.
(qnan_value): Define using qnan_value_pl.
(snan_value): Define using snan_value_pl.
(struct test_ff_i_data): Add comment about which tests use this
structure.
(RUN_TEST_ff_b): New macro.
(RUN_TEST_LOOP_ff_b): Likewise.
(totalorder_test_data): New array.
(totalorder_test): New function.
(main): Call totalorder_test.
* math/test-tgmath.c (NCALLS): Increase to 122.
(F(compile_test)): Call totalorder.
(F(totalorder)): New function.
* manual/arith.texi (FP Comparison Functions): Document
totalorder, totalorderf and totalorderl.
* manual/libm-err-tab.pl: Update comment on interfaces without
ulps tabulated.
* sysdeps/ieee754/dbl-64/s_totalorder.c: New file.
* sysdeps/ieee754/dbl-64/wordsize-64/s_totalorder.c: Likewise.
* sysdeps/ieee754/flt-32/s_totalorderf.c: Likewise.
* sysdeps/ieee754/ldbl-128/s_totalorderl.c: Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_totalorderl.c: Likewise.
* sysdeps/ieee754/ldbl-96/s_totalorderl.c: Likewise.
* sysdeps/ieee754/ldbl-opt/nldbl-totalorder.c: Likewise.
* sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add
totalorder.
(CFLAGS-nldbl-totalorder.c): New variable.
* sysdeps/ieee754/ldbl-128ibm/test-totalorderl-ldbl-128ibm.c: New
file.
* sysdeps/ieee754/ldbl-128ibm/Makefile [$(subdir) = math] (tests):
Add test-totalorderl-ldbl-128ibm.
* sysdeps/ieee754/ldbl-96/test-totalorderl-ldbl-96.c: New file.
* sysdeps/ieee754/ldbl-96/Makefile [$(subdir) = math] (tests): Add
test-totalorderl-ldbl-96.
* sysdeps/nacl/libm.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
TS 18661 adds nextup and nextdown functions alongside nextafter to provide
support for float128 equivalent to it. This patch adds nextupl, nextup,
nextupf, nextdownl, nextdown and nextdownf to libm before float128 support.
The nextup functions return the next representable value in the direction of
positive infinity and the nextdown functions return the next representable
value in the direction of negative infinity. These are currently enabled
as GNU extensions.
These tests were skipped by the use-test-skeleton conversion done in
commit 29955b5d because they were reused in other tests via the #include
directive, and so deemed worth an inspection before they were modified.
This has now been done.
ChangeLog:
2015-07-09 Arjun Shankar <arjun.is@lostca.se>
* elf/tst-leaks1.c (main): Converted to ...
(do_test): ... this.
(TEST_FUNCTION): New macro.
Include test-skeleton.c.
* localedata/tst-langinfo.c (main): Converted to ...
(do_test): ... this.
(TEST_FUNCTION): New macro.
Include test-skeleton.c.
* math/test-fpucw.c (main): Converted to ...
(do_test): ... this.
(TEST_FUNCTION): New macro.
Include test-skeleton.c.
* math/test-tgmath.c (main): Converted to ...
(do_test): ... this.
(TEST_FUNCTION): New macro.
Include test-skeleton.c.
* math/test-tgmath2.c (main): Converted to ...
(do_test): ... this.
(TEST_FUNCTION): New macro.
Include test-skeleton.c.
* setjmp/tst-setjmp.c (main): Converted to ...
(do_test): ... this.
(TEST_FUNCTION): New macro.
Include test-skeleton.c.
* stdio-common/tst-sscanf.c (main): Converted to ...
(do_test): ... this.
(TEST_FUNCTION): New macro.
Include test-skeleton.c.
* sysdeps/x86_64/tst-audit6.c (main): Converted to ...
(do_test): ... this.
(TEST_FUNCTION): New macro.
Include test-skeleton.c.
2001-07-06 Paul Eggert <eggert@twinsun.com>
* manual/argp.texi: Remove ignored LGPL copyright notice; it's
not appropriate for documentation anyway.
* manual/libc-texinfo.sh: "Library General Public License" ->
"Lesser General Public License".
2001-07-06 Andreas Jaeger <aj@suse.de>
* All files under GPL/LGPL version 2: Place under LGPL version
2.1.
2001-05-14 Bruno Haible <haible@clisp.cons.org>
* iconvdata/iso-2022-cn-ext.c (BODY for FROM_LOOP): If SO is seen
without previous announcement, reject it regularly, don't abort.
2001-05-16 Ulrich Drepper <drepper@redhat.com>
* math/tgmath.h: Fix handling of int parameters to binary and
ternary functions. Reported by mitr@volny.cz.
* math/test-tgmath.c: Add tests for calls with integer parameters.
* manual/llio.texi: Many grammar and typo fixes to the section on AIO.
